5101 N.W. 36 Avenue Miami, Florida 33142
Toll-Free: 1-866-6-GRILLE (647-4553) Phone: 305-537-0053 Fax: 305-537-0064
Email: [email protected]
IMPORTANT NOTE
Information in this FILE is current as of NOVEMBER 2009.
Product submittal drawings are updated periodically.
Please check our website at www.grilletechinc.com
for the most current drawings.
SERIES MODEL DESCRIPTION PAGE
UNIVERSAL PRODUCTS UNIVERSAL BACK PRODUCTS Lay-In Diffusers with Molded Fiberglass Plenum UP-1
PSF, PSC, PDL Perforated Face Supply Diffuser PF-1
PRD, PRN Perforated Return Diffuser PF-2
PDB, EDB, PRF, PSR Molded Back Ceiling Diffusers PF-3
BCD, S-OBD, OBR Optional Balancing Dampers PF-4
SCF Square Face / Round Neck Ceiling Diffuser SC-1
EPR Square Panel Diffuser SC-2
SMA, PF, CFB Accessories: Frames and Fire Blankets SC-2
UH-1 / UHOB-1 AND UH-2 /UHOB-2 Flush Frame Ceiling Diffuer, Frame Types 1 and 2 LF-1
with type 6 (Lay-In) Flush Frame Ceiling Diffuer, Type 6 (Lay-In) LF-2
URC-5 Concentric Supply/Return Diffuser LF-3
MCD Modular Core Ceiling Diffuser LF-3
SMA Mounting Frame SC-2
LPB / LPBI and LPBX / LPBXI Plenum type Slot diffusers PS-1
HID-H / HID-HR and High Induction Plenum Slot Diffusers PS-2
SMA Mounting Frame SC-2
LS / LR (A, B, C) Linear Slot Diffuser, Frame Types A, B and C LS-1
LSP / LSPI (A, B, C) Linear Slot Plenums for Lay-In and Surface Mount Applications, Types A, B and C LS-2
LSMC Mitered Corner Sections for LS/LR Linear Diffusers LS-2
BG 4 Series Linear Bar Type Grilles and Registers, 480 and 481 Series LBG-1
BG 5 Series Linear Bar Type Grilles and Registers 540 and 580 Series LBG-2
BGOHRC Linear Bar Grille with Removeable Core LBG-2
BGMC Mitred Corner Sections for BG Linear Bar Grilles LBG-3
FRBG French Riviera Bar Grille LBG-4
V / H Aluminum Single Deflection Supply, Vertical/Horizontal Blades AS-1
VOB, HOB Same as Above with Opposed Blade Damper AS-2
VH / HV Aluminum Double Deflection Supply, Vertical/Horizontal Blades AS-3
EV / EH Aluminum Single Deflection Supply, Extruded Frame, Vertical/Horizontal Blades AS-4
EVH / EHV Aluminum Double Deflection Supply, Extruded Frame, Vertical/Horizontal Blades AS-5
CL, CS Curved Blade Louvered Face Supply Grilles AS-6
CL-M, CS-M Curved Blade Louvered Face Supply Grilles, Multi-Shutter AS-7
CL-OB, CS-OB Curved Blade Louvered Face Supply Grilles with Opposed Blade Damper AS-8
CL/CS-1/2 (H, V, VD, HD) Curved Blade Supply, Secondary Airflow Adjustment for use with CL and CS Series AS-9
PF Plaster Frame SC-2
RA Aluminum Return AR-1
RAOB Aluminum Return with Opposed Blade Damper AR-2
RAHD / RAHDOB Heavy Duty Aluminum Louvered Face Return AR-3
RAC5 / RAC5OB Aluminum Return Filter Grille, Cube Core ½" x ½" x ½" AR-4
RAC5F Aluminum Cube Core Filter Grille, ½" x ½" x ½" AR-5
RAF 45° Deflection Filter Return AR-6
RAP / RAPOB Aluminum Perforated Return AR-7
RAPF / RAPOB Aluminum Perforated Return Air Filter AR-8
PF Plaster Frame SC-2
DOOR GRILLE DGS / DGF Aluminum Non-Vision Door Grille DG-1
OBD, PBD, HSBD and SBD Air Control Dampers CD-1
S-OBD, S-OBDH Multi-Shutter Blade Dampers CD-2
WLC Extruded Outside Wall Louver WL-1
WLF Extruded Outside Wall Louver, Flanged WL-2
WLF-DA Miami-Dade Approved Hurricane Louver WL-3
BVF2I, BVF4I and BVC4I Brick Vent Wall Louvers WL-4
FIRE PRODUCTS PBZZU, SCFBZZU Fire Rated Diffusers and Returns FP-1
STR Square to Round Adapter SP-1
UBC Universal Back Collar SP-2
WAPI Wall Access Panel With Insulation SP-3
LINEAR SLOT DIFFUSER
WALL LOUVERS
SPECIAL PRODUCTS
CONTROL DAMPER
ALUMINUM RETURN GRILLE & REGISTER
ALUMINUM SUPPLY GRILLE & REGISTER
LINEAR BAR GRILLE
PRICING INFORMATION TABLE OF CONTENTS
PERFORATED FACE DIFFUSER
PLENUM SLOT DIFFUSER
LOUVER FACE DIFFUSER
SQUARE CONE DIFFUSER
UNIVERSAL PRODUCTSLay-In Diffusers with Molded Fiberglass Plenum
DESCRIPTION LIST PRICEPERFORATED FIXED FACE $15.76
PERFORATED ADJUSTABLE FACE $19.73EXPANDED FIXED FACE $14.34
EXPANDED ADJUSTABLE FACE $20.13PERFORATED RETURN REMOVABLE FACE W/ FILTER $32.21
PERFORATED DIFFUSER REMOVABLE FACE 4WAY ADJ $26.17FLAT PANEL DIFFUSER $45.00
SQUARE CONE FACE DIFFUSER $48.00CUBE CORE REMOVABLE FACE $37.23
RETURN T-BAR, 24"x24" $51.51RETURN T-BAR W/ FILTER, 24"x24" $64.90
ALUMINUM PANEL RETURN *see notesALUMINUM PANEL RETURN W/ FILTER *see notesALUMINUM PANEL W/ LOUVERED FACE *see notes
Notes:
R-8 molded back available for an additional charge. 2. All diffusers require field cutting of the inlet connection. 3. UBC (universal back collar) available for all Universal Back products. 4. Inlet collars must be field supplied. * Sizes for theses models range from 6"x6" to 18"x18". Please call our office for quotes.
1. All diffuser models shown include a fiberglass backpan (R-6 insulating value) and are 24 x 24".
EPRIUSCFIUCLR
RATURAFTURA6AU
RAF6AUUHU
MANY OF OUR DIFFUSERS ARE NOW AVAILABLE WITH A UNIVERSAL FIBERGLASS BACK.
PSR
EDBEDBAPRF
MODEL NUMBER
PDBAPDB
Universal Products List Prices • Grille Tech Inc. • 9/2/2008 UP-1
PSF, PSC, PDL Perforated Supply Diffusers, Removable FaceSteel Supply Flush Faced Perforated Diffuser
6 - 14" Rd.6 - 14" Sq.
* * * * * * * * * *
PDL (All Round Necks) Unique in the industry, the PDL is a high induction perforated diffuser with
excellent induction as the airflow is reduced in a VAV system. Thisdiffuser was developed as a companion product to the VAV line and is
24 x 24" 6 - 14" specified for its excellent turn down ratio.
Notes:
1. Unit includes steel removable face. $30 List Add for aluminum face.2. For face or neck other than shown, contact factory.3. If surface mount requires connection to flexible duct, use Lay-in (Style 6) and add auxiliary mounting frame Model SMA, $25 List (24 x 24").4. For matching return unit see models PRD (ducted) and PRN (non-ducted).5. All white is standard. 25% List Add for black backpan.6. Prices do not include damper. For optional balancing damper pricing, please refer to damper section. Square applications use OBD. Round applications use BCD or OBR.
LIST PRICE
LIST PRICE
$40$47
SQUARE DUCT
24 x 24"
$41
ROUND DUCT
6 - 14" Rd.6 - 14" Sq.
6 x
6"8
x 8"
$34
10"
12"
14"
CEILING MODULE NECK SIZE
Model PSC
12 x
12"
14 x
14"
Size Availability, PSF and PSC
CEILING MODULE
NECK SIZE*
CEILING MODULE
24 x 24"
CEILING MODULE SIZE
10 x
10"
NECK SIZE*
LIST PRICE
8"6"
Model PSF
24 x 24"$28
Perforated Face Diffuser List Prices • Grille Tech Inc. • 8/25/2008 PF-1
PSF, PSC Perforated Supply Diffusers
Model Number Frame Type
Air Pattern (PSC only) Neck Size Ceiling
Module
1 = 1-Way2 = 2-Way
2C = 2-Way Corner3 = 3-Way4 = 4-Way
6 x 6 Rd. (or Sq.)
24 x 24
PDL (Round Neck) Perforated Supply Diffuser
Model Number Neck Size
06
Frame Type
Example: PSF 06R 2424
PSCD (deflector in neck) = diffuser with butterfly damper
PSCA (deflector in neck) = aluminum face diffuser no damper
PSCOB (deflector in neck) = aluminum face diffuser with S-OBD damper
PSCOB (deflector in neck) = diffuser with S-OBD damper
PSCD (deflector in neck) = aluminum face diffuser with butterfly damper
Drop face T-Bar (Standard)
PSFD (deflector on face) = diffuser with butterfly damper
PSFAD (deflector on face) = aluminum face diffuser with butterfly damper
PSC (deflector in neck) = diffuser no damper
PSFA (deflector on face) = aluminum face diffuser no damper
SM = Surface mount
PSF (deflector on face) = diffuser no damper
PSFOB (deflector on face) = diffuser with S-OBD damper
PSFAOB (deflector on face) = aluminum face diffuser with S-OBD damper
PDL = Diffuser (no damper)PDLD = Diffuser with butterfly damper
Example: PDL 1 06 2424
PDLN = Aluminum diffuser (no damper)PDLOB = Diffuser with S-OBD damper
PDLOBN = Aluminum diffuser with S-OBD damperPDLDN = Aluminum diffuser with butterfly damper
Paint Finish
White Face (standard)
8 = Drop face T-Bar
1 = Surface mount (use SMA frame)6 = Lay in (1") T-Bar
B = Black Backpan (optional)
B = Black Backpan (optional)
Paint Finish
White Face (standard)
PRD, PRN Perforated Return Diffusers
PRD Perforated Return, Ducted Panel
6 - 14" Rd.6 - 14" Sq.
22" Sq.
* * * * * * * * * * *
PRN Perforated Return, Non-Ducted Panel
Notes:1. Unit is white unless otherwise specified.2. Unit includes steel removable face. Add $30 for aluminum face.3. For face or neck other than shown, contact factory.4. If surface mount requires connection to flexible duct, use Lay-in (Type 6) and add auxiliary mounting frame Model SMA, $25 List (24 x 24").5. All white is standard. 25% List Add for black backpan.
ROUND DUCTSQUARE DUCTPRD Size Availability
CEILING MODULE SIZE
6 x
6"
8 x
8"
22 x
22"
6" 8" 10"
12"
14"
24 x 24"$29$37$27
CLNG. MODULE
NECK SIZE*
LIST PRICE
Ceiling Module Size24 x 24"
List Price$16
10 x
10"
12 x
12"
14 x
14"
24 x 24"
Perforated Face Diffuser List Prices • Grille Tech Inc. • 10/21/2009 PF-2
PRD, PRN Perforated Return Diffusers
Model Number Frame Type* Neck Size* Neck Type* Ceiling Module
6"
*PRD only
1 = Surface mount R = ROUND
6 = Lay in (1") T-Bar S = SQUARE
8 = Drop face T-Bar *PRD only
* PRD only
24 x 24
Example: PRDD 1 6R 2424PRNN = aluminum non-ducted return panel diffuser
PRDD = ducted return diffuser with damper
PRN = non-ducted return panel diffuser
PRDN = aluminum ducted return diffuser no damper
PRDDN = aluminum ducted return diffuser with damper
Paint Finish
White Face (standard)
PRD = ducted return diffuser no damper
B = Black Backpan (optional)*
*PRD only
PDB/PDBA, EDB/EDBA, PRF, PSR Molded Back Ceiling DiffuserMolded Fiberglass Plenum
LIST PRICE$15.76$19.73$30.52$14.34$20.13$16.73$32.21$26.17
Notes: 1. All diffuser models shown include a fiberglass backpan (R-6 insulating value). 2. PDB/PDBAs and EDB/EDBAs have a non-removable face. 3. Models EDB and EDBA feature an expanded steel face. 4. Models PDB, PDBA, PRF, and PSR include a perforated steel face. 5. Both type of screens have a 51% free area. 6. PDBA, EDBA, and PSR feature 4 adjustable air pattern controllers mounted to the face. 7. PDB and EDB feature a fixed 4-way deflector mounted to the face. 8. Model PRF features a removable face, 1" disposable filter, and molded fiberglass plenum. 9. Model PSR features a removable face, 4-way adjustable pattern, and molded fiberglass plenum.10. All diffusers require field cutting of the inlet connection.11. Inlet collars must be field supplied.
PSR 24 x 24" Adjustable
Adjustable
EDBEDBA 24 x 24" Adjustable
PRF 24 x 24" Fixed
24 x 24"
EDBN 24 x 24" Fixed
24 x 24" Fixed
MODEL NUMBER CLNG. MOD. SIZE
FixedPDBN 24 x 24"
DEFLECTOR TYPEFixed
PDBA 24 x 24"PDB
Perforated Face Diffuser List Prices • Grille Tech Inc. • 8/25/2008 PF-3
PDB/PDBA, EDB/EDBA, PRF, PSR Molded Back Ceiling Diffuser
Model Number Paint Finish, Face
White (standard)
PDB = Perforated Face Supply diffuser (fixed pattern)PDBA = Perforated Face Supply diffuser (adjustable pattern)
Examples: PDBPRF = Perforated Removable Face Supply diffuser (fixed pattern) with FilterPSR = Perforated Removable Face Supply diffuser (4-way adjustable pattern)
EDBA = Expanded Metal Face Supply diffuser (adjustable pattern)EDB = Expanded Metal Face Supply diffuser (fixed pattern)
PDBN
Option
N = Aluminum (for PDB & EDB ONLY)Steel (Standard)
Optional Balancing Dampers
BCD: Round Butterfly Control Damper For Round Neck Perforated, Square Cone and Model EPR Diffusers
Size (Diameter) 6" 8" 10" 12" 14"
List Each $18 $18 $18 $26 $26
NOTE: No damper over 14".
S-OBD: Opposed Blade Damper, For Use On Back of Grilles Sizes Shown for Square Neck Perforated Diffusers
Size 6" x 6" 8" x 8" 10" x 10" 12" x 12" 14" x 14" 16" x 16" 18" x 18" 22" x 22"
List Each $9 $9 $12 $13 $26 $30 $31 $39
OBR: Round Opposed Blade Damper For Model EPR Square Panel Diffuser and Any Round Neck Diffusers
Size (Diameter) 6" 8" 10" 12" 14"
List Each $26 $26 $26 $30 $36
Notes:No round dampers over 14".
* See page CD-2 (Control Dampers) for complete S-OBD pricing.
Perforated Face Diffuser List Prices • Grille Tech Inc. • 8/25/2008 PF-4
SCF, SCFI Square Face Round Neck Ceiling Diffuser
FACE SIZE
BOX QTY
SCFIU Universal (Insulated)
R/6
NECK DIAMETER
(Round Only)
SCF (Fixed)
SCFD With BCD Damper
SCFOB With OBR Damper
SCFI (Insulated)
R/6
SCFID With BCD damper
(Insulated) R/6
SCFIOB With OBR Damper
(Insulated) R/6
4 $48 4" NA NA NA NA NA NA4 $48 6" $33 $45 $60 $48 $60 $75 4 $48 8" $33 $45 $60 $48 $60 $75 4 $48 10" $33 $45 $60 $48 $60 $75 4 $48 12" $33 $49 $60 $48 $60 $75 4 $48 14" $35 $50 $70 $48 $65 $85
Notes: 1. Diffuser is intended for lay-in (standard) or surface mount ceiling application. 2. If surface mount requires connection to flexible duct, use Lay-in and add auxiliary mounting frame Model SMA, $25 List. 3. Three cone is standard. For optional four cone, $12 List Add. 4. Unit available only in the sizes listed. 5. Diffuser and damper are constructed of steel. 6. Standard finish is white. 7. Round necks only. 8. All SCFIUs require field cutting of inlet connection, 4"-14". 9. Inlet collars must be field installed on SCFIU/EPRIUs.10. UBC (universal back collar) available for all Universal Back products.11. Custom colors available at additional charge.
24 x 24"
Square Cone Diffuser List Prices • Grille Tech Inc. • 8/25/2008 SC-1
SCF, SCFI Square Face Round Neck Ceiling Diffuser
Model Number Frame Type Neck Size
Ceiling Module
Number of Cones
3 (standard)
06 4 (optional)
24 x 24
Lay in (1") T-Bar
Surface Mount
Note: If not otherwise indicated, diffuser comes standard for lay-in application.
SCFIOB = Square face/round neck, fixed pattern, OBR damper, insulated R/6
SCFIU = Square face, universal 4"-14" cut out pattern, insulated R/6
SCF = Square face/round neck, fixed pattern
SCFD = Square face/round neck, fixed pattern, BCD damper
SCFOB = Square face/round neck, fixed pattern, OBR damper
SCFI = Square face/round neck, fixed pattern, insulated R/6
SCFID = Square face/round neck, fixed pattern, BCD damper, insulated R/6
SCFIU 2424 - 3
Paint Finish, Face
W = White
Examples: SCF 06 2424 - 3
EPR Square Panel Diffuser
FACE SIZE NECK SIZE6"8"10"12"14"
Note:1. Prices do not include optional balancing damper. See OBR (Round Opposed Blade Damper) and BCD (Butterfly Damper) pages for these.2. $12 List Add for insulated back pan.
Optional Pattern Controls for EPRTYPE SECTION BLOCKS1-Way 3 Sections2-Way 2 Sections3-Way 1 Section
ACCESSORIES: Mounting Frames and Fire BlanketSMA and PF: Mounting & Plaster Frames
Model Per Perimeter FootSMA (Mounting Frame) 12 x 12" 24 x 12" 24 x 24" 36 x 24" 36 x 36" 48 x 24" 48 x 48"
PF (Plaster Frame) $14 $16 $25 $30 $36 $42 $53
Note:1. SMA frame include 3/4" panhead screws and mounting clips, four per unit.2. SMA frame for use with plenum diffuser, $3.50 per perimeter foot.
CFB: Ceramic Fire BlanketDIFFUSER FACE SIZE LIST PRICE
24 x 24" $23
EPRIU 24 x 24"
$12
LIST PRICE
$3.50
LIST PRICE
EPR 24 x 24" $45
$36$24
SMA FRAME SIZES
Universal (Insulated) R/6 $45
Square Cone Diffuser List Prices • Grille Tech Inc. • 10/8/2008 SC-2
EPR Square Panel Diffuser
Model Number Neck Size Ceiling Module Paint Finish Options
24 x 24
08
W = White
EPR = Square panel diffuser PC1 = 1 pattern controller
EPRIU = Universal Square panel diffuser PC2 = 2 pattern controller
PC3 = 3 pattern controller
OBD = Opposed Blade Damper
BCD = Butterfly Damper
ACCESSORIES: SMA, SMA-S and PF Mounting Frames
Model Number Face Size (SMA, SMA-S) Paint Finish
Face Overall
Dimension or
Grid Size
Of Product To
Be Used With
W = White
SMA = Mounting frame for lay-in
SMA-S = Slimline mounting frame for lay-in
PF = Plaster frame Example: SMA 2424 W
Example: EPR 08 2424 W PC2
Neck Size (PF)
Nominal Neck Size and
Product To Be Used With
EPRIU 2424
UH Series Ceiling Diffusers, Frame Types 1 & 2UH-1 and UHOB-1: Flush Frame (Frame Type 1)UH-2 and UHOB-2: Bevel Frame (Frame Type 2)
UH Louvered Face Directional Diffuser, No Damper
6" 9" 12" 15" 18" 21" 24" 27" 30" 33" 36"6" $29 $33 $37 $41 $47 $53 $59 $64 $70 $74 $809" $35 $45 $53 $60 $66 $74 $82 $90 $98 $105
12" $55 $64 $72 $82 $92 $101 $109 $119 $12915" $76 $88 $101 $111 $123 $135 $146 $16218" $101 $117 $131 $146 $160 $177 $19521" $131 $152 $169 $187 $205 $22824" $166 $195 $211 $234 $25427" $211 $234 $257 $28130" $263 $289 $31233" $316 $34536" $378
UHOB Square or Rectangular Neck Diffuser, w/ S-OBDH Opposed Blade Damper
6" 9" 12" 15" 18" 21" 24" 27" 30" 33" 36"6" $36 $40 $46 $51 $58 $66 $72 $84 $90 $97 $1039" $44 $55 $64 $73 $80 $90 $105 $113 $124 $131
12" $65 $77 $86 $98 $109 $124 $133 $149 $15815" $99 $111 $127 $140 $163 $178 $195 $20818" $125 $144 $161 $189 $204 $227 $24421" $161 $185 $214 $234 $259 $28224" $200 $241 $260 $291 $31127" $291 $317 $351 $37230" $342 $373 $40133" $403 $43636" $475
Notes:1. Prices are for Types 1 and 2 frame (see next page for Type 6 and Round).2. Finish is white unless otherwise specified.3. Sizes larger than shown are available; contact factory.4. Core Only: 75% of List.5. Construction is extruded aluminum. Damper is steel. Alumimum panels are available, $30 List Add (24 x 24").6. If square to round adapters are needed, please contact our office.
HEI
GH
TH
EIG
HT
WIDTH
WIDTH
Louver Face Diffuser List Prices • Grille Tech Inc. • 8/25/2008 LF-1
UH Series Ceiling Diffusers, Frame Types 1 & 2
Model Number Frame Type Air Pattern
(See Drawing Below)Neck Size -
Square & Round (nominal) Paint Finish, Face Option
White
2C
0909 S = (9 x 9" square)
UH Series Air Patterns, Face View
PD = Air Pattern
Deflector1208 R = (12 x 12" with 8" round neck)
1 = Surface mount flush frame
2 = Surface mount beveled frame
UH = Square neck diffuser, horiz. tip blade, no damper
UHOB = Square neck, horiz. tip blade, S-OBDH damper Example: UHOB 1 2C 0909S PD
UH Series Ceiling Diffusers, Type 6 (Lay-In)1" Inverted Tee-Bar
UH 6A
6" 9" 12" 15" 18" NOMINAL PANEL ROUND LIST6" $53 $57 $61 $65 SIZE SIZE NECK PRICE9" $59 $69 $77 6 x 6" 6" $59
12" $79 $88 9 x 9" 6 , 8" $6615" $100 12 x 12" 6, 8, 10, 12" $8718" $101 15 x 15" 6 - 14" $110
18 x 18" 6 - 16" $112
UH 6A With Optional Balancing Dampers
6" 9" 12" 15" 18" NOMINAL PANEL ROUND LIST6" $60 $64 $70 $75 SIZE SIZE NECK PRICE9" $68 $79 $88 6 x 6" 6" $71
12" $89 $101 9 x 9" 8" $8015" $123 12 x 12" 12" $10318" $125 15 x 15" 14" $128
18 x 18" 14" $130
Notes:1. All pricing is for Type 6 (Lay-in) border only.2. Construction: Diffuser is extruded aluminum, panel is aluminum.3. Damper is steel construction.4. The 18 x 18" nominal size is full face.5. Finish is white unless otherwise specified.6. Oversized units: contact factory for size, availability and price.7. Core Only: 75% of List.8. Extended Panels for other panel sizes, contact factory.9. If square to round adapters are needed, please contact our office.
24 x 24"
24 x 24" Panel (No Damper)Square and Rectangular Necks
S-OBDH (Opposed Blade Damper)24 x 24" Panel
24 x 24"
Round Neck Models24 x 24" Panel (No Damper)
24 x 24" PanelBCD (Butterfly Damper)
Louver Face Diffuser List Prices •Grille Tech Inc. • 10/21/2009 LF-2
UH Series Ceiling Diffusers, Frame Type 6 (Lay-In)
Model Number
Frame Type Panel Type
Air Pattern (See drawing
below)
Neck Size - Square & Round (nominal) Panel Size Paint Finish,
Face Option
2C 24 x 24
White
6 = Lay-in
S = SteelA = Aluminum
UH Series Air Patterns, Face View
PD = Air Pattern Deflector
Example: UH 6 S 2C 0909S PDUHOB = Square neck, horizontal tip blade, S-OBDH damper
0909 S = (9 x 9" square)
1208 R = (12 x 12" with 8" round neck
UH = Square neck diffuser, horizontal tip blade, no damper
URC-5 Concentric Supply/Return Diffuser
Surface or Duct Mounted ApplicationUNIT SUPPLY DUCT RETURN DUCT LISTSIZE (nominal) (nominal) PRICE1209 12 x 12" 9 x 9" $511509 15 x 15" 9 x 9" $821812 18 x 18" 12 x 12" $1071815 18 x 18" 15 x 15" $1112115 21 x 21" 15 x 15" $1382418 24 x 24" 18 x 18" $1762718 27 x 27" 18 x 18" $2163021 30 x 30" 21 x 21" $2733321 33 x 33" 21 x 21" $3283624 36 x 36" 24 x 24" $3863927 39 x 39" 27 x 27" $5214227 42 x 42" 27 x 27" $6034230 42 x 42" 30 x 30" $6064233 42 x 42" 33 x 33" $6124530 45 x 45" 30 x 30" $6944833 48 x 48" 33 x 33" $7745436 54 x 54" 36 x 36" $9616045 60 x 60" 45 x 45" $1149
Notes:1. Diffuser is intended for supply/return use in conjunction with a rooftop air handler.2. Supply section is a fixed (non-removable) core, 4-way discharge.3. Return section is permanently fastened within the interior of the supply core.4. Construction: Diffuser is constructed of extruded aluminum.5. Finish is white unless otherwise specified.6. Sizes 1812 and 1815 are suitable for Tee-bar installation.
MCD Modular Core DiffuserSurface Mounted (Type 1) and Lay-In (Type 6) Applications
NECK TYPE 1 TYPE 1 TYPE 6 TYPE 6SIZE LIST PRICE LIST PRICE LIST PRICE LIST PRICE
(nominal) (no damper) (with damper) (no damper) (with damper)8 x 8" $45 $52 $73 $80
10 x 10" $52 $62 $80 $9012 x 12" $64 $76 $92 $10414 x 14" $76 $90 $104 $11816 x 16" $88 $106 $116 $13418 x 18" $112 $134 $112 $13420 x 20" $152 $17822 x 22" $208 $23824 x 24" $196 $232
Notes:1. Type 6 Panel Size is 24 x 24" (nominal).2. Construction: Diffuser is constructed of extruded aluminum. Damper and panel are steel construction. For Aluminum panel, Add $30 List.3. 18 x 18" nominal are full face that lay into 24 x 24" ceiling module.4. Finish is white unless otherwise specified.
Louver Face Diffuser List Prices • Grille Tech Inc. • 10/21/2009 LF-3
URC-5 Concentric Supply/Return Diffuser
Model Number
MCD Modular Core Diffuser
Model Number Frame Type Neck Size Panel Size (Type 6 Models Only) Paint Finish
6 x 6
24 x 24
White1 = Flush surface mount6 = 1" inverted T-bar lay in
Example: MCDD 6 0606 2424
Paint Finish
White
Unit Size (Width x Height, Supply/Return)
2418
Example: URC5 2418URC5 = Concentric Supply/Return Diffuser
MCD = Modular core diffuser (no damper)MCDD = Modular core diffuser (with damper)
LPB and LPBX Series Plenum Slot DiffuserDIFFUSER NUMBER MAXIMUM LPB LPBI LPBX LPBXI
LENGTH OF SLOTS INLET SIZE (uninsulated) (insulated) (uninsulated) (insulated)1 8" Oval $39 $45 $39 $452 8" Oval $43 $49 $49 $553 10" Oval $47 $53 $59 $654 10" Oval $51 $57 $69 $751 8" Oval $41 $49 $45 $532 8" Oval $47 $55 $56 $643 10" Oval $53 $61 $67 $754 10" Oval $59 $67 $78 $861 12" Oval $45 $55 $50 $602 12" Oval $51 $61 $68 $763 12" Oval $57 $67 $86 $944 12" Oval $63 $73 $104 $1141 12" Oval $51 $63 $56 $682 12" Oval $57 $69 $62 $743 12" Oval $63 $75 $91 $1034 12" Oval $69 $81 $109 $121
Notes:1. LPB and LPBI are 3/4" and 1" slot widths. LPBX and LPBXI are 3/4", 1", and 1 1/2" slot widths.2. SMA frame $3.50 per perimeter foot. $15 minimum charge.3. All tees are white, other visible surfaces are flat black.4. Size 5 and 6 inlets are round. All others are oval.5. Air pattern controllers are shipped loose for field installation (LPB and LPBI only).6. Air pattern is field adjustable without pattern controller removal (LPBX and LPBXI only).7. Center Notch (CN) option, add $4 List.8. Impact insulation (insulation opposite inlet only) add $3 List.9. Prices are for Type 0 border (no T). See Border Option table (below) for List Price Adds for additional types.
Border Type Options (see Submittal Drawing PB101-A for border type illustrations)Border type
1C*101S2
20*2S*3*
*Not available on single slots.Types 1C, 2O, 2S and 3 require the purchase of all interior T's (2 slot requires one T, 3 slot requires two T's, 4 slot requires three T's), plus any exterior T's.
T at inlet and opposite inlet, no center T (2 T's)T at inlet and center T (2 T's)
T at center and opposite inlet (2 T's)T at inlet, opposite inlet, and center (3 T's)
DescriptionCenter T (1 T)
T at inlet side only (1 T)T at opposite inlet side only (1 T)
List add per foot of Diffuser
60"
24"
36"
48"
$3.00$3.00$4.50
$1.50$1.50$1.50$3.00
Plenum Slot Diffuser List Prices • Grille Tech Inc. • 8/25/2008 PS-1
LPB and LPBX Series Plenum Slot Diffuser
Model Number Frame Type*
Nominal Length
Number of Slots Inlet Diameter Options
24
3 CN = Center Notch
1C N = None
10 IA = Target Impact
1S
2
20 8
2S
3
*Note: Types 1C, 2O, 2S and 3 require the purchase of all interior T's (2 slot requires one T, 3 slot requires two T's, 4 slot requires three T's), plus any exterior T's.
LPBI40 = 3/4" slot width, insulated
LPBI60 = 1" slot width, insulated
LPBX10 = extruded pattern controller, 1" slot width, uninsulated
LPB40 = 3/4" slot width, uninsulated
LPB60 = 1" slot width, uninsulated
Example: LPB40 1C 24 3 8 CN
LPBX75 = extruded pattern controller, 3/4" slot width, uninsulated
LPBX15 = extruded pattern controller, 1 1/2" slot width, insulated
LPBXI75 = extruded pattern controller, 3/4" slot width, insulated
LPBXI10 = extruded pattern controller, 1" slot width, insulated
LPBXI15 = extruded pattern controller, 1 1/2" slot width, insulated
HID-H & HID-HR High Induction Plenum Slot Diffuser
DIFFUSER MAXIMUM HID-H MODELS HID-HR MODELSLENGTH INLET SIZE (Supply only) (Supply/Return)
HID-HV & HID-HVR High Induction Plenum Slot DiffuserWith Integral Downblow Section in Supply Slot
DIFFUSER MAXIMUM HID-HV MODELS HID-HVR MODELSLENGTH INLET SIZE (Supply only) (Supply/Return)
Notes:1. All visible surfaces are flat black.2. Size 5 and 6 inlets are round. All others are oval.3. Models shown are for Lay-in application only. If surface mount is required, contact factory.4. Basic model is uninsulated. If external insulation is required, contact factory for pricing and availability.
60" 10" Oval $66 $78
48" 10" Oval $60 $72
36" 10" Oval $52 $64
24" 8" Oval $46 $58
48"
$53
$47
10" Oval $50 $62
$6860" 10" Oval
$35
$57
24" 8" Oval
36" 10" Oval $41
Plenum Slot Diffuser List Prices • Grille Tech Inc. • 8/25/2008 PS-2
HID Series High Induction Plenum Slot Diffuser
Model Number Length Inlet Diameter
10
36
Example: HIDH 500 36 10
HID-HR 500 = 3/8" slot width supply/return diffuser
HID-HR 750 = 3/4" slot width supply/return diffuser
HID-H 500 = 3/8" slot width supply diffuser
HID-H 750 = 3/4" slot width supply diffuser
HID-HV 500 = 3/8" slot width supply diffuser
HID-HV 750 = 3/4" slot width supply diffuser
HID-HVR 500 = 3/8" slot width supply/return diffuser
HID-HVR 750 = 3/4" slot width supply/return diffuser
LS, LR Linear Slot Diffusers, Supply/ReturnFrame Types A, B, and C
LS50, LS75, LS10 SupplyTYPE A (SURFACE MOUNT) TYPE C (SURFACE MOUNT)
Concealed Mounting Concealedwith Screwholes 24" 36" 48" 60" 72" Mounting
1 $13.20 per Ft. $33.00 $46.20 $59.40 $68.20 $81.40 $15.40 per Ft.2 $17.60 per Ft. $41.80 $59.40 $77.00 $94.60 $112.20 $20.90 per Ft.3 $26.40 per Ft. $59.40 $85.80 $112.20 $138.60 $165.00 $29.70 per Ft.4 $31.90 per Ft. $70.40 $102.30 $134.20 $166.10 $198.00 $35.20 per Ft.5 $37.40 per Ft. $81.40 $118.80 $156.20 $193.60 $231.00 $40.70 per Ft.6 $42.90 per Ft. $92.40 $135.30 $178.20 $221.10 $264.00 $46.20 per Ft.7 $48.40 per Ft. $103.40 $151.80 $200.20 $248.60 $297.00 $51.70 per Ft.8 $53.90 per Ft. $114.40 $168.30 $222.20 $276.10 $330.00 $57.20 per Ft.
LR50, LR75, LR10 ReturnTYPE A (SURFACE MOUNT) TYPE C (SURFACE MOUNT)
Concealed Mounting Concealedwith Screwholes 24" 36" 48" 60" 72" Mounting
1 $8.80 per Ft. $24.20 $33.00 $41.80 $50.60 $59.40 $11.00 per Ft.2 $12.10 per Ft. $30.80 $42.90 $55.00 $67.10 $79.20 $15.40 per Ft.3 $18.70 per Ft. $41.80 $59.40 $77.00 $94.60 $112.20 $22.00 per Ft.4 $23.10 per Ft. $50.60 $72.60 $94.60 $116.60 $138.60 $26.40 per Ft.5 $27.50 per Ft. $59.40 $85.80 $112.20 $138.60 $165.00 $30.80 per Ft.6 $31.90 per Ft. $68.20 $99.00 $129.80 $160.60 $191.40 $35.20 per Ft.7 $36.30 per Ft. $77.00 $112.20 $147.40 $182.60 $217.80 $39.60 per Ft.8 $40.70 per Ft. $85.80 $125.40 $165.00 $204.60 $244.20 $44.00 per Ft.
* Type B (Lay-In) prices are per unit. End caps for both ends are included unless otherwise specified.
Notes:1. Linear Slot End Caps are available for surface mount applications (Type V or Type H) for $6 List each.2. Maximum 72" section length.3. Same dimensions for LS Supply and LR Return.
NUMBER OF
SLOTS
NUMBER OF
SLOTS
Diffuser Length (nominal)TYPE B (LAY-IN)*
TYPE B (LAY-IN)*Diffuser Length (nominal)
Linear Slot Diffuser List Prices • Grille Tech Inc. • 8/25/2008 LS-1
LS, LR Linear Slot Diffusers, Supply/Return
Model Number Frame Type Length
(nominal) Number of Slots End Configuration Paint Finish
1 thru 8
24 = 24"
36 = 36"
48 = 48" HO = Hidden / Open
60 = 60" OO = Open both ends
72 = 72" VV = Visual both ends
VH = Visual / Hidden
VO = Visual / Open
B = Lay-In W = White
D = Donn Fine Line
LS50 = Supply with 1/2" slot
LS75 = Supply with 3/4" slot
LS10 = Supply with 1" slot
LR50 = Return with 1/2" slot
LR75 = Return with 3/4" slot
LR10 = Return with 1" slot
A = Surface Mount (screwholes)
C = Surface Mount (concealed)
HH = Hidden both ends (standard on Lay-In models)
Example: LS50 A 24 3 HH - W
LSP and LSPI, Plenums for Lay-In and Surface Mount ApplicationsFor Use With LS/LR Linear Slot Diffuser Type A, B and CLSP50: 1/2" Slot LSP75: 3/4" Slot LSP10: 1" Slot
NUMBEROF
SLOTS 24" 36" 48" 60" 72" 24" 36" 48" 60" 72"1 $29 $34 $39 $44 $49 $36 $42 $48 $54 $602 $32 $39 $42 $48 $54 $40 $47 $53 $60 $673 $35 $44 $45 $52 $59 $44 $52 $58 $66 $744 $38 $49 $48 $56 $64 $48 $57 $63 $72 $815 $41 $54 $55 $60 $69 $52 $62 $68 $78 $886 $44 $59 $60 $64 $74 $56 $67 $73 $84 $957 $47 $64 $65 $68 $79 $60 $72 $78 $90 $1028 $50 $69 $70 $72 $84 $64 $77 $83 $96 $109
Notes:1. Use Type C for surface applications.3. Model sizes other than shown, contact factory for pricing and availability.4. Pricing is for listed size or smaller inlets. Contact factory for others.
Linear Slot Mitred Corner Sections, 90° AnglesFor Use With LS50, LS75 and LS10 Plenums
LSMC50, LSMC75, LSMC10NO. OFSLOTS
12345678
Notes:1. Mitred corner sections are provided inactive with blankoff strips to prevent light penetration.2. If other mitred angles are required, contact factory for pricing and availability.
BOS (Blank-Off) Strips: $1.50 per linear foot.
24"24"
$360
DIFFUSER LENGTH (nominal)LSPI (Insulated)
DIFFUSER LENGTH (nominal)LSP (Uninsulated)
$400
12"24"
$135$240$280$320
LSMC 90° Angle
12"12"
OUTSIDE LEGDIMENSION
12"12"
LIST PRICE$80$110
Linear Slot Diffuser List Prices • Grille Tech Inc. • 8/25/2008 LS-2
LSP and LSPI, Plenums for Lay-In and Surface Mount Applications
Model Number Frame Type Length
(Nominal) Inlet Diameter
24 = 24"
36 = 36"
48 = 48"
60 = 60"
72 = 72"
8
B = Lay-In
LSP50 = 1/2" slot, uninsulated
LSP75 = 3/4" slot, uninsulated
LSP10 = 1" slot, uninsulated
LSPI50 = 1/2" slot, insulated
LSPI75 = 3/4" slot, insulated
LSPI10 = 1" slot, insulated
Linear Slot Mitred Corner Sections
Model Number Frame Type Mitre Angle Number of
Slots End Configuration Paint Finish
HH = Hidden both ends
90 = 90° HO = Hidden / Open
OO = Open both ends
White
1 thru 8
LSMC75 = For 3/4" slot width (use with LS75)
LSMC10 = For 1" slot width (use with LS10) Example: LSMC50 C 90 3 HO
Number of Slots
1 thru 8
LSMC50 = For 1/2" slot width (use with LS50)
A = Surface Mount (screwholes)
C = Surface Mount (concealed)
A = Surface Mount (screwholes)
C = Surface Mount (concealed)
Example: LSP50 B 24 3 8
BG 4 Series Linear Bar Grille/Register (1/4" Centers)BGO-4 (No Damper, Standard Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $20 $27 $28 $38 $41 $51 $56 $67 $68 $79 $86
2" $24 $35 $37 $40 $45 $54 $60 $75 $81 $90 $942 1/2" $30 $39 $42 $44 $52 $59 $67 $84 $87 $100 $105
3" $35 $45 $48 $50 $54 $70 $80 $98 $102 $115 $1243 1/2" $42 $50 $54 $50 $62 $78 $83 $105 $111 $122 $130
4" $47 $60 $63 $49 $68 $77 $90 $112 $114 $129 $1395" $60 $69 $75 $58 $82 $90 $99 $122 $129 $146 $1546" $69 $84 $87 $67 $97 $104 $109 $136 $144 $159 $1718" $84 $92 $100 $113 $122 $132 $148 $161 $168 $187 $19110" $105 $114 $124 $138 $147 $162 $177 $190 $193 $211 $22612" $125 $133 $145 $162 $172 $189 $204 $216 $219 $241 $256
BGOH-4 (No Damper, Heavy Duty Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $27 $37 $39 $51 $56 $68 $75 $91 $92 $106 $115
2" $32 $47 $49 $51 $59 $74 $80 $101 $110 $122 $1292 1/2" $41 $53 $56 $59 $68 $81 $91 $114 $118 $134 $141
3" $47 $61 $64 $67 $74 $93 $107 $133 $137 $157 $1683 1/2" $57 $68 $72 $68 $82 $104 $112 $143 $150 $166 $175
4" $63 $80 $84 $67 $92 $105 $123 $150 $156 $174 $1885" $80 $94 $100 $79 $112 $122 $135 $164 $175 $197 $2086" $94 $114 $118 $90 $131 $139 $146 $184 $194 $213 $2328" $114 $126 $136 $153 $164 $178 $197 $217 $226 $252 $25710" $142 $154 $169 $187 $200 $218 $239 $254 $260 $484 $30612" $170 $180 $196 $219 $233 $253 $276 $291 $297 $324 $347
BGD-4 (With Damper, Standard Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $30 $37 $45 $53 $61 $71 $82 $103 $105 $119 $126
2" $34 $45 $47 $58 $65 $77 $84 $111 $118 $130 $1342 1/2" $39 $49 $51 $63 $72 $82 $93 $118 $124 $140 $145
3" $45 $55 $57 $73 $74 $90 $105 $132 $138 $155 $1643 1/2" $51 $60 $60 $75 $82 $99 $110 $140 $148 $162 $170
4" $57 $70 $65 $78 $88 $100 $117 $146 $153 $169 $1795" $69 $80 $76 $90 $105 $116 $125 $162 $169 $192 $1996" $78 $95 $85 $103 $120 $128 $133 $176 $184 $203 $2178" $94 $105 $116 $135 $145 $159 $175 $201 $211 $235 $23510" $115 $127 $140 $161 $173 $189 $208 $234 $237 $262 $27812" $135 $147 $162 $187 $200 $219 $240 $260 $268 $298 $313
BGDH-4 (With Damper, Heavy Duty Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $36 $47 $58 $64 $76 $89 $101 $125 $129 $146 $155
2" $41 $57 $58 $74 $79 $95 $106 $135 $147 $162 $1692 1/2" $50 $63 $63 $81 $88 $102 $117 $148 $155 $174 $181
3" $56 $71 $74 $89 $94 $114 $133 $167 $174 $197 $2083 1/2" $66 $78 $75 $97 $102 $125 $138 $177 $187 $206 $215
4" $72 $90 $82 $101 $112 $126 $149 $184 $193 $214 $2285" $89 $105 $95 $117 $135 $146 $161 $204 $215 $243 $2546" $103 $125 $108 $133 $154 $163 $172 $224 $234 $259 $2788" $124 $137 $150 $174 $187 $204 $226 $257 $269 $301 $30310" $152 $167 $185 $210 $226 $245 $270 $300 $306 $335 $35712" $180 $194 $213 $243 $262 $283 $310 $337 $346 $381 $404
Height Width
Height Width
Height Width
Height Width
Linear Bar Grille List Prices • Grille Tech Inc. • 10/8/2008 LBG-1
BG 4 Series Linear Bar Grille/Register (1/4" Centers)
Model Number Frame Type Core Types Width Height Fastening Type Finish
42
White
4
A = Screwholes
B = Spring Clips
N = None
480 = 1/8" blade, 0° Deflection
481 = 1/8" blade, 15° Deflection
BGD = Register, with S-OBDH damper
BGO = Grille, no damper
C = Concealed Mounting Brackets
S = Standard duty, 1" margin border (sidewall and ceiling application)
H = Heavy duty, 1" margin border (floor and sill application)
Example: BGD S 480 42 4 N
BG 5 Series Linear Bar Grille/Register (1/2" Centers)BGOHRC Removable Core
BGO-5 and BGOHRC (No Damper, Standard Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $15 $20 $24 $31 $36 $44 $49 $59 $60 $69 $75
2" $18 $26 $29 $33 $39 $48 $52 $66 $71 $79 $832 1/2" $22 $29 $33 $37 $45 $52 $59 $74 $76 $87 $92
3" $26 $33 $38 $44 $48 $61 $70 $86 $89 $101 $1093 1/2" $31 $37 $42 $46 $54 $68 $73 $92 $97 $107 $114
4" $35 $44 $47 $48 $60 $68 $79 $98 $100 $113 $1225" $44 $51 $56 $57 $72 $79 $87 $107 $113 $128 $1356" $51 $62 $65 $66 $85 $91 $95 $119 $126 $139 $1508" $74 $81 $88 $99 $107 $116 $129 $141 $147 $164 $16710" $92 $100 $109 $121 $129 $142 $155 $166 $169 $185 $19812" $110 $117 $127 $142 $151 $165 $179 $189 $192 $211 $225
BGOH-5 and BGOHRC (No Damper, Heavy Duty Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $20 $27 $33 $42 $49 $59 $66 $80 $81 $93 $101
2" $24 $35 $39 $45 $52 $65 $70 $89 $96 $107 $1132 1/2" $30 $39 $44 $50 $60 $71 $80 $100 $103 $117 $124
3" $35 $45 $51 $59 $65 $82 $94 $116 $120 $137 $1473 1/2" $42 $50 $56 $62 $72 $91 $98 $125 $131 $145 $154
4" $47 $59 $63 $65 $81 $92 $107 $132 $136 $153 $1655" $59 $69 $75 $77 $98 $107 $118 $144 $153 $173 $1826" $69 $84 $88 $89 $115 $122 $128 $161 $170 $187 $2038" $100 $110 $119 $134 $144 $156 $173 $190 $198 $221 $22510" $124 $135 $148 $164 $175 $191 $209 $223 $228 $349 $26812" $149 $158 $172 $192 $204 $222 $242 $255 $260 $284 $304
BGD-5 and BGOHRC (With Damper, Standard Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $24 $30 $43 $44 $56 $65 $75 $94 $97 $109 $115
2" $27 $36 $46 $47 $59 $70 $77 $101 $108 $119 $1232 1/2" $31 $39 $50 $51 $65 $74 $85 $108 $113 $127 $132
3" $35 $43 $57 $58 $68 $82 $95 $120 $126 $141 $1493 1/2" $40 $47 $59 $60 $74 $89 $99 $127 $134 $147 $154
4" $44 $54 $61 $65 $80 $90 $105 $132 $138 $153 $1625" $53 $62 $70 $76 $95 $104 $113 $147 $153 $174 $1806" $60 $73 $79 $85 $108 $115 $120 $159 $166 $184 $1968" $84 $93 $103 $121 $130 $142 $157 $181 $190 $212 $21210" $102 $113 $125 $144 $155 $169 $186 $211 $214 $236 $25012" $120 $131 $144 $167 $179 $195 $214 $234 $241 $268 $282
BGDH-5 and BGOHRC (With Damper, Heavy Duty Border)
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $29 $37 $52 $55 $69 $80 $92 $114 $118 $133 $141
2" $33 $45 $58 $60 $72 $86 $96 $123 $133 $147 $1532 1/2" $39 $49 $63 $65 $80 $92 $106 $134 $140 $157 $164
3" $44 $55 $70 $72 $85 $103 $120 $150 $157 $177 $1873 1/2" $51 $60 $75 $78 $92 $112 $124 $159 $168 $185 $194
4" $56 $69 $78 $82 $101 $113 $133 $166 $173 $193 $2055" $68 $80 $90 $95 $121 $131 $144 $184 $193 $219 $2286" $78 $95 $102 $108 $138 $146 $154 $201 $210 $233 $2498" $110 $121 $133 $155 $167 $182 $202 $230 $241 $270 $27110" $134 $148 $164 $187 $201 $218 $240 $269 $274 $300 $31912" $159 $172 $189 $216 $233 $252 $276 $301 $309 $341 $361
Height Width
Height Width
Height Width
Height Width
Linear Bar Grille List Prices • Grille Tech Inc. • 10/8/2008 LBG-2
BG 5 Series Linear Bar Grille/Register (1/2" Centers)
Model Number Frame Type Core Type Width Height Fastening Type Finish
42
W = White
4 S = Clear Anodized
A = Screwholes
B = Spring Clips
N = None
H = Heavy duty, 1" margin border (floor and sill application)
540 = 1/4" blade, 0° Deflection
541 = 1/4" blade, 15° Deflection
S = Standard duty, 1" margin border (sidewall and ceiling application)
HRC = Heavy duty, 1" margin border (floor and sill application), removable core
Example: BGD H 540 42 4 B S
580 = 1/8" blade, 0° Deflection
581 = 1/8" blade, 15° Deflection
BGD = Register, with S-OBDH damperBGO = Grille, no damper
C = Concealed Mounting Brackets
54P = Pencil-proof 5/16" blade, 0° Deflection
Linear Bar Grille Mitred Corner Sections
BGMC90LIST PRICE
1 1/2" $882" $92
2 1/2" $963" $104
3 1/2" $1084" $1165" $1246" $1368" $160
Notes:1. Mitred corner sections are considered inactive.2. For sizes larger than 8", or angles other than 90°, contact factory.3. Air flow direction must be specified for any styles other than 480, 540, 580, or 54P.
$272$320
BGMCSI (Inside Corner) & BGMCSO (Outside Corner)LIST PRICE
$176$184$192$208$216$232
12"
HEIGHT
12"12"
12"
OUTSIDE LEGDIMENSION: 90°
12"
12"$248
BG-4 and BG-5 Series
12"12"
12"
Linear Bar Grille List Prices • Grille Tech Inc. • 8/25/2008 LBG-3
Linear Bar Grille Mitred Corner Sections
Model Number Frame Type Core Type Height Fastening
TypeBGMC90
Airflow Direction Finish
6
White
N = none
54P = 0° Deflection
STD. 90° Inside Corner Outside Corner
BGMC90 BGMCSI BGMCSO
Refer to Drawing No. BG201-A for mitre details.
S = Standard Duty border (1" margin).
H = Heavy duty border (1" margin).
Floor and Sill application
Example: BGMC90 S 581 6 B 1Various Mitres & Models
1 = toward inside corner
0 = toward outside corner
540 = 1/4" blade, 0° Deflection
541 = 1/4" blade, 15° Deflection
Standard Bar Spacing (1/2" on center)
481 = 1/8" blade, 15° Deflection
580 = 1/8" blade, 0° Deflection
581 = 1/8" blade, 15° Deflection
Pencil-proof (1/4" bars, 7/16" on center)
A = screwholes
C = concealed mounting brackets
B = spring clips
Narrow Bar Spacing (1/4" on center)
480 = 1/8" blade, 0° Deflection
FRBG (No Damper) Return Type
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $35 $51 $84 $99 $110 $130 $146 $168 $189 $218 $261
2" $40 $56 $89 $103 $115 $135 $150 $172 $194 $222 $2652 1/2" $44 $60 $92 $107 $123 $139 $155 $176 $198 $227 $270
3" $48 $64 $96 $112 $127 $143 $159 $181 $202 $231 $2743 1/2" $53 $69 $100 $116 $132 $148 $163 $185 $206 $235 $278
4" $57 $73 $104 $120 $122 $152 $166 $189 $211 $240 $2835" $61 $77 $109 $125 $140 $156 $171 $194 $215 $244 $2876" $66 $81 $113 $129 $145 $160 $175 $198 $219 $248 $2918" $70 $86 $117 $133 $149 $165 $179 $202 $224 $252 $29610" $74 $90 $122 $137 $153 $169 $183 $206 $228 $257 $30012" $79 $94 $126 $142 $158 $173 $188 $212 $232 $261 $304
FRBG (With O.B. Damper) Supply Type
12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72"1 1/2" $44 $61 $97 $119 $132 $154 $174 $202 $227 $260 $307
2" $49 $66 $102 $123 $137 $159 $178 $206 $232 $264 $3112 1/2" $53 $70 $105 $127 $145 $163 $183 $210 $236 $269 $316
3" $57 $74 $109 $132 $149 $167 $187 $215 $240 $273 $3203 1/2" $62 $79 $113 $136 $154 $172 $191 $219 $244 $277 $324
4" $66 $83 $117 $140 $144 $176 $194 $223 $249 $282 $3295" $70 $87 $122 $145 $162 $180 $199 $228 $253 $286 $3336" $76 $96 $131 $154 $175 $195 $214 $244 $269 $306 $3538" $80 $101 $135 $158 $179 $200 $218 $248 $274 $310 $35810" $84 $105 $140 $162 $183 $204 $222 $252 $278 $315 $36212" $89 $109 $144 $167 $188 $208 $227 $258 $282 $319 $366
HEI
GH
T
French Riviera Bar Grille/Register (1/2" Center)
Width
HEI
GH
T
Width
Linear Bar Grille List Prices • Grille Tech Inc. • 8/25/2008 LBG-4
V, H Aluminum Single Deflection SupplyAll Products are Rollformed Frame
Model V or H
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 5.76 5.76 6.49 7.21 7.93 8.65 8.65 9.37 10.09 10.81 11.53 12.97 13.69 15.13 15.85 18.01 19.46 20.17 20.90 21.63 22.336" 5.76 6.49 7.21 7.93 8.65 9.37 10.09 10.09 11.53 12.25 12.97 15.13 15.85 17.29 18.01 20.17 22.33 23.06 23.77 24.49 25.228" 6.49 7.21 7.93 8.65 9.37 10.09 10.81 11.53 12.25 13.69 15.13 16.57 18.02 19.46 20.17 20.90 24.49 25.22 25.95 25.95 27.3810" 7.93 8.65 9.37 10.09 11.53 12.25 12.97 13.69 15.85 16.57 18.74 20.18 21.62 23.06 25.95 28.09 28.81 29.54 30.27 31.7012" 9.37 10.09 11.53 12.25 12.97 14.41 15.85 17.29 18.74 20.18 21.62 23.78 25.22 28.09 30.98 32.43 33.15 33.88 34.5714" 11.53 12.97 14.41 15.85 17.29 18.74 20.18 21.62 23.78 25.22 27.38 28.81 32.43 36.02 37.48 38.18 39.64 41.0716" 15.13 16.57 18.02 19.46 20.90 22.34 24.50 25.94 28.10 29.55 31.70 36.02 40.36 41.78 43.23 45.39 46.8318" 18.74 20.18 21.62 23.78 25.22 27.38 29.55 31.71 33.87 35.30 39.64 43.96 46.12 48.28 50.44 52.6020" 22.34 24.50 25.94 28.82 30.27 32.43 34.59 36.75 38.91 43.96 48.28 51.17 53.31 56.20 58.3722" 27.38 29.55 32.43 34.59 36.75 39.63 42.52 44.68 49.71 54.03 56.92 59.79 62.70 65.5624" 31.71 36.03 38.19 41.07 43.96 48.28 50.44 55.49 59.79 62.70 65.56 68.45 71.3426" 38.91 41.07 44.68 48.28 52.60 56.20 61.24 65.56 69.18 72.05 74.93 77.8028" 43.96 48.28 52.60 57.65 61.97 68.45 71.34 74.93 78.53 82.14 85.0130" 52.60 57.65 62.69 67.72 72.77 77.80 81.41 85.01 88.62 91.5132" 61.97 66.30 55.09 79.25 84.30 87.92 91.51 95.12 97.9934" 74.22 81.41 86.46 91.51 95.12 98.72 102.33 105.2036" 87.15 92.94 97.99 101.61 105.20 108.81 112.4138" 99.43 110.23 113.84 118.16 122.49 126.1040" 115.28 119.62 123.94 128.24 131.8542" 125.37 129.69 134.74 139.7944" 135.45 141.95 147.7146" 149.16 152.7548" 158.53
Model VM or HM
8" 10" 12" 14" 16" 18" 20" 22" 24"4" 7.93 8.65 10.09 10.81 11.53 12.25 12.97 14.41 15.856" 8.65 10.09 10.81 12.25 12.97 13.69 15.13 16.57 17.298" 10.09 10.81 12.25 12.97 14.41 15.13 15.85 17.29 18.7410" 11.53 12.97 14.41 15.85 16.57 18.02 19.46 20.9012" 14.41 15.85 17.29 18.74 20.18 21.62 23.0614" 17.29 18.74 21.62 23.06 25.22 26.66
Notes:1. Finish is white unless otherwise specified.2. Fractional sizes available.3. Oversized grilles not available (use EV/EH supply grilles/registers).
HEI
GH
T
WIDTH
HEI
GH
T
WIDTH
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-1
V, H Aluminum Single Deflection Supply
Model Number Width x Height Paint Finish
12 x 6
White (Standard)
V = Grille, vertical blades
H = Grille, horizontal blades
VOB = Register, vertical blades, with S-OBD damper
HOB = Register, horizontal blades, with S-OBD damper
VM = Register, vertical blades, with Multi-Shutter damper
HM = Register, horizontal blades, with Multi-Shutter damper
Example: VM 1206
VOB, HOB Aluminum Single Deflection Supply With Opposed Blade Damper
Model VOB or HOB
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 9.73 11.36 12.17 13.79 14.60 15.41 17.04 17.85 19.47 20.28 22.71 24.34 25.96 27.58 29.20 34.07 34.88 36.50 37.31 38.94 40.566" 11.36 12.17 13.79 14.60 16.22 17.85 18.66 19.47 21.90 23.52 26.77 29.20 30.01 30.83 35.69 38.13 38.94 40.56 42.18 43.80 45.438" 12.17 13.79 15.41 16.22 17.85 18.66 20.28 21.90 23.52 25.15 28.39 30.83 33.26 34.88 37.31 42.18 42.99 44.62 44.62 48.66 50.29
10" 14.60 16.22 17.85 20.28 21.90 22.71 24.34 26.77 28.39 31.64 34.07 36.50 38.94 42.18 47.86 48.67 50.29 51.11 53.54 55.1612" 17.85 19.47 21.09 23.52 25.15 26.77 29.20 30.83 34.07 37.31 40.56 42.99 46.24 52.73 54.35 55.97 58.41 60.03 61.6514" 21.90 24.34 26.77 28.39 30.83 34.07 36.50 39.75 42.99 46.24 48.67 51.92 59.22 61.65 64.08 66.52 68.95 71.3816" 27.58 30.01 33.26 35.69 38.94 41.37 44.62 47.86 51.92 55.16 58.41 64.90 68.14 71.38 75.44 78.69 81.9318" 34.07 38.13 39.75 42.99 46.24 50.29 53.54 57.59 61.65 64.90 71.38 75.44 79.50 83.55 88.42 91.6620" 42.99 44.62 47.86 51.11 55.16 59.22 63.27 67.33 71.38 77.87 82.74 87.61 92.48 97.34 102.2122" 48.67 53.54 58.41 63.27 67.33 72.20 77.06 81.93 88.42 94.10 99.78 105.45 110.32 116.0024" 58.41 64.08 69.76 74.63 81.12 86.80 92.48 98.97 103.83 109.51 114.38 120.06 124.9226" 68.95 76.25 82.74 89.23 95.72 103.02 109.51 115.19 120.87 126.55 131.41 137.0928" 74.63 89.23 97.34 105.45 113.57 120.06 126.55 132.22 137.90 143.58 149.2630" 95.72 105.45 115.19 124.11 131.41 137.09 142.77 149.26 154.94 160.6232" 113.57 124.92 136.28 143.58 149.26 154.94 161.43 167.11 173.6034" 134.66 148.45 155.75 161.43 167.11 173.60 179.27 185.7636" 161.43 167.92 174.80 180.08 185.76 191.44 197.9338" 176.84 184.95 191.44 197.93 205.23 211.7240" 193.87 201.18 208.48 214.97 222.2742" 210.10 218.21 227.13 235.2544" 232.00 238.49 249.0446" 248.22 257.9648" 267.69
Notes:1. Finish is white unless otherwise specified.2. Height cannot be fractional.3. Oversized grilles not available (use EV/EH supply grilles/registers).
WIDTH
HEI
GH
T
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-2
V, H Aluminum Single Deflection Supply
Model Number Width x Height Paint Finish
12 x 6
White (Standard)
V = Grille, vertical blades
H = Grille, horizontal blades
VOB = Register, vertical blades, with S-OBD damper
HOB = Register, horizontal blades, with S-OBD damper
VM = Register, vertical blades, with Multi-Shutter damper
HM = Register, horizontal blades, with Multi-Shutter damper
Example: VM 1206
VH, HV, VHOB, HVOB Aluminum Double Deflection SupplyAll Products are Rollformed Frame
Model VH or HV
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" $14 $15 $16 $18 $18 $19 $22 $23 $23 $26 $27 $29 $33 $35 $37 $396" $16 $16 $18 $18 $19 $22 $23 $26 $26 $29 $31 $33 $37 $39 $43 $458" $18 $19 $19 $22 $23 $26 $27 $29 $31 $35 $37 $41 $45 $47 $5010" $19 $22 $23 $26 $29 $31 $31 $35 $39 $43 $46 $49 $53 $5612" $23 $26 $29 $31 $33 $37 $39 $43 $46 $50 $54 $58 $6214" $29 $33 $37 $39 $43 $45 $49 $54 $58 $58 $66 $72
Model VHOB or HVOB
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" $19 $19 $20 $20 $24 $25 $25 $29 $30 $32 $35 $37 $39 $41 $44 $476" $20 $20 $20 $24 $25 $27 $30 $30 $32 $35 $39 $43 $45 $48 $51 $548" $20 $23 $25 $27 $30 $32 $33 $35 $41 $45 $47 $50 $53 $56 $5910" $25 $27 $30 $32 $35 $37 $41 $42 $49 $53 $56 $59 $62 $6512" $30 $32 $35 $39 $41 $46 $47 $54 $58 $62 $65 $68 $7114" $37 $41 $46 $47 $51 $56 $58 $66 $72 $75 $78 $81
Notes:1. Finish is white unless otherwise specified.2. Height cannot be fractional on OB models.3. Oversized grilles not available (use EV/EH supply grilles/registers).
HEI
GH
TH
EIG
HT
WIDTH
WIDTH
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-3
VH, HV, VHOB, HVOB Aluminum Double Deflection Supply
Model Number Width x Height Paint Finish
12 x 6
White (Standard)
VH = Grille, vertical front blades
HV = Grille, horizontal front blades
VHOB = Register, vertical front blades, with S-OBD damper
HVOB = Register, horizontal front blades, with S-OBD damper
Example: VHOB 1206
EV, EH, EVOB, EHOB Extruded Aluminum FrameModel EV or EH
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 10.46 11.27 11.27 12.07 12.07 13.68 15.29 16.10 16.10 17.71 18.51 20.12 23.34 24.15 25.76 26.56 33.81 34.61 37.03 37.83 39.44 41.056" 10.46 11.27 12.07 12.88 13.68 15.29 16.10 17.71 17.71 20.12 21.73 23.34 25.76 26.56 29.78 31.39 37.83 39.44 41.05 41.86 43.47 45.888" 12.07 12.88 13.68 15.29 16.10 17.71 18.51 20.12 21.73 24.15 25.76 28.98 31.39 33.00 34.61 41.05 43.47 45.08 45.88 47.49 49.1010" 13.68 15.29 16.10 17.71 20.12 21.73 21.73 24.15 26.56 29.78 32.20 33.81 37.03 39.44 45.88 47.49 49.10 49.91 51.52 53.9312" 16.10 17.71 20.12 21.73 23.34 25.76 26.56 29.78 32.20 34.61 37.83 40.25 42.66 49.91 51.52 53.13 53.93 57.15 59.5714" 20.12 23.34 25.76 26.56 29.78 31.39 33.81 37.83 40.25 40.25 45.88 49.91 56.35 58.76 61.18 64.40 66.01 69.2316" 25.76 28.98 31.39 33.81 37.03 39.44 41.86 47.49 48.30 53.13 55.54 63.59 66.01 69.23 71.64 74.86 77.2818" 32.20 34.61 37.83 40.25 45.08 47.49 50.71 53.93 57.96 61.98 71.64 74.06 77.28 80.50 84.52 87.7420" 39.44 41.86 45.08 48.30 53.13 55.54 61.18 63.59 66.81 77.28 81.30 86.13 90.16 93.38 97.4022" 45.88 50.71 55.54 61.18 64.40 69.23 72.45 78.08 86.94 90.96 94.99 99.01 103.04 107.8724" 55.54 61.18 66.01 71.64 77.28 82.11 87.74 16.90 100.62 104.65 107.87 112.70 113.5026" 64.40 74.06 78.08 85.33 91.77 99.01 107.06 110.28 113.50 118.33 121.55 126.3828" 77.28 85.33 91.77 99.82 107.87 118.33 120.75 124.77 127.19 131.21 136.0430" 91.77 99.82 109.48 118.33 130.41 132.02 136.04 137.65 140.87 144.8932" 107.87 118.33 131.21 140.87 143.28 146.50 148.92 152.14 153.7534" 127.99 141.67 152.94 153.75 156.97 160.19 162.60 165.8236" 152.94 165.02 166.63 168.24 171.46 173.07 177.09
Model EVOB or EHOB
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 16.10 16.90 17.71 19.32 19.32 21.73 23.34 24.15 24.95 28.17 32.20 33.81 38.64 40.25 41.86 42.66 49.91 50.71 53.93 56.35 58.76 61.986" 16.10 16.90 17.71 20.12 21.73 23.34 24.95 26.56 28.17 30.59 37.03 39.44 41.86 42.66 48.30 49.91 56.35 57.96 60.37 62.79 64.40 66.818" 17.71 20.12 21.73 23.34 24.95 26.56 28.98 30.59 33.00 40.25 41.86 45.88 49.91 52.32 53.13 60.37 64.40 66.01 66.81 69.23 72.4510" 20.93 23.34 24.95 26.56 30.59 32.20 33.00 37.03 43.47 48.30 50.71 52.32 57.96 60.37 66.81 68.42 70.84 73.25 75.67 78.8912" 24.15 26.56 30.59 33.00 34.61 38.64 40.25 46.69 50.71 53.93 58.76 63.59 66.01 73.25 74.86 77.28 78.89 83.72 86.9414" 36.22 40.25 44.27 45.88 50.71 53.13 65.20 70.03 73.25 74.86 83.72 86.94 94.18 98.21 101.43 105.45 108.67 112.7016" 44.27 47.49 52.32 54.74 60.37 71.64 74.06 74.06 85.33 92.57 92.57 103.04 107.06 110.28 112.70 118.33 123.1618" 51.52 55.54 59.57 64.40 78.08 82.11 86.13 90.96 98.21 101.43 111.89 115.11 119.94 123.97 130.41 136.0420" 60.37 65.20 70.03 82.91 90.16 92.57 98.21 104.65 107.87 118.33 122.36 129.60 136.04 141.67 148.1122" 70.03 77.28 90.16 98.21 102.23 108.67 115.92 121.55 130.41 134.43 140.87 147.31 153.75 160.9924" 82.91 95.79 103.04 111.09 118.33 127.99 133.63 143.28 146.50 152.94 158.58 165.82 169.0426" 112.70 122.36 131.21 140.87 152.94 158.58 168.24 172.26 177.90 185.14 190.78 198.0228" 141.67 152.14 160.99 175.48 181.12 194.00 198.83 205.27 210.10 216.54 223.7830" 155.36 164.21 177.09 189.97 207.68 205.27 213.32 218.15 222.17 227.8132" 181.12 196.41 204.46 218.95 226.20 229.42 231.83 239.88 245.5234" 198.02 214.93 232.64 229.42 236.66 243.10 246.32 251.1536" 231.03 245.52 249.54 253.57 259.20 264.84 273.69
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples with a $25 List Add per joint.3. Sizes larger than shown require crating, 15% List Add ($56 minimum List).4. Lay-in grilles are always specified by grid size required.5. 25% List Add for reverse sizes.
HEI
GH
TH
EIG
HT
WIDTH
WIDTH
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 8/25/2008 AS-4
EV, EH, EVOB, EHOB Extruded Aluminum Frame
Model Number Width x Height Paint Finish
12 x 6
White (Standard)
EV = Grille, vertical blades
EH = Grille, horizontal blades
EVOB = Register, vertical blades, with S-OBD damper
EHOB = Register, horizontal blades, with S-OBD damper
Example: EVOB 1206
EVH, EHV, EVHOB, EHVOB Extruded Aluminum Frame
Model EVH or EHV
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $20 $20 $20 $22 $22 $24 $27 $29 $29 $32 $34 $37 $42 $44 $47 $49 $61 $63 $66 $69 $71 $746" $20 $20 $22 $23 $24 $27 $29 $32 $32 $37 $39 $42 $47 $49 $54 $56 $68 $71 $74 $76 $79 $838" $22 $23 $24 $27 $29 $32 $34 $37 $39 $44 $47 $52 $56 $59 $63 $74 $79 $81 $83 $85 $8810" $24 $27 $29 $32 $37 $39 $39 $44 $49 $54 $58 $61 $66 $71 $83 $85 $88 $90 $93 $9812" $29 $32 $37 $39 $42 $47 $49 $54 $58 $63 $68 $73 $78 $90 $93 $95 $98 $103 $10814" $37 $42 $47 $49 $54 $56 $61 $68 $73 $73 $83 $90 $102 $106 $110 $115 $119 $12516" $47 $52 $56 $61 $66 $71 $76 $71 $87 $95 $100 $115 $119 $129 $129 $135 $13918" $58 $63 $68 $73 $81 $85 $92 $97 $105 $112 $129 $134 $139 $144 $153 $15820" $71 $76 $81 $87 $95 $100 $110 $115 $121 $139 $146 $154 $162 $168 $17522" $83 $92 $100 $110 $117 $124 $131 $141 $156 $164 $171 $178 $185 $19524" $100 $110 $119 $129 $139 $148 $158 $175 $182 $188 $195 $203 $20426" $117 $129 $141 $153 $165 $178 $193 $198 $205 $212 $219 $22728" $139 $153 $165 $180 $194 $212 $218 $225 $229 $236 $24530" $165 $180 $197 $213 $235 $238 $245 $248 $254 $26232" $194 $213 $236 $254 $258 $264 $268 $274 $27734" $231 $255 $276 $277 $283 $289 $293 $29936" $276 $297 $301 $303 $308 $312 $318
Model EVHOB or EHVOB
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $27 $27 $27 $31 $31 $34 $37 $39 $40 $45 $51 $54 $61 $64 $67 $69 $81 $83 $87 $92 $95 $1006" $27 $27 $29 $32 $34 $37 $40 $43 $45 $50 $58 $62 $67 $69 $77 $79 $91 $94 $98 $102 $105 $1098" $29 $32 $34 $37 $40 $43 $47 $50 $53 $64 $67 $73 $79 $83 $86 $98 $105 $107 $109 $112 $11710" $33 $37 $40 $43 $50 $52 $53 $60 $70 $77 $81 $84 $92 $97 $109 $111 $115 $119 $123 $12912" $39 $43 $50 $53 $56 $63 $66 $75 $81 $87 $94 $102 $107 $119 $122 $125 $129 $136 $14214" $57 $63 $70 $73 $80 $83 $100 $108 $114 $116 $130 $136 $149 $155 $160 $166 $172 $17916" $70 $75 $82 $87 $95 $111 $116 $124 $133 $144 $146 $164 $170 $176 $180 $189 $19618" $82 $89 $95 $103 $122 $128 $136 $143 $155 $161 $179 $185 $192 $198 $210 $21820" $97 $105 $112 $130 $141 $146 $156 $166 $172 $190 $197 $208 $219 $228 $23822" $113 $125 $143 $156 $164 $173 $185 $195 $210 $218 $228 $238 $248 $26124" $134 $153 $165 $178 $190 $205 $215 $232 $239 $248 $258 $269 $27326" $177 $192 $207 $222 $241 $252 $269 $275 $285 $295 $305 $31628" $219 $236 $251 $274 $285 $306 $315 $325 $332 $342 $35430" $244 $260 $281 $302 $331 $329 $341 $348 $355 $36532" $285 $310 $327 $351 $361 $367 $371 $383 $39134" $318 $346 $375 $371 $382 $392 $397 $40536" $373 $397 $404 $409 $417 $426 $438
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples with a $25 List Add per joint.3. Sizes larger than shown require crating, 15% List Add ($56 minimum List).4. Lay-in grilles are always specified by grid size required.5. 25% List Add for reverse sizes.
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 8/25/2008 AS-5
EVH, EHV, EVHOB, EHVOB Extruded Aluminum Frame
Model Number Width x Height Paint Finish
12 x 6
White (Standard)
EVH = Grille, vertical front blades
EHV = Grille, horizontal front blades
EVHOB = Register, vertical front blades, with S-OBD damper
EHVOB = Register, horizontal front blades, with S-OBD damper
Example: EVHOB 1206
CL, CS Curved Blade Supply Grilles and RegistersModels CLCL, CLCR, CL3, CL4, and CS4
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $17 $17 $19 $19 $21 $24 $26 $26 $28 $286" $19 $19 $19 $21 $23 $24 $28 $28 $30 $368" $19 $23 $24 $28 $28 $30 $30 $34 $38
10" $26 $28 $30 $30 $32 $34 $38 $4112" $32 $32 $34 $34 $36 $41 $4514" $36 $38 $40 $43 $49 $5116" $43 $45 $47 $53 $5618" $49 $55 $62 $7020" $62 $72 $7922" $83 $8824" $94
Models CLCLOB, CLCROB, CL3OB, CL4OB and CS4OB (with Opposed Blade Damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $24 $24 $26 $28 $30 $34 $36 $36 $39 $416" $26 $26 $26 $30 $33 $34 $39 $39 $43 $498" $26 $32 $34 $38 $39 $41 $43 $47 $52
10" $34 $38 $41 $41 $45 $47 $52 $5712" $42 $43 $47 $48 $50 $57 $6214" $56 $59 $63 $67 $75 $7816" $66 $68 $73 $79 $8518" $73 $81 $89 $10020" $88 $101 $11022" $113 $12124" $128
Models CL1, CS1, CL2 and CS2
6 8 10 12 14 16 18 20 22 244" $12 $12 $13 $13 $15 $19 $21 $21 $23 $256" $13 $13 $13 $15 $17 $19 $23 $23 $25 $298" $15 $17 $19 $21 $23 $25 $25 $27 $31
10" $19 $21 $23 $25 $27 $29 $31 $3312" $23 $25 $27 $29 $31 $33 $3514" $27 $31 $35 $36 $38 $4216" $35 $38 $40 $42 $4818" $42 $46 $48 $5420" $52 $54 $5922" $61 $6724" $73
Notes:1. Height cannot be fractional on OB models.2. Oversized Grilles, divide into equal sections from the price sheet. Take List price of grilles and add $25 list for each joint.3. The TB border may only be used when nominal neck is 2" less than T-Bar ceiling. A 22 x 22" grille fits a 24 x 24" module.
Optional Aluminum Panel
$40$40
24 x 12"24 x 24"
20 x 8"20 x 20"
HEI
GH
T
WIDTH
HEI
GH
T
List AddPanel Size
WIDTH
WIDTH
HEI
GH
T
Maximum Grille Size
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-6
CL, CS Curved Blade Supply Grilles & Registers
Model Number Frame Type Width x Height Panel Size
(For TBP border only) Paint Finish
12 x 12 White (Standard)
Surface (Standard)T = T-bar lay-in (full face)6A = T-bar lay-in (panel)
CS3D
CL4D
CS4D
Example: CL3D 6A 1212 2424
CL, CS Air Patterns (Face View)
CS2D
CLCLD
CLCRD
CL3D
Registers (with S-OBD damper)
CL1D
CS1D
CL2D
2424 = 24 x 24 panel (20 x 20 maximum grille size)
Grilles, No dampers
CL1
CS1
CL2
CS2
CLCL
CS4
CLCR
CL3
CS3
CL4
CL, CS Curved Blade Supply Registers, Multi-Shutter
CL1M, CL2M, CS1M and CS2M
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" 6.09 6.76 6.76 7.44 10.14 10.82 11.50 11.50 13.53 14.20 14.88 16.91 17.58 18.26 20.296" 7.44 6.76 7.44 8.12 8.79 11.50 10.82 12.85 15.56 15.56 16.91 18.94 19.61 20.97 23.008" 8.12 9.47 10.14 10.82 12.17 12.85 13.53 14.20 16.91 16.91 18.94 21.64 22.32 23.67 25.70
10" 10.14 10.82 12.17 13.53 14.88 14.88 16.23 18.26 18.94 20.97 23.00 24.35 26.38 27.7312" 12.17 13.53 14.88 16.23 16.91 18.26 19.61 20.97 23.00 25.70 27.05 29.08 31.7914" 15.56 16.91 18.26 20.97 20.97 23.00 24.35 26.38 28.41 31.11 33.14 35.1716" 18.94 19.61 22.32 23.67 25.70 27.05 30.43 32.46 35.17 37.20 39.2318" 23.00 25.70 26.38 29.76 31.11 33.82 37.20 38.55 41.26 44.6420" 28.41 29.76 31.79 34.49 37.20 39.90 44.64 45.31 48.0222" 33.14 36.52 39.23 42.61 45.31 48.02 52.08 54.7824" 39.90 42.61 47.34 51.40 54.11 58.16 63.5726" 45.99 50.72 55.46 60.19 64.25 68.9928" 54.78 59.52 64.93 71.01 76.4330" 65.60 72.37 77.78 85.8932" 76.43 83.86 91.9834" 90.63 100.1036" 110.92
CL3M, CL4M
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" 8.55 9.32 10.88 11.65 13.21 16.32 17.09 18.65 20.20 20.20 20.98 25.64 27.19 28.75 29.526" 10.88 10.88 11.65 13.21 13.99 17.09 17.87 18.65 21.76 21.76 23.31 27.97 28.75 30.30 31.088" 12.43 13.99 15.54 17.09 18.65 19.42 19.42 20.20 23.31 23.31 24.86 29.52 30.30 31.86 41.96
10" 15.54 17.09 18.65 20.20 20.20 20.98 21.76 24.09 26.42 27.19 31.75 34.19 36.52 41.9612" 18.65 20.20 22.53 24.09 25.64 26.42 29.52 30.30 31.86 36.40 37.29 38.85 46.6214" 22.53 24.86 25.64 27.97 28.75 32.63 34.19 36.52 40.40 42.73 45.84 48.1716" 27.97 28.75 30.30 32.63 34.96 37.29 41.96 44.29 48.17 51.28 54.3918" 34.19 38.07 36.52 43.51 44.29 46.62 55.94 53.61 54.39 66.8220" 41.96 42.73 44.29 47.40 51.28 58.27 62.16 62.93 71.4822" 45.06 49.73 54.39 59.05 62.93 66.04 71.48 76.1424" 59.83 60.60 64.49 76.92 75.37 80.03 94.7926" 63.71 69.93 79.25 83.14 89.35 95.5728" 75.37 82.36 90.13 97.90 105.6730" 98.68 100.23 106.45 128.2032" 105.67 112.66 134.4234" 132.09 147.6236" 163.16
Notes:1. Fractional sizes available.2. Oversized Grilles, divide into equal sections from the price sheet. Take List price of grilles and add $25 list for each joint.3. The TB border may only be used when nominal neck is 2" less than T-Bar ceiling. A 22 x 22" grille fits a 24 x 24" module.
Optional Aluminum Panel
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
24 x 24" 20 x 20" $40
Panel Size Maximum Grille Size List Add24 x 12" 20 x 8" $40
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-7
CL, CS Curved Blade Supply Registers, Multi-Shutter
Model Number Frame Type Width x Height Panel Size
(For TP border only) Paint Finish
12 x 12 White (Standard)
Surface (Standard)T = T-bar lay-in (full face)6A = T-bar lay-in (panel)
CL4OB
2424 = 24 x 24 panel (20 x 20 maximum grille size)
Example: CL1M 1212
CL, CS Air Patterns (Face View)
CL1OB
CL3OB
Registers (with multi-shutter damper)
CL4M
CL2M
CL1M
CS1M
Registers (with S-OBD damper)
CL2OB
CS2M
CLCLM
CL3M
CL, CS Curved Blade Supply Registers With Opposed Blade Damper
CL1OB, CL2OB
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" 11.47 13.00 13.77 14.53 16.06 19.12 21.42 22.95 24.48 26.01 26.77 29.07 30.60 33.66 35.956" 15.30 16.06 16.06 16.06 17.59 20.65 22.18 24.48 26.01 28.30 30.60 32.89 34.42 37.48 40.548" 16.06 17.59 17.59 19.89 22.18 23.71 24.48 26.01 28.30 30.60 32.89 35.95 38.24 42.07 44.3610" 19.89 21.42 23.71 25.24 26.77 27.54 29.83 32.13 32.89 33.66 39.01 43.60 46.66 48.9512" 23.71 26.01 28.30 30.60 32.13 33.66 35.19 38.24 41.30 46.66 46.66 50.48 54.3114" 28.30 30.60 32.89 35.95 38.24 41.30 44.36 47.42 51.25 55.84 59.66 63.4916" 34.42 37.48 39.77 42.83 45.89 48.19 50.48 56.60 62.72 66.55 69.6118" 40.54 45.89 50.48 52.78 57.37 61.96 65.78 69.61 74.96 80.3120" 51.25 55.07 58.13 63.49 68.08 72.67 79.55 85.67 91.7922" 59.66 65.02 70.37 75.72 80.31 84.90 91.79 98.6724" 71.90 76.49 80.31 87.96 94.85 104.79 114.7326" 82.61 84.90 96.38 107.85 118.56 128.5028" 94.08 105.56 116.26 129.27 141.5130" 114.73 126.21 140.74 154.5132" 146.10 160.63 168.2834" 168.28 183.5736" 200.40
CL3OB, CL4OB
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"4" 13.77 15.30 16.83 17.59 19.89 24.48 26.01 26.77 29.07 30.60 32.89 36.71 39.01 41.30 42.836" 17.59 17.59 19.12 19.89 21.42 26.01 27.54 29.07 32.13 34.42 37.48 42.07 43.60 46.66 48.958" 19.12 19.12 22.95 24.48 26.77 28.30 30.60 32.13 34.42 37.48 42.07 45.89 48.95 52.01 54.3110" 23.71 26.01 27.54 30.60 32.13 34.42 35.19 39.01 42.83 46.66 50.48 54.31 58.13 62.7212" 28.30 30.60 33.66 35.95 38.24 40.54 42.07 46.66 51.25 53.54 60.43 65.02 65.7814" 32.89 35.19 40.54 43.60 46.66 49.72 54.31 59.66 64.25 68.84 73.43 78.0216" 41.30 45.13 48.95 52.78 56.60 61.96 67.31 71.90 77.25 81.84 87.9618" 50.48 55.07 59.66 64.25 69.61 74.96 81.08 86.43 97.79 97.1420" 61.96 66.55 71.14 76.49 81.84 88.73 94.85 100.20 107.0922" 73.43 80.31 87.96 94.85 100.97 108.62 115.50 122.3824" 87.20 95.61 104.03 112.44 120.85 129.27 138.4526" 105.50 113.20 123.15 133.86 143.80 154.5128" 121.62 133.86 145.33 158.33 169.8130" 143.80 458.33 172.10 186.6332" 170.57 187.40 204.2334" 202.70 222.5836" 240.94
Notes:1. Height cannot be fractional on OB models.2. Oversized Grilles, divide into equal sections from the price sheet. Take List price of grilles and add $25 list for each joint.3. The TB border may only be used when nominal neck is 2" less than T-Bar ceiling. A 22 x 22" grille fits a 24 x 24" module.
Optional Aluminum Panel
24 x 12" 20 x 8" $4024 x 24" 20 x 20" $40
Panel Size Maximum Grille Size List Add
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-8
CL, CS Curved Blade Supply Registers, Multi-Shutter
Model Number Frame Type Width x Height Panel Size
(For TP border only) Paint Finish
12 x 12 White (Standard)
Surface (Standard)T = T-bar lay-in (full face)6A = T-bar lay-in (panel)
CL4OB
2424 = 24 x 24 panel (20 x 20 maximum grille size)
Example: CL1M 1212
CL, CS Air Patterns (Face View)
CL1OB
CL3OB
Registers (with multi-shutter damper)
CL4M
CL2M
CL1M
CS1M
Registers (with S-OBD damper)
CL2OB
CS2M
CLCLM
CL3M
CL, CS Curved Blade Supply Grilles and RegistersSecondary Airflow Adjustments for Use With CL and CS Series
CL1V, CS1H, CL2V, CS2H Supply Grille (no damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $18 $18 $20 $20 $22 $26 $28 $28 $30 $306" $20 $20 $20 $22 $24 $26 $30 $30 $32 $388" $22 $24 $26 $30 $30 $32 $32 $36 $4010" $28 $30 $32 $32 $34 $36 $40 $4412" $34 $34 $36 $36 $38 $44 $4814" $38 $40 $42 $46 $52 $5416" $46 $48 $50 $56 $6018" $52 $58 $66 $7420" $66 $76 $8422" $88 $9424" $100
CL1VD, CS1HD, CL2VD, CS2HD Supply Register (with Opposed Blade Damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $26 $26 $28 $28 $32 $36 $38 $40 $42 $426" $28 $28 $28 $32 $34 $36 $42 $42 $44 $528" $30 $34 $36 $40 $42 $44 $46 $50 $5610" $38 $40 $44 $44 $48 $50 $56 $6012" $46 $46 $50 $52 $54 $62 $6614" $52 $56 $60 $64 $72 $7216" $64 $66 $70 $78 $8418" $74 $82 $92 $10220" $92 $104 $11422" $120 $12824" $136
Optional Aluminum Panel
Notes:1. Height cannot be fractional on OB models.2. A 22 x 22" grille fits a 24 x 24" module.
HEI
GH
T
WIDTH
WIDTH
HEI
GH
T
Panel Size Maximum Grille Size List Add24 x 12" 20 x 8"24 x 24" 20 x 20"
$40$40
Aluminum Supply Grille and Register List Prices • Grille Tech Inc. • 10/8/2008 AS-9
CL, CS Curved Blade Supply Grilles & RegistersSecondary Airflow Adjustments for Use With CL and CS Series
Model Number Frame Type Width x Height Panel Size
(For TBP border only) Paint Finish
12 x 12 White (Standard)
Surface (Standard)T = T-bar lay-in (full face)6A = T-bar lay-in (panel)
All models with opposed blade damper are designed to be adjusted with a screwdriver through the face
CL2V: Model CL2 with set of vertical adjustable airfoil blades (V Blades) directly behind curved bladesCS2H: Model CS2 with set of horizontal adjustable airfoil blades (H Blades) directly behind curved blades
Registers (with S-OBD damper)
CL1VD: Model CL1V with an S-OBD damper adjustable through register face
CS1HD: Model CS1H with an S-OBD damper adjustable through register face
Example: CL1V 6A 1212 2424
CL, CS Air Patterns (Face View)
2424 = 24 x 24 panel (20 x 20 maximum grille size)
CS2HD: Model CS2H with an S-OBD damper adjustable through register face
CL2VD: Model CL2V with an S-OBD damper adjustable through register face
Ceiling Supply Grilles (no damper)
CL1V: Model CL1 with set of vertical adjustable airfoil blades (V Blades) directly behind curved bladesCS1H: Model CS1 with set of horizontal adjustable airfoil blades (H Blades) directly behind curved blades
RA Aluminum Louvered Face Grilles & RegistersModel RA
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 6.49 6.49 7.30 8.11 8.92 9.73 9.73 10.55 11.36 12.17 12.98 14.60 15.41 17.04 17.85 20.28 21.90 22.71 23.52 24.34 25.156" 6.49 7.30 8.11 8.92 9.73 10.55 11.36 11.36 12.98 13.79 14.60 17.04 17.85 19.47 20.28 22.71 25.15 25.96 26.77 27.58 28.398" 7.30 8.11 8.92 9.73 10.55 11.36 12.17 12.98 13.79 15.41 17.04 18.66 20.28 21.90 22.71 23.52 27.58 28.39 29.20 29.20 30.8310" 8.92 9.73 10.55 11.36 12.98 13.79 14.60 15.41 17.85 18.66 21.09 22.71 24.34 25.96 29.20 31.64 32.45 33.26 34.07 35.6912" 10.55 11.36 12.98 13.79 14.60 16.22 17.85 19.47 21.09 22.71 24.34 26.77 28.39 31.64 34.88 36.50 37.31 38.13 38.9414" 12.98 14.60 16.22 17.85 19.47 21.09 22.71 24.34 26.77 28.39 30.83 32.45 36.50 40.56 42.18 42.99 44.62 46.2416" 17.04 18.66 20.28 21.90 23.52 25.15 27.58 29.20 31.64 33.26 35.69 40.56 45.43 47.05 48.67 51.11 52.7318" 21.09 22.71 24.34 26.77 28.39 30.83 33.26 35.69 38.13 39.75 44.62 49.48 51.92 54.35 56.78 59.2220" 25.15 27.58 29.20 32.45 34.07 36.50 38.94 41.37 43.80 49.48 54.35 57.59 60.03 63.27 65.7122" 30.83 33.26 36.50 38.94 41.37 44.62 47.86 50.29 55.97 60.84 64.08 67.33 70.57 73.8224" 35.69 40.56 42.99 46.24 49.48 54.35 56.78 62.46 67.33 70.57 73.82 77.06 80.3126" 43.80 46.24 50.29 54.35 59.22 63.27 68.95 73.82 77.87 81.12 84.36 87.6128" 49.48 54.35 59.22 64.90 69.76 77.06 80.31 84.36 88.42 92.48 95.7230" 59.22 64.90 70.57 76.25 81.93 87.61 91.66 95.72 99.78 103.0232" 69.76 74.63 83.55 89.23 94.91 98.97 103.02 107.08 110.3234" 83.55 91.66 97.34 103.02 107.08 111.13 115.19 118.4336" 98.97 104.64 110.32 114.38 118.43 122.49 126.5538" 111.94 124.11 128.17 133.04 137.90 141.9640" 129.79 134.66 139.52 144.39 148.4542" 141.15 146.01 151.69 157.3744" 152.50 159.80 166.2946" 167.92 171.9748" 178.46
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples with a $25 List Add per joint.3. 25% List Add for reverse sizes.4. Fractional sizes available.5. T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.
HEI
GH
T
WIDTH
24 x 24" 20 x 20" $40
Panel Size Maximum Grille Size List Add24 x 12" 20 x 8" $40
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 10/9/2008 AR-1
RA, RAOB Aluminum Louvered Face Grilles & Registers
Model Number Frame Type Width x Height (nominal) Paint Finish
Surface (standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *
12 x 12
White (standard)
Example: RA 1212 RAT 1212
* For T-bar lay-in (panel), panel size = 24" x 24". Maximum grille size is 20" x 20".
RA = Return Grille
RAOB = Return Register, with S-OBD damper
RAOB Aluminum Louvered Face Grilles & RegistersModel RAOB (with Opposed Blade Damper)
8" 10" 12" 14" 16" 18" 20" 22" 24" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $19 $19 $23 $23 $25 $27 $28 $29 $33 $40 $45 $47 $49 $50 $58 $59 $62 $65 $68 $726" $19 $21 $23 $25 $27 $29 $31 $33 $36 $46 $49 $50 $56 $58 $65 $67 $70 $73 $75 $778" $21 $23 $25 $27 $29 $31 $34 $36 $38 $49 $53 $58 $61 $62 $70 $75 $76 $77 $80 $84
10" $24 $27 $29 $31 $36 $37 $38 $43 $56 $59 $61 $67 $70 $77 $79 $82 $85 $88 $9112" $28 $31 $36 $38 $40 $45 $47 $59 $63 $68 $74 $77 $85 $87 $89 $91 $97 $10114" $43 $47 $52 $54 $59 $62 $82 $86 $88 $98 $102 $110 $114 $118 $122 $127 $13116" $52 $55 $61 $64 $70 $87 $87 $100 $108 $108 $120 $125 $128 $131 $137 $14318" $60 $65 $69 $75 $96 $101 $106 $115 $118 $130 $134 $139 $143 $151 $15820" $70 $76 $81 $105 $108 $114 $122 $126 $137 $141 $149 $157 $164 $17122" $81 $90 $114 $119 $126 $135 $141 $151 $155 $163 $170 $178 $18624" $96 $120 $129 $137 $149 $155 $165 $169 $176 $183 $191 $19526" $143 $153 $164 $178 $184 $195 $199 $207 $214 $222 $22928" $166 $178 $188 $205 $211 $225 $231 $239 $244 $252 $26030" $181 $191 $206 $221 $241 $238 $247 $254 $258 $26532" $211 $229 $237 $254 $262 $266 $269 $278 $28534" $230 $249 $269 $265 $274 $281 $285 $29136" $268 $284 $289 $293 $300 $307 $317
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples with a $25 List Add per joint.3. 25% List Add for reverse sizes.4. Height cannot be fractional.5. T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.
24 x 24" 20 x 20" $4020 x 8" $40
WIDTH
HEI
GH
T
Panel Size Maximum Grille Size List Add24 x 12"
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 10/9/2008 AR-2
RA, RAOB Aluminum Louvered Face Grilles & Registers
Model Number Frame Type Width x Height (nominal) Paint Finish
Surface (standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *
12 x 12
White (standard)
Example: RA 1212 RAT 1212
* For T-bar lay-in (panel), panel size = 24" x 24". Maximum grille size is 20" x 20".
RA = Return Grille
RAOB = Return Register, with S-OBD damper
RAHD, RAHDOB Aluminum Louvered Face Grilles and Registers
RAHD Return Air Grille
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $27 $28 $30 $31 $31 $34 $38 $41 $41 $45 $48 $51 $58 $61 $65 $68 $86 $88 $93 $96 $99 $1036" $27 $28 $31 $32 $34 $38 $41 $45 $45 $51 $55 $58 $65 $68 $75 $79 $95 $99 $103 $106 $110 $1178" $31 $33 $34 $38 $41 $45 $48 $51 $55 $61 $65 $72 $79 $83 $88 $104 $110 $113 $117 $119 $124
10" $34 $38 $41 $45 $51 $55 $55 $61 $68 $75 $81 $86 $93 $99 $116 $119 $124 $126 $131 $13712" $41 $45 $51 $55 $58 $65 $68 $75 $81 $88 $95 $102 $109 $126 $131 $133 $137 $144 $15114" $51 $58 $65 $68 $75 $79 $86 $95 $102 $102 $116 $126 $143 $148 $154 $162 $167 $17516" $65 $72 $79 $86 $93 $99 $106 $110 $122 $133 $140 $161 $167 $175 $181 $189 $19418" $81 $88 $95 $102 $113 $119 $129 $136 $147 $156 $181 $187 $194 $202 $214 $22220" $99 $106 $113 $122 $133 $140 $154 $161 $170 $194 $205 $216 $227 $235 $24622" $116 $129 $140 $154 $163 $174 $184 $197 $219 $230 $240 $250 $260 $27324" $140 $154 $167 $181 $194 $208 $222 $246 $254 $263 $273 $284 $28626" $163 $181 $197 $215 $231 $249 $270 $277 $287 $298 $307 $31828" $194 $215 $231 $252 $272 $298 $305 $315 $321 $331 $34330" $231 $252 $276 $298 $329 $334 $343 $348 $356 $36632" $272 $298 $330 $356 $361 $369 $375 $383 $38934" $323 $358 $386 $389 $397 $404 $411 $41936" $387 $416 $421 $424 $432 $437 $446
RAHDOB Return Air Register (with Opposed Blade Damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $34 $35 $37 $40 $40 $44 $48 $51 $52 $58 $65 $68 $77 $81 $85 $88 $106 $108 $114 $119 $123 $1296" $34 $35 $38 $41 $44 $48 $52 $56 $58 $64 $74 $78 $85 $88 $98 $102 $118 $122 $127 $132 $136 $1438" $38 $42 $44 $48 $52 $56 $61 $64 $69 $81 $85 $93 $102 $107 $111 $128 $136 $139 $143 $146 $153
10" $43 $48 $52 $56 $64 $68 $69 $77 $89 $98 $104 $109 $119 $125 $142 $145 $151 $155 $161 $16812" $51 $56 $64 $69 $72 $81 $85 $96 $104 $112 $121 $131 $138 $155 $160 $163 $168 $177 $18514" $71 $79 $88 $92 $101 $106 $125 $135 $143 $145 $163 $172 $190 $197 $204 $213 $220 $22916" $88 $95 $105 $112 $122 $139 $146 $143 $168 $182 $185 $210 $218 $226 $232 $243 $25118" $105 $114 $122 $132 $154 $162 $173 $182 $197 $205 $231 $238 $247 $256 $271 $28220" $125 $135 $144 $165 $179 $186 $200 $212 $221 $245 $256 $270 $284 $295 $30922" $146 $162 $183 $200 $210 $223 $238 $251 $273 $284 $297 $310 $323 $33924" $174 $197 $213 $230 $245 $265 $279 $303 $311 $323 $336 $350 $35526" $223 $244 $263 $284 $307 $323 $346 $354 $367 $381 $393 $40728" $274 $298 $317 $346 $363 $392 $402 $415 $424 $437 $45230" $310 $332 $360 $387 $425 $425 $439 $448 $457 $46932" $363 $395 $421 $453 $464 $472 $478 $492 $50334" $410 $449 $485 $483 $496 $507 $515 $52536" $484 $516 $524 $530 $541 $551 $566
Notes:1. Finish is white unless otherwise specified.2. Oversized grilles not available on this model.3. Prices reflect blades running the long dimension. 25% List Add for blades running the short dimension.4. Height cannot be fractional.
HEI
GH
TH
EIG
HT
WIDTH
WIDTH
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 10/9/2008 AR-3
RAHD, RAHDOB Heavy Duty Aluminum Grilles & Registers
Model Number Width x Height (nominal) Paint Finish
20 x 20
White (Standard)
RAHD = Return Grille, heavy duty, no damper
RAHDOB = Return Register, heavy duty, with S-OBD damper
Example: RAHDOB 2020
RAC5, RAC5OB Cube Core Aluminum Grilles and Registers
RAC5 Cube Core
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" 7.30 7.30 8.11 8.92 10.55 11.36 11.36 12.17 12.98 13.79 14.60 16.22 17.04 19.47 20.28 22.71 24.34 25.15 25.96 26.77 28.396" 7.30 8.11 8.92 10.55 11.36 12.17 12.98 12.98 14.60 15.41 16.22 19.47 20.28 21.90 22.71 25.15 28.39 29.20 30.01 30.83 31.648" 8.11 8.92 10.55 11.36 12.17 12.98 13.79 14.60 15.41 17.04 19.47 21.09 22.71 24.34 25.15 25.96 30.83 31.64 32.45 32.45 34.0710" 10.55 11.36 12.17 12.98 14.60 15.41 16.22 17.04 20.28 21.09 23.52 25.15 26.77 29.20 32.45 34.88 35.69 37.31 38.13 39.7512" 12.17 12.98 14.60 15.41 16.22 17.85 20.28 21.90 23.52 25.15 26.77 30.01 31.64 34.88 38.94 40.56 41.37 42.18 42.9914" 14.60 16.22 17.85 20.28 21.90 23.52 25.15 26.77 30.01 31.64 34.07 35.69 40.56 44.62 47.05 47.86 49.48 51.1116" 19.47 21.09 22.71 24.34 25.96 28.39 29.20 32.45 34.88 37.31 39.75 44.62 50.29 51.92 53.54 56.78 58.4118" 23.52 25.15 26.77 30.01 31.64 34.07 37.31 39.75 42.18 43.80 49.48 55.16 57.59 60.03 62.46 65.7120" 28.39 30.83 32.45 35.69 38.13 40.56 42.99 46.24 48.67 55.16 60.03 64.08 66.52 69.76 73.0122" 34.07 37.31 40.56 42.99 46.24 49.48 52.73 55.97 61.65 67.33 70.57 74.63 77.87 81.9324" 39.75 44.62 47.86 51.11 55.16 60.03 62.46 68.95 74.63 77.87 81.93 85.18 88.4226" 48.67 51.11 55.97 60.03 65.71 69.76 76.25 81.93 85.99 89.23 93.29 96.5328" 55.16 60.03 65.71 71.38 77.05 85.18 88.42 93.29 97.34 102.21 105.4530" 65.71 71.38 77.87 84.36 90.85 96.53 101.40 105.45 110.32 113.5732" 77.06 82.74 92.48 98.15 104.64 109.51 113.57 118.43 121.6834" 92.48 101.40 107.08 113.57 118.43 122.49 127.36 130.6036" 109.51 115.19 121.68 126.55 130.60 135.47 139.5238" 123.30 137.09 141.15 146.83 151.69 156.5640" 142.77 148.45 154.13 158.99 163.8642" 155.75 160.62 167.11 173.6044" 167.92 176.03 183.3346" 184.95 189.8248" 196.31
RAC5OB Cube Core (with Opposed Blade Damper)
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $22 $22 $25 $25 $27 $30 $31 $32 $36 $42 $43 $49 $52 $54 $55 $64 $66 $69 $73 $75 $796" $22 $23 $25 $27 $30 $32 $34 $36 $39 $47 $50 $54 $55 $62 $64 $72 $74 $77 $81 $83 $868" $23 $26 $27 $30 $32 $34 $38 $39 $42 $52 $54 $58 $64 $67 $69 $78 $83 $84 $86 $89 $9310" $26 $30 $32 $34 $39 $41 $42 $48 $56 $62 $65 $67 $74 $77 $86 $88 $91 $94 $98 $10212" $31 $34 $39 $42 $44 $50 $52 $60 $65 $70 $75 $82 $85 $94 $97 $99 $102 $107 $11214" $46 $51 $57 $59 $65 $68 $83 $89 $94 $96 $107 $111 $121 $126 $129 $135 $139 $14416" $57 $60 $67 $70 $77 $91 $95 $105 $109 $118 $118 $132 $137 $141 $145 $152 $15718" $66 $72 $76 $83 $99 $105 $111 $116 $126 $130 $144 $148 $153 $159 $167 $17520" $77 $84 $89 $106 $115 $118 $125 $134 $139 $151 $157 $166 $174 $181 $19022" $90 $100 $115 $125 $131 $139 $149 $156 $167 $173 $181 $189 $197 $20724" $106 $122 $132 $143 $151 $164 $172 $184 $188 $196 $204 $213 $217
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples. Divide grille into equal sections that do not exceed the sizes in the grid above. Add $25 List per joint.3. Size limits: Minimum 4" x 4", Maximum 48" x 48".4. Fractional sizes available.5. T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.7. For Core only, multiply List Price by .75.
24 x 24" 20 x 20" $40
Panel Size Maximum Grille Size List Add24 x 12" 20 x 8" $40
HEI
GH
T
WIDTH
WIDTH
HEI
GH
T
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 8/25/2008 AR-4
RAC5, RAC5OB Cube Core Aluminum Grilles and Registers
Model Number Frame Type Width x Height (nominal) Paint Finish
12 x 12
Surface (Standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *
CO = Core only White (Standard)
RAC5 = Return Grille, 1/2" x 1/2" x 1/2", no damper
RAC5OB = Return Register, 1/2" x 1/2" x 1/2", with S-OBD damper Example: RAC5 1212 RAC5OB 1212
* For T-bar lay-in (panel), panel size = 24" x 24". Maximum grille size is 20" x 20".
RAC5F Alumimum Cube Core Filter Grille
RAC5F, 1/2" x 1/2" x 1/2" (No Damper)
4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"8" 12.22 13.03 13.85 14.6610" 13.03 13.85 14.66 15.48 16.2912" 14.66 14.66 15.48 17.11 17.92 20.3614" 15.48 16.29 17.11 17.92 20.36 21.99 25.2516" 16.29 17.92 17.92 20.36 21.99 24.44 26.88 30.9518" 17.92 19.55 20.36 21.18 24.44 26.07 30.14 33.40 38.2820" 19.55 20.36 21.18 21.99 25.25 28.51 32.58 35.84 41.54 44.8022" 20.36 21.18 21.99 24.44 26.07 30.14 35.02 39.91 43.98 49.69 55.3924" 21.99 23.62 24.44 26.07 29.32 31.77 37.47 42.36 48.06 52.94 59.46 61.0926" 24.44 25.25 26.88 30.14 33.40 35.84 42.36 46.43 51.32 57.02 67.61 70.86 76.5728" 25.25 26.07 28.51 30.95 35.02 38.28 43.98 49.69 56.20 61.09 70.05 77.38 83.90 89.6030" 26.88 29.32 30.95 34.21 38.28 41.54 48.06 52.94 59.46 65.98 70.86 82.27 92.04 98.56 105.8932" 29.32 30.95 32.58 35.84 40.73 44.80 51.32 57.83 64.35 70.05 79.82 89.60 98.56 107.52 116.48 127.0734" 30.95 32.58 35.02 39.10 43.17 48.06 52.94 61.09 68.42 74.94 85.53 96.11 106.70 116.48 127.88 138.47 149.0636" 32.58 35.02 37.47 41.54 47.24 51.32 57.83 65.16 71.68 79.01 91.23 103.45 114.03 125.44 138.47 151.50 164.54 178.3838" 38.28 39.91 42.36 46.43 52.94 57.83 67.61 74.94 82.27 88.78 101.00 112.41 123.81 134.40 147.43 160.46 174.31 188.16 194.6740" 39.91 40.73 43.17 48.06 53.76 60.28 70.05 77.38 85.53 93.67 105.89 116.48 140.91 146.62 155.58 166.98 180.83 193.86 202.82 212.5942" 40.73 42.36 44.80 49.69 56.20 61.90 71.68 80.64 89.60 97.74 111.59 122.18 134.40 150.69 158.83 172.68 185.71 200.37 210.96 220.74 230.5144" 41.54 43.17 46.43 51.32 57.02 65.16 74.94 84.71 93.67 103.45 116.48 127.88 140.10 155.58 165.35 178.38 192.23 206.08 217.48 228.88 240.29 250.8846" 43.17 46.43 48.06 52.94 59.46 66.79 77.38 87.15 96.93 107.52 122.18 132.77 146.62 159.65 170.24 184.90 198.75 212.59 225.63 237.03 249.25 262.28 273.6848" 44.80 48.06 50.50 56.20 61.09 68.42 79.01 89.60 101.82 112.41 127.88 137.66 151.50 165.35 177.57 191.41 204.45 218.29 232.96 244.36 258.21 273.68 284.27 291.60
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples. Divide grille into equal sections that do not exceed sizes in grid above. Add $25 List per joint.3. Size limits: Minimum 4" x 4", Maximum 48" x 48".4. Fractional sizes available.5.T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.7. These grilles are designed to accept 1" filters (1" hog hair filter included from factory).
WIDTH
HEI
GH
T
Panel Size Maximum Grille Size List Add24 x 12" 20 x 8" $4024 x 24" 20 x 20" $40
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 10/9/2008 AR-5
RAC5F Aluminum Cube Core Filter Grille
Model Number Frame Type Width x Height (nominal) Panel Size* Paint Finish
10 x 10
Surface (Standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *6A frame type only
GS = Grille size
FS = Filter size White (Standard)
Example: RAC5F GS 1010
RAC5F = 1/2" x 1/2" x 1/2"
2424 = 24 x 24 panel (20 x 20 maximum grille
size)
RAF 45° Deflection Louvered Face Return Air Filter Grille
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"8" 12.98 13.79 15.41 16.22 17.85 18.66 19.47 21.90 23.52 26.77 27.58 30.83 32.45 34.88 37.31 41.37 42.99 44.62 46.24 47.86 50.2910" 14.60 16.22 17.85 19.47 21.90 22.71 23.52 25.96 30.01 31.64 34.07 36.50 38.94 42.18 47.86 48.67 50.29 51.11 53.54 55.1612" 17.85 19.47 21.90 23.52 25.15 26.77 28.39 32.45 34.07 37.31 40.56 42.99 46.24 51.92 54.35 55.97 58.41 60.03 61.6514" 22.71 24.34 26.77 29.20 31.64 33.26 38.13 39.75 42.99 46.24 47.86 51.92 60.84 63.27 64.90 67.33 69.76 71.3816" 27.58 30.01 32.45 35.69 38.13 41.37 44.62 47.86 51.92 55.16 58.41 67.33 69.76 73.01 76.25 78.69 81.1218" 34.07 37.31 39.75 42.99 46.24 50.29 53.54 57.59 61.65 64.90 73.82 77.06 81.12 84.36 84.61 87.6120" 40.56 44.62 47.86 51.11 55.16 59.22 63.27 67.33 71.38 80.31 84.36 88.42 93.29 97.34 101.4022" 49.48 53.54 60.84 63.27 64.08 72.20 77.06 81.93 90.85 95.72 100.59 105.45 110.32 115.1924" 55.16 64.08 69.76 73.82 81.12 86.80 93.29 101.40 105.45 110.32 115.19 120.06 124.1126" 68.95 75.44 82.74 89.23 96.53 103.02 111.94 127.36 121.68 126.55 132.22 137.0928" 81.12 89.23 97.34 105.45 113.57 121.68 132.22 136.28 140.34 144.39 149.2630" 95.72 105.45 115.19 124.92 133.04 140.34 143.58 149.26 154.13 160.6232" 114.38 124.92 137.09 145.20 150.88 155.75 161.43 167.11 172.7834" 134.66 148.45 157.37 163.05 167.92 173.60 179.27 184.9536" 161.43 170.35 175.22 180.90 186.57 192.25 197.1238" 176.03 183.33 190.63 196.31 203.61 210.9140" 192.25 199.55 206.85 214.15 220.6442" 208.48 217.40 225.51 233.6244" 227.13 236.87 247.4146" 247.41 257.1548" 263.64
Filter Notes:1. These grilles are designed to accept 1" filters (1" hog hair filter included from factory).2. Fractional sizes available.3. Oversized Grilles (larger than on price sheet above) are priced as follows:
a. Divide the grille into equal sections not exceeding the sizes on the price sheet above.b. Add $25 List per joint.
4. Reverse Sizes: prices above are for blades running parallel to grille's longer dimension. Add 25% List for blades parallel to shorter dimension.5. T-Bar Lay-in Models may be applied to lay-in ceilings (1" inverted T-bar) as follows:
a. May be used only when nominal neck size (in either direction) is 2" LESS than the T-Bar ceiling module. b. Grilles with TB borders are ordered according to their nominal face size (see ordering procedures).c. Screw holes are omitted on TB models.d. TBP (T-bar Panel) border is used when a lay-in application is required of a grille whose neck is not 2" less (in one direction) than the ceiling module size. An extended panel (steel is standard) must be added to the grille. Add the List Price for basic grille to List Price of appropriate panel size as follows.
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Reverse sizes, 25% List Add.3. Fractional sizes available.4. T-Bar ceilings, add optional panel price to grille price.
HEI
GH
T
24 x 24" 20 x 20" $4024 x 12" 20 x 8" $40
WIDTH
Panel Size Maximum Grille Size List Add
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 10/9/2008 AR-6
RAF 45° Deflection Louvered Face Return Air Filter Grille
Model Number Frame Type Width x Height (nominal) Panel Size* Paint Finish
20 x 20
Surface (Standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *6A frame type only
GS = Grille size
FS = Filter size White (Standard)
Example: RAF GS 2020
RAF = Filter Grille, 45° deflection louver
2424 = 24 x 24 panel (20 x 20 maximum grille
size)
RAP, RAPOB Aluminum Perforated Return Air Grille & Register
RAP
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $14 $15 $15 $16 $16 $17 $20 $21 $21 $236" $14 $15 $16 $16 $17 $20 $21 $23 $23 $268" $16 $17 $17 $20 $21 $23 $25 $26 $2810" $17 $20 $21 $23 $26 $28 $28 $3212" $21 $23 $26 $28 $30 $34 $3514" $26 $30 $34 $35 $39 $4116" $34 $37 $41 $44 $4818" $42 $46 $49 $5320" $51 $55 $5822" $60 $6724" $72
RAPOB (with Opposed Blade Damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $21 $22 $22 $25 $25 $27 $30 $31 $32 $366" $21 $22 $23 $25 $27 $30 $32 $34 $36 $398" $23 $26 $27 $30 $32 $34 $38 $39 $4210" $26 $30 $32 $34 $39 $41 $42 $4812" $31 $34 $39 $42 $44 $50 $5214" $46 $51 $57 $59 $65 $6816" $57 $60 $67 $70 $7718" $66 $72 $76 $8320" $77 $84 $8922" $90 $10024" $106
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples. Divide grille into equal sections that do not exceed the sizes in the grid above. Add $25 List per joint.3. Size limits: Minimum 4" x 4", Maximum 24" x 24".4. Fractional sizes not available.5. T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.
24 x 24" 20 x 20" $40
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
List Add24 x 12" 20 x 8" $40
Panel Size Maximum Grille Size
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 8/25/2008 AR-7
RAP, RAPOB Aluminum Perforated Return Air Grille & Register
Model Number Frame Type Width x Height (nominal) Panel Size* Paint Finish
Surface (Standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *6A frame type only
12 x 12
White (Standard)
Example: RAPOB 6A 1212
RAP = Grille, no damper
RAPOB = Register, with S-OBD damper
2424 = 24 x 24 panel (20 x 20 maximum grille
size)
RAPF, RAPFOB Aluminum Perforated Return Air Filter
RAPF Filter Grille
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $16 $17 $17 $18 $18 $20 $23 $24 $24 $266" $16 $17 $18 $18 $20 $23 $24 $26 $26 $308" $18 $20 $20 $23 $24 $26 $29 $30 $3210" $20 $23 $24 $26 $30 $32 $32 $3712" $24 $26 $30 $32 $34 $39 $4014" $29 $34 $39 $40 $45 $4716" $39 $42 $47 $51 $5518" $48 $53 $56 $6120" $59 $63 $6722" $69 $7724" $83
RAPFOB Filter Register (with Opposed Blade Damper)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $24 $25 $25 $29 $29 $31 $35 $36 $37 $416" $24 $25 $26 $29 $31 $34 $37 $39 $41 $458" $26 $30 $31 $35 $37 $39 $43 $45 $4810" $30 $35 $37 $39 $45 $47 $49 $5512" $36 $39 $39 $48 $51 $58 $6014" $53 $51 $66 $68 $75 $7816" $57 $69 $77 $81 $8918" $76 $83 $87 $9520" $86 $97 $10222" $104 $11524" $123
Optional Aluminum Panel
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are priced as multiples. Divide grille into equal sections that do not exceed the sizes in the grid above. Add $25 List per joint.3. Size limits: Minimum 4" x 4", Maximum 24" x 24".4. Fractional sizes not available.5. T-Bar ceilings, add optional panel price to grille price.6. Lay-in grilles are always specified by grid size required.
24 x 24" 20 x 20" $40
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
List Add24 x 12" 20 x 8" $40
Panel Size Maximum Grille Size
Aluminum Return Grille and Register List Prices • Grille Tech Inc. • 8/25/2008 AR-8
RAPF, RAPFOB Aluminum Perforated Return Air Filter
Model Number Frame Type Neck Size Panel Size* Paint Finish
6 x 6
Surface (Standard)
T = T-bar lay-in (full face)
6A = T-bar lay-in (panel) *6A frame type only
GS = Grille size
FS = Filter size White (Standard)
Example: RAPF GS 0606
RAPF = Grille, no damper
RAPFOB = Register, with S-OBD damper
2424 = 24 x 24 panel (20 x 20 maximum
grille size)
DGS, DGF Aluminum Door Grilles
Model DGS, Single Flange
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $17 $18 $17 $20 $20 $21 $24 $26 $26 $286" $17 $18 $20 $20 $21 $24 $26 $28 $28 $328" $20 $21 $21 $24 $26 $28 $30 $32 $3510" $21 $24 $26 $28 $32 $35 $35 $3912" $26 $28 $32 $35 $37 $41 $4314" $32 $37 $41 $43 $47 $5016" $41 $46 $50 $54 $5918" $51 $56 $60 $6420" $63 $67 $7122" $73 $8224" $88
Model DGF, Double Flange
6" 8" 10" 12" 14" 16" 18" 20" 22" 24"4" $20 $21 $21 $22 $22 $24 $28 $30 $30 $336" $20 $21 $22 $23 $24 $28 $30 $33 $33 $378" $22 $24 $24 $28 $30 $33 $35 $37 $4010" $24 $28 $30 $33 $37 $40 $40 $4412" $30 $33 $37 $40 $42 $48 $4914" $37 $42 $48 $49 $55 $5716" $48 $53 $57 $62 $6718" $59 $64 $69 $7420" $72 $77 $8222" $84 $9424" $101
Notes:1. Finish is white unless otherwise specified.2. Sizes larger than shown are not available.3. Fractional sizes not available.4. Prices above reflect blades running the long dimension. For blades running the short dimension, 25% List Add.5. 15% List Add for insect screen.
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
Door Grille List Prices • Grille Tech Inc. • 8/25/2008 DG-1
DGS, DGF Aluminum Door Grilles
Model Number Width x Height (nominal) Paint Finish
12 x 6
W = White
S = Satin Aluminum
DGS = Single Flange
DGF = Double Flange
DGSI = Single Flange w/ Insect Screen
DGFI = Double Flange w/ Insect Screen
Example: DGS 1206 S
OBD, PBD, and SBD Air Control Dampers
Models OBDand PBD Dampers (Opposed and Parallel Blade Dampers)All Heavy Aluminum Extrusion Construction
6" 8" 12" 16" 20" 24" 28" 32" 36" 40" 44" 48"6" $77 $77 $77 $77 $82 $88 $93 $98 $103 $107 $109 $1108" $77 $77 $77 $81 $86 $89 $95 $102 $105 $109 $110 $114
12" $77 $81 $81 $82 $88 $89 $98 $107 $107 $110 $114 $11916" $103 $105 $107 $110 $123 $124 $147 $149 $161 $166 $173 $19320" $130 $135 $137 $140 $142 $144 $175 $179 $180 $201 $208 $21024" $147 $149 $154 $156 $159 $161 $193 $196 $198 $235 $240 $24728" $179 $180 $184 $198 $212 $222 $229 $240 $252 $261 $266 $27832" $210 $212 $215 $222 $229 $240 $252 $254 $261 $280 $289 $29836" $212 $215 $217 $224 $233 $245 $254 $261 $292 $306 $317 $32940" $259 $261 $264 $271 $285 $301 $315 $329 $340 $350 $366 $37644" $284 $285 $289 $301 $308 $313 $329 $334 $343 $375 $383 $39048" $296 $298 $301 $308 $313 $317 $334 $340 $371 $382 $389 $43852" $338 $340 $343 $350 $366 $382 $396 $411 $427 $445 $459 $47656" $343 $347 $350 $375 $385 $390 $420 $434 $439 $474 $487 $49060" $350 $352 $359 $382 $389 $403 $427 $443 $462 $480 $488 $543
Notes:1. Maximum sizes: A. Single section 48"w x 60"h. B. Multiple section 96"w x 60"h or 48"w x 120"h.2. For larger than 48 x 60", price as equal section dampers (I.e. 32 x 64" = 2, 32 x 32").3. Sizes not listed, call office for quote.4. Consult factory for assemblies requiring more than two sections.5. Type C Casing (Round/Oval), 50% List Add.6. Manual Quadrant, $15 List Add.7. Extended Operator Shaft, $8 List.
SBD (Single Blade Damper with Manual Quadrant)All Galvanized Steel Construction
4" 8" 12" 16" 20" 24" 28" 32" 36"4" $32 $32 $32 $33 $36 $41 $44 $48 $546" $32 $32 $33 $33 $36 $42 $45 $50 $548" $32 $32 $33 $36 $41 $44 $45 $50 $54
10" $32 $33 $35 $39 $42 $45 $48 $54 $5612" $32 $33 $35 $39 $44 $45 $48 $54 $56
Note: If size is not shown, use next size larger pricing.
WIDTH
HEI
GH
T
WIDTH
HEI
GH
T
Control Damper List Prices • Grille Tech Inc. • 8/25/2008 CD-1
OBD, PBD, HSBD and SBD Air Control Dampers
Model Number Damper Width x Height Damper Options* Control Accessories*
24 x 24
Blade seals
Frame seals
*Excluding SBD
Manual Quadrant
*Excluding SBD
PBD = Parallel blade damper
HSBD = Heavy single blade
OBD = Opposed blade damper
Example: OBD 2424 Blade Seals Manual Quadrant
SBD = Single blade damper
S-OBD and S-OBDH Air Control DampersFor Use on Back of Grilles
Models S-OBD & S-OBDH (Opposed Blade Dampers, Screwdriver or Handle Operated)
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"4" $9 $9 $9 $12 $12 $13 $13 $13 $14 $17 $22 $22 $25 $26 $26 $26 $26 $26 $27 $30 $31 $346" $9 $9 $9 $12 $13 $13 $14 $14 $17 $17 $25 $26 $26 $26 $30 $30 $30 $30 $31 $34 $34 $348" $9 $12 $13 $13 $14 $14 $17 $17 $18 $26 $26 $27 $30 $31 $30 $31 $34 $34 $34 $35 $38
10" $12 $13 $14 $14 $17 $17 $18 $21 $27 $30 $30 $30 $34 $34 $34 $34 $35 $38 $39 $4012" $13 $14 $17 $18 $18 $21 $22 $27 $30 $31 $34 $38 $38 $38 $38 $39 $40 $43 $4414" $26 $27 $30 $31 $34 $35 $51 $52 $53 $56 $61 $60 $61 $64 $65 $66 $69 $7016" $30 $30 $34 $34 $38 $52 $52 $56 $60 $64 $60 $64 $66 $66 $66 $70 $7418" $31 $34 $35 $39 $53 $56 $57 $60 $65 $64 $65 $66 $69 $70 $74 $7820" $34 $38 $40 $56 $60 $60 $60 $66 $66 $66 $66 $70 $74 $78 $8222" $39 $43 $56 $60 $61 $64 $70 $70 $70 $73 $74 $78 $82 $8624" $44 $56 $60 $64 $66 $74 $74 $74 $78 $81 $82 $86 $9026" $78 $82 $86 $90 $99 $100 $101 $103 $104 $108 $112 $11628" $104 $108 $112 $113 $116 $118 $120 $125 $127 $131 $13430" $116 $118 $118 $118 $122 $126 $129 $130 $135 $13832" $122 $122 $125 $126 $127 $130 $134 $138 $14234" $126 $126 $129 $130 $134 $138 $142 $14836" $129 $130 $134 $138 $142 $148 $156
HEI
GH
T
WIDTH
Control Damper List Prices • Grille Tech Inc. • 8/25/2008 CD-2
S-OBD and S-OBDH Air Control Dampers
Model Number Damper Width x Height
24 x 24
S-OBD = Opposed blade damper, screwdriver operated
S-OBDH = Opposed blade damper, handle operated
Example: S-OBD 2424
WLC Extruded Outside Louvers
Model WLC
12" 16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60" 64" 68" 72" 76" 80" 84"
12" $76 $80 $83 $90 $101 $105 $109 $112 $115 $119 $127 $145 $155 $163 $169 $180 $195 $209 $224
16" $83 $90 $94 $101 $105 $112 $115 $119 $127 $137 $151 $159 $173 $184 $191 $216 $238 $252 $289
20" $94 $101 $105 $112 $115 $119 $127 $141 $151 $166 $180 $191 $198 $224 $246 $267 $295 $310 $325
24" $109 $119 $123 $130 $137 $145 $151 $169 $180 $195 $209 $230 $242 $267 $289 $317 $331 $353 $378
28" $119 $127 $130 $137 $145 $159 $173 $195 $209 $224 $238 $260 $270 $295 $317 $353 $375 $382 $396
32" $127 $133 $137 $148 $155 $173 $188 $209 $230 $246 $260 $274 $289 $313 $343 $396 $426 $432 $447
36" $133 $141 $148 $155 $173 $195 $213 $230 $249 $260 $289 $303 $325 $353 $396 $432 $454 $468 $483
40" $141 $148 $159 $169 $191 $213 $238 $260 $281 $295 $313 $328 $353 $382 $428 $468 $497 $505 $541
44" $159 $169 $177 $195 $216 $238 $263 $289 $310 $321 $353 $364 $389 $432 $468 $505 $540 $562 $576
48" $173 $188 $198 $216 $238 $263 $289 $317 $339 $353 $375 $389 $426 $463 $505 $548 $569 $598 $630
52" $188 $198 $216 $238 $263 $281 $310 $339 $357 $382 $404 $426 $454 $490 $533 $576 $598 $627 $667
56" $198 $216 $238 $263 $281 $295 $325 $360 $382 $404 $432 $454 $490 $519 $555 $606 $627 $663 $699
60" $216 $238 $249 $274 $303 $310 $346 $382 $404 $426 $468 $490 $519 $548 $584 $634 $663 $699 $727
64" $238 $249 $263 $289 $317 $331 $368 $404 $432 $454 $490 $519 $540 $576 $620 $663 $691 $735 $770
68" $249 $263 $274 $310 $331 $353 $382 $426 $454 $475 $519 $548 $569 $612 $655 $699 $735 $786 $810
72" $263 $274 $285 $325 $346 $368 $404 $447 $475 $505 $540 $569 $590 $641 $713 $735 $778 $828 $850
76" $274 $285 $295 $343 $360 $389 $426 $468 $497 $526 $562 $584 $620 $663 $756 $778 $821 $865 $893
80" $285 $295 $310 $353 $382 $410 $447 $490 $519 $540 $584 $606 $648 $706 $792 $821 $857 $900 $929
84" $295 $307 $325 $368 $396 $432 $468 $511 $548 $562 $606 $634 $691 $749 $828 $850 $900 $944 $972
Notes:1. Insect Screen, 15% List Add.2. Bird Screen, standard.3. Joint Charge, $50 list.4. For Sizes Not Listed:
A. Even sizes, use List Price of next size larger.B. For odd sizes, call office for quote.C. Larger than published, only one dimension can exceed 72" to maximum 72 x 120" or 120 x 72". Divide into equal sections, add the List Price of those sections, and add $50 list per joint for Total L Example: 1, 48 x 160" WL4 = 2, 48 x 80" sections. 2 x $540 + $50 list (one joint) = $1130 List.
5. Finish - Mill finish is standard. For white paint, 25% List Add.6. Minimum size 8" x 8".
WIDTH
HEI
GH
T
Wall Louver List Prices • Grille Tech Inc. • 8/25/2008 WL-1
WLF Extruded Outside Louvers
Model WLF
12" 16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60" 64" 68" 72" 76" 80" 84"
12" $84 $88 $91 $100 $111 $115 $119 $124 $127 $131 $139 $159 $171 $179 $186 $198 $215 $230 $246
16" $91 $100 $104 $111 $115 $124 $127 $131 $139 $151 $167 $175 $191 $202 $211 $238 $262 $278 $317
20" $104 $111 $115 $124 $127 $131 $139 $155 $167 $182 $198 $211 $218 $246 $270 $293 $325 $341 $357
24" $119 $131 $135 $143 $151 $159 $167 $186 $198 $215 $230 $253 $266 $293 $317 $349 $365 $389 $416
28" $131 $139 $143 $151 $159 $175 $191 $215 $230 $246 $262 $286 $297 $325 $349 $389 $413 $420 $436
32" $139 $147 $151 $162 $171 $191 $206 $230 $253 $270 $286 $302 $317 $345 $377 $436 $468 $476 $491
36" $147 $155 $162 $171 $191 $215 $235 $253 $273 $286 $317 $333 $357 $389 $436 $476 $500 $515 $531
40" $155 $162 $175 $186 $211 $235 $262 $286 $309 $325 $345 $360 $389 $420 $471 $515 $547 $555 $595
44" $175 $186 $195 $215 $238 $262 $289 $317 $341 $353 $389 $400 $428 $476 $515 $555 $594 $618 $634
48" $191 $206 $218 $238 $262 $289 $317 $349 $373 $389 $413 $428 $468 $509 $555 $602 $626 $658 $693
52" $206 $218 $238 $262 $289 $309 $341 $373 $393 $420 $444 $468 $500 $539 $587 $634 $658 $689 $733
56" $218 $238 $262 $289 $309 $325 $357 $396 $420 $444 $476 $500 $539 $571 $611 $666 $689 $729 $769
60" $238 $262 $273 $302 $333 $341 $380 $420 $444 $468 $515 $539 $571 $602 $642 $698 $729 $769 $800
64" $262 $273 $289 $317 $349 $365 $404 $444 $476 $500 $539 $571 $594 $634 $682 $729 $760 $809 $847
68" $273 $289 $302 $341 $365 $389 $420 $468 $500 $523 $571 $602 $626 $673 $721 $769 $809 $864 $891
72" $289 $302 $313 $357 $380 $404 $444 $491 $523 $555 $594 $626 $649 $705 $785 $809 $856 $911 $935
76" $302 $313 $325 $377 $396 $428 $468 $515 $547 $578 $618 $642 $682 $729 $832 $856 $903 $951 $982
80" $313 $325 $341 $389 $420 $451 $491 $539 $571 $594 $642 $666 $713 $776 $871 $903 $943 $990 $1,022
84" $325 $337 $357 $404 $436 $476 $515 $562 $602 $618 $666 $698 $760 $824 $911 $935 $990 $1,038 $1,069
Notes:1. Insect Screen, 15% List Add.2. Bird Screen, standard.3. Joint Charge, $50 list.4. For Sizes Not Listed:
A. Even sizes, use List Price of next size larger.B. For odd sizes, call office for quote.C. Larger than published, only one dimension can exceed 72" to maximum 72 x 120" or 120 x 72". Divide into equal sections, add the List Price of those sections, and add $50 list per joint for Total List. Example: 1, 48 x 160" WL4 = 2, 48 x 80" sections. 2 x $594 + $50 list (one joint) = $1238 List.
5. Finish - Mill finish is standard. For white paint, 25% List Add.6. Minimum size 8" x 8".
WIDTH
HEI
GH
T
Wall Louver List Prices • Grille Tech Inc. • 8/25/2008 WL-2
WLF-DA Extruded Outside Louvers Dade County Approved
Model WLF-DA
12" 16" 20" 24" 28" 30 36" 40" 44" 48" 52" 56" 60"
12" $122 $128 $133 $145 $161 $168 $174 $180 $184 $190 $203 $232 $248
16" $133 $145 $151 $161 $168 $180 $184 $190 $203 $219 $242 $254 $277
20" $151 $161 $168 $180 $184 $190 $203 $225 $242 $265 $288 $306 $317
24" $174 $190 $197 $209 $219 $232 $242 $271 $288 $312 $335 $369 $387
28" $190 $203 $209 $219 $232 $254 $277 $312 $335 $358 $381 $416 $433
32" $203 $213 $219 $236 $248 $277 $300 $335 $369 $393 $416 $439 $462
36" $213 $225 $236 $248 $277 $312 $341 $369 $398 $416 $462 $484 $520
40" $225 $236 $254 $271 $306 $341 $381 $416 $449 $472 $501 $524 $565
44" $254 $271 $283 $312 $346 $381 $420 $462 $497 $513 $565 $582 $623
48" $277 $300 $317 $346 $381 $420 $462 $507 $542 $565 $600 $623 $681
52" $300 $317 $346 $381 $420 $449 $497 $542 $571 $611 $646 $681 $727
56" $317 $346 $381 $420 $449 $472 $520 $576 $611 $646 $692 $727 $785
60" $346 $381 $398 $439 $484 $497 $553 $611 $646 $681 $750 $785 $830
64" $381 $398 $420 $462 $507 $530 $588 $646 $692 $727 $785 $830 $864
68" $398 $420 $439 $497 $530 $565 $611 $681 $727 $760 $830 $876 $911
72" $420 $439 $456 $520 $553 $588 $646 $715 $760 $807 $864 $911 $945
76" $439 $456 $472 $548 $576 $623 $681 $750 $795 $841 $899 $934 $992
80" $456 $472 $497 $565 $611 $660 $715 $785 $830 $864 $934 $969 $1,038
Notes:1. Flange frame only2. Maximum size 60" Wide x 80" High (one piece).3. Bird Screen, standard.4. Joint Mullion, add $132 list per mullion (for multiple unit installation).5. For Sizes Not Listed:
A. Even sizes, use List Price of next size larger.B. For odd sizes, call office for quote.C. Multiple Units Application: Units over 60" wide can be joined together by structural mullions to achieve greater width. Divide into equal sections, add the List Price of those sections, and add $132 list per mullion. Example: 1, 120" x 80" WLF-DA = 2, 60 x 80" sections. (2 x $1038) + $132 list (one joint) = $2208 List.
6. Finish - Mill finish is standard. For powder coat paint, Add 25% to list price.7. Minimum size 12" x 12".8. Miami Dade County Approved NOA #04-1222.01/ Approved since 08/11/05.
WIDTH
HEI
GH
T
Wall Louver List Prices • Grille Tech Inc. • 8/25/2008 WL-3
WLC and WLF Extruded Outside Louvers
Model Number Options Width x Height Finish
Bird screen (Standard)
I = Insect screen
M = Mill Finish (Standard)
W = White Paint
12 x 12
WLC = Channel frame
WLF = Flange frame
WLF-DA = Dade County Approved
Examples WLC 1212 - W WLF I 1212 - M
WLF I 1212 - M - DA
BVF2I, BVF4I and BVC4I Brick Vent Louvers
BVF2I
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"
4" $32 $34 $36 $37 $37 $41 $46 $49 $49 $54 $58 $61 $70 $73 $78 $82 $103 $106 $112 $115 $119 $124
6" $32 $34 $37 $38 $41 $46 $49 $54 $54 $61 $66 $70 $78 $82 $90 $95 $114 $119 $124 $127 $132 $140
8" $37 $40 $41 $46 $49 $54 $58 $61 $66 $73 $78 $86 $95 $100 $106 $125 $132 $136 $140 $143 $149
10" $41 $46 $49 $54 $61 $66 $66 $73 $82 $90 $97 $103 $112 $119 $139 $143 $149 $151 $157 $164
12" $49 $54 $61 $66 $70 $78 $82 $90 $97 $106 $114 $122 $131 $151 $157 $160 $164 $173 $181
14" $61 $70 $78 $82 $90 $95 $103 $114 $122 $122 $139 $151 $172 $178 $185 $194 $200 $210
16" $78 $86 $95 $103 $112 $119 $127 $132 $146 $160 $168 $193 $200 $210 $217 $227 $233
BVF4I and BVC4I
6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"
4" $44 $46 $48 $52 $52 $57 $62 $66 $68 $75 $85 $88 $100 $105 $111 $114 $138 $140 $148 $155 $160 $168
6" $44 $46 $49 $53 $57 $62 $68 $73 $75 $83 $96 $101 $111 $114 $127 $133 $153 $159 $165 $172 $177 $186
8" $49 $55 $57 $62 $68 $73 $79 $83 $90 $105 $111 $121 $133 $139 $144 $166 $177 $181 $186 $190 $199
10" $56 $62 $68 $73 $83 $88 $90 $100 $116 $127 $135 $142 $155 $163 $185 $189 $196 $202 $209 $218
12" $66 $73 $83 $90 $94 $105 $111 $125 $135 $146 $157 $170 $179 $202 $208 $212 $218 $230 $241
14" $92 $103 $114 $120 $131 $138 $163 $176 $186 $189 $212 $224 $247 $256 $265 $277 $286 $298
16" $114 $124 $137 $146 $159 $181 $190 $186 $218 $237 $241 $273 $283 $294 $302 $316 $326
Notes:1. Finish is white unless otherwise specified.2. Prices reflect blades running the long dimension. 25% List Add for blades running the short dimension.3. For bird screen, replace "I" in part number for "B" (i.e. BVF4B)
WIDTH
WIDTH
HEI
GH
TH
EIG
HT
Wall Louver List Prices • Grille Tech Inc. • 9/5/2008 WL-4
PBZZU, SCFBZZU FIRE RATED DIFFUSERST-Bar Lay-in Diffusers with Ceiling Radiation Damper & Fire Blanket
LIST PRICE$76.48$76.48$83.52$86.04$89.06$85.95$96.62$99.64$99.64$99.64$99.64$112.20
Notes:
1. All BZZU Models come standard for Lay-In with a Ceiling Radiation Damper and Fire Blanket. 2. PBZZUs have a perforated face. SCFBZZUs have a square-cone face. 3. PRBZZUs are returns with a perforated face. 4. All BZZU Models are UL-Listed.
MODEL NUMBER NECK SIZE
10"8"
PBZZU / PRBZZU
22 x 22"20 x 20"
12"14"
6"
SCFBZZU
6"8"10"12"14"
Fire Rated Products List Prices • Grille Tech Inc. • 8/25/2008 FP-1
PBZZU, SCFBZZU FIRE RATED DIFFUSERS
Model Number Frame Type Neck Size
Number of Cones
3 (standard)
4 (optional)*for SCFBZZU only
06
Lay in (1") T-Bar
Note: Diffuser comes standard for lay-in application.
Paint Finish, Face
White (Standard)
Example: PBZZU 06
PBZZU = Perforated Face Diffuser with Ceiling Radiation Damper & Fire Blanket
PRBZZU = Perforated Face Return with Ceiling Radiation Damper & Fire Blanket
SCFBZZU = Square Cone Face Diffuser with Ceiling Radiation Damper & Fire Blanket
SQUARE TO ROUND ADAPTER
Model STR
LIST
6x6x6" 15.52
8"x8"x8" 16.71
10"x10"x10" 18.99
12"x12"x12" 20.68
14"x14"x14" 24.58
16"x16"x16" 28.43
18"x18"x18" 28.43
22"x22"x22" 41.63
Notes:Other sizes available. Contact our office for quote.
LEN
GTH
x W
IDTH
x D
IAM
ETER
Special Products List Prices • Grille Tech Inc. • 8/25/2008 SP-1
UNIVERSAL BACK COLLAR
Model UBC
4" 6" 8" 10" 12" 14"
LIST $2.15 $2.64 $3.14 $3.80 $4.46 $5.29
Notes:Other sizes available. Contact our office for quote.
DIAMETER
Special Products List Prices • Grille Tech Inc. • 8/25/2008 SP-2
WALL ACCESS PANEL WITH INSULATION
Model WAPI
SIZE LIST
8X8 $23.62
10X10 $28.12
12X12 $32.59
14X14 $37.09
16X16 $41.59
18X18 $46.09
20X20 $50.59
24X24 $55.07
Notes:Other sizes available. Contact our office for quote.
Special Products List Prices • Grille Tech Inc. • 8/25/2008 SP-3