11
/20
13
p r o j e c t m a n a g e m e n tg u i d e l i n e s
N O V E M B E R 2 0 1 3T e l e c o m m u n i c a t i o n D e v e l o p m e n t S e c t o r
Printed in SwitzerlandGeneva, 2013
International Telecommunication Union
Telecommunication Development Bureau
Place des Nations
CH-1211 Geneva 20
Switzerland
www.itu.int
pr
oje
ct
ma
na
ge
me
nt
gu
ide
lin
es
n
oV
em
Be
r 2
01
3
International Telecommunication Union (ITU) Telecommunication Development Bureau (BDT) Office of the Director Place des Nations CH-1211 Geneva 20 – Switzerland Email: [email protected] Tel.: +41 22 730 5035/5435 Fax: +41 22 730 5484
Deputy to the Director and Director,Administration and Operations Coordination Department (DDR)
Infrastructure EnablingEnvironmnent and e-Applications Department (IEE)
Innovation and PartnershipDepartment (IP)
Project Support and Knowledge Management Department (PKM)
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +41 22 730 5784 Tel.: +41 22 730 5421 Tel.: +41 22 730 5900 Tel.: +41 22 730 5447Fax: +41 22 730 5484 Fax: +41 22 730 5484 Fax: +41 22 730 5484 Fax: +41 22 730 5484 Africa
Ethiopia Cameroon Senegal Zimbabwe International Telecommunication Union (ITU) Regional Office P.O. Box 60 005 Gambia Rd., Leghar ETC Building 3rd floor Addis Ababa – Ethiopia
Union internationale des télécommunications (UIT) Bureau de zone Immeuble CAMPOST, 3e étage Boulevard du 20 mai Boîte postale 11017 Yaoundé – Cameroon
Union internationale des télécommunications (UIT)Bureau de zone 19, Rue Parchappe x Amadou Assane Ndoye Immeuble Fayçal, 4e étage B.P. 50202 Dakar RP Dakar – Senegal
International TelecommunicationUnion (ITU) Area Office TelOne Centre for Learning Corner Samora Machel and Hampton Road P.O. Box BE 792 Belvedere Harare – Zimbabwe
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected] Tel.: +251 11 551 4977 Tel.: + 237 22 22 9292 Tel.: +221 33 849 7720 Tel.: +263 4 77 5939Tel.: +251 11 551 4855 Tel.: + 237 22 22 9291 Fax: +221 33 822 8013 Tel.: +263 4 77 5941Tel.: +251 11 551 8328 Fax: + 237 22 22 9297 Fax: +263 4 77 1257Fax: +251 11 551 7299 Americas
Brazil Barbados Chile Honduras União Internacional de Telecomunicações (UIT) Regional Office SAUS Quadra 06, Bloco “E” 11º andar, Ala Sul Ed. Luis Eduardo Magalhães (Anatel) 70070-940 Brasilia, DF – Brazil
International TelecommunicationUnion (ITU) Area Office United Nations House Marine Gardens Hastings, Christ Church P.O. Box 1047 Bridgetown – Barbados
Unión Internacional deTelecomunicaciones (UIT) Oficina de Representación de Área Merced 753, Piso 4 Casilla 50484, Plaza de Armas Santiago de Chile – Chile
Unión Internacional deTelecomunicaciones (UIT) Oficina de Representación de Área Colonia Palmira, Avenida Brasil Ed. COMTELCA/UIT, 4.º piso P.O. Box 976 Tegucigalpa – Honduras
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +55 61 2312 2730-1 Tel.: +1 246 431 0343/4 Tel.: +56 2 632 6134/6147 Tel.: +504 22 201 074Tel.: +55 61 2312 2733-5 Fax: +1 246 437 7403 Fax: +56 2 632 6154 Fax: +504 22 201 075Fax: +55 61 2312 2738 Arab States Asia and the Pacific CIS countries Egypt Thailand Indonesia Russian FederationInternational Telecommunication Union (ITU) Regional Office Smart Village, Building B 147, 3rd floor Km 28 Cairo – Alexandria Desert Road Giza Governorate Cairo – Egypt
International TelecommunicationUnion (ITU) Regional Office Thailand Post Training Center, 5th floor, 111 Chaengwattana Road, Laksi Bangkok 10210 – Thailand
Mailing addressP.O. Box 178, Laksi Post Office Laksi, Bangkok 10210 – Thailand
International TelecommunicationUnion (ITU) Area Office Sapta Pesona Building, 13th floor JI. Merdan Merdeka Barat No. 17 Jakarta 10001 – Indonesia
Mailing address: c/o UNDP – P.O. Box 2338 Jakarta 10001 – Indonesia
International Telecommunication Union (ITU) Area Office 4, Building 1 Sergiy Radonezhsky Str. Moscow 105120 Russian Federation
Mailing address: P.O. Box 25 – Moscow 105120 Russian Federation
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +202 3537 1777 Tel.: +66 2 575 0055 Tel.: +62 21 381 3572 Tel.: +7 495 926 6070Fax: +202 3537 1888 Fax: +66 2 575 3507 Tel.: +62 21 380 2322 Fax: +7 495 926 6073 Tel.: +62 21 380 2324 Fax: +62 21 389 05521
EuropeSwitzerland International Telecommunication Union (ITU) Telecommunication Development Bureau (BDT)Europe Unit (EUR) Place des Nations CH-1211 Geneva 20 – Switzerland Switzerland
Email: [email protected] Tel.: +41 22 730 5111
Please consider the environment before printing this report.
ITU 2013
All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU.
Project management guidelines - November 2013
iii
Foreword It is my pleasure to present the 2013 version of the BDT project management guidelines that supersedes the April 2008 publication.
These Guidelines are drawn up in accordance with the World Telecommunication Development Conference Resolution 17 (Rev. Hyderabad, 2010), addressing implementation of regionally approved initiatives, at the national, regional, interregional and global levels. It also implements Plenipotentiary Conference Resolution 157 (Rev. Guadalajara, 2010), which focuses on strengthening the project execution function of ITU. These Resolutions also noted the need to maintain a level of expertise to permit BDT to manage projects effectively and in a timely and efficient manner.
These Guidelines aim to develop a common language and understanding of the main phases of the life cycle of a project, as well as the processes involved in and the key aspects of project design and implementation, while providing templates that will facilitate the work of project managers.
They also take into account the on-going efforts of the BDT in the adoption of the results based management approach, and will improve the implementation of projects by the BDT in close collaboration with its various partners. The drafting Guidelines also address and reflect the latest international standards for project management, especially the ISO 21500 that was announced in October 2012.
I hope that these Guidelines and templates will serve as a reference tool for all those involved in the implementation of BDT projects. This will no doubt improve our efficiency and effectiveness in implementing, monitoring and evaluating projects.
Brahima Sanou
Director Telecommunication Development Bureau
Project management guidelines - November 2013
v
Table of contents
Page
1 Introduction .................................................................................................................................. 1
2 Results based management and project management ................................................................... 3
2.1 Results based management ......................................................................................................... 3
2.2 Project management aligned with the RBM approach ................................................................ 4
3 Formulation phase ........................................................................................................................ 6
3.1 Identification ................................................................................................................................ 6
3.2 Fundraising ................................................................................................................................... 7
3.3 Finalization ................................................................................................................................... 8
3.4 Defining the project ..................................................................................................................... 8
3.5 Defining key performance indicators ........................................................................................... 10
3.6 Project document ......................................................................................................................... 10
4 Implementation phase .................................................................................................................. 11
4.1 Planning ........................................................................................................................................ 11
4.2 Executing and monitoring ............................................................................................................ 13
4.3 Closing .......................................................................................................................................... 15
5 Evaluation phase ........................................................................................................................... 17
5.1 Post implementation review ........................................................................................................ 17
5.2 Impact and sustainability analysis ................................................................................................ 19
5.3 Lessons learned and best practice ............................................................................................... 19
6 Improvement process .................................................................................................................... 21
Annex: Templates .................................................................................................................................... 22
A.1 Logical framework template ........................................................................................................ 23
A.2 Project document template ......................................................................................................... 25
A.3 Project management plan template ............................................................................................ 35
A.4 Project manager log template ..................................................................................................... 39
A.5 Meeting minutes template .......................................................................................................... 40
A.6 Risk monitoring form ................................................................................................................... 42
A.7 Change request form ................................................................................................................... 43
Project management guidelines - November 2013
vi
Page
A.8 Project progress report template ................................................................................................ 44
A.9 Assessment / feedback report template ...................................................................................... 47
A.10 Closure report template ............................................................................................................... 49
A.11 Transfer of title to equipment form ............................................................................................. 53
A.12 Post implementation review template ........................................................................................ 56
A.13 Impact analysis report template .................................................................................................. 58
A.14 Lessons learned report template ................................................................................................. 60
Project management guidelines - November 2013
1
1 Introduction In 2006, the ITU Plenipotentiary Conference approved Resolution 157 and revised it in 2010. Resolution 157 (Rev. Guadalajara, 2010) commits ITU to strengthen its project execution functions, and provides for the review of the experience of ITU-D in discharging its responsibility for implementing projects by identifying lessons learned, developing a strategy for strengthening this function in the future, and for the review of best practices in the area of technical cooperation (which includes project management) within the United Nations systems and other organizations external to the United Nations and to adapt such practices to the circumstances prevailing within ITU.
In line with the trends in project management, from an activity-based approach to results based methodology, Telecommunication Development Bureau (BDT) carried out a thorough review on project management practices of the United Nations, other development agencies and private sector organizations. The findings of the study, together with the assessment of BDT procedures in project management, demonstrated that the results based management (RBM) approach should be reinforced to strengthen project execution function of ITU.
BDT developed project management guidelines in 2008, which took into account RBM best practices, methodologies and tools of other organizations, as well as the project portfolio specific to ITU-D.
In 2011, a restructuring took place which redefined the roles and responsibilities of the Project Support Division (PRJ) within the Project Support and Knowledge Management Department (PKM). The PRJ strengthens the project execution function of BDT, is responsible for providing support for the development of regional initiatives and other projects, coordinates the drafting and finalization of project documents, directs the development of the supporting operational, reporting, and evaluation frameworks (including related procedures, best practices, systems, databases, tools, templates, reporting documents and performance indicators) for the consistent monitoring, implementation, evaluation and reporting of all BDT projects. PRJ also monitors and evaluates project implementation, carries out and reports on impact assessments of BDT projects, coordinates the preparation of documentation for the closure of projects with partners, submits and ensures timely definitive closure of projects, participates, provides inputs and contributes to the processing of outputs of connect the world series of events, and develops guidelines for the effective project execution at all stages of the project cycle.
In this context, the PRJ has updated the project management guidelines published in 2008 to reflect the restructuring and best practices contained in the latest project management standards (ISO 21500:2012 launched on October 2012 and PMBoK 5th Edition announced on December 2012).
These guidelines aim to provide clarification and guidance on a selected set of tools to be used by project managers based on the results based management approach and project management lifecycle.
Figure 1 illustrates the three phases of the project management lifecycle: formulation, implementation and evaluation.
Project management guidelines - November 2013
2
Figure 1: Project management life cycle
Source: ITU
The first phase focuses on identification of key problems and needs of beneficiaries through a situation analysis, and clarification of roles and responsibilities of parties involved. This phase presents stages to be used to prepare and develop a project proposal. This phase also provides information on how to facilitate the fundraising process in coordination with the partnership and resource mobilization strategies for approaching donors. Once funds are secured, the responsible project manager should complete the project document (ProDoc).
In the remainder of this document, the project manager is responsible for project implementation from ProDoc until the submission of closure report, and the project coordinator is a member of the PRJ team responsible for supporting the project manager, as well as monitoring and evaluation of projects.
When the ProDoc is approved and signed by the stakeholders, the project manager is responsible for the second phase (implementation), to plan, execute, control and close all project activities to achieve the objectives.
The first stage is essential for the planning of all activities to achieve the expected results, and those related to risk communication and acceptances. Proper planning is the critical factor for the success of the project. The next stage is to achieve the planned activities and monitor their implementation by different stakeholders. The last stage of this phase is related to the closure of all project activities and the transfer of results to those concerned.
Project management guidelines - November 2013
3
The evaluation phase is performed by the project coordinator. The first stage will be the post-implementation review that should be performed immediately after the implementation phase has been completed; in this review, the achievement of the objectives and outcomes will be measured and any initial recommendations will be made. The second stage should take place between one and three years after the project closure, and will analyse the project impact.
The last stage is to take into account performance indicators already established and to consolidate the lessons learned in order to provide best practices for future projects.
Table 1: Project management standards
ISO-21500:2012 October 2012
PMBoK 5th Edition December 2012 Prince2
Initiating Initiating Starting up a project
Planning Planning Initiating a project
Implementing Executing Managing a stage boundary
Controlling Monitoring and controlling Controlling a stage
Closing Closing Closing a project
2 Results based management and project management
2.1 Results based management
In an organization, results based management (RBM) aims to ensure that activities and resources contribute to the achievement of desired results, in terms of outputs, outcomes and the expected impact. A key component of RBM is monitoring the performance that helps to measure objectively how well the results are being achieved and report on measures taken to improve them.
«It is said that if you do not know where you are going to, any road will take you there. This lack of direction is what Results-Based Management is supposed to avoid. It is about choosing a direction and destination first, deciding on the route and the milestones, checking progress with a map and making direction adjustments as required in order to achieve the desired objectives.»1
The implementation of RBM and results based budgeting in ITU was first introduced in 2001 for the 2002-2003 budget, progressively extended to other planning tools (operational planning, strategic planning, financial planning) with the adoption of Resolution 71 (Rev. Guadalajara, 2010) regarding the Strategic Plan of the Union for 2012-2015 with a 100 per cent compliant RBM structure, which is a significant achievement towards enterprise performance management for ITU.
During the different phases of the life cycle of a project, the RBM approach ensures that the components necessary for the achievement of expected results will be available. Monitoring, in this case, implies the definition of key performance indicators (KPIs) that will help measure the achievement of the goals initially assigned to the project through implementation.
1 Results-Based Programming, Management and Monitoring (RBM) approach as applied at UNESCO- Guiding Principles – June
2011: http://unesdoc.unesco.org/images/0017/001775/177568e.pdf
Project management guidelines - November 2013
4
2.2 Project management aligned with the RBM approach
In order to apply the RBM approach to project management, it is suggested to adopt the following terminology based on the definitions proposed by UN Development Group2.
Table 2: Definitions proposed by UN Development Group3
Term UN Development Group definition
Results-based management (RBM)
Results-based management is a management strategy by which all actors, contributing directly or indirectly to achieving a set of results, ensure that their processes, products and services contribute to the desired results (outputs, outcomes and higher level goals or impact) and use information and evidence on actual results to inform decision making on the design, resourcing and delivery of the project and activities as well as for accountability and reporting.
Results Results are changes in a state or condition that derive from a cause-and-effect relationship. There are three types of such changes - outputs, outcomes and impact - that can be set in motion by a development intervention. The changes can be intended or unintended, positive and/or negative.
Impact Impact implies changes in people’s lives. This might include changes in knowledge, skill, behaviour, health or living conditions for children, adults, families or communities. Such changes are positive or negative long- term effects on identifiable population groups produced by a development intervention, directly or indirectly, intended or unintended. These effects can be economic, socio-cultural, institutional, environmental or technological. Positive impacts should have some relationship to the Millennium Development Goals (MDGs), internationally-agreed development goals, national development goals (as well as human rights as enshrined in constitutions), and national commitments to international conventions and treaties.
Goal A specific end result desired or expected to occur as a consequence, at least in part, of an intervention or activity. It is the higher order objective that will assure national capacity building to which a development intervention is intended to contribute.
Outcome Outcomes represent changes in the institutional and behavioural capacities for development conditions that occur between the completion of outputs and the achievement of goals.
Outputs Outputs are changes in skills or abilities and capacities of individuals or institutions, or the availability of new products and services that result from the completion of activities within a development intervention within the control of the organization. They are achieved with the resources provided and within the time period specified.
Activity Actions taken or work performed through which inputs, such as funds, technical assistance and other types of resources, are mobilized to produce specific outputs.
Inputs The financial, human, material, technological and information resources which are used for development interventions.
Performance indicator
A performance indicator is a unit of measurement that specifies what is to be measured along a scale or dimension but does not indicate the direction or change. Performance indicators are a qualitative or quantitative means of measuring an output or outcome, with the intention of gauging the performance of a project or investment.
2 www.undg.org/ 3 UNDG-Results-Based Management Handbook-Harmonizing RBM concepts and approaches for improved development results at
country level – October 2011.
Project management guidelines - November 2013
5
The pyramid in Figure 2 describes the adaptation of the RBM approach to project management and defines the various features of a project, from the resources to the expected impact.
Figure 2: RBM approach for project management4
Source: ITU
4 ITU – Result-Based Management – Result-Based Budget Training – Seminar - PwC – June 2012.
Project management guidelines - November 2013
6
3 Formulation phase This phase integrates the general approach of identification of needs to finalize the project document through the stage of fundraising. Depending on the context and the kind of project, it will be necessary to scroll through all the stages, or to go directly to the finalization of the project document.
Figure 3: Formulation phase
Source: ITU
3.1 Identification
During this first stage, the project proponent or the project manager should prepare a concept note5 to be shared with stakeholders and donors.
The identification stage intends to find answers to the question: What does the project need to achieve? The first stage in project management is to:
• perform a situation analysis in a particular political and socio-economic context;
• identify what are the problems on the ground and needs of beneficiaries;
• analyse the capacities of main stakeholders to be involved in the process of the project implementation;
• assess the sustainability of the project;
• have an impact on ITU-D programmes, objectives, strategies and on the ongoing action plan.
5 https://intranet.itu.int/bdt/Documents/ConceptNoteGuidelinesTemplate.pdf.
Project management guidelines - November 2013
7
In developing the project, it should identify the benefits that are designed to target a market or a population. The expected short and long-term results must be clearly identified in order to assess the impact they will have on beneficiaries.
This stage looks for a general assessment of problems that have been identified in an initial analysis. The key to successfully identify a problem is to understand its causes or constraints. Therefore it is critical that project managers and project coordinators understand the root (cause) of the problem and its effect on the target population, before formulating any objective, strategy or action plan.
In this stage it is essential to identify, consult and try to involve all stakeholders from the beginning of the process, so they will assume ownership over the project and its results. Roles and responsibilities should be clearly identified and assigned to the stakeholders.
The stakeholders in a project are all parties who are involved (partners) in or are affected by the project, or benefit from the project (beneficiaries). They include governments, agencies, international organizations, non-governmental organizations, civil society associations and citizens.
Key questions to be answered in the identification process include:
• What are the main challenges in a given political and socio-economic context?
• Who are the main domestic stakeholders and what have they experienced in this field?
• What are the current strategies to deal with identifying problems and of beneficiary needs?
• In order to avoid duplication of efforts, what are the other international/regional organizations working in this field?
• What are their lessons learned and strategies used to address similar issues?
• Which stakeholders would like to contribute to the project?
• How would you describe their roles and responsibilities during the implementation process?
• What is the ITU experience in addressing similar problems?
• How will the project be executed in comparison with existing or similar projects in ITU-D sector?
To facilitate the analysis above, it is recommended to use the template of logical framework presented in annex A.1.
3.2 Fundraising
This stage seeks to answer the question: who can invest in the implementation of the project and become a partner? The fundraising process is performed in line with the BDT resource mobilization strategy.
Convincing donors is obviously a matter for resource mobilization (RM), but it is also a communication exercise. RM, communication and branding focal points must therefore work hand in hand to serve the capital formation needs of colleagues involved in programme and project management.
The purpose of a concept note (CN) is to introduce a new communication and branding tool, as well as a vehicle to approach potential donors and expose our products, projects and initiatives in a harmonized way.
The CN is a synopsis or a (brief) preliminary description of a project or an initiative that aims at engaging potential donors deeper into a partnership/collaboration conversation.
Concept notes are used as an initial outline for potential partners’ consideration/review and as a guide for discussion, prior to the development and submission of a more complete proposal (as required according to donor mechanisms) or as part of formal submission processes. The CN is therefore a critical tool during the initial stage of resource mobilization.
The purpose of a concept note is to capture the interest of the donor and demonstrate that the project or initiative is worth further considering. It helps donors to determine if the described project or initiative fits with their goals and strategy and is likely to be accepted for fund allocation.
Project management guidelines - November 2013
8
The BDT has introduced a new concept note template to be used when looking for extra-budgetary funding. This template has been designed to fit a variety of templates and guidelines published by donors. It is accompanied by guidelines to facilitate the preparation of the notes.
The specific objectives of a concept note are:
• To provide tools to support BDT Resource mobilization efforts by all BDT staff (as recommended in the resource mobilization strategy for BDT).
• To have harmonized documents to be presented to potential partners, clearly stating and justifying the need for support for the proposed project or initiative.
• To permit existing or potential partners to explore the possibility of partnering with ITU in a proposed project or initiative (including allocating resources).
• To use the concept notes to develop (more) effective and powerful external communication and promotion policy, as well as supporting material to approach partners.6
3.3 Finalization As soon as sources of funds are secured and requirements and obligations of donors are clarified, a full-scale project proposal, in the form of a project document, can be prepared. A project document is a more comprehensive document that includes all available information gathered in the previous stages. The budget and work plan should be attached to the project document. The first activity is to determine the impact and objectives to be reached and to identify results. The second activity is to define indicators to measure performance of impact, objectives and results. In this stage, the logical framework tool should be developed to include data that would verify whether developed indicators are effective to measure the achievement of the best results. Finally, it is necessary to consolidate all information in the ProDoc, a template of which is presented in annex A.2.
3.4 Defining the project
This analysis corresponds to the preparation of the content of the various sections of the ProDoc:
Background and context This section presents information and explanations related to the project, and in particular why it should be implemented.
Objective
Taking into account the context and needs of the beneficiaries, an objective must be clearly defined and shared with stakeholders. In order to develop a well-constructed objective, the following issues should be taken into account:
• an objective should be articulated based on realistic and identified effects of problems;
• an objective is not equivalent to a project strategy, activities, processes and results;
• a clear distinction must be made between the formulation of an objective and results.
Expected results (as defined below) must contribute to the achievement of an objective.
6 https://intranet.itu.int/bdt/Documents/ConceptNoteGuidelinesTemplate.pdf
Project management guidelines - November 2013
9
Expected results
In order to define results, a clear vision should be elaborated of what the project hopes to achieve. Results are desired outputs (short-term) and impacts (long-term), and include tangible or non-tangible benefits to beneficiaries or end-users. Results can be expressed in quantitative or qualitative standard, value or rate. In other words, results are the direct consequences or effects generated by activities and lead towards the achievement of stated objectives.
The impact measures the long-term and widespread development changes in the society, economy and environment to which the project contributes.
Project activities
Activities should be selected on the basis of:
• a clear understanding of the problems;
• an analysis of the opportunities;
• an evaluation of the risks of the situation;
• an evaluation of available or expected resources and capabilities;
• the impact on ITU-D mission and goals.
Inputs
The inputs include financial and in kind contributions (premises, equipment, staff ...) of each partner.
Roles and responsibilities
It is necessary to clearly define the roles and responsibilities of the parties in the main activities of the project, as this avoids misunderstandings and problems in the implementation phase.
Risk
In this section, indicate relevant risks that can negatively affect the success of a project, and mention remedial actions foreseen in order to mitigate these risks.
Project management
Provide an overall description of the project management. In this regard, elaborate management structure and terms of reference agreed upon by project partners.
Monitoring and evaluation
Provide an overall description of the project monitoring and evaluation activities. In this regard, elaborate reporting requirements and frequency of such reports.
Sustainability
Elaborate on how the sustainability of the project is to be achieved. If applicable, describe sustainability measures, such as the self-financing mechanisms, that will be put in place upon the completion of the project.
Budget and work plan
Each project document will be accompanied by two annexes:
1. the first annex defines the budget including details about the contributions of each party, as well as lines for expenditure;
2. the second provides the schedule of major activities and their sequence for the project implementation.
Project management guidelines - November 2013
10
3.5 Defining key performance indicators
Once the project impacts, objectives, results and activities have been clarified and agreed by stakeholders, the next stage is to develop indicators to measure the performance of each result, each objective and the overall impact. If results are clearly stated, it is easier to select indicators. An indicator is a means of measuring actual results against planned or expected results in terms of quantity, quality and timeliness.
The quantitative indicators are defined as a numerical value, usually expressed in specific numbers or a percentage, but the qualitative indicators reflect perceptions, judgments, satisfaction or opinions.
In order to select a good indicator, a participatory process of discussions amongst all stakeholders should apply. Most commonly used criteria to assess indicators are “SMART” criteria to guide the setting of objectives.
Box 1: Smart description
• Specific: Sufficiently precise to enable an objective assessment and measurement of the results achieved by project.
• Measurable: Qualitatively or quantitatively, and formulated to facilitate comparisons between predictions and achievements.
• Attainable: Defined at a level that can be achieved and that represents activities that enable a particular result.
• Realistic: Measures should be determined in a realistic manner, given the respective project resources and time frame.
• Time-based: Express benefits or changes that a project aims to achieve by the end of the implementation period.
3.6 Project document
The project document (ProDoc) is a key document that finalizes the formulation phase. It must contain all information about the context in which the project must be completed, its impact on the social and economic environment, the objectives and expected results, definition of roles and responsibilities of stakeholders, as well as the budget for its implementation.
The details of the contents of this ProDoc are in annex A.2, including explanations and examples that will facilitate its drafting.
Project management guidelines - November 2013
11
4 Implementation phase This phase seeks to answer the question of what needs to be done in order for the project to be implemented successfully. The first stage of implementation involves the planning of project activities to facilitate the allocation of resources and the monitoring of such activities. Executing and monitoring stages include a continuous process of controlling so that planned activities take place and results are achieved as anticipated. The third stage is related to closure of the project activities.
The project coordinator could monitor the implementation of the project and ensure appropriate guidance where necessary, including providing feedback after reception of quarterly progress report. This also will facilitate the project evaluation phase, and prevent potential problems in implementation.
Figure 3: Formulation Phase
Source: ITU
4.1 Planning
The key to a successful implementation depends on the quality of the planning carried out by the project manager before the start of activities. The main objective in the planning phase involves the creation of a project management plan. The template for this mandatory document is proposed in annex A.3.
The project management plan provides a basis for evaluating the performance of the project during its implementation. It includes a complete list of the activities required to complete the project: work breakdown structure, project schedule, procurement plan, quality plan, risk plan, and communication plan.
Work breakdown structure
The work breakdown structure lists all the outputs/results and activities required to be achieved and undertaken under the project.
Project management guidelines - November 2013
12
Project schedule
The project manager should list necessary activities to achieve each deliverable defined as outputs/results. For each of the activities, the project manager will determine the workload and duration necessary for its completion, taking into account their interdependencies.
Procurement plan
The project manager should concentrate on definition of requirements (terms of reference for services, technical specifications for equipment).
To estimate the delivery taking into account the needs, and to develop a preliminary schedule of purchases, the project manager must coordinate with the procurement division which is responsible for the relationship with suppliers.
The project manager must plan the acquisition of products and services needed to achieve the project deliverables. Control and monitoring of the plan will allow the project manager to mitigate risks related to the non-mastery of suppliers and external service providers.
Quality plan
The quality plan determines the quality criteria and standards that must reflect the needs of the beneficiary and that must be achieved by the project deliverables. The plan must also include the required verification and quality assurance of the project deliverables and also will check whether the processes to achieve the quality criteria are met.
Thus, the project manager must plan for both control quality and assurance quality activities.
Risk plan
It is essential to identify the key project risks, and list the actions that will reduce their impact on the project.
The project manager must:
• identify the potential risks;
• define a priority ratio for each risk (e.g. likelihood score / impact score);
• select risks that will be followed;
• identify activities that will mitigate the impact of risks on the project;
• create an activity schedule related to risks mitigation.
Communication plan
Lack of communication is often at the root of the difficulties encountered during the project. This communication involves the steering committee, the project team, the beneficiary and other stakeholders.
The project manager must plan specific activities to carry out effective communication, including the following:
• define the list of stakeholders who should be informed about the progress of the project;
• identify the type of information to be transmitted to each group of stakeholders;
• identify methods of communication to be used;
• build a communication plan.
Project management guidelines - November 2013
13
4.2 Executing and monitoring
Building deliverables
The first and most important activity in the executing and monitoring stage is the development of each of the project deliverables/results specified within the ProDoc. The deliverables are then reviewed to ensure that quality criteria are met. If all the quality criteria have been met, then the deliverables are signed off by the beneficiary. Transfer of titles and ownership of equipment and other assets, which form part of the deliverables of a project, should be carried out in accordance with section 4.3 of these guidelines and the transfer of title to equipment template (annex A.11).
Executing
The executing process performs all the activities defined in the planning. The project manager must be able to assign activities to each person responsible for implementation, while ensuring the monitoring and controlling of their execution.
Implementation of the project should be carried out with regular meetings planned by the project manager, and project execution should be reported according to the meeting minutes template (annex A.5).
Monitoring and continuous assessment makes it easier to judge the gaps between the schedule, the planned budget, and realizations. Monitoring also aims to ensure effectively managed results through measurement and assessment of performance. The overall objective of monitoring is to enable the project manager to undertake corrective actions.
Project execution is an internal management responsibility and can be performed by the project manager through:
a) Time management
The time spent for each activity will be monitored in order to prevent delays that will impact the delivery of the project.
b) Budget monitoring
The project manager must have constant access the data or information regarding the project budget utilization (contributions received, commitments and expenditures). Budget monitoring is an essential aspect of good project management to ensure that expenditures and commitments remain within established allocations and the overall project budget. Close follow-up with appropriate financial services is the key to monitoring costs and forecasting any potential deviation from the original budget plans. Project partners and especially donors should be kept informed through financial reports, and substantive deviations from the original budget plans should be reflected in budgetary reviews each quarter.
c) Procurement management
After the definition of requirements for the project, the whole process of procurement of goods and services is the responsibility of the procurement division.
Therefore, the project must be monitored regularly with the procurement division.
d) Quality management
Quality management ensures that the quality criteria previously agreed with the beneficiary are met. It will also ensure that the quality control processes designed to achieve the desired quality criteria of the project deliverables are followed.
Project management guidelines - November 2013
14
e) Risk management
Risk management should carry out the following activities:
• take into account the risks identified during the assessment at the planning stage;
• develop a detailed sheet for each risk using the risk monitoring form template (annex 1: A.6);
• ensure follow up activities related to the mitigation of each risk;
• review and update the risk matrix regularly.
f) Communications management
This entails the regular monitoring of communication activities, as they were defined at the project management plan (annex 1: A.3), and carry out the following:
• prepare the content of each communication action;
• prepare the necessary materials;
• communicate information to stakeholders according to the expected timing.
g) Change control
The process of change management is very important, as it can control the flow of change requests that usually come from the beneficiary. These requests may involve minor changes but they can also involve major changes that have a significant impact on time and on budget. Keeping a good track of changes will prevent delays in project development and budget overruns.
The process of change control is to perform the following actions:
• receive the request for change in the format provided in the change request form set forth in (annex 1: A.7);
• analyse how to support the change request;
• submit the request to the steering committee or management committee when the impact is significant (duration, budget);
• modify activities and the action plan accordingly.
Reporting
Reporting is the formal presentation of controlling information using the project progress report template (annex A.8) ,the assessment/feedback report (annex A.9), and the project manager log (annex A.4).
Reporting aims to:
• inform stakeholders on the progress of the project, as well as of arrangements to ensure proper development of the project;
• provide formal documentation of activities in order to facilitate audits and evaluations;
• serve as a reference to future projects in order to ensure that lessons learned (project successes, failures, best practices) through implementation are available for consideration when formulating and implementing similar projects;
• promote transparency and accountability;
• report to donors and stakeholders on project progress.
Project progress report
The project progress report is required for all projects and is prepared by the project manager on a quarterly basis. The reports provide a framework for assessing status and a record of project implementation at any given time. However, its primary aim is to ensure that supervisors of the project coordinator or project manager formally assess the status of project implementation. The progress reports should be prepared quarterly and be submitted in the second week of the following quarter.
Project management guidelines - November 2013
15
Project manager log
To facilitate the preparation of these reports, it is recommended to use the project manager log (annex A.4), which integrates the main events and information related to the project, as well as setting out specific columns to each report. The project manager can sort and retrieve information using the column for the report to be developed.
Assessment/feedback report
The assessment/feedback report (annex A.9) is prepared by the project coordinator based on the quarterly project progress reports produced by the project manager, and in some cases (e.g., difficulties encountered, timeout, insufficient budget), decisions may require further approval by senior management or the relevant department (e.g. procurement department).
In this assessment, the project coordinator must ensure that decisions have been implemented correctly and documented.
During the life of the project, it may be necessary to provide a mid-term evaluation to be conducted by the internal project team or by an external consultant depending on the importance of the project.
4.3 Closing
The narrative and financial closures are determined by the dates indicated in the original agreement signed with the donors/project partners/stakeholders, or in subsequent approved project extensions. Narrative closure refers to completion of all operational activities and financial closure includes termination of all financial transactions. Closure should be performed immediately after completion of all project activities.
It is important to distinguish between the two stages of project closure, the closure of activities (i.e., narrative closure or operationally completed) and financial closure, and the main activities to be performed during each of these stages.
The project is operationally completed when:
a) all activities listed in the project document are satisfactory completed;
b) the envisaged results are produced;
c) the closure report and post implementation review are prepared;
d) contracts with personnel, suppliers and service providers are terminated;
e) products have been delivered to the satisfaction of the beneficiary;
f) decisions have been taken regarding the residual funds of the project, if any.
All rights, titles and ownership in and to all equipment and other assets that were acquired under the project for the beneficiary must be transferred and assigned by ITU to, and have been accepted and assumed by the beneficiary (transfer of title to equipment template, annex A.11).
It is understood that the transfer will be made during the development of the project and the project manager will incorporate the proof of transfer in the closing portfolio. The timing at which such transfer of title should occur will depend on the type of asset to be transferred (i.e., tangible assets vs. intangible assets). For more information concerning such timing, please refer to the general instructions included in the transfer of title to equipment template.
The closure report (annex A.10) is required upon completion of all project activities and contains information on the achievements of objectives, results and activities of the project. It should clearly explain any variances from the originally approved project in terms of duration, budget, results and delivered services. The closure report should be submitted within 30 to 60 days of the operational completion of the project, unless a different specific time frame is stipulated in the relevant agreements with project donors/partners/stakeholders.
Project management guidelines - November 2013
16
The project is financially completed when:
a) all requested funds have been received;
b) bills have been fully paid and liquidated;
c) expenditures have been recorded;
d) the final budget revision has been carried out;
e) the final financial report has been prepared and submitted to the donor;
f) the final signed statement of accounts has been prepared and received by the donors / partners / stakeholders;
g) the final financial explanatory report has been prepared and submitted to the donors / partners / stakeholders;
h) the remaining funds, if any, have been returned to donors/partners/stakeholders or re-allocated to other projects following donor / partner / stakeholder approval.
The financial project closure is the responsibility of the ITU finance department, which must check all the points mentioned above before proceeding for the final closure.
Project management guidelines - November 2013
17
5 Evaluation phase Before the end of the project, the project coordinator should supervise two assessments:
1. Ex-ante evaluation of the project through the ProDoc, to be completed at the end of the formulation phase.
2. Mid-term evaluation to be carried out by the project coordinator or by an external consultant, depending on the size of the project. This evaluation is undertaken approximately half-way through project implementation to:
a) analyse the development of the project;
b) check that it is being carried out as planned;
c) identify the difficulties to be overcome either in-depth or through desk evaluations.
The evaluation phase is in addition to the ex-ante and a mid-term evaluation and takes place after the completion of a project or main activities within the project. Several stages are involved in the preparation of the evaluation process, such as to plan evaluation with assistance of a post-implementation review plan, to report on the outcomes of evaluation using the relevant report templates, and to describe lessons learned and best practices. Evaluation involves financial resources that should be incorporated in the budget planning before the project start date.
Figure 5: Evaluation phase
Source: ITU
5.1 Post implementation review
This stage will be performed after completion of the project according to a schedule previously established by management. Depending on the kind of project, the evaluation will be carried out on site or through a desk review, and in some cases external consultants could be required.
Project management guidelines - November 2013
18
Based on key performance indicators defined in the ProDoc, the post implementation review assesses whether the objectives and results were achieved in an effective and efficient manner, and from the project implementation it also provides:
• scope of evaluation;
• key findings;
• conclusions;
• recommendations.
Planning the review
The review plan outlines what is to be evaluated, by when, and with whom. It should also provide resources and budgets necessary to carry out these assessments.
The criteria of relevance, efficiency and effectiveness are especially important in the process of designing the review plan:
• Relevance: Outlines the appropriateness of project objectives to the problems that it had planned to address. The review plan must integrate the quality assessment of the definition and formulation of the project.
• Efficiency: Provides the factual information that the project results have been achieved at a reasonable cost, i.e. how well the results have been achieved in terms of quality, quantity and time. To ensure that the most adequate process has been adopted, it would be useful to analyse alternative approaches.
• Effectiveness: Examines the contribution made to achieve the best results. This is designed to assess the benefits for the different categories of the population (women, children, elderly, persons with disabilities, and vulnerable groups).
The evaluation plan should also take into account:
1 Choice of evaluation: Management is responsible for the choice of results and projects to be evaluated.
2 Timing of evaluation: The plan should specify timing of each evaluation.
3 Stakeholders of each planned evaluation: Not only stakeholders who were involved in the project and who are affected by the results of the evaluation.
4 Financial Requirements: The evaluation plan should estimate the financial requirements for each evaluation. Dissemination of information should also be included in the budget plan.
In addition, the evaluation plan should pay particular attention to any information that would be useful for ITU and its partners in the strategy and decision-making process.
Evaluation report
The post implementation review template is the means to assess the relevance, efficiency and effectiveness of the project implementation and results achieved. As an outcome, the evaluation process will provide a report containing recommendations and lessons learned that will improve future policies and projects, and establish a basis for accountability.
The post implementation review (annex A.12) will not only reflect the results achieved and decisions taken but will also allow conclusions to be drawn that will help to improve future project implementation.
A good evaluation report will clearly, accurately and appropriately communicate findings, lessons learned and recommendations, and while being an objective presentation of the project, it also ensures that the concerns and comments of the involved parties are correctly reflected.
Once the post implementation review is prepared, it should be published and disseminated to all stakeholders.
Project management guidelines - November 2013
19
5.2 Impact and sustainability analysis
The contribution of a project to the development of a market, population, or environment, must also be measured several years after it ends. Unlike the evaluation carried out on closure of the project to ensure that the objectives and expected results are achieved, an impact analysis should be conducted one to three years after the project has been completed.
The impact analysis assesses the level of success of the project and, in particular, its durability and the impact of initially identified indicators and criteria defined in the ProDoc. The impact analysis enables evaluation of the effects on the socio-economic environment, the general policy or sectorial objectives.
A project can be said to be sustainable as long as it continues to deliver benefits to the project target groups. Therefore, for the monitoring of sustainability, quality factors should be considered such as:
• ownership by beneficiaries;
• appropriate technology;
• institutional and management capacity;
• socio-cultural issues;
• environmental factors;
• damages.
Sustainability analysis assesses how the project can continue its activities without external funding, as well as the beneficiaries' ability to independently manage the project.
Impact evaluations focus on the entire range of project results, including unforeseen and longer-term impacts and sustainability on people outside the immediate target groups.
The realization of this analysis should include the following considerations:
1 From the previously established indicators, define the scope of the analysis to obtain useful information for ITU and its partners.
2 Determine the schedule of actions to be taken and who should carry them out.
3 Estimate the budget needed to achieve the mission.
4 Prepare media collection of information.
5 Collect data with project stakeholders.
6 Develop an impact analysis report using the template in (annex A.13).
5.3 Lessons learned and best practices
The last stage of the life cycle of the project is to analyse and consolidate lessons learned for projects that have been identified during the implementation and evaluation phases, by using the template that is presented under (annex A.14). This analysis will provide examples of best practices from effective and efficient projects that have delivered concrete and sustainable benefits to the beneficiaries. Once identified, they will be stored in the best practices database.
Project management guidelines - November 2013
20
Best practices of projects will be consolidated in a database that will be available to all managers and focal points. This will enable them to work out project solutions to address similar types of problems in other regions/countries and replicate best practices where appropriate. This database will also allow BDT to report back to membership on success stories and achievements made through implementation of projects.
An organization’s best practices process includes a number of essential tasks:
1 Collection of relevant materials: This not only includes project reports, but would also consider other internal or external sources of information.
2 Verification: Focuses on validating lessons according to selected standards (relevance, significance, credibility of information and others) and identifies systemic issues and improvement opportunities.
3 Storage: Provides a database for categorization, indexing, and formatting of lessons’ representation.
4 Dissemination: Includes different avenues informing relevant parties on best practices.
5 Reuse: Focuses on encouraging/promoting best practices to be used by project managers.
As a tool, the best practice database aims to bring together any lessons learned that have been gathered during the project implementation that can be usefully applied to other projects. The content of this database should be discussed with stakeholders so that they may benefit ITU experience and best practice.
Figure 6: Lessons learned and best practices
Source: ITU
Project management guidelines - November 2013
21
6 Improvement process To ensure continuous improvement of the ITU project management guidelines, it is necessary to implement mechanisms for flexibility, revision, adjustment and learning, including to:
• establish and support data collection and analysis at the community level;
• utilize biannual meetings to review project management performance;
• establish electronic systems to post questions, share technical information and offer assistance to facilitate knowledge sharing and exchange;
• organize cross-regional learning processes, such as workshops and retreats, to take stock and analyse results;
• actively participate in ‘communities of best practice’ –many of which are online – to share best practice and seek advice for ongoing challenges from peers and experts.
Project management guidelines - November 2013
22
Annex: Templates
Among the fourteen (14) templates presented under the various subsections of this annex, eight are mandatory and the other six are optional. However, they should all be afforded consideration as they can help project managers to achieve their mission. Four of the mandatory reports will be elaborated by the project coordinator.
In some templates, explanations are given to allow the user to complete the document without returning to the information contained in the project management guidelines.
1 Logical framework
2 Project document (mandatory)
3 Project management plan (mandatory)
4 Project manager log
5 Meeting minutes
6 Risk monitoring form
7 Change request form
8 Progress report (mandatory)
9 Assessment / feedback report (mandatory)
10 Closure report (mandatory)
11 Transfer of title to equipment
12 Post implementation review (mandatory)
13 Impact analysis report (mandatory)
14 Lessons learned report (mandatory)
NOTE: In each template in this annex, explanations and examples are written in blue and in square brackets are for information only and must be deleted from the final document.
Project management guidelines - November 2013
23
A.1 Logical framework template
[Identify the key indicators for evaluating the resources used and the impact of the project, as well as the data sources to verify the achievement of indicators.
Following the examples of problem and objectives trees, a logical frame is given below for illustration.]
LOGICAL FRAMEWORK: IMPACT, OBJECTIVES AND OUTCOMES
Narrative summary Performances indicators Means of verification Risks and assumptions
Overall Impact: Socio-economic development in X region of country Z due to increase access to information
N % reduction in the percent of population lacking access in region X by 2 years after the start of the project
Survey report on reach to ICT
Objective: Enhanced and sustainable infrastructure for X region of country Z
N% increase in teledensity by 6 months after project implementation
ITU publications Statistical Survey of Statistics Department of Country Z
Tariffs are maintained at an affordable level Universal service funding is in place
Outcomes: 1. Infrastructure extended to provide coverage of rural parts of region X 2. Reliable infrastructure operated and maintained by qualified staff
Infrastructure is in operation by the end of the project Upward trend in the number of subscriptions 6 months after completion of the project Increase in traffic originating from or terminated in region X 6 months after completion of the project Increase in overall traffic volume 6 months after completion of the project Reduced rate of faults by the end of the project Reduced maintenance and operation costs Increased capacity of staff to perform technical functions
Site visits Yearly statistics provided by the operators Financial records of the operators Attendance lists of trainings participants
Service providers and implementation partners fulfil legal and contractual obligations in agreed time-frame Equal amount of M/F took part in a training programme Stable economic situation allowing reduction of maintenance and operation costs
Project management guidelines - November 2013
24
LOGICAL FRAMEWORK: OUTPUTS/RESULTS AND PRECONDITIONS
Activities Resources Costs Risks and Assumptions
1. Output/Result 1 1.1. Perform a Feasibility study 1.2. Prepare a network planning 1.3. Procure necessary equipment and install 2. Output/Result 2 2.1. Carry out gap analysis and needs assessment on existing network 2.2. Provide training for technical staff on network maintenance and operation 2.3. Procure necessary equipment and install
Senior expert on economic analysis Telecommunications experts Missions Training arrangements Equipment Project office
Feasibility study results in favour of the investment Required information is available, accurate and up to date No compatibility problem for the procured equipment High level of participation in the trainings There are no delays due to land expropriation
Preconditions: Readiness of project partners input. Security in the region is maintained
Project management guidelines - November 2013
25
A.2 Project document template
Logo
[Partner name]
Project number
SUMMARY OF CONTRIBUTION OF THE PARTIES
Project Budget (in CHF)
Description Total Partner
In-cash
Partner
Staff Costs
Missions External services Training Equipment Miscellaneous Sub-total ITU AOS (-- %) Total Comments :
Project title
Internet Exchange Points (IXPs): keeping local Internet traffic
Estimated start date January 20xx
Estimated end date December 20xx
U.N. Specialized Agency
International Telecommunication Union (ITU)
Government Cooperation Agency
Ministry of …
Beneficiary country(ies)
…..
Project manager …..
Brief description
Example: To achieve the objective of keeping local Internet traffic local, some countries have established national Internet Exchange Points (IXPs) and Internet Service Provider (ISP) peering has emerged as one of the most important and effective ways for ISPs to improve the efficiency of operation and to further reduce Internet access costs. This project will provide a [Beneficiary Country] to improve its Internet Connectivity. The overall aim is to provide affordable Internet access and connectivity through the implementation of national and regional Internet exchange points.
For the Signature Date Name/Title
__ / __ / ___
__ / __ / ___
Project management guidelines - November 2013
26
1 Background and context
[In this part, provide description of the proposed solution. Provide available information and explanation related to the project; regarding its origins and why it is being undertaken. Any information related to the details of the proposed solution that does not fit into other sections can be elaborated in this section.]
1.1 Introduction
[Example:
Information and Communication Technologies (ICTs) are cost-effective in providing a powerful engine to help achieve development goals. For example, they can be used to reduce poverty, build capacities, enrich skills, and inspire new approaches to governance and conflict resolution. The Information Technology contributes for promoting the development of many countries, but this project will enhance connectivity with reasonable cost to achieve other kind of activities.
Many countries have yet to build the basic infrastructures needed to take advantage of the information age, and would face a formidable challenge to build a pathway that would reduce the gap between them and the rest of the world.]
1.2 Problem statement and justification
[Example:
As a follow-up to the Connect Africa Summit (Kigali, Rwanda, 29 30 October 2007) in line with the creation of national Internet Exchange Points (IXPs) and implementing competition in the provision of international Internet connectivity (Connect Africa, Goal 3), this project aims to significantly increase access to affordable ICTs for all people, in both urban and rural areas, are able to gain maximum benefit from the opportunities offered by ICTs.
The primary objective of the project, therefore, is to strengthen the ability of countries to keep their internet traffic locally, while ensuring an affordable cost for access.]
1.3 Project scope and strategy
[Example:
The project aims to share experiences, knowledge and benefits relating to the establishment of IXPs centres to other developing countries. Under this arrangement, the project will:
• Identify case studies that have been successful, particularly in similar situations;
• Provide scientific and expert support to present processes of infrastructure development for IXP and access in [Beneficiary country].
• Provide IXP equipment and put into operation and transfer the IXP to the local partner institution.
• Promote public and private sector partnership in the development of IXP policies and for actions. Stakeholders in [Beneficiary country] are to be involved from the start, and the project will encourage sharing of responsibilities and clear definition of roles among key stakeholders.]
Project management guidelines - November 2013
27
1.4 Impact
[Impact = Development objective
As part of the overall objectives of developing a population or market, the project will contribute to some of them.
The criterion of the impact of the project on the beneficiaries will assess the achievement of these objectives several years later according to the type of project.
Impact Indicators
These indicators should measure the evolution of the situation of a market or population, following the implementation of the project. In some cases, it’s possible to make a qualitative description of the expected impact.
Impact Indicators are essentially used during evaluation of Impact analysis.]
[Example:
These technologies are already making an important contribution to the economic and social development of African countries; African populations can multiply this contribution several times over by increased connectivity and cost-effective access to the Internet.
Many African countries have yet to build the basic infrastructures needed to take advantage of the information age, and would face a formidable challenge to build a pathway that would reduce the gap between them and the rest of the world. The gap could widen and become self-perpetuating as the technologies become more advanced.
The project will significantly increase access to affordable ICTs in [Beneficiary country] in order to facilitate a technological environment in which all people, in both urban and rural areas, are able to gain maximum benefit from the opportunities offered by ICTs.
In line with the creation of national IXPs and implementing competition in the provision of international Internet connectivity (Connect Africa, Goal 3), the project will strengthen the ability of countries to keep their internet traffic locally, while ensuring an affordable cost for access..]
2 Project objective
[The project must achieve a primary goal. This section should clearly define the sustainable benefits expected by a market or population.]
[Example:
The objective of the project is to strengthen the capacity of [Beneficiary country] by providing cost-effective access and implementing competition in the provision of international Internet connectivity to the Internet by keeping local Internet traffic local through Internet Exchange Points. ]
[Assumptions/Preconditions
To ensure a harmonious development of the project, it should be analysing the assumptions and preconditions that will achieve the objective]
3 Expected results
[Expected results are products and services produced, or competences and capacities established, directly as a result of project activities. The result indicators are predominantly used during monitoring and evaluation.]
Project management guidelines - November 2013
28
3.1 RESULTS 1
3.2 RESULTS 2
3.3 RESULTS 3
[The Result indicators are predominantly used during monitoring and evaluation.
Provide Key Performance Indicators for each result that are specific, measurable, attainable, realistic and time bound in order to allow measurement of expected results in terms of quantity, quality and timeliness.]
Result Key performance indicators (KPIs) Target
1 [ enter indicator]
[ enter indicator]
2 [ enter indicator]
[ enter indicator]
3 [ enter indicator]
[ enter indicator]
4 Project activities
[Project activities: Specific activities performed using resources and methods in order to achieve the expected Results.
Implementation of activities depends on the availability of skilled human resources and the capacity of stakeholders to support the development of the project.
Describe the main activities required for achieving expected Result.]
Result Activity description Responsible party(ies)
1 1.1 [enter activity ] [ITU/partner/beneficiary]
1.2 [ enter activity ] [ITU/partner/beneficiary]
1.3 [ enter activity ] [ITU/partner/beneficiary]
…
2 2.1 [ enter activity ] [ITU/partner/beneficiary]
2.2 [ enter activity ] [ITU/partner/beneficiary]
2.3 [ enter activity ] [ITU/partner/beneficiary]
…
3 3.1 [ enter activity ] [ITU/partner/beneficiary]
3.2 [ enter activity ] [ITU/partner/beneficiary]
3.3 [ enter activity ] [ITU/partner/beneficiary]
Project management guidelines - November 2013
29
5 Inputs
[Inputs: Resources (personnel, equipment) and finance necessary to perform the planned activities and manage the project.]
5.1 ITU
IN CASH CONTRIBUTION
IN KIND CONTRIBUTION
5.2 Partner
IN CASH CONTRIBUTION
IN KIND CONTRIBUTION
5.3 Beneficiary country
IN CASH CONTRIBUTION
IN KIND CONTRIBUTION
[Example:
• Contribution from <partner name]: specific computer hardware and software, pre-defined funds for the learning centre to maintain itself, training programme, cost of training of trainers;
• Contributions from ITU (in kind but some contributions in cash may be made available);
• Contributions from the Government Agency (in kind): Provides a coordinator and premises for hosting the project.]
6 Roles and responsibilities
6.1 ITU
[Example:
ITU will:
• Provide staff resources for the coordination and management of the project and be responsible for the overall management of the project implementation, supervision, monitoring, coordination and evaluation;
• Provide its expertise and international experience to enable realization of the project objectives in an effective and efficient manner;
• Allocate the experts for the project as per contract and terms of reference;
• Correspond with the relevant parties to make sure that project is successful;
• Etc.]
Project management guidelines - November 2013
30
6.2 Partner
[Example:
Partner will:
• Provide staff resources for the coordination and management of the project;
• Correspond with relevant parties to make sure that project is successful;
• Etc.]
6.3 Beneficiary country
[Example:
Country will:
• provide all permissions necessary or required to carry out project activities, including, without limitation, all authorizations, permits, certificates, visas and other instruments necessary or required for ITU and/or any of its personnel (including experts) to implement the project;
• provide all exemptions from any and all prohibitions, restrictions on imports, custom duties, direct and indirect taxes, and any other fees in respect of imported items that may be required under the project;
• provide administrative support and staff required during the project implementation and any other assistance to the project;
• Etc.]
7 Risk management
[This section describes the relevant risks that can negatively affect the success of a project. In addition, this section rates the Likelihood and Impact of each risk should it occur, using a scoring (High, Medium, Low) and suggests the mitigation actions for reducing risks to the project.]
Risk description Likelihood Impact Mitigation action
The lack of control over the local resources
H* H* Collaboration of the relevant government agency
The collection of information necessary to complete the project
L* M*
* H= High, M=Medium, L=Low
8 Project management
[In this section, provide an overall description of the project management. In this regard, elaborate the management structure and terms of reference agreed upon by project partners.
Provide information on roles and responsibilities of the steering committee, its composition and working methods as well as the roles and responsibilities of the parties.
The implementation of project management structures depends on the size of the project and its complexity. There are three kinds of project sizes: small (< CHF 150’000), medium (< CHF 500’00) and large (> CHF 500’000).]
Project management guidelines - November 2013
31
8.1 Steering committee / management committee
[For large projects, the establishment of a "steering committee" is strongly recommended and its composition, the roles and responsibilities of its members and the frequency of its meetings should all be clearly defined under this section.
For small and medium projects, it is recommended to set up a management committee composed of a manager from ITU and a decision maker for each stakeholder. This committee will oversee the work done by the project manager and take the necessary decisions.]
[Example:
The role of the steering committee/ management committee will include:
• approve the project management plan as defined by the project manager;
• approve changes have a significant impact on the project and presented by the project manager;
• provide advice and directives concerning the progress of the project.
The steering committee/ management committee will consist of:
• representative of the partner/beneficiary;
• ITU Regional Director;
• Chief of related departments]
8.2 Project manager
[Example:
The project will be implemented by the assigned project manager in close coordination with beneficiary Member State focal point(s) and partner.
ITU as the implementing agency will supervise and administer overall implementation of the project in accordance with ITU rules, regulations and procedures.]
8.3 Project management team
[Example:
The complexity of the project will need a dedicated project management team for its implementation. This team will consist of:
• an assistant project manager in charge of studies;
• an assistant project manager in charge of implementation.]
9 Monitoring and evaluation
[In this section, provide an overall description of the project monitoring and evaluation activities. In this regard, elaborate reporting requirements and frequency of such reports.]
[Example:
Quarterly reports will be prepared to describe the progress of the project. Syntheses will be for stakeholders to keep them informed of project development. At the end of the project, the ITU project manager will submit a report to ITU and “partner”. The final project report will include, among other things, reasonably detailed descriptions of the activities, achievements towards expected outcomes, lesson learned and recommendations for future actions.
ITU together with the “partner” will monitor and evaluate the project based on the expected results and key performance indicators.]
Project management guidelines - November 2013
32
10 Sustainability
[In this section, elaborate on how the sustainability of the project is to be achieved. If applicable, describe sustainability measure, such as the self-financing mechanisms, that will be put in place upon the completion of the project. ]
[Example:
At the end of the project, the recipient country will establish a business model that will enable it to sustain the project.]
11 Budget
[The budget for this project is set forth in Annex 1 attached hereto.]
12 Work plan
[The work plan for this project is set forth in Annex 2 attached hereto].
Project management guidelines - November 2013
33
Annex 1: Budget
PROJECT BUDGET (IN CHF)
Description Total Partner in-cash Partner
Staff costs
Subtotal:
Mission
Subtotal
External services
Subtotal:
Equipment
Subtotal:
Other charges
Miscellaneous
Subtotal
Subtotal
AOS (-- %)
Total
Grand total
Comments :
Project management guidelines - November 2013
34
Annex 2: Work plan
[The work plan should be detailed during planning stage and reviewed during project implementation, as required.]
Project management guidelines - November 2013
35
A.3 Project management plan template
PROJECT MANAGEMENT PLAN
Project number Project manager
Project title
Start date End Date Budget
Brief description
Prepared by Date
[The first stage in the project planning phase involves the creation of a project plan. This plan includes all the criteria that will be used to evaluate the performance of the project. It defines a complete list of the activities required to complete the project, as well as the milestones, resources and timeframes involved in undertaking the project.
The actions involved in creating a project plan are the following: …]
Work breakdown structure (WBS)
The work breakdown structure lists all the outputs/results and activities required undertaking the project.
Outputs/results
Result Description
Activities
Result Activity Human Resources Workload Duration Activity
Sequence
1 1.1
1.2
1.3 1.1;1.2
2 2.1
2.2
Project management guidelines - November 2013
36
Schedule
Result Activity description Duration M1
M2
M3
M
12
1 1.1 [ enter activity ]
1.2 [ enter activity ]
1.3 [ enter activity ]
…
2 2.1 [ enter activity ]
2.2 [ enter activity ]
2.3 [ enter activity ]
…
3 3.1 [ enter activity ]
3.2 [ enter activity ]
3.3 [ enter activity ]
…
Procurement plan
[The project manager should identify the list of requirements and coordinate with the procurement division to supplement the budget estimates.
The estimated delivery date will set the launch date of the purchase process, taking into account the time recommended by the procurement division.]
Result Activity description Equipment or service
Quantity and unit
Estimated budget (CHF)
Estimated delivery
date
Start date purchase process
1 1.1 [ enter activity ]
1.2 [ enter activity ]
1.3 [ enter activity ]
…
2 2.1 [ enter activity ]
2.2 [ enter activity ]
2.3 [ enter activity ]
…
3 3.1 [ enter activity ]
3.2 [ enter activity ]
3.3 [ enter activity ]
…
Project management guidelines - November 2013
37
Quality plan
Quality target
[Identify the deliverables to be produced by the project, as well as the quality criteria that each deliverable is to achieve.]
Deliverable Quality criteria
Risk management plan
[This plan identifies the foreseeable risks, assesses their likelihood and impact, and classifies them according to the method proposed below, to provide mitigation measures for risks that will be supported.]
Priority
[Use the following table to assign the likelihood and impact scores for each risk.]
1 2 3 4 5
Very Low Low Medium High Very High
[The priority ratio is the Likelihood score times the Impact score.]
Risk ID Description Likelihood score
Impact score
Priority ratio Rating
R01 3 4 12 2
R02 4 5 20 1
R03 2 4 8 3
R04 2 2 4 4
Risk Schedule
[After analysis of all risks, it may be necessary to accept certain risks for which the ratio is low. For risks that are supported, the project manager should use the following table to identify the preventive actions required to mitigate the level of risk to the project.]
Risk rating Risk ID / description Preventative actions Resource Action date
1 R02
2 R01
Project management guidelines - November 2013
38
Communication plan
[The project manager must plan specific activities to carry out effective communication, including the following:
• Define the list of stakeholders who should be informed about the progress of the project;
• Identify the type of information to be transmitted to each group of stakeholders;
• Identify methods of communication to be used;
• Build a communication plan as proposed below.]
COMMUNICATIONS ACTIVITIES
Activity ID
Information (what)
Stakeholders (who)
Timeframes (when)
Methods (how)
C01 Kick of scope / outputs / Results / planning / project management team / etc.
Stakeholder representatives
To start project Meeting ppt presentation
C02 Progress report Steering committee First week after the quarter
Meeting + document (to send 5 days before meeting)
40
Project management guidelines - November 2013
A.5
Mee
ting
min
utes
tem
plat
e
St
art
End
Loca
tion
Date
: -- /
-- /
----
HH:M
M
HH:M
M
xxxx
Nex
t Mee
ting:
: --
/ -- /
----
HH:M
M
HH:M
M
xxxx
Prep
ared
by:
XXX
Min
utes
pre
pare
d on
: -- /
-- /
----
Dead
line
for v
alid
atio
n: -
- / --
/ ---
-, HH
:MM
Mai
ling
List
:
N
ame
En
tity
Trig
ram
E-
mai
l Pa
rtic
ipat
ion
For i
nfo
Appr
oval
XXX
41
Project management guidelines - November 2013
N°
Subj
ect
Mat
ters
dis
cuss
ed
Actio
n
Resp
onsi
ble(
s)
Dead
line
1
2
3
4
5
6
Project management guidelines - November 2013
42
A.6 Risk monitoring form
RISK MONITORING FORM
Project number Title
Risk ID* Project manager
*Unique identifier for the risk in the “risk register”
Risk details
Risk description
[Description of the identified risk and the consequences it will have on the project, in terms of time, budget and quality.]
Risk likelihood
[Describe the likelihood of risk on the project and estimate the level, i.e. 1-very low to 5-very high.]
Risk impact
[Describe the impact of risk on the project and estimate the level, i.e. 1-very low to 5-very high.]
Risk mitigation
Recommended preventative actions
[Describe briefly the actions to be taken to prevent the risk from materializing.]
Recommended contingent actions
[Describe briefly the actions to be taken if the risk materializes, to minimize its impact on the project.]
Prepared by Date
Signature
Project management guidelines - November 2013
43
A.7 Change request form
CHANGE REQUEST FORM
Project Number Title
Change ID* Project manager
*Unique identifier for the Change in the “change register”
Change details
Change Urgency [Level of urgency for undertaking the change. (i.e., 1 - Not urgent, to 5 - Very urgent)]
Change Description [Provide a complete description of the requested change.]
Change Drivers [List the factors that justify this change]
Change Benefits [Define the benefits for the project after implementing this change.]
Change Costs [Describe the costs associated with implementing this change].
Impact details
Project Impact [Describe the impact on the project if this change is / is not implemented.]
Approval details
Supporting documentation
[Any documentation to support this change should be attached to this document.]
Submitted by Approved by
Name/Title Name/Title
Signature
Signature
Date Date
Project management guidelines - November 2013
44
A.8 Project progress report template
PROJECT PROGRESS REPORT
Period from --/--/---- to --/--/----
Project Number Project manager
Project Title
Start Date --/--/---- End Date --/--/---- Initial Budget (XXX)
Available Budget (XXX)
Brief Description
Prepared by Date
Approved by Regional Director or Chief of Department
Date --/--/----
Expected results
Result Key Performance Indicators Target % of achievement
1 1.a [ enter indicator]
1.b [ enter indicator]
2 2.a [ enter indicator]
2.b [ enter indicator]
3 3.a [ enter indicator]
3.b [ enter indicator]
Project management guidelines - November 2013
45
Project activities
Result Activity description Status
(*) Expected deadline Explanations for deviations from work plan
1 1.1 [ enter activity ]
1.2 [ enter activity ]
1.3 [ enter activity ]
…
2 2.1 [ enter activity ]
2.2 [ enter activity ]
2.3 [ enter activity ]
…
3 3.1 [ enter activity ]
3.2 [ enter activity ]
3.3 [ enter activity ]
…
(*) N = Not initiated / O = Ongoing / C = Completed
Financial status
Main Questions Response Explanations
Project cash contributions received as planned? (Y/N/Not applicable)
The level of expenditure is at the expected level? Percentage (%)
Any funds remaining unused? Amount
* Quarterly Financial Situation attached.
Project management guidelines - November 2013
46
Risk management
Risk Description Likelihood Impact Mitigation action achieved
New Risk Detected Likelihood Impact Mitigation action planned
Key challenges
Challenge Action taken
Proposals
Proposal Description
Additional comments
Project management guidelines - November 2013
47
A.9 Assessment / feedback report template
PROJECT ASSESSMENT / FEEDBACK REPORT
Period from --/--/---- to --/--/----
Project number Project manager
Project title
Start date --/--/---- End date --/--/---- Initial Budget (XXX)
Available Budget(XXX)
Brief description
Name of assessing PRJ staff
Date
Reviewed by Head, PRJ Division
Date
1. Challenges/issues
2. Risks
Project management guidelines - November 2013
48
3. Recommended actions
4. Recommendation to Regional Director/Chief of Department
Chief PKM Department
Date
Project management guidelines - November 2013
49
A.10 Closure report template
PROJECT CLOSURE REPORT
Project number Project manager
Project title
Brief description
Partners
Prepared by Date
1. Objectives achievement
Objective Description KPI Initial target Achieved Remarks
2. Results achievement
Result Description KPI Initial target Achieved Remarks
1 a
b
2 a
b
Project management guidelines - November 2013
50
3. Project activities
Result Activity description Initial end date
Carried out in accordance with the work plan? (Y/N)
Explanations for deviations from work plan
1 1.1 [ enter activity ]
1.2 [ enter activity ]
1.3 [ enter activity ]
…
2 2.1 [ enter activity ]
2.2 [ enter activity ]
2.3 [ enter activity ]
…
3 3.1 [ enter activity ]
3.2 [ enter activity ]
3.3 [ enter activity ]
…
4. Financial Status
Main Questions Response Explanations
Project cash contributions received as planned? (Y/N/Not applicable)
The level of expenditure is at the expected level? Percentage (%)
Any funds remaining unused? Amount
NB: Financial Situation (FinSit) should be attached.
Project management guidelines - November 2013
51
5. Lessons learned
Description Recommendation
6. Attached documents
No. Title
7. Decision
[Partner] and ITU agree to close this project. ITU will submit the final financial situation of the project.
The project balance, which will be reflected in the final financial situation, will be: Transferred to other BDT projects ………………… Reimbursed to:
Account Number: Account Name: Bank: SWIFT Code:
For the Signature Date Name/Title
__ / __ / ___
__ / __ / ___
Project management guidelines - November 2013
52
Closure file / check list
# Document Y/N Comment
1 Final project report
2 Photos (if available)
3 Transfer of title to equipment
4 End of contract staff
5 Financial situation a date
6 Closure report
7 Decision on the remaining funds
8 Explanation of the use of budget
9 Post implementation review
Project management guidelines - November 2013
53
A.11 Transfer of title to equipment form
General instructions: As a general rule, transfer of title and ownership of assets under a project should occur at the following times:
• Tangible assets: Transfer of title and ownership of tangible assets (such as hardware and equipment) should be affected immediately following the delivery to the beneficiary of such tangible assets.
• Intangible assets: Transfer of title and ownership of intangible assets (such as software and other intellectual property) should be affected only after the following two (2) conditions have been satisfied:
(1) The acceptance of such intangible assets by the beneficiary (which acceptance should occur if there are no major errors/defects in respect of the use, functioning and operation of such intangible assets, even if there are one or more minor errors/defects); and
(2) The payment in full of the licenses or other rights of use or ownership in respect of such intangible assets.
• The foregoing general instructions/rules should nevertheless be reviewed and, if necessary, adjusted on a case-by-case basis depending on the specifics of each project.]
TRANSFER OF TITLE TO EQUIPMENT
Project number Project manager
Project title
Brief description of the project
Description of agreement(s) under which project document was signed
[Include the full title, date and names of parties to the umbrella agreements under which the Project Document for the relevant Project was entered into—e.g., Cooperation Agreements, Memoranda of Understanding, Voluntary Contribution Agreements, etc.] (hereinafter collectively referred to as the “agreement(s)”)
Name of U.N. Specialized Agency
International Telecommunication Union (hereinafter referred to as “ITU”)
Name of project beneficiary
(hereinafter referred to as “beneficiary”)
Name(s) of other project partners (if different from project beneficiary)
(hereinafter collectively referred to as “partner(s)”)
Prepared by
Date
1 In accordance with the project document for the above referenced project, the question of transferring title to equipment (as defined below) from the International Telecommunication Union (ITU) to the beneficiary has been considered, and agreement has been reached that such title should be transferred subject to and in accordance with (i) the terms and conditions of the original agreement(s) signed with the beneficiary - and donors, project partners, stakeholders if any - or in subsequent approved project extensions; (ii) the project document; and (iii) this transfer of title to equipment form (hereinafter this Form).
Project management guidelines - November 2013
54
2 For the purposes of this Form, the term “equipment” means all hardware, software, materials, tools, furniture, machinery, inventory and/or equipment, as the case may be, which is expressly set out in the list of equipment to be transferred (attached as appendix to this Form, and which is an integral part of this Form), and which was acquired and made available to the project through funds contributed to ITU pursuant to the agreement(s) and the project document.
3 By this Form, ITU hereby transfers and assigns to the beneficiary any and all of ITU rights, titles, interests, duties, liabilities and obligations in, to and under all of the equipment.
4 By this Form, the beneficiary hereby accepts and assumes all of ITU rights, titles, interests, duties, liabilities and obligations in, to and under the equipment, and undertakes to ensure the proper operation and maintenance of the equipment, and vouches and agrees that the equipment will be used solely for the purposes set out in the project document.
5 The beneficiary will indemnify, defend and hold harmless ITU and its officials, employees, contractors, agents and other representatives from and against any actions, claims, demands, proceedings, damages, losses, liabilities, obligations, fees, costs and expenses (including, without limitation, reasonable attorneys’ fees) arising from or relating to the equipment or its use or operation.
6 The donors, project partners, stakeholders if any, join in this Form for the purpose of evidencing in writing their respective acknowledgment and agreement to the assignment by ITU, and assumption by the beneficiary, of the equipment as contemplated under this Form.
7 This Form, together with its appendix (which is an integral part of this Form), will be effective upon its signature by all of the parties hereto and, upon such effectiveness, will form an integral part of the agreement(s). Accordingly, this Form will be subject to and construed in accordance with the terms and conditions—including, without limitation, those relating to settlement of disputes, governing law, and privileges, immunities and facilities of ITU—which are set forth in the agreement(s) and the project document.
8 This Form, and the assignment and assumption contemplated hereunder, will be binding upon and inure to the benefit of each of the parties hereto and their respective successors and permitted assigns.
For the Signature Date Name/Title
ITU
__ / __ / ___
Director Telecommunication Development Bureau
[Beneficiary name]
__ / __ / ___
[Name and title of authorized representative of beneficiary]
[Name(s) of other partner(s), if any]
__ / __ / ___
[Name(s) and title(s) of authorized representative(s) of other partners, if any]
Project management guidelines - November 2013
55
APPENDIX TO TRANSFER OF TITLE TO EQUIPMENT FORM
Project number Project title
List of equipment to be transferred
Item Description Quantity Order No. Supplier
For the Signature Date Name/title
ITU
__ / __ / ___
Project manager
__ / __ / ___
Project management guidelines - November 2013
56
A.12 Post implementation review template
POST IMPLEMENTATION REVIEW
Project number Project manager
Project title
Brief description
Partners
Prepared by Date
1. Executive summary
[Describe the following key information for decision making: • Scope of evaluation. • Key findings. • Conclusions. • Recommendations.]
2. Scope of review
[This paragraph should provide a clear explanation of the scope of the review.]
3. Results achievement
Result Description KPI Initial target Achieved Remarks
1 a
b
2 a
b
Project management guidelines - November 2013
57
4. Financial status
Main questions (Y/N/Not applicable) Percentage (%) Explanations
Project cash contributions received as planned?
Is the level of expenditure at the expected level?
Any funds remaining unused?
5. Findings
[The findings of the evaluation should address the following in response to the key questions of the evaluation: • cost efficiency and relevance; • external factors influencing progress towards the outcome; • ITU contribution to capacity development and infrastructure building.]
6. Lessons learned
[The lessons learned should be analysed, and this section should specify answers to the following questions: • Which lessons learned were distilled from the evaluation of the project? • Could these lessons be utilized as best practices in other projects or regions?]
7. Conclusions
[From the findings during the evaluation, this section should highlight the key conclusions that represent an added value to the objective of evaluation.]
8. Recommendations
[Make clear recommendations that can be implemented: • Each recommendation must be from a previously completed evaluation. • Priorities will be identified for the implementation of recommendations.]
9. Attached documents
Number Title
Project management guidelines - November 2013
58
A.13 Impact analysis report template
IMPACT ANALYSIS REPORT
Project Number Project manager
Project Title
Brief Description
Partners
Prepared by Date
1. Executive summary
[Describe the key information for decision making: • Scope covered. • Key findings. • Recommendations.]
2. Scope of impact analysis
[Describe clearly the scope and the purpose of the impact analysis.]
3. Impacts achievement
Impact Description KPI Initial target Achieved Remarks
1
2
4. Sustainability
Main questions Initial target Achieved Explanations
Turnover
Staff costs
Maintenance of equipment
Supplies
Project management guidelines - November 2013
59
5. Findings
[Define the findings of the impact analysis ]
6. Lessons learned
[The lessons learned should be analysed and should specify answers to the following questions: • Which lessons learned were distilled from the impact analysis of the project? • Could these lessons be utilized as best practices in other projects or regions?]
7. Recommendations
[Make clear recommendations that can be implemented: • Each recommendation must be from a previous evaluation • Priorities will be identified for the implementation of recommendations]
Project management guidelines - November 2013
60
A.14 Lessons learned report template
LESSONS LEARNED REPORT
Project number Project title
Theme
Key words
Prepared by Date
Phase
Formulation
Implementation
Evaluation
Actions that have been successful Recommendations
[Brief description of the lessons learned from actions that have been successful, so these actions can be replicated.]
[Provide a recommendation for each lesson learned in respect successful actions.]
Actions to avoid for other projects Recommendations
[Brief description of the lessons learned from actions that have not been successful, so these actions can be avoided.]
[Suggest possible improvements for each of the lessons learned in respect of actions to be avoided.]
International Telecommunication Union (ITU) Telecommunication Development Bureau (BDT) Office of the Director Place des Nations CH-1211 Geneva 20 – Switzerland Email: [email protected] Tel.: +41 22 730 5035/5435 Fax: +41 22 730 5484
Deputy to the Director and Director,Administration and Operations Coordination Department (DDR)
Infrastructure EnablingEnvironmnent and e-Applications Department (IEE)
Innovation and PartnershipDepartment (IP)
Project Support and Knowledge Management Department (PKM)
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +41 22 730 5784 Tel.: +41 22 730 5421 Tel.: +41 22 730 5900 Tel.: +41 22 730 5447Fax: +41 22 730 5484 Fax: +41 22 730 5484 Fax: +41 22 730 5484 Fax: +41 22 730 5484 Africa
Ethiopia Cameroon Senegal Zimbabwe International Telecommunication Union (ITU) Regional Office P.O. Box 60 005 Gambia Rd., Leghar ETC Building 3rd floor Addis Ababa – Ethiopia
Union internationale des télécommunications (UIT) Bureau de zone Immeuble CAMPOST, 3e étage Boulevard du 20 mai Boîte postale 11017 Yaoundé – Cameroon
Union internationale des télécommunications (UIT)Bureau de zone 19, Rue Parchappe x Amadou Assane Ndoye Immeuble Fayçal, 4e étage B.P. 50202 Dakar RP Dakar – Senegal
International TelecommunicationUnion (ITU) Area Office TelOne Centre for Learning Corner Samora Machel and Hampton Road P.O. Box BE 792 Belvedere Harare – Zimbabwe
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected] Tel.: +251 11 551 4977 Tel.: + 237 22 22 9292 Tel.: +221 33 849 7720 Tel.: +263 4 77 5939Tel.: +251 11 551 4855 Tel.: + 237 22 22 9291 Fax: +221 33 822 8013 Tel.: +263 4 77 5941Tel.: +251 11 551 8328 Fax: + 237 22 22 9297 Fax: +263 4 77 1257Fax: +251 11 551 7299 Americas
Brazil Barbados Chile Honduras União Internacional de Telecomunicações (UIT) Regional Office SAUS Quadra 06, Bloco “E” 11º andar, Ala Sul Ed. Luis Eduardo Magalhães (Anatel) 70070-940 Brasilia, DF – Brazil
International TelecommunicationUnion (ITU) Area Office United Nations House Marine Gardens Hastings, Christ Church P.O. Box 1047 Bridgetown – Barbados
Unión Internacional deTelecomunicaciones (UIT) Oficina de Representación de Área Merced 753, Piso 4 Casilla 50484, Plaza de Armas Santiago de Chile – Chile
Unión Internacional deTelecomunicaciones (UIT) Oficina de Representación de Área Colonia Palmira, Avenida Brasil Ed. COMTELCA/UIT, 4.º piso P.O. Box 976 Tegucigalpa – Honduras
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +55 61 2312 2730-1 Tel.: +1 246 431 0343/4 Tel.: +56 2 632 6134/6147 Tel.: +504 22 201 074Tel.: +55 61 2312 2733-5 Fax: +1 246 437 7403 Fax: +56 2 632 6154 Fax: +504 22 201 075Fax: +55 61 2312 2738 Arab States Asia and the Pacific CIS countries Egypt Thailand Indonesia Russian FederationInternational Telecommunication Union (ITU) Regional Office Smart Village, Building B 147, 3rd floor Km 28 Cairo – Alexandria Desert Road Giza Governorate Cairo – Egypt
International TelecommunicationUnion (ITU) Regional Office Thailand Post Training Center, 5th floor, 111 Chaengwattana Road, Laksi Bangkok 10210 – Thailand
Mailing addressP.O. Box 178, Laksi Post Office Laksi, Bangkok 10210 – Thailand
International TelecommunicationUnion (ITU) Area Office Sapta Pesona Building, 13th floor JI. Merdan Merdeka Barat No. 17 Jakarta 10001 – Indonesia
Mailing address: c/o UNDP – P.O. Box 2338 Jakarta 10001 – Indonesia
International Telecommunication Union (ITU) Area Office 4, Building 1 Sergiy Radonezhsky Str. Moscow 105120 Russian Federation
Mailing address: P.O. Box 25 – Moscow 105120 Russian Federation
Email: [email protected] Email: [email protected] Email: [email protected] Email: [email protected].: +202 3537 1777 Tel.: +66 2 575 0055 Tel.: +62 21 381 3572 Tel.: +7 495 926 6070Fax: +202 3537 1888 Fax: +66 2 575 3507 Tel.: +62 21 380 2322 Fax: +7 495 926 6073 Tel.: +62 21 380 2324 Fax: +62 21 389 05521
EuropeSwitzerland International Telecommunication Union (ITU) Telecommunication Development Bureau (BDT)Europe Unit (EUR) Place des Nations CH-1211 Geneva 20 – Switzerland Switzerland
Email: [email protected] Tel.: +41 22 730 5111
11
/20
13
p r o j e c t m a n a g e m e n tg u i d e l i n e s
N O V E M B E R 2 0 1 3T e l e c o m m u n i c a t i o n D e v e l o p m e n t S e c t o r
Printed in SwitzerlandGeneva, 2013
International Telecommunication Union
Telecommunication Development Bureau
Place des Nations
CH-1211 Geneva 20
Switzerland
www.itu.int
pr
oje
ct
ma
na
ge
me
nt
gu
ide
lin
es
n
oV
em
Be
r 2
01
3