2010-2011

Hello fellow Shelby enthusiasts,

Here at Shelby American my team is constantly experimenting with new technologies, techniques, and tools to keep our cars running in superior condition. Vehicle performance has been our primary focus since 1962 and the success of our vehicles has been highly beneficial. My team has won races, built great cars, and had a lot of fun pushing the envelope along the path to achieving our goals.

Now we have created the new Shelby Performance Parts division to give Shelby and Mustang enthusiasts the opportunity to access the same products that we use on the cars built by Shelby American. This Catalog is packed with performance parts formulated by the Shelby American design center, while other parts were created with key business partners such as: Ford Racing, Borla, Baer, and Kenne Bell. We also offer professional installation of Shelby parts at our Shelby American Motorsports Speed Shop, located in Las Vegas.

I like to make cars drive faster, look better, and work the way I think they should, therefore, all of our performance parts meet my highest standards. Do you have an idea for a new part? Feel free to contact us at Shelby Performance Parts and tell us what you think. Our friendly staff is more than willing to help fulfill the requests of our customers. Our telephone number is 702-405-3500. Enjoy!

My name is Carroll Shelby and performance is my business.

Carroll Shelby Founder, Shelby American Inc.

ShelbyPerformanceParts.com

Friends &Family

Your SourceFrom the Source

Shelby Performance Parts Staff:(From Left to Right)John Luft - CEO Keith Belair - CFO Rich Sparkman - IT Director Kameron Hymer- SPP Customer Service Tim Hill - SPP Customer Service/Team Shelby ClubJustin Adler - SPP Customer Service Carroll Shelby - Chairman of the BoardJonathan Eck - SPP Customer Service April Pulley- SPP Office Manager Spencer Krick - SPP Shipping Department Wendy Calito - SPP Warranty Juan Rodriguez - Wholesale Account Manager Gary Davis - VP of Production Sharon Elliott - SPP Director Joe Waldeck - SPP Purchasing Agent Robert Lane - SPP Director

Catalog Team:Jonathan MarshRich SparkmanTracey Smith

(702) 405-3500

Table of Contents

2 ShelbyPerformanceParts.com

Shelby Braking Systems 6Shelby Extreme Brakes 7Shelby Plus Pro Brake System Rear 8Shelby Extreme Brake Pads 8Shelby Plus Brake System 8Eradispeed+2 Brake Rear Set 9Lower Grille With Shelby GT500 Brake Ducts 9Shelby GT500 Brake Duct Bezel 9Shelby Plus Pro Front Brake System 9Shelby Brake Caliper Covers 9

Shelby Engine Systems 10Kenne Bell Superchargers 11Shelby GT500 Auxiliary Idler Kit 11Ford Racing Whipple Superchargers 12Shelby 4.6L High Performance Fuel Rail Kit 14Shelby GT500 Fuel Rail Kit 14Shelby Valve Covers 14Shelby GT500 Coil Covers 14Shelby Extreme Duty Coolant Tanks 15Shelby Extreme Duty Heat Exchanger 15Shelby Extreme Duty Radiator 154.6L Ford Racing Power Pack 16Shelby GT500 Short Throw Shifter 16Shelby Six Speed Shifter Lever 16Shelby Five & Six Speed Shifter 16Shelby Tensioner Support Plate 17Shelby GT500 Crankshaft Damper 17Shelby Hood Prop Rod 17Radiator Cover Panels 17Shelby Aluminum Drive Shaft 17Shelby 8.8” Axle Cover 17Shelby Redline Hood & Trunk Quicklift Kits 18Shelby Battery Hold Down Brackets 18Shelby 8-Quart Oil Pan 18Billet Strut Tower Caps 18Shelby Billet Engine Cap Sets 19Shelby GT500 Engine Cap Set 19Shelby GT500 Valve Coil Cover 19Shelby GT500 Engine Cap Set 19

Shelby Exhaust Systems 20Shelby GT500 Borla Touring Exhaust 20Shelby Borla Cat-Back & “X” pipe 20Shelby GT500 Borla Touring Exhaust System 21Shelby Turbo Mufflers 21Shelby GT500 Borla XR1 Long Tube Headers 21Shelby Exhaust Tip Covers 21Shelby GT500 Kooks Headers 21O2 Sensor Extension Harness 21Shelby GT500 Kooks Long Tube Header System 21Shelby GT500 Borla Touring Exhaust Mufflers 22Shelby Terlingua Side Exit Cat-Back Exhaust 22Shelby Terlingua Side Exhaust Heat Shield 22Shelby Muffler Delete System 22MRT MaxFlow H-Pipe, with Cats 22Shelby GT500 Borla Multicore Exhaust Mufflers 22

Shelby GT500 Borla XR1 Exhaust System 22MRT MaxThunder Axle-Back Exhaust 22MRT AeroTurbine Axle-Back Exhaust 23Magnaflow Magnapack Series Cat-Back System 23Magnaflow Comptetition Series Cat-Back System 23Magnaflow Street Series Cat-Back System 23MRT MaxThunder Axle-Back Exhaust 23Magnaflow Performance Series Cat-Back System 23

Shelby Exterior 10Shelby Hood Pin Kit 26Super Snake Hood Vents 26Shelby GT500 Super Snake Hood 26Shelby Carbon Fiber Front Splitter 10-11 27Shelby Quarter Window Covers 27Super Snake Quarter Window Scoops 27Shelby Billet Hood Pin Kits 27Shelby Carbon Fiber Front Splitter 07-09 27Quarter Window Interior Trim Plates 27Shelby Super Snake Side Scoops 27Shelby Hood Pin Install Kit 27Shelby Carbon Fiber Mirror Covers 28Shelby Billet Fuel Door 28Shelby GT Aluminum Grille: Upper 28Shelby GT Aluminum Grille: Lower 28Shelby GT500 Hood Vents 28Sequential Tail Light Kit 28Shelby Car Bra 28Ford Mustang V6 Billet Grille 28F150 Shelby Super Snake 29Shelby CS6 Front Fascia 30Shelby CS6 Side Scoops 30Shelby CS6 Rear Fascia 30Mustang V6 Chin Spoiler 30Shelby Windshield Banners 30Shelby CS6 Lower Grille 30Shelby CS6 Upper Grille Insert 30Shelby CS6 Hood 30Ford Mustang GT Chin Spoiler 30Shelby Convertible Top Boot 31Shelby Light Bar with 3rd Brake Light 31Shelby Trunk Liner 31Ducktail Rear Spoiler 31Shelby License Plate Frame 31Under-Hood Hardware Set 32Tail Light Trim 32Ford Mustang GT Grille Light Bezel 32Quarter Window Trim 32Shorty Billet Antenna 32Trunk Lock Emblem 32Hood Mounting Hardware 32Rear Quarter Light Trim 32Washer Nozzle Covers 32Antenna Base Cover 32Faux Gas Cap Trim Ring 32Shelby 3rd Brake Light Trim 32Trunk Lock Trim Ring 32Shelby GT Grille Emblem 33

Table of Contents

3(702) 405-3500

Shelby GT500 Trunk Lettering 33Cobra Side Emblems 33Fender Flag Emblems 33GT500 Side Emblems 33Shelby Trunk Lettering 33Powered by Ford Emblem 33

Interior Upgrades 34Shelby Gauge Pods 35Oil Gauge Adapter 35GT500 Carroll Shelby Signed Dash Plaques 35Leather Shifter Boot 35Shelby Upgraded Interior Package 36Shelby Headrests 36Shelby Leather Trimmed Console Lid Cover 36Shelby Headrest Cover 36Armrest Cover 36Emergency Brake Handle Wrap 37Shelby Windshield Sun Shade 37Door Lock Knobs 37Shelby GT500KR Door Sill Plates 37Shelby Pedal Covers 37Shelby Dead Pedal Covers 37Shelby Emergency Brake Handle Cover 42Automatic Transmission Shifter End Caps 42Satin Door Lock Knob Grommets 42Shelby Billet Shift Boot Trim 42Shoulder Belt Accent 42Shelby Satin Shift Boot Trim 42Lumbar Seat Switch Cover 42Seat Adjust Switch Cover 42Billet Coat Hooks 42Shelby Power Point Plug 42Seat Back Recline Levers 42Shelby Billet Cup Holder Trim 42Shelby Map Light Accent Trim 43Shifter Boot Retainer 43Shelby Billet Aluminum Shift Knob 43Shelby White Resin Shifter Knob 43Shelby White Shift Knob 43Shelby Center Dash Starter Button 435-Speed Block Shifter Knob 43Mustang White Shift Knob 43Super Snake Shift Ball 43Mustang Billet Aluminum Shift Knob 43Signature Floor Mats 44Shelby Signature Floor Mats 44Shelby Premium Floor Mats 44Rear Seat Floor Mats 44Shelby GT Floor Mats 44 Shelby GT500 Floor Mats 442006 Shelby GT-H Floor Mats 442007 Shelby GT-H Floor Mats 44Shelby Kicker Premium Sound System 45Shelby Kicker Audio Speakers 45Shelby Kicker 4.1 Channel Amp 45Shelby Kicker Audio Woofers 45

Shelby Kicker Audio Woofer 45

Suspension Systems 46Shelby GT500 Ford Racing “FR3” Handling Pack 47Ford Racing Shelby GT500 Sway Bar Kit 47Ford Racing “FR3” Handling Pack 47Eibach Suspension Kit Multi-Pro R2 47Shelby Eibach GT500 Front & Rear Sway Bar Kit 48Shelby Eibach Pro Coil Over Kit 48Shelby Sway Bar End Links 48Shelby Watts Link Suspension 48Shelby Bump Steer Kit 48Shelby American Caster Camber Plate 49Shelby Front Lower A-Arm 49Shelby Tubular K-Member 49Shelby Rear Lower Control Arms 49Shelby Panhard Bar with Race Rod Ends 50Shelby Panhard Bar Body Brace 50Shelby Adjustable Panhard Bar 50Shelby Sway Bar Delete Brace 50Shelby Front A-Arm Support Brace 50Shelby Upper Panhard Bar Support Brace 50Shelby Rear Axle Body Flex Brace 52Shelby Anti-Wheel Hop 52Rear Control Arm 52Relocation Brackets 52 Shelby Rear Upper Control Arm Bracket 52Shelby Front Drive Shaft Safety Loop 52Rear Drive Shaft Tunnel Brace 52Shelby Panhard Bar Relocation Bracket 52Rear Upper Control Arm 52Shelby Super Snake Engine Strut Bar 53Shelby GT Strut Tower Brace 53Shelby GT500 Strut Tower Brace 53Strut Tower Brace Aluminum Power Pack 53V6 Strut Tower Brace 53

Wheels & Wheel Accessories 54Shelby Alcoa Super Snake Wheels 54Shelby Razor Wheels 54Shelby Wheel Center Caps 55Shelby GT500 Center Cap Covers 55Carroll Shelby Wheel Spinner Center Caps 55Shelby Alcoa Wheel Center Caps 55Shelby CS40 Wheels 56Shelby CS56 Wheels 56Shelby CS69 Wheels 57Shelby CS67 Wheels 57

Die-Cast Collectibles 58

Shelby Hats 63

Shelby Apparel 64

Shelby Collectibles 69

Frequently Asked Questions 74

Shelby Extreme Braking SystemsSpeed is EasyStopping is NotIt’s much easier to churn out big horsepower than to make a muscle car stop on a dime, under control. Balanced performance is a thrilling combination of acceleration, handling and stopping fast. Since 1962, Shelby American has taken that approach with every car and part it offers. Leveraging the lessons learned by building the only American cars to win grueling races like the 24 hours of Le Mans and Sebring, Shelby has the experience necessary to develop world-class braking systems.By teaming with Baer, Shelby has created the “Extreme Shelby” brake products. These systems give you the absolute best in stopping power, over and over again. Baer/Shelby brakes will allow you to push a car to its limits with the confidence that only a superior system can deliver. Accept nothing less than Genuine Extreme Shelby brake systems.

Increased silicone rotor content material improves friction and temperature stability, while greater mass in the firepath boosts temperature absorption and aids in faster thermal recovery. We are so confident these rotors are superior, they offer the industry’s only limited lifetime warranty against warpage.

These low inertia aluminum monoblock calipers deliver unparalleled performance through a rigid one piece design-featuring precision CNC machined bores that houses 6 large stainless steel pistons, coupled with specifically designed seals to withstand the extreme high temperatures usually witnessed in actual racing applications


7(702) 405-3500

Shelby ExtremeBraking Systems

Shelby factory original equipment for the Shelby GT500 SuperSnake and other Shelby Mustang models, this complete brake package features extra-large 14” cross-drilled and slotted 2 piece zinc-plated rotors and a pair of huge 6 piston calipers, which houses Baer’s own Sport Touring Pads.

These low inertia aluminum monoblock calipers deliver unparalleled performance through a rigid one piece design-featuring precision CNC machined bores that houses 6 large stainless steel pistons, coupled with specifically designed seals to withstand the extreme high temperatures usually witnessed in actual racing applications. These are the ultimate in braking performance. Boldly powder coated, with our Shelby name proudly engraved on the side. These will certainly let everyone know you take Braking Performance very seriously.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT, GTH, GT500KR and GT350.

Item No: 4261112 Front Kit Our Price: $2,999.99 Item No: 4262113 Rear Kit Our Price: $3,775.00

Shelby Extreme Brakes

Black with red lettering, blue with silver lettering, orange with black lettering, red with black lettering, silver with blue lettering, yellow with black lettering, copper with black lettering, candy apple red with black lettering, grabber blue with black lettering.

Shelby Extreme Brakes Color Options


The Shelby Baer Plus Pro rear brakes are perfect for both street and casual racing applications. For optimum stopping performance, our brakes feature a 6-piston calipers with staggered bore sizes, which minimize brake pad taper. The 6-pistons are made from stainless steel to reduce thermal transfer from the caliper and brake pads into the brake fluid.

The most important piece to this brake package, however, lies within the caliperconstruction itself. Its 6.5lb., 2-piece construction employs 6-crossbolts to maximize caliper stiffness and rigidity. This equates into a caliper that maintains its shape under severe braking conditions. Further, the caliper and brake rotor interface better to provide the highest force possible while delivering the best “feedback” to the driver under the widest possible braking conditions. Finally, the caliper uses an external crossover tube or outside bleeder.

The Shelby Plus Pro system features 14”, curved vane directional2-piece rotors. Fits our 20” Alcoa Super Snake and Razor wheels. Download our template on our website for wheel fitment.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT, GT-H, GT500KR and GT350.

Item No: Z28-4262176R Our Price: $2,399.91

Shelby Plus Pro Brake System Rear

The Shelby Plus brake system greatly enhances stopping distance and reduces brake fade. These brakes are Shelby original equipment on the Shelby CS6 and CS8 models. The system include 2 huge 14” cross drilled and slotted 2 piece zinc plated rotors, large, 2 piston aluminum front calipers, oversized performance metallic pads, caliper relocating brackets, brake hoses and all necessary mounding hardware and instructions.

- Excludes V6 models that do NOT have the optional ABS.- Requires 18” wheels or larger. Will NOT fit stock 18” Shelby GT wheels.- Certain wheel spoke designs many not allow enough clearance for these oversized calipers

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT, 06-08 Shelby GT, GT-H

Item No: Z28-4261111 Our Price: $1,349.00

Shelby’s extreme ceramic brake pads are made to fit either the front or rear brake calipers of our extreme brakes and are Shelby factory original on the GT500 SuperSnake, Shelby Terlingua and other models. They feature a high performance, low noise compound with low amounts of light colored non-abrasive, non staining brake dust.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT, GT-H, GT500KR and GT350 with front or rear extreme brakes.

Item No: S5MA-2020 Starting at: $71.99 to $143.92

Shelby Extreme Brake Pads

Shelby Plus Brake System

9(702) 405-3500

Factory original Shelby equipment on GT500 SuperSnake and Terlingua models, this Baer brake “EradiSpeed-PLUS-TWO” package combines performance and proven durability with brilliant visual impact. Increased silicone rotor content material improves friction and temperature stability, while greater mass in the firepath boosts temperature absorption and aids in faster thermal recovery. Add to that the dynamic look of cross-drilled, slotted and zinc-plated surfaces, and these rotors are sure to turn heads! In fact, Baer is so confident these rotors are superior, they offer the industry’s only limited lifetime warranty against warpage.

- This brake upgrade package includes matching 14” cross drilled and slotted rotors, relocating brackets for calipers and necessary hardware.- 2-Piece (aluminum hat and iron disc) rotors provide LITE™* direct replacement for OE applications- INCREASED DIAMETER rotor upgrade systems employing OEM calipers- Increased rotor diameter = greater leverage and improved brake torque- Rotors are LARGER than the OE units they replace and are designed for use with larger than stock wheels.- Includes specialized caliper hardware to properly accommodate installation- Are always directional with curved vanes.- Feature crossdrilled, slotted and zinc coated surfaces!- Excludes V6 models that do NOT have the optional ABS.- Requires 18” wheels or larger.


Item No: 2262019 Our Price:GT500: $695.00Item No: Z28-2261026 V6,GT: $755.00

Eradispeed+2 Brake Rear Set

Factory original on the 2008-2009 Shelby GT500KR, these grilles can also be used on 2007-2009 GT500s for those who wish to use them with brake cooling ducts.

Application: 07-09 Shelby GT500

Item No: 7S3Z-17K945-AA Our Price: $209.95

Lower Grille With Shelby GT500 Brake Ducts

Factory original on the 2008-2009 Shelby GT500KR, these bezels fit in the lower grille assembly. A 2.5” hole in your lower grille is required, or you can purchase a new GT500 lower grille with pre-cut 2.5” holes here.


Item No: 7S3Z-2K004/5-K Our Price: $124.95

Shelby GT500 Brake Duct Bezel

The Shelby Plus-Pro brake system feature Baer’s all new “6P-Series” CNC’ed forged aluminum six-piston radial mount calipers, ceramic sport touring compound pads, 14x1.15-inch two-piece rotors and DOT legal braided stainless steel, Teflon lined hoses and all attendant hardware. Baer’s rigid quality standards together with these elements combine to offer the lightest 14-inch 6-piston setup as well the most performance per dollar of any system in this segment. Features internal crossovers fore and aft to allow a single bleeder located on inboard side.

- Requires 18” wheels or larger.

Brake Caliper Color Options: Black with red lettering, Blue with silber lettering, Orange with black lettering, Red with black lettering, Silver with blue lettering.


Item No: Z28-4261XXXR Our Price: $1,895.00

Shelby American’s brake calipers covers are made by MGP. They increase wheel appearance while reducing brake dust and feature easy installation - without tape glue or special tools being required. They are made from TIG welded 6061-T6 aluminum and power coat finished.


Item No: Z36-S5MC-2300-A Our Price: $175.00

Shelby Plus Pro Front Brake System

Shelby Brake Caliper Covers

Engine Systems

Shelby Performance Engine Systems

10

Shelby PerformanceEngine Systems

Superchargers and Engine PerformanceIn 1962 Carroll Shelby dropped a small block Ford 289 engine into a little AC chassis. He shoved as much horsepower into the little racer as he could while still maintaing the balance and performance that won races such as Sebring and Le Mans. At Shelby Performance Parts we continue that tradition by offering you only the best in superchargers and engine performance parts. If you want to get the absolute best out of your Mustang or Shelby, look nowhere else.

11(702) 405-3500

You can spend more money on exhaust, headers, cool air, chip, cam etc. and not get anywhere near the performance you would from a supercharger kit. OEMs are now resorting to supercharging for big performance gains. Kenne Bell superchargers run efficiently so there is less parasitic loss than most other superchargers. These are available for the 4.6 3 valve engine and the 07-11 Shelby GT500 5.4 engine. We also carry both the 2.8 and 3.6 liter liquid cooled big bore superchargers. The patent pending liquid cooling allows for higher horsepower at the same boost levels by giving cooler air charge temperatures, as well as cooler oil temperatures.

For more details on individual superchargers and their packages, please visit www.ShelbyPerformanceParts.com or call us at 702-405-3500.

Z16-S7SE-6600-E: 07-09 5.4L 07-09 Manual Black 750 Kenne Bell Our Price: $6,499.99Z16-S7SE-6600-E: 07-09 5.4L 07-09 Manual Polished 750 Kenne Bell Our Price: $7,199.99Z16-S7SE-6600-E: 2010 5.4L 2010 Manual Black 750 Kenne Bell Our Price: $6,295.00Z16-S7SE-6600-E: 2010 5.4L 2010 Manual Polished 750 Kenne Bell Our Price: $6,595.00Z16-S7SE-6600-E: 3.6L Liquid Cooled Kenne Bell supercharger Our Price: $6,999.00Z16-TS1000-SHEL28LC: 2.8L Liquid Cooled Supercharger Our Price: $6,249.00Z16-SHE-KB-46-TSS-P: Shelby GT 2.6L Polished Super Charger Our Price: $6,449.00Z16-SHE-KB-46-TSS: Shelby GT 2.6L Black Super Charger Our Price: $6,999.00

Kenne Bell Superchargers

This “Shelby” engraved auxiliary idler kit was designed for Shelby GT500s using Kenne Bell superchargers and engineered to be a simple bolt-on to be the ultimate solution to belt slippage.

The kit consists of a heavy-duty, precision machined aluminum plate and a billet 90mm idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions. Includes black-oxide coated mounting hardware.


Item No: S7SE-8509-A Kenne Bell supercharger Our Price: $266.15 Item No: S7SE-8509-B Stock or Whipple supercharger Our Price: $238.70

Shelby GT500 Auxiliary Idler Kit

The Ford Shelby GT500 Super Snakeis powered by a Kenne Bell supercharger


If more power is what you crave…Whipple Superchargers has the solution…heart-stopping acceleration, complete bolt-on packages, emissions legal supercharger kits that boost power up to 60%. By utilizing the Whipple Twin Screw Supercharger, we provide the largest effective power gains, while maintaining safe, trouble-free operation. The Whipple Charger gives you the unique combination of maximum power at low RPMs for incredible driveability while still providing ultra high efficiency for top-end horsepower. Just squeeze the throttle and the engine responds immediately, from idle to redline. The thrill ride never stops!

The results are breathtaking…0-60 times drop dramatically, up to 60% power increases throughout the operating range, incredible throttle response, emission compliance and virtually maintenance-free. How is this possible? It’s the integration of the Whipple Twin Screw Supercharger and Whipple’s superior engineering that makes it all possible.

Over the past fifteen years, Whipple Superchargers has risen above the competition to become the true supercharging leaders with proven performance, reliability, customer service and quality. Other companies claim to be leaders with incredible power levels, but the results speak for themselves.

Warranty Note:2007 Shelby GT500s must use the upgraded engine damper M-6312-SVT to be eligible for limited warranty.

For more details on individual superchargers and their packages, please visit www.ShelbyPerformanceParts.com or call us at 702-405-3500.

Z15-M-6066-SGT 07 - 09 5.4L 07-09 Manual Black 605 554 Ford Racing Our Price: $4,995.00Z15-M6066-MSVTA 2010 5.4L 2010 Manual Black 660 619 Ford Racing Our Price: $4,995.00Z15M-6066-MSVT29C 2010 5.4L 2010 Manual Black 750 719 Ford Racing Our Price: $6,295.00Z15M-6066-MSVT29PC 2010’ 5.4L 2010 Manual Polished 750 719 Ford Racing Our Price: $6,595.00Z15M-6066-MGT475A 4.6L 2007 Automatic Black 475 442 Ford Racing Our Price: $6,995.00Z15M-6066-MGT475PA 4.6L 2007 Automatic Polished 475 442 Ford Racing Our Price: $7,239.00Z15M-6066-M117 4.6L 2007 Manual Black 550 542 Ford Racing Our Price: $6,995.00Z15M-6066-M11P7 4.6L 2007 Manual Polished 550 542 Ford Racing Our Price: $7,239.00Z15M-6066-MGT475B 4.6L 08-09 Automatic Black 475 442 Ford Racing Our Price: $7,029.00Z15M-6066-MGT475P 4.6L 08-09 Automatic Polished 475 442 Ford Racing Our Price: $7,269.00Z15M-6066-M11B8 4.6L 08-09 Manual Black 550 542 Ford Racing Our Price: $7,239.00Z15M-6066-M11P8 4.6L 08-09 Manual Polished 550 542 Ford Racing Our Price: $7,269.00

Ford Racing Whipple Superchargers

13(702) 405-3500


These Shelby American coil covers are made from aluminum, chrome plated and then powder coated with a black wrinkle finish. The coil covers are then machined with the classic Shelby race track logo. The polished art work pops dramatically through the black finish.

Application: 2007-2011 Shelby GT500Item No: S7ME-6067-D Our Price: $177.50

Shelby GT500 Coil Covers

Shelby GT500 High Performance Fuel Rail Kit

Shelby 4.6L High Performance Fuel Rail Kit Made by Metco for Shelby American, these precision machined fuel rails are made from billet aluminum, not commonly available extruded rail stock like other fuel rail kits.

Because these rails are CNC-machined from billet, they were designed with the largest internal diameteravailable for this application at 11/16”. The kit includes a custom-made braided stainless steel fuel crossover line with swivel fittings, a port plug for the front of the passenger side rail and an adapter provision for the front of the driver’s side rail. These rails can be used with the factory returnless fuel system or with a custom return-style fuel system.

Two 1/8” NPT ports (not shown) are located at the front of the passenger side rail to facillitate the installation of a fuel pressure gauge, to provide a fuel supply for a nitrous system, or both. Pipe plugs are included to seal any unused ports.

Includes precision-bent stainless steel mounting brackets and stainless fasteners to attach the rails to the OEM mounting brackets.

Application: 07-08 Shelby GT and 05-10 Mustang GT

Item No: S5ME-9593-A Our Price: $319.63*Rail Adapter (required), Item No: S5ME-9593-B, Our Price: $84.22

These Shelby American high performance Shelby GT500 precision machined fuel rails are made from billet aluminum, not extruded rail stock and feature an 11/16” internal diameter passage for maximum fuel delivery.

The rails include the provision to mount the factory fuel pressure sensor, and have two 1/8” NPT ports ahead of the sensor mount to allow for the installation of a fuel pressure gauge or sender and to provide a fuel

supply for a nitrous injection system. The ports are angled away from the blower case to ensure adequateclearance for bulky electric pressure sending units.

A special adapter* is available separately to mate the front of the driver’s side fuel rail tothe factory fuel feed line. Please note that no fittings or connectors are included with the

fuel rail set. Engraved “Shelby,” they are clear anodized for long lasting surface protection. Includes precision-bent stainless steel mounting brackets and stainless fasteners.

* A special adapter is required to mate the front of the driver’s side fuel rail to the factory fuel feed line.


Item No: S7SE-9593-A Our Price: $309.31* Rail Adapter (required), Item No: S7SE-9593-B Our Price: $49.99

Our Shelby die cast, 4.6L aluminum valve covers are black powder coated and are factory OEM style replacements.

Application: 06-08 Shelby GT, GT-H and 05-10 Mustang GT

Shelby GT Item No: S5ME-6582-A Our Price: $294.35 Shelby Logo (pictured) Item No: S5ME-6582-B Our Price: $294.35

Shelby Valve Covers

*

*

15(702) 405-3500

Whether your Shelby is bone stock or highly modified, supercharged cars get heat soaked. Shelby has discovered the solution: The Shelby Dual Pass/Dual Puller Fan Heat Exchanger.

Designed by Shelby and C&R, our extreme duty heat exchanger uses a proprietary NASCAR core which features a single row core with a dual pass system.

The intercooler and heat exchanger within the Shelby GT500 build higher temperatures in normal, spirited or on-track driving conditions. With a stock Shelby GT500 the car has an on board computer program which begins to curb spark and timing at 100 degrees. 100 degrees within the intercooler and heat exchanger can be achieved within minutes of starting the vehicle. Aftermarket tuners change this parameter to begin the timing and spark curb trend at 130 degrees to 140 degrees. Almost all supercharged vehicle owners can comprehend the power difference in their car when they first start it and drive versus 20 minutes later when the car just doesn’t seem as willing to spin the tires. This is what is called heat soak.

There are two puller fans each pulling 709 CFM. That 1,418 CFM of air flow across the core of the heat exchanger pulls the heat out of the fluid in the intercooler and heat exchanger.

Application: 07-11 Shelby GT500, 05-10 Mustang GT, 06-08 Shelby GT, GT-H

Item No:Z12-CR-GT5-CPR002B Our Price: $770.00

Shelby Extreme Duty Heat Exchanger

Developed by Shelby and C&R, the premier motor sport engineering company, these Shelby extreme duty cooling radiators can reduce engine and cylinder head temperatures by up to 50 degrees in spirited driving conditions.


Item No: Z12-CR-CPR001 Our Price: $770.00

Shelby Extreme Duty Radiator

Shelby Extreme Duty Coolant TanksDesigned by Shelby and C&R, this 3-piece coolant reservoir tank complements the Shelby extreme duty radiator and heat exchanger. Each reservoir is hand made from the highest quality aluminum available and is offered in bare aluminum or black anodized.

The Engine Coolant Reservoir comes with a laser etched Shelby Logo. Additionally, Shelby is first to market with a complete package of engine bay reservoirs, Engine Coolant Overflow, Higher capacity and Higher flow Supercharger Reservoir and Power Steering Reservoir that accept the factory cap fitment. This means that you can retain your Billet Aluminum Shelby Engine Caps.

4.6L engines with a superchargers require the Shelby GT500 radiator tank for proper fitment under the hood. Package will not work with Paxton/Vortech Superchargers.


Item No: Z12-CR-CPA001 Our Price: $882.00Black Anodized, Item No: Z12-CR-CPA001 Our Price: $982.00


This Ford Racing power pack adds approximately 20 horsepower and 50 state legal horsepower.

KIT INCLUDES:• 90mm Cold Air Kit M-9603-GT06 with washable/reusable filter -- SAVES MONEY• Muffler Kit M-5230-GTA• Performance Oil Filter M-6731-FL820• Pro-Cal tool voucher included with kit• Requires premium fuel only• DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE• 50-States “Street Legal” (E.O. #D-598)


Item No: M-2006-FR1 Our Price: $869.00

Engineered by Shelby American, these five speed manual transmission shifters are designed for extreme usage while being perfectly suitable for street applications. They greatly improve shifting over the factory design.• Main base and strut bar are machined from 6060-T6 billet aluminum and anodized for corrosion protection.• High durometer polyurethane injected bushings isolate noise and vibration for precision feel and comfort.• High alloy heat treated and nickel plated pivot lever gives the ultimate in strength and durability which pivots in a custom injected Delrin pivot cup. This prevents wear in the area that sees the most contact and also further reduces stick vibration and noise.• Spring tension prevents missed shifts by forcing you into 3rd gear.• Unique adjustable cam shaft stops provide a positive stop to prevent over travel in the linkage that causes damage to the transmission under hard use.• Revised pivot ratio for shorter, faster throws and quicker shifts.• Exclusive light weight forged 7075 aluminum shift lever with MIL spec radius root threads for uncompromised strength.• Rear mount shift lever prevents putting mount bolts in rear. (5.4L engines)• Two support bars and two shift stops. (5.4L engines)Shifter knob sold separately, does not fit stock shifter knob.

Application: 07-11 Shelby GT500, 05-09 Ford Mustang GT, 06-09 Shelby GT, GTH, GT500KR

Item No: 7S3Z-7210-F6 Our Price: $349.95 (6 Speed, 5.4L)Item No: 7S3Z-7210-F5 Our Price: $299.95 (5 Speed, 4.6L)

4.6L Ford Racing Power Pack

Shelby Five & Six Speed Shifter

Developed by Ford Racing, this short throw shifter was designed with a 25% reduction in throw for more precise and quicker shifting.

Features urethane body vibration isolators. Bolts into stock location, uses factory stick and knob.


Item No: M-7210-B Our Price: $205.00

Ford Racing Shelby GT500 Short Throw Shifter

Upgrade your factory Shelby GT500 shifter by replacing the rubber bushed lever with our heavy duty, light weight forged 7075 aluminum lever that includes high durometer polyurethane isolators for more precise shifts. Stamped on both sides with “Shelby.” Shifter knob sold separately.


Item No: 7S3Z-7210-SL6 Our Price: $124.95

Shelby Six Speed Shifter Lever

For our full line of Shifter Knobs go to our Interior section located on page 49.This shifter knob is made out of high quality white resin and is embossed with the 6 speed shift pattern and the iconic Super Snake stripe in black with “Shelby” on each side.


Coming Soon, visit www.ShelbyPerformanceParts.com for details

Shelby Super Snake Shifter Knob

17(702) 405-3500

The Shelby GT500 factory original crankshaft damper has one major deficiency: it weighs 22lbs.! This replacement damper, which is factory original for 2008+ GT500s is 10lbs. lighter and weighs only 12lbs. The

result is a reduction in rotational mass, which means greater performance and extended engine life. Required by Ford for certain Supercharger upgrades.

Application: 2007 Shelby GT500, 6-08 Shelby GT, GT-H and 05-10 Mustang GT

Item No: M-6312-SVT

Our Price: $289.00

Shelby GT500 Crankshaft Damper

If you want to strengthen your 8.8” rear axle, Shelby American has the perfect solution. Our 8.8” axle cover/girdle is made from super strong 356-T6 aluminum and was designed to improve ring and pinion strength. Will clear factory panhard bar, will not fit with Fays2 watts link, includes gasket and new fasteners. Also has easy access drain plug.

Application: 07-11 Shelby GT500, 05-09 Ford Mustang GT, 06-09 Shelby GT, GT-H, GT500KR

Item No: S7SA-4032A Our Price: $209.99

This Shelby engine hood prop rod features a highly polished stain-less steel construction. Includes mounting brackets.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang GT & V6, 06-09 Shelby GT, GT-H, GT500KR

Item No: E5RZ-16826-S Our Price: $24.95

Shelby 8.8” Axle Cover

Engraved with the famous Shelby Racing Logo, this billet aluminum plate was designed by Metco as a solution to the problem of the factory Ford belt tensioner deflecting under load in supercharged applications. The factory tensioner arm tends to flex toward the front of the vehicle under heavy belt loads, allowing the belt to slip. Adding boost with custom pulleys or adding an aftermarket supercharger to your vehicle loads the belt further, compounding the flex problem.

This brace is CNC-machined from 6061-T6 aluminum and is then finish-anodized in black for long-lasting surface protection. The brace simply bolts over the factory tensioner using the provided longer bolts, and when installed, prevents the tensioner from bending outward. A special Delrin insert is installed in the back of the brace to prevent metal-to-metal contact when the tensioner is heavily-loaded.

The kit is a complete bolt-on, and requires no cutting, drilling, or any irreversible changes for installation. The kit includes the precision-machined billet plate with the Delrin insert, three aluminum spacers, and three Grade 8 cap screws with washers.


Item No: S5ME-19216-A Our Price: $72.10

Shelby Tensioner Support Plate

These high performance, 1-piece aluminum drive shafts are about 21 pounds lighter than the stock 2-piece units, which means less rotational mass and more usable horsepower at the wheels. Highly recommended when upgrading to supercharged applications. The 5.4L drive shaft is factory original on 725 and 750 HP Shelby GT500 Super Snake models. Also available for 4.6L engines.


Item No: PM/C-6061 Our Price: $799.99

Shelby Aluminum Drive Shaft

This radiator cover panel has been modified by Shelby American to accept our 05-09 hood pin kits. These do not have a provision for a prop rod. Carbon fiber version does not have provision for a prop rod.

Application: 07-09 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-08 Shelby GT, GT-H

4.6L Item No: 5R3Z-8C291-AAA Our Price: $79.954.6L (Carbon Fiber Version) Item No: S5MB-20201 Our Price: $349.415.4L (Carbon Fiber Version) Item No: S5MB-20201 Our Price: $349.41

Radiator Cover Panels

Shelby Hood Prop Rod


Shelby 8-Quart Oil Pan Shelby’s high performance 8-quart oil pans feature an anti-oil slosh baffle and four trap door baffles, which make it a perfect addition for those who drag and road race their Mustangs. Our oil pans are finished in a gloss black powder coating with the “Shelby” text and racing logo.

Eight quart oil capacity (not including oil filter).Uses factory dipstick.Works with factory oil pump pickup.Has provisions for supercharger drain back and oil temperature sender.Includes magnetic oil pan plug.Does not includes oil pan gasket.


Item No: S5SE-6675-A Our Price: $389.28

Designed by Redline, these Shelby branded hood lifts utilize two gas-springs that lift and hold your hood without the need for a prop-rod. Simply start to lift your hood and let the QuickLIFT system take over. Your hood will lift and hold firmly at the raised position - no wind or bumping will knock it down on your head. - No compromise system - We design our systems from start to finish - we mount the gas springs where they need to be for proper function... we utilize stock bolt locations when available, but we never compromise functionality of the system for the sake of it being ‘bolt-in’.- Simple one-handed operation, simply start to lift the hood and it will raise to the stock height unassisted in a smooth and controlled motion.- QuickLIFT systems work with any hood, Quick and simple installation.


PLUS - All black components, including black e-coated gas springs, black shafts, ball-stud end fittings & black powder-coated brackets (from the ELITE system) along with the best anaerobic-coated-urethane mounting hardware.

ELITE - For those who want the best money can buy - QuickLIFT ELITE. Includes the ultimate 316L Stainless Steel gas springs, black powder-coated brackets.

Hood:

Quicklift Plus, Item No:S5MB-16612 Our Price: $84.95 Quicklift Elite, Item No:S5MB-16612 Our Price: $119.95 Trunk:

Quicklift Plus, Item No:S5MB-16612-C Our Price: $79.95

Shelby Redline Hood & Trunk Quicklift Kits

Machined from 6061-T6 billet aluminum, these caps come in a set and include ten (10) caps to dress up both sides of your engine compartment. Clear anodized.


Item No: 5R3Z-7W13296-BL Our Price: $99.95

Billet Strut Tower Caps These billet aluminum, Shelby engraved battery hold down brackets replace the black, factory style. Machined “Shelby” painted in guardsman blue.


Item No: 5S3Z-10718-SL Our Price: $64.95

Shelby Battery Hold Down Brackets

19(702) 405-3500

Add genuine Shelby performance looks to your engine with these billet aluminum caps from Shelby Performance Parts. Machined from 6061 billet aluminum, each cap features a Shelby logo stamped brightly. Sold as a set. * Windshield washer fluid cap does not fit 2010+ models.Also available individually, See ShelbyPerformanceParts.com for details.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT, GT-H, GT500KR and GT350

Shelby Logo, Item No: P53Z-CAPS Our Price: $274.95Shelby GT Logo (4.6L only), Item No: 7S3Z-GT-CAPS Our Price: $274.95

ShelbyGT-H Logo (4.6L only), Item No: 7S3Z-GTH-CAPS Our Price: $274.95

Shelby Billet Engine Cap Sets

Made of 6061 billet aluminum, these engine caps are specifically made for the 2007-2011 Shelby GT500. Each cap features the “Shelby GT500” script, which is stamped and brightly painted guardsman blue and red. For 5.4L engines only. Note the windshield washer fluid cap does not fit 2011+ models. 7 Piece Set Includes: Engine oil cap, coolant caps (2), dip stick handle, power steering fluid cap, brake fluid cap, washer fluid cap.

Application: 07-11 Shelby GT500 and GT500KR

Item No: 8S3Z-GT500-CAPS Our Price: $324.95

Shelby GT500 Engine Cap Set

Made in the U.S.A., these machined coil covers are sold as a pair. Available in satin, black, blue, and red. (Must prove ownership on Shelby GT500 Super Snake and Shelby GT500KR versions)


GT500, Item No: Z30-S7SE-6067-A Our Price: $359.00GT500 Super Snake, Item No: Z30-R-S7SE-6067-C Our Price: $453.00

GT500KR, Item No: Z30-R-S7SE-6067-B Our Price: $453.00

Shelby GT500 Valve Coil Cover

These billet aluminum Shelby GT500 engine cap sets are made in the U.S.A. and really make your Shelby’s 5.4L engine sparkle. 8-piece set. Available in satin, black, blue, or red, with or without stripes.


Item No: Z30-S7ME-6766-A Our Price: $589.00 Carbon Fiber Item No: Z30-S7ME-6766-A Our Price: $689.00

Shelby GT500 Engine Cap Set

Exhaust Systems

Shelby PerformanceExhaust Systems

An important part of the experience in owning a muscle car is enjoying the throb of the exhaust. Shelby exhaust systems are engineered to deliver maximum performance, both to the pavement and to the ear.

Used as Shelby factory original equipment on the Shelby GT500 SuperSnake, this Borla Cat-Back™ exhaust features patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you’d expect from the world’s most experienced (and most winning) exhaust brand.


Item No: 140222 Our Price: $829.00

Shelby GT500 Borla Touring Exhaust

This Borla Cat-Back system features a straight through, multi-core technology. Not only does it produce a distinctive sound, it was designed to increase exhaust velocity, which adds to increased horsepower and fuel economy. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit.

Application: 07-10 Shelby GT500, 05-10 Ford Mustang GT, 06-08 Shelby GT & GT-H

Item No: Z20-140266 Our Price: $1,269.04

Shelby Borla Stainless Steel Cat-Back & “X” pipe

ShelbyPerformanceParts.com20

Shelby stainless steel bright finished exhaust tips that feature the Shelby script logo. Slips over stock exhaust tips. Welding required, sold in pairs.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang GT, 06-08 Shelby GT, GTH

Item No: P5S3Z-5255-S,

Our Price: $74.99

The specially tuned long tube headers are made from lightweight yet durable austenitic stainless steel. The headers feature 1-3/4” tubes (found on Miller Cup Mustangs), with full merge collectors, which result in an incredible increase in torque performance. These are only recommended for competition usage and only on Shelby GT500s with extensive performance upgrades. They are not recommended for emission controlled vehicles. Features warp proof flanges, factory GT500 OEM sensor compliant for use with factory ECU. Starter, clutch and flywheel can be changed with removal of headers. Lightweight austenitic stainless steel construction (superior to 409 or aluminized steel).


Item No: Z20-17243 Our Price: $989.51

This touring Cat-Back system emits a sound just slightly louder than a factory Shelby GT500. It features a high-quality austenitic stainless steel construction, ultra-smooth mandrel-bent 2.5” tubing, flawless welding from master craftsmen, mirror-polished 4” diameter angle-cut 12” dual tips with rolled edges. Includes Borla 1,000,000 mile warranty through Borla direct.

Application: 2010 Shelby GT500

Item No:Z20-140321 Our Price: $769.00

Shelby GT500 header by Kooks feature 1-3/4” primary tubes with 3” collector.


Item No: Z21-6027,Our Price: $992.72

These 100% bolt on long tube fast flowing headers are made from mandrel bent high-grade 304 stainless steel by Kooks and are regarded as the ultimate GT500 system. Installation hardware and detailed instructions included.

Primary tube: 1-3/4” Collector: 3”Inlet: 3”Outlet: 3”


Item No: Z21-6025-CX (Catted), Our Price: $1,399.21

Item No: Z21-6025-OX (Non-Catted), Our Price: $1,369.00

Shelby Exhaust Tip Covers

Shelby GT500 Borla XR1 Long Tube Headers

Shelby GT500 Borla Touring Exhaust System

Shelby GT500 Kooks Headers

Shelby GT500 Kooks Long Tube Header System

If you’re looking for a more aggressive sound and a performance gain from your Mustang GT, Shelby GT500 or Shelby GT, these Borla Turbo mufflers are the answer. Sold as a pair, replaces the “over the axle” pipes, mufflers and exhaust tips.

Constructed from austenitic stainless steel.



Shelby Turbo Mufflers

Changing the exhaust mid-pipe on 2005+ Mustang requires the addition of one O2

Extension. Shelby’s O2 exhaust harness extension is made from high quality Ford

OEM connectors and a heat resistant wrap around the wires.

Application: 07-10 Shelby GT500, 05-10 Ford Mustang GT & V6, 06-09 Shelby GT, GTH, GT500KR

Item No: Z32-90Z001 Our Price: $21.92

O2 Sensor Extension Har-ness

21(702) 405-3500


MRT MaxThunder Axle-Back Exhaust offers a rumble that epitomizes the sound of all-American performance. The chambered MRT MaxThunder muffler provides a classic, muscular exhaust sound. The exhaust features 304 stainless steel tubing and mufflers of aluminized steel. Installation of the exhaust is simple and drill-free. The MRT Axle-Back clamps-on directly in place of the factory axle-back. 3.5” polished stainless steel exhaust tips come welded to the axle-back and are included with purchase of the exhaust system. Easy, direct bolt-on installation.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang GT, 06-09 Shelby GT, GT-H

Item No: Z32-91A201 Our Price: $519.00

Need more intense muscle-car sound and performance? Shelby has the answer: Simply delete your rear exhaust mufflers with our muffler delete system. This system will give your Shelby or Mustang a louder, attention getting sound. Bolt on installation, no drilling or welding required. Manufactured in the U.S. from 304-grade stainless steel making it light, yet durable. Includes 3.5” welded-on polished stainless steel exhaust tips.


Item No:Z32-9A150 Our Price: $274.99

MRT’s Stainless Steel “MaxFlow” H-pipe available for the 2005-2010 Mustang GT, the only H-Pipe exhaust system on the market with that deep exhaust sound we love! Made of 304 stainless steel, includes bell-mouth flanges for a leak free seal and premium hi-flow cats that allow your Mustang to breathe much, much easier. All H-pipe systems are built from high grade stainless steel using a computerized CNC man-drel bender for precision fitment and stainless rod welds for guaranteed years of worry-free performance. Requires the purchase of one O2 extension.

Application: 05-10 Ford Mustang GT, 06-08 Shelby GT and GT-H

Item No: Z32-93A200, Our Price: $515.99

Made from aircraft-grade T-304 stainless steel, these mufflers are both lighter and stronger than the factory GT500 exhausts, plus they add an extra 7-10% increase in horsepower and torque! They are designed to easily and accurately replace your factory pieces. Includes Borla 1,000,000 mile warranty through Borla direct.

Applications: 2010 Shelby GT500


These heat-shield plates are used on the Shelby Terlingua’s rocker panels to protect them from the side exhaust’s heat. Sold as a pair.

Applications: 05-09 Ford Mustang 4.0L V6 and 07-09 Shelby GT500

Item No: TER002 Our Price: $72.00

Designed for the 2010 Shelby GT500, these touring mufflers are made from T-304 aerospace grade stainless steel. They feature a 2.5” stainless steel, polished tip. Borla 1,000,000 mile warranty directly through Borla.


Item No: Z20-11780, Our Price: $619.34

Developed by Shelby American for use on the Shelby Terlingua.

Applications: 05-09 Ford Mustang 4.0L V6 and 07-09 Shelby GT500


These BORLA “140210” exhaust systems are offered as optional factory equip-ment on the 2007-2009 Shelby GT500 SuperSnake. This design features a complete package, starting with a tuned Cat-Back™ exhaust incorporating S-style straight-through mufflers that create more flow, weigh considerably less than stock and have that incredible bold BORLA signature sound.

• Includes high quality 3” Borla exhaust tip.• Testing has shown power increases above 20 horsepower alone. • Polished exhaust tips only.• This exhaust system is backed by BORLA’s unsurpassed written million-mile warranty.

Applications: 07-09 Shelby GT500 .


Shelby Terlingua Side Ex-haust Heat Shield

Shelby GT500 Borla Touring Rear Exhaust Mufflers

MRT MaxThunder Axle-Back Exhaust

Shelby Terlingua Side Exit Cat-Back Exhaust

Shelby GT500 Borla XR1 Exhaust System

Shelby Muffler Delete System

Shelby GT500 Borla Multi-core Exhaust Mufflers

MRT MaxFlow H-Pipe, with Cats

23(702) 405-3500

This Magnaflow cat-back competition system features 3” diameter tubing with dual 5” round mufflers and 4” polished tips. Includes a lifetime warranty through Magnaflow.

Specifications:3’’ Diameter tubingDual rear exit mufflersDual 5” round mufflers4” polished tips

Applications: 2011 5.0L, 2011 Shelby GT500


Made from 304 stainless steel in the U.S., the 304 stainless steel tubing and a muffler of aluminized steel. The muffler is resistant to heat damage and corrosion, meaning enhanced sound and performance for years to come. Installation of the exhaust is simple and drill-free. The MRT Axle-Back clamps-on directly in place of the factory axle-back. 3.5” polished stainless steel exhaust tips come welded to the axle-back and are included with purchase of the exhaust system. Features 304 stainless steel tubing and aluminized steel MaxThunder muffler. Includes 3.5-inch polished stainless steel exhaust tips and delivers a classic, muscular exhaust note. Easy, direct bolt-on installation.

Application: 05-10 Ford Mustang V6

Item No: Z32-91A101 Our Price: $224.99

This Magnaflow cat-back street system features 3” diameter tubing with dual 5” round mufflers and 4” polished tips.Includes a lifetime warranty through Magnaflow.

Specifications:3’’ Diameter tubingDual rear exit mufflersDual 5” round mufflers4” polished tips

Applications: 2011 5.0L, 2011 Shelby GT500


The MRT AeroTurbine Axle-Back Exhaust for the 05-09 Mustang V6 offers tasteful performance sound that turns heads for the right reasons. The free-flowing MRT AeroTurbine muffler provides an aggressive exhaust note. It opens up in the higher RPM range to attract the attention you crave. The MRT AeroTurbine Axle-Back Exhaust features construction from the highest quality 304 stainless steel, making it light-weight and durable. Installation of the exhaust is simple and drill-free. The MRT Axle-Back clamps-on directly in place of the factory axle-back. 3.5” polished stainless steel exhaust tips come welded to the axle-back and are included with purchase of the exhaust system. Features 304 stainless steel tubing, aluminized steel MaxThunder mufflers, 3.5-inch polished stainless steel exhaust tips included. Delivers a classic, muscular exhaust. Easy direct bolt-on installation.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang V6

Item No: Z32-91A100 V6 4.0L: Our Price: $259.99Item No: Z32-91A200 V8 5.4L (GT500): Our Price: $519.00

The Magaflow “Magnapack” cat-back system is performance tuned and produces a more aggressive sound than the performance series. It’s made from 100% stainless steel and features 3” diameter pipes with 4” polished tips..Includes a lifetime warranty through Magnaflow.

Specifications:3’’ Diameter tubingDual split rear exit mufflers4” polished tips

Applications: 05-09 4.6L, 07-09 Shelby GT500


MRT AeroTurbine Axle-Back Exhaust

MRT MaxThunder Axle-Back Exhaust

Magnaflow Magnapack Se-ries Cat-Back System

Dyno tested and proven to make gains in both horsepower and torque, this great sounding system has a smooth, deep tone. It features 100% stainless steel cat-back street system features 2.5” diameter tubing with 4” double-wall, angle cut polished tips. Includes a lifetime warranty through Magnaflow.

Specifications:2.5’’ Diameter tubingDual split rear exit mufflers4” polished tips

Applications: 05-09 4.6L, 07-09 Shelby GT500


Magnaflow Comptetition Series Cat-Back System

Magnaflow Performance Series Cat-Back System

Magnaflow Street Series Cat-Back System


25(702) 405-3500

Exterior

These black powder coated hood vents fit the 07-09 Shelby GT500 Super Snake hood and are sold as a pair.

Application: 07-09 Shelby GT500 with Super Snake Hood

Item No: M-2006-FR1 Our Price: $199.95

Shelby Exterior &Enhancement Parts

Striking Cosmetic and Exterior PerformanceNot only must a muscle car perform, it must look good while passing the competition. So whether it’s that aggressive Shelby look you want on your car or some new styling cues, we’ve got you covered. And genuine Shelby Performance Parts are more than just a typical snap-on part. Our parts also improve performance such as Mustang hoods with functional scoops and fascias with fully functional brake ducts.

Shelby factory original equipment for the 2007-2009 Shelby GT500 SuperSnake,this lightweight fiberglass hood is a direct bolt on to give your GT500 a menacinglook. This hood features two functional hood heat extractors (sold separately),which are available here. Comes prepped. Shelby GT500 SuperSnake hood heat extractors sold seperately.


Item No: 7S3Z-16612-SS

Our Price: $1,499.00

Shelby GT500 Super Snake HoodThis complete kit comes with the pins, plates and

cables to give your car that classic muscle car look that every Mustang owner loves. Special mounting brackets are also included.

Application: 07-11 Shelby GT500, 05-11 Ford MustangGT & V6, 06-08 Shelby GT, GT-H

GT500 Item No: 8S3Z-6316892-SS Our Price: $64.95Non-GT500 Item No: S1MS-16892-SSK Our Price: $64.95

Shelby Hood Pin Kit

Super Snake Hood Vents


Shelby Quarter Window Covers

These carbon fiber front splitters are Shelby original equipment on 2007-2009 Shelby GT500 Super Snakes and 2007 GT500 40th Edition models.


Item No: S4AM00001 Our Price: $499.89

Shelby Carbon Fiber Front Splitter 07-09

Pictured above, these carbon fiber front splitters are Shelby original equipment on 2010-2011 Shelby GT500 Super Snakes. Usage of original fasteners are required, however, you must drill your own holes for installation.


Item No: S4AM00001-10 Our Price: $559.00

Shelby Carbon Fiber Front Splitter 10-11

(702) 405-3500 27

Shelby factory original equipment on the Shelby GT500 SuperSnake, these quarter window scoops are made from injection molded urethane. Sold as a pair.


Item No: S7SB-1784-A Our Price: $209.95

Shelby Super Snake Quarter Window Scoops

These are used on the interior to complement our quarter window covers or scoops. They are sold as a pair. Includes 3M Adhesive.

Application: 05-11 Ford Mustang GT & V6, 06-11 Shelby GT500, Shelby GT, GT-H, GT500KR

Check Site for item no. Our Price: $21.95

Quarter Window Interior Trim Plates

Factory original on the 2007-2009 Shelby GT500 Super Snake, these non-functional side scoops are sold in pairs.No drilling necessary. Includes 3M adhesive tape. Comes unpainted.


Item No: 6R3Z-63424Z62-A Our Price: $239.00

Shelby Super Snake Side Scoops

Designed by Shelby Performance Parts, these hood pins are manufactured from 6061-T6 billet aluminum and then brushed before being clear anodized. Specially designed Delrin bushings secure the stainless steel lynch pins to the plates and prevent scratching and wear. Vinyl covered stainless steel lanyards keep track of the lynch pins when the hood is open. The adjustable hood pins and retaining nuts are highly polished stainless steel to catch the eye and provide years of service. Special mounting brackets are also included.

For 05-09 Mustang installation (except Shelby GT and GT-H). Permanent modifications to the hood and radiator cover panel are required. You can purchase a modified panel cover from us or modify your own with our included instructions.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang GT & V6

Item No: P5R3Z-6316892 Our Price: $94.95

Shelby Billet Hood Pin Kits

This installation kit is used with our Shelby Hood Pin Kits.

Application: 07-09 Shelby GT500, 05-09 Ford Mustang GT & V6

Item No: 7S3Z-16892-KIT Our Price: $24.95

Shelby Hood Pin Install Kit

Originally featured on the 1965 GT350R model, these plates feature simulated rivets. The Shelby quarter window covers are options on the Shelby GT500 Super Snake package. Available in black or satin with a Shelby logo stamp option. 3M mounting adhesive included.



These carbon fiber mirror covers are Shelby factory original equipment on the GT500 40th Anniversary, GT500KR, GT500 Super Snake and other models. They are made of strong, lightweight carbon fiber and complement other carbon fiber Shelby pieces, such as the front splitter and rocker panels. Right and left sides sold separately.


Item No: S4AM00002 Our Price: $99.99

These billet fuel door caps are a low profile design. Made from 6061 billet aluminum, they are either clear anodized or black e-coated for corrosion protection. Available text in “GT500” and “Shelby.” Includes stainless steel countersunk hardware. Also avalaibe in “Super Snake”, (after proof of ownership).


Item No: 66405A26 Our Price: $149.95


Shelby Carbon Fiber Mirror Covers

Shelby Billet Fuel Door

These hood vents fit the factory 07-09 Shelby GT500 hood. They were factory original equipment on the 2007 Shelby GT500 40th Anniversary models.


Item No: 7S3Z-16C630-B/COur Price: $199.89

Shelby GT500 Hood Vents

Shelby factory original on the Shelby GT500 Super Snake and Terlingua models. These wiring kits make your tail lights flash sequentially when your turn signal indicator is on. Uses a simple plug and play kit - no splicing of wiring required. Includes wiring for both left and right sides. Uses your factory original lenses.


Item No: 5R3Z-STL Our Price: $199.99

Sequential Tail Light Kit

Shelby GT Aluminum Grille: UpperShelby factory original equipment on the 06-07 Shelby GT-H “Rent-A-Racer” and the 07-08 Shelby GT. These upper grilles are made from aluminum and are available in black and polished. Includes necessary mounting hardware.Modification of original Ford grille is required. Mustang running horse emblem is not included. Requires removal of driving lights on Mustang GT models.

Application: 05-09 Ford Mustang GT & V6 and 06-08 Shelby GT, GT-H

Housing Only, Item No: S4AM00002 Our Price: $104.95Grille Only (polished), Item No: S6MB-8200-A Our Price: $114.95Complete Assembly, Item No: 8S3Z-8200-KIT Our Price: $219.95

Shelby GT Aluminum Grille: LowerFactory original on the 06-07 Shelby GT-H and optional on the 07-08 Shelby GT, this polished aluminum lower grille was designed to give your Shelby that classic 1960s look.


Item No: S6MB-8200-B Our Price: $79.95

Ford Mustang V6 Billet GrilleThis polished aluminum grille comes with both the upper and lower inserts and simply installs over the existing factory grille. The result is a dramatic enhancement to your factory grille opening that can be installed with simple hand tools. Includes upper and lower grille.

Application: 05-09 Ford Mustangs V6 except Pony Package


Made specifically for Shelby, each mask is tailor fit for each model. These masks feature ultra soft material underneath, “CS Shelby” logo embossed on nose, anti “flutter” design and 2 piece setup so you can open the hood with the mask on. These front end masks DO NOT have a provision for the front license plate. Shelby models that are factory equipped with hood pins have a provision.



Shelby Car Bra

F150 Shelby Super Snake

29(702) 405-3500


This Shelby package includes everything needed to change your grille over to the Shelby CS style.

Includes Shelby lettering and letter backing plate. Fits stock Mustang V6 or GT, GT/CS front fascia only. Requires modification of your factory grille for installation.


V6 Front Facia, Item No: CS6-009-KIT, Our Price: $226.99GT, GT/CS Front Facia, Item No: CS6-007-KIT, Our Price: $226.99

Shelby factory original on the CS6, CS8 and 06-07 Shelby GT-H “Rent-A-Racer” models. Unpainted. Hood vent is not functional. These hoods were a factory option for 07-08 Shelby GT models. Unpainted.


Item No: CS6-001 Our Price: $749.99

Designed by Shelby American, this front fascia is factory original on the CS6, CS8 and Shelby Terlingua models. Requires CS6 upper grille insert and stock V6 Mustang grille frame. Lower grille is not included. Unpainted.



Shelby CS6 Hood

Shelby CS6 Front FasciaThis lower grille cover is the perfect complement to our CS6 front fascia. Unpainted.

Application: Shelby CS6 Front Fascia


Shelby CS6 Lower Grille

These side scoops are factory original for the CS6 and CS8 Shelby Mustangs. Made from urethane, applies with double backed tape. Unpainted.



Shelby CS6 Side Scoops

This lightweight yet durable plastic rear fascia is the same one used on the Shelby CS6. It is designed for use with dual exhaust and looks fantastic in combination with the other CS6 body parts. Unpainted.


Item No: 5R3Z-17K835-BA

Our Price: $349.99

Shelby CS6 Rear Fascia

Shelby CS6 Upper Grille Insert

Direct from the Shelby Store, these Shelby windshield letter banners go toward the top of the windshield. Get rid of that empty space by letting everyone know just what type of Shelby you have! Available in GT500 (black, blue, red, white), Shelby GT500KR (black, blue, silver), 40th Anniversary (silver), Super Snake (black), Shelby GT-H (gold), Shelby GT (silver), Shelby GT/SC (silver), Shelby Performance Parts, Terlingua (black, silver, yellow), Shelby Autos (silver), Team Shelby (silver).


Item No: P1820 Our Price: $34.99

Shelby Windshield Banners

Designed for the V6 Mustang, this textured black V6 chin spoiler is manu-factured using high pressure RIM technology and urethane. The spoiler is designed to enhance the factory fascia while maintaining factory fit, finish and OE quality.Installs using the supplied self tapping screws and 3M Acrylic Bonding tape.


Item No: Z18-110022-P Our Price: $175.00

Mustang V6 Chin Spoiler

This classic Mustang GT front lower chin spoiler highlights the natural lines of the factory fascia, resulting in a stronger performance stance for your 05-09 Ford Mustang GT. This chin spoiler is molded in textured black. The light texture can also be smoothed and painted to match the color of the vehicle. Installs easily using all factory mounting locations with supplied hardware and 3M Acrylic Bonding Tape.

Application: 05-09 Ford Mustang GT with stock fascia


Ford Mustang GT Chin Spoiler

31(702) 405-3500

This ducktail spoiler is a blow molded, 3-piece designed ABS spoiler which is lightweight and requires no trunk strut adjustments. The spoiler is not painted and comes in two versions: with or without an indentation for the Mustang running horse emblem. If you choose the running horse option, the badge does come with the spoiler. Attaches with acrylic bonding tape and bolts to increase durability, which are included.

Using the ducktail spoiler eliminates the center high mounted stop lamps to meet the true vintage design goals. We also understand that some customers wish to have a 3rd brake light that does not intrude on the design efforts of the spoiler and now offer the optional LED 3rd Brake Light.


3rd Brake Light, Item No: Z18-DUCKTAILBRAKELIGHT Our Price: $47.00Spoiler Kit, Item No: Z18-CDC-DUCKTAIL Our Price: $175.00

These license plate frames are made from solid billet aluminum and are available in six (6) different Shelby designs. Please visit www.ShelbyPerformanceParts.com for more details.

Item No:13409 Our Price: $24.95

Ducktail Rear Spoiler

Designed by Shelby, this convertible top boot covers the mechanism exposed when the convertible top is down. It’s made from tough vinyl, which is simulated to look like leather and features the “Shelby” embossed race logo. Available in black, red, or white.

Application: Convertibles - 07-09 Shelby GT500, 06-09 Ford Mustang GT & V6, 07-08 Shelby GT, GT-H

Item No:Z3-13 Our Price: $379.00

Shelby Convertible Top Boot

Standard factory original Shelby equipment on the 2007 Shelby GT-H “Rent-a-Racer” and GT500 40th Anniversary models, these light bars complete the total sports car look. They also feature a built in, 3rd brake light. Not for roll over or crash protection. Includes installation kit and instructions. Features 3rd brake light.

Application: Convertibles - 07-09 Shelby GT500, 06-09 Ford Mustang GT & V6, 07-08 Shelby GT, GT-H


Shelby Light Bar with 3rd Brake Light

These trunk or deck lid liners were only installed at Shelby American on the 08-09 Shelby GT500KR. Includes 13 factory original retaining pins. Available in your choice of logo designs.


Item No: 8R3V-13B549-B2

Our Price: $79.99

Shelby Trunk Liner

Shelby Billet Aluminum License Plate Frame


This 8” antenna is machined from 6061-T6 billet aluminum and clear anodized for a great look. Looks finished with our satin or polished antenna base cover (not included).

Application : 05-09 Ford Mustang GT & V6

Item No: 5R3Z-18813-8BL Our Price: $24.95

Shorty Billet Antenna

This third brake light cover is made from stamped aluminum with a brightly polished or brushed satin finish. Includes 3M mounting adhesive.


Item No: 5S3Z-13A613-AL Our Price: $29.95

A throw back from the 1966 Shelby GT350, these rear quarter window trim pieces are made from stamped aluminum and have a brushed satin finish. Sold as a pair. Includes 3M mounting adhesive.


Item No: 5R3Z-6329796 Our Price: $69.95

Made from stamped aluminum with a brushed satin finish. Sold as a pair.


Item No: 359662-M8-SSB Our Price: $12.95

Made from stamped aluminum, these cover the black factory nozzles. Available in polished or satin finish. Not for CS6, Terlingua, GT-H or Super Snake hoods.


Item No: P5R3Z-17603 Our Price: $9.95

This cover is made from stamped aluminum with a brightly polished or brushed satin finish. Includes 3M mounting adhesive.


Item No: 5R3Z-18A927 Our Price: $10.95

Made from stamped aluminum with either brushed satin or polished finish. Sold as a pair.Includes 3M mounting adhesive.


Item No: 5R3Z-13489 Our Price: $69.95

Made from stamped aluminum with a brightly polished or brushed satin finish.

Application : 05-09 Ford Mustang GT Item No: P5R3Z-13064 Our Price: $59.95

“Shelby” stamped aluminum faux fuel cap trim ring.



This emblem replaces the factory one found on the faux gas cap. Available in the “CS” logo (as shown), Shelby GT and Shelby GT/SC. The Shelby GT & GT/SC emblems are only available to Shelby GT owners and the vehicle must be in the registry.


Item No: P7S3Z-9A031 Our Price: $19.95

This trim ring goes over the factory faux gas cap. It provides a smooth, finished look.


Item No: 5R3Z-6342528-AL Our Price: $29.95

Faux Gas Cap Trim Ring

Trunk Lock Emblem Trunk Lock Trim Ring

A set of 28 stylish washers to dress up the edges of your engine compartment. With a brushed satin finish, these really “pop” alongside our engine caps and billet strut bar.



Six (6) washers and bolts in a satin finish that are used with our Billet gasstrut hood lift kit. Requires a 5/32” allen wrench, which is not included.



Shelby 3rd Brake Light Trim

Under-Hood Hardware Set

Rear Quarter Light Trim

Washer Nozzle Covers

Antenna Base Cover

Tail Light Trim

Ford Mustang GT Grille Light Bezel

Quarter Window Trim

Hood Mounting Hardware

Made by Shelby American specifically for the 2008 Shelby GT, this Mustang running horse emblem will fit all of our billet grilles. Made from cast zinc, they are then polished, triple chrome plated and painted red, white and blue. Includes mounting brackets.


Item No: 8S3Z-8213-B Our Price: $28.95

Shelby Lettering. Templates are available on our website. Available in chrome or satin.

Application: 05-09 Ford Mustang GT & V6, 06-08 Shelby GT, GT-H

Item No: S7SB-1820-B, Our Price: $24.99

Factory original equipment on 2007-2009 Shelby Mustang GT500s, these snakes measure 4.25” tall by 2.50” wide. Sold as a pair.

Application : 07-09 Shelby GT500

Item No: M-1447-C Our Price: $74.99

These snakes measure 2.25” tall by 1.75” wide. Sold Individually. Application : 07-09 Shelby GT500

Item No: F6ZZ-16228 Our Price: $12.99

These classic Shelby letters originally appeared on the 1969 Shelby GT350/GT500 models and were revived in 2007 for the GT500. They are also Shelby factory original on the GT500 SuperSnake and GT500KR.

Application : 07-09 Shelby GT500

Item No: S7SB-1820-A Our Price: $24.99

These flag emblems will be located on the Passenger and Driver side fenders. They are laser etched Aluminum pieces. They will attach to the car with 3M adhesive that is included.


Comming Soon, check website for details

This “Powered by Ford” fender badge is similar to the ones used on the 1960s Shelby Cobra models. Adhesive backed, attaches to any flat surface.


Item No: S2MS-16228-A, Our Price: $26.95

Fender Flag Emblems

Shelby GT Grille Emblem

Shelby Trunk Lettering

GT500 Side Emblems

Cobra Side Emblems

Shelby GT500 Trunk Lettering

Powered by Ford Emblem

33(702) 405-3500

Interior Upgrades

Shelby Performance . . .Shelby Style . . .

Sitting inside a muscle car should be as exhilarating as looking at it from the outside. Unlike the legendary American cars of the 1960s, it’s possible to be both comfortable and fast with Shelby Performance Parts. From seat inserts to custom billet pieces, you can turn the interior of your car into a showpiece.

InteriorUpgrades

35(702) 405-3500

These Shelby American gauge pod sets are factory original on the 07-09 GT500 SuperSnake,Shelby Terlingua, and optional on other Shelby models. They feature Carroll Shelby signature gauges and measure 2-5/8” in diameter and feature a carbon fiber face with Carroll Shelby’s signature. The center gauge cluster design is made to attach with double sided tape, so no drillingis required. Available with no gauges, drilled or undrilled.

Supercharged packs include:Oil pressure, fuel pressure and Supercharger boost gauges.Includes fuel gauge adapter block.Oil gauge pressure adapters are sold separately. See related products below.

Non-supercharged packs include:Oil pressure, fuel pressure and oil temperate gauges.Includes fuel gauge adapter block.Oil gauge pressure adapters are sold separately. See related products below.

A. Non-Supercharged, Item No: S5SF-19017 Our Price: $594.00 B. Blank with holes drilled, Item No: CGC-HO Our Price: $144.99

C. Blank without holes drilled, Item No: CGC-WH Our Price: $129.99D. Supercharged,Item No: S5SF-19017 Our Price: $594.00

Shelby Gauge Pods A.

B. C.

D.

Specifically designed for our Shelby gauge pod setup, which can be found above. Includes oil manifold, mounting bracket, steel braided hose and necessary fittings.

Application: 4.6L non-supercharged, 4.6L supercharged, 5.4L supercharged


This custom made Shelby leather shifter boot features the same leather as the Shelby leather interior upgrade package. Single or two-tone leather. Standard or contrast stitching.



Oil Gauge Adapter

Leather Shifter Boot

This dash plaque is the same style Dash Plaque that we use on all the Shelby GT350 and 2010 Super Snake production cars. You can have this dash plaque signed by Carroll Shelby for an additional $160.00 or you can choose to have Carroll signature LASER ETCHED (as shown). 100% of the additional charge for the hand signed plaque benefits the Carroll Shelby Foundation. Application: 10-11 Shelby GT500

Laser Etched, Item No: KIT-SP-DPGT5002010 Our Price: $189.99 Hand Signed, Item No: KIT-SP-DPGT5002010 Our Price: $349.99

This dash plaque is made from 6061 billet aluminum and signed by Carroll Shelby. The package also includes a pair of GT500 door sill plates made from 6061 billet aluminum. Dash plaque attaches between the air conditioning register vents with 3M performance adhesive stripes (included). Allow 8-10 weeks for delivery. Includes certificate of authenticity and a donation to the Carroll Shelby Foundation. Application: 07-09 Shelby GT500

Item No: KIT-SP-DPGT500 Our Price: $399.99

GT500 Carroll Shelby Signed Dash Plaques


Made in the U.S., the Shelby interior upgrade packages feature a new sporty and elegant Shelby leather interior. Shelby insignias are embroidered in both front headrests and on the top of the rear seats. These are unique and color-coded to the exterior badging of your car.

To maintain the authenticity of these unique interiors, your interior will be added to your car’s registration in the Shelby Registry. This process is only available through the Shelby Store.

Application: 06-11 Shelby GT500KR, GT500 Super Snake, GT500, GT500 “427”, GT500 40th Anniversary, Shelby GT, Shelby GT-H or Shelby Terlingua.

Price Includes:• New leather trimmed interior (front and back seats)• Installation.• 3 year/35,000 mile warranty.

No Extra Cost Options:• Correct Shelby logo embroidered on seats. Registration in the Shelby registry is required.• Single or two-tone leather.

• Standard or contrast stitching.Item No: Z3-7, Our Price: $2,199.00

Made from heavy industrial vinyl with a simulated leather grain pattern. Installs in minutes by simply slipping over the existing headrest and attaches with velcro. Available in Shelby “S” Snake and Shelby Cobra Snake. Sold in pairs, Black.

Application: 05-09 Ford Mustang GT & V6

Item No: 5S3Z-63611A08-S,“S” Snake, Our Price: $79.95

Item No: 5S3Z-63611A08-T,Cobra Snake, Our Price: $79.95

Embroidered armrest available with Running Pony, Shelby Cobra Snake, and Shelby “S” Snake. This armrest/console cover is made from simulated leather with stitched seams. This is designed to be added over the existing cover.


Item No: 5M3Z-6306024-MV Our Price: $39.95

Shelby Headrest Cover Armrest CoverEmbroidered leather headrests for Shelby GT and Shelby GT500 models in charcoal black. These are NOT slip on covers. These are complete headrest units sold in pairs (driver and passenger side). Dark charcoal black, and no core exchange required.

Application: 06-09 Shelby GT500, Shelby GT

Item No: M-1447-C, Our Price: $199.99

Shelby Headrests

Shelby Upgraded Interior Package

The Shelby leather trimmed console lid cover is a perfect complement to any Shelby, especially when combined with the upgraded interior package, seen above. Available with single or two-tone leather, standard or contrast stitching.

Application: 06-09 Shelby GT-H, Shelby GT, Shelby GT/SC, GT500, GT500 40th Anniv., GT500 427 Edition, GT500 Super Snake, GT500KR, and Terlingua.


Shelby Leather Trimmed Console Lid Cover

37(702) 405-3500

Contoured to fit perfectly to the shape of the pedal Shelby in guardsman blue is embossed on each piece. For 2005-2009 Shelby and Ford Mustangs with five, six speed transmissions or automatic (Includes hardware).

Manual, Item No: 5S3Z-2457_9735-M,Our Price: $89.95

Automatic, Item No: 5S3Z-2457_9735-A,Our Price: $79.95

These Shelby dead pedals not only protect your carpeting, they give your foot the ultimate Shelby accessory. Made in the U.S. from high quality thick stainless steel, this is a perfect addition to any Shelby.

Application: 06-09 GT500, GT500 Super Snake, Shelby GT and GT-H

Item No: Z13-1,

Our Price: $39.95

Shelby Dead Pedal Covers

A quick and easy way to add some personalstyle to your interior. Available in black, chromeor satin.



Shelby leather emergency brake handle wrap. Stitch thread available in black, blue, red, silver, white, or yellow. Application: 05-11 Ford Mustang GT & V6, 07-11 Shelby GT500

05-09 Vehicles, Item No: Z3-3, Our Price: $169.00

10-11 Vehicles, Item No: Z3-3, Our Price: $299.00

Emergency Brake Handle Wrap

Shelby custom made 08-09 Shelby GT500KR door sill plates are now available through Shelby Performance Parts. These will be engraved with your GT500KR CSM number and are replacements for the stock SVT door sill plates.

Application: 08-09 Shelby GT500KR

(Must call 702-405-3500 to order) Our Price: $119.00

Shelby GT500KR Door Sill Plates

These Shelby door sill inserts are made from high-quality 6061 billet aluminum and stamped with the “Shelby” name with pebble textured finish. Includes 3M adhesive. Application: 05-09 Ford Mustang GT & V6, 07-09 Shelby GT500

Item No: 5S3Z-13208-S Our Price: $99.95

These accent strips are made of stamped aluminum and feature a brushed satin finish. Sold as a pair (12 accent pieces) and attaches with 3M adhesive (included). Application: 05-09 Ford Mustang GT & V6

Item No: 5R3Z-13208-BARS, Our Price: $29.95

Shelby Door Sill Plates Sill Plate Accent Strips

Shelby windshield sun shade. Soft reflective vinyl. For best results use foil side out.

Item No: AAM-10,

Our Price: $7.95

Shelby Pedal Covers

Shelby Windshield Sun Shade

Door Lock Knobs


Made from stamped aluminum with brushed finish.Sold in a pair. Includes adhesive to attach.


Item No: 5R3Z-14A701-AL Our Price: $7.95

These seat adjustment switch covers are made from stamped aluminum with a brushed finish. Includes adhesive.



Our billet shift boot trim is machined from quality 6061 billet aluminum and given a clear anodized finish.

Application: 05-09 Ford Mustang GT & V6, 06-09 Shelby GT500, Shelby GT and GT-H

Item No: 5R3Z-7262-BL Our Price: $69.95

Made from high-quality 6061 billet aluminum, these coat hooks are a great way to dress up your interior and install with ease. Requires original mounting hardware.



These beautiful billet aluminum end caps are for use with automatic transmissions.


Item No: P5R3Z-7C488-BL Price: $34.99

Our seat recline levers are machined from high quality 6061 billet aluminum and given a clear anodized finish. They feature the Shelby “S-Snake” logo engraved on the side. This is a complete handle and not a cover, sold as a pair.


Item No: 5S3Z-6362622-AB Our Price: $79.95

This console cup holder trim is made from 6061 billet aluminum, which is then clear anodized. It’s a perfect piece when used in conjunction with our billet shifter boot trim.



This shift boot trim is stamped from aluminum and given a clear anodized finish. For manual transmissions.



We stamped our covers from aluminum, added a brushed satin finish and blacked out the inside cup.


Item No: 5R3Z-6322050-1A Our Price: $14.95

Made from 6061-T6 aluminum, this power point plug replace the plastic piece found in the center of the dash of 2005-2009 models. Item No: 5S3Z-15052-CS Our Price: $21.95

Add some serious “pop” to your vehicle’s interior. These accents are made from stamped aluminum with a brushed satin finish. Includes 3M mounting adhesive. Sold as a pair.


Item No: 5R3Z-6351986-7A Our Price: $24.95

Machined from 6061 billet aluminum, they are designed to fit easily over the parking brake handle. Will NOT fit Shelby GT500.

Application: 05-09 Ford Mustang GT & V6 Item No: 5S3Z-2760-SL Our Price: $34.95

Shelby Power Point Plug

Shoulder Belt Accent

Lumbar Seat Switch Cover

Seat Adjust Switch Cover

Shelby Billet Shift Boot Trim

Billet Coat Hooks

Shelby Emergency Brake Handle Cover

Automatic Transmission Shifter End Caps

Seat Back Recline Levers

Shelby Billet Cup Holder TrimShelby Satin Shift Boot Trim

Satin Door Lock Knob Grommets

43(702) 405-3500

Made from stamped and brushed aluminum, this piece will compliment your Shelby or Mustang’s map light trim. Available plain or with Shelby lettering, with or without pre-drilled holes for Active Anti-Theft. Comes with 3M adhesive mounting tape.


Item No: 5R3Z-63519A70 Our Price: $24.95With Shelby Lettering, Item No: 5S3Z-63519A70 Our Price: $29.95

Shelby factory original equipment on the Shelby Terlingua. Fits in the existing power point located in the center of the dash. Turn the key to the on position then press the red start button. Includes special wire harness for easy installation.


Item No: M-11572-GT Our Price: $122.00

Made from high quality aluminum, this black retainer finishes off the look of the shifter. For Mustangs with stock shifters with a 12MM x 1.25” thread pattern.


Item No: 5R3Z-7213-BRBK Our Price: $49.99

These Shelby American white shift knobs are made from a white resin - not painted. They are then polished with a smooth clear finish for a clean feel. They feature laser etched shift patterns and logos that are paint filled to enhance the details. 12MM x 1.75” thread.


5-Speed, Item No: 7S3Z-7213-W5-75 Our Price: $44.95

6-Speed, Item No: 7S3Z-7213-W6-75 Our Price: $44.95

Our resin shift knobs are solid resin, not painted, and feature the Ford Mustang running horse. For 5-speed manual transmission. 12MM x 1.25 thread: Fits stock Mustang shifters only.

Application: 05-09 Ford Mustang GT & V6, 06-08 Shelby GT and GT-H

Item No: 5M3Z-7213-W5-25 Our Price: $44.95

Made from billet aluminum, this Shelby 5-speed shifter block knob is a direct replacement for the stock 5-speed shifter handle. Shifter boot retainer is included. M12-1.25 thread pattern.



Our resin shift knobs are solid resin, not painted, and feature the Shelby “S-Snake.” For 5-speed manual transmission. 12MM x 1.25 thread: Fits stock Mustang shifters only.

Application: 05-09 Ford Mustang GT & V6, 06-08 Shelby GT and GT-H

Item No: 5S3Z-7213-WS-25 Our Price: $46.95

Precision machined, these shift knobs are beautifully brushed and then clear anodized to enhance the interior of any Ford Mustang. The highly detailed, stamped logos are paint filled.


12MM x 1.75” is for Shelby Shifters Item No: 5M3Z-7213 Our Price: $49.99

12MM x 1.25” is for Stock Shifters Item No: 5M3Z-7213 Our Price: $49.99

3/8” x 16 is for Hurst Shifters Item No: 5M3Z-7213 Our Price: $49.99

Precision machined, these shift knobs are beautifully brushed and then clear anodized to enhance the interior of any Mustang. The highly detailed, stamped logos are paint filled.


Item No: 7S3Z-7213 Our Price: $49.99

Shelby White Shift Knob

Mustang White Shift Knob

Shifter Boot Retainer 5-Speed Block Shifter Knob

Shelby White Resin Shifter Knob

Mustang Billet Aluminum Shift Knob

Shelby Billet Aluminum Shift Knob

Shelby Center Dash Starter Button

This shift ball is made out of high quality white resin and is embossed with the 6 speed shift pattern and the iconic Super Snake stripe in black with “Shelby” on each side of the ball, designed to fit with the 07-10 6 speed shifter.

Coming Soon, Visit www.ShelbyPerformanceParts.com for details

Super Snake Shift Ball

Shelby Map Light Accent Trim


Deep pile cut with contrasting inlay stripes featuring Carroll Shelby’s signature.

Black with blue stripesBlack with orange stripesBlack with red stripesBlack with grey/silver stipesBlack with tri-color (red, white, blue) stripes.



Shelby GT floor mats - sold as a front pair.

Applications: 07-08 Shelby GT.

Item No: PFM-GT-BK Our Price: $104.95

Shelby GT500 floor mats - front pair.

Applications: 07-09 Shelby GT500.

Item No: PFM-GT500-BK,

Our Price: $104.95

Carroll Shelby Signature floor mats - front pair.

Applications: 05-09 Ford Mustang GT & V6, 06-09 Shelby GT500, Shelby GT and GT-H

Item No: PFM-2-BK Our Price: $94.95

Black rear seat floor mats, left and right sides. Not embroidered.

Application: 05-11 Ford Mustang GT & V6, 06-11 Shelby GT500, Shelby GT


Complete set of two front mats and one trunk mat with gold racing stripes along with Carroll Shelby’s signature. These mats were specifically designed for the 2006 Shelby GT-H.

Applications: 06 Shelby GT-H

Item No: Z4-FMS-GTH-40 Our Price: $229.00

Complete set of two front mats and one trunk mat with gold racing stripes along with Carroll Shelby’s signature. These mats were specifically designedfor the 2007 Shelby GT-H.

Applications: 07 Shelby GT-H

Item No: Z4-FMS-GTH-07,

Our Price: $229.00

Embroidered* 3-piece floor mat set which gives every Shelby that next step in style and design. The set includes both driver’s side (with grommet retainer loom), passenger side and trunk mat. Rear mat also available for Shaker 1000 and Shelby Kicker. *Terlingua is an inlay.

Application: 05-09 Ford Mustang GT & V6, 06-09 Shelby GT500, Shelby GT

and GT-H


Signature Floor Mats Shelby GT Floor Mats

Shelby GT500 Floor Mats

Shelby Signature Floor Mats

Rear Seat Floor Mats

2006 Shelby GT-H Floor Mats

2007 Shelby GT-H Floor Mats

Shelby Premium Floor Mats

45(702) 405-3500

Designed by Shelby and Kicker, this 4.1 channel, plug and play amplifier boosts your sound system with clear, clean and crisp notes. 46 watt x 4 with 32 bit dsp. Includes all mounting hardware and features a plug and play harness.


Item No: KA-AMP Our Price: $499.95

Greatly enhance the sound system of your Shaker system with our 10” long throw poly cone woofer. It produces twice the output of the factory units, however, is 50% smaller and 60% lighter. It’s also a great way to free up some space in your trunk.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT, GT-H, GT500KR and GT350 except convertibles

Item No: KA-10-WOOFER Our Price: $649.95

Designed by Shelby and Kicker, these 8” woofer door speakers are the perfect replacements for factory shaker 500/1000 systems. They feature a long throw, poly cone design with a 20hz to 200hz frequency response. Includes Shelby replacement grilles & mounting hardware, and is sold as a pair.

Application: 07-11 Shelby GT500, 05-11 Ford Mustang GT & V6, 06-11 Shelby GT,

GT-H, GT500KR and GT350.

Item No: KA-8-WOOFER Our Price: $149.95

Designed by Shelby and Kicker to replace the factory speakers, this pair of high performance 6x8” two way, long throw, poly cone speakers with 20mm titanium dome tweeter. The tweeter has a 12db Crossover. Freq. response is 30hz To 21khz. Sold as a pair.


Item No: KA-6X8-SPEAKER Our Price: $99.95

Designed by Kicker for Shelby American, these premium sound systems will rock your body and delight your ears! These systems are a plug-and-play design for upgrading your sound system.

Components are also available individually. For specific information on individual items see www.ShelbyPerformanceParts.com. Available for installation at Shelby American, call 702-405-3500 for more information.


Vehicles with Shaker Audio, Item No: KIC-S, Our Price: $1,399.00Vehicles with Non-Shaker Audio, Item No: KIC-NS, Our Price: $1,399.00

07-09 Package Includes: 2 Pair of 6”x8” long throw speakers.Pair of 8” woofer door speakers.10” trunk mounted subwoofer.4.1 Channel Amp

10-11 Without Navigation:2 Pair of 6”x8” long throw speakers.Pair of 8” woofer door speakers.10” trunk mounted subwoofer.4.1 channel amp.

10-11 With Navigation:2 Pair of 6”x8” long throw speakers.Pair of 8” woofer door speakers.10” trunk mounted subwoofer.

Shelby Kicker Audio Speakers Shelby Kicker Audio Woofers

Shelby Kicker 4.1 Channel Amp Shelby Kicker Audio Woofer

Shelby Kicker Premium Sound System

Suspension Systems


Stop Faster . . .Turn Harder . . .

Yes, it’s possible to build a car that is equally at home on the road or track with Shelby Performance Parts. Engineered to turn corners flat without rattling out your fillings, these systems are world-class. Harness the power of your engine and put the power to the pavement with a Shelby Performance Parts suspension piece or system.

Shelby SuspensionSystems

For the ultimate in Mustang suspension performance, Eibach has developed Multi-Pro R2 coil-overs, double adjust, specially tuned spring/damper units that allow you to extract the last ounce of cornering power from your legendary American muscle car. The coil-over design allows you to precisely tune the corner weights for optimum handling balance, and the wide range of damping adjustability lets you tune for comfort, ultimate grip or anything in between.


Item No: 35101.713 Our Price: $2,605.50

This sway bar set was specially developed by Ford Racing for the Shelby GT500 for increased handling and performance. Although not necessary, for even greater handling, this system can be used with M-18000-C dampers, M-5300-L springs and M-20201-C brace. Includes all mounting hardware.


Item No: M-5490-B Our Price: $460.00

47(702) 405-3500

Make your Ford Shelby GT500 a corner-carving side winder with the added performance of the uniquely tuned Ford Racing “FR3 Handling Pack.”

FORD’S “M-2007-FR3SVT” HANDLING PACK INCLUDES: • Adjustable Dampers M-18000-C• Lowering Springs M-5300-L• Anti-roll bar kit M-5490-B• Strut Tower Brace M-20201-C• All components are designed to work together as a package • Lowers car approximately 1.250” • Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.• A 1 year / 12,000 mile warranty is applicable when installed by an Authorized Dealer (Ford, Lincoln Mercury or Shelby Automotive) prior to the vehicle reaching either 36 months or 36,000 miles (whichever occurs first).• The warranty will cover parts and labor to replace defective components on Ford Dealer installed parts only.• Will not fit 2010 Shelby Mustang GT500.


Item No: PM-2007-FR3SVT Our Price: $1,595.00

Shelby GT500 Ford Racing “FR3” Handling Pack

Eibach Suspension Kit Multi-Pro R2

Ford Racing Shelby GT500 Sway Bar Kit

Make your V6 Ford Mustang coupe handle like the corner-carving, sidewinder with the added performance of the Ford Racing “FR3 Handling Pack.”

FORD’S “M-2007-FR3V6” HANDLING PACK INCLUDES: • Dampers (M-18000-A)• Lowering springs (M-5300-N)• Anti-roll bar kit (M-5490-C)• Strut tower brace (M-20201-F)• All components are designed to work together as a package.• Lowers car approximately 1.250”• Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.• The warranty will cover parts and labor to replace defective components on Ford Dealer installed parts only.• A 1 year / 12,000 mile warranty is applicable when installed by an Authorized Dealer (Ford, Lincoln Mercury or Shelby Automotive) prior to the vehicle reaching either 36 months or 36,000 miles (whichever occurs first).


Item No: M-2007-FR3V6 Our Price: $1,099.95

Ford Racing “FR3” Handling Pack


These high performance bolt in adjusters allow you to easily fine tune out bump steer that causes unwanted handling characteristics. These are constructed from 7075 T-6 billet aluminum adjusters with heavy duty spherical rod ends and are heat treated. Recommended for stock applications and lowered or modified suspension.


Item No: 5S3Z-3A130-SL, Our Price: $159.99

This Eibach “35115.320” Anti-Roll “sway bar” kit includes both front and rear bars and is a original factory option for 07-11 Shelby GT500 Super Snakes.

• Includes necessary brackets and bushings.• Front bar is 35mm.• Rear bar is 24mm.

* This product is backed by Eibach’s million mile warranty. All warranty claims must be processed through Eibach.


Item No:35115.320 Our Price: $356.00

For the ultimate in handling and performance, this Eibach Pro-Street S coil over kit includes both adjustable front and rear struts/shocks and jounce bumpers. These are used as a factory original option for 07-09 Shelby GT500 Super Snakes.

This stainless steel-bodied coil-over spring/damper package allows drivers the ability to quickly adjust the ride height and corner weight of each individual wheel, giving them the ultimate in flexibility for precise street and track tuning.

* 2011 applications require Caster/Camber Kit on pg. 51.

Application: 07-11 Shelby GT500 Item No: 35115.711 Our Price: $1,155.00

Shelby Eibach Pro Coil Over Kit

Step up from your panhard bar with a better way to control rear axle movement. Based on the same suspension technology the factories used in the Trans Am wars from 1968 through today and used in all professional road racing series around the globe. Uses all factory mounting points and bolts.Application: 2006 Shelby GT-H and 05-06 Mustang GT

Coupe, Item No: S7MA-5649-A Our Price: $650.00Convertible, Item No: S7MA-5649-B Our Price: $650.00

Shelby Watts Link Suspension

Shelby Eibach GT500 Front & Rear Sway Bar Kit

Compliment your sway bars with our adjustable front sway bar end links. Unlike the standard, non-adjustable link, our links allow you to accurately position your sway bar for optimum handling characteristics.


Item No: 5S3Z-5A486-S Our Price: $159.95

Shelby Sway Bar End Links Shelby Bump Steer Kit

49(702) 405-3500

As demands for higher performance grow, so does the need for more horsepower and lighter vehicle weights. Shelby American has the perfect solution to meet both of those needs. Our tubular K-member lowers the engine by 1/2”, allowing for larger supercharger to hood clearance while shaving 20 pounds off of the front end. When combined with our lower control arms, you can knock close to 30lbs off of the front end. This reduction in weight directly effects the front end, which equates to improved weight distribution. The result is better braking, cornering and handling.* Replacing K-members can often be a complicated task, however, our design can replace your stock unit in under 2-hours with hand tools.

Laser etched with the famous “CS” racing logo. Weighs 24lbs, a reduction of 20lbs from the factory unit, which weighs 44 lbs. Uses factory A-arms or our Shelby American A-arms. * Due to the nature of this assembly, you can expect additional engine noise and vibration in the vehicle’s body


Item No: Z25-S5MA-5035-A, Our Price: $499.95

Shelby Tubular K-Member

Shelby Rear Lower Control ArmsThese Shelby American high performance rear lower control arms feature the Shelby logo and are CNC machined

from solid 1.25” x 2.5” billet 6061 T6. They were designed for street and track usage to reduce bushing and control arm deflection, which is a major contributor to erratic handling and inconsistent rear end stability in Shelby Mustangs. Our

control arms also feature the correct Shelby GT500 factory offset, which prevents noise as well as bushing binding and splitting. They also include heavy duty, greaseable heavy duty fluted

polyurethane bushings. Sold as a pair.


Item No: S5MA-5538-A, Our Price: $289.95

These Shelby American caster/camber plates are designed to provide better performance and handling, especially in applications where the car has been lowered. In applications where the car has been lowered, the top of the front tires tend to lean in toward the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with our caster/camber plates. Bolts on, no drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.Caster and camber are easily adjusted at the top of the strut tower.The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars.Teflon® lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.High-tech composite thrust bearing transfers the spring load into the strut tower.All parts are either plated or powder coated for great looks and long lasting protection.Lowered vehicles as much 2.5 inches can still be aligned to factory specifications.


Item No: S5MA-18183-A Our Price: $349.00

Shelby American Caster Camber Plate

Featuring the “CS” laser cut into the arm, these Shelby American high-performance front lower a-arms are 9.6 lbs. lighter than the Shelby GT and GT500 factory units and are optimized for drag or road racing applications. Due to their optimized racing design, these control arms produce more noise than factory units. Sold as a pair.

Our arms feature spherical rod ends complemented with Delrin bushings along with a heavy duty 3/4” QA1 series teflon lined rod end on the main tube and internally greased Delrin bushing on the rear. Unlike factory GT500 lower control arms, our Shelby high performance units allow for camber and caster adjustment up to 1.125” overall narrower track width (9/16”) per side.


Item No: S5MA-3075-B Adjustable Our Price: $499.95 Item No: S5MA-3075-A, Non-Adjustable Our Price $399.95

Shelby Front Lower A-Arm


What a panhard bar does:The purpose of the panhard bar is to prevent lateral movement (side to side or backward and forward) of the rear axle. In essence, it was designed to allow for movement in a vertical plane.

How does Shelby improve on this?Factory original panhard bars are made from small diameter tubing with rubber bushings, which allow for deflection under load. This problem frequently occurs in Shelby vehicles.

Shelby American’s adjustable panhard rod is made from 1.25” DOM tubing (drawn over mandrel tubing) and finished with high performance polyurethane bushings. Our bar features left and right hand threads so that it can be adjusted while on your vehicle. The adjusters themselves are made from super strong 4130 chromoly and are complemented by 304 stainless end spacers.

If you want the ultimate in performance handling characteristics, Shelby’s panhard bars are an excellent addition.


Item No: Z25-S5MA-4264-A Our Price: $169.95

Owners drag racing their Shelbys often remove their front sway bar but leave the factory crossmember in place. For additional weight savings, Shelby is now offering a lightweight high performance crossmember that will reduce the front end weight by 11 pounds. Add that to the removal of the factory front sway bar and you’ll chop a total of 26.5 pounds off of your front end.For drag racing, off-road purposes only. Brace weighs 5.5 pounds compared to the factory weight of 16.5 pounds. Retains factory bumper cover support. Installs in under one hour.



This brace ties the front A-arms together with the K-member for additional support and reduced deflection, which translates into better handling performance. Gun metal.


Item No: Z25-S5MA-5025-B Our Price: $68.62

What a panhard bar support brace does:The panhard bar keeps the rear axle centered in the chassis. Due to higher performance demands, Ford reinforced the panhard bar with a panhard bar brace.

How does Shelby improve on this?The factory panhard bar brace is made front light-gauge stamped steel. Our high performance, reinforced brace is made from boxed tube, which reduces deflection and increases handling characteristics during cornering. Installs in less than one hour. Clears upgraded exhaust systems. Gun metal.


Item No: Z25-S5MA-4264-C Our Price: $119.86

Shelby Adjustable Panhard Bar

Shelby Sway Bar Delete Brace

Shelby Front A-Arm Sup-port Brace

Shelby Upper Panhard Bar Support Brace

Shelby American high-performance panhard components and fasteners are made from the best materials and heat processes available. They are fabricated from 35mm DOM chromoly steel that is stress relieved and heat treated after welding to give the ultimate in strength.


Item No: 5S3Z-4264-B Our Price: $74.95

Shelby American high-performance panhard components and fasteners are made from the best materials and heat processes available. They are fabricated from 35mm DOM chromoly steel that is stress relieved and heat treated after welding to give the ultimate in strength.

Our bar replaces the factory Shelby GT500 unit and utilizes self lubricating teflon/kevlar bushings rather than the stock rubber ones. This new design will allow you to re-center your rear axle for better handling characteristics with its adjustable right and left hand threads. Finished in graphite gray powdercoat.


Item No: 5S3Z-4264-BRRE Our Price: $189.95

Shelby Panhard Bar Body Brace

Shelby Panhard Bar with Race Rod Ends


This front drive shaft safety loop was designed from 1/4” x 2” plate to NHRA-legal standards. It is an essential piece and a requirement for vehicles running 12.99 or faster in the quarter mile and it attaches using existing mounting holes - no welding or drilling is required. Gun metal finish.


Shelby Front Drive Shaft Safety Loop

This panhard bar relocation bracket is designed to complement our panhard bar. Gun metal finish.



Rear Drive Shaft Tunnel Brace

Shelby Panhard Bar Reloca-tion Bracket

When you’re serious about minimizing rear axle wheel hop, Shelby has rear control arm relocation brackets to help. Our rear relocation brackets allow you to alter the vehicle’s instant center by varying the control arm angles. Remember that a vehicle’s instant center determines the ability to transfer weight properly upon acceleration.

This modification is also beneficial for road racing applications as well as vehicles that have been lowered. These brackets bolt in with provided hardware, however, we recommend that they be welded into place for drag racing applications. Gun metal finish.



This rear drive shaft tunnel brace is used in conjunction onlywith two-piece drive shafts. It’s designed from 1/4” x 2” plate to NHRA-legal standards. It’s an essential piece and arequirement for vehicles running 12.99 or faster in the quarter mile and it attaches using existing mounting holes - no welding or drilling isrequired. Gun metal finish.

Application: 07-11 Shelby GT500, 05-11 Ford MustangGT & V6, 06-11 Shelby GT, GT-H, GT500KR and GT350

Item No: Z25-S5MA-5478-B Our Price: $146.19

Shelby Anti-Wheel Hop Rear Control Arm Relocation Brackets

The factory upper control arms are made from simple stamped steel while our arms are made from 1-5/8” .120 wall DOM tube and MIG welded. This provides for maintaining optimum pinion angle, which prevents axle counter-rotation. Includes high-performance polyurethane bushings. Choose from non-adjustable (factory style) or adjustable.


Non-Adjustable, Item No: Z25-S5MA-3075-A Our Price: $139.74Adjustable, Item No: Z25-S5MA-3075-B Our Price: $189.74

Rear Upper Control Arm

The factory upper control arm bracket is a common point of deflection and failure in performance applications since the upper third link sees a majority of the load. We have eliminated that problem with our heavy duty mount, fabricated from formed chromoly sheet, tig welded and heat treated mounts. The robust design is twice the thickness of the factory original piece and features two mount locations allowing for even more suspension adjustment and less pinion angle change throughout the travel. Powder coated in a gray finish.


Item No: 5S3Z-5500-MMT, Our Price: $129.95

Shelby Rear Upper Control Arm Bracket

This brace was designed to help eliminate torque steer and body roll during hard acceleration, such as drag racing. Our high performance unit includes a competition 1.25” x .250” wall splined anti-roll bar with 1/2” rod-end links. It all connects with prothae bushings and grade-8 hardware, which bolts in using existing swaybar and frame holes. Gun metal finish.


Item No: Z25-S5MA-5025-C Our Price: $457.81

Shelby Rear Axle Body Flex Brace

53(702) 405-3500

This Ford Racing strut tower brace is factory original equipment on 05-09 Shelby Terlingua.

• Silver powder coated with etched Ford Racing Logo• Parallel beam design for added rigidity• Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.

Application: 05-09 Mustang V6

Item No: M-20201-F Our Price: $195.00

This reinforced aluminum strut bar is custom made for the 07-09 Shelby GT500 Super Snake to clear the factory Super Snake hood and supercharger. Will not fit stock Shelby GT500 hood or 10-11 models.

Units come in either polished, black ice powder coated or anodized (natural aluminum). If you wish to have your bar custom painted, choose the anodized option.

* Must verify ownership before purchasing.

Application: 07-09 Shelby GT500 Super Snake coupe and convertible

Item No: Z13-S7SB-20201-A Our Price: $262.50

The Shelby strut tower brace is made from 6061 extruded aluminum center with machine forged ends that are precision TIG welded together to be light weight and engineered to be put to the test. Will not fit Shelby GT500. Will not fit any application in conjunction with a roots-style super charger.


Item No: 5S3Z-16A052-BL Our Price: $274.95

Strut Tower Brace 4.6L Shelby Alu-minum Power Pack

This Shelby strut tower brace features a parallel boom design for added rigidity. The bar features a black powder coated finish and a stainless steel Shelby plate. Will not fit Ford Mustang V6 or Shelby GT500 models. Will not fit over superchargers. Requires new fasteners.

Application: 05-09 Mustang GT and 06-07 Shelby GT-H with plastic engine shroud cover

Item No: 5S3Z-16A052-BK Our Price: $184.95

Shelby Super Snake Engine Strut Bar

Factory original from Shelby on the 08-09 Shelby GT500KR, this brace also fits the 07-09 Shelby GT500. For optimum rigidity, it’s made from single, large diameter parallel beam design oval tube construction. It is e-coated and then black powered coated for corrosion resistance. Will not clear Whipple 3.4 supercharger. Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications. Comes complete with all necessary fasteners and instructions.



Shelby GT Strut Tower Brace

Shelby GT500 Strut Tower Brace

V6 Strut Tower Brace

Wheels & Wheel Accessories

These silver Shelby Razor wheels are used as factory original equipment on the Shelby GT500 40th Anniversary models and optional on others. Includes wheel center cap. Wheel marked “Shelby.”

Specifications: Size: 20” x 9” Offset: 24 Backside: 5.94” Bolt circle: 5x114.3


Item No: 199S-296-6 Our Price: $249.00

Shelby Razor Wheels

Shelby Wheels &Wheel Accessories

Superior Craftsmanship Superior Performance

These Shelby wheels are the same style as those used from the Shelby factory on the Shelby GT500 Super Snake, except they do not say “Super Snake.” They are the perfect complement to any vehicle. Available in chrome or black powdercoat (black powder coat adds an additional $100).Shelby Forged 20”x9” (front) 20”x10” (rear)Recommended tire size: 255/35/ZR20Engraved “Shelby Forged”.


Front, Item No: 8S3Z-1007-9 Our Price: $494.99 Rear, Item No: 8S3Z-1007-10 Our Price: $494.99

Shelby Alcoa Super Snake Wheels


55(702) 405-3500

Sold individually, these classic center caps are designed to fit Carroll Shelby Wheels. These are sold individually. You will need to order four for a complete set. Available in blue or red.

Item No: Z22-CS3 Our Price: $24.62

These wheel caps will fit in place of the factory caps. Sold in a set of four. Available with black or silver outer edge.

Item No: 1130 Starting at: $99.99

These center caps were developed exclusively for the Shelby Alcoa GT500 wheels that are used on the Shelby GT500 Super Snake. They feature the Shelby logo in the center. Sold in a set of four.

Item No: 7S3Z-1130-SHLBY Our Price: $124.95

Carroll Shelby Wheel Spinner Center Caps

Shelby Wheel Center Caps

Shelby Alcoa Wheel Center Caps

Sold individually, these classic center caps are designed to fit the Carroll Shelby Wheels. These are sold individually. You will need to order four for a complete set.Available in blue or red.

Item No: Z22-CS3 Our Price: $24.62

Shelby GT500 Center Cap Covers


Pricing:Size Anthracite Chrome Gloss Black 18.5” x 9.5” $443.00 $369.00 $329.00 20” x 9” $469.00 $369.00 $369.00 20” x 10” $493.00 $399.00 $399.00

SpecificationsSize Location Center bore Backspace Offset 18.5” x 9.5” Front/Rear 70.7mm 7.02” +45 20” x 9” Front/Rear 70.7mm 6.18” +30 20” x 10” Rear only 70.7mm 7.27” +45

Pricing:Size Chrome Black Silver 20” x 9” $469.00 $369.00 $369.00 20” x 10” $497.00 $399.00 $399.00

SpecificationsSize Location Center bore Backspace Offset Shelby Extreme Brakes 18” x 9.5” Rear only 70.7mm 7.02” +45 20” x 9” Front/Rear 70.7mm 6.18” +30 20” x 10” Rear only 70.7mm 7.27” +45 70.7mm 7.27” +45


Item No: Z22-CS56,


Item No: Z22-CS40,

Shelby CS40 Wheels

Shelby CS56 Wheels

57(702) 405-3500

Size Anthracite Chrome Gloss Black 18” x 8.5 ” $299.00 $415.00 $299.00 18” x 9.5” $329.00 $445.00 $329.00 20” x 9” $369.00 $469.00 $369.00 20” x 10” $399.00 $497.00 $399.00

SpecificationsSize Location Center bore Backspace Offset 18” x 8.5” Front/Rear 70.7mm 6.4” +35 18” x 9.5” Rear only 70.7mm 6.82” +40

20” x 9” Front/Rear 70.7mm 6.18” +30 20” x 10” Rear only 70.7mm 7.27” +45

Pricing:Size Chrome Gloss Black Hyper Black 18” x 9.5” $445.00 $329.00 $329.00 20” x 9” $469.00 $369.00 $369.00 20” x 10” $497.00 $399.00 $399.00

SpecificationsSize Location Center bore Backspace Offset18” x 9.5” Rear only 70.7mm 7.02” +45 20” x 9” Front/Rear 70.7mm 6.18” +30 20” x 10” Rear only 70.7mm 7.27” +45 70.7mm 7.27” +45


Item No: Z22-CS66,


Item No: Z22-CS69,

Shelby CS69 Wheels

Shelby CS67 Wheels

Die-Cast Collectibles

Die-Cast CollectiblesFrom breaking land speed records at Bonneville to winning the 24-hours of Le Mans, Carroll Shelby is arguably one of the most widely recognized names in racing history. After turning the racing world upside-down, he set the automotive world on fire by building some of the world’s greatest sports cars that are among the most highly sought collectibles today. Now you can own some of that performance history. From the track, to the streets, to your own personal collections comes a line of Shelby scale die-casts created with the same passion and attention to detail that made Shelby and his companies the automotive legends that they are today.


Ford Shelby GT500 2010

Shelby GT350 1966

Ford Shelby Prudhomme Super Snake

Ford Shelby GT500 Super Snake 2007-2009

The Shelby GT500 was born in the 1960s and was one of the iconic cars of an era in the automotive industry. In 2007 Shelby and Ford brought it back with new technology making it an even better car. The 2010 version is even better with new styling and performance features. This 1:24th scale die-cast of the original by

Shelby Collectibles is available in red with white stripes, black with blue stripes and blue with red stripes. Our Price: $19.99

The Shelby GT350 started out as an orphan project tucked away in whatever space was left at Shelby American Facility to use. Built for the street as well as the racing circuit. It exceeded all expectations in giving Ford’s Mustang a legendary performance image that is one of the most sought after collectibles today. Available in white

with blue stripes, red with white stripes, and blue with white stripes.

Our Price: $39.99

In 2009 Shelby American and Don “The Snake” Prudhomme came together to make the already powerful Super Snake in to the fastest Mustang to travel the quarter mile. This aggressive 800+ horsepower performer is the descendant of what the two automotive icons brought to the racing world in the 1960s. This 1:24th scale replica captures the elegant features of the real thing, including opening hood and trunk. Available in red, silver and black.

Our Price: $19.99

In 2007 Shelby American brought owners of stock Shelby GT500s the ability to take their car to the next level. With options of over 750 Horse Power these cars are some of the most powerfull to see the road. This 1:18th scale die-cast of the original 2007-2009 Shelby Super Snake is available in red, orange, silver, black, white, and blue, all with black stripes.

Our Price: $39.99

59(702) 405-3500

Shelby Cobra 427SC

Ford Shelby GT-H Rent-a-Racer

This 1:18th scale die-cast model of Carroll Shelby’s big block Shelby Cobra is available in polished with silver stripes, black with white stripes, yellow with black stripes, and red with white stripes.

$39.99

In 2005 with the release of the new vintage Mustange body style, Carroll went back to his roots, and with Ford and Hertz they recreated the American classic GT-H mustang. This is a 1:18th scale die-cast model of Carroll Shelby’s Rent-A-Racer Mustang.

$39.99

60

Daytona CoupeCarroll Shelby created the legendary Cobra in 1962 and changed the face of American automotive design forever. His Shelby Daytona coupe earned the 1965 FIA World Manufacturers Championship, a feat which no other American manufacturer has ever matched. He has worked with Ford creating the 289 Cobra, the GT350, the GT500 and the 427 S/C Cobra . Own a part of history with every die-cast.

Our Price: $39.99

Shelby GT350RIn 1965 Ford came to Carroll and asked him to take their Mustang, at the time a secretary’s car, and turn it in to a race winner. From that point on the name GT350 was synonymous with winning, and high class performance. This 1:18th scale model is a detailed replica of the original. The GT350R is available in white with blue stripes .

$49.99

CSX2000 CobraThere are few cars that start a movement or change the automotive industry. One in particular triggered a movement toward big engines, faster cars, sleeker styling, and most of all, Americans winning races. In 1962 Carroll Shelby put a Ford 289 engine in to a European style body, and the rest was history. . . This 1:24th scale die-cast of the legendary car is available in Blue.

$19.99

ShelbyPerformanceParts.com

Ford Shelby TerlinguaThe Terlingua Racing Team package for the V6 Ford Mustang takes the lighter V6 car and turns it in to a serious performer. This 1:18th scale die-cast is available in black with yellow stripes and orange with black stripes.

$44.99

Ford Shelby GTIn 2007 and 2008 Ford and Shelby came together to offer the public a quality product to improve the stock Mustang GT. Like he did in the 60s Carroll came through and produced the Shelby GT. The 1:18th scale die-casts are available in black with silver stripes (2007), blue with silver stripes (2008), blue convertible with silver stripes (2008).

$44.99

In 2007 Ford and Carroll Shelby came together to recreate a legend, the Shelby GT500 Mustang. This is a 1:18th scale die-cast of the most powerful production mustang ever created. Available in red with white stripes, white with blue stripes.

$39.99

In 2008 and 2009 Ford and Shelby produced the GT500KR “King of the Road.” This one of a kind Mustang is recreated in this 1:18th scale model. Available in blue with silver stripes, silver with blue stripes and red with silver stripes, black with black stripes, and matalic with black stripes.

$39.99

Ford Shelby GT500

Ford Shelby GT500KR

Ford Shelby 427 Edition Super SnakeDuring the 2009 Shelby 427 Nascar race, select owners were privileged enough to be able to obtain a 427 edition Shelby Super Snake and participate in first annual race event. This is a 1:18th scale die-cast repical of the original. Available in black with black stripes, red with black stripes and white with black stripes.

$39.99

61(702) 405-3500


Ford Shelby GT-H

Ford Shelby Super Snake

Ford Shelby GT

Ford Shelby Super Snake

Ford Shelby GT Ford Shelby Terlingua

Shelby Cobra Super Snake

Ford Shelby GT500KR

Daytona Coupe

Special Edition 68 GT500

Our Price: $8.99

Our Price: $8.99 Our Price: $8.99 Our Price: $8.99Our Price: $8.99 Our Price: $8.99

Our Price: $8.99 Our Price: $8.99 Our Price: $8.99Our Price: $8.99

1:64thScale Die-Cast

Go to www.ShelbyPerformanceParts.com and click on our Die-Cast section for our full line of 1:64th scale Shelby Die-Cast Collectibles.

Ford Shelby GT350 Concept

1:64th Scale Box SetShelby Museum Box Set

Ford Shelby GT500 2010

Ford Shelby Super Snake 2010Shelby Cobra Dirty RacerThis 1:18 scale model of the modern recreation of the legendary GT350 is available in white with blue stripes. Base model available soon.

Our Price: $49.99

1/64 scale 10-Piece Collector Set. Features opening doors, hood, and trunk. The best 1/64 scale for detail in the market offered as Shelby’s cars. 1 of 5,000 pieces labeled on box with a collective brass plate.

Our Price: $59.99

Shelby Museum Diorama with 7 pcs (1/64 scale) die casts to represent a few of the cars in the Shelby Las Vegas Museum.

Our Price: $49.99

This 1:18th scale diecast of the new 2010 GT500 Mustang is available in red white white stripes.

Our Price: $49.99

This 1:18 scale model of the powerful Shelby GT500 Super Snake is available in red, black and gray.

Our Price: $49.99

This 1:18th scale model of Shelby’s 427 Cobra Racer has dirt and stuff on it!!! YES,REAL DIRT!

Our Price: $49.99

63(702) 405-3500

Shelby Hats

Shelby Girl Cap

Shelby Foundation Cap

Shelby Super Snake Cap Shelby GT Striped Cap

Shelby Since 1962

Shelby GT500 Cap

Shelby GT500KR Cap

Shelby Collection Race Cap

Shelby GT500 Striped Cap

Shelby Girl hat with Carroll Shelby signature on one side, Shelby Automobiles logo on the other. This hat is embroidered and is a adjustable. Available in brown and pink.

Our Price: $24.99

The unique heart signature is featured on the front representing the Carroll Shelby Childrens Foundation . One size with an adjustable Velcro closure for custom fit. On the back of that hat in true Carroll Shelby style it says Ferrari’s Ass Is Mine. Available in black, white and blue. Our Price: $19.99

Shelby Super Snake Red Hat with Black Shelby Super Snake striping.

Our Price: $24.99

Features fabric stripes over the top and on the sides. Available in orange, white, black, and blue.

Our Price: $24.99

This is hat is a distressed look with the Shelby Earning our Stripes since 1962 logo. This also has Carroll Shelby signature embroidered across the side and the S-Snake logo on the other side. Available in red and gray. Our Price: $24.99

This hat has the GT500 logo on the front and Carroll’s signature embroidered on the side and Shelby Autos logo on the other side. This has is adjustable and is available in black & blue, black & orange, and white.

Our Price: $24.99

This hat is made exclusively for Shelby Performance Parts and for the NASCAR race. Available in ( shown left to right) white/blue, black/blue, blakc/gray, and black with flames.

Our Price: $24.99

This Shelby GT500KR hat is made exclusively for Shelby Performance Parts and is available in black with gray brim.

Our Price: $24.99

Racing hat with the Shelby logo embroidered on the front. This hat also has Carroll Shelby signature embroidered across the rim and the Shelby logo embroidered across the side. Available in red, black and gray.

Our Price: $24.99

Features fabric stripes over the top and on the sides. Available in orange, white, black, and blue.

Our Price: $24.99

Shelby Visor Hats Shelby Flat Brim Cap

ShelbyHats

Shelby American visor hats. Blue visor says Shelby American, black visor says Shelby, red visor says Shelby American.

Our Price: $19.99

Shelby flat brim fitted cap. Available in black w/blue CS logo, and black w/silver CS logo.

Coming Soon

Shelby GT350 Race Cap


ShelbyApparel

Shelby Apparel

GT350 Racing ShirtGT350 Racing Jacket

This pit shirt was made to celebrate the introduction of the 2011 Shelby GT350. This pit shirt is fully embroidered on the front, back and sleeves. This is the same style pit shirt the Shelby American crew wore during the introduction of the Shelby GT350 at the Barrett Jackson Auction. We have made this shirt available to the public.

Our Price $89.99

This jacket was made to celebrate the introduction of the 2011 Shelby GT350. It has been 45 years in the making and it is finally here. This jacket is fully embroidered on the front, back and sleeves.

Our Price: $189.99

Pit Cew Shirt W/LogosShelby Pit Crew ShirtBlack Shelby pit-crew style shirt with embroidered logos and appliqué. Our Price: $79.99

Black Shelby pit-crew style shirt with embroidered logos and appliqué. Our Price: $79.99

GT350 Team Shirt Super Snake Polo GT500 Camp Shirt Shelby GT500 PoloShelby American GT350 Pit Shirt

Our Price: $49.99Shelby Super Snake polo comes in both red and black and blue and black.

Our Price: $59.99

This button up dress shirt is embroidered with the GT500 logo and is available in black, red, or blue.

Our Price: $79.99

Shelby GT500 Polo is available in blue, red, white or black.

Our Price: $45.99

65(702) 405-3500

Shelby GT350 Hawaiian Shirt Shelby Cobra Hawaiian Shirt Shelby Camp Shirt

Shelby Skull Tee

GT350 Racing Tee

Tribal GT500 Tee

Dominance Tee

Shelby Snake Tee

Race Tee

Team Shelby Tee

40th Anniv. Tee

Shelby Tee

Shelby GT Tee

Shelby GT500 Tee

GT350 Tee

Shelby Hawaiian shirt featuring Shelbys all over this very detailed high quality shirt.

Our Price: $49.99

Cobra Shelby Hawaiian Shirt featuring Cobra Shelby all over this very detailed high quality shirt.

Our Price: $49.99

Black and white camp shirt with embroidered GT500 logo, Shelby signature and the Shelby Autos logos.

Our Price: $79.99

Shelby Autos skull black T-shirt

Our Price: $24.99

This t-shirt was made exclusively for our store and was sold at the second annual NASCAR event.

Our Price: $24.99

Shelby GT500 Blue Tribal with Cobra snake T-shirt

Our Price: $24.99

This shirt features unique artwork and the number 45 to celebrate the 45th anniversary of the 427 Cobra!

Our Price: $39.99

Weld fused 3D Shelby Snake logo on this black tee.

Our Price: $29.99

This t-shirt was made exclusively for our store and was sold at the second annual NASCAR event.

Our Price: $24.99

Official Team Shelby T-shirt featuring the Shelby Snake & Team Shelby logo.

Our Price: $19.99

Cobra snake with the 40th anniversary wings logo.

Our Price: $24.99

Shelby American white T-shirt.

Our Price: $19.99

Shelby GT black shirt with car, available in white or black.

Our Price: $24.99

This black heather style shirt has the full Shelby GT500 logo on the front. Also available in red.

Our Price: $19.99

Shelby American white tee featuring the 45th Anniversary Shelby GT350 logo.

Our Price: $24.99

1965 Shelby GT500 & GT350 Racing Team Tee

Vintage Cobra Tee

GT500 or GT350 Racing Team T-Shirt - White with blue LeMans stripes and logos on the front and back. Our Price: $19.99

On the front of this Tee is the vintage Shelby racing logo, with Cobra repeated on the back. Replica of team shirts in the 60s.

Our Price: $24.99


Shelby GT350 Red White and Blue Tee

Shelby GT350R Collage Elite Brand T-Shirt

Shelby GT500 Collage Shelby Engine Block 9” Diff

Shelby Lightning Long Sleve Dress Shirt

Shelby Extreme T-Shirt with Foil

SCCA Racing Collage T-Shirt

Shelby 427 Cobra Ghost Shirt

From our Carroll Shelby Elite clothing line, CS Shelby Snake logo on the left sleeve and racing collage on the lower half. Our Price: $57.99

From our Carroll Shelby Elite clothing line, Shelby GT500 long sleeve shirt.

Our Price: $57.99

From our Carroll Shelby Elite clothing line, Shelby engine block 9” diff long sleeve shirt.

Our Price: $24.99

From our Carroll Shelby Elite clothing line, Shelby lightning long sleeve dress shirt.

Our Price: $24.99

Shelby red and white with GT350 black short sleeve shirt designed. Our Price: $53.95

Shelby American Extreme T-shirt with foil.

Our Price: $24.99

From our Carroll Shelby Elite clothing line, CS Shelby Snake logo on the left sleeve and racing collage on the lower half. Our Price: $49.99

From our Carroll Shelby Elite clothing line, featuring a ghost image of the 427 Cobra.

Our Price: $49.99

Cobra Winged T-ShirtSuper Snake Tee

Shelby American Cobra winged design T-shirt. Available in gold and black.

Our Price: $24.99

Double sided, with the Super Snake side stripe on the front, and snake logo on the back.

Our Price: $19.99

World Headquarters TeeThis T-shirt features the “Shelby Autos” logo crackle-silk screened on the front and back on a smooth blue shirt.

Our Price: $19.99

45 Years of Shelby GT500 TeeShelby collage GT500 Shirt.

Our Price: $24.99

GT350 Team Shirt Black Screen-t-shirt

Shelby American GT350 racing pit tee.

Our Price: $49.99

Shelby black screen-printed t-shirt.

Our Price: $24.99

Class of 1962 Vintange Tee of the Shelby driving school at Riverside International Raceway in 1962.

Our Price: $39.99

Est in 1962 TeeBold Shelby Snake with crossed pistons and Est. 1962.

Our Price: $39.99

67(702) 405-3500

Fast Girls T-Shirt Womens Race HoodieShelby American fast T-shirt front and back print. Shelby American stripes on the front and “Moms don’t let there sons date fast girls like us” on the back.

Our Price: $24.99

Pink zip up hoodie created for the 2010 Shelby American race.

Our Price: $49.99

Rhinestone Top

Cobra Snake Burn Out Tee

Rhinestone Top

Burn Out Tire Tracks Tee

Tank Tee

Shelby Cobra Gold Snake Tee

Shadow Top

Shadow Top

Hooded Shirt

Collage Racer Tank Top

Shelby Extreme T-Shirt with Foil

Shelby American Snake rhinestone top. Available in brown and black.

Our Price: $19.99

Burn out design and golf foil inlay. We recommend one size larger than you would normally order.

Our Price: $24.99

Shelby American Snake rhinestone top

Our Price: $19.99

Burn out design and golf foil inlay. We recommend one size larger than you would normally order.

Our Price: $24.99

Shelby Autos skull black T-shirt

Our Price: $24.99

Shelby Cobra gold snake brown T-shirt. This shirt is cotton and sizes run normal.

Our Price: $24.99

From our Carroll Shelby Elite clothing line, imprinted with racing Cobras. Our Price: $47.99

Bold Shelby Snake with crossed pistons and Est. 1962.

Our Price: $39.99

Shelby Womens long sleeve light weight hoodie

Our Price: $29.99

From our Carroll Shelby Elite clothing line, rainbow colors printed front and back.

Our Price: $47.99

Shelby American Extreme T-shirt with foil

Our Price: $24.99

Sh

elb

yW

om

en

T350 Kids Tee Trike to Bike to 350 Flamed SuperSnake Too Much Fun Tee Kids TeeRed Shelby GT350 youth T-shirt.

Our Price: $15.99

Blue Shelby Trike to Bike to GT350 T-shirt

Our Price: $15.99

Shelby American Super Snake youth T-shirt

Our Price: $15.99

“Mama always said not to play with fire but these guys are just too fun”. Youth T-shirt

Our Price: $15.99

Shelby logo in flames and “No Drivers License Just A Dream” on back side.

Our Price: $15.99

Shelby Kids


ShelbyJackets

Shelby GT500 Jacket Shelby GT350 Team JacketLined light weight jacket that is perfect for both spring and summer nights. This has embroidered Shelby GT500 logo on the front of the jacket and the full embroidered logo on the back of the Jacket. Comes in four different colors, blue, black, red, gray and orange.

Our Price: $109.99

This Shelby American NASCAR race jacket was made for the official NASCAR race in Las Vegas called the Shelby American celebrating the 45th anniversay of the GT350. This jacket is made of twill.

Our Price: $199.99

Shelby Since 1962 Blue Hoodie Pullover

Womans Shelby Super Snake Pink Hoodie

Shelby Cobra Tie

This Shelby Since 1962 hoodies is Blue with Mesh white stripes over the arms. This will have minimal shrinkage and has a full athletic cut.

Our Price: $59.99

This zip hoodie is made of 80% cotton and 20% polyester. It has the Shelby Super Snake logo down one sleeve.

Our Price: $49.99

Item No: TIE01 Our Price: $24.99

Pit Cew Jacket W/LogosShelby Pit Crew JacketBlack Shelby pit-crew style jacket with embroidered logos and appliqué.

Our Price: $149.99

Black Shelby pit-crew style jacket with embroidered logos and appliqué.

Our Price: $149.99

Shelby GT500 Hoodie Shelby Super Snake Hoodie

Custom Shelby Letterman Jackets

Shelby GT500 hoodie with logos on both the front and back. A large Shelby GT500 logo as shown in the photo is on the back.

Our Price: $49.99

This zip hoodie is made of 80% cotton and 20% polyester. It has Shelby down one sleeve and Super Snake up the other sleeve.

Our Price: $49.99

These Shelby letterman jackets are custom made to your taste. Offering a plethora of logos, and style to match your specific car or your specific want. From the Shelby GT to the Shelby Super Snake we can make a jacket that’s perfect for you. See Website for Details.

69(702) 405-3500

Shelby Collectibles

Shelby GT500 Banner 2007

Ford Shelby GT 2007 Ford Shelby GT-H 2006

Shelby GT500 Banner 2009

1965 Cobra, BlueFord Shelby GT350H with GT-H

Vintage Shelby Girl Poster Reproduction

See our complete line of posters at ShelbyPerformanceParts.com

Ford Shelby GT500KR 2008

Shelby Super Snake Banners4ft x 2ft available in red/white, black/white, white/blue, and orange/white.

Our Price: $59.99

4ft x 2ft Indoor/outdoor banner of the 2007 Ford Shelby GT mustangs

Our Price: $59.99

4ft x 2ft banner of the 2006 Ford Shelby GT-H Hertz Rent- a-Racer Mustang.

Our Price: $59.99

4ft x 2ft available in red/white, black/red, black/white, blue/white, white/blue and orange/white.

Our Price: $59.99

4ft x 2ft high quality banner of Shelby’s 427 big block Cobra.

Our Price: $59.99

4ft x 2ft banner for the 2006 Shelby GT-H Hertz rental car, next to its predecessor, the Shelby GT350H. Our Price: $59.99

1967 Shelby Girl poster reproduction 24X36 matte finish.

Our Price: $19.99

4ft x 2ft banner of the 2008 Ford Shelby GT500KR “King of The Road”

Our Price: $59.99

4ft x 2ft available in Red/Black, Black/Gray, Blue/Black, White/Black and Gray/Black

Our Price: $59.99

Banners & Posters

Go to www.ShelbyPerformanceParts.com and click on our banners, signs and posters section for our full line of metal signs, posters, banners, flags and everything else to Shelbyize your space.

Vintage Posters& Prints


Cobra Wall ClockCobra Neon Clock

Remembering the Shelby Years

Shelby Cars in Detail World Registry of Cobras & GT40s

The Ford Shelby GT500: Misprinted

GT500 Neon ClockShelby Neon Clock11 3/4” DiameterQuartz movementOne-year warranty

Our Price: $59.99

14 3/4” diameter caseQuartz movement1-year limited warranty

Our Price: $24.99

Signed by Carroll Shelby, this 322 page, hard-cover book captures the imagination of motoring enthusiasts, racers and the general public as has the Shelby American Cobra.

Our Price: $165.99

‘Shelby Cars in Detail: Cars of the Shelby American Collection’ by Frank Barrett, Photos by Boyd Jaynes, Foreword by Carroll Shelby. Available for Carroll Shelby’s autograph.

Our Price: $149.99

2008 Shelby World Registry - 4th Edition, Vol. 1: Cobras and GT40s.Hardcover, 1618 pages, 2848 b&w photos, color dust jacket.

Our Price: $239.99

This book is a hard cover book with 88 full 8 1/2 X 11 full color glossy pages all about the history of the Shelby GT500. For more information please visit our website.

Our Price: $24.99

This neon clock is made with a 17” diameter chrome plated shell with a glass face. The clock mechanism runs on AA Batteries (not included). Blue and white neon illuminates this snake!

Our Price: $180.00

This 17” chrome plated neon Shelby clock illuminates in Shelby blue and white.

Our Price: $180.99

Sh

elb

yC

olle

ctib

les

Shelby Gas Cap Sign

Shelby Winged Snake Metal SignsShelby Racing Event Signs

Shelby GT350 SignShelby GT500 gas cap sign. Laser cut from metal and is available in 16” and 29” tall.

16” Sign: Our Price: $35.0029” Sign: Our Price: $70.00

These metal signs are laser cut and available in 16” or 29” tall. Available in Shelby GT500, Shelby GT500 Super Snake, and Shelby GT500KR.


These metal sings were created to celebrate the Shelby NASCAR races in Las Vegas. They are laser cut and available in 16” or 29” tall, and in three different styles.

Starting at: $35.00

Shelby GT350 sign. Laser cut from metal and is available in 16” and 29” tall.


For your garage, your office, or your Shelby collection, show off your Shelby pride with these Shelby Parking Only tin signs. Available in Shelby GT500, Shelby GT, Shelby Super Snake, Shelby GT500 KR, and Shelby Snake Logo. Our Price: $19.95

Shelby Parking Signs

71(702) 405-3500

Silver Retro Buckle

Shelby Hinged Money Clip

Retro Star buckle

Shelby Pocket Watch

Barbed Wire Retro Buckle

Shelby Silver Bracelet

Shelby Oval Barbed Wire Retro Buckle the barbed wire and outside is outlined with a blue color

Item No: 6135-SHELBY1F, Our Price $112.99

Item No: BC61388-SHELBY1F, Our Price $61.99

Shelby Rectangle Retro Star buckle

Item No:15520RTS-SHELBY1F, Our Price $112.99

Item No:WATCHP20-SHELBY1F, Our Price $112.00

Shelby Oval Silver Retro Buckle

Item No: 1350RTS-SHELBY1F, Our Price $61.99

Item No: MCL23-SHELBY1F, Our Price $61.99

Cobra Earrings

Gold Snake Earrings Snake Pendant

Silver plated pin earings.

An exclusive item from the Carroll Shelby collection. These earrings are gold plated.

14K white gold with 0.06 ctw white Pave diamonds and 0.21 ctw round red diamonds.

This is a charm that can be attached to your necklace.

$14.99

$14.99

$9.99

These items are a combination of traditional western designs combined with Shelby logos and a unique modern flair. Crisply executed engraving styles unmatched in their brilliance.

For our full line of Cleo Shelby Jewelry please visit the Jewelry portion of our website.


This Shelby American genuine leather portfolio fits an 8 1/2” x 11” writing pad and includes slots for your credit card, a spacious pocket and a pen holder. The front features the Shelby American logo. This portfolio comes with one pad of paper.

Item No: PORT101, Our Price: $39.99

Deluxe 300 Piece kit these quality clay poker chips feature classic and current Shelby vehicles, 5 dice and 2 Shelby collectible card decks.

This is one of a kind kit is perfect for the Shelby lover who also loves to play poker. These ceramic chips are high quality and are sure to impress all your friends at your next poker game.

Our Price: $49.99

Shelby Leather Portfolio

Shelby Poker SetThis Shelby racing helmet coffee maker makes 10 cups of coffee and has a keep-warm and anti-drip feature. The perfect Shelby piece for any enthusiast’s kitchen or office.

Our Price: $99.99

Since 2007, The annual Shelby magazine has been flying off shelves around the world. All are approximately 150+ pages, and are a must for any Shelby fans collection. Some quanti-ties are limited.

Starting at: $9.99

Racing Helmet Coffee Maker

Shelby Annual Magazines

From the indisputable leader in car audio and SHELBY comes its loudest and most innovative stereo system available for your iPod® digital media player: the KICKER iK500. For nearly 30 years, KICKER® has set the standard as the dominant car audio brand by producing high-performance equipment that guarantees unbeatable sound quality and hard-hitting bass. Now, KICKER busts out of the car and into the home with the KICKER iK500 Stereo System for iPod. Designed to be the loudest MP3 docking stations on the market, the “iKICK” lets you get more out of your MP3 player than ever before. Bass and treble adjustments allow you to enjoy your music the way you want. The big five-inch woofers, 19mm tweeters and 40-watt stereo amplifiers deliver the kind of crisp, powerful sound you expect from a KICKER product. KICKER’s patent-pending six-inch square reflex subwoofer delivers a dynamic bass response unmatched by other MP3 docking stations.

Item No: IKICK, Our Price: $649.95

Shelby Kicker I-Pod Sound System

Shelby/Ford Cobra Men’s Metal Band Calendar Watch

These are sure to become collectors items. Three year limited warranty. Our Price: $71.99

Shelby/Ford Cobra Snake Ladies’ Calendar Watch

This is an official licensed product. These are sure to become collectors items. Three year limited warranty.

Our Price: $54.99

73(702) 405-3500

Sh

elb

yG

las

s W

are

A B C D

HI

J

G

FE

A. Shelby Pewter Beer Stein Our Price: $19.99B. Mini Beer Stein Shot Glass Our Price: $9.99C. Shelby Blue Shot Glass Our Price: $6.99D. Shelby Autos Chrome Style Shot Glass Our Price: $6.99E. Shelby American Logo Glass Our Price: $7.99F. Shelby Tumbler Glass Our Price: $12.99G. Shelby GT500 Mug Our Price: $9.99 (Also available in red)H. Shelby Girl Shot Glass Our Price: $10.99I. Shelby GT500 Super Snake Coffee Mug Our Price: $18.99 (Also available in GT500 and Terlingua)J. Shelby GT500 Beer Mug Stein Our Price: $12.99 (Also available in Shelby GT)

K. 427 Race Decal 5” Our Price: $8.99 (3” also available)

L. Shelby GT Decal 5” Our Price: $9.99 (3” also available)

M. Shelby GT-H Decal 5” Our Price: $9.99N. Shelby GT500 Decal 5” Our Price: $8.99 (3” also available)

O. Shelby GT500KR Decal 5” Our Price: $8.99P. Shelby GT500 Super Snake 5” Our Price: $8.99

For our full line of glassware and Shelby American decals please visit us at www.ShelbyPerformanceParts.com.

Q. Shelby Wing Keychains (GT500KR, Super Snake or GT500) Our Price: $6.99R. Shelby GT 500 Hood Keychain Our Price: $6.99S. Shelby GT350 45th Anniversary Keychain Our Price: $6.99T. Shelby GT Keychain Our Price: $6.99U. Shelby Terlingua Shield Keychain Our Price: $6.99V. Carroll Shelby Bobble Head Pin Our Price: $7.99W. Shelby American GT350 Wings Keychain Our Price: $6.99X. Shelby GT or GT500 Dash Plaque Keychain Our Price: $6.99

Many of these keychains are also available as pins. For our full line of keychains and pins please visit us at www.ShelbyPerformanceParts.com.

Keychains & Shelby

Collector PinsDecals

Q Q

Q

K

NL M

PO

R

ST U

Vx

W


FAQReturn Questions Our goal at Shelby Performance Parts is to provide you with high quality items. However, if you are not satisfied with your purchase, received the wrong item, ordered the wrong color, size, etc., we're here to help resolve the problem. In order for us to serve you, please contact us immediately or within 30 days. 1. Prior to returning any item, the ShelbyStore.com must be contacted via e-mail at [email protected] or by calling 702.942.1720 to obtain an RMA number. All orders returned without an RMA number will NOT be accepted. 2. Items MUST be returned in new condition and in original packaging. 3. If possible, please include a copy of your invoice inside your returned package. You can print copies of your invoice by logging in at www.ShelbyPerformanceParts.com and clicking on the "My Account" link.4. Damaged boxes must be returned unopened.

Our Return Address Team Shelby - Shelby Store 6755 Speedway Blvd. Las Vegas, Nevada - 89115

Frequently Asked Questions

Has my order shipped?Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to check your order status.

How do I change quantities or cancel an item in my order?Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to view orders you have placed. Then click the "Change quantities / cancel orders" link to find and edit your order. Please note that once an order has begun processing or has shipped, the order is no longer editable.

How do I track my order?Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to track your order.

My order never arrived.Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to track your order status. Be sure that all of the items in your order have shipped already. If you order displays your Package Tracking Numbers, check with the shipper to confirm that your packages were delivered. If your packages each show a status of "delivered" please contact customer service for assistance.

An item is missing from my shipment.Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to track your order status. Be sure that all of the items in your order have shipped already. If you order displays your Package Tracking Numbers, check with the shipper to confirm that your packages were delivered. If your packages each show a status of "delivered" please contact customer service for assistance.

My product is missing parts.Go online to www.ShelbyPerformanceParts.com and click the "My Account / Order Status" link to track your order status. Be sure that all of the items in your order have shipped already. If you order displays your Package Tracking Numbers, check with the shipper to confirm that your packages were delivered. If your packages each show a status of "delivered" please contact customer service for assistance.

When will my backorder arrive?Backordered items are those which our suppliers are unable to predict when they will have more in stock, but as soon as they do we will be able to ship the item to you.

Do I have to pay sales tax?You only have to pay sales tax if you are located in the same state as our warehouse.

I have a question on my charges.Click the "My Account / Order Status" link on our website to review your orders. You may compare your order history on our website with your financial records. If you have further questions or concerns, please contact customer service for further assistance.

I need a copy of my receipt/invoice. Click the "My Account / Order Status" link on our website to print invoices.

When will my credit appear on my account?Credits usually take 7-10 business days from the time we receive your item(s).

When will my credit card be charged?Your credit card will be charged within 24 hours prior to shipment of your item(s).

How do I buy/redeem a gift certificate?To purchase a gift certificate go online to www.ShelbyPerformanceParts.com. If you are the recipient of a gift certificate and would like to redeem your gift certificate let a sales associate know when ordering over the phone, or if ordering online, type the certificate code in during check out.

How do I use a coupon?If ordering online, after adding items to your cart, click the "View Cart" link at the top of this site to view your cart. At the bottom of the shopping cart you'll see a box where you may enter your coupon code. If ordering over the phone, let a sales associate know you have the coupon code to receive the discount.

75(702) 405-3500

Terms and ConditionsAll users of this catalog agree that use of this catalog is subject to the following terms and conditions and other applicable law. If you do not agree to these terms and conditions, please do not use this catalog. Copyright The entire content included in this catalog, including but not limited to text and graphics is copyrighted as a collective work under the United States and other copyright laws, and is the property of Shelby Performance Parts. The collective work includes works that are licensed to Shelby Performance Parts. Copyright 2003, Shelby Performance Parts ALL RIGHTS RESERVED. Permission is granted to electronically copy and print hard copy portions of this catalog for the sole purpose of placing an order with Shelby Performance Parts or purchasing Shelby Performance Parts products. You may display and, subject to any expressly stated restrictions or limitations relating to specific material, download or print portions of the material from the different areas of the catalog solely for your own non-commercial use, or to place an order with Shelby Performance Parts or to purchase Shelby Performance Parts products. Any other use, including but not limited to the reproduction, distribution, display or transmission of the content of this catalog is strictly prohibited, unless authorized by Shelby Performance Parts. You further agree not to change or delete any proprietary notices from materials downloaded from the catalog. Trademarks All trademarks, service marks and trade names of Shelby Performance Parts used in the catalog are trademarks or registered trademarks of Shelby Performance Parts Warranty Disclaimer This catalog and the materials and products on this catalog are provided “as is” and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, Shelby Performance Parts disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose and non-infringement. Shelby Performance Parts does not represent or warrant that the functions contained in the catalog will be uninterrupted or error-free, that the defects will be corrected, or that this catalog or the server that makes the catalog available are free of viruses or other harmful components. Shelby Performance Parts does not make any warrantees or representations regarding the use of the materials in this catalog in terms of their correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. Some states do not permit limitations or exclusions on warranties, so the above limitations may not apply to you. Limitation of Liability Shelby Performance Parts shall not be liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this catalog or the performance of the products, even if Shelby Performance Parts has been advised of the possibility of such damages. Applicable law may not allow the limitation of exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you. Typographical Errors In the event that a Shelby Performance Parts product is mistakenly listed at an incorrect price, Shelby Performance Parts reserves the right to refuse or cancel any orders placed for product listed at the incorrect price. Shelby Performance Parts reserves the right to refuse or cancel any such orders whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is cancelled, Shelby Performance Parts shall issue a credit to your credit card account in the amount of the incorrect price. Term; Termination These terms and conditions are applicable to you upon your accessing the catalog and/or completing the registration or shopping process. These terms and condi-tions, or any part of them, may be terminated by Shelby Performance Parts without notice at any time, for any reason. The provisions relating to Copyrights, Trademark, Disclaimer, Limitation of Liability, Indemnification and Miscellaneous, shall survive any termination. Notice Shelby Performance Parts may deliver notice to you by means of e-mail, a general notice on the catalog, or by other reliable method to the address you have provided to Shelby Performance Parts. Miscellaneous Your use of this catalog shall be governed in all respects by the laws of the state of California, U.S.A., without regard to choice of law provisions, and not by the 1980 U.N. Convention on contracts for the international sale of goods. You agree that jurisdiction over and venue in any legal proceeding directly or indirectly arising out of or relating to this catalog (including but not limited to the purchase of Shelby Performance Parts products) shall be in the state or federal courts located in Los Angeles County, California. Any cause of action or claim you may have with respect to the catalog (including but not limited to the purchase of Shelby Performance Parts products) must be commenced within one (1) year after the claim or cause of action arises. Shelby Performance Parts’s failure to insist upon or enforce strict performance of any provision of these terms and conditions shall not be construed as a waiver of any provision or right. Neither the course of conduct between the parties nor trade practice shall act to modify any of these terms and conditions. Shelby Performance Parts may assign its rights and duties under this Agreement to any party at any time without notice to you. Use of Catalog Harassment in any manner or form on the catalog, including via e-mail, chat, or by use of obscene or abusive language, is strictly forbidden. Impersonation of others, including a Shelby Performance Parts or other licensed employee, host, or representative, as well as other members or visitors on the catalog is prohibited. You may not upload to, distribute, or otherwise publish through the catalog any content which is libelous, defamatory, obscene, threatening, invasive of privacy or publicity rights, abusive, illegal, or otherwise objectionable which may constitute or encourage a criminal offense, violate the rights of any party or which may otherwise give rise to liability or violate any law. You may not upload commercial content on the catalog or use the catalog to solicit others to join or become members of any other commercial online service or other organization. Participation Disclaimer Shelby Performance Parts does not and cannot review all communications and materials posted to or created by users accessing the catalog, and is not in any manner responsible for the content of these communications and materials. You acknowledge that by providing you with the ability to view and distribute user-generated content on the catalog, Shelby Performance Parts is merely acting as a passive conduit for such distribution and is not undertaking any obligation or liability relating to any contents or activities on the catalog. However, Shelby Performance Parts reserves the right to block or remove communications or materials that it determines to be (a) abusive, defamatory, or obscene, (b) fraudulent, deceptive, or misleading, (c) in violation of a copyright, trademark or; other intellectual property right of another or (d) offensive or otherwise unacceptable to Shelby Performance Parts in its sole discretion. Indemnification You agree to indemnify, defend, and hold harmless Shelby Performance Parts, its officers, directors, employees, agents, licensors and suppliers (collectively the “Service Providers”) from and against all losses, expenses, damages and costs, including reasonable attorneys’ fees, resulting from any violation of these terms and conditions or any activity related to your account (including negligent or wrongful conduct) by you or any other person accessing the catalog using your Internet account.

ShelbyPerformanceParts.com76 ShelbyPerformanceParts.com

(702) 405-3500 77


Index

0-9Shelby GT500 Floor Mats 44 Shelby Rear Upper Control Arm Bracket 52 2006 Shelby GT-H Floor Mats 44 2007 Shelby GT-H Floor Mats 44 4.6L Ford Racing Power Pack 16 5-Speed Block Shifter Knob 43

AAntenna Base Cover 32 Armrest Cover 36Automatic Transmission Shifter End Caps 42

BBillet Coat Hooks 42Billet Strut Tower Caps 18

CCarroll Shelby Wheel Spinner Center Caps 55 Cobra Side Emblems 33

DDoor Lock Knobs 37Ducktail Rear Spoiler 31

EEibach Suspension Kit Multi-Pro R2 47 Emergency Brake Handle Wrap 37 Eradispeed+2 Brake Rear Set 9

FF150 Shelby Super Snake 29 Faux Gas Cap Trim Ring 32 Fender Flag Emblems 33 Ford Mustang GT Chin Spoiler 30 Ford Mustang GT Grille Light Bezel 32 Ford Mustang V6 Billet Grille 28 Ford Racing “FR3” Handling Pack 47 Ford Racing Shelby GT500 Sway Bar Kit 47 Ford Racing Whipple Superchargers 12

GGT500 Carroll Shelby Signed Dash Plaques 35 GT500 Side Emblems 33

HHood Mounting Hardware 32

KKenne Bell Superchargers 11

LLeather Shifter Boot 35 Lower Grille With Shelby GT500 Brake Ducts 9 Lumbar Seat Switch Cover 42

MMagnaflow Comptetition Series Cat-Back System 23 Magnaflow Magnapack Series Cat-Back System 23 Magnaflow Performance Series Cat-Back System 23 Magnaflow Street Series Cat-Back System 23 MRT AeroTurbine Axle-Back Exhaust 23 MRT MaxFlow H-Pipe, with Cats 22 MRT MaxThunder Axle-Back Exhaust 22 MRT MaxThunder Axle-Back Exhaust 23 Mustang Billet Aluminum Shift Knob 43

Mustang V6 Chin Spoiler 30 Mustang White Shift Knob 43

OO2 Sensor Extension Harness 21 Oil Gauge Adapter 35

PPowered by Ford Emblem 33

QQuarter Window Interior Trim Plates 27 Quarter Window Trim 32

RRadiator Cover Panels 17 Rear Control Arm 52 Rear Drive Shaft Tunnel Brace 52 Rear Quarter Light Trim 32 Rear Seat Floor Mats 44 Rear Upper Control Arm 52 Relocation Brackets 52

SSatin Door Lock Knob Grommets 42 Seat Adjust Switch Cover 42 Seat Back Recline Levers 42 Sequential Tail Light Kit 28 Shelby 3rd Brake Light Trim 32 Shelby 4.6L High Performance Fuel Rail Kit 14 Shelby 8.8” Axle Cover 17 Shelby 8-Quart Oil Pan 18 Shelby Adjustable Panhard Bar 50 Shelby Alcoa Super Snake Wheels 54 Shelby Alcoa Wheel Center Caps 55 Shelby Aluminum Drive Shaft 17 Shelby American Caster Camber Plate 49 Shelby Anti-Wheel Hop 52 Shelby Battery Hold Down Brackets 18 Shelby Billet Aluminum Shift Knob 43 Shelby Billet Cup Holder Trim 42 Shelby Billet Engine Cap Sets 19 Shelby Billet Fuel Door 28 Shelby Billet Hood Pin Kits 27 Shelby Billet Shift Boot Trim 42 Shelby Borla Cat-Back & “X” pipe 20 Shelby Brake Caliper Covers 9 Shelby Bump Steer Kit 48 Shelby Car Bra 28Shelby Carbon Fiber Front Splitter 07-09 27 Shelby Carbon Fiber Front Splitter 10-11 27 Shelby Carbon Fiber Mirror Covers 28 Shelby Center Dash Starter Button 43 Shelby Convertible Top Boot 31 Shelby CS40 Wheels 56 Shelby CS56 Wheels 56 Shelby CS6 Front Fascia 30 Shelby CS6 Hood 30Shelby CS6 Lower Grille 30 Shelby CS6 Rear Fascia 30 Shelby CS6 Side Scoops 30 Shelby CS6 Upper Grille Insert 30

79(702) 405-3500

Index

Shelby CS67 Wheels 57 Shelby CS69 Wheels 57 Shelby Dead Pedal Covers 37 Shelby Eibach GT500 Front & Rear Sway Bar Kit 48 Shelby Eibach Pro Coil Over Kit 48 Shelby Emergency Brake Handle Cover 42 Shelby Exhaust Tip Covers 21 Shelby Extreme Brake Pads 8 Shelby Extreme Brakes 7 Shelby Extreme Duty Coolant Tanks 15 Shelby Extreme Duty Heat Exchanger 15 Shelby Extreme Duty Radiator 15 Shelby Five & Six Speed Shifter 16 Shelby Front A-Arm Support Brace 50 Shelby Front Drive Shaft Safety Loop 52 Shelby Front Lower A-Arm 49 Shelby Gauge Pods 35 Shelby GT Aluminum Grille: Lower 28 Shelby GT Aluminum Grille: Upper 28 Shelby GT Floor Mats 44 Shelby GT Grille Emblem 33 Shelby GT Strut Tower Brace 53 Shelby GT500 Auxiliary Idler Kit 11 Shelby GT500 Borla Multicore Exhaust Mufflers 22 Shelby GT500 Borla Touring Exhaust 20 Shelby GT500 Borla Touring Exhaust Mufflers 22 Shelby GT500 Borla Touring Exhaust System 21 Shelby GT500 Borla XR1 Exhaust System 22 Shelby GT500 Borla XR1 Long Tube Headers 21 Shelby GT500 Brake Duct Bezel 9 Shelby GT500 Center Cap Covers 55 Shelby GT500 Coil Covers 14 Shelby GT500 Crankshaft Damper 17 Shelby GT500 Engine Cap Set 19 Shelby GT500 Engine Cap Set 19 Shelby GT500 Ford Racing “FR3” Handling Pack 47 Shelby GT500 Fuel Rail Kit 14 Shelby GT500 Hood Vents 28 Shelby GT500 Kooks Headers 21 Shelby GT500 Kooks Long Tube Header System 21 Shelby GT500 Short Throw Shifter 16 Shelby GT500 Strut Tower Brace 53 Shelby GT500 Super Snake Hood 26 Shelby GT500 Trunk Lettering 33 Shelby GT500 Valve Coil Cover 19 Shelby GT500KR Door Sill Plates 37 Shelby Headrest Cover 36 Shelby Headrests 36Shelby Hood Pin Install Kit 27 Shelby Hood Pin Kit 26 Shelby Hood Prop Rod 17 Shelby Kicker 4.1 Channel Amp 45 Shelby Kicker Audio Speakers 45 Shelby Kicker Audio Woofer 45 Shelby Kicker Audio Woofers 45 Shelby Kicker Premium Sound System 45 Shelby Leather Trimmed Console Lid Cover 36

Shelby License Plate Frame 31 Shelby Light Bar with 3rd Brake Light 31 Shelby Map Light Accent Trim 43 Shelby Muffler Delete System 22 Shelby Panhard Bar Body Brace 50 Shelby Panhard Bar Relocation Bracket 52 Shelby Panhard Bar with Race Rod Ends 50 Shelby Pedal Covers 37 Shelby Plus Brake System 8 Shelby Plus Pro Brake System Rear 8 Shelby Plus Pro Front Brake System 9 Shelby Power Point Plug 42 Shelby Premium Floor Mats 44 Shelby Quarter Window Covers 27 Shelby Razor Wheels 54 Shelby Rear Axle Body Flex Brace 52 Shelby Rear Lower Control Arms 49 Shelby Redline Hood & Trunk Quicklift Kits 18 Shelby Satin Shift Boot Trim 42 Shelby Signature Floor Mats 44 Shelby Six Speed Shifter Lever 16 Shelby Super Snake Engine Strut Bar 53 Shelby Super Snake Side Scoops 27 Shelby Sway Bar Delete Brace 50 Shelby Sway Bar End Links 48 Shelby Tensioner Support Plate 17 Shelby Terlingua Side Exhaust Heat Shield 22 Shelby Terlingua Side Exit Cat-Back Exhaust 22 Shelby Trunk Lettering 33 Shelby Trunk Liner 31 Shelby Tubular K-Member 49 Shelby Turbo Mufflers 21 Shelby Upgraded Interior Package 36 Shelby Upper Panhard Bar Support Brace 50 Shelby Valve Covers 14 Shelby Watts Link Suspension 48 Shelby Wheel Center Caps 55 Shelby White Resin Shifter Knob 43 Shelby White Shift Knob 43 Shelby Windshield Banners 30 Shelby Windshield Sun Shade 37 Shifter Boot Retainer 43 Shorty Billet Antenna 32 Shoulder Belt Accent 42 Signature Floor Mats 44 Strut Tower Brace Aluminum Power Pack 53 Super Snake Hood Vents 26 Super Snake Quarter Window Scoops 27 Super Snake Shift Ball 43

TTail Light Trim 32Trunk Lock Emblem 32 Trunk Lock Trim Ring 32

U-V-WUnder-Hood Hardware Set 32 V6 Strut Tower Brace 53 Washer Nozzle Covers 32

81(702) 405-3500

Date post:	26-Nov-2014
Category:	Documents
Upload:	lucas-davi
View:	77 times
Download:	13 times

2010-2011

Documents