2011_en_screen

DZ10092.EN

The Year 2010 at Graupner

New 2.4 GHz Transmission Technology HoTTOn the occasion of the trade fair Fazination Modellbau in Friedrichshafen, the new 2.4-GHz transmission technology HoTT was announced. The appropriate press representatives were invited to the press conference. The technical features of this technology were received with as much enthusiasm as the immediate availability of individual HoTT products. HoTT combines intelligent and reliable transmission in the 2.4-GHz band with extensive integrated telemetry functions.

Yes, we can fly Rookie Flying to Recruit New Model FlyersYes, we can fly was created so that young people 10 and older who are interested in model sport flying could find some help getting started in the hobby. Together with the clubs MSC Kirchheim, MFG Dettingen, Wolf Hirth Kirchheim, and MFC Schlierbach, four different dates were offered during school vacation. That provided them with their first contact to model flying and to the club. The young people were able to control an electric glider in teacher/pupil mode. ROOKIE-S electric models were used; all equipped with teacher/pupil remote control systems. For the year 2011, a continuation of Yes, we can fly is planned. Interested clubs can contact [email protected].

Show Room with Factory SalesThe Show Room has been restructured and now includes not only a continuous product exhibition in the areas of aircraft, boat, and car but also a factory sales area. Offered here are odd lots, seconds, and excess inventory from our current product range. Bargain hunter alert: We regularly provide information on the current offerings in our newsletter. The offerings can also be ordered online. We have set up a Factory Sales OnlineShop just for this purpose. Check it out at www.graupner.de.

80th Anniversary with Air ShowIt is the year 2010, and Graupner looks back upon a history of 80 years. To properly celebrate this occasion, an anniversary air show was held on 12 September 2010. At the starting line were invited pilots of renown and rank, such as F4C World Champion Max Merckenschlager with his Stinson A1, Peter Michel with an MD 11 Lufthansa-Cargo, Robert Otte with a Citation CJ3, along with Klaus Lenhart in a synchronous flight of an EXTRA 330SC with Albert Winter and a model EXTRA 300. The scene of the action was the glider airport in Dettingen/ Teck. At the 15th Model Flight Day of MFG Dettingen, Graupner was able to celebrate its anniversary in flight on a great public stage.

Model Building Action Days at Ravensburger SpielelandIn August, Graupner hosted the Model Building Action Days. The attractions included breathtaking air shows and exciting model car demonstrations, as well as car and boat racing for everyman. This was the third time that the Model Building Action Days had been held at the Adventure Playground of Kptn Blaubr and his crew. The model building experts at Graupner showed the best tricks in the air as well as on the water. The Spieleland Lake was the province of racing boats, cruisers, and beginners boats. The event field was transformed into an airport, and the ambitious pilots among the visitors to Spieleland were given a hands-on opportunity to try out teacher/pupil remote control systems More information is available at www.spieleland.de.

< Andreas and Stefan Bhlen, specialistswith long experience and members of the Swiss national team trust their competitive models the new 2.4 GHz Transmission Technology HoTT System to.

Teck Cup Heli Academy 2010Another edition of the Heli Academy was held at the end of September in the seminar rooms at GRAUPNER. The speakers Fred Annecke, Norbert Wybranietz, and Raimund Zimmermann provided an interesting and informative program on both seminar days and not only provided valuable assistance in building, programming, and flying-in, but also conveyed theoretical and practical expert knowledge in the area of model helicopters through attractively designed workshops and training flights with the GRAUPNER LOGO 10 Compact ARF. Everyone agreed that the Heli Academy had provided an important basis for entry into the fascinating world of RC helicopters. More information is available at www.heli-akademie.de. The Teck Flying Cup is one of the greatest and most traditional of all model flying competitions. The simplified flight mission, as well as the challenges and attractive landscape of the flight field provide this event with its particular flair. This was the 48th time that this competition was held under the auspices of Graupner. Nearly 200 participants came to Teck on the first weekend of September to test their skills against the competition. The 49th Cup will be held on 10/11 September 2011. Info at www.msc-kirchheim.de.

Ship Model Cup Brgerseen, Whitsuntide 2010On the two Whitsuntide holidays, the now traditional GRAUPNER Schiffsmodellcup started with a new attendance record, thanks also to the simply perfect weather. The first event belonged to the racers. About 100 pilots started in various racing classes, providing exciting racing action for themselves and the interested spectators as they battled for the best places. On Sunday the spectators were treated to the popular show runs. From steamship to racing boat, the participants presented the complete range of ship model building at its finest. The employees of Graupner also presented and demonstrated new items and other highlights from recent years.

BalsaTecThe Graupner subsidiary has been made independent and now operates as a sister company. BalsaTec is the partner for the balsa wood needs of industry. The various products were shown to an expert public at the Composite Europe trade fair in Essen. More information is available at www.balsatec.de.

2

3

A Retrospective

RC electric-powered model aircraft

ROOKIE XSOrder No. 92200 Wingspan about 700 mm GraupnerJuniorLineRCelectric glidermodel Outstandingglidercharacteristics Canbeassembledandreadytofly injustminutes EspeciallysturdySOLIDPOR ready-to-flymodel Removablecockpitwithmagnetic closure SeparableairfoilwithCRPstrut 2.4GHztransmitterwithLCD display Packingcartondesignedasgift box

Order No. 92200 FinishedpartsmadeofSOLIDPOR hardfoam ElectricmotorN207.4Vpreinstalled Replacementpropellerwithcliphub included Alldecorativeelementsareprinted Detailedassemblyinstructions included RCreceiverunitpreinstalled 2.4GHztransmitterincluded 4mignonAAbatteriesfortransmitter included LiPobattery2/250mAh7.4V included AutomatikLiPochargerincluded

Specification Wingspanapprox. Overalllength,approx. All-upweight,approx. Totalsurfacearea,approx. Tailplanearea Wingarea Wingloading

Completeacce

edindel ssoriesinclud

ivery

700 520 100 7,0 1,0 6,0 14

mm mm g dm dm dm g/dm

RC functions Rudder Elevators Enginerpms

Replacement parts OrderNo. Description 92200.12 ReplacementpropellerforROOKIEXS 92200.20 Replacementbattery7.4V250mAhforROOKIEXS

4

Power Models5

Model aircraft


TRAINER XSOrder No. 92201 Wingspan about 500 mm GraupnerJuniorLineRCtrainer Outstandingglidercharacteristics Canbeassembledandreadytofly injustminutes EspeciallysturdySOLIDPOR ready-to-flymodel Ingenious,crash-proofclip-on propellerhub Airfoilcanbeunscrewed 2.4GHztransmitterwithLCD display Packingcartondesignedasgift box


Completeacce


ivery

500 390 70 4,6 1,0 3,6 15



Replacement parts OrderNo. Description 92201.12 ReplacementpropellerforTRAINERXS 92201.20 Replacementbattery7.4V180mAhforTRAINERXS

6

Power Models7

Order No. 92201 Finishedpartsmade ofSOLIDPORhardfoam ElectricmotorN20 7.4Vpreinstalled Replacementpropellerwith cliphubincluded Alldecorativeelementsareprinted Detailedassemblyinstructions included RCreceiverunitpreinstalled 2.4GHztransmitterincluded 4mignonAAbatteriesfortransmitter included LiPobattery2/180mAh7.4V included AutomatikLiPochargerincluded

Model aircraft


EXTRA 300 XSOrder No. 92202 Wingspan about 500 mmOrder No. 92202 Finishedpartsmade ofSOLIDPOR hardfoam ElectricmotorN20 7.4Vpreinstalled Alldecorativeelements areprinted Detailedassemblyinstructions included RCreceiverunitpreinstalled 2.4-GHztransmitterincluded 4mignonAAbatteriesfortransmitter included LiPobattery2/250mAh7.4V included AutomatikLiPochargerincluded GraupnerJuniorLineRCtrainer Outstandingglidercharacteristics Canbeassembledandreadytofly injustminutes EspeciallysturdySOLIDPOR ready-to-flymodel Ingeniousclip-onpropellerhub Removableairfoil 2.4-GHztransmitterwithLCD display Suitableforgroundstartfrom smoothrunways


Completeacce


ivery

500 460 100 5,8 1,3 4,5 17


RC functions Rudder Elevators Ailerons Enginrpms

Replacement parts OrderNo. Description 92202.12 ReplacementpropellerforEXTRA300XS 92200.20 Replacementbattery7.4V250mAhforROOKIEXS

8

Power Models9

Model aircraft

RC model glider

AMIGO IV ARFOrder No. 9546 Wingspan about 2000 mmRecommendation for the propulsion Motor Order No. INLINE4707,4V. 6605 Propeller Order No. 1360.20.10 Speedcontroller Order No. 7221 Spinner Order No. 1385.383 Shortbuildingtime Verygoodflightperformanceand characteristics Goodthermicsensitivity 2-color,white/redfoilalready applied Cockpitasdeep-drawnpart

Order No. 9546 Almostreadytoflymodel(ARTF) Wingandtailpanelsinribbed design,full-balsarudder Fuselageinconventionalwood design Wingscanbeseparatedinthe middle Tailpanelcanberemoved

Replacement parts OrderNo. Description 9546.1 CanopyforAMIGOIV 9546.2 FuselageforAMIGOIV 9546.3 WingpandelsforAMIGOIV 9546.4 TailplaneandfinforAMIGOIV 9546.14 DecalsheetforAMIGOIV

Specification Wingspanapprox. 2000 Overalllength,approx. 1115 1100 All-upweight,approx. Totalsurfacearea,approx. 69,97 Tailplanearea 7,5 Wingarea 62,47 Tailplanesection Clarky NACA4409 Wingsection

mm mm g dm dm dm

RC functions Rudder Elevators Speedcontroller (ifequippedwithmotorpylon)

Theillustrationshowsthefullyassembledmodel

10

Power Models11

Recommended accessories Type MX-12GraupnerHoTTComputersystem2.4GHz SERVOC577lose Pylonenginemountforelectricmotor

OrderNo. 4754 4101.LOSE 2910

No.off 1 1 1

Model aircraft

RC model glider

AMIGO IVOrder No. 9547 Wingspan about 2000 mm Cockpitasdeep-drawnpart Verygoodthermiccharacteristics Verylowsurfacearealoading Canbeconvertedtoanelectric gliderwithaelectricmotorpylon retrofit

Order No. 9547 Kitwithlaser-cutwoodparts IdealstartforRCflight Wingandtailpanelsinribbeddesign Trimmednoseandendmoulding Fuselagefullysheetedin balsa/plywooddesign

Orderno.9547readyforconstructionofthebasicairframe.Notpackcontents

Recommendation for the propulsion Motor Order No. INLINE4707,4V. 6605Theillustrationshowsthefullyassembledmodel

Propeller Order No. 1360.20.10

Speedcontroller Order No. 7221

Spinner Order No. 1385.383

Recommended accessories Type MX-12GraupnerHoTTComputersystem2.4GHz ServoC577Eco Pylonenginemountforelectricmotor

OrderNo. 4754 4101 2910

No.off 1 1 1

Specification Wingspanapprox. 2000 Overalllength,approx. 1115 All-upweight,approx. 1100 Totalsurfacearea,approx. 69,97 Tailplanearea 7,5 Wingarea 62,47 Tailplanesection Clarky Wingsection NACA4409

mm mm g dm dm dm

RC functions Rudder Elevators Speedcontroller(ifequippedwithmotorpylon)

Replacement parts OrderNo. Description 9546.1 CanopyforAMIGOIV

12

Power Models13

Model aircraft

RC model glider

ALPINA 3001 Champ PRO - ARCOrder No. 41900 Wingspan about 3001 mmOrder No. 41900 Order No. 41910 ALPINA3001ChampinCarbonChampdesignoffersprovenAlpinafeelingwithoutanycompromisesinperformanceordynamics.Thestrengthsof thismodellieinitsextraordinarythermicsensitivityaswellasitsspeed,agility,andturningcapabilities.Ofcourse, itisalotmorematurethanitslittlesister,butevenaerobaticallyinclinedpilots aresuretogettheirmoneysworth, thankstothebuilt-inanti-stodgyfactor. Contestline equipment Weight-optimizedGRP/CRPfuselage Optimalforcetransmissionvia rectangularcarbonconnectorin balsa-GRPfullwing Rudderflapsdesignedfor competitiveuse Allruddersusetheelasticflap design Minimalailerongap Camberedflapswithperfectsealing lip Laser-cutRCwoodset High-qualitysmallparts Controlleversforpendulum-typetailplaneandfuselageconnectioncompletelyinstalled,withresinapplied Weight-optimizedpendulum-type rudderwithinteratedtailplanelock Colour-coordinatedGFPcockpit canopy. Best. Nr. 41910 Precoveredintwocolours (white/red) Designisprinteddirectlyoncovering sheetandwillnotruboff Specification Wingspanapprox. 3001 Overalllength,approx. 1420 All-upweight,approx. from2200 Wingarea 48,2 Wingsection TA-30-Strak8,3% RC functions Elevators Rudder Ailerons Camberedflaps Towcoupling

ALPINA 3001 Champ PRO - ARC Design KlassikOrder No. 41910 Wingspan about 3001 mmOrder No. 41910 Replacement parts OrderNo. Description 41900.1 GRPCanopyforALPINA3001CHAMP 41900.2 FuselageforALPINA3001CHAMPPRO 41900.15 FuselagedecalsetforALPINA3001CHAMPPRO 41900.20 WingjoinerforALPINA3001CHAMPPROARC 41900.50 WiresetforALPINA3001CHAMPPROARC 41900.90 WoodenpartsforALPINA3001CHAMPPRO 41910.3 WingsetforALPINA3001CHAMPPROARFClassicDesign 41910.4 TailplaneforALPINA3001CHAMPPROARFwhite/red 41910.10 RudderforALPINA3001CHAMPART,white Order No. 41900 Replacement parts OrderNo. Description 41900.1 GRPCanopyforALPINA3001CHAMP 41900.2 FuselageforALPINA3001CHAMPPRO 41900.3 WingsetforALPINA3001CHAMPARC 41900.4 TailplaneforALPINA3001CHAMPARC 41900.10 RudderforALPINA3001CHAMPARC 41900.14 DecalsheetforALPINACHAMPPRO 41900.20 WingjoinerforALPINA3001CHAMPPROARC 41900.50 WiresetforALPINA3001CHAMPPROARC 41900.90 WoodenpartsforALPINA3001CHAMPPRO Recommended accessories Type ServoDES448BBMG Digital-ServoDES678BB,MG 4-flapmodel Competitivedesign Airfoilsandtailplanereadyfor constructionofthebasicairframe Shortconstructiontime Gliderandelectricversionavailable

OrderNo. 7914 7943

No.off 4 2

mm mm g dm

Fig.showsdesignmodel

14

Power Models15

Model aircraft

RC electric model aircraft

ALPINA 3001 Champ Electro - ARCOrder No. 41950 Wingspan about 3001 mmOrder No. 41950 Order No. 41960 ALPINA3001ChampinCarbonChampdesignoffersprovenAlpina feelingwithoutanycompromisesin performanceordynamics.The strengthsofthismodellieinitsextraordinarythermicsensitivity,butits speed,agility,andturningcapabilitiesalsoofferlotsoffun.Thanksto perfectlyattunedleverconditions,it isalsopossibletousepowerfulmotorswithhardlyanyincreasein weightcomparedtothegliderversion. Contestline equipment Weight-optimizedGRP/CRP fuselage Optimalforcetransmissionvia rectangularcarbonconnectorin balsa-GRPfullwing Rudderflapsdesignedfor competitiveuse Allruddersusetheelasticflap design Minimalailerongap Camberedflapswithperfect sealinglip Laser-cutRCwoodset High-qualitysmallparts Weight-optimizedpendulum-type rudderwithintegratedtailplane lock Controlleversandhorizontal stabiliserconnectionscompletely installed,withresinapplied Colour-coordinatedGFPcockpit canopy Order No. 41910 Precoveredintwocolours (white/red) Designisprinteddirectlyoncovering sheetandwillnotruboff Specification Wingspanapprox. 3001 Overalllength,approx. 1420 All-upweight,approx. from2450 Wingarea 48,2 Wingsection TA-30-Strak8,3% mm mm g dm

ALPINA 3001 Champ Elektro - ARF Design KlassikOrder No. 41960 Wingspan approx. 3001 mmOrder No. 41950 Replacement parts OrderNo. Description 41900.1 GRPCanopyforALPINA3001CHAMP 41900.3 WingsetforALPINA3001CHAMPARC 41900.4 TailplaneforALPINA3001CHAMPARC 41900.10 RudderforALPINA3001CHAMPARC 41900.20 WingjoinerforALPINA3001CHAMPPROARC 41900.50 WiresetforALPINA3001CHAMPPROARC 41950.2 FuselageforALPINA3001CHAMPELEKTRO 41950.14 DecalsheetforALPINA3001CHAMPELEKTRO 41950.90 WoodenpartsforALPINA3001CHAMPELEKTRO 4-flapmodel Competitiondesign Airfoilsandtailplanereadyfor constructionofthebasicairframe Shortconstructiontime Gliderandelectricversionavailable

Order No. 41960 Replacement parts OrderNo. Description 41900.1 GRPCanopyforALPINA3001CHAMP 41900.20 WingjoinerforALPINA3001CHAMPPROARC 41900.50 WiresetforALPINA3001CHAMPPROARC 41950.2 FuselageforALPINA3001CHAMPELEKTRO 41950.15 DecalsheetforALPINA3001CHAMPELEKTROforfuselage 41950.90 WoodenpartsforALPINA3001CHAMPELEKTRO 41960.3 WingsetforALPINA3001CHAMPELEKTROARTwhite/blue 41960.4 TailplaneforALPINA3001CHAMPELEKTROARFwhite/blue

Recommended accessories Type ServoDES448BBMG Digital-ServoDES678BB,MG

OrderNo. 7914 7943

No.off 4 2

Recommendation for the propulsion Motor Flightbattery Order No. Order No. COMPACT54012 7657.3 V 7720 Propeller Order No. 1336.40.25 Speedcontrols Order No. 7237 Spinner Order No. 6042.5

RC functions Elevators Rudder Ailerons Camberedflaps Towcoupling Motor

16

Power Models17

Model aircraft


CHIPOrder. No. 4564 Wingspan approx. 1050 mmBest. Nr. 4564 KitmadeofGraupnerSOLIDPOR high-densityfoam AirfoilwithCRP strut CNC-machined cockpitcanopy Brushless-Motor INLINE40011.1V included CAMFOLDING PROP16x8cm included Generousdecorativedecal sheetincluded Detailedinstructionswithphotos oftheconstructionstages

CHIP ARTFOrder No. 4564.100 Wingspan approx. 1050 mm GraupnermodelMadein Germany Mini-sizedHotlinemodel Veryhighspeedrange Removableairfoilandtailplane Cartoncanbeusedastransport box

BrushlessmotorINLINE40011.1VandCAMFOLDINGPROP 16x8cminstalledandreadytooperateunderorderno. 4564.100andincludedunderorderno.4564

Order No. 4564.100 FinishedpartsofGraupner SOLIDPORhardfoam AirfoilwithbondedCRPstrut CNC-machinedcarbon-lookcanopy BrushlessmotorINLINE40011.1V installed CAMFOLDINGPROP16x8cm installedandreadytogo High-qualityDES261BBservos installed Alldecalelementsaffixed

Order No. 4564 Recommended accessories Type MX-12GraupnerHoTTComputersystem2,4GHz LiPobatteryV-MAXX30C3/85011.1VBEC ServoDES261BB COMPACTFLY15BEC6-16,8VBECconnector Order No. 4564.100 Recommended accessories Type MX-12GraupnerHoTTComputersystem2,4GHz LiPobatteryV-MAXX30C3/85011.1VBEC COMPACTFLY15BEC6-16,8VBECconnector OrderNo. 4754 7621.3BEC 7220 No.off 1 1 1 OrderNo. 4754 7621.3BEC 7903 7220 No.off 1 1 2 1

Specification Wingspanapprox. 1050 mm Overalllengthapprox. 810 mm All-upweight,approx. 500 g Totalsurfacearea,approx. 20,8 dm Tailplanearea 3,7 dm Wingarea 17,1 dm Tailplanesection NACA009 Wingsection RG14mod. Wingloading 24 g/dm


Pices dtaches Rf.N Description 6297.1 CanopyforCHIPandTERRYS 6297.2 FuselageforCHIPandTERRYS 6297.3 WingforCHIPandTERRYS 6297.4 TailplaneandfinforCHIP 4564.14 DecalsheetCHIPTheillustrationshowsthefullyassembledmodel

18

Power Models19

Model aircraft

RC electric aerobatic model

LEKI EXTRA 330SCOrder No. 9545 Wingspan approx. 1200 mmOrder No. 9545 AerobaticmodelmadeofGraupner SOLIDPORhardfoamparts IncludesGraupnerCOMPACT400Z BRUSHLESSmotor,including precisionspinner50mmand E-PROP30x15cm Vacuum-moldedandmilledcanopy High-strengthABSpartssuchas motormount,undercarriagemounts, andairfoilmountingelementsare includedinthepackage One-pieceairfoilwithCFKstrut Decorativedecalsheetfor GRAUPNERversionandLEKI originalversionincluded Detailledassemblyinstructionwith photosoftheconstructionstages Excellentaerobaticcharacteristics Semi-scalemodelwithwheel covers Packofhobbybuildingmaterials MadeinGermany Excellentmotorperformancefor verticalclimbs

Simplebatterychangewithsnap-closecover.

IncludesGraupnerCOMPACT400Z BRUSHLESSmotor,includingprecision spinner50mmandE-PROP30x15cm

Recommended accessories Type MX-16COMPUTERSYSTEM2,4GHz DES476BBdigitalservo COMPACTCONTROL45BECG3.5connector LiPobatteryV-MAXX45C3/220011.1VG3.5 Specification Wingspanapprox. 1200 mm Overalllength,approx. 1080 mm All-upweight,approx. 1250 g Totalsurfacearea,approx. 31,2 dm 5,8 dm Tailplanearea Wingarea 25,4 dm Tailplanesection NACA0010 NACA0015 Wingsection Wingloading 40 g/dm Replacement parts OrderNo. Description 9545.1 CanopyforLEKIEXTRA330SC 9545.14 DecalsheetforLEKIEXTRA330SC 9545.2 FuselagehalfshellforLEKIEXTRA330SC 9545.3 WingforLEKIEXTRA330SC 9545.4 TailplaneandfinforLEKIEXTRA330SC 9545.5 ABSSmallpiecesforLEKIEXTRA330SC 9545.8 SpatsforLEKIEXTRA330SC

OrderNo. 4755 7915 7224 9722.3

No.off 1 4 1 1

20

RC functions Rudder/tailwheel Elevators Ailerons Enginerpms

Theillustrationshowsthefullyassembledmodel.

Power Models21

Model aircraft


Electric ROOKIE QROrder No. 4239 Wingspan about 1400 mmOrder No. 4239 FinishedpartsofGraupner SOLIDPORhardfoam SOLIDPORhardfoamparts readyforinstallationofthe ailerons SeparableairfoilwithCRPstrut Removablecockpitofblue SOLIDPOR BrushlessmotorsetCOMPACT300 included CAMSLOWFLYPROP16x8cm included Generousdecorativedecalsheet included

Electric ROOKIE QR ARTFOrder No. 4239.100 Wingspan about 1400 mm Packofhobbybuildingmaterials MadeinGermany Idealbeginnersmodel Especiallysturdydesign Canberetrofittedwithailerons Cartoncanbeusedastransport box

BrushlessMotorsetCOMPACT300includedinorderno.4239 Underorderno.4239.100itisinstalledandreadytogo

Order No. 4239.100 CompletepackageincludesLiPo batteryandLiPocharger SeparableairfoilwithCRPstrut 4C231servosbuiltin BrushlessMotorsetCOMPACT300 withCAMSLOWFLYPROP16x8cm preinstalled

Li-Pocharge 3/2500and 0LiPobattery 9.10 O rderNo.423

rinthepack

Order No. 4239 Recommended accessories Type MX-12COMPUTERSYSTEM2,4GHz ServoC231 LiPobattery20C3/250011.1VG3.5 Order No. 4239.100 Recommended accessories Type MX-12COMPUTERSYSTEM2,4GHz

OrderNo. 4754 5109.LOSE 7633.3

No.off 1 2 1

OrderNo. 4754

No.off 1

Specification Wingspanapprox. Overalllength,approx. All-upweight,approx. Totalsurfacearea,approx. Tailplanearea Wingarea Tailplanesection Wingsection Wingloading

1400 960 820 27,3 3,9 23,4 NACA009 HQ3/12 30


RC functions Rudder Elevators Ailerons Enginerpms


Replacement parts OrderNo. Description 4218.1 Canopy 4239.2 Ready-formedfuselagewithfinandrods 4239.3 WingsetforHIFLY 4218.4 Elevator 4218.5 ABSsmallparts 4239.14 DecalsheetforELEKTROROOKIEQR 4218.20 Wingjoiner,CFRP

22

Power Models23

Order No. 4239.100 CompletepackageincludesLiPo batteryandLiPocharger SeparableairfoilwithCRPstrut 4C231servosbuiltin BrushlessMotorsetCOMPACT300 withCAMSLOWFLYPROP16x8cm preinstalled

Model aircraft

RC aerobatic electric model

TAXI SPORT IIOrder No. 9586 Order No. 9586.M Wingspan approx. 1600 mm Wingspan approx. 1600 mmRecommendation for the propulsion Motor Battery Order No. Order No. G RAUPNERCOM- 9733.3 PACT465Z14,8V 7772 OSMAX46LA 1888 O SMAX46AX 2701 Controller Order No. 7224 Propeller Order No. 1318.40.25 1318.28.15 1318.28.15 Silencer Order No. ARTF(AlmostReadytoFly) DSS-System(DirectSteering System) Aerobatictrainer Wingsremovablefortransport

1885.33 1870.72 1809.33 1871.72

Order No. 9586 ARTFmodel(almostreadytofly) Controlofrudderandelevatorsvia DSSsystem Completebalsa/plywooddesign Idealforswitchingtoaileron- controlledmodels Fuselage,wings,andtailplane pre-coveredwithmulticoloredfoil Wheels,smallparts,and accessoriesforrudderlinkage Partsincludedforelectricinstallation

Recommended accessories Type MX-12GraupnerHoTTComputersystem2.4GHz ServoDES807BB,MG ServoC5077Eco Replacement parts OrderNo. Description 9586.1 CockpitvitrificationforTAXISPORTII 9586.2 FuselageforTAXISPORTII 9586.3 WingpanelsforTAXISPORTII 9586.4 TailplaneandfinforTAXISPORTII 9586.5 LandinggearforTAXISPORTII 9586.7 GRPcowlpourTAXISPORTII 9586.8 WheelspatsforTAXISPORTII 9586.14 DecalsheetforTAXISPORTII

OrderNo. 4754 7953 4103

No.off 1 4 1

Order No. 9586.M WithOSMAXG55motor,shock absorbers,andpropeller

Installationof

thegasmotor

Specification Wingspanapprox. 1600 mm Hulllength,approx. 1190 mm All-upweight,approx. 2500 g Totalsurfacearea,approx. 47,54 dm Tailplanearea 9,0 dm Wingarea 39,54 dm

RC functions Rudderlinkedtotailwheel Elevators Ailerons Speedcontroller

Installationoftheelectricengine


24

POWER MODELS25

Model aircraft

RC electric model

CESSNA 172 SOrder No. 9595 Wingspan approx. 1675 mmOrder No. 9595 Almostreadytofly(ARTF)model Conventionalwoodconstruction Fuselage,wingparts,andtailplane pre-covered Wheels,smallparts,and accessoriesforrudderlinkage Recommended accessories Type ServoDS5391BB,MG,lose ServoC5077BB,lose MC-22HoTTComputersystem Replacement parts OrderNo. Description 9595.1 Canopy 9595.2 Fuselage 9595.3 Wings 9595.4 Elevator 9595.5 Train 9595.7 Motorcowl 9595.10 Rudder 9595.14 Decalsheet 9595.20 Joinertube OrderNo. 5166.LOSE 4103.LOSE 4759 No.off 1 7 1 The original Four-seatersportsaircraft Idealtrainingaircraft The model GRPenginebonnetandwheel covers GRP(glass-fiber-reinforcedplastic) Wingsremovablefortransport

RC functions Rudder Elevators Ailerons Airbrakes Enginethrottle

Cessnaemblems,logosandbodydesignsaretrademarks ofTextronInnovationInc.andareusedunderlicenseby GraupnerGmbH&Co.KG

Specification Wingspanapprox. 1675 Overalllength,approx. 1800 All-upweight,approx. 3450 Totalsurfacearea,approx. 46 Tailplanearea 8,6 Wingarea 37,4 Wingsection NACA2412

Recommendation for the propulsion mm mm g dm dm dm Motor Order No. O SMAXFSA-56inclusive silencer 2729 O SMAX46AX 2701 Propeller Order No. 1318.30.20 1318.28.15 Silencer Order No.

Markerlights

installedonth

ewingtips

2715.33


26

Power Models27

Model aircraft

RC electric model

JODEL ROBIN DR 400/180Order No. 9561 Wingspan about 2200 mmOrder No. 9561 Almost-ready-to-fly(ARTF)model Conventionalwoodconstruction Fuselage,wingshalves,andtailplane pre-coveredwithfoil Smallpartsandaccessoriesfor rudderlinkage Winghalves,tailplanehalves,and verticalstabiliserscanberemoved fortransport Recommendation for the propulsion Motor Drivebattery Propeller Order No. 1328.45.25 Seriesconnec- Silencer tioncable Order No. Order No. 2970.R Speedcontroller Order No. 7208 The original Four-seatersportsaircraft IdealforF-tow The model ARTF(almostreadytofly) GRP(glass-fiber-reinforcedplastic) Enginebonnetandwheelcovers Scale1:4

1318.45.25

2728.33

ForinstallationoftheRCcomponentsandassemblyofthe wingpanels,agenerousopeningisprovidedinthefuselage.

RC functions Rudder Elevators Ailerons Airbrakes Bowlandinggear Enginethrottle F-towcoupling

Recommended accessories Type ServoDS5491BB,MG ServoDS8417BB,MG MC-22HoTTComputersystem Replacement parts OrderNo. Description 9561.1 CanopyforJODEL 9561.2 FuselageforJODEL 9561.3 WingforJODEL 9561.4 TailplaneandfinforJODEL 9561.5 LandinggearforJODEL 9561.7 GRPcowlforJODEL 9561.8 GRPwheelspatsforJODEL 9561.14 DecalsheetforJODEL

OrderNo. 5165 5152 4759

No.off 8 1 1

Specification Wingspanapprox. 2200 mm Overalllength,approx. 1640 mm 7800 g All-upweight,approx. Totalsurfacearea,approx. 102,4 dm 84 dm Wingarea Tailplanesection 18,4

Theillustrationshowsthefullyassembledmodel

28

Power Models29

Order No. Order No. G RAUPNER 9752.5 COMPACT740Z 37V 7780 PetrolengineG 26 1903 OSMAX FS-200S 2728

1318.45.25

1903.33

Model aircraft

RC electric model helicopter

PICO STAR 1 GYRO REDOrder No. 92402 Rotor- 112 mmOrder No. 92402 Order No. 92403 Withthebuilt-ingyro,thePicoStar1 hasgreatindependentflyingstability andcanbecontrolledperfectlyafter justashortlearningphase.Everything youneedisincludedindelivery,sothe PicoStar1isreadytoflyassoonas youhavechargedtheLiPobattery. Freeflyingindoorhelicoptermodel withgyro Pre-assembledandreadytofly Infraredremotecontrolsystemwith threefunctions Themodelgetsitspowersupply fromaninstalledlithium-ion-polymer (LiPo)battery Powersupplyto thetransmittervia sixtypemignonAAdry-cell batteriesincludedindelivery ModelshouldbechargedviaUSB connectiontoaPCor,alternatively, viathetransmitter WithLEDlighting

PICO STAR 1 GYRO BLACKOrder No. 92403 Rotor- 112 mm

c Drivebatteryis

hargedviathe

transmitter

RC functions Pitchaxis Yaw Climb/drop

Completescopeofdeliverywithtransmitterandaccessories

Specification Fuselagewidth(excl.Rotor) Lengthexcl.rotor Height,approx. All-upweight,approx. Rotordiameter

24 133 65 16 112

mm mm mm g mm

Replacement parts OrderNo. Description 3426 Powerbattery(4pcs) Recommended accessories Type EnergySetChargerandbatteriesAA(12pcs.)

Withintegrat edLEDlights

OrderNo. 90130

No.off 1

30

Helicopter Models31

DerPicoStar1thesmallesthelicoptermodelinourproductrange. Thankstothebuilt-ingyrosystem,the ultralighthelicoptermodelhasgreat independentflyingstabilityandcan beflowneveninverysmallspaces.2 verybrightLEDsprovidesupportfor nightflightandalsomakeforagreat show.Thesoft,shortrotorbladesare extremelysturdyanddurable.After justashortlearningphase,themodel canbecontrolledreliablyvia3functions.Flighttimewithonebattery chargeisabout3-5minutes,andthe integratedbatterycanthenberechargedwithnoproblemviatheincluded USBcabletoaPCornotebook,orvia thetransmitterchargercable.

Model aircraft


NANO FIGHTER GYRO KHAKIOrder No. 92400 Rotor- 185 mmOrder No. 92400 Order No. 92401 Thankstothebuilt-ingyrosystem,the super-lightNanoFighterhasextremely goodindependentflyingstabilityand canbecontrolledperfectlyafterjusta shortlearningphase.Thedelivery includeseverythingyouneed,sothe NanoFighterisreadytoflyassoonas theLiPobatteryischarged. Free-flyingindoorhelicoptermodel withgyro Assembledandreadytofly Infraredremotecontrolsystemwith threefunctions Themodelgetsitspowersupply fromaninstalledlithium-ion-polymer (LiPo)battery Powersupplytothetransmittervia sixtypemignonAAdry-cell batteriesincludedindelivery Modelshouldbechargedviathe USBconnectiontothePC,or alternativelytothetransmitter WithLEDlights

NANO FIGHTER GYRO GREY/SILVEROrder No. 92401 Rotor- 185 mm

TheflightbatteryischargedviaUSBcabletothePC

94201NanoFighteringrey/silver

RC functions Roll Pitch Climb/drop Specification Fuselagewidth(excl.Rotor) Lengthexcl.rotor Height,approx. All-upweight,approx. Rotordiameter

94200NanoFighterinkhaki

With integrat

ed LED light

s

100 205 95 42 185

mm mm mm g mm

Recommended accessories Type EnergySetChargerandbatteriesAA(12pcs.)

OrderNo. 90130

No.off 1

Completescopeofdeliverywithtransmitterand accessories

Replacement parts OrderNo. Description 3426 Powerbattery(4pcs)

32

Helicopter Models33

Thankstothebuilt-ingyrosystem,the super-lightNanoFighterhas extremelygoodindependentflying stabilityandcanbeflowneveninthe tightestspaces.Theaggressive appearanceofthemilitaryvariantof theNanoStarseriesisunderscored evenfurtherinnightflightbythe2 verybrightLEDs.Thesoft,shortrotor bladesareextremelysturdyand long-lived.Afterjustashortlearning phase,themodelcanbecontrolled reliablyviathreefunctions.Flighttime withasinglebatterychargeisabout 4-6minutes,andrechargingis possiblewithnoproblemusingthe providedUSBcableviaPC, notebook,ortheintegrated transmitterchargercable.

Model aircraft


NANO STAR 2 GYROOrder No. 4409 Rotor- 195 mmOrder No. 4409 Free-flyingindoorhelicoptermodel withgyro Assembledandreadytofly Infraredremotecontrolsystemwith threefunctions Themodelgetsitspowersupply fromaninstalledlithium-ion-polymer (LiPo)battery Powersupplytothetransmittervia sixtypemignonAAdry-cellbatteriesincludedindelivery Modelshouldbechargedviathe USBconnectortothePC,oralternativelytothetransmitter

R/C systems (Includedindelivery),infrared,3functions

WithintegratedLEDlights

Recommended accessories Type EnergySetChargerandbatteriesAA(12pcs.) Specification Fuselagewidth(excl.Rotor) Lengthexcl.rotor Height,approx. All-upweight,approx. Rotordiameter 35 185 95 38 190 mm mm mm g mm Replacement parts OrderNo. Description 3426 Powerbattery(4pcs) 4409.3 rotorpartsforNANOSTAR2 4409.4 RotorbladesforNANOSTAR2

OrderNo. 90130

No.off 1

ia ryischargedv Theflightbatte thePC

USBcableto

RC functions Pitch Yaw Up/down

Availableinachoiceofyelloworred

34

Helicopter Models35

Theextremelylightmodeloffers greatstabilityforoperationindoors eveninsmallspaces Thesoft,shortrotorbladesare verysturdy Outstandingflightstabilitythanks totheintegratedgyro;canbemasteredafterjustashortlearning phase Controlviathreefunctions Flighttimewithonebatterycharge isabout4-6minutes Theflightbatteryischargedvia USBcabletothePC,notebook,or viatheintegratedtransmitterchargercable

Model aircraft


micro ECUREUIL 460Order No. 4485 Rotor- about 460 mmOrder No. 4485 Realistic,freeflyingindoorhelicopter model Assembled,readytofly,andalready flownin 2.4-GHzradioremotecontrolwith fourfunctionsincludedindelivery Built-inlighting:flashinglight,land spotlight Batterylowvoltagewarningbyblinkingbluelight Modelpowersupplyviarechargeablelithiumionpolymerbattery(LiPo battery),includedindelivery LiPoautomaticchargerfor12-Voperationandpowersupplyunitfor220 Vpoweroperationalsoincludedin delivery TransmitterpowersupplyviafourmignontypeAAdrycells,included Transmitteroperationwithrechargeablebatteriesispossible,acharging jackisalreadyinstalledinthetransmitter

Setincludes

Specification Fuselagewidth(excl.Rotor) Lengthexcl.rotor Height,approx. All-upweight,approx. Rotordiameter

90 460 270 405 460

mm mm mm g mm

RC functions Roll Pitchaxis Yaw Rotorthrust(rpms)Theillustrationshowsthefullyassembledmodel

Replacement parts OrderNo. Description 4490.09 Mainsadaptor 4484.01 Mainchassisandengins 4484.02 Smallpartsandbearing 4484.03 Rotorparts 4484.04 Rotorblades 4484.05 Swashplateandlinkage 4484.07 LiPobattery3/700 4484.08 LiPocharger 4484.10 Toprotorheadandshaft 4484.11 Batterywarning,3cells

36

Helicopter Models37

2,4 GHz

EcureuilAS350isa6-seatermultipurposehelicopterfromAerospatiale(nowEurocopter) Addsalargermodeltotheproven micro47indoorsystem Outstandingflightstability,canbe masteredafterjustashortlearning phase Twocoaxiallyarranged,counter-rotatingrotors,sonorearrotorisrequired Themodelwascreatedwiththe friendlypermissionandsupportof EUROCOPTER(anEADSCompany)

Model aircraft

RC racing boat

BAZILLUSOrder No. 8609 Hull length about 230 mmOrder No. 8609 Ready-to-Run(RTR)model Completelyassembledandready-torunMicroracingboat 2.4GHzremotecontrolwithmitfrequencyhoppingsystem Built-in,water-cooledSPEED320 motorwithhydrodrive Turnfinsonbothsidesforbetterbehaviourincurves Doublecockpitcanopyforabetter seal Applieddecals Modelisdeliveredinthreeassorted colours Deliveryincludes:instructionsinGerman,English,andFrench,completelyassembledmodel,transmitter, drivebattery,charger,transmitter battery,shipstand,smallparts RTR(ReadyToRun) TheBAZILLUSistheMicroracing boatforfastfunonthewater Thehandysizemeansitcanbetakenanywherewithnoproblem Afterthedrivebatteryischarged andthetransmitterbatteryisin place,themodelisreadytorun Thankstothemodern2.4-GHz technology,itisevenpossibleto runseveralmodelsinparallel Themodelisdeliveredtodealersin anassortmentofcolours:white, red,andyellow

R TR

Specification Overalllength,approx. Hulllength,approx. Beam,approx. Totaldisplacement

FHSS 2,4 GHz logie Techno270 230 70 172 mm mm mm g RC functions Rudder Forwardwithproportionalcontrol

Recommended accessories Type Primebattery,block9V Replacement parts OrderNo. Description 8609.5 Ruddersystemandturnfin 8609.6 Boatpropeller

OrderNo. 98865

No.off 1

Setcontents(drivebatterynotshown)

38

RACING BOATS39

Boat models

RC Rescue boat

MULTI JET BOATOrder No. 2155 Hull length about 660 mmOrder No. 2155 New kit developed using state-ofthe-art design methods on a 3DCAD system Ideal model for model builders with little basic knowledge of ship model building Hull, deck, and superstructure of vacuum-moulded ABS, CNC-machined Many superstructure, deck parts, railings, and other parts of laser-cut ABS Set of fittings included, consisting of injection moulded parts, such as the mast, aerials, lights, tyfon, bollard, anchor, lifesavers, and lip Extensive set of multilingual decals can be used for various designs. This enables the model builders to select exactly the designs they want. Included in delivery: vacuum-moulded ABS parts for hull, decks, superstructure, covering, and life raft, laser-cut wood parts for interior braces, railings, and other small parts, complete set of fittings, two jet drives, shaft couplings, parts for rudder linkage, wires, hook-and-loop strip, small parts RC functions Rudder Speed control Operation of reversing flap Special functions such as lighting and sound module as desired Specification Scale Overall length, approx. Beam, approx. Overall height approx. All-up weight, approx. 1:25 665 225 325 2100 The model TheMULTI-JETBOATisbasedon aSwedishpilotboat,whichisalso usedasasearescueboat.Indevelopingthemodel,however,theoriginalwasusedonlyasasourceof ideas,sothatthemodelbuilders canimplementtheirownideasin theirmodels.Asaresult,themodel canbedoneasmanykindsofcontrolservices(coastguard,police,et cetera).Thisisalsofacilitatedby themultilingualdecalsheet. TheCNC-machinedvacuum-mouldedABSpartsmakeitsuitable evenforlesspracticedmodelbuilders. Therailingsaremadeof2mmlaser-cutABS,savingyouthetrouble ofsolderingthemtogetherfromwires. Thewindowscomestandardas completedecals,thedecalsheet alsoincludessomeseparatedecals ofonlythewindowframes. Thedualjetdriveprovidesimpressiveoperatingperformance. Themodelhasadequatespacefor installationoflighting(orderno. 2381)orasoundmodule(orderno. 2382.S).

mm mm mm g

The illustrations show the prototype model equipped with accessories

Replacement parts Order No. Description 2155.2 Hull, deck and cover 2155.3 Superstructure

Recommended accessories Type X-408 COMPUTERSYSTEM 40 MHz SPEED CONTROLLER PICO 60 SERVO C 577 lose Receiver battery 4NH-2000 RX RTU JR plug SPEED 600 RACE 7,2 V GM Power Pack 36006N-3600 7,2V G2 Condensor, large Highly flexible copper litzwire Parallel cable G2 Graupner gold contact

Order No. 4729 7176 4101.LOSE 2498.4 6370 2490.6 3588 3389 3061 2989

No. off 1 1 1 1 2 2 1 1 1 1

40

Motor Boats41

Boat models

RC sailing yachts

Racing MICRO MAGIC RTROrder No. 2014.200 Hull length about 535 mmOrder No. 2014.200 Almost-Ready-to-Run (ARTR) Model The racing MICRO MAGIC RTR was designed to reflect developments on the MICRO MAGIC racing scene, and in its standard form constitutes a version intended for ambitious regatta work Hull, deck, hatch cover, and keel mast socket are made of vacuummmoulded glass-fibre-reinforced plastic and are pre-assembled and bonded All RC components are already installed in the hull The 40 MHz (FM) hand transmitter comes with joysticks optimised for sailing The rig is pre-assembled to such a degree that it can be set up quickly The sails have to be mounted, because they are packed separately to avoid crinkling The keel fin and rudder are injectionmoulded in glass-fibre reinforced plastic for outstanding stiffness The slightly reduced areas and slim profile of the fin and rudder result in reduced drag Factory-made, pre-sewn sail suit of white, water-repellent, lightweight sail fabric Lightweight but stable rig is made of CFRP tubing. The boat features a one-piece mast in order to obtain a strong rig without the need for a spreader The rig consists of the newly developed high-quality plastic fittings that are also used in the kit The boat has a pre-installed jib trimming servo, so that you can fine-tune the sail trim while the boat is running The whole sail adjustment system is low in friction thanks to the double control arm and dual return pulleys The high degree of pre-assembly means you can finish the model quickly Pre-painted hull, keel fin, and rudder with factory-applied decals Set contents: vacuum-moulded ABS hull, deck, hatch, and two-part keel mast socket, laser-cut wooden internal fittings and boatstand, glass-fibre reinforced plastic rudder and keel fin, cast keel ballast mounted on the keel fin, various injection-moulded plastic parts, carbon fibre tubing for mast and booms, ready-made sail suit, polyester cord, small items, decal sheet, instructions in German, English and French ARTR(AlmostReadyToRun) WiththeMICROMAGICRTR,the familiarracingMICROMAGICis alsoavailableasapre-assembled model Inspiteofitsextraordinarillysmall size,theracingMICROMAGICisa high-qualityregattamodelyacht withalltheusualcontrolfunctions TheRTRvariantmeetsthetechnicalrequirementsoftheGermanregattascene TheracingMICROMAGICissuitableforlighttomoderatewinds ThecompactsizeoftheracingMICROMAGICmakesiteasyto transportandthetheidealchoice foruseonholiday Fortips,moreinformation,andregattadatesfortheracingMICRO MAGIC,pleasevisitwww.micromagic.info

Specification Overall length, approx. Beam, approx. Overall height approx. Sail area (cm2) All-up weight, approx.

535 180 980 1450 860

mm mm mm cm g

w

gic.info .microma wwRC functions Rudder Sail control Jib sheet trim

Recommended accessories Type Power battery (4 pcs) Replacement parts Order No. Description 2014.2 Keel fin 2014.3 Rudder 2014.4 Keel ballast

Order No. 3426

No. off 3

The illustrations show the assembled model.

42

RC sailing yaChts43

Boat models

RC electric touring cars

PORSCHE 911 GT2Order No. 92000 Scale 1:16Order No. 92000 Order No. 92001 Order No. 92002 Order No. 92003 The new Junior Line Scale-Cars on a scale of 1:16 are the ideal first RC car. The vehicles are easy to master, extremely robust, and, thanks to the turbo function, reach speed of up to 11 km/h. That makes them suitable for indoors or out. The true-scale body and illuminated headlights and taillights create a great look. For operation all you need are eight regular or rechargeable AA batteries. Features: Completely pre-assembled readyto-run model Built-in 40-Mhz remote control system Detailed body With headlights and taillights Rear wheel drive with differential 2 speeds with turbo function Independent suspension in front Rear suspension Instructions in German / English / French Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance 1:16 265 125 85 420 160 40 10

MERCEDES-BENZ SLS AMGOrder No. 92001 Scale 1:16

AUDI A4 DTMOrder No. 92002 Scale 1:16

NISSAN GT-R SUPER GTOrder No. 92003 Scale 1:16Allmodelsaremanufacturedunder licensefromtherespectiveauto manufacturers. Foroperationyouneedonly8AA rechargeablemignonbatteriesor8 regularbatteries.Thenletthefun beginwiththisverytrue-to-detailand low-pricedmodel.

minated With illu ts and headligh hts taillig92002

92000

92001

RC functions Forward / turbo speed forward Forward right / left Stop Reverse Reverse right/left

92003 Recommended accessories Type Power battery (4 pcs) Energy Set Charger and batteries AA (12pcs.) Order No. 3426 90130 No. off 2 1

44

RC On-ROad mOdel45

mm mm mm g mm mm mm

Car models


PORSCHE 911 GT2 MINI COOPER S TOYOTA FJ CRUISEROrder No. 92010 scale 1:28Order No. 92010 Order No. 92010 Order No. 92010 Order No. 92010 Order No. 92010 The new Junior Line Scale-Cars on a scale of 1:28 are the ideal first RC car. The vehicles are easy to master, extremely robust, and, thanks to the turbo function, reach speed of up to 7 km/h. That makes them suitable for indoors or out. The true-scale body and illuminated headlights and taillights create a great look. For operation all you need are four (92012 six) regular or rechargeable AA batteries. Features Completely pre-assembled readyto-run model Built-in 27-Mhz remote control system Detailed body With headlights and taillights Rear wheel drive with differential Independent suspension in front Swing axle rear suspension Instructions in German / English / French

PEUGEOT 207Order No. 92013 Scale 1:28

BMW 320si WTCCOrder No. 92014 Scale 1:28Allmodelsaremanufacturedunder licensefromtherespectiveauto manufacturers. Foroperationyouneedonly4AA rechargeablemignonbatteriesor4 regularbatteries.Thenletthefun beginwiththisverytrue-to-detailand low-pricedmodels.

Order No. 92011 Scale 1:28

Order No. 92012 Scale 1:28

92010

92012

ated With illumin and headlights taillights92013 92014 Specification Scale Overall length, approx. Width approx. Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance

1:28 145 - 164 65 52 - 60 180 - 200 88 - 100 25 4

mm mm mm g mm mm mm

92011 RC functions Forward Forward right / left Stop Reverse Reverse right/left Recommended accessories Type Power battery (4 pcs) Energy Set Charger and batteries AA (12pcs.)

Order No. 3426 90130

No. off 1 1

46

RC On-ROad mOdel47

Car models

RC-Off-Road-Short-Course-Truck

RC Off-Road Monster Truck

BAJA SC XXS 4WDOrder No. 90122 Electric Off-Road Short Course Truck, scale 1:24Order No. 90122 BAJA SC XXS 4WD RTR Preassembled, ready-to-run 4WD chassis with all-wheel drive and 2 bevel gear differentials GM-Racing XG-2 RC system with steering servo and controller / receiver unit installed Digital proportional remote control; continuously variable control of steering and gas Powerful electric drive system with RC131 motor 4 shock absorbers 4 cardan drive shafts for power transmission to all 4 wheels Painted body (available in 2 different colors) Additional featuresHigh-Grip offroad tyres Central cardan drive shaft Independent suspension with double transverse arms on front and rear axles Robust plastic chassis, shock absorber bridges, and transverse control arms 3 different pinions included Many upgrade parts available, such as oil-filled shock absorbers, metal cardan shafts, or adjustable trackrods Specification Scale 1:24 Overall length, approx. 160 - 167 Width 121 - 130 Height, approx. 72 - 75 Wheelbase approx. 102 Ground clearance 15 Electric motor RC 131

MONSTER FLASH XXS 4WDOrder No. 90123 Electric Off-Road Monster Truck, scale 1:24Order No. 90123 MONSTER FLASH XXS 4WD RTRPreassembled, ready-to-run 4WD chassis with all-wheel drive and 2 bevel gear differentials GM-Racing XG-2 RC system with steering servo and controller / receiver unit installed Digital proportional remote control; continuously variable control of steering and gas Powerful electric drive system with RC131 motor 4 shock absorbers 4 cardan drive shafts for power transmission to all 4 wheels Painted body (available in 2 different colors) RC functions Right / left Forward / brake / reverse Replacement parts Under order number 90120.XX in the price list or in the Online-Shop at www. graupner.de Remote control Included with delivery Additional featuresHigh-Grip offroad tyres Central cardan drive shaft Independent suspension with double transverse arms on front and rear axles Robust plastic chassis, shock absorber bridges, and transverse control arms 3 different pinions included Many upgrade parts available, such as oil-filled shock absorbers, metal cardan shafts, or adjustable trackrods Specification Scale 1:24 Overall length, approx. 160 - 167 Width 121 - 130 Height, approx. 72 - 75 Wheelbase approx. 102 Ground clearance 15 Electric motor RC 131 TheGM-RacingBAJAShortCourse XXS4WDTruckonascaleof1:24guaranteesunlimitedridingfuninside andout.Builtlikeafull-sizedbuggy, withindependentsuspension,hightractionknobbyoffroadtyres,and highgroundclearancemakeitperfect foranyterrain. Withitspowerfulelectricmotor,the modelreachesupto30km/hwithextremelylongrunningtimes.

Recommended accessories Order No. No. off Type Power battery 3426 3 (4 pcs) Energy Set 90130 1 Charger and batteries AA (12pcs.)

Recommended accessories Order No. No. off Type Power battery 3426 3 (4 pcs) Energy Set 90130 1 Charger and batteries AA (12pcs.)

Themodelisequippedwithahighquality,continuouslyvariableGM-RacingXG-2remotecontrolsystem.For optimalspeed-indoorsorout-3differentgearreductionsareincluded.

RC functions Right / left Forward / brake / reverse Replacement parts Under order number 90120.XX in the price list or in the Online-Shop at www.graupner.de

Requires4AArechargeablebatteries withmatchingchargerforthevehicle and8AAbatteriesforthetransmitter.

Remote control Included with delivery

50

Off-ROad mOdels51

mm mm mm mm mm

mm mm mm mm mm

Car models

RC Off-Road Buggy

RC Off-Road Truggy

FLASH XXS 4WD RTROrder No. 90120 Electrick Off-Road Buggy, scale 1:24Order No. 90120 FLASH XXS 4WD RTRPreassembled, ready-to-run 4WD chassis with all-wheel drive and 2 bevel gear differentials GM-Racing XG-2 RC system with steering servo and controller / receiver unit installed Digital proportional remote control; continuously variable control of steering and gas Powerful electric drive system with RC131 motor 4 shock absorbers 4 cardan drive shafts for power transmission to all 4 wheels Painted body (available in 2 different colors) Specification Scale Overall length, approx. Width Height, approx. Wheelbase approx. Ground clearance Electric motor 1:24 160 - 167 121 - 130 72 - 75 102 15 RC 131 Additional featuresHigh-Grip offroad tyres Central cardan drive shaft Independent suspension with double transverse arms on front and rear axles Robust plastic chassis, shock absorber bridges, and transverse control arms 3 different pinions included Many upgrade parts available, such as oil-filled shock absorbers, metal cardan shafts, or adjustable trackrods

LEOPARD XXS 4WD RTROrder No. 90121 Electric Off-Road Truggy, scale 1:24TheGM-RacingFLASHXXS4WD Buggyonascaleof1:24guarantees unlimitedridingfuninsideandout. Builtlikeafull-sizedbuggy,with independentsuspension,hightractionknobbyoffroadtyres,and highgroundclearancemakeitperfect foranyterrain. Withitspowerfulelectricmotor,the modelreachesupto30km/hwith extremelylongrunningtimes.

Themodelisequippedwithahighquality,continuouslyvariableGM-RacingXG-2remotecontrolsystem.For optimalspeed-indoorsorout-3differentgearreductionsareincluded.

mm mm mm mm mm


RC functions Right / left Forward / brake / reverse

Recommended accessories Type Order No. No. off Power battery 3426 3 (4 pcs) Energy Set 90130 1 Charger and batteries AA (12pcs.)

Order No. 90121 LEOPARD XXS 4WD RTR Preassembled, ready-to-run 4WD chassis with all-wheel drive and 2 bevel gear differentials GM-Racing XG-2 RC system with steering servo and controller / receiver unit installed Digital proportional remote control; continuously variable control of steering and gas Powerful electric drive system with RC131 motor 4 shock absorbers 4 cardan drive shafts for power transmission to all 4 wheels Painted body (available in 2 different colors) RC functions Right / left Forward / brake / reverse Specification Scale 1:24 Overall length, approx. 160 - 167 Width 121 - 130 Height, approx. 72 - 75 Wheelbase approx. 102 Ground clearance 15 Electric motor RC 131

Requires4AArechargeablebatteries withmatchingchargerforthevehicle and8AAbatteriesforthetransmitter.

Additional featuresHigh-Grip offroad tyres Central cardan drive shaft Independent suspension with double transverse arms on front and rear axles Robust plastic chassis, shock absorber bridges, and transverse control arms 3 different pinions included Many upgrade parts available, such as oil-filled shock absorbers, metal cardan shafts, or adjustable trackrods

Replacement parts Under order number 90120.XX in the price list or in the Online-Shop at www.graupner.de

mm mm mm mm mm

Recommended accessories Type Order No. No. off Power battery 3426 3 (4 pcs) Energy Set 90130 1 Charger and batteries AA (12pcs.)

Replacement parts Under order number 90120.XX in the price list or in the Online-Shop at www. graupner.de

50

Off-ROad mOdels51


Car models

RC car accessories Upgrade parts and special accessories XXS modells

Shock absorber, aluminium, (4 pcs.) Order No. 90120.100

Tuning motor RC 180 Order No. 90120.101

Ball bearing set XXS-S series (14 pcs.) Order No. 90120.102

Shock absorber bridge, aluminium, front/rear (2 pcs.) Order No. 90120.103

Suspension, aluminium, front (4 pcs.) Order No. 90120.112

Wheel carrier, aluminium, rear (1 pair) Order No. 90120.113

Car body for LEOPARD XXS silver/ blue Order No. 90120.31

Car body for LEOPARD XXS black/ red Order No. 90120.32

Transverse control arm, aluminium, front/rear (2 pcs.) Order No. 90120.104

Motor heat sink, aluminium Order No. 90120.105

Upper transverse control arm, front adjustable (2 pcs.) Order No. 90120.106

Upper transverse control arm, rear adjustable (2 pcs.) Order No. 90120.107

Car body for MONSTER FLASH XXS, black/blue Order No. 90120.33

Car body for MONSTER FLASH XXS, black/red Order No. 90120.34

Car body for MONSTER FLASH XXS black/red Order No. 90120.35

Car body for MONSTER FLASH black/blue Order No. 90120.36

Differential steel gates (2 pairs) Order No. 90120.108

Metal articulated shaft, front (1 pair) Order No. 90120.109

Metal articulated shaft, rear (1 pair) Order No. 90120.110

Differential complete Order No. 90120.111

Car body for BAJA SC XXS black/ red Order No. 90120.37

Car body for BAJA SC XXS blue/ yellow Order No. 90120.38

Washers for car body (12 pcs.) Order No. 90120.39

Energy Set Charger and batteries AA (12pcs.) Order No. 90130

52

53

Car models

RC Off-Road Buggy

ROADFIGHTER BUGGY 2WD RTR, scale 1:10, 2.4GHzOrder No. 90168.RTR Electric off-road Truggy 2WD scale 1:10Order No. 90168.RTR The newly developed GM Racing Roadfighter Buggy is the perfect vehicle for beginners in the RC car area. Thanks to the powerful motor, the model reaches high speed. The low-loss, low-service rear drive is optimal for drifts and wheelies. With its big wheels and high ground clearance, it can take on any terrain. The Roadfighter Buggy is equipped standard with a high-quality GM Racing XG-6i 2.0 Sport-Spec 2.4 GHz remote control system and is 99% pre-assembled. All you need are an engine battery and rechargeable or regular batteries for the remote control. Pre-assembled ready-to-run vehicle with rear-wheel drive Service-friendly, sturdy construction Bevel gear differential on the rear axle GM-Racing XG-6i 2.0 Sport-Spec 2.4 GHz RC system with control servo and receiver installed and connected. The control rods are pre-adjusted Powerful No. 540 motor and electronic speed controller 4 adjustable aluminium oil-filled shock absorbers Steel drive shafts on the rear axle Comes complete with high-quality ball bearings Painted Buggy body Additional features Service-friendly, sturdy construction One-piece tub CFRP chassis. Adjustable camber and toe-in by means of right/left screw rods Stable protective frame for the motor Completely encapsulated drive mechanism Adjustable slip coupling Specification Scale 1:10 Overall length, approx. 395 mm Width 245 mm Height, approx. 145 mm All-up weight RTR, approx. 1450 g Wheelbase approx. 265 mm Wheel diameter 81-85 mm Ground clearance 35 mm Reduction gear unit 1:8,8 Electric motor 540 AnaffordablestartintheareaofRC carsisthenewlydevelopedGMRacingRoadfighterBuggy.Nevertheless,itofferseverythingthatmakes upahigh-qualityvehicle:oil-filled shockabsorbers,ballbearings,differential,andapowerfulmotorforgreat drivingfun.ThehighgroundclearancemeansthattheRoadfighter 2WDBuggycaneasilyoperateinany terrain.Thehigh-qualityGM-Racing XG-6i2.0Sport-Spec2.4GHzremote controlensuresthatyoualwayshave perfectcontrol.

Steel drive shafts Multi-part tub glass-fibre-reinforced-plastic chassis

Large rear spoiler

Stable protective frame for the motor Steering servo Electric motor Adjustable camber and toe-in by means of right/left screw rods

Adjustable slip clutch Completely encapsulated drive mechanism

Front axle struts

Large High-Grip offroad tyres Adjustable oil-filled shock absorbers

h RC RTR witRemote control system included in delivery

Spare parts Available under order nos. 90166.XX and 90168.XX in the price list or in the Online Shop at www.graupner.de RC functions Right/left Forward/brake/reverse

Recommended accessories Type Roadfighter Brushless conversion kit /engine/controller Power battery (4 pcs) Mignon ECO-Power 1.2V/800 mAh GM Power Pack 7.2V/3600 mAh JP plug MINI LADER 3

Order No. 97161 3426 3621 98900 6424

No. off 1 2 8 1 1

54

Off-ROad mOdels55

Car models

RC Off-Road Truggy

Order No. 90166.RTR Electric off-road Truggy 2WD scale 1:10Order No. 90166.RTR The newly developed GM Racing Roadfighter ST is the perfect vehicle for beginners in the RC car area. Thanks to the powerful motor, the model reaches high speed. The low-loss, low-service rear drive is optimal for drifts and wheelies. With its big wheels and high ground clearance, it can take on any terrain. The Roadfighter ST is equipped standard with a high-quality GM Racing XG-6i 2.0 Sport-Spec 2.4 GHz remote control system and is 99% pre-assembled. All you need are an engine battery and rechargeable or regular batteries for the remote control. Pre-assembled ready-to-run vehicle with rear-wheel drive Bevel gear differential on the rear axle GM-Racing XG-6i 2.0 Sport-Spec 2.4 GHz RC system with control servo and receiver installed and connected. The control rods are pre-adjusted Powerful No. 540 motor and electronic speed controller 4 adjustable aluminium oil-filled shock absorbers Steel drive shafts on the rear axle Comes complete with high-quality ball bearings Painted body Additional features Service-friendly, sturdy construction One-piece tub CFRP chassis. Adjustable camber and toe-in by means of right/left screw rods Stable protective frame for the motor Completely encapsulated drive mechanism Adjustable slip coupling Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance Reduction gear unit Electric motor 1:10 440 325 160 1495 285 106 50 8.8:1 540

Multi-part tub glass-fibre-reinforced-plastic chassis

Completely encapsulated drive mechanism

mm mm mm g mm mm mm

Stable protective frame for the motor Adjustable camber and toe-in by means of right/left screw rods Electric motor

Adjustable slip clutch

Front axle with struts

Steering servo Adjustable aluminium oil-filled shock absorbers

Steel drive shafts

h RC RTR wit

Large High-Grip offroad tyres The figure shows th emodel with brushless tuning drive system

Spare parts Available under order no. 90166.XX in the price list or in the Online Shop at www.graupner.de RC functions Right/left Forward/brake/reverse

Remote control system included in delivery

Recommended accessories Type Roadfighter Brushless conversion kit /engine/controller MINI LADER 3 GM Power Pack 7.2V/3600 mAh JP plug Mignon ECO-Power 1.2V/800 mAh Power battery (4 pcs)

Order No. 97161 6424 98900 3621 3426

No. off 1 1 1 8 2

56

Off- ROad MOdelle57

AnaffordablestartintheareaofRC carsisthenewlydevelopedGM RacingRoadfighterSTStadiumTruck. Nevertheless,itofferseverythingthat makesupahigh-qualityvehicle: aluminiumoil-filledshockabsorbers, ballbearings,differential,anda powerfulmotorforgreatdrivingfun. Thehighgroundclearancemeans thattheRoadfighterSTcaneasily operateinanyterrain.Thehigh-qualityGM-RacingXG-6i2.0Sport-Spec 2.4GHzremotecontrolensuresthat youalwayshaveperfectcontrol.

Car models

ROADFIGHTER ST SPORT 2WD STADIUM TRUCK scale 1:10

RC Off-Road Buggy

ROADFIGHTER SC 2WD SHORT COURSE RTR, scale 1:10Order No. 90167.RTR Electric Off-Road Short Course 2WD scale 1:10Order No. 90167.RTR The newly developed GM Racing Roadfighter SC Short Course Truckis the perfect vehicle for beginners in the RC car area. Thanks to the powerful motor, the model reaches high speed. The low-loss, low service rear drive is optimal for drifts and wheelies. With its big wheels and high ground clearance, it can take on any terrain. The Roadfighter SC is equipped standard with a high-quality GM Racing XG-6i 2.0 Sport-Spec 2.4 GHz remote control system and is 99% preassembled. All you need are a drive battery along with rechargeable or regular batteries for the remote control. Preassembled readyto-run vehicle with rear-wheel drive Bevel gear differential on the rear axle. GM-Racing XG-6i 2.0 Sport-Spec 2.4 GHz RC system with steering servo and receiver installed and connected. The steering linkage is preadjusted Powerful No. 540 motor and electronic speed controller 4 adjustable oil-filled shock absorbers. Steel drive shafts on the rear axle Comes complete with high-quality ball bearings Painted body Additional features Service-friendly, sturdy construction One-piece GRP tub chassis Adjustable camber and toe-in by means of right/left screw rods Stable protective frame for the motor Completely encapsulated drive mechanism Adjustable slip clutch Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance Reduction gear unit Electric motor 1:10 530 250 170 1600 285 95 40 1:8,8 540Multi-part tub glass-fibre-reinforced-plastic chassis Ram protection front, rear, and sides Completely encapsulated drive mechanism

Adjustable camber and toe-in by means of right/left screw rods

Stable protective frame for the motor

Electric motor

Steering servo Steel drive shafts Adjustable oil-filled shock absorbers Large High-Grip off-road tyres

Adjustable slip clutch

Spare parts Available under order nos. 90166.XX and 90167.XX in the price list or in the Online Shop at www.graupner.de RC functions Right/left Forward/brake/reverse

Recommended accessories Type Roadfighter Brushless conversion kit /engine/controller Power battery (4 pcs) Mignon ECO-Power 1.2V/800 mAh GM Power Pack 7.2V/3600 mAh JP plug MINI LADER 3

Order No. 97161 3426 3621 98900 6424

No. off 1 2 8 1 1

58

Off-ROad mOdels59

mm mm mm g mm mm mm

AnaffordablestartintheareaofRC carsisthenewlydevelopedGM RacingRoadfighterSCShortCourse Truck.Nevertheless,itoffers everythingthatmakesupahighqualityvehicle:aluminiumoil-filled shockabsorbers,ballbearings, differential,andapowerfulmotorfor greatdrivingfun.Thehighground clearance meansthattheRoadfighterSCcan easilyoperateinanyterrain.ThehighqualityGM-RacingXG-6i2.0SportSpec2.4GHzremotecontrolensures thatyoualwayshaveperfectcontrol.

Car models

RC-Punisher-Crawler

PUNISHER CRAWLER 4WDS RTR scale 1:10Order No. 90140.RTR Electric Crawler 4WDS, scale 1:10Order No. 90140.RTR Rock crawling is an extreme form of off-road sport with specially modified vehicles. The extraordinarily high ground clearance and extreme axle lift let you conquer nearly any terrain. The PUNISHER is the powerful small version of this vehicle. With all-wheel drive and two RC390 motors, plus the new all-wheel steering and 4 different steering modes, it can be moved with extreme precision and easily overcome obstacles. The PUNISHER crawler comes standard with a new GM-Racing 3-channel crawler FM remote control with four steering modes that can be switched at the transmitter and is 99% preassembled. All you need to get started are the appropriated batteries for the remote control and a matching charger. The drive battery pack is included. Preassembled 4WDS chassis with all-wheel drive via two RC390 motors All-wheel drive with 4 steering modes, switchable at the transmitter Rigid axles for the best driving performance GM-Racing 27-MHz RC system with steering servos and receiver installed and connected Steering linkage is pre-adjusted Powerful RC390 motors on the front and rear axles along with the matching speed controllers 4 high-quality oil-filled shock absorbers Sturdy aluminium chassis and chassis braches, red anodised Painted body with decals applied Additional features Fully equipped with high-quality ballraces High-Grip crawler tyres with aluminium bead lock rings Rigid axle front and rear Adjustable ground clearance Powerful 6-kg steering servos on front and rear axles Specification Scale Overall length, approx. Width Height, approx. Wheelbase approx. Wheel diameter Reduction gear unit Electric motor 1:10 450 268 148 320 130 1:38,6 RC 390 4WDS steering ThePunisherCrawler4WDShasa uniqueandpatentedall-wheelsteeringsystem.Asshowninthegraphic below,theaxlescanbecontrolledvariablyfromtheremotecontrolunitvia 2servos.Thisprovidesmaximummanoeuvrability. Mode1:Steeringf+rparallel Mode2:Steeringrear Mode3:Steeringfront Mode4:All-wheelsteering

Remote control unit included in delivery

90140.RTR with black body

RC functions Right/left Forward/reverse All-wheel drive, 4 modes

Spare parts Available under order no. 90140.XX in the price list or in the Online Shop at www.graupner.de

Recommended accessories Type MINI LADER 3 Power battery (4 pcs) Battery NiMH 1N-2000 1.2V RTU Mignon AA(4 pcs.)

Order No. 6424 3426 2498

No. off 1 2 2

60

Off-ROad mOdels61

mm mm mm mm mm

Car models

RC-Off-Road-Monster-Truck

LOW RIDER MONSTER TRUCK 4WD RTROrder No. 90163.RTR Electric Off-Road Monster Truck, scale 1:10Order No. 90163.RTR The Low Rider Monstertruck is a hightech model on a scale of 1:10. Whether on or off the road, its large wheels and enormous ground clearance make it the ideal fun model for any kind of terrain. The powerful electric motor and all-wheel drive ensure extraordinary driving performance. It comes standard with a high-quality GM-Racing XG-6i 2.0 FHSS SportSpec 2.4 GHz-remote control system and a powerful electric motor and is 99% preassembled. Preassembled, ready-to-run 4WD chassis Swing axles with steel bevel-gear differentials Telescoping-type drive shafts for power transmission to all 4 wheels Side plates and braces of high-quality anodised aluminium GM-Racing XG-6i 2.0 FHSS SportSpec 2.4 GHz RC system with steering servo and receiver unit installed and connected Powerful 550 motor and electronic speed controller 4 adjustable aluminium oil-filled shock absorbers. 5-spoke monster truck rims with semi-pneumatic off-road tyres Completely equipped with ballraces Adjustable toe-in Painted and glued monster truck body Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Ground clearance Electric motor 1:10 450 325 225 2600 50-100 550Battery compartment Cardan drive shaft Optional all-wheel steering kit available

Oil-filled shock absorbers Steering servo Rough-tread, air-filled tires

Aluminium steering arms On/off switch Electric motor

5-spoke rims

Spare parts Available under order no. 90165.XX and 90163.XX in the price list or in the Online Shop at www.graupner.de RC functions Right/left Forward/brake/reverse

Recommended accessories Type Mignon ECO-Power 1.2V/800 mAh Power battery (4 pcs) GM Power Pack 7.2V/3600 mAh JP plug MINI LADER 3

Order No. 3621 3426 98900 6424

No. off 8 2 1 1

62

Off-ROad mOdels63

mm mm mm g mm

Electronic speed controller

TheLowRiderMonsterTruck4WD RTRisacombinationofcrawlerand monstertruck.Therelativelyslow-goingmodelisanidealbeginersmodel forplayingintheyard,gravelpit,or onthenearestballfield.Thepermanentall-wheeldriveandveryhigh groundclearanceenableittomaster nearlyanyterrain.Runningtimeper batterychargeis15-30minutes.

Car models


FLASH 3.0 Brushless RACE Buggy 4WD RTR, scale 1:8Order No. 90172.RTR GM Racing Flash 3.0 Race RTROrder No. 90172.RTR The newly developed Short Course Flash 3.0 combines the enormous performance of a 1:8 gas model with the advantages of an electric model. Unique for this price class is the highquality equipment, including the red anodised 17-mm Big Bore aluminium shock absorbers, machined chassis braces, or shock absorber bridges, all of which make the Short Course Flash a real racer. It comes standard with a high-quality GM-Racing XG-6i SportSpec 2.4-GHz remote control system and a powerful brushless motor, and it is 99% pre-assembled. All you need are the drive battery as well as rechargeable or regular batteries for the remote control system.Factory-assembled 4-WD chassis with four-wheel drive and three bevel gear differentials Centre drive with centre for the best running characteristics Optimised motor position in comparison to the nitro version for the best running and jumping behavior GM-Racing XG-6i Sport-Spec 2.4GHz RC system with steering servo and receiver installed and connected Steering and throttle linkages already adjusted Powerful brushless operation with motor (about 2 KW) and matching 120 A brushless controller Four high-quality, 17-mm, adjustable aluminium Big Bore oil-filled shock absorbers CVD drive shafts for power transmission to the front wheels Painted polycarbonate body shell Sturdy machined aluminium shock absorber bridges, chassis braces, and front steering lever red anodised Additional Features Fully equipped with high-quality ballraces High-grip Rally Game tyres fully bonded and pre-installed on the rims Metal main gear wheel, idler gear, and engine pinion Independent suspension with double transverse arms on front and rear axles Transverse stabiliser bars on front and rear axles Sturdy 3-mm aluminium chassis Adjustable castor range of 17 - 24 on the front axle Closed RC box for receiver Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase adjustable Ground clearance Reduction gear unit Electric motor 1:8 530 300 180 3400 322-326 70 10.1:1 Brushless TheGMRacingShortCourseis basedontheFlash3.0Brushless RaceBuggyandistheperfectfirst stepintotheworldof1:8-scaleelectricbuggies.Thetremendousperformanceandoff-roadcapabilityof1:8 off-roadmodelscannowbeexperiencedwithelectricpropulsionaswell. TheGM-RacingShortCourseBrushlessRaceroffershigh-qualitycompetitiontechnologyatanaffordable price.Numerousmachinedaluminium partsprovidethenecessarystability evenunderthetoughestconditions. Togetstartedallyouneedisa2-cell rechargeablebatterypack.A3-cell LiPobatteryisenoughtomatchthe performanceofacompetitiongasenginebuggy,andwithoutthealltheracketandfumes.Ifthatisstillnot enoughpowerforyou,youcanuse4 LiPocellstorampupthepowerand reachspeedsofover100km/hwith additionalwearandtear,however.

Transverse stabiliser bars on front and rear axles

Brushless motor

Independent suspension with double transverse arms on front and rear axles On / Off switch Linkage with adjustable Ackermann Big Bore oil-filled shock absorbers

rox. 50km/h st 7.4V app 5km/h Speedte 7 11.1V approx. . 100km/h x 14.8V appro

Remote control included with deliveryRight-hand / left-hand threaded trackrods

Dust-protected receiver box Universal battery box for hook-and-loop or clip attachment

Brushless speed controller 120A

Mid-mounted differential with metal gear wheels

ss LiPo-Brushle PoweredThe illustrations show the RTR model as prototype

Spare parts Available under order no. 90171.XX, 90170.XX, and 90172.XX in the Online Shop at www.graupner.de RC functions Right / left Forward / brake / reverse

Colour differs from that delivered

Recommended accessories Type ULTRAMAT 14 plus Mignon ECO-Power 1.2V/800 mAh Power battery (4 pcs) LiPo Battery V-MAXX 60C 2S2P/5800 7.4V G4 LiPo Battery V-MAXX 50C 3S2P/6800 11.1V G3.5

Order No. 6464 3621 3426 99013 99006

No. off 1 8 2 1 1

64

Off-ROad mOdels65

mm mm mm g mm mm

CVD drive shafts in front

Aluminium chassis braces High-power steering servo with metal gears

Robust machined aluminium chassis

Car models


FLASH 3.0 NITRO RACE BUGGY 4WD RTR, scale 1:8Order No. 90173.RTR GM-Racing Flash 3.0 Race RTROrder No. 90173.RTR The Short Course Flash 3.0 is based on the successful Flash 3.0 buggy chassis and sets new standards for 1/8 nitro ready-to-run models. It comes standard with everything you need to compete and succeed on the short course. Unique in this classe, for example, are the red anodised 17-mm Big Bore aluminium shock absorbers, machined aluminium shock absorber bridges, and chassis braces, all of which make the Flash a real racer. The Flash 3.0 comes standard with a high-quality GM-Racing XG-6i Sport-Spec 2.4-GHz remote control system and a powerful GM Nitro-Bull 3.5 cc motor that is equipped with a pull cord starter and is 99% preassembled. All you need are fuel, rechargeable or regular batteries for the remote control, and a nitro starter set. Factory-assembled 4-WD chassis with four-wheel drive and three bevel gear differentials Centre differential with separately adjustable epoxy disc brakes front and rear GM-Racing XG-6i Sport-Spec 2.4GHz RC system with steering servo, throttle servo, and receiver installed and connected Steering and throttle linkages already adjusted Powerful, reliable 3.5-cc capacity GM-Racing Nitro Bull Motor with pull-cord starter. Adjustable castor range of 17 - 24 Four high-quality, adjustable, 17-mm Big Bore oil-filled shock absorbers. CVD drive shafts for power transmission to the front wheels. Painted and bonded polycarbonate body shell. Additional Features Aluminium parts and shock absorbers red anodised Completely equipped with high-quality ballraces Closed, splash-protected RC box for battery and receiver High-grip Rally Game tyres fully bonded and installed on the rims Metal main gear wheel and steel bell with 3-cheek clutch Independent suspension with double transverse arms on front and rear axles Transverse stabiliser bars on front and rear axles Aluminium Masterfix tuned pipe Tank capacity 125 ccm Sturdy 3-mm aluminium chassis Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase adjustable Ground clearance Reduction gear unit Motor 1:8 530 300 180 3450 322-326 70 12.2:1 3,5Independent suspension with double transverse arms on front and rear axles Powerful steering servo with metal gears Robust machined 3-mm aluminium chassis Enclosed, splashproof RC box for battery and receiver Centre differential with separately adjustable disc brakes front and rear

ccm

Right-hand / left-hand threaded trackrods Robust machined aluminium shock absorber bridges 125 cc fuel tank Big Bore 17-mm adjustable oil-filled shock absorbers CVD-Antriebswellen vorne

GM Nitro-Bull 21 motor

Machined aluminium chassis braces

Aluminium Masterfix tuned pipe

R R ACE RT

Remote control system included in the set

Sinceitsdesignisnearlyidenticalto thatofitstwin,theShortCourse Flash3.0BrushlessRaceBuggy,itis possibleatanytimetoconvertto brushlessoperation.Thebasicchassisisidenticalinbothmodels.

Spare parts Available under order no. 90171.XX, 90173.XX, and 90170.XX in the Online Shop at www.graupner.de RC functions Right / left Throttle / brake

The illustrations show the RTR model with standard equipment

Recommended accessories Type TITAN PRO RS 25, 2.5l G5 standard glowplug, cold Nitro Starter Set Mignon ECO-Power 1.2V/800 mAh Power battery (4 pcs) IB 3+2-1600 NiMH BEC2/3A receiver battery

Order No. 2643.2L 92642 90504 3621 3426 8716.5H

No. off 1 1 1 8 2 1

66

Off-ROad mOdels67

mm mm mm g mm mm

Transverse stabiliser bars on front and rear axles

ThenewlydevelopedGMRacing Flash3.0Raceistheperfectfirststep intotheworldof1:8scalenitrobuggies.Thevehicleoffershigh-quality competitivetechnologyatasensationallyaffordableprice.Numerousmachinedaluminiumpartsprovidethe necessarystability,evenunderthe toughestconditions,makingitideal forthebeginner,butalsoforthedriver enteringcompetitionsforthefirst time.Thelarge17-mmBigBoreshock absorberscombinedwiththefullyadjustablechassismakeforperfect groundcontact.ThepowerfulandreliableNitro-Bullmotorwithpull-cord starterprovidesthenecessarypower forexcellentdrivingperformancein anyterrain.

Car models

RC car accessories RTR sets with new XG-6i FHSS 2,4 GHz R/C systems

2,4 GHz

XG-6i 2.0 FHSS Sport-Spec 2,4 GHz Order No. 94002

Flash 3.0 Race Brushless Buggy 4WD, scale 1:8 Order No. 90170.RTR

Flash 3.0 Nitro Race Buggy 4WD RTR, scale 1:8 Order No. 90171.RTR

WP MINI ST16 BAJA TRUGGY 4WD RTR, scale 1:16 BR Order No. 90156.RTR

RX XG-6i 2.0 FHSS Receiver, 3 channels Order No. 94002.1

Brushless Sport 120R Order No. 97160

Roadfighter Brushless conversion kit /engine/controller Order No. 97161

Glow plug RP8 Order No. 1670

RADICATOR electro 4WD RTR RC, scale 1:10 Order No. 90500.RTR

BAJA ELEKTRO-TRUGGY 4WD, scale 1:10 RTR Order No. 90160.RTR

MONSTER TRUCK MT6 FUEL 2WD RTR, scale 1:6 Order No. 90162.RTR

GM FUN-TRUGGY-LEOPARD 4WD, scale 1:8 RTR Order No. 90505.RTR

Tuned pipe silencerand manifold T1060for 1:10 Order No. 92683

Tuned pipe silencerand manifold T2080for 1:8 Order No. 92684

Buggy tyre Lube 05 and inlays Order No. 96066.5


WP RADICATOR NITRO TRUGGY 4WD M. RC, scale 1:10 Order No. 90507.RTR

WP MINI ST16 BRUSHL. TRUGGY 4WD RTR, scale 1:16 Order No. 90152.RTR

WP MINI B16 BRUSHL.BUGGY 4WD RTR scale 1:16 Order No. 90153.RTR


Wheel assembly, glued, Lube 20 Order No. 96066.20K



68

69

Car models

RC Off-Road Buggy

CARISMA GT14B ARR II 4WD BUGGYOrder No. 90370 Electric Off-Road, scale 1:16Order No. 90370 The new Carisma GT14B RTR is a completely new development designed to crate the best off-road buggy on a scale of 1:16. The GT14B, which is based on a sturdy GRP chassis with independent suspension and large oilfilled shock absorbers, easily masters nearly any terrain, thanks to its great ground clearance. The fully adjustable chassis with all-wheel drive and powerful 370 engine (optional) deliver top performance. The ARR II Set is delivered pre-installed with bevel gear differential and transparent polycarbonate body. The steering servo is included, but no remote control, speed controller, battery, or motor. Completely factory-assembled GRP 4-WD chassis, scale 1:16 All-wheel drive via articulated joint, metal drive shafts to all wheels Camber/ toe-in adjustable via right/left threaded rods Two bevel gear differentials, slip coupling suitable for 370 electric motor Independent suspension with oil-filled shock absorbers Comes complete with high-quality ballraces High-traction, air-filled off-road tyres with inserts Transparent polycarbonate body Steering servo included Many tuning parts available RC functions Right/left Forward/brake/reverse Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance Electric motor 1:16 310 205 105 915 190 75 25 370 TheCarismaGT14Bchassisisjustas technicallysophisticatedasa1:10 competitionbuggy,butonasmaller scale. Thatmakesthemodelslighterand moreagile,andtheycanbeoperated withoutanyprobleminalimited space.TheuseofGM-RacingbrushlesssystemsandLiPobatteriesresultsinunbelievablygreatperformance.TheARR2variantcanbe equippedindividuallywithremote control,drivebattery,andpropulsion systems,becausetheyarenotincludedindelivery.

Complete with high-quality ballraces

Chassis tub for perfect protection Adjustable slip clutch

Sturdy bevel gear differential

All-wheel drive via articulated joint

Adjustable oil-filled shock absorbers

Adjustable right/left track rods Steering servo with servo saver included GRP chassis and radio plate

Allmodelsarecompletelyassembled. TheGT14Bcanbeupgradedwithoptionaltuningparts,suchascarbon fibrechassis,CVDarticulatedjoint,or stabilisers.

Metal drive shafts to all wheels

High-traction knobby offroad tyres

Figure shows the model with accessories, such as motor and speed controller

Spare parts Available under order no. 90370.XX in the price list or in the Online Shop at www.graupner.de.

70

Off-ROad mOdels71

mm mm mm g mm mm mm

Sturdy transverse control arms for optimal handling

Car models

RC Off-Road Buggy

CARISMA GT14B RTR 4WD BUGGYOrder No. 90370.RTR Eectric Off-Road, scale 1:16Order No. 90370.RTR The new Carisma GT14B RTR is a completely new development designed to create the best off-road buggy on a scale of 1:16. The GT14B, which is based on a sturdy GRP chassis with independent suspension and large oilfilled shock absorbers, easily masters nearly any terrain, thanks to its great ground clearance. The fully adjustable chassis with all-wheel drive and powerful 370 engine (optional) deliver top performance. Thanks to the newly developed 2.4 GHz FHSS remote control system, now all you have to do is switch on and take off; no more frequency problems or interference. Also new is the separation of receiver and speed controller, so that the models can easily be converted to brushless systems. All the equipment you need for operation is included, such as drive battery and charger. Completely factory-assembled GRP 4-WD chassis, scale 1:16 All-wheel drive via articulated joint Metal drive shafts to all wheels Camber/toe-in adjustable via right/ left threaded rods Two bevel gear differentials, slip coupling 370 electric motor 2.4 GHz remote control system, receiver, and speed controller sold separately Independent suspension with oil-filled shock absorbers Comes complete with high-quality ballraces High-traction, air-filled off-road tyres with inserts Painted polycarbonate body with decals 7.2 V NiMH drive battery with matching charger already included Many tuning parts available RC functions Right/left Forward/brake/reverse Specification Scale Overall length, approx. Width Height, approx. All-up weight RTR, approx. Wheelbase approx. Wheel diameter Ground clearance Electric motor 1:16 310 205 105 915 190 75 25 370 TheCarismaGT14Bchassisisjustas technicallysophisticatedasa1:10 competitionbuggy,butonasmaller scale.Thatmakesthemodelslighter andmoreagile,sotheycanbeoperatedwithoutanyprobleminalimited space.TheuseofGM-RacingbrushlesssystemsandLiPobatteriesprovidesunbelievablygreatperformance, upto80kmh.

Allmodelsarecompletelyassembled. TheGT14Bcanbeupgradedwithoptionaltuningparts,suchascarbon fibrechassis,CVDarticulatedjoint,or stabilisers.

Complete scope of delivery

Spare parts Available under order no. 90370.XX in the price list or in the Online Shop at www.graupner.de.

72

Off-ROad mOdels73

mm mm mm g mm mm mm

Car models

RC Formula 1

CARISMA F14 EVO ARTO 2WD, scale 1:14Order No. 90360 F14 Electric, scale 1:14Order No. 90360 The newly developed Carisma formula chassis is a super-realistic, up-to-date formula model on a scale of 1:14. The torsion-resistant GRP chassis forms the basis of the formula racer; the adjustable chassis and true-to-scale body are sure to give you that racing feeling. It is delivered as an ARTR model, so you can choose whichever drive and remote control components you want. Ready, set, go for the F14 EVO season on a scale of 1:14! Completely preassembled 4WD chassis on a scale of 1:14 Bevel gear differentials on the rear axle Independent suspension in front; one-piece rear axle with oil pressure shock absorbers T-bar rear axle suspension Adjustable chassis Completely equipped with high-quality ballraces True-to-scale air-filled tyres with inserts True-to-scale polycarbonate body with applied parts such as diffusor, mirror, airbox camera, etc. Plastic front and rear spoilers Aluminium motor mounts Pre-installed steering servo Specification Scale Overall length, approx. Width Wheelbase approx. Ground clearance Electric motor 1:14 350 128 221 5 370 RC functions Right/left Forward/brake/reverse TheCarismaF14EVOARTR4WDis deliveredcompletelypreassembled asarollingchassiswithbuilt-insteeringservo,butotherwisewithoutany electronicsystem.Thatenablesyou toputtogetheryourownindividual formulaRacerbasedonyourown ideas.Manytuningpartsandspare partsarealsoavailableindividually. Thesmallscaleof1:14meansthatexcitingracescanbeheldeveninthe smallestofspaces.Atransparentformulabodyisincludedinthedelivery.

mm mm mm mm

Delivery includes transparent body

Spare parts Available under order no. 90360.XX in the price list or in the Online Shop at www.graupner.de Recommended accessories Type XG-6i Race-Spec 2,4GHz GM-GENIUS Sport 35R GRAUPNER INLINE 380 7.2 V NiMH Intellect 6N-1600 2/3A battery, connector mini LiPo battery V-MAXX45C 2/1600 CAR 7.4VG3.5 Order No. 94001 7153 6541 98870.6 98976 No. off 1 1 1 1 1

74

RC On-ROad mOdel75

Car models


CARISMA GT14 PRO MK2 ARTR 4WDOrder No. 90351 Carisma GT14 seriesOrder No. 90351 The Carisma GT14 PRO MKII is a pure competition chassis, as technically advanced as any high-class 1:10 competition touring car, but combined with the advantages of the smaller scale of 1:14. The GT 14 PRO MKII can be used with brushed or brushless motors. Depending on equipment, the brushless variant can reach speeds of up to 80 km/ hr. The high-traction rubber tyres on spoked wheels provide the needed traction. The model is delivered without body; most of the true-scale body shells from the Carisma GT14 range fit. Completely preassembled 4WD chassis on a scale of 1:14 with articulated drive shafts New GRP chasis and radio plate for a low centre of gravity New steering geometry for optimal running performance Independent suspension with 4 adjustable oil pressure shock absorbers 2 bevel gear differentials, adjustable slip clutch New transverse control arm with adjustment screw for ground clearance New shock absorber bridges for optimal shock absorber positioning Aluminium motor ount Completely ballraced 4 deep-tread High-Grip tyres on new rims Suitable for 6-cell 1600 mAh NiMH drive batteries and for LiPo batteries Right/left rack end threads Various toe-in and castor angles possible Variable wheelbase Specification Scale Overall length, approx. Width Wheelbase approx. Ground clearance Electric motor All-up weight, approx. 1:14 280 132 185 5-7 380 365 TheCarismaGT14PROMK2ARTR 4WDisdeliveredcompletelypreassembledasarollingchassiswithout anyelectronicsystem.Thatenables youtoputtogetheryourownindividualGT14Racerbasedonyourown ideas.Manytuningpartsandspare partsarealsoavailableindividually. Thesmallscaleof1:14meansthatexcitingracescanbeheldeveninthe smallestofspaces.TheMazda6 bodyhasproventobeaerodynamicallyperfect,especiallyfortheextremelyfastbrushlessvariant.

mm mm mm mm g

RC functions Right/left Forward/brake/reverse

Transparent body available as accessory

Scope of delivery of the completely assembled chassis

Spare parts Available under order no. 90300.XX in the price list or in the Online Shop at www.graupner.de

Recommended accessories Type Car body for MAZDA 6 GT14, unpainted XG-6i 2.0 FHSS Sport-Spec 2,4 GHz GM-GENIUS Sport 35R GRAUPNER INLINE 380 7.2 V LiPo battery V-MAXX45C 2/1600 CAR 7.4VG3.5 NiMH Intellect 6N-1600 2/3A battery, connector mini

Order No. 90300.119 94002 7153 6541 98976 98870.6

No. off 1 1 1 1 1 1

76

RC On-ROad mOdel77

Car models


YOKOMO R12 PAN CAROrder No. 90403 Pan Car, scale 1:12Order No. 90403 World Champion 2010! The new Yokomo R12 is a thoroughbred competition vehicle for the 1:12 class. This new development won the hotly contested title at its first big test at the World Championship 2010 in Burgdorf with Naoto Matsukura. With this spectacular debut, Team Yokomo once again de

Date post:	18-Dec-2014
Category:	Documents
Upload:	benghelu
View:	137 times
Download:	19 times

2011_en_screen

Documents