2009 ESSS South American ANSYS Users Conference ESSS South American ANSYS Users Conference uu...

2009 ESSS South American ANSYS Users ConferenceCostão do Santinho Resort & SPA - Florianópolis, SC - Brazil10-13 November 2009

PRElimiNARY PROGRAm

®Sponsors:

Imag

e: C

ourte

sy_N

AVAT

EK_L

TD

accelera�ngresultsTM

®

2009 ESSS South American ANSYS Users Conference

uu WELCOME

Smart Engineering Simulation

Simulation Driven Product Development is increasingly present in the daily life of engineers, designers and researchers. Based on reliable methods of mathematical modeling, ANSYS technologies help these professionals to improve products, optimize processes and reduce development cycles and costs.

The most traditional forum for the exchange of ideas about Structural

Analysis (FEA) and Computational Fluid Dynamics (CFD) in South America will include this year the benefits of using Ansoft tools for Electronic Design Automation (EDA).

Join us at the 2009 ESSS South American ANSYS Users Conference and find out how innovative companies, universities and R&D centers has been using ANSYS software to solve engineering problems.

10-13 NOVEMBER - FLORIANÓPOLIS, SC/BRAZIL

• Walter Rauen de SouzaPresident Ciber Equipamentos Rodoviários Ltda.

• Donizete C. SantosPresident SKF do Brasil

• luiz Carlos largura Jr.

Equipment Engineer CENPES/PETROBRAS

• Arnaldo CamarãoProduct Development Manager ArvinMeritor

• miguel mattar Neto Research and Technology Deputy Manager IPEN-CNEN/SP

• Fernando TosteEquipments Engineering Coordinator Technip

• Paul Galpin Chief Technologist, Fluid Systems ANSYS, Inc.

• markus KoppSenior Application Specialist HF Products ANSYS, Inc.

• Nader Fateh VP Business Development ESTECO NA

• Sriram RamanathanSales Manager, Americas DEM Solutions

uu KEYNOTE SPEAKERS

Inte

rnat

iona

l Spe

aker

s

Tech

nica

l Spe

aker

sM

anag

emen

t Tr

acks


uu NOVEmBER 10

7:30 Registration Open

8:30 ADVANCED TRAiNiNG

10:00 REFRESHmENTS iN EXHiBiTiON AREA


12:00 lUNCH




uu NOVEmBER 11



10:00 PlENARY SESSiON

12:10 lUNCH



16:00 TECHNiCAl SESSiONS

uu NOVEmBER 12

8:00 ADVANCED TRAiNiNG / TECHNiCAl TOPiCS



12:00 lUNCH




uu NOVEmBER 13

8:00 TECHNiCAl TOPiCS



12:10 ClOSiNG lUNCH

uu CONfERENCE AT-A-gLANCE


uu NOVEmBER 10 - PRE-CONFERENCE TRAiNiNG

The Full System EMI/EMC Methodology using Ansoft Tools

Optimization Techniques using modeFRONTIER

Using EDEM for Discrete Element Modeling

ANSYS CFD - Turbomachinery Flow Modeling

ANSYS Mechanical - Advanced Contact and Fasteners

ANSYS APDL Programming - Integrating Workbench and Classic

ANSYS Mechanical Workbench - Rotordynamics

Electromagnetic Analysis of Electromechanical Products using Maxwell

7:30 REGiSTRATiON OPEN


























18:00 END OF 1ST DAY



12:00 lUNCH




uu NOVEmBER 11

Oil & GAS iCarlos Fontes

mARiNE/OFFSHORE iMaira Vargas

iNDUSTRiAl EqUiPmENTS iGiovanni Teixeira

CiVil iAndrés González

ElECTRONiCSMateus Bonadiman

APPliANCESDaniel Boeri

16:00 IMPLEMENTATION OF ThE CRITICAL vELOCITY bOUNDARY CONDITION FOR PARTICLE-WALL INTERACTION IN FLUENT’S DISCRETE PhASE MODELJosé A. S. Gonçalves,UFSCar

EvALUATION OF ThE SUPPORTS OF NEW RISERS DURINg A “PULL-IN” OPERATION IN A FPSORicardo Bittencourt Sampaio, PETROBRAS

MODELINg TEMPERATURE DISTRIbUTION IN FRICTION STIR WELDINg USINg ThE FINITE ELEMENT METhODmauricio Rangel Pacheco, ESSS

bREAkOUT NUMERICAL SIMULATIONVinicios A. de Azevedo, UENF

ThERMAL NUMERICAL SIMULATION IN TELECOMMUNICATION CAbINETAmarildo Tabone Paschoalini, UNESP Ilha Solteira

FLUID FLOW ANALYSIS IN AN ARIMEX hAIR DRIER USINg COMPUTATIONAL FLUID DYNAMICS (CFD)Nazareno mancinelli, Arimex Importadora S.A.

16:20 EXPERIMENTAL AND COMPUTATIONAL MODELINg OF gAS LIqUID ANNULAR FLOW IN hORIzONTAL TUbES lucas de Andrade Kostetzer,ESSS

COMPARISON bETWEEN PROgRESSIvE AND bACkSTEP WELDINg SEqUENCES bY NUMERICAL AND EXPERIMENTAL ANALYSISCarlos A. de Araujo, Marinha do Brasil

NUMERICAL MODELINg FOR MEChANICAL AND ThERMAL ANALYSIS OF RESIDUAL STRESSES FROM ThE WELDINg PROCESSThiago Vidal Valente, UnB

MEChANICAL APPLICATIONS OF ThE DRUCkER-PRAgER CONSTITUTIvE LAWJorge mario Toro Fernandez, IMPSA Wind

ELECTROMAgNETIC ANALYSIS OF SALIENT POLE SYNChRONOUS gENERATOR USINg FINITE ELEMENT METhODDiodomiro Baldomero luque Carcasi, UNICAMP

PC MOUSE REPROJECT USINg qUASISTATIC ANALYSIS IN CAE TOOLSSergio Antonio Rosa, Instituto Superior Tupy

16:40 ON ThE LARgE-EDDY SIMULATION: RECOMENDED PRATICES AND ADvANCED POST-PROCESSINg Raphael Bacchi,ESSS

2D FINITE ELEMENT ANALYSIS OF CAST SEA-bOX hEADS IN A SEMI-SUbMERSIbLE PLATFORMGilson Gomes da Silva, PETROBRAS

ThE IMPROvEMENT OF PRESSURE vESSELS’ DESIgN ThROUgh FEA WITh ThE ANSYS PROgRAM AND ThE STRESS EvALUATION CRITERIA OF ThE ASME CODEAndré Ricardo Beim, Tresca Engenharia

LOAD TEST MODELINg OF LARgE POLESPaulo Alexandre de Oliveira, Instituto de Tecnologia para o Desenvolvimento LACTEC

DEvELOPMENT OF WATER CUT SENSOR FOR TWO PhASE (OIL AND WATER) FLOW IN PIPELINE bY MICROWAvE IN RESONATOR CAvITYEduardo Scussiato, UFSC

PARAMETER IDENTIFICATION OF STRESS-STRAIN CURvES AT CONSTANT RATE ObTAINED FROM AXIAL IMPACT TESTS OF PvC AND PP SAMPLESRafael Beck, WEG

17:00 TEST CASES FOR vARIAbLE DENSITY FLOW Paulo Santochi Pereira da Silva,Poli USP

NON-LINEAR SIMULATION OF ThE UMbILICAL ANChORINg DEvICE USINg COhESIvE zONE MATERIAL bEhAvIOR FOR ThE INTERFACE CONTACT EPOXI/STEEL TUbEJuliano lanza Conceição, SUBSIN

EFFECT OF STRESS CONCENTRATION ON ThE FATIgUE RESISTANCE OF TWO DUAL-PhASE STEELSJuliano de Barros Veloso e lima, UFOP

NUMERICAL MODELINg OF LAbORATORY TESTS WITh ThE ANELASTIC STRAIN RECOvERY METhOD FOR IN-SITU STRESS DETERMINATIONVinicios A. de Azevedo, UENF

SIMULATION OF POWERTRANSFORMERS ANDREACTORS USINgMAXWELLAnderson Santos Nunes, Weg Equipamentos Elétricos S/A

bETTER vISUALIzATION OF hELICOIDAL SPRINgS MODES bY COORDINATES ChANgEJulio Cesar da Silva, EMBRACO

17:20 vORTEX IDENTIFICATION CRITERIA ON TURbULENT FLOWS Raphael Bacchi,ESSS

STRUCTURAL ANALYSIS OF A PEDESTAL SUPPORT OF AN OFFShORE CRANEEdson Carrilho, PETROBRAS

USE OF FINITE ELEMENT METhOD IN ThE STUDY OF NOTCh EFFECT IN ThE FATIgUE LIFE OF PLATE MILL´S SPINDLEluiz Otávio Rocha Peres, USIMINAS

MODAL & SEISMIC ANALYSIS OF A LNg TANkSebastián miranda, Metacontrol Ingenieros S.A.

ThE UTILIzATION OF “LEAST MINIMUM SqUARES” TO SOLvE TRANSIENT PRObLEMSAndré Batista de Almeida, Tyco Electronics

AN IMPLICIT IMPACT ANALYSIS APPROACh IN COMPRESSOR COMPONENTS DESIgNRaul Bosco Junior, EMBRACO

17:40 CAE APPLIED TO RISk ANALYSIS Carlos Eduardo Fontes,ESSS

USINg ANSYS IN ThE DEvELOPMENT OF MILLINg DRIvESRafael Rodarte, SEW EURODRIVE

ANALYTICAL-EXPERIMENTAL COMPARISON OF NUMERICAL DYNAMIC RESPONSE IN PRESSURES OF FLUID80 ELEMENTAndrés González, ESSS

EvALUATION OF EFFECTIvE FLOW AND FORCE AREAS OF REED vALvES USINg STEADY STATE FLUID-STRUCTURE INTERACTIONCelso Kenzo Takemori, EMBRACO


18:00 END OF 2ND DAY


ANSYS Mechanical - Advanced Contact andFasteners

ANSYS APDL Programming - Integrating Workbenchand Classic


Electromagnetic Analysis of ElectromechanicalProducts using Maxwell


10:00 OPENiNG SESSiONClovis Maliska Jr., ESSS

10:10 International Speaker ANSYS CORPORATE UPDADEPaul Galpin, ANSYS, Inc.

11:00 Sponsor mark ihimoyan, Microsoft

11:20 International Speaker THE mAGiC OF mAXWEll’S EqUATiONSmarkus Kopp, ANSYS, Inc.

12:10 lUNCH

13:30 Management Track THE SUCCESS OF SKF BASED ON THE TRiAD TECNOlOGY x PROCESSES x PEOPlEDonizete C. Santos, SKF do Brasil

14:00 Technical Speaker ANSYS SOFTWARE USAGE iN STRUCTURAl iNTEGRiTY ASSESSmENTluiz Carlos largura Jr., CENPES/PETROBRAS

14:30 Technical Speaker THE ENGiNEERiNG KNOWlEDGE mANAGEmENT CHAllENGE iN CAE ANAlYSiSArnaldo Camarão, ArvinMeritor

15:00 International Speaker A mUlTiDiSCiPliNARY APPROACH TO DESiGN OPTimizATiONNader Fateh, ESTECO NA


TECHNiCAl SESSiONS

uu NOVEmBER 12

Oil & GAS iiJoão Aguirre

mARiNE/OFFSHORE iiNicolas Spogis

iNDUSTRiAl EqUiPmENTS iiFabiano Nunes

CiVil ii/AEROSPACECesareo Siqueira

POWER GENERATiON iRodrigo Tasca

ADVANCED TOOlSRoberto Silva

16:00 CFD hELPS OPEN hOLE gRAvEL PACkINg PROJECTS IN ThE OIL INDUSTRY João Vicente martins de magalhães,PETROBRAS

SAIL AERODYNAMICS FOR A hYDROFOIL CATAMARAN bOATRaul Clemente Neto, Poli USP

vALvE CERTIFICATION - FAbRICATION & DESIgN ASPECTS: A PRACTICAL EXAMPLECarlos Alexandre de Jesus miranda, IPEN/Conesteel Válvulas e Conexões Industriais Ltda

PRELIMINARY SIMULATION OF ThE MARACATU ARENAClaudio marques de Almeida Prado, Enerconsult S.A.

ANALYSIS OF WIND TURbINE bLADE USINg 3D CFD AND ITS COMPARISON WITh bEM METhODmauro Grioni, IMPSA

FRACTURE MEChANICS EvALUATION OF A PIPELINE SECTION USINg A COMbINED ANSYS/zENCRACk FINITE ELEMENT ANALYSIS APPROAChmaira Amanda Vargas, ESSS

16:20 SAND SETTLINg ANALYSIS IN A RAT-hOLE DURINg hORIzONTAL WELL gRAvEL PACkINgJairo zago de Souza,ESSS / PETROBRAS

DETERMINATION OF STREAM EFFORTS IN FLOATINg UNITS USINg CFDDaniel Fonseca de Carvalho e Silva, PETROBRAS

FEM APPLIED TO IMPROvE ThE ShAPE OF SLIDE gATE PLATE IN ORDER TO INCREASE PERFORMANCE IN CONTINUOUS CASTINgHerbert A. Dos Santos, Magnesita Refratarios S.A.

ULTIMATE RESISTANCE OF I-gIRDER WEb PANELS SUbJECTED TO COMbINED bENDINg, ShEAR AND PATCh LOADINg Asdrúbal Ayestarán, Albatros Ingeniería

ON ThE PREDICTION OF ADvERSE hYDRAULIC PhENOMENA IN ThE INTAkE OF LARgE-SCALE PUMPS bY CFD SIMULATIONSOtávio Souza Pires, Promon Engenharia / UFRJ

ANSYS EXPLICIT STR AND LS-DYNA, OvERvIEW AND APPLICATIONSivan ivanovitsch Thesi Riagusoff, ESSS

16:40 EvALUATION OF MOMENTUM TRANSFER MODELS FOR EULER-EULER MODELINg OF CONTINUOUS-DISPERSE FLOWS lucilla Coelho de Almeida,ESSS

vISCOUS DRAg DETERMINATION OF A ShIP MODEL AT LOW FROUDE NUMbERSHumberto de Carvalho Nakanishi, Poli USP

bEST PRACTICES FOR DEvELOPMENT AND IMPROvEMENT OF PROJECTS USINg ANSYS TOOL AT CFD AND FEA ANALYSISWagner João da Silva mariano, Ciwal - Acessórios Industriais Ltda

MISSILE NOzzLE COUPLED-FIELD SIMULATIONSGuilherme Pinto Guimarães, Centro Tecnológico do Exército - CTEx

ANALYSIS OF ENERgY CONSUMPTION IN CENTRIFUgAL COMPRESSORS DUE TO ThE MISALIgNMENT OF IMPELLER AND DIFFUSERCarlos Eduardo Reuther de Siqueira, PETROBRAS

ANALYSIS OF COMPOSITE STRUCTURES USINg ANSYS 12.0 AND ThE ANSYS COMPOSITES PREPOST MODULE (ACP): AN OvERvIEWJean Paul Kabche, ESSS

17:00 IMPROvEMENT OF AN OPTICAL OIL AND gREASE MONITORINg DEvICE USINg ThE EULER-LAgRANgE APPROACh Clarissa Bergman Fonte,ESSS

A METhODOLOgY FOR ThE ESTIMATION OF NUMERICAL hYDRODYNAMIC AND ADDED MASS COEFFICIENTS USINg CFD TEChNIqUESlucas Froes Cavalcanti, ESSS

ASSESSMENT OF NUMERICAL MODELS TO REPRESENT ThE LAMINATED ROTOR CORE OF ELECTRICAL MAChINESHideraldo luis V. dos Santos, WEG

MODELINg AND vALIDATION OF ThE RESPONSE OF RIbbED PANELS SUbJECTED TO STRUCTURAL EXCITATION USINg FEMmario Alejandro González montenegro, UFSC

TRANSITION PROCESS bEgINNINg ON A LOW PRESSURE TURbINE bLADERosiane Cristina de lima, VSE

MEChANICAL APDL AND WORkbENCh INTEgRATIONRoberto monteiro Basto da Silva, ESSS

17:20 FLUID DYNAMIC SIMULATION OF A gAS SPARgED FLOTATION TANk Fabio Pereira dos Santos,ESSS

FLUID-STRUCTURAL ANALYSIS IN CIRCULAR TOWERSRenato Bertolino Junior, UNESP

ThE APPLICATION FO bEAM ELEMENTS TO SOLvE CONTACT PRObLEMSmarcos Giovani Dropa de Bortoli, EMBRACO

AERODYNAMIC IMPROvEMENTS IN A AERODESIgN CARRIER bASED AIRCRAFT USINg ANSYS’ COMPUTATIONAL FLUID DYNAMICS TOOLSSinjin Denis machado Yano, Poli USP

COMPUTATIONAL SIMULATION OF ThE PERFORMANCE OF A TRANSONIC AXIAL-FLOW COMPRESSORJian Su, UFRJ

NUMERICAL COUPLINg bETWEEN DEM (DISCRET ELEMENT METhOD) AND FEA (FINITE ELEMENTS ANALYSIS)Daniel Nasato, ESSS

17:40 MODELINg OF A DEMISTER DEvICE FOR gRAvITATIONAL SEPARATOR TANkS João Aguirre Oliveira Jr.,ESSS

A METhODOLOgY FOR A hYDRODYNAMIC ANALYSIS OF A MOONPOOL STRUCTURE WITh MOORINg LINES USINg ThE ANSYS AqWA PRODUCTmaira Vargas, ESSS

ANSYS LS-DYNA PC MODELINg OF CONTACT/IMPACT WITh hIgh AND LOW STIFFNESS MATERIALS IN ThE NUMERICAL SIMULATION OF NUCLEAR TRANSPORTATION PACkAgES UNDER 9 M DROP TESTSmiguel mattar Neto, IPEN – CNEN/SP

CFD OPTIMIzATION ON FEI SAE AERODESIgN Victor Kanehiro Arume de Souza, Centro Universitário da FEI

vALIDATED NUMERICAL ANALYSIS OF A WATER CENTRIFUgAL PUMPEdson luiz zaparoli, ITA - Instituto Tecnologico de Aeronautica

ADvANCED CFD POST-PROCESSINg TEChNIqUES USINg ENSIghTDaniel Bruno de Vasconcelos, ESSS

8:00 ADVANCED TRAiNiNG TECHNiCAl TOPiCS

18:00 END OF 3RD DAY




Electromagnetic Analysis of ElectromechanicalProducts using Maxwell

PRE AND POST PROCESSINg

ANSYS MEChANICAL I


10:20 International Speaker ANSYS TECHNOlOGY UPDATEPaul Galpin, ANSYS, Inc.

11:40 Sponsor Dr. Srinivas Kodiyalam, SGI

12:00 lUNCH

13:30 Management Track iNNOVATiON AND DEVElOPmENT iN CAPiTAl GOODS PROJECTS FOR CONSTRUCTiONWalter Rauen de Souza, Ciber Equipamentos Rodoviários Ltda.

14:00 Technical Speaker THE STRUCTURAl DESiGN OF NUClEAR COmPONENTS – iPEN DESiGN BY ANAlYSiS EXPERiENCE miguel mattar Neto, IPEN-CNEN/SP

14:30 Technical Speaker ANSYS SOFTWARE USAGE iN TECHNiP EqUiPmENTS AND ACCESSORiES DEPARTmENTFernando Toste, Technip

15:00 International Speaker RECENT ADVANCES iN DiSCRETE ElEmENT mODEliNG SimUlATiONS USiNG EDEmSriram Ramanathan, DEM Solutions


TECHNiCAl SESSiONS

uu NOVEmBER 13

Oil & GAS iiiKarolline Ropelato

OPTimizATiONRodrigo Ferraz

iNDUSTRiAl EqUiPmENTS iiiMauricio Pacheco

AUTOmOTiVERegis Ataides

POWER GENERATiON iiMartin Kessler

BiOmECHANiCSFernando Amaral

10:20 MINIMIzINg COkE FORMATION IN A DISTILLATION COLUMN ChIMNEY TRAY bY CFD ANALYSISAlessandra Bastos dos Santos,PETROBRAS

INTERFACE TO PERFORM DESIgN OF EXPERIMENTS (DOE) USINg ANSYS E vISUAL bASICDiego Fernandes Rodrigues, Instituto Superior Tupy

TRANSFER ChUTE OPTIMIzATION USINgmarcio zerwes, Martin Engineering

CFD STUDY OF hvAC SYSTEMGUSTAVO FONSECA DE FREiTAS mAiA, FIAT AUTOMOVEIS

FLOW METER ANALYSIS USINg CFDJairo zago de Souza, ESSS / PETROBRAS

ThE STRESS DISTRIbUTION INFLUENCE bY USINg bONE CEMENT AT FIXATION OF ENDO-OSSEUS FEMORAL STEM PROSThESISCarlos Rodrigo de mello Roesler, UFSC

10:40 REMOvINg COkE FINES FROM bOTTOM OF FRACTIONATOR TOWERS AND kNOCkOUT DRUM USINg CFD Karolline Ropelato,ESSS

gENETIC STRUCTURAL OPTIMIzATION APPLIED WITh TENSION, FLEXIbILITY AND bUCkLINg CONSTRAINTSRafael Sommer, TMSA

EDEM-ANSYS APPLICATIONS FOR MININg INDUSTRYmarcello Coelho Sousa, VALE

CAvITATION EROSION PREDICTION IN hYDRAULIC vALvE José Roberto Clark Reis, Robert Bosch Ltda

vALIDATION OF A qUICk PROCEDURE TO ESTIMATE MEAN vALUES IN qUASI-PERIODIC FLOWS: APPLICATION TO hEAT TRANSFER IN PIN-FINNED ChANNELSPaulo l. da Cunha lage, UFRJ

STRESS ANALYSIS MODELS OF hUMAN LONg bONES - ANALYTIC AND FINITE ELEMENT APPROAChESivan Thesi Riagusoff, ESSS

11:00 CFD SIMULATION OF MULTIPhASE FLOW IN A SIEvE TRAY OF A DISTILLATION COLUMN Joel Gustavo Teleken,UFSC

OPTIMIzATION OF AN ELECTRICAL COkE FURNACE USINg ANSYS CFX AND MODEFRONTIERRicardo Serfaty, PETROBRAS

COLD bENDINg OF ThERMALLY INSULATED PIPES: NUMERICAL SIMULATIONS USINg ANSYSFabiano Diesel, ESSS

ANALYSIS OF ThE FORMINg PROPERTIES OF A DUAL PhASE DP600 STEEL ShEET USINg ANSYS LS-DYNAGustavo lucas Rocha de Oliveira, USIMINAS

ANALYSES OF ThE gAS FLOW IN ThE INLET DUCTS OF A DUST COLLECTINg SYSTEM. MODELINg, SIMULATION, MEASUREMENTS AND CASE STUDYRenata Favalli, ENFIL Controle Ambiental

FATIgUE ANALYSIS OF ThE COLOSSO RC IMPLANT - EMFILS®marco André Argenta, UFPR

11:20 USINg ThE COMPUTATIONAL FLUID DYNAMICS TO ChARACTERIzE PERMEATION MODULES USINg MEMbRANES luzia Sergina de França Neta,UFRJ

APPLICATION OF MDO TEChNIqUES USINg MODEFRONTIER AT EMbRAERJuliano machado Tenorio Cavalcanti, EMBRAER

SIMPLIFIED STRESS ANALYSIS OF bAhIA bLANCA’S FCC STAND PIPEHervandil morosini Santanna, PETROBRAS

OPTIMIzATION OF bLANkS USED IN COOLINg COMPRESSOR COvER WITh ANSYS LS-DYNAleonardo Camilo dos Reis, USIMINAS

ThERMO-FLUID-DYNAMIC ANALYSIS IN PCI LANCESmagno Antonio Calil Resende Silveira, USIMINAS

SIMULATION OF ThE MEChANICAL bEhAvIOR OF bIOCOMPATIbLE DENTAL CEMENT USINg ThE ANSYSVanderson Deon, UFPR

11:40 CFD SIMULATION OF A REFINERY DOUbLE-FIRE FURNACE Raphael Bacchi,ESSS

ROUTINE FOR TRACkINg MODE ON AN OPTIMIzATION PRObLEMJulio Cesar da Silva, EMBRACO

DAMAgE ANALYSIS OF ThERMOCOUPLE WELLS IN FCC RISERS USINg CFDJairo zago de Souza, ESSS / PETROBRAS

NUMERICAL MODELINg OF ThE ShOT-PEENINg APPLIED TO AUTOMOTIvE SPRINgSmiguel Angel Calle Gonzales, Poli USP

SEA WATER bIOCIDE RELEASE OPTIMIzATION AT ANgRA 2 NUCLEAR POWER PLANTRoberto Silva de Oliveira, Eletronuclear S.A

12:00 CYCLONE DUST hOPPER INFLUENCE IN ThE vORTEX CORE Karolline Ropelato,ESSS

A NEW METhODOLOgY OF OPTIMIzATION AND NUMERICAL SIMULATION OF ThE FLOW OvER TURbINE bLADESAnna Paula de Sousa Parente Rodrigues, UnB

WELDINg PROCESS ANALYSIS APPLIED TO bRAkE ChAMbER SUPPORT OF LIghT DUTY vEhICLES Giovanni m. Teixeira, ESSS

hYDRODYNAMIC FORCES ON bOTTOM gATES FOR LARgE DAMSHarley Souza Alencar, ALSTOM

12:20 ClOSiNG lUNCH

8:00 TECHNiCAl TOPiCS

ANSYS MEChANICAL II ANSYS FLUENT ANSYS CFX ELECTRONICS OPTIMIzATION DISCRETE ELEMENT MODELINg


TECHNiCAl SESSiONS

ANSYS MEChANICAL II

ANSYS FLUENT ANSYS CFX ELECTRONICS OPTIMIzATION DISCRETE ELEMENT MODELINg

8:00 Solving Large Deflection Problems using ANSYS Explict STR

ANSYS Workbench 12 for Fluent Users

Using Multi-Configuration in ANSYS CFX-Pre

Using hFFS to Design Antennas

An introduction to Design Optimization with modeFRONTIER

Chute Transfer Simulation Using EDEM

8:25 Introducing the New Workbench / LS-Dyna Interface for Pre-processing of Explicit Dynamics Analysis

Parametric Analisys in ANSYS Fluent

basic Scripting in ANSYS CFX

Designing Electric Motors using RMxprt and Maxwell

Design Optimization using Experimental Data and Response Surfaces

Chute Transfer Simulation - Cohesive Material

8:50 Reducing Analysis Time with ANSYS Rigid Dynamics

FSI 1 way Fluent - ANSYS Workbench

ANSYS CFX Solver Manager

EMC/EMI Design Using Ansoft Tools

Solving Engineering Inverse Problems with modeFRONTIER

EDEM-ANSYS Coupling

9:15 best Practices on Modeling Contact Problems

Poliedric Meshes (Comparison in CFD-Post)

FSI - 6 DOF with with ANSYS CFX

Using the Multiphysics Approach to Design Electronic Devices

Coupling Multiple CAE Tools in a Single Optimization Study

EDEM-CFD Coupling


uu TECHNiCAl TOPiCS - NOVEmBER 12

uu TECHNiCAl TOPiCS - NOVEmBER 13

TECHNiCAl TOPiCS

PRE AND POST PROCESSINg ANSYS MEChANICAL I

8:00 CAD Integration and Defeaturing ANSYS Modeling Tools: A better Way to Improve your Structural Analysis

8:25 hybrid Meshing using ANSYS Meshing Parametrization and Optimization on Workbench 2: Working with DesignXplorer

8:50 ANSYS ICEM Multizone Considering Friction heating Effects on a Coupled Thermo-Structural Analysis

9:15 ANSYS CFD-Post Parallel Processing for FEA Users

TECHNiCAl TOPiCS

The Full System Emi/EmC methodology using Ansoft Tools

A student will learn which tools are needed to perform EMI/EMC analysis, and what part they play in the methodology. Additionally, a student will gain knowledge in how to properly create the necessary simulations and how to incorporate multiple simulation results into a final full system simulation.To accomplish the above, a student will obtain a basic understanding of how to create and solve simulations in SIwave, Ansoft Designer and HFSS. Additionally a student will gain knowledge of how to dynamically link different simulation together and how to use the “push excitations” function in Ansoft Designer.

Specifically, a student will learn how: to import a board file, setup, and solve an SIwave model; to dynamically link an SIwave model to Ansoft Designer, apply time based excitations to the linked model, and use the push excitation feature; to create an EMI plot in SIwave; to import a board housing and/or create an HFSS model and what the various excitations and boundaries are; to link data from SIwave into HFSS; to create an EMI plot in HFSS.

Instructor: Markus Kopp, ANSYS, Inc. Schedule: November 10Fee: R$ 950,00 (30% off for academic students)

Optimization Techniques using modeFRONTiER

This training is recommended for engineers and analysts (both numerical and experimental) interested in learning the fundamental concepts of optimization techniques applied to engineering projects. Topics to be covered during this course include: introductory concepts such as design of experiments (DOE), sensitivity analyses; advanced techniques such as multi-objective optimization algorithms, Robust Design, and meta-modeling. Practical examples are used to illustrate the different course topics, as well as the coupling between modeFRONTIER and other well-known CAE tools.

Instructor: Ana Paula Curty Cuco, ESSSSchedule: November 10Fee: R$ 950,00 (30% off for academic students)

Using EDEm for Discrete Element modeling

EDEM is the world’s first general-purpose CAE tool to use state-of-the-art discrete element modeling technology for the simulation and analysis of particle handling and manufacturing operations. EDEM has a user-friendly GUI including a portfolio of tools for model set up, solver control and analysis of results. Complex models involving irregular particles and complex equipment geometry can be implemented without any programming required. A fully customizable API enables coupling with external models and ANSYS tools.

Topics: • DEM (Discrete Element Modeling) • Creating and importing geometries • Setup, solver, post-processing and basic simulation • Contact models, adhesion, cohesion and body forces • Import particle templates and moving plane models • Using API to write, build, and include a new contact model

Instructor: Daniel Nasato, ESSS Schedule: November 10Fee: Free Registration - (Limited Availability).

ANSYS CFD - Turbomachinery Flow modeling

Focuses on the understanding of the phenomena associated with the turbomachinery flow modeling and the appropriated use of these resources in the ANSYS CFX software.

Instructor: Bruno Contessi, ESSS Schedule: November 10 - 11Fee: R$ 1.200,00 (30% off for academic students)

ANSYS mechanical - Advanced Contact and Fasteners

This course is recommended for engineers who want to use ANSYS to perform analysis on contact models that cannot be readily solved using default settings. Advanced Contact and Fasteners covers themes from contact stiffness and friction to surface-to-surface, node-to-node and bolt pretension elements on ANSYS Classic and Workbench platforms.

Instructor: Luiz Lima, ESSS Schedule: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)

ANSYS APDl Programming - integrating Workbench and Classic

This course is designed to professionals who want to use the ANSYS advanced resources on the Workbench platform through APDL Programming (ANSYS Parametric Design Language).

Instructor: Giovanni Teixeira, ESSS Schedule: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)

ANSYS mechanical Workbench - Rotordynamics

• Coriolis Effect and Reference Systems • Stationary reference system (Modal Analysis, Harmonic

Analysis, Synchronous Force, Asynchronous Force, Campbell Diagram, Whirl Orbit, Transient Analysis)

• Rotatory Reference System (Modal Analysis, Harmonic Analysis)

• Bearing

Instructor: Fabiano Nunes Diesel, ESSS Schedule: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)

Electromagnetic Analysis of Electromechanical Products using maxwell

Maxwell is the leading electromagnetic field simulation software used for the design and analysis of 3D/2D structures, such as motors, actuators, transformers and other electric and electromechanical devices common to automotive, military/aerospace, and industrial systems. Based on the Finite Element Method (FEM), Maxwell accurately solves static, frequency-domain and time-varying electromagnetic and electric fields.

Instructor: Mateus Bonadiman, ESSS Schedule: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)

uu ADVANCED TRAiNiNG



Costão do Santinho Resort and SPA, which is surrounded by crystalline water, which laps upon the shores of the capital of Santa Catarina, is located to the far north of Florianópolis, on Santinho beach. Santinho is one of the most beautiful of all the 42 beaches on the island and is only 35 km (21 miles) from the center. Blessed by the beautiful natural surroundings, Florianópolis offers a fine reference to the quality of life and is synonymous for holidays, sun, fun and beautiful people.

The gastronomy in the six restaurants at Costão do Santinho Resort and SPA is a special attraction. The Resort offers a vast choice of culinary options and without a doubt the best restaurants on the island.

Special daily rate for the 2009 ESSS South American ANSYS Users Conference attendees:

• Single Room: R$ 291,00 + 6,15% (tax)• Double Room: R$ 444,00 + 6,15% (tax)

uu SPECIAL RATES

A limited number of rooms at reduced rates is being held for attendees at Costao do Santinho Resort. To secure a room, please contact Camila Cintra at América do Sol Tourism and Events.

América do Sol Tourism and Events Contato: [email protected] Telefone: + 55 (48) 3224-7707

uu RESERVATION

Organization:information and Registration :http://www.esss.com.br/events/ansys2009+55 (48) 3953-0000 / (48) 3953-0056

Date post:	10-Jun-2018
Category:	Documents
Upload:	dinhtu
View:	225 times
Download:	0 times

2009 ESSS South American ANSYS Users Conference ESSS South American ANSYS Users Conference uu...

Documents