Date post: | 18-Jan-2018 |
Category: |
Documents |
Upload: | gwendolyn-franklin |
View: | 221 times |
Download: | 0 times |
©2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.
Chapter 10Chapter 10
Variance Analysis – A Tool for Variance Analysis – A Tool for Cost Control & Performance Cost Control & Performance
EvaluationEvaluation
Introduction• Control decisions include questions of how to
evaluate performance, what measures to use, and what types of incentives to use.
• Managers can use the budget as a control tool by comparing budgeted sales, budgeted production, and budgeted manufacturing costs with actual sales, production, and manufacturing costs.
• These comparisons are typically made through a process called variance analysis.
Standard Cost
A budget for a single unit of a product or a service is known as its standard cost. Just as the cost of a product consists of three components—direct materials, direct labor, and manufacturing overhead —a standard cost will be developed for each component.
Standard Cost ComponentsThere are two separate cost
components for each part of a product cost:
A standard quantity or amount of materials, labor or overhead.
A standard or budgeted price of materials, labor or overhead.
Setting Standards Standards can be determined in a couple of ways.
Ideal Versus Practical Standards
Most managers would agree that practical standards encourage employees to be more positive and productive.
An ideal standard is one that is attained
only when near-perfect conditions are present.
An ideal standard assumes that every aspect of the production process, from
purchasing through shipment, is at peak
efficiency.
A practical standard should be attainable
under normal, efficient operating conditions.
Practical standards take into consideration
that machines break down
occasionally, waste occurs in materials, etc.
Flexible Budgeting with Standard Costs
Flexible Budget Variance
Breaking Down the Variable Manufacturing Cost Variance
The flexible budget variance may show that actual variable manufacturing costs are higher than budgeted, but what is the true cause?
Incurred more labor cost than usual??
Spent more
than budgeted on
electricity or
supplies??
Spent too much
on materials??
The Basic Variance Analysis Model
Price variance = Actual X Actual - Standard quantity (AQ) price (AP) price (SP)[ ]Usage variance = Standard X Actual - Standard price (SP) quantity (AQ) quantity (SQ)[ ]
Interpreting and Using Variance Analysis
Standard costs and variance analysis are useful for diagnosing organizational performance in companies that are stable, mature, and reliant on direct labor.
They are not very helpful in rapidly changing companies.
Information from variance analysis is typically too aggregated for operating managers to use.
Drawbacks of Variance Analysis Summary Reports
Information from variance analysis is usually not timely enough to be useful to managers.Traditional variance analysis of variable and fixed overhead provides little useful information for managers.
Traditional variance analysis focuses on cost control instead of performance measures.
Using and Interpreting VariancesIdentifying management’s objectives is vitally important in deciding how to use
and interpret variances.
Understand management’s primary objective. Is it cost control
or producing a high-quality product is important?
Once managers are sure of the root cause(s) of a variance and have considered their own objectives in utilizing variance analysis, they
can intelligently consider options available to deal with the problem.
Behavioral ConsiderationsDysfunctional behavioral examples include:
The use of ideal standards can
lead to resentment as
managers always face unfavorable
variances.
Too much emphasis on direct material
usage variance causes managers to increase production
while causing inventories to rise
unacceptably.
Purchasing manager
evaluations linked to price variances can
cause purchases of inferior materials.
End of Chapter 10