2010 Catalogue - Telkom International · 2018. 9. 5. · 2010 Catalogue p.4 p.7 p.4 p.18 p.22 p.25...

2010 Catalogue

DeliveryOrders received before 4.30pm for stock items will be despatched the same day for next day delivery between 8.00am – 6pm to all UK mainland destinations.

Time deliveries before 9.00am, 10.30am and 12 noon are available to UK mainland addresses at cost.

Saturday deliveries or Saturday before 9.00am, 10.30am or before 12 noon are also available to UK mainland addresses.

Same Day Delivery Service can be provided.

We provide a next day or 2 – 3 day service to Northern Ireland, Eire and Channel Islands.

For our overseas customer carriage arrangements are made on request.

Alternately, our customers can collect their orders from our warehouse Monday to Friday between 7.30am – 5pm.

Ordering InformationWe pride ourselves on our ability to assist our customers to identify the exact items they require. We will never ask you for our part number or give you any complicated questions.

You can place your orders by phone, fax or email.

Tel: (00) 1793 848 123 Fax: (00) 1793 853 953 E-mail: [email protected]

Telkom International LimitedUnit 12A, Templars Way Industrial EstateMarlborough RoadWootton BassettSwindonWiltshireSN4 7SAUK

General InformationWarrantyWe offer a “no fuss” replacement policy on faulty materials or workmanship for 30 days after the date of despatch.

Competitive PricesPlease contact our Sales Office to discuss product pricing. Special pricing is available for large quantity orders.

Help and AdviceOur staff are well trained to answer your queries and advise you on the suitability of our products for your various applications.

QuotationsWe are happy to provide quotations and pro-forma invoices in a very short time.

New CustomerIf you have never used us before, opening an account could not be easier. A credit account can be opened immediately upon receipt of your headed paper containing your company registration number and VAT number or upon completion of our simple Account Application Form, a copy of which is enclosed with your new catalogue. Simply complete and fax back on 01793 853 953.

PaymentsAlready existing customers have credit limit set up and pay on account. We accept cheques, BACS and CHAPS transfers and all major credit/ debit cards. All we need to know is your card number, start and expiry dates, issue number (if any) and security numbers together with your name and address.

Terms & ConditionsTerms & Conditions can be found at the back of this catalogue.

2010 Catalogue

p.4

p.7

p.4

p.18

p.22

p.25

p.33

p.44

p.56

p.62

p.73

p.78

Contents 01. Internal Telecommunications

02. Data Communications 03. Fibre Optics

04. Coax

05. Test Equipment

06. External Overhead

07. External Underground

08. Tools

09. Site Equipment

10. Power Tools 11. Safety

12. Consumables

01. Internal Telecommunications Cables

Box Connections

Block Terminals

Distribution Frames

Strips Connection

Line Jack Units

Adaptors

Jacks Test

Trunking & Accessories

1 Internal Telecommunications 14/8/09 17:15 Page 1

01. Internal Telecommunications

TELEPHONE CABLE CW1308 (INTERNAL)

These cables conform to the appropriate BT specification CW1308, 0.5mm tinnedcopper conductor, PVC insulation and colour coding for easy identification of thepaired conductors. An earth conductor of 1.38mm plain copper is included whereshown. Low smoke and fume cables as standard. Cables above 20 pair can be cutto length.

TELEPHONE CABLE CW1308B INTERNAL/ EXTERNAL

CODE PRODUCT SIZE COLOUR

TI02W200 CW1308 2 PAIR 200M WHITE

TI02B200 CW1308 2 PAIR 200M BLACK










TI10EW100 CW1308 10 PAIR + EARTH 100M WHITE


TI10EB200 CW1308 10 PAIR + EARTH 200M BLACK

TI20W CW1308 20 PAIR METRE WHITE

TI20B CW1308 20 PAIR METRE BLACK


CODE PRODUCT SIZE COLOUR





TI20EB200 CW1308 20 PAIR + EARTH 200M BLACK

TI25W CW1308 25 PAIR METRE WHITE

TI25EW CW1308 25 PAIR + EARTH METRE WHITE




TI50EB CW1308 50 PAIR + EARTH METRE BLACK



TI100EB CW1308 100 PAIR + EARTH METRE BLACK




CODE PRODUCT SIZE

TIE10E CW1308B 10 PAIR + EARTH METRE







CODE

CONDUCTOR SIZE (MM) PRODUCT SIZE

0.50 0.63 0.90

TE0505 TE05063 TE0509 CW1128 5 PAIR METRE





These cables are suitable for Internal and External use due to their UV resistantjacket. Similar to Standard CW1308 with 0.5mm tinned copper conductor, an earthconductor of 1.38mm plain copper and PVC insulation and colour coding but alsohave black Low Smoke Zero Halogen (LSOH) outer sheath.

These cables conform to the appropriateBT Specification CW1128 and consist ofplain copper conductors insulated withcellular polyethylene. The cables arepetroleum jelly filled and sheathed inblack polyethylene. Conductor sizes are0.50, 0.63 and 0.90mm. Can be cut tolengths required.

TELEPHONE CABLE CW1128 EXTERNAL

6


7


CABLE CW1128/ 1198 EXTERNAL ARMOURED

These cables conform to the appropriate BT Specification CW1128/1198. They aresame as the external cables with the additional steel wire armouring for direct burialapplications. The conductor size is 0.50mm.

CW1128/1198 5 PAIRTEA05 CW1128/1198 10 PAIRTEA10

CABLE CW1128/ 1252 EXTERNAL AERIAL

These cables conform to the general BT Specification CW1128/1252 and aredesigned for aerial installation. The cable is jelly filled or air core and has anintegral messenger wire/ strand. The steel suspension wire is incorporated within asingle sheath and the cable is supported in a figure 8 configuration. Standardconductor size is 0.50mm but 0.63 and 0.90mm are also available.

CW1128/1252 10 PAIRTA1005

CW1128/1198 20 PAIRTA2005

CW1128/1252 25 PAIRTA2505

CW1128/1198 50 PAIRTA5005

CW1128/1252 100 PAIRTA10005

CW1128/1252 200 PAIRTA20005

JUMPER WIRE CW1423

Tinned copper conductors 0.5mmdiameter, with PVC (cross-linked)insulation. Used for jumpering ondistribution frames.

BLUE/ YELLOW 200MT5200




RED/ WHITE 200MT5204



DISPENSER 1AT5250

A tubular steelframed dispenserfor dispensingWire Jumper andsmall drums ofcable.

CABLE DISPENSER ROLLERT5251

Size: 620 x 650 x 70mmMaximum drum width: 580mmMaximum weight capacity: 320kg

Suitable for the storing anddispensing of drums of cable.Manufactured from top qualitysteel, it incorporates spring loadedadjustable rollers and adjustablerubber rings which prevent anysideways movements. Lightweightconstruction for ease of mobility.

DISPENSER “A” FRAME

E3206

Universal Cable Drum Stand/ Dispenser, 24”high, frame supplied with removable bar.

BOX 500C6150

PACK 50C6151

CONNECTOR WIREINSULATED 8A/1

A two wire insulation displacementconnector. Used for jointing insulatedcopper conductors of 0.4 - 0.9mmdiameter.

CONNECTOR WIREINSULATED 11A

C6154

An insulation displacement connectorwhich can be used as a replacementfor either Connector Wire Insulated8A/1, 8B or Connector Dropwire 2A.

CONNECTOR WIRE INSULATED 8B & 8C

As Connector Wire Insulated 8B but isa three way type with a side entry.

Similar to Connector Wire Insulated8A/1 but allows three wire insulationdisplacement.

8BC6152

8CC6153


BOX CONNECTION 201D 20 PAIR

Low profile internal Box Connection.Includes 2 x 10 pair Strips Connection237A. Grey in colour.Dimensions: 170 x 120 x 43 mm

BOX CONNECTION530

T5010

1020 pair capacity lockablemetal connection box, 3 vert.

30 pair capacity, external, lockable,plastic connection box with 2 in/outletports. Accommodates 3 x StripsConnection 237A. Size: 217 x 134 x 92mm.

BOX CONNECTIONEXTERNAL 30 PAIR

T5011



T5012



T5013

BOX CONNECTION501

T5006

100 pair capacity lockable metalconnection box, single vert.

BOX CONNECTION502

T5007

200 pair capacity lockable metalconnection box, double vert.

BOX CONNECTION510

T5008

340 pair capacity lockable metalconnection box, single vert.

BOX CONNECTION520

T5009

680 pair capacity lockable metalconnection box, double vert.

BOX CONNECTION 251A T5002

50 pair capacity internal connection box,includes a backmount frame 5/11/5A and anearth post. Strips Connection 237A and StripsDesignation 51A are to be ordered separately.

Size: 206 x 160 x 90mm

201D T5000

High profile internal Box Connection.Includes 2 x 10 pair Strips Connection237A. Grey in colour. Dimensions: 160 x 143 x 54 mm

201D HIGH PROFILET5001

BOX CONNECTION 301AT5004

100 pair capacity internal connection box,includes a backmount frame 5/30/10A and anearth post. Strips Connection 237A and StripsDesignation 51A are to be ordered separately.

Size: 317 x 208 x 122mm

BOX CONNECTION 304AT5005

200 pair capacity internal connection box, includes two bases, two lids, abackmount frame 5/30/20A and two earth posts. Strips Connection 237A and StripsDesignation 51A are to be ordered separately.


8


A 3 pair IDC to 3 pair IDC terminalblock, used for the connecting ofinternal telephone cables.

BLOCK TERMINAL 77AT5030

A 3 pair screw to 3 pair screw terminalblock, used for the connecting ofinternal telephone cables.

BLOCK TERMINAL 77BT5031

A 4 pair IDC to 4 pair IDC terminalblock, used for the connecting ofinternal telephone cables.


A useful interface where UK IDCconnections have to be made to nonstandard diameter cables.


Comprises a 3 way input screw terminaland a 3 way output IDC terminal used to protect modern telephone equipmentfrom RF interference.

BLOCK TERMINAL 80ARF2

T5034

Normally used with Line Jack Unit 6C,it fits a number of applications includingtrunking, under floor boxes and cutouts. Supplied with an adhesive padwhich is to be placed on the undersideof the PCB at installation to protect thesoldered joints.


A 3 pair IDC to 3 pair screw terminalblock, used when interfacing internaltelephone cables to other cables.


A 6 pair connection box, incorporates12 separate IDC terminals.


FRAME DISTRIBUTION 108E

Supplied as either a single vert frame witha capacity for 700 pairs or as a double vertwith a capacity for 1400 pairs. Theseframes are designed so that they can bemounted side by side, back to back, wallmounted or free standing.

Dimensions: 2000 x 285 x 150mm

SUBRACKS

Horizontally mounted 19"subracks designed to fit anystandard 19" frame or cabinet.Supplied silver in colour and either recessed or flat. Verticalversions also available.

JUMPER RING 37BT5113

A plastic jumper ring for use within the200/300 series connection boxes.

FRAMEDISTRIBUTION 111B

T5016

A single vert distribution frame with anoverall capacity of 690 pairs.Dimensions: 2010 x 280 x 150mm.

SINGLE VERT 700 PAIR T5014

19" 3U 150 PAIR RECESSEDT5020

19" 3U 150 PAIR FLATT5021


19" 4U 180 PAIR FLAT T5023


19" 4U 210 PAIR FLATT5025


DOUBLE VERT 1400 PAIR T5015

9



PROTECTOR 21AT5103

A 3 pole over voltage gas discharge typesurge protector with integral fail safe facilityand a lower spark over-voltage therebyoffering a greater level of protection.Supersedes Protector 14A.

PROTECTOR LCU1PAT5105

Low profile lightening protection with theability to differentiate between signalsbased on frequency. Max capacity 10protectors per earth bar.

PROTECTOR 18CT5104

This is an encapsulatedversion of the Protector21A. Supplied withflying leads.

WEDGE LOCKING 23AT5107

Provides a temporary disconnection onStrips Connection 237A.


Prevents accidental insertion of test plugsinto priority circuits on Strips Connection237A.


Comb type 10 pair disconnection wedgefor opening contacts on Strips Connection237A. These wedges can be daisy chainedfor multiple cut over on disconnectionmodules.

STRIP CONNECTIONPOUYET

10 pair, high density disconnectionmodule supplied in either blue or greencolour.

STRIP CONNECTION237A

T5121STRIP CONNECTION237B

T5123

10 pair IDC disconnection module. Mountsonto a backmount frames, subracks andfits into most types of connection boxes.Used to join multipair Telecom and Datacables. Allows full disconnection facility.Cream in colour.

76 way red earth strip. 20 way red earth strip.

STRIP CONNECTION 237D & 237E

237DT5124

BLUET5110

GREENT5111

EARTHING BART5106

237ET5125

10 pair connection module. Grey in colour.

STRIP DESIGNATION 51ASTRIP CONNECTIONPOUYET EARTH

T5112

An earth type Pouyet connectionmodule, 10 pair

STRIP DESIGNATION53A

T5101

A box type label holder for use with StripConnection 237A. Supplied as a completeunit with label, label holder and clear plasticcover.

PROTECTORMOUNTING 5B

T5102

10 pair magazine for use with StripConnection 237A. Accepts up to 10 3 polegas discharge tubes 21A (Protector 21A).


10

A hinged type labelholder for use withStrip Connection 237A.Supplied as acomplete unit withlabel, label holder andclear plastic cover.

GREYT5100

BLUET5100B

GREENT5100G


BACK BOXES

For use with either single or doublegang telephone and data sockets.

LINE JACK UNITS 2 SERIES

Supplied complete with backbox andfixing screws, surface mounted, singleline.Size: 68 x 68 x 29mm

27MM SINGLET5039

32MM SINGLET5040

45MM SINGLET5041

28MM DOUBLET5042

32MM DOUBLET5043

LJU 2/1A (MASTER)LJU21A

LJU 2/2A (PBX MASTER)LJU22A

LJU 2/3A (SECONDARY)LJU23A


Supplied complete with fixing screws.Backbox to be ordered separately.Flush mounted, single line.Size: 86 x 86 x 29mm




NETWORK TERMINATING EQUIPMENT 5ALJU5A

The NTE5A is the industry standardtermination unit. This product is fittedinside customer premises and offers ademarcation point between networkand consumer wiring, it is supplied fullymastered, with ring capacitor, surgearrestor and out of service resistor.

ADSL LINE JACK UNITT5044

ADSL face plate with one RJ11 socketand one BT telephone socket. Enablesa broadband modem to plug inalongside a normal telephone deviceand filters unwanted noise which wouldotherwise appear due to the ADSLsignal.

ADSL MICROFILTERT5045

Plugs into a standard UK Telephonesocket providing a filtered BTtelephone socket and RJ11 socket forADSL Modem connection. Enablesreliable simultaneous transmission ofvoice and ADSL signals without anyloss of speech quality or datacorruption.Size: 60 x 46 x 26mm


Supplied complete with fixing screws.Backbox to be ordered separately.Flush mounted, two separate lines.Size: 86 x 86 x 29mm




LINE JACK UNITS REVERSED

These units are used for the installationof systems where the telephone cordsare fitted with plugs type 430A and630A.



LINE JACK UNIT 2/3CLJU23C

LINE JACK UNIT 3/3CLJU33C

11



QUADRUPLEADAPTOR

T5049

Standard line jack quadrupler whichallows four telephones to share asingle line.

COUPLER BT PLUGT5054

Straight line coupler used to joint twoBT type plugs.

COUPLER RJ45 T5055

Straight line coupler used to joint twoplugs type RJ45.

DOUBLE ADAPTOR

BT DOUBLER 4 WAYT5046

BT DOUBLER 6 WAYT5047


12

LINE JACK UNIT RJ11 FLUSH MOUNT

6 position, 6 conductorwestern electric stylesocket. Suppliedcomplete with fixings.Backbox to be orderedseparately.

Size: 84 x 84 x 9mm

LINE JACK UNIT RJ11 SURFACE MOUNTD5112

Single Surface Mount RJ11socket (2 series). 6 position, 6conductor western electric stylesocket. Supplied complete withbackbox and fixings.

Size: 65 x 65 x 29mm includingbackbox.

SINGLE FLUSH MOUNT RJ11 SOCKETD5110

DOUBLE FLUSH MOUNT RJ11 SOCKETD5111

DIRECT LINE PABX MASTERD5134

DIRECT LINE ADAPTOR SECONDARYD5135

LINE ADAPTOR SECONDARYD5131

LINE ADAPTOR ISDND5132

LINE ADAPTOR PABX MASTERD5130

LINE ADAPTORS

These units will maintain theflexibility of a flood wiredstructured cabling system.Plugging into an RJ45 walloutlet, these line adaptorsconvert a standard dataoutlet to a BT6L Outlet.

LINE ADAPTORS - DIRECT

An alternative to the flying adaptor,these units are small enough to befitted side by side in adjacent outlets.Recessed jack entrance meets BABTrequirements. Moulded in white flameretardant ABS plastic, complete withidentification label for easyidentification of version.

LINE ADAPTOR – SWITCHABLE D5142

Switchable versions allow the user toselect the function of the adaptor betweenPABX Master and Secondary with theflick of a switch.

LINE ADAPTOR COUPLERS

These couplers allow theconnection of telephonesfitted with the BT style plugsto RJ style sockets, usingstandard patch cords of anylength. Recessed jackentrance meets BABTrequirements.

LINE ADAPTOR COUPLER PABX MASTER D5146

LINE ADAPTOR COUPLER SECONDARY D5147


BELL 80DT5077

Industrial metal extension bell ringer, to be wired into a telephone socket.

BELL 50ET5078

Domestic extension bell, simplyplugged into a telephone socket.

SWITCH 2AT5076

Slide type switch used to switch linesfrom a phone system to another devicesuch as a fax machine.

PROTECTORMODULE 1A

T5096

Circuit link where no protectioncapability is required. For use withJacks Test 45, 47 and 49.

PROTECTORMODULE 2A

T5097

For use with Jacks Test 45, 47 and 49this is a three point lightening andmains voltage protector.

PROTECTORMODULE 6C

T5098

Updated version of Protector module2A

ADAPTOR BT – RJ11T5050

4 pin BT plug to RJ11 socket.2 pin RJ11 plug to BT socket.

ADAPTOR RJ11 - BTT5052 JACK 608A

COMPLETET5064

FACIAT5065

SHROUDT5066

JACK 608T5067

Jack 608A supplied either complete oras three separate component parts.

PLUGS TELEPHONE

431A RIGHT LATCHT5056

430A LEFT LATCHT5057

631A RIGHT LATCHT5058

630A LEFT LATCHT5059

Standard telephone plugs which can beeither 4 or 6 way, left or right handlatch.

PLUGS RJ11, RJ22 & RJ45

RJ11 4 PINT5060

RJ11 6 PINT5061

RJ22 4 PINT5062

RJ45 8 PINT5063

US type modular plugs stranded,supplied as 4, 6 or 8 pin.

CORD EXTENSION

Standard telephone extension leads,supplied with either a 4 or 6 way plug.Modem leads such as RJ11 male toRJ11 male or BT male to RJ11 femalecan be also supplied at various lengths.

4 WAY 10 METREST5070


6 WAY 3 METREST5072

6 WAY 5 METREST5073



4 WAY 3 METREST5068

4 WAY 5 METREST5069

13



TRUNKING

PVC TRUNKING ACCESSORIES

MINI TRUNKING

TMT16 16 X 16MM

TMT25 25 X 16MM

TMT38 38 X 16MM

TMT40 38 X 25MM

SELF ADHESIVE TRUNKING

TSFMT16 16 X 16MM

TSFMT25 25 X 16MM

TSFMT38 38 X 16MM

TSFMT40 38 X 25MM

(A) (B) (C) (D) (E) (F)INTERNAL EXTERNAL FLAT ANGLES FLAT TEES COUPLERS END CAPS

SIZE ANGLES ANGLES

16 X 16MM TMT16IA TMT16EA TMT16FA TMT16T TMT16C TMT16EC


28 X 28MM TCT10IA TCT10EA TCT10FA TCT10T TCT10C TCT10EC









CABLE TRUNKING

TCT10 28 X 28MM

TCT30 50 X 50MM

TCT20 54 X 28MM

TCT40 75 X 50MM

TCT50 75 X 75MM

TCT70 100 X 50MM

TCT60 100 X 100MM

TCT80 150 X 150MM

Manufactured in highquality PVC and suppliedin standard 3 metrelengths. Mini trunking isalso supplied in selfadhesive form.

A B C D E F


14

JACKS TEST

44/1CT5090

For use on Frames Distribution 7 seriesthis is a 100 pair terminating/testaccess block without lighteningprotection.

45/1AT5091

Initially supplied as a replacement for39/2A, this is a 100 pair terminatingblock with test access and five pointprotection facility. Used with ProtectorModule 1A/2A.

46/1BT5092

Supplied as a replacement for JacksTest 38/1B, this is a 100 pairterminating block with test accessfacility and is mounted on the exchangeside of a rack type MDF.

46/1A RNVT5093

Similar to Jacks Test 46/1A but has areverse number variant, that is to say itis numbered from top to bottom. It is a100 pair terminating block with testaccess facility and is mounted on theexchange side of a pre-rack type MDF.

46/1B RNVT5094

Similar to Jacks Test 46/1B but has areverse number variant. It is a 100 pairterminating block including test accessfacility for mounting on the exchangeside of a rack type MDF.

47/1A RNVT5095

Similar to Jacks Test 47/1A but withreverse number variant. This is a 100pair terminating block with test accessand five point protection facility. It ismounted on the exchange side of apre-rack type MDF and used withProtector Module 2A.


02. Data Communications Cables

Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors

Cabinets & Accessories

2 Data Comms file 12/8/09 11:54 Page 1

16

02. Data Communications

CAT 5E UNSHIELDED TWISTED PAIR (UTP) CABLED4000

• 4 pair, category 5e UTP cable• 24AWG solid conductor• Tested for Power Sum Next, ELFEXT• and more• Fluke tested at 100 metres • Conforms to enhanced performance • CAT 5 specification• 305 to 0 metre markings• supplied in strong, stackable • cardboard boxes

CAT5E UNSHIELDED TWISTED PAIR (UTP) CABLE LSOHD4005

• 4 pair, category 5e UTP cable• 24AWG solid conductor• Low smoke zero halogen outer sheath• Tested for Power Sum Next, ELFEXT• and more• Fluke tested at 100 metres • 305 to 0 metre markings• Supplied in strong, stackable • cardboard boxes

CAT 6 UNSHIELDED TWISTED PAIR (UTP) CABLE LSOHD4020

• 4 pair, category 6 UTP cable• 23AWG solid conductor• Low smoke zero halogen outer sheath• Designed for delivering 1Gbps • performance• Fluke tested at 100 metres • 305 to 0 metre markings• Supplied in strong cardboard boxes

CAT5E UNSHIELDED TWISTED PAIR (UTP) EXTERNAL CABLE

D4010

• Category 5E Compliant• UV Resistant• Duct Grade• External use

Solid conductor, 4 pair UTP cable witha black polyethylene outer sheath.Supplied in strong cardboard boxes inlengths of 305 metres.

CAT5E FOIL SHIELDED TWISTED PAIR (FTP) CABLE

High performance, solid conductor, 4 pairFTP cable suitable for installations wherehigh levels of EMI and RFI could bepresent. Supplied in strong cardboardboxes in lengths of 305 metres.

• Category 5E Compliant• Grey PVC or Violet LSOH Outer Sheath• 100% Aluminium Foil Tape screen

GREY PVC SHEATHD4014

VIOLET LSOH SHEATHD4015

Telkom International is the exclusive distributor of Aramisstructured cabling product range.• All Aramis products are manufactured to the • highest specification• All Aramis Cables are manufactured inaccordance with • ISO 11801 & EIA/TIA 568B, EN51073• Fluke tested at 100metres• Supplied in strong stackable boxes

For data testers, goto page 56


17


CAT5E UTP PATCH LEADS

• 4 pair UTP moulded patch leads • 50 Micron RJ5 plugs• Various colours and lengths available• Individually bagged• Other lengths available on request

2M LENGTHD4240

3M LENGTHD4241

4M LENGTHD4242

5M LENGTHD4243

10M LENGTHD4244

LENGTH (M) GREY BLUE RED GREEN YELLOW PURPLE

0.5 D4100 D4110 D4120 D4130 D4140 D4150

1.0 D4101 D4111 D4121 D4131 D4141 D4151

1.5 D4102 D4112 D4122 D4132 D4142 D4152

2.0 D4103 D4113 D4123 D4133 D4143 D4153

3.0 D4104 D4114 D4124 D4134 D4144 D4154

4.0 D4105 D4115 D4125 D4135 D4145 D4155

5.0 D4106 D4116 D4126 D4136 D4146 D4156

10 D4107 D4117 D4127 D4137 D4147 D4157

15 D4108 D4118 D4128 D4138 D4148 D4158

20 D4109 D4119 D4129 D4139 D4149 D4159

CAT 6 UTP PATCH LEADS CAT 5E RJ45 PATCH LEADS CROSSOVER

• 4 pair UTP booted patch leads • 50 Micron RJ5 plugs• Various colours and lengths available• Individually bagged

Stranded conductor 4 pair UTPbooted leads for use whencascading equipment withoutcrossover ports. Supplied in variouscolours and sizes.

LENGTH (M) GREY BLUE RED GREEN YELLOW

1.0 D4300 D4310 D4320 D4330 D4340

2.0 D4301 D4311 D4321 D4331 D4341

3.0 D4302 D4312 D4322 D4332 D4342

4.0 D4303 D4313 D4323 D4333 D4343

5.0 D4304 D4314 D4324 D4334 D4344

10 D4305 D4315 D4325 D4335 D4345

15 D4306 D4316 D4326 D4336 D4346

20 D4307 D4317 D4327 D4337 D4347


18


CAT 5E RJ45 UNSHIELDED MODULED5050

Category 5E compliant shutteredmodule with built in slide label.

Dimensions: 50 x 25mm.

CAT 5E RJ45 UNSHIELDED 3 IN 1 MODULES

The new 3 in 1 module offers the ultimate in flexibility, spaceutilisation and ease of installation. The totally modular design

allows the mounting of up to 3 shuttered RJ45 ports in astandard flat or bevelled single gang faceplate, or up to

6 in a double gang fascia. High density design andindividual port slide labelling system. Dimensions: 16.65 x 50mm. Supplied individuallyor as a complete set comprising of 3 modules and

a single gang bevelled face plate.

HALF BLANK (HALF WIDTH OF MODULE)D5053

FULL BLANK (WIDTH OF MODULE)D5052

SINGLE 3 IN 1 RJ45 MODULED5051

COMPLETE ASSEMBLED SET D5054

CAT 5E RJ45 UNSHIELDED MODULE 6CD5055

Ideal for floor box installationsdue to their compact two piecedesign resulting in low profilefinish. Supplied with built inslide label system.


Category 5E RJ45 modules comply withthe EIA TIA Standard for enhancedCategory 5. Each shuttered module issupplied with a slide label field andspace above to allow for use of selfadhesive or further labelling. Fits 27mmback box when used with bevelledfaceplate.


CAT 5E RJ45 SHIELDED MODULED5056

ULTRASLIM MODULED5057

Ultraslim modules project only15mm into a backbox. They arefully CAT 5E compliant and arethe smallest totally enclosedmodules available offering extraprotection. Supplied completewith punchdown labelling andfull installation instructions.

VOICE MODULE

Euro and 6C style voice outlets with standard slidelabel system and an LJU right hand polarised socketas standard. A left hand polarised version is available.

Euro style Module dimensions: 50 x 25mm6C style Module dimensions: 37 x 22mm

VOICE MODULE 6C SECONDARY D5062

VOICE MODULE EURO PABX D5061

VOICE MODULE EURO SECONDARYD5060

VOICE MODULE 6C PABX D5063

KRONE HIGHBAND 8 PAIR CAT 5E MODULED5160

The ADC Krone 8 pair high performance strips enable the installer to both jumperand patch on the same module. The strips terminate 2 x 4 pair UTP cable. Therecommended use is to hard wire the entire system (this will override the installedconnections) for all additions, moves and changes. The highband strips enablecentre port test access for individual data circuits, which minimises any networkdowntime. The size of these strips is identical to the Strips 237A which allowsmounting on standard backmount frames.

CAT 6 RJ45 UNSHIELDED MODULED5066

Category 6 RJ45 Module designedto meet or exceed the latest ISOand TIA requirements for Category6 compliance. Supplied with built inslide label system. Fit 27mm backbox when used with bevelledfaceplate. These outlets alsoprovide backward compatibilitywith the CAT 5 and 5E systems.



19


CAT 6 RJ45 UNSHIELDED MODULE 6CD5069

Ideal for floor box installationsdue to their compact two piecedesign resulting in low profilefinish. Supplied with built inslide label system.


CAT 6 RJ45 UNSHIELDED 3 IN 1 MODULES

The new 3 in 1 module offers the ultimate in flexibility, spaceutilisation and ease of installation. The totally modular design

allows the mounting of up to 3 shuttered RJ45 ports in astandard flat or bevelled single gang faceplate, or up to 6

in a double gang fascia. High density design andindividual port slide labelling system. Dimensions: 16.65 x 50mm. Supplied individuallyor as a complete set comprising of 3 modules and

a single gang bevelled face plate.

HALF BLANK (HALF WIDTH OF MODULE)D5053

COMPLETE ASSEMBLED SET D5068

KEYSTONE SHUTTERED MODULE (50 X 25 MM)D5077

KEYSTONE SHUTTERED MODULE 6C (38 X 25 MM) D5078

Keystone shuttered modules tosuit CAT 5E and CAT6 KeystoneJacks. Moulded in white flameretardant ABS plastic.

KEYSTONE SHUTTERED MODULE

KEYSTONE JACK PATCH PANEL FRAMED5018

Suitable for both CAT 5E and CAT 6 keystone jacks, this 24 port 1U empty panelallows for flexible port density from 1 to 24 ports. Supplied unloaded complete witha rear management bar.

FACEPLATES

Available in bevelled or flat style and singleor double gang. Single faceplate accepts 1or 2 RJ45 Modules, the double faceplatewill accept up to 4 modules. Supplied withfixing screws.

FACEPLATE FLAT SINGLE GANGD5082

FACEPLATE BEVELLED DOUBLE GANGD5081

FACEPLATE BEVELLED SINGLE GANGD5080

FACEPLATE FLAT DOUBLE GANGD5083

LOADED WITH 1 X RJ45 MODULE AND BLANKSD5084

LOADED WITH 2 X RJ45 MODULED5085

LOADED WITH 1 X RJ45 SHIELDED MODULE AND BLANKSD5086

LOADED WITH 2 X RJ45 SHIELDED MODULED5087

FACEPLATE BEVELLED UNSHIELDED CAT 5E LOADED

Pre-loaded single gang bevelledfaceplate supplied complete with eitherone or two RJ45 Modules and blanks.

Fits 27mm back box.

FACEPLATE BEVELLED SHIELDED CAT 5E LOADED

Pre-loaded single gang bevelledfaceplate supplied complete witheither one or two RJ45 ShieldedModules and blanks whereappropriate.

Fits 27mm back box.

FULL BLANK (WIDTH OF MODULE)D5052

SINGLE 3 IN 1 RJ45 MODULED5067

KEYSTONE MODULAR JACK

A Jack which offers superior performance andexceeds the requirements for CAT 5E. Thismakes it an ideal component for use in the mostdemanding network systems.

KEYSTONE UTP CAT 5ED5075

KEYSTONE STP CAT 5ED5076


20


BLANKS

Used with faceplates and RJ45modules.

FACEPLATES 6C

Single and double gang faceplates andassociate blanks, specifically designed for themounting of the 6C voice and data modules.

DOUBLE GANG FACEPLATE 6CD5094

SINGLE GANG FACEPLATE 6CD5093

FULL BLANKD5095

HALF BLANK (12.5MM)D5089

FULL BLANK (25MM)D5090

BLANKING PLATE

Single and double gang blanking plate.

BLANKING PLATE SINGLED5091

BLANKING PLATE DOUBLE D5092

PATCH PANEL CAT5E UNSHIELDED

Black RJ45 Category 5E patch panelssupplied complete with slide labelsystem, cage nuts and bolts and rearcable management bar.

48 PORT 2UD5004

24 PORT 1UD5002

16 PORT 1UD5001

48 PORT 3UD5005

THROUGH COUPLER PANEL CAT5EUNSHIELDED

PATCH PANEL CAT 5EUNSHIELDED RIGHT ANGLE

D5015

Ideal for temporary or emergency cabling installation withstandard RJ45 connector on both the front and rear of thepanel. Supplied with cage nuts and bolts and label kit.

24 port right angle patch panel withintegral rear cable management. TheLSA compatible termination points arepositioned horizontally to the panelfacial for easy and quick cableinstallation.

24 PORT 1UD5010

48 PORT 2UD5011

VOICE RJ45 PATCH PANELS

1U panel which provides a cost effective method ofterminating and presenting multipair voice cables. Each has25 or 50 RJ45 ports per 1U and an integral rear cablemanagement tray. Each port is numbered and each can bewired with up to 3 pairs.

25 PORT 3 PAIR 1UD5020

50 PORT 3 PAIR 1UD5021

PATCH PANELS CAT 6 UNSHIELDED

Black RJ45 Category 6 patch panelssupplied complete with slide label systemand cage nuts. Designed to meet orexceed the latest ISO and TIArequirements for Category 6 compliance.Optional rear cable management traysare available.

REAR CABLE MANAGEMENT TRAY 1UD5028

48 PORT 2UD5027

24 PORT 1UD5026

REAR CABLE MANAGEMENT TRAY 2UD5029


21


FLOOR BOXES

These floor boxes are quick and easy to install. Twin swivelling clamps secure thefloor box to the floor panel. By design, adjustable dividers enable this versatile floorbox to be configured into 3 or 4 compartments dependent upon the number ofoutlets required. A wide range of accessory plates are available for power, data andtelecommunication services.

Features: • Useable height to lid – 44mm• One size cut out for 3 or 4 compartment box 292 x 201mm• Overall dimensions 310 x 220 x 100mm deep• 20 & 25mm knockouts for cable or conduit entry• Lid and cable guides can be removed and re-orientated through 180 degrees• Both Compartment Boxes are supplied with 1 x twin power

4 COMPARTMENT FLOORBOX EMPTYD5203

3 COMPARTMENT FLOORBOXD5200

MOUNTING PLATES 4 & 6 WAY

Standard (4 way) and High Density (8way) plates allowing for RJ45 Modules6C to be fitted.

MOUNTING PLATESDOUBLE GANG

D5211

Accepts 2 Single gang dataaccessories.

MOUNTING PLATESTWIN GANG

D5212

Accepts moulded twin gang accessory.MOUNTING PLATES 4 WAYD5209

MOUNTING PLATES 6 WAYD5210

MOUNTING PLATEEUROMOD

D5213

Euromod plate for 3 compartment box.

MOUNTING BLANKPLATE

D5214

Flat blank plate for 3 compartmentboxes.

TWIN SWITCHEDSOCKET

D5216

Twin Switched Sockets for 3 and 4compartment floor boxes.


22


CABINETS WALL MOUNTED 390MM DEEP

• 600mm wide x 390mm deep• Quick release front door• Lockable, removable side panels (slam latch handles)• Two sets of adjustable 19” profiles• Glass front door• Available in Grey or Black

SIZE6U9U12U15U18U21U

GREYD2000D2002D2004D2006D2008D2010

BLACKD2001D2003D2005D2007D2009D2011


• 600mm wide x 500mm deep• Quick release front door• Lockable, removable side panels (slam latch handles)• Two sets of adjustable 19” profiles• Glass front door• Available in Grey or Black


GREYD2021D2023D2025D2027D2029D2031

BLACKD2022D2024D2026D2028D2030D2032


• 600mm wide x 450mm deep• Quick release front door• Adjustable uprights at front as standard• Gland plates top and bottom• Glass front door• Grey colour as standard


CODED2015D2016D2017D2018D2019D2020

CABINETS WALL MOUNTED FLAT PACK

• 600mm wide x 500mm deep• Fixed Side Panels• Choice of Heights• Adjustable 19” profiles• Full assembly instructions• Available in grey colour only


CODED2040D2041D2042D2043D2044D2045


23


CABINETS FREE STANDING GREY 600 SERIES

High quality free standing cabinets suppliedcomplete with:

• Front & Rear Adjustable 19” mountingangles

• Steel rear door• Lockable framed glass front door • Lockable quick release (lift off) side panels• Jacking Feet and Load Bearing Castors• Two removable gland plates for cable entry

at the top panel can be easily replaced byfan trays for forced ventilation

• Suitable for up to 450mm shelves• Flat Packs available

SIZE WIDTH(MM) DEPTH(MM) HEIGHT(MM)12U 600 600 71015U 600 600 84318U 600 600 97622U 600 600 115422U 600 800 115427U 600 600 137627U 600 800 137627U 600 1000 137639U 600 600 190939U 600 800 190939U 600 1000 190942U 600 600 204242U 600 800 204242U 600 1000 204247U 600 600 226547U 600 800 226547U 600 1000 2265

CODED2100D2101D2102D2103D2104D2105D2106D2107D2108D2109D2110D2111D2112D2113D2114D2115D2116

CABINETS FREE STANDING GREY 800 SERIES


• 19” mounting angles fitted to horizontalmounting channels, providing front andrear movement

• Steel rear door• Lockable framed glass front door • Lockable quick release (lift off) side panels• Full height vertical management panels to

front• Jacking Feet and Load Bearing Castors• Two removable gland plates for cable entry



SIZE WIDTH(MM) DEPTH(MM) HEIGHT(MM)22U 800 600 115422U 800 800 115427U 800 600 137627U 800 800 137627U 800 1000 137639U 800 600 190939U 800 800 190939U 800 1000 190942U 800 600 204242U 800 800 204242U 800 1000 204247U 800 600 226547U 800 800 226547U 800 1000 2265

CODED2132D2133D2134D2135D2136D2137D2138D2139D2140D2141D2142D2143D2144D2145

WALL MOUNT FRAME HINGED

Ideal for cabling installations of a small number ofpoints. Any number of units can be fixed together andthe optional cover plate can be fixed top or bottom.

• Compact low profile design• 150mm Deep• Hinged frame allows rear access• Optional top and bottom cover

SIZE2U 3U4U6UTOP OR BOTTOM PLATE

CODED2035D2036D2037D2038D2039


24


CABINETS FREE STANDING BLACK 600 SERIES


• Front & Rear Adjustable 19” mountingangles

• Steel rear door• Lockable framed glass front door • Lockable quick release (lift off) side panels• Jacking Feet and Load Bearing Castors• Two removable gland plates for cable entry



SIZE WIDTH(MM) DEPTH(MM) HEIGHT(MM)27U 600 600 137627U 600 800 137627U 600 1000 137639U 600 600 190939U 600 800 190939U 600 1000 190942U 600 600 204242U 600 800 204242U 600 1000 204247U 600 600 226547U 600 800 226547U 600 1000 2265

CODED2120D2121D2122D2123D2124D2125D2126D2127D2128D2129D2130D2131

CABINETS FREE STANDING BLACK 800 SERIES

High quality free standing cabinetssupplied complete with:

• 19” mounting angles fitted tohorizontal mounting channels,providing front and rearmovement

• Steel rear door• Lockable framed glass front door • Lockable quick release (lift off)

side panels• Full height vertical management

panels to front• Jacking Feet and Load Bearing

Castors• Two removable gland plates for

cable entry at the top panel canbe easily replaced by fan traysfor forced ventilation

• Suitable for up to 650mmshelves

• Flat Packs available

SIZE WIDTH(MM) DEPTH(MM) HEIGHT(MM)27U 800 600 137627U 800 800 137627U 800 1000 137639U 800 600 190939U 800 800 190939U 800 1000 190942U 800 600 204242U 800 800 204242U 800 1000 204247U 800 600 226547U 800 800 226547U 800 1000 2265

CODED2146D2147D2148D2149D2150D2151D2152D2153D2154D2155D2156D2157

CABINET PLINTH

Used for raising cabinets whenmounted on solid floorsproviding additional cableaccess and increasing thecabinet by 100mm. The plinthwill accept castors or jackingfeet. Available in grey or black.Height: 100mm.

WIDTH (MM) DEPTH (MM)600 600600 800600 1000800 600800 800800 1000

GREYD2200D2201D2202D2203D2204D2205

BLACKD2206D2207D2208D2209D2210D2211

CASTORS HEAVYDUTY

D2213

Set of 4 castors for ease of movement ofcabinets.

JACKING FEETD2214

Used for levelling on uneven surfacesand also to prevent movement whenused in conjunction with castors.Supplied in sets of 4.


25


ROOF MOUNT FANS

Supplied with mains lead CEE22 to 13 AMP plug, these 230V 50Hz fans fit into the roofsection of the floor standing cabinets.

Quick and easy to fitAir flow 78 – 84M3/ HR per fanNoise level 27 – 28dBAMaximum of 4 fans per cabinetAvailable in grey or black

CABINET SHELVES FIXED CABINET SHELVES SLIDING

Vented shelves in grey or black painted finish.

ROOF FAN 2 WAY GREYROOF FAN 2 WAY BLACKROOF FAN 4 WAY GREYROOF FAN 4 WAY BLACK

D2215D2216D2217D2218

RACK MOUNT FANS

These 19” rack mounted fan trays are supplied with 3 or 6 230V 50Hz fans, mains leadCEE22 to 13 AMP plug and occupy 1U of rack space.

• Front panel fitted with Neon light• 3 way unit 238mm deep• 6 way unit 370mm deep• Available in grey or black

RACK FAN 3 WAY GREYRACK FAN 3 WAY BLACKRACK FAN 6 WAY GREYRACK FAN 6 WAY BLACK

D2220D2221D2222D2223

Vented shelves in grey or black painted finish.

DEPTH COLOUR LOADING SUITABLE FOR (MM) (KG) RACK DEPTH190 GREY 35 600/800/1000190 BLACK 35 600/800/1000400 GREY 35 600/800/1000400 BLACK 35 600/800/1000450 GREY 90 600/800/1000450 BLACK 90 600/800/1000460 GREY 45 600/800/1000550 GREY 90 800/1000550 BLACK 90 800/1000555 GREY 45 800/1000650 GREY 90 800/1000650 BLACK 90 800/1000660 GREY 45 800/1000750 GREY 90 1000750 BLACK 90 1000

CODE

D2230D2231D2232D2233D2234D2235D2236D2237D2238D2239D2240D2241D2242D2243D2244

DEPTH COLOUR LOADING SUITABLE FOR (MM) (KG) RACK DEPTH450 GREY 45 600/800/1000450 BLACK 45 600/800/1000550 GREY 45 800/1000550 BLACK 45 800/1000650 GREY 45 800/1000650 BLACK 45 800/1000750 GREY 45 1000750 BLACK 45 1000

CODE

D2250D2251D2252D2253D2254D2255D2256D2257


26


CABINET SHELVES FRONT MOUNT MODEM/ CANTILEVER

To be fixed directly to the front of the19” mounting angles.

• Compatible with 600 and 800series cabinets

• Max. load 35 kg• Supplied in grey or black• Vented

190MM DEEP 1U GREY190MM DEEP 1U BLACK400MM DEEP 2U GREY 400MM DEEP 2U BLACK

D2260D2261D2262D2263

CABINET SHELF KEYBOARD TURNTABLED2266

For use in a standard 19” wide rack.Universal mounting, fits upright set between450 and 750mm deep.

• Fitted with Extension Slides• Fits 600mm Deep Cabinets• Light grey colour

CABINET CABLE TRAY

The lightweight design makes installationand cable feed quick and easy. Bracket isrequired for fitting trays.

42U47UBRACKET

D2274D2275D2276

22U 27U32U39U

D2270D2271D2272D2273

CABINET CABLEMANAGEMENT BARS

CABLE TIDY 1U CABLE TIDY 2U

D2274D2280D2281

Used as a wiring aid.

• Horizontal • Black colour

CABINET LETTERBOXBRUSH STRIPS 19”

1U 2U

D2274D2284D2285

CABINET BRUSH COVERTOP ENTRY

D2282

Cable entry top panel fitted with brush stripsto restrict particle ingress.

Size: 450 x 200mm.

EARTH BONDING KITD2292

An Earth Bonding Kit is installed between theframe and doors, all panels are fitted withearth studs.

CABINET BRUSH STRIPPANEL 1U

D2283

Suitable for fitting below patch panels toallow cable entry into the rack. The rearcable support section incorporates holes forsecuring cables.

CAGE NUT KITD2288

Nuts & Bolts to aid the mounting ofaccessories in 19” cabinets. Supplied in packof 50.

CABINET BAYING KITD2291

The bolt-together kit is used to securecabinets together in a bay or suite.

CABLE TIDY LOOPS

CABLE TIDY LOOP SMALL CABLE TIDY LOOP LARGE

D2274D2293D2294

Fit 19” mounting rails in any 800mm cabinetsoffering approx. 6500sq mm of cablingspace.


27


POWER DISTRIBUTION UNITS

For the supply of mains power to 19” rackmounted equipment.

4 WAY VERTICAL4 WAY HORIZONTAL5 WAY VERTICAL5 WAY HORIZONTAL6 WAY VERTICAL6 WAY HORIZONTAL8 WAY VERTICAL8 WAY HORIZONTAL10 WAY VERTICAL12 WAY VERTICAL

D2300D2301D2302D2303D2304D2305D2306D2307D2308D2309

POWER DISTRIBUTION UNITS FILTERED

4 WAY VERTICAL4 WAY HORIZONTAL5 WAY VERTICAL5 WAY HORIZONTAL6 WAY VERTICAL6 WAY HORIZONTAL8 WAY VERTICAL10 WAY VERTICAL12 WAY VERTICAL

D2310D2311D2312D2313D2314D2315D2316D2317D2318

Feature an on-board protection system toguard against surges, spikes and mainsborne transients. Suitable for high systemexposure levels for location categories A & B(6kV 3 kA) and medium system exposurelevel, location category C (BS6651:1992appendix C). Mains surge protection 6.5kApeak current. 2U of rack space required forhorizontal units. Supplied with 3 meter leadand illuminated & fully shrouded switch.

POWER DISTRIBUTION UNITS WITH BS4343 PLUG

Standard power distribution units for supplyof mains power to 19” mounted equipment.The plug leads on this range are terminatedwith an industrial specification BS EN 60309(BS4343) 2P+E 16A, 250V connector.

• Robust all aluminium housing• Illuminated & fully shrouded switch• Unit overall rating 16a or 32A, 250V

4 WAY BS4343 HORIZONTAL 16A6 WAY BS4343 HORIZONTAL 16A8 WAY BS4343 VERTICAL16A10 WAY BS4343 VERTICAL 16A12 WAY BS4343 VERTICAL 16A4 WAY BS4343 HORIZONTAL 32A6 WAY BS4343 HORIZONTAL 32A8 WAY BS4343 VERTICAL 32A10 WAY BS4343 VERTICAL 32A12 WAY BS4343 VERTICAL 32A

D2320D2321D2322D2323D2324D2325D2326D2327D2328D2329

POWER DISTRIBUTION UNITS IEC 320

19” power distribution units with IEC320 C13sockets.

• Illuminated & fully shrouded switch• External earth facility• Choice of standard or filtered design• Unit overall rating 13A, 250V

4 WAY IEC HORIZONTAL 4 WAY IEC HORIZONTAL FILTERED6 WAY IEC HORIZONTAL6 WAY IEC HORIZONTAL FILTERED8 WAY IEC VERTICAL 8 WAY IEC VERTICAL FILTERED10 WAY IEC VERTICAL 10 WAY IEC VERTICAL FILTERED12 WAY IEC VERTICAL 12 WAY IEC VERTICAL FILTERED

D2330D2331D2332D2333D2334D2335D2336D2337D2338D2339



Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


03. Fibre Optics Cables

Pigtails

Patch Cords

Connectors

Adaptors

Patch Panels

Patch Boxes

Consumables

Fusion Splicers

3 fibre cable 09.qxd 12/8/09 11:41 Page 1

30

03. Fibre Optics

INTERNAL/EXTERNAL GRADE OF FIBRE OPTIC CABLES

These cables are constructed around a silica gel filled tube containing up to 24colour coded 250μm buffered fibres. This tube is covered with aramid strengthmembers and a black flame retardant LSZH outer sheath.

Loose Tube FibreNO. OF 62.5/125 50/125 50/125 9/125 CORES OM1 OM2 OM3 OS1

4 F1001 F1006 F1011 F1016

8 F1002 F1007 F1012 F1017

12 F1003 F1008 F1013 F1018

16 F1004 F1009 F1014 F1019

24 F1005 F1010 F1015 F1020

The Fibre Cables OM1, OM2 and OM3 are all multimode.The Fibre Cable OS1 is singlemode equivalent to G652 cable.

OM1 and OM2 cables are manufactured to current specifications. OM3 is the new laser enhanced 50/125fibre with vastly improved bandwidth.

The table below will give you an indication of the actual cable required for specific applications.

DISTANCE

OPTICAL PERFORMANCE

CABLE TYPE TYPICAL/MAXIMUM ATTENUATION MINIMUM BANDWIDTH

(DB/KM) (MHZ/KM)

850NM – 1300NM 850NM – 1300NM

OM1 62.5/125 2.7/3.2 – 0.6/1.1 200 – 600

OM2 50/125 2.4/3.0 – 0.7/1.0 500 – 500

OM3 50/125 3.0 - 1500 -

TYPICAL/MAXIMUM ATTENUATION DISPERTION COEFFICIENT

(DB/KM) PS//(NM.KM)

1310NM – 1550NM 1310NM – 1550NM

OS1 9/125 0.32/0.4 – 0.21/0.3 3.0 - 18

SPEED 300M 500M 2,000M

100 MB/S OM1 OM1 OM1

1,000 MB/S OM1 OM2 OS1

10,000 MB/S OM3 OS1 OS1

FIBRE OPTIC CABLE SPECIFICATIONS


31

03. Fibre Optics

FIBRE OPTIC PIGTAILS

The pigtails are constructed from high quality connectors and 8/125 OS1, 62.5/125 OM1 and 50/125 OM2 and OM3 gradecables. Each Pigtail incorporates a short strain relief boot and is supplied with a test report detailing insertion loss.

PIGTAIL LENGTH 62.5/125 50/125 50/125 8/125TYPE OM1 OM2 OM3 OS1

ST 1M F2100 F2101 F2102 F2103

SC 1M F2130 F2131 F2132 F2133

MTRJ 1M F2160 F2161 F2162 F2163

LC 1M F2190 F2191 F2192 F2193

INTERNAL/EXTERNAL GRADE OF FIBRE OPTIC CABLES

These cables are constructed from a number of 900μm buffered fibres which arecolour coded and packed in water resistant rodent protected strength members.The black outer sheath is both flame retardant and LSZH. It is light, easy to installand cost effective.

All cables can be cut and supplied to the exact lengths required.Other sizes of Internal/External cables are available on request.

NO. OF 62.5/125 50/125 50/125 9/125 CORES OM1 OM2 OM3 OS1

4 F1031 F1036 F1041 F1046

8 F1032 F1037 F1042 F1047

12 F1033 F1038 F1043 F1048

16 F1034 F1039 F1044 F1049

24 F1035 F1040 F1045 F1050

INTERNAL/ EXTERNAL GRADE CST FIBRE CABLE

This corrugated steel tape cable has a blue rodent protected outer sheath, and theloose tube containing up to 24 individual fibres, packed in aramid strengthelements. The steel tape and the outer sheath are LSZH.

CST = Corrugated Steel TapeAll cables can be cut and supplied to the exact lengths required.

NO. OF 62.5/125 50/125 50/125 9/125 CORES OM1 OM2 OM3 OS1

4 F1061 F1066 F1071 F1076

8 F1062 F1067 F1072 F1077

12 F1063 F1068 F1073 F1078

16 F1064 F1069 F1074 F1079

24 F1065 F1070 F1075 F1080

INTERNAL/ EXTERNAL GRADE SWA FIBRE CABLE

These steel wire armoured cables are crush resistant and suitable for direct burialand the most demanding of installations. They are also suitable for flooded ducts. The standard single loose tube cables are packed into a strong but flexiblefibreglass waterblocking strength member. An internal sheath of black LSZHmaterial is then applied and a rip cord is inserted under this sheath to ease cablestripping. Lengths of steel wire armouring and a black LSZH over-sheath are added.

All cables can be cut and supplied to the exact lengths required.

Other jacket colours, core counts and OM3 cables are available.Please contact our sales office.

NO. OF 62.5/125 50/125 9/125 CORES OM1 OM2 OS1

4 F1081 F1084 F1087

12 F1082 F1085 F1088

24 F1083 F1086 F1089

Tight Buffered Fibre

Fibre Optic Loose Tube Single Sheath RodentProtected CST Armoured Cable

Fibre Optic Loose Tube Single Sheath RodentProtected SWA Armoured Cable


32

03. Fibre Optics

FIBRE OPTIC PATCH CORDS MULTIMODE 62.5/125 OM1

LENGTH ST-ST SC-SC ST-SC MTRJ-MTRJ MTRJ-SC MTRJ-ST MTRJ-LC LC-LC LC-SC LC-ST(METRE) DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX

1 F3101 F3111 F3121 F3131 F3141 F3151 F3161 F3171 F3181 F3191

2 F3102 F3112 F3122 F3132 F3142 F3152 F3162 F3172 F3182 F3192

3 F3103 F3113 F3123 F3133 F3143 F3153 F3163 F3173 F3183 F3193

4 F3104 F3114 F3124 F3134 F3144 F3154 F3164 F3174 F3184 F3194

5 F3105 F3115 F3125 F3135 F3145 F3155 F3165 F3175 F3185 F3195

6 F3106 F3116 F3126 F3136 F3146 F3156 F3166 F3176 F3186 F3196

7 F3107 F3117 F3127 F3137 F3147 F3157 F3167 F3177 F3187 F3197

10 F3108 F3118 F3128 F3138 F3148 F3158 F3168 F3178 F3188 F3198

15 F3109 F3119 F3129 F3139 F3149 F3159 F3169 F3179 F3189 F3199

20 F3110 F3120 F3130 F3140 F3150 F3160 F3170 F3180 F3190 F3200

Constructed from high quality connectors and 62.5/125 OM1 grade cable, eachpatch cord incorporates a short strain relief boot and is supplied with a test reportdetailing insertion loss. All patch cords are grey, LSOH and are individually baggedand labelled.

FIBRE OPTIC PATCH CORDS MULTIMODE 50/125 OM2

LENGTH ST-ST SC-SC ST-SC MTRJ-MTRJ MTRJ-SC MTRJ-ST MTRJ-LC LC-LC LC-SC LC-ST(METRE) DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX

0.5 F3300 F3311 F3322 F3333 F3344 F3355 F3366 F3377 F3388 F3399

1 F3301 F3312 F3323 F3334 F3345 F3356 F3367 F3378 F3389 F3400

2 F3302 F3313 F3324 F3335 F3346 F3357 F3368 F3379 F3390 F3401

3 F3303 F3314 F3325 F3336 F3347 F3358 F3369 F3380 F3391 F3402

4 F3304 F3315 F3326 F3337 F3348 F3359 F3370 F3381 F3392 F3403

5 F3305 F3316 F3327 F3338 F3349 F3360 F3371 F3382 F3393 F3404

6 F3306 F3317 F3328 F3339 F3350 F3361 F3372 F3383 F3394 F3405

7 F3307 F3318 F3329 F3340 F3351 F3362 F3373 F3384 F3395 F3406

10 F3308 F3319 F3330 F3341 F3352 F3363 F3374 F3385 F3396 F3407

15 F3309 F3320 F3331 F3342 F3353 F3364 F3375 F3386 F3397 F3408

20 F3310 F3321 F3332 F3343 F3354 F3365 F3376 F3387 F3398 F3409

Constructed from high quality connectors and 50/125 OM2 grade cable, eachpatch cord incorporates a short strain relief boot and is supplied with a test reportdetailing insertion loss. All patch cords are orange in colour, LSOH andindividually bagged and labelled.


33

03. Fibre Optics

FIBRE OPTIC PATCH CORDS SINGLEMODE 8/125 OS1

LENGTH ST-ST SC-SC ST-SC MTRJ-SC MTRJ-MTRJ LC-LC LC-SC LC-ST(METRE) DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX

1 F3001 F3011 F3021 F3031 F3041 F3051 F3061 F3071

2 F3002 F3012 F3022 F3032 F3042 F3052 F3062 F3072

3 F3003 F3013 F3023 F3033 F3043 F3053 F3063 F3073

5 F3004 F3014 F3024 F3034 F3044 F3054 F3064 F3074

Constructed from high quality connectors and 8/125 OS1 grade cable. Each patchcord incorporates a short strain relief boot and is supplied with a test reportdetailing insertion loss. All of the patch cords are yellow, LSOH and are individuallybagged and labelled.

Other sizes are available on request.

LENGTH FC-FC FC-SC FC-ST(METRE) DUPLEX DUPLEX DUPLEX

1 F3081 F3091 F3701

2 F3082 F3092 F3702

3 F3083 F3093 F3703

5 F3084 F3094 F3704

FIBRE OPTIC PATCH CORDS MULTIMODE 50/125 OM3

PRE-TERMINATED MULTICORE CABLE

LENGTH ST-ST SC-SC ST-SC MTRJ-MTRJ MTRJ-SC MTRJ-ST LC-LC LC-SC LC-ST(METRE) DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX DUPLEX

1 F3501 F3511 F3521 F3531 F3541 F3551 F3571 F3581 F3591

2 F3502 F3512 F3522 F3532 F3542 F3552 F3572 F3582 F3592

3 F3503 F3513 F3523 F3533 F3543 F3553 F3573 F3583 F3593

4 F3504 F3514 F3524 F3534 F3544 F3554 F3574 F3584 F3594

5 F3505 F3515 F3525 F3535 F3545 F3555 F3575 F3585 F3595

6 F3506 F3516 F3526 F3536 F3546 F3556 F3576 F3586 F3596

7 F3507 F3517 F3527 F3537 F3547 F3557 F3577 F3587 F3597

10 F3508 F3518 F3528 F3538 F3548 F3558 F3578 F3588 F3598

15 F3509 F3519 F3529 F3539 F3549 F3559 F3579 F3589 F3599

20 F3510 F3520 F3530 F3540 F3550 F3560 F3580 F3590 F3600

Constructed from high quality connectors and 50/125 OM3 grade cable, each patch cordincorporates a short strain relief boot and is supplied with a test report detailing insertionloss. All patch cords are orange in colour, LSOH and individually bagged and labelled.

Reduce on-site installation time by usinga pre-terminated, factory testedassembly which is fully protected andsuitable for pulling through cable ducts.It is assembled using high quality ST,SC, LC or MTRJ connectors andinternal/ external LSZH cable of yourchoice. You can choose from MultimodeOM1, OM2 and OM3 or SinglemodeOS1, loose tube or tight bufferedmulticore cables from 4 to 24 core,ruggedised 2 core oval duplex cable oreven loose tube corrugated steel tape. It is supplied on a cable drum ready forinstallation.


34

03. Fibre Optics

FIBRE OPTIC ADAPTORS

FIBRE OPTIC CONNECTORS

The STII and SC single piece connectors are designed for easy and quick termination on site. They are suitable for use on both LooseTube and Tight Buffered cable and can be used with cold cure termination system.

The SC Duplex Clip enables two SC Simplex Connectors to be joined to form a single SC Duplex Connector. The LC connectors areideal for high density applications due to their small size.

900μm pigtail and strain relief boots are included, yellow for Singlemode and black for Multimode. Highest quality ceramic ferrule.

CABLE TYPE STII SIMPLEX SC SIMPLEX SC DUPLEX LC SIMPLEX LC DUPLEX

SINGLEMODE F4000 F4004 F4007 F4010 F4014

MULTIMODE F4001 F4005 F4008 F4011 F4015

SC DUPLEX CLIPF4006

F4040 (A) ST-SC DUPLEX ADAPTOR

F4041 (B) ST STANDARD ADAPTOR, LOCKNUT AND BLACK ID RING

F4042 (B) ST SINGLEMODE BULKHEAD ADAPTOR

F4038 SC SIMPLEX ADAPTOR, MULTIMODE

F4043 (C) SC DUPLEX ADAPTOR, MULTIMODE

F4039 SC SIMPLEX ADAPTOR, SINGLEMODE

F4044 (C) SC DUPLEX ADAPTOR, SINGLEMODE

F4037 SC/APC SIMPLEX ADAPTOR, SINGLEMODE

F4036 SC/APC DUPLEX ADAPTOR, SINGLEMODE

F4045 (D) MTRJ DUPLEX ADAPTOR

F4046 (E) LC DUPLEX ADAPTOR, MULTIMODE

F4047 (E) LC DUPLEX ADAPTOR, SINGLEMODE

F4048 (F) FC MULTIMODE ADAPTOR

F4049 (F) FC SINGLEMODE ADAPTOR

Our range includes ST, SC, MTRJ and LC Adaptors.

• ST-SC Adaptors are used to connect cables or assemblies with different connectors. These can be used either in line or mounted in Patch Panels or Faceplates.

• ST-ST Adaptors are available in either Singlemode or Multimode types.

• SC Adaptors are available in Simplex and Duplex form, can be mounted in Panels or Wall Plates and are suitable for use with both Simplex and Duplex SC Connectors.Angle Polish (APC) style are now also available.

• MTRJ Adaptors are polymer bodied Through Couplers designed to house 1 Duplex MTRJ Connector. They are most suitable for Patch Panel, and Junction Box/ Deskapplications.

• LC Adaptors are Through Couplers with an RJ45 footprint. Designed to house 1 Duplex LC Connector.

• FC Adaptors are used to match cable or assemblies with different connectors, can be used either in-line or mounted in patch panels or faceplates.

A

BC

DE F


35

03. Fibre Optics

AMP LIGHTCRIMP ST/ SC CONNECTORS

AMP Lightcrimp ST/ SC Connectors are no-epoxy, no-polish connectors that can beterminated in less then a minute. Each connector is supplied with dust cap andstrain relief boot.

3M HOT MELT CONNECTORS & ACCESSORIES

The 3M Hot Melt Connectors have pre-radiused ceramic ferrules and are supplied pre-loaded with hot melt adhesive which is activated when inserted into a specifically designedHot Melt Oven. The hot melt adhesive does not have a shelf life. The ST and SC 3M Hot Melt Connectors are fully compatible with other ST/ SC connectors and are suitable for use with both 3mm tight jacket cables or 900μm buffered fibres. Various kits and tools are available. The Termination Kit contains all of the tools and consumables required for preparation and termination of Hot Melt Connectors. The ConversionKit is for users who already have fibre preparation tools and require additional equipment specific for Hot Melt termination.

CODE ACCESSORIES

F3861 HOT MELT TERMINATION KIT 230V

F3862 HOT MELT CONVERSION KIT 230V

F3863 HOT MELT LC EXPANSION KIT

F3864 HOT MELT CLASSIC CONSUMABLE KIT

F3865 HOT MELT LC MULTIMODE CONSUMABLES KIT

F3866 HOT MELT LC SINGLEMODE CONSUMABLES KIT

F3867 HOT MELT CONNECTER HOLDER ST

F3868 HOT MELT CONNECTER HOLDER SC

F3869 HOT MELT COOLING STAND

F3870 HOT MELT 2μM POLISHING FILM

F3871 HOT MELT ONE STEP POLISHING PAD

CODE CONNECTOR

F3850 ST MULTIMODE (BLACK BOOT)

F3851 ST MULTIMODE (RED BOOT)

F3852 ST SINGLEMODE (YELLOW BOOT)

F3853 SC SIMPLEX MULTIMODE (WHITE BOOT)

F3854 SC SIMPLEX SINGLEMODE (YELLOW BOOT)

F3855 LC SIMPLEX MULTIMODE 900μM (WHITE BOOT)

F3856 LC SIMPLEX MULTIMODE 1.6-2MM (WHITE BOOT)

F3857 LC DUPLEX MULTIMODE 900μM (WHITE/BEIGE BOOT)

F3858 LC DUPLEX MULTIMODE 1.6-2MM (WHITE/BEIGE BOOT)

F3859 LC SIMPLEX SINGLEMODE 900μM

F3815 CERAMIC ST CONNECTOR

F3816 POLYMER ST CONNECTOR

F3817 CERAMIC SC SIMPLEX CONNECTOR

F3818 CERAMIC SC DUPLEX CONNECTOR

AMP LIGHTCRIMP PLUS CONNECTORS

AMP Lightcrimp Plus Connectors are no-epoxy, no-polish connectors withconsistent crimp quality and long term high performance. Each connector issupplied pre polished and with a stub of terminated fibre. Fast and easytermination, no ovens, power, and polishing required.

CODE CONNECTOR CABLE

F3800 ST 62.5/125 OM1

F3801 ST 50/125 OM2

F3802 SC SIMPLEX 62.5/125 OM1

F3803 SC SIMPLEX 50/125 OM2

F3804 SC SIMPLEX 50/125 OM3

F3805 SC SIMPLEX 9/125 OS1

F3806 LC SIMPLEX 62.5/125 OM1

F3807 LC SIMPLEX 50/125 OM2

F3809 LC SIMPLEX 50/125 OM3

F3810 LC SIMPLEX 9/125 OS1

F3811 LC DUPLEX 62.5/125 OM1

F3812 LC DUPLEX 50/125 OM2

F3813 LC DUPLEX 50/125 OM3

F3814 LC DUPLEX 9/125 OS1


36

03. Fibre Optics

BLACK SLIDING DRAWER FIBRE OPTIC PATCH PANEL - PRE-LOADED

These 1U Fibre Optic Patch Panels are supplied with pre-configuredAdaptors for easy and quick installation. They are available inMultimode and Singlemode with choice of port density and havemultiple pre-stamped cable entry positions on rear.

SC, LC and MTRJ patch panels are supplied with pre-configuredduplex adaptors. LC and MTRJ adaptors are small type adaptors, accommodating atwo fibre connector, resulting in a high density solution.

Each Patch Panel includes:24 Way Splice Bridge2 x Cable Entry Glands4 x Self Adhesive Cable Management Ties4 x Cage Nut Fixing SetsBlanks for ports not used

MM = Multimode SM = Singlemode

NUMBER OF ST-MM ST-SM SC-MM SC-SM LC-MM LC-SM MTRJ-MM/SMCONNECTORS

4 F4070 F4075 --- --- --- --- ---

8 F4071 F4076 F4080 F4084 F4088 F4092 F4096

12 F4072 F4077 F4081 F4085 --- --- F4097

16 F4073 F4078 F4082 F4086 F4089 F4093 F4098

24 F4074 F4079 F4083 F4087 F4090 F4094 F4099

48 --- --- --- --- F4091 F4095 F4100

TAMPERPROOF PATCH BOX 4 PORT ST

The 4 Port Tamperproof Patch Boxes are finished in white enamel and are ideal forworkstation applications. They are supplied loaded with in-line ST Adaptors. There are2 designs for different cable entry options (32 x 16mm Trunking and 20mm Conduit).The 20mm cable entry version can also be used with a Cable Gland for securing cablein to the Patch Box.


F4130 PATCHBOX TAMPERPROOF 20MM CONDUIT

F4131 PATCHBOX TAMPERPROOF 32 X 16MM TRUNKING

FIBRE OPTIC INLINE ADAPTORS

Sometimes referred to as bulkhead adaptors or couplers, used to couple twoconnectors together, ie patch panels and terminated cable. They are normallyinstalled in wall boxes, patch panels and optical distribution frames.

F4050 ST PROSPHER BRONZE SLEEVE

F4051 ST CERAMIC INSERT

F4052 SC PROSPHER BRONZE SLEEVE

F4053 SC CERAMIC SLEEVE

F4054 FC CERAMIC SLEEVE

F4055 FC/PC METAL INSERT

F4056 SC/APC CERAMIC SLEEVE

BLANKING PLUGS

Used in part loaded Patch Panels.

STF4204

SC (DUPLEX)F4205


37

03. Fibre Optics

F4150 STANDARD WALL MOUNTED ENCLOSURE

F4151 COMPACT WALL MOUNTED ENCLOSURE

FIBRE OPTIC PATCH BOXES

These ST and SC Duplex Patch Boxes are suitable for wall, floor or desk mounting.Each unit has 20mm knockouts on all sides and is fitted out with in-line adaptors, 24way splice bridge, cable entry glands and 4 x self adhesive cable ties. Single piecebody construction eliminates fibre snagging.Each Adaptor on the SC Patch Box will accept 1 x SC Duplex Connector or 2 x SC Simplex Connectors.

FIBRE OPTIC WALL MOUNTED DOUBLE DOOR PATCH BOX

Designed for high density secure terminations, ensuringthat both the terminations and the patching are safe.These lockable patch boxes include a fitted AdaptorPlate loaded with the appropriate number of in-lineAdaptors, 24 way splice bridge, cable entry gland and 4 x self adhesive cable ties. All boxes have 20mmknockouts and pre-drilled fixing holes.ST and SC Duplex In-Line Adaptor Plates available.


F4170 12 PORT ST PATCH BOX

F4171 24 PORT ST PATCH BOX

F4172 6 PORT SC DUPLEX PATCH BOX

F4173 12 PORT SC DUPLEX PATCH BOX

FIBRE SPLICE BRIDGEF4200

An effective means of securing up to 12fusion and mechanical splices within aPatch Panel or enclosure. This compact12 way Splice Bridge can be fixed to anyflat clean surface using the self adhesivepads on the base.

NO. OF PORTS/ ST LOADED DIMENSIONS (MM)ADAPTORS

04 F4135 110 X 110 X 40

08 F4136 160 X 160 X 40

12 F4137 160 X 160 X 80

16 F4138 160 X 160 X 80

NO. OF PORTS SC DUPLEX DIMENSIONS (MM)LOADED

02 F4140 110 X 110 X 40

04 F4141 160 X 160 X 40

06 F4142 160 X 160 X 80

08 F4143 160 X 160 X 80

FIBRE OPTIC WALL MOUNTED SINGLE DOOR ENCLOSURE

These lockable enclosures provide a costeffective secure method of terminating fibre where standard 19” cabinets and patchpanels are not suitable. All enclosures aresupplied unloaded. Required Plates andAdaptors need to be added. A standard wall box includes SpliceManagement.

Size: 370 x 330 x 80mm

Size: 250 x 250 x 55mm

STANDARD ENCLOSURE COMPACT ENCLOSUREADAPTOR PLATES TO SUIT ABOVE ST SC ST SC WALL BOXES (DUPLEX) (DUPLEX)

4 X ADAPTOR PLATE F4155 F4157 ---

6 X ADAPTOR PLATE --- --- --- F4161

8 X ADAPTOR PLATE F4156 --- --- F4162

12 X ADAPTOR PLATE --- --- F4158 F4163

16 X ADAPTOR PLATE --- --- F4159 ---

24 X ADAPTOR PLATE --- --- F4160 ---

COMPATIBLE ADAPTOR F4164 F4165 F4164 F4165


38

03. Fibre Optics

SPLICE PROTECTIONSLEEVES

SPLICE PROTECTOR 40MMF4201

SPLICE PROTECTOR 60MMF4202

COLD CURE TERMINATION SYSTEMF4207

This is a room temperature, fast curingepoxy system used for terminating fibreinto connectors. The adhesive and theprimer are supplied in separatecontainers. The adhesive is injected intothe connector and the fibre is dipped inthe primer before inserting into theconnector. Once the primer and adhesivetouch the curing process begins and isfinished within a few seconds.

EPOTEK HEAT CURING EPOXYF4208

EPO-TEK 353ND is a two part heatcuring epoxy for terminating fibre intoconnectors. It is supplied in 4g bi-packto ensure the correct mixing ration ofresin and hardener. By removing theplastic divider the two can be mixedbefore loaded into the syringe. Its pot lifeis 4 hours. Cure time is 15 mins at 80°C, 5 mins at100°C or 2 mins at 120°C.

EPOXY SYRINGE & NEEDLE

3cc syringe with screw thread andneedle used to load connectors withepoxy during termination. The needledelivers epoxy to the rear of the ferrulewithout trapping air bubbles.

F4209 SYRINGE 3CC

F4210 NEEDLE 0.5. 20 GAUGE




DISPOSAL BIN

Used for disposal of unwanted fibrelengths, syringe needles and othersharps during the termination ofconnectors or the cleaving of fibres.

F4215 CINBIN 1 LITRE

F4216 CINBIN 10 LITRES

F4217 DISPOSAL BIN 645ML

POLISHING PUCK

Universal plastic polishing puckmanufactured from hard wearingengineering polymer, used to assist inensuring a clean accurate finish.

F4230 PUCK 2.5MM (ST, SC, FC)

F4231 PUCK 1.25MM (LC, MU)

F4232 PUCK MTRJ

LAPPING FILM

High quality lapping films used forpolishing connectors. Supplied in packsof 10 sheets. Size: 250 x 280mm

F4220 WHITE, 0.3μM

F4221 LIME GREEN, 1.0μM

F4222 DARK PINK, 3.0μM

F4223 BROWN, 5.0μM

F4224 BLUE, 9.0μM

F4225 YELLOW, 12.0μM

F4226 GREEN, 30.0μM

POLISHING PUCK STAINLESS STEEL

Universal high quality, stainless steelpolishing puck for most 2.5mm ferruleconnectors incl. ST, SC and FC.Aluminium disc for 1.25mm ferrule LCconnectors also available.

F4233 PUCK STAINLESS STEEL 2.5MM UNIVERSAL

F4234 PUCK ALUMINIUM 1.5MM (LC)


39

03. Fibre Optics

POLISHING KITF4228

Complete kit includes:-

Clear Lexan polishing plateNeoprene polishing padUniversal plastic polishing puckUniversal stainless steel polishing puck12μm polishing film (5x)3μm polishing film (5x)5μm polishing film (5x)Lint-free wipes (25x)Pre-saturated bifurcated swipes (10x)

W4030 200 x MAGNIFICATION

W4031 400 x MAGNIFICATION

IPAF4235

Isopropyl Alcohol fluid formulated withoutCFC’s for the safe removal of dust anddirt from fibres or connector ferrule faces.

IPA DISPENSERF4239

Polyethylene solvent dispenser with acapacity of 50cc of cleaning fluid.Complete with a stainless steellockable cap.

WIPES CLEANING DRYF4238

Non abrasive, dry lint free wipes used toclean fibre and connectors prior toinstallation. Supplied in box of 280.

LASER WARNING LABELF4240

Used to warn people of possible laserhazards from unprotected connectors oradaptors. Supplied in pack of 10.

PAD CLEANING NO.1F4236

An IPA based cleaning pad for use onelectronics components.

WIPES CLEANINGF4237

Non abrasive lint free wipes used toclean fibre and connectors prior toinstallation, pre-saturated with IPA.Supplied in packs of 80 sachets.

FIBRE OVENW4034

Molex curing oven with an integralcircular curing chamber, providinguniform heat distraction during epoxycuring of fibre optic connectors. Eachfixed curing temperature cavity isindependently controlled. Theautomatic sensor turns the cavity timeron when the connector is inserted. AnLED and buzzer will indicate whichconnector has reached the end of thecuring process. The oven is suppliedwith an AC power cord, cable supportand six protection tubes.

FIBRE INSPECTION MICROSCOPE

Available in 200x or 400x magnificationsFeatures:• Focus wheel for proper focus• Universal adaptor for nearly all ST,

SC and FC connector ferrulesincluded (others available)

• Integrated laser safety filters• Illumination LED light giving 100,000

hour life• Side illumination port for back lit

inspection of jumpers, can be usedas a fault finder

• Supplied in soft padded storage caseincluding 3 x AAA batteries

Length: 230mm

For fibre tools, goto page 111-113

For fibre testers, goto page 63-69


40

03. Fibre Optics

FIBRE CLEAVER CT30F4300

SPLICE MATE FUSION SPLICERS

The SpliceMate™ is the world’s smallest and most portable fusionsplicer, small enough to fit in the palm of your hand but smart andreliable enough to be used with confidence by inexperiencedoperators.

Features:• Highly portable and ideal for FTTH/FTTP solutions • Highly functional & performance specifications • Typical 60 second splice/heat cycle • Available as single fibre or 4 fibre ribbon version • Reliable results, intelligent splicing • Dual Camera Inspection • 3.5” colour LCD monitor• Auto Arc Calibration • Full AC/DC power options available • Supplied complete with battery pack, battery charger, AC

adaptor, AC power cord, fibre holder, carrying case, spareelectrodes, instruction manual

• Work station and carrying strap available

Specification:

Model Splice Mate FSM-11S: Single Fibre SplicerSplice Mate FSM-11R: Mass Fibre Splicer

Fibre Count FSM-11S: Single, FSM-11R: Single, 2, 4Cladding Diameter 125μmCoating Diameter 250 and 900μmSplicing Time FSM-11S 15 seconds, FSM-11R 20seconds Dimensions 110 x 100 x 80mmWeight 810g with battery pack

F4305 SINGLE FIBRE SPLICER FSM-11S

F4306 MASS FIBRE SPLICER FSM-11R

High Precision Fibre Cleaver CT-30 has been designed for up to 12 fibre cleaving.

Features:• Small size, lightweight, and easy handling • Applicable up to 12-fibre ribbon cleaving • Fibre collector equipped as standard • 2-action operation including fibre scrap collection • Operation: Push back blade -> Set fibre -> Close body • Blade speed and anvil speed are mechanically controlled • Blade is common to CT-20 series cleavers

Specification:

Applicable Fibres Silica optical fibreBare Fibre Diameter 125μmCleaving Angle 0.5 degrees at single fibreBlade Positions 3 height and 16 rotating positionsBlade Life 48,000 fibres

(1,000 fibres x 3 height x 16 positions)Dimensions 69 (W) x 82 (D) x 41 (H) mmWeight 180g


41

03. Fibre Optics

SINGLE FIBRE FUSION SPLICER 18SF4307

Features:

• Highly durable – designed for tough environments • Suitable for single fibre splicing • Cladding alignment with fixed V-groove • Auto-start tube heater • Optional fibre clamping methods • Splice image capture facility • Software upgrade via Internet • Includes multi-function worktable

Suitable for use with SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)

Specification:Fibre Count SingleCladding Diameter 125μmCoating Diameter 100 to 1000μmSplicing Time 11 seconds with standard SM fibreDimensions 136(W) x 161(D) x 143(H)mmWeight 2.1kg

Supplied complete with:• Arc Fusion Splicer• Sheath Clamp• Electrodes (spare too)• Wind Protector Mirror• AC Adaptor, Battery Charger, USB Cable • AC Power Cord• Video Instruction Manual & Guide• Warning & Cautions• Splicing Report• J-Plate • Carrying case• Optional Extras available

OPTICAL FIBRE FUSION SPLICER FSM 60SF4308

Features:

• Highly durable – designed for tough environments • World’s most compact & lightest of its class • Core alignment with auto-fibre identification (PAS) • 9 sec. splice time & 30 sec. tube-heat time • Auto-start tube heater • Optional fibre clamping methods • Splice image capture facility • Software upgrade via Internet • Includes multi-function worktable Suitable for use with SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) and other SMF including ITU-T G.657 fibres.

Specification:

Fibre Count SingleCladding Diameter 80 - 150μmCoating Diameter 100 to 1000μmSplicing Time 9 seconds with standard SM fibreDimensions 136(W) x 161(D) x 143(H)mmWeight 2.3kg

Supplied complete with:• Arc Fusion Splicer• Sheath Clamp• Electrodes (spare too)• Wind Protector Mirror• AC Adaptor, Battery Charger, USB Cable • AC Power Cord• Video Instruction Manual & Guide• Warning & Cautions• Splicing Report• J-Plate • Carrying case



Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


04. Coax Cables

Plugs

Sockets

U Links

Adapters

Patch Panels

Mounting Blocks

Accessories

4 coax cable a-w 12/8/09 11:39 Page 1

44

04. Coax

75 Ohm coaxial cable manufactured to CW1229Cspecification. Supplied on 100 or 500 metre reels.

Inner Conductor 7/0.2mmDialetric 2.45mm Cellular PolyethyleneScreen 1 3.10mmScreen 2 3.75mmSheath 5.1mm PVC TM1 WhiteAttenuation @ 5 mhz 4.0 db/100m maximum,3.0db/100m nominal

COAXIAL CABLE 2002

X1001 2002 100 METRES

X1002 2002 500 METRES

75 Ohm coaxial cable manufactured to CW1229Cspecification. Supplied on 100, 250 or 500 metre reels. Available in single core and 4 core version.

Inner Conductor 0.61mmDialetric 3.70mm PolyethyleneScreen 1 4.38mmScreen 2 5.05mmSheath 5.05mm PVC TM1 WhiteAttenuation @ 60 mhz 9.0 db/100m Attenuation @ 5 mhz 2.6 db/100m maximum

COAXIAL CABLE 2003

X1005 2003 SINGLE CORE 100M



X1008 2003 4 CORE 100M

X1009 2003 4 CORE 250M

X1010 2003 4 CORE 500M

75 ohm coaxial cable manufactured to CW1383Aspecification. Supplied on 100, 250 & 500 metre reels. Available in single core, 8 core and 16 core.

Inner Conductor 0.31mmDialetric 1.95mm PolyethyleneScreen 1 2.35mmScreen 2 2.75mmSheath 3.55mm PVC TM1 White Attenuation @ 5mhz 4.8 db/100m maximumNominal Capacitance 58PF/m, 67PF/m

COAXIAL CABLE 3002




X1023 3002 8 CORE 100M

X1024 3002 8 CORE 250M

X1025 3002 8 CORE 500M

X1026 3002 16 CORE 100M

X1027 3002 16 CORE 250M

X1028 3002 16 CORE 500M

75 ohm coaxial cable manufactured to CW1383Aspecification. Supplied on 100, 250 & 500 metre reels. Available in single core, 8 core and 16 core.

Inner Conductor 0.31mmDialetric 1.95mm PolyethyleneScreen 1 2.35mmScreen 2 2.75mmSheath 3.55mm PVC TM1 BlackAttenuation @ 5mhz 4.8 db/100m maximumNominal Capacitance 58PF/m, 67PF/m

COAXIAL CABLE TZC

X1030 TZC SINGLE CORE 100M



X1033 TZC 8 CORE 100M







45

04. Coax

75 ohm coaxial cable manufactured to CW1229specification. Ideal for high density voice over IPapplications. Less than half that cross section area ofBT2003. Available in single core, 8 core and 16 core.Supplied on 500 metre reels.

Inner Conductor 0.61mmDialetric 2.80mm PolyethyleneScreen 1 2.90mmScreen 2 3.40mmSheath 4.50mm PVC TM1 White Attenuation @ 5mhz 2.88 db/100mNominal Capacitance 56PF/m

COAXIAL CABLE RA7000

X1045 RA7000 SINGLE CORE 500M

X1046 RA7000 8 CORE 500M

X1047 RA7000 16 CORE 500M

75 ohm coaxial cable manufactured to MIL-C-17Gspecification. Available in Single core, 8 core and 16core version.

Inner Conductor 0.30mm Copper Clad SteelScreen 1 2.05mmSheath 2.54mm FEP (Teflon 100) Attenuation @ 4mhz 8.0 db/100mAttenuation @ 78mhz 29.9 db/100mNominal Capacitance 75PF/m

COAXIAL CABLE RG179

X1060 RG179 SINGLE CORE 500M

X1061 RG179 8 CORE 500M

X1062 RG179 16 CORE 500M

Coaxial Cable CT10075 Ohm Coaxial Cable suitable for use on BroadbandSatellite and TV Transmission systems. Supplied inaccordance with specification BSEN 50117.

Coaxial Cable RG5850 Ohm Coaxial Cable used extensively in RadioFrequency and Electronic Engineering Industries.Supplied in accordance with specification MIL-C-17.

Coaxial Cable RG5975 Ohm Coaxial Cable used extensively in RadioFrequency and Electronic Engineering Industries.Supplied in accordance with specification MIL-C-17.

COAXIAL CABLE CT100, RG58 & RG59

X1055 COAXIAL CABLE CT100

X1056 COAXIAL CABLE RG58

X1057 COAXIAL CABLE RG59

For coax tools, goto page 114-118


46

04. Coax

White collar Standard (not HighDensity) plugs used for crimping on tovarious type cables.

COAXIAL PLUGS TYPE 43 STANDARD

X2020 43/2 GTIS LD BT2002

X2025 43/3 GTIS LD BT2003

X2030 43/4 GTIS LD RG179

X2035 43/5 GTIS LD BT3002/ TZC

X2040 43/7 GTIS LD RA7000

Blue collar High Density plugs used forcrimping on to various type cables.

COAXIAL PLUGS TYPE 43 HIGH DENSITY

X2021 43/2 GTIS HD BT2002

X2026 43/3 GTIS HD BT2003

X2031 43/4 GTIS HD RG179

X2036 43/5 GTIS HD BT3002/ TZC

X2041 43/7 GTIS HD RA7000

Standard (QT) Quick Termination Plugs.

COAXIAL PLUGS TYPE 43 QT STANDARD

X2023 43/2 GTI LD QT ITT BT2002

X2028 43/3 GTI LD QT ITT BT2003

X2033 43/4 GTI LD QT ITT RG179

X2038 43/5 GTI LD QT ITT BT3002/ TZC

X2043 43/7 GTI LD QT ITT RA7000

High Density QT (Quick Termination)Plugs.

COAXIAL PLUGS TYPE 43 QT HIGH DENSITY

X2024 43/2 GTI HD QT ITT BT2002

X2029 43/3 GTI HD QT ITT BT2003

X2034 43/4 GTI HD QT ITT BTRG179

X2039 43/5 GTI HD QT ITT BT3002/ TZC

X2044 43/7 GTI HD QT ITT RA7000

Purple collar Ultra High Density plugsused for crimping on to various typecables.

COAXIAL PLUGS TYPE 43 ULTRA HIGH DENSITY

X2022 43/2 GTIS UHD BT2002

X3027 43/3 GTIS UHD BT2003

X2032 43/4 GTIS UHD RG179

X2037 43/5 GTIS UHD BT3002/ TZC

X2042 43/8 GTIS UHD RA8000

COAXIAL STRAIGHT PLUGS 1.0/2.3

X4050 PLUG STRAIGHT 1.0/2.3 2003 BT2003

X4051 PLUG STRAIGHT 1.0/2.3 RG179 RG179

X4052 PLUG STRAIGHT 1.0/2.3 3002/ TZC BT3002/ TZC

X4053 PLUG STRAIGHT 1.0/2.3 RA7000 RA7000

COAXIAL RIGHT ANGLE PLUGS 1.0/2.3

X4056 PLUG R/A 1.0/2.3 2003 BT2003

X4057 PLUG R/A 1.0/2.3 RG179 RG179

X4058 PLUG R/A 1.0/2.3 3002/TZC BT3002/ TZC

X4059 PLUG R/A 1.0/2.3 RA7000 RA7000For coax tools, goto page 114-118


47

04. Coax

COAXIAL BNC PLUGS

X4030 BNC PLUG 2002 BT2002

X4031 BNC PLUG 2003 BT2003

X4032 BNC PLUG RG179 RG179

X4033 BNC PLUG 3002/TZC BT3002/ TZC

X4034 BNC PLUG RA7000 RA7000

X4035 BNC PLUG RG59 RG59

BNC Female To Female Adapter.

BNC ADAPTERX4047

BNC Female to Female InsulatedBulkhead Adapter.

BNC BULKHEADADAPTER

X4048

COAXIAL PLUGS STRAIGHT 1.6/5.6

BNC plugs for use on various cabletypes.

COAXIAL PLUG TYPE 54 STRAIGHT

X4062 PLUG 54 STRAIGHT 2003 BT2003

X4063 PLUG 54 STRAIGHT 3002/TZC BT3002/ TZC

X4064 PLUG 54 STRAIGHT RA7000 RA7000

X4065 PLUG 54 STRAIGHT RA8000 RA8000

COAXIAL PLUG TYPE 54 RIGHT ANGLE

X4068 PLUG 54 R/A 2003 BT2003

X4069 PLUG 54 R/A 3002/TZC BT3002/ TZC

X4070 PLUG 54 R/A RA7000 RA7000

X4071 PLUG 54 R/A RA8000 RA8000

X4082 STRAIGHT PLUG 1.6/5.6 2003 BT2003

X4083 STRAIGHT PLUG 1.6/5.6 3002/ TZC BT3002/ TZC

X4084 STRAIGHT PLUG 1.6/5.6 RA7000 RA7000

X4085 STRAIGHT PLUG 1.6/5.6 RA8000 RA8000

X4074 SMB PLUG STRAIGHT RG179 RG179X4075 SMB PLUG STRAIGHT 3002 BT3002

COAXIAL PLUGS SMB STRAIGHT

X4078 SMB PLUG R/A RG179 RG179

X4079 SMB PLUG R/A 3002 BT3002

COAXIAL PLUGS SMB RIGHT ANGLE

COAXIAL STRAIGHT BULKHEAD JACK 1.6/5.6

X4088 STRAIGHT JACK 1.6/5.6 2003 BT2003

X4089 STRAIGHT JACK 1.6/5.6 3002/TZC BT3002/ TZC

X4090 STRAIGHT JACK 1.6/5.6 RA7000 RA7000

X4091 STRAIGHT JACK 1.6/5.6 RA8000 RA8000


48

04. Coax

COAXIAL BNC SOCKETS

X4040 BNC SOCKET 2002 BT2002

X4041 BNC SOCKET 2003 BT2003

X4042 BNC SOCKET RG179 RG179

X4043 BNC SOCKET 3002/TZC BT3002/ TZC

X4044 BNC SOCKET RA7000 RA7000

X4045 BNC SOCKET RG59 RG59

BNC Sockets for useon various cable types.

Standard (not High Density) socketsfor crimping on to various type cables.

COAXIAL SOCKETS TYPE 43 STANDARD

X3020 43/2 FS BT2002

X3025 43/3 FS BT2003

X3029 43/4 FS RG179

X3034 43/5 FS BT3002/ TZC

X3039 43/8 FS RA8000

High Density sockets for crimping onto various type cables.

COAXIAL SOCKETS TYPE 43 HIGH DENSITY

X3021 43/2 FS HD BT2002

X3026 43/3 FS HD BT2003

X3030 43/4 FS HD RG179

X3035 43/5 FS HD BT3002/ TZC

X3040 43/8 FS HD RA8000

Standard Quick Termination (QT)Sockets.

COAXIAL SOCKETS TYPE 43 QT STANDARD

X3022 43/2F LD QT ITT BT2002

X3027 43/3F LD QT ITT BT2003

X3032 43/4F LD QT ITT RG179

X3037 43/5F LD QT ITT BT3002/ TZC

X3041 43/8F LD QT ITT RA8000

High Density Quick Termination (QT)Sockets.

COAXIAL SOCKETS TYPE 43 QT HIGH DENSITY

X3023 43/2F HD QT ITT BT2002

X3028 43/3F HD QT ITT BT2003

X3033 43/4F HD QT ITT RG179

X3038 43/5F HD QT ITT BT3002/ TZC

X3042 43/8F HD QT ITT RA8000

Ultra High Density sockets for crimpingon to various type cables.

COAXIAL SOCKETS TYPE 43 UHD

X3031 43/4 FS UHD RG179

X3036 43/5 FS UHD BT3002/ TZC

Standard (LD) right angle sockets forcrimping on to various type cables.

COAXIAL SOCKETS TYPE 43 RIGHT ANGLE

X3045 43/2C BT2002

X3046 43/3C BT2003

X3047 43/5C BT3002/ TZC


49

HANGING IDENTI-FICATION FLAG KIT

04. Coax

BNC PATCH PANEL19”

X6030 8 WAY

X6031 16 WAY

X6032 24 WAY

X6033 32 WAY

BNC PATCH PANELS19” FULLY LOADED

X6034 8 WAY LOADED

X6035 16 WAY LOADED

X6036 24 WAY LOADED

X6037 32 WAY LOADED

MOUNTING BLOCKS X6003IDENTIFICATIONLABELS

X6004 LABEL FOR B4 BLOCK

X6005 LABEL FOR B2 BLOCK

X6006 CLEAR PLASTICLABEL COVER

DDF 6 BLOCK PANELHD RECESSED

X6010 BLUE

X6011 GREY

SPIGOTS X6007

Mounting Blocks suitablefor use on both DDFframes and 19” panels.

Used for holding label & cover to B4 - B2 Blocks.

Supplied in blue or grey colour.

BLOCK PANELS HIGHDENSITY

X6015 5 WAY BLOCK PANEL

X6016 6 WAY BLOCK PANEL

19” high density type 43 block panelssupplied with cable management.

ADAPTOR PLATES 1U 19”

X6018

X6000 B4 BLOCK 24 PORT BLOCK FOR STANDARD TYPE 43 PLUGS

X6001 B2 BLOCK 32 PORT BLOCK FOR HIGH DENSITY TYPE 43 PLUGS

X6002 B1 BLOCK 64 PORT BLOCK FOR ULTRA HIGH DENSITY TYPE 43 PLUGS

U LINKS 13A & 13BSTANDARD

X4010 U LINK 13A

X4012 U LINK 13B

Standard (not High Density) U Links for type 43Connectors. U Link 13B has a Monitor Point.

U LINKS 10A & 10B HIGH DENSITY

X4004 U LINKS 10A

X4006 U LINKS 10B

High Density U Links for type 43 Connectors. U Link 10B has a Monitor Point.

U LINKS 9A & 9B ULTRA HIGH DENSITY

X4000 U LINKS 9A

X4001 U LINKS 9B

Ultra High Density U Links for type 43 Connectors. U Link 9B has a Monitor Point.

TESTER 430A X6050

Small LED signal tester for use onDDF’s.



Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


05. Test Equipment Test Telephones

Cable Tracing

Multimeters

TDR s

Cable Fault Locating

Insulation & Continuity

C.A.T. & Genny

Test Adaptors

Cords Connecting

Fibre Testers

5 test 14/8/09 17:16 Page 1

52

05. Test Equipment

TEST TELEPHONE 295A

The Teletronics Test Telephone 295A isdesigned for installation professionalsworking on hard wired communicationsat remote locations or line testing. Thisunit can be used for two-waycommunications and provides all testfunctions normally required for standardlines. Manufactured to meet BS6301,BS6305, BS6317, BS2011 and BS6527for class B radiated RF emissions,S1710 for conducted and radiated RFsusceptibility and IEC801-2 forelectronic discharge.

Features:

• DTMF/ pulse dialling• Polarity LED test• Talk/ monitor switch• High importance monitor mode• Ten number speed dial memory• Flash (DIS) button• Audible ring indication• Mute button• Redial button

Q2001 TEST TELEPHONE 295A (431A PLUG)

Q2002 TEST TELEPHONE 295A (RJ11 PLUG)

TESTER 132J

This tester manufactured by TeletronicsLtd is used typically by two engineers toidentify the termination point and/orpath of metallic wiring over significantseparation distances and depths. It canbe additionally used for continuity andpolarity checks.

A standard test kit consists of: • Amplifier 109J• Oscillator 87J• Cord Connect 2/26A• Adaptor Test 49A• Receiver Headset 17A• Receiver Headset 18A• Carrying Case

All parts can be ordered separately.

Q2008 TESTER 132J (COMPLETE SET)

Q2009 A - AMPLIFIER 109J

Q2010 B - OSCILLATOR 87J

Q2048 C - HEADSET 17A (FOR USE WITHOUT SAFETY HELMET)

Q2049 D - HEADSET 18A (FOR USE WITH SAFETY HELMET)

Q2037 E - CORD CONNECT 2/26A

Q2054 F - ADAPTOR TEST 49A

Q2011 G - CARRYING CASE

TEST TELEPHONE 300A

Test Telephone 300A incorporatesall the features of the TestTelephone 295A, but has theadded benefit of a hands-freefacility. When used in conjunctionwith Headset 7A the integral beltclip at the base of the phoneenables the user to operatehands-free, whilst at the same

time receive enhanced claritythrough the headset. The TestTelephone 300A gives the userthe added option of use as astandard test telephone by meansof an integral switch.

Q2003 TEST TELEPHONE 300A (431A PLUG)

Q2004 TEST TELEPHONE 300A (RJ11 PLUG)

Q2047 HEADSET 7ADIGALERT 350Q2007

Designed specifically to preventNetwork Intervention - easing theevolution from the old analogue to adigital network, incorporating DigAlert™technology and high fidelity. Hands-free operation delivers unmatched networkand user safety benefits.

Features: • Loudspeaker listening• Volume boost• LED Mode Indication• DigAlert Digital Lockout & Alarm • DigAlert High Voltage Lockout & Alarm• Proof tested to IP67• Microphone mute• Battery low audible tone• Tone/Pulse• Redial (10 x 24 memories)• Selectable ringer tones • Super Hi Impedance Polarity• Super Hi Impedance Monitor• Warble ringer• High impact resistance• Rugged belt clip• 3-Year Warranty

TEST TELEPHONE PE830 Q2006

The PE830 is a complete butt-in set. Itcan also be used with the standardheadset included and with the amplifiedloudspeaker line monitor.

Features:• Complete telephone set with ringer• Phone-to-phone intercom• LCD Display in English, Spanish

or French• Caller ID and call waiting Caller ID display• Missed call indication• Line voltage and current display• High voltage/ current detect and lockout• Amplified loudspeaker line monitor• Tone and pulse dialling• Large 10-location speed dialling memory• Multi-memory redial

B A

E

F

GD

C

5 test 14/8/09 17:16 Page 2

53

05. Test Equipment

CABLE TRACING KIT AM4/TG4

Q2012 CABLE TRACING KIT AM4/TG4 (431A PLUG)

Q2013 CABLE TRACING KIT AM4/TG4 (RJ11 PLUG)

Q2014 INDUCTIVE PROBE AMPLIFIER AM4

Q2015 TONE GENERATOR TG4

Q2016 CARRYING CASE

DIGALERT PROBE 1BQ2018

Originally designed to test the network forthe presence of digital circuits DigAlertProbe allows technicians to quicklyestablish in jointing boxes, cabinets andracks if a pair is active prior to anymaintenance action. It will directlyreproduce audio signals, such as speech,base-band modems or fax tones and willoutput a distinctive two tone alarm if high-frequency signals are present.

Features:• DigAlert Technology• 3 Year Warranty • Micro controlled • Key press timing • Large speaker• Battery-low warning • Auto shut off • Sealed electronics & battery• Water, Dust & Crush proof • Chemical resistant • Breathes & Floats

TESTER SA9083Q2020

The Teletronics SA9083 is a battery powered, multi-range,analogue portable instrument. It is primarily intended for useby faultsmen for maintenance testing of telecommunicationlines and equipment, subscribers installations connected toexchanges where faultsmen do not have access to a testdesk, or where the testing equipment at the local exchange isnot staffed during normal working hours. It has three inputterminals, a range selector switch and a dual purpose push-button reversing switch (B-A changeover/test cell). It is supplied complete with arobust carrying case and set of test leads and probes.

TONE PROBE 510J Q2019

• 3 Year Warranty • Micro controlled • Filter options • Key press timing • Confirmation tones • Battery-low warning • Auto shut off • Headset connection • Sealed electronics & battery• Large high output speaker • One button control • Crush proof • Chemical resistant • Breathes & Floats• Metal Tip

TONE TRACER KIT 500J/ 600JQ2017

The Teletronics new improved CableTracing Kit AM4/TG4 is used typicallyby an engineer working alone to identifythe termination point and/ or path ofmetallic wiring over much shorterdistances and shallower locations thanwith the Tester 132J. The cable tracingkit can perform continuity and polaritychecks. The AM4 gives both an audioand visual indication on wires identified.The complete kit comprises a ToneGenerator (TG4), an Inductive ProbeAmplifier (AM4) and a carrying case.All parts can also be orderedseparately. An RJ11 or other plugs canbe fitted on request.

Tone Probe 500J Features:• Large powerful speaker• One button operation• Headset option• Micro controlled key press timing

Tone Generator 600J Features:• Balanced 1kHz sine wave output• Continuity test• High tone output• Transformer coupled output – DC Path• Capacitor coupled output – No DC Path• One button operation

Both items are fully water/ dust and crush proof and have a 3 year warranty.

Q2021 LEADS FOR SA9083

5 test 14/8/09 17:16 Page 3

54

05. Test Equipment

MANOMETER 1CQ3001

Used for accurate reading of pressure systems. The main functionof the Manometer 1C is to take precise pressure readings of airfilled telephone cables. Based on a piezoresistive sensor completewith its own laser trimmed temperature compensation, thismanometer brings the user an excellence in pressure monitoring.With only two controls on the front, the operation of the manometeris simple, quick and requires no setting time. The read-out isavailable in mbars, psi and kPs and can be supplied in a series ofoperating ranges. The manometer comes complete with a neckstrap and punch which houses, a quick connect chuck and 1.5meters of PVC connecting tube.

THROWMASTER 102AMQ3002

The Throwmaster brand cable test set model 102A is a portable,battery powered instrument intended for field testing telephone cablepairs. It is normally used by cable technicians as their primary test set.

Features:• Tests non-working pairs for all DC defects including opens, shorts,

crosses, grounds, splits, balance and high resistance faults• Tests working pairs for busy status, polarity and voltage• Measures resistance from 0 to 10 megahoms• Locates opens, shorts, grounds, crosses and splits• Supplies talk battery and signalling functions for technician

communication• Sends simplex 577 HZ tone for pair identification which is silent to

subscribers• Performs cut closed cable transfers or section throws on working

cables without service interruption• The unit is powered by 6 x 9v batteries (MN1604)

TDR TV220 CATVQ3005

Features:• Excellent for Digital Services Provisioning • Easy to Use – no training required• Testing at Higher Bandwidth• High signal-to-noise ratio (SNR) • TestWizardTM - One-button Testing • Helps to Solve Tough Problems • Automatic Return Loss Measurements • Automatic Multiple Event Marking • High-resolution, Short Pulse Width (1 ns) • Withstands a Two Meter Drop • Large, Backlit, High-resolution Display (640 X 440), 7.2 in. Diagonal • Internal Memory for 20 Waveforms and Notes Dimensions: 240(h) x 300(w) x 90(d)mmWeight: 4kg

Full specification available at request.

Includes: BNC-to-Alligator Clips Test Leads, 2 m Coaxial Jumper Cable, F-to-BNC BarrelAdapter, F-to-F Barrel Adapter, F-Type to KS Test Adapter, Soft Carrying Case withShoulder Strap, AC Adapter/Charger (120 VAC, 60 Hz, 9 V @ 1 A), DC CigaretteLighter Adapter Cable, User Manual, Quick Reference Card, Rechargeable InternalBattery.

This leading edge TDR can test more system bandwidth and expose faults that havebeen previously invisible to TDR yet still impairment to digital signals. The TV220 alsointroduces one-button testing.

5 test 14/8/09 17:16 Page 4

55

05. Test Equipment

HARRIER ISDN TEST SETQ3003

Features:• PC or Hand Held Operation • Automatic Access Detection • Voice Announcement • Telephony Button • Signal Level Measurement • POTS DTMF Monitor • Accumulator or Battery Operation • BRI Powering Option • Automatic Testing Scripts• BRI, U and POTS interfaces in TE mode • CLIP function on POTS Accesses • One key voltage and signal level

measurement • Handset automatic test mode • Automatic storage of results • Configuration data file system • Backlight 4 Line LCD • Comprehensive service testing • User selectable language • Simulation of X.31(D) terminal to X.25

network • Measurement of round trip delay and

inter-channel delay

Full specifications can be provided atrequest.

TX2002 TDR/ TONERQ3006

The TX2002 is a professional Time Domain Reflectometerand Toner designed to detect and locate faults on coppercommunication cables up to a distance of 3500m (11,500ft).

Advanced signal processing techniques enable the TX2002 tofind open, short circuits, splices, taps, water ingress and othermore exclusive impedance mismatches. A built in oscillatoralso provides a tone for pair tracing and identification.

TX2002 can be used to test all communication cablesincluding twisted pair and coaxial, with graphical results andfault distance displayed on a backlit 64 x 128 pixel LCD.

Features:• Lowest cost full specification professional graphical TDR• Rugged palm-top design • 50, 75 & 100 Ohm selectable cable impedance• 5 measurement ranges up to 3500 metres• Built in tone generator for pair tracing and identification• Suitable for testing all communication cables• Water and dust proof to IP54• Complete with tool-belt holster and test leads• Requires 4 x AA batteries

Dimensions: 165 x 90 x 37mmWeight: 350g

TX2003 TDR/ TONERQ3007

The TX2003 is a professional Time Domain Reflectometerwhich provides accurate and easy to read fault locations onmetallic cables up to 6000m (19,000ft).

With a 3 nano second pulse rise time "near end" cable faultscan be clearly identified without the need to suppress thetransmitted pulse. Using pre determined gain and pulsewidths for each range setting and with only 4 control buttons,all major operating and setting parameters can be easilyaccessed. A 6km cable run can be scanned in seconds,allowing the operator a view of the cable run. Faulty cables may be traced using the TX2003 warble tonefeature, an oscillating tone is injected into the suspect poweror transmission line and by using Teletronics Inductive ProbeAmplifier AM4 the suspect line can be identified.

Features:• Rugged palm-top design • 25, 50, 75 & 100 Ohm selectable cable impedance• 11 measurement ranges up to 6000 metres• Battery life: 60 hours continuous scanning • Scratch resistant backlight 128 x 64 pixel display• Scan Lock facility enables continuous scanning or closer

analysis• Water and dust proof to IP54• Complete with tool-belt holster and test leads• Requires 4 x AA batteries


The new NG Harrier is a two part test system that overcomes thecomplexity associated with installing commissioning andmaintaining ISDN circuits. The PC software component commandsthe hand held test instrument to comprehensively test an ISDNinstallation and store the results. The hand held component canoperate independently of the PC to allow quick verification of theU-Interface, S/T-Interface, and derived POTS interface. Standard kit includes:PC software CD including User DocumentationQuick Reference GuideSerial Cable (9-pin D type to RJ45)Hand Held TesterRechargeable NiMH batteriesPlug-in power supplyRJ-45-BRI connection cableU/POTS interface connection cableCarry bag

5 test 14/8/09 17:16 Page 5

56

05. Test Equipment

FAULTCASTERQ3008

The FaultCaster™ is a palm-top Digital Time DomainReflectometer designed to detect and locate faults on alltypes of copper cable up to a distance of 2000m (6,000ft).

Fast-Edge Step TDR technology enable the FaultCaster™ toidentify opens and short circuits, and directly indicate the faultdistance on an alpha-numeric LCD, with better range andresolution than existing products.

An internal library of standard cable types enables accuratemeasurements on cables without the necessity of enteringVelocity Factor information.

In the event that the FaultCaster™ is connected to a livecable a warning will be displayed, and alarm tone soundedand testing inhibited.

The FaultCaster™ is designed and manufactured tointernational standards for quality, safety and reliability.

Features:• High Resolution and Long Range in one TDR• Rugged palm-top design • Graphical LCD display• Built in tone generator for pair tracing and identification• Suitable for detecting fault on all copper cables• Water and dust proof to IP54• Complete with tool-belt holster and test leads• Requires 4 x AA batteries


LANCASTERQ3009

The LanCaster™ is a professional Structured Cabling Tester andTrouble Shooter designed to speed up the on-site testing of dataand voice networks, and the production testing of cableassemblies. It is designed and manufactured to internationalstandards for quality, safety and reliability.The LanCaster™ identifies all common faults, including split pairs,on wiring schemes installed to TIA568 A/B, USOC and ISDNstandards. In addition to this the LanCaster™ can inform the userwhich end of the installed link contains certain types of fault,enabling rapid location and correction.Before checking an installed wiring network, the LanCaster™ willalert the operator if any telephone services are active on the cableunder test and can test for, and indicate, any other active services(10Mb/s, 100Mb/s, Token Ring, etc), to prevent accidental testing ofa live network.The LanCaster™ also measures the length of cable or link undertest, and has a built in tone generator, detectable with a standard

probe, for cable tracing and identification.The LanCaster™ is supplied complete with 1 active remote officeidentifier and a further 15 are available as optional accessories,used to identify different radial circuits at the network hub.

Features:• Indicates which end of the cable contains the fault• Suitable for UTP & STP cables• Measures up to 150 metres (500ft)• Rugged palm-top design • Built in tone generator for pair tracing and identification• Water and dust proof to IP54• Complete with test leads• Requires 4 x AA batteries


LANCASTER PRO-STQ3010

The new LanCaster Pro-ST is a low cost wire map tester which tests andcertifies structured cabling continuity to a TIA568A/B, USOC and ISDNstandards. It displays on screen wiring configurations showing the length ofall 4 pairs and length of pair to a fault up to 150m (500ft).The LanCaster Pro-ST will store up to 1000 test results which can be viewedor be downloaded to a PC via the LanCaster Pro-ST software (provided) andthen customised with your corporate identity and certificates produceddisplaying the customer's location/job, length, cable VP and testing standard.Maintaining all the proven features of the LanCaster, it identifies all commonfaults on wiring schemes, including open circuit wires, shorted pairs, shortsbetween pairs, crossed pairs, split pairs, pair reversals and shield/ screencontinuity. In addition the LanCaster Pro-ST has a large backlit screen.As with the standard LanCaster, the LanCaster Pro-ST can check installedwiring networks, alerting the operator if any telephone services are active onthe cable test and can test for and indicate any other active services (10mb/s,100mb/s, token ring etc.) to prevent accidental testing of a live network. Inaddition, a built in tone generator (oscillator) transmits a warble tone into the

cable enabling detection and tracing using a standard probe.The Pro-ST comes complete with one intelligent remote office identifier, witha further 15 units available as optional accessories. LanCaster Pro-STremotes are intelligent and indicate if the test has passed or failed.

Features:• Rugged palm-top design • Large backlit 128 x 64 graphical LCD• Suitable for UTP, STP, FTP & SSTP cables• Measuring range up to 150 metres (500ft)• Stores up to 1000 test results• Prevents accidental testing of a live network• Built in tone generator for pair tracing and identification• Battery life: 7.5 hours of continuous testing• Requires 4 x AA batteries

Dimensions: 165 x 90 x 37mm Weight: 350g

QUINTESTQ3011

The QUINTEST is a simple to use Structured Cabling Testerfeaturing a continually sequencing green/red LED display onboth main and remote units. It can test UTP and STP patchcables as well as installed wiring.

Wire Map and Cable faults, including Short Circuit Pairs, OpenCircuit Pairs, Shorts between Pairs, Pair Reversals, TransposedPairs and other Cable Miswires are indicated. Additional LEDindicators show screen continuity, when testing STP cables, andprovide warning of a low battery condition.

When not in use, the two halves “snap” together by means of amagnetic clasp and automatically power down. It is powered bya PP3 9V battery and allows 25 hours of continuous testing.

Designed and manufactured to international standards forquality, safety and reliability.


5 test 14/8/09 17:16 Page 6

57

05. Test Equipment

RMS MULTIMETERQ3024

Specifications:

Display: 41⁄2 digit display with large 17mm digitsAC V: 10μV to 750V (5 ranges), (50Hz to 500Hz) True RMSAC A: 10μA to 20A (5 ranges), (50Hz to 500Hz) True RMSDC V: 10μV to 1000V (5 ranges)DC A: 0.10μA to 20A (5 ranges) The 20A inputs have a fuse which will blow after 30 secondsOhms: 10mΩ to 30mΩ (6 ranges)Continuity: Buzz at <150ΩDiode TestLogic Test: Hi 2.8V ± 0.8V, Lo 0.8V ± 0.5VFrequency: 0.1Hz to 200kHz (3 ranges)Dimensions: 189 x 87 x 37mm

This top of the range multimetercombines a large 41⁄2 digit display with abasic accuracy of 0.05% and true RMScapability. It accurately measures thefrequency of mains supplies and up to20A AC or DC and also has a continuitybuzzer, an audible wrong range warningand data hold to freeze the currentreading. The combination of highspecification and broad capabilitiesmake it outstanding value for money.Supplied complete with Leads, holster,battery & manual.

MULTIMETER D20Q3025

Manual ranging multimeter used to measurevoltage and check batteries. Great formeasuring current of small electronic circuits.Includes elastomer boot to protect meter fromdamage. AC/DC voltage, DC amperagemeasurement. Resistance measurement.Audible continuity and diode tests. Tests 1.5Vand 9V batteries.

Voltage measurement: AC V: 200.0, 300 V, DC V: 200.0, 2000 mV;20.00, 200.0, 300 V Amperage measurement: DC A: 2000 μA; 20.00, 200.00 mAMeasurement Category: CAT II, 300 V

MULTIMETER D40Q3026

Multi-purpose meter for most electrical needs.Includes elastomer boot to protect meter fromdamage. AC/DC voltage, DC amperagemeasurement. Temperature measurement.Audible continuity and diode tests. Tests 1.5Vand 9V batteries.

Voltage measurement:AC V: 200.0, 600 V; DC V: 200.0, 2000 mV; 20.00, 200.0, 600V Amperage Measurement: DC A: 20.00, 200.0 mATemperature measurement: -40 to 1832 F, (-40 to 1000 C) Measurement Category: CAT III, 300V; CAT II, 600V

MULTIMETER D60Q3027

A perfect choice for residential and light commercial use.Includes elastomer boot to protect meter from damage.AC/DC voltage, AC/DC amperage measurement. Resistancemeasurement. Audible continuity and diode tests. Frequencymeasurement in voltage mode. Data hold to capturemeasurement. Max feature for added versatility.

Voltage measurement: 200.0 mV; 2.000, 20.00, 200.0; 600V Amperage measurement: 200.0 A; 2.000, 20.00, 200.0 mA; 10.00 AResistance measurement: 200.0 W, 2.000, 20.00, 200.0 kW; 2.000, 20.00 MW Frequency measurement: 2 k to 10 MHz Measurement Category: CAT III, 300V; CAT II, 600V.

SAFETY VOLTAGE INDICATORQ3030

This compliant contact voltage indicator rapidly andsafely checks for AC and DC voltages from 50V to600V. The bright, long life neon indicators give clearand immediate display of the voltage level range. Thetough, moulded case construction combined withheavy duty, double insulated leads make this a veryreliable and safe instrument. The return leadincorporates an HRC fuse which, together with theretractable test prods, ensures that the unit fullymeets all the GS38, M15/4, HSE and EN61010recommendations.

VOLTAGE DETECTORQ3033

Fast, easy to use, non-contact voltagedetector with bright LED and audiblealarm indicating voltage presence atoutlets, lighting fixtures, circuit breakers,wires and cables. 2 x 1.5V AAA batteriesincluded. Lifetime Limited Warranty.ON/OFF switch for longer battery life.

Voltage Detection: AC V 50-1000 Frequency: 50-500Hz Measurement Category: Cat IV, 1000V

5 test 14/8/09 17:16 Page 7

58

05. Test Equipment

RCD TESTER – RESIDUAL CURRENT TESTERQ3022

Specifications:Supply Voltage 240 Volts AC, 50/60HzRCD Ratings (IΔN) 6mA, 10mA, 30mA, 100mA, 300mA and 500mAHalf trip settings (1⁄2xIΔN) 3mA, 5mA, 15mA, 50mA, 150mA and 250mAFast trip settings 150mA, (for IΔN=6, 10 and 30mA only)Test polarity 0° and 180°Timing range 0-1999mSec (resolution of 1mSec)Timing accuracy ± 2% of reading ± 1 digitDimensions 190 x 190 x 54mm

The RCD Tester is fast and easy to useand suitable for testing all commonRCD’s. Supplied complete with carrycase, mains test lead & manual.

LOOP TESTERQ3023

This is a fast and accurate autorangingloop tester and is the lowest cost, 16thEdition, earth loop impedance testerwith PSC, available. It can carry outphase earth and phase neutral testingand automatically displays PSCCreadings. Supplied complete withprotective case, mains test lead, greenwander lead & manual.

Specifications:

Loop Range: 0 to 15Ω nominal in steps of 0.01Ω, 15 to 199.9Ωin steps of 0.1Ω

Accuracy: ± 2% of reading, ± 2% digitIpsc Range: 0 to 19.99kA in steps of 0.01kAFuse: 5A, HBC, Anti-Surge ceramic DIN 5 X 20mmTransient Protection: VDR at inputThermal Protection: Electronic delayDimensions: 190 x 190 x 54mm

INSULATION TESTER IN2003Q3021

This top of the range insulation andcontinuity tester offers 250, 500 and1000V tests in addition to all features ofTester IN2001. It is supplied with softprotective carry case, test leads, battery& manual.

Specifications:

Insulation: 10kΩ to 50MΩ at 250V10kΩ to 100MΩ at 500V10kΩ to 300MΩ at 1000VContinuity: 0 - 20Ω, 0.01Ω resolution(audible tone <1Ω)

Voltage range: 500V AC

Accuracy:± 2% of reading ± 1 Digit to 20MΩ± 3% of reading ± 1 Digit to 100MΩ± 10% of reading ± 1 Digit to 200MΩ

Complies with: BS EN 61557 and 16thEditionHousing: Polycarbonate/ABSDimensions: 190 x 90 x 54mm

CONTINUITY TESTER(BLEEP TESTER)

Q3032

Low cost, easy to use continuity testerwith audible and visual indication plusovervoltage protection. The loud buzzermakes it easy to use in noisyenvironments.

INSULATION TESTER IN2001Q3020

The IN2001 has a stable 500V testvoltage and a 200mA continuity test. Ithas a ‘push to operate’ and ‘turn tolatch’ test button on the insulationranges as standard. This instrument willindicate the presence of voltage ifconnected to a live supply. With anautomatic zero adjust feature to removethe resistance of the leads, this unitguarantees fast, accurate continuitytesting. It is supplied with soft protectivecarry case, test leads, battery & manual.

Specifications:Insulation: 10kΩ to 100MΩ at 500VContinuity: 0 - 20Ω, 0.01Ω resolution (audible tone <1Ω)Voltage range: 500V ACAccuracy:± 2% of reading ± 1 Digit to 20MΩ± 3% of reading ± 1 Digit to 100MΩ± 10% of reading ± 1 Digit to 200MΩComplies with: BS EN 61557, BS 7671, HD 384 and 16th EditionHousing: Polycarbonate/ABS

Dimensions: 190 x 90 x 54mmWeight: 0.5kg approx

5 test 14/8/09 17:16 Page 8

59

05. Test Equipment

1000A AC/DC CLAMP METERQ3029

Specifications:

Display: 31⁄2 digit LCD bargraphAC V: 100μV to 750V autoranging (50Hz to 500Hz) (5 ranges)AC A: 100mA to 1000A (2 ranges), (true RMS, 50Hz to 400Hz) DC V: 100μV to 1000V, autoranging, (5 ranges)DC A: 100mA to 1000A (2 ranges)Ohms: 100mΩ to 40MΩ (6 ranges)Capacitance: 1pF to 40μF, autoranging (5 ranges)Frequency: 0.1Hz to 400kHz, autoranging (5 ranges)Continuity: Buzz at <40ΩMax conductor: 57mm Ø or 70 x 18mm bus barDiode testDimensions: 277 x 102 x 49mm

1000A AC CLAMP METERQ3028

Low cost 1000A AC meterwith a large jaw size, voltageand resistance ranges. It isthe ideal basic clamp meterfor AC current use and hasthe functions of a standardmultimeter. The max controlallows you to measure themaximum reading, and theHold Button freezes thecurrent reading, which is veryuseful when working incramped places. Suppliedcomplete with battery, testleads, soft case & manual.

Specifications:

Display: 31⁄2 digit LCD with large 21mm digitsAC V: 1V to 750V (50Hz to 500Hz)DC V: 1V to 1000V (5 ranges)AC A: 100mA to 1000A (2 ranges), (50/60Hz) Resistance Ranges: 200Ω, 20kΩ, 20MΩ, 2000MΩResolution: 0.1Ω on 200Ω rangeContinuity: Buzz at <75ΩMax conductor: 57mm Ø or 70 x 18mm bus barDimensions: 277 x 102 x 49mm

This model measures AC andDC current to 1000A, hasvoltage, resistance, frequencyand capacitance functionsand is autoranging (exceptvoltage).The bargraph has 42segments for better resolutionof changing readings. It hasMax and Min readingmemories, AC Peak and Holdfeatures and Diode test.Manual range for optionaloverride of the autorangingfunctions. Supplied completewith leads, case, battery &manual.

FUSE FINDER KITQ3031

This analogue kit finds which fuse orbreaker controls a circuit and enablestracing from socket to socket on a circuit.The transmitter takes its power from themains and emits a signal which theadjustable sensitivity receiver can pickup. This combination can easilydistinguish the appropriate circuit, evenon a crowded fuse board. Sensitiveanalogue adjustment by thumb wheelfinds the right breaker rapidly.

CHECK PLUG BUZZ-ITQ3035

Same as classic Check Plug but givesan audible signal in addition to the threeneons lighting when the wiring is correct.It can also be used as basic fuse finder– when the correct fuse is pulled thebuzzer stops.

CHECK PLUGQ3034

Ensures that 13A sockets are wiredcorrectly, indicated by all three highbrightness, long life, neons illuminating.The plug induces less than 5mA of earthleakage, well below RCD trip thresholds.

METAL DETECTOR DMF 10 ZOOM Q3060

• Zoom function for more accurate locating • Locates not only metal but also wooden • substructures, live and non-live cables • Indicates the voltage via a high-resolution • 5-segment display • Unambiguous drilling recommendation • by means of red/green LED display • Easy marking of the drilling position with • the integrated marker • Extremely easy operation with automatic calibration• Supplied with protective case and 2 markers

METAL DETECTOR3 IN 1

Q3061

EARTH LOOPIMPEDANCE INDICATOR

Q3036

The only socket tester that gives ameasurement of the earth loopimpedance by checking within carefullyselected bands, without tripping theRCDs. It identifies faults other checkerscan not. Dimensions: 65 x 65 x 50mm

• Finds metal, studs, and live cables• Adjustable for accurate positioning• LED and audible signals• Requires 1 x PP3 battery (not included)

5 test 14/8/09 17:16 Page 9

60

05. Test Equipment

C.A.T.3 & GENNY3

GENNY3

Genny is a signal transmitter used in the detection of buried pipes and cables. Byapplying a unique signal to the pipe or cable the Genny3 allows the CAT3 to givedepth indication and to trace the service along a road or through a congested area.Genny3 is compatible with all versions of 33khz C.A.T.

C.A.T. & GENNYREFURBISHED

MEGAMOUSE ADAPTOR

Adaptors to join the Megamouse to RodsDuct 1, 2 and 5. Available as standardadaptors and also spring assisted forflexibility.

Supplied completewith calibrationcertificate.

MEGAMOUSE 33KHZ DEPTH 5MQ3047

A battery powered transmitter whosesignals are used to indicate their positionwhen inserted into an underground duct,drain or sewer. Normally attached toducting rods and located by means of theCAT Locator.

Specifications:

Description Frequency RemarksInduction 32.768 kHz Auto-selected without connection leadConnection 32.768 kHz Auto-selected by inserting connection leadQuality Control ISO 9001/ EN29001Batteries 2 x LR20 1.5V alkaline,

30 hours life, nominal @ 20°C intermittent use.

Warranty 12 months

SIGNAL CLAMPQ3045

Used with the CAT and Genny thissignal clamp allows the transmitter signalto be applied safely to a specific cablewithout electrical contact.

Q3042 CAT REFURBISHED

Q3043 GENNY REFURBISHED

Q3044 CAT & GENNY SET

Mode Frequency Sensitivity Locating Depth (m)@1m Good Conditions Poor Conditions

Power 50 HZ – 3.5 KHZ 3 mA 3 2Radio 15 – 30 KHZ 25 μm 2 1Genny 32.768 KHZ ± 20HZ 5 μA 3 2Avoidance Scan™ P/R/G Combined As Above As Above As AboveLocate Accuracy ± 10% of depthDepth Accuracy On undistorted signal and with not adjacent signals.

Line -5% 0.1m to 3m (4” to 10ft)

Sonde -5% 0.1m to 7m (4” to 16ft)

Batteries 2 x LR20 1.5V alkaline, 40 hours life, nominal @ 20°C intermittent use. Compatible with D type NiMH rechargeable batteries.

All productssuppliedcompletewithcalibrationcertificate.

Q3040 C.A.T.3

Q3041 GENNY3

Q3038 C.A.T.3 & GENNY3 INCL. BAG

Q3039 C.A.T.3 & GENNY3 NO BAG

Q3050 A - ADAPTOR ROD DUCT 1 & 2

Q3051 ADAPTOR ROD DUCT 5

Q3052 ADAPTOR ROD DUCT 1 & 2 SPRING ASSISTED

Q3053 B - ADAPTOR ROD DUCT 5 SPRING ASSISTED

Q3056 C - ADAPTOR ROD CONTINUOUS

A

B

C

C.A.T.3

A Cable Avoidance Tool used tolocate buried cables andpipes. The C.A.T3 utilisesthe latest technologies tobring you the mostoptimised cable avoidancetool in the market place today.

AvoidanceScan™ - Allows theuser to sweep an areasearching for Power, Radio andGenny signals simultaneously.

StrikeAlert™ - Alerts the user toshallow power cables byflashing the ALERT icon on thedisplay

Enhanced Signal ProcessingGives the C.A.T3 the ability toreject unwanted signals to a levelnever achieved before.

BacklightThe auto switching backlightminimises misreadinginformation from the meter

BatteriesThe New C.A.T3 uses just two DCell Batteries which arecompatible with the Genny3

batteries means. New battery lowindicator alerts when battery isgetting low.

C.A.T.3 Specifications

5 test 14/8/09 17:16 Page 10

61

05. Test Equipment

ADAPTOR TEST 15AQ2051

Test Adaptor used to aid the testing oftelephones which are terminated on LineJack Units.

Cord test set for use on MCCS BIXConnectors for single pair access.

ADAPTOR TEST 3AQ2050HEADSET 18AQ2049

Teletronics headset for use withoutsafety helmet.

Teletronics headset for use withsafety helmet.

HEADSET 17AQ2048


Test Adaptor used to aid the testing oftelephones which are terminated on LineJack Units.

Test Adaptor for use on ConnectionModule 1A

ADAPTOR TEST 49AQ2054 ADAPTOR TEST 48AQ2053

Cord test set for use on MCCS 3MConnectors for single pair access.

Test Adaptor which allows fixed testaccess on old style Block Terminals.


CORD SET SA9083

Cord set for use with the Tester SA9083 normally supplied as a completeset but individual components can also be supplied.

Q2021 CORD SET SA9083

Q2022 CORD TEST 1/1500A RED (X 1)

Q2023 CORD TEST 1/1500A BLACK (X 1)

Q2024 CORD TEST 1/1500A GREEN (X 1)

Q2045 CLIP TEST 38A (X 3)

Q2046 SPIKE TEST 10A GREEN (X 2)

A 2 Pole Test Cord for use on low profileswitching and disconnection modules.Supplied with 1 plug on flexible cordage1.5m long.

CORD D95737Q2043

CORD D94470Q2040

An open ended 2 pole test cord for useon connection and disconnectionmodules. Cord length 1.5m.

A 2 pole connection cord, supplied with 2plugs for use on connection anddisconnection modules.

CORD D94469Q2039 CORD D94473Q2042

As cord D94469 but 4 pole and for useon switching and disconnection modules.

As cord D94470 but 4 pole and for useon switching and disconnection modules.

CORD D94471Q2041

5 test 14/8/09 17:16 Page 11

62

05. Test Equipment

CLIP TEST 38AQ2045

A general purpose crocodile type clipwith socket end.Insulated crocodile clips are availableupon request.

CORD CONNECTING4/8C

Q2038

Used with Tester 132J.

Incorporates a Plug 510A at one end and2 Plugs 316 and a crocodile clip at theother. It is used to test line and exchangeequipment on Jacks Test 44-49.

CORD CONNECT 2/26AQ2037CORD AM4 HEADSETADAPTOR

Q2044

Cord set to enable the use of a Headset17A with Cable Tracing Kit AM4/TG4.

CORD POUYET 2 POLEQ2032

Comprises 200mm of cordage with ajack suitable for the insertion of a Plug631A on one end and a test plug for useon low profile 10 pair Strip Connection241B as used in Box Connections 201C.

A test cord for use on Pouyet 10 pairStrip Connections.

CORD CONNECTING6/10K

Q2031 CORD CONNECTING6/10F

Q2030

Comprises 200mm of cordage with ajack suitable for the insertion of Plug631A on one end and three crocodileclips on the other. The third wire is foran earth connection if necessary.

Comprises 200mm of cordage with ajack suitable for the insertion of Plug631A on one end and a mounded twopin plug on the other.

CORD CONNECTING6/10E

Q2029

CORD 2/12AQ2036

A test cord for use on SID 10 pair StripConnections.

Consists of 300mm of Cord Instrument2/78 with plug 227 at one end and plug412 on the other.

CORD SID 4 POLEQ2035CORD SID 2 POLEQ2034

A test cord for use on Pouyet 10 pairStrip Connections.

A test cord for use on SID 10 pair StripConnections.

CORD POUYET 4 POLEQ2033

CORD CONNECTING 6/10B

A six way cord for usewith Test Telephone 284,290, 295A and 300A. It is200mm long with a jacksuitable for the insertion ofa Plug 631A at one endand a test plug 242A or244A on the other.

Q2025 CORD CONNECTING 6/10B (242A PLUG)

Q2026 CORD CONNECTING 6/10B (244A PLUG)

CORD CONNECTING 6/10D

Comprises 200mm ofcordage with a jacksuitable for theinsertion of Plug 631Aon one end and a testplug on the other. Inaddition, an earth wireis brought out andterminated on acrocodile clip.

Q2027 CORD CONNECTING 6/10D 2 POLE (244A PLUG)

Q2028 CORD CONNECTING 6/10D 4 POLE (440A PLUG)

5 test 14/8/09 17:16 Page 12

63

05. Test Equipment

FIBRE CONTINUITY TESTERQ5070

Provides a high intensity, long-lasting LED light source thattransmits light instantly and accurately down the fibre. Usedwith single mode and multimode fibre. Viewable at distance ofup to 2km. Compatible with almost all types of connectors.Batteries included.

OPTICAL FIBRE IDENTIFIER

Specifications:

Applicable Fibre Singlemode fibreWavelength response 0.9 to 1.7μmPower Supply DC with 2 AA batteries (1.2 to 1.5V)

100 to 240V AC with optional FID-AA2Dimensions 40 x 185 x 26mmWeight 180g incl. batteries

Power Meter (FID-20R) Specifications:Wavelength response 1.31μm, 1.55μmDetectable kind of signal Traffic signal, CW light, light signal with

modulated tones at 270Hz, 1kHz, 2kHzDetectable Light Power 0.1 to -60dB at modulated tone, 0.1 to -40dB

at traffic signal & CW lightAccuracy Within +/- 0.3dB at room temperature

FID-20R is Optical fibre identifier with power meter function FID-21R is Optical fibre identifier

The FID-20R and FID-21R are handheld instruments for detecting optical signalswith no interruption to signal transmission. They are lightweight, robust, anddesigned for ease of use and accuracy.

Features:

• Identification of traffic signal, CW light, modulated tone • Applicable for 0.25 and 0.9mm coated fibre, up to 3mm fibre cord, up to 12

fibres ribbon • Light signal direction discriminated • Easy fibre clamping with long head style • Battery operation

Q5071 OPTICAL FIBRE IDENTIFIER WITH POWER METER FUNCTION

Q5072 OPTICAL FIBRE IDENTIFIER

5 test 14/8/09 17:16 Page 13

64

05. Test Equipment

FIBRE TEST SET 525

The 525 products provide an accurate, fast and easy to use method to measure insertion and return loss on multi-mode and single-mode fibre optic cables. The AUTOTEST button ensures the user is guided through themeasurement to obtain dual wavelength (850/1300nm or 1310/1550nm) bi-directional insertion loss measurements.

Features:• Automated bi-directional testing• Optical return loss measurements• Dual wavelength insertion loss measurements• Multi-mode and Single-mode models feature user settable PASS/FAIL thresholds• Communications between units via messaging• Wide dynamic range optical power meter• Test record storage and data management software• Rugged outside plant instrument package• Universal connector interface• 8 hours of continuous operation• Rechargeable NiMH batteries• Store up to 1500 measurement records

VISUAL FAULT LOCATOR 170XLQ5005

• Continuous wave output mode for steady fault location• Find breaks to 3km• Blinking output mode increases viewing contrast• Easy-to-use quick interface fits all 2.5mm connector interfaces (FC, SC, ST)• 1.0mW output power• Ergonomic rotary switch permits easy one-handed operation• Rugged, compact and splash-proof aluminium design• Two AA batteries provide 48 hours continuous operation• Nylon belt holster included• Light source type: 635nm red laser diode• Center wavelength: Nominal 635nm• Range (typical): 630nm to 640nm• Spectral width (FWHM): <2nm

Length: 220mm

Q5000 TEST SET 525-30-PCX

Q5001 TEST SET 525-60-PCX

Q5002 TEST SET 525-60-APC

525-30-PCX 525-60-PCX 525-60-APC

Instrument Type Multimode Smart Loss Singlemode Smart Loss Singlemode Smart Loss Test Set Test Set Test Set

Interface Connector PC Connector PC Connector APC Connector

Detector Type InGaAs InGaAs InGaAs

Display Range +10dBm to 70dBm +10dBm to 70dBm +10dBm to 70dBm

Calibr. Wavelength 850, 980, 1300, 1310, 850, 980, 1300, 1310, 850, 980, 1300, 1310, 1550, 1480, 1625 1550, 1480, 1625 1550, 1480, 1625

Fibre Type Multimode 62.5/125μm Singlemode 9/125μm Singlemode 9/125μm

Center Wavelength 850nm ± 30nm/ 1310nm ± 30nm/ 1310nm ± 30nm/ 1300nm ± 30nm 1550nm ± 30nm 1550nm ± 30nm

Dimensions: 193 x 109 x 58mmWeight: 1 kg

Full specifications available on request

5 test 14/8/09 17:16 Page 14

65

05. Test Equipment

FIBRE OPTIC TEST KIT 5890XL MULTIMODE &SINGLEMODE

Consists of:

Fibre Optic Power Meter 560XLLED Source 850nm/1300nm 570XL (FC, SC or ST)Laser Source1310/1550nm 580XL (FC, SC or ST)FC/PC, SC/PC or ST/PC Snap On AdaptorCarry Case

FIBRE OPTIC POWER METER 560XLQ5010

• Calibration Wavelengths 850nm, 1300nm, 1310nm and 1550nm• Power Range -3dBm to -60 dBm• 0.01dB measurement resolution • Easy to use - three buttons control all functions • Multi-wavelength storage - stores and recalls reference power levels • Snap on connector interface adapts to FC, SC and ST connectors • 2 x AA size 1.5V batteries • 100 hours of continuous operation • User selectable auto shut-off • Rugged and splash-proof

All items can be suppliedindividually or at variouscombinations.

LASER SOURCE 1310/1550NM 580XL

• Wavelengths 1310/1550nm • Stable calibrated output • Easy-to-use • Continuous wave and modulated output • Fixed connector interface FC, SC or ST• 80 hours of continuous operation • User selectable auto shut-off • Rugged and splash-proof • Economically priced

LED SOURCE 850NM/1300NM 570XL

• Centre Wavelengths 850nm/1300nm • Typical Range 840nm to 880nm/ 1270nm to 1345nm • Max. spectral width 55nm/ 150nm • Stability ±0.05dB ±0.05dB • Modulation frequency 270 kHz, 1 kHz and 2 kHz • Typical power output • 100/140um -13dBm -20dBm • 62.5/125um -13dBm -20dBm • 50/125um -14dBm -21dBm • Connector interface FC, SC or ST• Rugged and splash proof• 2 x AA size 1.5V batteries • 80 hours of continuous operation

Q5007 FIBRE OPTIC TEST KIT 5890XL - FC

Q5008 FIBRE OPTIC TEST KIT 5890XL - SC

Q5009 FIBRE OPTIC TEST KIT 5890XL - ST

Q5011 LED SOURCE 570XL-FC

Q5012 LED SOURCE 570XL-SC

Q5013 LED SOURCE 570XL-ST

Q5014 LASER SOURCE 580XL-FC

Q5015 LASER SOURCE 580XL-SC

Q5016 LASER SOURCE 580XL-ST

5 test 14/8/09 17:16 Page 15

66

05. Test Equipment

OPTICAL POWER METER

The Power Meters RS160 and RS170 are accurate, durable and easily operated handheld units for attenuation andpower throughout measurements on point to point fibre optic links. They allow testing of passive optical networks atthe three main wavelengths 1310, 1490 and 1550nm. Its linear amplifier technology combined with InGaAs detectorensures long time accuracy.

Features:

• Rugged design• Large, backlit LCD display• Manual calibration by customer• Fast response time, auto-zeroing capabilities and tone detection• Auto shut off after 10 minutes• Continuous working life up to 240 hours• 3 AA 1.5V dry batteries• 18 months warranty• Supplied complete with: Operating Instructions, Cotton Swabs, Patch cords, Universal Adapter and Cotton Case• Interchangeable adapters SC, ST, FC and LC can be supplied on request

Specification:Power Range (dBm) RS160: -3 - +70

RS170: -50 - +23Calibrated Wavelength (nm) 1310, 1490, 1550Dimensions 152 x 74 x 26mmWeight 120g incl. battery

Q5018 OPTICAL POWER METER RS160

Q5019 OPTICAL POWER METER RS170

MINI POWER METER RS100

Handheld, slim and easy to use Mini Power Meters for accurate testing of singlemode and multimode fibre.

Models RS100A, RS100B and RS100C offer measurement in dBm, mW, uW. Each unit comes with universalconnector system for connection to the most popular connector type (FC, SC & ST available).

Features:• Slim & Compact design• 4 digit display• Single key entry for wavelength selection and optical measurements• Wide dynamic range• Models RS100A and RS100B are ideal for general singlemode and multimode Telecoms fibre optic testing• Model RS100C (High Power) is ideal for CATV systems, optical amplifiers and other high power devices• Auto shut off after 10 minutes• Continuous working life up to 50 hours• 3 1.2V batteries• Low battery indicator• Supplied complete with: Operating Instructions, Cotton Swabs, Universal Adapter, Battery & Cotton Case

Specification:Detector Type InGaAsPower Range (dBm) RS100A: +0 to -50

RS100B: +10 to -40RS100C: +20 to -30

Calibrated Wavelength (nm) 850, 1310, 1550Dimensions 90 x 55 x 16mmWeight 160g

Q5020 POWER METER RS100A

Q5021 POWER METER RS100B

Q5022 POWER METER RS100C

ADVANCED OPTICAL POWER METER RS140Q5017

Features:• Intelligent, Multi-functional, Fast Test• Quick response, no warm up time – reducing testing time• Auto identification of frequency• Absolute and relative power measurement• Large LCD display • Low battery indication• Damp, dust and water proof• Energy saving design – Auto power off function

Specification:Wavelength (nm) 800 -1700 Power Range (dBm) -70 - +6Calibrated Wavelength (nm) 850, 980, 1300, 1310, 1550Optical Connector FC/ Universal 2.5mm adaptorPower Supply Rechargeable batteryOperating Time 25 hoursWeight 300gDimensions 180 x 90 x 37mm

5 test 14/8/09 17:16 Page 16

67

05. Test Equipment

FIBRE OPTIC TALK SET RS410Q5042

This latest intelligent instrument that combines functions both of digital optical phone and stabilised lightsource in one set is widely used in operations of installation, optical testing, maintenance and fibreattenuation value testing in Data network, CATV and Telecommunication network. RS410 Talk Set cancarry out full-duplex communications with high quality connection without being affected by distance.

Features:• Full-Duplex high quality digital communication• Functions of online display and online call• Large LCD display with seven colours backlight• Low power display• Combining functions of digital optical phone call and stabilised light source

Specification:Wavelength 1319/1550 Transmission Distance ≥ 80kmDynamic Range 40dBmOptical Connector FC/PCPower Supply Rechargeable batteryOperating Time 5 hoursWeight 600gDimensions 196 x 100 x 40mm

MINI LIGHT SOURCE RS200

The RS200 Mini Light Source is compact battery powered stabilised laser source operating 1310nm or 1550nm singlewavelength. The highly efficient, stabilised outputs use rear facet diode technology to compensate for short and longterm drift.

Features:

• Single key entry for wavelength selection • Variable Power Output (each unit is factory pre-set to launch at -7dBm but can be easily manually changed)• Continuous working life up to 40 hours• 3 AAA batteries• Low battery indicator• Supplied complete with: Operating Instructions, Cotton Swabs, Universal Adapter, Battery & Cotton Case

Specification:Wavelength (nm) RS200A: 1310

RS200B: 1550Output Power (dBm) -7 to -6Stability ±0.05/15mins; ±0.10/8hrSpectrum Width (nm) ≤10Connector FC TypeModulation CWDimensions 90 x 55 x 16mmWeight 80g

Q5023 MINI LIGHT SOURCE RS200A

Q5024 MINI LIGHT SOURCE RS200B

LED LIGHT SOURCE RS220 Q5041

The RS220 is a handheld battery powered stabilised laser source operating 850nm and 1310nm dual wavelength.Together with any of RS Series Power Meter it makes the perfect combination for accurately testing multimode orsinglemode cable installations.

Features:• Single key entry for wavelength selection • Variable Power Output (each unit is factory pre-set to launch at -7dBm but can be easily manually changed)• 8.4V rechargeable battery• Low battery indicator• Supplied complete with: Manual, Cotton Swabs, Power Supply Adaptor, Patch cord, Carry Case

Specification:Wavelength (nm) 850/1310nm dualOutput Power (dBm) 7 @850nm, -16 @1310nm

(at 62.5/125um MM fibre)Stability ±0.05/15mins; ±0.10/8hrSpectrum Width (nm) ≤100Connector FC TypeModulation CWDimensions 150 x 76 x 26mmWeight 160g

5 test 14/8/09 17:16 Page 17

68

05. Test Equipment

VISUAL FAULT LOCATOR RS650Q5044

This is a rugged, handheld and easy to use Optical Visual Fault Locator for singlemode and multimodeapplications. It features a universal “fast connect” interface that accepts any connector style with a2.5mm ferrule.

Unlike many pen-size VFL, it features a choice of continuous wave or flashing output. The “fastconnect” interface eliminates the inconvenience of having to use a patch cable for direct connection tofibre under test if connector styles a dissimilar.

The Model RS 650 VFL is an ideal assistant in installation, testing and finding breaks in LAN cables,verifying short lengths of installed fibre or looking for cracked fibre in splice cases, bad connectors, tightbends, backbone breaks or anywhere light continuous needs checking.

Features:• Singlemode and Multimode operation• Universal “fast connect” interface, SC, ST, FC• 30 hour continuous operation• Continuous Wave output or flashing output (2Hz)

Specification:Central Wavelength 650±10nm @ 20°C Range Visibility beyond 5kmPower Supply 2 x 1.5v AAAWeight 50gDimensions 100 x 50 x 25mm

ZOOM OPTICAL POWER METERQ5025

Specification:

Wavelength Range 750 to 1700 nmMeasurement Range +3 to -52 dbmAbsolute Accuracy +/- 0.24 dbCalibrated Wavelengths 850nm, 1300/1310nm, 1550nmResolution 0.1 db +/- 0.20 dbUniversal 2.5mm connector part

This ZOOM Series (Zeroed OutputOptical Meter) is a cost effectiveentry level meter for use on bothSingle and Multimode Cables. ThisMeter does not include a datastorage facility. It has a single buttonsetting for zero reference and longbattery life.

VISUAL FAULT LOCATOR (PRECISION COUPLED)Q5026

Specification:

Visual Range Up to 5km (3.1 miles)Optical Output 2 dbm (min) red laserOptical Transmission Continuous wave or pulsed at 6HZ W/12.5% duty cycleDimensions 125 x 62 x 32mmWeight 170 g

This Visual Fault Locator is a hand heldtester used to troubleshoot faults in thecontinuity of single mode and multimodefibre cables. It is particularly good attesting the continuity at fibre launchpoints and in OTDR dead zones.

The 365nm high density visible redlaser beam is precision coupled(PCVFL) in to optical fibre, breaks andmicrobends in the fibre cable to deflectthe red light in to the jacket of the fibre,producing a visible red glow at the pointof the cable fault.

The Visual Fault Locator will detectcommon faults and breaks inpatchcords and defective splices andvisually identify correct distribution offibres in patch panels.Continuous wave mode and pulsedmode allow for easy Fibre identification.

5 test 14/8/09 17:17 Page 18

69

05. Test Equipment

SINGLE MODE LASER LIGHT SOURCE

This item is a handheld Laser LightSource. The Light Source is simple tooperate and incorporates a single switchwhich controls the power and selects theoutput wavelength. Available with FC, SCor ST Fibre Connectors.

Specification:

Output Power -10 dbm into singlemodeInitial Accuracy +/- 10 db @ 25 °CCalibrated wavelength 1310nm, 1550nmCentre Wavelength 1310nm +/- 30nm, 1550nm +/- 30nmSpectral Width 2nm @ 1310nm, 2nm @ 1550nmNist Traceable

Q5027 OWL SINGLE MODE LASER LIGHT SOURCE ST CONNECTIVITY

Q5028 OWL SINGLE MODE LASER LIGHT SOURCE SC CONNECTIVITY

Q5029 OWL SINGLE MODE LASER LIGHT SOURCE LC CONNECTIVITY

WAVETESTER MULTIMODE KIT WITH ST CONNECTIVITY

WAVETESTER MULTIMODE KIT WITH SC CONNECTIVITY

WAVETESTER MULTIMODE KIT WITH ST CONNECTIVITY AND INBUILT VFL

WAVETESTER MULTIMODE KIT WITH SC CONNECTIVITY AND INBUILT VFL

WAVETESTER SINGLEMODE KIT WITH ST CONNECTIVITY

WAVETESTER SINGLEMODE KIT WITH SC CONNECTIVITY

WAVETESTER SINGLEMODE KIT WITH ST CONNECTIVITY AND INBUILT VFL

WAVETESTER SINGLEMODE KIT WITH SC CONNECTIVITY AND INBUILT VFL

WAVETESTER QUAD WAVELENGTH KIT WITH ST CONNECTIVITY

WAVETESTER QUAD WAVELENGTH KIT WITH SC CONNECTIVITY

Q5031

Q5032

Q5033

Q5034

Q5035

Q5036

Q5037

Q5038

Q5039

Q5040

BOLT OPTICAL LENGTH TESTERQ5030

The BOLT Tester (Beaming OpticalLength Tester) measures optical fibrecable by looping 2 fibres at 1 link of apatch cord. The tester emits a lightsignal down the cable and the time ittakes to travel through both fibres isconverted to a length in km’s and dividedin 2 to show the length installed. Thisitem measures the length of both singleand multimode fibre cable.

• Easy to read LED display• Extended battery life up to 15 hours per

single 9V battery• Low battery indicator

Specification: Measurement Accuracy +/- 2.5 metresMeasurement Range 25 kmsResolution Up to 1 metre

OPTICAL LOSS TEST KIT - WAVE TESTER SERIES

The Wave Tester Kits which we offer include a Power Meter and a customer’s choiceof light source combinations provided in a hard shell carrying case complete withrubber boots, lanyard straps and OWL Reporter Software, and CD operating guide.

The Wave Tester Kits can be used for standard compliant testing or just simple opticalloss tests. The Kit stores up to 100 link test results which are then downloaded to aPC via the OWL Reporting Software. Once downloaded the engineer simply run’s thelink budget wizard to produce full standards certification reports.

Wave Tester includes automatic wavelength switching and automatic data pointstorage, single port dual wavelength sources eliminate the need for separatereference cables, and also allow some versions to have an optional VFL installed.If you need all 4 wavelengths, the Quad Wavelength Test Kit gives you 850, 1300,1310 and 1550nm all in 1 source.

5 test 14/8/09 17:17 Page 19

70

05. Test Equipment

MINI OTDR RS800

The RS800 is a high performance mini OTDR,which is small in size, light in weight and rugged inconfiguration. It has a large colour LCD and USBinterface. With the RS800 you can measure unit/connection/ transmission loss and locate faults orbreaks on optical fibres. It is widely applied in themanufacture, construction and maintenance ofoptical fibres.

Features:

• Rugged design• High quality 7.7” colour LCD touch screen• 16000 sampling points• 1.6m short event dead zone• Deep memory for data storage• Transmit data to PC by serial or parallel interfaces• Battery operation life over 8 hours• Intelligent battery capacity display• USB Interface• Write/ read file in Bellcore GR196 file form• Dimensions: 258 x 198 x 90mm• Weight: 2.7kg

Full specifications available at request.

Specifications:

Pulse Width 10ns to 2048nsModule 3542 3537 3532 5636 8332Central Wavelength 1310/1550 1310/1550 1310/1550 1550/1625 850/1300

±20nm ±20nm ±20nm ±20nm ±30nmApplicable Fibre Singlemode Singlemode Singlemode Singlemode MultimodeDynamic Range (SNR=1) 42/40dB 37/35dB 32/30dB 36/36dB 24/32dBEvent Dead Zone *1 ≤1.6m ≤1.6m ≤2.5m ≤1.6m ≤3mDistance Range 1.6 – 512kmSampling Resolution 0.1 – 32mOptical Connector FC/UPC (universal connector option)

Q5050 RS800 OTDR WITH 3542 MODULE





NOYES M200 OTDR

The Noyes M200 OTDR offers unmatched fibre optic cable test and fault finding capabilities in a handheld package.Multimode (850/1300nm), Singlemode (1310/1550), and ‘Quad’ (850/1300/1310/1550nm) wavelength models are offered. The M200 is ideal for Tier 2 testing of premises networks or certification and troubleshooting of FTTX PON networks. It isbased on a new hardware/software platform that supports automatic and manual setup, precision event analysis, dual-wavelength testing, fibre identification using Noyes ‘TR’ test receivers, rich file naming and folder setup, internal andremovable media data storage, and USB connectivity. Test ports are equipped with tool-free adapters, which can bechanged in seconds.

Features:• Handheld, 0.9 kg (2 lb) • 850/1300/1310/1550 nm• 22 dB (MM), 26 dB (SM) dynamic range • Integrated Visible Fault Locator (650 nm)• Splice Verification • Tool-free, switchable adapters (ST/SC/FC)• Bellcore (GR-196) .SOR file format • CompactFlash™ memory card• Tool-free LiIon battery (6 hour life) • Bright, transflective touchscreen display

Specifications:Wavelengths Multimode: 850/1300nm; Singlemode: 1310/1550nmEvent Dead Zone 1 1.5mAttenuation Dead Zone 2 9mRange Multimode: 250m to 64km; Singlemode: 250m to 208kmDimensions 230 x 110 x 70mmWeight 0.9kg

Visual Fault Locator Specifications:Wavelength 650nmOutput Power 0.8mw

Full specifications available at request.

Supplied complete with rugged, soft-sided carry case with shoulder strap, AC power adapter, Power cord,SC and FC test port adaptors. The M200 Quad model also includes an ST test port adaptor.

Q5057 NOYES M200 OTDR MULTIMODE

Q5058 NOYES M200 OTDR SINGLEMODE

Q5059 NOYES M200 OTDR QUAD

5 test 14/8/09 17:17 Page 20


Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


06. External Overhead Ladders & Accessories

Tensioners

Straps & Chains

Pole Lifting & Handling

Pole Installation

Pole Furniture

Block Terminals

Dropwire & Accessories

Aerial Brackets & Grips

Height Measuring

6 External Overhead 12/8/09 11:30 Page 1

72

4 TREAD

5 TREAD

6 TREAD

7 TREAD

8 TREAD

10 TREAD

12 TREAD


LADDER EXTENSION 5BE2098

LADDERS AND ACCESSORIES

LADDER TRADE

• Certified to BSEN131 • Ideal for all types of trade work • Large comfortable 'D' shaped rungs • Rigid extruded box section stiles for added strength • Secure non-slip grip with all round PVC moulded feet • A comprehensive range of sizes available

An Aluminium triple section ladderdesigned as a replacement for theLadder Extension 5A. • Certified BS 2037 class 1• Incorporates a ’D’ shaped rungs

which provide extra strength andcomfort for the user.

• Fitted with a double safety catch andnylon rollers for easy operation withminimum effort.

• Length: closed 2.5m - open 6m• Weight: 18.5kg

LADDER EXTENSION 7AE2099

A fibre glass version of Ladder Extension 5B. Ideal to use in environments where electrical hazards exist. • Conforms to BSEN131:1993. Part

certified to ANSI A 14.5-1982.

• Length: closed 2.5m - open 6m• Weight: 23kg

CATALOGUE CLOSED EXT. RUNGS WEIGHT CODE HEIGHT (M) HEIGHT (M) KG

TWO SECTION

E2180 2.41 4.18 8 9.0kg

E2181 2.91 5.18 10 10.5kg

E2182 3.41 6.18 12 14.0kg

E2183 3.91 7.18 14 16.0kg

E2184 4.41 8.18 16 20.0kg

E2185 4.91 9.18 18 23.5kg

E2186 5.41 10.18 20 29.0kg

THREE SECTION

E2187 2.41 5.94 8 16.5kg

E2188 2.91 7.44 10 18.5kg

E2189 3.41 8.94 12 25.5kg

E2190 3.91 10.44 14 28.5kg

STEPLADDER SWINGBACK

• Certified to both BSEN131 and BS2037 Class 1• Double riveted treads• Rigid box section back legs• Deep, non-slip treads & non-slip safety feet • Lightweight

STEPLADDER SWINGBACK FIBREGLASS

• Certified to BSEN131 • Non-conductive • Lightweight

E2208

E2209

E2210

E2211

E2212

E2213

E2214

4 TREAD

5 TREAD

6 TREAD

7 TREAD

8 TREAD

10 TREAD

12 TREAD

E2201

E2202

E2203

E2204

E2205

E2206

E2207


73

4 TREAD

5 TREAD

6 TREAD

7 TREAD

8 TREAD

10 TREAD

12 TREAD



STEPLADDER PLATFORM

• Certified to both BSEN131 andBS2037.

• Same features as Swingback but inaddition has a large and comfortableworking platform

E2215

E2216

E2217

E2218

E2219

E2220

E2221

LADDER COMBINATION

A versatile ladder which can be easily used as:• A free standing ladder • A single section ladder • A double or triple extension ladder• Trestles • A stairway ladder • A working platform

STEPLADDER PLATFORM FIBERGLASS

• Certified to BSEN131 • Non-conductive • Lightweight

4 TREADE2222

5 TREADE2223

6 TREADE2224

7 TREADE2225

8 TREADE2226

10 TREADE2227

12 TREADE2228

LADDER ROOF

• Lightweight, robust, specialist Roof Ladder with a heavy duty ridge hook• Industrial non-slip rungs & box section stiles • Rubber covered bearer bars distribute weight evenly preventing damage to roof • Suitable for use on most commercial vehicles • Available in single or double sections

CODE CLOSED OPEN RUNGSLENGTH (M) LENGTH (M)

SINGLE SECTION

E2191 - 2.95 11

E2192 - 3.45 13

E2193 - 3.95 15

E2194 - 4.50 17

E2195 - 4.97 19

E2196 - 5.46 21

DOUBLE SECTION

E2197 2.94 4.64 11+9

E2198 3.44 5.64 13+11

E2199 3.94 6.64 15+13

E2200 4.30 7.67 17+15

CATALOGUE CLOSED FREE EXTENSION TRESTLE RUNGS STILE WEIGHTCODE HEIGHT STANDING HEIGHT HEIGHT DIMENSIONS

(M) HEIGHT (M) (M) (M) (MM) (KG)

E2237 2.20 3.60 5.00 2.05 3 x 7 68 x 25 15

E2238 2.70 4.70 6.70 2.65 3 x 9 73 x 25 20

E2239 3.30 5.50 7.80 3.13 3 x 11 85 x 25 24

E2240 3.80 6.60 9.50 3.68 3 x 13 98 x 25 33


74


LADDER TIEE2132

LADDER LEVELLERE2044

Adjustable Ladder Leveller used to stabiliseLadders on uneven ground. It fits any ladderand is simple to adjust in either direction,75mm (3”) up or down. 3 Year Guarantee.

LADDER CLAMPE2235

Locks ladders and steps securely in place.Sold in pairs with or without padlocks.

LADDER STOPPER

• High strength top quality aluminium “T”piece bonded inside 11mm high-gripvulcanised rubber base complete with a2mm tread for extra grip

• Maximum strength on all surfaces even inwet conditions

• Comes in 3 sizes to fit all ladders

CHAIN LADDER 3’E2036

A general purpose security chain forsafeguarding ladders when storedunattended.

LADDER STEP FEETE2230

LADDER TELESCOPIC 3.8ME2246

LADDER STAYE2236

Used to keep the top end of the ladder300mm away from a solid surface.Easy to attach and detach.

This 12 section portable telescopicladder is ideal for many professionsespecially installers and surveyors. Itcan be easily stored in the car bootand is very easy to use with its uniqueextend and locking mechanism it clickssmoothly and effortlessly into place. • Weights only 11 kg• Extends to 3.8m and closes down to

0.76m• Conforms to EN131 Standard

LADDER STOPPER 16”E2248



Used for lashing the base of the ladder.For use with ladders extension 4B, 5B, 7A.

LADDER SECTIONAL (SURVEYORS)

• Interlocking sectional ladders, manufactured in oval section with serrated rungs • Very easy to use, designed for inspection purposes only and can be easily stored

in the boot of a car • Each section is supplied with aluminium locating spigots, which are inserted into

the stiles of the next section • Safe, lightweight

CODE LENGTH M WEIGHT KG RUNGS

E2241 1.80 4.1 2

E2242 2.70 5.9 3

E2243 3.60 8.2 4

E2244 4.50 10.0 5

E2245 5.40 11.8 6

LADDER FEETRUBBER

E2231LADDER FEETSUCTION RUBBER

E2232LADDER FEETARTICULATED

E2233

LADDER WALLRUNNING WHEELS

E2234


CARRYING BAGE2247


75


STRAP TENSIONING1A

E2021

A webbing strap 3 metre long and45mm wide. It is terminated with a 9degree twist snap hook and used inconjunction with Tensioner 3A tosecure poles on Pole Erection Units.

LINE SASH 2E2057

A general purpose 4mm diameterpolypropylene rope. It is most suitablewhen used in the overhead erection ofdropwire, particularly across roads dueto its “dead” property. Consists of 4 hanks x 33M.

STRAP TENSIONING2A

E2022

A webbing strap 9 metres long and45mm wide. It is terminated with a “D”buckle and used in conjunction withTensioner 3A to secure poles to PoleErection Units.

TENSIONER 3AE2023

A ratchet tensioner fitted with a snaphook and anchor strap. Used withStraps Tensioning 1A & 2A.

LINE SASH 15E2056

Polypropylene rope used on overhead work.Size: 8mm diameter, 1 x 50m hank.

SLING LIFTING 10AE2024

Circular sling used for lifting andhandling hollow poles. Length: 3mWidth: 50mmSWL: 1000kg

POLE LIFTING & HANDLING

Used with Grip Temporary Hold No.1during the erection of aerial cables. Itis a galvanised steel welded link chain5’ long with a billet hook on one end.

CHAIN GRIP TEMPORARYHOLD NO 1

E2027

A high tensile 3/8” long steel link chainwith two plain ends used as an anchorpoint when tensioning aerial cables. Length: 915mmSWL: 763kg

CHAIN TENSIONINGE2028

STRAP TEMPORARYHOLD NO 1

E2030

Used to secure Hook Temporary HoldNo.1 to hollow poles whilst fittingClamps Aerial Cable. Is terminatedwith a ratchet buckle.Length: 700mm Width: 24mm

HOOK TEMPORARYHOLD NO 1

E2012

A steel “U” type hook for use on hollowpoles as a temporary cable supportwhen erecting and tensioning aerialcables.

HOOK TEMPORARYHOLD NO 2

E2029

As Hook Temporary Hold No.1 butsupplied complete with strap.


As Sling Lifting 5A but 3 metres in length.


A flat webbing strap of woven polyesterfibre used for lifting.Length: 2m Width: 30mmSWL: 1000 kg

SLING WIRE ROPE 1AE2025

Galvanised steel wire rope completewith reeving thimbles on each end,used for handling poles. Length: 1.4 metres SWL: 1400 kg

Used with Dispenser Dropwire to aidthe dispensing of Sash Line. It is arevolving drum on a spindle with awinding handle.

DISPENSER SASH LINE

E2093

PROBE POLE TESTE2109

Used to detect external decay onpoles. 10” long & 6mm diameterhardened steel spike


76


Similar to Anchor Screw Stay No1 butinstalled by means of a Hammer Slide.

HAMMER SLIDE NO.1E2108

Used in the manual installation ofAnchor Stay Manual No 1. The anchoris driven into the ground by means ofthe steel bar and handle which isinserted into the anchor.

ANCHOR STAYMANUAL NO1

E2118

Used as a groundanchorage when stayingpoles. Installed by apole erection unit.Supersedes Rod Stay 2.

ANCHOR SCREWSTAY NO.1

E2117PLATE BEARING NO. 1E2142

Used during the installation of AnchorStay Manual No.1 to prevent the stayfrom being driven too deep.

POLE CARRYING TRUCK E2102

Used to transport poles over shortdistances.

TWISTER POLEE2054

Used to turn poles in situ.

LIFTER POLE 16’E2019

A hand operated pole lifter for use on light to medium weight poles of up to 9 metres in length.

POLE LIFTING & HANDLING

Total height closed 3’SWL: 5080 kg

JACK POLE

HORSE POLE NEWDESIGN

E2026

New improved design horse pole withadditional stability

JACK POLEE2017

BAR OPERATING LARGEE2080

3 TONNE PULLERE2111-3

6 TONNE PULLERE2111-6

A high tensile link chain for use withJack Pole.Length: 1.5mSWL: 3150 kg

CHAIN JACK POLEE2018

Hand operated lever type pole twister.

LEVER POLETWISTER

E2058

A pump action type ratchet used toraise and lower loads. It hasincorporated a safety brake whichenables the operator to sustain theload in all positions. Used fortensioning cables.SWL: 3048kg Max lift: 1.9 metres

CHAIN PULLER


77


Used as a support for clamps dropwireon poles.

RING POLEHEADDROPWIRE

E2067

Used on wooden poles.

STEPS POLE NO 1E2050

Steps Pole No 1with ring attachedto accept ClampsDropwire. For useon wooden poles.

RING POLEHEADSTANDOFF

E2066

Used to attach steps to wooden poles Size: 3” x 3/8”

Pole installation tools with wooden / metal handles

SCREW COACH 3”E2110

A modified carpenters hand brace usedto attach and remove steps from poles.

BRACE COACHSCREW

E2016 LETTER & NUMBER POLE PLASTIC

Plastic white pole markers with blackletters or numbers.

LETTER POLE PLASTIC AE2150

LETTER POLE PLASTIC BE2151

LETTER POLE PLASTIC CE2152

LETTER POLE PLASTIC DE2153

LETTER POLE PLASTIC EE2154

LETTER POLE PLASTIC JE2155

LETTER POLE PLASTIC LE2156

LETTER POLE PLASTIC ME2157

LETTER POLE PLASTIC SE2158

LETTER POLE PLASTIC TE2159

NUMBER POLE PLASTIC 0E2160






BAR DIGGINGE2014





POLE FURNITURE

POLE INSTALLATION TOOLS

A B C D E F

A

SPADE RABBITINGE2001B

SPOON EXCAVATINGE2135C

SHOVEL HOLERE2103D

PUNNER IRONE2003E

PUNNER HALF MOONE2146F

Pole installation tools with fibreglass handles

BAR DIGGINGE2015

A B C D E F

A



SHOVEL HOLERE2104D

PUNNER IRONE2004E



78


WIRE LASHING

Galvanised Steel Wire used to lashpolyethylene and lead sheathed AerialCables to Suspension Wires.

Contains 2 or 4 PVC insulated twistedpairs with tinned copper conductorsand a separate strength member.

DROPWIRE CABLE

10B 2 PAIR 350M REELE2047

14 4 PAIR 350M REELE2048

WIRE LASHING 1B (75M)E2121

WIRE LASHING 2A (300M)E2122

POLE FURNITURE

SPRAY DEWATERINGE2126

Used to displacemoisture fromexternal blockterminals.

BLOCK INSERT 1AE2081

A four way terminal block insert for usewith Block Terminal 66B

BLOCK INSERT 2AE2082

A six way terminal block insert for usewith Block Terminal 66B

SCREWDRIVER 12E2125

Used on Blocks Terminal 76 & 86 totighten and loosen screws.

BLOCK TERMINAL 18A & 19A

External Terminal housings for wall orpole mounting complete with slideon/off lid and 2 DIN rail for up to 20pairs. Supplied empty, to be loadedwith External Connection Module 1B asrequired.

Used with Block Terminal 18A and 19A.A single pair gel-filled module

CONNECTORMODULE 1B

E2145

To provide protection when fitted toConnector Module 1B.

EXTERNAL PROTECTIONMODULE 2B

E2260

Used to attach Block Terminals 76series and Block Terminals 18A towooden poles.

Used to attach Block Terminals 86series and Block Terminals 19A towooden poles.

MOUNTING BLOCK TERMINAL

1AE2100

2AE2101

18A (20 PAIR) E2010

19A (10 PAIR)E2011

86AE2254

86BE2255

86CE2256

76AE2257

76BE2258

76CE2259

BLOCK TERMINAL 76 & 86

Block Terminals (Rocker Blocks),overhead cable distribution points 10 & 20 pair.

An external terminal block used forterminating 2 and 5 pair insulated cableconductors.

BLOCK TERMINAL66B

E2083

10 pair, with 12 metre tail


10 pair, no tail



20 pair, no tail


79


A one way snatch block type pulleyused during the erection of dropwire.

TENSIONER WIRE STAY

E2148

PULLEY DROPWIRE 4E2133

As Pulley Dropwire 4 but incorporatesa clam cleat.

PULLEY DROPWIRE 5E2134

A device designed to grip and pullaerial cable during its installation.

GRIP PULLINGAERIAL CABLE

RIGGING HEAD 1AE2033 RIGGING WEIGHT 1AE2034

A ratchet type tensioning tool usedduring the erection and recovery ofAerial Cables.

TENSIONER 2BE2079

INSULATOR STAY 2E2130

For use on overhead stays in proximityto power lines or suspension routes onjoint construction routes.

A lever operated tensioning tool fortensioning stay wires when ‘making-off”.

SLEEVE DROPWIREPROTECTION 2A

E2120

A 35mm PVC Sleeve used to protectconductors on Cable Dropwire frompossible damage caused by the sharpends of the strength members. Supplied in packs of 100

HOOK AERIAL CABLE NO. 1

E2086

A nylon coated steel hook for supportingAerial Cables.

Used on hollow poles when fittingdropwire.

Used with Rigging Head 1A this is an8kg sash weight.

2A (4-12MM)E2031

3A (3-9MM)E2032

DISPENSERDROPWIRE 2B

E2091

A tubular steel framed DropwireDispenser with an adjustabletensioning device to prevent overrun ofthe drum. The drum is held by meansof a spring loaded spindle.

DISPENSERDROPWIRE 1

E2092

A wheel version ofDispenserDropwire No 1 witha fold away handle.

TENSIONER WIRE(TURNBUCKLE)

E2061

Used for tensioning aerial suspensionwires.

CONNECTOR DROPWIRE

3BC6159

3AC6158

2AC6156A grease filled two wire straightthrough insulation displacementconnector designed for wire gaugesizes 0.5-0.9mm and Dropwire.

A half tap version of the ConnectorDropwire 2A. Designed for wire gaugesizes 0.5-0.9mm and Dropwire.

A 2 wire straight through insulationdisplacement connector. Designed toaccommodate copper wire gauge sizes0.8-1.14mm and Dropwire.

A half tap version of ConnectorDropwire 3A.

2BC6157

Galvanised stranded 3mm steel wireused for aerial cable suspension andstay wires.

CATENARY WIREE2060


80


A 10mm combination spanner, crankedat the open end at an angle of 25degrees. It is used to tighten thelocknut of Eyebolt Expanding 1A

SPANNERCRANKED

E2076

Galvanised steel hook plate for steelwires and lightweight cables.

HOOK PLATE

WIRE ROPE GRIPSE2064

Used for clamping steel wire strand.

WIRE THIMBLESE2065

Galvanised steel thimble for use withsteel wire strand.

CLAMP DROPWIRE

Used for fixing Dropwire at pole orpremises’ termination points. Length:430mm

Aerial dropwire clamp with extendedrelieved end and nylon protectivecoating. Used to anchor CableDropwiring in hollow poles.

CLAMP AERIALCABLE 2

E2088

Used to support Cable Aerial SelfSupporting combined, 10 pair 0.5; 20 pair 0.5; 5 pair 0.6 and 10 pair 0.6

CLAMP AERIALCABLE 4

E2089

Used to support Cable Aerial SelfSupporting combined, 50 pair 0.5 and10 pair 0.63

BRACKET 22E2084

A triangle metal fixture used for fixingClamps Dropwire on buildings andpoles.

BRACKET 32E2085

Similar to Bracket 22 but has anextended arm to give additionalclearance from gutterings and eaves.

EYEBOLTEXPANDING 1A

E2095

An overhead single point fixing bolt.Hole size required 8-10mmx 50mm deepRing Size 12mm

EYEBOLTEXPANDING 2A

E2096

An overhead single point fixing bolt.Hole size required 16mmx 95mm deepRing Size 14mm

10AE2090

6AE2139

HOOK PLATE OPENE2062

HOOK PLATE CLOSEDE2063

GRIP STAY POLEE2039

Used to terminate Wire Steel 7/2.00 atpole heads and for terminating lashedaerial cable where Wire Steel 7/2.00 isused, but not at power crossings.

GRIP WIRE SUSPENSION

GRIP INSULATORPOLE

E2037

Used for terminating Insulator Stay 2 topoles where stays have insulatorsinserted. Can also be used toterminate Insulator Stay 2 to poleswhere Cable PET or PETAL Aerial isused on power crossings.

GRIP STAY ANCHORE2038

Used to terminate Wire Steel 7/2.00 toAnchor Screw Stay, or to Insulator Stay 2when these are inserted in a stay. It isalso used to terminate lashed aerial cableusing Wire Steel 7/2.00 on the span sideof Insulator Stay 2 at power lines.

Used to terminate Cable PET or PETAL Aerial incorporating singlestrand suspension wire. Not to be used at power crossing.

GRIP WIRE SUSPENSION No1E2040

Used for terminating Cable PET and Aerial Cable except those thatincorporate Single Strand Suspension Wire.


Used for terminating Cable PET and Aerial Cable that incorporate Single StrandSuspension Wire on the span side of Insulator Stay 2 at power crossing.


Used for terminating Cable PET and Aerial Cable except those that incorporateSingle Suspension Wire, on the span side of Insulator Stay 2 at power crossings.

GRIP WIRE SUSPENSION No4E2043(E2043)


81

Used in conjunction with Nails Bondingand Washer Galvanised 19. Supplied inpacks of 25.

120mmE2045

160mmE2046


CAPPING STEEL

Steel capping for the protection ofcables. Sized by max. cable diameter.Length 2440mm for all sizes.

CAPPING 22E2112

PVC capping used for protection ofcables up to 19mm diameter. Length: 2440mm

CONNECTOR BENDNo1

E2052

Used for connecting Ducts to CappingSteel at distribution points.

ROD CLEARANCETELESCOPIC 7M

E2013

A telescopic fibre glass measuring rodused to gauge the height of dropwires.Maximum height measurement is 7metres. New markings.

CABLE HEIGHT METER (DIGITAL)E2252

This Cable Height Meter is a unique,handheld instrument, for measurementof cable sag, cable height distance,overhead clearances. It is a modernalternative to telescopic measuringpoles. It measures 6 cables and up toa height of 23m (75ft).

More models available on request.

STAPLES GALVANISED

Used to terminate cable suspensionstrands on Aerial Cables.

STRIPS ALUMINIUM WASHER GALVANISED

A set of 7 glass reinforced plastictubes. Each is 1 metre long and has aspigot and socket.

ROD CLEARANCECOMPLETE

E2124

A Galvanised Steel Nail used withWasher Galvanised 19 to secure leadstrip when cabling on walls.Supplied in 5kg boxes.

NAILS BONDINGE2143

Wooden plug for plugging holes.

PLUG CREOSOTEDE2055

CAPPING STEEL NO1E2113


45mmE2105

65mmE2106


WASHER GALVANISED 16E2006

Circular washer, used on Bolt Arm.50mm dia x 3mm thick, 18mm hole.

Used with Strips Aluminium and NailsBonding in connection with cabling onwalls and buildings. 1/4” hole x 16SWG.

Used on Bracket 28.Tubular 1 1/2”, fits 5/8” bolts.

Used on Bracket 28. Tubular 3/4”, fits 5/8” bolts.

Used on Brackets Extension. Tubular 2 1/2”, fits 5/8” insulator spindles.


E2005 E2007

E2008




Max Cable diameter 25mm





Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


07. External Underground Rods Duct & Accessories

Cable Pulling

Cable Guides

Ropes

Manhole Furniture

Lifting Keys

Propane Equipment

Resins & Compounds

Pressurisation

Closures

Sleeves

7 External underground 09.qxd 12/8/09 11:24 Page 1

84


RODS DUCT ROD DUCT 1 (FERRET) 3M X 25MM DIAMETERE3379

E3379

ROD DUCT 2 (FERRET) 2M X 25MM DIAMETERE3380

ROD DUCT 3 CONTINUOUS 250M X 24MM DIAMETERE3381

ROD DUCT 5 (FERRET) 2M METRE 13MM DIAMETERE3382

ADAPTOR ROD 1A

E3002

Joins the leading end of Rod Duct 3 tothe female end of Rod Duct 1 or 2

ADAPTOR ROD 2AE3003

Provides a male Rod Duct 3 thread atthe leading end of Rod Duct 1 or 2

ADAPTOR ROD 3AE3004

Connects a leader and follower to thefemale end of Rod Duct 1 or 2

ADAPTOR ROD 5E3005

A flexible spring type adaptor used tojoin the female end of Rod Duct 1 or 2to the female half of Coupling-up-pieces

ADAPTOR ROD 7E3006

Connects Rod Duct 1 or 2 to Rod Duct 5

ATTACHMENT ROD 1A

E3010

A combined Leader & Follower with amale thread. For use on the femaleend of Rod Duct 5.

ATTACHMENT ROD 2A

E3011

A combined Leader & Follower with afemale thread for joining to the maleend of Rod Duct 5.

ATTACHMENT ROD 3A

E3012

Used with Rod Duct 5 as a RodLeader. It incorporates a spring forrodding through “T” couplings.

ATTACHMENT ROD4A BULLET END

E3013

Used with Rod Duct 3 as a Leader orwhen used with Adaptor Rod 2A or 3Aas a Leader or follower with Rod Duct1 or 2.

FERRETCOUPLING UP PIECE(FERRET - LOCKFAST)

LOCKFAST

A - No 1 (SMALL)E3194

B - No 2 (MEDIUM)E3195

C - No 3 (LARGE)E3196

D - No 1 (SMALL)E3197

E - No 2 (MEDIUM)E3198

F - No 3 (LARGE)E3199

Used for marrying Rods within a Duct.

A B C D E F


85


COUPLING RODDUCT 3 FEMALE

E3190

A terminating fitting to provide a maleRod Duct 3 thread at the end of a RodDuct 3 Leader Rod.

COUPLING RODDUCT 3 MALE

E3191

A terminating fitting to provide a maleRod Duct 3 thread at the leading endof Rod Duct 3

COUPLING ROD DUCT 3 MALE SWIVEL

E3192

Provides a rotatable male Rod Duct 3thread at the leading end of Rod Duct3. Can also be used to repair RodDuct 3.

COUPLING RODDUCT 3 REEL

E3193

Used to attach the inner end of a RodDuct 3 to its storage reel.

GRIP COUPLING 1AE3014

Grip Coupling 1A is designed to assistthe threading of 25mm diameter subduct by stiffening the leading end. Itcomprises of a BT coupling with 3metres long fibre glass rod, whichscrews into the sub duct.

ROD ONLY

ROD CONTINUOUS

ROD & CAGE SIZE

E3355 E3356 6mm x 60m

E3357 E3358 6mm x 100m

E3359 E3360 6mm x 120m

E3361 E3362 6mm x 150m

E3363 E3364 9mm x 100m

E3365 E3366 9mm x 120m

E3367 E3368 9mm x 150m

E3369 E3370 9mm x 200m

E3371 E3372 11mm x 100m

E3373 E3374 11mm x 150m

E3375 E3376 11mm x 200m

E3377 E3378 11mm x 250m

E3405 E3406 11mm x 300m

E3510 E3511 14mm x 150m

E3512 E3513 14mm x 200m

E3514 E3515 14mm x 250m

E3516 E3517 14mm x 300m

E3518 E3519 14mm x 350m

Rods Continuous (also known as Cobra’s) supplied on wheeled metal cages or asrods only. Fittings available separately. 4mm size rods also available.

GUIDE TIP

Replacement guide tip for RodsContinuous

Replacement Flexible Guide Tip forRods Continuous

GUIDE TIP FLEXIBLE

6MM RODSE3385

9 & 11MM RODSE3386

9 & 11MM RODSE3384

END CONNECTOR

Replacement End Connector for RodsContinuous.

Replacement middle connectors suppliedcomplete with adhesive. Adhesive canalso be purchased separately.

ROD CONTINUOUSREPAIR KIT

6MM ENDE3387

9MM MIDDLE CONNECTORE3390


ADHESIVE 3MLE3525

9MM ENDE3389

11MM ENDE3391



86


STRAPPING STEELE3412

5mm wide x 25 metre longgalvanised strip used to fit bagsgrip to duct motors

BUCKLE STRAPPINGSTEEL 5MM

E3411 AIR COMPRESSORE3009

A portable Air Compressor for use withDuct Motors and associated products.

DUCTING

Ducts are supplied in grey or blackcolour and 6 metre lengths. They canbe cut to required length. A wide rangeof accessories such as collars, bends,reducers etc. available.

GLAND CAULKING 2E3213

Use in the sealing of Duct 54D inconjunction with Disc Caulking 1 andCompound 16A.

DUCT REPAIR KIT 3AE3040

GLAND CAULKING 3

E3214

Used in the sealing of Duct 56 inconjunction with Disc Caulking 4 andCompound 16A.

DISC CAULKING

Used with Glands Caulking andCompound 16A. Two required per gland.

DUCT MOTOR 2BE3210

Used to place Drawrope and lightcabling ropes in ducts.

REEL HOSE 6E3342

Portable hose (300M) reel suppliedcomplete with wheeled trolley andwinding handle. Use with Duct Motor 2B.

BAGS GRIP

For use with Duct Motor 2 & 2B

DISC CAULKING 1E3204

DISC CAULKING 4E3205

BAG GRIP 4 - MEDIUME3016

BAG GRIP 5 - SMALLE3017

BAG GRIP 6 - LARGEE3018

Duct size: 51mm bore ductMANDREL NYLON

Nylon Mandrel with pulling eyes ateach end are used to prove the boresof duct for either damage ormisalignment. The size to be ordered is according tothe diameter of the duct.

43mmE3305

Duct size: 76mm bore duct70mmE3306

Duct 54D (89mm ID)E3530

Duct 56 (49mm ID)E3531




122mmE3311

137mmE3312

142mmE3313


Galvanised Buckles with a 5mm eye.Used with Strapping Steel to fit BagsGrip to Duct Motors.

BRUSH CYLINDRICAL

A cylindrical bristle brush for cleaningduct bores. • Length: 350mm

51mm bore duct

BRUSH CYLINDRICAL 57mmE3033

76mm bore duct


83mm bore duct


90-92mm bore duct


102mm bore duct



Used for repairing Ducts 54D (90mmduct). Consists of Duct Split Inserts,Duct Liners and Straps Cable Fixing10A.


87


CONNECTORSWIVEL 22MM

E3189

Used in conjunction with Cable Gripson Optical Fibre Cables that do notcontain a central strength member.

CONNECTOR SWIVELNO 1 (32MM)

E3188

Used with varying sizes of Grips CableSingle Eye to join Cables to RopeCabling 4. Consists of two swivellingforks with removable clevis pins.Overall length 7”.

CONNECTORSWIVEL CSM

E3187

Used when installing Fibre OpticCables containing a central strengthmember.

LINK CABLING 1E3301

Used to attach cable grips to RopeCabling. • 8mm diameter• Dimensions: 37 x 88mm • Rope size: 19mm • SWL 980 kg

LINK CABLING 2E3302

A larger version of Link Cabling 1, foruse with large ropes. • 10mm diameter• Dimensions: 45 x 105mm • Rope size: 21mm• SWL 1000 kg

LINK KEYSTONE 1/2”E3303

A figure of 8 high tensile steel link witha quick release facility. Dimensions: 44 x 81mmEye: 19mm

SPIKES CABLING

For use when drawing-in cable.

GRIP THREADED

Threaded Grips are attached to thesub-duct prior to pulling. They have aneye at each end, one eye for attachinga Connector Swivel and the other forsecuring pre-installed rope.

SUBDUCT PULLINGSLING

CUTTER SUBDUCTE3209

A circumferential cable cutter for useon Sub-duct

24-29MM IDE3237

29-37MM IDE3238

SUB-DUCT PULLING SLING 3 LEGE3416

SUB-DUCT PULLING SLING 4 LEGE3417

Ratchet action subduct cutter withhardened steel blade. Ratchet & levermechanism will cut subduct, conduit &plastic extrusions up to 42mm withoutcrushing. Low cost version

CUTTER SUBDUCTE3200

SHACKLE

Large bow shackle pin, diameter 1”,throat width 1 5/8”, throat depth 3 7/8”,SWL 2794 kg. Used for generalpurpose lifting and pulling

SHACKLE 1E3397

Large bow shackle, 1 1/4” x 2” x 4 7/8”,SWL 4826 kg. General purpose liftingand pulling.

SHACKLE 2E3398

Small ‘D’ shackle with mole ploughs, 1”x 1 3/8” x 3 1/4”, SWL 3556 kg.

SHACKLE 10E3399

Small “D” shackle, 5/8” x 1 1/8” x 21/8”, SWL 762 kg. Used with AerialCabling Units.

SHACKLE 12E3400

A light weight, heavy duty Snatch Blockcomplete with hook. 6” diametersheave to suit 12 - 14mm wire rope. SWL: 2 tonne.Proofload: 4 tonne. Other sizes available on request.

BLOCK SNATCH 2”E3448

Size: 9" x 3/8". Cable diameter 1/2" - 3/4"

SPIKE CABLE 1E3455

Size: 9" x 3/8". Cable diameter 1/2" - 3/4"

SPIKE CABLE 2E3456

Size: 9" x 5/8". Cable diameter 1- 1 1/2"

SPIKE CABLE 3E3457

Size: 9" x 3/4". Cable diameter 1 1/2" - 2"

SPIKE CABLE 4E3458

Size: 12" x 1". Cable diameter 2" - 2 1/2"

Size: 12" x 1 1/4". Cable diameter over 2 1/2"

SPIKE CABLE 5E3459

SPIKE CABLE 6E3460


88

SINGLE EYE CLOSED 1/4” 6-13MM


GRIPS CABLE

All grips consist of wire mesh tubes with either one or two pulling eyes at one end.The Single Eye Closed Grip is placed over the end of the cable. The Double EyeOpen Grip is slid along the length of the cable and repositioned accordingly and theSingle Eye Split is wrapped around the cable and closed using the steel rodsupplied with the grip. When using these Grips the tension applied to the eyescauses the mesh tubes to reduce in diameter and so grip the cable tightly, allowingdrawing in operations to be carried out.

We also offer 2 types of Recover Grips. First type is made to the full BTSpecification with a strong wire and brass tips. The second type is an excellentquality but lower cost solution without brass tips.

E3216

SINGLE EYE CLOSED 1/2” 13-19MME3217

SINGLE EYE CLOSED 3/4” 19-25MME3218

SINGLE EYE CLOSED 1” 25-38MME3219

SINGLE EYE CLOSED 1 1/2” 38-51MME3220


SINGLE EYE CLOSED 2 1/2” 63-76MME3222


FLEETING DOUBLE EYE OPEN 1” 25-38MME3224

FLEETING DOUBLE EYE OPEN 1 1/2” 38-51MME3225

FLEETING DOUBLE EYE OPEN 2” 51-63MME3226

FLEETING DOUBLE EYE OPEN 2 1/2” 63-76MME3227

FLEETING SINGLE EYE SPLIT 1 1/2” 38-51MME3229

FLEETING SINGLE EYE SPLIT 1” 25-38MME3228

FLEETING SINGLE EYE SPLIT 2” 51-63MME3230

FLEETING SINGLE EYE SPLIT 2 1/2” 63-76MME3231

GRIP RECOVERY 2 (BRASS TIPS) 44-57MME3233




GRIP RECOVERY 1 31-44MME3466




CABLERECOVERY

(BRASS TIPS)

FLEETING DOUBLE EYE OPEN

CODE ITEM CABLERANGE DIAMETER

SINGLE EYE CLOSED

A pre-stretched cabling rope used onself tailing winch systems. It isimportant to note that this rope is not tobe used on hand tailed winches.Supplied on 250 metre reel, 10mm in diameter.

This is a low stretch high strength13mm rope manufactured of man-made fibre with an eye splice ateach end. Used for undergroundcabling work. Kevlar/Bond rope.

ROPE CABLING 1E3393

Small plastic tool used for the Splicingof Ropes Cabling.

ROPE CABLING 4 SPLICING FIDE3212

ROPE CABLING 4 100mE3394



DRAWROPE NO.1E3490

A 3 strand polypropylene drawrope withplain ends used for light cabling work. • Supplied on 500m reel, 6mm in

diameter, weight 9.8kg, max load 550 kg.

SLICK LINEE3489

8kN rope for use in subduct. Supplied on3660 metre reel.

Used to dispense and recoverDrawrope No 1.

STAND DRAWROPEE3491DISPENSER “A” FRAME

E3206



89


Used to guide Cables from the drum tothe duct mouth on light cabling work.

GUIDE CABLING 1E3242

Used on 89mm & 92mm bore ducts todraw the cable straight into the ductand for cabling through jointingchambers with duct tracks in line.

GUIDE CABLING 13AE3249

Comprises of a wheel supported on an‘A’ frame fitted with an adjustable Clamp.Used to turn Cables of less than 32mmdiameter in surface jointing chambers togive an angular deviation of approx 90degrees in the horizontal plane.

GUIDE CABLING 4

A flexible tube used for heavy cablingwork. These guides can be connectedtogether to extend the duct entry to thecable drum trailer. Used withBellmouth 1A.

Clamp type box edge roller guide, usedwith light ropes and Cables inconjunction with Clamp Guide 2A.


GUIDE CABLING 6


Used on 89mm & 92mm bore ducts todraw cable into the duct at an angle,and for cabling through jointingchambers with duct tracks not in line.The angular deviation to be less than30 degrees.


Used to turn Cables of less than 78mmdiameter in manholes and chambersfitted with anchor points, throughdeviations of up to 135 degrees.


ROLLER ROPEGUIDING SURFACE

E3119

Used to avoid damage to drawropesand cabling ropes when drawing out ofjoint boxes.

GUIDE CABLING 17AE3254

Used to guide steel wire ropes andstandard cabling ropes in or out of ductmouths.

BELLMOUTH SPLIT

Used to protect Cables when drawing in to Ducts. Consists of a two part tubularsleeve which is assembled over the Cable and joined together by two Wing Nuts.

For use on 83mm ducts

4A (3M LONG)E3244

4B (1.5M LONG)E3245

6A 1.7M LONGE3247

BELMOUTH SPLIT 1E3020

For use on 90-92mm ductsBELMOUTH SPLIT 2E3021

6B 3.4M LONGE3248

For use with Guides Cabling 6A and6B.

BELLMOUTH 1AE3019

An extendible compression strut usedto clamp Guides Rod Flexible 3 and 4and guide cabling 5 into joint boxes.

CLAMP GUIDE 2AE3072

A swivelling box roller which is used toguide steel wire ropes over the jointingchamber frames

GUIDE RODFLEXIBLE 3

E3255

For use with mounted rodding systems as aguide and rope guard when winching withRod Duct 3. Consists of a 3 metre flexibletube with one plain end and the other with afitment for connection to either the roddingmachine or Guide Rod Flexible 4.

GUIDE RODFLEXIBLE 4

E3256

As Guide Rod Flexible 3 but with onefitment to accept Guide Rod Flexible 3and the other to connect to the roddingmachine. These guides are joinedusing Clamp 13A.


90


Used to fix Brackets Cable Bearer toCable Bearer Wall Type.

PINS LOCKINGCABLE BEARER

E3322

STEP MANHOLE NO.1E3408

Cable Bearers Wall Type are used for supporting Cables in manholes and JointBoxes. They are fixed to the wall of the chamber/Joint Box to accommodate theBracket Cable Bearers. The type numbers shown indicate the number of Bracketsthe Bearers will carry.

CABLE BEARER WALL TYPE

TYPE 2 279MME3042

TYPE 1 178MME3041

TYPE 5 813MME3044

TYPE 3 508MME3043

TYPE 8 1270MME3045

TYPE 10 1574MME3046

TYPE 12 1879MME3047

The Bracket Cable Bearers are fixed to the Cable Bearer Wall Type by means ofthe Pins Locking Cable Bearer. They are manufactured of galvanised cast iron andare designed to support all types of multicore cables and closures.

Manhole step for use in brick built andconcrete manholes.

STEP MANHOLE NO.2E3409

Replacements for missing or brokensteps in manholes. Fixed tounderground walls with Bolt Expansion1A.

BRACKET CABLE BEARER

TYPE 5 170MME3028

TYPE 3 150MME3027

TYPE 12 350MME3030

TYPE 8 250MME3029

TYPE 18 500MME3031

TYPE 24 650MME3032

BOLT FOUNDATIONINDENTED NO.1

E3024

Foundation Bolt for use in CabinetsCross Connection work. • Size of bolt: 6” x 5/8”.

BOLT FOUNDATIONINDENTED NO.2

E3025

Bolt for fixing Cable Bearer Wall Typesin underground chambers.

BOLT EXPANSION 1AE3026

Bolt to fix Cable Bearers and StepsManhole No 2 in existing joint boxesand manholes. • Size of bolt: 1/2 “ x 2 3/4 “

IRON ANCHOR 4E3260

Used on jointing chamber walls andceilings to hold Cable Guides.Designed for use on concretestructures where embedded into thewall.

STUD EXPANDING 1AE3023

Expanding bolt for attaching Plate Wall5 and Brackets to walls. Supplied inpacket of 100.

GRATING SUMP 2AE3215

A PVC drainage sump for use inManholes and Joint Boxes. Size250mm x 250mm.

JOINT BOX

Underground Jointing chambermanufactured from prefabricated glass reinforced polyester.


JOINT BOX 23E3262


JOINT BOX 26E3263

COVER JOINT BOX 23E3075

A cast iron lid for use with Joint Box 23.

CODE TYPE OVERALL LENGTH CODE TYPE OVERALL LENGTH


91


KEY 9752E3265

Standard lifting key for use onheavy/medium non-locking covers, canalso be used for the lifting of lockingheavy duty Broadstel.

MULTI-HEAD LIFTING KEYE3298 KEY PIT LIFTER 20”E3264

KEY 9753E3266

Standard lifting key for use on lightduty non-locking covers and also thelifting of pedestrian duty Broadstel.

KEY JOINT BOX 2E3267

Used to remove the covers of jointboxes with the exception of types 21and 22. Is also suitable for use onFrame & Cover Unit Type Light andFrames & Cover Carriageway 4. It is alever action key where the handleincorporates a chisel point for cleaningcover key holes and channels.


This is a long handled version of KeyJoint Box 2 which enables the user tolift the cover in a standing position.


As Key Joint Box 4, but includes anadditional hinged arm which positionsunder the opened pit lid offering addedsecurity and safety.

KEY LIFTINGMANHOLE COVER

E3271

A “T” shaped steel lifting key for use oncircular, oval “woods” type andtriangular carriageway manhole covers.It also incorporates an eye so that acrowbar may be used to assist lifting.

KEY CARRIAGEWAY 2AE3270

A “D” shaped lifting key for use on Etype and units type covers of squareand rectangle shape. The keyincorporates an adjustable locking nutwhich bears against the frame to lift thecover. To be used in pairs.

KEY PILLARE1119

A multi purpose triangular shaped keyfor use on hollow poles doors CabinetsCross Connection, Pillars Distributionand Posts Jointing.

Replacement Hook for Key Joint Box 2,4 & 5.

HOOKE3476

BOLTS & NUTSE3477

FRAMES AND COVERS CARRIAGEWAY

Ductile iron manhole cover and frame with closed keyways, manufactured to BSEN 124 Class D400kN, HA104/02 Compliant, Kitemarked, Black bitumen coatedand Non-Rock 3 point suspension. Optional Extras: Badging, Locking, Safety grids, Security plates, ventilated

Dept (mm): 150 Clear Opening (mm): 600 x 600 Overall Size (mm): 750 x 750

FRAME & COVER CARRIAGEWAY 1E3541






92


LIFTER MANHOLE COVER 4AE3291

A hydraulic type lifter usedfor lifting all types ofcarriageway covers. Arange of different keys canbe fitted to suit the type ofcover to be lifted. The lifteris used by attaching themain beam to the manholecover via the appropriatelifting key and operating theram with a pump action. Arelease valve isincorporated to lower thecover back into position.

The lifter comes complete with a ramoperating handle, a lifter manoeuvringhandle and carrying handle. Thefollowing keys and replacement partscan be ordered separately.

PART 2AE3293

PART 1AE3292

PART 3BE3294

PART 4AE3295

PART 5CE3296

Used in pairs to lift Elkington typemanholes covers.

Used in pairs to lift old types ofmanhole covers.

Used in pairs to lift unit type manholescovers.

Used in pairs for lifting Unit Type LightCovers and Covers Driveway.

Used for lifting triangular type coverssuch as Silent Knight and CoversCarriageway C and D. These keysshould be ordered in sets of 6 cater forthe largest installation of 6 pairs ofcovers.

Consists of:• Propane Torch• Propane Regulator• Propane Nozzle C• Propane Coupling Blank• Propane Coupling Nut & Tail• Propane Spanner• Propane Hose High Pressure• Propane Hose Clips

PRPANE KITCOMPLETE

E3344

Designed to accommodate a number ofdifferent nozzles dependant on the typeof operation.

PROPANE TORCHE3325PROPANEREGULATOR

E3326

PROPANE NOZZLES

Designed to reduce the gas cylinderpressure to the required workingpressure of 8 psi for both PropaneTorches and Propane Stoves.

PROPANE COUPLINGS

PROPANE SPANNERE3334

Propane Spanner

PROPANE HOSE HIGH PRESURE

E3335

A special reinforced 4.7mm ID highpressure hose

PROPANE HOSE CLIPE3336

Used to terminate Hose High Pressureonto the Propane Regulator

PROPANE LIGHTER1A

OTHERPROPANE

ITEMSAVAILABLE

E3337

This lighter does not require refills buthas a design life of 20,000+ operations

NOZZLE AE3327Produces a fine pencil flame 5” long,3/8” diameter. Most suitable forsoldering small items.

NOZZLE BE3328Produces a large intense flame 6” long,1” diameter. A general purpose nozzle

NOZZLE DE3330Produces a fine soft flame 5” long,9/16” diameter. Normally used on theshrink-down ports of multi-entry collars.

NOZZLE CE3329Produces a very large but soft flame 8”long, 2” diameter. For general use onthe larger sizes of shrink-down closures.

(A) COUPLINGE3331Used with Regulator Propane andHose Propane

(B) COUPLING BLANKE3332Used to blank off an unused outlet onthe Propane Regulator.

(C) COUPLING NUTE3333Used to fix both the Propane Couplingand Propane Coupling Blank to thePropane Regulator

A

B

C

A

B

CD


93


RESIN PACK 2E3346

Used to make gas seals inpolyethylene sheathed cables witheither polyethylene or paper insulatedconductors.

RESIN PACK 6BE3347

Resin for sealing the base of CabinetsCross Connection 1 and 3.

RESIN PACK 7BE3352

Used for sealing ducts not fitted with acaulking gland, against the ingress ofgas and water.

RESIN PACK 9BE3348

Used for sealing cables in the base ofsleeves 30A, 31A and 32B.

RESIN PACK 10AE3349

Used for sealing sleeves 30A, 31A and32B. Very hard/ permanent sealant.

Applicator gun for use with Resin 14.

RESIN GUN 14 E3351

Non-foaming 2 part for sealing verticalducts.

RESIN PACK 14BE3350

A pliable compound for use whensealing Ducts. Supplied in 1kg sticks.

COMPOUND 16AE3160

Black Compound for sealing aroundjunction boxes, service cable entriesand many other similar applications.Easy to use, forms around irregularsurfaces and configurations, highlyresistant to cracking, drying andshrinking. Supplied in 5 x 1b blocks.

COMPOUND DX5E3162

A PVC solvent for jointing Duct 54D inexchange and building lead-ins.

COMPOUND 21AE3161

DESICCANT PACK 3E3203

Used in underground cable joints.Contains 2 x 13g bags.

Used to dry out cable joints. Used to dry out unventilated CabinetsCross Connection. 140g pack.

DESICCANT PACK 2AE3202DESICCANT PACK 1E3201

4021M SINGLE HEADE3453

4021M2 DOUBLE HEADE3454

3M JOINTING KIT

Splicing rig designed for in-line and teeing in jointing. Available in kitform with either one or two splicing heads. A standard kit contains:

* Case* Crimper* Splicing Head (1 or 2)* Adaptor Test 17A* Inserter Wire 12A* Comb Checking 25 Pair

* Splitter Connector 25 Pair* Splicing Head Pedestal* Pedestal Clamp* Traverse Clamp Assembly* Short Traverse Bar* Support Tube Assembly


94


CONNECTOR BENDNO.4

E3174

Used to connect Duct 102 or Duct 56to Cover 101A on Housing Estates.

BLANKET CABLEPROTECTION

E3022

A heavy duty felt material used toprotect surrounding Cables whenundertaking propane type work.Dimensions 1200mm x 1200mm.

SLEEVING 12

Manufactured from PVC, used withBush Trunking 1.

LUBRICANT CABLE2A

E3304

This lubricant reduces the frictionbetween the Cable and duct walls.Supplied in 20 litre containers.

CLAMP 1AE3550

Used to ensure safe opening ofCabinets Cross Connection 2 and 3. Itallows the doors to be opened or closedby means of the cranked handle.

TECHLUBE

Water based Cable Lubricant,alternative to Lubricant Cable 2A.

PUMP LUBRICANT 2AE3340

A hand operated Pump used forapplying Cable Lubricant to Cable orsub-duct during installation.

Used to bind Cable Supports andAnchors Cable underground

Used to provide a temporarywaterproof closure when working onunderground Cables. Can be used on both grease filled and pressurised Cables. Supplied on a roll 8 yards x 27”

STRIP BINDINGE3413

Clip used with strip binding

CLIP BINDINGE3414SHEET RUBBER SELF ADHESIVE

E3401

SLEEVING 12/15mm IDE3402

SLEEVING 12/22mm IDE3403 TECHLUBE FO (STANDARD)E3418

TECHLUBE HD (HEAVY DUTY)E3419

GAUGE PRESSURE 2E3444

Used in Cabinets Cross Connectionwith local Cables that are permanentlypressurised. A 76mm contact gaugewhich reads 0-650mbars.

Used to test pressure in Cable Joints.It is a horizontal type Desiccator whichincludes a Footpump and PressureGauge and is supplied complete withcase and carrying handle.

DESICCATOR 2AE3208

Used with compressed air cylinders tosupply air to pressurised telephonecables. It is a two stage pressurereduction which delivers 1 cubic ft of airat 10 psi irrespective of cylinderpressure. Fitted with two gaugesreading 0-4000 psi and 0-30 psi.

REGULATOR AUTO AIR

E3343

KIT 267AE3273

KIT 267A WITH 1 METRE TAILE3273-1

RIVETTER 1AE3345

A hand operated tool used to fitmoisture barrier kit 267A.

MOISTURE BARRIERKIT 267A

This kit is used to make moisturebarrier connections. It comprises a rivetwasher and wire connector. It is alsoavailable with 1 metre tail.


95


Heat shrinkable plastic End Caps usedto seal the ends of Cables onunderground installations. A range ofsizes are available to suit the particularsize of Cable.

CAP SEALING 16

Used for making air blocks in plasticinsulated terminating Cables. 6 sizesavailable.

Used to provide air inlets onpressurised cables, incorporates ValveAir 5 to enable test pressure readingsto be taken.

CONNECTOR / VALVE AIR HEATSHRINKABLE

CLAMP 7A/1E3066

CLAMP 7A/2E3067

CLAMP 7A/3E3068

CLAMP 7A/4E3069

CLAMP 7A/5E3070

CLAMP 7A/7E3071

CLAMP 7A

Used to supportthe range of Cones Airblock

Used with Cones Airblock No 1

Used with Cones Airblock No 2, 3 & 4





Max Cable Diameter: 40mmMin Cable Diameter: 16mmSleeve Length: 250mm

TUBING PLASTIC FLEXIBLE 20mmE3425






TUBING PLASTIC FLEXIBLE

Used when leading polyethyleneinsulated conductors from MDF airblocks. Supplied in varying diametersbut all are 20 metres in length.

1AE3435


1BE3436


1CE3437

VALVE AIR 1E3432

CAP SEALING 16AE3048

CAP SEALING 16BE3049

CAP SEALING 16CE3050

CAP SEALING 16DE3051

CAP SEALING 16EE3052

CAP SEALING 16FE3053

CAP SEALING 17CE3054

CAP SEALING 17DE3055

CAP SEALING 17EE3056

CAP SEALING 17FE3057

CONES AIRBLOCK

CONES AIRBLOCK 1E3163






5-8mm

8-11mm

11-17mm

17-30mm

30-50mm

Heat shrinkable plastic end cap fittedwith an air valve, for use where airpressure check is required. As withCap Sealing 16 series a range of sizesare available.

CAP SEALING

50-90mm

11-17mm

17-30mm

30-50mm

50-90mm

Supplied complete with Air Check, Capand Sealing ring, for use on cablepressurisation.

VALVE AIR 5E3433

Supplied complete with Air Check, foruse Sleeves PE , 4, 6, 8, 9 and 10

VALVE AIR 6E3434

Used with Connector Cable Air 1A onpressureised lead cables andconnector Cable Air 2 on pressurisedpolyethylene cables.

This Adaptor allows the engineer tomake a pressure test point where cablejoints are fitted with a Valve Air No 1.

ADAPTOR VALVE AIR 1

E3007


96


A dual purpose tool which is used torepair the inside and outside threads ofValves Air and can also be used toremove air checks.

TOOL VALVE AIRREPAIR

E3422

Contains an aluminium foil moisturebarrier. Used on cable pressurisationwork.

PVC sheathed aluminium tubing usedto connect pressurised Cables toflowmeters and pressure gauges.

TUBINGPOLYETHYLENE 1/4”

E3431TUBING ALUMINIUM1/4”

E3423

Used with 1/4 “ polyethylene &aluminium tubing when supplying airfor pressurised cable systems.Used with polyethylene tubing.

A thumb lock lever type connector foruse with Desiccator 2A.

NUT SEAL CAPTIVE1A

E3323

QUICK CONNECTCHUCK

E3062

A brass connection valve for use oncable pressurisation.

Used with 1/4 “ polyethylene &aluminium tubing when supplying airfor pressurised cable systems.Used with aluminium tubing.

NUT SEAL CAPTIVE1C

E3324

NO LOSS CHUCKE3061

ADAPTORCONTRACTOR 2C

E3001

Used on the outside of Cable Sheathsor Cable Joints to allow the fitting ofContractor Pressurised Cable No 2.

CUTTER DISK PE SHEATH

E3078

Used to bore holes in the sheath of PEsheathed cables.

SHAVE HOOKE3407

A hand tool with a heart shaped bladefor use when removing the oxide layeron the sheath of lead cables.

KEY SPINDLEE3272

A single ended ring Spanner with asquare hole. Used to open and closethe valve on commercial compressedair bottles.

Used to connect ConnectorCompression 1 to Valves Air.

ADAPTOR VALVE AIR 2

E3008

1/4” X 1/4” X 1/4” TEEE31771/4” X 1/4” ELBOWE3175

3/8” X 3/8” ELBOWE3179

CONNECTOR COMPRESSION 1

Used on pressurised Cables for connecting the tubing used to distribute the pressurised air.

1/4” X 1/4” STRAIGHTE3176



3/8” X 3/8” X 1/4” TEEE3181

IRON CONICAL 2AE3261

This implement is heated to makeholes of up to 36mm diameter inSleeves 30A, 31A & 32B. Overall length is 420mm.


97


Min Cable Diameter 6mmMax Cable Diameter 33mmMax Joint Gap 320mmMax Joint Diameter 33mmOverall Joint Length 550mm

KIT JOINT CLOSURE 1

A heatshrinkable non-pressurised closure kit which provides a highly flexible joint closure for the distribution network providingfor up to three Cables in and out of the joint. The wrap around feature makes it ideally suited for maintenance where existingjoints must be replaced and for new works where the flexible clip branch out method gives planners the ability to cope with anyCable size from 2 to 100 pair lead or polyethylene sheathed, filled or unfilled Cable.

KIT JOINT CLOSURE 2

KIT JOINT CLOSURE 1AE3274


KIT JOINT CLOSURE 1CE3276


KIT JOINT CLOSURE 1BE3275

Max Joint Diameter 43mmMin Cable Diameter 6mmMax Joint Gap 210mmOverall Joint Length 455mm






These heatshrink kits are suitable for one in, one out joints of up to 100 pairs. Theheat shrink tubing used has temperature indicating paint on the surface of thesleeve. This helps the jointer make an effective seal by ensuring that the adhesivereaches the correct temperature to flow.

Min Cable Diameter 62mmMax Joint Gap 15mmMax Joint Diameter 500mm

KIT JOINT CLOSURE 4







KIT JOINT CLOSURE 4DE3287


KIT JOINT CLOSURE 4EE3288


KIT JOINT CLOSURE 4FE3289


KIT JOINT CLOSURE 4GE3290This range of wrap around closures is manufactured of a unique glass fibre reinforced heatshrinkable composite material, whichgives an excellent split resistance during installation and superior mechanical toughness. These closures have built in visualindicators to ensure optimum installation under the most severe conditions. Installation is quick and easy using only a standardgas torch. The closure is completely wraparound allowing it to be used for both new works and maintenance on ducted ordirect buried cables with polyethylene or lead sheathing up to 4800 pairs.

KIT JOINT CLOSURE CAP ENDED

These are general purpose singleended closures designed for a varietyof applications in the distributionnetwork. They are suitable as an aerialor underground closure for both newconstruction and maintenanceapplications, typically rehabilitation oftap and plug expanding joints. Can beinstalled quite simply by means of astandard jointers torch. Can be usedon cable sizes in the range of 2 to 100pairs accommodating up to 3 cableconfigurations.

Max Diameter 38mmMin 10mmDiameter 150mmBody Length 265mmOverall Sleeve Length 35mmMax Joint Diameter

KIT JOINT CLOSURE CAP ENDED 1AE3277


KIT JOINT CLOSURE CAP ENDED 1BE3278


KIT JOINT CLOSURE CAP ENDED 1CE3279


KIT JOINT CLOSURE CAP ENDED 1DE3280


98


Polypropylene domed sleeves complete with polycarbonate screw type clamps forjointing underground or overhead. Order separately Connectors 8A-1 2 wire jellycrimps and Resin Pack 9B and if required Brackets Universal to fix Sleeves topoles or wall.

SLEEVE 30A, 31A & 32B

SLEEVE 30AE350050 pair

SLEEVE 31AE3501100 pair

SLEEVE 32BE3502200 pair

SLEEVE 32KE3505

DUCT INFLATION TOOLE3480

TDUX KITS

Inflation Tool for use withTDUX (various sizes). Aunique inflatable wraparoundduct seal systempermanently sealingtelephone cable ducts, toprevent leakage of waterfrom the duct into exchangevaults or manholes. Suppliedin smart blue carry case.The Inflation Tool used CO2Gas Cylinders and TDUXKits to be orderedseparately.

GAS CYLINDERSE3481

Gas Cylinders CO2 for Duct InflationTool. Supplied in boxes of 10.

There are various TDUX kits available for use with the Duct Inflation Tool. These are to be ordered separately and are as follows:-

TDUX-45 32.5 45 0-14 0-32E3482

TDUX-60 45 60 0-18 0-45E3483

TDUX-75 55 75 0-28 0-56E3484

TDUX-90 60 100 0-22 0-83E3485

TDUX-100 45 110 0-45 0-90E3486

TDUX-125 110 125 0-83 0-103E3487

CODE ITEM DUCT INSIDE CORRESPONDING OUTSIDE DIAMETERDIAMETER RANGE RANGE FOR 1 OR 2 CABLES

MIN MAX IN MIN. DUCT IN MAX. DUCT

200 pair polypropylene domed Sleevewith polycarbonate clamp,incorporating 7 re-usable ports usingheatshrink tubing. Port sizes 3 x 28mm2 x 18mm1 x 36mm 1 oval port 30 x 60mm. Order separately straight heatshrinktubing 41-12mm and 70-32mm.

SLEEVE 31CE3504

100 pair polypropylene domed Sleevewith polycarbonate clamp,incorporating 7 re-usable ports usingheatshrink tubing. Port sizes 4 x 17mm2 x 26mm1 x 12mm. Order separately straight heatshrinktubing 28-6mm and 41-12mm.

UNIVERSAL BRACKETE3506

Used to fix sleeves to poles or wall

SLEEVE 30DE3503

50 pair polypropylene domed Sleevewith polycarbonate clamp,incorporating 7 re-usable ports usingheatshrink tubing. Order separately straight heatshrinktubing 28-6mm.

CLAMP 10AE3063

Used for securing Cables in Sleeves30A, 31A and 32B whilst pouring resin.



Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


08. Tools General Hand Tools

Cable Strippers

Inserters

Outriggers

Toolboxes

Soldering Irons

Wire Wrap Tools

Fibre Tools

Coax Tools

8 General Hand tools 14/8/09 17:02 Page 1

100

08. Tools

NIPPERSMINIATURE NO 1

W1001

Side cutter, of a cutting capacity of upto 1.5mm copper wire.Length: 113mm

PLIERS WIRING 2W1020

Wiring pliers with serrated jaws andtaper nose.Size: 140mm (51/2”)

NIPPERS DIAGONALCUTTING WITH SPRING

A lever assisted side cutter with returnspring. Handles are not sheathed

Used to crimp Connector WireInsulated 8 series. It is a scissor actiontype plier, spring assisted with a cuttingblade.

PLIERS CRIMPING 8BW1028

Used to crimp Connector WireInsulated 11 A.Length: 145mm.

PLIERS CRIMPING 11AW1029

A general purpose pipe plier for usewith pipework and gas fittings.

PLIERS GAS 7”W1030

NIPPERS DIAGONAL CUTTING

125mm (5”)W1002

140mm (5 1/2”)W1003

150mm (6”)W1004

140mm (5 1/2”)W1006

160mm (6 1/2”)W1007

General purpose side cutters withvarying cutting capacities.

NIPPERS DIAGONAL CUTTING KNIPPEX

140mmW1009

160mmW1010

125mmW1008

180mmW1011

200mmW1012

High quality side cutters with superiorfinish

PLIERSCOMBINATION

General purpose combination plierswith side cutter and serrated jaws

150MM (6”)W1022

200MM (8”)W1023

PLIERS WATER PUMPW1031

Chrome vanadium slim jaw water pumppliers with 7 position positive lockinghead.Length: 250mm.

PLIERS STRAPPINGW1032

Specialist pliers for use with StrappingSteel 5mm and Buckle Strapping Steel.

PLIERS ROD SWEEPW1033

Scissor action pliers with unusuallyshaped jaws to aid the separation ofRods Duct fitted with latch typecouplings.

PINCERS 7”W1034

Carpenters type pincers 7” in length.Supplied with plain handles and ablack oxide finish.

SPANNERQUICK GRIP NO 1

W1064

A plier type spanner used to grip nutsand bolts of non standard hexagonsizes.


101

08. Tools

SCREWDRIVER SETW1039

7 piece chrome vanadium screwdriverset with softgrip handles. Includes slotted: 75x3mm, 100x5mm,100x6mm, 150x8mm, PZD75mmxNo.0, 75mmxNo.1, 100xNo.2.

SCREWDRIVER CABINET

150mm (6”) 8mmW1051

200mm (8”) 9.5mmW1052

75mm (3”) 6.5mmW1050

250mm (10”) 9.5mmW1053

SIZE TIP WIDTHCODE

“Cabinet” pattern, larger typescrewdrivers for general engineeringand carpentry work.

200mm (8”)W1061

250mm (10”)W1062

150mm (6”)W1060

300mm (12”)W1063

General purpose adjustable spanners.

SPANNER ADJUSTABLE

A plier type wrench with self lockingfacility.

WRENCH VICE GRIPW1070

A security driver for use on tamper-proof hexagonal fasteners. Size: 2.5mm AF

WRENCH HEXAGONW1071

A round bladed bradawl 1/8” diameterfor starting holes in wood and othersoft materials.

BRADAWLW1072

SCREWDRIVERS INSTRUMENT

Specifically designed for use on telecommunications equipment.The styles and dimensions of the tip blades and handles limit thetorque that can be applied.

1 2 1/2 ” 1/8” 0.018”W1040

2 2” 3/16” 0.018”W1041

3 2 1/2 ” 1/4 ” 0.025”W1042

4 6” 5/32” 0.013”W1043

5A 7” 7/32” 0.020”W1044

6 8” 9/32” 0.025”W1045

9 3” 3/16” NO.1 POINT PHILLIPSW1046

10 4” 1/4 ” NO.2 POINT PHILLIPSW1047

11 3” 3/16” NO.1 POINT POSIW1048

12 4” 1/4 ” NO.2 POINT POSIW1049

CODE TYPE BLADE LENGTH TIP WIDTH TIP THICKNESS

AUGER SCREW

Used for drilling holes in both softwoodand hardwood. Manufactured from highcarbon steel.

Additional sizes available.

3/8” X 18”W1158

5/8” X 18”W1159

1/2” X 18”W1157

GIMLETBELLHANGER

W1056

Hand operated boring tool for use onwood and other soft material.Size: 1/4” x 15”


102

HAMMER CLAW

20 ozW1114

24 ozW1115

16 ozW1113

For general removing of nails but notsuitable for use on masonry pins.Hickory handle.

1 1/2 LBW1111

2 LBW1112

1 LBW1110

12 ozW1116

16 ozW1117

HAMMER JOINER

Cross-pein headed hammer. Hickoryhandle.

HAMMER CLUB2 1/2 LB

W1107

Hickory handle. Lightweight cross-pein hammer for useon internal wiring cleats but notsuitable for masonry pins. Hickory handle.

HAMMER CROSSPEIN 4OZ

W1108

Small pin hammer. Hickory handle.

HAMMER PIN BALLPEIN 4OZ

W1109

115mm face

MALLET WOODENW1118

Hickory handle.

HAMMER BALL PEIN

08. Tools

MIRROR PLUMBERW1132

Inspection mirror. Size: 100 x 100mm

Sets of allen keys for general use.

ALLEN KEYS

METRICW1134

IMPERIALW1135

STEEL - 30M (100FT)W1155

FIBREGLASS - 15MW1156

STEEL - 15M (50FT)W1154

FISH TAPE

Used for the installation of cable andwires through conduit, voids and walls.Supplied in impact resistant case. Thefibreglass fish tape is supplied with a180mm flexible leader.

3 MW1149

5 MW1150

TAPE MEASURE

30 MW1151

50 MW1152

TAPE STEEL

A draw tape for use in the wiring ofconduit and trunking. A steel tapeencased on a storage reel completewith a winding handle. Size: 6mm x 20m

TAPE DRAW-IN 2W1153

12mm wide. High quality steel bladewith a phosphate coating for rustprotection. Metric/ Imperial graduations.Metal end hooks & claw. Steel casewith vinyl coating.


103

08. Tools

FILE BASTARD 8”

Hand file for use on metal work. It hasmedium coarse teeth pitch.

BOLSTER CHISELWITH GUARD

W1126

Solid forged & hardened chisel withshock absorbing hand guard. Size: 100mm.

PLUGGING CHISELWITH GUARD

W1127

Used for removing mortar. Size: 250mm.

COLD CHISEL

Solid forged chisel with hardenedcutting edges.

19 x 200mmW1122

25 x 300mmW1123

COLD CHISELWITH GUARD

Solid forged & hardened chisel withstrong flexible hand guard.

19 x 200mmW1124

25 x 300mmW1125

MALLET RUBBER

24 ozW1120

32 ozW1121

16 ozW1119ROUNDW1130

HALF ROUNDW1131

FLATW1129

White rubber hammer which will notmark or discolour surfaces.

KNIFE POCKET 2W1087

Folding type pocket knife with a curvedblade.

KNIFE SHARPENER 1AW1088

Knife sharpener for use on steel bladedknives only.

KNIFE HACKINGW1089

Can be used to either remove puttyfrom windows or strip lead sheathsfrom cables.

KNIFE RETRACTABLEW1090

A general purpose knife withretractable blade.

BLADE 300MM/18TPIW1102

BLADE 150MM (PACK 10)W1103

HACKSAW BLADES

Replacement blades for both junior andlarge hacksaws.

HACKSAW LARGEW1100

300mm (12”) general purpose hacksawwith an adjustable frame.

Small metal frame hacksaw with150mm blade.

HACKSAW JUNIORW1101

A general purpose Bowsaw. Length: 620mm

BOWSAW W1104


104

08. Tools

JEWELLERS SNIPSW1079

High quality snips, ideal for cutting inrestricted spaces. Length: 175mm

SCISSORSCRANKED 7”

W1078

For use on copper and steel tapesduring coaxial jointing.

SHEARS LOPPINGLONG ARM

W1075

A pruning shear for cutting undergrowthand branches up to 25mm in diameter.

CUTTER CABLEHAND NO 1

W1084

Cable cutter for use on cables between25 and 100mm in diameter.

CUTTER CABLEHAND NO 2

W1085

Suitable for cutting non-armouredcables of up to 25mm diameter.

SHEARS HAND(TINSMANS)

Tin snip type cutters for use with sheetmetal work.

200mmW1076

250mmW1077

CUTTERS BOLT

600mm (24”)W1082

750mm (30”)W1083

450mm (18”)W1081Used for smaller bolts

900mm (36”)W1080

Used for cutting stranded steel wire ofup to 11mm diameter

Used for cutting bolts and soft steelrods up to 14mm diameter, but 10mmmaximum on high tensile steel rods

CUTTER COAX

CAPACITY 25.4MMW1221

CAPACITY 19MMW1220

Cuts distribution coaxial cable andcopper cable with no cable distortion.Lightweight, easy to use. Length: 203mm

TELESCOPIC PRUNING SAWW1222

Extends to 2 metres (excluding theremovable pruning saw blade). Thebypass pruner is spring-loaded andrope operated. The tubular handle hasa simple twist lock telescopic action.

CUTTER SUBDUCTE3209

A circumferential cable cutter for useon Sub-duct

Ratchet action subduct cutter withhardened steel blade. Ratchet & levermechanism will cut subduct, conduit &plastic extrusions up to 42mm withoutcrushing. Low cost version

CUTTER SUBDUCTE3200

Used to cut blown fibre tubing squareprior to insertion in tube connectors.

CUTTER TUBE 2AW1224


105

08. Tools

CUTTERLONGITUDINAL 1A

W1086

A longitudinal cable cutter for use onSub Duct Mono-Bore 3A.

This is a plier type tool with two ‘v’shaped anvils and an adjusting screw.It is used to remove the outer insulationfrom wires prior to crimping. Theadjusting screw allows the user to caterfor different size cables.

STRIPPER WIRE NO 2W1091

Cable stripper for use on plasticinsulated cables between 6-28mmdiameter. The rotating blade allows tobe made either circumferentially orlongitudinally.

STRIPPER CABLESHEATH 5 (‘G’ STRIPPER)

W1092

Cable stripper for cables between 4.5- 28.5mm diameter. Stripping actionis both circumferential and longitudinal.

STRIPPER CABLEMK02

W1105

STRIPPER CABLE SHEATH

8 (8-28mm)W1094

9 (29-35mm)W1095

10W1096

10A (HEAVY DUTY VERSION)W1097

7 (4-16mm)W1093

Used to strip cable sheaths fromcables of various diameters. It is ableto make both longitudinal andcircumferential cuts. The rotatingcutting head allows a change ofdirection of the cut without the need toremove the tool from the cable.

STRIPPER DROPWIRE

A longitudinal stripping tool for use onDropwire 10. (A “Butterfly Tool”)

STRIPPER WIRE

5 (0.25MM)W1138

6 (0.4MM)W1139

7 (0.5MM)W1140

Lightweight plastic and aluminiumstripper, used to strip the insulationfrom single conductors. Adjustable strip length up to 50mm.

CYCLOPS STRIPPERW1142

Outer sheath cable stripper for UTP/STP, multicore and fibre cables up to11mm diameter. Automatic, noadjustment required.

SMART STRIPW1141

Versatile and compact tool suitable forall types of standard insulation. StripsUTP & STP data network cable.Produces an accurate depth of cut toany standard insulated size of wire orcable in the 0.75-10mm range.

DATA CABLESTRIPPER

W1143

Data stripper for UTP/ STP cables.Max cut depth 1mm.

STRIPPER/INSERTIONTOOL

W1144

Low cost cable stripper for UTP/ STPcables 5 – 6mm dia with insertion headfor 110, 88 type connectors.

STRIPPER WIREVERSATILE

W1209

Versatile stripper for 0.5, 0.75, 1, 1.5,2.5, 4 & 6mm wire with safety catchand hardened & tempered blades.Length: 150mm.

STRIPPER WIREAUTOMATIC

W1210

Strips 0.5, 1.2, 1.5, 2.0, 2.6 and 3.2wire. Adjustable stripping length, springloaded, accurate stripping every time.


106

08. Tools

SINGLE HEADW1185

DOUBLE HEADEDW1186

KRONEW1057

OUTRIGGER SIDW1194

A wiring aid for use on the SIDconnection system.

INSERTER TOOL 8A (PORTA)

W1181

An insertion tool for use with JumperWire on Porta Jacks Test 44-49

INSERTER WIRE 110W1189

High performance heavy dutyergonomic design punchdown tool foruse on Krone and other terminalblocks. Separate blades available for66, 66 & 110/88, Bix and Quanteconnectors.

INSERTER WIRE 2A

An IDC terminating tool for use on 10pair Disconnection Strips 237A. Itincorporates an extraction hook whichassists in the removal of terminatedwires.

An insertion tool used to connect singlewires to MCCS BIX Connectors.

INSERTER WIRE 9A (BIX)

W1182

OUTRIGGER 25AW1190

A wiring aid for use with 10 pairconnection/disconnection modules.(strips 237A).

INSERTER WIRE SIDW1187

Wire insertion tool for use on the SIDconnection modules. Red handled.

EXTRACTOR 58W1188

A wire extraction tool for use on PortaJacks Test 44-49 series.

INSERTER WIRE MDF 71

W1260

Insertion Tool MDF 71 is IDC InsertionTool for use on Siemens blocks.

INSERTER WIRE POUYET

Available as either a single insertiontool for use on the Pouyet ConnectionStrips or a dual purpose doubleheaded insertion tool.

INSERTER WIRE 10A (3M)

W1183

3M single point insertion tool with anautomatic wire cropping facility.

INSERTER WIRE 11A (3M)

W1184

As Internal Wire 10A but with noautomatic wire cropping facility.

NON-KRONEW1058


107

08. Tools

A cotton canvas tool bag with anadjustable waist belt.

19” Toolbox ideal for transportingand storing multiple tools.

• 2 removable organisers for • storing small parts• Metal latches for secure locking • of toolbox• Fixed organiser for • screwdriver bits• Removable tote tray• Easy grip handle

Size: 486 x 254 x 178mm

BELT POCKETW1196

New design, heavy duty tool bag withadjustable waist belt.

BELT POCKET-NEWW1215

• 19” tough construction toolbox • Quality moulded-in padlock clasp for • extra security (padlock not included) • Internal tool tray with lift out handle • 2 removable double storage • compartments • Internal top tray dimensions: 18" x 7.5" • Internal total depth of compartment is 8"• without top tray • Top quality carry handle

Size: 475 x 238 x 225mm

CURVER TOOLBOXW1199

Two pocket pouch made for strongsuede leather with heavy duty stitching,suitable for carrying nails or smalltools. Supplied with an adjustable belt.

NAIL POUCHW1250

Heavy duty leather hammer holder withsteel loop.

HAMMER HOLDERW1251

TOOLBOXW1195BASKET TOOLW1197

A general purpose canvas tool bag witha reinforced bottom.

TOOL BAG CANVASW1198

Good quality canvas tool bag withstrong webbing handles & heavy-dutynylon zip. Size: 460mm.

6P6CW1204

8P8CW1205

4P4CW1203

CRIMP TOOL631A/431A

W1200

Dual purpose crimping tool for use onboth 431A and 631A telephone plugs.

PLIERS CRIMPINGRATCHET

W1201

Heavy duty ratchet crimping pliers forinsulated terminals.Red 0.5-1mm2, Blue 1.5-2.5mm2,Yellow 4-6mm2

Features wire cutter, wire stripper andlocking pin.

CRIMP TOOL 1

CRIMP TOOL 4W1208

Ratchet action crimper used to crimp8P8C, 6P6C and 4P4C plugs. Featureswire cutter and wire stripper.

CRIMP TOOL 2W1206

Use to crimp 8P8C, 6P6C and 4P4Cplugs (RJ45 & RJ11). Features wirecutter and wire stripper.

CRIMP TOOL 3W1207

Use to crimp 8P8C and 6P6C plugs.Features wire cutter, wire stripper andlocking pin.


108

Pressed steel caulking gun for application ofsealants & adhesives. Handle with plunger &release clip. Capacity 300ml.

08. Tools

Staple guns supplied in two sizes.

max 4.5mm diameter cables

max 6.0mm diameter cables

STAPLE GUNS

STAPLER 28MMW1136

STAPLER 36MMW1137

50W 50VOLTW1161

PLUG 235AW1168

25W 50VOLTW1160

TENSIONERS ( CABLE TIES)CABLE CASTER

10A (METAL) 4.6 - 13W1148

6A (METAL) 2.4 - 4.6W1146

7A (PLASTIC) 4.6 - 7.6W1147

5A (PLASTIC) 2.4 - 4.6W1145

MASTIC GUNW1128

Low cost plastic & metal cable tietensioning tools. Suitable for variouscable tie sizes.

SOLDERING IRONREST 1 & CLAMP

W1164

For use in Telephone exchanges tohold soldering iron 25W, 50V.

SOLDERING IRONNON-ELECTRIC

W1162

Used externally where no mains powerexists, or where gas powered solderingirons are unsuitable. Wooden handledtool 14” in length with a 4oz copper biton the end.

SOLDERING IRONGAS

W1163

Gas soldering iron powered by butanegas.

SOLDERING IRON 50 SERIES

Aluminium body, professional qualitydesoldering tool.Length: 190mm Diameter: 20mm

DESOLDERING PUMPW1165

24 volt and 50 volt soldering ironssuitable for exchange work. Can beused with Transformer Tool Electricwhen a suitable power source cannotbe obtained.

Supplied without Plug 235A which canbe ordered separately.

DESCRIPTION CABLE TIECODE

Used for installation of lightweightcables in difficult to reach spaces. • 50' (15m) range allows for faster

installations with fewer pulls. Dart islaunched to the cable supply point,pulling a durable monofilament line,cable is attached to the dart andpulled back with the CableCaster™reel

• Glow-in-the-dark darts are easy tolocate and are aero-dynamicallydesigned for highly accurate flightand fast installation

• Optional flashlight improves visibility

CABLECASTER™ TOOLW1212

REPLACEMENT DARTS (4)W1213

CABLECASTER™ TORCHW1214

10A

5A

STAPLES

36/ 12mmC6274

36/ 14mmC6275

36/ 10mmC6273

28/ 10mmC6271

28/ 10mm WHITEC6272

28/ 8mmC6270

A range of galvanised staples for usewith Staple Guns 28 and 36. Supplied in boxes of 5000.


109

Wire gauge: 0.5mm Wire gauge: 0.4mm

Wire gauge: 0.5mm

Wire gauge: 0.65mm

Wire gauge: 0.4mm

Wire gauge: 0.5mm

Wire gauge: 0.65mm

Wire gauge: 0.5mm

Wire gauge: 0.5-0.65mm




Wire gauge: 0.4 mm

Wire gauge: 0.5-0.65 mm


Wire gauge: 0.5-0.65 mm

Wire gauge: 0.65mm

08. Tools

WRAPPING HEAD 3GW1170

Used with Wrapper Wire 5 to cut, stripand wrap PVC insulated cables.Requires Wrapping Holder Head No1.Wire diameter: 0.5mm Tag diameter: 1.78mm

WRAPPING HOLDERHEAD 1

W1171

Holder for use with Wrapping Head 3G.

WRAPPER WIRE TERMINATING 5W1169

A 50V wire wrap tool used withHolder Head Wrapping 1 andHead Wrapping 3G.

Wrapping range: 0.20-1.0mm(30-18AWG).

WRAP UNWRAP TOOL

An ergonomic design, 230V wirewrapping tool. Electric or batteryoperated versions available. Wrappingrange: 0.20-1.0mm (30-20AWG).

Wrap/ Unwrap Tool Electric

Wrap/ Unwrap Tool Electric withBackforce

Wrap/ Unwrap Tool Kit Battery Powered(includes tool, charger, 2 batteries)

230VW1172

230V WITH BACKFORCEW1173

230V KIT BATTERY POWEREDW1174

WIRE WRAPPING BITS & SLEEVES WIRE WRAPPING BITS & SLEEVES LONG

WRAPPING SLEEVE INSULATED

BIT AWG26 REGULARW1175

BIT AWG26 MODIFIEDW1175M

BIT AWG24 REGULARW1176

BIT AWG24 MODIFIEDW1176M

BIT AWG22-24 REGULARW1177

BIT AWG22-24 MODIFIEDW1177M

SLEEVE AWG22-24W1178

SLEEVE AWG24-26W1179

AWG26W1231

AWG22-24W1232

AWG22W1233

WRAP/UNWRAP BIT & SLEEVE SET

AWG24-26W1234

AWG22-24W1235

BIT AWG26 REGULAR LONGW1225



SLEEVE AWG26 REGULAR LONGW1228



WIRE WRAPPING TOOL MANUAL

Designed with a chuck nose piece tomake use of bits and sleeves made forpower tools. The aluminium tool has1000V dielectical coating. Wire range: 0.20 – 0.65mm.

STANDARDW1236

ALUMINIUMW1237

Fully compatible with Wrap/UnwrapTool and manual wire wrapping tools. Designed for wire wrapping in areas

requiring deep penetration. Length: 127mm.

Wire gauge: 0.4mm

Wire gauge: 0.4mm

The insulated sleeves are covered witha material which provides 1000Vdielectric strength which helps toprevent shorting between pins andenhances worker safety.

Combines both wrap and unwrapfunctions into one bit/ sleeve set. Thebit is precision machined for highquality wrapping in the clockwisedirection, but also includes the removal

mechanism to unwrap when operatedcounter-clockwise. It can be easilyswitch between wrap and unwrapmode. The sleeve is coated with adurable 1000V dielectric material.


110

08. Tools

WIRE UNWRAPPING TOOL WIRE CUT AND STRIP TOOLS

A - LEFT HAND W1238

B - LEFT & RIGHT HAND W1239

C - LEFT HANDW1240

C - LEFT & RIGHT HANDW1241

Used to remove wire connections. Wirerage: 0.80-0.40mm (20-26AWG).

A revolutionary concept for easy andclean stripping of wires for wirewrapping, electronic and applianceapplications. Designed for maximumefficiency. Easy to operate, strip lengthis easily adjustable. Replacementblades are interchangeable betweenboth strippers. Clean, no-nick strippingensured.

WIRE WRAP UNWRAP TOOL

Precision, long-lasting tools for use where occasional wraps are required orwhere power wire-wrapping tools are not practical. To switch from wire wrappingto unwrapping takes only seconds – just a quick change of the cap from one endto the other. Wire rage: 0.80-0.40mm (20-26AWG).

Wrapping Side (mm)Unwrapping Side (mm)

Wire Size Terminal Terminal OutsideHole Hole Diameter

Diameter Depth0.50-0.65 1.90 20.50 5.530.80-0.40 1.77 25.40 3.96

0.50 1.75 28.50 5.530.80-0.40 1.77 25.40 3.96

0.40-0.50 1.90 19.05 5.530.80-0.40 1.77 25.40 3.96

ST100W1242

ST100-26W1243

3907W1244

3907-26W1245

Wire Gauge (mm) 0.65-0.50

Wire Gauge (mm) 0.40

Wire Gauge (mm) 0.65-0.50

Wire Gauge (mm) 0.40

AWG24-26W1248

AWG24W1247

AWG22-24W1246

C

B

A


111

08. Tools

STRIPPER FIBRE 10AW4000

A plier type stripping toolfor removing the "R" typeprimary coating fromoptical fibre cables.

STRIPPER FIBRE "TRI-HOLE"W4032

New three-hole modelperforms all common fiberstripping functions in onecompact tool.• Removes 2 to 3mm fibre

jackets • Removes 900 tight buffer

to 250 micron buffercoating

• Standard 250 to 125micron stripping

STRIPPER FIBRE ROUND

Excellent tool for precisejacket stripping from mostfibre optic cables with up to40mm diameter. The depthof the cutting blade isadjusted to suit the cablejacket diameter. Longitudinaland spiral cut.

SILICONSTRIP®

SPLITSTRIP

Stripper for fast removal of primary silicone coatings from optical fibres. Delring®stripping blades are permanently set at an angle which prevents any damage to thelight guide. Supplied in a storage case and set of replacement blades.

Lever action tool designed toremove Kevlar® reinforcedprotective sleeving from fibreoptic bundles. Suppliedcomplete with storage caseand a set of sleeve guides. Stripping capacity: 2 – 7mm.

Cable diameter: 4.5 – 29mm

STRIPPER FIBRE NO-NIK

W4004

W4005

W4006


This stripper has dualholes for primary andsecondary coating. Strips250 micron butter coatingto expose 125 microncladded fibre. 1.0mmstripping hole at the tipcan be used for strippingthe fibre jacket. 140 μmhole and V-opening inblade removes 250micron butter coatingfrom 125 micron fibre.


A lightweight spring loaded plier typetool used to remove the secondarycoating from loose jacket optical fibresup to 3.2mm OD. Supplied with 3 adjustable blades.

Optical fibre coating strippers with plastic heads, which make contact only with theinsulation, centre and support the fibre on both sides. The sharp cutting bladesscore the coating completely, whilst the supporting back-up blades ‘lock-up’ whenthe tool is closed, maintaining perfect concentricity of the fibre. Length: 135mm.

STRIPPER FIBRE 3A(OPTISTRIP)

W4002

Removes secondary coatings fromoptical leads and small cables up to3mm O.D. Equally effective on loosetube or tight fit fibres. Supplied withstorage case and guide bushings.

STRIPPER COLOUR FIBRE SIZE CUTTINGFIBRE DIAMETER

2A WHITE 200-250MM 305MM (.012)

13A LIGHT BLUE 150-200MM 254MM (.010)

14A RED 125-150MM 203MM (.008)

STRIPPER FIBRE ROUND 29MMW4010

Cable diameter: 19 – 40mm

STRIPPER FIBRE ROUND 40MMW4011SILICONSTRIP®W4020 REPLACEMENT BLADEW4021

2.5 - 3.5MMW4023

3.5 - 4.5MMW4024

4.5 - 5.5MMW4025

5.5 - 6.5MMW4026SPLITSTRIPW4022

REPLACEMENT SLEEVE GUIDES


112

08. Tools

SCRIBE CLEAVERS

FIBRE OPTIC CRIMP TOOL

Ratcheting action crimp tool forpositive, full cycle crimping of fibreoptic connectors. Rugged steel frame.Several common fiber optic hex sizejaws available.

FIBRE OPTIC CLEAVERW4029

• Extremely precise cleave lengthsfrom 6.5mm to 20mm

• Endface angles of less than 2degrees every time

• Precise cleaves required by "no-polish" fibre connectors for simplesand duplex cables

• Tremendous repeatability• Compatible with glass fibres, coated

fibre as well as cable form

SPLICER'S SCISSORSW4009

Multi-purpose service tool. All surfacesdouble-plated with chrome over nickel toprevent rust and corrosion. Strippingnotches for 19 and 23 gauge wire.Scraper and file on back of blade.Length: 140mm.

TWEEZERS

FIBRE CUTTERKEVLAR®

W4007

Cuts Kevlar® strength members in fibreoptic cables. Full serrated edge,powerful quick cutting.

General purpose, popular for assemblyline wok. Strong, stainless steel, anti-magnetic.

FIBRE SCISSORSKEVLAR®

W4008

Lightweight, high carbon molybdenumand vanadium steel blades, ergonomicdesign handles, one micro-serratedblade reduces slippage. Length: 140mm

SCISSORS KEVLAR®CERAMIC

W4019

Lightweight, ceramic blade scissors,purpose made for cutting and trimmingKevlar or Aramid yarns. The ceramicblades stay sharper for longer but othermaterials will damage the blades.

FINE TIPW4036

Excellent for die attaching, wire bondingand handling miniature parts. Stainlesssteel, anti-magnetic.

NEEDLE TIPW4037

Extra fine curved tips for working onminiature assemblies. Stainless steel,anti-magnetic.

CURVED TIPW4038

Pen style fibre cleaver with 30° wedgetip carbide scribe 3.8mm wide.

STANDARD SCRIBE W4016

Retractable pen style stainless steel fibrecleaver with 60° conical diamond tip.

DIAMOND SCRIBE W4017

Pen style scribe with reversible carbideblade edged on both ends. 5mm wide.

DOUBLEEND SCRIBE W4018

1AW4012Cavity size & shape 043, .068, .100, .137, .213, .255

1BW4013Cavity size & shape 042, .068, .078, .128, .151, .178

1CW4014Cavity size & shape 042, .068, .133 R, .162 R, .195 R

1DW4015Cavity size & shape 042, Hex: .068, .151, .178, .213

* R= Round Crimp. All other cavities are hexagonal

WORK MAT (BOX OF 10)W4040

WORK MAT ANTISTATIC

• Protects delicate assemblies andexpensive work surfaces

• Make small parts handling easier andquicker

• Inexpensive and disposable • Anti-static and free from

contamination • Cushioned surface depress easily to

give tools a sure grip on parts • Non-slip back • Available in two sizes of mats or rolls

279mm x 356mm

WORK MAT (BOX OF 10)W4041356mm x 559mm

WORK MAT ROLLW4042559mm x 55m

WORK MAT ROLLW40431118mm x 55m


113

08. Tools

FIBRE TOOL CASEW4033

A robust aluminium tool case with lock.The base of the case is supplied with apre-cut plastazote insert to accept avariety of tools. Three cutouts in the lidinsert accept a small plastic boxsuitable for housing consumables,power lead and glass polishing plate.The lid and the base are separated bya B.G. resin board. Dimensions: 457 x 343 x 146mm.

FIBRE PREPARATION KITW4028

Contains a complete range of specialpurpose tools designed specifically forthe preparation of single-mode andmulti-mode fibre optic cables. Suppliedcomplete in carrying case. Size: 295 x 200 x 50mm. Kit includes: • Splitstrip with sleeve guides• Optistrip (Stripper Fibre 3A) with

guide bushings• Siliconstrip with Delrin® stripping

blades • Precision cutter & screwdrivers

FIBRE OPTIC KITW4027

Standard kit includes: • Stripper Fibre 10A• Buffer Tube Scoring Tool • Fibre Cutter Kevlar • Universal polishing disc for 2.5 mm

ST, SC and FC connectors • Double End Carbide Fiber Optic

Scribe • Fiber Continuity Tool

• Fiber Polishing Pad • 60 to 100x Inspection Scope • Tweezers • 152mm precision scale • Crimp Tool • Permanent marker pen • Fiber Waste container • Safety glass recommended

High quality set of tools for professional installers, sold in rugged, positive-closure,hard case. Size: 305 x 432 x 90mm. Weight: 2 kg. Different kit configurations can be supplied


114

08. Tools

PLIERS CRIMPING 6A W3000

A ratchet type crimping tool for use on all Telecom coaxial cables and 43 type plugsand sockets. The die sets are interchangeable and should be ordered separately.

SNAP & SEAL™ TOOLIT1000

W3009

A combination tool which prepares thecable and installs the RG59/ 6connectors.

SNAP & SEAL™ TOOLL3011B

W3011

For installing RG7 and RG11 connectors.

COAXIAL STRIPPER 8A W3012

Designed for three-level stripping of 2001, 2002 & 2003 coaxial cable. Quick changecam and guide inserts are provided for each cable size so no adjustments to the toolare necessary. Supplied in yellow plastic case with 5 blades.Box size: 195 x 75 x 40mm

STRIPPER COAXIALW3036

Coaxial cable stripper for RG 6, 58, 59 &62.

COAXIAL STRIPPER 9A W3013

An adjustable cable stripper for three-level stripping of coaxial cable with an outerdiameter 2 - 9mm. Supplied in blue plastic case with 3002 cam and guide set and 5blades. Appropriate cam and guide sets can be used to suit any make or batch ofcable. It can also strip RG179, RG59, RG6, RG62, RG11, RG58, RG31, RG223 andTZC cable.Box size: 195 x 75 x 40mm

CAM AND GUIDE SET

Used with Stripper Coaxial 8A and 9A.

REPLACEMENT BLADEW3010

CAM & GUIDE SET 2002W3014



CAM & GUIDE SET RA7000W3017

CAM & GUIDE SET RA8000W3018

CAM & GUIDE SET RG59W3019

CAM & GUIDE SET RG179W3020

DIE SET 2002W3001

DIE SET 2003W3002

DIE SET 3002W3003

DIE SET RG179W3004

CRIMPING TOOL HEX

Precision quality alloy steel self-bottoming jaws for crimping RG59/6and RG7/11 cables.

W3021

W3022

W3023

W3024

PLIERS CRIMPING19A

W3005

A plier type crimping tool for use withthe 43 type plugs and sockets. Thistool is used for crimping the centrecontact pin to the coaxial conductor.

CRIMPING TOOLRG11

W3007

For use on RG11 cable.

CRIMPING TOOLRG6/ RG59

W3006

Dual purpose crimping tool for use onRG6/ RG59 cable.

MODEL HEX SIZES(INCH)

CR211CX 0.475

CR360 0.360

CR596Q 0.384/0.324

CR596QL 0.360/0.324


115

08. Tools

STRIPPER COAXIALRG6

W3025

Coaxial cable stripper for use on RG6cable.

STRIPPER COAXIALBT

BT coaxial cable strippers for use on2002, 2003 and 3002 cable.

STRIPPER DROP UNIVERSAL UDTW3030

One step cable preparation exposesthe centre conductor and removes thejacket of all RG59, 6, 7 & 11 cables.Performs 1/4” (6.35mm) braidpreparation.

STRIPPER C.A.T.V. W3064

Coaxial cable stripper for RG 6, 59, 7and 11. Strips both the cable jacketand the dielectric to 0.25" (6.4mm).Cartridges included.

STRIPPER COAXIALRG11

W3026

Coaxial cable stripper for use on RG11cable.

STRIPPER CST596W3027

Cable stripper for use on cables RG6and RG59

STRIPPER CST11 W3028

Coaxial Cable stripper for use on RG11Cable.

2002W3033

2003W3034

3002W3035

REPLACEMENT BLADE RG6/59W3065

REPLACEMENT BLADE RG7/ 11W3066



STRIPPER DROP DUAL DDTW3037

One step, small, lightweight stripper forpreparation of RG59, 6 & 11 coaxcable. It precisely exposes the centreconductor by 5/16" (7.93 mm) andremoves the proper length of jacket at1/4" (6.35 mm) without any adjustmentor changing blade cassette.

One step, small, lightweight stripper forpreparation of RG59 & RG6 coaxcable. It precisely exposes the centreconductor by 5/16" (7.93 mm) andremoves the proper length of jacket at1/4" (6.35 mm).

TRIMMER DROPLIGHTWEIGHT LDT

W3040



REPLACEMENT BLADE W3041

Complete RG59/6 Series drop cablepreparation kit in a lightweight case. Includes: • Crimp Tool with 0.360"/ 9.1 mm hex

size (W3022)• Stripper Drop SDT RG59/6 6.35mm

preparation (W3070)• Insertion & Flaring Tool for RG59, 6,

7 & 11 ‘F’ connectors (W3057)• Pack of RG59/6 series Universal ‘F’

connectors (15 each)

Dimensions: 340 x 260 x 80mm Weight: 1.77kg

DROP CABLE PREPARATION KITW3043

STRIPPER DROP SDT

Small, lightweight tool, in one step cable preparation it exposes the centreconductor and removes the proper length of jacket. Select models for either .250 (1/4”) or .125 (1/8") braid preparation. Two superior quality tool steel bladecassettes included.

MODEL CODE CODE CODE

FOR .250 (6.4MM) FOR .125 (3.2MM) REPLACEMENT BLADES

RG59/ 6 W3070 W3073 W3076

RG7 W3071 W3074 W3077

RG11 W3072 W3075 W3078


116

08. Tools

STRIPPER COAX JST

A range of strippers forremoving jackets from anyhardline CATV cables includingoversized jackets and floodedcables.

CODE CODE CABLE(STANDARD TOOL) (EXTRA THICK JACKET)

CommsScope® P3 Cable, TIMES FIBER T4 Plus, T6, T10

W-JST412 W-JST412T 412





W-JST1000 W-JST1000T 1000

TIMES FIBER TX Cable, CommsScope® P3 Cable




W-JST1160 W-JST1160T 1160

ACCESSORIES FOR QCST TOOLS

RATCHET DRILL SHEATH JACKET CABLETOOL ADAPTER CUTTING STRIPPING

BLADE BLADE

W-31250 W-31230 W-CB60 W-CB6667H 412 TO 840

W-31275 W-31235 W-CB60 W-CB6667H 860 TO 1000

W-31275 W-31235 W-CB26 W-CB6667H 1160

STRIPPING/ CORING TOOL ALL-IN-ONE

• All-in-one, accurately strips the jacket, cores out the dielectric, strips and bevelsthe aluminum sheet

• Quick-Change, conveniently attaches the jacket stripper body to the main body ofthe coring and stripping tool by rotating body ring

• Chamfered strip stop, 1” (25.4mm) stop for 412-750 tools and 1-1/16” (27mm)stop for 840-1160 tools

• Manual or drill operation, QCST tools have standard “T “ handle with ha built in3/8” (9.5mm) drill adapter, QCST-R tools have Ratchet “T “ handle and a built in3/8” (9.5mm) drill adapter

• Rugged, durable, all metal construction• Spiral-fluted, heat treated steel coring bit• Heat treated sheath cutting blade can be easily inexpensively replaced

ORDERING GUIDE FOR QCST TOOLS

STANDARD RATCHET CORING GUIDE CHAMFERED CABLETOOL TOOL BIT KIT SLEEVE STRIP STOPCommsScope® P3 Cable, TIMES FIBRE T10 CABLE

QCST412T QCST412TR W-CB114K W-29104 W-34942 412





QCST1000T QCST1000TR W-CB119K W-29113 W-34927 1000TIMES FIBER TX Cable, CommsScope® P3 Cable

QCST565 QCST565R W-CB146K W-29108 W-34942 565





117

08. Tools

STRIPPING/ CORING TOOL CST

• Strip stops available for exact stripping lengths of 12.7 to 50.8mm• Spiral-fluted, heat treated steel coring bit• Combination tool cores and strips in one fast and precise operation• Manual or drill operation, CST tools have standard “T” handle, CST-R tools have

Ratchet “T”. Both have built in 9.5mm drill adapter.• Heat treated sheath cutting blade produces a smooth bevelled edge and can be

easily inexpensively replaced

CODE CODE CABLE(STANDARD TOOL) (RATCHET TOOL)

CommsScope® P1, P3 Cable, TIMES FIBER T4, T6, T10 Cable, Alcatel CableBenelux – ACE Cable

W-CST412 W-CST412R 412





W-CST1000 W-CST1000R 1000

TIMES FIBER TX Cable, CommsScope® P3 Cable




W-CST1160 W-CST1160R 1160

STRIPPING/ CORING TOOL KIT FOR QUANTUM REACH® CABLE QRT

• Specifically designed forCommScope® Quantum Reach®(QR) cables and also prepares AlcatelCable Benelux – ACW cable

• Kits include a coring and stripping tooland a jacket stripping tool

• Manual or drill operation; CST toolshave a standard "T" handle with abuilt-in 9.5mm drill adapter. CST-RTools have a ratchet "T" handle and aseparate 9.5mm drill adapter.

• Heat treated, sheath cutting blade canbe replaced without the expense ofreplacing the entire coring bit

CODE CODE CABLE(STANDARD TOOL) (RATCHET TOOL)

W-QRT500 W-QRT500R 500




W-QRT1125 W-QRT1125R 1125

CENTRAL CONDUCTORCLEANER

W3044

Used for removing residual dielectricfrom the centre conductor of all sizes oftrunk and distribution cable withoutscratching or nicking.

COMPRESSION TOOLALL SERIES

W3046

Unique compression tool with 2 sets ofjaws for assembly of RG59/6 andRG7/11 type PPC EX and Snap andSeal™ connectors. Lightweight, highstrength cast aluminum body

COMPRESSION TOOL

A lightweight compression tools supplied with gauge block and allen key.

For RG59/6 type PPC EX connectors.Black tip for connector style.REPLACEMENT BLADEW3045

RG59/6W3048For RG7/11 type PPC EX connectors.Green tip for connector style.

RG7/11W3049

Coring Bit Kits, Guide Sleeves,Conductor Strip Stops and otheraccessories also available.

CUTTING BLADE 412-1000 CABLEW-CB60

Coring Bit Kits and Guide Sleevesavailable.

JSTQR BLADEWCB6667H

CUTTING BLADE 1160 CABLEW-CB26


118

08. Tools

INSERTION &FLARING TOOL

W3057

For insertion of RG59/6, 7 & 11 ‘F’connectors. Makes insertion fast andeasy. Flaring end of tool allows flaringor expansion of the cable providingeasier insertion of ‘F’ connectors.Especially useful when using tri andquad-shielded cables.

7/16” hex size. Design has a 7/16”shank on opposite end of tool thatallows the used of the TW TorqueWrench. Length: 203mm

TORQUE WRENCH ‘F’ TYPE

Torque Wrenches for tightening ‘F’connectors to preset value. Factorycalibrated to tighten to 30lb. Audible‘click’ indicates when proper torque isachieved.

RG59/6 7/16”W3051

RG7/11 9/16”W3052

WRENCHES

Length: 298mm

EXTRACTION TOOLW3055

For extraction of high density plugs andU links.

INSERTION/EXTRACTION TOOL

W3056

For insertion and extraction of highdensity plugs and U links.

BNC CONNECTOR WRENCHW3054

F-CONNECTOR WRENCH 7/16”W3053

TAP TOOL W3058

Tap Tool for use on "F" typeconnectors.

SECURITY SHIELDTOOL

W3059

For use with 7/16” hex shielded ‘F’Connectors. New design with extendedshank allows the tools to be used withthe Torque Wrenches in security shieldapplications.

TAP TOOL 7916W3060

Has both 7/16” and 9/16” hex sizes.Length: 127mm

TAP TOOL EXTRA LONG

W3061 TRAP TOOLW3062

7/16” hex Trap Tool fits 7/16” hex F-fittings and all standard traps.Length: 190mm

Combines a trap wrench with a securitywrench. Fits 7/16_ hex F-fittings, allstandard traps and all sizes and typesof metal security sleeves. Length: 190mm

TRAP SECURITYTOOL COMBO

W3063

COMPRESSION TOOL ALL-IN-ONEW3050

Allows for assembly of series RG59/ 6, 7 and 11 connectors from most connectormanufacturers. Tools are supplied with 2 unique interchangeable plunger tips for alluniversal series of RG56/6, 7 & 11 connectors as well as PPC-EX and PCT-TRS. TheTook Kit also contains SDT RG6/59 Stripper, a gauge block and allen key. All suppliedin blow-moulded case.


Cables

Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


09. Site Equipment Site Tools

Sheets

Tent

Measuring Wheels

Pumps

Generator

Torches

Site Lighting

Extension Cables

Two Way Radios

Cable Dispensers

9 Site equipment 12/8/09 10:54 Page 1

120

09. Site Equipment

All tools are supplied with either Ash MYD handle or Ash T handle.

Ash T Ash MYD

SPADE DIGGING (MYD HANDLE)W2150

CONTRACTORS TOOLS

CONTRACTORS TOOLS WITH FIBREGLASS HANDLES

A B CA

SHOVEL STOKING NO. 2 SQUARE (T HANDLE)W2151B

SHOVEL TAPERMOUTH NO.2 (T HANDLE)W2152C

SHOVEL TRENCHING (MYD HANDLE)W2153D

NEWCASTLE DRAINER (T HANDLE)W2154E

CABLE LAYING SHOVEL (MYD HANDLE)W2155F

CLAY GRAFTER (STEEL MYD HANDLE)W2156G

SPADE DIGGINGW2150-FA

SHOVEL STOKING NO. 2 SQUARE W2151-FB

SHOVEL TAPERMOUTH NO.2 W2152-FC

SHOVEL TRENCHING W2153-FD

NEWCASTLE DRAINER W2154-FE

CABLE LAYING SHOVEL W2155-FF

CLAY GRAFTER W2156-FG

D E F G

The new POLYFIBREPRO range is designed to offer theengineer a high degree of FibreGlass strength along with thecomfort of a profile moulded PYD hand grip. The fibreglasscore is coated with an injection moulded polypropylenesheathing. This produces an incredibly strong handle, virtuallyunbreakable and highly resistant. It is capable of withstandinghigh voltages and is self extinguishing.

SPADE DIGGINGW2150-IA

SHOVEL STOKING NO. 2 SQUARE W2151-IB

SHOVEL TAPERMOUTH NO.2 W2152-IC

SHOVEL TRENCHING W2153-ID

NEWCASTLE DRAINER W2154-IE

CABLE LAYING SHOVEL W2155-IF

CLAY GRAFTER W2156-IG

This SHOCKSAFE range of PolyFibre Insulated Tools fullyconforms to BS8020. The handles are doubly protected bytwin layers of polymer sheathing moulded over the rigidfibreglass core. The orange outer sheathing is high voltageand abrasion resistant. When the white inner sleeve becomesvisible, the tools should be removed from use around liveworking conditions. Each tool is flash tested to 10,000 Volts,uniquely numbered and certified.

A B C D E F G

CONTRACTORS TOOLS WITH INSULATED HANDLES

A B C D E F G


121

09. Site Equipment

CROWBAR 1W2000

A general purpose steel crowbar.

Size: 1500 x 32mm Diamond / Chisel

WRECKING BARW2071 PICK

With chisel and diamond point ends.

BRUSH GUTTERW2008

Used for cleaning Joint Boxes.

BRUSH WIRE

HEADW2005

HANDLEW2006

SCRATCH 1W2009

SCRATCH 2W2010

BROOM

A general purpose broom.

HEADW2011

HANDLEW2012

A forged high carbon steel, hardened &tempered wrecking bar. Length: 455mm.

CROWBAR INSULATEDW2161

Size: 60”Chisel / Point

Pole installation tools with wooden / metal handles

BAR DIGGINGE2014

POLE INSTALLATION TOOLS

A B C D E F

A



SHOVEL HOLERE2103D

PUNNER IRONE2003E


Pole installation tools with fibreglass handles

BAR DIGGINGE2015

A B C D E F

A



SHOVEL HOLERE2104D

PUNNER IRONE2004E


BRUSH SASH TOOL 6A

W2098

A plastic handled brush approx 25mmdiameter used for general cleaning inexchanges.


122

09. Site Equipment

WALKIE TALKIE COBRA MT600 TWIN PACKW2088

The MT600 Walkie Talkie provides highquality frequency communication with up toa 5 km range.

• Output 500 mW • Range - up to 5 km depending on terrain

& conditions • Channels 8 • CTCSS Privacy Codes • 38 Continuous Tone Codes Squelch

System • DCS Privacy Codes • 83 Digitally Coded Squelch • VOX function • Scan

• Call alert - 5 selectable call alert tones • Roger beep • Keyboard lock • Power saver • Squelch - Auto Squelch • Backlit LCD • Belt Clip • Connection - Speaker • Band UHF/FM • Microphone jack • Battery type - 4 x AAA rechargeable

batteries

WALKIE TALKIE COBRA MT800 TWIN PACKW2090

The Cobra MT800 radios come completewith charger, batteries and two basicheadsets, making it ideal for a number ofleisure and business activities.

• 8 Channels • 121 Privacy codes • Up to 5km Range (terrain dependent) • VOX (Voice activated transmission) • Baby Monitor • Y Wall charger (walrus) • Dual Watch (Chat on one channel,

monitor another) • Call alert with (10 selectable tones) • Roger beep (selectable on/off) • Backlit LCD display

• Battery power saver • Scan (channel / privacy codes) • Speaker / Mic / Charge jack • Battery low indicator • Keystroke tones (selectable on/off) • Key Lock • Belt clip • Manual

BOTTLEPOLYETHYLENE NO2

W2013

A high density polyethylene containerwith a capacity of 10 litres.

Used as a water carrier and for heatingwater on Stoves Propane. Capacity: 1.5 gallons.

BUCKET GALVANISEDW2015

Used for either bailing water out of jointboxes or warming water on a StovesPropane to assist the mixture of resin.

BOWL GIW2014

An aluminium 4 pint capacity kettle.

KETTLE ALUMINIUMW2016

WATER CONTAINER25L

W2095

A high density polyethylene containerwith a capacity of 25 litres.

BUCKET PLASTICW2096

Used as a water carrier. Capacity: 3 gallons.

BOWL WASH UPW2097

A plastic wash up bowl.

DUSTBIN PLASTICW2133

94 litre, heavy duty, complete with lid.


123

09. Site Equipment

SHEET CANVASW2019

Lightweight canvas sheet used toprotect cables during jointing typework.Size: 1.75 x 1.52 metres

SHEET WATERPROOFNO 1

W2020

A grey rubberised waterproof sheet forgeneral use.Size: 1.52 x 1.27 metres

SPOIL SKIP SHEETW2121

Double yellow skin spoil sheet with60mm single webbing slings with softeyes.SWL: 500 kgsSize: 1.8 x 1.8 metres

SOIL SHEETW2122

Single yellow skin soil sheet withoutslings.Size: 3.0 x 4.0 metres

WHEELBARROW

A wide based, 90 litreshallow pan Europeanstyle wheelbarrow withpowder coated finish andhandle grips. The 1mmgauge pan is supportedover full length by tubularsteel chassis and heavyduty polypropylenewheel centre.

KERB RAMPW2139

A basic contractor’s kerb ramp forreaching differing levels with ease.

SHEET WATERPROOFNO 2

W2021

A medium weight waterproof canvassheet designed for general purposeprotection on external work. Size: 1.98 x 1.98 meres

SANDBAGS HESSIANW2022

Size: 750mm x 325mm with tie string.

STOOL FOLDING W2024

A heavy duty folding stool.

MEASURING WHEEL5000

W2025

A Trumeter professional road measuringwheel supplied with fold away stand,folding & locking handle, quick releasebrake and carry bag. Precision 1 metercircumference, measures up to 10,000metres. Available in metric or imperialversion. Weight: 3kgs. 2 year guarantee.

MEASURING WHEEL5500

W2026

Low cost, robust Trumeter metric roadmeasuring wheel supplied with retractablestand, telescopic handle and carry bag.Precision 1 meter circumference,measures up to 10,000 metres. Lifetime guarantee.

TENT 12AW2023

White coloured, metal framed jointerstent. Zipped fastened down the centreof both ends. Dimensions: 1.2m high x 1.2m wide x 1.4m long

PNEUMATIC TYREW2137

SOLID RUBBER TYREW2138


124

09. Site Equipment

FUNNELW2142

Thick durable plastic funnel withbrassed gauze filter. Diameter: 160mm.

SUCTION PADSUCTION PAD DOUBLE

Expert quality aluminium alloy suctionpads for carrying heavy and difficultitems. Pad size: 115mm.

Max lifting capacity 40kg

Max lifting capacity 70kg

SUCTION PAD SINGLEW2140

SUCTION PAD DOUBLEW2141

HOSE 3AW2037

2” bore layflat delivery type hose. Foruse with Pump Portable 2” and PumpsSubmersible 3A & 4A.

VENTILATOR HOSEW2116

A flexible, yellow ducting hose, madefrom PVC coated nylon fabric with scuffstrip & fasteners. Size: 203mm x 7.6m.

PUMP PORTABLE 2”W2029

• 2” 4 stroke petrol engine water pumpencased in a strong carrying frame

• Supplied with hose connections andstrainer

• High capacity water removal, peak pumprate 550 litres per minute

• Suction height 8 metres, 26 metre maxpump head to enable high water lift

• Layflat and suction hoses to be orderedseparately as required

Weight: 27kgDimensions: 480 x 390 x 400mm

Supplied with Pump Portable 2” butcan also be ordered as replacementsor additional items.

PUMP ACCESSORIES

FILTERW2031

CLIPS (2X)W2033

RUBBER SEALS (2X)W2034

PLUG TOOL AND BARW2035

HOSE CONNECTORS (2X)W2032

2” bore suction type hose supplied in 5metre lengths. For use with PumpPortable 2”.

HOSE 2AW2036PUMP SUBMERSIBLE3A

W2030

110V centrifugaldrainage pumpused to pump-outundergroundstructures.Suppliedcomplete withsuction hose.Delivery hose tobe orderedseparately(Hose 3A).

PUMP HAND NO 1W2028

A lightweight hand operated pump used toextract water from joint boxes. It has amaximum output of 1 litre per completestroke at 2 metre lift, with a maximum lift of3.6 metres.

GENERATOR 2.2 KVAW2027

• 2.2 KVA Generator • Dual voltage output 110/ 220V • 5.5HP 4 stroke petrol engine• Full surround frame for site working • 13 hours continuous operation from 15

litre fuel tank• Features include: fuel gauge, automatic

voltage regulator, voltmeter, circuitbreaker, large capacity oil tank (0.6 litre),low operating noise level (65db).

Weight: 35 kgDimensions: 600 x 445 x 450mm

VENTILATORW2115

A lightweight, portable 110V ventilator withdouble wall polyethylene construction forextended lifetime and protection. Moves up to1,050m3 air per hour, and with ducting the aircan be moved 15 metres.

Dimension (mm) 390(l) x 320(w) x 470(h)Weight 8 kgImpellor Dia. 252mmDucting Flange Dia 203mm

TRANSFORMER 3.3 KVA

W2072

230V input, 110V twin output, 2 x16amp sockets, overload safety trip.

A

A

B

B

C

C D

D

EE


125

09. Site Equipment

RUBBER TORCHW2042

Water resistant and shock proof rubbertorch with ergonomic grip.

RECHARGEABLE TORCH1 MILLION CANDLE

W2043

Ultra bright, multi position torch. 2 position handle can be used as pistolstyle or conventional torch. Car &home chargers included.

RECHARGEABLE TORCH2 MILLION CANDLE

W2044

Multi position torch. 2 position handle.Beam carries for more than a mile.

LAMP VEHICLEROTATING 1

W2045

12V magnetic Beacon supplied with2.6m cord and cigarette lighter plug.

LAMP VEHICLEROTATING

W2046

12V revolving amber light withstrong magneticbase. Supplied with2m cord andcigarette lighter plug.Low cost version.

KRYPTON TORCHW2040

High Power, lightweight, water resistanttorch with krypton bulb. Supplied with 1 x 996 battery

WORKLIGHTMAGNETIC

W2047

12V, durable plastic body, robustpolycarbonate lens.

FLOODLIGHTPORTABLE

W2048

• 500W/ 110V• Supplied complete with 3m cable,

16 amp plug & tungsten/ halogen tube

FLUORESCENT LIGHTW2052

• 110V, single 1.5m (5ft) tube• IP65 rated, 58w encapsulated

fluorescent fitting• Tough polycarbonate lens• Fitted with 5m cable and plug• IP44 rated power take off points• Fully powder coated fixed leg tripod

HALOGEN TUBEREPLACEMENT

W2051

FLOODLIGHT TELESCOPIC

• 500W/ 110V• Adjustable telescopic tripod• Weatherproof lamps• Supplied complete with 1.8m mains

lead, plug & Tungsten/ Halogen tubes

• 22m x 2.5m 110V cable complete with16 amp plug

• 10 lamp holders and guards, 2m apart• Intended for internal use only• 60w ES bulbs sold separately

FESTOON LIGHTING

SINGLE HEADW2049

FESTOON LIGHTINGW2054

GUARD REPLACEMENTW2055

60W ES BULBW2056

TWIN HEAD W2050

FLUORESCENTFLOOR LIGHT

W2053

• Two 600mm (2ft) tubes• IP65 rated, 18 watt encapsulated

fluorescent fitting• Tough polycarbonate lens• Fitted with 5m cable and clear view

plug• Supplied with IP44 rated power take

off points• Fully powder coated collapsible tripod


126

09. Site Equipment

SPLITTER BOX 4 WAYW2069

110V metal body splitter, fitted with 4 x16amp sockets and 3M cable.

SPLITTER 3 WAY 110VW2067 SPLITTER 3 WAY 240VW2068

SOCKET 240VW2062

HARD WIRE SOCKET110V

W2063

TRAILING SOCKET &CABLE SET

W2017

Fused adaptor converts 16Amp socketto 13Amp 3 pin socket.

RESIDUAL CURRENTDETECTOR (RCD)

W2087

Cuts powerautomatically toprotect againstelectrocution.Plugs straight into13Amp socket.Suitable forindoor andoutdoor electricalappliance. MeetsBS7071: 1992.

HARD WIRE SOCKET240V

W2064

EXTENSION CABLEREEL 230V

W2078

Composite reel fitted with 2 x 230Vpower sockets and 3 pin plug. Length: 10 metres

EXTENSION CABLE110V

W2057

Size: 14 metre x 1.5mm


W2058

110V reel fitted with 2 BSEN60309sockets, heavy duty plug and durablesteel frame. Length: 25m

EXTENSION LEADFUSED

W2086

4 fused sockets, black extension lead.Length: 5 metes.

PLUG 110VW2059 PLUG 240VW2060

SOCKET 110VW2061


Heavy duty 230V reel fitted with 2sockets and metal frame. Available withthermal trip. Heavy duty 230V reel fitted with RCD

Adaptor. Available with thermal trip.

EXTENSION CABLE REELWITH RCD ADAPTOR

W2081

EXTENSION LEAD

25 METREW2079

1 SOCKET X 5M W2082

2 SOCKETS X 5M W2083

4 SOCKETS X 2MW2084

6 SOCKETS X 2MW2085

50 METREW2080

PANEL SOCKET 240VW2066PANEL SOCKET 110VW2065


127

09. Site Equipment

Highway trailer, equipped with braking an road lighting system to conform with EEC Directives.Fitted with hydraulic hand pump operated lift/ lower systems as standard. When the drum isfully raised mechanical locks ensure drum security in transit.

Payload 2350 kgGross Veh. Weight 3100 kgMax Drum Width 1280mmDrum Dia max/min 2500/1060Spindle Dia 76mmTow Eye/ Coupling Height Unladen 50/610Trailer Width 2300Towing Speed (max) 100Kmh Tyres 7.50x16Brake System Overrun

Auto reverseOther sizes available

CABLE DRUM TRAILER

CABLE DRUM JACK

Screw type jack with base plate designed to give stability even on soft ground.

CODE CAPACITY MIN DRUM MAX DRUM BASE WEIGHT/PAIR DIA DIA /PAIR

W2074 3 TONNE 1060mm 1600mm 300x300mm 37KG

W2075 6 TONNE 1360mm 1900mm 460x300mm 45KG

W2076 SPINDLE (FOR 3 TONNE JACK) Diameter: 50mm Length: 1219mm

W2077 SPINDLE (FOR 6 TONNE JACK) Diameter: 50mm Length: 1800mm

TRAILERW2100

TRAILER REFURBISHEDW2101

WINCH KN1000

A lightweight, portable, hand operated cabling winch for lightcables and ropes.

Engine Petrol, Briggs & StrattonPower 12.5HP @ 3600 revs/ minTorque 20.8ft lbs @ 2500 revs/ minSpeed Control By engine throttle control onlyRope Diameter 5 - 8mmLine Tension 1000 kg maxLine Speed 27m/ min (unladen)Weight 86 kgDimensions 1010(l) x 430(w) x 950(h) mm

KN1000W2110 KN1000 REFURBISHEDW2111

Used to dispense and recoverDrawrope No 1.

STAND DRAWROPEE3491

DISPENSER “A” FRAME

E3206


DISPENSERDROPWIRE 2B

E2091

A tubular steel framed DropwireDispenser with an adjustabletensioning device to prevent overrun ofthe drum. The drum is held by meansof a spring loaded spindle.

DISPENSERDROPWIRE 1

E2092

Used with Dispenser Dropwire to aidthe dispensing of Sash Line. It is arevolving drum on a spindle with awinding handle.

DISPENSER SASH LINE

E2093

A wheel version ofDispenserDropwire No 1 witha fold away handle.

DISPENSER 1AT5250

A tubular steelframed dispenserfor dispensingWire Jumper andsmall drums ofcable.


Cables

Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


10. Power Tools Cordless Drills

Cordless Screwdrivers

Cordless Hammerdrills

Impact Hammerdrills

Rotary Hammerdrills

Jigsaw

Grinders

Powerbox

Drill Bits

Chisels

10 power tools 14/8/09 17:00 Page 1

130

10. Power Tools

CORDLESS COMBI DRILL GSB 14.4V VE2P1002

Battery Voltage 14.4VCharging Time 30 minCharger 240V 50/60HzMax Screw Diameter 8mmDrill Diameter in Steel 13mmDrill Diameter in Wood 32mmNo Load speed 1st Gear 0-500rpmNo Load speed 2nd Gear 0-1750rpmMax Torque 50NmWeight 2.5kg

Supplied with extra 2.6 Ah NiMH battery,quick charger, Keyless chuck and carryingcase.

Multi-function tool forimpact drilling andscrewdriving. High-performance impactmechanism and highspeed for rapid drillingrate in masonry. Hightorque of up to 65 Nmfor large drilling/screwdiameters.

CORDLESS DRILL DRIVER GSR 14.4V-LIP1014

Max Screw Diameter 7mmDrill Diameter in Steel 13mmDrill Diameter in Wood 32mmNo Load Speed 1st Gear 0-450rpmNo Load Speed 2nd Gear 0-1450rpmBattery Voltage 14.4VCharging Time 30 minsWeight 1.7kg

Supplied with 2 x 2.6 Ah Li-Ion batteries,quick charger, Keyless chuck and carryingcase.

Powerful, compactand handy for workin tight spaces.

CORDLESS IMPACT DRILL DRIVER GDR 14.4V P1015

This Drill has a 3 fold adjustable light andis supplied with Charger AL 1450, 2 x 2.6Ah NiMH battery pack, Belt Clip, HandLoop, Rubber Ring and Carrying Case.

Screw Diameter M6 – M16Max Torque 135 NmNo Load, 1st Gear 0-2,800 rev/minRate Impact Rate 3200/ minCharging 30 minsWeight 1.80kg

COMBI DRILL 18V GSB 18VE2 PROFESSIONALP1003

Max Screw Diameter 10mmDrill Diameter in Steel 13mmDrill Diameter in Wood 45mmNo Load speed, 1st Gear 0-500rpmNo Load speed 2nd Gear 0-2050rpmBattery Voltage 18VCharging Time 30 minWeight 3kg

Supplied with extra battery, quick charger,Keyless chuck and carrying case.

Multi-function tool forimpact drilling andscrewdriving. High-performance impactmechanism and highspeed for rapid drillingrate in masonry. Hightorque of up to 75 Nmfor large drilling/screwdiameters.

CORDLESS DRILL 24V COMBI GSB 24VE2P1004

Battery Voltage 24VCharging Time 30 min Max Screw Diameter 12mmDrill Diameter in Steel 16mmDrill Diameter in Wood 38mmNo Load Speed, 1st Gear 0-500rpmNo Load Speed 2nd Gear 0-1800rpmWeight 3.2kg

Supplied with extra 2.6 Ah NiMH battery,quick charger, Keyless chuck and carryingcase.

• Rotary Drilling• Screwdriving• Impact Drilling • Reverse

CORDLESS DRILL DRIVER GSR 18V LIP1016

Torque Max 56NmMax Screw Diameter 8mmDrill Diameter in Steel 13mmDrill Diameter in Wood 32mmNo Load Speed, 1st Gear 0-500rpmNo Load Speed 2nd Gear 0-1600rpmBattery Voltage 18VCharging Time 1 hourWeight 1.6kg

Supplied with 2 x 1.3 Ah Li-Ion batteries,quick charger, Keyless chuck and carrying case.

CORDLESS DRILL 36V GSB 36 V-LI P1017

Turbo charge ensures that 36V battery ischarged to 80% after just 25 mins.

Max Screw Diameter 12mmTorque Settings 15No-load speed 1st Gear 0-450 rev/minNo-load speed 2nd Gear 0-1500 rev/minDrilling Diameter in Wood 50mmDrilling Diameter in Steel 16mmDrilling Diameter in Masonry 16mmBattery Charging Time 45 minsWeight incl. Battery 3.20 kgs

Supplied with, Quick charger AL 3640 CV, 2x 1.3 Ah Li-Ion batteries, Keyless chuck,Auxiliary handle & Carrying case.

High-performance impactmechanism and high speed forrapid drilling rate in masonry.This lightweight but robustdrill is supplied with36V Lithium Ionbattery whichprovides enormouspower – it drives10mm screws without adrop in speed and up to 450 screws (6 x60mm in softwood) with one battery charge.

CORDLESS DRILL DRIVER GSR 10.8 V-LI2P1012

Same power as a standard screwdriver butonly 50% of the size due to the lithium-iontechnology.

Battery Capacity 1.3 AhBattery Voltage 10.8VCharging Time 30 minNo-Load Speed 0-400 rpmScrew Diameter (max) 7mmWeight (including battery) 1.1kg


131

10. Power Tools

CORDLESS HI SPEC HAMMERDRILL 24VP1019

• 2 speed gearbox• 13mm Keyless Chuck• Reverse• Speed Changeover• Adjustable Handle• Torque Control• Spare Battery• Charger• Carry Case

No Load Speed 0-500/ 0-1400 rpmBlows/ min 0-8000/ 0-22400Max Drill Depth Wood 80mmMax Drill Depth Steel 13mmMax Drill Depth Masonry 15mmBattery Voltage 24V

MAKITA CORDLESS ROTARY HAMMERDRILL 24V SDS+ P1031

Max in Steel 13mm Max in Wood 27mm Max in Concrete 20mm Joules 2.1Js No Load Speed 0-1,100rpm Blows per minute 0-4,700bpmBattery Voltage 24V Charging Time 1 Hour Weight 4.1kg

Supplied with charger, battery cartridge, depth gauge and side handle.

CORDLESS HAMMERDRILL 24V GBH 24 VRE P1020

Sturdy and powerful Cordless Rotary Hammerdrill.

Features:• Overload clutch • Low vibration hammer mechanism• SDS-plus system • Electric motor brake • Dustproof toolholder • Double battery lock • Auxiliary handle with adjustable depth stopcan be rotated 360°

Power input 350WPower output: 270WImpact rate at rated speed 0-4400 rpmRated speed 0-1000 rpmSingle impact force 1,3JBattery voltage capacity 24 V/3.0AHOptimum drilling range 4-14mmDrill diameter with SDS-plus Flute drill bits in concrete 4-20mmin steel 4-10mmin wood 4 -20mmWeight 4.2kg

Supplied with:Quick Charger AL2498 FC1 x 3.0 Ah NiCd Battery PackAuxiliary HandleDepth StopCarrying Case

DEWALT CORDLESS HAMMERDRILL 24VP1018

Voltage 24VPower Output 300 WattsBattery Output NiCd 2.0 AhNo Load Speed 0-1000rpmTool holder SDS PlusMax Drill Diameter in Wood 30mmMax Drill Diameter in Metal 13mmMax Drill Diameter in Concrete 22mmWeight 3.8kg

Standard Kit includes:• 1 hour charger • 2 batteries • Multi-position side handle • Grease • Heavy duty carrying case

CORDLESS HAMMERDRILL 24V GBH 24VFRP1021

Power Input 350WBattery Voltage 24V Impact rate at rated speed 0-4400rpmImpact Force 1.3JDrilling Depth in Wood 20mmDrilling Depth in Steel 10mmDrilling Depth in Concrete 20mm Weight 4.2kg

Sturdy, powerful and versatile RotaryHammerdrill.

Features:• Overload clutch • Low vibration hammer mechanism• SDS-plus system • Electric motor brake • Dustproof toolholder • Double battery lock • Auxiliary handle with adjustable depth stopcan be rotated 360°

Features:• 3 functions: hammer drill, rotary drill and chisel• D-handle design for greater lower and accuracy• D-handle design with ergonomic rubber grip forin-line operation for maximum power and comfort• One touch sliding chuck for easy bit installation.


132

10. Power Tools

HAMMERDRILL CORDLESS 24V GBH 24VF P1022

Compact Multi-purpose toolfor hammering and drilling.Low weight and compactdesign for convenient work.

Power input 350WPower output: 270WImpact rate at rated speed 0-4400 rpmRated speed 0-1000 rpmSingle impact force 1,3JBattery voltage capacity 24 V/2.6AHOptimum drilling range 4-14mm

Drill diameter with SDS-plus Flute drill bits in concrete 4-20mmin steel 4-10mmin wood 4 -20mmWeight 3.9kg

Features:

• More than 120 holes in concrete 6x40 mm with onebattery charge

• Electric motor brake • Forward/reverse rotation sliding switch with switch-on lock • With chisel attachment MV 200 also suitable for chiselling

Supplied with:Quick Charger AL2450 DV2 x 2.6 Ah NiMH BatteriesAuxiliary HandleDepth StopQuick-change chuck with adaptorQuick-change chuck SDS-plusCarrying Case

IMPACT HAMMERDRILL 701W GSB 1600RE

Power Input 701WNo Load Speed 0-3000 rpmDrilling Diameter in Wood 30mmDrilling Diameter in Steel 12mmDrilling Diameter in Masonry 18mmWeight 1.9kg

Supplied with Keyless chuck, Auxiliary handle, Depth stop & Carrying case.• 1 speed• Softgrip• Metal quick-change chuck

IMPACT HAMMERDRILL GSB 1600RE 240VP1023

IMPACT HAMMERDRILL GSB 1600RE 110VP1024

IMPACT HAMMERDRILL 800W GSB 20-2RE

Power Input 800WNo Load Speed 0-1100/ 3000 rpmPower Output 420WImpact Rate at Rated Speed 17.600 – 48,000 rpmChuck Capacity 13mm KeylessDrilling Diameter in Wood 40mmDrilling Diameter in Steel 13mmDrilling Diameter in Masonry 22mmDrilling Diameter in Concrete 20mmWeight 2.50kg

Supplied with: Quick change chuck 13 mm, Auxiliary handle, Depth stop &Carrying case

Bosch high-performancemotor with high torque forhard drilling and screwdrivingwork, core cutting,holesawing and stirring.Speed preselection withsetting wheel. Rotating brushplate for constant power inreverse and forward rotation. IMPACT HAMMERDRILL 800W GSB 20-2RE 110VP1025

IMPACT HAMMERDRILL 800W GSB 20-2RE 240VP1026

IMPACT HAMMERDRILL 1010W GSB 22-2RE

Rated Power Input 1010WNo Load Speed 10-1000/ 2800 rpmPower Output 530W Recommended Drilling Range 4-12mmDrilling Diameter in Concrete 22mmDrilling Diameter in Wood 40mmDrilling Diameter in Steel 16mmDrilling Diameter in Masonry 24mm Clamping range 1.5 - 13 mm Spindle collar diameter 43 mm Weight 2.8kg

Supplied with: Quick change chuck 13 mm, Auxiliary handle, Depth stop & Carrying case

2 speed, high-torque Boschhigh-performance motor withoptimised cooling for the hardestdrilling and screwdriving work,core cutting, holesawing andstirring. The overload clutch Anti-Rotation means that even hightorques are under control.

IMPACT DRILL GBH22-2RE 110VP1027

IMPACT DRILL GBH22-2RE 240VP1028


133

10. Power Tools

ROTARY SDS PLUS HAMMER DRILL 650W GBH 2-23RE

Power Input 650WNo Load Speed 0-1100Power Output 280WImpact Rate at Rated Speed 0-4400 rpmDrilling Diameter in Wood 30mmDrilling Diameter in Steel 13mmDrilling Diameter in Masonry 68mmWeight 2.30kg

Supplied with: Quick change chuck, Auxiliary handle, Depth stop & Carrying case• SDS-Plus• Control Electronic• Overload Clutch• Softgrip

IMPACT SDS HAMMERDRILL 650W GBH 2-23RE 110VP1029

IMPACT SDS HAMMERDRILL 650W GBH 2-23RE 240VP1030

ROTARY HAMMERDRILL 800W GBH 2-26 DRE

Power Input 800WImpact Rate at Rated Speed 0 – 4000 rpmNo Load Speed 0-900 rpmImpact Energy 3JDrilling Range 8-16mmDrilling Diameter in Wood 30 mmDrilling Diameter in Steel 13 mmDrilling Diameter in Concrete 26mmDrilling Diameter in Masonry 68mmDrilling Diameter in Concrete with 4-26mmSDS Flute drill bitWeight 2.7kg

ROTARY HAMMERDRILL 800W GBH 2-26 DRE 110VP1041

ROTARY HAMMERDRILL 800W GBH 2-26 DRE 240VP1042

CORDLESS ROTARY HAMMERDRILL GBH 36V-LI P1040

Due to its lithium-ion technology and new pneumatic impact mechanism (3 J), it drills as fast asthe best 2-kilo mains-powered hammer. It drills holes up to 26 mm and can also chisel a cableduct using the integrated chisel function. Thanks to the 36-V Lithium-Ion high-performancebattery pack it can drill up to 150 holes with one battery charge (6 x 40 mm in concrete B25).Turbo charge ensures that 36V battery is charged to 80% after just 25 mins.

Rated Power Input 600WImpact Rate at Rated Speed 0-4.260 rpmRated Speed 0-960 rpmPower Output 430WSingle Impact Force 3JSpindle Collar 50mmBattery Capacity 2AhWeight incl. battery 4.30 kgs

Drill diameter with SDS Flute Drill Bits:In Concrete 4-26mmIn Steel 4-13mmIn Wood 4-30mmRecommended Drilling Range 6-16mm

Supplied with: Quick charger AL 3640 CV 1 x 2.0 Ah Li-Ion batteries, Auxiliary handle, Depth Stop & Carrying case

Supplied with:Auxiliary handle, Depth stop & Carrying case


134

10. Power Tools

HAMMERDRILL ROTARY SDS MAX GBH 5-40DCE

Features:• Setting wheel for optimum power• 2 stage vibration damping system for fatigue free work• Protection again cable breaks• Lockable switch pawl• Constant Electronic, Vario-Lock, Service & Standby Display

Power Input 1100WImpact Energy 2 - 9JImpact Rate at Rated Speed 1500-3050 rpmThis sturdy hammer with SDS-max toolholder

produces top performance when drilling up to40mm diameter. Extremely high materialremoval rate when chiselling thanks to Turbo-Power with up to 20% higher single impactforce (10 J). Long lifetime, even in heavy-dutyapplications, as a result of the sturdy metalhousing and compact design.

HAMMERDRILL ROTARY GBH 5-40DCE 110VP1045

HAMMERDRILL ROTARY GBH 5-40DCE 240VP1046

HAMMERDRILL ROTARY SDS GBH 7-46 DE 110VP1047

HAMMERDRILL ROTARY SDS GBH 7-46 DE 240VP1048

HAMMERDRILL ROTARY SDS MAX GBH 11DE

Features:• Overload clutch • Cut-off carbon brushes • Variable auxiliary handle • Setting wheel for preselecting speed• Variable chisel fitting in 12 angle positions • Service display

Power Input 1500WImpact Energy 5 – 18JPower Output 920WRated Torque 200NmImpact Rate at Rated Speed 1.100-2.250 rpm

Recommended Drilling Range 30-52mmDrilling Diameter in Concrete with:SDS-max Flute Drill Bits 12-52mmSDS Max Core Cutters 40-150mmWeight 11.1kg

HAMMERDRILL ROTARY SDS MAX GBH 11 DE 110VP1049

HAMMERDRILL ROTARY SDS MAX GBH 11 DE 240VP1050

CORDLESS JIGSAW GST 24VP1060

Features• SDS for rapid, easy saw blade changes • Low-vibration • Accelerator function• Ergonomic bow handle with softgrip

Supplied with: • Quick charger AL 2450 DV• 2 x 2.6 Ah NiMH batteries• 3 saw blades • 1 splinter guard • Allen key • Guide rail adapter • Carrying Case

HAMMERDRILL SDS MAX GBH 7-46DE

Features:• Individually controllable speed• Lockable switch pawl in chiselling• Ergonomic auxiliary handle

The most powerful hammer in its class withextremely high material removal rate whenchiselling due to Turbo-Power with a singleimpact force of up to 15J.

Powerful universal hammer for rapid drillingand chiselling. Best drilling performancethanks to optimised hammer mechanismtechnology and high performance motor.Low-vibration impact mechanism for fatigue-free working. SDS-max toolholder for safeand fast locking, compact transfer of torquewith integrated dust protection.

Power Input 1350WImpact Energy 2-13JPower Output 800WImpact Rate at Rated Speed 1375-2800 rpmNo Load Speed 145-280rpm

Recommended Drilling Range 25-40mmDrilling Diameter in Concrete with:-SDS Max Flute Drill Bits 12-45mmSDS Max Core Cutters 40-150mmWeight 8.2kg

Supplied with:Carrying case, Auxiliary handle,Machine cloth & Grease tube.

Drilling Diameter in Concrete with:SDS-max Flute Drill Bits 12-40mmSDS Max Core Cutters 40-90mmWeight 6.8kg

Supplied with:Carrying case, Auxiliary handle,Machine cloth & Grease tube.

Supplied with: Carrying case, Auxiliary handle,Machine cloth & Grease tube.


135

10. Power Tools

ANGLE GRINDER 9” GWS 20-230

Power Input 2000WDisc Diameter 230mmNo load speed 6,500rpm

Rubber Backing Pad 170mmSpindle Thread M14Weight 4.2kg

POWERBOX GML 24V-CD BATTERY CHARGER P1080

This power box does not just charge batteries of all Bosch 12 – 24 Volt battery packs but alsoplays CD’s, MP3’s and Radio so you can listen to music whilst working. It has one 12V socketand two standard sockets and is housed in aluminium frame.

Total Weight 8.5kgInput/ output voltage mains 230VCharge current 1.1A

ANGLE GRINDER 110VP1061

ANGLE GRINDER 240VP1062

METAL GRINDING DISC 230MMP1063

METAL CUTTING DISC 230MM P1064

STONE CUTTING DISC 230MMP1065

DIAMOND BLADE CONCRETE 230MMP1066

DIAMOND BLADE TARMAC 230MMP1067

MINI GRINDER 41⁄2” GWS 8-115

Power Input 800WDisc Diameter 115mmNo Load Speed 11,000rpm

Spindle Thread M14Weight 1.55kg

MINI GRINDER 115MM 110VP1070

MINI GRINDER 115MM 240V P1071

METAL GRINDING DISC 115MMP1072

METAL CUTTING DISC 115MMP1073

STONE CUTTING DISC 115MMP1074

DIAMOND BLADE CONCRETE 115MMP1075

DIAMOND BLADE TARMAC 115MMP1076

BOSCH DRILL BIT SET

These Bosch HSS Drill Bit Sets include acombination of different Drill Bits for use withwood, metal and stone, available in thefollowing sizes:

BOSCH 10 PIECE SET 1.0 - 10.0 X 1.0MM P2095

BOSCH 13 PIECE SET 1.5 - 6.5 X 0.5MMP2096


136

10. Power Tools

DRILL BITS - MASONRY

High quality straightshank Masonry DrillBits suitable fordrilling in to brick andconcrete. Available inthe following sizes:

DRILL BIT MASONRY 5.0 X 100MM





































P2001

P2002

P2003

P2004

P2005

P2006

P2007

P2008

P2009

P2010

P2011

P2012

P2013

P2014

P2015

P2016

P2017

P2018

P2019

P2020

P2021

P2022

P2023

P2024

P2025

P2026

P2027

P2028

P2029

P2030

P2031

P2032

P2033

P2034

P2035

P2036

P2037

SDS PLUS MASONRY DRILL BITS

High quality SDSshank Masonry DrillBits have a doubleflute designed toimprove dustremoval. SDS DrillBits can only beused on Drills thathave a SDS Shank.

DRILL BITS SDS MASONRY 4.0 X 110MM DRILL BITS SDS MASONRY 4.0 X 160MM DRILL BITS SDS MASONRY 5.0 X 110MM DRILL BITS SDS MASONRY 5.0 X 160MM DRILL BITS SDS MASONRY 5.5 X 110MM DRILL BITS SDS MASONRY 5.5 X 160MM DRILL BITS SDS MASONRY 5.5 X 210MM DRILL BITS SDS MASONRY 6.0 X 110MM DRILL BITS SDS MASONRY 6.0 X 160MM DRILL BITS SDS MASONRY 6.0 X 210MM DRILL BITS SDS MASONRY 6.5 X 110MM DRILL BITS SDS MASONRY 6.5 X 160MM DRILL BITS SDS MASONRY 6.5 X 210MM DRILL BITS SDS MASONRY 7.0 X 110MM DRILL BITS SDS MASONRY 7.0 X 160MM DRILL BITS SDS MASONRY 7.0 X 210MM DRILL BITS SDS MASONRY 8.0 X 160MM DRILL BITS SDS MASONRY 8.0 X 210MM DRILL BITS SDS MASONRY 8.0 X 460MMDRILL BITS SDS MASONRY 10.0 X 160MM DRILL BITS SDS MASONRY 10.0 X 210MM DRILL BITS SDS MASONRY 10.0 X 460MM DRILL BITS SDS MASONRY 10.0 X 600MM DRILL BITS SDS MASONRY 12.0 X 160MM DRILL BITS SDS MASONRY 12.0 X 210MM DRILL BITS SDS MASONRY 12.0 X 460MM DRILL BITS SDS MASONRY 12.0 X 600MM DRILL BITS SDS MASONRY 12.0 X 1000MM DRILL BITS SDS MASONRY 13.0 X 160MM DRILL BITS SDS MASONRY 14.0 X 210MM DRILL BITS SDS MASONRY 14.0 X 460MM DRILL BITS SDS MASONRY 14.0 X 600MM DRILL BITS SDS MASONRY 16.0 X 210MM DRILL BITS SDS MASONRY 16.0 X 460MM DRILL BITS SDS MASONRY 16.0 X 600MM DRILL BITS SDS MASONRY 16.0 X 1000MM DRILL BITS SDS MASONRY 18.0 X 210MM DRILL BITS SDS MASONRY 18.0 X 460MM DRILL BITS SDS MASONRY 18.0 X 600MM DRILL BITS SDS MASONRY 20.0 X 210MM DRILL BITS SDS MASONRY 20.0 X 460MM DRILL BITS SDS MASONRY 20.0 X 600MM DRILL BITS SDS MASONRY 20.0 X 1000MM DRILL BITS SDS MASONRY 22.0 X 260MM DRILL BITS SDS MASONRY 22.0 X 460MM DRILL BITS SDS MASONRY 22.0 X 600MM DRILL BITS SDS MASONRY 22.0 X 1000MM DRILL BITS SDS MASONRY 24.0 X 260MM DRILL BITS SDS MASONRY 24.0 X 460MM DRILL BITS SDS MASONRY 24.0 X 600MM DRILL BITS SDS MASONRY 24.0 X 1000MM DRILL BITS SDS MASONRY 25.0 X 260MM DRILL BITS SDS MASONRY 25.0 X 460MM DRILL BITS SDS MASONRY 25.0 X 600MM DRILL BITS SDS MASONRY 25.0 X 1000MM DRILL BITS SDS MASONRY 28.0 X 460MM DRILL BITS SDS MASONRY 30.0 X 460MM

P2038P2039P2040P2041P2042P2043P2044P2045P2046P2047P2048P2049P2050P2051P2052P2053P2054P2055P2056P2057P2058P2059P2060P2061P2062P2063P2064P2065P2066P2067P2068P2069P2070P2071P2072P2073P2074P2075P2076P2077P2078P2079P2080P2081P2082P2083P2084P2085P2086P2087P2088P2089P2090P2091P2092P2093P2094


137

10. Power Tools

These high quality Auger bits have a hex shank, and can be used in bothDrill and Screwdriver chucks.

DRILL BITS WOOD AUGER 6.0 X 235MM DRILL BITS WOOD AUGER 6.0 X 450MM DRILL BITS WOOD AUGER 8.0 X 235MM DRILL BITS WOOD AUGER 8.0 X 450MM DRILL BITS WOOD AUGER 10.0 X 235MM DRILL BITS WOOD AUGER 10.0 X 450MM DRILL BITS WOOD AUGER 12.0 X 235MM DRILL BITS WOOD AUGER 13.0 X 235MM DRILL BITS WOOD AUGER 13.0 X 450MM DRILL BITS WOOD AUGER 14.0 X 235MM DRILL BITS WOOD AUGER 16.0 X 235MM DRILL BITS WOOD AUGER 16.0 X 450MM DRILL BITS WOOD AUGER 18.0 X 235MM DRILL BITS WOOD AUGER 19.0 X 235MM DRILL BITS WOOD AUGER 20.0 X 235MM DRILL BITS WOOD AUGER 22.0 X 235MM DRILL BITS WOOD AUGER 22.0 X 450MM DRILL BITS WOOD AUGER 24.0 X 235MM DRILL BITS WOOD AUGER 25.0 X 235MM DRILL BITS WOOD AUGER 25.0 X 450MM DRILL BITS WOOD AUGER 28.0 X 235MM DRILL BITS WOOD AUGER 30.0 X 235MM DRILL BITS WOOD AUGER 32.0 X 235MM

P2097P2098P2099P3000P3001P3002P3003P3004P3005P3006P3007P3008P3009P3010P3011P3012P3013P3014P3015P3016P3017P3018P3019

DRILL BITS WOOD AUGER

SDS Wood Augers are used in SDS chucks only, which are springloaded and increase productivity.

DRILL BITS SDS WOOD AUGER 6.0 X 235MM DRILL BITS SDS WOOD AUGER 8.0 X 235MM DRILL BITS SDS WOOD AUGER 10.0 X 235MM DRILL BITS SDS WOOD AUGER 13.0 X 235MM DRILL BITS SDS WOOD AUGER 16.0 X 235MM DRILL BITS SDS WOOD AUGER 19.0 X 235MM DRILL BITS SDS WOOD AUGER 22.0 X 235MM DRILL BITS SDS WOOD AUGER 25.0 X 235MM

P3020P3021P3022P3023P3024P3025P3026P3027

DRILL BITS WOOD AUGER SDS

CHISEL ATTACHMENTSDS

P3050

Used to change Bosch Rotary S.D.SDrill into a chisel.

CHISEL BOSCHFITTING

P3051

28mm Hex. Length: 380mm.

POINT BOSCHFITTING

P3052

28mm Hex. Length: 380mm.

CHISEL SDS MAX

Fits all SDS Max machines. 18mm Round.

360MMP3053

500MMP3054

600MMP3055

POINT SDS MAX

Fits all SDS Max machines. 18mmRound.

360MMP3056

500MMP3057

600MMP3058

WIDE CHISEL SDS MAX

Fits all SDS Max machines. 18mmRound.

50 X 300MMP3059

75 X 300MMP3060

CHANNELING CHISELSDS MAX

P3061

Fits all SDS Max machines. 18mmRound. Size: 300mm


Cables

Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


11. Safety Signs

Road Cones

Barrier Systems

Personal Safety

First Aid

Gas Detection

11 safety 12/8/09 10:50 Page 1

140

11. Safety

ROAD SIGN MEN ATWORK

S2001

Size: 750mm

ROAD SIGN KEEPLEFT/ RIGHT

S2002

Complete with reversible flap toindicate the traffic to keep left or right.Size: 750mm.

ROAD SIGN ROADNARROWS LEFT/ RIGHT

S2003

Complete with reversible flap toindicate road narrowing left or right.Size: 750mm.

ROAD SIGNPEDESTRIAN

S2004

Complete with reversible flap toindicate either left or right. Size: 600 x 450mm.

MEN AT WORKS2101

KEEP LEFTS2102

KEEP RIGHTS2103

ROAD NARROWS LEFTS2104

ROAD NARROWS RIGHTS2105

PEDESTRIAN LEFT S2106

PEDESTRIAN RIGHTS2107

ROAD SIGNS CONE TYPE

Size: 600 x 450mm

Size: 600 x 450mm

MEN AT WORKS2201

KEEP LEFTS2202

450MM (18”)S2120

750MM (30”)S2121

BARRIER BOARD REFLECTIVES2124

KEEP RIGHTS2203

ROAD NARROWS LEFTS2204

ROAD NARROWS RIGHTS2205

PEDESTRIANS2206

FOOTPATH CLOSEDS2207

ROAD SIGNS ZINTEC

Metal, reflective signs mounted onzintec coated frames.Size: 750mmOther signs available on request

Size: 600 x 450mm

Size: 600 x 450mm

ALL TRIPOD SIGNS CONFORM TO CHAPTER 8 REGULATIONS. SIGN TRIPODS TO BE ORDERED SEPERATELY.

SIGN TRIPODS2005

Tripod for supporting the completerange of ‘roll-up’ road signs.

ROAD CONESLOTTED

S2122

750mm (30") heavyduty slotted roadcone designed foruse with slot-inbarrier boards andcone adaptors tocreate a temporarybarrier system.Supplied completewith Des 2 sleeve.

ROAD CONEADAPTOR

S2123

Used to adapt the topof slotted road cone toaccommodate the useof a barrier board.

SLOTTED CONE BARRIER SYSTEMS2119

Length: 2 metres.

(complete system)

ROAD CONES

Heavy duty, 100% recycled cones,virtually indestructible, and designedfor maximum stability, ease of handlingand storage. Ideal for use in mosttraffic control situations on roads andemergency works. Supplied withreflective sleeves to meet BS873 Part6 1983 Table 2.

Standard, lightweight road cone signs manufactured from impact resistant polypropylene sheeting with integral fold-away flapwhich is simply inserted over the road cone. Size: 750mm. Other signs available on request

Other signs available on request

11 safety 12/8/09 10:50 Page 2

141

11. Safety

MULTI-CONESS2127

Extending multi-cones consisting of 6reflective blades which whencompressed measure only 260mm x310mm and when expanded they arewide enough to close off one lane. Length: 2.7mWeight: 4.5kg

BARRIER SYSTEM

High quality, low maintenance, vandal resistant barrier system with aunique patented locking mechanism. The settings can be adjusted toaccommodate uneven surfaces. Fully complies with Chapter 8 and BS 873. Complete system consists of:2 x Heavy-duty 8kg base with handgrips for easy carrying2 x High impact U-PVC rigid and durable upright complete with a high

impact lamp bracket2 x Reflective barrier board 2 metres long

All parts can be ordered separately.

COMPLETE SYSTEMS2130

BARRIER BASES2131

BARRIER UPRIGHTS2132

BARRIER BOARDS2133

Titan Barrier was made using precision injection moulded construction, withcentral struts through out to give additional stability. Linking facility allowssystem to be easily joined. Swivel feet are attached to the barrier at point ofmanufacture to assure the highest level of stability in all weather conditions.

The Titan is an easy to use, assemble and store barrier system and isavailable in 2 metre or 1.5 metre lengths.

Features• Sub Zero impact testing • Balance Point Tested to 45 Degrees • Pull Tested to 3.2kg (single barrier) 7.5kg ( barriers) • Durability & Robustness tested to 4000kg • Designated area to add contractors name/logo • Facility to attach battery operated road danger lamps• Folding feet for better storage

1.5 METRESS2135

2 METRESS2136

SIGN PEDESTRIAN(GATEGUARD)

S2144

Supplied complete with clips forattaching to the gateguard.

A warning lightfor use at roadworks. Can beattached to roadcones or barriersystems.Switches fromflashing to static,single battery,photocell & LEDtechnology.

LAMP MONOS2125

Block type clip used to joint thegateguard panels. 4 clips required per3 sided gateguard.

GATEGUARD CLIPS2143

Robust, heavy duty,single battery lampoperated by contactswitch when placed

on cone. LED technology, photocell asstandard, polycarbonate lens.Manufactured to BS3143 part 2 and BS EN 12352.

LAMP CONELITES2126

A metre square manhole guardcomplete with reflective strip. Normallyassembled as either 3 or 4 sidedgateguard by means of block clips.

GATEGUARD

SINGLE PANELS2140

3 SIDEDS2141

4 SIDEDS2142

Manufactured fromheavy duty recycled PVCsegments, supplied oneblack and one yellowcomplete with bolt holes.Each segment measures500 x 500 x 70mm.

SPEED RAMP

FIXING BOLTS

SPEED RAMP 1M (2 SEGMENTS)S2150

END CAPS (PAIR)S2151

S2152

TITAN BARRIER SYSTEM

11 safety 12/8/09 10:50 Page 3

142

11. Safety

HELMET SAFETY 3A S4050

Safety helmet supplied to BS standard.It incorporates an adjustable headbandand can be used with a chinstrap. Othercolours can be supplied.

HELMET WITH VISORS4051

High quality helmet supplied completewith retractable eyeshield which fits intothe roof of the helmet and providesprotection to EN166 1F standard. Lensoptions: Clear or UV400 Smoke.

HELMET CHINSTRAP S4052

An adjustable elasticated chinstrap foruse with Helmet Safety.

HEAD TORCH W2041

Six high intensity LED's and a powerfulkrypton bulb. 3 functions: LED on, kryptonon and LED flash. Adjustable head strapand adjustable inclination.

EYESHIELD 3A S4054

A general purpose eyeshieldmanufactured from a soft plastic materialwhich moulds itself to the wearers face.

EYESHIELD 5 S4055

A spectacle type eyeshield with a rigidplastic frame and two folding side arms.

EAR DEFENDERS S4056

Ear protectors with an adjustableheadband. Can be used with HelmetSafety.

FACE MASKS4058

Disposable face mask, supplied in packof 50.

GLOVES LEATHER NO 1

S4060

Chrome leather gloves with full cottondenim backing, for use on most handlingoperations.

GLOVES FURNITURERIGGER

S4061

Hard wearing furniture hide rigger gloveswith cotton striped back.

GLOVES PVC 2 S4062

Gauntlet style PVC gloves with knittedwrist and waterproof non-slip surface.Most suitable for use on medium to lightwet and greasy work.

GLOVES IR 1000VS4063

Protective gloves for use when workingin the vicinity of power circuits up to1000 volts. Size: 36cm long.

GLOVES GRIPPERYELLOW

S4064

Knitted cotton gloves with criss-crossnon-slip grip.

GLOVES FINGERLESSS4065

100% Kevlar® gloves provide increasedprotection against cuts, slashes andabrasion whilst allowing free movement,maintaining a high degree of dexterity tothe wearer.

GLOVES LATEXS4066

Single use, lightly powdered, non-sterilelatex gloves. Supplied in box 100.

KNEE PADSS4057

Heavy duty knee pads with inner comfortpanel to absorb shock during wear.

11 safety 12/8/09 10:50 Page 4

143

11. Safety

SMALL 84 - 92S4000MEDIUM 92 - 100S4001LARGE 100 - 108S4002XL 108 - 116S4003XXL 116 - 124S4004XXXL 124 - 132S4005

JERKIN HIGH VISIBILITY

A high visibility waistcoat manufacturedfrom 100% Knitted Polyester with frontVelcro fastener. Length: 75cm.Manufactured to EN471 Class 2 spec.

Manufactured to EN471 Class 2 spec.

SIZE CHEST TOFIT (CM)

CODE

CODE CODE

CODE


TROUSERS HIGH VISIBILITY

A high visibility over-trouser made from PU coatedPolyester with elastic waist and cord adjuster, 2 largeVelcro fastened cargo pockets, side pocket accessand lower leg zip opening.Manufactured to EN471 Class 1, EN343 3,1 spec.

TERRAIN BOOT

Features deep cleat pattern rubber soleand steel safety midsole. Available withsupple leather uppers either with a HoneyNubuck or water repellent Black oiltanned finish. Fully complies with EN345. Sizes: 5 -12

SIZE WAIST TOFIT (CM)

SMALL 84 - 92S4020MEDIUM 92 - 100S4021LARGE 100 - 108S4022

XL 108 - 116S4023XXL 116 - 124S4024XXXL 124 - 132S4025

JACKET HIGH VISIBILITY

A high visibility padded jacket made from PU coated Polyester with warm quilted lining,internal Lycra storm cuff, Velcro cuff adjustment, concealed 3 piece hood, two way main zipand full length Velcro fastened double storm flap, 3 internal patch pockets and large Velcrofastened front pockets. Length: 93cm.Manufactured to EN471 Class 3, EN343 3,1 spec.





JERKIN HIGH VISIBILITY LONG SLEEVE

A long sleeve high visibility waistcoatmanufactured from 100% KnittedPolyester with front Velcro fastener.Length: 77cm.

HONEY NUBUCKS4035

BLACKS4036

DERBY BOOTS4037

This boot features Barton grain leatherupper, bellows tongue, leather paddedcollar, scuff cap for added durability, steelmidsole and toecap and RPU sole unitwhich is light, flexible and resistant to heat(300°), slip, abrasion and oil. Fullycomplies with EN345. Sizes: 6 -13

LEATHER TRAINING SHOES4038

Wide fit leather safety trainer shoe withdual density PU sole. Fully complies withEN345. Sizes: 3 -13.

WET SUIT

2 piece PVCrain suit withfixed hood,zipped frontand adjustableankles &wrists.

LARGES4032

XLS4033

XXLS4034

11 safety 12/8/09 10:51 Page 5

144

11. Safety

RIGGER BOOTS4039

This boot features full grain leather upperwith full fur lining, pull on tabs, steelmidsole and toecap and a PU doubledensity sole unit which is light, flexible, oilresistant and anti-static. Fully complieswith EN345. Sizes: 6 -13

PUROFORT BOOT

100% waterproof foamed polyurethaneboot with steel midsole and toecap andenergy absorbent, anti-static and oilresistant outsole. It has excellentinsulation properties and is available withor without fur lining. Fully complies withEN345 S5. Sizes: 6 -12

WITH FUR LININGS4040

WITHOUT FUR LININGS4041

BELT SAFETY 11

Work Positioning Belt• Triple action karabiner for added safety• Double action hook provides quick and

safe connection to harness ‘D’ ring• Rope strength in excess of 40kN

meets the requirements of EN 1891• Can be attached direct to suitable

anchorage point

Full Arrest Lanyard• Controlled release adjuster buckle to

ensure safe operation and adjustment• Double layer abrasion pad protects the

strap from damage• Velcro strap sewn to hand hold

provides a safe means of retainingloose end

• 40mm sliding loop keeps the strapslevel reducing premature webbingwear BELT SAFETY 11 ‘A’ (SMALL) <31” <35”S4080

WAIST CHEST

BELT SAFETY 11 ‘B’ (MEDIUM) 29”-38” 33”-42”S4081

BELT SAFETY 11 ‘C’ (LARGE) 36”-45” 40”-49”S4082

BELT SAFETY 11 ‘D’ (XL) 45”+ 49”+S4083

SAFETY HARNESSS4084

WORK POSITIONING BELTS4085

FULL ARREST LANYARDS4086

KNEEBOOT

Black heavy duty Polyflex upperwaterproof knee boot.

Designed for general purpose outdooruse.

Features steel toecap and grey oilresistant PVC nitrile sole. EN345.

Features steel toecap and midsole andgreen oil resistant PVC nitrile sole.EN345.

HEAVY DUTY NON-SAFETY BOOTS4042

SAFETY BOOTS4043

DUO-SAFE BOOTS4044

Belt Safety 11 consists of lightweight,multipurpose safety harness, workpositioning belt and full arrest lanyardprimarily (but not exclusively) for usewhen working on telegraph poles. Allthree items can be sold separately.Available in 4 sizes.

Safety Harness• Front and rear ‘D’s for fall arrest and

rescue• Work positioning side ‘D’s allow hands

free working • Velcro shoulder pads allow for

temporary attachment of lanyard andpole strap during climbing

• Curved stainless steel leg adjustersprovide fast and effective non slipadjustment

• Angled 75mm wide sit strap for addedcomfort

• Fully tested and approved to BS EN358 & 361

11 safety 12/8/09 10:51 Page 6

145

11. Safety

PACK OF 10S4072

PACK OF 25S4073

ENFORCER CALIBRATION KIT S5006

REPLACEMENT MULTI GAS CYLINDERS5007

1KGS4074

2KGS4075

FIRST AID KITS4070

A first aid kit suitable for up to 10 persons.Supplied in durable plastic case suitablefor wall mounting and mobile use.

Contains:1 First Aid Guidance Leaflet20 Waterproof Plasters2 Eye Pads with Bandage No.164 Triangular Bandages6 Sterile Dressings (Medium)2 Sterile Dressings (Large)12 Safety Pins2 Disposable Gloves (pairs)10 Alcohol Wipes

IMPACT MULTIGAS DETECTORS5005

Using high specification flammable,oxygen and patented Surecell™ toxicsensors this portable gas detector is ableto monitor and display up to four gasessimultaneously. It has a built-in motorisedpump for remote detection using therange of sampling accessories and thecompliance friendly Safelinkcommunications system. It is suppliedcomplete with 2 year life sensor cartridge,NiMH re-chargeable batteries, basestation and power supply, belt clip, quickstart user manual (printed), full operatingmanual (CD) and calibration certificate.

Configured to detect: Oxygen (O2): 0-25% v/v Flammable gas: 0-100% LELHydrogen sulphide (H2S): 0-50ppm Carbon monoxide (CO): 0-500ppm

Features: • Large, multi-lingual, backlit display with

intuitive menu • Ultra-bright alarm lights and a powerful

audible alarm • Vibrating alarm and built-in sampling

pump • Built-in correction factors for monitoring

a wide range of flammable gases • Plug in sensor cartridge can be

replaced in less than a minute • IP67 rated for protection against water

and dust ingress • Event logging for record keeping and

printing using the datalogging kit

ENFORCER CALIBRATION KIT

The Enforcer is a portable device into which is screwed a canister of traceable test gas.The gas detector is simply clipped into the Enforcer and in less than 2 minutes calibrationis complete. The gas detector will indicate pass or fail accordingly. The controlledexposure also greatly reduces test gas wastage with approximately 200 calibrationsavailable from each canister. It is supplied complete with multi gas canister and wallmounting bracket.

A replacement multigas cylinder contains a mixture of 2.2%v/v CH4, 100ppm CO,40ppm H2S and 15%v/v O2 to calibrated gas detectors configured to detect flammablegas (methane), oxygen, hydrogen sulphide and carbon monoxide.

LAMP SAFETY 1A S5000

A paraffin burning safety lampused to test the presence offoul air and asphyxiating gasesin underground chambers.

EYEWASH S4071

Size: 500ml.

FIRE EXTINGUISHER

Dry powder fire extinguishers to BS 5423

EYEWASH EYEPODS

Steriflow podsfor acid/ alkalicontaminationreturn eye tonatural phbalance. Size: 20ml.

11 safety 12/8/09 10:51 Page 7

146

11. Safety

WATER SAMPLING KIT

The UK Environment Agency guideline PPG20 requires the sampling of water fromunderground structures before de-watering can take place. This Water Sampling Kit wasproduced and tested specifically for this purpose. All equipment is housed in a rugged,lightweight, plastic case. It is easy to use, purpose designed and self contained with on-the-spot assessment. Sample conversion guide included. • Dimensions: 34 x 28 x 9 cm• Weight: 0.90 kg

WATER SAMPLING KITS5020

SPARE BOTTLE/ JARS5021

SPARE LAMINATE SHEETS5022

OIL SPILL KIT 15 LITRES5030

Suitable for small spills of oil and isespecially useful carried on forklift truckswhere it can be used in quick response toan emergency spill.

Comprises of:

• Pads• Socks• Disposal bags and ties• Instruction

All contained in a zip up, clear plastic bag.

Suitable for small spills of oil. The deluxeversion has the benefit of P.P.E. included.

Comprises of:

• Pads• Socks• Disposal bags and ties• Pair of indirect vent goggles• Disposable coverall• Pair of overshoes• Pair of gloves • Instruction Sheet

All contained in a refillable superiorquality PVC/ polyester zip up bag.

PROTRUDING LOAD SIGNS

Signs for marking overhanging and protruding loads from the sides, front and rear of vehicles. Non-reflective.

OIL SPILL KIT DELUXE 15 LITRES5031

TRIANGLES2137 NEAR SIDES2138

OFF SIDES2139

11 safety 18/8/09 17:19 Page 8

Cables

Patch Leads

Patch Panels

Modules

Faceplates

Line Adaptors


12. Consumables Cable Ties & Accessories

Cable Clips

Screws

Tapes

Connectors

Batteries

Road Markers

Resins & Compounds

Wipes

Protective Creams

12 Consumables 12/8/09 10:47 Page 1

148

12. Consumables

CABLE TIES

• Injection moulded in high grade nylon• Very high tensile strength• Easy to fasten by hand, or with one of the tensioning tools

CABLE TIE FIXING

Used with up to 9mm wide cable ties tosecure cable or pipe runs to brick,concrete or wood. Installed by knockinginto a 7mm to 8mm diameter holes. TheLOK01B is designed for soft brickworkand 6mm holes.

TAG MARKER

An identification tag used to identifycables and cable runs. It can befastened to cables using cable ties up to4.6mm wide. Tag Marker 1A is 63mmlong and accommodates up to 8 ColletMarkers. Tag Marker 2A is 100mm longand accommodates up to 14 ColletMarkers. Supplied in packs of 100, inblack or natural colour.

LOK01 44 X 12C6028

LOK01B 30 X 12C6029

LOK01S 34 X 12C6030

LOK05 49 X 12C6031

1A BLACKC6032

1A NATURALC6033

2A BLACKC6034

2A NATURALC6035

CABLE TIE BASE

Self adhesive cable tiemounting bases designedspecifically for holding heaviercable bundles offering verysecure fixing, allowing 4 wayentry for cable ties. Available inblack or natural colour.

C6020

C6021

C6022

C6023

STRAP CABLE FIXING1 (RS1)

C6017

Bobble cable tie, ideal for label holder.Size: 110mm x 2mm.

STRAP CABLE FIXING12A (REL180)

C6016

Black, releasable cable tie for use inoverhead cabling. Ideal for temporaryfastening.Size: 180mm x 7.5mm.

PRODUCT SIZE MM STRAP WIDTH (MAX)

MB2A 13 X 13 2.7MM

MB3A 19 X 19 4.1MM

MB4A 28 X 28 5.4MM

MB5A 38 X 38 10MM

CODE

CODE PRODUCT SIZE (MM)

TENSIONERS ( CABLE TIES)

10A (METAL) 4.6 - 13W1148

6A (METAL) 2.4 - 4.6W1146

7A (PLASTIC) 4.6 - 7.6W1147

5A (PLASTIC) 2.4 - 4.6W1145

Low cost plastic & metal cable tietensioning tools. Suitable for variouscable tie sizes.

DESCRIPTION CABLE TIECODE

10A

5A

CODE PRODUCT SIZE (MM) COLOUR PACK SIZEC6001 T18RN

(STRAP CABLE FIXING 1C) 100 X 2.5 NATURAL 100C6002 T18RB

(STRAP CABLE FIXING 1C) 100 X 2.5 BLACK 100C6003 T30RN 150 X 3.5 NATURAL 100C6004 T30RB 150 X 3.5 BLACK 100C6005 T50RN 200 X 4.6 NATURAL 100C6006 T50RB 200 X 4.6 BLACK 100C6007 LK2AN

(STRAP CABLE FIXING 1A) 270 X 4.8 NATURAL 100C6008 LK2AB

(STRAP CABLE FIXING 1A) 270 X 4.8 BLACK 100C6009 T50LN 385 X 4.8 NATURAL 100C6010 T50LB 385 X 4.8 BLACK 100C6011 T120RN 390 X 7.6 NATURAL 100C6012 T120RB 390 X 7.6 BLACK 100C6013 T120LN 760 X 7.6 NATURAL 100C6014 T120LB 760 X 7.6 BLACK 100C6015 LK5B

(STRAP CABLE FIXING 10A) 540 X 13 BLACK 50


149

12. Consumables

COLLET MARKERS

5mm wide PVC collets used for cable coding and identification, used with TagMarkers 1A and 2A and Straps Cable Fixing 1A. Supplied on reels of 1000 in eitherblack on white or black on yellow colour.

COLLET PAIRS

A type of flexible tube, bearing asequence of numbers from whichindividual collets can be cut.

C6051 COLLET ‘0’ C6090 COLLET ‘0’C6052 COLLET ‘1’ C6091 COLLET ‘1’ C6053 COLLET ‘2’ C6092 COLLET ‘2’ C6054 COLLET ‘3’ C6093 COLLET ‘3’ C6055 COLLET ‘4’ C6094 COLLET ‘4’ C6056 COLLET ‘5’ C6095 COLLET ‘5’ C6057 COLLET ‘6’ C6096 COLLET ‘6’ C6058 COLLET ‘7’ C6097 COLLET ‘7’ C6059 COLLET ‘8’ C6098 COLLET ‘8’ C6060 COLLET ‘9’ C6099 COLLET ‘9’ C6061 COLLET ‘A’ C6100 COLLET ‘A’ C6062 COLLET ‘B’ C6101 COLLET ‘B’ C6063 COLLET ‘C’ C6102 COLLET ‘C’ C6064 COLLET ‘D’ C6103 COLLET ‘D’ C6065 COLLET ‘E’ C6104 COLLET ‘E’ C6066 COLLET ‘F’ C6105 COLLET ‘F’ C6067 COLLET ‘G C6106 COLLET ‘G’ C6068 COLLET ‘H’ C6107 COLLET ‘H’ C6069 COLLET ‘I’ C6108 COLLET ‘I’ C6070 COLLET ‘J’ C6109 COLLET ‘J’ C6071 COLLET ‘K’ C6110 COLLET ‘K’ C6072 COLLET ‘L’ C6111 COLLET ‘L’ C6073 COLLET ‘M’ C6112 COLLET ‘M’ C6074 COLLET ‘N’ C6113 COLLET ‘N’ C6075 COLLET ‘O’ C6114 COLLET ‘O’ C6076 COLLET ‘P’ C6115 COLLET ‘P’ C6077 COLLET ‘Q’ C6116 COLLET ‘Q’ C6078 COLLET ‘R’ C6117 COLLET ‘R’ C6079 COLLET ‘S’ C6118 COLLET ‘S’ C6080 COLLET ‘T’ C6119 COLLET ‘T’ C6081 COLLET ‘U’ C6120 COLLET ‘U’ C6082 COLLET ‘V’ C6121 COLLET ‘V’ C6083 COLLET ‘W’ C6122 COLLET ‘W’ C6084 COLLET ‘X’ C6123 COLLET ‘X’ C6085 COLLET ‘Y’ C6124 COLLET ‘Y’ C6086 COLLET ‘Z’ C6125 COLLET ‘Z’ C6087 COLLET ‘-‘ C6126 COLLET ‘-‘C6088 COLLET ‘/’ C6127 COLLET ‘/’C6089 COLLET ‘.’ C6128 COLLET ‘.’

BLACK ON WHITE BLACK ON YELLOW

COLLET PAIR 1/50C6040











CABLE CLIPS

Plastic, saddle type cable clips with a single captive pin.

C6200 3.5MM WHITE 100C6201 3.5MM BLACK 100C6202 4.0MM WHITE 100C6203 4.0MM BLACK 100C6204 5.0MM WHITE 100C6205 5.0MM BLACK 100C6206 5.0MM+(CLIP 11B) BLACK 100C6207 6.0MM WHITE 100C6208 6.0MM BLACK 100C6209 7.0MM WHITE 100C6210 7.0MM BLACK 100C6211 8.0MM WHITE 100C6212 8.0MM BLACK 100C6213 9.0MM WHITE 100C6214 9.0MM BLACK 100C6215 10.0MM WHITE 100C6216 10.0MM BLACK 100C6217 11.0MM WHITE 100C6218 11.0MM BLACK 100C6219 12.0MM WHITE 100C6220 12.0MM BLACK 100C6221 14.0MM WHITE 50C6222 14.0MM BLACK 100C6223 16.0MM WHITE 50C6224 16.0MM BLACK 50C6225 22.0MM WHITE 50C6226 22.0MM BLACK 50

CODE SIZE COLOUR BOXQTY


150

TAPE SELFAMALGAMATING

12. Consumables

TAPE ALUMINIUM

Seals joints, lags and helps insulatepipes. Length: 45 metres.

Provides a temporary weather proofseal for external cable joints. Length: 10 metres

TAPE ADHESIVERUBBER

C6323

25mm tape used to construct air blocksand insulating gaps. Length: 5 metres

TAPE DENSYL

Denso tape is designed to withstand extreme temperature variations and to providelong term corrosion protection. Waterproof sealing tape. Length: 10 metres.

TAPE 11A

4mm tape used to tie cable-core paperwrapping.

TAPE CAUTION

Green, heavy duty, impact, acids, alkalis, rot etc. resistant plastic tape. Size: 150mm x 365 metres

50MMC6328 75MMC6329200 METRESC6330500 METRESC6331

YELLOW / BLACKC6334RED / WHITEC6335

TAPE 12AC6332

Used to secure polyethylene cablesin jointing chambers. Supplied in packs of 10. Length: 2.5 metres each

TAPE HAZARDWARNING

50mm self adhesive PVC striped tape. Length: 33 metres

50MMC632225MMC632119MMC6320

TAPE REINFORCINGC6325TAPE CABLINGADHESIVE

C6324

50mm tape used to secure cable gripsto cables. Length: 20 metres

50mm tape used to reinforce whenusing Sheets Rubber Self Adhesive. Length: 10 metres

TAPE PAPERINSULATING

C6326

50mm tape used for wrapping aroundcompleted cable joints. Length: 6.1 metres (60yd)

TAPE PVC

TAPE PVC 12MM BLACKC6300TAPE PVC 12MM BLUEC6301TAPE PVC 12MM GREENC6302TAPE PVC 12MM REDC6303TAPE PVC 12MM YELLOWC6304TAPE PVC 25MM BLACKC6305TAPE PVC 25MM BLUEC6306TAPE PVC 25MM BROWNC6307TAPE PVC 25MM REDC6309

TAPE PVC 25MM WHITEC6310TAPE PVC 25MM YELLOWC6311TAPE PVC 50MM BLACKC6312TAPE PVC 50MM BLUEC6313TAPE PVC 50MM BROWNC6314TAPE PVC 50MM GREENC6315TAPE PVC 50MM REDC6316TAPE PVC 50MM WHITEC6317TAPE PVC 50MM YELLOWC6318

General purpose PVC insulation tape,supplied in various colours and sizes. Length: 20 metres

TELEPHONE CABLE BELOWC6338

FIBRE OPTIC CABLE BELOWC6339

FIBRE OPTIC CABLE BELOWWITH INTEGRATED TRACER WIRE

C6337

50MMC6340

70MMC6341

100MMC6342


151

12. Consumables

SOLDER 7C6278

Resin cored 1.25mm diameterelectrical/ general purpose solder.Size: 500gms reel.

CONNECTOR WIRE INSULATED 8B & 8C

Similar to Connector Wire Insulated8A/1 but allows three wire insulationdisplacement.

As Connector Wire Insulated 8B but isa three way type with a side entry.

CONNECTOR WIREINSULATED 11A

C6154

An insulation displacement connectorwhich can be used as a replacementfor either Connector Wire Insulated8A/1, 8B or Connector Dropwire 2A.

A comprehensive range of CS Pozidrive screws, packed in boxes of 200

SCREWS

C6240 SCREW 6 X 1/2

C6241 SCREW 6 X 3/4

C6242 SCREW 6 X 1

C6243 SCREW 6 X 1 1/2

C6244 SCREW 6 X 2

C6245 SCREW 6 X 2 1/2

C6246 SCREW 8 X 1/2

C6247 SCREW 8 X 3/4

C6248 SCREW 8 X 1

C6249 SCREW 8 X 1 1/2

C6250 SCREW 8 X 2

C6251 SCREW 8 X 2 1/2

C6252 SCREW 10 X 3/4

C6253 SCREW 10 X 1

C6254 SCREW 10 X 1 1/2

C6255 SCREW 10 X 2

C6256 SCREW 10 X 2 1/2

C6257 SCREW 10 X 3

C6258 SCREW 12 X 3/4

C6259 SCREW 12 X 1

C6260 SCREW 12 X 1 1/2

C6261 SCREW 12 X 2

C6262 SCREW 12 X 2 1/2

C6263 SCREW 12 X 3

RAWL PLUGS

Supplied in boxes of 100.

C6265 BROWN 7.0MM

C6266 RED 5.5MM

C6267 YELLOW 5.0MM

8BC6152

8CC6153

TWINE LACING - MEDIUMC6346

Supplied on 250g spools.

Used on cableforms in large telephoneexchanges.Breaking load is 800 Newtons.

CONNECTOR DROPWIRE

3BC6159

3AC6158

2AC6156A grease filled two wire straightthrough insulation displacementconnector designed for wire gaugesizes 0.5-0.9mm and Dropwire.

A half tap version of the ConnectorDropwire 2A. Designed for wire gaugesizes 0.5-0.9mm and Dropwire.

A 2 wire straight through insulationdisplacement connector. Designed toaccommodate copper wire gauge sizes0.8-1.14mm and Dropwire.

A half tap version of ConnectorDropwire 3A.

STAPLES

36/ 12mmC6274

36/ 14mmC6275

36/ 10mmC6273

28/ 10mmC6271

28/ 10mm WHITEC6272

28/ 8mmC6270

A range of galvanised staples for usewith Staple Guns 28 and 36. Supplied in boxes of 5000.

2BC6157

BOX 500C6150

PACK 50C6151

CONNECTOR WIREINSULATED 8A/1

A two wire insulation displacementconnector. Used for jointing insulatedcopper conductors of 0.4 - 0.9mmdiameter.


152

12. Consumables

PAINT MARKING

Provides high opacity spot marks and lines in bright mattfinish. Temporary paint fades naturally over 6 week periodor can be removed with water immediately. Touch dry in 5minutes. Size: 750ml aerosol.

PAINT MARKING APPLICATOR

Trigger controlled marking. Available in either two wheel or fourwheel version.

YELLOWC6401

WHITEC6402

GREYC6400

YELLOWC6404

WHITEC6405

GREYC6403

PAPER TOWELSC6423

2 ply blue papertowels, 100sheets per roll.Supplied in boxesof 24 rolls.

SHIFT CLEANERC6427

Effectively removesdirt, grease and oilfrom hard surfaces.Suitable for walls,floors, tiles,concrete andglazed surfaces.Size: 750ml.

CRAYON MARKERC6409

Cold surface marker for use on anymaterial, even wet or oily surfaces.Suitable for temperatures between -45°and +65C°. Colour: Yellow.

PAPER TOWELSFOLDED

C6424

Blue C-fold hand towels with goodabsorbency. Approx 184 towels perpack, 16 packs per box.

BARRIER CREAMROZALEX

C6420

Protects skin against oils, grease, dust,general grime and dry irritants. Size: 450ml tub.

TUFANEGAC6421

A heavy duty hand cleaner withpolygrains. Tough but gentle, solventfree with added conditioner. Size: 500 ml tub.

WET WIPESC6422

Effective on grime, oil and grease,leaving hands clean and moisturised.150 wipes per container.

TEMPORARY

PERMANENT

TOILET ROLLS DELUXC6425

Supplied in box of 40.

BATTERIES BATTERY 996/R25 6VC6286

6 volt battery, high power, rugged andweatherproof, suitable for use in roadlamps, lanterns, torches etc.

MN1500 (LR6-C) ‘AA’C6280

MN1400 (LR14-C)C6281

MN1300 (LR20-D)C6282

MN1604 (PP3) 9VC6283

MN2400 (LR3) ‘AAA’C6284

MN1203 4.5VC6285

BLACKC6410

GOLDC6411

TWO WHEELC6406

FOUR WHEELC6407

PEN MARKER

Fine, fast drying permanent ink, for useon almost all surfaces.


153

12. Consumables

COLD JOINT SEALERC6415

Used for jointing of roadasphalt on vertical edges.Size: 600ml aerosol.

SILICON SEALANTC6414

One component, water andmould resistant, ultra flexiblemulti-purpose clear siliconsealant which can be usedon many common buildingsurfaces. Size: 300 ml.

IPAF4235

Isopropyl Alcohol Fluid formulatedwithout CFC’s.

SOLUTION LEAKDETECTING 3

C6417

For use whenpressure testingcables. Size: 500ml.

SPRAY DEWATERINGE2126

Used to displacemoisture fromexternal blockterminals.

RESIN PACK 2E3346

Used to make gas seals inpolyethylene sheathed cables witheither polyethylene or paper insulatedconductors.

RESIN PACK 6BE3347

Resin for sealing the base of CabinetsCross Connection 1 and 3.

RESIN PACK 7BE3352

Used for sealing ducts not fitted with acaulking gland, against the ingress ofgas and water.

RESIN PACK 9BE3348

Used for sealing cables in the base ofsleeves 30A, 31A and 32B.

RESIN PACK 10AE3349

Used for sealing sleeves 30A, 31A and32B. Very hard/ permanent sealant.

Non-foaming 2 part for sealing verticalducts.

RESIN PACK 14BE3350

A pliable compound for use whensealing Ducts. Supplied in 1kg sticks.

COMPOUND 16AE3160

A PVC solvent for jointing Duct 54D inexchange and building lead-ins.

COMPOUND 21AE3161

Black Compound for sealing aroundjunction boxes, service cable entriesand many other similar applications.Easy to use, forms around irregularsurfaces and configurations, highlyresistant to cracking, drying andshrinking. Supplied in 5 x 1b blocks.

COMPOUND DX5E3162

KILFROSTC6418

Pneumatic tool anti-freeze lubricant.Size: 5 litres.

LUBRICANT CABLE 2A

E3304

This lubricant reduces the frictionbetween the Cable and duct walls.Supplied in 20 litre containers.


Index

AAdaptor BT, RJ45, RJ11 12,13Adaptor Contractor 2C 96Adaptor Plates for Block Panels 49Adaptor Road Cone 140Adaptors Rod 84Adaptors Test 61Adhesive 3ml 85ADSL Line Jack Unit 11ADSL Microfilter 11Air Compressor 86Allen Keys 102Amplifier 109J 52Amplifier AM4 53Anchor Stays 76Angle Grinder 135Attachments Rod 84Auger Screw 101

BBack Boxes 11Bag Grip 86Bar Digging 77,121Barrier Boards 140,141Barrier Cream 152Barrier Systems 141Basket Tool 107Batteries 152Baying Kit 26Bell 50E 13Bell 80D 13Bellmouth 1A 89Bellmouth Split 89Belt Pocket 107Belt Safety 11 144Blanket Cable Protection 94Blanking Plates 20Blanking Plugs ST,SC 36Blanks for 3 in 1 Module 18Bleep Tester 58Block Clip 141Block Inserts 78Block Snatch 87Block Terminals 78Blocks Terminal 9BNC Adaptors 47BNC Patch Panels 49BNC Plugs 47BNC Sockets 48Bolt Cutters 104Bolt Expansion 90Bolt Foundation Intended 90Bolts & Nuts for Keys 91Boots 143,144Bottle Polyethylene 122Bowls 122Bowsaw 103Box Connections 8Brace Coach Screw 77Bracket 22, 32 80Bracket Cable Bearer 90Bracket Universal (for sleeves) 98Bradawl 101Broom 121Brush Cylindrical 86Brush Gutter 121Brush Sash Tool 121Brush Wire Scratch 121Buckets 122Buckle Strapping Steel 86

CC.A.T. & Genny 60Cabients Wall Mounted Flat Pack 22Cabinet Brush Cover Top Entry 26Cabinet Brush Strip Panel 26Cabinet Letterbox Brush Strip 26Cabinet Plinth 24Cabinets Free Standing 23,24Cabinets Wall Mounted 22Cable Bearer Wall Type 90Cable Caster Tool 108Cable Clips 149Cable Coaxial 2002 44Cable Coaxial 2003 44Cable Coaxial 3002 44Cable Coaxial CT100 45Cable Coaxial RA7000 45Cable Coaxial RG179 45Cable Coaxial RG58, RG59 45Cable Coaxial TZC 44

Cable CW1128 External 6Cable CW1128/1198 External Armoured 7Cable CW1128/1252 External Aerial 7Cable CW1308 Internal 6Cable CW1308B Internal/ External 6Cable Dispenser Roller 7Cable Dropwire 78Cable Drum Jack Splindle 127Cable Drum Jacks 127Cable Drum Trailer 127Cable Fibre Loose Tube 30Cable Fibre Loose Tube CST Armoured 31Cable Fibre Loose Tube SWA Armoured 31Cable Fibre Tight Buffered 31Cable Height Meter Digital 81Cable Laying Shovel 120Cable Tidy 26Cable Tidy Loops 26Cable Tie Bases 148Cable Ties 148Cable Tracing Kit AM4/TG4 53Cable Tray Brackets 26Cable Trays 26Cables CAT 5E 16Cables CAT 6 16Cage Nut Kit 26Calibration kit for Impact 4 145Cam & Guide Sets 114Capping 81Caps Sealing 95Carpet Packers 21Carrying Bag for Ladder Telescopic 74Carrying Case for AM4/TG4 53Carrying Case for Tester 132J 52Castors Heavy Duty 24Catenary Wire 79Chains 75,76Check Plugs 59Chinstrap 142Chisels 103Cinbins 38Clamp 10A 96Clamp 1A 94Clamp 7A 95Clamp Guide 2A 89Clamp Meters 59Clamps Aerial Cable 80Clamps Dropwire 80Clay Grafter 120Clip Binding 94Clip Test 38A 62Coax Block Panels 49Cobras 85Cold Cure Termination System 38Cold Joint Sealer 153Collet Markers 149Collet Pairs 149Compounds 93,153Compression Tools 117,118Conductor Cleaner 117Cones Airblock 95Connector Bend 81Connector Dropwire 79Connector Module 1B 78Connector Swivel 87Connector Wire Insulated (Jelly Crimps) 7Connector/ Valve Air Heatshrinkable 95Connectors Compression 96Connectors Wire Insulated 7,151Continuity Tester 58Cord Sets 61,62Cordless Combi Drills 130Cordless Drill Drivers 130Cordless Hammerdrills 131,132Cordless Screwdrivers 130Cords Extension 13Coring/Stripping Tools 116,117Coupler BT Plug 12Coupler RJ45 12Coupling Up Pieces 84Couplings Rod Duct 3 85Cover Joint Box 90Crayon Marker 152Crimp Tools 107Crimp Tools Fibre 112Crimping Tool Hex 114Crimping Tool RG6/RG59/RG11 114Crowbar 121Curing Oven 39Cutter Disc PE Sheath 96Cutter Longitudinal 1A 105Cutter Subduct 87,104

Cutter Tube 104Cutters 104Cyclops Stripper 105

DDDF 6 Block Panels 49DDF Blocks 49Desiccant Packs 93Desiccator 2A 94Desoldering Pump 108Die Set for Pliers Crimping 6A 114Digalert 350 52Digalert Probe 1B 53Disc Caulking 86Dispenser 1A 7,127Dispenser A Frame 127Dispenser 'A' Frame 88,7,127Dispenser Dropwire 1 127Dispenser Dropwire 2B 127Dispenser Sash Line 75,127Dispensers Dropwire 79Domed Sleeves 98Drawrope 88Drill Bit Set 135Drill Bits Masonry 136Drill Bits Wood Auger 137Drop Cable Preparation Kit DK1 115Dropwire Cable 78Dropwire Dispensers 79Duct Inflation Tool 98Duct Motor 2B 86Duct Repair Kit 86Ducting 86Dustbin 122

EEar Defenders 142Earth Bonding Kit 26Earth Loop Impendance Indicator 59End Connectors for Rods Cont. 85Epotek Heat Curing Epoxy 38Eski Wipes 152Extension Cables 126Extension Leads 126External Protection Module 2B 78Extraction Tool 118Extraction/ Insertion Tool 118Extractor 58 106Eyebolts Expanding 80Eyeshields 142Eyewash 145

FFace Mask 142Faceplates 19,20Fault Caster 56Festoon Lighting 125Fibre Adaptors 34,35Fibre Cleaver 112Fibre Cleaver CT30 40Fibre Connectors 34Fibre Contiuity Tester 63Fibre Crimp Tools 112Fibre Cutter Kevlar 112Fibre Microscope 39Fibre Optic Kit 113Fibre Optic Talk Set 67Fibre Optic Test Kits 65Fibre Patch Box Tamperproof 36Fibre Patch Boxes 37Fibre Patch Cords 32,33Fibre Patch Panels 36Fibre Pigtails 31Fibre Preparation Kit 113Fibre Strippers 111Fibre Test Sets 525 64Fibre Tool Case 113Fibre Wall Mounted Enclosures 37Fibre Work Mat 112Files 103Fire Extinguisher 145First Aid Kit 145Fish Tape 102Floodlights 125Floorboxes 21Fluorescent Light 125Frames & Covers Carriageway 91Frames Distribution 9Full Arrest Lanyard 144Funnel 124Fuse Finder Kit 59Fusion Splicers 40,41

GGas Cylinders 98Gas Detector 145Gateguard Clip 141Gateguard Sign 141Gateguards 141Gauge Pressure 94Generator 124Gimlet Bellhanger 101Gland Caulking 86Gloves 142Grating Sump 90Grinder 135Grip Coupling 1A 85Grip Insulator Pole 80Grips Cable 88Grips Pulling Aerial Cable 79Grips Stay 80Grips Threaded 87Grips Wire Suspension 80Guide Rod Flexible 89Guide Tips for Cobras 85Guides Cabling 89

HHacksaw Blades 103Hacksaws 103Hammer Holder 107Hammer Slide 76Hammerdrills 132,133,134Hammers 102Hanging Identification Flag Kit for DDF Blocks 49Hard Wire Sockets 110V, 240V 126Harrier ISDN 55Head Torch 142Headset 17A 52,61Headset 18A 52,61Headset 7A 52Headset Adaptor AM4 62Helmets 142Hook Aerial Cable 79Hook for Lifting Keys 91Hook Plates 80Hook Temporary Hold 75Horse Pole 76Hoses 124Hot Melt Accessories 35Hot Melt Connectors 35

IImpact Hammerdrills 132Inline Adaptors 36Inserters Wire 106Insertion & Flaring Tool 118Insulation Testers 58Insulator Stay 2 79IPA 39,153IPA Dispenser 39Iron Anchor 4 90Iron Conical 2A 96

JJack 608A 13Jack Bulkhead Straight 1.6/5.6 47Jack Pole 76Jack Pole Chain 76Jacket High Visibility 143Jacking Feet 24Jacks Test 14Jerkins High Visibility 143Jewellers Snips 104Jigsaw 134Joint Box 90Jointing Kits 3M 93Jumper Wire 7

KKerb Ramp 123Kettle Aluminium 122Key Spindle 96Keys Lifting 91,92Keystone CAT 5E 19Keystone Jack Patch Panel 19Keystone Modules 19Kilfrost 153Kit 267A 94Kit Joint Closures 97Knee Pads 142Kneeboots 144Knife Sharpener 103

Product PAGE Product PAGE Product PAGE Product PAGE

Index

Product PAGE Product PAGE Product PAGE Product PAGEKnifes 103Knippex 100

LLabels for DDF Blocks 49Ladder Accessories 74Ladders 72,73,74Lamp Conelite 141Lamp Mono 141Lamp Safety 1A 145Lamp Vehicle Rotating 125Lancasters 56Lapping Films 38Laser Warning Label 39LED Sources 65,67Letters Pole Plastic 77Lever Pole Twister 76Lifter Manhole Cover 4A 92Lifter Pole 16' 76Lifting Keys 91Lightcrimp Connectors 35Lightcrimp Plus Connectors 35Line Adaptors 12Line Jack Units 11Line Sash 75Link Cabling 87Link Keystone 87Loop Tester 58Lubricant Cable 2A 94

MMallets 102,103Mandrel Nylon 86Manometer 1C 54Mastic Gun 108MegaMouse 33 kHz 60Megamouse Adaptors 60Metal Detectors 59Mirror Plumber 102Modules CAT 5E RJ45 18Modules CAT 6 RJ45 18,19Mounting Block 49Mounting Blocks Terminal 78Mounting Plates 21Multi Gas Cylinder 145Multi-Cones 141Multi-head Key 91Multimeters 57

NNail Bonding 81Nail Pouch 107Needles 38Network Terminating Equipment 5A 11Newcastle Drainer 120Nippers 100No Loss Chuck 96Numbers Pole Plastic 77Nut Seal Captive 96

OOil Spill Kits 146Optical Fibre Identifiers 63Optical Length Tester 69Optical Light Source 67,68Optical Power Meters 66,67,68Oscillator 87J 52OTDR's 70Outriggers 106

PPaint Applicator 152Paint Marking 152Panel Sockets 110V, 240V 126Paper Towels 152Patch Leads Crossover 17Patch Leads UTP CAT 5E RJ45 17Patch Leads UTP CAT 6 RJ45 17Patch Panels CAT 5E 20Patch Panels CAT 6 20Pen Markers 152Pick 121Pincers 100Pins Locking Cable Bearer 90Pit Lifters 91,92Plate Bearing 76Pliers 100Pliers Crimping 100,107Pliers Crimping 19A 114Pliers Crimping 6A Coax 114Pliers Rod Sweep 100Pliers Strapping 100

Pliers Water Pump 100Plug 235A 108Plug 431A,430A, 631A, 630A 13Plug Creasoted 81Plug RJ11 13Plug RJ22 13Plug RJ45 13Plugs 110V, 240V 126Plugs Coaxial 1.0/2.3 46Plugs Coaxial 1.6/5.6 47Plugs Coaxial 43 Type 46Plugs Coaxial 54 Type 47Pole Carrying Truck 76Pole Installation Tools 77,121Polishing Kit 38Polishing Pucks 38Positioning Belt 144Power Distribution Units 27Powerbox 135Pre-Terminated Multicore Cable 33Probe Pole Test 75Propane Equipment 92Protector Mounting 5B 10Protectors 18C, 21A, LCU1PA 10Protectors Module 1A, 2A, 6C 13Protruding Loads Signs 146Pruning Saw 104Pulley Dropwire 79Pump Accessories 124Pump Hand 124Pump Lubricant 2A 94Pump Portable 124Pump Submersible 124Punner Half Moon 77,121Punner Iron 77,121

QQuick Connect Chuck 96Quintest 56

RRawl Plugs 151RDC Tester 58Rear Cable Management Tray CAT6 20Reel Hose 86Regulator Auto Air 94Residual Current Detector 126Resin Gun 93Resin Packs 93,153Rigging Head & Weight 79Ring Jumper 37B 9Rings Polehead 77Rivetter 1A 94RJ11 Sockets 12Road Cone Adaptor 140Road Cones 140,141Road Signs 140Rod Repair Kit 85Rods Clearance 81Rods Continuous 85Rods Duct 84Roller Rope Guiding Surface 89Roof Fans 25Ropes Cabling 88Rotary Hammerdrills 133,134Rozalex 152

SSafety Harness 144Safety Voltage Indicator 57Sandbags Hessian 123SC Duplex Clip 34Scissors Cranked 104Scissors Kevlar 112Screw Coach 77Screwdriver 12 78Screwdriver Set 101Screwdrivers Cabinet 101Screwdrivers Instrument 101Screws 151Scribe Cleavers 112SDS Chisels 137Shackles 87Shave Hook 96Shears 104Sheet Canvas 123Sheet Rubber Self Adhesive 94Sheet Waterproof 123Shelf Keyboard Turntable 26Shelfs Cabinet Cantilever 26Shelfs Cabinet Fixed 25Shelfs Cabinet Sliding 25

Shift Cleaner 152Shoes 143,144Shovel Holer 77,121Shovel Stoking No. 2 Square 120Shovel Tapermouth No.2 120Shovel Trenching 120Signal Clamp 60Signs 140,146Silicon Sealant 153Sleeve Dropwire Protection 79Sleeves (Domes) 98Sleeving 12/15/22mm ID 94Slick Line 88Sling Lifting 75Sling Wire Rope 75Smart Strip 105SMB Plugs 47Snap & Seal Tools 114Sockets 110V, 240V 126Sockets Coaxial 43 Type 48Soil Sheet 123Solder 7 151Soldering Irons 108Solution Leak Detecting 153Spade Digging 120Spade Rabbitting 77,121Spanner Cranked 80Spanners 101Speed Ramp 141Spigots 49Splice Bridge 37Splice Protection Sleeves 38Splicing FID 88Splitter Box 126Splitters 3 way 126Spoil Sheet 123Spoon Excavating 77,121Spray Dewatering 78,153Stand Drawrope 88,127Staple Guns 108Staples 108,151Staples Galvanised 81Step Manhole 90Stepladders 72,73Steps Pole 77Stool Folding 123Strap Temporary Hold 75Strapping Steel 86Straps Cable Fixing 148Straps Tensioning 75Strip Binding 94Strip Connection Highband Krone 18Stripper C.A.T.V. 115Stripper Cable Sheath 105Stripper Data Cable 105Stripper Dropwire 105Stripper Wire 105Strippers Coaxial 114,115Strippers Fibre 111Strips Aluminium 81Strips Connection 10Strips Designation 10Stud Expanding 90Sub Duct Pulling Sling 87Subduct Cutter 87Subracks 9Suction Pad 124Surge Arrestor 21A 10Switch 2A 13Syringe 3cc 38

TTag Markers 148Tap Tools 118Tape Draw 102Tape Measure 102Tape Steel 102Tapes 150TDR's 54,55TDUX Kits 98Techlube 94Telescopic Ladder 74Tensioner 2B 79Tensioner 3A 75Tensioner Wire (Turnbuckle) 79Tensioner Wire Stay 79Tensioners (for Cable Ties) 108,148Tent 12A 123Test Adaptors 61Test Telephones 52Tester 132J 52Tester 430A 49

Tester SA9083 53Through Coupler Panel CAT 5E 20Throwmaster 102AM 54Toilet Rolls 152Tone Generator TG4 53Tone Probe 510J 53Tone Tracing Kit 500J/600J 53Tool Bag Canvas 107Toolbox 107Torches 125Torchue Wrenches 118Trailing Socket and Cable 126Transformer 3.3 KVA 124Trap Tools 118Tripod 140Trousers High Visibility 143Trunking 14Trunking Accessories 14Tubing Aluminium 96Tubing Plastic Flexible 95Tubing Polyethylene 96Tufanega 152Turnbuckle 79Tweezers 112Twin Switched Socket 21Twine Lacing 151Twister Pole 76Two Way Radios 122

UU Links 49Ultraslim Modules 18

VValve Air 95Valve Air Adaptor 95,96Valve Air Repair Tool 96Ventilator 124Ventilator Hose 124Visual Fault Locator 64,68Voice Modules 18Voice Patch Panels 20Voltage Detector 57

WWaistcoats High Visibility 143Walkie Talkies 122Wall Mount Frame 2U 23Washers Galvanised 81Water Container 122Water Sampling Kit 146WaveTester Multimode Kits 69Wedges Locking 10Wet Suit 143Wet Wipes 152Wheel Measuring 123Wheelbarrow 123Winch KN1000 127Wipes & Pads Cleaning (Fibre) 39Wire Cut & Strip Tools 110Wire Lashing 78Wire Rope Grips 80Wire Thimbles 80Wire Unwrapping Tools 110Worklight 125Wrap/ Unwrap Bits & Sleeve 109Wrap/ Unwrap Tools 109,110Wrapper Holder Head 109Wrapper Wire Tools 109Wrapping Bits & Sleeves 109Wrapping Head 109Wrecking Bar 121Wrench BNC 118Wrench F-Connectors 118Wrench Hexagon 101Wrench Vice Grip 101

Index by Code

CC6001 148C6002 148C6003 148C6004 148C6005 148C6006 148C6007 148C6008 148C6009 148C6010 148C6011 148C6012 148C6013 148C6014 148C6015 148C6016 148C6017 148C6020 148C6021 148C6022 148C6023 148C6028 148C6029 148C6030 148C6031 148C6032 148C6033 148C6034 148C6035 148C6040 149C6041 149C6042 149C6043 149C6044 149C6045 149C6046 149C6047 149C6048 149C6049 149C6050 149C6051 149C6052 149C6053 149C6054 149C6055 149C6056 149C6057 149C6058 149C6059 149C6060 149C6061 149C6062 149C6063 149C6064 149C6065 149C6066 149C6067 149C6068 149C6069 149C6070 149C6071 149C6072 149C6073 149C6074 149C6075 149C6076 149C6077 149C6078 149C6079 149C6080 149C6081 149C6082 149C6083 149C6084 149C6085 149C6086 149C6087 149C6088 149C6089 149C6090 149C6091 149C6092 149C6093 149C6094 149C6095 149C6096 149C6097 149C6098 149C6099 149C6100 149

C6101 149C6102 149C6103 149C6104 149C6105 149C6106 149C6107 149C6108 149C6109 149C6110 149C6111 149C6112 149C6113 149C6114 149C6115 149C6116 149C6117 149C6118 149C6119 149C6120 149C6121 149C6122 149C6123 149C6124 149C6125 149C6126 149C6127 149C6128 149C6150 7,151C6151 7,151C6152 7,151C6153 7,151C6154 7,151C6156 79,151C6157 81,151C6158 81,151C6159 81,151C6200 149C6201 149C6202 149C6203 149C6204 149C6205 149C6206 149C6207 149C6208 149C6209 149C6210 149C6211 149C6212 149C6213 149C6214 149C6215 149C6216 149C6217 149C6218 149C6219 149C6220 149C6221 149C6222 149C6223 149C6224 149C6225 149C6226 149C6240 151C6241 151C6242 151C6243 151C6244 151C6245 151C6246 151C6247 151C6248 151C6249 151C6250 151C6251 151C6252 151C6253 151C6254 151C6255 151C6256 151C6257 151C6258 151C6259 151C6260 151C6261 151C6262 151C6263 151C6265 151C6266 151C6267 151

C6270 151,108C6271 151,108C6272 151,108C6273 151,108C6274 151,108C6275 151,108C6278 151C6280 152C6281 152C6282 152C6283 152C6284 152C6285 152C6286 152C6300 150C6301 150C6302 150C6303 150C6304 150C6305 150C6306 150C6307 150C6309 150C6310 150C6311 150C6312 150C6313 150C6314 150C6315 150C6316 150C6317 150C6318 150C6320 150C6321 150C6322 150C6323 150C6324 150C6325 150C6326 150C6328 150C6329 150C6330 150C6331 150C6332 150C6334 150C6335 150C6337 150C6338 150C6339 150C6340 150C6341 150C6342 150C6346 151C6400 152C6401 152C6402 152C6403 152C6404 152C6405 152C6406 152C6407 152C6409 152C6410 152C6411 152C6414 153C6415 153C6416 153C6417 153C6418 153C6420 152C6421 152C6422 152C6423 152C6424 152C6425 152C6427 152

DD2000 22D2001 22D2002 22D2003 22D2004 22D2005 22D2006 22D2007 22D2008 22D2009 22D2010 22D2011 22D2015 22

D2016 22D2017 22D2018 22D2019 22D2020 22D2021 22D2022 22D2023 22D2024 22D2025 22D2026 22D2027 22D2028 22D2029 22D2030 22D2031 22D2032 22D2035 23D2036 23D2037 23D2038 23D2039 23D2040 22D2041 22D2042 22D2043 22D2044 22D2045 22D2100 23D2101 23D2102 23D2103 23D2104 23D2105 23D2106 23D2107 23D2108 23D2109 23D2110 23D2111 23D2112 23D2113 23D2114 23D2115 23D2116 23D2120 24D2121 24D2122 24D2123 24D2124 24D2125 24D2126 24D2127 24D2128 24D2129 24D2130 24D2131 24D2132 23D2133 23D2134 23D2135 23D2136 23D2137 23D2138 23D2139 23D2140 23D2141 23D2142 23D2143 23D2144 23D2145 23D2146 24D2147 24D2148 24D2149 24D2150 24D2151 24D2152 24D2153 24D2154 24D2155 24D2156 24D2157 24D2200 24D2201 24D2202 24D2203 24D2204 24D2205 24D2206 24D2207 24




D5201 21D5203 21D5204 21D5205 21D5209 21D5210 21D5211 21D5212 21D5213 21D5214 21D5216 21

E2E1119 91E2001 77E2002 77E2003 77E2004 77E2005 81E2006 81E2007 81E2008 81E2009 81E2010 78E2011 78E2012 75E2013 81E2014 77E2015 77E2016 77E2017 76E2018 76E2019 76E2021 75E2022 75E2023 75E2024 75E2025 75E2026 76E2027 75E2028 75E2029 75E2030 75E2031 79E2032 79E2033 79E2034 79E2036 74E2037 80E2038 80E2039 80E2040 80E2041 80E2042 80E2043 80E2044 74E2045 81E2046 81E2047 78E2048 78E2050 77E2052 81E2054 76E2055 81E2056 75E2057 75E2058 76E2060 79E2061 79E2062 80E2063 80E2064 80E2065 80E2066 77E2067 77E2074 75E2075 75E2076 80E2079 79E2080 76E2081 78E2082 78E2083 78E2084 80E2085 80E2086 79E2088 80E2089 80E2090 80E2091 79,127E2092 79,127

E2093 75,127E2095 80E2096 80E2098 72E2099 72E2100 78E2101 78E2102 76E2103 77E2104 77E2105 81E2106 81E2108 76E2109 75E2110 77E2111-3 76E2111-6 76E2112 81E2113 81E2114 81E2115 81E2117 76E2118 76E2120 79E2121 78E2122 78E2124 81E2125 78E2126 78,153E2130 79E2132 74E2133 79E2134 79E2135 77E2136 77E2139 80E2142 76E2143 81E2145 78E2146 77E2147 77E2148 79E2150 77E2151 77E2152 77E2153 77E2154 77E2155 77E2156 77E2157 77E2158 77E2159 77E2160 77E2161 77E2162 77E2163 77E2164 77E2165 77E2166 77E2167 77E2168 77E2169 77E2180 72E2181 72E2182 72E2183 72E2184 72E2185 72E2186 72E2187 72E2188 72E2189 72E2190 72E2191 73E2192 73E2193 73E2194 73E2195 73E2196 73E2197 73E2198 73E2199 73E2200 73E2201 72E2202 72E2203 72E2204 72E2205 72E2206 72E2207 72E2208 72

Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page Code Page

Index by Code


E2209 72E2210 72E2211 72E2212 72E2213 72E2214 72E2215 73E2216 73E2217 73E2218 73E2219 73E2220 73E2221 73E2222 73E2223 73E2224 73E2225 73E2226 73E2227 73E2228 73E2230 74E2231 74E2232 74E2233 74E2234 74E2235 74E2236 74E2237 73E2238 73E2239 73E2240 73E2241 74E2242 74E2243 74E2244 74E2245 74E2246 74E2247 74E2248 74E2249 74E2250 74E2252 81E2254 78E2255 78E2256 78E2257 78E2258 78E2259 78E2260 78

E3E3001 96E3002 84E3003 84E3004 84E3005 84E3006 84E3007 95E3008 96E3009 86E3010 84E3011 84E3012 84E3013 84E3014 85E3016 86E3017 86E3018 86E3019 89E3020 89E3021 89E3022 94E3023 90E3024 90E3025 90E3026 90E3027 90E3028 90E3029 90E3030 90E3031 90E3032 90E3033 86E3034 86E3035 86E3036 86E3037 86E3038 86E3040 86E3041 90E3042 90

E3043 90E3044 90E3045 90E3046 90E3047 90E3048 95E3049 95E3050 95E3051 95E3052 95E3053 95E3054 95E3055 95E3056 95E3057 95E3061 96E3062 96E3063 96E3065 94E3066 95E3067 95E3068 95E3069 95E3070 95E3071 95E3072 89E3075 90E3078 96E3119 89E3160 93,153E3161 93,153E3162 93,153E3163 95E3164 95E3165 95E3166 95E3167 95E3168 95E3174 94E3175 96E3176 96E3177 96E3178 96E3179 96E3180 96E3181 96E3187 87E3188 87E3189 87E3190 85E3191 85E3192 85E3193 85E3194 84E3195 84E3196 84E3197 84E3198 84E3199 84E3200 87,104E3201 93E3202 93E3203 93E3204 86E3205 86E3206 7,88,127E3208 94E3209 87,104E3210 86E3211 86E3212 88E3213 86E3214 86E3215 90E3216 88E3217 88E3218 88E3219 88E3220 88E3221 88E3222 88E3223 88E3224 88E3225 88E3226 88E3227 88E3228 88E3229 88E3230 88E3231 88E3232 88

E3233 88E3234 88E3235 88E3237 87E3238 87E3242 89E3243 89E3244 89E3245 89E3246 89E3247 89E3248 89E3249 89E3250 89E3251 89E3254 89E3255 89E3256 89E3260 90E3261 96E3262 90E3263 90E3264 91E3265 91E3266 91E3267 91E3268 91E3269 91E3270 91E3271 91E3272 96E3273 94E3273-1 94E3274 97E3275 97E3276 97E3277 97E3278 97E3279 97E3280 97E3281 97E3282 97E3283 97E3284 97E3285 97E3286 97E3287 97E3288 97E3289 97E3290 97E3291 92E3292 92E3293 92E3294 92E3295 92E3296 92E3298 91E3301 87E3302 87E3303 87E3304 94,153E3305 86E3306 86E3307 86E3308 86E3310 86E3311 86E3312 86E3313 86E3314 86E3322 90E3323 96E3324 96E3325 92E3326 92E3327 92E3328 92E3329 92E3330 92E3331 92E3332 92E3333 92E3334 92E3335 92E3336 92E3337 92E3340 94E3342 86E3343 94E3344 92E3345 94

E3346 93E3347 93,153E3348 93,153E3349 93,153E3350 93,153E3351 93E3352 93,153E3355 85E3356 85E3357 85E3358 85E3359 85E3360 85E3361 85E3362 85E3363 85E3364 85E3365 85E3366 85E3367 85E3368 85E3369 85E3370 85E3371 85E3372 85E3373 85E3374 85E3375 85E3376 85E3377 85E3378 85E3379 84E3380 84E3381 84E3382 84E3384 85E3385 85E3386 85E3387 85E3388 85E3389 85E3390 85E3391 85E3392 85E3393 88E3394 88E3395 88E3396 88E3397 87E3398 87E3399 87E3400 87E3401 94E3402 94E3403 94E3405 85E3406 85E3407 96E3408 90E3409 90E3411 86E3412 86E3413 94E3414 94E3416 87E3417 87E3418 94E3419 94E3422 96E3423 96E3425 95E3426 95E3427 95E3428 95E3429 95E3430 95E3431 96E3432 95E3433 95E3434 95E3435 95E3436 95E3437 95E3444 94E3453 93E3454 93E3455 87E3456 87E3457 87E3458 87E3459 87

E3460 87E3466 88E3467 88E3468 88E3469 88E3476 91E3477 91E3480 98E3481 98E3482 98E3483 98E3484 98E3485 98E3486 98E3487 98E3489 88E3490 88E3491 88,127E3500 98E3501 98E3502 98E3503 98E3504 98E3505 98E3506 98E3510 85E3511 85E3512 85E3513 85E3515 85E3516 85E3517 85E3518 85E3519 85E3525 85E3530 86E3531 86E3541 91E3542 91E3543 91

FF0000 33F1001 30F1002 30F1003 30F1004 30F1005 30F1006 30F1007 30F1008 30F1009 30F1010 30F1011 30F1012 30F1013 30F1014 30F1015 30F1016 30F1017 30F1018 30F1019 30F1020 30F1031 31F1032 31F1033 31F1034 31F1035 31F1036 31F1037 31F1038 31F1039 31F1040 31F1041 31F1042 31F1043 31F1044 31F1045 31F1046 31F1047 31F1048 31F1049 31F1050 31F1061 31F1062 31F1063 31F1064 31F1065 31F1066 31F1067 31F1068 31

F1069 31F1070 31F1071 31F1072 31F1073 31F1074 31F1075 31F1076 31F1077 31F1078 31F1079 31F1080 31F1081 31F1082 31F1083 31F1084 31F1085 31F1086 31F1087 31F1088 31F1089 31F2100 31F2101 31F2102 31F2103 31F2130 31F2131 31F2132 31F2133 31F2160 31F2161 31F2162 31F2163 31F2190 31F2191 31F2192 31F2193 31F3001 33F3002 33F3003 33F3004 33F3011 33F3012 33F3013 33F3014 33F3021 33F3022 33F3023 33F3024 33F3031 33F3032 33F3033 33F3034 33F3041 33F3042 33F3043 33F3044 33F3051 33F3052 33F3053 33F3054 33F3061 33F3062 33F3063 33F3064 33F3071 33F3072 33F3073 33F3074 33F3081 33F3082 33F3083 33F3084 33F3091 33F3092 33F3093 33F3094 33F3101 32F3102 32F3103 32F3104 32F3105 32F3106 32F3107 32F3108 32F3109 32F3110 32F3111 32F3112 32F3113 32F3114 32




Index by Code


F3588 33F3589 33F3590 33F3591 33F3592 33F3593 33F3594 33F3595 33F3596 33F3597 33F3598 33F3599 33F3600 33F3701 33F3702 33F3703 33F3704 33F3800 35F3801 35F3802 35F3803 35F3804 35F3805 35F3806 35F3807 35F3809 35F3810 35F3811 35F3812 35F3813 35F3814 35F3815 35F3816 35F3817 35F3818 35F3850 35F3851 35F3852 35F3853 35F3854 35F3855 35F3856 35F3857 35F3858 35F3859 35F3861 35F3862 35F3863 35F3864 35F3865 35F3866 35F3867 35F3868 35F3869 35F3870 35F3871 35F4000 34F4001 34F4004 34F4005 34F4006 34F4007 34F4008 34F4010 34F4011 34F4014 34F4015 34F4037 34F4038 34F4039 34F4040 34F4041 34F4042 34F4043 34F4044 34F4045 34F4046 34F4047 34F4048 34F4049 34F4050 36F4051 36F4052 36F4053 36F4054 36F4055 36F4056 36F4070 36F4071 36F4072 36F4073 36F4074 36

F4075 36F4076 36F4077 36F4078 36F4079 36F4080 36F4081 36F4082 36F4083 36F4084 36F4085 36F4086 36F4087 36F4088 36F4089 36F4090 36F4091 36F4092 36F4093 36F4094 36F4095 36F4096 36F4097 36F4098 36F4099 36F4100 36F4130 36F4131 36F4135 37F4136 37F4137 37F4138 37F4140 37F4141 37F4142 37F4143 37F4150 37F4151 37F4155 37F4156 37F4157 37F4158 37F4159 37F4160 37F4161 37F4162 37F4163 37F4164 37F4165 37F4170 37F4171 37F4172 37F4173 37F4200 37F4201 38F4202 38F4204 36F4205 36F4207 38F4208 38F4209 38F4210 38F4211 38F4212 38F4213 38F4215 38F4216 38F4217 38F4220 38F4221 38F4222 38F4223 38F4224 38F4225 38F4226 38F4228 38F4230 38F4231 38F4232 38F4233 38F4234 38F4235 39F4236 39F4237 39F4238 39F4239 39F4240 39F4300 40F4305 40F4306 40F4307 41F4308 41

LLJU21A 11LJU22A 11LJU22C 11LJU23A 11LJU23C 11LJU31A 11LJU32A 11LJU33A 11LJU41A 11LJU42A 11LJU43A 11LJU5A 11

PP1002 130P1003 130P1004 130P1012 130P1014 130P1015 130P1016 130P1017 130P1018 131P1019 131P1020 131P1021 131P1022 132P1023 132P1024 132P1025 132P1026 132P1027 132P1028 132P1029 133P1030 133P1031 131P1040 133P1041 133P1042 133P1045 134P1046 134P1047 134P1048 134P1049 134P1050 134P1060 134P1061 135P1062 135P1063 135P1064 135P1065 135P1066 135P1067 135P1070 135P1071 135P1072 135P1073 135P1074 135P1075 135P1076 135P1080 135P2001 136P2002 136P2003 136P2004 136P2005 136P2006 136P2007 136P2008 136P2009 136P2010 136P2011 136P2012 136P2013 136P2014 136P2015 136P2016 136P2017 136P2018 136P2019 136P2020 136P2021 136P2022 136P2023 136P2024 136P2025 136P2026 136P2027 136P2028 136P2029 136P2030 136

P2031 136P2032 136P2033 136P2034 136P2035 136P2036 136P2037 136P2038 136P2039 136P2040 136P2041 136P2042 136P2043 136P2044 136P2045 136P2046 136P2047 136P2048 136P2049 136P2050 136P2051 136P2052 136P2053 136P2054 136P2055 136P2056 136P2057 136P2058 136P2059 136P2060 136P2061 136P2062 136P2063 136P2064 136P2065 136P2066 136P2067 136P2068 136P2069 136P2070 136P2071 136P2072 136P2073 136P2074 136P2075 136P2076 136P2077 136P2078 136P2079 136P2080 136P2081 136P2082 136P2083 136P2084 136P2085 136P2086 136P2087 136P2088 136P2089 136P2090 136P2091 136P2092 136P2093 136P2094 136P2095 135P2096 135P2097 137P2098 137P2099 137P3000 137P3001 137P3002 137P3003 137P3004 137P3005 137P3006 137P3007 137P3008 137P3009 137P3010 137P3011 137P3012 137P3013 137P3014 137P3015 137P3016 137P3017 137P3018 137P3019 137P3020 137P3021 137P3022 137

P3023 137P3024 137P3025 137P3026 137P3027 137P3050 137P3051 137P3052 137P3053 137P3054 137P3055 137P3056 137P3057 137P3058 137P3059 137P3060 137P3061 137

QQ2001 52Q2002 52Q2003 52Q2004 52Q2006 52Q2007 52Q2008 52Q2009 52Q2010 52Q2011 52Q2012 53Q2013 53Q2014 53Q2015 53Q2016 53Q2017 53Q2018 53Q2019 53Q2020 53Q2021 61Q2022 61Q2023 61Q2024 61Q2025 62Q2026 62Q2027 62Q2028 62Q2029 62Q2030 62Q2031 62Q2032 62Q2033 62Q2034 62Q2035 62Q2036 62Q2037 52,62Q2038 62Q2039 61Q2040 61Q2041 61Q2042 61Q2043 61Q2044 62Q2045 62Q2046 61Q2047 52Q2048 61,52Q2049 61,52Q2050 61Q2051 61Q2052 61Q2053 61Q2054 52,61Q2055 61Q3001 54Q3002 54Q3003 55Q3005 54Q3006 55Q3007 55Q3008 56Q3009 56Q3010 56Q3011 56Q3020 58Q3021 58Q3022 58Q3023 58Q3024 57Q3025 57Q3026 57Q3027 57Q3028 59

Q3029 59Q3030 57Q3031 59Q3032 58Q3033 57Q3034 59Q3035 59Q3036 59Q3038 60Q3039 60Q3040 60Q3041 60Q3042 60Q3043 60Q3044 60Q3045 60Q3047 60Q3050 60Q3051 60Q3052 60Q3053 60Q3056 60Q3060 59Q3061 59Q5000 64Q5001 64Q5002 64Q5005 64Q5007 65Q5008 65Q5009 65Q5010 65Q5011 65Q5012 65Q5013 65Q5014 65Q5015 65Q5016 65Q5017 66Q5018 66Q5019 66Q5020 66Q5021 66Q5022 66Q5023 67Q5024 67Q5025 68Q5026 68Q5027 69Q5028 69Q5029 69Q5030 69Q5031 69Q5032 69Q5033 69Q5034 69Q5035 69Q5036 69Q5037 69Q5038 69Q5039 69Q5040 69Q5041 67Q5042 67Q5044 68Q5050 70Q5051 70Q5052 70Q5053 70Q5054 70Q5057 70Q5058 70Q5059 70Q5070 63Q5071 63Q5072 63QCST1000T 116QCST1000TR116QCST1160 116QCST1160R 116QCST412T 116QCST412TR116QCST500T 116QCST500TR116QCST565 116QCST565R 116QCST625T 116QCST625TR116QCST700 116QCST700R 116QCST750T 116QCST750TR116

QCST840 116QCST840R 116QCST875T 116QCST875TR116

SS2001 140S2002 140S2003 140S2004 140S2005 140S2101 140S2102 140S2103 140S2104 140S2105 140S2106 140S2107 140S2119 140S2120 140S2121 140S2122 140S2123 140S2124 140S2125 141S2126 141S2127 141S2130 141S2131 141S2132 141S2133 141S2135 141S2136 141S2140 141S2141 141S2142 141S2143 141S2144 141S2150 141S2151 141S2152 141S2201 140S2202 140S2203 140S2204 140S2205 140S2206 140S2207 140S4000 143S4001 143S4002 143S4003 143S4004 143S4005 143S4010 143S4011 143S4012 143S4013 143S4014 143S4015 143S4020 143S4021 143S4022 143S4023 143S4024 143S4025 143S4026 143S4027 143S4028 143S4029 143S4030 143S4031 143S4032 143S4033 143S4034 143S4035 143S4036 143S4037 143S4038 143S4039 144S4040 144S4041 144S4042 144S4043 144S4044 144S4050 142S4051 142S4052 142S4053 142S4054 142S4055 142S4056 142

S4057 142S4058 142S4060 142S4061 142S4062 142S4063 142S4064 142S4065 142S4066 142S4070 145S4071 145S4072 145S4073 145S4074 145S4075 145S4080 144S4081 144S4082 144S4083 144S4084 144S4085 144S4086 144S5000 145S5005 145S5006 145S5007 145S5020 146S5021 146S5022 146S5030 146S5031 146S2137 146S2138 146S2139 146

TT5000 8T5001 8T5002 8T5004 8T5005 8T5006 8T5007 8T5008 8T5009 8T5010 8T5011 8T5012 8T5013 8T5014 9T5015 9T5016 9T5020 9T5021 9T5022 9T5023 9T5024 9T5025 9T5030 9T5031 9T5032 9T5033 9T5034 9T5035 9T5036 9T5037 9T5039 11T5040 11T5041 11T5042 11T5043 11T5044 11T5045 11T5046 12T5047 12T5049 12T5050 13T5052 13T5053 12T5054 12T5055 12T5056 13T5057 13T5058 13T5059 13T5060 13T5061 13T5062 13T5063 13T5064 13T5065 13T5066 13

T5067 13T5068 13T5069 13T5070 13T5071 13T5072 13T5073 13T5074 13T5075 13T5076 13T5077 13T5078 13T5090 14T5091 14T5092 14T5093 14T5094 14T5095 14T5096 13T5097 13T5098 13T5100 10T5100B 10T5100G 10T5101 10T5102 10T5103 10T5104 10T5105 10T5106 10T5107 10T5108 10T5109 10T5110 10T5111 10T5112 10T5113 9T5121 10T5123 10T5124 10T5125 10T5200 7T5201 7T5202 7T5203 7T5204 7T5205 7T5206 7T5220 7T5221 7T5222 7T5223 7T5224 7T5225 7T5226 7T5250 7,127T5251 7TA1005 7TA2005 7TA2505 7TA5005 7TA10005 7TA20005 7TCT10 14TCT10C 14TCT10EA 14TCT10EC 14TCT10FA 14TCT10IA 14TCT10T 14TCT20 14TCT20C 14TCT20EA 14TCT20EC 14TCT20FA 14TCT20IA 14TCT20T 14TCT30 14TCT30C 14TCT30EA 14TCT30EC 14TCT30FA 14TCT30IA 14TCT30T 14TCT40 14TCT40C 14TCT40EA 14TCT40EC 14TCT40FA 14TCT40IA 14TCT40T 14TCT50 14

Index by Code


TCT50C 14TCT50EA 14TCT50EC 14TCT50FA 14TCT50IA 14TCT50T 14TCT60 14TCT60C 14TCT60EA 14TCT60EC 14TCT60FA 14TCT60IA 14TCT60T 14TCT70 14TCT70C 14TCT70EA 14TCT70EC 14TCT70FA 14TCT70IA 14TCT70T 14TCT80 14TE0505 6TE05063 6TE0509 6TE10005 6TE100063 6TE10009 6TE1005 6TE10063 6TE1009 6TE2005 6TE20063 6TE2009 6TE5005 6TE50063 6TE5009 6TEA05 7TEA10 7TI02B200 6TI02W200 6TI03B200 6TI03W200 6TI04B200 6TI04W200 6TI06B200 6TI06W200 6TI100EB 6TI100EW 6TI10B200 6TI10EB200 6TI10EW100 6TI10EW200 6TI10W100 6TI10W200 6TI15W 6TI160EW 6TI200EW 6TI20B 6TI20B200 6TI20EB200 6TI20EW100 6TI20EW200 6TI20W 6TI20W100 6TI20W200 6TI25EW 6TI25EW100 6TI25EW200 6TI25W 6TI25W100 6TI25W200 6TI320EW 6TI32EW 6TI40EW 6TI50EB 6TI50EW 6TI80EW 6TIE100E 6TIE10E 6TIE200E 6TIE20E 6TIE300E 6TIE320E 6TIE50E 6TMT16 14TMT16C 14TMT16EA 14TMT16EC 14TMT16FA 14TMT16IA 14TMT16T 14TMT25 14

TMT25C 14TMT25EA 14TMT25EC 14TMT25FA 14TMT25IA 14TMT25T 14TMT38 14TMT38C 14TMT38EA 14TMT38EC 14TMT38FA 14TMT38IA 14TMT38T 14TMT40 14TMT40C 14TMT40EA 14TMT40EC 14TMT40FA 14TMT40IA 14TMT40T 14TSFMT16 14TSFMT25 14TSFMT38 14TSFMT40 14

WW1001 100W1002 100W1003 100W1004 100W1006 100W1007 100W1008 100W1009 100W1010 100W1011 100W1012 100W1020 100W1022 100W1023 100W1028 100W1029 100W1030 100W1031 100W1032 100W1033 100W1034 100W1039 101W1040 101W1041 101W1042 101W1043 101W1044 101W1045 101W1046 101W1047 101W1048 101W1049 101W1050 101W1051 101W1052 101W1053 101W1055 102W1056 102W1057 106W1058 106W1060 101W1061 101W1062 101W1063 101W1064 100W1070 101W1071 101W1072 101W1075 104W1076 104W1077 104W1078 104W1079 104W1080 104W1081 104W1082 104W1083 104W1084 104W1085 104W1086 105W1087 103W1088 103W1089 103W1090 103W1091 105W1092 105

W1093 105W1094 105W1095 105W1096 105W1097 105W1100 103W1101 103W1102 103W1103 103W1104 103W1105 105W1107 102W1108 102W1109 102W1110 102W1111 102W1112 102W1113 102W1114 102W1115 102W1116 102W1117 102W1118 102W1119 103W1120 103W1121 103W1122 103W1123 103W1124 103W1125 103W1126 103W1127 103W1128 108W1129 103W1130 103W1131 103W1132 102W1134 102W1135 102W1136 108W1137 108W1138 105W1139 105W1140 105W1141 105W1142 105W1143 105W1144 105W1145 108,148W1146 108,148W1147 108,148W1148 108,148W1149 102W1150 102W1151 102W1152 102W1153 102W1154 102W1155 102W1156 101W1157 101W1158 101W1159 101W1160 108W1161 108W1162 108W1163 108W1164 108W1165 108W1168 108W1169 109W1170 109W1171 109W1172 109W1173 109W1174 109W1175 109W1175M 109W1176 109W1176M 109W1177 109W1177M 109W1178 109W1179 109W1181 106W1182 106W1183 106W1184 106W1185 106W1186 106W1187 106W1188 106

W1189 106W1190 106W1194 106W1195 107W1196 107W1197 107W1198 107W1199 107W1200 107W1201 107W1203 107W1204 107W1205 107W1206 107W1207 107W1208 107W1209 105W1210 105W1212 108W1213 108W1214 108W1215 107W1220 104W1221 104W1222 104W1224 104W1225 109W1226 109W1227 109W1228 109W1229 109W1230 109W1231 109W1232 109W1233 109W1234 109W1235 109W1236 109W1237 109W1238 110W1239 110W1240 110W1241 110W1242 110W1243 110W1244 110W1245 110W1246 110W1247 110W1248 110W1250 107W1251 107W1260 106W2000 121W2005 121W2006 121W2008 121W2009 121W2010 121W2011 121W2012 121W2013 122W2014 122W2015 122W2016 122W2017 126W2018 122W2019 123W2020 123W2021 123W2022 123W2023 123W2024 123W2025 123W2026 123W2027 124W2028 124W2029 124W2030 124W2031 124W2032 124W2033 124W2034 124W2035 124W2036 124W2037 124W2040 125W2042 125W2043 125W2044 125W2045 125W2046 125

W2047 125W2048 125W2049 125W2050 125W2051 125W2052 125W2053 125W2054 125W2055 125W2056 125W2057 126W2058 126W2059 126W2060 126W2061 126W2062 126W2063 126W2064 126W2065 126W2066 126W2067 126W2068 126W2069 126W2071 121W2072 124W2074 128W2075 128W2076 128W2077 128W2078 126W2079 126W2080 126W2081 126W2082 126W2083 126W2084 126W2085 126W2086 126W2087 126W2088 122W2090 122W2092 126W2093 126W2095 122W2096 122W2097 122W2098 121W2100 128W2101 128W2110 128W2111 128W2115 124W2116 124W2118 123W2119 123W2121 123W2122 123W2133 122W2137 123W2138 123W2139 123W2140 124W2141 124W2142 124W2150 120W2151 120W2152 120W2153 120W2154 120W2155 120W2156 120W2150-F 120W2151-F 120W2152-F 120W2153-F 120W2154-F 120W2155-F 120W2156-F 120W2150-I 120W2151-I 120W2152-I 120W2153-I 120W2154-I 120W2155-I 120W2156-I 120W2161 121W-29104 116W-29105 116W-29106 116W-29108 116W-29109 116W-29111 116

W-29112 116W-29113 116W3000 114W3001 114W3002 114W3003 114W3004 114W3005 114W3006 114W3007 114W3009 114W3010 114W3011 114W3012 114W3013 114W3014 114W3015 114W3016 114W3017 114W3018 114W3019 114W3020 114W3021 114W3022 114W3023 114W3024 114W3025 115W3026 115W3027 115W3028 115W3030 115W3031 115W3032 115W3033 115W3034 115W3035 115W3036 114W3037 115W3038 115W3039 115W3040 115W3041 115W3043 115W3044 117W3045 117W3046 117W3048 117W3049 117W3050 118W3051 118W3052 118W3053 118W3054 118W3055 118W3056 118W3057 118W3058 118W3059 118W3060 118W3061 118W3062 118W3063 118W3064 115W3065 115W3066 115W3070 115W3071 115W3072 115W3073 115W3074 115W3075 115W3076 115W3077 115W3078 115W-31230 116W-31235 116W-33837 116W-33847 116W-34927 116W-34942 116W-34943 116W4000 111W4001 111W4002 111W4003 111W4004 111W4005 111W4006 111W4007 112W4008 112W4009 112W4010 111

W4011 111W4012 112W4013 112W4014 112W4015 112W4016 112W4017 112W4018 112W4019 112W4020 111W4021 111W4022 111W4023 111W4024 111W4025 111W4026 111W4027 113W4028 113W4029 112W4030 39W4031 39W4032 111W4033 113W4034 39W4036 112W4037 112W4038 112W4040 112W4041 112W4042 112W4043 112W-CB114K 116W-CB115K 116W-CB116K 116W-CB117K 116W-CB118K 116W-CB119K 116W-CB137K 116W-CB138K 116W-CB146K 116W-CB158K 116W-CB26 116W-CB26 117W-CB60 116W-CB60 117WCB6667H 117W-CB6667H 116W-CST 117W-CST1000 117W-CST1000R117W-CST1160 117W-CST1160R117W-CST412 117W-CST412R 117W-CST500 117W-CST500R 117W-CST565 117W-CST565R 117W-CST625 117W-CST625R 117W-CST700 117W-CST700R 117W-CST750 117W-CST750R 117W-CST840 117W-CST840R 117W-CST875 117W-CST875R 117W-JST 116W-JST1000 116W-JST1000T116W-JST1160 116W-JST1160T116W-JST412 116W-JST412T 116W-JST500 116W-JST500T 116W-JST565 116W-JST565T 116W-JST625 116W-JST625T 116W-JST700 116W-JST700T 116W-JST750 116W-JST750T 116W-JST840 116W-JST840T 116W-JST875 116W-JST875T 116W-QCST 116W-QRT 117W-QRT1125 117

W-QRT1125R117W-QRT500 117W-QRT500R117W-QRT540 117W-QRT540R117W-QRT715 117W-QRT715R117W-QRT860 117W-QRT860R117

XX1001 44X1002 44X1005 44X1006 44X1007 44X1008 44X1009 44X1010 44X1020 44X1021 44X1022 44X1023 44X1024 44X1025 44X1026 44X1027 44X1028 44X1030 44X1031 44X1032 44X1033 44X1034 44X1035 44X1036 44X1037 44X1038 44X1045 45X1046 45X1047 45X1055 45X1056 45X1057 45X1060 45X1061 45X1062 45X2020 46X2021 46X2022 46X2023 46X2024 46X2025 46X2026 46X2027 46X2028 46X2029 46X2030 46X2031 46X2032 46X2033 46X2034 46X2035 46X2036 46X2037 46X2038 46X2039 46X2040 46X2041 46X2042 46X2043 46X2044 46X3020 48X3021 48X3022 48X3023 48X3025 48X3026 48X3027 48X3028 48X3029 48X3030 48X3031 48X3032 48X3033 48X3034 48X3035 48X3036 48X3037 48X3038 48X3039 48X3040 48X3041 48

X3042 48X3045 48X3046 48X3047 48X4000 49X4001 49X4004 49X4006 49X4010 49X4012 49X4030 47X4031 47X4032 47X4033 47X4034 47X4035 47X4040 48X4041 48X4042 48X4043 48X4044 48X4045 48X4047 47X4048 47X4050 46X4051 46X4052 46X4053 46X4056 46X4057 46X4058 46X4059 46X4062 47X4063 47X4064 47X4065 47X4068 47X4069 47X4070 47X4071 47X4074 47X4075 47X4078 47X4079 47X4082 47X4083 47X4084 47X4085 47X4088 47X4089 47X4090 47X4091 47X6000 49X6001 49X6002 49X6003 49X6004 49X6005 49X6006 49X6007 49X6010 49X6011 49X6015 49X6016 49X6018 49X6030 49X6031 49X6032 49X6033 49X6034 49X6035 49X6036 49X6037 49X6050 49

Credit Application

TELKOM INTERNATIONAL LTDAPPLICATION FOR CREDIT

Please complete in capital letters. *Tick as applicable.

Owner's full name or name of Limited Company

Company Registration No: ……………………………………………………………..

Delivery Address If not a Limited Company or Plc, owner's home address

Postcode:

Telephone:

Fax:

Contact Postcode:

Invoice Address: (if different from Delivery Address) Banker's Name:Branch:

Postcode: Postcode:

Telephone: Bank Sort Code:

Fax: Account No:

Trade References to support required credit limit (Recognised established companies only)

1. 2.

Postcode: Postcode:

Telephone: Telephone:

Fax: Fax:

IMPORTANT: PLEASE ATTACH A REQUIRED CREDIT LIMIT: £LETTERHEAD WITH THIS APPLICATION.

I/we hereby apply for a credit account with you and confirm that we agree to the standard terms and conditions on page 2 which wehave been made aware of and give consent for our bank to divulge information to Telkom International Ltd

The above details are correct. Please print

Name:Proprietor's signature orDirector's signature for Limited Company/PLC Position:

Date:

Please return to:

Telkom International Ltd, Unit 12A Templars Way Industrial Estate, Marlborough Road, Wootton Bassett, SWINDON,Wilts SN4 7SA Telephone: 01793 848123 Fax: 01793 853953Registered in England and Wales 2835628 VAT No: 618 2255 48

terms and conditions 12/8/09 12:03 Page 1

Terms and Conditions

TELKOM INTERNATIONAL LTDTERMS AND CONDITIONS OF SALE

1. Application of conditionsAll estimates, quotations, services and goods supplied by us to customers are subject to these conditions and no variation will applyunless agreed by us in writing.

2. Prices All prices quoted are EXCLUSIVE OF VAT AND CARRIAGE, which will be added to all invoices at the date of invoice. We reservethe right to alter prices without notice. New prices will always be advised when an order is placed. Unless otherwise stated inwriting, all quotations are only valid for 30 days from the date shown on the quotation.

3. PaymentCustomers who anticipate purchasing on a regular basis should apply for credit facilities by completing our credit applicationprocedure. Payment other than by credit terms can be made by the following:-a) cash, credit card or Bankers draft with orderb) cheque with order. 3 working days must be allowed after receipt of a cheque by us for its clearance, before the goods will bedispatched.

4. Settlement termsWithout exception invoices originated by us are due for payment NET within 30 days of the date of invoice. No further goods will besupplied to a customer's account should any overdue invoices remain unpaid at the end of the month in which payment is due.We reserve the right to withdraw all credit facilities if payments are not received on time.

5. AvailabilityWe aim to maintain stock levels for immediate shipment, but should certain items be out of stock, these will be placed on back orderfor shipment as soon as stocks arrive. We shall not be liable for the consequences of any delay, for any reason, in fulfilling acustomer's order.

6. Loss or damage in transitWe will replace goods which fail to arrive or arrive in damaged condition. All such claims must be made in writing to us within 7 daysof despatch, failing which no claim will be entertained by us. For export orders this notification period is extended to 60 days.

7. Defective goodsUnless otherwise stated in writing, the warranty on goods supplied is limited to faulty materials or workmanship and only for a periodof 12 months after the date of despatch by us. If goods should prove to be defective, we will arrange for a refund or replacement asrequested. No warranty will apply to goods which have been modified or altered in any way, or to defective goods, to whichunauthorised repairs have been made.We shall not be liable for any loss, damage, expense or injury resulting from the defectiveness of the goods.

8. All items are supplied on an as seen basis. In the case of Krone type equipment, we do not warrant any products that are of Krone manufacture or are new or that cataloguephotographs of such product are of Krone manufacture or are new. We aim to provide products fit for purpose and to providecomplete satisfaction. If you are not completely satisfied, please inform us immediately and we will arrange for a replacement orrefund, as requested.

9. Return of goodsGoods may only be returned to us by prior arrangement. Goods returned for reasons other than being faulty or defective must beunused, in saleable condition, and in the original packing, sent freight paid to us. Such returns will be subject to a 10% handlingcharge. Goods which have been specially made, modified or purchased for a customer may not be returned for credit. No returnedgoods will be accepted more than 30 days after the goods were despatched by us (extended to 45 days for export orders) and nocredit will be allowed unless supported by our goods return authorisation number.

10. DescriptionsThe photographs, dimensions, specifications and type numbers in our catalogue are shown only as a guide, and although we willusually supply the exact product shown, we reserve the right on occasions to supply similar items offering the same functions.

11. Accuracy of informationWhile we make every effort to ensure the accuracy of the information shown in our catalogue, we can accept no liability for any loss,damages or injury arising directly or indirectly from any error or omission in such information.

12. Reservation of titleThe ownership of the goods shall not pass from us to you the customer until we have received payment in full for the goods.

terms and conditions 12/8/09 12:03 Page 2

Date post:	20-Jun-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

2010 Catalogue - Telkom International · 2018. 9. 5. · 2010 Catalogue p.4 p.7 p.4 p.18 p.22 p.25...

Documents