2 Wheeled Container SyStemS
www.sulo.com.au 1300 364 388
WHOLE OF LIFE SOLUTIONS
2 Wheeled Container SyStemS
WHOLE OF LIFE SOLUTIONS
Index
About SULO .............................................................. Page 2
Quality Assurance ...................................................... Page 2
80 Litre ........................................................................ Page 3
120 Litre ...................................................................... Page 3
140 Litre ...................................................................... Page 4
240 Litre Standard ...................................................... Page 4
240 Litre KSB .............................................................. Page 5
240 Litre Metal ............................................................ Page 5
360 Litre Kompakt ...................................................... Page 6
360 Litre ToughBin ...................................................... Page 6
Accessories ................................................................ Page 8
Bin Hitch ..................................................................... Page 9
Bin Stand .................................................................... Page 9
Hi-Topp Bin Cap ......................................................... Page 9
2
2 Wheeled Container Systems SULO MGB Australia offers a range of fully certified two wheeled Mobile Garbage Bins (MGBs) specifically designed to suit both domestic and commercial and industrial applications. The range of 2 wheeled MGBs incorporates plastic and galvanised steel options in a variety of sizes ranging from 80 litres right through to 360 litres.
SULO’s plastic two wheeled MGBs are Injection moulded from specially designed and Australian made high density polyethylene (HDPE). The bins are resistant to heat, frost, decay, chemicals and also contain special UV stabilisation to provide excellent aging characteristics, making them suitable for Australian conditions. To ensure there is an MGB available for every application, SULO supplies a newly designed 240 litre metal bin, manufactured from high quality, galvanised steel and available in a powder coated option.
SULO wheelie bins and lids are available in a range of colours that can be ‘mixed and matched’ to suit your specific needs. A full range of accessories are also available to suit the two wheeled container systems.
Two wheeled MGBsStandard colours: Black, Nature Green, Dark Green and Dark Grey
Non Standard Colours: Blue, Yellow, Orange, Red, Brown, Burgundy, Purple, White and Food Grade (opaque)
Quality Assurance Every bin manufactured by SULO is tested and certified to both the Australian and International standards for MGBs, AS 4123 and DIN EN 840.
AS4123 was established in 2008 and provides the Australian waste and recycling industry with a clear standard that calls for independent third party product testing and certification to guarantee product quality. The standard covers all aspects of an MGB and sets a minimum standard for manufacture within Australia to ensure that all MGBs and MGB lifters are compatible.
SULO operates the only Australian MGB testing facility accredited by the National Association of Testing Authorities. The facility is located inside the MGB production plant and is controlled on a daily basis by an onsite Quality Assurance Manager and Quality Assurance Technician. The on-site facility allows SULO to conduct regular in-house product testing as defined by AS 4123 ensuring all MGBs are manufactured to a consistent high quality.
Back to Index
3
TECHNICAL SPECIFICATIONS
Nominal volume 120 litres
Net weight approx 9.3kg
Maximum load 48kg
Permitted total weight 60kg
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
A 930 mm D 545 mm G 480 mm
B 870 mm E 480 mm
C 480 mm F 335 mm
Measurements to be used as a guide only - variations will occur
80 Litre Kompakt Container:Ideal for ‘small waste’ needs
120 Litre Container:The ‘Go Anywhere - All Purpose’ Bin
Adheres to all standards
Multiple applications
Manufactured in accordance with AS4123 Compact dimensions are perfect for limited space
locations High degree of mobility Resistant to UV degradation
Part of a multi-bin system approach Ideal for household waste Reduction of waste through increased diversion of
recyclables
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
Designed for local market
Improved design features
Manufactured in accordance with AS4123 Compact dimensions are perfect for limited space locations High degree of mobility Resistant to UV degradation
Internal concave floor assists emptying
Thicker handle for improved control
Flexibility in bin and lid markings
TECHNICAL SPECIFICATIONS
Nominal volume 80 litres
Net weight approx 85kg
Maximum load 32kg
Permitted total weight 40kg
A 840 mm D 510 mm G 450 mm
B 795 mm E 450 mm
C 480 mm F 300 mm
Measurements to be used as a guide only - variations will occur
Back to Index
4
TECHNICAL SPECIFICATIONS
Nominal volume 140 litres
Net weight approx 10.4kg
Maximum load 56kg
Permitted total weight 70kg
TECHNICAL SPECIFICATIONS
Nominal volume 240 litres
Net weight approx 13kg
Maximum load 496kg
Permitted total weight 110kg
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140L
F G
D
BA
E
C
200
C
GF
BA
D
E
200
B
E GF
A
200
BA
E F G
CD
200
120L80L 240L
CD
140 Litre Kompakt Container:Simply a better bin
Designed for local market
Multiple applications
Manufactured in accordance with AS4123 Stable on uneven surfaces and against wind Larger footprint increases stability Lower centre of gravity
Part of a multi-bin system Assists with waste reduction goals but with the look of
a larger container Ideal for homes, multi-unit dwellings and offices
240 Litre Container: Still Going Strongly
Designed for local market
Multiple applications
Manufactured in accordance with AS412
Certified to International standards for MGBs (EN840)
Resistant to UV degradation Colour range to meet ‘waste stream’
standards
Household refuse Commercial waste Recyclable materials Household organics
A 915 mm D 615 mm G 505 mm
B 870 mm E 535 mm
C 550 mm F 395 mm
Measurements to be used as a guide only - variations will occur
A 1060 mm D 730 mm G 550 mm
B 990 mm E 585 mm
C 660 mm F 400 mm
Measurements to be used as a guide only - variations will occur
Back to Index
5
240 Litre KSB Container:Designed for the Australian Market
Improved design features
Increased strength and durability
Patented Australian design with a specialised lifting structure
Footstep at rear assists in tilting the bin especially with heavy loads
Large easy grip handles for maximum comfort
Specialised lifting columns disperse stress during lifting Dual axle housing provides maximum strength Textured finish on lifting columns for improved grip during
lifting
TECHNICAL SPECIFICATIONS
Nominal volume 240 litres
Net weight approx 12.5kg
Maximum load 96kg
Permitted total weight 110kg (incl. bin)
240 Metal Container:Commercial and Industrial applications
A 1060 mm D 730 mm G 550 mm
B 990 mm E 585 mm
C 660 mm F 400 mm
Measurements to be used as a guide only - variations will occur
Multiple applications
Compatibility
Commercial waste Industrial waste Public place recycling
Utilises standard 240 litre axle Features standard plastic hinge pins Can be fitted with standard 240 litre
plastic lids in multiple colours
250
A BE
D
C
F G
250
A BE
D
C
F G
A 1027 mm D 716 mm G 576 mm
B 990 mm E 576 mm
C 649 mm F 427 mm
Measurements to be used as a guide only - variations will occur
TECHNICAL SPECIFICATIONS
Nominal volume 240 litres
Net weight approx 38kg
Maximum load 96kg
Permitted total weight 135kg
Back to Index
6
360 Litre Kompakt:Increasing recycling capacity
Designed for local market
Improved design features
Unique design to suit Australian lifters Increased capacity in a compact foot print Manufactured in accordance with AS4123 Dimensions of lifting zone similar to a 240 litre
Ideal for increased recycling needs Part of a multi bin system approach Assists in achieving waste minimisation goals Increased capacity aids in preventing leakage into the
waste stream
TECHNICAL SPECIFICATIONS
Nominal volume 360 litres
Net weight approx 17kg
Maximum load 144kg
Permitted total weight 159kg
360 Litre Tough Bin:360o whichever way you look at it
A 1100 mm D 865 mm G 650 mm
B 1028 mm E 680 mm
C 780 mm F 520 mmMeasurements to be used as a guide only - variations will occur
Designed for local market
Design innovations:
Rotationally moulded in Australia Easily customised to suit a variety of
applications Manufactured in accordance with
AS4123 Ideal for tough commercial / industrial
applications
Increased capacity in a footprint similar to the 240L MGB, utilises a standard 240L axle
Dimensions of the lifting zone are similar to the 240L MGB
Easy grip handles for maximum comfort
TECHNICAL SPECIFICATIONS
Nominal volume 360 litres
Net weight approx 19kg
Maximum load 144kg
Permitted total weight 159kg
A 1100 mm D 848 mm G 650 mm
B 1028 mm E 680 mm
C 770 mm F 520 mm
Measurements to be used as a guide only - variations will occur
Back to Index
Wheels 250 mm Wheels 250 mm
WHEELS 250 mm diameter for 60 to 240 litre containers For easy manoeuvering
LID IMPRINT A permanent imprint is stamped into the container
MULTI COLOUR PRINTIndividual full colour printing on conatainer lid for maximum customisation
SCREEN PRINTING Individual, single colour marking on body and/or lid
ADHESIVE LABELIndividual markings with exchangeable multicoloured adhesive labels
LID APERTURES
TRIANGULAR LID LOCk For extra security Operated with triangular key in accordance with DIN standard Snap-lock or lock/unlock function
GRAVITY LOCkThe container unlocks automatically when emptied and locks again when lowered.The collector is not required to unlock the bin prior to emptying Also available as a manual lock
PADLOCk DEVICEStandard with all dome containersSuitable for all common types of padlock
ACCESSORIES FOR 2 WhEELEd COnTAInER SySTEMS
Aperture for recycling 150 mm
Recycling aperture
Aperture for recycling 200 mm
PAPER APERTURES Paper slotDisposal of confidential documentsMoulded in for added strength
RECYCLING APERTURES-ROUND 150mm diameter with rubber rosette Suitable for standard bottles 150 or 200 mm diameter without rubber rosette A low cost solution
CHASSIS
Recycling aperture
MARkINGS HOT-FOIL IMPRINT A durable, single colour hot-foil imprint for individual, customised markings on the container body*
7
RECYCLING APERTURES-RECTANGLE Rectangular opening with brushes and cover ringSuitable for the collection of recyclable materials such as plastics, glass and cansRing neatly covers the brush fastenings
Screen printing Hot-foil imprint
Triangular lid lock Triangular lid lock
Gravity lock
Multi coloured print
Padlock device
Hot-foil imprint
LID LOCkS
360 Litre Tough Bin:360o whichever way you look at it
Back to Index
2009
Sub
ject
to te
chni
cal a
men
dmen
ts. *
Min
imum
bat
ch q
uant
ities
req
uire
dc
Sulo MGB Australia Pty ltd123 Wisemans Ferry RoadSomersby NSW 2250AustraliaTel: +61 (0) 2 - 4348 8188Fax: +61 (0) 2 - 4348 8128Internet: www.sulo.com.auE-mail: [email protected]
Sulo – Victorian office1950 Hume HwyCampbellfield VIC 3061AustraliaTel: +61 (0) 3 - 9357 7320Fax: +61 (0) 3 - 9357 7340
Sulo – Queensland office11 Argon StreetSumner Park QlD 4074AustraliaTel: +61 (0) 7 - 3725 5000Fax: +61 (0) 7 - 3725 5099
Sulo-Talbot Po Box 58 962Greenmount, Manukau City 2141New ZealandTel: +64 9 - 968 2180Fax: +64 9 - 968 2188
4 wheeled containers Organics Collection Resource Recovery Systems
Street Furniture Services
Sulo prides itself on being your competent partner for the present and future demands in waste management.
In addition to our comprehensive range of products, we also offer a range of services including transport, assembly
and distribution, field maintenance and RFID insertion.
For more information please contact customer service on 1300 364 388 or [email protected]
S4W
H-6
/09
BiN HitcH
Designed for long or steep driveways
Easily attaches to a standard tow ball
Can remain on the bin at all times
BiN StANd
For public place collection
Galvanised steel for corrosion resistance
120 litre through to 360 litre
option for single or double head to hold one or two bins
Powder coating available
Hi-topp BiN cAp
Bin caps for events
Fits neatly on top of a standard 2 wheel lid
Available in multiple colours to suit the different waste streams
Supports source separation and recycling
Available in 120/140/240 litre sizes
Back to Index