2008 anna university syllabus

SEMESTER – I

I Year B.E. / B.Tech.

GE 2115 COMPUTER PRACTICE LABORATORY – I

Requirements for a batch of 30 students

S.No. Description of Equipment Quantity required

Quantity available

Deficiency %

Hardware

1. LAN system with 33 nodes (OR) stand alone PCs 33 Nos.

2. Printer 3 Nos.

Software

1. Operating System Windows / Unix Clone

Available / Not Available

2. Compiler C compiler Available / Not Available

3. Application package Office suite Available / Not Available

SEMESTER – I

I Year B.E./ B.Tech.

GE 2116 Engineering Practices Laboratory


Sl.No. Description of Equipment Quantity required

Quantity available

Deficiency %

CIVIL

1.

Assorted components for plumbing consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions, elbows, plugs and other fittings.

15 sets

2. Carpentry vice (fitted to work bench) 15 No.

3. Standard woodworking tools 15 sets

4. Models of industrial trusses, door joints, furniture joints 5 each

5.

Power Tools: (a) Rotary Hammer (b) Demolition Hammer (c) Circular Saw (d) Planer (e) Hand Drilling Machine (f) Jigsaw

2 Nos 2 Nos 2 Nos 2 Nos 2 Nos 2 Nos

MECHANICAL

1. Arc welding transformer with cables and holders 5 No.

2. Welding booth with exhaust facility 5 No.

3. Welding accessories like welding shield, chipping hammer, wire brush, etc. 5 sets

4. Oxygen and acetylene gas cylinders, blow pipe and other welding outfit. 2 No.

5. Centre lathe 2 No.

6. Hearth furnace, anvil and smithy tools 2 sets

7. Moulding table, foundry tools 2 sets

8. Power Tool: Angle Grinder 2 Nos

9. Study-purpose items: centrifugal pump, air-conditioner One Each.

ELECTRICAL

1. Assorted electrical components for house wiring 15 sets

2. Electrical measuring instruments 10 sets

3. Study purpose items: Iron box, fan and regulator, emergency lamp One each

4. Megger (250V/500V) 1 No.

5. Power Tools:

(a) Range Finder (b) Digital Live-wire detector

2 Nos 2 Nos

ELECTRONICS

1. Soldering guns 10 No.

2. Assorted electronic components for making circuits 50 No.

3. Small PCBs 10 No.

4. Multi Meters 10 No.

5. Study purpose items: Telephone, FM radio, low-voltage power supply 2 each

SEMESTER – I


PHYSICS & CHEMISTRY LABORATORY - I


Physics Laboratory


Quantity available Deficiency %

1. Lees’ disc apparatus (With accessories) 5 Nos.

2. Air Wedge apparatus (With traveling microscopes and accessories)

5 Nos.

3. Spectrometer (With grating, prism and accessories) 5 Nos.

4.

Diode laser (2 mW power) or He-Ne laser (2mW) (Lycopodium powder, Optical fibre Kit and accessories)

5 Nos.

5. Ultrasonic interferometer (With accessories) 5 Nos.

6. B-H Curve traces apparatus 5 Nos.

Chemistry Laboratory


Quantity available

Deficiency %

1. Electronic balance 1 No.

2. pH meter 8 Nos.

3. Conductivity bridge 8 Nos.

4. Potentiometer 8 Nos.

5. Platinum electrodes 8 Nos.

6. Calomel electrodes 8 Nos.

7. Spectrophotometer 1 No.

8. Flame photometer 1 No.

9. Oswald viscometer 15 Nos.

10. Glassware Sufficient Quantity

SEMESTER – II


GE2155 COMPUTER PRACTICE LABORATORY - II



Quantity available

Deficiency %

Hardware

1. UNIX Clone Server 1 No.

2. 33 Nodes (thin client or PCs) 33 Nos.

3. Printer 3 Nos.

Software

4. Operating System (33 user license or License free Linux) Unix Clone Available /

Not Available

5. Compiler C compiler Available / Not Available

SEMESTER – II


GS2165 PHYSICS & CHEMISTRY LABORATORY - II


Physics Laboratory



1. Torsional Pendulum apparatus (With accessories) 5 Nos.

2. Non-uniform Bending apparatus (With accessories) 5 Nos.

3. Viscosity (Poiseuille’s flow) apparatus (With accessories) 5 Nos.

4. Band gap apparatus/ Post office box 5 Nos.

5. Spectrometer (With grating, prism and accessories) 5 Nos.

6. Carey Foster Bridge 5 Nos.

Chemistry Laboratory


Quantity available

Deficiency %

1. Electronic balance 1 No.

2. pH meter 8 Nos.

3. Conductivity bridge 8 Nos.

4. Potentiometer 8 Nos.

5. Platinum electrodes 8 Nos.

6. Calomel electrodes 8 Nos.

7. Spectrophotometer 1 No.

8. Flame photometer 1 No.

9. Oswald viscometer 15 Nos.

10. Glassware Sufficient Quantity

SEMESTER – II

I Year B.E. /B.Tech.

EE 2155 Electrical Circuits Laboratory

Requirement for a batch of 30 students

Sl. No.

Name of the Equipment Range / Spec Quantity

required Quantity available

Deficiency %

1. C.R.O 30MHZ 6

2. D.C, Power Supply (regulated)

0-30 V 6

3. Function Generator

Frequency: 1 MHZ

Amplitude: Max volt:

20V

Min volt:

20mV

Waveforms: Sine,

Square,

triangular

6

4. Digital Storage Oscilloscope - 1

SEMESTER – III

Faculty of Electrical Engineering

B.E. – Electronics and Instrumentation Engineering

EE 2207 Electronic Devices and Circuits Laboratory


S.No. Description of Equipment

Quantity required

Quantity available

Deficiency %

1. Regulated Power Supply 15

2. Dual Tree CRO (20 MHz) 15

3. Function Generator 15

4. 31/2 Digit digital multimeter 10

5. Bread Boards 40

6. Transistor 25 Nos.

7. JFET 10 Nos.

8. Diode 10 Nos.

9. Zener Diode 5 Nos.

10. UJT 5 Nos.

11. Photo Diode 5 Nos.

12. Photo Transistor 5 Nos.

13. Thermistors 5 Nos.

14. OP-amp 10 Nos.

15. Milli Ammeter (0-100mA) 15 Nos.

16. Micro Ammeter (0-50μA) 10 Nos.

17. Low range voltmeter (0-30V) 10 Nos.

18. Resistor of various ranges 50 Nos.

19. Capacitors of various ranges 50 Nos.

20. Connecting wires Sufficient Nos

SEMESTER – III



EE 2209 Data Structures and Algorithms Laboratory



Quantity available

Deficiency %

1. Computer(Pentium 4) 40 Nos with one server

2. Dot matrix printer 3 Nos

3. Laser Printer 2 Nos

4. UPS (5 KVA) 2

5. Turbo C 40 Nodes

SEMESTER – III



EI 2208 Electrical Machines Laboratory


S.No. Description of Equipment

Quantity required

Quantity available

Deficiency %

6. D.C motor – Generator set D.C motor – Shunt Generator D.C motor – Compound Generator

2 set 2 set

7. D.C. Shunt Motor 2 Nos.

8. D.C. Series Motor 1 No.

9. D.C. Compound Motor 1 No.

10. Single phase transformers 7 Nos.

11. Three phase transformers 2 Nos.

12. D.C. Motor – Alternator set 4 sets

13. Three phase Induction Motor (Squirrel cage)

3 Nos.

14. Three phase slip ring Induction Motor 1 No.

15. Single phase Induction Motor 2 Nos.

16. Resistive load 3 phase – 2 , single phase - 3

5 Nos.

17. Inductive load 1 No.

18. Single phase Auto transformer 5 Nos.

19. Three phase Auto transformer 3 Nos.

20. Moving Coil Ammeter of different ranges

20 Nos.

21. Moving Coil Voltmeter of different ranges

20 Nos.

22. Moving Iron Ammeter of different ranges

20 Nos.

23. Moving Iron voltmeter of different ranges

20 Nos.

24. Wire wound Rheostats of different ratings

30 Nos.

25. Tachometers 10 Nos.

26. Single element wattmeters of different ranges UPF / LPF

20 Nos.

27. Double element wattmeters of different ranges

4 Nos.

28. Power factor meter 2 Nos.

29. Digital multimeter 5 Nos.

30. Three point starter, four point starter,DOL starter, manual star / delta starter, semi automatic and fully automatic star / delta starter

1 No each for study experiment

31. SCR based semi and fully controlled rectifier module

2 Nos.

32. SCR based chopper module 2 Nos.

33. SCR based inverter module 2 Nos.

34. SCR based AC voltage regulation module

2 Nos.

35. SCR, MOSFET, IGBT Trainer module Each 2 Nos.

SEMESTER – IV

Faculty of Electrical Engineering B.E. – Electrical and Electronics Engineering

EI 2257 Transducers and Measurements Laboratory



Quantity available

Deficiency %

Loading Effect on potentiometer 1. Potentiometer – Linear displacement transducer kit 1 No 2. Regulated power supply 1 No 3. FET voltmeter, ordinary voltmeter 1 No

Characteristics of Strain Guage and Load cell 4. Strain guage and Load cell kit 1 No 5. Variable power supply 1 No 6. Loads for measurement A set

Characteristics of LVDT 7. LVDT trainer kit 1 No. 8. Power supply 1 No.

Half Effect Transducers 9. Hall effect characteristics trainer 1 No. 10. Power supply 1 No. 11. Voltmeter 1 No.

Photoelectric tachometer 12. Speed control trainer kit 1 No 13. Power supply 1 No. 14. Wires Some 15. Multimeter 1 No.

Characteristics of LDR 16. Photo conductive trainer kit 1 No. 17. Multimeter 1 No. 18. Connecting wires 1 No.

Characteristics of thermistor 19. Thermistor Trainer kit 1 No. 20. Heater 1 No. 21. Thermistor 1 No. 22. Thermometer 1 No. 23. Voltmeter 1 No.

Characteristics of Thermocouple 24. Thermocouple trainer kit 1 No. 25. Thermocouple 1 No. 26. Heater 1 No.

27. Voltmeter 1 No.

Step Response characteristics of RTD and Thermocouple 28. Thermocouple and RTD trainer kit 1 No. 29. Thermocouple and RTD sensors 1 No. 30. Thermometer 1 No. 31. Heater 1 No. 32. Voltmeter 1 No. 33. I/P trainer kit 1 No. 34. Pressure source 1 No. 35. Control valve etc 1 No.

Measurement Of Medium Resistance Using a) Wheatstone’s Bridge 36. Resistors 1 No. 37. Galvanometer 1 No. 38. Regulated Power Supply 1 No. 39. Bread Board 1 No. 40. Decade Resistance Box 1 No. 41. Multimeter 1 No.

b) Kelvin’s Double Bridge 42. Power supply 1 No. 43. Fixed resistance 1 No. 44. Unknown resistance 1 No. 45. Decade Resistance box 1 No. 46. Multimeter 1 No. 47. Galvanometer 1 No. 48. Bread Board 1 No.

Schering’s Bridge for capacitance measurement 49. Resistors Some set 50. Capacitance Some set 51. Decade Resistance box 1 No. 52. Decade Capacitance Box 1 No. 53. CRO 1 No. 54. Function Generator 1 No.

Anderson’s Bridge for inductance measurement. 55. Resistors Some Set 56. Decade Inductance box 1 No. 57. Decade Condenser box 1 No. 58. Regulated Power Supply 1 No. 59. CRO 1 No. 60. Bread Board 1 No.

Calibration of Single Phase Energy Meter 61. Wattmeter 2 No. 62. Voltmeter 1 No. 63. Ammeter 1 No. 64. Resistive Load 1 No.

Calibration of wattmeter

65. Ammeter 1 No. 66. Voltmeter 1 No. 67. Wattmeter 1 No. 68. Load 1 No.

Calibration of Ammeter 69. Standard Ammeter 1 No. 70. Ammeter 1 No. 71. Variable resistive load 1 No. 72. RPS 1 No.

Calibration of Voltmeter 73. Standard Voltmeter 1 No. 74. Voltmeter 1 No. 75. Auto transformer 1 No. 76. RPS 1 No.

Series type Ohmmeters 77. Ohmmeter (Analog Multimeter) 1 No. 78. Voltmeter 1 No. 79. Ammeter 1 No. 80. Resistor 1 No. 81. RPS 1 No.

Shunt type Ohmmeter 82. Ohmmeter (Analog Multimeter) 1 No. 83. Voltmeter 1 No. 84. Ammeter 1 No. 85. Resistor 1 No. 86. RPS 1 No.

SEMESTER – IV



EI 2258 Thermodynamics Laboratory



Quantity available

Deficiency %

Thermodynamics Lab 87. Engine – cut section models 1 set

88. Single cylinder petrol engine with Mechanical dynamometer

1 set

89. Multi cylinder petrol engine with hydraulic dynamometer

1 set

90. Multi cylinder diesel engine with Electrical dynamometer

1 set

91. Steam boilers with suitable mountings and accessories

1 set

92. Refrigeration Test Rig 1 No.

93. Forced convection Heat transfer Test set up.

1 No.

94. Free convection Heat transfer test set up. 1 No.

95. Apparatus for measuring pipe friction 1 No.

96. Francis turbine 1 No.

97. Pelton wheel 1 No.

98. Turgo impulse wheel 1 No.

99. Stop watches 6 Nos.

SEMESTER – IV



EE 2258 Linear and Integrated Circuits Laboratory


\S.No. Description of Equipment Quantity required

Quantity available

Deficiency %

1. Interface such as, A/D, D/A converter, DMA, PIC Serial, Interface, Temperatures controller, Stepper motor, Key board

4 each

2. CRO and function generator 3 each

3. IC trainer Kit 15

4. Analog AC trainer kit 4

5. Components and bread boards 10 each

6. Chips IC – 7400 10

7. Chips IC – 7402 10

8. Chips IC – 7408 10

9. Chips IC – 7432 10

10. Chips IC – 7410 25

11. Chips IC – 555 10

12. Chips IC – 741 10

13. Chips IC – 74153 10

14. Chips IC – 7474 10

15. Chips IC – 7490 10

16. Chips IC – 7447 10

17. Chips IC – 7476 10

18. Chips IC – 7420 10

19. Chips IC – 7404 15

20. Chips LM – 317 10

21. Chips LM – 723 10

22. Chips MA – 7840 10

23. Chips LM – 380 10

24. Chips ICL - 8038 10

25. Traffic light control kit 2

26. VDU 2

27. 7 segment Display 5

28. Interfacing card such as keyboard etc. 3 each

29. Work tables 15

SEMESTER – V


B. E. – Electronics and Instrumentation Engineering

EC 2313 – Microprocessor and Microcontroller Laboratory


Sl. No. Description of Equipment Quantity

required Quantity available

Deficiency %

1. 8085 Microprocessor Trainer with Power supply 10

2. 8051 Micro controller Trainer Kit with power supply 10

3. 8255 Interface board 5



6. 8279 Keyboard/Display Interface Board 5

7. 8253 timer counter 5

8. ADC and DAC card 5 each

9. Stepper motor with Controller 1

10. Traffic Light Control System 1

11. Regulation power supply 1

12. Universal ADD-ON modules 3

13. 8 Digit Multiplexed Display Card 2

14. Function Generator 3

15. Multimeter 3

16. C Compliers 2

17. KEIL or RIDE software 2 license

18. 8051 Microcontroller trainer kit with flash memory 2

19. AT89C51 Microcontroller Kit 2

SEMESTER – V


B.E. - Electronics and Instrumentation Engineering (R 2008) CS 2312 Object Oriented Programming Laboratory

(Requirement for a batch of 25 students)

Sl. No. Description of Equipment Quantity

Required Quantity Available

Deficiency in %

Hardware Required

1. Computers (Pentium-4) 40 Nos with one server

2. Dot matrix printer 3 Nos

3. Laser Printer 2 Nos.

4. UPS (5 KVA) 2

Software Required

5. Turbo C++ 40 Nodes

6. (Java 2 SDK) JDK 5.0 update 6 (1.5.0 - Internal Version No.)

40 Nos.

SEMESTER – V


B. E. – Electronics and Instrumentation Engineering (R 2008)

EI 2304 Industrial Instrumentation Laboratory



Quantity available

Deficiency %

Discharge coefficient of orifice plate

1. Orifice meter 1 No.

2. Stopwatch 1 No.

Calibration of Pressure Gauge

3. Dead weight tester 1 No.

4. Pressure gauge and standard weight 1 No.

Torque Measurement

5. Strain gauge torsion meter 1 No.

6. Dead weight 1 No.

Measurement of Viscosity Using Saybolt Viscometer

7. Thermometer 1 No.

8. Stop watch 1 No.

9. 60ml flask 1 No.

10. Water 1 No.

Vacuum pressure measurement

11. Vacuum pressure setup 1

12. Vacuum pressure transmitter 1

13. Voltmeter 1


Quantity available

Deficiency %

Level Measurement Using DPT

14. DPT 1 No.

15. Container 1 No.

UV-Visible Spectrophotometer

16. UV spectrophotometer 1 No.

17. Cuvettes

IR – Spectrophotometer

18. IR spectrophotometer sl-117 1

19. Cuvette 1

20. Solution Adequate

21. Printer 1

pH – Meter Measurement of pH - value of Test Solutions

22. pH meter 1 No.

23. Test solutions Few types

24. Beaker 2 Nos.

25. Stand 1 No.

Measurements of conductivity of test solutions.

26. Solution under test. Adequate

27. Conductivity electrode Adequate

28. Conductivity meter setup with display. Adequate

SEMESTER – V

Faculty of Electrical Engineering B.E. Electronics and Instrumentation Engineering (R 2008)

GE2321 Communication Skills Laboratory




Server o PIV system o 1 GB RAM / 40 GB HDD o OS: Win 2000 server o Audio card with headphones (with

mike)

1.

o JRE 1.3

1 No.

Client Systems

o PIII or above o 256 or 512 MB RAM / 40 GB

HDD o OS: Win 2000 o Audio card with headphones (with

mike)

2.

o JRE 1.3

60 No.

Softwares a) Interactive Teacher Control Software Available / Not Available b) English Language Lab Software Available / Not Available

3.

c) Career Lab software Available / Not Available 4. Handicam Video Camera (with video lights

and mic input) 1 No.

5. Television - 29” 1 No. 6. Collar mike 1 No. 7. Cordless mikes 1 No. 8. Audio Mixer 1 No. 9. DVD Recorder / Player 1 No.

10. LCD Projector with MP3 /CD /DVD provision for audio / video facility - Desirable 1 No. Available / Not Available

SEMESTER – VI


B. E. – Electrical and Electronics Engineering (R 2008)

EI 2355 Communication and DSP Laboratory

Details will be given later

SEMESTER – VI


B. E. – Electrical and Electronics Engineering (R 2008)

EI 2356 – Process Control System Laboratory



Quantity available

Deficiency %

1. Two tank system with provision for

making them as interfacing and non- interfacing. Level transmitters Recorder

1 No

1 No 1 No

2. Two tank system with provision for transportation delay (Non – interacting process)

Level transmitter

Recorder

1 No

1 No

1 No

3. Electronic PID controller Source for generating step and ramp inputs Recorder Digital Multimeter

1 No

1 No

1 No

4. Control valve trainer (with position for varying ΔP across the valve) Flowmeter

1 No

1 No

5. Flow process station with all accessories

Analog / Digital PID controller

Recorder

1 No

1 No

1 No

6. Level process station with all accessories Analog / Digital PID controller Recorder

1 No

1 No

1 No


Quantity available

Deficiency %

7. Temperature process station with all

accessories Analog / Digital PID controller Recorder

1 No

1 No

1 No

8. Pressure process station with all accessories Analog / Digital PID controller Recorder

1 No

1 No

1 No

9. Process control trainer / real time process (level / thermal process) Recorder PID controller

1 No

1 No

1 No

10. Cascade control system with flow as inner variable and liquid level as outer Variable with following accessories.

Level transmitter

Flow transmitter

Control valve

Analog / Digital PID controller Recorder

1 No

1 No

1 No

1 No

1 No

SEMESTER – VI



EI 2357 Virtual Instrumentation Laboratory



Quantity available

Deficiency %

1. Lab View Software 5 License (Minimum)

2. DAQ Card (USB or PCI based) 4

3. Temperature Process setup 1

4. Any Sequential Process set up (for PLC Application) 1

5. CRO 1

6. DC Power Supply 4

7. Multimeter 2

8. V/I, I/V Converter 1 each

SEMESTER – VII



EI 2405 VLSI Laboratory


Sl.No. Description of Equipment Quantity

Required Quantity Available

Deficiency in %

1.

Software – Simulation, Synthesis, back annotation, place & route Xlinx ISE (latest version)

5 User License

(minimum)

2. Spartan 2E boards 5 Nos.

3. Spartan 3 AN boards 1 No.

4.

Add – on boards 1. Real - time clock 2. 2. Traffic light control 3. 3. LED displays with switches 4. 4. I/O boards

1 No. 1 No. 1 No. 1 No.

5. Multimeter 2 Nos.

SEMESTER – VII



EI 2406 Instrumentation System Design Laboratory

Details will be given later

Date post:	18-Jan-2016
Category:	Documents
Upload:	karthikeyan-jhk
View:	118 times
Download:	1 times

2008 anna university syllabus

Documents