10/7/2010 LIST PRICE SALE PRICEMPD Aluminum U-Joint assembly 250.00$ 75.00$

U-Joint #6420 19 races since new 5 on new crossU-Joint #6421 11 races since new 9 on new crossU-Joint #6424 14 races since new U-Joint #6875 New style Thicker Yoke 20 races since newU-Joint #6876 New style 2 races since new crashed 50.00$

MPD Torque Ball (Out Side Ball) 150.00$ 75.00$ MPD Left front Aluminum rotor 60.00$ 30.00$ MPD Torque ball housing machined down to line up pivot points 200.00$ 65.00$ MPD Steering arms Left combo and right (set) 3 1/4" bolt center 95.00$ 50.00$ Maxim 52" and 53" Axles 190.00$ 125.00$ Aero-Dynamics steering arms left combo & RH (set) 3 3/4" B/C 100.00$ 25.00$ Wilwood LF/RR Brake caliper 90.00$ 55.00$ Wilwood Inboard caliper Dynalite W/ Radial mount for .810 rotor 250.00$ 120.00$ Wilwood Billet 3 1/2" bolt spacing inboard caliper set up for 1.250" rotor 187.00$ 90.00$ Wilwood Billet pavement front caliper 5 1/4" bolt spacing set up for 1.250" rotor 187.00$ 90.00$ Wilwood brake hats 2" offset 6x5"bc for studs 8x7.625" for rotor 100.00$ 45.00$ Wilwood 1.25" HD front brake rotors curved vane pair (PN160-3872) 180.00$ 90.00$ Weld Direct Mount Hubs Ultra light w/ bearings pair 430.00$ 230.00$ Zemco Headers 2" primaries with turbo clamps welded on Chevy 400.00$ 150.00$ Winters rear ends 4.11:1 w/ 52:1 long spline axle internal coupler 1,870.00$ 1,000.00$ Winters spindles 3 1/4" bolt center Ti spud straight shaft 175.00$ 100.00$ Shadow Bar Jacker 1 3/4" bar split 350.00$ 175.00$ Shadow weight jacker 2.900" ID 3" collapsed 4" extended 325.00$ 162.50$ Gaerte cast aluminum rocker arm covers for Chevy w/ cross over tube 200.00$ 75.00$ Gaerte fabricated rocker arm covers for Chevy LH breather 300.00$ 150.00$ Dash mount PS reservoir 9"x5"x2" 70.00$ 30.00$ Beast front Axles 50" and 52" 265.00$ 150.00$ Sanders pavement front brake rotor hats new or like new 80.00$ 40.00$ Red Devil Steel brake rotors used on pavement car .810"x12" 8x7.625" BC 495.00$ 275.00$ Beast radiator by Saldana lay down type no cap measures 18 1/4"x16 1/2"x2" 335.00$ 170.00$ Beast radiator by saldana lay down type no cap measures 20 3/4"x20"x2" 335.00$ 170.00$ Fluidyne radiator stand up no cap 20"x13 1/2"x2" 2-1/2"NPT top 1-1/2" NPT bottom 300.00$ 125.00$ Fluidyne radiator stand up no cap 22"x14"x1/2" 2- 1/2"NPT top 1- 1/2" NPT bottom 300.00$ 125.00$ XYZ bird cages wing and non-wing pickups with dual row bearings (pr) 500.00$ 325.00$ Tilton onboard starter 10 tooth bolt in style for Silver Crown car 685.00$ 340.00$ Tilton onboard starter 9 tooth pinch clamp style for Silver Crown car 685.00$ 340.00$ Tilton Billet output housing 4.25" ball 1,200.00$ 600.00$ Tilton Cast output housing 4.25" ball 1,200.00$ 500.00$ Tilton 74 tooth flywheel 525.00$ 260.00$ Tilton 5 1/2" OT-III Clutch 775.00$ 387.50$ Tilton power steering mount for Chevy mount PS pump to bell housing 200.00$ 100.00$ Tilton 26 spline steel yoke shaft 650.00$ 500.00$ Tilton Release bearings 120.00$ 60.00$ Tilton Clutch Cover assembly with pressure plate and 2 floaters fresh from Tilton 500.00$ 250.00$ Wilwood 60˚ brake mount & balance bar assembly w/ 1" & 7/8" master cylinders 320.00$ 150.00$

We now proudly accept

(513) 697-9537 Hoffman Auto Racing Sale List (513) 697-9537

Quantity LIST PRICE SALE PRICE

4 15X18X5 OBL 550.00$ 250.00$ 4 15X18X5 OBLw/CVR 550.00$ 250.00$

2 15X17X3 OBLw/CVR 540.00$ 325.00$ 4 15X17X5 OBLw/CVR 540.00$ 325.00$

Our 17 inch wheels were only ran one or two times and are just like newone is new in box, and one is new out of box

2 15X16X3 OBLw/CVR 530.00$ 225.00$ 1 15X16X5 OBLw/CVR 530.00$ 225.00$

4 15X14X5 OBL 480.00$ 270.00$ 6 15X14X6 OBL 480.00$ 270.00$ 1 15X14X6 DBL 610.00$ 300.00$ 4 15X15X6 DBL 610.00$ 325.00$

2 15X8X4 OBLw/CVR 340.00$ 150.00$ 3 15X8X3 OBLw/CVR 340.00$ 150.00$ 4 15X8X3 No Lock 220.00$ 100.00$ 2 15X8X3 No Lock w/CVR 284.00$

2 15X8X4 No Lock 345.00$ 125.00$ 5 15X10X5 No Lock 380.00$ 125.00$ 2 15X10X7 New never ran No Lock 360.00$ 230.00$

50

DBL=Double bead lockIBL = Inner bead lockOBL = Outer bead lockOBLw/CVR = Outer bead lock with coverCenter Lock uses single center nut with no need for pressure plate

15 X 18 X 5

Diameter Width Offset

15" Front 6 pin XL wheels

17" Wide Wheels

16" Wide Wheels

Left rear wheels

15" Direct mount front wheels

Weld Wheels 15" Magnum sprint spline rears

10/6/2010

18" Wide Wheels

Mopar W9-RP built by Stanton maintained by Gaerte. 14 races since new 0 races since freshEngler 2 13/16" injectors, ATI super damper, Mopar water pump, Barnes oil pump, JE pistons, MSD ignition Dyno sheets upon request

Very strong and reliable motor. Over $40,000 new Exceptional price at $17,500

Silver Crown open 360 engine

10/7/2010

Used Cars 2005 F-5 Many feature wins makes this car one of the best producers we have ever had.

In just two races this car won over $55,000! Jerry won $30k in this car at Oskaloosaand a few weeks later Tracy won $25,000 at Eldora with it. Consistently fastThe car has many feature wins and a few track records. The car comes with carbon fiber left side body panels.

Frame and Body: $1250 Basic Kit: $1700 Deluxe Kit: $2700 Roller:$9,500

2010 Big Max Maxim 12 races since new87/40 standard tube car. Safety cage LH and Safety bar RH. Never crashedNever powder coated 12 races since new.

Frame and Body: $3300 Basic Kit: $3750 Deluxe Kit: $4800 Roller:$11,500

Beast Pavement Sprint car Multiple track records and too many feature wins to list. This car performs every time out.Car driven by Hines, Steele, Tyler, Armstrong, Pierce, Jessup, Bliss and maybe a few more!

Frame and body: $3000 Basic Kit: $4000 Deluxe Kit: $5000 Roller: $12,500

Frame and body Cowl, Radiator box, left and right side panels, left and right rear panels, hood, arm guard, right and left front panels, nose, right side header panel, floor pan, and Dzus buttons

Basic kit Frame and body parts plus Front Axle, Front and rear bumpers, Left and right nerf bars, rear motor plateand rear radius rod plates*.

Deluxe kitAll parts listed above plus Anti-roll bar arms, links, and stop, Rear torsion arms, torsion stops Torsion bars, Torsion bar bushings, 3 Steel rod ends, 14 Aluminum rod ends, pan hard bar, 3 front radius rods, 2 rear radius rods, tie rod, drag link, Bird cages complete, Jacobs ladder W/ strapsUpper steering gear bracket, Pitman arm, Brake pedal and master cylinder, brake return spring Pan hard bar clamp,

RollerAll parts listed above plus Tail tank and bladder, Rear end, drive shaft, torque tube, torque ball, Torque ballhousing/retainer, KSE Gen2 steering gear, KSE power steering pump, PS pump mount, steering wheel, water temp. & oil press. gauges, Spindles, Spindle shim kit, Weld front hubs, kingpins, shifter cable and shifter, Radiator, front and rear brake calipers, front and rear brake rotors, LF brake caliper mount, brake pads, 4 shocks, 2 coil springs*, rear axle nuts and spacers, 4 wheels, Steering arms, hard brake lines, flex brake lines,

* On the Maxim front torsion bar parts and rear radius rod parts will be substituted appropriately

Frame and Body: Beast chassis, nose, hood, sun visor, dash, front scoop w/ inlet, right and left arm guard,left and right upper triangle, left and right lower flare, left and right axle enclosure, left and rightengine panel, two left and two right cockpit panels, radiator bridge, Dzus buttons

Basic Kit:All parts above and MPD shifter and cable, Front Axle, Front and rear bumper, left and right nerfs, Rear motor plate (mag), Stock Beast rear arms and ARB Kit (ARB bar and arms),

Deluxe kit: All parts above and 4 steel rod ends, 18 aluminum rod ends, aluminum front pan hard bar, 2 pan hardchassis clamps, Beast rear pan hard bar, 4 front radius rods, 2 rear radius rods, Steel drag link, Steel tie rod, Beast bird cages w/bearings, Upper steering gear bracket, pitman arm, throttle pedal, Brake pedal, 2 brake master cylinders, Wilwood 60˚ brake cylinder mount and balance bar assembly

Roller:All parts listed above and MPD torque ball housing, MPD torque ball, MPD torque tube, Steel drive shaft and 10-10 coupler, front brake caliper mounts, front brake calipers, Front brake rotors, Titanium king pins, MPD steering arms, MPD titanium spindles, Spindle shim kit, MPD 6 pin front hubs, Winters rear end, water temp and oil pressure gauges, radiator, KSE right hand steering box, KSE pump, Steering wheel, PS pump mount, PS fluid reservoir, Steel inboard brake rotor and clamp, Wilwood inboardbrake caliper and mount, Front brake rotors, Front brake rotor hats, hard brake lines, flex brake lines, Tail tank and bladder, Left and right wheel nuts, wheel spacers, Pro adjustable shocks with spring kits,4 coil springs, 4 Weld wheels,

Revcon rear arms also available.

Öhlins makes the most dependable, fade free shock available! If you speak to anyone who servicesvarious brands of shocks they will all tell you one thing, when it comes to quality, dependability, and repeatability Öhlins is the best.

Öhlins shocks STJ 19600 6" threaded body and STJ 23800 8" Threaded body

STJ 19600 6" stroke great for pavement sprint cars List Sell4 Cockpit adjustable with base valves installed includes spring kit 700$ 350$

Set of 4 2,800$ 1,250$

4 adjustable with base valves installed include spring kit 625$ 300$ Set of 4 2,500$ 1,150$

STJ 23800 8" stroke for dirt sprint car these have been run only a handful of times4 adjustable shocks with spring kit included 525$ 300$

Set of 4 2,100$ 1,150$

Öhlins rebuild kit, parts and tools

Kit includes "X" stack book, hundreds of shims (many new) ring shims, 25 pistons including MXMX high frequency, and standard. Spare piston bands, spare floating pistons, spare shafts, bleed screws, O-rings. Wrench for taking shocks apart, fill gauge, custom storage box.

Over $2000 1,000$

7500 Series Penske shocks

9" Threaded body shocks with 2.5" Coil over kitList Sell

2 5/6-3 Rebound Cockpit adjustable 580$ 350$ 1 5/2-4 Rebound Cockpit adjustable 580$ 350$ 1 5/1-3 Rebound Cockpit adjustable 580$ 350$ 2 5/0 Non adjustable 350$ 250$

9" Smooth body shocks List Sell

2 4-6/5 Compression cockpit adjustable 500$ 350$ 2 4/3-9 Rebound cockpit adjustable 500$ 350$

7" Threaded body shocks

8 Pavement sprint car cockpit adjustable shocks various valvings with 2.5" spring kitList $580 Sell $350 ea. Set of 4 $1300

Rebuild Kit A-E shims(90% are new) kit with O-rings, one wrench, one pressure gauge, one overflow ring everything needed to rebuild Penske shocks

List $350 Sell $300