2011 PRODUCT LINETECH INFO - MAINLINE

v1.0

POSI-LOCK INNER-CAM

FEATURES & BENEFITS• Precise, mechanically locking inner-cam system• Ø3/32” hardened stainless steel pin - 1,141 psi minimum shear strength• 1 or more inner-cam screws located in a dedicated hole• Provides a “double strength” positioning system that prevents slippage even if screws come loose• Redesigned groove profile for improved serving life• ½” draw length increments (each letter is a ½” setting)• Improved draw length and draw weight accuracy

2011 PSE PERFORMANCE CAMS

FEATURES & BENEFITS• Posi-Lock Inner-Cam system with ½” draw length adjustments• Dynamically tuned for performance without handshock or vibration• High-strength machined aluminum construction• Laser engraved inner-cam, stop & orientation marks• Solid wall with quiet, cushioned stop• Sealed ball bearings

HP SINGLE CAM SYSTEM

FEATURES & BENEFITS• Dynamically tuned & matched to HP cam for improved vibration response• Asymmetric groove design for improved performance• High-strength 6061-T651 aluminum• Struts designed to maximize strength and minimize rotational inertia

FEATURES & BENEFITS• Smooth draw with a gentle roll-over and generous valley • Integrated Posi-Lock inner-cam storage pocket• High-strength 6061-T651 aluminum alloy• 6-inches of draw-length adjustment• Unique S-TRAC struts - lighter & stronger structural design for increased efficiency and improved management of torsional loads

MP SINGLE CAM SYSTEM

FEATURES & BENEFITS• Dynamically tuned & matched to MP cam for improved vibration response• Asymmetric groove design for improved performance• High-strength 6061-T651 aluminum• Thin, offset strut design for maximum strength and minimum rotational inertia

FEATURES & BENEFITS• Perfect blend of high-performance and high- efficiency with a smooth draw & comfortable valley• Integrated Posi-Lock inner-cam storage pocket • Ultra high-strength 7075-T651 aluminum alloy• 6-inches of draw-length adjustment• Fully engineered offset S-TRAC struts - thinner, lighter & stronger structural design for maximum efficiency and improved management of torsional loads

DRAW FORCE CURVESMAINLINE – 30” DRAW SETTINGS

STATEMENTS OF FACT• The MP cam is PSE’s lightest, most efficient single cam design ever• MP & HP cams are the perfect blend of performance and draw profile

1. DRAW SLOPE (BRACE TO PEAK WEIGHT)The more vertical the slope, the higher the stored energy.

DRAW FORCE CURVES AND BOWCHARACTERISTICS THAT AFFECT SPEED

3. POWERSTROKEThe farther you pull, the more energy you store.

STATEMENT OF FACT• It is all about stored energy and efficiency. More Energy + Better Efficiency = More Speed

4. EFFICIENCYLight-weight cams with precision ball bearings, high-performance limbs, low friction cable and string containment & speed nocks.

2. ROLL-OVER (PEAK WEIGHT to FULL DRAW)The more aggressive the roll-over, the higher the stored energy.

VIBRATION & NOISE SUPPRESSIONLOOKING AT THE BOW AS A DYNAMIC SYSTEM

FACTS• PSE’s expertise on the fundamental structure and dynamics of bow components now allows optimization of the entire dynamic system• Bow dynamics are now at a level of refinement where strategically positioning elastomeric dampers (with a very specific material formulation) has a meaningful affect on bow noise and vibration• We don’t just guess – we calculate, test, analyze and refine

FEATURES & BENEFITS• Radically improved bow vibration response - New structural design approach for reduced handle flex & vibration - Reformulated Vibracheck Limb Bands and Cable Rod Dampers - Fully engineered cam dynamics - Dynamically tuned and matched idlers• New vibration damping configurations target specific sources of bow vibration & noise - String Vibration – Vibracheck Backstop - Limb Vibration – Vibracheck Limb Bands - Handle Vibration – Vibracheck Limb Bands at pocket-handle interface - Cable Rod Vibration – Vibracheck Cable Damper

PLANAR FLEX STRUCTURAL DESIGN

FACTS• Handle design has progressed far beyond simple structural integrity - PSE standard 100,000 cycle fatigue test is essentially a formality - PSE handle styling is functional – good looks come naturally out of good fundamental design• Every bow handle flexes – Planar Flex handle design incorporates specific features to control the amount and direction of flex - Fully Engineered S-TRAC struts – stronger structural design optimized to manage loads and reduce flex - Sight window transitions – the ideal shape to minimize flex & twist - RAPTOR grip design – cross-section and radii to handle grip stresses

FEATURES & BENEFITS• Reduced handle deflection - 2011 Bow Madness has 40% less handle deflection than 2010• Improved dynamics and vibration response

IMPROVED STRUCTURAL DESIGN2010 vs. 2011 BOW MADNESS HANDLE

HIGH SPEED VIDEOREFORMULATED VIBRACHECK LIMB BANDS

REFORMULATED VIBRACHECK LIMB BANDS2010 BOW MADNESS w/ & w/out LIMB BANDS

HIGH SPEED VIDEOREFORMULATED CABLE ROD DAMPER

DYNAMICALLY TUNED & MATCHED IDLERS2011 BOW MADNESS

FINAL VIBRATION ANALYSISOVERALL 2010 vs. 2011 BOW MADNESS

RAPTOR GRIPS

FEATURES & BENEFITS• Fully machined grips with standard width, depth, angle & corner radius - RAPTOR Grip – contour machined grip throat surfaces provide accuracy and comfort for Bow Madness, Bow Madness XS and Brute HP - B.E.S.T. RAPTOR Grip - adds knuckle clearance and improved grip throat ergonomics to Bow Madness XL• Mutually agreed upon by PSE Pro Shooters - One of the few things they all agree on• Consistent foundation for aftermarket grip options - Adjustable grip (p/n 01160), wood over-grips, heated grips

MINI SF LIMBS

FEATURES & BENEFITS• Utilizes PSE’s patented high limb preload design• Builds like a solid limb, but flexes like a split limb• Optimized for every individual limb size• Engineered to produce ideal flex, draw and performance when coupled with the new FC Cam System

“FIXED PEAK WEIGHT”CABLE POSITION

“GROW WITH YOU”CABLE POSITION

FC CAM SYSTEM

FEATURES & BENEFITS• Incredibly adjustable 2-cam system based on PSE’s original patented rotational inner-cam design• Designed specifically for past parallel limb bows• Ideal system for growing archers - Chaos FC – 12 inches of draw length adjustment and 50% total weight adjustment from peak - Mini Burner – 11 inches of draw length adjustment and 60% total weight adjustment from peak - Maximum performance “Fixed Peak Weight” setting - Maximum adjustability “Grow With You” setting

NEW CABLE SLIDE

FEATURES & BENEFITS• New material – easier on strings and cables• New geometry – in depth study of cable and string movement during draw cycle to minimize impact on bow dynamics• Reduced friction design for better bow efficiency

EXPERIENCE. PERFORMANCE.