30.0000˚
3.2500
Ø1.9690
Ø11.73205.0000˚R0.0625
0.2000
0.0620
R0.0625
General Saw11.732 X 80th
1.0000
WOODWORKING CATALOG
General Saw Corporation
2518 Andalusia Blvd.
Cape Coral, FL 33909
T: 800-772-3691
F: 239-574-5328
www.generalsaw.com
2010
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Index
Since 1938, General Saw Corporation has been custom manufacturing industrial quality carbide tipped saw blades for customers from every facet of the woodworking industry imaginable. Our detailed knowledge of both materials and cutting technologies has made General Saw Corporation the saw blade manu-facturer of choice among craftsmen, fabricators and manufacturers alike.
For nearly seventy years, our roots have remained deeply entrenched in the old world style of making saw blades, here in the U.S.A.. Sure, technology has made us more nimble, but the age old techniques that we built our success on are still practiced today at General Saw.
This ageless craftsmanship is evident in every saw blade General Saw manufactures ... From the hand-tensioned steel body, that guarantees the straightest cut, to the unmatched degree of sharpness that o�ers a better, longer lasting, cutting edge. Every aspect of the saw blade’s design are carefully engineered to guarantee you the best cutting woodworking blade available anywhere.
When results really matter, you’ll find that nothing performs like a well crafted tool. And, no other tool performs like the ones manufactured by General Saw. Guaranteed.
If you require a saw blade, groover, or cutter that is not shown in our catalog, please let us know. General Saw can custom manufacture your blades in any tooth count, tooth geometry, bore size, or plate thickness, in both U.S. or metric sizing up to 40 inches.
segaP elytS edalB
3-1 sedalB gniziS lenaP
5-4 sedalB gnirocS lacinoC
6 sedalB gnirocS tilpS
6 sedalB lenaP lacitreV
7 sedalB waS elbaT gnidilS
11-8 sedalB piR
Standard Rip with Chip Limiters 8
Gang Rip with Chip Limiters 8
9 piR eniL eulG
01 piR dradnatS
11 freK nihT - eniL nihT
11 piR ytuD yvaeH
Optimizing Chop Saw Blades 12
31 sedalB dniwlrihW
61-41 sedalB ffO-tuC
Standard Cut-O� with ATB 14
Standard Cut-O� with TCG 15
Standard Cut-O� with 4+1 16
71 sedalB reeneV
71 sedalB ediS mirT
81 sedalB noitanibmoC
91 sedalB seireS retfarCdooW
91 sedalB mrArevO
02 sedalB retiM dooW
12 sedalB xoB retiM
22 steS odaD
32 srevoorG
42 sedalB ssurT
i ecnanetniaM edalB
ii selytS htooT
iii smreT edalB
vi selohniP & syawyeK
v setoN
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
MAIN
Application: For cutting single or multiple sheets with horizontal beam saws with scoring.
Manufactured for high production and tight tolerance for a straight and true cut.
Carbide-tipped | TCG Top Design (ATB available upon request) | Copper Plugged Slots
SCOREMAIN
Dia.Catalog #Machine
400 mm
430 mm
530 mm
250 mm
350 mm
400 mm
400 mm
450 mm
450 mm
500 mm
500 mm
305 mm
320 mm
320 mm
355 mm
355 mm
400 mm
400 mm
400 mm
PS40072603
PS43072603
PS53060603
PS25072303
PS35072803
PS40060803
PS40072803
PS45072803
PS45072803
PS50060803
PS50072803
PS30560753
PS32072753
PS32060753
PS35560753
PS35572753
PS40060753
PS40060753
PS40072753
Teeth
72
72
60
72
72
60
72
72
72
60
72
60
72
60
60
72
60
60
72
Bore
60 mm
60 mm
60 mm
30 mm
80 mm
80 mm
80 mm
80 mm
80 mm
80 mm
80 mm
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
Kerf
4.4 mm
4.4 mm
5.8 mm
3.2 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.8 mm
4.4 mm
4.4 mm
4.6 mm
4.4 mm
4.4 mm
4.4 mm
4.8 mm
4.4 mm
Plate Pinholes
3.2 mm
3.2 mm
4.0 mm
2.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.2 mm
1/11/85
1/11/85
4/8.5/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
4/9/100, 2/14/110, 2/7/110
3/12.5/95
4/15/105
4/15/105
4/15/105
Panel Sizing Blades
Anthon LNA
Anthon CP
Anthon LNB
Casadei Linea
Gabbiani Prima
Gabbiani Class
Gabbiani Galaxy
Gabbiani Elite
Gabbiani A/10
Giben Junior
Giben Smart 75
Giben
Giben Trend
Giben Gama 2000
Continued...
15°
15°
D
45°45°
K
P
[ TCG ]
1
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Catalog #Machine Dia.
400 mm
430 mm
430 mm
470 mm
500 mm
500 mm
500 mm
500 mm
550 mm
565 mm
565 mm
350 mm
380 mm
380 mm
400 mm
420 mm
420 mm
420 mm
420 mm
450 mm
450 mm
500 mm
500 mm
500 mm
520 mm
520 mm
540 mm
540 mm
550 mm
570 mm
600 mm
600 mm
PS40072753
PS43072753
PS430100753
PS470100753
PS50060753
PS50072753
PS50060753
PS50072753
PS550721003
PS565601003
PS565721003
PS35060303
PS38060603
PS38072603
PS40072603
PS42072603
PS42072603
PS42060603
PS42072603
PS45072603
PS45072603
PS50060603
PS50072603
PS50072603
PS52060603
PS52072603
PS54060603
PS54080603
PS55060603
PS57060603
PS60060603
PS60072603
Teeth
72
72
100
100
60
72
60
72
72
60
72
60
60
72
72
72
72
60
72
72
72
60
72
72
60
72
60
80
60
60
60
72
Bore
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
75 mm
100 mm
100 mm
100 mm
30 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
60 mm
Kerf
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.8 mm
4.8 mm
5.2 mm
5.0 mm
5.0 mm
3.6 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.6 mm
4.8 mm
4.8 mm
4.4 mm
4.8 mm
4.8 mm
4.8 mm
5.0 mm
4.8 mm
4.8 mm
4.8 mm
4.8 mm
5.2 mm
5.8 mm
5.8 mm
5.8 mm
Plate Pinholes
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
2.4 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
4.0 mm
4.0 mm
4.0 mm
4.0 mm
4/15/105
4/15/105
4/15/105
4/15/105
4/15/105
4/15/105
4/15/105
4/15/105
2/10/80, 2/14/125
2/10/80, 2/14/125
2/10/80, 2/14/125
2/10/80, 2/14/125
2/10/80, 2/14/125
2/10/80, 2/14/125
2/11/115
2PH
2PH
Panel Sizing Blades
Giben Prismatic 101
Giben Prismatic 201
Giben Prismatic 301
Giben
Giben Matic
Holz-Her
Holzma
Continued...
2
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Catalog #Machine Dia.
355 mm
370 mm
400 mm
400 mm
450 mm
460 mm
460 mm
470 mm
480 mm
500 mm
530 mm
550 mm
580 mm
240 mm
305 mm
355 mm
355 mm
350 mm
300 mm
300 mm
350 mm
350 mm
400 mm
355 mm
360 mm
400 mm
430 mm
430 mm
450 mm
450 mm
450 mm
480 mm
PS35573303
PS37072303
PS40060303
PS40072303
PS45072303
PS46060303
PS46072303
PS47072303
PS48072303
PS50060303
PS53060303
PS55060403
PS58060403
PS24060303
PS30560303
PS35560303
PS35572303
PS35072143
PS30072803
PS30072803
PS35072803
PS35072803
PS40072803
PS35572803
PS36072653
PS40072803
PS43080803
PS43072803
PS45072803
PS45072803
PS45072803
PS48072803
Schelling
Scheer
SCM
SCMI
SCM Sigma 65
Sigma 65 (New)
SCM Sigma 90
Sigma 90 (New)
SCM Sigma 115
Selco EB90
Selco EB100
Selco EB, EBT
Selco
WN, WNT, WNTR,
WNA, WNAR
Teeth
72
72
60
72
72
60
72
72
72
60
60
60
60
60
60
60
72
72
72
72
72
72
72
72
72
72
80
72
72
72
72
72
Bore
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30mm
30mm
30mm
30mm
40mm
40mm
30 mm
30 mm
30 mm
30 mm
1-1/4"
80 mm
80 mm
80 mm
80 mm
80 mm
80 mm
65 mm
80 mm
80 mm
80 mm
80 mm
80 mm
80 mm
80 mm
Kerf
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
5.0 mm
5.0 mm
5.5 mm
3.2 mm
3.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.4 mm
4.6 mm
4.8 mm
4.8 m
Plate Pinholes
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
4.0 mm
2.2 mm
2.4 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
2/14/110
2/14/110
4/8.5/100, 2/14/110, 2/7/110
4/8.5/100, 2/14/110, 2/7/110
4/8.5/100, 2/14/110, 2/7/110
4/15/110, 2/9/130
4/19/120, 2/9/130
4/19/120, 2/9/130
4/19/120, 2/9/130
4/19/120, 2/9/130
4/19/120, 2/9/130
Panel Sizing Blades
3
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Dia.Catalog #Machine
180 mm
180 mm
180 mm
125 mm
160 mm
160 mm
200 mm
200 mm
160 mm
160 mm
125 mm
180 mm
200 mm
125 mm
125 mm
125 mm
125 mm
160 mm
215 mm
SSC1802820
SSC1802820
SSC1803020
SSC1252420
SSC1603655
SSC1603655
SSC2003480
SSC2003480
SSC1603655
SSC1603655
SSC1252445
SSC1803650
SSC2004450
SSC1252445
SSC1252445
SSC1252445
SSC1252445
SSC1602845
SSC2154250
Teeth
28
28
30
24
36
36
34
34
36
36
24
36
44
24
24
24
24
28
42
Bore
20 mm
20 mm
20 mm
20 mm
55 mm
55 mm
80 mm
80 mm
55 mm
55 mm
45 mm
50 mm
50 mm
45 mm
45 mm
45 mm
45 mm
45 mm
50 mm
Kerf
4.4/5.4
4.4/5.4
5.8/6.8
3.2/4.2
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.8/5.8
4.4/5.4
4.4/5.4
4.6/5.6
4.4/5.4
4.4/5.4
4.4/5.4
4.8/5.8
4.4/5.4
4.4/5.4
Plate Pinholes
3.2 mm
3.2 mm
4.0 mm
2.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3/7/66
3/7/66
3/7/66
3/7/66
3/7/66
3/7/66
3/7/66
3/11/70
3/15/80
Conical Scoring Blades
Anthon LNA
Anthon CP
Anthon LNB
Casadei Linea
Gabbiani Prima
Gabbiani Class
Gabbiani Galaxy
Gabbiani Elite
Gabbiani A/10
Giben Junior
Giben Smart 75
Giben
Giben Trend
Giben Gama 2000
Giben Prismatic 101
Giben Prismatic 201
Application: For pre-scoring laminated panels when cutting with horizontal beam saws.
Manufactured for high production and tight tolerance for a straight and true cut.
Carbide-tipped | Conical Top Design (Conical ATB Top available upon request) | Copper Plugged Slots
Continued...
[ CONICAL ]
SCORE15°
10°
D
K
P
MAIN
5°5°
4
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Dia.Catalog #Machine
215 mm
125 mm
127 mm
125 mm
180 mm
125 mm
200 mm
200 mm
200 mm
200 mm
200 mm
180 mm
200 mm
200 mm
200 mm
140 mm
200 mm
160 mm
150 mm
160 mm
200 mm
160 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
200 mm
SSC2154250
SSC1252445
SSC1272445
SSC1252445
SSC1803055
SSC12522022
SSC2003445
SSC2003445
SSC2003445
SSC2003445
SSC2003420
SSC1803420
SSC2002820
SSC2003420
SSC2003620
SSC1403216
SSC2006030
SSC1603655
SSC15024114
SSC1603655
SSC2003480
SSC1603655
SSC2003480
SSC2003480
SSC2003465
SSC2003465
SSC2003465
SSC2003465
SSC2003465
SSC2003465
Teeth
42
24
24
24
30
2x20
34
34
34
34
34
34
28
34
36
32
60
36
24
36
34
36
34
34
34
34
34
34
34
34
Bore
50 mm
45 mm
45 mm
45 mm
55 mm
22 mm
45 mm
45 mm
45 mm
45 mm
20 mm
20 mm
20 mm
20 mm
20 mm
16 mm
30 mm
55 mm
1-1/4"
55 mm
80 mm
55 mm
80 mm
80 mm
65 mm
65 mm
65 mm
65 mm
65 mm
65 mm
Kerf
4.4/5.4
4.4/5.4
4.4/5.4
4.8/5.8
5.2/6.2
2.8/3.6
4.4/5.4
4.6/5.6
4.8/5.8
5.8/6.8
4.4/5.4
4.4/5.4
4.4/5.4
5.0/6.0
5.5/6.5
3.2/4.2
3.3/4.3
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.4/5.4
4.8/5.8
Plate Pinholes
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3.5 mm
2.4 mm
3.2 mm
3.2 mm
3.2 mm
4.0 mm
3.5 mm
3.2 mm
3.2 mm
3.5 mm
4.0 mm
2.2 mm
2.4 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.5 mm
3/15/80
3/11/70
1/6/33
2/9/110
2/9/110
2/9/110
2/9/110
2/9/110
2/9/110
Conical Scoring Blades
Giben Prismatic 301
Giben
Giben Matic
Holz-Her
Holzma
Schelling
Scheer
SCM
SCMI
SCM Sigma 65
Sigma 65 (New)
SCM Sigma 90
Sigma 90 (New)
SCM Sigma 115
Selco EB90
Selco EB100
Selco EB, EBT
Selco
WN, WNT, WNTR,
WNA, WNAR
5
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Catalog # Dia. Teeth Bore Kerf
SSS1001275
SSS1201275
SSS0801020
SSS1001220
SSS1201220
SSS1001222
SSS1201222
SSS1251222
SSS1202050
100 mm
120 mm
80 mm
100 mm
120 mm
100 mm
120 mm
125 mm
120 mm
2x12
2x12
2x10
2x12
2x12
2x12
2x12
2x12
2x20
3/4"
3/4"
20 mm
20 mm
20 mm
22 mm
22 mm
22 mm
50 mm
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
2.8/3.6
Split Scoring Blades Application: For machines with scoring capabilities.
Includes shims to adjust main varying blade thicknesses.
Use for standard table saws and panel sizing machines.
Carbide-tipped | Flat Top Design | Set Pin Together
Application: For cutting a straight and true cuts on single sheets.
Use for vertical panel machines.
Carbide-tipped | TCG and ATB Top Design | Copper Plugged Slots
Catalog # ATB Dia. Teeth Bore Kerf Plate
VP08602
VP08802
VP08487* (2+1)
VP22042302
VP22064302
VP22070302
VP25060302
VP25080302
VP30080302
VP300100302
Catalog # TCG
VP08603
VP08803
N/A
VP22042303
VP22064303
VP22070303
VP25060303
VP25080303
VP30080303
VP300100303
8"
8"
8"
220 mm
220 mm
220 mm
250 mm
250 mm
300 mm
300 mm
60
80
48
42
64
70
60
80
80
100
5/8"
5/8"
5/8"
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
.110"
.125"
.125"
.115"
.115"
.115"
.120"
.120"
.130"
.130"
.080”
.091”
.091”
.081”
.081”
.081”
.086”
.086”
.095”
.095”
12°
5°
K
P
20°20°
D
12°
10°
K
PD
K
Vertical Panel Blades
6
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Sliding Table Saw BladesPanel Sizing
Application: For glue line ripping dry soft or hardwoods.
Ultra-smooth cut for gluing applications.
Use for straight line rip saws, gang saws or table saws.
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Application: For cutting single or multiple sheets with
sliding table saws with or without scoring capabilities.
Manufactured for moderate to high production and
tight tolerance for a straight and true cut everytime.
Carbide-tipped | TCG Top Design | Copper Plugged Slots
Catalog #
STP30080303
STP300100303
STP35580303
STP355100303
STP300100303
STP350100303
STP30080303-1
Dia.
300 mm
300 mm
14"
14"
300 mm
350 mm
300 mm
Teeth
80
100
80
100
100
100
80
Bore Kerf Plate
2.2
2.2
2.7
2.7
2.2
2.4
3.0
Catalog #
STP30080303
STP300100303
STP35580303
STP355100303
STP300100303
STP350100303
STP30080303-1
Dia.
300 mm
300 mm
14"
14"
300 mm
350 mm
300 mm
Teeth
80
100
80
100
100
100
80
Bore
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
Kerf
3.2
3.2
3.7
3.7
3.2
3.6
4.3
Plate
2.2
2.2
2.7
2.7
2.2
2.4
3.0
Catalog #
STP30080302
STP300100302
STP35580302
STP355100302
STP300100302
STP350100302
STP30080302
Dia.
300 mm
300 mm
14"
14"
300 mm
350 mm
300 mm
Teeth
80
100
80
100
100
100
80
Bore
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
30 mm
Kerf
3.2
3.2
3.7
3.7
3.2
3.6
4.3
Plate
2.2
2.2
2.7
2.7
2.2
2.4
3.0
15°
10°
15°
10°
K
PD
D
45°45°
K
P
10°10°
[ TCG ]
[ ATB ]
7
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Rip BladesStandard Rip Saw with Chip Limiters
Application: For ripping soft or hardwoods.
Chip limiter design to reduce kickbacks.
Use for sliding table saws and standard table saws.
Carbide-tipped | Straight Top Design | Copper Plugged Slots
Gang Rip Saw with Chip Limiters
Application: For ripping dry soft and hardwood.
Chip limiter design to reduce kickbacks.
Engineered in mm to fit European machines.
All dimensions = 2.2 mm ( .086" ) saw plate.
Multi Rip Saw Application.
Carbide-tipped | Straight Top Design | Copper Plugged Slots
Catalog #
GRCL2501
GRCL3001
GRCL3501
Dia.
250mm
300mm
350mm
Teeth
24
28
24
Bore
70mm
70mm
70mm
Kerf
.126"
.126"
.126"
Plate
.086"
.086"
.086"
Keyway
2/20/5
2/20/5
2/20/5
Catalog #
RSCL2501
Dia.
250mm
300mm
350mm
400mm
450mm
500mm
Teeth
24
30
32
36
40
48
Bore
5/8”
1”
1”
1”
1”
1”
Kerf
.126”
.134”
.150”
.150”
.160”
.184”
Plate
.086”
.094”
.110”
.110”
.118”
.126”
RSCL3001
RSCL3501
RSCL4001
RSCL4501
RSCL5001
15°
20°
K
PD
15°
20°
K
PD
8
15°
20°
K
PD
D
45°45°
K
P
10 °10 °
[ TCG ]
[ ATB ]
15°
20°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Rip BladesGlue Line Rip Saws
Application: For glue line ripping dry soft or hardwoods.
Ultra-smooth cut for gluing applications.
Use for straight line rip saws, gang saws or table saws.
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Application: For glue line ripping dry soft or hardwoods.
Ultra-smooth cut for gluing applications.
Use for table saws.
Carbide-tipped | TCG Top Design | Copper Plugged Slots
Catalog #
RSG08243
RSG09243
RSG10243
RSG12363
RSD12363
RSG123631253
RSG12363
RSG14363
RSD14363
RSG143631253
RSG1436703
RSD14403
RSG16363
Dia.
8"
9"
10"
12"
12"
12"
12"
14"
14"
14"
14"
14"
16"
Teeth
24
24
24
36
36
36
36
36
36
36
36
40
36
Bore
5/8"
5/8"
5/8"
1"
2"
3 -1/8"
70mm
1"
2"
3-1/8"
70mm
2"
1"
Kerf
.130"
.135"
.142"
.160"
.160"
.160"
.160"
.170"
.169"
.169"
.169"
.184"
.174"
Plate
.086"
.086"
.095"
.110"
.110"
.110"
.110"
.118"
.118"
.118"
.118"
.134"
.118"
Design
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
9
15°
20°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Rip BladesStandard Rip Saws
Application: For glue line ripping dry soft or hardwoods.
Ultra-smooth cut for gluing applications.
Use for straight line rip saws, gang saws or table saws.
Carbide-tipped | TCG Top Design | Copper Plugged Slots
Application: For glue line ripping dry soft or hardwoods.
Ultra-smooth cut for gluing applications.
Use for table saws.
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Catalog #
RSH08242
RSH09242
RSH10242
RSH10243
RSH12363
RSP123631253
RSP1236703
RSP14363
RSP123631253
RSP1236703
RSH16363
Dia.
8"
9"
10"
10"
12"
12"
12"
14"
14"
14"
16"
Teeth
24
24
24
24
36
36
36
36
36
36
36
Bore
5/8"
5/8"
5/8"
5/8"
1"
3 -1/8"
70mm
1"
3-1/8"
70mm
1"
Kerf
.130"
.135"
.138"
.142"
.160"
.160"
.160"
.170"
.169"
.169"
.174"
Plate
.086"
.086"
.095"
.095"
.110"
.110"
.110"
.118"
.118"
.118"
.118"
Design
ATB
ATB
ATB
TCG
TCG
TCG
TCG
TCG
TCG
TCG
TCG
K
PD
D
45°45°
K
P
10 °10 °
[ TCG ]
[ ATB ]
15°
20°
10
15°
20°
15°
20°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
K
PD
Rip BladesThin Line - Thin Kerf
Application: For ripping dry soft and hardwood.
Manufactured with a thinner kerf for material saving applications.
Use for table saws and multi-rip saw applications.
Carbide-tipped | Straight Top Design | Copper Plugged Slots
Heavy Duty RipApplication: For ripping dry soft and hardwood.
Thicker plate and kerf for more cutting stability.
Use for table saws and multi-rip saw applications.
Carbide-tipped | Straight Top Design | Copper Plugged Slots
Catalog # Dia. Teeth Bore Kerf Plate
Catalog # Dia.
10"
10"
12"
Teeth
30
30
36
Bore
5/8”
5/8”
1”
Kerf
.098”
.125"
.130"
Plate
.070”
.086"
.086"
RSTL10301-098
RSTL10301-125
RSTL12361-130
RSP10241
RSP10301
RSP12241
RSP12301
RSP14301
RSP16301
RSP16401
10"
10"
12"
12"
14"
16"
18"
24
30
24
30
30
30
40
5/8"
5/8"
1"
1"
1"
1"
1"
.160"
.160"
.170"
.170"
.170"
.184"
.184"
.110”
.110”
.118”
.118”
.118”
.134”
.134”
K
PD
11
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Optimizing Chop Saw Blades
Application: For crosscutting wood on optimizing chop saw
machines or systems.
Large number of teeth for increased cutting speeds.
Special cutting geometry for excellent cut quality.
Use for sliding table saws and standard table saws.
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Catalog #
OCS4001202
OCS4501322
OCS4801402
OCS500144302
OCS500144702
OCS5501202
Dia.
400mm
450mm
480mm
500mm
500mm
550mm
Teeth
120
132
140
144
144
156
Bore
30mm
30mm
70mm
30mm
70mm
120mm
Kerf
4.6mm
4.6mm
4.6mm
4.6mm
4.6mm
4.6mm
Plate
3.5mm
3.5mm
3.5mm
3.5mm
3.5mm
3.5mm
Machine
Dimter
GreCon
Paul
GreCon
Paul
Paul
Drive Pinhole
2/15/63
6/8/220
2/15/63
6/8/220
6/10,2/240
15°
5°
K
PD
20 °20 °
Other dimensions for Dimter, GreCon or Paul machines are available by special order.
[ATB]
12
12°
20°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
K
PD
20 °20 °
D
45°45°
K
P
[ TCG ] [ ATB ]
Catalog # Dia. Teeth Bore Kerf Plate
.109"
.120"
.120"
.155"
.165"
.165"
1"
1"
1"
100
100
108
14"
16"
18"
WW141002AF
WW161002AF
WW181002AF
Application: For cutting dry soft or hardwoods.
The high hook and High ATB top design with alternate
shear face design is ideal for chip-free cutting every time.
Use with Whirlwind Up-Cut and simular machines.
Carbide-tipped | High ATB / ASF Top Design | Laser Slots
Application: For cutting dry soft or hardwoods.
Use with Whirlwind Up-Cut
and simular machines.
Whirlwind BladesSuperblade
Economy Line
Catalog #
WW14603
WW14722
WW16603
WW16722
WW18603
WW18722
Dia.
14"
14"
16"
16"
18"
18"
Teeth
60
72
60
72
60
72
Bore
1"
1"
1"
1"
1"
1"
Kerf
.155"
.155"
.165"
.165"
.165"
.165"
Plate
.109"
.109"
.120"
.120"
.120"
.120"
Design
TCG
ATB
TCG
ATB
TCG
ATB
Carbide-tipped | TCG or ATB Top Design | Copper Plug Slots
5°
12°
24°
K
PD
24°24°
[ HI - ATB / ASF ]
12°
20°
13
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Cut-Off BladesStandard ATB
Dia.Catalog #
8”
8”
8”
8”
9”
10”
10”
10”
10”
10”
12”
12”
12”
12”
12”
12”
14”
14”
14”
14”
14”
16”
16”
16”
16”
16”
18”
18”
18”
18”
CO84002
CO84802
CO86002
CO87202
CO9602
CO10402
CO10482
CO10602
CO10722
CO10802
CO12402
CO12482
CO12602
CO12722
CO12802
CO121002
CO14402
CO14602
CO14722
CO14802
CO141002
CO16402
CO16602
CO16722
CO16802
CO161002
CO18602
CO18802
CO181002
CO181202
Teeth
40
48
60
72
60
40
48
60
72
80
40
48
60
72
80
100
40
60
72
80
100
40
60
72
80
100
60
80
100
120
Bore
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
Kerf
112"
112"
.112"
.112"
.125"
.125"
.125"
.125"
.125"
.125"
.135"
.135"
.135"
.135"
.135"
.135"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.16"
.16"
.16"
.16"
Plate
.080"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.095"
.095"
.095"
.095"
.095"
.095"
.110"
.110"
.110"
.110"
.110"
.118"
.118"
.118"
.118"
.118"
.134"
.134"
.134"
.134"
Application:
For cross cutting or trimming
soft and hardwoods, plywood,
or composite panel material.
Use for standard table saws,
sliding table saws and cut-off
saws.
14
12°
10°
K
P
10°10°
D
12°
10°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
D
45°45°
K
P
Cut-Off BladesStandard TCG
Carbide-tipped | TCG Top Design | Copper Plugged Slots
Dia.Catalog #
8”
8”
8”
8”
9”
10”
10”
10”
10”
10”
12”
12”
12”
12”
12”
12”
14”
14”
14”
14”
14”
16”
16”
16”
16”
16”
18”
18”
18”
18”
CO84003
CO84803
CO86003
CO87203
CO9603
CO10403
CO10483
CO10603
CO10723
CO10803
CO12403
CO12483
CO12603
CO12723
CO12803
CO121003
CO14403
CO14603
CO14723
CO14803
CO141003
CO16403
CO16603
CO16723
CO16803
CO161003
CO18603
CO18803
CO181003
CO181203
Teeth
40
48
60
72
60
40
48
60
72
80
40
48
60
72
80
100
40
60
72
80
100
40
60
72
80
100
60
80
100
120
Bore
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
Kerf
.112"
.112"
.112"
.112"
.125"
.125"
.125"
.125"
.125"
.125"
.135"
.135"
.135"
.135"
.135"
.135"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.16"
.16"
.16"
.16”
Plate
.080"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.087"
.095"
.095"
.095"
.095"
.095"
.095"
.110"
.110"
.110"
.110"
.110"
.118"
.118"
.118"
.118"
.118"
.134"
.134"
.134"
.134"
Application:
For cross cutting or trimming of
plastic laminated materials.
Use for standard table saws,
sliding table saws and cut-off
saws.
15
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Cut-Off Blades4 ATB + 1 Raker
Application: For cross cutting dry soft and hardwoods.
Large gullets in body allow for improved chip ejection.
Use for standard table saws, sliding table saws and cut-off saws.
Carbide-tipped | 4 ATB + 1 Raker Top Design | Copper Plugged
Dia.Catalog #
8”
8”
10”
10”
10”
12”
12”
12”
12”
14”
14”
14”
14”
16”
16”
16”
16”
18”
18”
18”
CO84005
CO86005
CO10405
CO10605
CO10805
CO12405
CO12605
CO12805
CO121005
CO14405
CO14605
CO14805
CO141005
CO16405
CO16605
CO16805
CO161005
CO18605
CO18805
CO181005
Teeth
40
60
40
60
80
40
60
80
100
40
60
80
100
40
60
80
100
60
80
100
Bore
5/8”
5/8”
5/8”
5/8”
5/8”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
Kerf
.112"
.112"
.125"
.125"
.125"
.135"
.135"
.135"
.135"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.156"
.16"
.16"
.16"
Plate
.087"
.087"
..095"
.095"
.095"
.110"
.110"
.110"
.110"
.118"
.118"
.118"
.118"
.118"
.118"
.118"
.118"
.134"
.134"
.134"
12°
10°
K
P
10°10°
D
0.25
16
12°
10°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
K
PD
20°°20
Veneer Blades
Application: For thin, hard and brittle laminates.
Manufactured with a low hook and High ATB top design
this blade dominates for the field for chip-free cutting.
Use for standard table saws and panel sizing machines.
Carbide-tipped | High ATB Top Design | Copper Plugged Slots
Application: For trim side finishing, where only one side matters.
Manufactured with a thicker plate and kerf give more stability
when cutting. Available in both right and left side trim.
Use for double end tenon machines.
Carbide-tipped | 3 + 1 (20°) ATB Top Design | Copper Plugged Slots
* For special bore size, please specify as needed.
Catalog # Dia. Teeth Bore Kerf Plate
VS109002
VS121002
VS141002
VS141202
VS161202
VS181202
VS201502
10"
12"
14"
14"
16"
18"
20"
90
100
100
120
120
120
150
5/8"
1"
1"
1"
1"
1"
1"
.125"
.135"
.145"
.145"
.160"
.175"
.175"
.085”
.095”
.105”
.105”
.120”
.134”
.134”
Catalog # Dia. Teeth Bore Kerf Plate
TS1060586 R/L
TS1280106 R/L
TS1480106 R/L
TS1410016 R/L
TS1610016 R/L
TS1612016 R/L
10"
12"
14"
14"
16"
16"
60
80
80
100
100
120
5/8"
1"
1"
1"
1"
1"
.160"
.175"
.185"
.185"
.185"
.185"
.110”
.118”
.134”
.134”
.134”
.134”
12°
5°
K
PD
30°°30
Trim Side Blades
17
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Combination BladesHi-Performance
Application: For cross cutting soft or hardwoods.
Use for sliding table saws and standard table saws.
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Combination PlanerApplication: For ripping dry soft and hardwood.
Large gullets in body allow for improved chip ejection.
Use for sliding table saws, standard table saws and chop saws.
Carbide-tipped | 4 ATB + 1 Raker Top Design | Copper Plugged Slots
Catalog # Dia. Teeth Bore Kerf Plate Sections
Catalog #
HP08487
HP10487
HP12487
Dia.
8"
10"
12"
Teeth
48
48
48
Bore
5/8”
5/8”
5/8”
Kerf
.120”
.135"
1"
Plate
.080”
.093"
.093"
15°
10°
K
PD
15°
15°
CP8405
CP9405
CP10405
CP10505
CP10550
CP12505
CP12605
CP14705
CP16805
CP18905
8"
9"
10"
10"
10"
12"
12"
14"
16"
18"
40
40
40
50
55
50
60
70
80
90
5/8"
5/8"
5/8"
5/8"
5/8"
1"
1"
1"
1"
1"
.120"
.124"
.124"
.135"
.135"
.149"
.149"
.160"
.160"
.175"
.087”
.087”
.087”
.087”
.087”
.087”
.087”
.118”
.118”
.118”
8
8
8
10
5
10
12
12
16
18
K
P
12°12°
D
0.25
10°10°
18
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
15°
5°
K
PD
15°15°
15°
15°
K
PD
15°15°
15°
5°
K
PD
15°15°
WoodCrafter Series Blades
OverArm Blades
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Catalog # Dia.
10"
12"
10"
10"
12"
Teeth
40
40
60
80
80
Bore
5/8"
1"
5/8"
5/8"
1"
Kerf
.125"
125"
.100"
.100"
.105"
Plate
.095"
.095"
.075"
.075"
.080"
Application: Ideal for cutting natural soft or hardwood.
Fast and clean cut with low power draw.
Use for radial arm machines.
Carbide-tipped | 2ATB + 1Flat Top Design | Copper Plugged Slots
[ A: TABLE SAW ] [ B: RADIAL ARM SAW]
Application: For cutting natural
soft and hardwoods.
A: Use on table saw.
B: Use on radial arm saw or
mitre box.
OA1024
OA1230
OA1436
OA1645
OA1848
OA2054
10"
12"
14"
16"
18"
20"
24
30
36
45
48
54
5/8"
1"
1"
1"
1"
1"
.135"
135"
.149"
.149"
.170"
.184"
.095"
.095"
.109"
.109"
.120"
.134"
A WMS10402
A WMS12402
B WMS10602N
B WMS10802N
B WMS12802N
Catalog # Dia. Teeth Bore Kerf Plate
19
12°
0°
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Wood Miter Blades4 ATB + 1 Raker
Application: For ripping or cross-cutting dry soft and hardwoods
and some composite materials. Manufactured to produce tight,
perfectly cut miter joints with no bottom splintering.
Use for single and double miter style machines.
Carbide-tipped | 4 ATB + 1 Raker Top Design | Laser Slots
Dia.Catalog #
9”
9”
10”
10”
11”
12”
12”
12”
12”
13”
13”
14”
14”
16”
16”
16”
16”
WM096005
WM098005
WM108005
WM101005
WM119005
WM128005
WM129005
WM121005
WM121205
WM138005
WM131005
WM141005
WM141205
WM161005
WM161205
WM161305
WM161505
Teeth
60
80
80
100
90
80
90
100
120
80
100
100
120
100
120
130
150
Bore
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
1”
1”
1”
1”
Kerf
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.125
0.125
0.13
0.13
0.13
0.13
0.13
0.13
Plate
0.085
0.085
0.095
0.095
0.095
0.095
0.095
0.095
0.095
0.1
0.1
0.105
0.105
0.105
0.105
0.105
0.105
K
P
10°10°
D
1
20
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
12 °
0°
Miter Box BladesDelta, Dewalt, Hitachi, Makita, Sawbuck, Ryobiand Simular Machines
Carbide-tipped | ATB Top Design | Copper Plugged Slots
Application: For use on single blade miter, compound miter,
sliding miter and simular chop style machines .
Manufactured for moderate to high production and tight
tolerance for a straight and true cut every time.
Carbide-tipped | TCG Top Design | Copper Plugged Slots
Catalog #
MB85603
MB10603
MB10803
MB12803
MB121003
MB14803
MB141003
MB151003
Dia.
8-1/2"
10"
10"
12"
12"
14"
14'
15"
Teeth
60
60
80
80
100
80
100
100
Bore
5/8"
5/8"
5/8"
1"
1"
1"
1"
1"
Kerf
.095"
.100"
.100"
.110"
.117"
.117"
.117"
.117"
Plate
.065"
.070"
.070"
.080"
.080"
.087"
.087"
.087"
Catalog #
MB85602
MB10602
MB10802
MB12802
MB121002
MB14802
MB141002
MB151002
Dia.
8-1/2"
10"
10"
12"
12"
14"
14'
15"
Teeth
60
60
80
80
100
80
100
100
Bore
5/8"
5/8"
5/8"
1"
1"
1"
1"
1"
Kerf
.095"
.100"
.100"
.110"
.117"
.117"
.117"
.117"
Plate
.065"
.070"
.070"
.080"
.080"
.087"
.087"
.087"
12°
0°
K
PD
D
45°45°
K
P
10 °10 °
[ TCG ]
[ ATB ]
21
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Dado SetsShear Face, Scriber Tooth Dado Sets
Dado Set Components
Application: For cutting dado grooves into dry soft and hardwoods,
composite material, melamine, partical board and MDF on standard
table saw machines.
Carbide-tipped | Flat Top-Shear Face and Scriber Tooth-Straight Face
18 T, 24 T and 40 T Shear Face Dado Sets: The Shear Face Dado Sets are General Saw's most uniquely designed
Dado Sets, rating highest for ease of cutting and lower position power
requirements. The 25 degree Shear Face design produces razor sharp
edges and flat bottom grooves in materials every time.
24 T, 38 T and 56 T Scriber Toothed Dado Sets: General Saw's Scriber Tooth Dado Sets produce precision cuts that are
perfect for laminated and veneer panels. Our 24 T Scriber Tooth design
incorporates a negative hook for chip control in even the most difficult
veneer, including red oak. With a 4 wing chipper set, available 3/32"
chipper, and shim pack, the 24 T Scriber Tooth offers incredible flexibility.
Dia. 18 - 40 TeethShear Face
24 TeethScriber
38 TeethScriber
56 TeethScriber
8”
10”
12”
14”
DS-8183
DS-10243
DS-12243
DS-14403
DS-8244N *
DS-10244N *
N/A
N/A
DS-8383
DS-10383
DS-12383
DS-14383
DS-8563
DS-10563
DS-12563
DS-14563
Bore
5/8” & 1"
5/8” & 1"
1”
1”
Dia.
2- Wing Chippers 4- Wing Chippers 1/8" Thick Outside Saws
1/16" 1/8" 1/4"
8”
10”
12”
14”
C-816
C-1016
C-1216
C-1416
C-818
C-1018
C-1218
C-1418
C-814
C-1014
C-1214
C-1414
1/16" 3/32" 1/8"
C-816-4
C-1016-4
N/A
N/A
C-8332-4
C-10332-4
N/A
N/A
C-818-4
C-1018-4
N/A
N/A
Shear Face Dado
24 Teeth Scriber
38 Teeth Scriber
56 Teeth Scriber
OS-818
OS-1024
OS-1224
OS-1424
OS-8244N
OS-10244N
N/A
N/A
OS-838
OS-1038
OS-1238
OS-1438
OS-856
OS-1056
OS-1256
OS-1456
* 1" Cutting Kerf - Four Wing Chipper Sets - Shim Pack Included
[ SHEAR-FACE ]
[ SCRIBER-TOOTH ]
22
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Groovers
Catalog # Dia.
6"
6"
6"
6"
6"
6"
6"
7"
7"
7"
7"
7"
8"
8"
8"
8"
10"
10"
10"
10"
RG06125862
RG06125832
RG06125818
RG06125836
RG06125814
RG06125856
RG06125838
RG07185832
RG07185836
RG07185814
RG07185856
RG07185838
CG08245836
CG08245814
CG08245856
CG08245838
CG10245836
CG10245814
CG10245856
CG10245838
Teeth
12
12
12
12
12
12
12
18
18
18
18
18
24
24
24
24
24
24
24
24
Bore
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
Kerf
1/16"
3/32"
1/8"
3/16"
1/4"
5/16"
3/8"
3/32"
3/16"
1/4"
5/16"
3/8"
3/16"
1/4"
5/16"
3/8"
3/16"
1/4"
5/16"
3/8"
Plate
TR /.040"
.087"/.065"
.087"
.134"
.187"
.187"
.250"
.087"/.065"
.134"
.187"
.187"
.250"
.134"
.187"
.187"
.250"
.134"
.187"
.187"
.250"
Catalog # Dia.
100
150
150
150
150
150
150
150
180
180
180
180
180
200
200
200
200
250
250
250
250
250
RG100242032
RG150123018
RG150123025
RG150123035
RG150123050
RG150123060
RG150123070
RG150123080
RG180183025
RG180183050
RG180183060
RG180183070
RG180183080
CG200243050
CG200243060
CG200243070
CG200243080
CG250243050
CG250243060
CG250243070
CG250243080
CG250243010
Teeth
24
12
12
12
12
12
12
12
18
18
18
18
18
24
24
24
24
24
24
24
24
24
Bore
20
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Kerf
3.2
1.8
2.5
3.5
5.0
6.0
7.0
8.0
2.5
5.0
6.0
7.0
8.0
5.0
6.0
7.0
8.0
5.0
6.0
7.0
8.0
10.0
Plate
2.2
TR /1.0
TR /1.6
2.4
3.7
4.8
4.8
4.8
TR / .6
3.7
4.8
4.8
4.8
3.7
4.8
4.8
4.8
3.7
4.8
4.8
4.8
6.35
Application: Use groovers for cutting grooves in solid wood, plywood,
veneered and plastic laminated panels. Use for standard table saws,
sliding table saws, single or double end tenoners and CNC routers.
Carbide-tipped | Flat Top Design
* All metric sizes are in millimeters.
* TR= Thin Rim
( Additional sizes are available upon request. )
15°
15°
K
PD
[ RIP STYLE SERIES ]
STANDARD SIZES METRIC SIZES
[ CROSS GRAIN SERIES ]10°
10°
K
PD
15°
12°
23
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
Truss Blades
Catalog # Dia. Teeth Bore Kerf Plate
.134"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.148"
.200"
.200"
.200"
.200"
.184"
.198"
.198"
.198"
.198"
.198"
.198"
.198"
.198"
.198"
.198"
.208"
.208"
.208"
.208"
.208"
.208"
.208"
.208"
.208"
.260"
.260"
.260"
.260"
7/8"
1"
1"
1"
1"
1"
1"
1"
1-1/8"
1"
1"
1"
1"
1-1/2"
1"
1"
1-1/8"
1"
1"
1"
1-1/2"
1-1/8"
2"
1-3/8"
40
40
40
40
60
40
48
50
50
60
60
60
60
40
60
60
60
80
80
120
80
80
80
80
12"
14"
14"
14"
14"
16"
16"
16"
16"
16"
16"
18"
18"
20"
20"
20"
20"
22"
22"
22"
30"
30"
32"
32"
TRSAO12402
TRSCL14402
TRSID14403
TRSTM14403
TRSCL14603
TRSCL16402
TRSID16483
TRSCL16503
TRSMK16503
TRSCL16603
TRSTM16603
TRSCL18602
TRSCL18603
TRSAO20402
TRSCL20602
TRSID20603
TRSMK20603
TRSCL20803
TRSTM22803
TRSCL221202
TRSAO30803
TRSTM30803
TRSCL32803
TRSMK32803
Machine
Auto OmniATB
ATB
TCG
TCG
TCG
ATB
TCG
TCG
TCG
TCG
TCG
ATB
TCG
ATB
ATB
TCG
TCG
TCG
TCG
ATB
TCG
TCG
TCG
TCG
Clary
Idaco
Timber Mill
Clary
Clary
Idaco
Clary
Mitek
Clary
Timber Mill
Clary
Clary
Auto Omni
Clary
Idaco
Mitek
Clary
Timber Mill
Clary
Auto Omni
Timber Mill
Clary
Mitek
Design
Application: For ripping dry soft or hardwoods.
Manufactured with a thicker plate for smoother and straighter
cuts every time.
Carbide-tipped | TCG and ATB Top Design | Copper Plugged Slots
15°
10°
15°
10°
D
45°45°
K
P
K
PD
10 °10 °
[ TCG ] [ ATB ]
Bolt Mounting Holes:
Auto Omni 12" = 3 right and 3 left on a 2-1/4" bolt circle.
Auto Omni 20" = 4 right and 4 left on a 3-1/2" bolt circle.
Auto Omni 30" = 6 right and
6 left on a 6" bolt circle.
Clary 14" through 20" =
3 right and 3 left tapered
holes on a 3-1/8" bolt circle.
Clary 22" = 6 holes all right on a 5" bolt circle.
Clary 32" = 6 holes all right
on a 7" bolt circle.
Mitek 16" = 3 right and 3 left
on a 6" bolt circle.
Mitek 20" = 3 right and 3 left
on a 6" bolt circle.
Mitek 32" = 6 holes all left
on a 6" bolt circle.
Timber Mill 14" and 16" =
3 right and 3 left tapered
holes 3-1/2" bolt circle.
Timber Mill 22" = 6 holes all
left tapered holes on a 4-3/4"
bolt circle.
Timber Mill 30" = 6 holes all
right tapered holes on a 6" bolt
circle.
Timber Mill 14", 16" & 20" = 3 right and 3 left on a 6" bolt
circle.
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
24
GENERAL SAW corporation
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
A General Saw carbide-tipped circular saw blade is a
precision tool and requires careful maintenance if it is to
retain its performance and precision.
Fitting
While the blade is not particularly delicate, the carbide
edges can easily be damaged by knocks and impact. For
this reason, never lay the blade down on a hard surface and
always take a little extra care when fitting.
It is important that the diameter of the flange should be
as large as possible, preferably a third of the blade itself.
Check that the blade is running true. (It should not be more
than 0.01 out of true.)
Feed
The feed speed should be kept within the limits
recommended by the machine manufacturer for the
material being cut. Feeding must be parallel to the blade.
Feeding at an angle may damage the teeth and overheat
the blade.
Cleaning and Storage
Resins and other material which easily become attached
to the sides of the blade often cause overheating of the
blades.This may result in the blade going out of tension
and even cracking. Always keep the blade clean.Wash it
with solvent. (Never try to scrape a blade clean with a hard
tool.) When not in use, the blade should be cleaned
thoroughly and stored in it's original case.
Dado blades require especially careful cleaning since
their construction causes a rather slow dispersal of heat. If
serious overheating occurs, the joint between the two discs
may be damaged. In such cases, the blade should
immediately be sent to General Saw for repair. By use of a
proprietary technique, it is possible to repair minor
damages easily and quickly.
Regrinding and Renovation
It is uneconomical to use dull blades. Should the teeth be
damaged, it may be necessary to grind away much more
the carbide than when sharpening only, thereby shortening
the life of the blade. When teeth have become excessively
damaged, it is possible for General Saw to retip the blade,
for a cost much less than purchasing a new blade.
Technical Service
General Saw has gathered its experience from many
customers working in a wide variety of industries all over
the world... Fromsawmills, cabinet shops, furniture
manufacturers, truss manufacturers, windows and door
fabricators, ship builders, manufacturers of all kinds of saw
machinery, engineering workshops, and plastic industries
among others, we understand your cutting needs.
We are always happy to place our knowledge and
experience at your disposal. If you have any doubts about
your blade selection, let us help you. All we require is:
1.Type of material.
2.Thickness of the material.
3.To be cut with the grain or across it.
4.Type of saw machine being used.
5. The smallest and largest usable diameter of the blade.
When ordering you should also state the diameter of the
bore and the dimensions and positions of any keyways or
pin holes.
Our Guarantee
All General Saw blades are manufactured under a very
strict quality control. Each tool is accurately measured and
checked several times during the manufacturing process
to ensure tight tolerances.
If after 30 days of use you find you are not completely
satisfied with your blade, return it and we will replace it or
give you a full refund... No questions asked.
This guarantee does not apply to any tool that has been
sharpened or altered by a facility other than General Saw
Corporation. Nor does it apply to tools which have been
damaged by careless or incorrect treatment.
General Saw reserves the right to make changes in
design and construction without prior notice.
Maintaining Your Blade
i
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
GENERAL SAW corporation
Tooth Styles
4 ATB + 1 Raker.Used on General purpose / combination blades. Rips and crosscutsequally well and provides a very smooth cut. It produces very lowcutting pressures that almost eliminate the tendency to tear out.The chips fall free in the chip spaces created by the large sideclearance angles.
4-1ATB
ST
Straight Top.Typically used for ripping (cutting with the grain) softwood andhardwood. The advantage of this design is that it cuts both sidesof the kerf simultaneously, making it twice as effective as teeth in astaggered tooth saw. Its balanced cutting forces reduce saw bodystresses and the tooth form is relatively easy to maintain.
Alternate Top Bevel.Typically used for general purpose / combination and crosscut sawblades. One advantage of this design is that it produces very lowcutting pressures that almost eliminate the tendency to tear out.The chips fall free in the chip spaces created by the large sideclearance angles.
High Alternate Top Bevel.Higher top bevel grind and longer teeth than standard ATB blades.Specially designed for cutting acrylics and formicas or melaminewith chip free results. Extra fine chipless sawing on acrylics andformicas or melamine where a scoring unit is not used.The chips fall free in the chip spaces created by the large sideclearance angles.
Triple-Chip Grind.The 45º Teeth do the cutting and the flat tooth is a raker for chipcleanout. Triple Chip Grinds combine a balanced cutting force,low tooth drag and free chip flow. This blade can be used to cutMelamine, Plastics, Formica®, other materials that are subject tochipping. Large inclined angles in the cutting edges give thetriple chip form good wear resistance, and low tooth drag.
.
Hi-ATB
ATB
TCG
ii
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
GENERAL SAW corporation
Definitions:
Anti-Kickback Chip Limiter - A special shoulder design
that prevents kickback from overfeeding.
Bore - Ofter referred to as the Arbor hole, it is how the
saw blade is mounted to saw.
Carbide Tip - Also called the tooth, carbide tips can be
re-sharpened, giving the blade a longer life.
Cooling Slot - Slots that are laser cut into the saw to
keep it from overheating during operation.
Copper Plug - Used to reduce the noise created by the
saw blade while it is being operated.
Diameter - Measured from the furthest edge of one tip
to the furthest edge of the tip directly opposite.
Expansion Slots - Reduces noise and allows the blade
to expand and contract as needed.
Gullet - Dished space between teeth that provides
clearance for the material being removed.
Keyways & Pin Holes - Special mounting features
needed for some machines. Size and number may vary.
Hook Angle - The amount of forward or backward lean
each tooth has.
Kerf - The width of the carbide tip measured from the
two widest points of the top of the carbide tip.
Plate - The body of the saw that is made from a high
carbon, chrome, nickel and special moly-alloy steel.
Radial Side Clearance - Side relief provided to prevent
burning or melting.
Relief Angle - Top clearance that changes with the style
of blade.
Shoulder - The shoulder's major functions are to add
strength and support to the carbide tip.
Tangential Clearance - Also called “Head Clearance” it
allows the tooth to move through without burning.
Tensioning Ring - Ring made from tensioning plate.
Maintains the saw blades straightness under stress.
Top Bevel Angle - The steeper the angle, the sharper
the tooth is and the faster it becomes dull.
Blade TermsCT
ESG
GS
L
R
H
B - Bore
C - Radial Side Clearance
CP - Copper Plug
CS - Cooling Slot
CT - Carbide Tip
D - Diameter
ES - Expansion Slot
R - Relief Angle
S - Shoulder
T - Tangential Clearance
TB- Top Bevel Angle
TR - Tensioning Ring
WS - Wiper Slot
G - Gullet
H - Hook / Rake Angle
K - Kerf
KW - Key Way
L - Anti-Kickback Chip Limiter
P - Plate
PH - Pin Hole
DPH
KWB
ES
CP
TR
P
CS
WS
K
TB
C T
P
iii
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
GENERAL SAW corporation
Keyways & PinholesBlades with Pin Holes and Keyways
Please provide the following information when ordering:
Pin Holes - Number of pin holes (P)
- Diameter of pin holes (PD)
- Bolt Circle (BC)
Example: Pinholes = 2/10/60
Keyways - Number of keyways (K)
- Width of keyways (X)
- Depth of keyways(Y)
Example: Keyways = 2/20/5
Blades with Screw Holes
A drawing should always be enclosed when ordering
saw blades that require screw holes. If a drawing is
not available, please provide the following
information to us:
- Type of Hogging Unit, etc being used.
- Number of screw holes (SH) and the relative
positions (A).
- Diameter of bolt circle countersunk, right (R) or
left (L), with the blade held so that the teeth on
the top edge point towards you.
- Screw hole countersink angle (V) or Diameter (E)
- Screw size (e.g. M6, M8)
Example: Screw Holes = 4/7/140/12/45/L
BC
PD
X
Y
E
BC
A
RL
V
iv
General Saw Corporation | 2518 Andalusia Blvd. | Cape Coral, FL 33909 | Phone: 800-772-3691 or 800-306-7279 | FAX: 239-574-5328 | www.generalsaw.com
GENERAL SAW corporation
Notes
v