2012 Mwd Survey

68 Offshore August 2012 • www.offshore-mag.com

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min

2012 MWD/LWD Services Directory

Directional

APS Technology (Rental Division) Brian A. Stroehlein 7 Laser Lane Wallingford, CT 06492 (860) 613-4450 [email protected]

APS SureShot 3 1/8, 3 1/2, 4 3/4, 6 1/4,

6 3/4, 8, 9 1/2+

25* Collar-limited Collar-defined 150 and 175

20 and 25 (3 1/2) 27,(4 3/4 - 6 3/4) 6,

(8) 3,(9 1/2) 2

(3 1/2) 150,(4 3/4 - 6 3/4) 35,

(8) 20,(9 1/2) 10

(6 1/2 - 6 3/4) 114,(8) 61,

(9 1/2) 32

(9 1/2) 220 (3 1/8, 3 1/2) 70 - 250(4 3/4) 150 - 350

(6 1/4, 6 3/4) 150- 750(8) 300 - 1,100

(9 1/2+) 650 - 1,200

APS SureShot with Gamma 3 1/8, 3 1/2, 4 3/4, 6 1/4,

6 3/4, 8, 9 1/2+


20 and 25 (3 1/2) 29,(4 3/4 - 6 3/4) 6,

(8) 3,(9 1/2) 2

(3 1/2) 165,(4 3/4 - 6 3/4) 40,

(8) 20,(9 1/2) 10

(6 1/2 - 6 3/4) 114,(8) 61,

(9 1/2) 32

(9 1/2) 225 (3 1/8, 3 1/2) 70 - 250(4 3/4) 150 - 350

(6 1/4, 6 3/4) 150- 750(8) 300 - 1,100

(9 1/2+) 650 - 1,200

APS SureShot Gamma + WPR Propagation Resistivity

3 1/2, 4 3/4, 6 3/4, 8 59 (2 pcs.)* Collar-limited Collar-defined 150 and 175

20 and 25 Configuration-dependent

Configuration-dependent Configuration-dependent

Configuration-dependent (3 1/2) 190 max. (4 3/4) 350 max. (6 3/4) 700 max. (8)

1,200 max.

APS Push-the-Bit Rotary Steerable Motor (RSM)

6 3/4(blades and stabilizers

for 8 1/2 and 8 3/4 holes)

17* Programmable build rates of 0.5 to 5.5. Also, vertical and tangent

angle hold modes.

150 20 250 psi @ 600 gal/min

300 - 600 gal/min

Baker Hughes Dana Morrison - 2929 Allen Parkway, Suite 2100, Houston, TX 77019, (713) 439-8254, dan[email protected] / [email protected]

AutoTrak Curve (High-build rate Rotary

Steerable System, including MWD)

6 3/4 6 3/4in = 37.8 6 3/4in = 30/15 BHA-dependent Standard 150

Standard 20

(a) (a) (a) (a) 6 3/4in = 300-750

AutoTrak G3 (Rotary Steerable System, including OnTrak MWD or

AziTrak Integrated MWD/LWD)

4 3/46 3/48 1/49 1/2

4 3/4in = 50.86 3/4in = 49.98 1/4in = 56.99 1/2in = 58.1

4 3/4in = 30/106 3/4in = 20/138 1/4in = 9/6.59 1/2in = 13/6.5

BHA-dependent Standard 150;

Optional 175 for 6 3/4in, 8 1/4in, 9 1/2in

Standard 20

Optional 25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-900 8 1/4in

= 300-1290 9 1/2in = 300-1,600

AutoTrak X-treme (Rotary Steerable System, including

OnTrak MWD or AziTrak Integrated MWD/LWD and hard-wired, precontoured

modular X-treme mud motor)

4 3/46 3/49 1/2

4 3/4in = 72.66 3/4in = 709 1/2in = 82

4 3/4in = 25/106 3/4in = 16/79 1/2in = 8/3.8


Optional 175 for 6 3/4in, 9 1/2in

Standard 20

Optional 25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

AutoTrak eXpress (Rotary Steerable System including MWD, can be run with hard-

wired modular X-treme motor)

4 3/46 3/49 1/2

4 3/4in = 56.86 3/4in = 58.2 Version 6 3/4in

High Dog Leg = 709 1/2in = 64.6

4 3/4in = 30/106 3/4in = 23/8 Version 6 3/4in

High Dog Leg = 23/129 1/2in = 13/6.5

BHA-dependent 150 20 (a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

AutoTrak V (Rotary Steerable System that

does not require MWD)

4 3/46 3/49 1/2

4 3/4in = 23.16 3/4in = 19.79 1/2in = 22.3

4 3/4in = 30/106 3/4in = 23/8

9 1/2in = 13/6.5


Optional 175 for 6.3/4in, 9.1/2in

Standard 20

Optional 25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

Advanced SLIM MWD system 3 1/8 26.4 50° sliding , Rotation BHA dependant

N/A 150 20 (a) (a) (a) (a) 79 - 180

CoilTrak - Coiled Tubing Drilling System

2 3/8in and 3in on CT 49.5, typical BHA including motor

2 3/8in 50, 3in 45 - sliding only N/A 150 14.5 (a) (a) (a) (a) 2 3/8in max 80, 3in max 211

CoilTrak Rib-Steered Motor (Extended Reach/Straight

Trajectory drilling module for use in conjunction with

CoilTrak system)

3in on CT 19.6 10 - sliding only N/A 150 14.5 (a) (a) (a) (a) 40 - 120

GyroTrak 9.5in 8.25in 6.75in (OnTrak) 3.125in

and larger (NaviTrak/TeleTrak)

16.0 (OnTrak) 29.0 NMDC (NaviTrak/TeleTrak)

Probe limits: (1 3/4) 115/51 N/A 125 20 (a) (a) (a) (a) 300 - 1600 (OnTrak) 100-1600 (NaviTrak)

Gyro-Guide 9.5in 8.25in 6.75in (OnTrak)

16.3 Drill Collar Specs Drill Collar Specs 150 20 (a) (a) (a) (a) 300 - 1600 (OnTrak)

NaviTrak 1 3/4 OD probe; (1 3/4) 3 1/8 and larger

collars

(1 3/4) 22 Probe limits: (1 3/4) 115/51 NMDC Specs 150 20 (a) (a) (a) (a) 75-1600

OnTrak (integrated directional, gamma ray and formation resistivity at mutiple depths

of investigation)

4 3/4, 6 3/4, 8 1/4, 9 1/2

OTK (4 3/4) 20.2, (6 3/4) 17.0, (8 1/4) 19.0, (9

1/2) 18.1

(4 3/4) 33/12, (6 3/4) 25/15, (8 1/4) TBD, (9 1/2) 10/7

NA Standard. 150,

Optional 175

Standard 20; (4-3/4,

6-3/4 & 8-1/4, 9-1/2)

Optional 25; (4-3/4,

6-3/4 & 8-1/4)

Optional 30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 200-900, (8 1/4) 300-1295, (9 1/2)

300-1,600

AziTrak (integrated directional, gamma ray and azimuthal

formation resistivity at mutiple depths of investigation)

4 3/4, 6 3/4 (4 3/4) 40.4, (6 3/4) 35.3 (4 3/4) 33/12, (6 3/4) 25/15, (8 1/4) TBD, (9 1/2) 10/7

NA Standard. 150,

Optional 175

Standard 20; (4-3/4,

6-3/4) Optional

25; (4-3/4, 6-3/4)

Optional 30

(a) (a) (a) (a) (4 3/4) 125-350, (6 3/4) 200-900

E-MTrak 4 3/4, 6 1/2 (4 3/4, 6 1/2) 39.6 Slick collar: (4 3/4) 21/7, (6 1/2) 12.5/6.5

Flexible collar: (4 3/4) 58/32,(6 1/2) 48/25

NMDC Specs 150 20 (a) (a) (a) (a) (4 3/4) max 350, (6 1/2) max 660

TruTrak (Non-rotating Automated

Drilling System including MWD and Optionalional Gamma)

4 3/46 3/4

89 1/2

4 3/4in = 28.36 3/4in = 31.0

8in = 36.19 1/2in = 36.1; Excluding

MWD

4 3/4in = 56 3/4in = 3

8in = 29 1/2in = 2

N/A 150 20 (a) (a) (a) (a) 4 3/4in = 125-3176 3/4in = 264-660

8in = 395-9009 1/2in = 528-1162

TeleTrak (highly LCM tolerant system)

4 3/4,6 1/2, 6 3/4

(4 3/4) 44.5 (6 1/2, 6 3/4) 39.83

Probe limits: (1 3/4) 115/51 NMDC Specs 150 20 (a) (a) (a) (a) (4 3/4) 120- 350 (6 1/2, 6 3/4) 240-750

SDL(Steerable Drilling Liner

including Rotary Steerable System, OnTrak MWD or

AziTrak Integrated MWD/LWD and hard-wired, precontoured modular X-treme mud motor)

4 3/4in BHA with 7in liner

6 3/4in with 9 5/8in liner

User defined 3, rotating only BHA-dependent 150 Standard 20;

Optional 25 & 30

(a) (a) (a) (a) (4 3/4) 125-350, (6 3/4) 200-900

To download the full survey free of charge, please visit our website: www.offshore-mag.com

1208off_68 68 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


DrilTech LLC Brad Vincent - 248 Rousseau Road, Youngsville, LA 70592, (337) 837-1219, [email protected]

Positive Pulse MWD Probe Based

1 7/8 tool OD, 4 3/4 - 8 collars

18-25 60/30 As applicable to standard NMDC 150 - 175

20 (137 mpa)

50 (NMDC dependent)

100 (NMDC dependent) 150 (NMDC dependent) N/A (3 1/2) 50-130, (4 3/4) 130-275, (6 3/4) 235-600,

(8) 400-800

GE Oil & Gas Chau Nguyen - 4424 W. Sam Houston Parkway N. 10th Floor, Houston, TX 77041, (713) 458 3629, [email protected]

Pilot 3 1/2, 4 3/4, 6 1/2, 8, 9 1/2

Shortest probe length 17.8 (4 3/4) 30/15(6 3/4)21/10

(8)14/8

(9 1/2)7/4

(4 3/4) 4.75x2.81, (6 3/4) 6.71x2.81, (8) 7.93x2.81, (9 1/2) 9.42x2.81

150 20 (4 3/4 - 6 3/4) 8 (4 3/4 - 6 3/4) 47 (4 3/4 - 6 3/4) 153 (9 1/2) 450 130-1060

Tensor 3 1/2, 4 3/4, 6 1/2, 8, 9 1/2

Shortest probe length 25.2 (3 1/2) 100/50(4 3/4) 30/15

(6 3/4)21/10

(8)14/8

(9 1/2)7/4

(3 1/2) 2.96x2.25, (4 3/4) 4.75x2.81, (6 3/4) 6.71x4.00, (8) 7.93x2.81, (9 1/2) 9.42x4.00

175 20 (4 3/4 - 6 3/4) 6 (4 3/4 - 6 3/4) 39 (4 3/4 - 6 3/4) 127 (9 1/2) 373 75-1200

Halliburton/Sperry Drilling Billy Hendricks - P.O. Box 60070, Houston, Texas 77205, (281) 871-5396, [email protected]

Electromagnetic Telemetry System

3 1/2, 4 3/4, 6 1/2 (3 1/2) 33.9, (4 3/4) 33.5, (6 1/2) 35.6 (t)

35/14 (3 1/2 flex) 2.9x1.5, (4 3/4 flex) 4.06x2.25, (6 1/2 flex) 4.63x2.81

150 15 (3 1/2) 171, (4 3/4) 139, (6 1/2) 40

(4 3/4) 400, (6 1/2) 150 N/A N/A

Negative Pulse Telemetry System

6 3/4, 8, 9 1/2 9.2 (6 3/4) 21/10, (8, 9 1/2) 14/8 (6 3/4) 6.54x2.81, (8) 7.76x2.81, (9 1/2) 9.35x3 150 18 std., 25 opt.

(6 3/4, 8) 17, (9 1/2) 4 (6 3/4, 8) 31, (9 1/2) 7 (6 3/4, 8) 182, (9 1/2) 36 (x)

Positive Pulse Telemetry System

3 3/8, 3 1/2, 4 3/4, 6 1/2, 6 3/4, 7 1/4,

8, 9 1/2

(3 3/8, 3 1/2) 21, (4 3/4 - 9 1/2) 26

(3 3/8 - 4 3/4) 30/14, (6 1/2 - 7 1/4) 21/10, (7 3/4 - 9 1/2) 14/8

(3 3/8) 3.21x1.5, (3 1/2) 3.35x1.5, (4 3/4) 4.66x2.25, (6 1/2 - 9 1/2) Equivalent to a

standard NMDC

150 std. 175 opt.

20, 22.5, 25, 30

(3 3/8, 3 1/2) 120 at 150 gal/min

(4 3/4) 140 170 380 (3 3/8, 3 1/2) 90-200, (4 3/4) 150-350, (6 1/2 -9 1/2)

225-650, (7 1/4 - 9 1/2) 400-1,500

MWD Gyro 6 3/4, 8, 9 1/2 25.8 (6 3/4) 21/10, (8) 14/8, (9 1/2) 14/8

Equivalent to standard NMDC 150 20 (6 3/4, 8) 17, (9 1/2) 4 (6 3/4, 8) 31, (9 1/2) 7 (6 3/4, 8) 182, (9 1/2) 36 225-1500

MWD Services LLC. Clyde Cormier - P O Box 750, or 219 Griffin Rd, Youngsville, LA 70592, (337) 856-5965, [email protected]

MWD Shuttle 1 7/8 tool OD, 3 1/8 - 9 1/2

22.7 w/single battery, 29.1 w/dual battery

60/30 As applicable to standard NMDC 150 20 40 80 150 75-1,000

Navigate Energy Services Steve Krase - 15700 International Plaza Drive, Suite 150, Houston, TX 77032, 832-300-0030, [email protected]

Drift 6 1/2, 8, & 9 1/2 8 ft API conn limited TBD 150 20 N/A 60 125 N/A 250-1300

Directional 4 3/4, 6 1/2, 8 available Q4 ‘09

(4 3/4) 10, ( 6 1/2 & 8) 10 (4 3/4) 32/16, (6 3/4) TBD, (8) TBD

As applicable to standard NMDC 150 20 N/A 60 125 N/A 225-1000

PathFinder, a Schlumberger company Allan Rennie - 23500 Colonial Pkwy, Katy, TX 77493, (281) 769-4501, [email protected]

HDS-1L Directional Survey 4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

30 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81,

(9 1/2) 9.5x3

150 20 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45, ( 8 HF,

9 1/2) N/A

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

HDS-1M Directional 6 3/4, 8 LF, 8 HF, 9 1/2 26.6 (6 3/4) 17/9, (8 LF) 18/10, (8 HF) 18/10, (9 1/2) 12/6

(6 3/4) 6.43x2.81, (8 LF) 7.85x2.81, (8 HF) 7.60x2.81, (9 1/2) 9.36x3.00

150 20 (6 3/4, 8 LF, 8 HF, 9 1/2) N/A

(6 3/4) 50, (8 LF, 8 HF, 9 1/2) N/A

(6 3/4) 90, (8 LF) 90, (8 HF, 9 1/2) 40

(6 3/4, 8 LF, 8 HF), N/A (9 1/2) 200

(6 3/4) 315-750, (8 LF) 315-950, (8 HF) 375-1125, (9 1/2)

500-1500

HDS-1R Directional 3 1/8 - 9 1/2 30 60/30 Dependant on drill collar As applicable to standard NMDC 150 20 250 250 250 250 (2 1/4) 60-180, (2 1/2) 140-280, (2 11/16) 180-350, (2

13/16) 250-550, (3 1/4) 300-1,000 (3 1/2) 600-1,500

HDS-1S Directional 4 3/4, 6 3/4, 8 LF, 8 HF

16 (4 3/4) 31/17,(6 3/4) 17/9, (8 LF) 18/9, (8 HF) 18/9

(4 3/4) 4.69x2.25, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81

150 20 (4 3/4) 40, (6 3/4, 8 LF, 8 HF) N/A

(4 3/4) 50, (6 3/4, 8 LF) 45, (8 HF) N/A

(4 3/4) N/A, (6 3/4) 50, (8 LF) 50, (8 HF) 45

(4 3/4, 6 3/4, 8 LF) N/A, (8 HF) 200

(4 3/4) 125-375, (6 3/4) 250-750, (8 LF) 250-950, (8 HF)

375-1,125

Survivor HDS-1 Directional 4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

30 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.95x2.81,

(9 1/2) 9.5x3.0

175 25 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45,( 8 HF,

9 1/2) NA

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

Survivor HDS-1R Directional 3 1/8 - 9 1/2 30 60/30 Dependant on drill collar As applicable to standard NMDC 175 25 250 250 250 250 (2 1/4) 60-180, (2 1/2) 80-280, (2 11/16) 100-350, (2 13/16)

150-550, (3 1/4) 300-1,000 (3 1/2) 600-1,500

Survivor HDS-1S Directional 4 3/4, 6 3/4, 8 LF, 8 HF

16 (4 3/4) 31/17,(6 3/4) 17/9, (8 LF) 18/9, (8 HF) 18/9

(4 3/4) 4.69x2.25, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81

175 25 (4 3/4) 40, (6 3/4, 8 LF, 8 HF) N/A

(4 3/4) 50, (6 3/4, 8 LF) 45, (8 HF) N/A

(4 3/4) N/A, (6 3/4) 50, (8 LF) 50, (8 HF) 45

(4 3/4, 6 3/4, 8 LF) N/A, (8 HF) 200

(4 3/4) 125-375, (6 3/4) 250-750, (8 LF) 250-950, (8 HF)

375-1,125

Payzone Inclination Gamma 4 3/4, 6 3/4 7.13 upper, 2.7 lower (4 3/4) 31/17, (6 3/4) 17/9 (4 3/4) 4.66x2.25, (6 3/4) 6.57x2.81 150 20 N/A (4 3/4) 70, (6 3/4) 20 (4 3/4) N/A, (6 3/4) 35 N/A (4 3/4) 125-375, (6 3/4) 250-750

Imaging Payzone Inclination Gamma

4 3/4, 6 3/4, 8 7.13 upper, 3.33 lower, 5.92 upper, 3.66 lower, 5.92

upper, 3.66 lower

(4 3/4) 31/17, (6 3/4) 16/10, (8) 16/10

(4 3/4) 4.43x2.25, (6 3/4) 5.99x2.81, (8) 6.99x2.81

175 (4 3/4), (6 3/4) 25, (8) 20

N/A (4 3/4) 70, (6 3/4) 20 (4 3/4) N/A, (6 3/4) 35, (8) 20

N/A (4 3/4) 125-375, (6 3/4) 250-750, (8) 250-1125

Gyro HDS1 4 3/4, 6 3/4, 8LF, 8 HF, 9 1/2

30 (4 3/4) 31/17, (6 3/4) 17/9, (8 LF) 18/9, (8 HF) 18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81, (9 1/2) 9.39x3

150 20 (4 3/4) 40 (6 3/4, 8 LF, 8 HF, 9

1/2) N/A

(4 3/4) 50, (6 3/4, 8 LF) 45, (8 HF, 9 1/2) N/A

(4 3/4) N/A, (6 3/4, 8 LF) 50, (8 HF, 9 1/2) 50

(4 3/4, 6 3/4, 8 LF) N/A, (8 HF, 9 1/2) 200

(4 3/4) 125-375, (6 3/4) 250-600, (8 LF) 250-950, (8 HF) 375-1,125 (9 1/2) 500-1,500

Gravity HDS1 4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

46 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81,

(9 1/2) 9.5x3

150 20 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45, (8 HF,

9 1/2) N/A

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

Survivor Gravity HDS1 4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

46 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.98x2.81,

(9 1/2) 9.5x3

175 25 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45,( 8 HF,

9 1/2) N/A

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

Slim Array Wave Resistivity 4.75 20 30/15 4.72x2.25 150 25 6 29 N/A N/A 120-375

Survivor Slim Array Wave Resistivity

4.75 20 30/15 4.72x2.25 175 25 6 29 N/A N/A 120-375

Array Wave Resistivity 6 3/4, 8, 9 1/2 20 (6 3/4) 16/10, (8, 9 1/2) 16/10 (6 3/4) 6.4x2.81, (8) 8.9x3, (9 1/2) 8.9x3 150 (6 3/4, 8, 9 1/2) 25

N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125,

(9 1/2) 250-1,500

Survivor Array Wave Resistivity 6 3/4, 8, 9 1/2 20 (6 3/4) 16/10, (8, 9 1/2) 16/10 (6 3/4) 6.4x2.81, (8) 8.9x3, (9 1/2) 8.9x3 175 (6 3/4, 8, 9 1/2) 25

N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125,

(9 1/2) 250-1,500

www.offshore-mag.com • August 2012 Offshore 69

1208off_69 69 8/2/12 2:14 PM


Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


Ryan Directional Services Randy Starnes - 19510 Oil Center Blvd., Houston, TX 77073, (281) 443-1414, [email protected]

Ryan EM 4 3/4, 6.5, 6 3/4 34 (4 3/4) 75° / 20° (6 3/4) 28°/11° (4 3/4) 4.75x2.81 (6 3/4) 6.71x3.25 175C 20K PSI (137 mpa)

8 47 153 450 (4 3/4) 100-350 (6 3/4) 150-800

Ryan Mud Pulse 3 1/8, 4 3/4, 6.5, 6 3/4, 8, 9.5

20-30 (3 1/8) 100°/ 50° (4 3/4) 40° / 15° (6 3/4) 28°/11°

(8) 15°/9° (9.5) 8°/ 5°

(3 1/8) 2.96x2.25 (4 3/4) 4.75x2.81 (6 3/4) 6.71x3.25 (8) 7.93x4.00

(9.5) 9.42x4.00

175C 20K PSI (137 mpa)

8 47 153 450 (3 1/8) 50-175 (4 3/4) 100-350 (6 3/4) 150-800

(8) 400-925 (9 1/2) 400-1200

Schlumberger Mike Williams - 281-285-8500

PowerDrive X5Rotary Steerable Tool

4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4) 14.95, (6 3/4 ) 13.48, (8 1/4 , 9 ) 14.6, (11 ) 15.1

Capability (°/100 ft) : (4 3/4 , 6 3/4) 8, (8 1/4 ) 6, (9 ) 5, (11 ) 3Pass Through (°/100 ft): (4 3/4) 30/15, (6 3/4 , 8.25 , 9 ) 20/10,

(11 ) 15/8

150 20 std,30 opt. (4 3/4, 6 3/4)

N/A 36(600 - 750 psi required

across bit)

30(600 - 750 psi required

across bit)


across bit)

220-1,900


4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4) 14.95, (6 3/4 ) 13.48, (8 1/4 , 9 ) 14.6, (11 ) 15.1

Capability (°/100 ft) : (4 3/4 , 6 3/4) 8, (8 1/4 ) 6, (9 ) 5, (11 ) 3Pass Through (°/100 ft): (4 3/4) 30/15, (6 3/4 , 8.25 , 9 ) 20/10,

(11 ) 15/8

150 std., 175

opt.

20 std,30 opt. (4

3/4),35 opt. (6 3/4, 8 1/4)

36(600 - 750 psi required across bit)


across bit)


across bit)


across bit)

100-2,000

PowerDrive ArcherRotary Steerable Tool

6 3/4 (6 3/4 ) 16.64 Capability (°/100 ft) : (6 3/4) 15 Pass Through (°/100 ft): (6 3/4) , >15 Based on fatigue

management

150 20 N/A N/A 30(600 - 750 psi required

across bit)

N/A 250-650

Power Drive XceedRotary Steerable Tool

6 3/4 , 9 (6 3/4 ) 25, (9) 28 Capability (°/100 ft) : (6 3/4) 8, (9) 6.5

Pass Through (°/100 ft): (6 3/4) 15/8, (9) 12/6.5

(6 3/4) 31, (9) 35.9 150 20 N/A N/A 60 N/A 290-1800

PowerVVertical drilling

Rotary Steerable Tool

4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4 ) 14.95, (6 3/4 ) 13.48, (8 1/4 , 9 ) 14.6, (11 ) 15.1

Capability (°/100 ft) : (4 3/4 , 6 3/4 , 8 1/4 ) 8, (9 ) 5, (11 ) 4

Pass Through (°/100 ft): (4 3/4 ) 30/15, (6 3/4 , 8.25 , 9 ) 20/10,

(11 ) 15/8

150 std., 175

opt.

20 std,30 opt. (4

3/4),35 opt. (6 3/4, 8 1/4)


across bit)


across bit)


across bit)

100-2,000

PowerDrive vorteX Xceed 6 3/4 , 9 (6 3/4) 55, (9) 58 Capability (°/100 ft) : (6 3/4) 8, (9) 6.5

Pass Through (°/100 ft): (6 3/4) 15/8, (9) 12/6.5

N/A 150 20 N/A 235 N/A N/A 290-1800

PowerDrive vorteX 4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4) 30, (6 3/4) 43, (8 1/4) 49.6. (9, 11) 50.6

Capability (°/100 ft) : (4 3/4 , 6 3/4) 8, (8 1/4, 9) 6, (11) 3

Pass Through (°/100 ft): (4 3/4) 30/15, (6 3/4 , 8 1/4, 9) 20/10,

(11) 15/8

N/A 150 std., 175 opt. (4 3/4. 6 3/4, 8

1/4)

20 std,30 opt. (4

3/4),35 opt. (6 3/4, 8 1/4)

N/A 235 250, 200 350 130 - 2,000

PowerPak ERT high performance positive displacement motors

4 3/4, 6 3/4, 8, 9 5/8 17.3 (4 3/4), 16.3 (6 3/4), 30.2 (8), 30 (9 5/8)

As per motor specification for bend setting

N/A 175 30 Dependent on specific model

Dependent on specific model



125-325 (4 3/4), 300-650 (6 3/4), 300-900 (8), 600-1200

(9 5/8)

PowerPak HR higher torque positive displacement motors

4 3/4, 6 3/4,7, 8, 9 5/8, 11 1/4

Dependent on specific model As per motor specification for bend setting

N/A 175 30 Dependent on specific model




125-325 (4 3/4), 300-600 (6 3/4 and 7), 300-900 (8),

600-1200 (9 5/8), 800-1800 (11 1/4)

ImPulse 4.75 32 30/15 4.75x2.25x38.5 150 std., 175

opt.

20 std., 27.5 opt.

N/A 125 (varies with Modulator gap)

N/A N/A 130-400

ShortPulse 4 3/4 27.3 30/15 4.75x2.25x34.8 -OR-

4.59x2.25x30.3

150 std., 175

opt.

20 N/A 125 (varies with Modulator gap)

N/A N/A 130-400

PowerPulse 6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56(8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)

(8 1/4, 9 1/2) 595 (varies with modulator gap)

(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

TeleScope 6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56 (8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)


(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

SlimPulse 1 3/4 tool OD3 1/8 to 9 1/2 collars

Collar based probenormally 30

(4 3/4 and smaller) 145/40(6 3/4) 28/10(8 1/4) 20/8(9 1/2) 19/7

(4 3/4) 4.75x2.81x33(6 3/4) 6.75x2.81x32

150 std., 175

opt.

22 (4 3/4) 68(6 3/4) 16

(6 3/4) 100(8 1/4) 18

(6 3/4) 324(8 1/4, 9 1/2) 58

(8 1/4, 9 1/2) 411 Multiple configurations: 35-1,200

GyroPulse 6 3/4”,8 1/4, 9, 9 1/2 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

(8 1/4) 8.25x3.5x26.2 (9) 9x3.5x28 (9 1/2) 9.5x3.5x26.2

150 25 N/A N/A 4 26 (6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

Sharewell Energy Services Heather Heacock - 12200 W. Little York Rd., Houston, TX 77041, [email protected]

Directional Electro-Trac EM MWD

4 3/4 6 1/2 6 3/47 3/4

25.5’ (adjusted to Monel length)

collar limited Collar-defined 150 20 25 100 100 100 50-1200

Weatherford Jeff Whitney - 16178 West Hardy Rd., Houston, TX 77060, [email protected]

Revolution Rotary Steerable 4 3/4, 6 3/4, 8 1/4, 9.5 (4-3/4”) 12’, (6-3/4”) 14’, (8 1/4”) 17’

(4 3/4) 10, (6 3/4), 8, (8 1/4) 7 150 20 std.25 opt.

20 35 55 N/A (4 3/4) 350; (6 3/4) 750; (8 1/4) 1,500

High Temperature Rotary Steerable (Revolution HT)

4 3/4, 6 3/4, 8 1/4, 9.5 (4-3/4”) 12’, (6-3/4”) 14’, (8 1/4”) 17’

(4 3/4) 10, (6 3/4), 8, (8 1/4) 7 165 std.180 opt.

25 20 35 55 N/A (4 3/4) 350; (6 3/4) 750; (8 1/4) 1,500

MotarySteerable

4 3/4, 6 3/4, 7 7/8, 8 1/4

65.0 (4 3/4) 25/16, (6 1/4) 20/14, (6 3/4) 18/13, (8) 15/10

150 std.180 opt.

20 std.25 opt.

(4 3/4) 150-300; (6 3/4, 7 7/8, 8) 200-600; (8 1/4) 300 -900

EMpulse (Electromagnetic) All sizes (3 1/16) 28.4, (4 3/4) 33.1, (6 3/4) 34.8, (8) 35.4, (9

1/2) 36.4

(3 1/6) 116/38, (4 3/4) 25/16, (6 1/4) 20/14, (6 3/4) 18/13, (8)

15/10, (9 1/2) 14/7.5

(3 1/16) 3.06x2.16, (3 3/8) 3.38x2.16, (4 3/4) 4.53x2.25, (6 3/4) 6.59x2.81, (8) 7.78x2.81,

(9 1/2) 9.69x3

150 15 (3 1/16, 3 3/8, 3 1/2) 100; (4 3/4) 8; (6 1/4) 9

(4 3/4) 20; (6 1/4) 25, (6 3/4, 8) 7; (9.5) 4

(6 3/4, 8) 20; (9.5) 13 (3 1/16, 3 3/8, 3 1/2) 160; (4 3/4, 6 1/4) 350; (6 3/4) 800

HEL (Hostile Environment Logging)

4-3/4, 6-3/4, 8, 8-1/4, 9-1/2

(4-3/4) 19.5, (6-3/4) 19.7, (8-1/4) 20.0, (9-1/2) 20.0

(4-3/4) 30/15, (6-3/4), 16/8, (8, 8-1/4) 14/7, (9-1/2) 12/6

(4 3/4) 4.75x3.22, (6 3/4) 6.75x4.20, (8 1/4) 8.25x5.17, (9 1/2) 9.50x5.16

150 std.180 opt.

(4.75, 6.75, 8”) 20 std.,

30 opt.(8.25, 9.5) 20 std., 25

opt.

(4 3/4) 12, (6 3/4, 8) 2, (8 1/4,

9-1/2) 1

(4 3/4) 64, (6 3/4, 8) 9, (8 1/4, 9-1/2) 2

(4 3/4) 193, (6 3/4, 8) 26, (8 1/4, 9 1/2) 2

(6 3/4, 8) 170, (8-1/4, 9-1/2) 33

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

1208off_70 70 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


HyperPulse All sizes 31 (3 1/6) 116/38, (4 3/4) 25/16, (6 1/4) 20/14, (6 3/4) 18/13, (8)

15/10, (9 1/2) 14/7.5

(4 3/4) 4.75x2.69, (6 1/4) 6.25x3.25, (6 3/4) 6.75x3.25

150 15 100 140 200 70-1,000

TrendLine 6-3/4, 8-1/4, 9-1/2 Dependent on drill collar length - 26’ minimum

(6-3/4) 8/16, (8-1/4) 7/14, (9-1/2) 6/12

150 20 (4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

Drill String Dynamics

Ryan Directional Services

Ryan Dynamic Module 3 1/8, 4 3/4, 6.5, 6 3/4, 8, 9.5

16.4 (3 1/8) 100°/ 50° (4 3/4) 40° / 15° (6 3/4) 28°/11°

(8) 15°/9° (9.5) 8°/ 5°

(3 1/8) 2.96x2.25, (4 3/4) 4.75x2.81, (6 3/4) 6.71x3.25, (8) 7.93x4.00, (9.5) 9.42x4.00

175C 20K PSI (137 mpa)

8 47 153 450 (3 1/8) 50-175, (4 3/4) 100-350, (6 3/4) 150-800, (8)

400-925, (9 1/2) 400-1200

Drilling Mechanics

APS Technology (Rental Division)

APS SureShot with Gamma + VMM + PWD

3 1/8, 3 1/2, 4 3/4, 6 1/4,

6 3/4, 8, 9 1/2+


20 and 25 (3 1/2) 29,(4 3/4 - 6 3/4) 6,

(8) 3,(9 1/2) 2

(3 1/2) 165,(4 3/4 - 6 3/4) 40,

(8) 20,(9 1/2) 10

(6 1/2 - 6 3/4) 114,(8) 61,

(9 1/2) 32

(9 1/2) 225 (3 1/8, 3 1/2) 70 - 250(4 3/4) 150 - 350

(6 1/4, 6 3/4) 150- 750(8) 300 - 1,100

(9 1/2+) 650 - 1,200

APS SureShot Gamma + VMM + PWD + WPR Propagation

Resistivity





1,200 max.

Drilling Dynamics Monitor (DDM)

6 3/4, 8 6 14,10 (6 3/4)10, 8 (8)

150 20

Vibration Memory Sub (VMS) 4 3/4, 6 3/4, 8 5.5 150 20

Magnetorheological Active Vibration Damper (AVD)

6.75 32 10 150 20

Baker Hughes

Acoustic Caliper 4 3/4, 6 3/4, 8 1/4 As per LithoTrak service As per LithoTrak service As per LithoTrak service As per LithoTrak service

As per LithoTrak service

(a) (a) (a) (a) As per LithoTrak service

Vibration Stick Slip (AutoTrak eXpress and AutoTrak-V

systems)

4 3/46 3/49 1/2

As per directional tool specification


As per directional tool specification As per direc-tional tool

specifi-cation

As per directional

tool specification

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

Annular Pressure plus Vibration Stick Slip (AutoTrak G3,

AutoTrak X-treme, AziTrak and OnTrak systems)

4 3/4in - 9 1/2in, as per directional tool

specification




specifi-cation

As per directional

tool specification

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-900 8 1/4in

= 300-1290 9 1/2in = 300-1,600

Annular Pressure plus Vibration Stick Slip (E-MTrak, NaviTrak

and TeleTrak systems)

3 1/8in - 6 3/4in, as per directional tool

specifications




specifi-cation

As per directional

tool specification

(a) (a) (a) (a) As per directional tool specification

CoPilot (Drilling Optionalimisation and Downhole Analysis)

4 3/4, 6 3/4, 8 1/4, 9 1/2

(4 3/4) 8.9, (6 3/4) 7, (8 1/4) 8.1, (9 1/2) 7.5


N/A 150 Standard 20, Optional

25

(a) (a) (a) (a) (4 3/4) 100-350, (6 3/4) 200-800, (8 1/4) 300-1,600

Drilling Performance Sub (CoilTrak system and Advanced

SLIM MWD system)

2 3/8 ; 3 (CoilTrak only), 3 1/8

49.5, typical BHA including motor

(2 3/8) 50, (3) 45 - sliding only N/A 150 14.5 (a) (a) (a) (a) 2 3/8in max 80, 3in max 211

Halliburton/Sperry Drilling

AcoustiCaliper 6 3/4, 8 (6 3/4) 6, (8) 7.7 (6 3/4) 21/10, (8) 14/8 (6 3/4) 6.45x2.81, (8) 7.81x2.81 150 18 (6 3/4) 3, (8) 4 (6 3/4) 10, (8) 12 (6 3/4) 57, (8) 73

Drillstring Dynamics 4 3/4, 6 3/4, 8, 9 1/2 Part of some dual gamma ray tools, see below

150

Pressure While Drilling 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 10.8, (6 3/4, 8) 4.51, (9 1/2) 4.45

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.66x2.25, (6 3/4) 6.54x2.81, (8) 7.76x2.81, (9 1/2) 9.35x3

175 18 - 25 (4 3/4) 70, (6 3/4, 8) 2, (9 1/2) 1

(4 3/4) 190, (6 3/4, 8) 7, (9 1/2) 2

(6 3/4, 8) 42, (9 1/2) 14

Vibration Severity 4 3/4, 6 3/4, 8, 9 1/2 Part of pressure-while-drilling tool (see above) as well as

some other tools

175

Annular Mud Temperature 8 25.3 (part of EWR-M5 tool) 14/8 7.65 x 2.81 150 25 N/A 5 13 75

Drilling Downhole Optimization Collar (DrillDOC)

6 3/4, 8 7.36 (6 3/4) 21/10, (8) 14/8 (6 3/4) 6.63x2.81, (8) TBD 175 25 (6 3/4) 4, (8) 2 (6 3/4) 11, (8) 4 (6 3/4) 59, (8) 22

PathFinder, a Schlumberger company

Drilling Formation Tester 6.75 37 16/7 6.37x2.81 150 20 N/A N/A 70 N/A 275-750

Dynamic Pressure Module 4 3/4, 6 3/4, 8, 9 1/2 4.7 (4 3/4) 30/16.6, (6 3/4) 17.5/9, (8) 19/11, (9 1/2) 13/7

(4 3/4) 4.5x2.25, (6 3/4) 6.44x2.81, (8) 7.18x2.81, (9 1/2) 8.82x2.81

150 20 (4 3/4) 22 at 150 gal/min

(4 3/4) 58, (6 3/4) 26, (8, 9 1/2) N/A at 400

(4 3/4) N/A (6 3/4) 49, (8) 39, (9 1/2)

39 at 750

(4 3/4) N/A (6 3/4) 65, (8) 52, (9 1/2) 52 at 1000

(4 3/4) 125-375, (6 3/4) 250-750, (8) 400-1,500, (9 1/2)

500-1,500

Survivor Dynamic Pressure Module

4 3/4, 6 3/4 8.5 (4 3/4) 30/17, (6 3/4) 18/9 (4 3/4) 4.5x2.25, (6 3/4) 6.44x2.81 175 25 (4 3/4) 22 at 150 gal/min

(4 3/4) 58, (6 3/4) 26 (4 3/4) N/A (6 3/4) 49, N/A (4 3/4) 125-375, (6 3/4) 250-750




upper, 3.66 lower

(4 3/4) 31/17, (6 3/4) 16/10, (8) 16/10

(4 3/4) 4.43x2.25, (6 3/4) 5.99x2.81, (8) 6.99x2.81

175 (4 3/4), (6 3/4) 25, (8) 20

N/A (4 3/4) 70, (6 3/4) 20 (4 3/4) N/A, (6 3/4) 35, (8) 20

N/A (4 3/4) 125-375, (6 3/4) 250-750, (8) 250-1125

Schlumberger

ImPulse*Downhole shocks

*Downhole flow/washout*APWD (with VisionPWD sub)

4.75 32 30/15 4.75x2.25x38.5 150 std., 175

opt.

20 std., 27.5 opt.

20 125 (varies with Modulator gap)

N/A N/A 130-400


1208off_71 71 8/2/12 2:14 PM


Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


ShortPulse*Downhole shocks

*Downhole flow/washout*APWD (with VisionPWD sub)

4.75 27.3 30/15 4.75x2.25x34.8 -OR-

4.59x2.25x30.3

150 std., 175

opt.

20 20 125 (varies with Modulator gap)

N/A N/A 130-400

VisionPWD *APWD *IPWD 4.75 13.6 30/15 4.75x2.25x38.5 150 std., 175

opt.

25 5 29 N/A N/A 0-400

PowerPulse*APWD

*3 axis Vibrations (MVC)*Downhole WOB*Downhole TORQ

*Downhole flow/washout

6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56(8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)


(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

TeleScope*APWD

*3 axis vibrations (MVC)*Downhole WOB*Downhole TORQ


6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56 (8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)


(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

SlimPulse*Shocks

*Stick Slip

1 3/4 tool OD3 1/8 to 9 1/2 collars


(4 3/4 and smaller) 145/40(6 3/4) 28/10(8 1/4) 20/8(9 1/2) 19/7

(4 3/4) 4.75x2.81x33(6 3/4) 6.75x2.81x32

150 std., 175

opt.

22 (4 3/4) 68, (6 3/4) 16

(6 3/4) 100, (8 3/4) 18 (6 3/4) 324, (8 3/4, 9 3/4) 58

(8 3/4, 9 3/4) 411 Multiple configurations: 35-1200

EcoScope*APWD dynamic and static

*Multi-axis shock & vibration (MVC)

*Ultrasonic caliper (UCAL) *Density caliper (DCAL)

6 3/4 with 7 7/8, 8 3/8, or 9 3/8 Stabilizer

Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

NeoScope*APWD dynamic and static

*Multi-axis shock & vibration (MVC)

*Ultrasonic caliper (UCAL)

6 3/4 with 8 3/8 stabilizer

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

proVISION (Magnetic Resonance while Drilling)*3 axis motion detection

*Shocks*Stick Slip


6 3/4 with Slick, 8 1/4, or 9 3/8 Stabilizer

Options

37.3 16/8 6.5x2.81x36.5 150 18 4 25 81 N/A 300-800

Weatherford

BAP (Borehole/Annular Pressure)

4-3/4, 6-3/4, 8, 8-1/4, 9-1/2

Added to HEL length - (4-3/4) 2.71, (6-3/4) 2.67, (8-1/4,

9-1/2) 2.67

(4-3/4) 30/15, (6-3/4), 16/8, (8, 8-1/4) 14/7, (9-1/2) 12/6

(4-3/4) 4.75x3.22, (6-3/4) 6.75x4.24, (8-1/4) 8x4.28, (9-1/2) 9.5x5.16

150 std.180 opt.

(4.75, 6.75, 8”) 20 std.,

30 opt.(8.25, 9.5) 20 std., 25

opt.

(4 3/4) 12, (6 3/4, 8) 2, (8 1/4,

9-1/2) 1

(4 3/4) 64, (6 3/4, 8) 9, (8 1/4, 9-1/2) 2

(4 3/4) 193, (6 3/4, 8) 26, (8 1/4, 9 1/2) 2

(6 3/4, 8) 170, (8-1/4, 9-1/2) 33

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

TVM (True Vibration Monitor) 4-3/4, 6-3/4, 8, 8-1/4, 9-1/2

No additional Length N/A, Electronic Boards N/A, Electronic Boards 150 std.180 opt.

N/A, Electronic Boards


N/A, Electronic Boards N/A, Electronic Boards N/A, Electronic Boards N/A, Electronic Boards

ESM (Environmental Severity Measurement)

4-3/4, 6-3/4, 8, 8-1/4, 9-1/2

No additional Length N/A, Electronic Boards N/A, Electronic Boards 150 std.180 opt.



N/A, Electronic Boards N/A, Electronic Boards N/A, Electronic Boards N/A, Electronic Boards

RAT (Rapid Annular Temperature)

4-3/4, 6-3/4, 8, 8-1/4, 9-1/2

No additional Length N/A, External Sensor N/A, External Sensor 150 std.180 opt.

(4-3/4, 6-3/4, 8-1/4,

9-1/2) 20 std., 30

opt.(8.25, 9.5) 20 std., 25

opt.

N/A, External Sensor

N/A, External Sensor N/A, External Sensor N/A, External Sensor N/A, External Sensor

Gamma Ray


APS SureShot 3 1/8, 3 1/2, 4 3/4, 6 1/4,

6 3/4, 8, 9 1/2+


20 and 25 (3 1/2) 27,(4 3/4 - 6 3/4) 6,

(8) 3,(9 1/2) 2

(3 1/2) 150,(4 3/4 - 6 3/4) 35,

(8) 20,(9 1/2) 10

(6 1/2 - 6 3/4) 114,(8) 61,

(9 1/2) 32

(9 1/2) 220 (3 1/8, 3 1/2) 70 - 250(4 3/4) 150 - 350

(6 1/4, 6 3/4) 150- 750(8) 300 - 1,100

(9 1/2+) 650 - 1,200

APS SureShot with Gamma 3 1/8, 3 1/2, 4 3/4, 6 1/4,

6 3/4, 8, 9 1/2+


20 and 25 (3 1/2) 29,(4 3/4 - 6 3/4) 6,

(8) 3,(9 1/2) 2

(3 1/2) 165,(4 3/4 - 6 3/4) 40,

(8) 20,(9 1/2) 10

(6 1/2 - 6 3/4) 114,(8) 61,

(9 1/2) 32

(9 1/2) 225 (3 1/8, 3 1/2) 70 - 250(4 3/4) 150 - 350

(6 1/4, 6 3/4) 150- 750(8) 300 - 1,100

(9 1/2+) 650 - 1,200

APS SureShot Gamma + WPR Propagation Resistivity





1,200 max.

APS SureShot Gamma + PWD + WPR Propagation

Resistivity





1,200 max.

Baker Hughes

AutoTrak Curve (High-build rate Rotary

Steerable System, including MWD)

6 3/4 6 3/4in = 37.8 6 3/4in = 30/15 BHA-dependent Standard 150

Standard 20

(a) (a) (a) (a) 6 3/4in = 300-750

AutoTrak G3 and AutoTrak X-treme

(Rotary Steerable System, including OnTrak MWD or

AziTrak Integrated MWD/LWD, +/- hard-wired precontoured


4 3/46 3/4

8 1/4 (ATK G3 only)9 1/2

ATK G3 4 3/4in = 50.86 3/4in = 49.98 1/4in = 56.9

9 1/2in = 58.1 ATK X-treme 4 3/4in = 72.66 3/4in = 709 1/2in = 82

ATK G3 4 3/4in = 30/106 3/4in = 20/138 1/4in = 9/6.5

9 1/2in = 13/6.5 ATK X-treme 4 3/4in = 25/106 3/4in = 16/79 1/2in = 8/3.8


Optional. 175 for 6.3/4in, 8.1/4in, 9.1/2in

Standard. 20Optionalional

25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-900 8 1/4in

= 300-1290 9 1/2in = 300-1,600

AutoTrak eXpress (Rotary Steerable System including MWD, can be run with hard-

wired modular X-treme motor)

4 3/46 3/49 1/2

4 3/4in = 56.86 3/4in = 58.2 Version 6 3/4in

High Dog Leg = 709 1/2in = 64.6

4 3/4in = 30/106 3/4in = 23/8 Version 6 3/4in

High Dog Leg = 23/129 1/2in = 13/6.5

BHA-dependent 150 20 (a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

1208off_72 72 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


AutoTrak V (Rotary Steerable System that

does not require MWD)

4 3/46 3/49 1/2

4 3/4in = 23.16 3/4in = 19.79 1/2in = 22.3

4 3/4in = 30/106 3/4in = 23/8

9 1/2in = 13/6.5


Optional. 175 for 6.3/4in, 9.1/2in

Standard. 20Optionalional

25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-9009 1/2in = 300-1600

DGS (CoilTrak system and Advanced SLIM MWD system)

2 3/8 (CoilTrak only), 3 1/8

49.5, typical BHA including motor

(2 3/8) 50, (3) 45 - sliding only N/A 150 14.5 (a) (a) (a) (a) (2 3/8) max 80, (3) max 210

OnTrak (integrated directional, gamma ray and formation

resistivity at mutiple depths of investigation)

4 3/4, 6 3/4, 8 1/4, 9 1/2

(4 3/4) 20.2, (6 3/4) 17.0, (8 1/4) 19.0, (9 1/2) 18.1

(4 3/4) 33/12, (6 3/4) 25/15, (8 1/4) TBD, (9 1/2) 10/7

NA Standard. 150,

Optional. 175

Standard 20 (4-3/4,

6-3/4 & 8-1/4, 9-1/2)

Optional. 25, (4-3/4,

6-3/4 & 8-1/4)

Optional. 30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 200-900, (8 1/4) 300-1295, (9 1/2)

300-1,600



4 3/4, 6 3/4 (4 3/4) 40.4, (6 3/4) 35.3 (4 3/4) 33/12, (6 3/4) 25/15 NA Standard. 150,

Optional. 175

Standard 20 (4-3/4,

6-3/4) Optional.

25, (4-3/4, 6-3/4)

Optional. 30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 200-900

E-MTrak 4 3/4, 6 1/2 (4 3/4, 6 1/2) 39.6 Slick collar: (4 3/4) 21/7, (6 1/2) 12.5/6.5

Flexible collar: (4 3/4) 8/32,(6 1/2) 48/25

NA 150 20 (a) (a) (a) (a) (4 3/4) max 350, (6 1/2) max 660

NaviTrak 1 3/4 OD probe; 3 1/8 and larger collars

(1 3/4) 4 Probe limits: (1 3/4) 115/51 NA 150 20 (a) (a) (a) (a) (1 3/4) 75-1600

Near Bit Gamma 4 3/4, 9 1/2 4.77 (z) N/A 150 Standard 20, Optional

25

(a) (a) (a) (a) 300-1,600, function of MWD platform

TruTrak (Non-rotating Automated

Drilling System including MWD and Optionalional Gamma)

4 3/46 3/4

89 1/2

4 3/4in = 28.36 3/4in = 31.0

8in = 36.19 1/2in = 36.1 Length does

not consider MWD

4 3/4in = 56 3/4in = 3

8in = 29 1/2in = 2

N/A 150 20 (a) (a) (a) (a) 4 3/4in = 125-3176 3/4in = 264-660

8in = 395-9009 1/2in = 528-1162

DrilTech LLC

Positive Pulse MWD and Gamma Ray Probe Based

1 7/8 tool OD, 4 3/4 - 8 collars

23-28 60/30 As applicable to standard NMDC 150 - 175

20 (137 mpa)

50 (NMDC dependent)

100 (NMDC dependent) 150 (NMDC dependent) N/A (3 1/2) 50-130, (4 3/4) 130-275, (6 3/4) 235-600,

(8) 400-800

GE Oil & Gas

Pilot Gamma 3 1/2, 4 3/4, 6 1/2, 8, 9 1/2

Shortest probe length with MWD 20.84

As Per Pilot MWD As Per Pilot MWD 150 20 As Per Pilot MWD As Per Pilot MWD As Per Pilot MWD As Per Pilot MWD As Per Pilot MWD

Scinturion Gamma 3 1/2, 4 3/4, 6 1/2, 8, 9 1/2

Shortest probe length with MWD 30.4

As per Tensor MWD As per Tensor MWD 175 20 As per Tensor MWD

As per Tensor MWD As per Tensor MWD As per Tensor MWD As per Tensor MWD


Dual Gamma Ray (DGR) 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 7.5, (6 3/4, 8) 4.5, (9 1/2) 4.4

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.66x2.25, (6 3/4) 6.54x2.81, (8) 7.76x2.81, (9 1/2) 9.35x2.81

150 18 std. 25 opt.

(4 3/4) 68, (6 3/4, 8) 2, (9 1/2) 1

(4 3/4) 184, (6 3/4, 8) 7, (9 1/2) 3

(6 3/4, 8) 43, (9 1/2) 16

Gamma Ray Probe Depends on hang-off collar OD

Depends on hang-off collar Depends on hang-off collar Depends on hang-off collar 150 std. 175 opt.

20 std. 30 opt.

Depends on hang-off collar ID



(3 3/8, 3 1/2) 90-200, (4 3/4) 150-350, (6 1/2 - 9 1/2) 225-650, (7 1/4 - 9

1/2) 400-1,500

Azimuthal Gamma Ray (AGR) 6 3/4, 8, 9 1/2 (6 3/4) 23.6, (8) 25.3, (9 1/2) 25.4 (part of EWR-M5 tool)

(6 3/4) 21/10, (8, 9 1/2) 14/8 (6 3/4) 6.60 x 2.81, (8) 7.65 x 2.81, (9 1/2) 9.23 x 3.00

150 25 N/A (6 3/4) 12, (8, 9 1/2) 5 (6 3/4) 35, (8, 9 1/2) 13 (6 3/4) 200, (8, 9 1/2) 75

Geo-Pilot Gamma Ray (ABG) 6 3/4, 9 5/8 (6 3/4) 20, (9 5/8) 22 (part of GeoPilot RST)

(6 3/4) 21/10, (9 5/8) 14/8 Depends on rotary steerable tool mode 150 std., 175

opt.

20 std. 30 opt.

(6 3/4) 38, (9 5/8) 6 (6 3/4) 105(9 5/8) 17 (9 5/8) 96

Gamma Ray/At-Bit Inclination (GABI)

4.75 Part of Mud Motor 30/14 Depends on mud motor 150 20 Depends on mud motor

Depends on mud motor 100-265

MWD Services Inc.

MWD Shuttle Sub dia: 3 1/8 - 9 1/2, tool dia: 1 7/8

29.1 w/single battery, 35.5 w/dual battery

60/30 As applicable to standard NMDC 150 20 40 80 150 75-1,000

Navigate Energy Services

Directional Gamma 4 3/4, 6 1/2 & 8 available QI ‘10

(4 3/4) 10, ( 6 1/2 & 8) 10 (5 3/4) 32/16, (6 3/4) TBD, (8) TBD

As applicable to standard NMDC 150 20 N/A 60 125 N/A 225-1000


HDS-1L Directional Gamma

4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

30 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.95x2.81,

(9 1/2) 9.5x3

150 20 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45,( 8 HF,

9 1/2) N/A

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

HDS-1S Directional Gamma

4 3/4, 6 3/4, 8 LF, 8 HF, 9 1/2

16 (4 3/4) 31/17, (6 3/4) 17/9, (8 LF) 18/9, (8 HF) 18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.95x2.81, (9 1/2) 9.5x3

150 20 (4 3/4) 40, (6 3/4, 8 LF, 8 HF, 9

1/2) N/A

(4 3/4) 50, (6 3/4, 8 LF) 45,( 8 HF, 9 1/2) N/A

(4 3/4) N/A, (6 3/4) 50, (8 LF) 50, (8 HF) 45,

(9 1/2) 45

(4 3/4, 6 3/4, 8 LF) N/A, (8 HF) 200, (9 1/2) 200

(4 3/4) 125-375, (6 3/4) 250-750, (8 LF) 250-950, (8 HF) 375-1,125 (9 1/2) 500-1,500

HDS-1R Directional Gamma

3 1/8 - 9 1/2 30 60/30 Dependant on drill collar As applicable to standard NMDC 150 20 250 250 250 250 (2 1/4) 60-180, (2 1/2) 80-280, (2 11/16) 100-350, (2 13/16) 150-550, (3 1/4) 300-1,000

Survivor HDS-1L Directional Gamma

4 3/4, 6 3/8, 6 3/4, 8 LF, 8 HF, 9 1/2

30 (4 3/4) 31/17, (6 3/8) 24/11.5, (6 3/4) 17/9, (8 LF) 18/9, (8 HF)

18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/8) 6.47x2.81, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.95x2.81,

(9 1/2) 9.5x3

175 25 (4 3/4) 40, (6 3/8) 40, (6 3/4, 8 LF, 8

HF, 9 1/2) N/A

(4 3/4) 50, (6 3/8) 50, (6 3/4, 8 LF) 45,( 8 HF,

9 1/2) N/A

(4 3/4, 6 3/8) N/A, (6 3/4) 50, (8 LF) 50, (8

HF) 45, (9 1/2) 45

(4 3/4, 6 3/8, 6 3/4, 8 LF) N/A, (8 HF) 200, (9

1/2) 200

(4 3/4, 6 3/8) 125-375, (6 3/4) 250-750, (8 LF) 250-950,

(8 HF) 375-1,125 (9 1/2) 500-1,500

Survivor HDS-1S Directional Gamma

4 3/4, 6 3/4, 8 LF, 8 HF, 9 1/2

16 (4 3/4) 31/17, (6 3/4) 17/9, (8 LF) 18/9, (8 HF) 18/9, (9 1/2) 15/8

(4 3/4) 4.69x2.25, (6 3/4) 6.74x2.81, (8 LF) 7.98x2.81, (8 HF) 7.95x2.81, (9 1/2) 9.5x3

175 25 (4 3/4) 40, (6 3/4, 8 LF, 8 HF, 9

1/2) N/A

(4 3/4) 50, (6 3/4, 8 LF) 45,( 8 HF, 9 1/2) N/A

(4 3/4) N/A, (6 3/4) 50, (8 LF) 50, (8 HF) 45,

(9 1/2) 45

(4 3/4, 6 3/4, 8 LF) N/A, (8 HF) 200, (9 1/2) 200

(4 3/4) 125-375, (6 3/4) 250-750, (8 LF) 250-950, (8 HF) 375-1,125 (9 1/2) 500-1,500

Survivor HDS-1R Directional Gamma

3 1/8 - 9 1/2 30 60/30 Dependant on drill collar As applicable to standard NMDC 175 25 250 250 250 250 (2 1/4) 60-180, (2 1/2) 80-280, (2 11/16) 100-350, (2 13/16) 150-550, (3 1/4) 300-1,000


1208off_73 73 8/2/12 2:14 PM


Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min





upper, 3.66 lower

(4 3/4) 31/17, (6 3/4) 16/10, (8) 16/10

(4 3/4) 4.43x2.25, (6 3/4) 5.99x2.81, (8) 6.99x2.81

175 (4 3/4), (6 3/4) 25, (8) 20

N/A (4 3/4) 70, (6 3/4) 20 (4 3/4) N/A, (6 3/4) 35, (8) 20

N/A (4 3/4) 125-375, (6 3/4) 250-750, (8) 250-1125

Compensated Wave Resistivity 6 3/4, 8, 9 1/2 25 (6 3/4) 14/5, (8) 12/4, (9 1/2) 8/2 (6 3/4) 5.94 x2.81, (8) 6.9x2.81, (9 1/2) 8.49x3 150 20 N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 80, (8) 80, (9 1/2) 80

(6 3/4) n/a, (8) n/a, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125, (9 1/2) 250-1,250



4.75 20 30/15 4.72x2.25 175 25 6 29 N/A N/A 120-375


N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125,

(9 1/2) 250-1,500


N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125,

(9 1/2) 250-1,500


Ryan Gamma Ray w/ Electromagnetic

4 3/4, 6.5, 6 3/4 34 (4 3/4) 75° / 20° (6 3/4) 28°/11°

(4 3/4) 4.75x2.81 (6 3/4) 6.71x3.25 175C 20K PSI (137 mpa)

8 47 153 450 (4 3/4) 100-350 (6 3/4) 150-800

Ryan Gamma Ray w/ Mud Pulse

3 1/8, 4 3/4, 6.5, 6 3/4, 8, 9.5

20-30 (3 1/8) 100°/ 50° (4 3/4) 40° / 15° (6 3/4) 28°/11°

(8) 15°/9° (9.5) 8°/ 5°

(3 1/8) 2.96x2.25 (4 3/4) 4.75x2.81 (6 3/4) 6.71x3.25 (8) 7.93x4.00 (9.5) 9.42x4.00

175C 20K PSI (137 mpa)

8 47 153 450 (3 1/8) 50-175 (4 3/4) 100-350 (6 3/4) 150-800

(8) 400-925 (9 1/2) 400-1200

Schlumberger

PowerDrive X5 4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4 ) 14.95, (6 3/4 ) 13.48, (8 1/4 , 9 ) 14.6, (11 ) 15.1

Capability (°/100 ft) : (4 3/4 , 6 3/4 , 8 1/4 ) 8, (9 ) 5, (11 ) 4

Pass Through (°/100 ft) : (4 3/4) 30/15, (6 3/4 , 8.25 , 9 ) 20/10,

(11 ) 15/8

150 20 std,

30 opt. (4 3/4, 6 3/4)


across bit)


across bit)


across bit)

130-1,900


4 3/4 , 6 3/4 , 8 1/4, 9 , 11

(4 3/4) 14.95, (6 3/4 ) 13.48, (8 1/4 , 9 ) 14.6, (11 ) 15.1

Capability (°/100 ft) : (4 3/4 , 6 3/4) 8, (8 1/4 ) 6, (9 ) 5, (11 ) 3Pass Through (°/100 ft): (4 3/4 ) 30/15, (6 3/4 , 8.25 , 9 ) 20/10,

(11 ) 15/8

150 std., 175

opt.

20 36(650 - 750 psi required across bit)


across bit)


across bit)


across bit)

100-2,000

PowerDrive ArcherRotary Steerable Tool

6 3/4 (6 3/4 ) 16.64 Capability (°/100 ft) : (6 3/4) 15 Pass Through (°/100 ft): (6 3/4) , >15 Based on fatigue

management

150 20 N/A N/A 30(600 - 750 psi required

across bit)

N/A 250-650

ShortPulse 4.75 27.3 30/15 4.75x2.25x34.8 -OR-

4.59x2.25x30.3

150 std., 175

opt.

20 20 515 - medium flow (varies with modulator

gap)

N/A N/A 130-360

ImPulse 4.75 32 30/15 4.75x2.25x38.5 150 std., 175

opt.

20 std., 27.5 opt.

20 515 - medium flow (varies with modulator

gap)

N/A N/A 130-360 (20 kpsi tool)130-310 (25 kpsi tool)

PowerPulse 6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56(8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)


(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

TeleScope 6 3/4, 8 1/4, 9, 9 1/2 24.7 (6 3/4) 16/8(8 1/4) 12/7

(9, 9 1/2) 10/6

(6 3/4) 6.75x2.81x31.5(8 1/4) 8x2.81x26.2(9 1/4) 9.25x3x28

(9 1/2) 9.5x3.5x26.2

150 std., 175

opt.

25 std., 30 opt.

N/A (6 3/4) 56 (8 1/4) 32 (varies with

modulator gap)

(6 3/4) 151(8 1/4, 9 1/2) 84 (varies

with modulator gap)


(6 3/4) 250-800(8 1/4) 300-1,200

(8 1/4) opt. 800-1,400(9 1/2) 400-2,000

(9 1/2) opt. 400-1,600

SlimPulse 1 3/4 tool OD3 1/8 to 9 1/2 collars


(4 3/4 and smaller) 145/40(6 3/4) 28/10(8 1/4) 20/8(9 1/2) 19/7

(4 3/4) 4.75x2.81x33(6 3/4) 6.75x2.81x32

150 std., 175

opt.

22 (4 3/4) 68, (6 3/4) 16

(6 3/4) 100, (8 3/4) 18 (6 3/4) 324, (8 3/4, 9 3/4) 58

(8 3/4, 9 3/4) 411 Multiple configurations: 35-1200

geoVISION675 6 3/4 10.12 16/8 6.5x2.81x10 150 18 0.9 5.5 18 N/A 0-800

geoVISION825 8 1/4 12.72 13/7 8x2.81x13.5 150 15 0.15 0.95 3 21.8 0-1,200

arcVISION312 3.125 23.5 100/30 3x1.75x33 150 20 112 N/A N/A N/A 0-160

arcVISION475 4.75 21 30/15 4.75x2.81x22 150 25 3 30 N/A N/A 0-400

arcVISION675 6 3/4 18 16/8 6.5x2.81x19 150 std.175 opt.

20 std., 25 and 30

opt.

1 9 20 N/A 0-800

arcVISION825 8 1/4 18 14/7 8.25x2.81x19.8 150 std.175 opt.

25 std., 30 opt.

0.12 1.5 2.5 17.8 0-1,950

arcVISION900 9 18 12/6 9x3x20.7 150 25 0.12 1.5 2.5 17.8 0-1,950

EcoScope 6 3/4 with 7 7/8, 8 3/8, or 9 3/8 Stabilizer

Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

NeoScope 6 3/4 with 8 3/8 stabilizer

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

MicroScope 4 3/4 with 5 3/8 slick sleeve

18 30/15 4.75x2.25x18 150 20 9.8 61 198 N/A 0-500

PeriScope 4 3/4, 6 3/4 18.3 (6 3/4), 23.5 (4 3/4) (4 3/4) 30/15, (6 1/2) 16/8 4.75x2.25x27 (4 3/4), 6.5x2.81x19.3 (6 3/4) 150 25 (4 3/4) 10, (6 3/4) 0.7

(4 3/4) 65,(6 3/4) 4

(6 3/4) 14 N/A 0-400 (4 3/4), 0-800 (6 3/4)

Sharewell Energy Services

Gamma Ray Electro-Trac EM MWD with Gamma

4 3/4 6 1/2 6 3/47 3/4

28.0’ collar limited Collar-defined 150 20 25 100 100 100 50-1200

1208off_74 74 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


Weatherford

EMpulse (Electromagnetic) All Sizes 31 (3 1/6) 116/38, (4 3/4) 25/16, (6 1/4) 20/14, (6 3/4) 18/13, (8)

15/10, (9 1/2) 14/7.5

(4 3/4) 4.53 x 2.25, (6 1/4) 6.09 x 2.25), (6 3/4) 6.59 x 2.81, (8) 7.78 x 2.81

150 15 (4 3/4) 50 (4 3/4) 80-350; (6 3/4, 8) 80-800; (8 1/4, 9 1/2)

80-1,800

HyperPulse All sizes 31 (3 1/6) 116/38, (4 3/4) 25/16, (6 1/4) 20/14, (6 3/4) 18/13, (8)

15/10, (9 1/2) 14/7.5

(4 3/4) 4.75x2.69, (6 1/4) 6.25x3.25, (6 3/4) 6.75x3.25

150 15

HAGR (High-temperature Azimuthal GR)

4 3/4, 6 3/4, 8, 8 1/4, 9 1/2

(4 3/4) 12.5 (6 3/4, 8, 8 1/4, 9 1/2) 12.3

(4-3/4) 30/15, (6-3/4), 16/8, (8, 8-1/4) 14/7, (9-1/2) 12/6

(4 3/4) 4.75x3.22(6 3/4) 6.75x4.24 (8, 8 1/4) 8x4.28 (9 1/2) 9.5x5.16

150 std.180 opt.

(4.75, 6.75, 8, 8.25,

9.5) 20 std. 30 opt.,

(4 3/4) 12, (6 3/4, 8) 2, (8 1/4,

9-1/2) 1

(4 3/4) 64, (6 3/4, 8) 9, (8 1/4, 9-1/2) 2

(4 3/4) 193, (6 3/4, 8) 26, (8 1/4, 9 1/2) 2

(6 3/4, 8) 170, (8-1/4, 9-1/2) 33

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

SAGR (Spectral Azimuthal GR) 4 3/4, 6 3/4 (4-3/4)13.08, (6 3/4) 12.83 (4 3/4) 30/15, (6 3/4) 16/8 (4-3/4) 4.75x3.125(6-3/4) 6.75x4.44 150 Std. 165 opt.

20 4-3/4: 19 6-3/4: 8

4-3/4: 19 6-3/4: 2

4-3/4: 19 6-3/4: 2

4-3/4: 19 6-3/4: 2

(4 3/4) 80-350; (6 3/4) 80-700;

At-Bit Measurement System 4 3/4, 6 3/4 NOM TOOL SIZE (5.60” and

7.325” max)

(4 3/4) 2.83 ft., (6 3/4) 3.01 ft.

(4 3/4) 30/15 (6 3/4) 16/8

(4 3/4, 6 3/4) 150

(4 3/4) 10 (6 3/4) 10

estimates (4 3/4) 12, (6 3/4) 2

estimates (4 3/4) 64, (6 3/4) 9

estimates (4 3/4) exceeds flow rate, (6

3/4) 26

estimates (6 3/4) 170 (4 3/4) 80-350; (6 3/4, 8) 80-800; (8 1/4, 9 1/2)

80-1,800

Resistivity


APS SureShot Gamma + WPR 3.5

3 1/2 59 (2 pcs.)* Collar-limited Collar-defined 150 and 175




1,200 max.






1,200 max.






1,200 max.


8 59 (2 pcs.)* Collar-limited Collar-defined 150 and 175




1,200 max.

Baker Hughes

AutoTrak G3 and AutoTrak X-treme

(Rotary Steerable System, including OnTrak MWD or

AziTrak Integrated MWD/LWD, +/- hard-wired precontoured


4 3/46 3/4

8 1/4 (ATK G3 only)9 1/2

ATK G3 4 3/4in = 50.86 3/4in = 49.98 1/4in = 56.9

9 1/2in = 58.1 ATK X-treme 4 3/4in = 72.66 3/4in = 709 1/2in = 82

ATK G3 4 3/4in = 30/106 3/4in = 20/138 1/4in = 9/6.5

9 1/2in = 13/6.5 ATK X-treme 4 3/4in = 25/106 3/4in = 16/79 1/2in = 8/3.8


Optional. 175 for 6.3/4in, 8.1/4in, 9.1/2in

Standard. 20

Optional 25 & 30

(a) (a) (a) (a) 4 3/4in = 125-3506 3/4in = 200-900 8 1/4in

= 300-1290 9 1/2in = 300-1,600

USMPR (CoilTrak system and Advanced SLIM MWD

system)

2 3/8, 3 1/8 (2 3/8) 9.6, (3 1/8) 17 (z) N/A 150 20 (a) (a) (a) (a) System dependent

OnTrak (integrated directional, gamma ray and formation

resistivity at mutiple depths of investigation)

4 3/4, 6 3/4, 8 1/4, 9 1/2

(4 3/4) 20.2, (6 3/4) 17.0, (8 1/4) 19.0, (9 1/2) 18.1

(4 3/4) 33/12, (6 3/4) 25/15, (8 1/4) TBD, (9 1/2) 10/7

NA Standard. 150,

Optional. 175

Standard 20 (4-3/4,

6-3/4 & 8-1/4, 9-1/2)

Optional. 25, (4-3/4,

6-3/4 & 8-1/4)

Optional. 30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 200-900, (8 1/4) 300-1295, (9 1/2)

300-1,600



4 3/4, 6 3/4, 8 1/4 (4 3/4) 40.4, (6 3/4) 35.3 (4 3/4) 33/12, (6 3/4) 25/15, (8 1/4) TBD, (9 1/2) 10/7

NA Standard. 150,

Optional. 175

Standard 20 (4-3/4,

6-3/4) Optional.

25, (4-3/4, 6-3/4)

Optional. 30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 200-900

StarTrak (high resolution borehole imaging)

4 3/4, 6 3/4 (4 3/4) 9.8, (6 3/4) 8.3 (z) (4 3/4) 5.25 x 3.13, (6 3/4) 7.25 x 4.6

150 Standard 20, Optional

25

(a) (a) (a) (a) (4 3/4) 125-350, (6 3/4) 265-900, function of

MWD platform

ZoneTrak (at-bit boundary detection system)

6 3/4, 9 1/2 (6 3/4) 6.3, (9 1/2) 5.7 (z) (6 3/4) 7.25 x 3.64, (9 1/2) 9.63 x 3.7 150 Standard 20, Optional

25

(a) (a) (a) (a) (6 3/4) 200-900 (9 1/2) 300-1,600

function of MWD platform

GE Oil & Gas

Centerfire Propagation Resistivity Tool

4 3/4, 6.91, 8 1/4 (4 3/4, 6.91) 14.5

(8 1/4) 15.17

(4 3/4) 25/12 (6.91) 17/8

(8 1/4) 14/7

(4 3/4) 5.0x2.81, (6 3/4) 6.58x2.81, (8 1/4) 8.25x2.81

175 20 As per Tensor MWD

As per Tensor MWD As per Tensor MWD As per Tensor MWD (4 3/4)100-350(6.91)

300-750 (8 1/4)

450-1200


EWR-PHASE 4 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 12.5, (6 3/4) 12.1, (8, 9 1/2) 12.2

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.66x2.25, (6 3/4) 6.54x2.81, (8) 7.76x2.81, (9 1/2) 9.35x3

150 std. 175 opt.

18 or 25 (4 3/4) 90, (6 3/4, 8) 7, (9 1/2) 2

(4 3/4) 250, (6 3/4, 8) 19, (9 1/2) 7

(6 3/4) 114, (8) 115, (9 1/2) 40

EWR-PHASE 4D 9.5 12.2 14/8 9.35x3 150 18 2 7 40

SuperSlim EWR-PHASE 4 3.125 11.3 30/14 2.63x1.25 150 16 213 at 150 gal/min

SuperSlim EWR-PHASE 4 3.625 12.9 30/14 TBD 150 20 TBD

EWR-M5 6 3/4, 8, 9 1/2 (6 3/4) 23.6, (8) 25.3, (9 1/2) 25.4

(6 3/4) 21/10, (8, 9 1/2) 14/8 (6.75) 6.60 x 2.81, (8) 7.65 x 2.81, (9 1/2) 9.23 x 3.00

150 25 N/A (6 3/4) 12, (8, 9 1/2) 5 (6 3/4) 35, (8, 9 1/2) 13 (6 3/4) 200, (8, 9 1/2) 75

Azimuthal Focused Resistivity (AFR)

4 3/4, 6 3/4, 8 (4 3/4) 10.0, (6 3/4) 10.8, (8) 8.5

(4 3/4) 30/14, (6 3/4) 21/10, (8) 14/8

(4 3/4) 4.74x2.25, (6 3/4) 6.56x2.81, (8) TBD 150 (4 3/4) 24.5, (6

3/4) 22, (8) 24.5

(4 3/4) 78, ( 6 3/4) 6, (8) 2

(4 3/4) 214, (6 3/4) 17, (8) 5

(6 3/4) 101, (8) 25

Azimuthal Deep Resistivity (ADR)

4 3/4, 6 3/4 (4 3/4) 25.5, (6 3/4) 24.3 (4 3/4) 30/14, (6 3/4) 21/10 (4 3/4) 4.76x2.25, (6 3/4) 6.71x2.81 150 25 (4 3/4) 152, (6 3/4) 14 (4 3/4) 419, (6 3/4) 38 (6 3/4) 229


1208off_75 75 8/2/12 2:14 PM


Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min



Compensated Wave Resistivity 6 3/4, 8, 9 1/2 25 (6 3/4) 14/5, (8) 12/4, (9 1/2) 8/2 (6 3/4) 5.94 x2.81, (8) 6.9x2.81, (9 1/2) 8.49x3 150 20 N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 80, (8) 80, (9 1/2) 80

(6 3/4) n/a, (8) n/a, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125, (9 1/2) 250-1,250

Slim Compensated Wave Resistivity

4.75 29.8 34/17 4.36 x2.25 150 20 8 40 N/A N/A 120-275



4.75 20 30/15 4.72x2.25 175 25 6 29 N/A N/A 120-375


N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125, (9 1/2) 250-1,500


N/A (6 3/4) 30, (8) 30, (9 1/2) 30

(6 3/4) 75, (8) 75, (9 1/2) 75

(6 3/4) N/A, (8) N/A, (9 1/2) 300

(6 3/4) 250-750, (8) 250-1,125, (9 1/2) 250-1,500


Ryan Propagation Resistivity 4 3/4 6 3/4

14.5 (4 3/4) 25/12.2 (6.91) 17.8

(4 3/4) 5.0x2.81, (6 3/4) 6.58x2.81

175C 20K PSI (137 mpa)

8 47 153 450 (4 3/4) 100-350 (6.91) 300-750

Schlumberger

mcrVISION 4 3/4, 6 3/4, 8 1/4 19.4 (4 3/4), 22.8 (6 3/4), 21.2 (8 1/4)

(4 3/4) 30/15(6 3/4) 15/8(8 1/4) 14/7

22 (4 3/4), 25.8 (6 3/4), 21 (8 1/4) 150 20 (4 3/4) 12, (6 3/4) 1, (8 1/4) 1

(4 3/4) 79, (6 3/4) 8, (8 1/4) 8

(4 3/4) 250, (6 3/4) 25, (8 1/4) 25

N/A (4 3/4) 0-400(6 3/4) 0-800(8 1/4) 0-800

ImPulse 4.75 32 30/15 4.75x2.25x38.5 150 std., 175

opt.

20 std., 27.5 opt.

N/A 125 N/A N/A 0-400

geoVISION675 6.75 10.12 16/8 6.5x2.81x10 150 18 0.9 5.5 18 N/A 0-800

geoVISION825 8 1/4 12.72 13/7 8x2.81x13.5 150 15 0.15 0.95 3 21.8 0-1,200


arcVISION475 4.75 21 30/15 4.75x2.81x22 150 25 3 30 N/A N/A 0-400

arcVISION675 6.75 18 16/8 6.5x2.81x19 150 std.175 opt.

20 std., 25 and 30

opt.

1 9 20 N/A 0-800

arcVISION825 8.25 18 14/7 8.25x2.81x19.8 150 std.175 opt.

25 std, 30 opt.

0.12 1.5 2.5 17.8 0-1,950

arcVISION900 9 18 12/6 9x3x20.7 150 25 0.12 1.5 2.5 17.8 0-1,950

PeriScope 4 3/4, 6 3/4 18.3 (6 3/4), 23.5 (4 3/4) 30/15 (4 3/4) , 16/8 (6 3/4) 4.75x2.25x27 (4 3/4), 6.5x2.81x19.3 (6 3/4) 150 25 (4 3/4) 10, (6 3/4) 0.7

(4 3/4) 65,(6 3/4) 4

(6 3/4) 14 N/A 0-400 (4 3/4), 0-800 (6 3/4)


Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800


25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

MicroScope 4 3/4 with 5 3/8 slick sleeve

18 30/15 4.75x2.25x18 150 20 9.8 61 198 N/A 0-500

Weatherford

Multi-Frequency Resistivity (MFR)

4 3/4, 6 3/4, 8, 8 1/4, 9 1/2

(4 3/4) 28.0, (6-3/4) 28.1’, (8-1/4, 9-1/2) 28.3

(4-3/4) 30/15, (6-3/4), 16/8, (8, 8-1/4) 14/7, (9-1/2) 12/6

(4 3/4) 4.75x2.29; (6 3/4) 6.75x3.06; (8 1/4) 8.25x5.28, (9 1/2) 9.5x6.08

150 Std.

180 opt.

(4.75, 6.75”) 20 std. 30

opt.(8.25, 9.5) 20 std, 25

opt.

4 3/4 - 19 6 3/4, 8 - 2

8 1/4, 9 1/2 - 2

4 3/4 - 1056 3/4, 8 - 11

8 1/4, 9 1/2 - 2

4 3/4 - 320 6 3/4,8 - 328 1/4, 9 - 6

6 3/4, 8 - 2088 1/4 , 9 1/2- 45 psi

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

Multi-Frequency Resistivity (MFR) - High Temperature

4 3/4, 6 3/4, 8, 8 1/4 (4 3/4, 6 3/4, 8, 8 1/4) 29.5 (4-3/4) 30/15, (6-3/4), 16/8, (8, 8-1/4) 14/7, (9-1/2) 12/6

(4 3/4) 4.75x2.29; (6 3/4) 6.75x3.06; (8, 8 1/4) 8x4.20

150 std.180 opt.

(4.75, 6.75) 20 std. 30

opt.(8.25, 9.5) 20 std, 25

opt.

4 3/4 - 19 6 3/4 - 2

8, 8 1/4 - 2

4 3/4 - 1056 3/4 - 11

8, 8 1/4 - 11

4 3/4 - 320 6 3/4, 8 - 32

8 1/4 - 32

6 3/4, 8 - 208 8 1/4 - 45 psi

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

Multi-Frequency Resistivity-PLUS(MFR-PLUS)

38080 34.7 30/15 4.75x2.29 150 20 Std.,30 opt.

19 105 320 n/a 80-350

GWAR (GuideWave Azimuthal Multi-Frequency Resistivity)

4.75, 6.75 34.7 30/15 4.75x2.29 150 20 Std.,30 opt.

19 105 320 n/a 80-350

Porosity

Baker Hughes

LithoTrak 4 3/4, 6 3/4, 8 1/4 (4 3/4) 16.1, (6 3/4) 17.6, (8 1/4) 18.2

(z) (4 3/4) 4.82x1.87, (6 3/4) 6.87x2, (8 1/4) 8.25x2.813

150 Standard 20 (4 3/4) Optional. 25, (6 3/4 & 8.1/4) Optional.

30

(a) (a) (a) (a) (4 3/4) 100-320, (6 3/4) 200-900, (8 1/4) 300-1,300


SoundTrak 6 3/4, 8 1/4, 9 1/2 (6 3/4 - 9 1/2) 32.8 (z) (6 3/4) 7.1x5.5, (8 1/4) 8.4x6.3, (9 1/2) 9.7x7.6 150 Standard 25 Optional.

30

(a) (a) (a) (a) (6 3/4) 200- 900(8 1/4) 300-1,300(9 1/2) 450-1,560


MagTrak (Advanced Magnetic Resonance While Drilling)

4 3/4, 6 3/4 (4 3/4) 27.7(6 3/4) 29.9

(z) n/a 150 Standard 20, Optional

25

(a) (a) (a) (a) (4 3/4) 125-406(6 3/4) 264-660


Bi-modal AcousTic (BAT) 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 28, (6 3/4, 8, 9 1/2) 21

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.65x2.25, (6 3/4) 6.43x2.81, (8) 7.65x2.81, (8 HP/HF) 7.53x2.81, (9 1/2) 8.98x3

150, 175 (All) 25, (6 3/4, 8, 9 1/2) 30

opt.

(4 3/4) 161, (6 3/4, 8) 11, (6 3/4 HP) 12, (8 HP/

HF, 9 1/2) 4

(4 3/4) 458, (6 3/4, 8) 33, (6 3/4 HP) 35, (8

HP/HF, 9 1/2) 13

(6 3/4, 8) 198, (6 3/4 HP) 208, (8 HP/HF, 9 1/2) 76

1208off_76 76 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


Quadrupole Acoustic (QBAT) 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 28, (6 3/4, 8, 9 1/2) 21

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.65x2.25, (6 3/4) 6.43x2.81, (8) 7.65x2.81, (8 HP/HF) 7.53x2.81, (9 1/2) 8.98x3

150,175 (All) 25, (6 3/4, 8, 9 1/2) 30

opt.

(4 3/4) 161, (6 3/4, 8) 11, (6 3/4 HP) 12, (8 HP/

HF, 9 1/2) 4

(4 3/4) 458, (6 3/4, 8) 33, (6 3/4 HP) 35, (8

HP/HF, 9 1/2) 13

(6 3/4, 8) 198, (6 3/4 HP) 208, (8 HP/HF, 9 1/2) 76

Azimuthal/Crossed-Dipole Acoustic (XBAT)

4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 28, (6 3/4, 8, 9 1/2) 21

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.65x2.25, (6 3/4) 6.43x2.81, (8) 7.65x2.81, (8 HP/HF) 7.53x2.81, (9 1/2) 8.98x3

150 (All) 25, (6 3/4, 8, 9 1/2) 30

opt.

(4 3/4) 161, (6 3/4, 8) 11, (6 3/4 HP) 12, (8 HP/

HF, 9 1/2) 4

(4 3/4) 458, (6 3/4, 8) 33, (6 3/4 HP) 35, (8

HP/HF, 9 1/2) 13

(6 3/4, 8) 198, (6 3/4 HP) 208, (8 HP/HF, 9 1/2) 76

Compensated Neutron Porosity 6 3/4, 8 7.65 (6 3/4) 21/10, (8) 14/8 (6 3/4) 6.54x2.81, (8) 7.76x2.81 150 18 4 12 72

Compensated Thermal Neutron (CTN)

4 3/4, 6 3/4, 8 (4 3/4) 11.1, (6 3/4) 11.8, (8) 17.5

(4 3/4) 30/14, (6 3/4) 21/10, (8) 14/8

(4 3/4) 4.72x2.25, (6 3/4) 6.62x2.81, (8) 8.04x2.81

150, 175 (4 3/4) 20, 25 (6 3/4, 8) 25, 30

(4 3/4) 72, (6 3/4) 4, (8) 3

(4 3/4) 193, (6 3/4) 12, (8) 11

(8) 63

Magnetic Resonance Imaging Logging While Drilling

(MRIL-WD)

6.75 39 21/10 6.35 x 2.81 150 20 20 58


Compensated Long-Spaced Sonic

4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 31.5, (6 3/4, 8, 9 1/2) 29

(4 3/4) 32/17.5, (6 3/4) 18/9.5, (8) 17/9, (9 1/2) 10/5

(4 3/4) 4.4x2.25, (6 3/4) 6.25x2.81, (8) 7.2x2.81, (9 1/2) 9.2x3.00

150 20 (4 3/4) 36, (6 3/4) n/a, (8) N/A, (9

1/2) N/A

(4 3/4) 80, (6 3/4) 50, (8) 20, (9 1/2) 20

(4 3/4) n/a, (6 3/4) 115 (8) 35, (9 1/2) 35

(9 1/2) 60 (4 3/4) 120-300, (6 3/4) 250-750, (8) 250-1,125, (9 1/2)

250-1,500

E Sonic 6 3/4, 8 (6 3/4, 8) 29 (6 3/4) 18/9.5, (8) 17/9 (6 3/4) 6.25x2.81, (8) 7.2x2.81 150 20 (6 3/4) N/A, (8) N/A

(6 3/4) 25, (8) 15 (6 3/4) 45 (8) 18 N/A (6 3/4) 250-750, (8) 250-1,125

Slim Density/Neutron Stand-off Caliper

4.75 15.6 30/15 4.93x2.25 150 25 6 29 N/A N/A 120-375

Survivor Slim Density/Neutron Stand-off Caliper

4.75 15.6 30/15 4.93x2.25 175 25 6 29 N/A N/A 120-375

Density/Neutron Stand-off Caliper

6 3/4, 8 25 (6 3/4) 16/8, (8) 12/6 (6 3/4) 6.69 x2.81, (8) 9.2x2.81 150 18 n/a (6 3/4) 20, (8) 10 (6 3/4) 45, (8) 25 N/A (6 3/4) 250-750, (8) 275-1,125

iFinder Density Imaging 4 3/4, 6 3/4 19.6, 19.8 (4 3/4) 30/15,(6 3/4) 16/10

(4 3/4) 4.92 x 2.25, (6 3/4) 6.68 x 2.81 175 25 6 29 65 N/A (4 3/4) 120-375, (6 3/4) 250-750

Schlumberger

SonicScope475 4.75 30 30/154.75x2.25x33.7

150 std.175 opt.

25 11.1 69.6 N/A N/A 0-400

sonicVISION675 6.75 23.8 16/8 6.5x2.81x35 150 std.175 opt.

25 std. 30 opt.

0.3 2.0 6.6 N/A 0-800

sonicVISION825 8.25 22.6 14/6 8.0x2.81x32 150 std.175 opt.

25 std. 30 opt.

0.1 0.7 2.3 16.0 0-1,200

sonicVISION900 9 22.6 12/4 9x2.81x27 150 25 0.1 0.7 2.3 16.0 0-1,400

adnVISION475 4 3/4 with Slick, 5 7/8, or 6 1/4 Stabilizer

options

23.6 30/15 4.75x2.25x24.7 150 std., 175

opt.

20 35 220 N/A N/A 0-400


Options

20.5 16/8 6.5x2.25x27.4 150 std.175 opt.

20 std., 30 opt.

1 4 10 N/A 0-800

adnVISION825 8 1/4 with Slick or 10 3/8 Stabilizer

Options

22.3 14/7 8.25x2.81x26.1 150 20 std., 30 opt.

1 2 6 41 0-1,600

adnVISION825s 8 1/4 with 12 stabilizer

31 12/4 8.0x2.81x21.0 150 20 1 7 22 90 0-1,000

proVISION 6 3/4 with Slick, 8 1/4, or 9 3/8 Stabilizer

Options

37.3 16/8 6.5x2.81x36.5 150 18 4 25 81 N/A 300-800


Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800


25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

Weatherford

TNP (Thermal Neutron Porosity)

4-3/4, 6-3/4, 8-1/4 24.5 all sizes (includes AZD) (4 3/4) 30/15, (6 3/4) 16/8,(8.25) 14/7

(4 3/4) 4.75x3.28 (6 3/4) 6.75x4.24 (8.25) 8.25x5.17

150 Std.

180 Opt.

(4-3/4 & 6-3/4) 20 std., 30

opt., (8-1/4) 20 std., 25

opt.

(4 3/4) 16(6 3/4) 2(8 1/4) 2

(4 3/4) 87 (6 3/4) 10 (8 1/4) 2

(4 3/4) 265 (6 3/4) 27 (8 1/4) 11

(6 3/4) 205(8 1/4) 43

(4 3/4) 80-350; (6 3/4, 8) 80-800; (8 1/4, 9 1/2)

80-1,800

SST (ShockWave Sonic Tool) 4-3/4, 6-3/4, 8-1/4, 9-1/2

(4-3/4) 29.7, (6-3/4) 26.0, (8-1/4) 26.5’, (9-1/2) 26.75’

(4-3/4) 20/12, (6-3/4”) 11/5, (8-1/4”) 10/4, ( 9-1/2”) 10/4

(6-3/4) 6.75 x 3.06, (8-1/4) 8.25 X 4.20, (9-1/2) 9.5x8.8

150 Std.

165 Opt.

(4-3/4 & 6-3/4) 20 std., 30

opt., (8-1/4 & 9-1/2)

20 std., 25 opt.

4 3/4 - 19 6 3/4, 8 - 2

8 1/4, 9 1/2 - 2

4 3/4 - 1056 3/4, 8 - 11

8 1/4, 9 1/2 - 2

4 3/4 - 320 6 3/4,8 - 328 1/4, 9 - 6

6 3/4, 8 - 2088 1/4 , 9 1/2- 45 psi

(4 3/4) 80-350; (6 3/4, 8) 80-700; (8 1/4, 9 1/2)

80-1,600

Density

Baker Hughes

LithoTrak 4 3/4, 6 3/4, 8 1/4 (4 3/4) 16.1, (6 3/4) 17.6, (8 1/4) 18.2

(z) (4 3/4) 4.82x1.87, (6 3/4) 6.87x2, (8 1/4) 8.25x2.813

150 Standard 20 (4 3/4) Optional. 25, (6 3/4 & 8.1/4) Optional.

30

(a) (a) (a) (a) (4 3/4) 100-320, (6 3/4) 200-900, (8 1/4) 300-1,290



Azimuthal Lithodensity (ALD) 4 3/4, 6 3/4, 8 (4 3/4) 14.3, (6 3/4) 12.4, (8) 13.6

(4 3/4) 30/14, (6 3/4) 21/10, (8) 14/8

(4 3/4) 4.6x2.25, (6 3/4) 6.54x2.81, (8) 7.76x2.81

150, 175 (4 3/4) 20, 25, (6 3/4, 8) 18, 25

(4 3/4) 86, (6 3/4, 8) 7 (4 3/4) 237, (6 3/4) 19, (8) 21

(6 3/4) 117, (8) 128


1208off_77 77 8/2/12 2:14 PM


Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


Stabilized Lithodensity (SLD) 4 3/4, 6 3/4, 8 (4 3/4) 14.3, (6 3/4) 12.4, (8) 13.6

(4 3/4) 30/14, (6 3/4) 21/10, (8) 14/8

(4 3/4) 4.6x2.25, (6 3/4) 6.54x2.81, (8) 7.76x2.81

140 (4 3/4) 20, (6 3/4,

8) 18

(4 3/4) 86, (6 3/4, 8) 7 (4 3/4) 237, (6 3/4) 19, (8) 21

(6 3/4) 117, (8) 128


Slim Density/Neutron Stand-off Caliper

4.75 15.6 30/15 4.93x2.25 150 25 6 29 N/A N/A 120-375

Survivor Slim Density/Neutron Stand-off Caliper

4.75 15.6 30/15 4.93x2.25 175 25 6 29 N/A N/A 120-375

Density/Neutron Stand-off Caliper

6 3/4, 8 25 (6 3/4) 16/8, (8) 12/6 (6 3/4) 6.69 x2.81, (8) 9.2x2.81 150 18 N/A (6 3/4) 20, (8) 10 (6 3/4) 45, (8) 25 N/A (6 3/4) 250-750, (8) 275-1,125

iFinder Density Imaging 4 3/4, 6 3/4 (4 3/4) 19.6, (6 3/4) 19.8 (4 3/4) 30/15, (6 3/4) 16/10 (4 3/4) 4.92 x 2.25, (6 3/4) 6.68 x 2.81 175 25 6 29 65 N/A (4 3/4) 120-375, (6 3/4) 250-750

Schlumberger


options

23.6 30/15 4.75x2.25x24.7 150 std., 175

opt.

20 35 220 N/A N/A 0-400


Options

20.5 16/8 6.5x2.25x27.4 150 std.175 opt.

20 std., 30 opt.

1 4 10 N/A 0-800


Options

22.3 14/7 8.25x2.81x26.1 150 20 std, 30 opt.

1 2 6 41 0-1,600


31 12/4 8x2.81x21 150 20 1 7 22 90 0-1,000


Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800


25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

Weatherford

AZD (Azimuthal Density Sensor)

4-3/4, 6-3/4, 8-1/4 24.5 all sizes (includes TNP) (4-3/4) 30/15 (6-3/4) 16/8, (8-1/4) 14/7

(4-3/4) 4.75x3.28 (6-3/4) 6.75x4.24 (8-1/4) 8.25x5.17

150 Std.

165 Opt.

(4-3/4 & 6-3/4) 20 std., 30

opt., (8-1/4) 20 std., 25

opt.

(4 3/4) 16 (6 3/4) 2 (8 1/4) 2

(4 3/4) 87 (6 3/4) 10 (8 1/4) 2

(4 3/4) 265 (6 3/4) 27 (8 1/4) 11

(6 3/4) 205(8 1/2) 43

(4 3/4) 80-350; (6 3/4) 80-700; (8 1/4) 80-1,600

Formation Pressure Testing

Baker Hughes

TesTrak 4 3/4, 6 3/4, 8 1/4 (4 3/4) 23.0, (6 3/4) 24.3, (8 1/4) 24.4

(z) N/A 150 Standard 20 (4

3/4, 6 3/4 & 8 1/4) Optional.

30

(a) (a) (a) (a) 125 - 1600, function of MWD platform


GeoTap 4 3/4, 6 3/4, 8, 9 1/2 (4 3/4) 24, (6 3/4) 28.4, (8, 9 1/2) 26.7

(4 3/4) 30/14, (6 3/4) 21/10, (8, 9 1/2) 14/8

(4 3/4) 4.76 x 2.25, (6 3/4) 6.4x2.81, (8) 7.9 x 2.81, (9 1/2) 9.18 x 3

150 4 3/4, 25 (6 3/4,

8, 9 1/2) 25, 30

(4 3/4) 20, (6 3/4) 19, (8, 9 1/2) 15

(4 3/4) 120, (6 3/4) 39, (8, 9 1/2) 31

(6 3/4) 75, (8, 9 1/2) 60 (8, 9 1/2) 350

PathFinder

Drilling Formation Tester 6.75 37 16/7 6.37x2.81 150 20 N/A N/A 70 N/A 275-750

Schlumberger

StethoScope 675 6 3/4 w/ 8 1/4 stab 6 3/4 w/ 9 1/4 stab

(Optional)

31 16/8 31 150 std. 165 opt.

20 std.25 opt.30 opt.

MW x Q2/CMW = mud weight

in ppg Q = Flowrate

in gpmC = 58,620

0-800

StethoScope 825 8 1/4 w/ 12.0 stab8 1/4 w/ 10 3/8 stab

(Optional)

31.5 13/7 35 150 20 std.25 opt.30 opt.


in ppg Q = Flowrate

in gpmC = 79,439

0-1,600

StethoScope 475 4 3/4 w/ 5 3/4 stab 4 3/4 w/ 5 1/2 stab

(Optional)

26 30/15 43.5 150 20 std.25 opt.30 opt.


in ppg Q = Flowrate

in gpmC = 6000

0-400

Weatherford

PFT (PressureWave Formation Tester)

6-3/4, 8-1/4 24.3 (6 3/4) 16/8,(8.25) 14/7

(6 3/4) 6.75x4.24 (8.25) 8.25x5.17 150 20 std. (6.75), 30 opt. (6.75)

(6 3/4) 2 (6 3/4) 10 (6 3/4) 27 (6 3/4) 80-800

Seismic

Schlumberger

seismicVISION675 6.75 14 16/8 13.8 150 25 0.4 2.4 7.8 N/A 800

seismicVISION825 8.25 13.84 14/7 14.4 150 23 std., 27.5 opt.

0.1 0.7 2.2 15.6 2,000

seismicVISION900 9 13.84 12/4 14.8 150 23 0.1 0.7 2.2 15.6 2,000

1208off_78 78 8/2/12 2:14 PM

Servi

ce lin

e (s)

Tool

OD, i

n.

Leng

th, ft

Max. D

LS, °

100 f

t

(slidi

ng, r

otatio

n)

Equiv

alent

bend

ing st

iffnes

s

Max. o

p. te

mpera

ture (

°C)

Max. o

p. pr

ess,

kpsi

Pres

sure

drop

, psi

at

100 g

al/min

Pres

sure

drop

, psi

at

450 g

al/min

Flow

rang

e, ga

l/min

Pres

sure

drop

, psi

at

250 g

al/min

Pres

sure

drop

, psi

at

1,20

0 gal/

min


Well Placement Technology

Baker Hughes

AziTrak (azimuthal formation resistivity at multiple depths of investigation plus real-time 3D

geospatial modelling)

4 3/4, 6 3/4 (4 3/4) 40.4, (6 3/4) 35.3 (z) TBD 150 Standard 20 (4 3/4) Optional.

25, (6 3/4) Optional.

30

(a) (a) (a) (a) 4 3/4) 125-350, (6 3/4) 265-900

ZoneTrak G (near bit gamma ray)

9.5 4.79 (z) TBD 150 Standard 20, Optional

25

(a) (a) (a) (a) 300-1,600, function of MWD platform

ZoneTrak (at-bit boundary detection system)

6 3/4, 9 1/2 (6 3/4) 6.3, (9 1/2) 5.7 (z) (6 3/4) 7.25 x 3.64, (9 1/2) 9.63 x 3.7 150 Standard 20, Optional

25

(a) (a) (a) (a) (6 3/4) 200-900 (9 1/2) 300-1,600


DeepTrak (very deep resistivity) 6.75 Transmitter Sub : 6.9 ftReceiver Sub:

22.4 ft

(z) TBD 150 Standard 20, Optional

25

(a) (a) (a) (a) 200-900, function of MWD platform

StarTrak (high resolution borehole imaging)

4 3/4, 6 3/4 (4 3/4) 9.8, (6 3/4) 8.3 (z) (4 3/4) 5.25 x 3.13, (6 3/4) 7.25 x 4.6


25

(a) (a) (a) (a) (4 3/4) 125-350, (6 3/4) 265-900, function of

MWD platform

SeismicTrak (borehole seismic tool)

6 3/4, 9 1/2 (6 3/4) 10.73, (9 1/2 11.35 (z) (6 3/4) 7 x XX, (9 1/2) 9.5 x XX


25

(a) (a) (a) (a) (6 3/4) 265-900, (9 1/2in) 530-1270


Azimuthal Deep Resistivity (ADR)

4 3/4, 6 3/4 (4 3/4) 25.5, (6 3/4) 24.3 (4 3/4) 30/14, (6 3/4) 21/10 (4 3/4) 4.76x2.25, (6 3/4) 6.71x2.81 150 25 (4 3/4) 152, (6 3/4) 14 (4 3/4) 419, (6 3/4) 38 (6 3/4) 229

Azimuthal Focused Resistivity (AFR)

4 3/4, 6 3/4, 8 (4 3/4) 10.0, (6 3/4) 10.8, (8) 8.5

(4 3/4) 30/14, (6 3/4) 21/10, (8) 14/8

(4 3/4) 4.74x2.25, (6 3/4) 6.56x2.81, (8) TBD 150 (4 3/4) 24.5, (6

3/4) 22, (8) 24.5

(4 3/4) 78, ( 6 3/4) 6, (8) 2

(4 3/4) 214, (6 3/4) 17, (8) 5

(6 3/4) 101, (8) 25

At-Bit Inclination (ABI) 4 3/4, 6 3/4, 8, 9 5/8 Part of Mud Motor (4 3/4) 30/14, (6 3/4) 21/10, (8, 9 5/8) 14/8

Depends on mud motor 150 18 Depends on mud motor

Depends on mud motor Depends on mud motor Depends on mud motor Depends on mud motor





upper, 3.66 lower

(4 3/4) 31/17, (6 3/4) 16/10, (8) 16/10

(4 3/4) 4.43x2.25, (6 3/4) 5.99x2.81, (8) 6.99x2.81

175 (4 3/4), (6 3/4) 25, (8) 20

N/A (4 3/4) 70, (6 3/4) 20 (4 3/4) N/A, (6 3/4) 35, (8) 20

N/A (4 3/4) 125-375, (6 3/4) 250-750, (8) 250-1125

Schlumberger

PeriScope 4 3/4, 6 3/4 23.5 (4 3/4), 18.3 (6 3/4) 30/15 (4 3/4) , 16/8 (6 3/4) 4.75x2.25x27 (4 3/4), 6.5x2.81x19.3 (6 3/4) 150 25 (4 3/4) 10, (6 3/4) 0.7

(4 3/4) 65,(6 3/4) 4

(6 3/4) 14 N/A 0-400 (4 3/4), 0-800 (6 3/4)

geoVISION675 6.75 10.12 16/8 6.5x2.81x10 150 18 0.9 5.5 18 N/A 0-800

geoVISION825 8 1/4 12.72 13/7 8x2.81x13.5 150 15 0.15 0.95 3 21.8 0-1,200


Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800



Options

20.5 16/8 6.5x2.25x27.4 150 std.175 opt.

20 std., 30 opt.

1 4 10 N/A 0-800


Options

22.3 14/7 8.25x2.81x26.1 150 20 std, 30 opt.

1 2 6 41 0-1,600


31 12/4 8x2.81x21 150 20 1 7 22 90 0-1,000


Options

25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800


25.2 16/8 6.5x2.81x24.5 150 std. 175 opt.

20 std., 25 opt.

2 10 32 N/A 250-800

MicroScope 4 3/4 with

5 3/8 slick sleeve

18 30/15 4.75x2.25x18 150 20 9.8 61 198 N/A 0-500

Weatherford

MFR+Plus (Multi-Frequency Resistivity PLUS)

4.75 34.7 30/15 4.75x2.29 150 30 19 105 320 n/a 80-350

GWAR (GuideWave Azimuthal Multi-Frequency Resistivity)

4.75, 6.75 34.7 30/15 4.75x2.29 150 20 Std.,30 opt.

19 105 320 n/a 80-350

At-Bit Measurement System 4 3/4, 6 3/4 NOM TOOL SIZE (5.60” and

7.325” max)

(4 3/4) 2.83 ft., (6 3/4) 3.01 ft.

(4 3/4) 30/15, (6 3/4) 16/8 (4 3/4, 6 3/4) 150

(4 3/4) 10 (6 3/4) 10

estimates (4 3/4) 12, (6 3/4) 2

estimates (4 3/4) 64, (6 3/4) 9

estimates (4 3/4) exceeds flow rate, (6

3/4) 26

estimates (6 3/4) 170 (4 3/4) 80-350; (6 3/4, 8) 80-800; (8 1/4, 9 1/2)

80-1,800

Formation Fluid Identification and Sampling


GeoTap IDS 6 3/4 34.7 + 11.8 per sample collar 21/10 6.89x2.81 (with one sample collar) 150 20 TBD TBD TBD TBD


1208off_79 79 8/2/12 2:14 PM

Date post:	30-Oct-2014
Category:	Documents
Upload:	lokrana
View:	117 times
Download:	2 times

2012 Mwd Survey

Documents

The MWD Act

Measurement While Drilling (MWD) Tools · 6 · Phone +49.51 44.49 36 0 4¾" MWD Tool Measurement While Drilling (MWD) Tools MWD tools are generally used for real-time directional

Em Mwd Flyer

Next Generation Directional MWD Tool Requirements for ...dea-global.org/.../2010/09/...MWD-Tool04272011.PPT.pdf · MWD and LWD systems, and steering tools, electronic multishots and

MWD Overview - ISCWSA · MWD Overview Steve Grindrod . MWD Objective • Get downhole Inclination, Azimuth, Toolface and Data Quality to Directional Driller as quickly as possible.

Digital Radar Motion Detector - MWD BP-B - Rytec …authorized.rytecdoors.com/Files/Files/mwd-bp-b-manual-us-9.pdf · Manual MWD BP-B FEIG ELECTRONIC GmbH Page 3 of 20 MWD BP-B_Manual_US_9.doc

Rrx Mwd - Copy

Mwd evaluations

Softwares Used in MWD

Mwd Sonny Class

Mwd lecture

Magnetic Mwd

Cathedral’s FUSION MWD system makes it simple to incorporate a variety of MWD ... · Cathedral’s FUSION MWD system makes it simple to incorporate a variety of MWD components and

MWD Administrative Code

MWD Gamma Sensor with Environmental Monitoring€¦ · SureShot™ MWD Gamma Sensor with Environmental Monitoring SureShot-Gamma ... mud weight and drill collar effects; ... MWD downhole

Thesis MWD 6397

Measurement While Drilling (MWD)

MWD 2.01 Vocab