**2005 PRICE A4 singles AG - Solid State Security · This price list applies to all orders placed...

Specialist

Electrical

Installation

Company

Specialist

Electrical

Installation

Company

TRADE PRICE LISTTRADE PRICE LISTTRADE PRICE LISTTRADE PRICE LISTJULY 2007JULY 2007JULY 2007

JULY 2008JULY 2008JULY 2008

This price list applies to all orders placed for delivery on or after 1st July 2008 and supercedes all previous

Solid State price lists.

Prices shown are our current UK trade prices in pounds (£) Sterling. Trade discounts may apply - contact

our Sales Desk for details.

Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than

£300.00 nett goods will be charged at £8.50 (UK mainland only). Carriage charges for other areas are

available on request.

An on-site delivery service is available at no extra cost. However, the nature of on-site deliveries (lack of

access, etc.), means that goods often have to be signed for by someone other than your selected

representative. Once a signature has been obtained, neither ourselves or our carrier can be held

responsible for the goods. Although we will endeavour to provide proof of delivery wherever possible,

no compensation can be claimed for any consequential loss.

An inspection and restocking charge of 15% will be made on returns (minimum £5.00 per consignment).

Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.

All goods supplied and services provided are subject to our standard Conditions of Sale, as detailed on

our Account Application Form, copies of which are available on request. Copies of our Customer Returns

Policy are also available on request.

Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but

no responsibility can be accepted by Solid State for any mistakes.

Prices are subject to change without prior notice.

Our Sales Desk is open 9.00am to 5.00pm Monday to Friday, except for bank holidays, and over our

Christmas shutdown period.

Orders can be placed by telephone, fax or email using the details shown below:-

solidstatesecurity.co.uk01257 463018 01257 462038 [email protected]

Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7ASpage 2

www.solidstatesecurity.co.uk

[email protected]

www.solidstatesecurity.co.uk

01257 463018 01257 462038

Visit our website at


Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS page 3

CONTENTSCONVENTIONAL FIRE ALARM EQUIPMENTCFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .................................................................................... 4CFP Standard 2-8 Zone Conventional Fire Panels (to EN54-2/4)...................................................................................... 4CFP LPCB Approved 2-8 Zone Conventional Fire Panels (to EN54-2/4) .......................................................................... 4EFP Single Zone Conventional Fire Panels (to BS5839-4) ................................................................................................ 5FP 2-14 Zone Conventional Fire Panels (to BS5839-4) ...................................................................................................... 5MFP 4-28 Zone Conventional Fire Panels (to BS5839-4) .................................................................................................. 5EP Range 3 Zone Automatic Extinguisher Panel (to EN12094-1) .................................................................................... 6FP Automatic Extinguisher Panels .................................................................................................................................... 6Fire Alarm Ancillaries (remote indicators, relays, device isolators and sounder circuit extenders) .............................. 7EN54-4 Power Supplies ........................................................................................................................................................7Manual Call Points .............................................................................................................................................................. 8Series 65 (Apollo) Conventional Smoke & Heat Detectors .............................................................................................. 8Orbis (Apollo) Conventional Smoke & Heat Detectors .................................................................................................... 8Series ECO1000 (System Sensor) Conventional Smoke & Heat Detectors ........................................................................8Series H (Hochiki) Conventional Smoke & Heat Detectors .............................................................................................. 9Beam Detectors .................................................................................................................................................................. 9Bells...................................................................................................................................................................................... 9 Sirens.................................................................................................................................................................................... 9Bedhead Sounders .............................................................................................................................................................. 9 Base Sounders ......................................................................................................................................................................9Strobes / Beacons .............................................................................................................................................................. 10Sounder Strobe Combinations ........................................................................................................................................ 10Electromagnetic Door Retainers ...................................................................................................................................... 10Vibrating Pads .................................................................................................................................................................. 1024V VRLA Battery Packs .................................................................................................................................................. 10

2-WIRE FIRE ALARM EQUIPMENTCFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries................................................................ 11

ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENTXFP 1-2 Loop Networkable Analogue Addressable Fire Panels (to EN54-2/4) ............................................................ 12BS5839-6 Hush Buttons......................................................................................................................................................12AFP 1-2 Loop Analogue Addressable Fire Panels (to EN54-2/4) .................................................................................... 13XP95 Analogue Addressable Peripherals ....................................................................................................................13/14Discovery Analogue Addressable Peripherals ................................................................................................................14C-TEC manufactured Analogue Addressable Peripherals ..............................................................................................15Hochiki ESP Analogue Addressable Peripherals ............................................................................................................ 15Nittan Analogue Addressable Peripherals .................................................................................................................... 16System Sensor Analogue Addressable Peripherals ........................................................................................................ 16

VOICE ALARM SYSTEMSAVAC Voice Alarm System................................................................................................................................................ 17PA/VA Systems .................................................................................................................................................................. 17

DISABLED REFUGE / EMERGENCY VOICE COMMUNICATION EQUIPMENTSigTEL Emergency Voice Communication System (to BS5839-9) .................................................................................. 18

DISABLED PERSONS TOILET ALARMSNC951 Disabled Persons Toilet Alarm Kits ...................................................................................................................... 19

800 SERIES CONVENTIONAL CALL SYSTEM800 Series Conventional Call System ................................................................................................................19/20/21/22800 Series Stainless Steel Call System .............................................................................................................................. 22C-Call Waiting Room Call System .................................................................................................................................... 22

ADDRESSABLE CALL SYSTEMS / INFRARED STAFF PROTECTION SYSTEMSQuantec Addressable Call System ........................................................................................................................ 23/24/25

INDUCTION LOOP EQUIPMENTPDA Range Induction Loop Equipment and Ancillaries............................................................................................ 26/27

INFRARED ASSISTIVE LISTENING SYSTEMSInfrared Assistive Listening Systems ................................................................................................................................28

POWER SUPPLIES12 & 24V Power Supply Units............................................................................................................................................29

TRAINING SESSIONS & CPD SEMINARSProduct-based training sessions and CPD certified seminars ........................................................................................29

CONVENTIONAL FIRE ALARM EQUIPMENT


page 4

• Fully compliant with EN54-2/4

• Standard, Economy and LPCB approved versions available

• Attractive flush or surface mountable plastic lid and enclosure

• Four conventional sounder circuits

• Class change and alert inputs

• Auxiliary fault, reset, remote and aux. fire outputs

• Wide range of engineering functions including zone test, non-latching zones, programmable delays and coincidence (dependent on model purchased)

• Access code and keyswitch variants

• Ancillary connections for up to eight two-wire repeaters per system and optional CFP relay boards

• See page 11 for information on our AlarmSense two-wire CFP panels.

CFP702-4 CFP Standard 2 zone panel, code entry version (C-TEC branded) £118.45

CFP702-4U CFP Standard 2 zone panel, code entry version (unbranded) £118.45

CFP702-4K CFP Standard 2 zone panel, keyswitch version (C-TEC branded) £139.05

CFP702-4KU CFP Standard 2 zone panel, keyswitch version (unbranded) £139.05









CFP760 CFP 8 zone repeater panel, code entry version (C-TEC branded), max 8 per system £172.24

CFP760U CFP 8 zone repeater panel, code entry version (unbranded), max 8 per system £172.24

CFP760K CFP 8 zone repeater panel, keyswitch version (C-TEC branded), max 8 per system £180.88

CFP760KU CFP 8 zone repeater panel, keyswitch version (unbranded), max 8 per system £180.88

CFP761 CFP/XFP network driver card, one required per repeater system, fit at main £60.34

CFP762 CFP relay output card, provides reset, fault, aux & remote relay outputs £40.99

CFP763 CFP relay output card, 12 relays, as CFP762 plus 8 o/p per zone relays £63.19

CFP764 CFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone CFP) £42.12

CFP765 CFP relay output card, 4 relays (4 o/p per zone relays for a 4 zone CFP) £37.12

CFP766 CFP relay output card, 2 relays (2 o/p per zone relays for a 2 zone CFP) £32.12BF362 Barrier interface unit (allows a CFP zone circuit to be connected to up to 10 £15.38

intrinsically safe detectors and call points via a Zenner barrier, not supplied)

CFP STANDARD 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all CFP standard features except coincidence, zone delay and non-latching zone facilities.CFP Economy panels are not compatible with CFP repeaters or CFP relay boards.

CFP702E-4 CFP Economy 2 zone panel, code entry version (unbranded) £105.00

CFP702E-4K CFP Economy 2 zone panel, keyswitch version (unbranded) £110.00





CFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

CFP LPCB APPROVED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all CFP standard features except coincidence and non-latching zone facilities.

CFP702-4/LPC CFP LPCB approved 2 zone panel, code entry £154.06LPCB approved to EN54-2/4



CFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)

Include all standard CFP features. Zone circuits designed for use with AlarmSense call points, AlarmSensedetectors & AlarmSense sounders only. See our separate listing on page 11

CFP 2-8 ZONE EN54 FIRE PANELS

CFP STANDARD PANELS

CFP ECONOMY PANELS

CFP LPCB APPROVED PANELS

Zone delay facilit

y

Non-latc

hing

Coincid

ence

Zone test fa

cility

Faultdiagnostic

Ancillary

connections

for syste

mexpansio

n

4

7

4 4 4 4 4

7 7 7

7 7

4 4

4 4 4 4

zones fa

cility

(double-k

nock) facilit

y

facilit

ies

Which CFP?

This chart illustrates the different engineering functions available on the CFP range of fire panels

LPCB Ref. 176ato BS EN 54 pts 2 & 4

NEW

NEW

NEW




• Fully compliant with BS5839-4

• Lift-off lid for easy first fix and straightforward maintenance

• Robust metal enclosure with heavy duty base connections

• Optional head removal facility (fitted as standard to MFP panels)

• Non-latching “class change” input

• Latching fire and non-latching fault outputs (via expansion loom)

• Short circuit = fire facility (selectable on a zone by zone basis for retro-installations)

• Ancillary connections for repeater panels and other system add-ons including expansion looms, fault relays, sounder extender kits, etc

• Ideal for retro-installations

FF382-2 FP 2 zone panel, does not extend £130.93

FF384-2 FP 4 zone panel, extendable to 6 zones £200.43






FF387Z-2 FP 2 zone extender pcb kit, use to extend FP panels £34.54

BF378M MINIMU miniature EOL module (for head out monitoring on EFP/FP) £8.44

BF378 Electronic Monitoring Unit (for head out monitoring on EFP/FP) £16.55

FF374FR FP fault relay module £33.07

FF374DFR FP fire relay module £33.07

FF374DT FP sounder delay module £33.07

FF374X FPX expansion loom and terminals for use with FP 2-14 zone panels £10.99BF362 Barrier interface unit (allows an FP zone circuit to be connected to up to 10 £15.38


FF396-2 FP 10 zone repeater panel £125.06

FF398-2 FP 20 zone repeater panel £187.62

FF379 Bezel for FP2 £25.11

FF385 Bezel for FP4 / FP6 / FP Repeaters £27.61

FF387 Bezel for FP8 / FP10 / FP12 / FP14 £33.12

FP 2-14 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)

FF504 MFP 4 zone microprocessor panel, extendable to 12 zones £231.18


FF512 MFP 12 zone microprocessor panel, does not extend £435.84




FF528 MFP 28 zone microprocessor panel, does not extend £940.47

FF501Z MFP 4 zone extender pcb kit, use to extend MFP panels £102.32

FF574X MFPX expansion loom and terminals £10.99

FF596 MFP 8 zone repeater panel, extendable to 28 zones £185.19

FF596R MFP 8 zone repeater extender kit, use to extend MFP repeaters £41.55

FF596T Repeater transmitter pcb kit, one required per repeater system £166.46BF362 Barrier interface unit (allows an MFP zone circuit to be connected to up to 10 £15.38


FF385 Bezel for MFP4 / MFP8 / MFP12 / MFP Repeaters £27.61

FF387 Bezel for MFP16 / MFP20 / MFP24 / MFP28 £33.12

MFP 4-28 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)

FP/MFP 1-28 ZONE BS FIRE PANELS

EFP panels are not compatible with FP repeaters or FP relay modules.

FF380-2 EFP1 single zone panel, does not extend £85.43

FF380X EFPX expansion loom and terminals for EFP1 £2.71

BF378M MINIMU miniature EOL module (for head out monitoring on EFP1) £8.44

BF378 Electronic Monitoring Unit (for head out monitoring on EFP1) £16.55

EFP SINGLE ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)




EP203 3 zone EP automatic extinguisher panel (to EN12094-1) £430.00c/w 3A EN54-4 PSU & 128 x 64 pixel graphical LCD displaySee schematic below for an overview of the EP203’s inputs & outputs

EP212 Output expansion relay board for EP203 £95.00Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort

EP210F Remote status unit , flush mounting, fully-functional £135.00c/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210F or EP210S per EP203

EP210S Remote status unit, surface mounting, fully-functional £140.00c/w Status LCD, manual release & mode (auto/manual) switches Max. 8 x EP210S or EP210F per EP203

BF359/1 Weatherproof enclosure, IP66, steel, non-locking (for EP210F/S) £110.00

EP211 Economy status unit, single gang £83.00c/w keyswitch operated mode (auto/manual) switch and Status LEDsMax. 8 per EP203

EP214 System line terminator, max. 2 per system (note, one is supplied with the EP203) £27.12For terminating the EP203’s extinguishant release output to a gas release solenoid

EP215 Extinguishant hold/abort button, single gang, IP66 rated £65.00Can be used to delay or cancel the release sequence depending on how it is connected

BF372 Yellow extinguishant release call point, surface mounting £17.37

BC286/2 24V 7.0 A Hr VRLA battery pack (2 x 12V including link wire) £40.30

EP RANGE AUTOMATIC EXTINGUISHER PANEL (TO EN12094-1)

EP 3 ZONE EN 12094-1 AUTOMATIC EXTINGUISHER PANELS

An overview of the EP203’s Inputs & Outputs

FF383H-2 FP auto extinguisher panel (contact our Sales Desk for a list of features) £358.97

FF384H FP auto extinguisher panel c/w FF372/E Multi-purpose Environmental Board £418.25

FF372/E Multi-Purpose Environmental Board ONLY £62.16

FF372/W Water sensing board ONLY (for use with FF372/E) £33.35

FF372/M Mains current sensing board ONLY (for use with FF372/E) £56.50

FP AUTOMATIC EXTINGUISHER PANELS

FP AUTOMATIC EXTINGUISHER PANELS• Now with optional environmental

sensing capabilities (requires one or more add-on boards - see right fordetails)

• A three-zone automatic extinguisher panel for areas housing expensive, dangerous or irreplaceable items of equipment

• Fully compliant with EN12094 part 1

• Functions as a standard three zone fire panel with extra circuitry for controlling the release of fire-suppressing gas into computer rooms, chemical plants, etc.

• 128 x 64 pixel graphical display facilitates straightforward system programming

• Any combination of activated zones can be programmed to automatically start the panel’s release sequence

• Includes a front-panel mounted release button and two keyswitches for accessing the panel’s functions and toggling between automatic/ manual mode

• Three conventional sounder circuits, (two x 1st stage, one x 2nd stage)

• Wide range of monitored inputs and auxiliary outputs (see schematic)

• Abort and hold options allow the release sequence to be cancelled or suspended at any time

• Time-stamped event log

• Connections for up to eight remote status units with their own LCDs, manual release and mode switches

• Connections for up to eight economy status units also provided

• Optional relay expansion boards and single gang abort and hold buttons available

NEW

EXTINGUISHER RELEASEPULL DOWN and PUSH BUTTONS

Extinguisher Control Panel Instructions

Exti

ng

uis

han

tG

as




Remote Status Units(Max. 8)

Economy Status Units(Max. 8)

Input Switches

RelayBoard

DetectionZones

SounderCircuits

Fire

Local Fire

1st stage active

2nd stage active

Fault

1st

stag

e

1st

stag

e

2nd

stag

e

1 2 3

Mo

de/

ESU

Ho

ld

Ab

ort

Rel

ease

RS4

85

Gas low pressure switch

Gas flow detection switch

Activate extinguisher solenoid

Extract fan switch

Relay Outputs

Provides reset, mode, discharged, hold and abort outputs



FIRE ALARM ANCILLARIES

BF318 Remote LED indicator, supplied on a single gang plate £5.68Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit

BF376 24V 5A relay on a plate, supplied on a single gang plate £17.18Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices

BF367 Auxiliary device isolator, supplied on a single gang plate £23.74Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventingautodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance

BF366 24V 5A isolatable relay on a plate, supplied on a single gang plate £35.00Combines the functions of the BF376 5A relay and BF367 device isolator in one unit

FF502P Four zone monitored sounder extender, supplied on a double gang plate £41.55Provides four extra sounder circuits with open and closed circuit fault monitoring, two trigger inputs and one fault output

BF365SC Sounder isolator controller, supplied on a double gang plate £105.00Can be interfaced to a conventional fire alarm sounder circuit - call our Sales Desk for details

BF365IM Sounder isolator module (Max. 35 per BF365SC) £20.34

REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS, SOUNDER EXTENDERS, ETC.

BF375P 24V 250mA unregulated door release PSU, supplied on a double gang plate £41.33BF375PK 24V 250mA unregulated door release PSU kit £82.00

Includes one BF375P and one BF345/1H electromagnetic door retainer

BF375M 24V 1A regulated general purpose boxed PSU £77.96

BF377 24V 2A unregulated door release boxed PSU £66.21

BF368EN 24 3A regulated boxed PSU to EN54-4 £175.00

BF375PE 24V 250mA unregulated double gang door release psu c/w detector circuit £46.35BF375PEK 24V 250mA double gang automatic door release system £186.15

Includes 1 x BF375PE double gang door release psu c/w detector circuit, 2 x Apollo optical detectors /bases; 1 x door retainer; 1 x NCP-10 flush back box

NON-EN54 24V POWER SUPPLIES & ANCILLARIES

• A range of durable and cost-effective fire alarm ancillaries, suitable for use with virtually all makes of fire alarm panel. The range includes:-

• The BF318 remote LED indicator

• The BF376 24V 5A relay on a plate

• The BF367 auxiliary device isolator

• The BF366 isolatable 24V 5A relay on a plate

• The FF502P four zone sounder extender

• A new range of ancillary fire alarm equipment boxes for housing batteries, timers, control switches, etc

BF360BOX Ancillary fire alarm equipment box (external size 380x235x90mm) £41.59



BF360LEDKIT 6-way Status LED kit for BF360BOX £15.25

BF361LEDKIT 6-way Status LED kit for BF361BOX or BF362BOX £15.25

NCP-8 White 35mm flush mount UK single gang back box £1.72

NCP-9 White 25mm surface mount UK single gang back box £1.40

GENERAL PURPOSE BOXES

• A range of cost-effective EN54-4 compliant regulated switch-mode PSUs

• Optional STU mounting plate (for auto-dial applications) available for 12V 2A version

• All EN54 (2006) models offer low current consumption, a single pole volt-free fault relay and link-selectable battery charging capacity (1 to 3.5Ahr or 3.5-12Ahr)

• EN54 power supplies with a higher battery charging capacity (up to 80% of the total PSU output) available to special order - contact our Sales Desk for details

• Non-EN54 compliant PSUs also available (see right for details)

BF360-12 12V 2A EN54-4 Boxed PSU (supplied in a plastic enclosure) £138.08

BF360SP Optional STU mounting plate for BF360-12 2A PSU £14.28

BF360-12/C 12V 2A EN54-4 Power Supply Chassis ONLY £65.00

BF360-24 24V 1.5A EN54-4 Boxed PSU (supplied in a plastic enclosure) £150.00

BF360-24/C 24V 1.5A EN54-4 Power Supply Chassis ONLY £81.00

BF361-3 24V 3A EN54-4 Boxed PSU (small version - metal back box/plastic lid) £160.00

BF362-3 24V 3A EN54-4 Boxed PSU (large version - metal back box/metal lid) £180.00

BF361-3/C 24V 3A EN54-4 Power Supply Chassis Only £95.40




EN54-4 12V & 24V POWER SUPPLIES & ANCILLARIES (TO EN54-4:1997/A2:2006)

EN54-4 POWER SUPPLIES

NEW

NEW

NEW

Designed to work with widely available, open protocol analogue firealarm systems, this latest innovation gives fire alarm installers a uniqueopportunity to enter the rapidly expanding HMO marketplace byutilising both conventional and analogue addressable fire alarmtechnology - see page 12 for further details.

HEARD ABOUT OUR NEW BS5839-6 HUSH BUTTONSOLUTION FOR HOUSES OF MULTIPLE OCCUPATION?

page 7




BF302Z1H 55000-122 Series 65 AIR (57oC) heat detector, no base £13.50BF302Z2H 55000-127 Series 65 BR (75oC) heat detector, no base £13.50BF303Z1H 55000-132 Series 65 CR (90oC) heat detector, no base £13.50BF303Z2H 55000-137 Series 65 CS (90oC) heat detector, no base £13.50BF316ZH 55000-317 Series 65 optical smoke detector, no base £28.00BF317ZH 55000-217 Series 65 ionisation smoke detector, no base £28.00BF317ZH1 55000-220 Series 65 integrating ionisation smoke detector, no base £30.00

BF314ZOH ORB-OH-13001 Orbis multi-sensor, requires BF308ZO base £37.00BF308Z 45681-200 Series 65 base £5.47BF308ZD 45681-201 Series 65 base with diode £6.42BF308ZR 45681-245 Series 65 base with relay £17.10

BF308ZO ORB-MB-00001 Orbis timesaver base £5.50

SERIES 65 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS

BF370R ‘KAC’ surface mounting crack glass fire call point, 470Ω £6.46BF370RF ‘KAC’ flush mounting crack glass fire call point, 470Ω £6.01BF370/R ‘KAC’ IP55 Rainproof crack glass fire call point £37.77BF370/W ‘KAC’ IP67 Waterproof crack glass fire call point £74.97BF371 Spare glass for ‘KAC’ crack glass fire call points £0.54BF370KRK Test key for ‘KAC’ crack glass fire call points £0.55BF370FR ‘FUL’ surface mounting crack glass fire call point, 470Ω £6.56BF370FFR ‘FUL’ flush mounting crack glass fire call point, 470Ω £6.01BF371F/CX Spare glass for ‘FUL’ crack glass fire call point £0.42BF370FRK/CX Test key for ‘FUL’ fire call points, pack of 10 £5.55BF370FC Protective cover for ‘FUL’ fire call point £3.05BF370MR ‘KAC’ No Break surface mounting fire call point, 470Ω £8.21BF370MFR ‘KAC’ No Break flush mounting fire call point, 470Ω £7.50BF370KRK Test key for ‘KAC’ No Break fire call points £0.55BF370MC Protective cover for ‘KAC’ No Break fire call point £3.01BF372 Yellow extinguishant release surface call point £17.37

MANUAL CALL POINTS

FIRE ALARM ACCESSORIES

BF303WEH ECO1005 thermal detector, no base £15.50

BF316WEH ECO1003 optical smoke detector, no base £16.90

BF319WE ECO1002 photo-thermal detector, no base £24.23

BF308WE ECO1000B standard detector base ONLY £4.73

BF308WED ECO1000BSD detector base c/w diode ONLY £5.86

BF308WERB ECO1000BREL 12/24V relay base £12.26

BF309RTU ECO1000RTU remote test unit £26.46

SERIES ECO1000 (SYSTEM SENSOR) CONVENTIONAL SMOKE & HEAT DETECTORS

BF302ZO1H ORB-HT-11001 Orbis A1R heat detector, no base £15.50

BF302ZO2H ORB-HT-11002 Orbis A2S heat detector, no base £15.50

BF303ZO1H ORB-HT-11003 Orbis BR heat detector, no base £15.50

BF303ZO2H ORB-HT-11004 Orbis BS heat detector, no base £15.50

BF303ZO3H ORB-HT-11005 Orbis CR heat detector, no base £15.50

BF303ZO4H ORB-HT-11006 Orbis CS heat detector, no base £15.50

BF314ZOH ORB-OH-13001 Orbis multi-sensor, no base £37.00

BF316ZOH ORB-OP-12001 Orbis optical smoke detector, no base £34.00

BF308ZO ORB-MB-00001 Orbis timesaver base £5.50

BF308ZOD ORB-DB-00003 Orbis timesaver base with diode £6.50

BF308ZOR ORB-RB-10004 Orbis timesaver relay base £17.50

Orbis Intrinsically safe range

BF302Z1HIS ORB-HT-51145 Orbis grade 1 intrinsically safe heat detector, needs BF308ZIS base £60.00

BF302Z2HIS ORB-HT-51147 Orbis grade 2 intrinsically safe heat detector, needs BF308ZIS base £60.00

BF315ZHIS ORB-OH-53028 Orbis intrinsically safe multi-sensor, needs BF308ZIS base £78.87

BF316ZHIS ORB-OP-52027 Orbis intrinsically safe optical smoke detector, needs BF308ZIS base £63.15

BF308ZIS ORB-MB-50018 Orbis intrinsically safe timesaver base £10.00

ORBIS (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW




BF336 24V polarised fire bell, internal £13.72

BF336C 24V polarised 6” fire bell £13.00

BF336/W 24V polarised fire bell, weatherproof £25.32

BELLS

BF330CSR 24V red Vantage fire siren c/w shallow base £17.40

BF330CSR/LPCB 24V red Vantage fire siren c/w shallow base (LPCB approved) £18.57

BF330CDR 24V red Vantage fire siren c/w deep base £17.40

BF330CDR/LPCB 24V red Vantage fire siren c/w deep base (LPCB approved) £18.85

BF330SR 24V red polarised fire siren, internal (shallow) £17.91

BF330DR 24V red polarised fire siren, weatherproof (deep) £19.46

SIRENS

BF331CR 24V red Vara conventional bedhead sounder £13.50

BF331CR/L 24V red Vara conventional bedhead sounder, with LED £37.50

BF331CW 24V white Vara conventional bedhead sounder £13.50

BF331CW/L 24V white Vara conventional bedhead sounder, with LED £37.50

BF331R 24V red polarised bedhead sounder £13.61

BF331W 24V white polarised bedhead sounder £13.61

BEDHEAD SOUNDERS

BF332C 24V white Vector conventional base sounder £17.40

BF332C/LIDW White lid for Vector sounder £2.14

BF332 24V Squashni base ceiling sounder £17.91

BASE SOUNDERS

BF369BD Fireray 2000 12-24V optical beam detector, 10-100m range £441.54

BF369HKIT1 SPB-ET Hochiki beam detector, installation kit and filter set £515.00

BF369HR SRA-ET Hochiki reflective beam detector c/w reflector, needs BF369HRB £321.00

BF369HRB SRA-ET (B/BOX) Hochiki back box for BF369HR £46.50

BEAM DETECTORS

BF302HH1 DFJ-AE/3 Hochiki 60º fixed temperature heat detector, no base £21.00BF302HH2 DFJ-CE/3 Hochiki 90º fixed temperature heat detector, no base £21.00BF303HH1 DCD-AE/3 Hochiki 60º combined heat & rate of rise detector, no base £21.00BF303HH2 DCD-CE/3 Hochiki 90º combined heat & rate of rise detector, no base £21.00BF316HH SLR-E3 S Hochiki optical smoke detector, no base £28.00BF308H YBN-R/6 Hochiki standard detector base £4.00BF308HD YBN-R/6SK Hochiki detector base with diode £5.66BF308HR YBO-R/6R Hochiki detector base with latching relay £17.50BF380HRS YBO-R/6RS Hochiki detector base with latching relay & schottky diode £19.16BF308HRNL YBO-R/6RN Hochiki detector base with non-latching relay £31.81AFP757 Removal tool £97.75

Hochiki Intrinsically safe rangeBF302HHIS DCD-IE(IS) intrinsically safe heat detector, needs BF308HHIS base £82.71BF316HHIS SLR-E(IS) intrinsically safe optical smoke detector, needs BF308HHIS base £84.38BF308HHIS YBN-R/4(IS) intrinsically safe base £6.00BF370HIS CCP(IS) intrinsically safe manual call point £154.50MTL5061 DC/DC galvanic isolator £330.00MTL7787 Zener barrier £142.71DX070 Enclosure for galvanic isolator/zenner barrier £162.15

SERIES H (HOCHIKI) CONVENTIONAL SMOKE & HEAT DETECTORS

NEW

NEW

NEW

NEW

NEW

NEW

NEW




BC283/2 24V 1.2 AHr VRLA battery pack (2 x 12V including link wire) £25.72





BC288/4 24V 10.0 AHr VRLA battery pack (4 x 6V including link wires) £59.61


24V BATTERY PACKS

BF363 24V vibrating pad c/w locking jack plug (requires 1 x BF364) £45.00Designed for use under pillows, etc, to warn the hard of hearing of a fire condition

BF364 Single gang locking jack socket for use with BF363 £32.00Can be connected to a standard 24V (max. 27V) fire alarm sounder circuit

VIBRATING PADS

BF333CSR 24V red Vantage-Combi fire siren/beacon c/w shallow base £41.34

BF333CDR 24V red Vantage-Combi fire siren/beacon c/w deep base £41.34

BF333F 24V Flashni sounder/beacon combined £41.33

SOUNDER BEACON COMBINATIONS

BF345/1H ‘H’ Range 24V electromagnetic door retainer £31.00

BF345/2H ‘H’ Range 240V a.c. electromagnetic door retainer £32.35

BF345HB Floor mounting bracket for ‘H’ range door retainers £11.85

BF345C/24/200 ‘C’ Range 24V low profile door retainer, 200N, c/w keeper plate £30.42

BF345C/230/200 ‘C’ Range 230V a.c. low profile door retainer, 200N, c/w keeper plate £31.00

BF345C/24/500 ‘C’ Range 24V low profile door retainer, 500N, c/w keeper plate £84.14

BF345CB Floor mounting bracket for ’C’ range door retainers £7.14

BF345C/FM24/200 24V floor mounting door retainer, 200N, c/w keeper plate £63.22

BF345C/FM24/500 24V floor mounting door retainer, 500N, c/w keeper plate £89.08

ELECTRO-MAGNETIC DOOR RETAINERS

BF340/1 24V polarised red 1W fire strobe £21.75

BF340/3 24V polarised red 3W fire strobe £21.75

BF340C/1 24V 1W xenon beacon, red lens £20.85



BF340CLS 24V red LED beacon, shallow base £19.57

BF340CLD 24V red LED beacon, deep base £19.85

STROBES / BEACONS




CFP/ALARMSENSE TWO-WIRE FIRE PANELS & ANCILLARIESCFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)

Include all standard CFP features (see page 4). Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.

CFP702-2 CFP AlarmSense 2 zone two-wire panel, code entry only £153.98includes 2 AlarmSense zone circuits, does not extend



CFP760 CFP 8 zone repeater panel, up to 8 per system, code entry £172.24

CFP761 CFP network driver card, one required per repeater system, fit at main £60.34

CFP762 CFP relay output card, provides reset, fault, aux & remote relay outputs £40.99

CFP763 CFP relay output per zone card, as CFP762 plus 8 output per zone relays £63.19

CFP764 CFP relay output card, 8 relays (8 o/p per zone relays for an 8 zone CFP) £42.12



BF302ASH 55000-190 AlarmSense standard heat detector £20.86

BF302ASHH 55000-193 AlarmSense high temperature heat detector £22.41

BF316ASH 55000-390 AlarmSense optical smoke detector £32.51

BF316ASHI 55000-391 AlarmSense integrating optical smoke detector £31.38

BF308AS 45681-244 AlarmSense base with removAlert £15.68

BF330ASBS 45681-510 AlarmSense base sounder (requires cap for stand-alone use) £35.81

BF330ASLIDR 45681-295 Red cap for base sounder £3.35

BF330ASLIDW 45681-294 White cap for base sounder £3.35

BF330ASBSB 45681-509 AlarmSense base sounder/beacon £39.07

BF318AS 53832-070 AlarmSense remote indicator £10.61

BF310ASR 55000-835 AlarmSense relay module (needs mounting box) £24.75

BF370ASS 55000-894 AlarmSense surface mounting manual call point £32.68

BF316ASHC 55000-392 AlarmSense optical smoke detector and £65.51sounder base combination

BF316ASHIC 55000-393 AlarmSense integrating optical smoke detector £66.20and sounder base combination

BF302ASHC 55000-196 AlarmSense standard heat detector and £62.41sounder base combination

BF302ASHHC 55000-197 AlarmSense high temperature heat detector and £63.79sounder base combination

BF316ASHC1 55000-394 AlarmSense optical smoke detector and £81.88sounder beacon base combination

BF316ASHIC1 55000-395 AlarmSense integrating optical smoke detector and £82.75sounder beacon base combination

BF302ASHC1 55000-198 AlarmSense standard heat detector and £78.01sounder beacon base combination

BF302ASHHC1 55000-199 AlarmSense high temperature heat detector £79.73and sounder beacon base combination

ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with CFP two-wire fire panels only

NEW

NEW

NEW

NEW

NEW

NEW

NEW

Designed to work with widely available, open protocol analogue firealarm systems, this latest innovation gives fire alarm installers a uniqueopportunity to enter the rapidly expanding HMO marketplace byutilising both conventional and analogue addressable fire alarmtechnology - see page 12 for further details.

HEARD ABOUT OUR NEW BS5839-6 HUSH BUTTONSOLUTION FOR HOUSES OF MULTIPLE OCCUPATION?

• Designed to comply with EN54-2/4

• Available with 2, 4 or 8 AlarmSense zone circuits

• AlarmSense detectors, call points, sounders and beacons can be connected to the same pair of supply wires, providing considerable cost savings on installation

• Four conventional sounder circuits also provided

• Class change and alert inputs

• Auxiliary fault, reset, remote and aux. fire outputs

• Wide range of engineering functions including zone test, non-latching zones, programmable delays and coincidence

• Ancillary connections for up to eight two-wire repeaters per system and optional CFP relay boards

• General and local alarm facility on AlarmSense sounders and beacons ideal for use in houses of multiple occupation

ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT


page 12

XFP501E/X XFP Networkable single loop 16 zone panel (LPCB approved to EN54-2/4) £360.00XP95/Discovery version, code entry, c/w 1.4A psu, plastic lid, plastic back box

XFP501EK/X XFP Networkable single loop 16 zone panel (LPCB approved to EN54-2/4) £370.00XP95/Discovery version, keyswitch entry, c/w 1.4A psu, plastic lid, plastic back box

XFP501/X XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £526.50XP95/Discovery version, code entry, c/w 3A psu, metal lid, metal back box

XFP501K/X XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £536.50XP95/Discovery version, keyswitch entry, c/w 3A psu, metal lid, metal back box

XFP502/X XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £661.50XP95/Discovery version, code entry, c/w 3A psu, metal lid, metal back box

XFP502K/X XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £671.50XP95/Discovery version, keyswitch entry, c/w 3A psu, metal lid, metal back box

XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

• Now fully third-party approved to EN54 parts 2 & 4 by the LPCB

• Compatible with Hochiki’s ESP & Apollo’sXP95 & Discovery protocols

• Can be configured to sit on a network of up to 8 interconnected XFP main panels. (Alternatively, up to 8 XFP repeaters can be connected to a non-networked main panel)

• Two independently programmable conventional sounder circuits

• Two programmable inputs, a fault output relay and three programmable relay outputs with volt free changeover contacts

• Zone dependency (coincidence), day/night (building occupied/unoccupied) and investigation delay period functions

• Individual device sensitivity settings

• Phased evacuation facility

• Code or keyswitch entry to Access Levels 2 & 3 (dependent on model purchased)

• 40 characters of custom text per device

• 500 event monitoring

• Comprehensive test, maintenance and commissioning functions (including auto-learn loops, monitor a point, test outputs, OMT and loop continuity test)

• An intuitive Windows based upload-download PC program

• Fully compatible with the new Hush Button fire alarm solution for houses of multiple occupation (see below)

XFP 1-2 LOOP EN54 NETWORKABLE FIRE PANELS

XFP501E/H XFP Networkable single loop 16 zone panel (LPCB approved to EN54-2/4) £360.00Hochiki ESP version, code entry, c/w 1.4A psu, plastic lid, plastic back box

XFP501EK/H XFP Networkable single loop 16 zone panel(LPCB approved to EN54-2/4)) £370.00Hochiki ESP version, keyswitch entry, c/w 1.4A psu, plastic lid, plastic back box

XFP501/H XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £526.50Hochiki ESP version, code entry, c/w 3A psu, metal lid, metal back box

XFP501K/H XFP Networkable one loop 32 zone panel (LPCB approved to EN54-2/4) £536.50Hochiki ESP version, keyswitch entry, c/w 3A psu, metal lid, metal back box

XFP502/H XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £661.50Hochiki ESP version, code entry, c/w 3A psu, metal lid, metal back box

XFP502K/H XFP Networkable two loop 32 zone panel (LPCB approved to EN54-2/4) £671.50Hochiki ESP version, keyswitch entry, c/w 3A psu, metal lid, metal back box

XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

XFP510-16 XFP Networkable repeater panel, 16 zones (all protocols) £262.00Code entry, c/w psu, plastic enclosure

XFP510-16K XFP Networkable repeater panel, 16 zones (all protocols) £270.00Keyswitch entry, c/w psu, plastic enclosure

XFP510-32 XFP Networkable repeater panel, 32 zones (all protocols) £360.00Code entry, c/w psu, metal lid, metal back box

XFP510-32K XFP Networkable repeater panel, 32 zones (all protocols) £370.00Keyswitch entry, c/w psu, metal lid, metal back box

CFP761 CFP/XFP network communications card for XFP 16 zone panels £60.34(all protocols, one required per master for network or repeater function)

AFP711 CFP/XFP network communications card for XFP 32 zone panels £91.00(all protocols, one required per master for network or repeater function)

AFP385 Flush mounting bezel (for XFP 32 zone masters & repeaters) £27.61AFP709 XFP printer kit, incl. lead & socket (not compatible with XFP 16 zone panels) £342.15XFP507 XFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead £80.00SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £15.50

XFP ANCILLARIES (REPEATERS, NETWORK CARDS, PRINTERS AND SOFTWARE)

XFP508H BS5839-6 Hush Button (Hochiki ESP) £70.00XFP508X BS5839-6 Hush Button (Apollo XP95/Discovery/Xplorer) £70.00

BS5839-6 HUSH BUTTONS

NEW

NEW

BS5839-6 HUSH BUTTONS

HushButton

HUSH

HushButton

HUSHEOLs

EOLs

Communal analogue addressable fire panel

Conventional detectors and sounders wired on three core fire resistant cable (0V is common).

Dwelling 1

Dwelling 2

4 Provides each individual HMO dwelling with • A 2-minute silence facility to BS5839-6 clause 12.2a • A 15-minute hush facility to BS5839-6 clause 12.2a

4 On-board loop isolator included

4 Entire system fully monitored to BS5839-1

4 f bl d h h

Max. 20 Hush Buttons per loop (dependent on host panel output current and devices connected)

Max. cable length = 100m

• A new BS5839-6 compliant fire alarm solution for houses of multiple occupation (HMOs)

• Designed to sit on an Apollo or Hochikianalogue addressable loop (see right)

• Each Hush Button has its own conventionaldetector circuit, conventional sounder circuit and onboard loop isolator

• Provides each HMO dwelling with a two-minute silence facility and 15-minute isolate facility

LPCB Ref. 176bto BS EN 54 pts 2 & 4



AFP 1-2 LOOP EN54 FIRE PANELS

AFP701E/W AFP economy 1 loop panel, does not extend (System Sensor) plastic lid £378.00

AFP701/W AFP 1 loop panel, extends to 2 loop, (System Sensor) plastic lid £526.50

AFP701/WM AFP 1 loop panel, extends to 2 loop, (System Sensor) metal lid £616.50

AFP702/W AFP loop driver card (System Sensor) £135.00

AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

AFP703 AFP 16 zone extension LED kit (all protocols) £180.00

AFP710* AFP 16 zone fully functional repeater (all protocols), plastic lid £490.00

AFP711* AFP network driver card, 1 per repeater system, fit at master (all protocols) £91.00

AFP709 AFP printer kit including printer, lead and socket £342.15

AFP385 AFP flush mounting bezel, fits all AFP variants £27.61

AFP707 AFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead £80.00

SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £15.50

AFP ANCILLARIES (REPEATERS, NETWORK CARDS, PRINTERS AND SOFTWARE)

AFP701E/N AFP economy 1 loop panel, does not extend (Nittan) plastic lid £378.00

AFP701/N AFP 1 loop panel, extends to 2 loop, (Nittan) plastic lid £526.50

AFP701/NM AFP 1 loop panel, extends to 2 loop, (Nittan) metal lid £616.50

AFP702/N AFP loop driver card (Nittan) £135.00

AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)

• Designed to comply with EN54 parts 2 & 4

• System Sensor or Nittan protocols

• 16 zonal alarm LEDs, expandable to 32

• Four conventional sounder circuits

• Alert, reset, ‘class change’ & silence inputs

• Auxiliary fire, fault, remote, pre-alarm, reset and 24V outputs

• Programmable delay / phased evac. facilities

• Intuitive PC programming software

• Optional AFP Network Driver Card allows the connection of up to 15 AFP repeaters*

Items marked * not compatible with AFP Economy panels

XP95 DetectorsBF302XPH 55000-400 standard temperature (55ºC) heat detector, no base £42.00BF303XPH 55000-401 high temperature (90ºC) heat detector, no base £42.00BF314XPH 55000-885 multisensor, no base £58.33BF316XPH 55000-600 optical smoke detector, no base £43.00BF317XPH 55000-500 ionisation smoke detector, no base £43.00BF308XP 45681-210 standard base c/w XPERT card £5.00BF308XPR 45681-242 low power relay base c/w XPERT card £27.00BF308XPC 38531-771 blank XPERT card £0.53BF308XPC126 45682-127 Complete set of 126 pre-addressed XPERT cards £54.00

XP95 Beam DetectorsBF369XBD 55000-265 loop powered beam detector (incl. transmitter, receiver & interface) £839.00BF369X/1 55000-268 loop powered reflective beam detector (5-50m, 1 reflector supplied) £714.28BF369X/2 55000-273 loop powered reflective beam detector (50-100m, 4 reflectors supplied) £771.43BF369XFD 55000-295 loop powered flame detector in flameproof housing £2187.50

XP95 Manual Call pointsBF370XP 55100-905 manual addressable call point, red £43.75BF370XP/W 55100-950 waterproof IP67 manual addressable call point, red £156.70BF370XPG 39117-217 spare glass for manual addressable call point £0.72

XP95 IsolatorsBF308XP/20 45681-321 isolating base (isolates up to 20 devices) £32.00AFP735 55000-720 isolator, needs BF308XPI base £35.00BF308XPI 45681-211 isolator base (for use with AFP735) £6.50AFP735DD 55000-802 dual isolator, DIN style £77.14

XP95 Loop Powered Sounders, Beacons and Sounder/Beacon combinationsBF330XBSI 45681-277 integrated base sounder with isolator (55-91dB) £42.86BF330XRBI 45681-330 sounder beacon base with isolator (55-91dB) £95.71BF330XBSCR 45681-293 locking red cap for use with sounder/bases/beacons £2.86BF330XBSCW 45681-292 locking white cap for use with sounder/bases/beacons £2.86BF330XAB 45681-276 ancillary base sounder £37.14BF330XASR 55000-278 red stand alone loop powered sounder 100/92dB £74.28BF330XASW 55000-279 white stand alone loop powered sounder 100/92dB £74.28

continues overleaf >>>

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS

ANALOGUE ADDRESSABLE PERIPHERALSPROTOCOL-SPECIFICDETECTORS, CALLPOINTS, SOUNDERS, BEACONS, MODULES, ETC.

NEW

NEW

NEW




XP95 Loop Powered Sounders, Beacons and Sounder/Beacon combinations (continued)

BF330XSR 55000-001 Sonos open area red sounder with isolator £58.57

BF330XSW 55000-002 Sonos open area white sounder with isolator £58.57

BF330XSRBR 55000-005 Sonos open area red sounder beacon with isolator £88.00

BF330XSRBC 55000-006 Sonos open area clear sounder beacon with isolator £88.00

BF333XSR 55000-009 Sonos open area red beacon with isolator £54.00

BF333XSC 55000-010 Sonos open area clear beacon with isolator £54.00

BF340X 55000-877 loop powered beacon £44.11

BF340XBI 45681-333 beacon base with isolator £45.71

XP95 Modules

XFP508X BS5839-6 Hush Button (XP95/Discovery/Xplorer), requires double gang back box £70.00AFP730I 55000-847 input output unit, with isolator (includes back box) £91.67AFP730D 55000-803 input output unit, DIN style £87.14AFP730DM 55000-799 mains rated input output unit, DIN style £140.00AFP730MS 55000-875 input output unit, mains switching £127.78AFP732I 55000-852 sounder control unit with isolator (includes back box) £111.42AFP732D 55000-826 sounder control unit, DIN style £114.29AFP732DH 55000-181 hi-power sounder control unit, DIN style £129.28AFP733I 55000-849 output unit with isolator (includes back box) £84.72AFP733D 55000-804 output unit, DIN style £78.57AFP734I 55000-845 zone monitor with isolator (includes back box) £90.27AFP734ID 55000-812 zone monitor with isolator, DIN style £88.89AFP736I 55000-843 switch monitor with isolator (includes back box) £79.17AFP736D 55000-822 switch monitor, DIN style £80.56AFP737I 55000-841 switch monitor plus with isolator (includes back box) £90.69AFP737D 55000-821 switch monitor plus, DIN style £87.50AFP738 55000-832 mini switch monitor with interrupt (no back box required) £50.51AFP731D 55000-760 mini switch monitor, DIN style £59.00If the module you require is not listed, please contact our sales desk

XP95 ‘Xpander’ radio smoke and heat detection devices

BF302XPXH 11171 CS heat detector with radio base/address module £285.71

BF303XPXH 11170 A1R heat detector with radio base/address module £285.71

BF314XPXH 13032 multisensor detector with radio base/address module £328.57

BF316XPXH 12034 optical detector with radio base/address module £285.71

BF370XPX 14006 manual call point with integral radio address module £271.42

BF330XAXSR 14001 Red stand alone sounder with red radio base £371.42

BF330XAXSW 14002 White stand alone sounder with white radio base £371.42

BF333XAXR 14003 Red stand alone sounder beacon with red radio base £428.57

BF333XAXA 14004 Amber stand alone sounder beacon with white radio base £428.57

BF333XAXC 14005 Clear stand alone sounder beacon with white radio base £428.57

AFP746 14007 Interface module with isolator, takes 15 addresses, incl aerial £571.42

AFP746S 14008 External standard aerial £185.71

AFP746D 14009 External directional aerial £328.57

AFP746ST 14010 Survey tool £500.00

APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS (continued)

BF302DH 58000-400 heat detector, no base £52.00BF314DH 58000-700 multisensor detector, no base £71.50BF316DH 58000-600 optical smoke detector, no base £53.00BF317DH 58000-500 ionisation smoke detector, no base £53.00BF313DH 58000-300 carbon monoxide fire detector, no base £71.50BF370DP/S 58100-910 surface mounting manual call point c/w back box £53.00BF370DP/F 58000-920 flush mounting manual call point c/w terminal tray £63.00BF370DP/SI 58100-908 surface mounting manual call point with isolator c/w back box £62.57BF370DPWI 58100-951 weatherproof call point with isolator, IP67 £185.71

Note all XP95 bases, isolators, interfaces, sounders and beacons are also compatible with the Discovery range.

APOLLO DISCOVERY ANALOGUE ADDRESSABLE PERIPHERALS

NEW

SEE PAGE 15 FOR C-TEC MANUFACTURED ANALOGUE ADDRESSABLE PERIPHERALS DESIGNED FOR USEWITH APOLLO XP95 & DISCOVERY FIRE PANELS

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

page 14


solidstatesecurity.co.uk01257 463018 01257 462038 [email protected] 15

HOCHIKI ESP ANALOGUE ADDRESSABLE PERIPHERALS

Hochiki ESP DetectorsBF302HEH ACB-E Fixed temperature/ROR heat sensor, no base £47.00BF302HEWH ACB-E/W Fixed temperature/ROR heat sensor, weatherproof, no base £95.71BF314HEH ACA-E Multi-sensor, no base £70.00BF316HEH ALG-E Photo-electric smoke sensor, no base £43.70BF317HEH AIE-E Ionisation smoke sensor, no base £52.00BF308HE YBN-R/3 Sensor base £5.00

Hochiki ESP Manual Call pointsBF370H HCP-E Addressable call point, flush, red (no back box) £47.15BF370HD HCP-DPS Addressable call point, flush, red, dual pole (no back box) £99.71BF370HW HCP-W Addressable call point, red, weatherproof c/w back box £157.76BF370HB SR Surface mounting back box, red £3.57BF370HB3 SR-1T Surface mounting back box, red, 1 terminal for BF370HD £5.00

Hochiki ESP IsolatorsBF308HEI YBO-R/SCI Short circuit isolator base, needs AFP755C for stand alone use £27.14AFP755C S/ICAP Isolator cover for wall mounting BF308HEI £2.15AFP755D CHQ-SCI/DIN DIN rail mounting short circuit isolator £43.55

Hochiki ESP Loop Powered Sounders, Beacons and Sounder/Beacon combinationsBF330HE YBO-BS Loop powered base sounder (needs BF308HE base) £41.25BF330HEB YBO-BSB Loop powered base sounder with beacon (needs BF308HE base) £73.54BF330H CHO-WS2 Loop powered 100dB wall mounting sounder £57.37BF330H/IB YBO-R/SCI Red isolator base for BF330H £22.71BF330H/WK WS2-WPK Weatherproof kit for BF330H £12.14BF330H/RB YBO-R/3 Red mounting base for BF330H £3.10BF330H/RBI YBO-RSCI Red isolator base for BF330H £24.09AFP755C SI/CAP Cover for BF330HE, BF330HEB, BF308HEI sounder/isolators £1.47BF340HE CHQ-AB Loop powered beacon, red £46.05BF340HEA/B CHQ-AB (AMB/BLU) Loop powered beacon, amber/blue £46.05

Hochiki ESP ModulesXFP508H BS5839-6 Hush Button (Hochiki), loop powered (needs double gang back box) £70.00AFP752 CHQ-DSC Dual sounder controller c/w isolator £128.57

requires 24VDC supply (needs AFP750B)

AFP753 CHQ-DRC Dual relay controller c/w isolator, loop powered (needs AFP750B) £94.14AFP753D CHQ-R/DIN DIN rail mounting dual relay controller (J type) £99.28AFP753/240 CHQ-MRC Mains relay controller c/w isolator, loop powered (needs AFP750B) £82.85AFP754 CHQ-Z Dual zone monitor, requires 24VDC supply (needs AFP750LB) £136.42AFP754M CHQ-SZM Single zone monitor c/w isolator, loop powered (needs AFP750B) £77.85AFP754DM CHQ-MZ/DIN DIN rail mounting mini zone monitor (J type) £88.42AFP756 CHQ-DIM Dual input monitor c/w isolator, loop powered (needs AFP750B) £72.15AFP756D CHQ-S/DIN DIN rail mounting dual switch monitor (J type) £82.71AFP759 CHQ-Z(IS) Intrinsically safe dual monitor (needs AFP750LB) £256.42AFP760 CHQ-SCI/DIN DIN rail mounting short circuit isolator (J type) £42.86AFP750A CHQ-ADAPTOR ESP CHQ adapter £4.86AFP750B CHQ-BOX I/O box £11.42AFP750LB CHQ-BOX/L I/O unit large box £17.85AFP751 CHQ/ARI Loop powered remote indicator £47.17

Hochiki ESP Ancillary EquipmentAFP757 O/CALG/SLR Outer cover removal tool £97.75AFP758 TCH-B100 Hand held address programmer £121.87

NEW

XFP508X BS5839-6 Hush Button (XP95/Discovery/Xplorer), requires double gang back box £70.00

BF330CASR 24V red Vantage loop powered sounder c/w shallow base £48.50

BF330CASW 24V white Vantage loop powered sounder c/w shallow base £48.50

BF330CASR2 24V red Vantage loop powered sounder (slow whoop version) c/w shallow base £49.00

BF330CADR 24V red Vantage loop powered sounder c/w deep base £49.50

BF330CADW 24V white Vantage loop powered sounder c/w deep base £49.50

BF330CADR2 24V red Vantage loop powered sounder (slow whoop version) c/w deep base £50.00

BF340CASR 24V red Vantage loop powered beacon c/w shallow base £42.94

BF340CADR 24V red Vantage loop powered beacon c/w deep base £43.58

BF333CASR 24V red Vantage-Combi loop powered sounder/beacon c/w shallow base £71.30

BF333CASW 24V white Vantage-Combi loop powered sounder/beacon c/w shallow base £71.30

BF333CADR 24V red Vantage-Combi loop powered sounder/beacon c/w deep base £72.30

BF333CADW 24V white Vantage-Combi loop powered sounder/beacon c/w deep base £72.30

BF330CR 24V white Vector loop powered base sounder £36.55

BF330CRLIDW Optional white lid for BF330CR (required for stand alone use) £4.13

Also available: The AVAC XP95-compatible voice alarm system - see page 17 for details

C-TEC MANUFACTURED PERIPHERALS DESIGNED FOR USE WITH APOLLO XP95 & DISCOVERY FIRE PANELS

NEW



Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS

SYSTEM SENSOR ANALOGUE ADDRESSABLE PERIPHERALS

System Sensor Detectors

BF302WPH 5251HTEM 78o fixed temperature heat detector, no base £44.00

BF303WPH 5251REM rate of rise heat detector, no base £44.00

BF316WPH 2251EM optical smoke detector, no base £42.50

BF317WPH 1251E ionisation smoke detector, no base £43.00

BF308WP B501 standard base £5.00

BF308WPR B524RTE mounting base with relay £35.00

BF309W M02-04-00 test magnet £3.00

BF316WFH FTX-P1 ‘Filtrex’ optical smoke detector, no base £315.00

BF316WFF RF-FTX spare filters for ‘Filtrex’ optical smoke detector, pack of 6 £80.00

BF308WF B501B-FTX base for ‘Filtrex’ optical smoke detector £45.00

System Sensor Manual Call Points

BF370WP M500KAC manual call point £43.00

BF370WPBB SR3T manual call point, back box £4.50

BF370WPW M500KACW weatherproof call point, back box included £177.98

BF370WPG/10 E-G/10 glass for BF370WP, pack of 10 £7.97

BF370WPTT ETT-P terminal tray for flush call point £5.25

System Sensor Isolators

BF308WPI B5241EFT isolating base (isolates up to 20 detectors) £18.50

AFP726 M200XE isolator module, back box not included £32.00

System Sensor Loop Powered Sounders

BF330WR EMA24ALR loop powered sounder, red, base not included £55.00

BF330WW EMA24ALW loop powered sounder, white, base not included £55.00

BF330WBASED ES-BR deep base for loop powered sounder, red £2.51

BF330WBASEW DBS24ALW low profile loop powered sounder, white £58.00

BF330WBASEWL DBS24ALWLW low profile loop powered sounder, lid included £58.50

System Sensor Modules

AFP720 M210E monitoring module, back box not included £51.50

AFP721 M503ME micro monitor unit £38.00

AFP722 M201E control module, back box not included £66.00

AFP724 M512ME conventional zone module, back box not included £90.00

AFP725 M200E-SMB enclosure, surface mount £6.20

Nittan Detectors & Manual Call Points BF302NPH ST-H-AS heat detector, no base £39.90

BF316NPH ST-P-AS optical smoke detector, no base £43.00

BF317NPH ST-I-AS ionisation smoke detector, no base £43.00

BF308NP STB-4 addressable base £4.75

BF370NP ST-NCP-AS manual call point, back box not included £43.00

BF370NPBB Back box for ST-NCP-AS £4.47

BF371 Spare glass for ST-NCP-AS, one only £0.54

Nittan Isolators

AFP741 SCI-4 short circuit isolator (boxed) £44.00

BF308NP/20 SCI-5 short circuit isolator base, will accept heat, optical & ion detectors £32.00

Nittan Loop Powered Sounders

AFP745 SCM-AS3 sounder output module, c/w back box £94.00

BF330NC VCT-03-ASNB wall mounted loop sounder, white £59.55

BF330NB VCT-03-NTAS base mounted loop sounder, white c/w STB-4 base £60.60

BF330NBH ST-VMS-AS bedhead loop sounder, fits standard single gang back boxes £60.60

Nittan Modules

AFP742 MCM-AS3 zone monitor module, c/w back box £88.00

AFP743 NAM-AS3 input module, c/w back box £53.20

AFP744 OCM-AS3 output module, c/w back box £74.57

NITTAN ANALOGUE ADDRESSABLE PERIPHERALS

page 16

VOICE ALARM SYSTEMS



A low-cost, high quality modular voicealarm system purposely designed tosimplify the provision of a fully BS5839-8compliant voice alarm system. In onecompact wall-mounting enclosure, theAVAC comprises:-

• A straightforward fire alarm interface that can be connected to any analogue addressable fire alarm system via a series of input/output units on the loop

• An Apollo specific interface for direct connection to an XP95 or Discovery loop

• A high-quality digital message store containing programmable Evacuate, Alert and Test messages

• A prioritised mixer

• Two x 60-Watt max. peak Class D amplifiers (plus an optional standby amp)

• An EN54-4 compliant switch mode power supply and battery charger

• Three balanced line level inputs for the (optional) connection of a fire mic, paging/public address equipment and a background music source

• Space for 2 x 7Ahr VRLA batteries typically providing at least 24 hours standby and 30 mins alarm running time

• A slave line level output allowing the connection of up to 26 slave AVACs

AVAC VOICE ALARM SYSTEM

VA403 Master AVAC dual 60W amplifier, charger & PSU £1,100.75includes fire alarm interface, fire microphone, paging and BGM connections

VA403H Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00includes fire alarm interface, fire microphone, paging and BGM connections

VA402 Slave AVAC dual 60W amplifier, charger & PSU £795.00includes local paging and BGM connections

VA402H Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £930.00includes local paging and BGM connections

VA405 Emergency microphone (max. 1 per system) £450.00

VA407 Emergency microphone for multi-mic applications (2 to 4 per system) £600.002 x VA407s limits the no. of master AVACs to 20, 3 x VA407s to 10, 4 x VA407s to 6

VA406 Line level paging microphone (max. 1 per system) £250.00

AVAC MODULES, AMPLIFIERS & ANCILLARIES

VA421A 6” 6W ceiling speaker £32.07c/w steel fire dome & ceramic terminal block

VA422A 8W wall mounting metal cabinet speaker £47.89c/w ceramic terminal block

VA423 8W wall mounting bi-directional metal speaker £61.90c/w ceramic terminal block

VA428 20W pendant loudspeaker £86.50c/w 8m cable and internal stress wire (requires VA490 or VA492)

VA430 6W round wall/ceiling speaker in metal cabinet £37.05c/w ceramic terminal block

VA490 Ceramic terminal block and thermal fuse assembly £3.45(use to convert wire-end sealers to BS 5839-8, needs adaptable back box)

VA492 VA loudspeaker metal termination box £14.85c/w 2 x ceramic terminal blocks and thermal fuses

Speakers for special applications - column, horn, sound projection, spherical suspension, etc -areavailable to order. Please contact our technical department for details.

LOUDSPEAKERS (TO BS 5839-8)

TOTAL CAPABILITY VA/PA SYSTEMSFrom a simple single zone alarm system in a shop unit to a school, theatre or hotel with multiple zones and many hundredsof speakers, we have the equipment and expertise to provide a compliant and cost-effective VA/PA solution.

Our AVAC, Integrity, LinX and SigNET LS voice alarm systems are installed in buildings all over the world including theatres,multi-screen cinemas, international airports, shopping centres, high rise buildings, offices, hotels, leisure centres, footballstadia, exhibition centres, railway stations and theme parks.

Should you require any further information, please contact our Specialist Support Division which specialises in project supplychain management, sales training (system design and application), engineer training (installation and commissioning) andproduct application guidance. Call our sales desk for details.

LOADMASTER Loudspeaker line tester £137.85

PNGN Pink noise generator £61.90

AVAC TESTING EQUIPMENT

NEW

FIRE TELEPHONE SYSTEM


SIGTEL EMERGENCY VOICE COMMUNICATION SYSTEM

ECU-8 8 Line Master EVC control unit c/w line cards, handset and display £1085.00Wall-mounting, needs BC286/2 batteries

ECU-8NT 8 Line Master EVC control unit (no handset) c/w line cards and display £910.00Wall-mounting, needs BC286/2 batteries (typically used on networked systems that do not require multiple control points)

ECU-8S 8 Line Slave EVC expansion unit (expands ECU-8/ECU-8NT to 16 lines) £757.00Wall-mounting, max. one ECU-8S per ECU-8/ECU-8NT, no batteries required

ECU721 Network communication card £105.00(allows up to four ECU-8 or ECU-8NT controllers to be interlinked - one required per networked ECU-8 or ECU-8NT)

AFP385 Grey flush bezel for ECU-8, ECU-8NT or ECU-8S £27.61

BF359/2 Anti-tamper enclosure for ECU-8, ECU-8NT or ECU-8S £312.50

SIGTEL 8-64 LINE CONTROLLERS

NEW

NEW

FOR DISABLED REFUGE, FIRE TELEPHONE & STADIUM MARSHAL APPLICATIONS

CCU-16 16 line master EVC control unit with display, wall-mounting £952.00Needs a separate ECU desk dial unit, LC2/LC3 line cards & BC286/2 batteries

SCU-16 16 line slave EVC expansion unit (expands CCU-16 in 16 line multiples) £595.00Wall-mounting, needs LC2/LC3 line cards & BC286/2 batteriesMax. seven SCU-16 slaves per CCU-16 master (allows up to 128 lines)

LC2 2-way Line Card for Type A Fire Telephone Outstations £24.99One card required per two Type A outstations connected to a CCU or SCU

LC3 2-way Line Card for Type B Disabled Refuge Outstations £22.14One card required per two Type B outstations connected to a CCU or SCU

SVMM Two message card for CCU (optional) £238.00

SVMM/C Custom message card for CCU (optional) £599.00

AFP385 Grey flush bezel for CCU-16 or SCU-16 £27.61

ECU-32 32 line Desk control unit with handset and display £1,428.00



ECUWMB Wall Mount Bracket for ECU-32, ECU-64, ECU-128 £14.50

For outstations and accessories, please refer to the SigTEL Compact listing above

SIGTEL 16-128 LINE CONTROLLERS & DIAL UNITS

THS1-E/MK4 Fire telephone EVC outstation, c/w red steel case, handset & key £211.82

THS1-ET/MK4 Fire telephone EVC outstation, c/w red steel case, handset & T-Bar £211.82

T-BEZ Red flush bezel for THS1-E/MK4 and THS1-ET/MK4 £14.28

THS/MK4 Red desk mounted telephone ONLY £116.62

FIRE TELEPHONE (TYPE A) OUTSTATIONS

EVC302F Handsfree duplex EVC outstation, stainless steel, flush mounting £176.00

EVC302S Handsfree duplex EVC outstation, stainless steel, surface mounting £187.55

BF359/1 Weatherproof enclosure, IP66, steel, non-locking (for EVC302F) £110.00

DISABLED REFUGE (TYPE B) OUTSTATIONS

FiTT EVC line tester £120.00

CATCON Adaptor box to convert fire-rated cable to Cat 5 £22.20

XSB Blue xenon strobe, 12V £30.00

XSA Amber xenon strobe, 12V £30.00

SDM Strobe driver module, 12V £15.00

BC286/2 24V Volt 7.0 Ahr SLA battery (2 x 12V including link wire) £40.30

SIGTEL ACCESSORIES

• Meets and exceeds the requirements of BS 5839 part 9

• Ideal for all disabled refuge, fire telephone and stadium marshal applications

• Compact 1-8 line (expandable to 16 lines)wall-mounting central controller saves valuable desk and floor space in crowded control rooms

• New network communication card allows up to four master controllers to be interlinked allowing systems of up to 64 lines to be easily implemented

• Type B stainless steel ‘Disabled Refuge’ outstations offer true duplex hands-free speech - flush, surface and weatherproof versions are available

• Type A ‘Fire Telephone’ outstations come in locking or non-locking red steel cabinetsand offer true duplex speech - semi-flush and surface versions areavailable

• Unique ‘auto-learn’ facility allows fast network set up

• All extensions can be named with user-defined text of up to 15 characters

• Fully monitored hardware and software

• System operates at 24 VDC

• In the event of mains failure, operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries

• Optional line tester allows cable faults to be checked prior to equipment connection

• Ideal for hotels, shopping malls, office blocks, transport terminals, banks, sports stadia, entertainment complexes, auditoria, etc.

• 16-128 line wall/desk mounting central control equipment also available for larger systems

NEW

SIGTEL COMPACT (1-64 LINE) SYSTEM

SIGTEL (16-128 LINE) SYSTEM

page 18

CONVENTIONAL CALL SYSTEMS



DISABLED PERSONS TOILET ALARMS

800 SERIES CALL SYSTEM

NC951 Disabled persons toilet alarm kit £102.50Includes NC942B call controller c/w onboard battery backup facility, NC807C ceiling pull, NC806CS overdoor light c/w sounder, NC809DBB reset point c/w sounder & NC949 Disabled WC sticker

NC951STRIP Disabled persons toilet alarm kit c/w 1.5m strip switch £282.00Includes NC942B call controller c/w onboard battery backup facility, NC807C ceiling pull, NC806CS overdoor light c/w sounder, NC809DBB reset point c/w sounder, BF358/3 1.5m strip switch, NC889 call latch module & NC949 Disabled WC sticker

NC951/SS Stainless steel single zone call system kit £154.00Includes NC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light c/w sounder, NC809DB/SS s/steel reset point & NC949 Disabled WC sticker (no onboard battery backup)

All of the parts contained in the kits listed above can also be purchased separately if desired. In addition, systems can be expanded to include multi-zone indicator panels and/or additional calling devices, sounders, overdoor lights, etc. Refer to our full 800 Series Call System listing below for further details.

DISABLED PERSONS TOILET ALARMS / SINGLE ZONE EMERGENCY ASSISTANCE SYSTEMS

Capable of indicating standard and emergency calls

NC942 Single zone call controller c/w 12V 140mA PSU, reset button & relay £70.00

NC942B Single zone call controller c/w 12V 140mA PSU, reset button, relay & £78.00on-board rechargeable battery backup supply

NC941 Single zone call controller c/w 12V 250mA PSU & reset button £70.00

NC941/SS Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button £126.00

NC941B 0.3AHr battery backup kit, for use with NC941 & NC941/SS controllers £48.50

800 SERIES SINGLE ZONE EMERGENCY INDICATOR PANELS


NC944 Four zone call controller c/w mute/reset button, requires 12V PSU £55.00

NC944/SS Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU £151.33

NC930 12V 250mA PSU, powers up to 2 x four zone call controllers £50.00

NC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers £124.40

NC941B 0.3AHr battery backup kit, for use with NC930 and NC930/SS 12V PSUs £48.50

NC925B1 12V 1A white boxed PSU, powers up to 3 x four zone call controllers £55.24

AC284 2.1AHr backup battery, for use with NC925B1 12V PSU £9.57

800 SERIES 4-12 ZONE EMERGENCY INDICATOR PANELS


NC812KE 10 Zone Emergency master panel c/w 12V PSU, backup battery & mute button £198.72

NC811KE 10 Zone Emergency repeater panel £149.01











Larger Emergency master and repeater panels available to order, add per 10 zones £71.76

800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS

• NC951 includes everything required for a BS8300 clause compliant emergency assistance alarm (except cables & fixings)

• NC951STRIP kit includes an additional 1.5mstrip switch and call latch module

• NC951/SS Stainless steel kit also available

• Tried, trusted and respected

• Ideal for use in all types of private, commercial, residential and public sector buildings

• Hundreds of applications - suitable for use in hotels, leisure centres, nursing homes, shops, offices, GP surgeries, etc

• 12V d.c. system - simple to install, easy to use and highly reliable - standard six coresecurity cable ideal for most installations

• Wide range of indicator panels covering 1 to 90 zones

• Extensive range of ancillaries including ceiling pulls, wall-mounting call points, monitoring points, water resistant alert points, overdoor lights, infrared ceiling receivers, remote sounders and relays

• Attractive compact design

• Most wall-mounting components fit 25mm

UK single or double gang back boxes. Ceiling pulls and water resistant alertpoints are surface mountable.

• Two levels of call - standard (constant tone)and emergency (intermittent tone) (dependent on items purchased)

• No limit to system size - components can be mixed to meet the layout and call communication requirements of virtually any building

• Stainless steel versions of many components now available

NEW




Capable of indicating standard calls ONLY

NC810K 10 Zone Standard master panel c/w 12V PSU & reset button £160.31

NC811K 10 Zone Standard repeater panel £135.46











Larger Standard master and repeater panels available to order, add per 10 zones £65.25

800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS

Can be used to increase call indication levels

NC806C Overdoor light £15.52

NC806CS Overdoor light & sounder £24.39

NC806C/SS Overdoor light, s/steel £43.23

NC806CS/SS Overdoor light & sounder, s/steel £49.30

NC887D Switchable sounder £19.93

NC888D Remote sounder £8.86

800 SERIES OVERDOOR LIGHTS AND SOUNDERS

Generate standard calls only

NC807C Ceiling pull unit, no on-board reset, no remote socket £15.52

NC802DB Standard call point, button reset, with remote socket £19.93

NC802DBB Standard call point with braille label, button reset, with remote socket £24.90

NC802DM Standard call point, magnetic reset, with remote socket £19.93

NC917L Standard call push with protruding button, no on-board reset, no remote socket £15.22

NC802DEWM Master IP65 water resistant alert point, mag. reset, no remote socket £83.11

NC802DEWS Slave IP65 water resistant alert point, up to 10 per master £69.30

NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £141.00

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £95.80

800 SERIES STANDARD CALL POINTS

Generate standard calls only

NC894DKB Isolatable monitoring point, button reset, no remote socket £28.52

NC894DKM Isolatable monitoring point, magnetic reset, no remote socket £28.52

800 SERIES STANDARD MONITORING POINTS (door contacts included)

Generate standard and/or emergency calls (as shown)

NC802DEB-1/2 Emergency call point, button reset, with remote socket £29.09can generate standard and emergency calls

NC802DEM Emergency call point, magnetic reset, with remote socket £29.09can generate standard and emergency calls

NC802DEWM Master water resistant alert point, IP65, mag. reset, no remote socket £83.11can generate standard or emergency calls (not both)

NC802DEWS Slave water resistant alert point, IP65, max. 10 per master £69.30

NC802DESS IP69K sauna alert point (must be used as a slave to an NC802DEWM) £141.00

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £95.80can generate standard or emergency calls (not both)

NC804DE Emergency call / reset point, button reset, no remote socket £26.57can generate emergency calls only

NC809DEM Emergency call / reset point, magnetic reset, no remote socket £26.57can generate emergency calls only

800 SERIES EMERGENCY CALL POINTS

NEW



page 21

For use with infrared call points & ceiling receivers

QT412RXA Infrared transmitter, push/pull for emergency call £80.00

QT412RXCA Infrared transmitter, push for standard call/pull for emergency call £80.00

QT424/1 Single-way charging unit for QT412 range transmitters £15.00

QT424/10 Ten-way charging unit for QT412 range transmitters £185.00

800 SERIES RECHARGEABLE INFRARED TRANSMITTERS

Can be used to reset devices which do not have an onboard reset facility

NC809DB Button reset point £8.86

NC809DBB Button reset point c/w sounder and braille label £12.50

NC809DB/SS Button reset point, s/steel £43.60

NC809DM Magnetic reset point £8.86

NC899IRR Keyswitch reset point £22.50

800 SERIES RESET POINTS

For use with all magnetic call points, monitoring points and reset points

NC803M/10 10 x magnetic reset keys £28.50

NC803M/50 50 x magnetic reset keys £135.00

800 SERIES MAGNETIC RESET KEYS

Generate standard calls via a call point’s remote socket

NC805C/6 1.8m (6ft) tail call lead £10.14


NC805D 1.2-3.6m (4-12ft) tail call lead £15.52

NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £14.80

NC805AS Remote air switch for NC805P £35.36

NC805MD Portable movement detector £304.34

NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £7.90

800 SERIES ANCILLARY CALLING DEVICES

Generate standard and/or emergency calls when triggered by a compatible infrared transmitter

NC302RXC Infrared master ceiling receiver, no on-board reset, no remote socket £37.00

NC302RXCS Infrared slave ceiling receiver, up to 3 per master £25.00

NC802DERB Infrared call point, button reset, with remote socket £40.80

NC802DERM Infrared call point, magnetic reset, with remote socket £40.80

NC302RT Test infrared receiver £50.00

800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS

Generate standard or emergency calls when used in conjunction with an NC889 or NC889ERMcall latch module (the call level generated depends on the call latch module used)BF358/1 0.3m strip switch kit (incl. satin silver base rail, red insert and end caps) £23.50BF358/2 1m strip switch kit (incl. satin silver base rail, red insert and end caps) £69.28BF358/3 1.5m strip switch kit (incl. satin silver base rail, red insert and end caps) £75.78BF358/4 2m strip switch kit (incl. satin silver base rail, red insert and end caps) £135.97BF358/5 2.5m strip switch kit (incl. satin silver base rail, red insert and end caps) £140.633m, 4m, 5m, 6m, 7m & 8m strip switch kits also available - contact our sales desk for details POABF358/12 1.5m strip switch base rail, satin silver £55.52BF358/15 1m strip switch insert, black £9.13BF358/16 1m strip switch insert, red £9.13BF358/17 Strip switch end caps, black (pair) £5.05BF358/18 Strip switch internal/external corner unit c/w end caps, black £20.26BF358/19 Wired sleeves and tags (pack of 5) £8.31

800 SERIES ‘STRIP SWITCHES’

NC889 Call latch module, can trigger a standard call from a n/o or n/c switch £10.22

NC889ERM Multi-purpose call latch module, can trigger a standard and/or an emergency £16.12call from a normally open switch (includes confidence LED & on-board magnetic reset)

NC899KD Area isolator, can be used to isolate areas/zones £29.09continues overleaf >>>

MISCELLANEOUS 800 SERIES DEVICES

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW




C-CALL SELF-RESETTING DISPLAY PANELS

NC905KT 2 zone self-resetting display panel incl. labels (state names when ordering) £93.21



NC925C Double insulated PSU, one required per system £24.85

NC903 2 x spare display panel labels (state names when ordering) £3.68

NC941/SS Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button £126.00

NC944/SS Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU £151.33

NC930/SS 12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers £124.40

NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket £95.80

NC809DB/SS Stainless steel button reset point £43.60

NC806C/SS Overdoor light, s/steel £43.23

NC806CS/SS Overdoor light & sounder, s/steel £49.30

NC848/10 10 x anti-tamper screws £16.00

NC848/50 50 x anti-tamper screws £80.00

NC947 Anti-tamper Allen key, for use with anti-tamper screws £6.70

NC951/SS Stainless steel single zone call system kit £154.00NC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light c/w sounder, NC809DB/SS s/steel reset point & NC949 Disabled WC sticker

800 SERIES STAINLESS STEEL DEVICES

800 SERIES STAINLESS STEEL DEVICES

C-CALL WAITING ROOM CALL SYSTEM

C-CALL RECEPTION PANELS

NC911K 10 zone reception panel £135.46

NC921K 20 zone reception panel £200.71

C-CALL MANUAL RECEPTION RESET PANELS

NC912K-5 5 zone resettable reception panel c/w psu £160.31



C-CALL CALL PUSHES, OVERDOOR LIGHTS & REMOTE SOUNDERS

NC917L C-Call call push (latching or non-latching) £15.22

NC915L C-Call desk push/4ft lead (latching or non-latching), requires NC920 £19.54

NC920 C-Call wall socket, for use with NC915L desk push £4.97

NC806C Overdoor light £15.52

NC888D Remote sounder £8.86

• High quality brushed stainless steel versions of some of our most popular 800 Series devices - ideal for use in hospitals, clinics and many other prestigious / public sector applications

• Optional anti-tamper screws available for use in high-risk environments

• Attractive slimline indicator panels withpersonalised self-adhesive labels

• Available in self-resetting or manual reception reset formats

• Durable desk and wall mounting call pushes with call confirmation LEDs

• Simple to install - four core security cable is ideal for most installations

• Easily expandable with no limit to system size

• Optional overdoor lights and remote sounders available for increased call indication levels

• Low voltage, low current systems with optional back-up battery

• Logical operation

DP874B/4 Tone only UHF paging transmitter, supplied with one tone-only pager £485.43

DP875/4 Extra tone-only pager £195.00

800 SERIES TONE-ONLY PAGING EQUIPMENT

NCP-8 White 35mm flush mount UK single gang back box £1.72NCP-9 White 25mm surface mount UK single gang back box £1.40NCP-10 White 35mm flush mount UK double gang back box £2.44NCP-11 White 25mm surface mount UK double gang back box £2.52

PLASTIC BACK BOXES

NC884DE Emergency 5:1 input expander, can be used to provide area/zonal indication £16.74

NC885 Standard 5:1 input expander, can be used to provide area/zonal indication £10.22

NC883D 12V relay unit, can be used to switch sirens, strobes, etc. £31.04

NC848/50 50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments £80.00

NC947 Anti-tamper Allen key, for use with anti-tamper screws £6.70

MISCELLANEOUS 800 SERIES DEVICES (continued)

page 22

ADDRESSABLE CALL SYSTEMS


• Multiple call levels - standard call, help required (assist), emergency and optional infrared staff attack

• Up to 256 network devices per system

• Up to 45 custom place names per system

• Flexible call routing - allows the system to be tailored to suit a building’s exact operational needs

• Full monitoring of all network devices

• Free built-in 500 event datalogger

• Wide range of system components including call points, ceiling pulls, monitoring points, infrared ceiling receivers, radio receivers, dual-actioninfrared/radio transmitters, displays, overdoor lights and pagers

• Staff presence, call accept, manual and automatic call divert facilities

• Optional HTM2015 capability (requires specially designed third-party switch assemblies and indicators used in conjunction with our new range of Quantec universal devices - contact our technical department for advice).

QT601-2 Quantec controller £325.00AFP385 Flush bezel for Quantec controller £27.61QT707 Quantec upload/download software c/w SAF7070000 lead (Windows 2000/XP) £80.00

SAF7070000 2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female) £15.50QT707S Quantec Surveyor Data Management Software c/w wall socket & lead £300.00

Allows detailed data analysis reports to be sent direct to a PC’s desktop on criteriasuch as longest calls, busiest shifts, average call response times, etc.

QT608C Quantec corridor display, with controls £149.00QT608CD Quantec corridor display, no controls £149.00QT608CD1 Quantec large corridor display (800x160x80mm) requires 1 x QT615 £332.50QT615 Quantec display interface (for use with QT608CD1) £76.92QT603 Quantec network splitter £20.45

QUANTEC NETWORK CONTROLLERS, DISPLAYS, INSTALLATION AIDS

QUANTEC ADDRESSABLE CALL SYSTEM

QT606 Quantec overdoor light £18.45

QT606A Quantec addressable overdoor light c/w sounder £42.00

QT688 Quantec addressable sounder £41.00QT688/2 Quantec high-output 85dB addressable sounder £46.15

(with optional HTM2015 tone capability - requires QT423 configurator)

QUANTEC OVERDOOR LIGHTS & SOUNDERS

QT602 Quantec call point, button reset (standard label) £36.50QT602S Quantec call point with sounder, button reset £41.50QT602R Quantec call point with IR receiver, button reset £59.50QT602RS Quantec call point with sounder & IR receiver, button reset £64.50QT602M Quantec call point, magnetic reset £36.50QT602SM Quantec call point with sounder, magnetic reset £41.50QT602RM Quantec call point with IR receiver, magnetic reset £59.50QT602RSM Quantec call point with sounder & IR receiver, magnetic reset £64.50QT602D Quantec Slave call point £22.00QT602E Quantec Euro call point, button reset (nurse label) £36.50QT602ES Quantec Euro call point with sounder, button reset (nurse label) £41.50QT602ER Quantec Euro call point with IR receiver, button reset (nurse label) £59.50QT602ERS Quantec Euro call point with sounder & IR receiver, button reset (nurse label) £64.50QT602EM Quantec Euro call point, magnetic reset (nurse label) £36.50QT602ESM Quantec Euro call point with sounder, magnetic reset (nurse label) £41.50QT602ERM Quantec Euro call point with IR receiver, magnetic reset (nurse label) £59.50QT602ERSM Quantec Euro call point with sounder & IR receiver, mag reset (nurse label) £64.50

QUANTEC QT602 RANGE CALL POINTS (WITH REMOTE SOCKETS)

QT609 Quantec call point, button reset £36.00

QT609S Quantec call point, button reset with sounder £41.00

QT609R Quantec call point, button reset with infrared receiver £59.00

QT609RS Quantec call point, button reset with sounder & infrared receiver £64.00

QT609M Quantec call point, magnetic reset £36.00

QT609SM Quantec call point, magnetic reset with sounder £41.00

QT609RM Quantec call point, magnetic reset with infrared receiver £59.00

QT609RSM Quantec call point, magnetic reset with sounder & infrared receiver £64.00

QUANTEC QT609 RANGE CALL POINTS (NO REMOTE SOCKETS)

QT611 Quantec multi-purpose programmable device (unplated) £92.50Allows third-party switch assemblies & indicators to be interfaced to Quantec and to be engineer programmed to operate in a multitude of ways using a QT423 configurator

QT612 Quantec relay output device (unplated) £97.50A zone-specific relay output to trigger third-party strobes, sounders, auto-diallers, etc.

QT613 Quantec zonal indicator driver device (unplated) £92.50Can be used to drive third-party LED indicating devices

QT614 Quantec bedhead light dimmer interface (unplated) £30.00

QT423 Quantec configurator (required to program QT611/612/613/614 devices) £115.40

QUANTEC UNIVERSAL DEVICES

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

New ‘Euro’ Call Points with theinternationally-recognised

nursecall symbol now available

page 23




QT412RXA Quantec Mk2 Infrared/radio transmitter (push for attack/pull for attack) £80.00

QT412RXCA Quantec Mk2 Infrared transmitter (push for call/pull for attack) £80.00

QT424/1 Single-way charging unit for QT412 range transmitters £15.00

QT424/10 Ten-way charging unit for QT412 range transmitters £185.00

QT423 Quantec configurator (required to program QT412 range transmitters) £115.40

If ordering transmitters for an existing Quantec system, please see IMPORTANT NOTES below

QUANTEC RECHARGEABLE DUAL-ACTION INFRARED/RADIO (868MHz) TRANSMITTERS

Generate standard calls via a call point’s remote socket



NC805D 1.2-3.6m (4-12ft) tail call lead £15.52

NC805P Hand/foot pneumatic pad, requires 1 x NC805AS £14.80

NC805AS Remote air switch for NC805P £35.36

NC805MD Portable movement detector £304.34

NC805DSP Double remote jack socket, allows two ancillary calling devices to be connected £7.90

QUANTEC ANCILLARY CALLING DEVICES

QT422RX Quantec Mk2 radio receiver (compatible with QT412 range transmitters only) £212.10

QT422RXEX External extension aerial for QT422RX radio receiver £150.00

QT421 RF integrity ‘monitored heartbeat’ transmitter (use at least 1 per QT422RX) £84.60

If ordering radio receivers for an existing Quantec system, please see IMPORTANT NOTES below

QUANTEC Mk2 (868MHz) RADIO RECEIVERS

QT302RX Quantec master infrared ceiling receiver £60.00

QT302RXS Quantec slave infrared ceiling receiver £45.00

QT302RT Quantec test infrared ceiling receiver £50.00

QUANTEC INFRARED CEILING RECEIVERS

For use with Quantec infrared call points, infrared ceiling receivers and Mk2 radio receivers

QT604 Quantec monitoring point, button reset £36.90

QT604M Quantec monitoring point, magnetic reset £36.90

QUANTEC MONITORING POINTS

NC803M/10 Pack of 10 magnetic reset keys £28.50

NC803M/50 Pack of 50 magnetic reset keys £135.00

QUANTEC MAGNETIC RESET KEYS

Generate standard calls (when connnected to a Quantec call point), standard or emergency calls (when connected to a Quantec monitoring point) and standard, help required, emergency or attack calls (when connected to a QT611 universal programmable device.BF358/1 0.3m strip switch kit (incl. satin silver base rail, red insert and end caps) £23.50BF358/2 1m strip switch kit (incl. satin silver base rail, red insert and end caps) £69.28BF358/3 1.5m strip switch kit (incl. satin silver base rail, red insert and end caps) £75.78BF358/4 2m strip switch kit (incl. satin silver base rail, red insert and end caps) £135.97BF358/5 2.5m strip switch kit (incl. satin silver base rail, red insert and end caps) £140.633m, 4m, 5m, 6m, 7m & 8m strip switch kits also available - contact our sales desk for details POABF358/12 1.5m strip switch base rail, satin silver £55.52BF358/15 1m strip switch insert, black £9.13BF358/16 1m strip switch insert, red £9.13BF358/17 Strip switch end caps, black (pair) £5.05BF358/18 Strip switch internal/external corner unit c/w end caps, black £20.26BF358/19 Wired sleeves and tags (pack of 5) £8.31

QUANTEC ‘STRIP SWITCHES’

QT607 Quantec ceiling pull unit £16.00

QUANTEC CEILING PULLS

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

page 24




QT600P Quantec printer kit incl. printer, lead & wall socket £342.15

QT600S Quantec printer/paging wall socket £17.22

QUANTEC PRINTERS

DP874QA Display pager transmitter for alphanumeric pagers, 400m range £841.71incl. display pager transmitter, lead and wall socket

DP876D Display pager aerial, up to 1500m range £95.00

DP876B Mounting bracket for DP876D £25.00

DP876F 15 metre low loss cable for DP876D £70.00

DP877QA 32 character alphanumeric display pager, group A £290.00

QUANTEC PAGING EQUIPMENT

NCP-8 White 35mm flush mount UK single gang back box £1.72NCP-9 White 25mm surface mount UK single gang back box £1.40NCP-10 White 35mm flush mount UK double gang back box £2.44NCP-11 White 25mm surface mount UK double gang back box £2.52

PLASTIC BACK BOXES

All of the items listed in our Quantectrade price list are fully compatible witheach other. However, if purchasingitems for an existing Quantec system,there may be compatibility issues,particularly on sites where old-styleradio receivers QT322RX (SPE0441/000)and/or old-style infrared transmitters orinfrared call points/receivers are used. These compatibility issues are covered ingreater detail in technical bulletin no.1/020605 and technical bulletin no.4/150307 copies of which can beobtained from our sales desk.

IMPORTANT NOTES

INDUCTION LOOP EQUIPMENT

PDA RANGE INDUCTION LOOP EQUIPMENT

• The widest range of audio-frequency induction loop equipment in the UK

• Designed to meet or exceed the requirements of BS7594 and BS-EN60118-4 when correctly installed

• Available in a variety of cost-effective kit formats suitable for use in ticket offices, meeting rooms, lecture theatres, nursing homes, GP surgeries, churches and shops

• Allows hearing aid users to participatefully in general conversation and other social/work related activities

• No audio experience required - our loop systems can be fitted by any competent electrician

• Extensive range of induction loop testing equipment now available including sine wave generators, magnetic field strength meters and loop listening devices

• Can be used to help building managersand service providers comply with BS8300, the Disability Discrimination Act, the Care Standards Act and the English Tourism Council’s National Accessibility Scheme

ML1/K ML1 counter induction loop kit £60.61c/w ML1 wall-mounting double gang loop amplifier, AMT mic. and TX2 counter loop

PDA102C PDA102 counter induction loop kit £140.73c/w PDA102 free-standing loop amplifier, AMT microphone and TX121 counter loop

1.5m2 COUNTER INDUCTION LOOP AMPLIFIER KITS

DL50 50m2 Domestic induction loop amplifier £85.00DL50/K DL50 50m2 Domestic induction loop amplifier kit £98.00

c/w DL50 free-standing loop amplifier, AMT tie/desk mic., APS scart lead & loop cable

PDA102L PDA102 50m2 Small room loop kit (tie/desk mic version) £120.10c/w PDA102 free-standing loop amplifier, AMT tie/desk microphone and loop cable

PDA102R PDA102 50m2 Small room loop kit (omni-directional plated mic. version) £135.10c/w PDA102 free-standing loop amplifier, APM plated microphone and loop cable

PDA102S PDA102 50m2 TV lounge loop kit £120.10c/w PDA102 free-standing loop amplifier, Scart lead and APL connection plate and loop cable

50m2 INDUCTION LOOP AMPLIFIERS & KITS

PDA200E PDA200E 120m2 wall-mounting induction loop amplifier £177.00AKM1 PDA200E 120m2 Meeting/seminar room loop kit £213.45

c/w PDA200E amplifier, APM omni-directional mic plate

AKL1 PDA200E 120m2 Lecture room loop kit £278.38c/w PDA200E amplifier, AMT tie/desk mic, AML lectern mic, 2 x APJ plate

AKT1 PDA200E 120m2 TV / music lounge loop kit £267.47c/w PDA200E amplifier, AMH handheld mic, APS scart lead, APJ plate, APL plate

AKR1 PDA200E 120m2 Waiting room loop kit c/w PDA200E amplifier, APL plate £213.45AKU1 PDA200E 120m2 Retail unit loop kit £238.45

c/w PDA200E amplifier, AML lectern mic, APJ plate

AKW1 PDA200E 120m2 Place of worship loop kit 1 £274.90c/w PDA200E amplifier, AML lectern mic, APJ plate, APL plate

AKW2/L PDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version) £500.60c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, 2 x APXM plate

AKW2/H PDA200E 120m2 Place of worship loop kit 2 (handheld mic. version) £500.60c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, 2 x APXM plate

AKH1/L PDA200E 120m2 Health and fitness club loop kit (lavalier mic. version) £464.15c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, APL plate

AKH1/H PDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £464.15c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, APL plate

Please note: Loop cable is not included in the above ‘AK’ range kits. We recommend you use 1mm2 single core cable such as C-TEC’s LOOP2/W cable which is available in 100m reels (see overleaf for pricing details).

120m2 INDUCTION LOOP AMPLIFIERS & KITS

PDA200/2 200m2 free standing induction loop amplifier £288.69



PDA/RM 19” rack mount kit for PDA Pro-Range amplifier £25.00

PDA/WM Wall mount kit for PDA Pro-Range amplifier £20.05

PRO-RANGE (200m2 to 900m2) INDUCTION LOOP AMPLIFIERS

ML1 Mini 20m2 wall-mounting double gang induction loop amplifier £53.00

20m2 MINI INDUCTION LOOP AMPLIFIER

PL1/K1 Portable induction loop kit (supplied in a cardboard storage/carry case) £120.00Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.

PL1/K2 Portable induction loop kit with AFILS tester (supplied in a cardboard storage/carry case) £207.65Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker, AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.

PL1/K3 Portable induction loop kit (supplied in a robust plastic storage/carry case) £170.30Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.

PL1/K4 Portable induction loop kit with AFILS tester (supplied in a robust plastic storage/carry case) £248.65Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker, AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.

PL1/BATT Replacement battery for PL1 amplifier £12.35TEAR-P Spare ‘AFILS available’ sticker £1.00

PORTABLE INDUCTION LOOP KITS (approx. 1.2m2 coverage)

VL1/B1 12V vehicle induction loop kit £145.83Includes VL1 mini-12V amplifier, AL8 cigarette lighter power connector, TX2 loop, AMT mic.

VL1/B2 24V vehicle induction loop kit £229.16Includes VL1 mini-12V amplifier, AL7 power lead, 24V to 12V DC convertor, TX2 loop, AMT mic.

VEHICLE INDUCTION LOOP AMPLIFIER KITS (approx. 1.2m2 coverage)

NEW

NEW

page 26

INDUCTION LOOP EQUIPMENT

APM Omni-directional plated microphone, for wall/ceiling/desk mounting £36.45For direct connection to ML1, PDA102, PDA200E, PDA Pro-Range or an outreach chain

AMT Tie/desk microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £3.48

AMH Handheld microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £14.00

AML Lectern microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £30.95

AMLS Lectern microphone (short stemmed version of AML) £30.95

AMD Desktop microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate £43.33

AMDS Desktop microphone (short stemmed version of AMD) £43.33

AMD/P Desktop microphone, push to talk £120.43

AMP Professional handheld mic. for PDA200E or APXM outreach plate, requires AXLR lead £138.25

AMR/LA Lavalier radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

AMR/LB Lavalier radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

AMR/LC Lavalier radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

AMR/HA Handheld radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

AMR/HB Handheld radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

AMR/HC Handheld radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate £214.25

PRO45 Hanging ambient microphone for PDA Pro-Range or APXM plate £188.80

PDA RANGE MICROPHONES

RXTI2 Induction loop test receiver requires 2 x AAA batteries & walkman type headphones £58.79SWGN Sine wave generator requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead £61.90AHHM FoSmeter magnetic field strength meter - requires 1 x PP3 battery £92.86AMSW FoSmeter+ combined sine wave generator & magnetic field strength meter £108.00

requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead

AHHM/H FoSmeter H combined magnetic field strength meter & loop listener £70.00requires 1 x PP3 battery & 32Ω headphones such as C-TEC’s HEAD1 headphones

HEAD1 32 ohm headphones for use with AHHM/H £22.20AL1 3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate) £7.50AL2 3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50) £7.50AL3 3.5mm jack to pre-cut bare ended lead £7.50

INDUCTION LOOP TEST EQUIPMENT

Loop cable is included in all ML1/K, DL50/K and PDA102 range induction loop kits. For PDA200E/AK Rangekits we recommend LOOP2/W cable. For other PDA range loop amplifiers, call our technical dept. for advice.

LOOP1/W 100m x 0.5mm2 single core white loop cable (for black cable order LOOP1/B) £21.67LOOP2/W 100m x 1.0mm2 single core white loop cable (for black cable order LOOP2/B) £35.40LOOP3/W 100m x 1.5mm2 single core white loop cable (for black cable order LOOP3/B) £50.55LOOP4/W 100m x 2.5mm2 single core white loop cable (for black cable order LOOP4/B) £83.77FLAT1005 100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets) £71.81FLAT2005 100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets) £88.81FLAT3005 100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets) £105.81TAPE 50m white synthetic fibre tape (used to protect flat loop cable) £9.48BELDEN/10 10m Belden 8723 four core screened cable for use with outreach plates £17.33BELDEN/25 25m Belden 8723 four core screened cable for use with outreach plates £43.33APT Loop connector plate (for the termination of induction loop cable) £36.45AXLR XLR to XLR lead (used to connect AMP mic to APXM outreach plate) £12.15LEST 100V line (i.e PA system output) to 0db (775mV line level) convertor £25.49APPS Overspill reduction phase shifter £84.19TEAR10 Pack of 10 self-adhesive ‘induction loop fitted’ stickers £9.11

INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES

CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM** ML1, PDA102, PDA200E and PDA Pro-Range amplifiers all have Outreach connection sockets. A separate 12V PSU may be required when connecting outreach plates to other amplifiers. Plates should be wired using Belden 8723 audio cable.

APJ 3.5mm mono jack plate, for connection of AMT, AMH, AML or AMD microphones £36.45

APL Line level audio plate, for connection of APS SCART lead/other line level audio feeds £36.45

APQM 6.35mm stereo jack plate, for connection of AMR/L & AMR/H radio microphone kit £36.45

APQL 6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc £36.45

APXM XLR mic level plate, for connection of AMP microphone £36.45

APXL XLR line level plate, for connection of line level feeds from mixing desks, etc £36.45

APM Omni-directional plated microphone, for wall/ceiling/desk mounting £36.45

APXO 3 pin XLR balanced line output plate, connects an Outreach chain to 3rd-party equipment £56.00

API AFILS active indicator light £36.45

APS SCART to double phono lead (for use with APL plate) £3.57

PDA RANGE OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM

NEW

NEW

page 27

INFRARED ASSISTIVE LISTENING SYSTEMS



INFRARED ASSISTIVE LISTENING SYSTEMS

SI30 0.5W modulator/radiator, 2.3/2.8MHz £277.30Mono/stereo operation, coverage 80m2 mono, 40m2 stereo Requires NT20-1-UK or NT20-4-UK PSU

SZI30 Slave 0.5W radiator £199.72Coverage 80m2 mono, 40m2 stereo; daisychain to SI30 to increase coverage Requires NT20-1-UK or NT20-4-UK PSU

NT20-1-UK 24VDC/200mA Plug in mains PSU for one SI30 or SZI30 £93.45

NT20-4-UK 24VDC/500mA Plug in mains PSU for up to four SI30/SZI30s (needs KKY20-015) £186.87

KKY20-015 4 way ‘octupus’ cable for use with NT20-4-UK £32.50

SZI1015-T 2W radiator/modulator, 2.3MHz £1109.12Mono only, coverage 400m2, requires NT1015 PSU.

SZI1015 2W slave radiator £1008.87Mono only, coverage 400m2, daisychain to SZI1015-T to increase coverageRequires NT1015 PSU

NT1015 Mains PSU for one SZI1015-T or SZI1015 £203.15

MODULATORS / RADIATORS

GZG1029 Swivel joint for mounting SI30 or SZI1015-T £105.82

GZP10 Mounting plate for wall or ceiling mounting SI30, SZI30, SZI1015-T or SZI1015 £52.82

IZM20 Cluster mounting kit for up to 4 rotatable SI30/SZI30s £32.50Each SI30/SZI30 will require a IZK20 mounting clamp

IZK20 Mounting clip for SI30 / SZI30 £18.30

KR20-015 0.15m IR extension cable for SI30 / SZI30 when used with IZM20 £14.223.5mm mono jack to 3.5mm mono jack

KR20-7 7m IR extension cable for SI30/SZI30 £26.403.5mm mono jack to 3.5mm mono jack

ATTACHMENTS / CABLES FOR MODULATORS & RADIATORS

RI150/L Infrared receiver with neck induction loop for hard of hearing, mono £164.05c/w BA151 rechargeable accupack

RI150 Stethoset infrared receiver for able hearing, mono £123.05c/w BA151 rechargeable accupack

HDI302 Professional Stethoset receiver for able hearing, mono or stereo £174.21c/w BA151 rechargeable accupack

BA151 Spare Rechargeable accupack for RI150/L, RI150, HDI302 £17.16

L151-10 Charger for up to 10 receivers (RI150/L, RI150, HDI302), needs NT92-UK PSU £334.87

NT92-UK 200mA plug-in mains PSU for L151-10 charger £58.92

RECEIVERS

• Ideal for use in areas where the installation of an audio-frequency induction loop system is impractical

• Modulators/radiators transmit sound via invisible light beams to one or more infrared receivers

• ‘Line of sight’ operation means no ‘spillover’ of the sound signal into neighbouring rooms

• Ideal for persons with mild or moderate hearing loss

• Special RI150/L ‘neck loop’ receiver converts the infrared signal into a mini-induction loop field that can be picked up by any hearing aid with a telecoil / ‘T’ position

• Receivers also available for use by the non-hearing impaired

MM1002 Six input mixing console £122.57

AL4 1/4” jack to XLR lead £37.14

PRO45 Hanging ambient microphone £188.80

MIXERS & MICROPHONES

DDA80 Infrared AFILS kit, 80m2 £2100.00Includes: SI30 Modulator/radiator; NT 20-1-UK Power supply for SI30; KM 23200 Table Stand; IZK20 Clamp for SI30; ME 34 Cardioid mic capsule; MZH 3015 Gooseneck 15 cm; KM 29376 Table stand mic; L151-10 10 way charger; NT92 Power supply for L151-10; RI150 Mono receiver; RI150L Mono loop receiver; Carry case; Mic input modification (12V phantom power); Auto shut off modification; Mic & line input cables supplied

DDA400 Infrared AFILS kit, 400m2 £3314.00Includes: SZI1015T Modulator/radiator; NT1015 Power supply for SZI1015; KM23200 Table Stand; IZK20 Clamp for SI30; ME34 Cardioid mic capsule; MZH3015 Gooseneck 15 cm; KM29376Table stand mic; L151-10 10 way charger; NT92 Power supply for L151-10; 3 x RI150 Mono receivers; 3 x RI150L Mono loop receivers; Carry case; DC modification, SZI & PSU; Mic input modification (12V phantom power); Auto shut off modification; Mic & line input cables supplied

INFRARED ASSISTIVE LISTENING AFILS KITS

NEW

NEW

page 28

POWER SUPPLIES



NC930 12V 250mA double gang PSU (requires back box) £50.00

NC925B1 12V 1A boxed PSU with fault indication £55.24

NC925B1E 12V 1A boxed PSU with no fault indication £51.37

NC925B3 12V 3A boxed PSU £127.66

NON-EN54 12V POWER SUPPLIES

POWER SUPPLIES

NON-EN54 24V POWER SUPPLIES & ANCILLARIES

BF375P 24V 250mA unregulated door release PSU, supplied on a double gang plate £41.33BF375PK 24V 250mA unregulated door release PSU kit £82.00

Includes one BF375P and one BF345/1H electromagnetic door retainer

BF375M 24V 1A regulated general purpose boxed PSU £77.96

BF377 24V 2A unregulated door release boxed PSU £66.21

BF368EN 24 3A regulated boxed PSU to EN54-4 £175.00

BF375PE 24V 250mA unregulated double gang door release psu c/w detector circuit £46.35BF375PEK 24V 250mA double gang automatic door release system £186.15

Includes 1 x BF375PE double gang door release psu c/w detector circuit, 2 x Apollo optical detectors /bases; 1 x door retainer; 1 x NCP-10 flush back box

TRAINING SESSIONS & CPD SEMINARS

CPD-RRO UK Fire Safety Laws - 1 hour FOC*

CPD-VA A Guide to BS 5839-8 Voice Alarm System Design - 1 hour FOC*

CPD-DDA Hearing Assistance Solutions: The Route to DDA Compliance - 1 hour FOC*

CPD-EVC Emergency Voice Communication Systems for disabled refuge, FOC*fire telephone and stadium marshal applications - 1 hour

CPD (CONTINUING PROFESSIONAL DEVELOPMENT) CERTIFIED SEMINARS

• A range of product-based training sessions and CPD approved seminars

• *Free-of-charge to qualifying customers

• Contact our sales desk for session/seminar overviews and bookinginformation.

PDA-TRAIN The PDA Range of Audio Frequency Induction Loop Systems - 3/4 hours FOC*

XFP-TRAIN XFP/AFP Analogue Addressable Fire Panels FOC*(with a brief overview of the CFP conventional fire panel) - 3/4 hours

QT-TRAIN The Quantec Addressable Call System - 3/4 hours FOC*

VA-TRAIN Voice Alarm System Sales, Design & Installation FOC*(focusing on our AVAC and Integrity Voice Alarm Systems) - 2/3 hours

EP-TRAIN The EP203 Automatic Extinguisher Panel - 2/3 hours FOC*

PRODUCT-BASED TRAINING SESSIONS

• Includes a new range of cost-effective EN54-4 compliant regulated switch-mode power supplies

• Optional STU mounting plate (for auto-dial applications) available for 12V 2A and 24V 1.5A EN54-4 versions

• All EN54 (2006) models offer low current consumption, a single pole volt-free fault relay and link-selectable battery charging capacity (1 to 3.5Ahr or 3.5-12Ahr)

• EN54 power supplies with a higher battery charging capacity (up to 80% of the total PSU output) available to special order - contact our Sales Desk for details

• Non-EN54 compliant 12 & 24V PSUs also available

BF360-12 12V 2A EN54-4 Boxed PSU (supplied in a plastic enclosure) £138.08

BF360SP Optional STU mounting plate for BF360-12 2A PSU £14.28

BF360-12/C 12V 2A EN54-4 Power Supply Chassis ONLY £65.00

BF360-24 24V 1.5A EN54-4 Boxed PSU (supplied in a plastic enclosure) £150.00

BF360-24/C 24V 1.5A EN54-4 Power Supply Chassis ONLY £81.00







EN54-4 12V & 24V POWER SUPPLIES & ANCILLARIES (TO EN54-4:1997/A2:2006)

NEW

NEW

Date post:	01-May-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

**2005 PRICE A4 singles AG - Solid State Security · This price list applies to all orders placed...

Documents