A/C, ALT, P/S Brackets & Accessories
• Aluminum & steel fabricated bracket sets
• V-belt & multi-groove set-ups
• Alternators, compressors
• P/S pumps, pulleys, belts
• Made in the USA
Bracket Kits & Accessories
WWW. STREETRODBRACKETRY . COM 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
“When details matter”
Date: 2/01/2012
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 2
Billet Aluminum Brackets
We believe the functionality, durability, and “unique aesthetics” of our 1000 series aluminum bracket kits, set us apart from the rest of the industry. We use aircraft quality 6061-T6 aluminum. We then profile and machine the parts 360 degrees to completely remove the exterior factory surface to insure a top quality finish. Available for small block Chevy, short or long water pump set-up. Great for narrow hood applications. Two finishes are available. Polished: reveals a show quality polished finish. Machined: This allows you to choose your own finish. You can have them brush finished or chromed. You can even paint, or powder-coat them to match your engine color. Which ever option you choose we know you’ll be pleased with the perfect fit, alignment, and appearance these brackets will add to you engine compartment.
MADE IN THE U.S.A.
Small Block Chevrolet Cylinder Head
Accessory Bolt Hole Locations
GM GEN 1- 1955 thru 1968
GM GEN 1- 1969 thru 1986
GM GEN 1- 1987 - UP 1987 thru 1995 - 3/8” intake to head bolts angled except two on each side in center of intake, they are straight down
GM GEN 1- 1987 - UP Same accessory bolt hole pattern as above, but intake bolt size and pattern changed from 1996 - up. 5/16” intake to head bolts, all straight down. No longer any center bolts
GM GEN 1- 1986 thru 1991 Corvette aluminum GM GEN 1- 1992 thru 1996 LT-1 GM GEN 1- ZZ4 3/8” angled intake to head bolts
GM GEN 1- Aluminum FASTBURN heads 5/16” intake to head bolts are straight down
Page 3
Billet Aluminum A/C and Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt
The 1000 series Billet Aluminum bracket kits. Complete with a/c and alternator brackets, and all nec-essary hardware. Kits use the 508 style compressor with optional output ratings and port configurations. Alterna-tor options are the standard GM 10SI, or the 2 o’clk small case GM CS-130. Both are available with 1or 3 wire con-nections and multiple amp ratings. These kits require accessory bolt holes in the end of the cylinder heads. GM GEN 1, 1969-up and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold sepa-rately and available in various finishes. 1001-BP/polished finish -10SI alternator $334.00 1001-BM/machined finish -10SI alternator $291.00 1002-BP/polished finish - CS130 alternator $334.00 1002-BM/machined finish - CS130 alternator $291.00
Page 4
1002-BP Shown w/ optional P/S kit 201-P
12-3/4”
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 5
Aluminum A/C & Alternator Brackets/V-Belt
1003 Billet Aluminum A/C and Alternator bracket kit. Complete with both brackets and all necessary hard-ware. Available in polished or machined finish. Fits GEN I small block Chevy engines with short water pump and 1987 & up center bolt valve cover cylinder heads, and most aftermarket heads. See page 3 for head bolt pattern. Kit uses the 508 style compressor with optional output ratings and port configurations. The alternator is the 2 o’clk small case GM CS-130. Available with 1or 3 wire connections and various amp ratings. Accessories avail-able in natural, polished, or chrome finish. Accessories sold separately. 1003-BP polished finish $338.00 1003-BM machined finish $295.00
Shown with optional P/S kit 202-P
7”
16-1/4”
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 6
Aluminum A/C & Alternator Brackets Small Block Chevy/Long Water Pump/V-Belt
1100 series Billet Aluminum A/C & Alternator bracket kits. Complete with both brackets and all necessary hardware. Kits use the 508 style compressor, with op-tional output ratings and port configurations. Alternator options are the standard GM 10SI, or the 2 o’clk small case GM CS-130. Both are available with 1or 3 wire con-nections and multiple amp ratings. Kits require accessory holes in the end of the cylinder heads. GM GEN 1 1969-up, and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold separately and available in natural, polished, or chrome finish. 1101-BP/polished finish -10SI alternator $340.00 1101-BM/machined finish -10SI alternator $299.00 1102-BP/polished finish - CS130 alternator $340.00 1102-BM/machined finish - CS130 alternator $299.00
Kit 1102-BP Shown
12-3/4”
Aluminum A/C & Alternator Brackets Multi-Groove Belt
w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Page 7
1000 series Billet Aluminum A/C & Alternator bracket kit with multi-groove belt. Comes complete with both brackets, crankshaft, water pump, and alternator pulleys. Fits small block Chevy with short reverse rotation wa-ter pump. 508 style compressor, GM 10SI alternator, or the 2 o’clk small case GM CS-130. Both available with 1or 3 wire connections and multiple amp ratings. Requires accessory holes in the end of the cylinder heads. GM GEN 1 1969-up, and most aftermarket heads. See page 3 for head bolt pattern. Accessories sold separately and available in natural, polished, or chrome finish. 1004-BP/polished finish - 10SI alternator $579.00 1004-BM/machined finish - CS 130 alternator $495.00 1005-BP/polished finish - 10SI alternator $579.00 1005-BM/machined finish - CS 130 alternator $495.00
Kit 1004-BP shown with black pulleys and optional P/S kit 204-P
13-3/4”
Steel A/C & Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt
w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Page 8
2000 series Steel A/C & Alternator bracket kits. Fits Small Block Chevy/short water pump/V-belt, 508 style compressor, GM 10SI alternator, or the 2 o’clk small case GM CS-130. S/S crossed adjusting bars. No accessory head bolt holes required. Accessories sold separately. 2001-B/natural finish/10SI alternator $189.95 2001-BP/black pwd.coat finish/10SI alt. $210.00 2003-B/natural finish/CS 130 alternator $189.95 2003-BP/black pwd.coat finish/CS130 alt. $210.00
2001-B shown
13-1/4”
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 9
Steel A/C & Alternator Brackets Small Block Chevy/Short Water Pump/V-Belt
2000 series Steel A/C & Alternator bracket kits. Fits Small Block Chevy/short water pump/V-belt, 508 style compressor, GM 10SI alternator, or the 2 o’clk small case GM CS-130. S/S straight adjusting bars. No accessory head bolt holes required. Accessories sold separately. 2002-B/natural finish/10SI alternator $189.95 2002-BP/black pwd.coat finish/10SI alt. $210.00 2004-B/natural finish/CS 130 alternator $189.95 2004-BP/black pwd.coat finish/CS 130 alt. $210.00
2004-B shown
12-1/4”
w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Page 10
Steel A/C & Alternator Brackets Multi-groove Belt
2000 series Billet Aluminum A/C & Alternator bracket kit with multi-groove belt. Comes complete with both brackets, crankshaft and water pump pulleys. And your choice of straight or crossed adjusting bars. Pulleys also available in polished finish. Fits small block Chevy with short reverse rotation water pump. 508 style compres-sor, GM 10SI alternator, or the 2 o’clk small case GM CS-130. Both available with 1or 3 wire connections and mul-tiple amp ratings. Accessories sold separately and avail-able in natural, polished, or chrome finish. 2007-B/natural finish/10SI alternator $370.00 2007-BP/black pwd.coat finish/10SI alt. $390.00 2009-B/natural finish/CS130 alt. $370.00 2009-BP/black pwd.coat finish/CS130 alt. $390.00 Polished Pulleys/ add $ 35.00
2009-B Shown w/black pulleys
2005-A Steel Alternator bracket kit for small block Chevy short water pump GM 10SI alternator V-belt 2005-A natural finish $85.00
2006-A Steel Alternator bracket kit for small block Chevy short water pump GM CS-130 alternator V-belt 2006-A natural finish $85.00
Low Mount Steel Alternator Brackets
Page 11 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
10-1/2”
6-1/2”
10-1/2”
5-1/2”
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 12
Steel Power Steering Brackets/V-Belt
201-P Steel P/S pump bracket kit for small block Chevy, short water pump set-up. Uses GM Type II P/S pump with remote reservoir. Mounts low on drivers side. Requires 3 groove crankshaft pulley or GM add on crankshaft pulley #1232P. Belt runs in 3rd outer groove of crankshaft pulley. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 201-P natural finish $89.95
Steel Power Steering Brackets/V-Belt
Page 13 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Steel P/S pump bracket kits for small block Chevy, short or long water pump set-up. Uses GM Saginaw P/S pump with psi and return ports at 7 & 8 o’clk positions when viewed from rear. Mounts low on drivers side. Requires 3 groove crankshaft pulley. GM add on crankshaft pulley #1232P for short pump. Belt runs in outer groove of crankshaft pulley on short pump and inner groove on long pump set-up. Comes complete with brackets and mounting hardware. P/S pumps and pulleys sold separately. 203-P natural finish $69.95 250-P natural finish $69.95
To Order Call: (817) 614-9659 Or 1-866-330-0428
Page 14
Aluminum Power Steering Brackets/V-Belt
202-P Billet Aluminum P/S pump bracket kit. For small block Chevy, short water pump set-up. Uses GM Type II P/S pump with remote reservoir. Mounts low on drivers side. Requires 3 groove crankshaft pulley or GM add on crankshaft pulley #1232P Belt runs in 3rd outer groove of crankshaft pulley. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 202-PP polished finish $147.95 202-PM machined finish $121.95
Steel Power Steering Brackets Multi-Groove Belt
Page 15 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
204-P Steel P/S pump bracket kit for small block Chevy, short reverse rotation pump set-up. Uses GM Type II P/S pump with remote reservoir. Mid-mount on drivers side. Uses multi-groove belt. Compatible with SRB pulleys and the 1000 and 2000 series multi-groove a/c and alternator bracket kits. Comes complete with brackets, mounting hardware, and stainless steel adjusting bar. P/S pumps and pulleys sold separately. 204-P natural finish $85.00
To Order Call: (817) 614-9659 Or 1-866-330-0428
Steel Chevy Six Cylinder A/C Bracket/V-Belt
5001 – Steel A/C compressor bracket kit for GM GEN 3 four(153C.I.), and six cylinder(194,230,250, and 292C.I.) engines. Uses the 508 style compressor. Requires a two groove pulley set-up. Some small and big block short water pump pulleys will work as long as both grooves are the same diameter and your water pump flange has dual bolt patterns. Fan and spacer bolt patterns need to match. We recommend using a six blade fan of the largest diameter possible for added cooling capacity. Comes complete with bracket and mounting hardware. 5001 natural finish $129.00 5001-C w/natural finish Sanden compressor $308.00 (Other compressor options available)
Page 16 To Order Call: (817) 614-9659 Or 1-866-330-0428
Steel “Chevy Stove Bolt” Six Cylinder A/C Bracket/V-Belt
Page 17 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
5010 - Steel A/C compressor bracket kit for the GM GEN II 6 cylinder engines, (1937 thru 1962 - 216C.I. 235C.I. and 261C.I.). Uses the 508 style compressor. Does not require dual groove pulleys. Compatible with headers and four barrel or dual carbu-retor set-ups. Will not work with most three carburetor set-ups. Comes complete with bracket and all necessary mounting hardware. Accessories available separately. 5010 natural finish $119.95 5010-C w/natural finish Sanden compressor $299.00 (Other compressor options available)
Page 18 To Order Call: (817) 614-9659 Or 1-866-330-0428
GEN III and GEN IV LS Series A/C Bracket
2201 - This one piece LSX A/C compressor bracket kit, quickly and easily mounts a 508 style compressor to your GM LS series engine. The compressor runs in the same belt loop as all other OEM accessories utilizing the fac-tory brackets and eliminating not only the OE compres-sor, belt, and tensioner, but also the OE compressor clearance issues commonly associated with retro-fitting the LSX engine into various vehicles. This kit is available in three different alignment options, covering virtually all LSX and crate engine accessory configurations and vehicle combinations. Can also be added to your exist-ing accessory set-up and used as an ON BOARD AIR COMPRESSOR bracket. Comes complete, belt included. Accessories available separately. 2201-CT 4.8L/5.3L/6.0L truck engine $195.00 2201-CM Camaro/ Firebird/ GTO engine $195.00 2201-CV Corvette engine $195.00
Oldsmobile 303C.I. and 324C.I.
324-B Steel A/C, Alternator, and P/S bracket kit for 1949 thru 1956 303C.I. and 324C.I. Oldsmobile engines. Uses the 508 style compressor, GM CS-130 alternator with various amp ratings available, GM Type II power steer-ing pump, with or w/o pump mounted reservoir. Uses OEM three groove water pump & crankshaft/balancer pulleys & OEM exhaust manifolds. New three groove pulleys available. Comes with all brackets, belts, & hardware. Accessories available separately. 324-B natural finish/bracket kit $425.00
324-BA bracket kit w/accessories $975.00 324-BC brackets/accessories & pulleys $1525.00
Page 19 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Ford Big Block 429 / 460 / 514
3001-B Billet Aluminum A/C, Alternator, & Power Steering kit for the 385 series Big Block Ford 429/460/ 514. This kit uses 6061 T6 billet aluminum for the brack-ets, pulleys, & covers, & stainless steel hardware. A sin-gle 6 groove serpentine belt with spring loaded ten-sioner for proper belt tension & bearing loads. Very compact design for maximum clearance. Comes com-plete w/ Sanden SD7 compressor, CS130 105 amp alter-nator, TC type II p/s pump, (available w/ or w/o pump mounted reservoir) all pulleys, covers, belt & hardware.
!!!Call for custom ordering and options!!! 3001–B polished finish $1650.00 3001-BM machined finish $1450.00
Page 20
To Order Call: (817) 614-9659 Or 1-866-330-0428
Accessories - Alternators
Page 21
GM 10SI Alternators 100 amp/1 or 3 wire New 10100-N natural $99.50 10100-C chrome $137.00 Remanufactured 10100-NR natural $89.00 10100-CR chrome $105.00
All alternators are manufactured with the best quality components available They produce 10% more idle amperage than an average alternator V-belt or Multi-groove pulley All Alternators have a 1 yr warranty
GM CS-130 Alternators New 105 amp/1 or 3 wire 10530-N natural $135.00 10530-C chrome $169.00 New 120 amp 12030-N natural $145.00 12030-C chrome $179.00 New 140 amp 14030-N natural $155.00 14030-C chrome $199.00 Remanufactured 10530-NR natural $119.95 10530-CR chrome $135.00
Accessories - Compressors
Sanden Compressors SD5, SD7, SD7B10 & more V-belt or Multi-groove Rear or Top port Natural finish $199.00 Polished finish $249.00 Aftermarket Sanden Style Compressors Natural finish $185.00 Chrome finish $199.00
Various compressor models available All compressor have a 1 yr warranty
Ford, Mopar, and other alternators available
Page 22 w w w . S t r e e t R o d B r a c k e t r y . c o m 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Accessories/GM OEM Steel Pulleys/V-Belt 4043P GM 6-3/4” 2 groove crankshaft pulley Short water pump $52.00
1232P GM 6-3/4” crankshaft pulley Add-on 3rd groove/for power steering Short water pump $55.00
5642P GM 6-1/8” 2 groove water pump pulley Short water pump $68.95
0150P - Power steering pump pulley Single groove/press-on $48.95 4343P - Power steering pump pulley Double groove/press-on $51.95
1107P - Power steering pump pulley Double groove/bolt on $48.95
Page 14
Warranties: The original manufactures warranty constitutes all of the warranties applied to each non Street Rod Bracketry manufactured item sold. At our option, Street Rod Bracketry will repair or replace any Street Rod Bracketry manu-factured item found to be defective in material or workmanship. No mone-tary refund will be awarded except in the event an incorrect product appli-cation was received, then, only if Street Rod Bracketry cannot provide cor-rect application product. Street Rod Bracketry will not be liable for any per-sonal or property damages caused by use or misuse of any product we sell or manufacture. No other warranties are expressed or implied.
Returns: All returns must be made within 30 days from purchase date. All returns after 30 days will be charged a 10% restocking fee. No returns accepted after 6 months from purchase date. All returns must have RGA# (return goods authorization; call for RGA#) on shipping label. Must be accompa-nied with copy of invoice. Must be freight pre-paid. Street Rod Bracketry will only pay return shipping charges in cases of our error. No C.O.D. or missing RGA# packages will be accepted. All returned parts must be in new condition. Parts that have been installed or attempted to install cannot be returned.
Freight Damage Claims: Freight damage claims must be made to the carrier. Always inspect ship-ment immediately upon receipt. Notify delivery driver & have them docu-ment any damages. Notify carrier immediately of any damages. Keep all packaging for carriers inspection. Do not return any damaged items until inspected by carrier.
STREET ROD BRACKETRY 1100 Jaybird Rd. Springtown, TX 76082 Order: 1-866-330-0428 - 8am to 5 pm Mon. — Fri. CST Tech: 817-614-9659 - 8am to 5 pm Mon. — Fri. CST
www.streetrodbracketry.com Tech — [email protected]
Texas Sales Tax: All products shipped or billed to a Texas address will be charged appropri-ate Texas sales tax, with the exception of exempt or resale certificate hold-ers.
Street Rod Bracketry provides car enthusiasts with
unique, affordable, and practical automotive accessory
mounting options.
About Us Street Rod Bracketry started as a division of R. D. Tooling, Inc. R. D. Tooling has been in business for ten years, working with major commercial bracket manufacturers providing machine shop tooling, along with design and manufacturing services. A personal passion for building hot rods has resulted in the creation of a unique line of bracket systems for the street rod, hot rod, & muscle car enthusiast. Over 40 years of engineering, repair, and design experience in the automotive and truck industry equips our team to design and pro-duce quality bracket products with the professional builder as well as the "do-it-your-selfer" in mind. With our background in design and manufacturing, we understand the complexities of building and fabricating necessary support systems that are clean, unique, functional, and affordable, all at the same time. We design and build our own bracket products, right here in the UNITED STATES OF AMERICA.
When details matter
Phone: (817) 614-9659 or 1-866-330-0428
E-mail:
Street Rod Bracketry
C/O R. D. Tooling, Inc.
1100 Jaybird Road
Springtown, TX 76082
WWW. STREETRODBRACKETRY . COM 1 - 8 6 6 - 3 3 0 - 0 4 2 8 / 8 1 7 - 6 1 4 - 9 6 5 9
Prices are subject to change and do not include shipping, handling or applicable sales tax. Return authorization is required. All rights reserved.
