+ All Categories
Home > Documents >  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active...

 · 2010-03-30 · rod to control the radial forces between the core and the corresponding active...

Date post: 10-Apr-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
10
Transcript
Page 1:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 2:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 3:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 4:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 5:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 6:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 7:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 8:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 9:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer
Page 10:  · 2010-03-30 · rod to control the radial forces between the core and the corresponding active rod. Nuts were welded to the external surface of the cylinder 50-mm from the outer

Recommended