INDAR Series The technical data in this document is subject to change without prior notice. FT01INM01 Rev._ INDAR SP UGP Series Flow: 50 m³/h -8000 m³/h Power: 30 kW -2200 kW TDH: 30 mwc -935 mwc Type: Semi-axial, submersible motor and pump Application: Clean water pumping INDAR SP BF Series Flow: 700 m³/h -8600 m³/h Power: 50 kW -2000 kW TDH: 3 mwc -60 mwc Type: Radial, submersible motor and pump Application: Wastewater and rainwater pumping INDAR SP HE Series Flow: 1150 m³/h -21000 m³/h Power: 50 kW -1000 kW TDH: 3 mwc -25 mwc Type: Propeller, submersible motor and pump Application: Wastewater and rainwater pumping INDAR RO BP Series Flow: 50 m³/h -800 m³/h Power: 30 kW -450 kW TDH: 2 bar – 10 bar Type: Multi-stage, surface, booster pumps Application: Energy recovery systems in reverse osmosis plants Application Areas SP UGP SP BF SP HE RO BP Water supply to cities Water pumping from underground aquifers. Pumping from Rivers. Pumping from tanks. Repumping stations for correcting pressure and flow deficiencies in pipelines. Agriculture. Underground water pumping for irrigation. Pumping from rivers or artificial dams. Repumping stations. Water treatment Sewage and/or industrial water pumping with suspended solids. Installation in tanks or reservoirs. Water treatment plants for industrial use. Pumping stations for floods. Rainwater pumping. Offshore Seawater pumping for fire-fighting services. Seawater pumping for secondary services. Mining. Depletion in wells and aquifers in mines. Industry. Underground water pumping for industrial processes. Pumping from tanks. Desalination. Pumping of Seawater from beach wells. Pumping of Seawater from tanks. Booster pump to be combined with “energy recovery systems”( after water has passed through membranes). Indar Máquinas Hidráulicas, S.L · Barrio Altamira Pol. Industrial Txara S/N · 20200 Beasain · SPAIN · Tel: (+34) 943 028200 · [email protected]· www.ingeteam.com An brand
Transcript
INDAR Series
The
tech
nica
l dat
a in
this
doc
umen
t is
subj
ect t
o ch
ange
with
out p
rior n
otic
e.FT
01IN
M01
Rev
._
INDAR SPUGP SeriesFlow: 50 m³/h -8000 m³/h
Power: 30 kW -2200 kW
TDH: 30 mwc -935 mwc
Type: Semi-axial, submersible motor and pump
Application: Clean water pumping
INDAR SPBF SeriesFlow: 700 m³/h -8600 m³/h
Power: 50 kW -2000 kW
TDH: 3 mwc -60 mwc
Type: Radial, submersible motor and pump
Application: Wastewater and rainwater pumping
INDAR SPHE Series Flow: 1150 m³/h -21000 m³/h
Power: 50 kW -1000 kW
TDH: 3 mwc -25 mwc
Type: Propeller, submersible motor and pump
Application: Wastewater and rainwater pumping
INDAR ROBP SeriesFlow: 50 m³/h -800 m³/h
Power: 30 kW -450 kW
TDH: 2 bar – 10 bar
Type: Multi-stage, surface, booster pumps
Application: Energy recovery systems in reverse osmosis plants
Application Areas SPUGP SPBF SPHE ROBP
Water supply to cities
Water pumping from underground aquifers.
Pumping from Rivers.
Pumping from tanks.
Repumping stations for correcting pressure and flow deficiencies in pipelines.
Agriculture.
Underground water pumping for irrigation.
Pumping from rivers or artificial dams.
Repumping stations.
Water treatment
Sewage and/or industrial water pumping with suspended solids.
Installation in tanks or reservoirs.
Water treatment plants for industrial use.
Pumping stations for floods.
Rainwater pumping.
Offshore
Seawater pumping for fire-fighting services.
Seawater pumping for secondary services.
Mining.
Depletion in wells and aquifers in mines.
Industry.
Underground water pumping for industrial processes.
Pumping from tanks.
Desalination.
Pumping of Seawater from beach wells.
Pumping of Seawater from tanks.
Booster pump to be combined with “energy recovery systems”( after water has passed through membranes).
Type of installation Vertical, vertical with jacket, horizontal, inclined and inverted.
The UGP series of the INDAR SP family is composed of submersible pumps and motors designed for pumping clean water or water with a minimum amount of solids, in a wide range of applications.
The UGP units for clean water consist of a vertical multistage centrifugal pump directly coupled to an electric motor which is also submersible.
The units are specially designed for pumping water in deep wells with small perforation diameters.
The different construction options offered by INDAR MH, together with the range of materials available, make the UGP series a highly-versatile product which provides ideal solutions to an infinite range of applications.
Type of installation Installation in wet wells (quick coupling device), installation in dry pits and transportable installation.
The BF series of the INDAR SP family is composed of submersible pumps and motors designed for pumping water with solids, sewage or rainwater, in a wide range of applications.
The BF pumps are single-stage type with a radial impeller design. Their electrical motor is directly coupled to the pump and is also submersible. They are specially designed for harsh working environments involving urban and industrial sewage and raw water.
The compactly-designed motors include efficient cooling systems to enable the unit to work at its rated power continuously, regardless of whether the group is outside the water or submersed.
The pumps have impellers that allow many solids to pass through to prevent obstruction from material transported in the water. Depending on the type of pump and the quantity of the particles in the water, the propeller can be closed or opened with one, two or more channels.
Type of installationFree discharge, Pressurized or with Non Return Valve discharge, Discharge with siphon and long pipe discharge, Jacketed H type - compact design with jacket
The HE series of the INDAR SP family is composed of submersible pumps and motors designed for pumping water with solids in a wide range of applications.
The HE units are single-stage type, with an axial impeller or variable pitch propeller and submersible motor. They are specially designed for harsh working environments involving urban and industrial sewage or rainwater and raw water.
In terms of construction, the pumps have propellers that allow many solids to pass through to prevent obstruction from material transported in the water. The compactly-designed motors include efficient cooling systems to enable the unit to work at its rated power continuously.
Materials stainless steel (316, 904L, Duplex, Super Duplex).
Type of installation Horizontal on surface
The BP series of the INDAR RO family is composed of surface pumps and motors designed for pumping seawater in desalination plants.
The main application of the BP series is in reverse osmosis processes for desalinating seawater and brackish water. These are highly-reliable booster pumps, specially designed to work with high pressures both in terms of suction and pumping.
The water captured from the sea and which is going to be injected in the membranes is divided into two flows: the first goes through the high-pressure pump while the second goes to the pressure recovery devices and then Indar’s booster pump. Afterwards, both flows come together again before entering the membranes. This process can reduce the size of the high-pressure pump and basically improves the efficiency of the desalination process.
The characteristics of this type of application represent a highly-robust pump, able to withstand the hight incoming and outgoing pressures to which it is subjected (up to 90 bar), as well as being highly-reliable, this being one of the main features of the INDAR RO pump family.
