Date post: | 28-Mar-2016 |
Category: |
Documents |
Upload: | mobile-centre-limited |
View: | 212 times |
Download: | 0 times |
LAN
DR
OV
ERLE
D Li
ghtin
g Ca
talo
gue
Signal light upgradesAll of our signal lamps (70mm & 95mm) come fitted with OEM Land Rover connectors for plug and play installation onto all 1996 and later vehicles, earlier vehicles will require the removal of the connectors.On most model Defenders excluding limited editions such as SVX the front position lights, brake/position and all four indi-cators are 70mm in diameter. The fog and reverse since 2002 have all been 95mm including special editions. Most special editions have 95mm rear lamps with the fog, reverse, brake and position being LED and the rear indicators remaining halogen bulb but becoming 95mm in size.Daytime Running Lamp (DRL) – recent legislation requires all new model cars to have DRLs fitted, as the Defender is an existing platform it is exempt from this requirement. However it is a great safety feature and also a styling enhancement and does not require any new holes or fitment of additional lamps when using our combined DRL & front position lamp.
Lamps can be purchased in any combination, for example 70mm lamps fitted on the front and set of 6 SVX style 95mm lamps on the rear.
70mm front lightsDirect replacement for existing units and fully compatible with all accessories such as KBX grilles and trims. Choice of clear or coloured lens for indicatorsFront position lamp with the option of integrated Daytime Running Light (DRL)
70mm rear lightsDirect replacement for existing units and fully compatible with all accessories such as swing away spare wheel carrierChoice of clear or coloured lens for both brake and indicators
95mm rear lightsDirect replacement for existing units using genuine Land Rover mounting plinthsChoice of coloured or clear lens for brake, indicator, fog and reverse.Genuine Land Rover accessory – same as fitted to special editions such as SVX
02
03
70mm UpgradeSize:72.5mm Lens:PolycarbonateHousing: Die-CastLight Source:LEDInput Voltage:10-30V DC
n Direct swap for original
n 4 year warranty
n Submersible waterproof
n No visible fixings
n Colour coded cable
n Aluminium base
n Clear & coloured lenses
n All functions available
n Made in USA
Current Draw:0.03A > 0.6Adepending on functionStandards: ECE approvalSealed to IP67Wiring: Approx 600mm cable or 100mm with OEconnector
Available as:Indicator – Amber lensIndicator – Clear lensBrake & position – Red lensBrake & Position – Clear lensFront position – Clear lensFront position & DRL – Clear lensRear fog – Red lensRear fog – Clear lensReverse
Front position lamp with the option of integrated Daytime Running Light (DRL)
05
95mm UpgradeSize:95mmLens:PMMAHousing: ABS & PolycarbonateLight Source:LEDInput Voltage:12V DC
n NAS spec size
n OE Land Rover supplier
n Foam mounting gasket
n Genuine LR accessory
n Genuine LR mounting kit
n Stainless steel screws
Current Draw:0.03A > 0.6A depending on functionStandards: ECE approvalSealed to IP67Wiring: Approx 500mm cable or 100mm with OEconnector
sometimes referred to as NAS or SVX style lamps
Available as:Indicator – Amber lensIndicator – Clear lensBrake & position – Red lensBrake & Position – Clear lensRear fog – Red lensRear fog – Clear lensReverse
95mm and 70mm Sets403LEDRR84 x 70mm amber lens indicators2 x 70mm clear lens front position2 x 70mm red lens brake & position
403LEDRR895MM4 x 70mm amber lens indicators2 x 70mm clear lens front position2 x 70mm red lens brake & position1 x 95mm clear lens reverse1 x 95mm red lens rear fog
403LEDRR8C4 x 70mm clear lens indicator2 x 70mm clear lens front position + DRL2 x 70mm clear lens brake & rear position
403LEDRR8C95MM4 x 70mm clear lens indicator2 x 70mm clear lens front position + DRL2 x 70mm clear lens brake & rear position1 x 95mm clear lens reverse1 x 95mm clear lens rear fog
407NAS95MMSET6C3 x 95mm clear lens indicator2 x 95mm clear lens brake & rear position1 x 95mm clear lens rear fog1 x 95mm clear lens reverse
06
All sets include fixings, wiring and upgraded LED flasher relay where required.
Any combination of size and colour available please call for details
Size:178mm Par 56Lens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 1,350 LumensEffective: 650 Lumens Low Beam760 Lumens High BeamInput Voltage:12-24V DC
n Internal bezel colour – Black or Chrome
n Direct swap for original
n Up to 5 times brighter than sealed beam
n Half the power consumption of halogen
n Submersible waterproof
n H2604 / 2D1 size
n 20,000 hour rated life
n 4 year warranty
n Whiter light
n Built in H4 connector
Current Draw:2.5 Amps @ 12V DCStandards: ECE Reg 112
Sealed to IP67
ECE Reg 10Wiring: H4 plug adaptorFeatures:Direct replacement for stand-
ard 178mm (7”) sealed or
semi-sealed headlight inserts
Model 8700
07
08
Size:178mm Par 56Lens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 1,350 LumensEffective: 650 Lumens Low Beam760 Lumens High BeamInput Voltage:12-24V DC
Current Draw:2.5 Amps @ 12V DCStandards: ECE Reg 112
Sealed to IP67
ECE Reg 10Wiring: H4 plug adaptorFeatures:Direct replacement for stand-
ard 178mm (7”) sealed or
semi-sealed headlight inserts
Model 8700n Integral front position lamp
n Internal bezel colour – Black or Chrome
n Direct swap for original
n Up to 5 times brighter than sealed beam
n Half the power consumption of halogen
n Submersible waterproof
n H2604 / 2D1 size
n 20,000 hour rated life
n 4 year warranty
n Whiter light
n Built in H4 connector
09
Size:178mm PAR 56Lens:GlassHousing: Die-CastLight Source:LEDRaw: 1,800 LumensEffective: 970 LumensInput Voltage:12-24V DC
n Internal bezel colour – Black or Chrome
n Complete with housing
n E approved
n Driving beam pattern
n Submersible waterproof
n H2604 / 2D1 size
n 20,000 hour rated life
n 4 year warranty
n Whiter light
n Half the power consumption of halogen
Model 8701Current Draw:2.5 Amps @ 12V DCStandards: ECE Reg 112,
Sealed to IP67
ECE Reg 10Wiring: H4 plug adaptorFeatures:Direct replacement for
standard 178mm (7”)
sealed or semi-sealed headlight inserts
Model 7155Size:167mm x 119mmLens:Glass or PolycarbonateHousing: Die-CastLight Source:LEDRaw: TBAEffective: TBAInput Voltage:12-24V DC
n 117460 Candela output (Pencil beam)
n Up to 5 times brighter than sealed beam
n Half the power consumption of halogen
n Clear or coloured lens covers available
n Submersible waterproof
n Choice of protective covers
n 20,000 hour rated life
n 4 year warranty
n Whiter light
n Built in waterproof connector
n Choice of black or silver housing
Current Draw:3.7Amps @12V DC Pencil 3.25Amps @12V DC DrivingStandards: ECE Reg 112
Sealed to IP67
ECE Reg 10Wiring: Deutsch DT042P
11
12
Model 8655Size:146mm PAR 46Lens:GlassHousing: AluminumLight Source:LEDRaw: TBAEffective: TBAInput Voltage:12-24V DC
Current Draw:2.8 Amps @ 12V DCStandards: ECE Reg 112
Sealed to IP67
ECE Reg 10Wiring: TBA
n E approved
n Driving beam pattern
n Submersible waterproof
n PAR 46 size
n 40,000 rated life
n 4 year warranty
n Whiter light
n Low power consumption
13
Model 4410Size:79mmLens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 1,100 LumensEffective: 770 LumensInput Voltage:12-48V DC
n Integral waterproof connector
n Low power draw
n Brighter than 55W halogen
n 40,000 hour rated life
n 4 year warranty
n Universal mounting
n Flood or Spot beam pattern
n Amber lens available
Current Draw:1.20 Amps @ 12V DCStandards: Sealed to IP67Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cableFeatures:Universal mount
Model 9049Size:641 x 67mmLens:PolycarbonateHousing: Die CastLight Source:LEDRaw: 2,200-6,600 LumensEffective: 1,320-3,960 Lumens
n Remote control optional
n 2, 4 or 6 module versions
n Floor or driving beam versions
n Heavy duty mounting bracket
n Inline waterproof connector
n 40,000 hour rated life
n 4 year warranty
Input Voltage:12V or 24V DCCurrent Draw:4 Amps @ 12V DCStandards: Sealed to IP67ECE Reg 10Wiring: 300mm harnessFeatures:2, 4 & 6 moduleversions available
Remote ControlledVersion Available!While the installation of our standard 9049 involves hooking up an in-cab on/off switch, the remote-controlled version requires nothing more than simply pressing a button on the programmable key fob. Available with the 4-module version only, this convenient option allows you to cycle through vari-ous combinations of lights being turned on & off with ease. One key fob comes standard with the remote-controlled version, however, additional fobs can be ordered at the time of purchase and come pre-programmed for your light.
15
16
Model 850Size:136 x 89mmLens:PolycarbonateHousing: RubberLight Source:LEDRaw: 420 LumensEffective: 250 LumensInput Voltage:12V DC
n Low cost
n Unbreakable rubber housing
n 40,000 hour rated life
n 4 year warranty
n Not polarity sensitive
n Universal mount
Current Draw:0.45 Amps @ 12V DCStandards: Sealed to IP67Wiring: 150mm bare endsFeatures:Universal mount
Model 700Size:145 x 95mmLens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 780 LumensEffective: 400 LumensInput Voltage:12-48V DC
n Contemporary oval shape
n 40,000 hour rated life
n 4 year warranty
n Integral waterproof connector
n Universal mount
n Flood, spot & trap patterns
n IR version available
n Amber version available
Current Draw:2.0 Amps @ 12V DCStandards: Sealed to IP67CE RecognizedWiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cableFeatures:Universal mount
17
Model 783
18
Size:155 x 40mmLens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 600 LumensEffective: 430 LumensInput Voltage:12-48V DC
n Multiple mounting options
n Low profile design
n 40,000 hour rated life
n 4 year warranty
n Integral waterproof connector
n Universal mounting bracket
Current Draw:1.0 Amp @ 12V DCStandards: Sealed to IP67CE RecognizedWiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cableFeatures:Universal mount
Model 830
19
Size:95 x 95mmLens:PolycarbonateHousing: Die-CastLight Source:LEDRaw: 840 LumensEffective: 550 LumensInput Voltage:12-48V DC
n Common 100mm square size
n 40,000 hour rated life
n 4 year warranty
n Integral waterproof connector
n Universal mount
n Flood, spot or trap patterns
Current Draw:2.0 Amps @ 12V DCStandards: Sealed to IP67Wiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cableFeatures:Universal mount
Model 4100
20
Size:72 x 64mmLens:GlassHousing: RubberLight Source:MR16 HalogenInput Voltage:12 or 24V DC
n Virtually indestructible
n Integral waterproof connector
n No exposed metal parts
n Corrosion proof housing
n Can be mounted to roll cage
n Trap or flood beam pattern
n Common sealed bulb
n Universal mounting
n Value range
Current Draw:1.67 Amps @ 12V DCWiring: Supplied with 2-pin Deutsch weather proof plug with 300mm cableFeatures:Optional magnectic mount
Model 282
21
Size:216 x 49mmLens:AcrylicHousing: Reinforced NylonLight Source:LEDInput Voltage:12-24V DCCurrent Draw:0.5 Amps @ 12/24V DC
n Clear or frosted lens
n White or red / white functions
n Surface mounted
n 40,000 hour rated life
n 4 year warranty
n Durable acrylic lens
resists scratching
Standards: Sealed to IP 67Wiring: Pre-wired with 150mm cableOptions:Clear lens, Hazed lens and Red/White with hazed lens available
Model 417
22
Size:193 x 124mmLens:AcrylicHousing: Reinforced NylonLight Source:LEDInput Voltage:12V DC
n Switchable red & white functions
n Low power courtesy light/door
switch function
n 40,000 hour rated life
n 4 year warranty
n Acrylic lens resists scratching
n Low profile mount
Current Draw:0.175 Amps(Red x 2)0.325 Amps(White x 4)0.025 Amps(White x 1)Standards: Standards IP66Wiring: Wiring 150mm bare ends
Map Lights
23
Size:42 x 52mmLens:PolycarbonateHousing: Matt black finishLight Source:LEDInput Voltage:12V DCCurrent Draw:0.064 Amps @ 12V DCStandards: IP20Wiring: 100mm
n Quality Osram product
n Multiple lengths 100, 200 & 500mm
n Hardwire & cigar plug variants
n 40,000 hour rated life
n 4 year warranty
n Optional red illumination
n Built in switch
n Head rotates through 360 degrees
Blue Sea Split Charger
24
Size:99 x 89 x 48mmMax Current: 500A for 10 secondsInput Voltage:10 – 30 voltsStandards:IP67Rated switch cycles:10,000Continuous current:120AWiring: M10 studs
n Marine grade
n Hermetically sealed contacts/ vapour proof
n Tin plated copper studs
n 22mm long studs to accept multiple cables
n Multiple cable entry points
n Senses charge on either battery
n Optional remote status LED
n Capable of temporary immersion up to
30 minutes
Blue Sea Split Charger
25
Size:93 x 52 x 139mmMax Current: 2,500A for10 secondsInput Voltage:10 – 30 voltsStandards:IP66Rated switch cycles:10,000Continuous current:500AWiring: M10 studs
n Marine grade
n Silver alloy contacts for increased reliability
n Tin plated copper studs
n 22mm long studs to accept multiple cables
n Manual control / override
n Senses charge on either battery
n Remote switch & status LED
n Highest rated current carrying capability
on the market
Blue Sea Split Charger
BLue Sea Fuse Box
26
Size:85 x 165 x 39mmCover:PolycarbonateHousing: Reinforced PolycarbonateMax current:100A per blockMax fuse size: 30A per fuse positionInput voltage: 10 – 30 VoltsWiring: M5 studs for inputM4 studs for individual circuits
12 way
Size:85 x 125 x 39mmCover:PolycarbonateHousing: Reinforced PolycarbonateMax current:100A per blockMax fuse size: 30A per fuse positionInput voltage: 10 – 30 VoltsWiring: M5 studs for inputM4 studs for individual circuits6 way
n 6 & 12 way versions
n Marine grade
n Made in USA
n Tin plated copper studs
n Tin plated copper fuse holder terminals
n Fuse & power distribution box in one
n Accepts standard blade fuses
n With or without negative bus
n Spare fuses can be stored in cover
Blue Sea Fuse Holder
27
n Marine grade
n Made in USA
n Stainless steel studs
n Accepts ANL fuses up to 300A
n Removable protective cover
n Multiple cable entry points
n UL 94-V0 base resists high heat
n Design allows fuse replacement
without removing fasteners
Size:115 x 38 x 42mmCover:PolycarbonateMax fuse size: 500A Input voltage: 10 – 30 VoltsWiring: M8 studsHousing: Reinforced Polycarbonate
Carling SwitchesSize:49 x 39 x 25mmHousing: PolyesterMax current:20 AmpsInput Voltage:12 or 24 voltsStandards: IP68 when mountedWiring: 6.4mm female spadeRated switch cycles:100,000
n Marine spec
n Weatherproof
n Silver plated contacts
n Various symbols/legends available
n Multiple switching configurations
n Vibration resistant
n Replaceable switch rockers/
actuators
29
30
Jump start connectorsMax Current: 350A continuous @12V DCMax Voltage:48V DCContacts:Brass hexPosts:Nickel plated mild steelPost Size:M10Features: Suit panel thickness up to 9.5mmGlass filled nylon bush
n Bracket or panel mount options
n Insulated divider
n Easy installation
n Red or Black versions
n Colour coded insulating caps
n Drilling template provided with
panel mount version
Technical & legal information.
The original equipment (OE) lamp is approved for use with a specific incandescent bulb; the replacement of this bulb with an LED bulb inside the OE
housing invalidates the approval and makes the unit illegal for road use.
All LED signal lamps listed in this catalogue carry the correct E approval for road use and are complete replacement units. The 70mm indicators are
approved for use on the front and rear of the vehicle. 95mm LED lamps listed in the catalogue are approved for use on the rear only; for applications
using 95mm lamps at the front please use the contact information on the back page
LED headlights are approved under regulation 112 and as an aftermarket accessory do not require levelling or washing to pass an MOT.
E approval makes the lamps suitable for use anywhere in Europe and any country accepting ECE regulations such as Russia and Japan.
All lamps are correctly approved in both coloured and clear lens versions where applicable.
70mm lamps use the existing fixing holes and fix from the rear using bolts provided.
95mm lamps require the fitment of a supplied adaptor plinth which enables the use of the original 70mm fixing holes.
Fog & Reverse - Where fitted prior to 2002 the Defender uses a rectangular shaped fog & reverse lamp, from 2002 through to the present day a
95mm lamp is used.
Pre 2002 – the use of a 70mm fog & reverse or 95mm will require a small amount of additional work to mount both the fog & reverse.
Post 2002 – 10 lamps set containing 95mm lamps with the optional connectors is a complete plug & play replacement without modification. Using
the 70mm lamps will require a small amount of additional work to mount the fog & reverse.
All indicator kits are supplied with a replacement 3 pin LED flasher relay
31
Mobilecentre
PO Box 222, Evesham
WR11 4WT United Kingdom
www.mobilecentre.co.uk
www.facebook.com/mobilecentre
Tel +44 844 578 1000
Fax +44 844 578 1111