2010 Insight Optics LE Catalog

8/3/2019 2010 Insight Optics LE Catalog

1/24

Built for BattleReady for Patrol

LAW ENFORCEMENT

PRODUCTS


2/24

Business Card

Table of Contents

Welcome 1

Electro-Optical Sights & Aiming Devices

MTM (Mini Thermal Monocular - AN/PAS-23) 2MTM-V2 (Mini Thermal Monocular-V2) 3LCD Screen (For use with Mini Thermal Monocular) 3WTM (Weapon-Mounted Mini Thermal Monocular) 3CNVD-T(Clip-On Thermal Sight - SU-232/PAS) 4

IWNS-I2

(Individual Weapon Night Sight - AN/PVS-24A) 4CNVD-T2 (Clip-On Thermal Sight-V2) 5ATPIAL (Advanced Target Pointer/Illuminator/Aiming Light - AN/PEQ-15) 6ITPIAL (Infrared Target Pointer/Illuminator/Aiming Light - AN/PEQ-2A) 7

Weapon-Mounted Tactical Illuminators - LED

M3X LED (Tactical Illuminator) 9M6X LED (Tactical Laser Illuminator) 9M3 LED (Tactical Illuminator) 10M6 LED (Tactical Laser Illuminator) 10X2 LED (Subcompact Tactical Illuminator) 10X2L LED (Subcompact Tactical Laser Illuminator) 10WX150 (Tactical Illuminator) 11Weapon-Mounted Tactical Illuminators - Xenon

M3X (Tactical Illuminator) 12M6X (Tactical Laser Illuminator) 12M3 (Tactical Illuminator) 12M6 (Tactical Laser Illuminator) 12X2 (Subcompact Tactical Illuminator) 12X2L (Subcompact Tactical Laser Illuminator) 12LED Bezel Upgrades 13Weapon-Mounted Accessories 14

Tactical LED Flashlights

HX120(Programmable) 15HX150 (Programmable) 15HX150R(Programmable/Rechargeable) 15HX200(Programmable) 15

MRDS (Mini Red-Dot Sight) 16LBS (Laser Borelight System - AN/PEM-1) 17Fit Charts 18Warranty Information 20Demonstrations, Grant Writing Assistance, IR Laser Products

Disclosure, Export Notice 21

9 Akira Way, Londonderry, NH 03053

Toll Free: 866-509-2040Fax: 603-668-1084

wwwInsightTechnologycom


3/24

Insight Technology today stands as a world leader in the design, development

and manufacture of tactical lasers, illuminators and thermal imaging equipment.

Founded over 20 years ago in the basement of a familys home, Insight has grownto become the recognized leader in this area and the company the U.S. Armed

Forces turn to for vital, life-saving equipment such as the ATPIAL, CNVD-T and the

MTM, to name just a few.

From day one, our commitment to delivering the best products possible to our

customers has been steadfast because weve always understood that each andevery unit we make could mean the difference between life and death, not just

in the military combat zones around the world but also in the war on terror here

at home.

This is why Insight Technology takes issues of quality and performance so

seriously. When it comes to the development of Insight products, our engineers

and eld staff review after action reports, interview special operations personnel,attend briengs and training sessions, as well as oversee a battery of extensive

laboratory and situational testing - all in an effort to fulll our mission: Toprovide the defenders of freedom and rst responders with the advantages theyneed to get the job done.

Today, this mission is more important than ever, for we live in a dangerous worldwhere any advantage is critical to personal safety and an operations success. As

you will see in this catalog, our proud military heritage and technology crosses

our entire line of products. We hope that you, the rst responder, will come todepend upon Insight Technology products to Dominate the Darkness and to help

keep you safe today and every day.

For more information on the full line of Insight Technology products we inviteyou to visit us online at

InsightTechnologycom

Welcome

WWW.INSIGHTTECHNOLOGY.COM


4/24

Objective Len

BatteryCompartment

LaserDesignator

Power/MenuButton

Up/DownButtons

Video Jack

Eyepiece

Focus Ring

Lanyard Loop

Eyepiece

Eyepiece Focus Ring

Laser Activation Button

Video Jack

Objective Lens Focus Ring

Objective Lens

Battery Compartment

Laser Designator

MTMMini Thermal Monocular

(AN/PAS-23)*

The MTM is a durable, lightweight hand-held thermal imager

that gives Law Enforcement agencies and rst responders the

ability to Dominate the Darkness through its state-of-the-arttechnology.

Originally designed for the U.S. Armed Forces for use in military

operations, the MTM gives the user the ability to see in low lightand no light situations including smoke, fog and snow.

The high-resolution imager allows detection of a man-sized

target out to 600 meters, recognition at 150 meters and

identication at 70 meters. The optional 3x extender enhancesdetection out to 1,500 meters.

Weighing in at only 11.8 oz, including batteries, the MTM easily

ts in uniform pockets for quick deployment in the detection,

recognition and identication of potential suspects and victims.

Features Functions In Sunlight or Total Darkness Penetrates Most Weather Conditions Sensitivity to .07 Temperature Differences White Hot or Black Hot

Low Battery Indicator Target Detection up to 600 meters Target Detection up to 1,500m with Optional 3X Extender Weighs 11.8oz w/Batteries Powerful, Compact and Portable

Specications Integrated IR Laser Helmet Mountable -34C to +50C Operational Temp Waterproof to 66ft, Drop Tested to 6ft 4 Hour Run Time

Part #:MTM-000-A4 (MTM-Visible)MTM-000-A6 (MTM-IR)

Rear View(actual size)

Front View(actual size)

Top View(actual size

2 WWW.INSIGHTTECHNOLOGY.COM


5/24

MTM-V2 w/LCDMini Thermal Monocular*

(shown w/optional LCD Screen accessory)

The DHS/FEMA CEDAP approved MTM-V2, available with an optional 3.5 detachable waterproof LCD display with anti-glare screen,

provides agencies with greater operational versatility in the deployment of thermal imaging. The unit can be mounted on a tripod,used as a hand-held monocular, deployed hand-held

with the LCD display or mounted to a helmet

with the optional helmet mount,

offering the broadest range of

Law Enforcement applicationsin one package.

Multiple Kit Options forIncreased Mission Versatility

-10C to +50C Operational Temp Waterproof to 3ft. 4 Hour Run Time

Part #:MTM-000-A5 (V2-Visible)MTM-000-A3 (V2-IR)

LCD Screen Accessory SpecicationsInterface Options

Designed to Fit the MTM-V2Dimensions . . 4W x 1.6W x 3.6H

Weight . . . . . 13.5 oz. w/BatteriesScreen . . . . . 3.5 Anti-GlareLithium Battery Power

Runs on any of the following 3 combinations(2) 18650 Rechargeable Lithium-ion(4) CR123 Rechargeable Lithium-ion(4) DL123 Lithium-ion

Voltage Acceptance 5 - 12 v

Part #:100-MTL01-0001

WTMWeapon-Mounted Mini

Thermal Monocular*

The Weapon-Mountable Mini Thermal Monocular

features a Picatinny rail interface and is hardened to

withstand the sustained recoil of 5.56mm tacticalloads while still delivering unparalleled thermal

imaging capability.

Use Hand-held or Weapon-mounted Ideal for Tactical Operations -34C to +50C Operational Temp Waterproof to 66ft. 4 Hour Run Time

Part #:

WTM-000-A14 (WTM-Visible)WTM-000-A16 (WTM-IR)

VISIBLE LASER RADIATIONAVOID DIRECT EYE EXPOSURE

PEAK POWER

4.3mW

WAVELENGTH

640-655nm

CLASS IIIa LASER PRODUCT

DANGER

* This Product is controlled forexport. Please see Back Cover formore information.



6/24

IWNS-I2

Individual Weapon Night Sight (AN/PAS-24A)*

The IWNS-I2, or AN/PVS-24A, is a rugged, weapon-mounted night imaging system that incorporates Gen III Image tubes for excellent range

performance. It is designed for use in conjunction with existing day sights to allow rapid transition between day and night operations without the

need to re-boresight. The system has demonstrated range performance out to 600 meters to enhance the operators ability to effectively engage

targets at night or under low light conditions such as dawn or dusk. The AN/PVS-24A is a combat proven system that provides the user a exible,effective tool for conducting night tactical operations.

Clip-On Night Sight that mounts in front of existing day optics without the need to re-boresight Attaches to the MIL-STD-1913 Rail with a single throw-lever mechanism for easy transition between day and night operations Compatible with the Rie Combat Optic, Close Combat Optic, and other common weapon-mounted day sights Qualied and proven in the harsh military operational environment

SpecicationsDimensions: . . . . . . . . 5.8 L x 3.7 W x 3.3 HWeight: . . . . . . . . . . . 28 oz. w/BatteryBattery type: . . . . . . . (1) 3-volt lithium or AABattery life: . . . . . . . . 30 HoursField of View: . . . . . . . 8Alignment Accuracy: . . 1.0 MOARecognition Range: . . ~600m

Recognition Range at moon

CNVD-TClip-On Thermal Sight (SU-232/PAS)*

Insights CNVD-T (Clip-On Night Vision Device-Thermal) is a weapon-mounted thermal weapon sight. The thermal imaging capability of the CNVD-T

allows for observation and target identication under adverse conditions including light rain, smoke, light snow, and low light to total darkness. The

CNVD-T incorporates a reticle used for weapon aiming.

SpecicationsDimensions: . . . . . . . 6 L x 2.7 W x 3.3 HWeight: . . . . . . . . . . 21 oz. w/BatteriesBattery Type: . . . . . . (4) 3-volt lithiumBattery Life: . . . . . . 8.5 hoursField of View: . . . . . . 25 diagonal

Magnication: . . . . . 1X with 2X digital zoom

Focus Range: . . . . . . 1m to innityFrame Rate: . . . . . . . 60 HzDetection Range: . . . ~600m (stationary man)

Part #:CQB-001-A7 (Tan)

CNVD-T

Part #:IWNS-950



7/24

CNVD-T2Clip-On Thermal Sight*

Insights Clip-On Night Vision Device - Thermal 2 (CNVD-T2)

is a hand-held or weapon-mounted thermal imaging device

with an integrated laser pointer. The CNVD-T2 is optimized

for use in conjunction with magnied optical and red dotsights. The thermal imaging capability of the CNVD-T2

allows for observation and target identication under

adverse conditions including light rain, smoke,

light snow, and low light to total darkness.Its laser pointer allows for active

target designation.

Insights Ultra VOxenhanced thermal imager

Clip-On, Clip-Offthermal capabilities

Designed for usewith magnied optics

Picture taking capability -Able to capture and storeimages for download to apersonal computer

Specications

Dimensions: . . . . . . 5.3 L X 2.8 W X 3.4 HWeight: . . . . . . . . . . 20 oz. w/BatteriesBattery Type: . . . . . . (2) 3-volt lithiumBattery Life: . . . . . . 4.5 hoursMagnication: . . . . . 1X (2X digital zoom)Focus Range: . . . . . . 3m to innityFrame Rate: . . . . . . . 60 HzRecognition Range: . . ~1500m

Part #:CQT-001-A12

Dimensions include the objective lens cover and weapon mount.

IWNS-I2

CNVD-T2

VISIBLE LASER RADIATIONAVOID DIRECT EYE EXPOSURE

PEAK POWER

4.3mW

WAVELENGTH

640-655nm


DANGER


* This Product is controlled forexport. Please see Back Cover formore information.


8/24

ATPIAL Advanced Target Pointer/Illuminator/Aiming Laser (AN/PEQ-15)*

Insights Standard Power Advanced Target Pointer Illuminator Aiming

Laser (ATPIAL) is a small, lightweight, easy-to-use aiming system

with integrated infrared and visible aim lasers as well as an infrared

illuminator.

Co-aligned visible and infrared lasers Hardened for use on small arms and crew served weapons

Specications:Dimensions: . . . . . . . 4.6l x 2.8w x 1.6hWeight: . . . . . . . . . . 7.5 oz. w/BatteryBattery Type: . . . . . . (1) 3v DL123 batteryBattery Life: . . . . . . >6 Hours in Dual High

Visible Aim LaserOutput: . . . . . . . . . . 4.0 mW (Class IIIa)Beam Divergence: . . . 0.5 mradWavelength: . . . . . . 605-665 nmRange: . . . . . . . . . . >25m

IR Aim LaserOutput Power Low: . . 0.6 mW (Class I)Output Power High: 25 mW (Class IIIb)

Beam Divergence: . . . 0.5 mradWavelength: . . . . . . . 820-850 nmRange: . . . . . . . . . . >600m (Low), 2000m (High)

IR IlluminatorOutput Power Low: . . 3.5 mW (Class IIIa)Output Power High: . . 30 mW (Class IIIb)Beam Divergence: . . . 1-105 mrad (min)Wavelength: . . . . . . 820-850 nmRange: . . . . . . . . . . >2000m

Part #:ATP-000-A18 (Tan)ATP-000-A22 (Black)

IR Illuminator

Elevation & WindageAdjustment

Power Button

Battery Compartment

Visible & IR Lasers

Elevation & WindageAdjustment

Function Selector

Remote Port

Top View(actual size)

LASER RADIATIONAVOID DIRECT EXPOSURE TO BEAM

DANGER

LASER POWER WAVELENGTH CLASS

IR 50mW 830nm IIIb

VIS


9/24

ITPIAL Infrared Target Pointer/Illuminator/Aiming Light (AN/PEQ-2A)*

Insights Infrared Target Pointer Illuminator/

Aiming Light, or AN/PEQ-2A is a weapon-

mounted infrared aiming laser and illuminator

hardened for use on all small arms and crewserved weapons.

The U.S. Armed Forces standard for night directre aiming and illumination

Specications:Dimensions: . . . . . . . 6.7L x 3.1W x 1.4HWeight: . . . . . . . . . . 1 Hour in Dual Hi/Hi mode

IR Aiming LaserOutput Power Low: . . 0.6 mW (Class I)Output Power High: . . 25 mW (Class IIIb)Beam Divergence: . . . 0.5 mradWavelength: . . . . . . . 830 nm (Nominal)

IR IlluminatorOutput Power Low: . . 3.5 mW (Class IIIa)Output Power High: . . 30 mW (Class IIIb)Beam Divergence: . . . 1-105 mrad (min)Wavelength: . . . . . . . 830 nm (Nominal)

Part #:ITP-500C-A2

Front View(actual size)

Function Selector

Visible & IR Lasers

ITPIAL

Power Button

IR Illuminator

INVISIBLE LASER RADIATIONAVOID DIRECT EXPOSURE TO BEAM

OUTPUT POWER

6-25mW

WAVELENGTH

830nm

CLASS IIIb LASER PRODUCT

DANGER



10/24

For over 20 years Insight has engineered and produced advancedtactical vision enhancement products for the U.S. Armed Forces and LawEnforcement. Countless men and women serving our country and protectingour communities depend on the precision, reliability and durability of ourproducts.

The weapon-mounted systems on the following pages were all created withone objective in mind to provide the user with an undeniable advantagein low-light environments. From our new high-output X-Series and M-SeriesLED lights to our battle-seasoned M-Series Xenon assemblies, each weaponlight has been rigorously tested to perform without question.

Regardless of the application, our weapon-mounted lights and lasers aredesigned to perform. Functionality is the cornerstone of our product line.Thats why we offer ambidextrous multi-function switches that enable fast

and ready light/laser activation. Additionally, our optional remotes (M3/M6or M3X/M6X) for use with ries and shotguns, both pump-action and semi-auto, deliver versatility across all three rearm platforms.

Insights patented Slide-Lock interface system allows for instant tool-freemounting and removal on most pistol rails. In the M3X and M6X series,there are three interface options. The Universal Slide-Lock mount tsmost pistols, while the 1913 Slide-Lock mount is designed specically forthe true M1913 Mil-Spec Picatinny rail. Both Slide-Lock versions comewith an alternate latch bar to ensure the proper t. The Rail-Grabbermount ts most rail congurations whether for a pistol, rie or shotgunand utilizes an adjustable screw locking plate that can be tightenedto ensure a rock solid t. The Rail-Grabber mount is particularlyrecommended for heavy recoiling rearms.

No matter if its a pistol, rie or shotgun, or what the application scenario,Insight Technology has a weapon-mounted light or light/laser combo that

will give you the ability and the condence to - Dominate the Darkness!

Adjustable Slide-LockMount(Top View

Rail-Grabber Mount(Top View

1913 Slide-LockMount(Top View

Long GunBackplate

(Rear View of M6X Long Gun)

Universal Slide-LockMount(Top View

Ambidextrous RockerSwitch Backplate

(Rear View of M6X Pistol)

Ambidextrous RockerSwitch Backplate

(Rear View of M6)

Weapon-Mounted Tactical Illuminators

Remote Switch Port

Constant On/Remote Selecto

Multi-Function Switch

Off

Laser

Illuminator

Laser & Illuminator

Ambidextrous Rocker Switch



11/24

M3X LEDTactical IlluminatorM6X LEDTactical Laser Illuminator

The M3X Tactical Illuminator and M6X Tactical Laser Illuminator weredesigned and built for combat deployment with U.S. Special Operations

personnel. Available in either a pistol or long gun conguration, and

now equipped with a high-performance LED, each has a run time of 120

minutes and provides 150 lumens giving operators greater total darknessdomination. The M6X has the added feature of a Class IIIa visible red

laser adjustable for windage and elevation. The built-in Shock Suppression

System has been extensively tested and has survived a 44,000 round

torture test.

The M3X and M6X feature interchangeable backplates. For pistols an

ambidextrous rocker switch offers the operator the ability to activate in the

Momentary On or Constant On mode. The M6X has an additional 4-positionselector switch for Laser Only, White Light Only, or simultaneous Light &

Laser operation.

M3X Part #:M3X-700-A3 (1913) PistolM3X-700-A8 (Universal) PistolM3X-700-A13 (Rail-Grabber) PistolM3X-700-A1 (1913) Long GunM3X-700-A15 (Rail-Grabber) Long Gun

The long gun backplate utilizes a 3 position rotary switch for Off,

Momentary On and Constant On that is used in conjunction with a straighcord touch-pad remote. For pump-action shotguns an optional curly cord

remote is available.

There are 3 options for mounting the M3X and M6X. The patented Slide-

Lock system allows for instant tool-free mounting and removal. The

Universal Slide-Lock mount ts most pistols, while the 1913 Slide-Lockmount is designed specically for the true M1913 Mil-Spec Picatinny rail.

The Rail-Grabber mount ts most rail congurations whether for a pistol

rie or shotgun.

M6X Part #:M6X-700-A3 (1913) PistolM6X-700-A8 (Universal) PistolM6X-700-A13 (Rail-Grabber) PistolM6X-700-A1 (1913) Long GunM6X-700-A15 (Rail-Grabber) Long Gun

M3X & M6X Accessories:Contoured Pistol Remote BackplatePistol BackplateLong Gun BackplateLong Gun RemotesFlip-Up Filter Red and OpaqueBikini Filter in Red and Opaque

Specications:

SPECS/MODEL M6X Pistol M6X Long Gun M3X Pistol M3X Long Gun

Peak Output 150+ Lumens

Visible Laser Class IIIa Red/Range 200M Not Applicable

Run Time 120 Minutes 120 Minutes 120 Minutes 120 Minutes

Interface Options MIL-STD-1913 Slide-Lock,Universal Slide-Lock, or

Rail-Grabber

MIL-STD-1913 Slide-Lock,or Rail-Grabber

MIL-STD-1913 Slide-Lock,Universal Slide-Lock, or

Rail-Grabber

MIL-STD-1913 Slide-Lock,or Rail-Grabber

Dimensions 3.4L x 1.6W x 2.1H 3.6L x 1.6W x 2.1H 3.4L x 1.6W x 1.6H 3.6L x 1.6W x 1.6H

Waterproof Waterproof to 66 Feet

Weight 4.4 oz. w/Batteries 4.8 oz. w/Batteries 3.9 oz. w/Batteries 4.3 oz. w/Batteries

Lithium Battery Power 6 volts from two (123)

Warranty Limited Lifetime Warranty


PEAK POWER

5mW

WAVELENGTH

64040nm


DANGER



12/24

M3 LEDTactical IlluminatorM6 LEDTactical Laser Illuminator

Now equipped with a powerful LED for greater illumination and longer

run time, the M3 can be found in more Law Enforcement holsters

than any other rail-mounted light and has been the gold standard in

weapon-mounted illuminators since it was rst introduced in 1998. TheM6 expands on the great features of the M3 by adding a Class IIIa red

visible laser. Each delivers a peak output of 125 lumens and is powered

by two 123 lithium batteries for a run time of 120 minutes. Both the

M3 and M6 feature the patented Slide-Lock interface for easy tool-freemounting and dismounting to the rearm rail.

M3 Part #:GLL-700-A1 (Black)GLL-700-A5 (Tan)

M6 Part #:TLI-700-A1 (Black)TLI-700-A3 (Tan)

M3 & M6 AccessoriesCFL-300 M-Series Pistol BackplateCFL-270 M-Series Long Gun RemoteCFL-200 M-Series Shotgun Remote (curly)CFL-900-A1 Shotgun AdapterGLL-024 M-Series Latch Bar

CFL-700 Replacement Bulb for incandescent modelsCFL-800 Replacement Bezel for incandescent models

Specications:

SPECS/MODEL M3 M6 X2 X2L

Peak Output 125 Lumens 125 Lumens 80 Lumens 80 Lumens

Visible Laser Not Applicable Class IIIa Red/Range 200M Not Applicable Class IIIa Red/Range 200M

Run Time 120 Minutes 60 Minutes

Interface Options Slide-Lock Slide-Lock

Dimensions 3.4L x 1.6W x 1.5H 3.4L x 1.6W x 1.9H 2.4L x 1.4W x 1.6H 2.4L x 1.4W x 1.9H

Weight 3.3 oz. w/Batteries 3.7 oz. w/Batteries 1.7 oz. w/Batteries 1.9 oz. w/Batteries

Lithium Battery Power 6 volts from two (123) 3V from One (1) CR2 Battery

Warranty Limited Lifetime Warranty

X2 LEDTactical IlluminatorsX2L LEDTactical Laser Illuminators

The X2 and the X2L are the worlds rst and best subcompact weapon

mounted light/laser units now delivering a peak output of 80 lumens

from a new LED emitter. The X2L features a visible red Class IIIa laserwith a range of 200 meters. Both models are powered by one CR2 lithium

battery for a run time of 60 minutes. The X2 and X2L easily mount to

most sub-compact pistol rails utilizing Insights patented Slide-Lock

interface. The ambidextrous rocker switch allows the X2 and X2L to be

activated in either a Momentary On or Constant On mode. A two positionlaser switch on the X2L turns the laser on and off so it can be used in a

White Light Only or White Light and Laser mode.

X2 & X2L Part #:MTV-700-A1 (X2)MTV-701-A1 (X2L)


PEAK POWER

5mW

WAVELENGTH

64040nm


DANGER



13/24

True Ambidextrous Multi-Function Switch

(Rear View of WX150 Shown)

Double Tap for Strobe in any Direction

Constant

Momentary

Strobe

Constant

Momentary

Strobe

Adjustable Slide-Lock Rail

WX150Tactical LED Illuminator

The WX150 is a ruggedly built LED weapon light

featuring a hard-coat anodized aluminum body that

is designed to t existing M3 holsters. It delivers a

powerful 150 lumens of stunning white light and ispowered by two 123 lithium batteries giving it over

two (2) hours of run time.

The WX150 easily mounts to most pistol rails, usingInsights patented Adjustable Slide-Lock interface.

The true independent, ambidextrous rocker switch

removable backplate gives the operator the choice

of Momentary On, Constant On or a blinding Strobe.Toggle either sides switch down for Momentary or

double tap down for Strobe. Locking either side up

will put the unit into the Constant On mode. The unit

can be locked into a Constant Strobe by tapping down

once and quickly locking the switch upwards.

FeaturesMultiple Modes: Constant On, Momentary On, Strobe Adjustable Rail-Interface Fits Most Standard Rails Fits In Existing M3 Holsters Hard-Coat Anodized Aluminum Construction Limited Lifetime Warranty

WX150 SpecicationsPeak LED Output 150 LumensRun Time 125 MinutesInterface Options Adjustable Slide-LockWeight 4.0 oz. w/BatteriesDimensions 3.2L x 1.6W x 1.5HWaterproofto 1 Meter/3 FeetLithium Battery Power6 volts from two (123)

Part #:WX150



14/24

M6X (Long Gun

M2 UT

M3

M3X (Long Gun

M6

M3X (Pistol)

M3X SpecicationsPeak Output 125+ LumensRun Time 60 MinutesInterface Options MIL-STD-1913, Universal, or Rail-Grabber

Part # (Pistol):

M3X-000-A3 (1913)M3X-000-A8 (Universal)M3X-000-A13 (Rail-Grabber)M3X-000-A25 (1913 Tan and Black)

Part # (Long Gun):M3X-000-A1 (1913)M3X-000-A15 (Rail-Grabber)M3X-000-A23 (1913 Tan w/Push-Button Backplate)

M6X SpecicationsPeak Output 125+ LumensVisible LaserClass IIIa, Red/Range 200MRun Time 60 MinutesInterface Options MIL-STD-1913, Universal, or Rail-Grabber

Part # (Pistol):M6X-000-A3 (1913)M6X-000-A8 (Universal)M6X-000-A13 (Rail-Grabber)

Part # (Long Gun):M6X-000-A1 (1913)M6X-000-A15 (Rail-Grabber)

M3 SpecicationsPeak Output 90+ LumensRun Time 60 MinutesInterface Options Patented Universal Slide-Lock

Part #:GLL-001-A1GLL-001-A5 (Tan)

M6 SpecicationsPeak Output 90+ LumensVisible LaserClass IIIa, Red/Range 200M

Run Time 60 MinutesInterface Options Patented Universal Slide-Lock

Part #:TLI-000-A1TLI-000-A3 (Tan)

X2 SpecicationsPeak Output 40+ LumensRun Time 30 MinutesInterface Options Patented Sub-Compact Slide-Lock

Part #:MTV-000-A1

X2L SpecicationsPeak Output 40+ LumensVisible LaserClass IIIa, Red/Range 200M

Run Time 30 MinutesInterface Options Patented Sub-Compact Slide-LockPart #:

MTV-100-A1

M2 UTL SpecicationsPeak Output 90+ LumensRun Time 60 MinutesInterface Options Designed To Fit The HK USP SeriesPart #:

HKL-000-A5

M6X (Pistol)

X2 & X2

Xenon Tactical Illuminators

Far from obsolete, Incandescent Xenon Illuminators represent the height of battle proven technology. Multiple rail mount and backplate options,

integrated Shock Suppression Systems,untold hours of testing, and solid eld experience make these weapon-mounted illuminators best in class.



15/24

LED vs. IncandescentLEDs, or Light Emitting Diodes, have several advantages over incandescent bulbs. LEDs not onlydeliver increased lumen output, the circuitry managing the LED maintains that higher output over

the course of the batterys life. The hardened construction of the LED also provides a much longer

unit life than incandescent bulbs. This is particularly important when the light is mounted on a

rearm and subjected to the extremes of weapon shock. Finally, the LED is far more efcient in howit consumes battery power. Despite its increased lumen output the LED extends the battery run time

signicantly. In the case of the X2/X2L, M3/M6 and M3X/M6X, that run time is doubled.

LED Upgrade Bezels

M3X/M6X LED BezelTurn your M3X or M6X into a 150 lumenpowerhouse with the Insight Technology

replacement LED bezel. Not only will you increase

run time to 120 minutes, but the new bezels also

t existing ip and bikini caps for the M3X andM6X. Best of all you wont have to change your

existing weapon light capable holster.

Part #:M3X-750-A1

X2/X2L LED BezelInsights industry leading compact weapon lightjust got better with the new replacement LED

bezel. Within minutes, and without the need

for tools, you can take your X2 or X2L from 40

lumens to 80 lumens and increase dependablerun time to 60 minutes.

Part #:MTV-750-A1

M3/M6 LED BezelThe M3/M6 replacement LED bezel gives you 125lumens of blinding light and up to 120 minutes

of run time, all without requiring a change in

holster. Supercharge your M3 or M6 with the easy

to install replacement LED bezel.

Part #:GLL-750-A1

A Simple Upgrade Path

Upgrading your existing Insight weapon light to a high-power, long lastingLED is quick and easy requiring no special tools. Simply unscrew your existinglights bezel and remove the Xenon bulb. Take the replacement LED element

from its package and drop it in; then screw on the LED replacement bezel.

Make sure not to damage the O-ring seal on your weapon l ight. See your

owners manual for additional maintenance instructions.

1WWW.INSIGHTTECHNOLOGY.COM


16/24

Contoured

Pistol Remotes

X-Series AccessoriesCFL-150 . . . . . . . . Pistol Backplate (available for several models-not shownCFL-170 . . . . . . . . Long Gun Backplate (remote sold separately-not shown)CFL-400 . . . . . . . . Contoured Pistol Remotes (available for several models

Long Gun Remotes(Single Button Remotes are available in 6, 12, 18, 24, 31)C F L - 3 1 0 . . . . . . . . . Coiled Single Button RemoteCFL-053-4 . . . . . . . Black 4 Single Button RemoteITP-053T-4. . . . . . . Tan 4 Single Button RemoteRMT-400-A7 . . . . . . Dual Button Remote, Jaw MountRMT-400-A8 . . . . . . Dual Button Remote, Jaw Mount (tan)

Flip Cap FilterCFL-210-A2 . . . . . . RedCFL-210-A3 . . . . . . Opaque

Bikini Filter(not shown)CFL-180-A2 . . . . . . RedCFL-180-A3 . . . . . . Opaque

M-Series AccessoriesCFL-050-425 . . . . . Pistol Remote (for M3 & M6-not shown)CFL-200 . . . . . . . . Coiled Remote (for M3 & M6)CFL-033 . . . . . . . . Pattern Generators (set of 3 for M6 only-not shown)

M2 UTL AccessoriesCFL-100 . . . . . . . . Plug Style Remote (not shown)

Weapon-Mounted Illuminator Accessories

X-Series Coiled Remote Flip Cap

Filters

Dual Button Remote

M-Series

Coiled

Remote

Long Gun Remote

For more accessories call your Insight Technology Sales Representative (866-509-2040) or visit us online.



17/24

HX-Series: Hand-held Tactical Lights

The X-Treme Series is the ashlight redened. Constructed from durable hard-coat anodized aluminum, an X-Treme Series light and its incredibly bright

LED offer a dependable tactical advantage. Advanced circuitry delivers uncompromising functionality with features such as programmable light intensity

levels, a blinding strobe, life-saving S.O.S. beacon and more, all instantly accessible from an easy to use multi-function tail cap switch.

Part #:HX120HX150HX150RHX200

Specications:

MODEL HX120 HX150 HX150R HX200

Part # HX120 HX150 HX150R HX200

Light Source Cree High Intensity LED

LED Output 120 Lumens 150 Lumens 150 Lumens 200 Lumens

Run Time (High/Low) 90 Min/100 Hrs 2 Hrs High/300 Hrs Low 3 Hrs High/300 Hrs Low 2 Hrs High/300 Hrs Low

Waterproof 5 Meters for 5 Minutes

Weight 5.0 oz w/Battery 6.5 oz w/Batteries 6.5 oz w/Battery 8.0 oz w/Batteries

Dimensions 1.3 Head1 Body

4.5 Long

1.3 Head1 Body

5.9 Long

1.3 Head1 Body

5.9 Long

1.6 Head30mm Body

7.5 Long

Lithium Battery Power (1) 123 (2) 123 Li-ion 3.7v Rechargeable (3) 123

Cree is a registered trademarks of Cree, Inc.

SIMPLE PROGRAMMABLE

ALL-IN-ONE

PUSH BUTTON TAIL CAP

Activation Button

Auto Off

Constant

Momentary

Strobe

Dim

S.O.S.



18/24

MRDSMini Red-Dot Sight*

Built to Rugged Military Specs the Mini Red Dot Sight (MRDS) was designed to aid

rapid target acquisition at close combat distances. Its small footprint, low powerconsumption, and adjustability make it a force multiplier in tight quarters. Auto dot

intensity and a manual dot intensity adjustment with 4 brightness levels provide high

visibility in all lighting conditions for a lightning fast sight picture.

The MRDS features vastly improved ease of operation over its competitors with

capabilities such as a top loading battery compartment that allows change-out withoutthe need for sight removal or loss of zero. It is also waterproof to 66 feet as well as

tested to the environmental extremes of the 810G MIL-STD. The positive click adjustersprovide 1 MOA per click windage and elevation correction ensuring quick and accurate

sight alignment without the guess work.

The Mini Red Dot Sight supports a variety of mounting options giving the shooter theability to use it as either a primary sight or as part of a complete targeting system

in conjunction with long distance optics. The MRDS, built for tactical superiority,

Built for Battle

AIMING DOT OPTIONS

* This commodity is subject to the Export Administration Regulations (15 CFR 730-744).ECCN Number 0A987, U.S. Department of Commerce authorization may be required totransfer this commodity to foreign persons.

MRDS shown mounted on CNVD-T

Doctor is a registered Trademark of Docter Optics GmbH

3.5 MOA 7.0 MOA

SPECIFICATIONS

Aiming Dot: . . . . . . . . . . 3.5 MOA or 7.0 MOADot Intensity: . . . . . . . . Auto Adjust or Manual w/4 SettingRun Time: . . . . . . . . . . . Up To 1 YearRun Time on High 1: . . . . 36 Hours (1.6mA)Run Time on High 2: . . . . 250 Hours (0.433mA)Run Time on Low 1: . . . . 3250+ Hours (0.04mA)Interface Options: . . . . . Fits Existing Docter Sight MountsDimensions: . . . . . . . . . . 1.9L x 1.1W x 1.2HWeight: . . . . . . . . . . . . . 0.85 oz. w/BatteryWaterproof: . . . . . . . . . . To 66 Feet & Meets 810G MIL-STDLithium Battery Power: . . (1) 1632 BatteryWarranty: . . . . . . . . . . . Limited Lifetime Warranty

Part #:MRD-000-A2 (Tan 3.5 MOA Dot)

MRD-000-A4 (Tan 7.0 MOA Dot)

MRD-000-A1 (Black 3.5 MOA Dot)MRD-000-A3 (Black 7.0 MOA Dot)

(Additional mounting and kit options are available. Contact yourInsight Technology Sales Representative for more information.)



19/24

LBSLaser Borelight System (AN/PEM-1)*

Insights Laser Borelight System provides a fast and exceptionally precise method

for zeroing any aiming laser, day optic, iron sight, and thermal imaging sight to

the host weapon without ever having to re a round. The LBS can be used with

any weapon-sight combination using naked eyes, direct view optics or a nightvision device.

Mandrels available for 5.56mm, 7.62mm, 9mm, .338 cal., .50 cal, 40mm, etc.

Specications:Dimensions: . . . . . . . 3.8 L x 1.25 W x 2.3 HWeight: . . . . . . . . . . 4.1 oz. w/BatteryBattery Type: . . . . . . (1) AA alkalineBattery Life: . . . . . . 8 hours

Visible LaserOutput Power: . . . . . 0.9 mW (Class II)Beam Divergence: . . . 0.5 mradWavelength: . . . . . . 650 nm (nominal)

Part #:LBS-300C (Laser Borelight System)

LBS-070 (5.56mm Mandrel)LBS-071 (7.62mm Mandrel)

LBS-075 (9mm Mandrel)LBS-172 (.338 Cal. Mandrel)LBS-079 (.50 Cal. Mandrel)LBS-135-A1 (40mm Mandrel)Other calibers are available.Contact your Insight Sales Representative for more information.

WindageAdjustment

ElevationAdjustment

Mandrel

LaserDesignator

BatteryCompartment

PowerSwitch

FrontBack


PEAK POWER

0.9mW

WAVELENGTH

650nm

CLASS II LASER PRODUCT

DANGER

* This Product is controlled forexport. Please see Back Cover formore information. Included with Laser Borelight System



20/24

Fit Chart

GunManufacturer LG/P Gun Model Comment

M2(UTL) M3 M6 X2/X2L M3X M6X XTI/WX150

Benelli LG Shotguns CFL-900 and ext. mag tube A8/A15 A8/A15

Beretta LG CX4 Storm A1/A15 A1/A15

P PX4 Storm A13 A13

LG RX4 Storm A1/A15 A1/A15

P 92/96 models Adapter Required

A8 A8

P Vertec A8 A8

P 90-TWO A8 A8

P PX4 Sub-Compact

P M9-A1 A8 A8

Browning P PRO-9 A8 A8

P 92G SD A8 A8

Caspian Arms P Recon Rail Receiver A8 A8

Colt LG M4 1913/Picatinny Rails A1/A15 A1/A15

LG AR-15 1913/Picatinny Rails A1/A15 A1/A15

CZ P 75 P-01 A8 A8

FN LG P90-Tri-rail A1/A15 A1/A15

LG Scar A1/A15 A1/A15

P Five-SeveN A8 A8

P FNP 9, 40, 45 A8 A8

Glock P 17, 19, 20, 21, 22, 23, 25,31, 32, 34, 35, 37, 38

A8 A8

P 30 w/Rail

H&K LG MP5 Weaver or 1913/Picatinny A15 A15

P USP, Compact/Full

P P2000 A8 A8

P P2000SK

P P30 A8 A8

P HK45 A8 A8

LG HK416 A1/A15 A1/A15

LG HK417 A1/A15 A1/A15

LG UMP A1/A15 A1/A15

LG MP7 A1/A15 A1/A15

LG G36 A1/A15 A1/A15

P HK45C

Kel-Tec P PF-9

Kimber P TLE/RL II A8 A8

P Warrior A8 A8

P SIS Custom/RL

A8 A8

P Gold Combat RL II A8 A8

P PRO TLE/RLII A8 A8

Mossberg LG 930 SPX/500/590 CFL-900 and Ext. Mag Tube A8/A15 A8/A15

Para Ordnance P Nite Tac A8 A8

P Lite Hawg

Remington LG 870/1100 CFL-900 and Ext. Mag Tube A8/A15 A8/A15

Specications Subject To Change Without Notice



21/24

Product specications in this publication are based on extensive laboratory testing. Real world performance values may differ based

on usage variables such as battery condition, prolonged battery storage, temperature, and/or number of discharge cycles in the case

of rechargeable models. Specications are subject to change without notice.

Fit Chart

GunManufacturer LG/P Gun Model Comment

M2(UTL) M3 M6 X2/X2L M3X M6X XTI/WX150

Ruger P P345 A8 A8

P P90 A8 A8

P P95 A8 A8

P SR9 A8 A8

SIG SAUER P P220 Combat A3 A3

P P220 CFL-220-A-1 A8 A8

P P226 CFL-226-A-1 A8 A8

P P228/P229 CFL-228-A1 A8 A8

P P250 A8 A8

P GSR/Revolution/1911 A3 A3

P P220R A3 A3

P P226R A3 A3

P P229R A3 A3

P SP2022 A3 A3

LG 556 A1/A15 A1/A15

P Mosquito A8 A8

Smith & Wesson P SW99 M5 (Discontinued)

P TSW models M5 (Discontinued)

P M&P A3 A3

LG M&P 15T A1/A15 A1/A15

P Sigma M4 (Discontinued)

P 327 M&P R8 A3 A3

P M&P Compact

Springeld A rmory P XD45/Compact/Service/Tactical A8 A8

P XD Sub-Compact

P Operator Series A3/A13 A3/A13

P TRP Light Rail A3/A13 A3/A13

LG Loaded M1A A1/A15 A1/A15

LG Socom II A1/A15 A1/A15

P Loaded Micro Compact

Steyr P M-A1 A8 A8

STI International P Off Duty

P Tactical Models A8 A8

Strayer-Voigt, Inc. P Innity w/factory rails A8 A8

Taurus P 24/7 A8 A8

P PT609

P PT909 A8 A8

P PT1911 w/Rails A8 A8

P PT99 A8 A8

Walther P PPS

Wilson Combat P CQB w/Rail A8 A8

Specications Subject To Change Without Notice



22/24

Limited 12 Month Warranty(Electro-Optical Sights and Aiming Devices)

Insight Technology Incorporated warrants for 12 months after purchase that its productswill be free from defects in material and workmanship. At its sole discretion, InsightTechnology Incorporated will either repair or replace, at no charge, any product or part(with the exception of the lamp and battery) which is found to be defective under normaluse and service. Insight Technology Incorporateds obligation to either repair or replaceshall be the purchasers sole and exclusive remedy under this warranty. The warranty doesnot cover battery leakage. The battery manufacturer should be contacted in the event ofa leak.

This warranty extends only to the original owner. There are no warranties, expressed orimplied, other than as set forth on this page, and Insight Technology Incorporated disclaims

any warranties of merchantability or tness for a particular purpose. Insight TechnologyIncorporated shall not be liable for incidental, consequential, or special damages arisingout of or in connection with product use or performance. For service, repair, or replacement,return unit UPS Prepaid with a copy of the sales receipt to Insight Technology Incorporated.

Limited Lifetime Warranty(Weapon-Mounted Tactical Illuminators, MRDS, & Hand-held Tactical LED Lights)

Insight Technology Incorporated warrants its white light products be free from defects inworkmanship and in materials for the life of the product. This lifetime warranty covers theproduct but excludes the batteries, bulbs, and accessories.

At its sole discretion, Insight Technology shall either repair or replace any product or part

(batteries, bulbs, and accessories not included), which is found to be defective under normaluse and service. Insights obligation to either repair or replace shall be the purchasers soleand exclusive remedy under this warranty. Damage from batteries is not covered. Carefullyfollow maintenance instructions to prevent battery damage from occurring.

There are no other warranties, expressed or implied, other than as set forth on this page, andInsight Technology disclaims any warranties of merchantability or tness for a particular purpose.Insight Technology shall not be liable for incidental, consequential, or special damages arisingout of or in connection with product use or performance. For service, repair or replacement,call Insight Customer Service at 1-866-509-2040 for an RMA number, and ship UPS prepaid.

Extended Warranty

For information about extended warranty options and pricing, please contact your InsightTechnology sales representative.

Warranty Information



23/24

Product Demonstrations and T&E SamplesInsight Technologys professional Law Enforcement sales staff and trainers are available to

schedule product demonstrations and training. Your agency can also request products for test

and evaluation by your own department personnel. Simply contact Insight Technology via e-mail

at Law [email protected] or call toll free (866) 509-2040.

Grant Writing AssistanceInsight Technology offers its Law Enforcement and public safety customers assistance with thegrant writing process. Through the grant writing support effort, Insight will help departments

and agencies navigate the grant process to nd available funding as well as assist with the

actual grant writing process. Law enforcement agencies interested in grant writing assistance

should contact Insight Technology via e-mail at [email protected].

IR Laser ProductsSales of IR laser products to non-DoD Personnel by Insight Technology are restricted by the FDA to: Law Enforcement Agencies (State, Local, Municipal)

Federal Agencies Qualied Third Party Agents

Contact Insight Technology for details.

Export NoticeInsight Technology products are controlled for export purposes under the International Trafc in ArmsRegulations (22 C.F.R. Chapter 1, Subchapter M, Parts 120-130) and the Export Administration Regulations

(15 C.F.R., Parts 730-744), and require U.S. Government authorization prior to the export or transfer to anon-U.S. Person. Contact Insight Technology for details.


Toll Free: 866-509-2040

Fax: 603-668-1084

www.InsightTechnology.com

Your Department Deserves The Best.Insight Can Help You Get It.


24/24

Insight, the Eye logo, the Stylized X, Slide-Lock, Ultra VOxand Dominate the Darkness are Registered Trademarks. X2, X2L,

Rail-Grabber, and Built for Battle are Trademarks ofInsight Technology, Inc.

One or more of these products may be covered by one or more of thefollowing U.S. Patents: 5,374,986; 5,400,540; 5,430,967; 6,185,854;

6,190,025; 6,574,901 and D522,031.

Specications subject to change without notice.

2009 Insight Technology Incorporated


Toll Free: 866-509-2040Fax: 603-668-1084

www InsightTechnology com

Date post:	06-Apr-2018
Category:	Documents
Upload:	mario-lopez
View:	255 times
Download:	8 times

2010 Insight Optics LE Catalog

Documents