2003 Cluster Server

EMC Support MatrixInteroperability ResultsP/N 300-000-166ECO 84075 Rev C28

Table of ContentsCopyright EMC Corporation 2011...................................................................................................................................................................................................1

EMC's Policies and Requirements for EMC Support Matrix........................................................................................................................................................2

Director Bit/Flag Information..........................................................................................................................................................................................................4

i

Copyright EMC Corporation 2011

Copyright © 2001, 2011 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS". EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANYKIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

Trademark Information

EMC2, EMC, EMC ControlCenter, AlphaStor, ApplicationXtender, Catalog Solution, Celerra, CentraStar, CLARalert, CLARiiON, ClientPak, Connectrix,Co-StandbyServer, Dantz, Direct Matrix Architecture, DiskXtender, Documentum, EmailXtender, EmailXtract, HighRoad, Legato, Legato NetWorker,Navisphere, OpenScale, PowerPath, RepliStor, ResourcePak, Retrospect, Smarts, SnapShotServer, SnapView/IP, SRDF, Symmetrix, TimeFinder, VisualSAN,VSAM Assist, Xtender, Xtender Solutions, and where information lives are registered trademarks and EMC Developers Program, EMC OnCourse, EMCProven, EMC Snap, EMC Storage Administrator, Access Logix, ArchiveXtender, Authentic Problems, Automated Resource Manager, AutoStart, AutoSwap,AVALONidm, C-Clip, Celerra Replicator, Centera, CLARevent, Codebook Correlation Technology, Common Information Model, CopyCross, CopyPoint,DatabaseXtender, Direct Matrix, DiskXtender 2000, EDM, E-Lab, EmailXaminer, Enginuity, eRoom, FarPoint, FLARE, FullTime, Global File Virtualization,Graphic Visualization, InfoMover, Invista, MirrorView, NetWin, NetWorker, OnAlert, Powerlink, PowerSnap, Rainfinity, RecoverPoint, RepliCare, SafeLine, SANAdvisor, SAN Copy, SAN Manager, SDMS, SnapImage, SnapSure, SnapView, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix DMX,UltraPoint, Viewlets, VisualSRM, and WebXtender are trademarks of EMC Corporation. All other trademarks used herein are the property of their respectiveowners.

Copyright EMC Corporation 2011 1

EMC's Policies and Requirements for EMC Support Matrix

EMC's Support Matrix Policies and Requirements

This section describes EMC's policies and requirements for the EMC Support Matrix document.

Purpose and Limitations of this Document

This document is being provided for informational purposes only and may change at any time. This version supercedes and replaces all previous versions. Theinformation is to serve only as a guide for those configurations/products which EMC has qualified. This document identifies and lists various vendor hostsystems and integral components that have been tested and qualified by EMC for use with EMC products. Vendor components include, but are not limited to,host operating systems, HBAs (host bus adapters) and associated drivers, firmware and BIOS; Fibre Channel switches, hubs and bridges. This document alsolists various vendors, cluster software, tape hardware, storage system boot procedures, heterogeneous information storage, and configurations that EMC hastested and/or qualified for use with EMC products.

The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resourcefor system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation, suchas EMC's Host Connectivity Guides, EMC Networked Storage Topology Guide, EMC CLARiiON Open Systems Configuration Guide, relevant vendordocumentation, or contact your EMC Sales or EMC Customer Service representative.

For Symmetrix 4.x support, please look at the Symmetrix 8000 Series section and check the footnotes for model/microcode compatibility. EMC employees canobtain older revisions of ESM containing more Symmetrix 4.x information from the Symmetrix Service Readiness group.

For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To reportany issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. ForE-Lab Interoperability Navigator access through Powerlink:http://powerlink.emc.com/community/tools/index.jhtml?community_id=2&categoryId=esn_builder&categoryName=E-Lab+Navigator. For access through Avatar:http://avatar.eng.emc.com/Avatar.asp.

Policies for Qualifying Systems

Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to systemconfigurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document arenot qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and hostsystems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Servicerepresentative for updates or information not included in this document.

EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and tosimulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.

Policy for Future Qualification of Operating System Software Releases

The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in orderto be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC maytest and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation, contactyour EMC Sales or EMC Customer Service representative.

Policy for End-of-Life Support

EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after thevendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, andcomponents that the vendor has officially declared to have reached end of life as long as support is available from the vendor.

Your Selections:Cluster Software Microsoft Failover Clustering, Microsoft Windows Compute Cluster Server 2003

Storage Array EMC Symmetrix

EMC's Policies and Requirements for EMC Support Matrix 2

Relevant Documentation or Links

Symmetrix DMXSeries ProductInformation

Symmetrix DMX series continues to deliver innovation and advanced capabilities. It provides highly available, high-performance,full mainframe support; and flexible connectivity options, including Fibre Channel, FICON, ESCON, Gigabit Ethernet, and iSCSI.Organizations of all sizes rely on Symmetrix for constant data access, business continuity, and massive consolidation. Availableunder Products > Hardware/Platforms > Symmetrix.

Symmetrix V-MaxSeries ProductInformation

EMC Symmetrix V-Max, the newest series in the Symmetrix family, is a new storage system purpose-built for the virtual datacenter.

Host EnvironmentAnalysis Tool (HEAT)

This is the Support landing page for the Host Environment Analysis Tool (HEAT), an Environmental Analysis Tool. Availableunder Support > Product and Diagnostic Tools > Environment Analysis Tools

Storage TargetRevisions andAdoption Rates

To ensure stable and reliable environments, EMC recommends target codes for each EMC Storage Operating Environment(SOE). This report lists the target codes and customer adoption rates for SOEs: Celerra® DART, Centera® CentraStar®,CLARiiON FLARE®, Invista®, and Symmetrix® Enginuity. Connectrix® target codes are included.

EMC Powerlink Up-to-date technical documents about EMC's products and services, including microcode release notes, product manuals,software release notes and more. See the "Quicklinks" section of the Powerlink home page.

E-Lab Issue Tracker Up-to-date information on EMC product issues that could have an impact on your operations. See the "Tools" section of thePowerlink home page.

EMC's Policies and Requirements for EMC Support Matrix

EMC's Policies and Requirements for EMC Support Matrix 3

http://powerlink.emc.com








http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/ActualCodes.pdf





Director Bit/Flag Information

Operating Environments that only require Base Topologies are not listed. All the Operating Environments listed in the table require the Base Topologiesand the additional settings specified for the Operating Environment. Optional Director Bit Settings include settings for special use or to enable optionalfunctionality (refer to footnotes for uses). Optional Director Bits may also be used to identify tolerant values when an Operating System is used in aheterogeneous environment having the same Required Director Bits. In situations that require multiple combinations of director bits on the same port, thepreferred method is to utilize Solutions Enabler where supported to apply settings on an initiator WWN basis.

For FC Loop Base Topology (FC-AL), please enable the EAN (Enable Auto Negotiation) and UWN (Unique WWN) bits.

For FC Switch Base Topology (FC-SW), please enable the EAN (Enable Auto Negotiation), PP (Point-to-Point) and UWN (Unique WWN) bits.

No specific bit is required for iSCSI environment, with the following exception: VCM bit in DMX and ACLX bit in Symmetrix VMAX is required to enable theiSCSI initiator access login and, optionally, the iSCSI Challenge Handshake Authentication Protocol (CHAP) security configuration.

For Symmetrix DMX volume masking (VCM), please enable the VCM bit. For Symmetrix VMAX volume masking, please enable ACLX bit. For allSymmetrix arrays, Cluster configurations require the same underlying Operating System director bits noted here in addition to any noted in the ClusterSoftware table.

No. Operating System TopologyRequired Director Bit

SettingOptional Director Bit

SettingStorage Operating

EnvironmentStorageArray Comments

1 Asianux AX [32-Bit] 1.0:GA60, 61, SP162, 63, SP264,65, SP366, 67;

Asianux AX [AMD64] 1.0:SP264, 65, SP367;

Asianux AX [EM64T] 1.0:GA62, 63, SP264, 65, SP366,67;

Asianux AX [IA64] 1.0 GA68

FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name

(OS2007) Host SCSICompliance 2007; (VCM)Enable Fibrepath on thiePort

EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94; EMCEnginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrix:DMX-3,DMX-4





FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name

(VCM) Enable Fibrepath onthie Port

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3





FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name


EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28

EMCSymmetrix8000 Series





FC-AL80;FC-SW

(C) Common Serial Number;(UWN) Unique World WideName


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33






FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name




6 FC-SW

Director Bit/Flag Information 4

Asianux AX [32-Bit] 1.0:GA60, 61, SP162, 63, SP264,65, SP366, 67;




(C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3





FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name


EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28



Asianux AX [32-Bit] 3.0:SP147, 48, SP347, 82;

Asianux AX [32-Bit]: 3.046, 47,4.0111;

Asianux AX [IA64] 2.0: GA58,59, SP151, 52;

Asianux AX [IA64]: 3.0 SP147,48, 3.046, 47;

Asianux AX [x86_64] 2.0:GA57, 58, SP151, 52, SP249,50, SP39, 10;

Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;

Oracle Linux [32-Bit] 4: U4,U5, U6, U7, U891, U9126;

Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;

Oracle Linux [x86_64] 4: U4,U5, U6, U7, U891, U9126;

Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;

Red Hat RHEL [32-Bit] 4.0:U2 AS/ES42, U3 AS/ES41, U4AS/ES40;

Red Hat RHEL [32-Bit]: 4.5AS/ES33, 4.6 AS/ES34, 4.7AS/ES35, 4.8 AS/ES92, 4.9AS/ES116, 5.0, 5.1, 5.2, 5.311,5.490, 5.584, 5.6114, 115,5.7108, 6.081, 6.1110;

Red Hat RHEL [IA64] 4.0: U2AS/ES, U3 AS/ES, U4 AS/ES;

Red Hat RHEL [IA64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.0, 5.1, 5.2, 5.311,5.490, 5.584, 5.6114, 115,5.7108;

Red Hat RHEL [IBM Power]:4.5 AS33, 4.6 AS34, 4.7 AS,4.8 AS92, 4.9 AS116, 5.036,5.137, 5.238, 5.311, 5.490,5.584, 6.081;

Red Hat RHEL [s390-31-Bit]4.0: U2 AS29, 30, U3 AS/ES30,31, U4 AS/ES30, 32;

FC-AL80;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(OS2007) Host SCSICompliance 2007

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX



Red Hat RHEL [s390-31-Bit]:4.5 AS/ES33, 4.6 AS/ES30, 34,4.7 AS/ES30, 35;

Red Hat RHEL [s390x-64-Bit]4.0: U2 AS29, 30, U3 AS/ES30,31, U4 AS/ES30, 32;

Red Hat RHEL [s390x-64-Bit]:4.5 AS/ES33, 4.6 AS/ES30, 34,4.7 AS/ES30, 35, 5.0 AS/ES36,5.1 AS/ES37, 5.238;

Red Hat RHEL [x86_64] 4.0:U2 AS/ES, U3 AS/ES, U4AS/ES;

Red Hat RHEL [x86_64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.0, 5.1, 5.2, 5.311,5.490, 5.584, 5.6114, 115,5.7108, 6.081, 6.1110;

SuSE SLES [32-Bit]: 10, 10SP121, 22, 10 SP221, 23, 10SP321, 87, 88, 89, 10 SP421, 88,89, 112, 11 SP183, 111, 9SP317, 20, 9 SP417;

SuSE SLES [IA64]: 10, 10SP1, 10 SP2, 10 SP387, 10SP4112, 11 SP183, 111, 9SP317, 9 SP417, 18;

SuSE SLES [IBM Power] 10:SP125, SP2, SP387, SP4112;

SuSE SLES [IBM Power]:1024, 11 SP183, 111, 9 SP317,19, 9 SP417, 18;

SuSE SLES [s390-31-Bit]: 10SP125, 1024, 9 SP3v2.6.5-7.24417, 9 SP3+v2.6.5-7.25217, 9 SP417, 18;

SuSE SLES [s390x-64-Bit]10: SP125, 26, 27, SP226, 27,28;

SuSE SLES [s390x-64-Bit]:1024, 26, 27, 9 SP3v2.6.5-7.24417, 9 SP3+v2.6.5-7.25217, 9 SP417, 18;

SuSE SLES [x86_64]: 10, 10SP121, 22, 10 SP221, 23, 10SP321, 87, 88, 89, 10 SP421, 88,89, 112, 113, 11 SP183, 111, 9SP317, 9 SP417

9 Asianux AX [32-Bit] 2.0:SP151, 52, SP249, 53, SP39,10;


Asianux AX [32-Bit]: 3.046, 47,4.0111;

Asianux AX [IA64]: 2.0 SP151,52, 3.0 SP147, 48, 3.046, 47;

Asianux AX [x86_64] 2.0:SP151, 52, SP249, 50, SP39,10;

Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name



EMCSymmetrixDMX-3



Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;











Red Hat RHEL [x86_64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.0, 5.1, 5.2, 5.311,5.490, 5.584, 5.6114, 115,5.7108, 6.081, 6.1110



Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3













Red Hat RHEL [x86_64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.0, 5.1, 5.2, 5.311,5.490, 5.584, 5.6114, 115,5.7108, 6.081, 6.1110



Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;


FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name



EMCSymmetrixDMX-3























FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance14;(UWN) Unique World Wide


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3



Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;














Name











Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;







Red Hat RHEL [s390-31-Bit]:




EMCSymmetrixDMX-4



4.5 AS/ES33, 4.6 AS/ES30, 34,4.7 AS/ES30, 35;















Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,




EMCSymmetrixDMX-4



5.6109, 5.7102;




Red Hat RHEL [IA64]: 4.5AS/ES, 4.7 AS/ES, 4.8AS/ES92, 4.9 AS/ES116, 5.0,5.1, 5.2, 5.311, 5.490, 5.584,5.6114, 115, 5.7108;
















15 Asianux AX [32-Bit] 2.0:SP151, 52, SP249, 53, SP39,

FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset on


EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,

EMCSymmetrix



10;


Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;

Oracle Linux UEK [x86_64]:5.6107, 5.7104, 6.0106, 6.1103;


Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;












SuSE SLES [32-Bit]: 10, 10SP121, 22, 10 SP221, 23, 10SP321, 87, 88, 89, 10 SP421, 88,

Unit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance96;(UWN) Unique World WideName

.55.60, .58.64, .59.64, .60.65,

.65.69, .68.71, .69.71, .74.75,

.75.75, .80.77, .81.78, .82.78

DMX/DMX-2



89, 112, 11 SP183, 111, 9SP317, 20, 9 SP417;










Asianux AX [32-Bit]: 3.046, 47,4.0111;



Asianux AX [x86_64] 3.0:SP147, 48, SP347, 82;

Asianux AX [x86_64]: 3.046,47, 4.0111;



Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585, 5.6109,5.7102;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585,5.6109, 5.7102;







EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78

EMCSymmetrixDMX/DMX-2


















17 Asianux AX: [32-Bit] 2.0GA57, 58, [IA64] 2.0 GA58, 59,[x86_64] 2.0 GA57, 58;

Red Hat RHEL [32-Bit] 4.0:AS/ES56, U1 AS/ES55;

Red Hat RHEL [IA64] 4.0:AS/ES, U1 AS/ES;

Red Hat RHEL [x86_64] 4.0:AS/ES, U1 AS/ES;

SuSE SLES [32-Bit] 9: GM17,SP117, SP217, 21, 54;

SuSE SLES [IA64] 9: SP117,SP217;

SuSE SLES [x86_64] 9:SP117, SP217

FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name




18 Asianux AX: [32-Bit] 2.0GA57, 58, [IA64] 2.0 GA58, 59,



EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,

EMCSymmetrix



[x86_64] 2.0 GA57, 58;






SuSE SLES [x86_64] 9:SP117, SP217

Unit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name

.91.99, .92.99, .94.102,

.95.103, .99.108, .100.108,

.104.114, .105.115, .111.119,

.112.120, .113.121, .114.121

DMX-3







SuSE SLES [x86_64] 9:SP117, SP217

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name



EMCSymmetrixDMX-3







SuSE SLES [x86_64] 9:SP117, SP217



EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3







SuSE SLES [x86_64] 9:SP117, SP217

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName


EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28





Red Hat RHEL [x86_64] 4.0:

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (UWN)Unique World Wide Name


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33




AS/ES, U1 AS/ES;



SuSE SLES [x86_64] 9:SP117, SP217





SuSE SLES [x86_64] 9:SP117, SP217




EMCSymmetrixDMX-4


Red Hat RHEL [32-Bit] 4.0:AS/ES56, U1 AS/ES55, U2AS/ES42;





SuSE SLES [x86_64] 9:SP117, SP217

FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (UWN)Unique World Wide Name


EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28



Red Hat RHEL [32-Bit] 4.0:AS/ES56, U1 AS/ES55, U2AS/ES42;





SuSE SLES [x86_64] 9:SP117, SP217

FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (UWN)Unique World Wide Name


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


26 Asianux AX: [32-Bit] 4.0111,[x86_64] 4.0111;

Oracle Linux [32-Bit]: 5.6109,5.7102;

Oracle Linux [x86_64]: 5.6109,5.7102;


Red Hat RHEL [32-Bit]: 4.5AS/ES33, 4.6 AS/ES34, 4.7AS/ES35, 4.8 AS/ES92, 4.9AS/ES116, 5.311, 5.490, 5.584,5.6114, 115, 5.7108, 6.081,6.1110;


Red Hat RHEL [IA64]: 4.5

FC-AL80;FC-SW

(C) Common SerialNumber12; (D) DisableQueue Reset on UnitAttention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX



AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116;


Red Hat RHEL [x86_64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.311, 5.490, 5.584,5.6114, 115, 5.7108, 6.081,6.1110;

SuSE SLES [32-Bit] 10:SP221, 23, SP321, 87, 88, 89,SP421, 88, 89, 112;

SuSE SLES [32-Bit]: 11SP183, 111, 9 SP317, 20, 9SP417;

SuSE SLES [x86_64] 10:SP221, 23, SP321, 87, 88, 89,SP421, 88, 89, 112, 113;

SuSE SLES [x86_64]: 11SP183, 111, 9 SP317, 9 SP417

27 Asianux AX: [32-Bit] 4.0111,[x86_64] 4.0111;


Oracle Linux [32-Bit]: 5.6109,5.7102;

Oracle Linux [x86_64]: 5.6109,5.7102;


Red Hat RHEL [32-Bit]: 4.5AS/ES33, 4.6 AS/ES34, 4.7AS/ES35, 4.8 AS/ES92, 4.9AS/ES116, 5.311, 5.490, 5.584,5.6114, 115, 5.7108, 6.081,6.1110;


Red Hat RHEL [IA64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116;


Red Hat RHEL [x86_64]: 4.5AS/ES, 4.6 AS/ES, 4.7AS/ES, 4.8 AS/ES92, 4.9AS/ES116, 5.311, 5.490, 5.584,5.6114, 115, 5.7108, 6.081,6.1110;

SuSE SLES [32-Bit] 10:SP221, 23, SP321, 87, 88, 89,SP421, 88, 89, 112;

SuSE SLES [32-Bit]: 11SP183, 111, 9 SP317, 20, 9SP417;

SuSE SLES [x86_64] 10:SP221, 23, SP321, 87, 88, 89,SP421, 88, 89, 112, 113;

SuSE SLES [x86_64]: 11SP183, 111, 9 SP317, 9 SP417

FC-AL80;FC-SW



EMC Enginuity 5875:.198.148.e, .231.172.e

EMCSymmetrixVMAXe

28 Bull AIX: 5.116, 5.2, 5.3 FC-AL80 (D) Disable Queue Reset onUnit Attention

(ACLX) Initiator Group7; (C)Common Serial Number; (FALOOP ID) FA Loop ID; (H)Enable Hard Addressing;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


29 Bull AIX: 5.116, 5.2, 5.3 FC-AL80 (D) Disable Queue Reset onUnit Attention; (EAN) Enable

(ACLX) Initiator Group7; (C)Common Serial Number; (FA

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,

EMCSymmetrix



Auto Negotiation; (UWN)Unique World Wide Name

LOOP ID) FA Loop ID; (H)Enable Hard Addressing;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

.67.26, .68.27, .68.28 8000 Series

30 Bull AIX: 5.116, 5.2, 5.3 FC-SW (D) Disable Queue Reset onUnit Attention

(ACLX) Initiator Group7; (C)Common Serial Number;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


31 Bull AIX: 5.116, 5.2, 5.3 FC-SW (D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName

(ACLX) Initiator Group7; (C)Common Serial Number;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


32 Bull AIX: 5.116, 5.2, 5.3, 6.1 FC-AL80 (EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 2007; (SPC-2)SPC-2 compliance

EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94



(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 200713; (SPC-2)SPC-2 compliance14

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121




EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


35 Bull AIX: 5.116, 5.2, 5.3, 6.1 FC-SW (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94




EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121




EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


38 Bull AIX: 5.116, 5.2;

IBM AIX: 5.115, 5.2

SCSI (EAN) Enable AutoNegotiation; (T) TaggedCommand97; (UWN) UniqueWorld Wide Name; (W)Wide Transaction97

(ACLX) Initiator Group7 EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


39 Bull AIX: 5.116, 5.2;

IBM AIX: 5.115, 5.2

SCSI (T) Tagged Command97;(W) Wide Transaction97

(ACLX) Initiator Group7 EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


40 Bull AIX: 5.2, 5.3, 6.1 FC-AL80 (EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


41 Bull AIX: 5.2, 5.3, 6.1 FC-SW (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


42 Egenera BladeFrame SW:5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,5.1.1, 5.1.10, 5.1.11, 5.1.12,5.1.13, 5.1.15, 5.1.16, 5.1.17,5.1.18, 5.1.2, 5.1.3, 5.1.5,5.1.8

FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 2007




FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

44 Egenera BladeFrame SW:5.0, 5.0.0.1, 5.0.0.2, 5.0.0.3,

FC-AL80 (C) Common Serial Number;(EAN) Enable Auto

(ACLX) Initiator Group7;(OS2007) Host SCSI

EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,

EMCSymmetrix



5.0.0.4, 5.0.0.5, 5.0.0.6, 5.1,5.1.1, 5.1.10, 5.1.11, 5.1.12,5.1.13, 5.1.15, 5.1.16, 5.1.17,5.1.18, 5.1.2, 5.1.3, 5.1.5,5.1.8

Negotiation; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance96; (UWN)Unique World Wide Name

Compliance 200798 .55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78

DMX/DMX-2


FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name





FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3




EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


48 Egenera BladeFrame SW:5.2, 5.2.2, 5.2.3






FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3




EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78



FC-AL80;FC-SW

(ACLX) Initiator Group; (C)Common Serial Number12;(D) Disable Queue Reset onUnit Attention; (LOOP ID)Loop ID95; (NP) HardAddressing Non-participate;(OS2007) Host SCSICompliance 2007; (OVMS)Open VMS; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SC3) SCSI-3 compliance74;(SPC-2) SPC-2compliance73

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX


FC-AL80;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance

(OS2007) Host SCSICompliance 2007

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX







FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,

EMCSymmetrixDMX-3



Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName

.104.114, .105.115, .111.119,

.112.120, .113.121, .114.121




EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


56 EMC DART 5.4.14 SCSI (ARB) Avoid ResetBroadcast; (EAN) EnableAuto Negotiation; (L) LinkedCommands97; (T) TaggedCommand97; (UWN) UniqueWorld Wide Name; (W)Wide Transaction97; (Y)Synchronous Transaction97



57 EMC DART 5.4.14 SCSI (ARB) Avoid ResetBroadcast; (L) LinkedCommands97; (T) TaggedCommand97; (W) WideTransaction97; (Y)Synchronous Transaction97



58 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.26,5.4.27.2, 5.4.28, 5.4.29,5.4.30, 5.4.31

FC-AL80 (ARB) Avoid ResetBroadcast; (EAN) EnableAuto Negotiation; (UWN)Unique World Wide Name



59 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.26,5.4.27.2, 5.4.28, 5.4.29,5.4.30, 5.4.31

FC-AL80;FC-SW

(ARB) Avoid ResetBroadcast



60 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.26,5.4.27.2, 5.4.28, 5.4.29,5.4.30, 5.4.31

FC-SW (ARB) Avoid ResetBroadcast; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName



61 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.27.2,5.4.28, 5.4.29, 5.4.30, 5.4.31


(ACLX) Initiator Group7 EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121;EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-3

62 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.27.2,5.4.28, 5.4.29, 5.4.30, 5.4.31


(ACLX) Initiator Group7 EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94; EMCEnginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-4

63 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.27.2,5.4.28, 5.4.29, 5.4.30, 5.4.31



EMCSymmetrixDMX-3

64 EMC DART: 5.4.14, 5.4.15,5.4.16, 5.4.17, 5.4.18,5.4.19.4, 5.4.20, 5.4.21.4,5.4.22, 5.4.22.2, 5.4.23,5.4.24.8, 5.4.25, 5.4.27.2,5.4.28, 5.4.29, 5.4.30, 5.4.31


(ACLX) Initiator Group7 EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94; EMCEnginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,

EMCSymmetrixDMX-4



.168.115, .175.122

65 EMC DART: 5.5.19.4,5.5.20.1, 5.5.21.4, 5.5.22.1,5.5.22.2, 5.5.23.0, 5.5.23.2,5.5.24, 5.5.24.2, 5.5.25,5.5.26, 5.5.26.4, 5.5.27,5.5.28, 5.5.29, 5.5.29.1,5.5.30, 5.5.30.5, 5.5.31,5.5.32, 5.5.33, 5.5.34, 5.5.35,5.5.36.2


(ACLX) Initiator Group7 EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


66 EMC DART: 5.5.19.4,5.5.20.1, 5.5.21.4, 5.5.22.1,5.5.22.2, 5.5.23.0, 5.5.23.2,5.5.24, 5.5.24.2, 5.5.25,5.5.26, 5.5.26.4, 5.5.27,5.5.28, 5.5.29, 5.5.29.1,5.5.30, 5.5.30.5, 5.5.31,5.5.32, 5.5.33, 5.5.34, 5.5.35,5.5.36.2




67 Fujitsu Technology SolutionsBS2000/OSD: V5.0, V6.0,V7.0

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (E)Environment Reports toHost; (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name

(ACLX) Initiator Group7 EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121


68 Fujitsu Technology SolutionsBS2000/OSD: V5.0, V6.0,V7.0;

Fujitsu Technology SolutionsOSD/XC: V1.0, V1.1, V1.2,V2.0, V2.1, V2.2, V3.0




69 Fujitsu Technology SolutionsOSD/XC: V1.0, V1.1, V1.2,V2.0, V2.1, V2.2, V3.0




70 Fujitsu Technology SolutionsOSD/XC: V1.0, V1.1, V1.2,V2.0, V2.1, V2.2, V3.0


(ACLX) Initiator Group7 EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78;EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94; EMCEnginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


71 Hewlett Packard HP-UX 11iv1.0 (HP-UX 11.11)

FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(EAN) Enable AutoNegotiation; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


72 Hewlett Packard HP-UX 11iv2 (HP-UX 11.23)

FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (PP)Enable Point-to-point;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33



FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (NP) HardAddressing Non-participate;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-3


FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (NP) HardAddressing Non-participate;(SPC-2) SPC-2compliance14; (UWN)

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 200713, 100

EMC Enginuity 5771:.68.75101, .81.90101,.83.92101, .86.95101,.87.95101, .91.99101,.92.99101, .94.102101,.95.103101, .99.108101,.100.108101, .104.114101,

EMCSymmetrixDMX-3



Unique World Wide Name;(V) Enable Volume SetAddressing

.105.115101, .111.119101,

.112.120101, .113.121101,

.114.121101


FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-3


FC-AL80 (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (SPC-2)SPC-2 compliance96;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200798

EMC Enginuity 5671:.31.3599, .32.3699, .45.5299,.48.5699, .54.5999, .55.6099,.58.6499, .59.6499, .60.6599,.65.6999, .68.7199, .69.7199,.74.7599, .75.7599, .80.7799,.81.7899, .82.7899



FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (NP) HardAddressing Non-participate;(PP) Enable Point-to-point;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-3


FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (NP) HardAddressing Non-participate;(PP) Enable Point-to-point;(SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 200713, 100

EMC Enginuity 5771:.68.75101, .81.90101,.83.92101, .86.95101,.87.95101, .91.99101,.92.99101, .94.102101,.95.103101, .99.108101,.100.108101, .104.114101,.105.115101, .111.119101,.112.120101, .113.121101,.114.121101

EMCSymmetrixDMX-3


FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-3


FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(NP) Hard AddressingNon-participate; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-4


FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-4


FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007100;(SC3) SCSI-3 compliance

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX

84 Hewlett Packard HP-UX 11i:v1.0 (HP-UX 11.11), v2(HP-UX 11.23)


(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SPC-2) SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;

(EAN) Enable AutoNegotiation; (SPC-2) SPC-2compliance; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-3



(V) Enable Volume SetAddressing




EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28



FC-SW (C) Common Serial Number;(NP) Hard AddressingNon-participate; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-4


FC-SW (C) Common Serial Number;(NP) Hard AddressingNon-participate; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(EAN) Enable AutoNegotiation; (SPC-2) SPC-2compliance96; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78



FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX




EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94





EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

92 Hewlett Packard HP-UX 11i:v1.0 (HP-UX 11.11), v2(HP-UX 11.23), v3 (HP-UX11.31);

IBM AIX: 5.2, 5.3, 6.1, 7.1;

Microsoft Windows 2003Unified Data Storage Server[x64]: Enterprise Edition SP2,Standard Edition SP2;

Microsoft Windows 2003[IA64]: DataCenter SP2,Enterprise Edition SP2,Standard Edition SP2;

Microsoft Windows 2003 [x64]Standard Edition: R2 SP2,SP2;

Microsoft Windows 2003 [x64]Storage Server EnterpriseEdition: R2 SP2, SP2;

Microsoft Windows 2003 [x64]Storage Server StandardEdition: R2 SP2, SP2;

Microsoft Windows 2003 [x86]DataCenter: R2 SP2, SP2;

Microsoft Windows 2003 [x86]Enterprise Edition: R2 SP2,SP2;



Microsoft Windows 2003 [x86]Storage Server: R2 SP2,SP2;

Microsoft Windows 2008 R2SP1: [IA64] for Itanium-BasedSystems, [x64] DataCenter,

FC-SW (ACLX) Initiator Group; (C)Common Serial Number12;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (LOOP ID)Loop ID; (NP) HardAddressing Non-participate;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(8G) Link Speed; (ACLX)Initiator Group; (C) CommonSerial Number12; (D) DisableQueue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (H) Enable HardAddressing; (LOOP ID) LoopID; (NP) Hard AddressingNon-participate; (OS2007)Host SCSI Compliance200798; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance74; (SPC-2)SPC-2 compliance73; (UWN)Unique World Wide Name

EMC Enginuity 5875:.198.148.e, .231.172.e

EMCSymmetrixVMAXe



[x64] Enterprise Edition, [x64]Standard Edition, [x64]Storage Server;

Microsoft Windows 2008 R2:[IA64] for Itanium-BasedSystems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition, [x64]Storage Server;

Microsoft Windows 2008[IA64] for Itanium-Based:Systems, Systems SP2;

Microsoft Windows 2008[x64]: DataCenter,DataCenter SP2, EnterpriseEdition, Enterprise EditionSP2, Standard Edition,Standard Edition SP2,Storage Server, StorageServer SP2, Web Server;

Microsoft Windows 2008[x86]: DataCenter,DataCenter SP2, EnterpriseEdition, Enterprise EditionSP2, Standard Edition,Standard Edition SP2, WebServer;

VMware ESX: 4.0 (vSphere4)69, 93, 94, 4.1 (vSphere 4)69,93, 94, 105, 117, 118, 119, 120;

VMware ESXi: 4.0 (vSphere4)69, 93, 94, 4.1 (vSphere 4)69,93, 94, 105, 117, 118, 119, 120,5.0 (vSphere 5)69, 93, 94, 105

93 Hewlett Packard HP-UX 11i:v1.0 (HP-UX 11.11), v2(HP-UX 11.23), v3 (HP-UX11.31);

Microsoft Windows 2003Unified Data Storage Server[x64]: Enterprise Edition SP2,Standard Edition SP2;










Microsoft Windows 2008 R2SP1: [IA64] for Itanium-BasedSystems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition, [x64]Storage Server;

Microsoft Windows 2008 R2:[IA64] for Itanium-Based

FC-AL80 (ACLX) Initiator Group; (C)Common Serial Number12;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (LOOP ID)Loop ID; (NP) HardAddressing Non-participate;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5875:.198.148.e, .231.172.e

EMCSymmetrixVMAXe



Systems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition, [x64]Storage Server;


Microsoft Windows 2008[x64]: DataCenter,DataCenter SP2, EnterpriseEdition, Enterprise EditionSP2, Standard Edition,Standard Edition SP2,Storage Server, StorageServer SP2, Web Server;


VMware ESX: 4.0 (vSphere4)69, 93, 94, 4.1 (vSphere 4)69,93, 94, 105, 117, 118, 119, 120;


94 Hewlett Packard Open VMS:V6.2, V6.2-1H3, V7.3-2, V8.2,V8.2-1, V8.3, V8.3-1H1

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33; EMCEnginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


95 Hewlett Packard Open VMS:V7.3-2, V8.2, V8.2-1, V8.3,V8.3-1H1

FC-SW (EAN) Enable AutoNegotiation; (OVMS) OpenVMS; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78





EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX



(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SPC-2) SPC-2compliance73

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX



(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SPC-2) SPC-2 compliance;(VCM) Enable Fibrepath onthie Port





(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200713;(SPC-2) SPC-2compliance14; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121


100 Hewlett Packard Tru64 UNIX:V5.1B-0, V5.1B-1, V5.1B-278,V5.1B-3, V5.1B-479

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point;(UWN) Unique World WideName

(ACLX) Initiator Group7;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SPC-2) SPC-2 compliance


EMCSymmetrixDMX-4



(ACLX) Initiator Group7;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200713;(SPC-2) SPC-2compliance14

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-4

102 FC-SW



Hewlett Packard Tru64 UNIX:V5.1B-0, V5.1B-1, V5.1B-278,V5.1B-3, V5.1B-479

(OVMS) Open VMS; (PP)Enable Point-to-point;(UWN) Unique World WideName

(SPC-2) SPC-2compliance96; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78





EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33; EMCEnginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


104 Hewlett Packard Tru64 UNIX:V5.1B-0, V5.1B-1, V5.1B-278,V5.1B-3, V5.1B-479,V5.1B-5127, V5.1B-6128



EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX

105 Hewlett Packard Tru64 UNIX:V5.1B-0, V5.1B-1, V5.1B-278,V5.1B-3, V5.1B-479,V5.1B-5127, V5.1B-6128


(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SPC-2) SPC-2compliance73

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX

106 Hewlett Packard Tru64 UNIX:V5.1B-5127, V5.1B-6128

FC-SW (EAN) Enable AutoNegotiation; (OVMS) OpenVMS; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name

(OS2007) Host SCSICompliance 2007; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201





EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixDMX-4



(ACLX) Initiator Group;(OS2007) Host SCSICompliance 2007; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201


109 IBM AIX 7.1 FC-AL80;FC-SW

(C) Common SerialNumber12; (FA LOOP ID)FA Loop ID95; (OS2007)Host SCSI Compliance2007; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance74; (SPC-2)SPC-2 compliance73

EMC Enginuity 5874 .248.194 EMCSymmetrixVMAX

110 IBM AIX: 5.115, 5.2, 5.3 FC-AL80 (D) Disable Queue Reset onUnit Attention

(ACLX) Initiator Group7; (C)Common Serial Number12;(FA LOOP ID) FA Loop ID;(H) Enable Hard Addressing;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


111 IBM AIX: 5.115, 5.2, 5.3 FC-AL80 (D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (UWN)Unique World Wide Name

(ACLX) Initiator Group7; (C)Common Serial Number12;(FA LOOP ID) FA Loop ID;(H) Enable Hard Addressing;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


112 IBM AIX: 5.115, 5.2, 5.3 FC-SW (D) Disable Queue Reset onUnit Attention

(ACLX) Initiator Group7; (C)Common Serial Number12;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


113 IBM AIX: 5.115, 5.2, 5.3 FC-SW (D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName

(ACLX) Initiator Group7; (C)Common Serial Number12;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(UWN) Unique World WideName

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


114 IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1

FC-AL80 (EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group7; (C)Common Serial Number12;(OS2007) Host SCSICompliance 2007; (SPC-2)SPC-2 compliance

EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94


115 IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1

FC-AL80 (EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group7; (C)Common Serial Number12;(OS2007) Host SCSICompliance 200713; (SPC-2)SPC-2 compliance14

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121


116 FC-AL80



IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1

(EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


117 IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1

FC-SW (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94


118 IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1



EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121


119 IBM AIX: 5.115, 5.2, 5.3, 6.1,7.1



EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


120 IBM AIX: 5.2, 5.3, 6.1, 7.1 FC-AL80 (EAN) Enable AutoNegotiation; (LOOP ID)Loop ID; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


121 IBM AIX: 5.2, 5.3, 6.1, 7.1 FC-AL80;FC-SW

(C) Common SerialNumber12; (LOOP ID) LoopID95; (OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX

122 IBM AIX: 5.2, 5.3, 6.1, 7.1 FC-SW (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


123 IBM AIX: 5.2, 5.3, 6.1, 7.1;

IBM VIOS: 2.1, 2.1.0.10,2.1.1, 2.1.1.10-FP21,2.1.2.10-FP22,2.1.2.12-FP22.1,2.1.2.13-FP22.1 SP-02,2.1.3.10-FP23,2.2.0.10-FP24,2.2.0.11-FP24-SP01,2.2.0.12-FP24-SP02,2.2.0.13-FP24-SP03

FC-AL80;FC-SW

(C) Common SerialNumber12; (FA LOOP ID)FA Loop ID95; (OS2007)Host SCSI Compliance2007; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX

124 IBM AS/400 InternalEmulation iSeries Boot DriveExtender

FC-AL80 (ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only; (EAN) EnableAuto Negotiation; (UWN)Unique World Wide Name




FC-AL80 (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name


EMCSymmetrixDMX-3


FC-AL80 (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name


EMCSymmetrixDMX-4


FC-AL80;FC-SW

(ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only




FC-AL80;SCSI

(ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only; (EAN) EnableAuto Negotiation; (UWN)Unique World Wide Name




FC-SW (ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only; (EAN) Enable





Auto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName


FC-SW (ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point;(UWN) Unique World WideName




FC-SW (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name


EMCSymmetrixDMX-3


FC-SW (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name


EMCSymmetrixDMX-4


SCSI (ARB) Avoid ResetBroadcast; (AS4) AS/400Ports Only; (Z) Set QERR97



134 IBM IBM i: 7.1124, i6.1.1125;

IBM i5/OS [System i]:V5R4M5123, V6R1/i6.1

FC-AL (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


135 IBM IBM i: 7.1124, i6.1.1125;


FC-AL (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201; EMC Enginuity5875: .135.91, .139.93,.198.148, .231.172

EMCSymmetrixVMAX121, 122

136 IBM IBM i: 7.1124, i6.1.1125;


FC-SW (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122


137 IBM IBM i: 7.1124, i6.1.1125;


FC-SW (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201; EMC Enginuity5875: .135.91, .139.93,.198.148, .231.172

EMCSymmetrixVMAX121, 122

138 IBM VIOS: 2.1, 2.1.0.10,2.1.1, 2.1.1.10-FP21,2.1.2.10-FP22,2.1.2.12-FP22.1,2.1.2.13-FP22.1 SP-02,2.1.3.10-FP23,2.2.0.10-FP24,2.2.0.11-FP24-SP01,2.2.0.12-FP24-SP02,2.2.0.13-FP24-SP03

FC-AL80;FC-SW

(C) Common SerialNumber12; (LOOP ID) LoopID95; (OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007;(SC3) SCSI-3 compliance74;(SPC-2) SPC-2compliance73

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX

139 Microsoft Windows 2003Unified Data Storage Server[x64]: Enterprise Edition SP2,Standard Edition SP2;




FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (L) LinkedCommands97; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (T) TaggedCommand97; (UWN) UniqueWorld Wide Name; (W)Wide Transaction97; (Y)Synchronous Transaction97












Microsoft Windows 2003 [x86]Storage Server: R2 SP2, SP2













FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200798;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance96; (UWN)Unique World Wide Name







Microsoft Windows 2003 [x64]

FC-AL80;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (L) LinkedCommands97; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (T) TaggedCommand97; (W) WideTransaction97; (Y)Synchronous Transaction97





Standard Edition: R2 SP2,SP2;




















FC-AL80;FC-SW

(C) Common Serial Number;(OS2007) Host SCSICompliance 2007; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX






FC-AL80;FC-SW


(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94























FC-AL80;FC-SW

(C) Common Serial Number;(SPC-2) SPC-2compliance14

(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200713;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(VCM) Enable Fibrepath onthie Port

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3






Microsoft Windows 2003 [x64]

FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (L) LinkedCommands97; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (T) TaggedCommand97; (UWN) UniqueWorld Wide Name; (W)Wide Transaction97; (Y)Synchronous Transaction97





Storage Server EnterpriseEdition: R2 SP2, SP2;



















FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200798;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance96; (UWN)Unique World Wide Name









FC-AL80;FC-SW


(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point

EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122










Microsoft Windows 2008 R2:[IA64] for Itanium-BasedSystems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition;



Microsoft Windows 2008[x86]: DataCenter,DataCenter SP2, EnterpriseEdition, Enterprise EditionSP2, Standard Edition,Standard Edition SP2, WebServer












Microsoft Windows 2003 [x86]Storage Server: R2 SP2,

FC-AL80;FC-SW

(C) Common SerialNumber12; (OS2007) HostSCSI Compliance 2007;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX



SP2;

Microsoft Windows 2008 R2:[IA64] for Itanium-BasedSystems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition;




149 Microsoft Windows 2008 R2:[IA64] for Itanium-BasedSystems, [x64] DataCenter,[x64] Enterprise Edition, [x64]Standard Edition;




FC-AL80;FC-SW


(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX





FC-AL80;FC-SW



EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94





FC-AL80;FC-SW

(C) Common Serial Number;(OS2007) Host SCSICompliance 200713; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance14


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3








FC-AL80;FC-SW

(C) Common Serial Number;(OS2007) Host SCSICompliance 200798; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance96

(PP) Enable Point-to-point EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


153 Novell Netware 6.5: SP5,SP6, SP7, SP8

FC-AL80;FC-SW

(ACLX) Initiator Group; (C)Common Serial Number; (D)Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX

See3, 4, 5, 6


FC-AL80;FC-SW

(ACLX) Initiator Group; (C)Common Serial Number12;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (LOOP ID)Loop ID; (NP) HardAddressing Non-participate;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing


EMC Enginuity 5875:.198.148.e, .231.172.e

EMCSymmetrixVMAXe

See3, 4, 5, 6


FC-AL80;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX

See3, 4, 5, 6

156 Novell Netware: 6.5, 6.5SP1.1, 6.5 SP2, 6.5 SP3, 6.5SP4, 6.5 SP4a, 6.5 SP5, 6.5SP6, 6.5 SP7, 6.5 SP8

FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName



See3, 4, 5, 6


FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name


EMCSymmetrixDMX-3

See3, 4, 5, 6


FC-AL80 (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance96; (UWN)Unique World Wide Name



See3, 4, 5, 6

159 Novell Netware: 6.5, 6.5SP1.1, 6.5 SP2, 6.5 SP3, 6.5


(ACLX) Initiator Group7 EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,

EMCSymmetrix

See3, 4, 5, 6



SP4, 6.5 SP4a, 6.5 SP5, 6.5SP6, 6.5 SP7, 6.5 SP8

Unit Attention2; (EAN)Enable Auto Negotiation;(UWN) Unique World WideName

.67.26, .68.27, .68.28 8000 Series


FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName



See3, 4, 5, 6


FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name


EMCSymmetrixDMX-3

See3, 4, 5, 6


FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance96; (UWN)Unique World Wide Name



See3, 4, 5, 6


FC-SW (C) Common Serial Number;(D) Disable Queue Reset onUnit Attention2; (EAN)Enable Auto Negotiation;(PP) Enable Point-to-point;(UWN) Unique World WideName



See3, 4, 5, 6

164 Oracle Linux [32-Bit] 4: U4,U5, U6, U7, U891, U9126;

Oracle Linux [32-Bit]: 5.0, 5.1,5.2, 5.38, 5.486, 5.585;


Oracle Linux [x86_64]: 5.0,5.1, 5.2, 5.38, 5.486, 5.585;

Red Hat RHEL [32-Bit]: 5.0,5.1, 5.2;

Red Hat RHEL [IA64]: 5.0,5.1, 5.2, 5.311, 5.490, 5.584,5.6114, 115, 5.7108;






Red Hat RHEL [x86_64]: 5.0,5.1, 5.2;

SuSE SLES [32-Bit]: 10, 10SP121, 22;


SuSE SLES [IBM Power] 10:

FC-AL80;FC-SW

(C) Common SerialNumber12; (D) DisableQueue Reset on UnitAttention; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX



SP125, SP2, SP387, SP4112;





SuSE SLES [x86_64]: 10, 10SP121, 22

165 Oracle Linux UEK [x86_64]:5.6107, 5.7104, 6.0106, 6.1103







EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3


FC-AL80;FC-SW



EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX


FC-AL80;FC-SW



EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX








EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

171 Oracle Linux: [32-Bit] 4U9126, [x86_64] 4 U9126;

Red Hat RHEL [32-Bit]: 4.9AS/ES116, 5.6114, 115;

Red Hat RHEL [IA64]: 4.9AS/ES116, 5.6114, 115;

Red Hat RHEL: [IBM Power]4.9 AS116, [x86_64] 4.9AS/ES116, [x86_64] 5.6114,115;

SuSE SLES: [32-Bit] 10

FC-AL80;FC-SW



EMC Enginuity 5874 .248.194 EMCSymmetrixVMAX



SP421, 88, 89, 112, [IA64] 10SP4112, [IBM Power] 10SP4112, [x86_64] 10 SP421,88, 89, 112, 113

172 Oracle Solaris 10: SPARC,x8675;

Oracle Solaris 11: SPARC,x86;

Oracle Solaris 9 SPARC

FC-AL80;FC-SW


(ACLX) Initiator Group; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200772;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance74;(SPC-2) SPC-2compliance73

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX




FC-AL80;FC-SW


(ACLX) Initiator Group; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200772;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance74;(SPC-2) SPC-2compliance73

EMC Enginuity 5875:.198.148.e, .231.172.e

EMCSymmetrixVMAXe




FC-AL80;FC-SW


(ACLX) Initiator Group; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200772;(SC3) SCSI-3 compliance74;(SPC-2) SPC-2compliance73

EMC Enginuity 5875: .135.91,.139.93, .198.148, .231.172

EMCSymmetrixVMAX



Oracle Solaris: 8 SPARC76,77, 9 SPARC

FC-AL80;FC-SW


(A) Enable Sunapee; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (VCM) EnableFibrepath on thie Port

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28





FC-AL80;FC-SW


(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (OS2007)Host SCSI Compliance2007; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance74; (SPC-2)SPC-2 compliance73; (VCM)Enable Fibrepath on thiePort

EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-3




FC-AL80;FC-SW



EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-3




FC-AL80;FC-SW




EMCSymmetrixDMX-4




FC-AL80;FC-SW


(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SCL)Enable Sunapee; (VCM)Enable Fibrepath on thiePort

EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33





FC-AL80;FC-SW


(D) Disable Queue Reset onUnit Attention; (OS2007)Host SCSI Compliance200772, 98; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance74; (SPC-2)SPC-2 compliance73, 96;(VCM) Enable Fibrepath onthie Port

EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78




FC-AL80;FC-SW


(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 200713, 72;(PP) Enable Point-to-point;(SC3) SCSI-3 compliance74;

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,

EMCSymmetrixDMX-3




(SPC-2) SPC-2compliance14, 73; (VCM)Enable Fibrepath on thiePort

.112.120, .113.121, .114.121

182 Red Hat RHEL [32-Bit] 3.0:U7 AS/ES39, 45, U8 AS/ES39,44;

Red Hat RHEL: [32-Bit] 3.9AS/ES39, 43, [AMD-64] 3.0 U7AS/ES39, [AMD-64] 3.0 U8AS/ES39, [AMD-64] 3.9AS/ES39, [EM64T] 3.0 U7AS/ES39, [EM64T] 3.0 U8AS/ES39, [EM64T] 3.9AS/ES39, [IA64] 3.0 U7AS/ES39, [IA64] 3.0 U8AS/ES39, [IA64] 3.9 AS/ES39

FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name








EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3





EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78




FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name








EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3





EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


188 VMware ESX 3.569 FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SPC-2) SPC-2

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 2007; (SC3)

EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,

EMCSymmetrix:DMX-3,



compliance; (UWN) UniqueWorld Wide Name

SCSI-3 compliance .100.91, .101.91, .103.93,.104.93, .105.94; EMCEnginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

DMX-4

189 VMware ESX 3.569 FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name

(ACLX) Initiator Group7;(OS2007) Host SCSICompliance 200713; (SC3)SCSI-3 compliance

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

190 VMware ESX 3.569 FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name




191 VMware ESX 3.569 FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

192 VMware ESX Server 2.5.569,71

FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group7;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance

EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28








FC-AL80 (C) Common Serial Number;(EAN) Enable AutoNegotiation; (SPC-2) SPC-2compliance14; (UWN)Unique World Wide Name

(ACLX) Initiator Group7;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance14

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3


FC-AL80;FC-SW

(C) Common Serial Number;(SPC-2) SPC-2 compliance


EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33



FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28








FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName

(ACLX) Initiator Group7;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance14

EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

199 VMware ESX: 3.0.369, 70,3.569, Server 2.5.569, 71;

VMware ESXi 3.569


(ACLX) Initiator Group7;(SC3) SCSI-3 compliance

EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78


200 VMware ESX: 3.0.369, 70,3.569, Server 2.5.569, 71;

VMware ESXi 3.569

FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance96;(UWN) Unique World Wide


EMC Enginuity 5671: .31.35,.32.36, .45.52, .48.56, .54.59,.55.60, .58.64, .59.64, .60.65,.65.69, .68.71, .69.71, .74.75,.75.75, .80.77, .81.78, .82.78




Name

201 VMware ESX: 3.0.369, 70,3.569;

VMware ESXi 3.569



EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


202 VMware ESX: 3.0.369, 70,3.569;

VMware ESXi 3.569

FC-AL80;FC-SW



EMC Enginuity 5567: .53.30,.54.31, .55.32, .56.33


203 VMware ESX: 3.0.369, 70,3.569;

VMware ESXi 3.569



EMC Enginuity 5568: .61.23,.62.23, .64.24, .65.25, .66.25,.67.26, .68.27, .68.28


204 VMware ESX: 4.0 (vSphere4)69, 93, 94, 4.1 (vSphere 4)69,93, 94, 105, 117, 118, 119, 120;

VMware ESXi: 4.0 (vSphere4)69, 93, 94, 4.1 (vSphere 4)69,93, 94, 105, 117, 118, 119, 120

FC-AL80;FC-SW

(C) Common Serial Number;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance


EMC Enginuity 5772: .55.51,.59.53, .83.75, .85.77, .88.80,.91.83, .92.83, .92.84, .97.88,.100.91, .101.91, .103.93,.104.93, .105.94

EMCSymmetrixDMX-4



FC-AL80;FC-SW




EMCSymmetrixDMX-3



FC-AL80;FC-SW

(C) Common Serial Number;(SC3) SCSI-3 compliance;(SPC-2) SPC-2compliance14


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3



FC-AL80;FC-SW



EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201; EMC Enginuity5875: .135.91, .139.93,.198.148, .231.172

EMCSymmetrixVMAX



FC-AL80;FC-SW



EMC Enginuity 5773: .79.58,.123.83, .130.90, .134.94,.138.96, .141.98, .155.107,.160.111, .163.113, .167.115,.168.115, .175.122

EMCSymmetrixDMX-4

209 VMware: ESX 3.0.369, 70,ESXi 3.569





210 VMware: ESX 3.0.369, 70,ESXi 3.569



EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3

211 VMware: ESX 3.0.369, 70,ESXi 3.569





212 VMware: ESX 3.0.369, 70,ESXi 3.569

FC-SW (C) Common Serial Number;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance14;(UWN) Unique World WideName


EMC Enginuity 5771: .68.75,.81.90, .83.92, .86.95, .87.95,.91.99, .92.99, .94.102,.95.103, .99.108, .100.108,.104.114, .105.115, .111.119,.112.120, .113.121, .114.121

EMCSymmetrixDMX-3



213 VMware: ESX 3.569, ESXi3.569

FC-AL80;FC-SW


(OS2007) Host SCSICompliance 2007; (SC3)SCSI-3 compliance

EMC Enginuity 5874:.121.102, .122.103, .123.104,.157.129, .207.166, .210.168,.229.182, .230.183, .240.191,.241.191, .242.191, .248.194,.259.201

EMCSymmetrixVMAX

1. Supported kernels: 2.6.27.19-5.1, 2.6.27.21-0.1.2, 2.6.27.23-0.1, 2.6.27.25-0.1.1 2.6.27.29-0.1.1, 2.6.27.37-0.1.1, 2.6.27.39-0.3.1, 2.6.27.42-0.1.1, 2.6.27.45-0.1.1,2.6.27.48-0.1.1, 2.6.27.48-0.6.1, 2.6.27.48-0.12.1, 2.6.27.54-0.2.1. Confirm kernel support with server vendor.

2. D Bit with Cluster3. NetWare NSS has 256 LUN per port limitation. If NSS will not be used, 128 LUNs is supported.4. PowerPath is not supported in conjunction with host-based mirroring.5. Shared HBA environments between disk and tape/tape libraries are not supported for Novell.6. Maximum number of NWFS volumes that can be mounted is 64.7. Required when ports are shared among multiple initiators.8. Supported kernel: 2.6.18-128.0.0.0.2.el5, 2.6.18-128.1.1.0.1.el5, 2.6.18-128.1.6.0.1.el5, 2.6.18-128.1.10.0.1.el5, 2.6.18-128.1.14.0.1.el5, 2.6.18-128.1.16.0.1.el5,

2.6.18-128.2.1.0.1.el5, 2.6.18-128.4.1.0.1.el5, 2.6.18-128.7.1.0.1.el5. Confirm kernel support with server vendor.9. Support kernel: 2.6.9-78.8AXS2. Contact server vendor for support.10. Asianux 2.0 SP3 include Redflag DC Server 5.0 SP3, Miracle Linux v4.0 SP3, HanCom 2006 Server Asianux 2.0 SP3.11. Supported kernels: 2.6.18-128.el5, 2.6.18-128.1.1.el5, 2.6.18-128.1.6.el5, 2.6.18-128.1.10.el5, 2.6.18-128.1.14.el5, 2.6.18-128.1.16.el5, 2.6.18-128.2.1.el5, 2.6.18-128.4.1.el5,

2.6.18-128.7.1.el5, 2.6.18-128.17.1.el5, 2.6.18-128.23.1.el5, 2.6.18-128.23.2.el5, 2.6.18-128.26.1.el5. Confirm kernel support with server vendor.12. C Bit required for VERITAS VxVM DMP functionality.13. The OS2007 director bit is available for support in the 5771 microcode version beginning with the 5771.104.114 release14. The SPC-2 director bit is available for support in 5771 microcode version beginning with the 5771.87.95 release.15. AIX 5.1 has reached End of Service (EOS) April 2006. After this date, AIX 5.1 will only be supported for customers that have purchased a "Fee Based Service Extension" contract

from IBM.16. AIX 5.1 has reached End of Service (EOS) April 2006. After this date, AIX 5.1 will only be supported for customers that have purchased a "Fee Based Service Extension" contract

from BULL.17. In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. All

SLES 9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require anextended support contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August31, 2014.

18. Supported kernels: 2.6.5-7.308, 2.6.5-7.311, 2.6.5-7.312, 2.6.5-7.314, 2.6.5-7.315, 2.6.5-7.316, 2.6.5-7.317, 2.6.5-7.318, 2.6.5-7.319, 2.6.5-7.321, 2.6.5-7.322, 2.6.5-7.323,2.6.5-7.324, 2.6.5-7.325. The 32bit kernel 2.6.5-7.311 is not supported with PowerPath 5.1 SP1. Confirm kernel support with server vendor.

19. Supported kernels: 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3.Confirm kernel support with server vendor.

20. Novell OES is supported on kernels 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3, and 2.6.5-7.308 withEMC PowerPath only.

21. Novell OES is only supported with Fibre channel connectivity.22. Novell OES 2 is supported with Linux native MPIO or via RPQ for EMC PowerPath.23. Novell OES 2 SP1 is supported with this update.24. Supported kernels: 2.6.16.21-0.8, 2.6.16.21-0.15, 2.6.16.21-0.25, 2.6.16.27-0.6, 2.6.16.27-0.9.

Confirm kernel support with server vendor.PowerPath 5.0 support begins with kernel 2.6.16.27-0.6.

25. Supported kernels: 2.6.16.46-0.12, 2.6.16.46-0.14, 2.6.16.53-0.8, 2.6.16.53-0.16, 2.6.16.54-0.2.3, 2.6.16.54-0.2.5, 2.6.16.54-0.2.8. Confirm kernel support with server vendor.26. EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an

RPQ.27. PowerPath is not available or supported.28. Supported kernels: 2.6.16.60-0.21, 2.6.16.60-0.23, 2.6.16.60-0.27, 2.6.16.60-0.30, 2.6.16.60-0.31, 2.6.16.60-0.33, 2.6.16.60-0.34, 2.6.16.60-0.35, 2.6.16.60-0.37,

2.6.16.60-0.39.3, 2.6.16.60-0.42.4, 2.6.16.60-0.42.5, 2.6.16.60-0.42.7, 2.6.16.60-0.42.8, 2.6.16.60-0.42.9, 2.6.16.60-0.42.10, 2.6.16.60-0.42.11. Confirm kernel support withserver vendor.

29. Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.2.EL.Confirm kernel support with server vendor.

30. Native multipathing is not supported on boot-from-SAN configurations.31. Suported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL.

Confirm kernel support with server vendor.32. Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL.

Confirm kernel support with server vendor.33. Supported kernels: 2.6.9-55.EL, 2.6.9-55.0.2.EL., 2.6.9-55.0.6.EL, 2.6.9-55.0.9.EL, 2.6.9-55.0.12.EL, 2.6.9-55.0.14.EL. Confirm kernel support with server vendor.34. Supported kernels: 2.6.9-67.EL, 2.6.9-67.0.1.EL, 2.6.9-67.0.4.EL, 2.6.9-67.0.7.EL, 2.6.9-67.0.15.EL, 2.6.9-67.0.20.EL, 2.6.9-67.0.22.EL. Confirm kernel support with server

vendor.35. Supported kernels: 2.6.9-78.EL, 2.6.9-78.0.1.EL, 2.6.9-78.0.5.EL, 2.6.9-78.0.8.EL, 2.6.9-78.0.13.EL, 2.6.9-78.0.17.EL, 2.6.9-78.0.22.EL, 2.6.9-78.0.24, 2.6.9-78.0.31.EL,

2.6.9-78.0.32.EL, 2.6.9-78.0.33.EL. Confirm kernel support with server vendor.36. Supported kernels: 2.6.18-8.EL5, 2.6.18-8.1.1.EL5, 2.6.18-8.1.3.EL5, 2.6.18-8.1.4.EL5, 2.6.18-8.1.6.EL5, 2.6.18-8.1.8.EL5, 2.6.18-8.1.10.EL5, 2.6.18-8.1.14.EL5, and

2.6.18-8.1.15.el5. Confirm kernel support with server vendor.37. Supported kernels: 2.6.18-53.el5, 2.6.18-53.1.4.el5, 2.6.18-53.1.6.el5, 2.6.18-53.1.13.el5, 2.6.18-53.1.14.el5, 2.6.18-53.1.19.el5, 2.6.18-53.1.21.el5. Confirm kernel support with

server vendor.38. Supported kernels: 2.6.18-92.el5, 2.6.18-92.1.1.el5, 2.6.18-92.1.6.el5, 2.6.18-92.1.10.el5, 2.6.18-92.1.13.el5, 2.6.18-92.1.17.el5, 2.6.18-92.1.18.el5,2.6.18-92.1.22.el5,

2.6.18-92.1.24.el5, 2.6.18-92.1.26.el5. Confirm kernel support with server vendor.39. In accordance with the Red Hat Enterprise Linux Errata Support Policy, the regular 7 year life-cycle of Red Hat Enterprise Linux 3 will end on October 31, 2010. All RHEL 3

configurations in the ESM will be frozen as of the publication of the October 2010 ESM. At this time, Red Hat Enterprise Linux 3 will no longer be publicly supported and willrequire an extended support contract from Red Hat in order for the RHEL 3 configuration in the ESM to be supported by EMC.

40. Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL, 2.6.9-42.0.8.EL, 2.6.9-42.0.10.EL. Confirm kernel support with server vendor.41. Supported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL. Confirm kernel support with server vendor.42. Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.1.EL, 2.6.9-22.0.2.EL. Confirm kernel support with server vendor.43. Supported kernels: 2.4.21-50.EL, 2.4.21-51.EL, 2.4.21-52.EL, 2.4.21-53.EL, 2.4.21-57.EL, 2.4.21-58.EL, 2.4.21-63.EL, 2.4.21-66.EL. Confirm kernel support with server vendor.44. Supported kernels: 2.4.21-47.EL, 2.4.21-47.0.1.EL. Confirm support with server vendor.45. Supported kernels: 2.4.21-40.EL. Confirm kernel support with server vendor.46. Supported kernels: 2.6.18-8.10AX. Confirm kernel support with server vendor.47. Includes Redflag DC Server, Miracle Linux and HanCom Asianux Server.48. Supported kernel 2.6.18-53.11AXS3, 2.6.18-53.19AXS3. Confirm kernel support with server vendor.49. Asianux 2.0 SP2 include Redflag DC Server 5.0 SP2, Miracle Linux v4.0 SP2, HanCom 2006 Server Asianux Server 2.0 SP2.50. Supported kernels: 2.6.9-42.7AX.

Confirm kernel support with server vendor.51. Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, HanCom 2006 Server Asianux Server 2.0 SP1.52. Kernels supported: 2.6.9-34.21AX.

Confirm kernel support with server vendor.53. Support kernel: 2.6.9-42.7AX. Contact server vendor for support.54. Novell OES is supported with EMC PowerPath only.55. Supported kernels: 2.6.9-11.EL. Confirm kernel support with server vendor.56. Supported kernels: 2.6.9-5.EL, 2.6.9-5.0.5.EL. Confirm kernel support with server vendor.57. Supported kernels: 2.6.9-11.19AX.

Confirm kernel support with server vendor.58. Asianux 2.0 GA include Redflag DC Server 5.0 GA, Miracle Linux v4.0 GA, HanCom 2006 Server Asianux Server 2.0.59.



Supported kernels: 2.6.9-11.25AX.Confirm kernel support with server vendor.

60. Support kernels: 2.4.21-9.30AX, 2.4.21-9.38AX. Confirm kernel version with server vendor.61. Asianux 1.0 GA include Red Flag DC Server 4.1 GA, MIRACLE LINUX V3.0 GA.62. Asianux 1.0 GA include Red Flag DC Server 4.1 GA, Miracle Linux MLSE 3.0 GA.63. Support kernels: 2.4.21-20.19AX, 2.4.21-20.29AX. Confirm kernel version with server vendor.64. Support kernels: 2.4.21-37.18AX. Confirm kernel version with server vendor.65. Asianux 1.0 SP2 includes Red Flag DC Server 4.1 SP2,Miracle Linux v3.0 SP2, HanCom Linux 2005 Server Asianux Inside SP2.66. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, HanCom Linux 2005 Server Asianux Inside SP3.67. Support kernels: 2.4.21-47.22AX. Confirm kernel version with server vendor.68. Support kernel: 2.4.21-15.12AX. Contact server vendor for support.69. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to

the Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf70. For details on Microsoft Cluster Services (MSCS) support with Windows guest operating systems, refer to the Storage/SAN Compatibility Guide For ESX Server 3.x on

www.vmware.com.71. For details on Microsoft Cluster Services (MSCS) support with Windows guest operating systems, refer to the "SAN Compatibility Guide For ESX Server 2.x" at

http://www.vmware.com/pdf/esx_SAN_guide.pdf72. Enable the OS2007 flag will cause Solaris host to log the Unit Attention event when LUNs on the FA port change. This behavior is expected and not harm to any applications.73. Migration from SPC2 clear to SPC2 set for existing utilized volumes by VxVM may require special procedure.74. SC3 flag can only be optionally set if SPC2 is also set75. EMC supports ZFS in Solaris 10_x86 11/06 (update 3) or later. The Snapshot and Clone features of ZFS are supported only through Sun Microsystems.76. Oracle Solaris 8 Sparc configurations will be removed from the ESM by 3/1/2012.77. Existing Solaris 8 configurations are frozen due to Solaris 8 entering Phase II of its End of Support Life (EOSL) cycle. Customers should review the E-Lab Navigator Extended

Solutions Tab for the most recent Letter of Support which offers limited support for configurations not listed in the ESM.78. 5.1B-2=5.1B PK4.79. 5.1B-4=5.1B PK6. (T64V51BB27AS0006-20061208.tar)80. Direct connect only, no hubs.81. Supported kernels: 2.6.32-71.el6, 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6, 2.6.32-71.24.1.el6, 2.6.32-71.31.1.el6, 2.6.32-71.34.1.el6. Confirm

kernel support with server vendor.82. Supported kernels: 2.6.18-194.1.AXS3, 2.6.18-194.2.AXS3, 2.6.18-194.3.AXS3, 2.6.18-194.4.AXS3, 2.6.18-194.5.AXS3, 2.6.18-194.7.AXS3, 2.6.18-194.8.AXS3,

2.6.18-194.9.AXS3, 2.6.18-194.10.AX3. Confirm kernel support with server vendor.83. Supported kernels: 2.6.32.12-0.7, 2.6.32.13-0.4.1, 2.6.32.13-0.5.1, 2.6.32.19-0.2.1, 2.6.32.19-0.3.1, 2.6.32.23-0.3.1, 2.6.32.24-0.2, 2.6.32.27-0.2.2, 2.6.32.29-0.3.1,

2.6.32.36-0.5.2, 2.6.32.43-0.4.1, 2.6.32.45-0.3.2, 2.6.32.46-0.3.1. Confirm kernel support with server vendor.84. Supported kernels: 2.6.18-194.el5, 2.6.18-194.3.1.el5, 2.6.18-194.8.1.el5, 2.6.18-194.11.1.el5, 2.6.18-194.11.3.el5, 2.6.18-194.11.4.el5, 2.6.18-194.17.1.el5, 2.6.18-194.17.4.el5,

2.6.18-194.26.1.el5, 2.6.18-194.32.1.el5 Confirm kernel support with server vendor.85. Supported kernels: 2.6.18-194.0.0.0.3.el5, 2.6.18-194.0.0.0.4.el5, 2.6.18-194.3.1.0.1.el5, 2.6.18-194.3.1.0.2.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.8.1.0.1.el5,

2.6.18-194.11.1.0.1.el5, 2.6.18-194.11.3.0.1.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.17.1.0.1.el5, 2.6.18-194.17.1.0.2.el5, 2.6.18-194.17.4.0.1.el5, 2.6.18-194.26.1.0.1.el5,2.6.18-194.32.1.0.1.el5. Confirm kernel support with server vendor.

86. Supported kernels: 2.6.18-164.0.0.0.1.el5, 2.6.18-164.2.1.0.1.el5, 2.6.18-164.6.1.0.1.el5, 2.6.18-164.9.1.0.1.el5, 2.6.18-164.10.1.0.1.el5, 2.6.18-164.11.1.0.1.el5,2.6.18-164.15.1.0.1.el5. Confirm kernel support with server vendor.

87. Supported kernels: 2.6.16.60-0.54.5, 2.6.16.60-0.57.1, 2.6.16.60-0.58.1, 2.6.16.60-0.59.1, 2.6.16.60-0.60.1, 2.6.16.60-0.62.1, 2.6.16.60-0.66.1, 2.6.16.60-0.67.1,2.6.16.60-0.68.1, 2.6.16.60-0.69.1, 2.6.16.60-0.74.7, 2.6.16.60-0.76.8, 2.6.16.60-0.77.1, 2.6.16.60-0.79.1, 2.6.16.60-0.81.2, 2.6.16.60-0.83.2. Confirm kernel support with servervendor.

88. Novell OES 2 SP2 is supported with this update.89. Novell OES 2 SP3 is supported with this update.90. Supported kernels: 2.6.18-164.el5, 2.6.18-164.2.1.el5, 2.6.18-164.6.1.el5, 2.6.18-164.9.1.el5, 2.6.18-164.10.1.el5, 2.6.18-164.11.1.el5, 2.6.18-164.15.1.el5, 2.6.18-164.17.1.el5,

2.6.18-164.25.1.el5, 2.6.18-164.25.2.el5. Confirm kernel support with server vendor.91. Supported kernel : 2.6.9-89.0.0.0.1.EL, 2.6.9-89.0.3.0.1.EL, 2.6.9-89.0.7.0.1.EL, 2.6.9-89.0.9.0.1.EL, 2.6.9-89.0.11.0.1.EL, 2.6.9-89.0.15.0.1.EL, 2.6.9-89.0.16.0.1.EL,

2.6.9-89.0.18.0.1.EL, 2.6.9-89.0.19.0.1.EL, 2.6.9-89.0.20.0.1.EL, 2.6.9-89.0.20.0.2.EL, 2.6.9-89.0.23.0.1.EL, 2.6.9-89.0.25.0.1.EL, 2.6.9-89.0.26.0.1.EL, 2.6.9-89.0.28.0.1.EL,2.6.9-89.0.29.0.1.EL, 2.6.9-89.29.1.0.1.EL, 2.6.9-89.31.1.0.1.EL, 2.6.9-89.33.1.0.1.EL 2.6.9-89.35.1.0.1.EL. Confirm kernel support with server vendor.

92. Supported kernels: 2.6.9-89.EL, 2.6.9-89.0.3.EL, 2.6.9-89.0.7.EL, 2.6.9-89.0.9EL, 2.6.9-89.0.11.EL, 2.6.9-89.0.15.EL, 2.6.9-89.0.16.EL, 2.6.9-89.0.18.EL, 2.6.9-89.0.19.EL,2.6.9-89.0.20.EL, 2.6.9-89.0.23.EL, 2.6.9-89.0.25.EL, 2.6.9-89.0.26.EL, 2.6.9-89.0.28.EL, 2.6.9-89.0.29.EL, 2.6.9-89.29.1.EL, 2.6.9-89.31.1.EL, 2.6.9-89.33.1.EL,2.6.9-89.35.1.EL. Confirm kernel support with server vendor.

93. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please referto the Storage/SAN section of the VMware Hardware Compatibility Guide athttp://www.vmware.com/resources/compatibility/search.php.

94. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.95. FC-AL topology supported with direct attach only.96. The SPC2 director bit is available for support in the 5671 microcode version beginning with the 5671.58.64 release.97. This director bit setting is valid only for Parallel SCSI connection98. The OS2007 director bit is available for support in the 5671 microcode version beginning with the 5671.68.71 release.99. HP-UX 11iv3 (HP-UX 11.31) supported with 5671 microcode version beginning with the 5671.58.64 release.100. Recommended to enable os07 for HP-UX 11iv3 (HP-UX 11.31) initiators, refer to EMC HP-UX Host Connectivity Guide.101. HP-UX 11iv3 (HP-UX 11.31) supported with 5771 microcode version beginning with the 5771.87.95 release.102. Supported kernels: 2.6.18-274.0.0.0.1.el5. Confirm kernel support with server vendor.103. Supported kernels: 2.6.32-100.34.1.el6uek. Confirm kernel support with server vendor.104. Supported kernels: 2.6.32-200.13.1.el5uek. Confirm kernel support with server vendor.105. All released updates to ESX Server version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific

server.106. Supported kernels: 2.6.32-100.28.1.el6, 2.6.32-100.28.9.el6, 2.6.32-100.28.11.el6, 2.6.32-100.28.15.el6, 2.6.32-100.28.17.el6, 2.6.32-100.35.1.el6uek. Confirm kernel

support with server vendor.107. Supported kernels: 2.6.32-100.28.1.el5, 2.6.32-100.28.9.el5, 2.6.32-100.28.11.el5, 2.6.32-100.28.15.el5; 2.6.32-100.28.17.el5, 2.6.32-100.35.1.el5uek. Confirm kernel support

with server vendor.108. Supported kernels: 2.6.18-274.el5, 2.6.18-274.3.1el5, 2.6.18-274.7.1.el5. Confirm kernel support with server vendor.109. Supported kernels: 2.6.18-238.0.1.el5, 2.6.18-238.1.1.0.1.el5, 2.6.18-238.5.1.0.1.el5, 2.6.18-238.9.1.0.1.el5, 2.6.18-238.12.1.0.1.el5. Confirm kernel support with server vendor.110. Supported kernels: 2.6.32-131.0.15.el6, 2.6.32-131.2.1.el6, 2.6.32-131.6.1.el6, 2.6.32-131.12.1.el6, 2.6.32-131.17.1.el6. Confirm kernel support with server vendor.111. Supported kernels: 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6. Confirm kernel support with server vendor.112. Supported kernels: 2.6.16.60-0.85.1, 2.6.16.60-0.87.1, 2.6.16.60-0.89.1, 2.6.16.60-0.91.1. Confirm kernel support with server vendor.113. SLES Xen kernel supported. Refer to the Virtualiztion Hosting Server (Parent) Solutions table for supported configurations.114. EMC supports the following filesystems: ext2, ext3, ext4, xfs, and gfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please

submit an RPQ.115. Supported kernels: 2.6.18-238.el5, 2.6.18-238.1.1.el5, 2.6.18-238.5.1.el5, 2.6.18-238.9.1.el5, 2.6.18-238.12.1.el5, 2.6.18-238.19.1.el5, 2.6.18-238.21.1.el5, 2.6.18-238.28.1.el5.

Confirm kernel support with server vendor.116. Supported kernels: 2.6.9-100.EL; 2.6.9-101.EL. Confirm kernel support with server vendor.117. Supported with vMotion.118. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer to

http://vmware.com/support/policies/oracle-support.html119. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes)

configurations. VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.The following SCSI Controllers are supported with VMWare and MSCS:Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.

120. Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer tohttp://www.vmware.com/solutions/partners/alliances/oracle.html.

121. Starting with 5874.249.195.7 (defined in opt 351117) configurations that require AS400 or IBM i device (2107-Axx) mapping to a Symmetrix host adapter can be mixed on the portor on the processor with open systems Gatekeeper devices. The preferred configuration method is to use the port flag ACLX with required device masking.

122. Prior to 5874.249.195.7, an RPQ is required for open systems Gatekeeper devices to be mixed on the same processor with AS400/IBM i devices.



http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software

http://www.vmware.com/pdf/GuestOS_guide.pdf

http://www.vmware.com/pdf/esx_SAN_guide.pdf

http://www.vmware.com/resources/compatibility/search.php

http://vmware.com/support/policies/oracle-support.html

http://www.vmware.com/solutions/partners/alliances/oracle.html

123. Requires IBM PTF MF42315.124. For IBM Performance Tools for IBM i, PTFs SI38651 & SI38842 are required.125. Requires IBM PTFs MF47831 and MF47866.126. Supported kernel : 2.6.9-100.0.0.0.1.EL. Confirm kernel support with server vendor.127. 5.1B-5=5.1B PK7. (T64V51BB28AS0007-20090312.tar)128. 5.1B-6=5.1B PK8. (T64V51BB29AS0008-20100821.tar)

Return To Top

December 2011 ESM



Date post:	21-Apr-2015
Category:	Documents
Upload:	vaibhav-lal
View:	105 times
Download:	0 times

2003 Cluster Server

Documents