of 99
JCM INDUSTRIES, INC. P. O. Box 1220 - Nash, Texas 75569-1220
Toll Free 800-527-8482, Fax Toll Free 800-874-9524 Outside U.S. 903-832-2581, Fax 903-838-6260
www.jcmindustries.com
JCM
February 11, 2013 To Our Valued JCM Customer, Enclosed is the new JCM Industries March 4, 2013 Price List. This new price list cancels all previous prices and customers should apply normal discounts without any manual increase. Any quotations or existing price contracts in effect on March 4, 2013 will be honored until their expiration date. JCM holds the current Freight Allowance which remains at $2,000.00 net order.
This increase is generally 4% with varying increases on certain product lines including Optimum Range Couplings, Large Diameter Steel Couplings, Gas Repair Clamps, Fabricated Bell Joint Leak Clamps and Tools. This adjustment is in response to the rising costs of raw materials, labor and the economic factors affecting U.S. manufacturers. A product upgrade featured in this book is the JCM Carbon Steel Fabricated Tapping Sleeves alloy bolts & nuts furnished with fabricated tapping sleeves will be standard Epoxy Coated, Powercron 590-534. New products featured in the book are the JCM 630 and 631 Fitting and Joint Restrainers for Asbestos Cement Pipe. JCM continues to provide top quality products with prompt service. We appreciate your partnership in business and should you require any assistance, contact the JCM Sales Team at 1-800-527-8482 or 903-832-2581. Best regards, John Collins John Collins Vice President of Sales JCM Industries Inc. Note:
Included in this package are two additional pages titled: Outlet Seal Tapping Sleeves for HDPE Pipe and Threaded Outlet Tapping Sleeves for HDPE Pipe - JCM has designated specific catalog part numbers for tapping sleeves and threaded outlet tapping sleeves for High Density Polyethylene Pipe 14 nominal size and larger. These specific part number/ranges ensure the proper fit of fabricated sleeves for use on HDPE. These two sheets may be inserted in a location most convenient for your use.
GENERAL DISTRIBUTOR DISCOUNT SHEET
JCM Industries, Inc.PRICE LIST Effective March 4, 2013
Discounts are applicable to JCM Pipe Fittings and FabricationsPrice List Effective March 4, 2013
Cancels all previous prices
List Prices Discount
0 - $1,000.00 30%
$1,001.00 - $10,000.00 45%
$10,001.00 and above 53%
Freight Allowance: $2,000.00 Net Order of Products with Prices Listed 03/04/2013
JCM INDUSTRIES, INC.P.O. Box 1220 Nash, Texas 75569-1220
Call Toll Free 800-527-8482, Fax Toll Free 800-874-9524Outside U.S. Call 903-832-2581, Outside U.S. Fax 903-838-6260
www.jcmindustries.com
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM Outlet Seal Tapping Sleeves for HDPE PipeModel Numbers 412, 419, 452, 464, 459, 465
Ranges and Part Numbers provided specifically for High Density Polyethylene PipeFor list price, refer to JCM Model Price Page (same Nominal Pipe Size/Outlet Size),
JCM Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change.For sizes not listed, contact JCM Inside Sales Team at 800-527-8482 or 903-832-2581.
NOM. PIPESIZE(IN.)
SLEEVE O.D. RANGE
(IN.)
SLEEVE NUMBERX
ANY OUTLET
OUTLETSIZES
AVAILABLE
14 13.60 - 14.0914.99 - 15.4913921520
X 2X 3X 4X 6X 8
X 10X 12
16 15.68 - 16.1817.05 - 17.5515901730
X 2X 3X 4X 6X 8
X 10X 12
18 17.64 - 18.1419.11 - 19.6117901940
X 2X 3X 4X 6X 8
X 10X 12
20 19.60 - 20.1021.17 - 21.6719902150
X 2X 3X 4X 6X 8
X 10X 12
2122
20.60 - 21.1021.60 - 22.10
20902190
X 2X 3X 4X 6X 8
X 10X 12
24 23.46 - 24.1625.30 - 25.8024002570
X 2X 3X 4X 6X 8
X 10X 12
27 26.50 - 27.00 2690
X 2X 3X 4X 6X 8
X 10X 12
30 29.50 - 30.0031.50 - 32.0029903190
X 2X 3X 4X 6X 8
X 10X 12
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM Outlet Seal Tapping Sleeves for HDPE PipeModel Numbers 412, 419, 452, 454, 459, 465
Ranges and Part Numbers provided specifically for High Density Polyethylene Pipe.For other types of pipe see JCM General Products Directory
How to Order:1. Determine outside diameter of HDPE Pipe (IPS, DI), provide SDR#.2. Select sleeve material (carbon, stainless) and proper outlet material & type (flange, mechanical joint).3. Select model number. For full product description, see JCM Catalog.4. Select proper sleeve O.D. Range and sleeve number.5. Specify Model Number-Sleeve Number x Outlet Size.
Example: For 24 HDPE SDR 17 IPS O.D. pipe, with 8 flanged outlet, carbon steel, order: 412-2400 x 8Example: For 24 HDPE SDR 17 IPS O.D. Pipe, with 8 mechanical joint outlet, All Stainless Steel, order: 459-2400 x 8
For list price, refer to JCM Model Price Page (same Nominal Pipe Size/Outlet Size),JCM Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change.
For sizes not listed, contact JCM Inside Sales Team at 800-527-8482 or 903-832-2581.
NOM. PIPESIZE(IN.)
SLEEVE O.D. RANGE
(IN.)
SLEEVE NUMBERX
ANY OUTLET
OUTLET SIZESAVAILABLE
36 35.50 - 36.0037.80 - 38.3035903820
X 2X 3X 4X 6X 8
X 10X 12
42 41.50 - 42.0044.00 - 44.5041904440
X 2X 3X 4X 6X 8
X 10X 12
48 47.50 - 48.0050.30 - 50.8047905070
X 2X 3X 4X 6X 8
X 10X 12
54 53.50 - 54.0057.06 - 57.5653905746
X 2X 3X 4X 6X 8
X 10X 12
60 59.50 - 60.0061.11 - 61.6159906151
X 2X 3X 4X 6X 8
X 10X 12
2 Mechanical Joint Outlets Not Available14 and Larger Flanged Outlets Available. Tapping valve information must be specified to assure proper alignment recess dimension.14 & 16 Mechanical Joint Outlets Available. Stainless Steel Only (Model 459)For size on size outlets a 1/2 undersize shell cutter is required.JCM Flanged and Mechnical Joint Outlet Tapping Sleeves furnished with test plugs unless otherwise specified.
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM Outlet Seal Threaded Outlet Tapping Sleeves for HDPE PipeModel Numbers 418, 438
Ranges and Part Numbers provided specifically for High Density Polyethylene Pipe.
How to Order:1. Determine outside diameter of HDPE Pipe (IPS, DI), provide SDR#.2. Select sleeve material (carbon, stainless) and proper size outlet.3. Select model number (418, 438). For full product description see JCM Catalog.4. Select proper sleeve O.D. Range and sleeve number.5. Specify Model Number-Sleeve Number x Outlet Size
Example: For 24 HDPE SDR 17 IPS O.D. pipe, with 2 threaded outlet, carbon steel, order: 418-2400 x 14IPExample: For 24 HDPE SDR 17 IPS O.D. Pipe, with 2 threaded outlet, All Stainless Steel, order: 438-2400 x 14IP
For list price, refer to JCM Model Price Page (same Nominal Pipe Size/Outlet Size),JCM Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change.
For sizes not listed, contact JCM Inside Sales Team at 800-527-8482 or 903-832-2581.
NOM. PIPESIZE(IN.)
SLEEVE O.D. RANGE
(IN.)
SLEEVE NUMBERX
ANY OUTLETOUTLET
SIZE
ORDERCODE
IP
14 13.60 - 14.0914.99 - 15.4913921520
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
06
08
10
12
14
16
17
18
16 15.68 - 16.1817.05 - 17.5515901730
18 17.64 - 18.1419.11 - 19.6117901940
20 19.60 - 20.1021.17 - 21.6719902150
2122
20.60 - 21.1021.60 - 22.10
20902190
24 23.46 - 24.1625.30 - 25.8024002570
27 26.50 - 27.00 2690
30 29.50 - 30.0031.50 - 32.0029903190
36 35.50 - 36.0037.80 - 38.3035903820
42 41.50 - 42.0044.00 - 44.5041904440
48 47.50 - 48.0050.30 - 50.8047905070
54 53.50 - 54.0057.06 - 57.5653905746
60 59.50 - 60.0061.11 - 61.6159906151
PRICE LIST EFFECTIVEMarch 4, 2013
Cancels All Previous PricesPrices Subject to Change Without Notice
JCM INDUSTRIES, INC.P. O. BOX 1220
NASH, TEXAS 75569-1220www.jcmindustries.com
E-Mail: [email protected]
CONTACT JCM:Toll Free (800) 527-8482
Fax Toll Free (800) 874-9524Outside U.S. Call (903) 832-2581Fax Outside U.S. (903) 838-6260
JCMJCMINDUSTRIES
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
(1) GENERALAll orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customerorder in the event of contradiction or inconsistency. Prices, terms and conditions published by JCM Industries, Inc. are subject to change without notice.
(2) TERMS OF PAYMENTMinimum net billing is fifty U. S. dollars ($50.00) on all orders. To encourage early payment a one percent (1%) Cash Discount will be allowed on all invoices paid not laterthan fifteen (15) days from invoice date. Payment of full invoice amount is due within thirty (30) days from invoice date. Past due accounts are subject to the maximumlegal rate of interest. Payment is to be in U.S. dollars.
(3) TAXAll sales, use or other taxes imposed on any transaction between JCM Industries, Inc. and the Buyer shall be paid in full by Buyer. Such taxes will be added to the amountshown payable on the invoice.
(4) BIDS AND QUOTATIONSSpecific bids and quotations will be honored for thirty (30) days from written quotation unless otherwise specified therein. Buyer may with the express written consent ofJCM Industries, Inc. make changes in the specifications for material or work covered by the contract. In such event the contract price and delivery dates shall be equitablyadjusted. JCM Industries, Inc. shall be entitled to payment for reasonable costs and expenses incurred by it for works and materials rendered unnecessary as a result ofsuch changes and for works and materials required to effect said changes, plus JCM Industries, Inc. usual profit thereon.
(5) FREIGHT, SHIPMENT AND TITLEAll sales are made F.O.B. JCM Industries, Inc. shipping point. JCM Industries, Inc. shall have the right to select the carrier and route of shipment. Title for products shippedby JCM Industries, Inc. passes to Buyer upon delivery to the carrier.
(6) INSPECTION AND CLAIMSAll products and parts shall be finally inspected and accepted within ten (10) days after receipt. All claims whatsoever by Buyer (including claims for shortages) exceptingonly those provided for under the Warranty and Limitation of Liability clauses hereof must be made within said ten (10) day period or they are waived. Title and risk of lossor damage to products shipped by JCM Industries, Inc. passes to the Buyer upon delivery to the carrier. JCM Industries, Inc. will not file claims against carriers for Buyerbut will render reasonable assistance to Buyer in filing any such claim.
(7) RETURNS AND CANCELLATIONSReturns will be accepted only with prior written authorization by JCM Industries, Inc. All returns made without prior written authorization will be refused or returned to theshipper at his expense. Authorized returns are subject to a fifty percent (50%) or a minimum twenty-five dollars ($25.00) handling charge. No credit will be allowed forproducts which cannot be made resalable, products manufactured to Buyers specifications nor any obsolete products. Any returned material requiring reconditioning willbe subject to charges equal to those necessary to make the products resalable. Material or work which remains to be furnished may be cancelled by Buyer only with theexpress written consent of JCM Industries, Inc. In the event of such cancellation, JCM Industries, Inc. shall be entitled to payment for the cost and expenses incurred by itin connection with the material or work so cancelled, plus an amount determined by applying JCM Industries, Inc. usual rate of profit for similar items to such costs andexpenses, or fifteen percent (15%) of the contract price.
(8) WARRANTY - LIMITATION OF LIABILITY - EXCLUSION OF WARRANTIESAll products manufactured by JCM Industries, Inc. are carefully inspected prior to shipment. Each product is warranted against defects in materials and workmanship. Inthe event a product is found to be defective in materials or workmanship the Buyers exclusive remedy under this warranty is expressly limited to replacement, repair orrepayment of the purchase price at the option of JCM Industries, Inc. The net invoiced price is the limit of liability. No claims or any consequential or special damages willbe allowed. Any defective parts of products must be held for inspection by JCM Industries, Inc. and returned to JCM Industries, Inc. Nash, Texas, promptly upon request.THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE, AND ARE IN LIEU OF ALL OTHER WARRANTIES (WHETHER WRITTEN, ORAL OR IMPLIED)INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ALL CLAIMS FOR BREACH OF WARRANTYSHALL BE PRESENTED TO SELLER WITHIN THIRTY (30) DAYS AFTER DISCOVERY OF THE DEFECT IN THE GOODS, OR BE BARRED.
(9) DELIVERYDelivery dates indicated in order confirmations are approximate and are based on prompt receipt of all necessary information regarding the products covered by the con-tract. JCM Industries, Inc. will use its best efforts to meet the indicated delivery dates, but cannot be held responsible for its failure to do so due to fire, war, civil commo-tion, strikes, failure of transportation, any act of God, or other causes beyond its control. In the event of any delay in delivery caused by Buyer, JCM Industries, Inc. willstore and handle all items ordered at Buyers risk and will invoice Buyer for the unpaid portion of the contract price, on or after the date on which the products is ready fordelivery. This amount will become due and payable in full within thirty (30) days from invoice date. A monthly storage and extra handling charge of one percent (1%) permonth or any fraction thereof of the contract price covering the stored product shall be billable as a separate item.
(10) PRODUCT IMPROVEMENTProducts produced by JCM Industries, Inc. are engineered to meet service requirements. From time to time products will be improved at the discretion of JCM Industries,Inc. When this occurs, previous designs will not be replaced in the field unless they have been proven defective.
(11) CONTRAVENING LAWShould any term or provision contained in the contract contravene or be invalid under applicable law, the contract shall not fail by reason thereof but shall be construed inthe same manner as if such term or provision had not appeared therein.
(12) DEFAULTNotwithstanding anything hereinabove to the contrary, all sums due and owing and not paid within thirty (30) days from invoice date shall bear interest at the rate of eigh-teen (18%) percent per annum from the date incurred until paid. Buyer agrees to pay not only all invoiced amounts, but also interest as provided above and all costs andexpenses of collecting the above, including but not limited to court costs, attorney fees reasonable in relation to the work expended, and expenses and costs related torecovery and protection of the goods sold; all sums payable to JCM Industries, Inc. at its offices in Nash, Bowie County, Texas. To secure the payment of all the abovesums, principal, interest, and expenses and costs, Buyer hereby grants to JCM Industries, Inc., a security interest in all goods sold to Buyer by JCM Industries, Inc., andall proceeds from, products of, accessions to, and documents of title concerning such goods.
(13) GENERALThis Agreement and all sales transactions made pursuant to this Agreement shall be governed by the laws of the State of Texas, and to the extent applicable any federallaws having application within the State of Texas. It is provided that in no event whatsoever shall interest be contracted for, charged, or collected in excess of the maximuminterest allowable by law.
JCM INDUSTRIES, INC. / P. O. BOX 1220 / NASH, TEXAS 75569-1220 / (903) 832-2581 2013 JCM INDUSTRIES, INC.
Terms and Conditions of Sale
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.1
UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGSPage
101 Universal Clamp Coupling - Standard Range ........................... 4102 Universal Clamp Coupling - Extended Range........................... 5108 Universal Clamp Coupling For Sewer Pipe............................. 13131 All Stainless Universal Clamp Coupling - Standard Range ....... 6132 All Stainless Universal Clamp Coupling - Extended Range ...... 7121 Gas Repair Clamp................................................................... 10151 All Stainless Gas Repair Clamp .............................................. 11161 All Stainless Steel Fabricated Lug Clamp ................................. 8162 All Stainless Steel Fabricated Lug Clamp - Extended Rng ....... 9168 - 169 All Stainless Steel Fab Lug Sewer Clamp....................... 12171 UCC Removeable Lug - Standard Range ................................. 4172 UCC Removeable Lug - Extended Range ................................ 5103 - 164 Tapped Outlet Clamps .................................................... 14105 - 135 Collar Leak Clamp .......................................................... 15106 Bell Joint Leak Clamp for PVC Pipe........................................ 16143 Bell Joint Leak Clamp for CI, DI, C-900 .................................. 16110 Patch Clamp............................................................................ 17111 Full Repair Clamps.................................................................. 18112 Heavy Duty Patch Clamp - Single Band ................................. 19113 Heavy Duty Patch Clamp - Multi-Band.................................... 19114 Mechanical Joint Repair Sleeve.............................................. 20116 Repair Sleeve for Concrete Steel Cylinder Pipe ..................... 21
COUPLINGS201 Steel Coupling - IPS PVC & Steel Pipe O.D.-CI, DI O.D..24 - 25202 Long Steel Coupling................................................................ 26203 Steel Transition Coupling ........................................................ 27204 Steel Reducing Coupling......................................................... 27210 Ductile Iron Coupling - CI, DI, C-900/905 PVC & A/C............. 28211 Ductile Iron Coupling - IPS PVC & Steel Pipe O.D. ................ 28212 Ductile Iron Transition Coupling .............................................. 29214 Pipe End Cap Coupling........................................................... 30215 Long Ductile Iron Couplings.................................................... 31219 Restrained Ductile Iron Coupling ............................................ 30220 Galvanized Compression Coupling Series.............................. 32225 Insulating Adapter Gasket....................................................... 32230 Stiffener Insert for High Density Polyethylene Pipe................. 37241 Standard Length Optimum Coupling ................................34 - 35242 Long Length Optimum Coupling ......................................34 - 35
FLANGED COUPLING ADAPTERS301 Cast Iron (Ductile Iron FCA).............................................40 - 41303 Steel Fabricated FCA - Special ............................................... 42304 Steel Fabricated Reducing FCA.............................................. 43306 Fabricated FCA....................................................................... 44307 Fabricated Reducing FCA....................................................... 45309 Dismantling Joint..................................................................... 46
SERVICE SADDLESPage
401 Single Strap Service Saddle ...................................................49402 Double Strap Service Saddle..................................................51403 Wide Body Service Saddle - SS Strap....................................49404 Service Saddle with Double SS Straps...................................51405 Coated Wide Body Service Saddle - SS Strap .......................50406 Coated Service Saddle with Double SS Straps ......................52407 Coated Single Strap SS - electro-galvanize strap...................50408 Coated Double Strap SS - electro-galvanized straps .............52425 Service Saddle for Concrete Steel Cylinder Pipe ....................53
TAPPING SLEEVES411 Fabricated Tapping Sleeve - Plain End Outlet .........................56412 Fabricated Tapping Sleeve - Flanged Outlet ................... 60 - 61413 Fabricated Tapping Cross........................................................56414 Fabricated Mechanical Joint Tapping Sleeve ..........................75415 Fabricated Tapping Sleeve - Concrete Steel Cylinder Pipe... 76 - 77416 Weld-On Tapping Sleeve - Outlet Only....................................73417 Weld-On Tapping Sleeve .........................................................73418 Fabricated Threaded Outlet Tapping Sleeve ...........................54419 Fabricated Tapping Sleeve with Mechanical Joint Outlet ........64422 Fabricated Tapping Sleeve for PVC Pipe ........................ 62 - 63429 Fab Tap Slv for PVC with Mechanical Joint Outlet ..................65432 All Stainless Steel Tapping Sleeve................................... 66 - 67438 All Stainless Steel Threaded Outlet Tapping Sleeve................55439 Stainless Steel Tapping Slv - Mechanical Joint Outlet ..... 68 - 69440 Line Stop Fitting.......................................................................74452 All Stainless Steel Tapping Sleeve Outlet Seal Gasket.... 70 - 71459 Stainless Steel Tapping Slv - Mechanical Joint Outlet .............72462 Stainless Steel Tapping Sleeve - Carbon Steel Flange.... 66 - 67464 Stainless Steel Tap Slv Outlet Gasket - Carbon Stl Flg ... 70 - 71465 Stainless Steel Tap Slv Outlet Gasket - Carbon MJ Outlet ......72469 Stainless Steel Tap Slv with Carbon Steel MJ Outlet ....... 68 - 69
RESTRAINERS600 Sur-Grip Restrainers........................................................ 79 - 80630 Restrainers for Asbestos Cement Pipe....................................81
PIPE FABRICATIONS, TOOLS & ACCESSORIES801 Expansion Joint - Single End........................................... 84 - 85802 Expansion Joint - Double End ......................................... 84 - 85800 Fabricated Tee, Spools & Wall Fittings ....................................82800 Series Surge Suppressor.........................................................83900 Series Master Wrenches - 901, 902, 903, 904 ........................86900 Master Wrench Set ..................................................................86905 Torque Wrench ........................................................................87906 Hydrant Wrench.......................................................................87910 Deep Well Socket Set..............................................................87920 Pipe Outside Diameter Tape....................................................86
JCM FITTINGS FOR HDPEJCM Products for Polyethylene .......................................................38General Application Information ......................................................90
GENERAL INFORMATIONTerms & Conditions ..................................................................................................................................................................... Inside Front CoverCatalog Number Comparison Guide ............................................................................................................................................................. 88 - 89Pipe O.D. Guide .....................................................................................................................................................................................Back Cover
JCM INDUSTRIES, INC. PRICE CATALOG INDEXMarch 4, 2013
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.2
JCM Selection Guide to Repair Fittings
PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION
101 Universal Clamp Coupling - Standard Range
102 Universal Clamp Coupling - Extended Range
121 Gas Repair Clamp
Most popular and economical clamp provides a fullcircumferential seal and wide range. Sizes 1-1/2 - 12.
This multi-band clamp provides a full circumferential sealand offers extended range, heavy duty design and extrasafety factor in larger sizes. Sizes 4- 60.
This popular and economical clamp provides a fullcircumferential seal permanently repairing cast iron andsteel gas service lines. Sizes 2 - 12.
103 Tapped Universal Clamp Coupling - Standard Range
104 Tapped Universal ClampCoupling - Extended Range
123 Gas Service Clamp
Repair clamps with tapped outlets are recommended forreplacement of pulled out corporation stops and inapplications where pipe reinforcement is necessary.Taps 3/4 - 2.
131 All Stainless Steel Univ. Clamp Coupling - Std. Range
132 All Stainless Steel Univ. Clamp Coupling - Extd. Range
151 All Stainless Gas Repair Clamp
All stainless version of the popular single band clampprovides a full circumferential seal and wide range.Sizes 1-1/2 - 12.
This all stainless multi-band clamp provides a fullcircumferential seal and offers extended range, heavyduty design and extra safety factor in larger sizes.Sizes 4 - 60.
All Stainless Steel construction provides extra corrosionresistance for permanent repair of cast iron and steel gasservice lines. Sizes 2 - 12.
133 All Stainless Tapped Univ. Clamp Cplg. - Standard Range
134 All Stainless Tapped U. C. C. - Extended Range
153 All Stainless Gas Service Clamp
All stainless repair clamps with tapped outlets arerecommended for replacement of pulled out corporationstops and in applications where pipe reinforcement isnecessary. Taps 3/4 - 2.
105 Collar Leak Clamp
135 All Stainless Collar Leak Clamp
This specialty clamp provides a quick, simple means ofrepairing solvent weld PVC pipe joints. Pressure pipesizes 2 - 8. Plastic Irrigation Pipe sizes 4 - 15.
161 All Stainless Steel Fabricated Lug Clamp
162 All Stainless Steel Fab Lug Clamp - Multi Band
163 Tapped All Stainless Steel Fabricated Lug Clamp
All stainless steel fabricated repair clamp provides fullcircumferential seal and wide range. All stainlessconstruction is suitable for hot, acidic or corrosiveenvironments. Sizes 2 - 20.
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
3
JCM Selection Guide to Repair Fittings
171 Universal Clamp Coupling - Removeable Lug - Standard Range
172 Universal Clamp Coupling - Removeable Lug - Extended Range
Universal Clamp Coupling with unique feature ofremoveable lug to accommodate installations inrockbound soils, narrow piping galleries and other limitedspace installation applications. Sizes 1-1/2 - 12.
Multi-band clamp provides full circumferential seal and theremoveable lug feature. Heavy duty design and extrasafety factor in large sizes. Sizes 4 - 60
106 Bell Joint Leak Clamp for IPS PVC
A bell joint repair clamp specifically for rubber joint IPSsize plastic pipe. Clamp also fits solvent weld joints andmany standard steel pipe threaded couplings.Sizes 4 - 8.
143 Bell Joint Leak Clamps for Cast Iron, Ductile Iron,C-900 PVC
.
Bell joint clamps for leaking caulk and rubber joints on castiron, ductile iron and C-900 PVC. Sizes 4 - 36. Largersizes available on request.
108 Universal Clamp Coupling for Sewer Pipe
138 All Stainless Steel Univ. Clamp Cplg. for Sewer Pipe
168 All Stainless Steel Fab Lug for Sewer Pipe
Full circumferential clamp coupling - joins & repairs sewerpipe, single and multi-band. Sizes 4 - 48.
All stainless full circumferential clamp coupling to join andrepair sewer pipe. Sizes 4 - 48.
All stainless fabricated lug clamp for sewer pipe.Sizes 4 - 12. Multi band clamp available.
110 Patch Clamp
111 Full-Repair Clamp
Fast, economical repair clamps to permanently repair pin-holes, punctures or splits in steel pipe. Sizes 1/2 - 12.
Fully gasketed repair clamp. Especially recommended forrepairs to heavily damaged pipe and pipe with reduceddiameter due to corrosion. Steel Sizes 1/2 - 2.
112 Heavy Duty Patch Clamp - Single Band
113 Heavy Duty Patch Clamp - Multi-Band
Heavy duty single band patch clamp for repairingpinholes, punctures or splits. Sizes 1-1/2 - 12.
Heavy duty multi-band clamp offers increasedperformance and range in repairing pinholes, puncturesand splits. Sizes 10 and larger.
114 Mechanical Joint Repair Sleeve
A special repair sleeve for sealing over split or leaking castiron bells, A/C couplings and welded couplings andstraight runs of pipe. Sizes 4 and larger.
116 Repair Sleeve for Concrete Steel Cylinder Pipe
A high pressure, reinforcing repair sleeve for repairingholes, punctures and splits in concrete steel cylinder pipe.Especially recommended for heavily damaged and largersizes of pipe.
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and width.63. Determine Model Number. Model 101 for standard clamp,
171 for Removeable lug system.4. Specify clamp number. Example: To fit Cast Iron
pipe, 6.90 O.D. with 6 width, order: 101-0690-6 or171-0690-6
Clamps do not prevent lateral movement of pipe. Applications in which thepipe may move out of the clamp, proper anchorage of the pipe must beprovided.
Nom.PipeSize
ClampO.D.
Range
101Attached
Lug
171Removeable
Lug
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
1-1/2 1.88 - 2.15 0190$100.30 - 174.20 - - - -
7# 14#
2 - 2-1/2 2.35 - 2.632.70 - 3.1302380275
100.30 105.50 174.20 209.70 - - -
8# 9# 15# 19#
3 3.46 - 3.703.73 - 4.1303500400
126.40 132.90 201.30 251.30 - - -
8# 10# 16# 20#
4
4.45 - 4.754.74 - 5.144.95 - 5.355.22 - 5.62
0450048005000525
130.80 137.80 217.80 263.50 318.30 426.80 557.20
9# 11# 18# 22# 27# 36# 44#
6
5.95 - 6.356.56 - 6.966.85 - 7.257.05 - 7.457.45 - 7.85
06000663069007100745
155.20 163.50 261.60 300.20 390.80 533.20 639.90
10# 12# 19# 24# 29# 38# 48#
8
7.95 - 8.358.54 - 8.948.99 - 9.399.27 - 9.67
9.90 - 10.30
08000863090509401000
182.50 191.90 307.80 351.90 448.40 572.80 715.40
11# 13# 21# 27# 32# 42# 53#
10
10.60 - 11.0011.04 - 11.4411.34 - 11.7411.75 - 12.1512.00 - 12.40
10751110114011751200
- 251.30 393.70 453.90 631.40 818.90 974.20
19# 36# 39# 52# 70# 78#
12
12.60 - 13.0213.10 - 13.5013.40 - 13.8013.70 - 14.1014.00 - 14.40
12751320134013701400
- 285.60 453.60 517.10 712.20 941.70 1,110.80
20# 37# 40# 52# 74# 82#
Number of Bolts 2 2 4 4 6 8 10
JCM 101 Universal Clamp CouplingsJCM 171 Universal Clamp Couplings
JCM 101 Standard Range Universal Clamp Coupling - provides a fullcircumferential seal and wide range for permanently repairing or reconnectingasbestos-cement, cast iron, steel, plastic and other types of pipe.
JCM 171 Removeable Lug Universal Clamp Coupling - provides a removeablelug system to accommodate rockbound soils, crowded underground utilities,restricted, narrow spaced piping galleries and limited excavation applications.
Available Options Upon RequestModels 101-171-102-172 Pipe sizes and ranges not listed Stainless Steel Bolts Conductive Buttons Specialty Gaskets Tapped clamps, see page 14
4
Image reflects 6 widthImage reflects 6 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 102 Extended Range Universal Clamp CouplingsJCM 172 Removeable Lug Extended Range UCCJCM 102 Extended Range UCC - for systems with asbestos-cement and cast iron pipe or oversize pipe.JCM 172 Removeable Lug System Extd. Range UCC - Removeable lug system accommodates rockbound soils,crowded underground utilities, restricted, narrow spaced piping galleries and limited excavation applications.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number. Model 102 or 172 (Removeable Lug).
Example: To fit Cast Iron pipe, 6.90 O.D. with 6 width,order: 102-0690-6 or 172-0690-6
Clamps do not prevent lateral movement of pipe. Applications in which thepipe may move out of the clamp, proper anchorage of the pipe must be provided.
Double Band Clamps
Nom.PipeSize
ClampO.D.
Range
102Attached
Lug
172Removeable
Lug
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
4 4.44 - 5.244.74 - 5.5704500480
$189.00 205.90 321.60 390.10 493.80 609.30 800.4016# 20# 32# 40# 48# 64# 80#
6 6.62 - 7.426.84 - 7.6406630690
220.10 240.70 354.30 452.60 590.50 699.40 918.3016# 20# 32# 40# 48# 64# 80#
8 8.62 - 9.428.99 - 9.7908630905
258.30 271.50 398.90 515.70 662.20 766.50 1,053.1017# 21# 34# 43# 51# 68# 85#
10 10.72 - 11.7211.04 - 12.2410751110
- - 537.70 - 809.50 1,081.70 1,375.9037# 52# 74# 80#
1212.72 - 13.9213.14 - 14.3413.65 - 14.65
127513201365
- - 571.90 - 854.30 1,193.50 1,503.4055# 80# 106# 132#
14 15.20 - 16.20 1530- - 796.30 - 1,289.00 1,695.20 2,326.60
58# 87# 106# 145#
14 - 16 16.00 - 17.0017.20 - 18.2016001740
- - 841.90 - 1,341.10 1,884.30 2,476.2059# 89# 108# 148#
16 - 18 18.40 - 19.40 1846- - 873.40 - 1,387.30 1,984.40 2,576.00
62# 95# 124# 158#
18 - 20 19.40 - 20.4020.40 - 21.4019502050
- - 888.30 - 1,440.50 2,361.90 2,621.3063# 95# 126# 158#
20 - 22 21.40 - 22.4022.50 - 23.6021602260
- - 940.60 - 1,532.60 2,507.50 2,774.7067# 100# 134# 168#
Number of Bolts 4 4 8 8 12 16 20
Multi-Band Clamps
2423.80 - 25.0025.50 - 26.7027.90 - 29.10
240025802800
- - 1,515.10 - 2,190.00 3,667.80 4,443.3093# 140# 186# 233#
24 - 30 29.80 - 31.0031.70 - 32.9030003200
- - 1,831.60 - 2,706.90 3,854.30 5,058.8098# 147# 196# 245#
36 37.85 - 39.20 3830- - 2,006.20 - 3,013.30 4,328.70 5,720.20
117# 175# 234# 292#
5
Image reflects 12 width
Available Options Upon RequestModels 101-171-102-172 Pipe sizes and ranges not listed Stainless Steel Bolts Conductive Buttons Specialty Gaskets Tapped clamps, see page 14
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 131 All Stainless Steel Clamp Coupling with larger bolts and heavier lug - especiallyfor piping systems that are exposed to hot soils or corrosive environments. JCM All StainlessClamps provide the corrosion resistance of stainless to this means of repairing and connectingpipe.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number. Example: To fit Cast Iron pipe, 6.90 O.D. with 6 width, order:
131-0690-6
Clamps do not prevent lateral movement of pipe. Applications in which the pipemay move out of the clamp, proper anchorage of the pipe must be provided.
Nom.PipeSize
ClampO.D.
Range
131 Stainless SteelUniversal Clamp
Coupling
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
1-1/2 1.88 - 2.15 0190$146.70 - 231.40 - - - -
5# 10#
2 - 2-1/2 2.35 - 2.632.70 - 3.1302380275
146.70 155.90 238.20 286.60 - - -
5# 6# 10# 12#
3 3.46 - 3.703.73 - 4.1303500400
169.80 190.20 288.50 341.10 - - -
6# 7# 11# 13#
4
4.45 - 4.754.74 - 5.144.95 - 5.355.22 - 5.62
0450048005000525
199.00 209.50 341.60 374.80 518.90 658.20 891.80
6# 7# 12# 14# 18# 24# 28#
6
5.95 - 6.356.56 - 6.966.85 - 7.257.05 - 7.457.45 - 7.85
06000663069007100745
233.90 243.30 401.60 443.80 615.70 774.00 998.30
7# 8# 13# 16# 21# 26# 31#
8
7.95 - 8.358.54 - 8.948.99 - 9.399.27 - 9.67
9.90 - 10.30
08000863090509401000
268.80 279.80 456.10 528.30 692.40 861.60 1,102.00
8# 9# 15# 19# 24# 30# 38#
8 - 10
10.60 - 11.0011.04 - 11.4411.34 - 11.7411.75 - 12.1512.00 - 12.40
10751110114011751200
- 363.50 634.60 653.60 946.40 1,203.40 1,425.50
15# 26# 31# 39# 42# 60#
12
12.60 - 13.0213.10 - 13.5013.40 - 13.8013.70 - 14.1014.00 - 14.40
12751320134013701400
- 408.30 705.70 750.70 1,031.20 1,352.10 1,633.70
17# 28# 34# 42# 56# 68#
Number of Bolts 2 2 4 4 6 8 10
JCM 131 All Stainless Steel Universal Clamp Couplings
Available Options Upon RequestModels 131-132 Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14
6
Image reflects 6 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 132 All Stainless Steel Extended RangeUniversal Clamp CouplingsJCM 132 All Stainless Steel Extd. Range Clamp Coupling - for systems in hot soils orcorrosive environments. Provides extra corrosion resistance of all stainless steel.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number. Model 102 or 172.
Example: To fit Cast Iron pipe, 6.90 O.D. with 6 width, order: 132-0690-6Clamps do not prevent lateral movement of pipe. Applicationsin which the pipe may move out of the clamp, properanchorage of the pipe must be provided.
Double Band Clamps
Nom.PipeSize
ClampO.D.
Range
132 Stainless SteelExtended Range
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
4 4.44 - 5.244.74 - 5.5704500480
$300.20 320.20 526.10 612.60 803.20 1,052.10 1,310.409# 11# 16# 20# 25# 32# 44#
6 6.62 - 7.426.84 - 7.6406630690
337.00 362.80 561.80 689.80 924.10 1,120.70 1,457.7010# 12# 19# 26# 30# 38# 55#
8 8.62 - 9.428.99 - 9.7908630905
386.50 402.20 624.70 779.40 1,014.20 1,247.80 1,627.2011# 13# 20# 29# 33# 40# 55#
10 10.72 - 11.7211.04 - 12.2410751110
- - 875.60 - 1,322.60 1,735.80 2,190.0032# 48# 64# 80#
1212.72 - 13.9213.14 - 14.3413.65 - 14.65
127513201365
- - 946.60 - 1,377.60 1,892.70 2,338.3034# 51# 68# 85#
14 15.20 - 16.20 1530- - 1,281.10 - 2,036.90 2,555.40 3,783.00
36# 54# 72# 89#
14 - 16 16.00 - 17.0017.20 - 18.2016001740
- - 1,339.00 - 2,100.60 2,674.60 3,947.2037# 56# 74# 92#
16 - 18 18.40 - 19.40 1846- - 1,375.90 - 2,164.20 2,758.90 4,069.10
39# 59# 78# 97#
18 - 20 19.40 - 20.4020.40 - 21.4019502050
- - 1,397.90 - 2,228.40 2,798.30 4,122.2041# 62# 82# 103#
20 - 22 21.40 - 22.4022.50 - 23.6021602260
- - 1,460.70 - 2,338.80 2,926.00 4,311.5045# 67# 90# 111#
Number of Bolts 4 4 8 8 12 16 20
Multi-Band Clamps
2423.80 - 25.0025.50 - 26.7027.90 - 29.10
240025802800
- - 2,317.80 - 3,365.40 4,608.00 6,825.3059# 88# 108# 146#
24 - 30 29.80 - 31.0031.70 - 32.9030003200
- - 2,709.30 - 4,006.60 5,419.30 7,576.6064# 95# 128# 158#
36 37.85 - 39.20 3830- - 2,921.20 - 4,391.80 6,015.90 8,396.40
82# 123# 164# 205#
7
Image reflects 12 width
Available Options Upon RequestModels 131-132 Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 161 Fabricated Lug Stainless Steel Universal Clamps
The JCM 161 Fabricated Lug All Stainless Steel Clamp offers an economical solution toproblems such as breaks, splits, cracks, holes in all types of pipe. Available in standardsizes, the 161 is a stainless steel clamp that offers all the benefits of stainless: corrosionresistance, lightweight, flexible yet strong.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number. Example: To fit Cast Iron pipe, 6.90 O.D. with 7 width,
order: 161-0690-7
1. Clamp width should be equal to or greater than the pipe diameter for higher working pressures.Contact JCM Industries for recommendations.
2. Not recommended for use for joining plain end pressure pipe.3. Other ranges and widths available upon request.4. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the
clamp, proper anchorage of the pipe must be provided.
Nom.PipeSize
ClampO.D.
Range
161 Stainless SteelUniversal Clamp
Clamp Width - Approximate Weight
7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
2 - 2-1/2 2.35 - 2.632.70 - 3.1302380275
$122.80 201.40 233.70 - - -
5# 8# 10#
3 3.46 - 3.703.73 - 4.1303500400
147.00 233.10 268.10 - - -
6# 9# 11#
44.45 - 4.754.74 - 5.144.95 - 5.355.22 - 5.62
0450048005000525
154.90 239.90 272.40 395.50 485.50 544.50
7# 10# 12# 17# 20# 24#
6
5.95 - 6.356.56 - 6.966.85 - 7.257.05 - 7.457.45 - 7.85
06000663069007100745
183.40 292.30 325.90 504.70 587.30 651.10
9# 13# 17# 20# 26# 34#
8
7.95 - 8.358.54 - 8.948.99 - 9.399.27 - 9.67
9.90 - 10.30
08000863090509401000
212.40 338.10 396.90 565.80 667.70 794.50
11# 16# 21# 25# 32# 44#
10
10.60 - 11.0011.04 - 11.4411.34 - 11.7411.75 - 12.1512.00 - 12.40
10751110114011751200
271.80 424.70 489.20 612.10 871.10 975.00
15# 18# 24# 30# 36# 50#
12
12.60 - 13.0213.10 - 13.5013.40 - 13.8013.70 - 14.1014.00 - 14.40
12751320134013701400
316.20 508.90 605.70 825.40 889.30 1,207.30
17# 20# 27# 34# 40# 56#
Number of Bolts 2 3 4 4 6 8
Available Options Upon RequestModels 161-162 Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14
8
Image reflects 7 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 162 Fabricated Lug All Stainless SteelExtended Range Clamps
JCM 162 All Stainless Steel Extended Range Clamps - for piping systemsthat are exposed to hot soils or corrosive environments. Provides extracorrosion resistance of stainless steel to this means of repair and connecting pipe.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number.Example: To fit Cast Iron pipe, 6.90 O.D. with 7 width,order: 162-0690-7
1. Clamp width should be equal to or greater than the pipe diameter forhigher working pressures. Contact JCM Industries forrecommendations.
2. Not recommended for use for joining plain end pressure pipe.3. Other ranges and widths available upon request.4. Clamps do not prevent lateral movement of pipe. Applications in which
the pipe may move out of the clamp, proper anchorage of the pipemust be provided.
DOUBLE BAND CLAMPS
Nom.PipeSize
ClampO.D.
Range
162 Stainless SteelExtended Range
Clamp Width - Approximate Weight
7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
4 4.44 - 5.244.74 - 5.5704500480
$210.00 332.00 377.20 548.50 660.30 740.309# 13# 16# 25# 27# 34#
6 6.62 - 7.426.84 - 7.6406630690
248.20 395.40 441.30 683.50 804.60 888.9011# 14# 19# 28# 30# 40#
8 8.62 - 9.428.99 - 9.7908630905
287.40 457.70 536.80 768.70 911.40 1,086.6013# 19# 23# 36# 41# 45#
10 10.72 - 11.7211.04 - 12.2410751110
- 585.50 665.80 828.40 1,191.80 1,333.7028# 32# 43# 56# 64#
1212.72 - 13.9213.14 - 14.3413.65 - 14.65
127513201365
- 692.80 840.10 1,105.20 1,227.20 1,678.2030# 40# 52# 60# 80#
14 15.20 - 16.20 1530- 830.40 1,020.40 1,332.40 1,690.10 1,866.40
34# 43# 55# 79# 86#
14 - 16 16.00 - 17.0017.20 - 18.2016001740
- 964.10 1,126.60 1,613.50 1,913.90 2,282.1036# 46# 59# 87# 92#
16 - 18 18.40 - 19.40 1846- 1,043.20 1,202.90 1,751.70 2,041.70 2,375.40
38# 49# 61# 90# 96#
18 - 20 19.40 - 20.4020.40 - 21.4019502050
- 1,174.30 1,335.00 1,933.70 2,385.30 2,734.3043# 52# 63# 94# 101#
20 - 22 21.40 - 22.4022.50 - 23.6021602260
- 1,454.80 1,763.90 2,224.70 2,512.80 3,368.9047# 59# 67# 99# 106#
Number of Bolts 4 6 8 8 12 16
9
Image reflects 12 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 121 Gas Repair Clamps
This popular and economical clamp provides a full circumferential seal whichpermanently repairs cast iron and steel gas service lines. This clamp featurespositive attachment of the stainless band to the lugs, drop-in-bolts and a heavy 1/4gridded gasket.
JCM 121 Gas Repair Clamps meet the Department of Transportation Code 192.
Material Specifications:Band: 18-8 Type 304 Certifiable Prime Stainless SteelLugs: Ductile Iron ASTM A-536, 60-40-18Bolts: Corrosion resistant low alloy per ASTM A242, ANSI A21.11, AWWA C-111. National coarse rolled thread and heavy hex nut.
Optional Stainless Steel 18-8 Type 304 or 316 available. Optional Epoxy Coated low alloy bolts/nuts available.Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber for natural gas, oil, mild acids, bases, water
and sewage. Gasket temperature range -40oF to 180oF (-40oC 82oC). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services.
Coating: Corrosion resistant shop coat paint primer.
Pressure Rating of 121 & 123 Gas Clamps:Cast Iron Pipe:
2 through 8 100 PSI Gas10 through 12 60 PSI Gas
Steel Pipe:2 through 8 100 PSI Gas10 through 12 60 PSI Gas
Do Not use for the repair of Polyethylene Gas Pipe. Suitable for reshaping and marking squeeze off locations. Clamps do not preventlateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided.
Nom.PipeSize
ClampO.D.
Range
121 Gas RepairClamp
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
2 - 2-1/2 2.35 - 2.632.70 - 3.1302380275
$110.30 116.10 191.60 230.70 - -
8# 9# 15# 19#
3 3.46 - 3.703.73 - 4.1303500400
139.00 146.20 221.40 276.40 - - -
8# 10# 16# 20#
4 4.45 - 4.754.74 - 5.1404500480
143.90 151.60 239.60 289.90 350.10 469.50 612.90
9# 11# 18# 22# 26# 36# 44#
6 6.56 - 6.966.85 - 7.2506630690
170.70 179.90 287.80 330.20 429.90 586.50 703.90
10# 12# 19# 24# 29# 38# 48#
8 8.54 - 8.948.99 - 9.3908630905
- 211.10 338.60 387.10 493.20 630.10 786.90
13# 21# 27# 32# 42# 53#
10 10.62 - 11.00 11.04 - 11.4410751110
- 276.40 435.10 499.30 694.50 900.80 1,071.60
18# 34# 36# 50# 68# 72#
12 12.60 - 13.0213.10 - 13.5012751320
- 314.20 499.00 568.80 783.40 1,035.90 1,221.90
20# 37# 40# 52# 74# 80#
Number of Bolts 2 2 4 4 6 8 10
10
Image reflects 6 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 151 All Stainless Steel Gas Repair Clamps
All stainless steel construction provides extra corrosion resistance for permanentrepair of piping systems which are exposed to hot soils or corrosive environments.
JCM 151 Gas Repair Clamps meet the Department of Transportation Code 192.
Material Specifications:Lug: Cast Stainless SteelCF8 equal to 18-8 Type 304
Band: Stainless Steel, 18-8 Type 304Bolts: Stainless Steel, 18-8 Type 304
Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber for natural gas, oil, mild acids, bases, water and sewage. Gasket temperature range -40oF to 180oF (-40oC 82oC). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services.
Pressure Rating of 151 & 153 Gas Clamps:Cast Iron Pipe:
2 through 8 100 PSI Gas10 through 12 60 PSI Gas
Steel Pipe:2 through 8 100 PSI Gas10 through 12 60 PSI Gas
Do Not use for the repair of Polyethylene Gas Pipe. Suitable for reshaping and marking squeeze off locations. Clamps do not preventlateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided.
Nom.PipeSize
ClampO.D.
Range
151 All StainlessGas Repair
Clamp
Clamp Width - Approximate Weight
6 7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
2 - 2-1/2 2.35 - 2.632.70 - 3.1302380275
$161.40 171.50 262.00 315.30 - - -
5# 6# 10# 12#
3 3.46 - 3.703.73 - 4.1303500400
186.80 209.20 317.40 375.20 - - -
6# 7# 11# 13#
4 4.45 - 4.754.74 - 5.1404500480
218.90 230.50 375.80 412.30 570.80 724.00 981.00
6# 7# 12# 14# 18# 24# 28#
6 6.56 - 6.966.85 - 7.2506630690
257.30 267.60 441.80 488.20 677.30 851.40 1,098.10
7# 8# 13# 16# 21# 26# 31#
8 8.54 - 8.948.99 - 9.3908630905
- 295.70 307.80 501.70 761.60 947.80 1,212.20
9# 15# 19# 24# 30# 38#
10 10.62 - 11.00 11.04 - 11.4410751110
- 399.60 698.10 719.00 1,041.00 1,323.70 1,568.10
14# 24# 28v# 36# 48# 56#
12 12.60 - 13.0213.10 - 13.5012751320
- 449.10 776.30 825.80 1,134.30 1,487.30 1,797.10
16# 27# 33# 41# 54# 66#
Number of Bolts 2 2 4 4 6 8 10
11
Image reflects 6 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 168 Fabricated Lug Lightweight Stainless Steel Clamps
The JCM 168 Fabricated Lug All Stainless Steel Clamp offers an economical solution forapplications on sewer systems. Suitable for joining plain end pipe in slip lining applications.Recommended for gravity flow, low pressure sewer applications. For pressure applications,see JCM 161 Fabricated Lug Stainless Steel Clamp.
Conductive Buttons for electrical thawing available upon request for all models.
HOW TO ORDER1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.3. Determine Model Number.4. Specify clamp number.
Example: To fit Cast Iron pipe, 6.90 O.D. with 7 width, order: 168-0690-7
1. Clamp width should be equal to or greater than the pipe diameter for higher working pressures. ContactJCM Industries for recommendations.
2. Not recommended for use for joining plain end pressure pipe.3. Other ranges and widths available upon request.4. Clamps do not prevent lateral movement of pipe. Applications in
which the pipe may move out of the clamp, proper anchorage of thepipe must be provided.
Available in double band, JCM Model 169. Price On Application, Contact JCM Inside Sales Team.
Nom.PipeSize
ClampO.D.
Range
168 Stainless SteelUniversal Clamp
Clamp Width - Approximate Weight
7 12 15 18 24 30
Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.#
44.00 - 4.404.45 - 4.754.74 - 5.14
042004500480
$135.70 210.00 238.80 346.80 425.80 477.20
7# 10# 12# 17# 20# 24#
66.00 - 6.406.56 - 6.966.85 - 7.25
063006630690
160.60 256.80 285.90 442.50 514.90 571.00
9# 13# 17# 20# 26# 34#
88.20 - 8.608.54 - 8.948.99 - 9.39
084008630905
186.20 296.30 347.80 495.80 585.10 696.40
11# 16# 21# 25# 32# 44#
1010.30 - 10.7010.60 - 11.0011.04 - 11.44
105010751110
238.30 372.30 428.70 536.40 763.70 854.60
15# 18# 24# 30# 36# 50#
1212.30 - 12.7012.60 - 13.0213.10 - 13.50
125012751320
277.20 446.10 530.80 723.40 779.40 1,058.20
17# 20# 27# 34# 40# 56#
Number of Bolts 2 3 4 4 6 8
12
Image reflects 7 width
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 108 Universal Clamp Coupling for Sewer PipeFor quick, economical, permanent connection of sewer pipe, straight connections of the same type of pipe, or transitionfrom one type of pipe to another.
The JCM 108 Universal clamp coupling for sewer pipe is designed to connect and repair all types of gravity flow sewerpipe. Each clamp coupling has a wide range of sizes to accommodate the manufacturing tolerances of this type of pipe.This assures a simple and proper installation even under the most adverse field conditions. JCM 108 Universal clampcouplings are furnished standard to join pipe of the same outside diameter. Transition gasket material is furnished withthe clamp coupling when a transition is indicated.
JCM 108 UCC for Sewer Pipe is Priced on Application. For quotation, contact the JCM Inside Sales Team at1-800-527-8482 or 1-903-832-2581.
108 Universal Clamp Couplings for Sewer Pipe
How To Order And Submit For Quote
1. Determine type of pipe and outside diameters of each end to be joined.2. Determine and advise of any special factors involved - such as pressure sewer line or unusual line content.3. Order Universal Clamp Coupling as follows:
A. For repairing or joining pipe with same O.D. refer to JCM 101, 102 Universal Clamp Couplings and order clamp to fit O.D. of pipe.
B. Joining ends with different O.D.s, provide O.D.s and type of pipe to JCM Inside Sales Team.
JCM 108 Universal Clamp Couplings for sewer pipe are fabricated to fit these types of pipe:SDR35 PVC Sewer Pipe
Clay PipeCast Iron Soil PipeAsbestos Cement
C-900 PVC, IPS PVCMaterial Specifications:
Lugs: Model 108 - Ductile Iron per ASTM A536 Model 138 - CF8M Cast stainless steel equal to 316 stainless.
Band: Stainless Steel 18-8 Type 304Gasket: Compounded for use with sewage, water, salt solutions, mild acids, and bases.
Bolts & Nuts: Model 108 - Corrosion resistant, high strength low alloy (AWWA C-111, ANSI 21.11);Model 138 - Stainless steel, 18-8 Type 304.
Transition Gasket Material (Ra-Seal): Pliable butyl rubber sealant for temperature range -65o to 180o F.
108 Straight Clamp CouplingFor repair or connection of similar O.D. pipe.
108 Transition Clamp CouplingFor repairing or connecting pipe of different O.D.s.
138 All Stainless Clamp CouplingFor use in hot or acidic soil conditions. Available in straight & transition styles.
13
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM Tapped Outlet Repair Clamps - 103, 104, 173, 174, 133, 134, 123, 153, 163, 164
All Models of JCM Universal Clamp Couplings are available with tapped outlets for repair of directtap pull outs and broken or split pipe requiring a service outlet.
How To Order
1. Select standard model, size and width clamp to fit pipe.
2. Change model number to corresponding Tapped Outlet Clamp Model Number.
3. Select size and type of tapped outlet from outlet guide below. Note minimum widths and range/sizes.
4. Add Outlet Tap Code to clamp number. Add-On outlet price to standard clamp list price.
Ordering Example:
For standard clamp to fit 6 Cast Iron Pipe with 12 width, with 2 IP outlet, order:
103-0690-12 x 14IP
Standard Clamp Model Tapped Outlet Clamp Model
101 Universal Clamp Coupling - Standard Range102 Universal Clamp Coupling - Extended Range131 All Stainless Steel UCC - Std Range132 All Stainless Steel UCC - Extd Range121 Gas Repair Clamp151 Gas Repair Clamp161 All Stainless Steel Fabricated Lug Clamp162 All Stainless Steel Fabricated Lug Clamp - Ext Range171 UCC - Standard Range - Removeable Lug172 UCC - Extended Range - Removeable Lug
103 Tapped Universal Clamp Coupling - Standard Range104 Tapped Universal Clamp Coupling - Extended Range133 Tapped All Stainless Steel UCC - Std Range134 Tapped All Stainless Steel UCC - Extd Range123 Tapped Gas Service Clamp153 Tapped All Stainless Steel Gas Service Clamp163 All Stainless Steel Tapped Fabricated Lug Clamp164 All Stainless Steel Tapped Fabricated Lug Clamp - Ext Range173 Tapped UCC - Standard Range - Removeable Lug174 Tapped UCC - Standard Range - Removeable Lug
CLAMPRANGE/SIZE
MINIMUMCLAMP
LENGTH
TYPE OF THREAD TAP SIZE
ADD OUTLET TAP CODE ADD-ONTO
STANDARDCLAMP LIST
PRICE
IPORDER
TAP CODE
CCORDER
TAP CODE
2.38 - 4.80 6 IP or CC3/4 06 07
$ 73.901 08 09
2.38 - 14.00 7-1/2 IP or CC3/4 06 07
73.901 08 09
4.50 - 14.00 12 IP or CC 1-1/4 10 11 127.70
4.50 - 14.00 12 IP or CC 1-1/2 12 13 127.70
4.50 - 14.00 12 IP 2 14 - 127.70
4.50 - 14.00 12 CC 2 - 15 150.80
Becomes
14
JCM103123173
JCM133153
JCM163
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 105 Collar Leak ClampsJCM 135 All Stainless Steel Collar Leak ClampsFor Quick, Permanent repairs of solvent weld PVC pipe joints.
JCM 105/135 Collar Leak Clamps provide a simple, quick solution totroublesome leaks in PVC solvent weld pipe systems - without having to cut outfittings or modifying your system. These heavy duty clamps have many featureswhich assure a successful repair, even under the most adverse conditions.
How To Order
1. Determine O.D. of pipe.2. Select proper clamp O.D. range and band width.
3. Specify clamp number. For stan-dard clamp, order model 105. For all stainless clamp, order model num-ber to 135.
EXAMPLE:For 3 Class 160 PVC pipe, order: 105-0350-6.For All Stainless Clamp, order: 135-0350-6.
NOM. PIPESIZE(IN.)
PIPEO.D.SIZE(IN.)
TYPE OF SOLVENT WELD PIPE JOINT
ClampWidth*
CLAMP NUMBER
STANDARD CLAMP
(MODEL 105)
APPRWT.
EACH(LBS.)
ALL STAINLESS
CLAMP (MODEL 135)
APPRWT.
EACH(LBS.)
2 2.38 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0238-60238-7
$ 111.70117.60
7.39.3
$ 168.70176.90
5.36
2-1/2 2.88 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0288-60288-7
116.80126.50
7.79.9
174.60183.60
5.76
3 3.50 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0350-60350-7
129.10141.50
8.010
189.10202.40
67
4 4.50 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0450-60450-7
145.20151.90
9.111
208.70221.30
67
5 5.56 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0556-60556-7
156.50163.80
9.411
222.80235.90
6.57
6 6.63 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELLEND67
0663-60663-7
179.40183.00
1012
248.90260.80
7.58.5
8 8.63 BELL END CLASS 160, 200 SCH 40 COUPLING AND BELL END67
0863-60863-7
199.70211.10
1113
274.60288.60
8.79.5
*OTHER WIDTHS AVAILABLE UPON REQUEST
105 COLLAR LEAK CLAMP FOR PLASTIC IRRIGATION PIPE
NOMINALPIPE SIZE
(IN.)
PIPE O.D. SIZE
(IN.)
CLAMPWIDTH(IN.)*
FOR PIPEWALL
THICKNESS
CLAMP NUMBER
PRICE EACH
APPR. WT. EA.(LBS.)
4 4.125 6 .125 105-0413-6 $145.20 9.1
6 6.140 6 .150 105-0614-6 179.40 9.8
8 8.160 6 .199 105-0816-6 199.70 10.7
10 10.200 6 .249 105-1020-6 299.00 14.1
12 12.240 6 .290 105-1224-6 340.20 14.9
15 15.300 6 .375 105-1530-6 415.60 18.0
*OTHER WIDTHS AVAILABLE UPON REQUEST
15
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 106 Bell Joint Leak Clamp
For quick repair or water tight joint assurance for rubber joint PVC pipe, solvent weld pipe or coupled pipespecify JCM 106 Bell Joint Leak Clamps. These clamps are engineered to provide a simple, dependablerepair or assured joint. In addition, the JCM 106 eliminates possible notching of PVC pipe and offersmaximum versatility and corrosion resistance.
For Repair of:PVC Rubber Joint Bells - Std. Steel Sizes (SDR 26, SDR 21)PVC Solvent Weld Joints and CouplingsStd. Steel Threaded Couplings.
106 BELL JOINT LEAK CLAMPNOM.PIPESIZE(IN.)
PIPEO.D.(IN.)
MAXIMUMBELL O.D.
(IN.)
MAXIMUMLIP O.D.
(IN.)
OVERALLLENGTH*
MAX. STD.CPLG.
LENGTH
CATALOGNUMBER
PRICE EACH
APPR.WT.
EACH(LBS.)
4 4.50 6.13 5.43 11-1/2 7 106-0450 $ 235.70 126 6.63 8.25 7.56 11-1/2 7 106-0663 259.00 178 8.63 10.88 9.56 11-1/2 7 106-0863 358.20 21
*Dimension will change with use of studs.
JCM 143 Bell Joint Leak Clamp - 4 - 36Pipe Sizes 4 - 12 Cast Iron Pipe, Ductile Iron Pipe, C-900 PVCStrong - Split, interlocking rings provide a solid base for maximum gasket compression. Heavy duty
ductile iron components for the life of the pipeline.Eliminates Extra Parts and Time Loss - Each clamp comes complete to repair cast iron, ductile iron
and C-900 PVC in its nominal size without any special order bolts, gaskets or other parts. Simpletransfer from shelf to job site to pipe joint without confusion.
Simple, Fast Installation - Split-rings interlock around pipe and pre-cut gasket eliminates field cutting.Install Under Pressure - Install under pressure to repair leaking joint or install as a leak preventative
on older pipe joints that have been excavated or disturbed during other pipeline maintenance (alow-cost, long-term insurance policy).
Pipe Sizes 14 and Larger for Ductile Iron/Cast Iron PipeFabricated Bell Joint Leak Clamps with split, bolt-on designed provides a postive seal for largediameter Ductile Iron and Cast Iron leaking bells. Designed for long-term service and immediate delivery.
JCM 143 Bell Joint Leak Clamp 14 and Larger - Fabricated SteelSizes 14 and larger based on working ranges of industry standard pipe tolerences +/-To ensure exact fit when ordering provide specific bell/spigot outside diameters.Larger Sizes Available, Contact JCM Sales Team
NOMINAL PIPESIZE(IN.)
CLAMPO.D.
RANGE(IN.)
CATALOG NUMBER
PRICE EACH
APPR. WT.EACH(LBS.)
4 4.80 - 5.00 143-0480 $ 235.70 186 6.90 - 7.10 143-0690 260.20 278 9.05 - 9.30 143-0905 360.70 3310 11.10 - 11.40 143-1110 485.60 4312 13.20 - 13.50 143-1320 560.50 4814 15.30 143-1530 1,979.60 12516 17.40 143-1740 2,276.00 15018 19.50 143-1950 2,446.70 17520 21.60 143-2160 2,670.30 20024 25.80 143-2580 3,126.20 32530 32.00 143-3200 3,798.50 40036 38.30 143-3830 4,735.50 600
16
JCM 143 - 4 - 12
JCM 143 - 14 - 36
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 110 Patch ClampsHow To Order1. Determine clamp size, material options and width required. 2. Order by clamp number.
For Stainless Steel Bolt(s) add (SS) to clamp number.For ALL Stainless Steel Clamp add (AS) to clamp number.Example: All Stainless Steel Clamp for 4 IPS PVC with 4.50 O.D. 3 with, order 110-0450-3AS.
NOMINAL PIPE SIZE (IN.)
PIPE O.D.(IN.)
CLAMP NUMBER
WIDTH(IN.)
PRICE EACHE-GALV. BOLT
PRICE EACHSS BOLTAdd (SS)
PRICE EACHALL STAINLESS
Add (AS)
WT. EA.LBS.
CTN.QTY.
1/2 .84 0084 36$ 11.30
21.00$ 20.00
38.30$ 43.10
77.40.61.2
2010
3/4 1.05 0105 3611.5022.30
20.2039.20
43.7077.70
.61.2
168
1 1.32 0132 3612.8023.50
21.7040.80
45.7080.90
.61.4
168
1-1/4 1.66 0166 3613.4024.20
21.9041.70
46.0082.30
.71.4
126
1-1/2 1.90 0190 3613.8026.30
22.4043.70
51.9099.00
1.12.2
126
2 2.38 023836912
15.3028.1043.0056.90
24.0045.7069.5091.70
52.60102.60160.40213.80
1.12.33.44.5
8422
2-1/2 2.88 028836912
19.7038.4057.0077.40
28.2055.7083.30
112.20
55.60101.30162.10215.50
1.22.43.64.8
8422
3 3.50 035036912
20.3041.5068.0092.10
29.1058.9094.30
127.00
56.90104.10162.80217.40
1.63.24.86.4
8422
4 4.50 045036912
23.6043.9082.20
110.80
32.8062.40
109.80148.60
58.10103.70165.60220.10
1.63.24.86.4
8422
5 5.56 055636912
26.8053.4090.50
121.00
36.1057.40
118.00158.70
60.40106.20167.40223.00
1.73.45.16.8
84--
6 6.63 066336912
28.3053.8093.60
125.10
37.5072.50
121.20162.80
62.20108.10169.30226.20
1.93.85.77.6
84--
8 8.63 086336912
33.1064.40
102.50158.70
42.3068.20
130.00196.70
64.10109.80171.20227.60
2.24.46.68.8
84--
DOUBLE BAND CLAMPS FOR STEEL PIPE SIZES
10 10.75 107536912
61.00126.90207.90271.60
79.80164.10263.30345.60
105.40189.60288.80370.00
3.46.810.213.6
----
12 12.75 127536912
70.60136.20218.70284.80
89.30173.30274.40353.90
115.60198.80299.90378.50
3.77.413.114.8
----
COPPER TUBE SIZES1/2 .63 0063 36
$ 11.3021.00
$ 20.0038.30
$ 43.1077.40
.61.2
2010
3/4 .88 0084 3611.3021.00
20.0038.30
43.1077.40
.61.2
2010
1 1.13 0105 3611.5022.30
20.2039.20
43.7077.70
.61.2
168
1-1/4 1.38 0132 3612.8023.50
21.7040.80
45.7080.90
.61.4
168
1-1/2 1.63 0166 3613.4024.20
21.9041.70
46.0082.30
.71.4
126
2 2.13 0213 3615.3028.00
24.0045.40
52.60102.60
1.12.3
84
An additional 5% charge will be applied to 110 Patch Clamp orders for quantities less than carton quantities listed.
17
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 111 Full-Repair Clamps
JCM 111 Full-Repair clamps are a fast economical means of permanentlyrepairing steel pipe with extensive corrosion, splits, punctures or pin holes.These clamps have a heavy, full circumferential Buna-N gasket with ahardened recessed armor. This provides extra sealing capability for heavilydamaged pipe and pipe with reduced diameter due to corrosion.
JCM 111 FULL-REPAIR CLAMPSSteel Pipe Sizes - IPS Copper Tubes Sizes - CTS
How to Order1. Determine clamp size, material options and width required. 2. Order by clamp number.
For Stainless Steel Bolt(s) add (SS) to clamp number.For ALL Stainless Steel Clamp add (AS) to clamp number.Example: All Stainless Steel Clamp for 2 IPS PVC with 2.38 O.D. 3 with, order 111-0238-3AS
An additional 5% charge will be applied to 111 Full-Repair Clamp orders for quantities less than cartonquantities listed.
Material SpecificationsJCM 110 PATCH CLAMPS and JCM 111 FULL-REPAIR CLAMPS
NOMINALPIPE SIZE
PIPEO. D.(IN.)
TYPE OF PIPE
WIDTH(IN.)
CLAMP NUMBER
PRICEEACH
E-GALV. BOLT
PRICE EACHSTAINLESS
BOLTAdd (SS)
PRICE EACHALL
STAINLESSAdd (AS)
WT. EA.(LBS.)
CTN.QTY.
1/2 0.84 IPS 36111-0084-3111-0084-6
$ 31.1061.90
$ 38.8077.40
$ 81.50143.10
.71.4
2010
3/41.05 IPS 36
111-0105-3111-0105-6
31.3062.30
38.8078.00
82.90144.40
.71.4
168
0.88 CTS 36111-0088-3111-0088-6
31.3062.30
37.4078.00
81.50143.10
.71.4
168
11.32 IPS 36
111-0132-3111-0132-6
33.2065.90
40.9081.80
84.80154.60
.81.5
168
1.13 CTS 36111-0113-3111-0113-6
33.2065.90
40.9081.80
84.80154.60
.81.5
168
1-1/4 1.66 IPS 36111-0166-3111-0166-6
34.3067.80
42.3083.90
93.70155.70
.91.8
126
1-1/21.63 CTS 36
111-0166-3111-0166-6
34.3067.80
42.3083.90
93.70155.70
.91.8
126
1.90 IPS 36111-0190-3111-0190-6
34.6068.20
42.7084.30
93.70155.70
1.32.6
126
2 2.38 IPS 36111-0238-3111-0238-6
38.1070.50
45.9086.50
98.20165.90
1.32.7
84
JCM 110 PATCH CLAMPLug: Ductile Iron ASTM A-536. Optional CF8
Stainless Steel, equal to 304.Gasket: Rubber gasket suitable for gas.
Band: Stainless Steel 18-8 Type 304Hardware: Electro-galvanized Steel.
Stainless Steel available.
JCM 111 FULL-REPAIR CLAMPLug: Ductile Iron ASTM A-536.Optional CF8
Stainless Steel, equal to 304.Gasket: Buna-N
Band: Stainless Steel 18-8 Type 304Hardware: Electro-galvanized Steel.
Stainless Steel available.
18
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 112 Heavy Duty Patch ClampJCM 113 Multi-Band Patch ClampHeavy Duty Patch Clamps provide fast, permanent repair of pinholes, punctures or splits in steel and other types of pipe wherea beam break is not involved. The clamps are readily availablefor all sizes of pipe 1-1/2 and larger.
Material Specifications:Lug: Ductile Iron ASTM A536. Optional Stainless Steel.
Band: Stainless Steel, 18-8 Type 304Gasket: Gridded gasket is compounded for use with water, salt
solutions, mild acids and bases.Other gaskets available upon request.
Bolt & Nuts: Corrosion resistant, high strength low alloy(AWWA C-111, ANSI A21.11).Optional Stainless Steel, 18-8 Type 304 available.
JCM 112 and 113 Heavy Duty Patch Clamps are Priced on Application. For quotation, contact the JCM Inside Sales Team at 1-800-527-8482 or 1-903-832-2581.
How To Order
1. Determine pipe size.
2. Select proper clamp and width.
3. Specify clamp number.
EXAMPLE: For 8 steel pipe with 6 width, order: 112-0863-6.For optional stainless steel bolts, add (SS) to end of part number: 112-0863-6 (SS).
112 HEAVY DUTY PATCH CLAMP 113 MULTI-BAND PATCH CLAMPNOM.PIPESIZE(IN.)
CLAMPO.D.
RANGE
CLAMP NUMBER
WIDTH(IN.)
PRICE EACH
WT. EA.LB.
NOM.PIPESIZE(IN.)
CLAMPO.D.
RANGE
CLAMP NUMBER
WIDTH(IN.)
PRICE EACH
WT. EA.LB.
1-1/2 1.90 - 2.00 112-0190-6112-0190-126
12 P.O.A.6
12 10 10.00 - 10.75113-1000-6113-1000-12
612 P.O.A.
1734
2 2.38 - 2.50 112-0238-6112-0238-126
12 P.O.A.6
12 12 12.00 - 12.75113-1200-6113-1200-12
612 P.O.A.
19.38
2-1/2 2.88 - 3.00 112-0288-6112-0288-126
12 P.O.A.6
12 14 14.00 - 14.75113-1400-6113-1400-12
612 P.O.A.
2040
3 3.50 - 3.88 112-0350-6112-0350-126
12 P.O.A.6
13 16 16.00 - 16.75113-1600-6113-1600-12
612 P.O.A.
2346
3-1/2 4.00 - 4.35 112-0400-6112-0400-126
12 P.O.A.7
14 18 18.00 - 18.75113-1800-6113-1800-12
612 P.O.A.
2449
4 4.50 - 4.85 112-0450-6112-0450-126
12 P.O.A.8
15 20 20.00 - 20.75113-2000-6113-2000-12
612 P.O.A.
2652
5 5.56 - 6.00 112-0556-6112-0556-126
12 P.O.A.8
15 22 22.00 - 22.75113-2200-6113-2200-12
612 P.O.A.
2754
6 6.63 - 6.90 112-0663-6112-0663-126
12 P.O.A.8
16 24 24.00 - 24.75113-2400-6113-2400-12
612 P.O.A.
2856
8 8.63 - 9.05 112-0863-6112-0863-126
12 P.O.A.8
17 30 30.00 - 30.75113-3000-6113-3000-12
612 P.O.A.
2958
1010.00 - 10.30 112-1000-6112-1000-12
612 P.O.A.
918 36 36.00 - 36.75
113-3600-6113-3600-12
612 P.O.A.
3162
10.75 - 11.10 112-1075-6112-1075-126
12 P.O.A.9
18LARGER OR OTHER SIZES AVAILABLE UPON REQUEST.
FOR COMPLETE BREAKS USE JCM UNIVERSAL CLAMP COUPLINGS MODELS 101, 102
1212.00 - 12.30 112-1200-6112-1200-12
612 P.O.A.
918
12.75 - 13.05 112-1275-6112-1275-126
12 P.O.A.1020
19
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 114 Mechanical Joint Split Repair SleeveJCM 114 Mechanical Joint Bell Repair Sleeve
How To Order
JCM 114 Mechanical Joint Repair Sleeves meet or exceed AWWA C-110/111, ANSI A21.10/21.11 as applicable.
Material Specifications:Body: ASTM A-36 Steel, ASTM 285 Grade C Steel or equal. Optional stainless steel available.
Pusher Glands: ASTM A-36 Steel or ASTM A-536 Ductile Iron. Optional stainless steel available.Bolts: Corrosion resistant, high strength low alloy AWWA C-111/ANSI 21.11
Gasket: Nitrile rubber compounded for use with water, salt solutions, mild acids and bases.Finish: Heavy coat of corrosion resistant shop coat primer.
Optional fusion epoxy coating per ANSI/AWWA C-213.
JCM 114 Mechanical Joint Repair Sleeve is available fabricated of all 304 or 316 stainless steel.
JCM 114 Mechanical Joint Repair Sleeves are Priced on Application. For quotation, contact the JCM InsideSales Team at 1-800-527-8482 or 1-903-832-2581.
The JCM 114 MJ Split Repair Sleeve represents anunusually simple method of coupling or repairing straightruns of cracked or split cast iron pipe and severelongitudinal and circumferential breaks on critical servicelines which can not be shut down. This product is made toorder for all types and sizes of pipe.
The JCM 114 MJ Bell Repair Sleeve is designed topermanently repair cracked cast iron bells, split or leakingcouplings and leaking joints. By utilizing a split mechanicaljoint design, repairs to joints can be completed withoutdown time or disruption to service. The JCM 114 is built tothe application dimensions, ensuring a custom fit over thedamaged area. These sleeves are ideal for installationwhere strength, weight and continued service are critical.
JCM 114 Mechanical Joint Split Repair SleeveThe following information must be furnished.
Type of PipePipe Outside DiameterLength RequirementsLine ContentLine PressureFinish or Coating Requirements
JCM 114 Mechanical Joint Bell Repair SleeveThe following information must be furnished.
Type of PipeSpigot or Pipe Outside DiameterLargest Bell or Coupling DimensionLength RequirementsLine Content Line PressureFinish or Coating Requirements
20
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 116 Repair Sleeve for Concrete Steel Cylinder Pipe
The JCM 116 Repair Sleeve for Concrete Steel Cylinder Pipe provides a quick easy means of repairing and reinforcingdamaged concrete steel cylinder pipe of all sizes. This repair sleeve permits repairs to be made on any side of the pipe- without requiring complete stripping of the concrete. The standard repair gasket seals around a 12 damaged area.Larger repair sizes are available. This sleeve is especially recommended for larger sizes of pipe and where the con-crete and pipe require reinforcement.
Minimal Pipe Excavation - JCM 116 Repair Sleeve requires limitedpipe exposure around the damaged area. Full section joint exposure iseliminated.
Wide Supportive Body - reinforces pipe which is weakened due tostructural interruption. The bodys grout seal assembly provides a sys-tem for replacement of the critical corrosion retarding concrete encase-ment. By restoring the concrete casing, the steel cylinder is protectedfrom corrosive elements.
Eliminates Excessive Concrete Coating Removal - concreteremoval is limited to the damaged area only, preventing further pipestructural damage
Epoxy Coated Repair Plate - the internal repair plate is fusion epoxycoated to provide a quality repair protected against corrosion in the pipeinterior.
Eliminates Welding On Thin Cylinders - JCM 116 directly repairs thedamaged cylinder making a watertight seal, preventing the line contentsfrom infiltrating the concrete-steel interface.
Availability - The JCM 116 Repair Sleeve for Concrete Steel CylinderPipe is available from JCM on both an emergency and a contingencybasis. Timely delivery and installation prevents extensive pipe damage,content loss and environmental violations.
JCM 116 Repair Sleeves for Concrete Steel Cylinder Pipe are Priced on Application. For quotation, contact theJCM Inside Sales Team at 1-800-527-8482 or 1-903-832-2581.
JCM 116 Repair Sleeve for Large Diameter PipeThe JCM 116 Repair Sleeve is also recommended for repairs on large diameter pipe including cast iron, ductile iron,steel, and other types of large diameter rigid pipe. The direct concentration of bolting pressure to the repair gland areaenables the 116 to repair the damaged area while maintaining the pipelines pressure capability.
How To Order
For pricing and engineering, the following information must be furnished:
Type of pipe (also manufacturer and class if known)Diameter of damaged areaOutside Diameter of Concrete and CylinderLine Content and Pressure
Any special requirements or options
Material Specifications:
Body: ASTM 285 Grade C or ASTM A-36Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000.
Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for inter-nal and external retention. Gasket temperature range -40oF to 212oF (-40oC - 100oC) Gasket suitable for water, salt solutions, mild acids, bases, and sewage.
Bolts: Corrosion resistant, high strength low alloy (AWWA C-111, ANSI A21.11). Optional stainless steel, 18-8 Type 304.
Finish: Heavy coat of corrosion resistant primer on sleeve, gland and straps. Waterway of gland is epoxy coated (fusion applied per ANSI/AWWA C-213). Optional fusion epoxy coating on entire sleeve.
21
Price List Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
Material Specifications for JCM Universal Clamp Couplings
Models 101 - 102, 171 - 172, 105, 108 Ductile Iron Lug - Stainless BandBand: 18-8 Type 304 Certifiable Prime Stainless SteelLugs: Ductile Iron ASTM A-536, 60-40-18Bolts: Corrosion resistant low alloy per ASTM A242, ANSI A21.11, AWWA C-111.
National coarse rolled thread and heavy hex nut.Optional Stainless Steel 18-8 Type 304 or 316 available.Optional Epoxy Coated low alloy bolts/nuts available.
Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water,salt solutions, mild acids and bases. Per ASTM D-2000 M4AA 607. Standardtemperature range from -40o to 150oF (-40o to 65o C) constant, maximumintermittent 180o F (82o C). For applications on high temperatures or chemicalpipelines, contact JCM Industries Technical Services.
Coating: Corrosion resistant shop coat paint primer.
Models 103 - 104, 173 - 174Tapped Outlet: 18-8 Type 304 Stainless Steel
Models 131 - 132, 135, 138 All Stainless SteelBand: Certifiable 18-8 Type 304 Stainless Steel.
Optional 316 Stainless Steel available.Lugs: CF-8 Cast Stainless Steel (equivalent to 304 Stainless Steel). Optional 316
Stainless Steel available.Bolts: 18-8 Type 304 Stainless Steel. Optional 316 Stainless Steel available.
Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, saltsolutions, mild acids and bases. Per ASTM D-2000 M4AA 607. Standardtemperature range from -40o to 150oF (-40o to 65o C) constant, maximumintermittent 180o F (82o C). For applications on high temperatures or chemicalpipelines, contact JCM Industries Technical Services.
Models 133 - 134Tapped Outlet: 18-8 Type 304 Stainless Steel
Models 161 - 162, 168 - 169 All Stainless Steel Fabricated LugLug Assembly: 18-8 Type 304 Stainless Steel
Band: 18-8 Type 304 Stainless SteelBolts: 18-8 Type 304 Stainless Steel
Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Per ASTM D-2000 M4AA 607. Standard temperature range from -40o to 150oF (-40o to 65o C) constant, maximum intermittent 180o F (82o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services.
Models 163 - 164Tapped Outlet: 18-8 Type 304 Stainless Steel
JCM Universal Clamp Couplings meet or exceed the ANSI/AWWA C230 Standard as applicable.Conductive Buttons are available for all models of JCM Clamps.For optional materials, specialty application criteria, and other product specific information, contact JCM Industries Sales Team at 800-527-8482 or 903-832-2581, [email protected].
22
Price Book Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice. 23
JCM Selection Guide to Couplings
PRODUCT NUMBER & TYPE APPLICATION, SIZES AND ADDITIONAL INFORMATION
201 Steel Couplings
202 Long Sleeve Steel Coupling
Steel couplings for joining steel, galvanized, PVC and other pipe withstandard steel dimensions 1/2 - 24. Available for cast iron and otherpipe in sizes 14 and larger.
Provides longer length for longer space between pipe ends. Especiallygood for repairing PVC pipe. Sizes 2 - 12. Larger sizes on request.
203 Steel Transition Coupling
204 Steel Reducing Coupling
For connection of oversize to standard size pipe within the samenominal pipe size. Special ranges available.
For connection of any combination of two sizes or types of pipe eitherto increase or decrease sizes.
210 Ductile IronCoupling
211 Ductile IronCoupling
212 Ductile IronTransitionCoupling
The standard wide range coupling for joining Cast Iron, Ductile Iron, A-C, C-900/C-905 PVC and other types of pipe. Sizes 2 - 12.
Sized for steel and IPS PVC this ductile iron coupling offers moredeflection capability and corrosion resistance than steel couplings.Sizes 2- 12.
Utilizes special transition gaskets in standard ductile iron couplings tojoin pipe of the same nominal size but different outside diameters.Sizes 2-1/4 - 12.
214 Pipe End Cap Coupling
Provides a simple means of capping all types of plain end pipe. Alsoused for line testing, air release and reducing line for serviceextensions. Sizes 3 - 12. Larger sizes on request.
215 Long Ductile Iron Coupling
Extra long coupling provides a wide range, accommodates wide gapsbetween pipe ends, reduces inventory and fits both cast iron and A/CClass 150 pipe in the popular 4, 6 and 8 sizes. Utilizes the JCMoriginal transition gasket system.
219 RestrainedDuctile Iron Coupling
Simplifies piping installations requiring couplings and tie rods or othertypes of restraint. Provides an easy joint makeup with restraint in aminimum amount of space. Sizes 4 - 12.
241 Standard Length Optimum Range Coupling
242 Long Length Optimum Range Coupling
Optimum range coupling accommodates all types of pipe within thesame nominal size. No change of gasket, end rings or bolts. Can beinstalled without complete disassembly. Sizes 3 - 16.
Price Book Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 201 Steel Couplings for Steel Pipe SizesJCM 201 Steel Couplings provide an easy means of joining plainend pipe. These couplings are especially applicable for use onsteel, galvanized, PVC and other pipe with standard steeldimensions.
Available options for JCM 201 Steel Couplings:
Epoxy Coated Bolts and Nuts - P.O.A., contact JCM Indside Sales Team EPDM Gaskets
201 STEEL COUPLINGS FOR STEEL PIPE SIZES
NOMINAL PIPE SIZE(IN.)
PIPEO.D.
RANGE(IN.)
SLEEVELENGTH
&THICKNESS
NO.OF
BOLTS
CATALOG NUMBER
CARTONQUANTITY
PRICE EACH
(E)EPOXY COATADD
TO LIST
(SS)STAINLESSSTEEL 304
HARDWAREADD TO LIST
APPR.WT.
EACHLBS.
1/2 .84 .157 x 3-1/2 2 201-008401 12 $ 36.00 $ 21.70 $ 24.40 13/4 1.05 .157 x 5 2 201-010501 12 40.10 21.70 24.40 21 1.32 .157 x 5 2 201-013201 12 41.50 21.70 24.40 3-1/2
1-1/4 1.66 .138 x 5 2 201-016601 6 43.60 21.70 24.40 41-1/2 1.90 .157 x 5 2 201-019001 6 52.10 21.70 24.40 4-1/2
2 2.38 .157 x 5 2 201-023800 6 59.50 21.70 24.40 52 2.38 .157 x 5 3 201-023801 1 79.60 21.70 73.00 7
2-1/2 2.88 .197 x 5 3 201-028801 1 92.40 21.70 73.00 83 3.50 .157 x 5 4 201-035001 1 107.70 21.70 97.30 103 3.50 .157 x 7 4 201-035002 1 126.60 21.70 155.90 124 4.50 .157 x 5 4 201-045001 1 127.90 28.80 97.30 124 4.50 .157 x 7 4 201-045002 1 146.80 28.80 155.90 155 5.56 1/4 x 5 4 201-055601 1 220.20 28.80 97.30 166 6.63 1/4 x 5 6 201-066301 1 174.60 28.80 146.10 186 6.63 1/4 x 7 6 201-066302 1 191.20 28.80 234.10 228 8.63 1/4 x 5 6 201-086301 1 206.20 28.80 146.10 208 8.63 1/4 x 7 6 201-086302 1 226.60 28.80 234.10 26
10 10.75 1/4 x 5 8 201-107501 1 268.90 28.80 194.60 3210 10.75 5/16 x 7 8 201-107507 1 373.30 28.80 194.60 4612 12.75 1/4 x 5 8 201-127501 1 309.90 28.80 311.90 5112 12.75 5/16 x 7 8 201-127507 1 456.70 28.80 311.90 6214 14.00 3/8 x 7 8 201-140007 1 511.90 36.00 311.90 8916 16.00 3/8 x 7 10 201-160007 1 677.50 36.00 354.60 9518 18.00 3/8 x 7 10 201-180007 1 707.80 36.00 354.60 10220 20.00 3/8 x 7 12 201-200007 1 1,125.90 P. O. A. P. O. A. 11522 22.00 3/8 x 7 14 201-220007 1 1,428.20 P. O. A. P. O. A. 12624 24.00 3/8 x 7 14 201-240007 1 1,315.80 P. O. A. P. O. A. 13228 28.00 3/8 x 7 16 201-280007 1 P. O. A. P. O. A. P. O. A. 14030 30.00 3/8 x 7 17 201-300007 1 P. O. A. P. O. A. P. O. A. 15836 36.00 1/2 x 10 18 201-360009 1 P. O. A. P. O. A. P. O. A. 25042 42.00 1/2 x 10 20 201-420009 1 P. O. A. P. O. A. P. O. A. 31548 48.00 1/2 x 10 22 201-480009 1 P. O. A. P. O. A. P. O. A. 375
Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided.
24
Price Book Effective March 4, 2013. Cancels all previous prices. Prices subject to change without notice.
JCM 201 Steel Couplings 14 and Larger
Material Specifications:
Gaskets: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber. Gasket temperature range -40oFto 212oF (-40oC - 100oC) Recommended for water, salt solutions, mild acids, bases, sewage and natural gas.Available Options: EPDM
Bolts & Nuts: Nominal sizes 2 and larger: minimum 5/8 bolts ASTM A242/ANSI 21.11/AWWA C-111 corrosion resistant, highstrength low alloy; heavy hex nuts A563 per ANSI/AWWA C-219. Available Options: epoxy coated, Powercron 590-534; Stainless Steel 18-8
Finish: Heavy coat of corrosion resistant shop coat primer. Optional fusion applied epoxy per ANSI/AWWA C-213.
Working Pressure:Rated for 250 PSI working pressure when installed per manufacturers instructions. Please contact JCM concerningpressure rating on specific sizes.
JCM 200 Series Bolted Couplings are ANSI/NSF Standard 61 CertifiedJCM 200 Series Bolted Couplings meet or exceed the ANSI/AWWA C-219 Standard as applicable.
201 STEEL COUPLINGS 14 AND LARGER
NOM.PIPESIZE(IN.)
PIPEO.D. RANGE
(IN.)
SLEEVELENGTH &
THICKNESS
NO. OF
BOLTS
CATALOGNUMBER
PRICE EACH
(E)EPOXY COATADD
TO LIST
(SS)STAINLESSSTEEL 304
HARDWAREADD TO LIST
APPR.WT.EA.
(LBS.)
14 15.30 3/8 X 7 8 201-153007 $ 758.70 $ 36.00 $ 311.90 8514 15.65 3/8 X 7 10 201-156507 769.80 36.00 311.90 8514 16.75 3/8 X 7 10 201-167507 822.60 36.00 394.60 8916 17.40 3/8 X 7 10 201-174007 824.90 36.00 394.60 9016 17.80 3/8 X 7 10 201-178007 834.70 36.00 394.60 9016 18.88 3/8 X 7 10 201-188807 876.20 36.00 394.60 9518 19.50