2 Well Design Process.ppt

Well Design Process*
*
*
124.61
Well
Structure
27.7338
DD4DONG
9.45
4.93
4.28
6.63
DPEN
Bit to Resistivity Sensor = 27.7338 m
DRILLING OVERVIEW
NM Stabilizer
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Total Field Strength:
Magnetic Dip:
Declination Date:
Magnetic Declination Model:
North Reference:
Grid North
-3.062°
drilled
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
Surveying Prog:
T-plot inc
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
drilled
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
Surveying Prog:
T-plot inc
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
drilled
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
Surveying Prog:
T-plot inc
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
drilled
Report Date:
Structure / Slot:
Structure / Slot
Borehole:
UWI/API#:
Magnetic Dip:
Declination Date:
North Reference:
Grid North
-3.062°
Surveying Prog:
T-plot inc
Wear
Drill
Re-drill
Ream
*
*
Can scale from PV/VS
documented
Drilling
Petrophysical
Goelogical
Avoid other wells
Drilling
Petrophysics
Geology
What is it?
Do all the design inputs give a satisfactory set of outputs ?
Does the design deliver the client requirement ?
Predict as best we can
Verify the prediction as we drill
*
*
Planned hole sections delivered (casing design and directional plan integrated)
Targets penetrated
Hit targets with a degree of certainty
Collision avoidance
*
North referenced (really HS + Azimuth)
Normal plane scan method
Inform affected 3rd parties of the impact of drilling
Discuss team interfaces
*
Reamers
X-over
Float
NB:
1. Additional spreadsheets can be copied via a right click on the worksheet tabs at the bottom of each page.
2. Motor orders must be accompanied by PowerFit
3. PowerDrive Flex-Joints must be ordered from OMM i.e. on the 'DD Order' form.
Version 9.1
Rig E-Mail:
31-Dec-99
13
A=
0"
E=
1/4"
I=
1/2"
M=
3/4"
14
B=
1/16"
F=
5/16"
J=
9/16"
N=
13/16"
15
C=
1/8"
G=
3/8"
K=
5/8"
O=
7/8"
16
D=
3/16"
H=
7/16"
L=
11/16"
P=
15/16"
17
18
Notes
For any non Anadrill Equipment. eg VGS, Jars, etc. State Vendor
and whether R&M or DSM is ordering in comments below.
Lengths
Include a + (plus) or - (minus) sign to indicate whether longer or
shorter than requested lengths are acceptable.
Attempts will be made to provide as close as requested.
Cell Manager / FSM comments:
Date:
Signature
Bent Sub 1.50º
5 1/2" FH
Steel Spiral DC
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
FOR 'LENGTH SENSITIVE' COMPONENTS PLEASE PROVIDE THE REQUIRED LENGTH. READ NOTES ON 'LENGTHS' FOR USE OF +/- INDICATORS
Motor Order
0
DSM
Bottom Hole Circulating Temperature (Deg C)
MUD MOTORS
Date:
ORDERS WILL NOT BE CONSIDERED UNLESS THE POWERFIT REQUIREMENT IS ATTACHED!
MOTOR SHOP Return Comments :
GST Order
Rig E-Mail:
0
DSM
GST MOTORS
Adjustable bend set to Zero Deg. Maximum adjustable bend can be set to it 0.78 Deg.
Tool
BIT
Adjustable
Bend
Housing
Szr
Sleeve
RAB
Qty
POWERFIT REQUIREMENT ATTACHED?
Date:
FEEDBACK : SHOP to CM / FSM:
Date:
Signature
MWD_LWD Order
Rig Phone #:
0
Measured Depth
Vertical Depth
AIM
Qty
Tool
Ser.
ISONIC
CDR *
ARC*
IMPULSE
Realtime
Pressure
NMR
SMWD
Soft copy of tool utility/repeating frame and survey quality data supplied (Y/N)
Telemetry method
Total G
MTF/GTF Switch(Reg/Lo)
Force Long Surveys
Modifications:
@modulator
http://www.sugar-land.spc.slb.com/spc_open/spc_products/realtime/prediction/signal_main.html
1. Ensure MWD /ADN sub requirements are clear (pin up/down MWD)
IMPULSE
VPWD*
Personality Adaptor Part No.S-269142
3. Watch your tool BHA sequence above. Include DD intention as well.
RAB *
Realtime
x
4. If there are any Toolscope Softaware version issues put into comments.
ILS *
Stress relief/borebacks
Notes: Subs will be shipped to allow a realtime toolstring to be broken and LWD/MWD tools run on their own.
*Ensure extraneous consummables are ordered through stores on an MR, ie BATTERIES, cables, handling tools etc.
Date:
Date:
Signature
PowerDrive Order
inspection level
0
DSM
Ideal Version on Rig?
General
Date:
Signature
&RTool and Collar Order V9.1 September 2002 &CSchlumberger Private
Do not fill in quantity. This will be detemined if Short Hop is required.
SLB: Standard 81 point map will be loaded if electronic version not sent
BHA MU Sheet
BHA Make-Up Sheet
0
GRAPHS
Y
REQUIRED
NB: Components can only be made up to one end of a bent sub.
CONNECTION
ITEM
COPIES TO:
Job File
Sling Numbers
Q.C. Co-ordinator
*
NB:
Version 9.1
Rig E-Mail:
31-Dec-99
13
A=
0"
E=
1/4"
I=
1/2"
M=
3/4"
14
B=
1/16"
F=
5/16"
J=
9/16"
N=
13/16"
15
C=
1/8"
G=
3/8"
K=
5/8"
O=
7/8"
16
D=
3/16"
H=
7/16"
L=
11/16"
P=
15/16"
17
18
Notes
Lengths
Date:
Signature
Bent Sub 1.50º
5 1/2" FH
Steel Spiral DC
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Motor Order
0
DSM
MUD MOTORS
Date:
GST Order
Rig E-Mail:
0
DSM
GST MOTORS
Tool
BIT
Adjustable
Bend
Housing
Szr
Sleeve
RAB
Qty
Date:
Date:
Signature
MWD_LWD Order
Rig Phone #:
0
Measured Depth
Vertical Depth
AIM
Qty
Tool
Ser.
ISONIC
CDR *
ARC*
IMPULSE
Realtime
Pressure
NMR
SMWD
Telemetry method
Total G
Force Long Surveys
Modifications:
@modulator
IMPULSE
VPWD*
RAB *
Realtime
x
ILS *
Date:
Date:
Signature
PowerDrive Order
inspection level
0
DSM
General
Date:
Signature
BHA MU Sheet
BHA Make-Up Sheet
0
GRAPHS
Y
REQUIRED
CONNECTION
ITEM
COPIES TO:
Job File
Sling Numbers
Q.C. Co-ordinator
*
NB:
Version 9.1
Rig E-Mail:
31-Dec-99
13
A=
0"
E=
1/4"
I=
1/2"
M=
3/4"
14
B=
1/16"
F=
5/16"
J=
9/16"
N=
13/16"
15
C=
1/8"
G=
3/8"
K=
5/8"
O=
7/8"
16
D=
3/16"
H=
7/16"
L=
11/16"
P=
15/16"
17
18
Notes
Lengths
Date:
Signature
Bent Sub 1.50º
5 1/2" FH
Steel Spiral DC
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Use Gauge Key
Motor Order
0
DSM
MUD MOTORS
Date:
GST Order
Rig E-Mail:
0
DSM
GST MOTORS
Tool
BIT
Adjustable
Bend
Housing
Szr
Sleeve
RAB
Qty
Date:
Date:
Signature
MWD_LWD Order
Rig Phone #:
0
Measured Depth
Vertical Depth
AIM
Qty
Tool
Ser.
ISONIC
CDR *
ARC*
IMPULSE
Realtime
Pressure
NMR
SMWD
Telemetry method
Total G
Force Long Surveys
Modifications:
@modulator
IMPULSE
VPWD*
RAB *
Realtime
x
ILS *
Date:
Date:
Signature
PowerDrive Order
inspection level
0
DSM
General
Date:
Signature
BHA MU Sheet
BHA Make-Up Sheet
0
GRAPHS
Y
REQUIRED
CONNECTION
ITEM
COPIES TO:
Job File
Sling Numbers
Q.C. Co-ordinator
*
Send the right tools
Ship to rig in time
Be prepared for re-supply
R&M turn around
Discuss rig floor handling
Details of updates required for formal documentation
*
Hydraulic study OK?
N56 38 29.200
E5 19 21.081
April 23, 2004
Hydraulic study OK?
Well
Structure
DD4DONG
12 1/4 " PDC0.4412.253.7512.25
A962M5640XP (1.15 deg)9.299.637.8817.25
NM Stabilizer25.55
Bit to Gamma Ray Sensor = 19.431 m
Bit to Resistivity Sensor = 27.7338 m
DRILLING OVERVIEW
NM Stabilizer15.83
A962M5640XP (1.15 deg)9.73
Inclination in:40.00°To:90.00°
Total Drilled2150.00 mDogleg:2
210 TVD
0 TVD
240 TVD
180 TVD
180 TVD
210 TVD
240 TVD
270 TVD
180 TVD
210 TVD
240 TVD
270 TVD
300 TVD
330 TVD
210 TVD
240 TVD
270 TVD
300 TVD
120 TVD
150 TVD
180 TVD
210 TVD
240 TVD
265 TVD
180 TVD
210 TVD
240 TVD
270 TVD
300 TVD
330 TVD
360 TVD
390 TVD
420 TVD
450 TVD
480 TVD
180 TVD
210 TVD
240 TVD
270 TVD
300 TVD
330 TVD
180 TVD
210 TVD
240 TVD
270 TVD
300 TVD
180 TVD
210 TVD
240 TVD
270 TVD
300 TVD
330 TVD
360 TVD
180 TVD
210 TVD
240 TVD
270 TVD
crest 1
inject 2
inject 1
crest 2
grab 1
driller refresher
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
Vertical Section (m) Azim = 90°, Scale = 1(cm):100(m) Origin = 0 N/-S, 0 E/-W
TVD Scale = 1(cm):100(m)
Our chemical experts will
BGGM 2003 71.943°
N59 0 0.000
W2 0 0.000
August 29, 2003
Drawn By:Current User
Checked By:
Checked Date:
Approved By:
Approved Date:
Location 1 Slot#1Thu 04:11 PM November 06, 2003drill 1 rte90ft
10
Calculation Method:Normal Plane
Ring Interval:10.00 ft
Azimuth Interval:30.00 deg
Oriented EOU Dimension
North
Grid
True
Mag
Mag Dec (-4.947°)
Grid Conv (+0.85719051°)
Rig E-Mail:Inspection Level:
11
13
14
15
16
17
18 Notes
Lengths
Date:
Signature
Cell ManagerDSMR&M
Description
Connections
Hole Size
Planned FlowVertical Depth
POWERFIT DATAPowerfit Information to be entered by Directional Driller in Units Stated
TVD (Ft)
MUD MOTORS
Proposed ship date
Date of Former Order
Date of Order
Rig E-Mail:Inspection Level:
DSMCell Mgr.Date of Former Order
Hole Size Tool Size
Measured DepthBHT deg C
Exact Mud typeMud Density ppg
TSIM Available on Rig?Personality cable / wand on Rig?Ideal Version on Rig?
QTY
S/N
S/N
S/N
QTY
General
Nonmag subs essentialElectronic Map AttachedMagnetic or Gravitational
Is Be Cu forbidden Phase Shift required
Stress relief groovesDigit Time
BorebacksInitial Setting ( Degrees )0
Date:
S/NS/NS/N
1
1
1
MELON
EXTENDER
EXT-M
S/N
VALVE
PROFILESIZEFLOAT
REGULAR /

Date post:	06-Nov-2015
Category:	Documents
Upload:	jose-miguel-vacaflor-illanes
View:	40 times
Download:	1 times

2 Well Design Process.ppt

Documents