© 2012 Autodesk

Sweet Suite CollaborationModule 1: Suite InteroperabilityVeronica LambTechnical Specialist, US CAD of Hawaii

© 2012 Autodesk

Module Summary

This module describes the software packaged in the Building Design Suite along with the Product Enhancements, Service Packs/Updates, Object Enablers, and File Exporters needed to ensure smooth interoperability between the different software.

© 2012 Autodesk

Building Design Suite Ultimate

© 2012 Autodesk

AutoCAD® AutoCAD® Architecture AutoCAD® MEP AutoCAD® Structural DetailingAutodesk® Showcase® Autodesk® SketchBook® Designer Autodesk® Revit®Autodesk® 3ds Max® Design Autodesk® Navisworks® ManageAutodesk® Quantity Takeoff Autodesk® Inventor® Autodesk® Robot® Structural Analysis ProfessionalAutodesk® Infrastructure Modeler

© 2012 Autodesk

The Extras

© 2012 Autodesk

Subscription Product Enhancements

Look for product enhancements on www.subscription.autodesk.com

© 2012 Autodesk

Subscription Product Enhancements

Look for product enhancements on www.subscription.autodesk.com

© 2012 Autodesk

Updates and Service Packs

Look for these on www.autodesk.com

© 2012 Autodesk

Updates and Service Packs

Look for these on www.Autodesk.com

© 2012 Autodesk

Updates and Service Packs

Look for these on www.Autodesk.com

© 2012 Autodesk

Updates and Service Packs

Look for these on www.Autodesk.com

© 2012 Autodesk

Object Enablers

www.autodesk.com/oe Choose appropriate enabler -

Software & Year Autodesk Navisworks OE uses

AutoCAD OE

© 2012 Autodesk

Object Enablers

www.autodesk.com/oe Choose appropriate enabler -

Software & Year Autodesk Navisworks OE uses

AutoCAD OE

© 2012 Autodesk

Object Enablers

www.autodesk.com/oe Choose appropriate enabler -

Software & Year Autodesk Navisworks OE uses

AutoCAD OE

© 2012 Autodesk

File Exporters

Important for Autodesk Navisworks

Auto Install if Autodesk Navisworks is last

Manual install from Control Panel

© 2012 Autodesk

File Exporters

Important for Autodesk Navisworks

Auto Install if Autodesk Navisworks is last

Manual install from Control Panel

© 2012 Autodesk

File Exporters

Important for Autodesk Navisworks

Auto Install if Autodesk Navisworks is last

Manual install from Control Panel

© 2012 Autodesk

Next Steps

Modules in this class: Module 1: Suite Interoperability Module 2: Workflow between Autodesk Revit and AutoCAD Civil 3D Module 3: Workflow into Autodesk Navisworks Manage Module 4: Interference Check in Autodesk Revit Module 5: Coordination in Autodesk Navisworks Manage

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

Sweet Suite CollaborationModule 2: Workflow between Revit and Civil 3DVeronica LambTechnical Specialist, US CAD of Hawaii

© 2012 Autodesk

Module Summary

This module demonstrates the workflow between Autodesk Revit and AutoCAD Civil 3D in the beginning stages of a project.

© 2012 Autodesk

Initial Project Setup

© 2012 Autodesk

Civil – Surfaces and Contour Lines

© 2012 Autodesk

Civil Data into Revit

© 2012 Autodesk

Next Steps

Modules in this class: Module 1: Suite Interoperability Module 2: Workflow between Autodesk Revit and AutoCAD Civil 3D Module 3: Workflow into Autodesk Navisworks Manage Module 4: Interference Check in Autodesk Revit Module 5: Coordination in Autodesk Navisworks Manage

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

Sweet Suite CollaborationModule 3: Workflow into Navisworks ManageVeronica LambTechnical Specialist, US CAD of Hawaii

© 2012 Autodesk

Module Summary

This module demonstrates the workflow into Autodesk Navisworks Manage from Revit and Civil 3D.

© 2012 Autodesk

Export from Revit

© 2012 Autodesk

Export from Civil 3D

© 2012 Autodesk

Appending Data into Navisworks

© 2012 Autodesk

Next Steps

Modules in this class: Module 1: Suite Interoperability Module 2: Workflow between Autodesk Revit and AutoCAD Civil 3D Module 3: Workflow into Autodesk Navisworks Manage Module 4: Interference Check in Autodesk Revit Module 5: Coordination in Autodesk Navisworks Manage

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

Sweet Suite CollaborationModule 4: Interference Check in Autodesk RevitVeronica LambTechnical Specialist, US CAD of Hawaii

© 2012 Autodesk

Module Summary

This module demonstrates the Interference Check tools in Revit along with discussing Shared Coordinates between disciplines and Coordination Review.

© 2012 Autodesk

Interference Check

© 2012 Autodesk

Linking, Shared Coordinates, and Copy/Monitor

© 2012 Autodesk

Next Steps

Modules in this class: Module 1: Suite Interoperability Module 2: Workflow between Autodesk Revit and AutoCAD Civil 3D Module 3: Workflow into Autodesk Navisworks Manage Module 4: Interference Check in Autodesk Revit Module 5: Coordination in Autodesk Navisworks Manage

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.

© 2012 Autodesk

Sweet Suite CollaborationModule 5: Coordination in Navisworks ManageVeronica LambTechnical Specialist, US CAD of Hawaii

© 2012 Autodesk

Module Summary

This module demonstrates the coordination tools in Autodesk Navisworks Manage.

© 2012 Autodesk

Clash Detective

© 2012 Autodesk

Viewpoints & Review Tools

© 2012 Autodesk

Reports

© 2012 Autodesk

Next Steps

Modules in this class: Module 1: Suite Interoperability Module 2: Workflow between Autodesk Revit and AutoCAD Civil 3D Module 3: Workflow into Autodesk Navisworks Manage Module 4: Interference Check in Autodesk Revit Module 5: Coordination in Autodesk Navisworks Manage

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.