2013 Product Line Brochure -...

Cat® 2013 Product Line Brochure

Backhoe Loaders – Center Pivot, Side Shift . . . . . . . . . . . . . . . . . 3Skid Steer Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Multi Terrain Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Compact Track Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Integrated Toolcarriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Wheel Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Medium Wheel Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Large Wheel Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Steel Mill Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Waste/Scrap Handling Arrangements . . . . . . . . . . . . . . . . . . . . . 4Block Handler Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Forest Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Telehandlers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Track Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Rotary Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Draglines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Electric Rope Shovels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Hydraulic Shovels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Excavators – Hydraulic Excavator, Compact and Reduced Radius, Super Long Reach,

Front Shovel, Wheel Hydraulic . . . . . . . . . . . . . . . . . . . . 6Material Handlers – Wheel, Track . . . . . . . . . . . . . . . . . . . . . . . . . 7Track Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Track-Type Tractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Compactors – Landfill, Soil . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 9Wheel Dozers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Wheel Dozer Scoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Towed Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Motor Graders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Wheel Tractor-Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Articulated Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Cat® Articulated Truck Bare Chassis for Specialty Applications . . . . . . . . . . . . . . . . . . . . . . . 10Off-Highway Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Cat OHT Truck Bare Chassis for Specialty Applications . . . . 10Mining Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Off-Highway and Mining Truck Bodies . . . . . . . . . . . . . . . . . . . 11Highwall Mining System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Longwall Mining Equipment Roof Support Systems (custom-made) . . . . . . . . . . . . 11 Shearers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Automated Plow Systems . . . . . . . . . . . . . . . . . . . . . . . 12 AFC Line Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CST Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Roof Support Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Room and Pillar Mining Equipment Continuous Miners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Miner Bolter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Face Haulers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Continuous Haulage Systems . . . . . . . . . . . . . . . . . . . . 13

Room and Pillar Mining Equipment (cont’d) Scoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 LHD Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Feeder Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Roof Bolters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Hard Rock Mining Equipment Underground Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Underground Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rock Flow Haulage System – Rock Feeder, Rock Mover . . . . . . . . . . . . . . . . . . . . . . . 14 Shaft Jumbos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Belt Systems and Belt Products Surface Idlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Underground Idlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Engineered Class Pulleys . . . . . . . . . . . . . . . . . . . . . . . 15 Engineered BTGs for Surface and Underground . . . 15 Pre-Engineered BTGs for Underground . . . . . . . . . . . 15Pipelayers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Forest Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Forest Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Skidders – Track, Wheel . . . . . . . . . . . . . . . . . . . . . . . . 16 Wheel Loaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Feller Bunchers – Track, Wheel . . . . . . . . . . . . . . . . . . 16 Forwarders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Harvesters – Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Knuckleboom Loaders – Stationary Mount . . . . . . . . 17Paving Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Cold Planers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Reclaimers/Stabilizers . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Compactors – Single Drum Soil, Pneumatic Tired . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 18 Tandem Vibratory Rollers . . . . . . . . . . . . . . . . . . . . . . . 18 Asphalt Paving Equipment . . . . . . . . . . . . . . . . . . . . . . 18Electric Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Generator Set Packages . . . . . . . . . . . . . . . . . . . . .19, 20 Rental Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Electrical Systems . . . . . . . . . . . . . . . . . . . . . . . . . .20, 21Industrial Power Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Fire Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Oil and Gas Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Petroleum Transmissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Marine Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23CX On-Highway Transmissions . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Work Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Technology Products: Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Machine Technology Matrix . . . . . . . . . . . . . . . . . . . . 31

Table of Contents

NOTE: All engine horsepower (hp) units listed in document are Imperial measurements unless otherwise stated.

3

BackhoeLoaders Center Pivot

Net Operating Power Weight Dig DepthModel hp kW lb kg ft-in mm

416F 87 65 14,953 6783 14'4" 4360

Note: Available for select Africa, Middle East countries as well as South Africa

Side Shift

Net Operating Dig Depth Power Weight Standard ExtendableModel hp kW kg mm mm

422F LRC 71 53 7481-9261 4843 5765428F LRC 87 65 8436-10 269 4775 5730432F LRC 95 71 8924-10 757 4775 6199434F LRC 87 65 9600-11 666 4884 5806444F LRC 71 95 9900-11 934 4885 6277

Skid SteerLoaders Net Rated Operating Operating Power Capacity WeightModel hp kW lb kg lb kg

216B Series 3 47 35 1,400 635 5,690 2581226B Series 3 56 42 1,500 680 5,822 2641236B Series 3 71 53 1,950 884 7,007 3178242B Series 3 71 53 2,150 975 7,008 3179246C 73 54 2,150 975 7,480 3393252B Series 3 71 53 2,650 1202 7,861 3565256C 82 61 2,350 1066 7,665 3477262C 82 61 2,700 1225 7,968 3614

Multi TerrainLoaders Net Operating Operating Ground Power Weight Capacity PressureModel hp kW lb kg lb kg psi kPa

247B Series 3 56 42 6,997 3174 2,150 975 4.0 27.3257B Series 3 71 53 8,060 3656 2,675 1213 4.5 31.0277C 82 61 9,495 4307 3,200 1451 3.7 25.5287C 82 61 9,958 4517 3,800 1724 3.9 26.9

Note: At 50% tipping load

Compact Track Loaders Net Operating Operating Ground Power Weight Capacity PressureModel hp kW lb kg lb kg psi kPa

259B Series 3 71 53 8,934 4052 2,950 1338 6.0 41.2279C 82 61 9,892 4487 3,200 1451 4.0 27.2289C 82 61 10,365 4702 3,850 1746 4.1 28.5

Note: At 50% tipping load

IntegratedToolcarriers Compact

Net Operating Bucket Power Weight RangeModel hp kW lb kg yd3 m3

IT14G 98 72 18,632 8450 1.6-1.8 1.2-1.4

Wheel Loaders Compact

Net Operating Bucket Power Weight CapacityModel hp kW lb kg yd3 m3

906H2 69 52 12,412 5630 1.6 1.2907H2 69 52 12,809 5810 1.6 1.2908H2 69 52 14,253 6465 2.0 1.5914G2 95 71 17,530 7950 1.6-1.8 1.2-1.4

Small


924H 139 104 25,644 11 632 2.2-3.6 1.7-2.8924Hz 139 104 24,180 10 968 2.2-2.7 1.7-2.1928Hz 161 120 27,699 12 564 2.6-3.0 2.0-2.3930H 161 120 28,725 13 029 2.6-6.5 2.1-5.0938H 180 134 33,190 15 059 3.0-7.2 2.3-5.5

Note: Net power is based on ISO 9249

4

Medium Wheel Loaders

H Series


950H 197 147 40,435 18 338 3.25-12.00 2.50-9.20962H 211 158 42,700 19 365 3.25-12.00 2.50-9.20966H 262 195 52,254 26 698 3.75-13.00 2.90-9.90972H 287 214 55,451 25 148 3.75-13.00 2.90-9.90980H 349 260 67,294 30 519 5.25-16.00 4.00-12.20

Large Wheel Loaders Net Operating Bucket Power Weight CapacityModel hp kW lb kg yd3 m3

986H 409 305 93,090 42 225 7.0-8.0 5.3-6.1988H 501 373 110,549 50 144 8.3-10.0 6.4-7.7990H 627 468 171,642 77 842 11.0-12.0 8.4-9.2992K 814 607 220,089 99 831 14.0-16.0 10.7-12.3993K 973 726 294,800 133 637 16.0-31.0 12.2-23.7994H 1463 1092 430,858 195 434 18.5-47.0 14.0-36.0

Steel MillArrangements Net Operating Bucket Power Weight CapacityModel hp kW lb kg yd3 m3

966H Steel 262 195 54,205 24,287 4.5 3.44972H Steel 287 214 55,855 26 037 4.5 3.44980H Steel 349 260 67,718 31 452 5.0 3.82988H Steel 501 373 110,549 50 144 7.0 5.4990H Steel 627 468 190,640 86 655 12.0 9.2

Waste/ScrapHandlingArrangements


950H WHA 211 157 34,620 15 700 6.75 5.2962H WHA 221 165 36,639 16 620 6.75 5.2966H WHA 267 199 42,732 19 380 8.50 6.5972H WHA 288 215 47,283 21 450 8.50 6.5980H WHA 369 274 55,448 25 150 14.50 11.0

Block HandlerArrangements

Net Operating Power Weight Tine Length Rated LoadModel hp kW lb kg in mm lb kg

980H Block 349 260 72,113 32 719 60 1524 25,959 11 778 Net Operating Lift Capacity Power Weight (Ground Level)Model hp kW lb kg lb kg

988H Block 501 373 128,328 58 330 103,928 47 133

Note: CEN EN 474-3 firm and level ground – 80% FTSTL

Forest Arrangements Net Full Turn Static Tipping Load Power Weight Grapple Fork (Level)Model hp kW lb kg lb kg

950H 197 147 38,901 17 650 19,104 8668966H 261 195 53,775 24 399 28,257 12 821980H 349 260 72,970 33 108 34,158 15 498988H 501 373 128,328 58 330 65,740 29 819990H 627 468 198,334 89 963 77,799 35 289

Note: Base forestry machine weight without forks

Telehandlers Operating Rated Lift Power Weight Capacity HeightModel hp kW lb kg lb kg ft-in m

TH255 84 63 10,800 4899 5,500 2500 18'4" 5.6TH406 101/ 74.5/ 15,875 7200 8,150 3700 20'0" 6.1 126 93.1TH407 101/ 74.5/ 16,980 7700 8,150 3700 24'0" 7.3 126 93.1TH336 101/ 74.5/ 14,495 6573 7,275 3300 20'0" 6.1 126 93.1TH337 101/ 74.5/ 15,595 7073 7,275 3300 24'0" 7.3 126 93.1TH414 101 74.5 20,640 9360 8,150 3700 45'9" 14.0TH514 101 74.5 23,725 10 760 11,025 4999 45'0" 13.7TH417 101 74.5 26,020 11 800 8,825 4000 55'7" 17.3

5

Track Drills Hole Diameter Hole Rock up to Depth Compressor DrillModel in mm ft m ft3/min m3/min hp kW

MD50501 4 102 66.5-102.5 20.3-31.2 250 7.0 25 19MD5050 T1 4 102 66.5-102.5 20.3-31.2 250 7.0 25 19MD50751 5 127 72.5-102.5 22.1-31.2 350 9.9 25 19MD50901 5 127 66.5-72.5 20.3-22.1 300 8.5 25 19MD51252 6 152 58.5-98.5 17.8-30.0 400 11.3 37 28MD51502 6 152 102.5 31.0 534 15.1 38 28

1 Rock Drill – HPR4519 2 Rock Drill – HPR5128

Rotary Drills Bit Load Hole Hole Depth up to Diameter Single-Pass Working WeightModel lb kg in mm ft m lb kg

MD62401 52,911 24 000 6.0- 152- 42.0- 12.8- 138,891 62 500 10.6 270 52.0 15.8MD62902 63,934 29 000 6.0- 152- 28.2- 8.6- 120,152 54 500 10.6 270 36.1 11.0MD64203 92,594 42 000 9.0- 229- 33.8- 10.3- 201,723 91 500 12.3 311 54.0 16.5MD65404 119,050 54 000 9.0- 229- 54.1- 16.5- 288,806 131 000 15.0 381 65.6 20.0MD66405 141,096 64 000 9.6- 244- 60.0- 18.3- 339,512 154 000 16.0 406 70.0 21.3MD67506 165,347 75 000 10.8- 273- 65.0 19.8 404,548 183 500 17.5 445

1 Multi-Pass Hole Depth – up to 182 ft (55.5 m) 2 Multi-Pass Hole Depth – up to 173 ft (52.7 m) 3 Multi-Pass Hole Depth – up to 244 ft (74.4 m) 4 Multi-Pass Hole Depth – up to 279 ft (85.0 m) 5 Multi-Pass Hole Depth – up to 280 ft (85.3 m) 6 Multi-Pass Hole Depth – up to 130 ft (39.6 m)

Draglines Rated Bucket Boom Suspended Working Capabilities Lengths Load WeightModel yd3 m3 ft m lb kg mil. lb mil. kg

8000 41- 31- 250 76.2 207,000 93 000 3.9 1.8 42 32 or or or or 275 83.8 210,000 95 2008200 60- 46- 328 100 300,000- 136 077- 8.5- 3.8- 80 61 400,000 181 437 9.1 4.18750 100- 76- 360- 109.7- 500,000- 226 800- 13.1- 5.9- 152 116 435 132.5 760,000 344 736 15.9 7.2

ElectricRope Shovels Dipper Haul Trucks Payload Capacity 3-Pass Load 4-Pass LoadModel tons tonnes yd3 m3 tons tonnes tons tonnes

7295 50 45.4 24-51 18.4-39.0 150 136 205 1867395 70 63.5 25-80 19.1-61.2 205 186 240 2187495 HD 90 81.0 25-80 19.1-61.2 240 218 360 3277495 120 109.0 40-80 30.6-61.2 360 327 400 3637495 HF 120 109.0 40-80 30.6-61.2 360 327 400 363

HydraulicShovels Engine Operating Size Output Weight (SAE 2:1)Model hp kW tons tonnes yd3 m3

Front Shovel Configurations6015 FS 700 522 116 105 9.2 7.06018 FS 1150 858 195 177 13.1 10.06030 FS 1530 1140 324 294 21.6 16.56040 FS 2032/2000 1516/1492 438 397 28.8 22.06050 FS 2520 1880 579 525 34.0 26.06060 FS 3000 2240 620 562 44.5 34.06090 FS 4500 3360 1,080 980 68.0 52.0 Engine Operating Size Output Weight (SAE 1:1)Model hp kW tons tonnes yd3 m3

Backhoe Configurations6015 700 522 117 106 9.2 7.06018 1150 858 181 200 13.1 10.06030 1530 1140 327 297 22.2 17.06040 2032 1516 438 397 28.8 22.06050 2520 1880 589 534 36.6 28.06060 3000 2240 622 565 44.5 34.0

6

Hydraulic Excavators Mini

Net Operating Max Operating Power Weight Reach/DepthModel hp kW lb kg ft-in m or mm

300.9D 13 9.6 2,060 935 9.9"/5.6" 3028/1731301.4C 17.7 13.2 3,417 1550 12"/7.3" 3650/2240301.7D 17.7 13.2 3,810 1728 12'1"/7'2" 3700/2200302.2D 17.7 13.2 4,707 2135 13'6"/8'2" 4130/2490302.4D 17.7 13.2 5,115 2320 13'2"/7'9" 4020/2400302.7D CR 20.7 15.2 5,886 2670 15'1"/8'3" 4613/2544303.5E CR 31.6 23.6 8,139 3692 17'10"/10'4" 5.4/3.2304E CR 40 30 8,838 4009 18'4"/11'3" 5.6/3.4305E CR 40.2 30 11,217 5088 19'7"/12'1" 6.0/3.7305.5E CR 44.2 32.9 11,938 5415 20'3"/12'8" 6.2/3.9307D 55 41 15,858 7193 20'3"/13'5" 6.2/4.1

Net Operating Max Power Weight Reach/DepthModel hp kW lb kg ft-in m

Small

312D2 L 90 67 29,100 13 200 28'3"/19'10" 8.6/6.0318D2 L 110 82 37,490 17 000 29'6"/21'0" 9.0/6.4319D L 125 93 42,950 19 900 31'8"/22'7" 9.6/6.9

Medium

320D L 138 103 47,550 21 570 32'4"/22'1" 9.9/6.7323D L 150 110 51,810 23 500 33'6"/22'0" 10.2/6.7324D L 148 110 51,808 23 500 32'4"/22'1" 9.9/6.7329D L 204 152 65,120 29 540 36'7"/25'8" 11.1/7.8

Large

336D L 268 200 79,700 36 151 38'5"/26'10" 11.7/8.2340D L 285 209 188,682 85 585 38'4"/26'1" 11.7/7.96349D L 380 283 97,760 44 340 39'9"/26'11" 12.1/8.2374D L 476 355 161,100 73 066 46'8"/31'8" 14.2/9.7390D L 523 390 194,500 88 225 56'7"/38'9" 17.2/11.8

Compact and Reduced Radius Net Operating Max Power Weight Reach/DepthModel hp kW lb kg ft-in m

311D LRR 80 60 27,510 12 480 26'7"/18'4" 8.1/5.6314D LCR 90 67 31,090 14 100 28'3"/19'4" 8.6/5.9321D LCR 138 103 53,308 24 180 32'2"/22'0" 9.8/6.7328D LCR 204 152 76,500 34 700 35'2"/22'8" 10.7/6.9

Super Long Reach (SLR) Net Operating Max Power Weight Reach/DepthModel hp kW lb kg ft-in m

320D L SLR 138 103 50,460 22 890 51'2"/38'6" 15.6/11.8324D L SLR 188 140 61,600 27 900 61'0"/47'11" 18.6/14.6329D L SLR 204 152 68,300 31 000 61'0"/47'11" 18.6/14.6

FrontShovel (FS) Operating Bucket Capacity Power Weight RangeModel hp kW lb kg yd3 m3

385C FS 523 390 199,739 90 600 6.0-8.5 4.6-6.5

WheelHydraulic Max Net Operating Max Power Weight Reach/DepthModel Engine kW kg m

M313D C4.4 ACERT™ 95 16 200 9.21/5.75M315D C4.4 ACERT 101 18 300 9.56/6.09M316D C6.6 ACERT 118 19 200 9.56/6.07M318D C6.6 ACERT 124 20 100 9.77/6.36M322D C6.6 ACERT 123 22 500 10.49/6.68

7

Track MaterialHandlers Net Operating Max Power Weight Reach/HeightModel hp kW lb kg ft-in m

330D MH 268 200 98,400 44 625 47'11"/51'11" 14.6/15.8330D MH 268 200 98,400 44 625 52'6"/55'5" 16.0/16.9345C MH 345 257 126,600 57 430 54'2"/55'6" 16.5/16.9345C MH 345 257 126,600 57 430 59'1"/59'1" 18.0/18.0385C MH 513 382 203,000 92 060 53'3"/56'6" 16.2/17.2385C MH 513 382 203,000 92 060 74'0"/71'6" 22.6/21.8

Track Loaders Operating Bucket Power Weight CapacityModel hp kW lb kg yd3 m3

953D 148 110 34,209 15 517 2.42 1.85963D 189 141 44,577 20 220 3.2 2.45973D 263 196 61,857 28 058 4.19 3.2

Note: Includes GP bucket plus long bolt-on teeth and segments

Waste Handler

Operating Bucket Power Weight CapacityModel hp kW lb kg yd3 m3

953D WH 148 110 35,494 16 100 3.0 2.3963D WH 189 141 46,297 21 000 4.05 3.1973D WH 263 196 65,157 29 555 6.4 4.9

Note: Includes GP Landfill bucket with bottom cutting edge

Wheel MaterialHandlers Net Operating Max Power Weight (Max) Reach/HeightModel hp kW lb kg ft-in m

M313D Ind1 129 95 34,835 15 800 26'0"/28'0" 7.9/8.5M318D Ind1 169 124 44,313 20 100 28'0"/28'3" 8.5/8.6M318D MH 169 124 50,045 22 700 36'1"/39'6" 11/12.04M322D MH 165 123 56,659 25 700 41'0"/43'8" 12.48/13.3M325D MH 190 140 72,752 33 000 50'10"/55'1" 15.5/16.8M325D MH2 190 140 73,854 33 500 51'10"/52'6" 15.8/16.1M325D L MH 190 140 81,571 37 000 50'8"/56'7" 15.5/17.3M325D L MH2 190 140 82,673 37 500 51'8"/54'8" 15.8/16.7

1 Industrial Stick2 Barge Boom 32.48 ft/9.9 mNote: Net power is based on ISO 9249

All engine horsepower (hp) are metric

Waste Handler

Max Net Operating Max Power Weight Reach/HeightModel hp kW lb kg ft-in m

M318D MH WH 169 124 46,275 20 990 30'7"/34'3" 9.33/10.44

8

Track-TypeTractors Operating Power WeightModel hp kW lb kg Blade

D3K XL1 74 55.2 17,185 7795 VPATD3K LGP1 74 55.2 17,842 8093 VPATD4K XL1 84 62.6 17,961 8147 VPATD4K LGP1 84 62.6 18,742 8501 VPATD5K XL1 96 71.6 20,741 9408 VPATD5K LGP1 96 71.6 21,347 9683 VPATD6K XL/LGP 125 93 28,409- 12 886- VPAT 29,690 13 467D6K2 XL/LGP3,4 130 97 29,346- 13 311- VPAT 30,750 13 948D6N XL/LGP7 150 112 36,497- 16 555- VPAT, 39,112 17 741 SU-XLD6N XL/LGP3,6 150 112 36,392- 16 507- VPAT, 39,895 18 096 SU-XLD6R STD1,9 175 131 40,400- 18 325- S, SU, A 41,148 18 669D6R XL/LGP9 195 145 44,270- 20 080- S, SU, A 47,874 21 715 D6T XL/XW/LGP3,4 205 153 46,158- 20 937- S, SU, A, 54,165 24 569 VPATD7E STD/LGP3,4 235 175 57,441- 26 055- S, SU, U, A 62,886 28 525D7R STD/XR/LGP9 240/ 179/ 55,041- 24 962- S, SU, A 2608 1948 59,758 27 101D8R STD/LGP9 303 226 77,550- 35 176- SU, U, A 83,600 37 920D8T STD/LGP2,5 310 231 79,759- 36 179- SU, U, A 84,850 38 488D8T STD/LGP3,6 310 231 87,733- 39 795- SU, U, A 89,210 40 465D9R2 405 302 107,550 48 784 SU, UD9T2 410 306 110,447 50 098 SU, UD10T2 580 433 146,499 66 451 SU, UD11T2 850 634 229,848 104 257 SU, UD11T2 Carrydozer 850 634 248,456 112 698 CD

1 Available with MS ripper2 Available with MS ripper, SS ripper, counterweight3 Meets EU Stage IIIB emission standards4 Available in Israel and Turkey only5 Available in Turkey only6 Available in Israel only7 Not available in Israel8 For CIS only9 Not available in Israel and Turkey

Waste Handlers

Operating Power WeightModel hp kW lb kg Blade

D6N XL/LGP1 150 112 38,224- 17 338- SU (XL), 42,454 19 257 VPATD6N XL/LGP2,3 150 112 38,119- 17 290- SU (XL), 43,237 19 612 VPAT D6R WH XL/LGP4 195 145 49,648- 22 520- S, SU 52,470 23 800D7R STD/XR/LGP1 240/ 179/ 60,870- 27 610- S, SU, A 2607 1947 65,190 29 570D8R WH STD/LGP4 305 228 82,880- 37 630- S, SU 83,687 37 960D8T WH STD/LGP5 310 231 85,150- 38 660- SU, U 90,770 41 259 D6T WH XL/XW/LGP2,6 205 153 51,121- 23 237- S, SU, A, 59,457 27 026 VPATD7E WH STD/LGP2,6 235 175 63,730- 28 908- SU, U 68,600 31 116D8T WH STD/ LGP2,3 310 231 85,650- 38 887- SU, U 91,270 41 436D9T WH 410 306 109,276 49 567 SU, UD10T WH 580 433 144,985 65 764 U

1 Not available in Israel2 Meets EU Stage IIIB emission standards3 Available in Israel only4 Not available in Israel and Turkey5 Available in Turkey only6 Available in Israel and Turkey only7 For CIS only

LandfillCompactors Gross Operating Blade Width Power Weight Over End BitsModel hp kW lb kg ft-in mm

816F2 253 189 52,364 23 744 12'0" 3657826H 401 299 81,498 36 967 14'9" 4502836H 554 413 122,586 55 604 17'0" 5193

9

Motor Graders

K Series

Base Operating Weight Standard Power – Net Typically Equipped Blade LengthModel hp kW lb kg ft m

120K 125 93 30,519 13 843 12 3.712K 145 108 31,543 14 308 12 3.7140K 170 127 33,307 15 108 12 3.7160K 186 139 34,994 15 873 14 4.3

M Series

Operating Maximum Weight Base Net Power with Typically Standard Power – Net Optional VHP+ Equipped Blade LengthModel hp kW hp kW lb kg ft m

120M 138 103 182 136 37,204 16 875 12 3.712M 183 136 213 159 40,565 18 400 12 3.7140M 183 136 233 174 41,868 18 991 12 3.7140M 223 166 268 200 43,834 19 883 12 3.7AWD160M 213 159 248 185 43,464 19 715 12 3.714M 259 193 294 219 53,738 24 375 14 4.316M 297 221 332 248 67,338 30 544 16 4.924M1 533 397 – – 145,152 65 840 24 7.3

1 Ripper is standard on 24M and is included in the operating weight

Wheel Tractor-Scrapers Capacity Top Speed Power struck/heaped LoadedModel hp kW yd3 m3 mph km/h

621H 407 304 17.1/24 13/18.4 33.5 53.9623H 407 304 18.8/23 14.4/17.6 33.5 53.9627H (T) 407 304 17.1/24 13/18.4 33.5 53.9 (S) 290 216631G 462/500 345/373 24/34 18.3/26 33 53637G (T) 462/500 345/373 24/34 18.3/26 33 53 (S) 266/283 198/211637G (T) 462/500 345/373 41/50 31/38 33 53(Coal Bowl) (S) 266/283 198/211657G (T) 564/600 421/447 32/44 24.5/33.6 33 53 (S) 410/451 306/337657G (T) 564/600 421/447 59/73 45/56 33 53(Coal Bowl) (S) 410/451 306/337

SoilCompactors Net Operating Blade Width Power Weight Over End BitsModel hp kW lb kg ft-in mm

815F2 232 173 47,877 21 713 12'4" 3761825H 354 264 72,164 32 734 15'1" 4628

WheelDozers Net Operating Blade Power Weight WidthModel hp kW lb kg ft-in mm

814F2 232 173 47,877 21 713 11'8" 3556824H 354 264 63,325 28 724 14'8" 4507834H 498 372 103,849 47 106 16'8" 5074844H 627 468 156,120 70 815 17'4" 5278854K1 801 597 216,273 98 199 21'8" 6321

1 Serial Number Prefix 880 (Tier 4 Final) and ZMX (Tier 2 equivalent)

Wheel DozerScoops

Net Operating Scoop Carry Power Weight CapacityModel hp kW lb kg yd3 m3

824H Coal 354 264 63,325 28 724 17.5 13.4834H Coal 475 354 120,230 54 535 30 23.0824H Chip 354 264 63,325 28 724 27 20.6834H Chip 475 354 120,230 54 535 35 27.0

TowedScrapers

Heaped Rated Width Capacity Load of CutModel yd3 m3 lb kg in mm

TS180 18.8 14.4 45,900 20 800 126 3200TS185 19.0 14.5 46,400 21 050 143 3632TS220 23.5 19.0 56,400 25 580 137 3480TS225 23.5 19.0 56,400 25 580 143 3632

10

Off-Highway Trucks

Net Nominal Power Capacity Top SpeedModel hp kW tons m/ton mph km/h

770 476 355 40 36.3 46.5 74.8770G 483 360 43.5 39.5 45.7 73.5772 535 399 50 45.0 49.5 79.7772G 557 415 52.6 47.7 49.5 79.7773E 672 501 61.1 55.5 38.6 62.2773G 733 546 60 54.4 41.9 67.5775G 783 584 70 63.5 41.9 67.5777D 938 699 100 90.4 39.9 60.4777G 945 704 100 90.7 40.1 64.5

Cat OHTTruck Bare Chassis for Specialty Applications Payload Capacity Water Tank SizeModel tons tonnes gal L

Off-Highway

770G WTR – – 9,000 34 000772G WTR – – 11,000 41 500773G WTR – – 13,000 49 200775G WTR – – 15,000 56 600777G WTR – – 20,000 75 700

Mining

785D WTR – – 30,000 113 562

Mining Trucks

Gross Nominal Power Capacity Top SpeedModel hp kW tons m/ton mph km/h

785C 1450 1082 150 136 34 55785D 1450 1082 150 136 34 55789D 1900-2100 1417-1566 200 181 35.5 57.2793D 2415 1801 250 227 33.7 54.2793F 2270-2650 1693-1976 250 227 37.3 60793F AC 2300-2750 1715-2051 240 218 40 64795F AC 3000-3400 2237-2536 350 318 40 64797F 3550-4000 2647-2983 400 363 42 67.6MT4400D AC 2500 1864 240 218 40 64MT5300D AC 2750-3500 2051-2610 320 290 37 60

Articulated Trucks

Net Power Operating Weight – Body (ISO 9249/14396) Empty CapacityModel hp kW lb kg tons m/ton

725 304 227 49,075 22 260 26 23.6730 321 239 50,375 22 850 31 28.1730 Ejector 321 239 56,330 25 550 31 28.1735B Tier 2 442 330 71,002 32 206 36 32.7740B Tier 2 477 356 75,237 34 127 39.5 43.5740B EJ Tier 2 477 356 80,751 36 628 42 38

Cat Articulated Truck Bare Chassis for Specialty Applications Water Tank Size Rated Load Empty Loaded (Approx)Model tons tonnes tons tonnes tons tonnes gal L

Standard Wheel Base – With Hoist

725 29.8 27.0 20.7 18.8 50.5 45.9 5,000 19 000730 35.1 31.8 21.1 19.2 56.2 51.0 6,000 22 700735B 42.1 38.2 30.7 27.9 72.8 66.1 7,000 26 500Tier 2740B 51.8 47.0 32.0 29.0 83.8 76.0 8,000 30 300Tier 2Long Wheel Base – With Hoist

725 28.8 26.2 21.7 19.7 50.5 45.9 6,000 22 700730 33.8 30.6 22.4 20.3 56.2 51.0 7,000 26 500735B 40.8 37.0 32.0 29.0 72.8 66.1 8,000 30 300Tier 2740B 50.5 45.8 33.3 30.2 83.8 76.0 9,000 34 000Tier 2

Note: Water tank sizes listed are estimated based on typical OEM tanks currently available. Please refer to specific OEM for additional information.

Rated Load – Rated payload including OEM additionsEmpty – Operating weight of bare chassis machine, excluding optionsLoaded – Weight of the fully loaded machine, excluding optionsB Series LRC weights shown

Note: Bare Chassis applications could include: Water, Service (Fuel & Lube), High Capacity Body (Waste, Coal, etc.), Open Body (Log, Pipe, etc.), Container Carrier, Hook Lift, Tow, Cable Reel, etc.

Bare Chassis are available with or without hoist.

11

LongwallMining Equipment Roof Support Systems (custom-made)

Shield Center Height DensityType (examples) mm m kN/m2

RHH Plow Shield 1500 0.55-1.65 up to 700 GH Plow Shield 1500/1750 0.7-2.4 up to 1150Shearer (low) 1750/2050 1.0-3.0 up to 1150Shearer (high) 1750/2050 2.2-6.0 up to 1250LTCC 1750/2050 2.0-4.7 up to 1200

Shearers

Minimum Seam Range Installed Power Pan WidthModel m kW mm

EL1000 1.6-3.2 1780 932EL2000 1.8-4.6 up to 1900 1032EL3000 2.5-5.5 up to 2295 1132EL4000 4.0-7.0 up to 2295 1342

HighwallMining System HW300

Weight 496,040 lb (225 000 kg)Mine Mode Dimensions Width: 34.0 ft (10.4 m) Height: 28.3 ft (8.6 m) Length: 66.5 ft (20.3 m)Maximum Penetration Capability 1,000 ft (305 m)

Off-Highway and Mining Truck BodiesFlat Floor

BodyDual Slope

Body Quarry Body X Body MSD II BodyGateless

Coal BodyCombination

Body770 ✔ ✔ ✔

772 ✔ ✔ ✔

770G ✔ ✔

772G ✔ ✔

773E ✔

773G ✔ ✔ ✔

775G ✔ ✔ ✔

777D ✔ ✔

777G ✔ ✔ ✔

785C ✔ ✔ ✔ ✔ ✔

785D ✔ ✔ ✔ ✔

789D ✔ ✔ ✔ ✔ ✔

793D ✔ ✔ ✔ ✔ ✔

793F ✔ ✔ ✔

795F ✔ ✔

797F ✔

✔ Available

Not Available

12

LongwallMining Equipment Automated Plow Systems

Typical Cutting Height Installed PowerModel m kW

RHH 800 0.8-1.6 2x 400GH 800 1.0-2.0 2x 400GH 1600 1.1-2.3 2x 800

AFC Line Pans

Dogbone Top Plate Width Outside Breaking Force Thickness AverageModel mm kN mm t/h

PF3 822 2000 30 1300PF4 932/1032/1132 3600 40 1800/2500/3500PF5 1042/1142/1342 4500 50 2500/3500/5000PF6 1042/1142/1342 4500 30 + 25 2500/3500/5000 PF7 1542 4500 30 + 25 6200

CST Drives

Maximum Output Torque (for a short duration Installed Power of 3 sec) Class kW N·m Primary Use

30 up to 500 300 000 AFC45 V up to 1050 450 000 AFC65 up to 1200 650 000 AFC115 up to 1800 1 150 000 AFC

Roof Support Carriers

Operating Height Capacity PowerModel in mm tons tonnes Type

SH620 52 1320 22 20 BatterySH630 60 1524 36 32.6 BatterySH650 68 1727 50 45 BatterySH650 VFD 68 1727 50 45 BatterySH640 D 72.4 1890 44 40 DieselSH650 D 68 1727 50 45 DieselSH660 D 78 1980 60 55 DieselSH660 HD 78 1980 66 60 DieselSH680 84 2133 80 72 BatterySH150 (Shield Trailer) 73 1867 60 55

Room and PillarMining Equipment Continuous Miners

Load Rate up to 0 to Max Cut tons/ tonnes/ Total Power WeightModel in mm min min hp kW tons tonnes

CM210 28-60 711-1524 12 11 770 575 53.0 48.0CM210 NP 28-60 711-1524 10 11 770 575 45.4 41.0CM220 36-92 914-2337 20 18 770 575 56.7 51.4CM230 44-112 1118-2858 25 23 910 680 63.5 57.6CM235 36-128 914-3251 32 29 940 701 67.0 61.0CM240 60-155 1530-3931 25 23 930 694 68.0 61.7CM3401 60-162 1526-4115 39 35 905 679 77.0 70.0CM345 N 81-182 2057-4621 28 30 975 727 75.0 68.0CM445 59-135 1499-3785 15- 14- 975 727 85.7 77.7 39 35

1 Cutter Head Power – 560 hp/418 kW

Miner Bolter

Load Rate up to 0 to Max Cut tons/ tonnes/ Total Power WeightModel in mm min min hp kW tons tonnes

CM845 71-185 1800-4700 35 31.5 904 674 101 92

13

Room and PillarMining Equipment Face Haulers

Operating Payload Height Capacity PowerModel in mm tons tonnes Type

FH110 42 1066 10 9 BatteryFH120 56 1422 19 17 BatteryFH125 D 74.8 1900 22 20 Diesel

Note: To operating height indicated and above

Continuous Haulage Systems

Operating Conveyor Height Width CapacityModel in m in mm tons/min tonnes/min

FH330 36-50 0.9-1.3 30 762 20 18FH336 45-184 1.1-4.7 36 914 30 27

Scoops


SU482 32 760 7.5 6.8 BatterySU482 DN 40 1016 7.5 6.8 DieselSU488 L 44 1120 10.0 9.1 BatterySU488 50 1270 16.0 14.5 BatterySU488 D 50 1270 16.0 14.5 DieselSU488 DM 50 1270 16.0 14.5 BatterySU488 DN 50 1270 16.0 14.5 Diesel

Note: To operating height indicated and above

LHD Vehicles


CL106 66.9 1700 6.6 6 DieselCL110 66.9 1700 11.0 10.0 DieselCL115 59.0 1499 15.0 13.5 DieselCL210 73.4 1864 11.0 10.0 DieselCL215 81.0 2056 16.5 15.0 DieselSU488 LHD 44.0 1120 10.0 9.1 Diesel

Feeder Breakers

Operating Conveyor Height Width Max CapacityModel in mm in mm tons/h tonnes/h

FB85 34-54 863-1372 56 1422 950 860FB1101 54 1372 48 1219 1,263 1146FB1401 54 1372 56 1422 1,526 1385

1 To operating height indicated and above

Roof Bolters

Operating RangeModel in mm Boom Frame

RB1201 32-82 813-2083 Single FixedRB2201 32-96 813-2438 Dual ArticulatedRB230 47-120 1194-3048 Dual Articulated

1 To operating height indicated and above

Hard RockMining Equipment

Underground Trucks

Gross Payload Body Power Capacity CapacityModel hp kW tons tonnes yd3 m3

AD30 408 304 33.1 30.0 14.8-22.9 11.3-17.5AD45B 589 439 49.6 45.0 23.6-32.8 18.0-25.1AD60 7761 5791 66.1 60.0 35.2-47.9 26.9-36.6 8052 6002

1 1st gear2 2nd-7th gear

14

Hard RockMining Equipment

Underground Loaders

Gross Rated Bucket Power Payload CapacityModel hp kW tons tonnes yd3 m3

R1300G 165 123 7.5 6.8 3.1-4.4 2.4-3.4R1600G 2481 1851 11.2 10.2 5.5-7.7 4.2-5.9 2682 2002

R1700G 3233 2413 15.4 14.05 6.0-11.5 4.6-8.8 3534 2634

R2900G 4301 3211 19.0 17.2 8.2-11.6 6.3-8.9 4472 3332

R2900G XTRA 4301 3211 22.0 20.05 10.9-15.2 8.3-11.6 4472 3332

1 1st gear2 2nd-4th gear3 1st-3rd gear4 4th gear5 Tramming onlyR1700G rated at 13.4 tons (12.5 tonnes) for truck loadingR2900G XTRA rated at 19.0 tons (17.2 tonnes) for truck loading

Rock Flow System –

Continuous Hard Rock

Haulage System

Rock Feeder Dimensions Performance (L × W × H) Weight TotalModel tons/h tonnes/h ft mm tons/h tonnes/h

RF300 331 300 14.1 × 6.6 4300 × 2000 22.6 20.5 × 3.4 × 1050

Rock Mover

Performance Drive Power Chain SpeedModel tons/h tonnes/h hp kW ft/min m/sec

RM900 992 900 2 × 102 2 × 75 29.5 0.15

Shaft Jumbos

Maximum Maximum Feed Hole Size Hole Depth Number SizeModel in mm ft m of Booms ft m

MD10011 5 127 15 4.5 1 16 4.87MD10021 5 127 15 4.5 2 16 4.87MD10031 5 127 15 4.5 3 16 4.87MD1001 P2 3 76 11 3.3 1 12 3.65MD1002 P2 3 76 11 3.3 2 12 3.65MD1003 P2 3 76 11 3.3 3 12 3.65

1 Rock Drill – HPRH 4519 (electric)2 Rock Drill – S36 (air)

Belt Systemsand Belt Products Surface Idlers

Ratings CEMA C, D, ERoll Diameter CEMA C and D; 4, 5 and 6 in

(10, 13 and 15 cm)CEMA E; 6-7 in (15.2-17.8 cm)

Roll Design Steel and/or EXALON (HMWPE)Belt Width 18-96 in (45.7-243.8 cm)

Underground Idlers Ratings CEMA C, D, ERoll Diameter CEMA C and D; 4, 5 and 6 in

(10, 13 and 15 cm)CEMA E; 6-7 in (15.2-17.8 cm)

Roll Design Steel and EXALON (HMWPE)Belt Width 18-96 in (45.7-243.8 cm)Configuration Floor Mounted, Roof Hung, Wire Rope,

Catenary, Flex Pal

Engineered Class Pulleys Application Surface and UndergroundDesign Type T-Bottom and Turbo-DiscPulley Specifications Designed to meet specific tension

requirements for any conveyor systemBelt Widths Up to 96 in (2400 mm)Lagging Type Diamond Grooved, Ceramic

(Cold or Vulcanized Bond)

15

Belt Systemsand Belt Products Engineered BTGs for Surface and Underground DriveInstalled Power Up to 5,000 hp (3750 kW)Belt Width Up to 84 in (2200 mm)Belt Speed Up to 1,000 ft/min (5.08 m/sec)Capacity Up to 10,000 tons/h (9072 tonnes/h)Configuration Right Angle Alignment-Free and

Fixed-Alignment SolutionsDrive Technology AC VFD, Fluid Coupling Drives,

DC Drives, SCR Drives, Across the Line

Take-Up Belt Width Up to 84 in (2200 mm)Carriage Travel Up to 140 ft (43 m)Design Hydraulic Cylinder, Electric Constant

Tension Winch, Hydraulic Winch, Gravity

Storage Units Belt Width Up to 84 in (2200 mm)Belt Storage Up to 1,600 ft (490 m)Design Electric Constant Tension Winch,

Hydraulic Winch

Remote Discharge Belt Width Up to 84 in (2200 mm)Design Remote A-Frame, Remote

Adjustable Boom

Loading Sections Belt Width Up to 84 in (2200 mm)Design Tail, IntermediateBelt Plow V-plow, Diagonal

Pre-Engineered BTGs

for Underground

DrivePower 300 to 500 hp (223 to 372 kW)Belt Width 48 in (121 cm)Belt Speed 550 and 650 ft/min (2.7 and 3.3 m/sec)Capacity 1,800 to 2,200 tons/h

(1633 to 1996 tonnes/h)

Take-Up Belt Width 48 in (121 cm)Carriage Travel 20 to 30 ft (6 to 9 m)Design Hydraulic Cylinder

Remote Discharge Belt Width 48 in (121 cm)Design Fixed or Adjustable Boom

Tail Section Belt Width 48 in (121 cm)Design Sloped or Flat

Combo Drive Power 150 hp (111 kW)Belt Width 42/48 in (106/121 cm)Belt Speed 580 ft/min (2.9 m/sec)Conveyor Length Up to 1,500 ft (457 m)Conveyor Lift 0 to 40 ft (0 to 12 m)Capacity 1,200 tons/h (1089 tonnes/h)

16

Wheel Loaders Net Full Turn Static Tipping Load Power Weight Grapple Fork (Level)Model hp kW lb kg lb kg

988H 475 354 133,931 60 750 68,834 31 288990H 627 468 196,763 89 250 78,203 35 547

Feller Bunchers Track – Zero Tail Swing

Operating Gross Max Reach Weight Power Tractive Effort (with Head) (w/o Head)Model hp kW lb kg ft m lb kg

521B 303 226 70,500 31 978 26.6 8.1 60,629 27 501522B 303 226 75,500 34 246 26.6 8.1 71,711 32 527

Track – Full Tail Swing

Operating Gross Max Reach Weight Power Tractive Effort (with Head) (w/o Head)Model hp kW lb kg ft m lb kg

541 Series 2 303 226 175,500 34 246 28.1 8.6 67,960 30 826552 Series 2 303 226 104,000 47 174 28.1 8.6 78,960 35 816

Wheel Feller Bunchers

Gross Power Wheelbase WeightModel Engine hp kW in mm lb kg

553C C6.6 ACERT 174 130 110 2794 30,560 13 862

Note: Gross Power – ISO 14396Weight with 28L × 26 tires, less attachment

Pipelayers Operating Lifting Power Weight CapacityModel hp kW lb kg lb kg

PL61 125 93 37,480 17 000 40,000 18 145PL83 310 231 106,807 48 447 160,000 72 575PL87 366 273 120,119 54 485 214,000 97 069

ForestMachines Operating Power Weight Max ReachModel hp kW lb kg ft m

320D FM 147 110 66,812 30 300 36 11.0324D FM 188 140 76,945 34 975 38-40 11.6325D FM 204 152 91,338 41 430 40-42 12.2

Note: Weight without tool and with Under/Under log loader front

Skidders Track Skidders

Net Operating Grapple Power Weight Track Length Capacity RangeModel hp kW lb kg in mm ft2 m2

527 Grapple 150 112 48,281 21 890 121 3061 9.0-10.0 0.84-0.93527 Cable 150 112 41,270 18 720 112 2846

WheelSkidders

Gross Operating Grapple Power Weight Wheelbase Capacity RangeModel hp kW lb kg in mm ft2 m2

525C 196 146 39,045 17 711 139.2 3534 12.5-14.4 1.16-1.34535C 218 162 39,780 18 044 139.2 3534 14.4-16.6 1.34-1.54545C 232 173 42,325 19 198 155.1 3939 16.6-19.0 1.54-1.78Note: Available as Industrial, Cable, Single Arch (525C only)

and Dual Arch Arrangements

17

Forwarders Gross Load Max Loader Operating Power Capacity Reach WeightModel hp kW lb kg ft m lb kg

564(6-wheel) 174 130 30,000 13 608 22.90 6.9 36,000 16 330574(8-wheel) 174 130 32,000 14 525 22.90 6.9 38,000 17 237584(6-wheel) 274 204 39,683 18 000 26.25 8.0 44,600 20 230584 HD(8-wheel) 274 204 44,092 20 000 26.25 8.0 50,900 23 088

Harvesters Track Harvesters

Gross Max Reach Operating Weight Power Tractive Effort (with Head) (w/o Head)Model hp kW lb kg ft m lb kg

501 HD 163 122 43,400 19 686 27.0 8.2 40,000 18 000

Knuckleboom Loaders Stationary Mount

Gross Max Operating Max Lift Power Reach Weight CapacityModel hp kW ft m lb kg lb kg

519 SM 75 55.9 27.0 8.2 15,915 7219 19,229 8730519 SM/EHC 75 55.9 27.0 8.2 15,315 6947 19,229 8730569 SM 100 74.5 32.5 9.9 18,945 8593 41,417 18 803569 SM/EHC 100 74.5 32.5 9.9 18,345 8321 41,417 18 803

Note: Maximum Lift Capacity with Standard BoomOptional booms available

Cold Planers Gross Operating Cutting Width Max Working Power Weight Standard DepthModel hp kW lb kg in mm in mm

PM1021 225 168 38,810 17 600 40 1000 12 305PM200– 2.0 m 575 429 66,359 30 100 79 2010 12.6 320PM200– 2.2 m 575 429 69,445 31 500 88 2235 12 3051 The PM102 is also available with a rubber-tire undercarriage

Reclaimers/Stabilizers Gross Operating Cutting Width Max Working Power Weight Standard DepthModel hp kW lb kg in mm in mm

RM300 350 261 53,911 24 454 96 2438 20 508RM500 540 403 62,060 28 145 96 2438 20 508

Note: Weight with ROPS, cab and Universal rotor. RM300 and RM500 can be outfitted with optional rotors for various applications and conditions. RM300 and RM500 are capable of both full depth reclamation (Max working depth 16"/406 mm) or soil stabilization depending on rotor configuration.

Single DrumSoil Compactors Gross Operating Drum Power Weight WidthModel hp kW lb kg in mm

CS44 100 75 15,961 7240 66 1676CP44 100 75 16,832 7635 66 1676CS533E 130 97 23,900 10 840 84 2134CP533E 130 97 25,750 11 680 84 2134CS533E HW 130 97 27,249 12 360 84 2134CS54 130 97 23,900 10 840 84 2134CP54 130 97 25,420 11 530 84 2134CS54 XT 130 97 27,249 12 360 84 2134CS56 156 116 25,885 12 500 84 2134CP56 156 116 25,765 12 450 84 2134CS64 156 116 31,901 14 470 84 2134CP64 156 116 32,062 14 545 84 2134CS74 156 116 34,584 15 685 84 2134CP74 156 116 34,315 15 565 84 2134CS76 174 130 37,457 16 990 84 2134CP76 174 130 37,759 17 127 84 2134CS76 XT 174 130 38,404/ 17 420/ 84 2134 41,557 18 850 84 2134

Note: Weights with ROPS/FOPS cab

18

Asphalt Paving Equipment Gross Operating Standard Power Tractor Weight Paving WidthModel hp kW lb kg ft-in mm

AP255E 46 34.1 9,9201 45001 4'7" 1400AP300 71 52 12,787 5800 5'7" 1700AP500E 144 106 27,760 12 590 8'4" 2400(Tamper)AP555E 144 106 30,887 14 052 8'4" 2400(Tamper) AP600D(Tamper) 174 129 30,865 14 000 8'2" 2550AP655D (Tamper)(Mobil-trac™) 174 129 33,180 15 050 8'0" 2400(Steel Track) 174 129 33,180 15 050 8'0" 2400AP1000E 225 168 33,352 15 160 10'0" 3000AP1055E(Mobil-trac) 225 168 36,982 16 810 10'0" 30001 Weight includes screed

Screeds

Standard Max Min Paving Range Paving Width Paving WidthModel ft-in mm ft-in mm ft-in mm

AS2302C (Electric) 10'0"- 3000- 22'0" 6700 8'0" 2400Vibratory 18'0" 5486AS3143 (Electric) 4'7"- 1400- 9'10" 3000 1'8" 500Vibratory 8'6" 2600AS3173 (Electric or LPG) 5'7"- 1700- 13'1" 4000 2'2" 650Vibratory 10'6" 3200AS3301C (Electric) 10'0"- 3000- 24'2" 7400 8'0" 2400Vibratory 19'6" 5944AS4251C (Electric) 8'4"- 2550- 26'3" 8000 – –Vibratory and Tamper Bar 16'5" 5000AS4252C (Electric) 8'4"- 2550- 26'4" 8000 8'4" 2550Vibratory and Tamper Bar 16'4" 5000

PneumaticTired Compactors Gross Operating Rolling Power Weight WidthModel hp kW lb kg in mm

PS150C 100 75 28,535 12 940 69 1743PS150C HW 100 75 38,000 17 273 69 1743CW34 131 98 59,525 27 000 82 2090

TandemVibratory Rollers Gross Operating Drum Power Weight WidthModel hp kW lb kg in mm

CB14B 22.5 16.8 3,274 1485 35 900CB14B 22.5 16.8 3,274 1485 39 1000CB22 33 24.6 5,512 2500 39 1000CB24 33 24.6 5,952 2700 47 1200CB24 XT 33 24.6 7,121 3230 47 1200CB32 33 24.6 7,121 3230 51 1300CC24 33 24.6 5,291 2400 47 1200CB34 46 34.1 8,688 3940 51 1300CB34 XW 46 34.1 9,259 4200 55 1400CC34 46 34.1 8,090 3670 51 1300CB434D2 83 62 16,270 7380 59 1500CB434D XW2 83 62 16,711 7580 67 1700CB534D1,2 130 97 23,038 10 450 67 1700CB534D XW1,2 130 97 25,882 11 740 79 2000CB564D 130 97 27,783 12 600 84 21301 Available with Versa Vibe™ option2 Operating weight with cab

19

Generator Set Packages

60 Hz Diesel Ratings

ekW

C4.4 34-100C6.6 114-175C9 ACERT 180-300

ekW

3306B 210-2503406C 275-400C15 ACERT 320-550C18 ACERT 500-600

ekW

3412C 591-800C27 ACERT 680-800C32 ACERT 830-10003512 890-15003516 1450-2500C175 2500-4000

ekW

3606 1375-20003608 1830-26603612 2750-40003616 3660-5320CM32 2765-7450CM43 5240-13 970

Electric Power Generator Set Packages50 Hz Diesel Ratings

kVA

3406C 275-400C15 ACERT 365-550C18 ACERT 545-700

kVA

3412C 680-900C32 ACERT 910-11003512 1000-18753516 1600-2500C175 2500-4000

kVA

3606 1775-26883608 2363-35753612 3550-53753616 4725-7150CM32 3456-9313CM43 6550-17 463

20

Generator Set Packages (cont’d)

50 Hz Continuous Gas Ratings

ekW

Natural Gas Biogas 1500 rpm 1000 rpm 750 rpm 1500 rpm 1000 rpm

G3306 70-110 64-66G3406 125-160 103-106G3412 280-360 163-172G3508 480-510CG132 400-800 400-800G3512 725-1200 770CG170 1200-2000 1200-2000G3516 975-1600 1030-1100G3520 1950-2022 1966G3608 1713-1824G3612 2498-2900G3616 3425-3860CG260 3333-4300 2830-3770G16CM34 6520G20CM34 9700

60 Hz Standby Gas Ratings

ekW

1800 rpm

G3406 150-240G3412 350-450G3516 1040

60 Hz Continuous Gas Ratings

ekW

Natural Gas Biogas 1800 1500 1200 900 720 1800 1500 1200 900 rpm rpm rpm rpm rpm rpm rpm rpm rpm

G3306 85-150 72-75G3406 150-190 132-137G3412 350-375 177-191G3508 360-375G3512 555-570CG132 400-800 400-800CG170 1200- 1200- 2000 2000G3516 1300- 750- 815- 1660 770 1080G3520 1900- 1600 1600 2055G3608 1541- 1642G3612 2335- 2615G3616 3105- 3480CG260 3000- 2530- 4000 3370G16CM34 6520G20CM34 9700

RentalProducts Power Modules

Rating

Towable Generator Sets (60 Hz) 20-400 ekWPower Modules (50/60 Hz) 500-2000 ekWGas Power Modules 1250 ekWTurbines 5200 MW

ElectricalSystems (50 Hz) Uninterruptible Power Supply (UPS) 400 VFlywheel Stand Alone System (SMS and MMS) 150 kVA – 1000 kVAFlywheel Parallel System 250 kVA – 7000 kVA Double Conversion Stand Alone System 60 kVA – 500 kVADouble Conversion Parallel System 60 kVA – 2000 kVA

Paralleling Switchgear

Fully CustomizableBreaker Based – 220V to 15 kVHuman Machine Interface (HMI) ControlsTypical Applications: Emergency Standby Utility Paralleling Load Management

Paralleling Controls

Engine Paralleling and Integration Control (EPIC) Integration ControlsGenerator Set Paralleling Controls (External Circuit Breaker)Human Machine Interface (HMI) ControlsField ExpandableTypical Applications: Emergency Standby Utility Paralleling Load Management

21

Electrical Systems (60 Hz)

Paralleling Controls

Engine Paralleling and Integration Control (EPIC) Integration ControlsGenerator Set Paralleling Controls (External Circuit Breaker)Human Machine Interface (HMI) ControlsField ExpandableTypical Applications: Emergency Standby Utility Paralleling Load Management

Automatic Transfer Switch (ATS)

Contactor Based 600 V Class40 A – 4000 AOpen TransitionClosed TransitionDelayed TransitionBypass Isolation

Breaker Based 600 V Class

100 A – 5000 AOpen TransitionClosed TransitionDelayed TransitionBypass Isolation

Electrical Systems (50 Hz)

Automatic Transfer Switch (ATS)

Contactor Based UL-ANSI Type600 V Class40 A – 4000 AOpen TransitionClosed TransitionDelayed TransitionBypass Isolation

Breaker Based UL-ANSI Type

600 V Class30 A – 5000 AOpen TransitionClosed TransitionDelayed TransitionBypass Isolation

ElectricalSystems (60 Hz) Uninterruptible Power Supply (UPS) 480 VFlywheel Stand Alone System (SMS and MMS) 120 kVA – 1200 kVAFlywheel Parallel System 300 kVA – 8400 kVADouble Conversion Stand Alone System 40 kVA – 225 kVADouble Conversion Parallel System 40 kVA – 800 kVA

Paralleling Switchgear

Fully CustomizableBreaker Based – 220V to 15 kVHuman Machine Interface (HMI) ControlsTypical Applications: Emergency Standby Utility Paralleling Load Management

22

IndustrialPower Systems Diesel

hp kW

C0.5 11.0-13.7 8.2-10.2C0.7 16.4-20.5 12.2-15.3C1.1 18.4-28.2 13.7-21.0C1.5 28.0-40.2 20.9-30.0C1.6 33.0-35.5 24.6-26.5C1.7 31.6-35.0 23.6-26.1C2.2 41.6-66.1 31.0-49.3C3.4 63.0-83.0 47.0-62.0C3.4B 60.3-115.3 45-86C4.4 72.0-111.3 54.0-83.0C4.4 ACERT 82.5-173.5 61.5-129.4

hp kW

C6.6 ACERT 119.3-274.9 89-205C7 ACERT 225-300 168-224C7.1 ACERT 187.7-301.7 140-225C7.1 140-220 105-162C9 ACERT 275-375 205-280C9.3 ACERT 300-350 224-261C11 ACERT 325-450 242-336C13 ACERT 385-520 287-388C15 ACERT 440-595 328-444

hp kW

3406C 361-465 269-347C18 ACERT 575-800 429-597C27 ACERT 800-1150 597-858C32 ACERT 950-1350 708-10073500 Family 680-2100 507-15663600 Family 1998-6598 1490-4920

Gas

hp kW

G3300 Family 95-220 71-164G3400 Family 175-637 131-475G3500 Family 524-1725 391-1286G3600 Family 1775-4735 1324-3531G12CM34 6135-8180 4575-6100

Fire Pump hp kW

C18 ACERT 600-800 447-5973406C 420-482 313-3593412C 538-739 401-5513508 950-1065 709-7943512 1430-1600 1067-11933516 1900-1985 1417-1480

Oil and GasProducts Diesel

hp kW

C2.2 42-66 31-49C4.4 ACERT 72-142 54-106C6.6 ACERT 128-275 95-205C7.1 188-275 144-205C7 ACERT 205-300 153-224C9 ACERT 325-375 242-280C9.3 ACERT 300-350 224-261C11 ACERT 325-450 242-336C13 ACERT 385-520 287-388C15 ACERT 440-580 328-433C15 ACERT 536-540 400-403C18 ACERT 575-800 429-597C27 ACERT 800-950 597-708C32 ACERT 800-1125 597-839C7 Water Cooled/ATEX 205-275 153-205C9 Water Cooled/ATEX 325-340 242-254C32 Water Cooled/ATEX 800-1225 597-9133500 Family 680-2549 507-19013600 Family 2320-7268 1730-5420C280 2320-7684 1661-5730CM20 Family 1530-2901 1140-1710CM25 Family 2410-3620 1800-2700CM32 Family 3620-9650 2700-7200CM43 Family 6760-18020 5040-13 440CM46DF 6030 4500-6750

Gas

hp kW

G3300 Family 95-211 71-157G3400 Family 215-637 160-475G3500 Family 524-1725 391-1286G3600 Family 1775-5045 1324-3762G CM 34 6130-8180 4575-6100

23

PetroleumTransmissions Power Input Torque Weight GearTransmission hp kW lb-ft N·m lb kg Ratios

TH31-E61 350 261 1,148 1556 Straight Through: 4.40, 2.33, 1,855 841 1.53, 1.00, Dropbox 2WD: 0.72, 0.61, 2,755 1250 –3.97 Dropbox 4WD: 2,827 1282TH35-E81 550 410 1,650 2237 Straight Through: 5.73, 3.57, 2,145 973 2.72, 1.95, Dropbox 2WD: 1.43, 1.00, 2,975 1350 0.74, 0.63, Dropbox 4WD: –4.46 3,047 1382CX31-P600 600 447 2,025 2746 Side PTO: 4.40, 2.33, 962 436 1.53, 1.00, Side PTO 0.72, 0.61, with retarder: –3.97 1,024 465 Integral Pump Drive (IPD): 1,101 499 IPD with retarder: 1,163 528 Dropbox 2WD: 1,793 813 Dropbox 4WD: 1,868 847CX35-P800 800 597 2,7002 3661 Side PTO: 5.73, 3.57, 1,410 640 2.72, 1.95, IPD: 1.43, 1.00, 1,540 699 0.74, 0.63,

–4.46CX48-P2300 2300 1715 6,656 9024 3,530 1601 3.34, 2.45,

2.20, 1.81,1.62, 1.36,1.19, 0.99

TH48-E70 1500 1118 4,422 5995 3,735 1694 6.16, 4.52, 3.33, 2.47, 1.82, 1.36, 1.00

TH48-E80 2300 1715 6,656 9024 4,878 2213 3.34, 2.45, 2.20, 1.81, 1.62, 1.36, 1.19, 0.991

TH55-E70 3150 2349 9,530 12 680 6,330 2871 6.25, 4.59, 3.38, 2.48, 1.83, 1.36, 1.00

TH55-E90 3150 2350 9,148 12 403 6,330 2871 4.67, 3.43, 3.03, 2.53, 2.22, 1.85, 1.64, 1.36, 1.00

1 Warm-Up Mode Option: Provides torque converter stall for aiding power train warming during cold starts8F is unavailable on TH48-E80 units configured with the warm-up mode option.

2 Input torque limited to 2,400 lb-ft (3254 N·m) in gears 1F-3F

MarineEngines Propulsion Ratings Generator Set bhp bkW ekW Rating

C1.5 10.0-14.5C2.2 16.0-30.0C4.4 36.0-99.03056 125-205 93-153C6.6 ACERT 93-170C7 250-370 187-276C7 ACERT 455 339C9 142-250C9 ACERT 503-567 375-423C91 217-361 162-269C12 340-600 254-448C12 ACERT 660-705 492-526C18 ACERT 454-1136 339-847 275-550C18 ACERT1 404-806 301-601C32 ACERT 660-1900 492-1417 715-800C32 ACERT1 791-1333 590-9943500 Family 705-3000 526-2237 590-18253500C Series2 775-3386 578-2525 1550-17003512C/3516C 1340-3385 1000-25253512C/3516C2 2442-3179 1821-2368 1730-2250C175-16 2683-2907 2001-2168C280 2320-7577 1730-5650 1650-5200C2803 2320-7268 1730-5420M 20 C Family 1370-2294 1020-1710 979-1468M 25 C Family 2545-4024 1900-3000 1920-2880M 32 C Family 3866-6036 2880-4500 2765-4320M 46 DF Family 7244-10864 5400-8100 5148-7776VM 32 C Family 8084-10731 6000-8000 5760-8448M 43 C Family 8084-12072 5400-9000 5760-8640VM 43 C Family 16096-21461 12000-16000 11520-15360VM 46 DF Family 14487-24145 10800-18000 10368-172801 Auxiliary/Gen set engine2 Auxiliary/Gen set engine/Diesel Electric Propulsion3 Auxiliary

CX On-Highway Transmissions Power Input Torque Weight GearTransmission hp kW lb-ft N·m lb kg Ratios

CX28 425 317 1,350 1830 595 270 3.76, 1.96, 1.35, 1.00, 0.78, 0.65, –3.97

CX31 625 466 1,900 2576 905 410 4.40, 2.33, 1.53, 1.00, 0.72, 0.61, –3.97

CX35 700 522 2,150 2915 1,325 601 5.73, 3.57, 2.72, 1.95, 1.43, 1.00, 0.74, 0.63, –4.46

24

Work Tools

The Reliable ChoiceUsing Cat high quality work tools in combination with your Cat machines gives you the perfect performance match. No matter which attachment you choose from our extensive range, you benefit from: uninterrupted productivity; a single point of contact for all your equipment needs; and the backing of unrivalled parts, service, and vast dealer network. Because they are Cat Work Tool attachments, they provide a high resale value.

As you will see, we offer everything you need to get the job done efficiently and with confidence. Whether you need to cut, rip or tear, sort or load, lift or dig, move or level, pulverize or crush – we have an appropriate solution. Contact your local Cat dealer for the Work Tool attachments available in your area.

AugersAugers are designed for drilling holes

with the right amount of speed and torque for maximum productivity in many soil types. Cat Augers are for use on Cat skid steer loaders, multi

terrain loaders, compact track loaders, compact wheel loaders, mini excavators

and backhoe loaders.

Block HandlingBlock Handling Work Tool attachments are extreme duty tools built for the demands of quarry and block-handling. The complete system is based around a quick coupler and a series of rugged tools designed and manufactured specifically for handling and manipulating large stone blocks.

BackhoesBackhoe attachments are used for digging footings, draining ditches,

utility trenching, maintaining slopes and embankments in a variety of

construction, industrial and landscape settings. They pair well with hammers,

thumbs or augers – extending the versatility of Cat skid steer loaders,

multi terrain loaders and compact track loaders.

BroomsBrooms are ideal for sweeping and cleaning dirt, rock, snow and other debris from streets, parking lots, driveways, sidewalks and factory floors. Several sizes and styles are available for Cat loaders. Water sprinkler kits are available for dust control.

Bale HandlersThe Bale Handler is designed to load,

carry and handle round and square bales of hay, straw, cotton and other

similar materials. This telehandler work tool is ideal for hay handling, feedlot

operations, cattle and horse farms, stables and silage applications.

BrushcuttersBrushcutters are ideal for clearing overgrowth from highway medians, utility easements and for initial land clearing for housing, parks and recreational areas. The Cat Brushcutter line is intended for use on Cat skid steer loaders, multi terrain loaders and compact track loaders.

BladesCaterpillar offers a wide variety of

blade styles including coal, woodchip, landfill, reclamation and cushion dozer – enhancing the machines productivity

in many different industries and situations. Every Cat Blade is designed

to perfectly match the machine’s configuration, extending your effective

boundaries of operation.

Excavation BucketsCat Excavation Buckets are designed to load easily and efficiently for the best production. Standard, specialty and front shovel buckets are available for excavating, trenching, finishing, and loading in a variety of conditions.

25

Loading BucketsBecause every Cat Bucket is designed

to perfectly match the machine configuration, you are guaranteed

top performance. Choose from a wide range of purpose-built, high

performance buckets. From the smallest skid steer loader up to the largest wheel

loader, each is designed for superior productivity, high reliability and

long life in a variety of materials and handling conditions.

CWAC Auto-Connect Quick CouplerCaterpillar’s Auto-Connect hydraulic coupler automates tool exchange fully, so operators can change work tools automatically from the safety and comfort of their cabs. They simply disconnect one tool and pick up the next. It’s the fastest, most efficient way to switch tools while on the job. And the integral design is typically Caterpillar, preventing ruptured hoses and oil spills and cutting out manual intervention. The new Cat Auto-Connect works on all major makes of excavator. Get more out of your operators and your vehicle assets, every working day.

Cold PlanersCold Planers are primarily used to

economically restore asphalt and concrete surfaces in small residential

and commercial paving jobs. They are also ideal for milling imperfections

prior to resurfacing and removing deteriorated pavement when the use of dedicated planers is limited. They are designed for use on Cat skid steer and

multi terrain loaders, compact track and wheel loaders and backhoe loaders.

CAG InterfaceFor machines that are equipped with CW quick coupler that are to be used in combination with a free hanging Grab like GSH, GGS and GSM the CAG is the interface to attach these grabs to the machine.

The CAG consists of a frame that fits to the CW coupler and allows the grab to be attached to the suspension bush that has the same width and machine-pin hole diameter as is in the machine stick nose.

Drum CompactorsVibratory Drum Compactors are used

for compacting soil, sand or gravel prior to pouring concrete or laying

asphalt surfaces. They are also ideal for asphalt patch work. This compactor

style is designed for use on Cat skid steer and multi terrain loaders, compact

track and wheel loaders.

CTV Transfer GrabTransfer grabs are designed to transfer loose materials such as sand, gravel, coal, corn, etc. from ships and trucks.

Plate CompactorsWhen in a trench or on a slope, driving

sheeting or posts, Cat Compactors are the ideal choice for any compaction

task. Vibratory Plate Compactors are performance matched to backhoe

loaders and excavators.

GGS Digging GrabsThe Digging Grab (GGS) of today is the improved version of the Digging Grabs that already have proven their value in several countries for many years. These custom released work tools support the marketing of Cat Excavators and offer an operational solution in the form of three standard Grab configurations.

Quick CouplersCat Quick Couplers increase the

machine’s flexibility and versatility by enabling rapid changeover of

Work Tool attachments – keeping a single machine highly productive.

Couplers are available for loaders, excavators and backhoes.

Quick coupler styles available vary by region.

GSM Scrap GrabCaterpillar Work Tools has extended its product portfolio with the release of Cat branded Orange Peel Grabs with vertical cylinders (GSM).

The GSM Orange Peel Grapples are designed for handling scrap and waste, for loading and unloading ships and trucks, etc. The GSM grab forms an excellent match with Cat and Non-Cat material handling excavators.

26

Forestry GrapplesForestry Grapples for forest machines feature 360° rotation and can be quickly positioned for maximum productivity. Cat Forestry Grapples are built using high-strength steel throughout the body and tines, reinforced in key areas to maintain structural integrity. Grapples for knuckleboom loaders deliver outstanding performance in all types of logging and material handling. A wide range of sizes are available.

Orange Peel GrapplesContinuous 360° rotation gives an excavator operator full control to position the grapple around the scrap and other material swiftly and precisely. A covering guard facilitates easy access to the cylinders, which are housed within the tines for maximum protection. Choose from 4- or 5-tines in range of capacities sized for use with small and medium material handling excavators.

HammersWorking a Cat Hammer is as comfortable for the operator and those around the job site as possible. A sealed, sound-suppressed housing protects the power cell and significantly reduces sound levels. A variety of sizes and tool options make Cat Hammers the ideal choice for concrete demolition, breaking rock and frozen or hard ground, and trenching.

Hammer models available vary by region.

Felling HeadsFelling Heads for wheel and track feller bunchers are designed for optimum performance in severe harvesting conditions. Felling Heads for track feller bunchers feature robust structures, thick plating and reinforcements in high stress areas for best in class durability. With partial or full tilt, these heads optimize cutting and bunching capability and increase production. Felling Heads for wheel feller bunchers include shear heads and high capacity bunching saws with tapered saw shaft and bearing design. They are made of abrasion-resistant materials to maximize durability.

Harvester HeadsHarvester Heads are field proven in multiple applications around the world. These Heads can be matched with track harvesters, wheel harvesters and forest machines to meet many different terrain and environmental requirements while providing optimum performance.

CrushersThe P300 Multi-Functional Crusher rips concrete out of fixed structures,

cuts steel reinforcement rods and pulverizes concrete up to almost 1 m

(39 in) thick. A universal 360° rotator head enables rapid positioning, while wide jaws, specially positioned teeth

and integral speed valve mean you can crush and cut with great force while

reducing cycle times.

Forestry ForksSeveral fork types are available

for heavy duty applications found in forestry sites and mill yards.

Logging, Millyard, Grapple and Lumber forks are available for loading and unloading trucks,

decking and feeding the mill, to handling and sorting lumber, logs

and palletized material.

Pallet ForksMany Pallet Fork sizes are available

to equip the smallest to largest machines to move and handle all types

of material. From bulky, palletized material found on most every

construction site to bagged fertilizer and seed on landscaping and nursery

sites – Pallet Forks are some of the most versatile tools.

Grapple Buckets, Forks and RakesGrapple Buckets, Forks and Rakes are

designed to handle bulky materials. They are built for compact track

and multi terrain loaders, skid steer loaders, compact wheel loaders and

telehandlers. Utility grapple buckets, forks and rakes are for handling light

materials while industrial grapples are for heavy duty usage.

Demolition and Sorting GrapplesIt’s easy for an excavator operator to precisely position the grapple around

the target material with the Demolition and Sorting Grapple’s 360° rotation.

You work fast with full control. The powerful closing force of the grab shells combined with rapid open- and

closing-times speed up cycle times – so you can shift more tons per hour.

27

Material Handling ArmsThese tools equip Cat loaders and

telehandlers for moving, manipulating and placing pipe, precast concrete

structures, small equipment and other similar items with maximum visibility

and control. They are well suited for loading, carrying and setting trees and

large shrubs in landscaping.

MulchersFor high performance cutting,

mulching vegetation and undergrowth from typical wooded terrain – this

attachment reduces saplings, shrubs and trees into mulched material. A rugged

head processes trees up to 200 mm (8 in) in diameter for effective land

clearing. This Work Tool attachment is designed for use on compact track

and multi terrain loaders and skid steer loaders.

Multi-ProcessorsA Multi-Processor takes your excavator

to even higher levels of versatility. Consisting of a housing and jaw set

(with six jaw options available), it gives the flexibility to choose the right

jaw set for any cutting and crushing application in most any material found

on the scrap and demolition job site.

PulverizersSecondary Pulverizers fine-crush

concrete and concrete blocks resulting from site demolition. Wide jaws with

pick-up tips and numerous teeth, a large opening, reversible cutting edges

and rapid closing time helps reduce the largest possible amount of on-site concrete in the shortest possible time.

Landscape RakesThis rake style uses hardened

teeth to pulverize, aerate, level and condition the soil – while collecting and depositing rock and debris in an

integrated hopper bucket for quick removal. These rakes are designed

to operate with the loader in reverse, leaving the soil finely groomed with

minimal compaction.

Loader RakesCat Loader Rakes feature fabricated steel teeth for strength and a long service life in land clearing, stump removal, and boulder and large tree moving. Heavy duty styles with shorter teeth and more robust design are ideal for working in clay and other heavy soils. Rakes are available with or with a top clamp for wheel and track loaders.

Power Box RakesThis one work tool for compact track and wheel loaders, multi terrain loaders and skid steer loaders de-thatches, removes old lawns and weeds; grades, levels, rakes, removes debris; and prepares seedbeds. Angling ability allows the operator to windrow debris for easy pickup and removal.

RippersWith its powerful, single point of penetration, Cat Rippers are effective at breaking out rock and other difficult materials. Using it with a compatible quick coupler and rock bucket for “rip and load,” you can supplement or even leave out blasting rock prior to truck loading.

SawsWheeled Saws are designed for high-performance trench cutting on a variety of hard or compact surfaces like asphalt, reinforced concrete and rocky or frozen ground. They are compatible with compact track and multi terrain loaders, skid steer loaders, and compact wheel loaders.

ShearsFull, 360° continuous rotation in both directions allows the shear to position the jaws precisely for cutting common metals found in scrap yards and building structures. A piercing tip, unique jaw design, and fully reversible blades keep the shear highly productive in scrap yards and on demolition sites.

28

Snow BlowersCat Snow Blowers utilize a two-stage

auger and impeller design to move a greater capacity of snow quickly and efficiently. Snow Blowers are

compatible with compact track and multi terrain loaders, skid steer

loaders, and compact wheel loaders. They are designed for removing snow

from streets, parking lots, driveways and sidewalks.

Stump GrindersDesigned to economically remove stumps in residential, commercial

and agricultural settings – Cat Stump Grinders offer increased production

over tow-behind grinders in situations where multiple stump removal is

required. They are compatible with compact track and multi terrain loaders,

skid steer loaders, and compact wheel loaders.

TillersTillers are designed for breaking

up and pulverizing soil, mixing compost or other material into

existing soil, stabilizing and leveling existing terrain in landscape finish

applications. Cat Tillers are compatible with compact track and multi terrain

loaders, skid steer loaders and compact wheel loaders.

TrenchersCat Trenchers are designed for use on compact track and multi terrain loaders, skid steer loaders and compact wheel loaders – allowing these machines to cut narrow straight trenches in soil for laying electrical, telephone and cable lines, or water and gas pipe.

Truss BoomsTruss Booms for telehandlers are designed to lift and place items like roof trusses, frames, beams as well as equipment. The truss boom, with its added horizontal and vertical reach, allows for materials and equipment to be placed in hard to reach areas.

WinchesBoom head mounted Winches are available for telehandlers for lifting long, awkward loads that cannot be handled safely on a pallet and/or materials that need to be lowered below grade.

29

Technology Products

Technology products enable your Cat machines and entire equipment fleet to be more productive, help you manage your assets and monitor equipment health. The products listed below are all available from your Cat dealer as factory fit, attachment ready option, or an aftermarket solution. Contact your Cat dealer for specifics on machine model configurations.

Technology Product Family Description

AccuGrade™ Control Systems

AccuGrade Grade Control Systems simplify your grading operation, enabling you to complete site prep work faster, easier and more efficiently. Positioning and guidance technologies, machine sensors, and automatic blade control capabilities, combined with in-cab conveniences such as digital design plans, real-time cut/fill data, and guidance indicators, enable operators to work more confidently and achieve greater accuracy, in fewer passes, using less material. From simple 2D grades and slopes to complex 3D designs, AccuGrade delivers the information and control operators need to stay on grade, improving accuracy and productivity up to 50 percent. Grade stakes and checkers are minimized, making the work site safer, more efficient, and more cost effective. Dealer-installed only. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

AccuGrade Compaction Control Systems enable operators to achieve compaction faster, in fewer passes. Compaction mapping data can be stored and retrieved for validation and recordkeeping.

Cat Compaction Control Cat Compaction Control begins with compaction measurement information (e.g., soil stiffness measurement) and can be enhanced with GPS/UTS mapping systems. These capabilities improve work quality, lower owning and operating costs, reduce manpower, and optimize productivity.

Cat Grade Control Cat Grade Control is a factory installed system that combines traditional machine control and guidance with machine hardware and software to improve productivity, usability, reliability, job site safety and machine value. By integrating the system into Cat machine hydraulics, sensors and cylinders, customers are able to save valuable time and money over installing an aftermarket grade control system.

Command for Dozing Command for dozing enables remote operation from a safe location away from the machine. Removing operators from the cab of a machine working in hazardous conditions promotes safety and reduces operator exposure to dust, noise and vibration. The operator console is a portable, over the shoulder unit that enables line of sight remote operation of the machine. Operating range is approximately 400 meters depending on the radio frequency selected. Terrain’s avoidance zone functionality (optional) can be utilized to further enhance safety.

Command for Underground Command for underground is designed to enhance safety and boost operator efficiency and effectiveness. The system allows the operator to work from a safe and ergonomic work station far from the Load Haul Dump (LHD) machine – either on the surface or underground without sacrificing machine productivity. The system can also have a significant impact through increased machine availability, decreased operating costs and extended machine life.

CAES for Industrial & Quarry CAES delivers real time productivity information to machine operators in quarry and industrial applications. An in-cab display delivers accurate cut and fill information to ensure proper grade control of stockpiles and effective removal of overburden or targeted materials. Instant feedback warns the operator when 2D and 3D avoidance surfaces and zones have been breached to keep operators safe. RCAES for CAES for Industrial & Quarry real-time productivity data can be viewed from the office, enabling management to remotely plan and manage the operation, better manage machine and operator utilization, optimize fuel usage, and maximize production. CAES provides detailed reports and collects multiple data points for record keeping and validation.

CAES for Landfills CAES for Landfills takes the guesswork out of landfill operations by delivering productivity information to the cab to indicate when target compaction has been achieved. The system uses positioning and guidance technologies and an in-cab display with a color-coded topographic map with real-time compaction data to show the operator where they need to work for optimum waste placement and compaction. It also provides guidance for proper cover soil placement to optimize coverage and soil usage. CAES eliminates over and under compaction, reducing costs, and minimizes airspace consumption, extending the life of the landfill. Mapping data can be stored for reporting, record keeping and air space validation.

Detect Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.

Object Detection uses a combination of cameras, radars and a touch screen display to identify objects in close proximity at machine startup and slow speed operation. The display has proximity bars that indicate approximate distance to an object, providing enhanced operator awareness around the machine.

Proximity Awareness provides complete coverage by utilizing GNSS to warn operators of nearby equipment and light vehicles whenever the machine is in operation. The on-board system, coupled with the office software, enables mine management to recognize hazards, define avoidance and speed limit zones, and capture events for future playback in the office.

30

Technology Product Family Description

Fleet Fleet is a comprehensive mine management system featuring an advanced truck assignment engine, health and operational event alarming, “what-if” analysis, productivity tracking, machine tracking, material management and a comprehensive reporting package. Integrating with other Cat MineStar™ System capability sets, Fleet improves productivity by 10-15%, eliminates misdirected loads, improves information availability and provides greater flexibility to adjust for changing mine and market conditions.

Health Health enables real time and batch monitoring of fleet-wide, critical health and operating parameters. By recording information from on-board monitoring systems like VIMS™ and making it available in a comprehensive reporting package, Health helps customers and Cat dealers identify maintenance and operational issues to improve machine and fleet availability.

Payload Control System Payload Control System helps take the guesswork out of loading operations with on-the-go load weighing to optimize performance and productivity. The system is fully integrated into the machine and existing display so it’s reliable, and ready to work from the factory. Accurate payload information is delivered to the in-cab display so the operator can deliver exact loads, every time. Real-time feedback enables the operator to improve efficiencies by eliminating trips to the yard to add or remove material, and eliminate costly customer fines from overloaded delivery trucks.

Product Link™ Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface, powered by Trimble. Knowing where your equipment is, what it’s doing and how it’s performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity, and lower operating costs. (Cellular or satellite communications configurations available.)

(Product Link licensing not available in all areas. Please consult your Cat dealer for availability.)

Terrain Terrain enables high-precision management of drilling, dragline, grading and loading operations through the use of guidance technology. It increases machine productivity and operator efficiency by providing real-time feedback.

Terrain for drilling increases hole placement and depth accuracy while removing the cost of drill pattern survey and staking. Position and status information of other drills working on the same pattern is provided to operators in real time on the in-cab display.

Terrain for draglines enables production monitoring of all dragline activities, right down to individual bucket loads and dump locations. Machine performance, productivity and payload are monitored and organized in reports to optimize dragline output and minimize operating costs.

Terrain for grading and loading help maximize machine efficiency by controlling grade, and monitoring ore bodies, bench height, cycle times, and volume of cut and filled material.

VIMS™ VIMS uses sensors that are deeply integrated throughout the machine’s brake, transmission and engine systems to constantly provide intelligent data and insight into every aspect of your machine’s condition. The system alerts operators of abnormal machine conditions in real-time and provides instructions if action is needed. Data, such as historical trends, histograms, abnormal events and more can to be transferred wirelessly or manually to the office for off-board analysis. Predictive analysis tools (VIMS PC, MineStar™ Health) analyze and interpret the data and provide actionable reports give you insight into necessary maintenance and repairs so you can proactively manage your fleet, maximize machine availability and uptime, and make your operation more productive and profitable.

(Available data varies by machine model and type.)

Please see your Cat dealer for specific model, region availability and application information.

31

Product Family

Acc

uGra

de

Cat G

rade

Co

ntro

l

Cat C

ompa

ctio

n Co

ntro

l

Com

man

d

CAES

Det

ect

Flee

t

Hea

lth

Prod

uct L

ink

Terr

ain

VIM

S

Articulated Trucks ✔ ✔ ✔ ✔

Asphalt Compactors ✔ ✔ ✔

Asphalt Pavers ✔ ✔ ✔

Backhoe Loaders ✔

Cold Planers ✔ ✔

Draglines ✔ ✔

Drills, Rotary ✔ ✔

Drills, Track ✔

Excavators ✔ ✔ ✔ ✔

Excavators, Demolition ✔ ✔

Excavators, Mass ✔ ✔ ✔ ✔ ✔

Excavators, Mini ✔

Excavators, Wheel ✔ ✔

Feller Bunchers, Track

Forest Machines ✔

Industrial Loader ✔ ✔

Integrated Toolcarrier ✔

Landfill Compactors ✔ ✔

Longwall Mining, CST Drives ✔

Longwall Mining, Plow ✔ ✔

Longwall Mining, Roof Support ✔ ✔

Longwall Mining, Roof Support Carrier

Longwall Mining, Shearer ✔

Material Handlers, Track ✔

Material Handlers, Wheel ✔

Mining Trucks ✔ ✔ ✔ ✔ ✔

Motor Graders ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Multi Terrain Loaders ✔ ✔

32

Product Family

Acc

uGra

de

Cat G

rade

Co

ntro

l

Cat C

ompa

ctio

n Co

ntro

l

Com

man

d

CAES

Det

ect

Flee

t

Hea

lth

Prod

uct L

ink

Terr

ain

VIM

S

Off-Highway Trucks ✔ ✔ ✔ ✔ ✔

Pipelayers ✔

Pneumatic Compactors ✔ ✔ ✔

Rock Flow Haulage System

Room and Pillar, Continuous Miner ✔

Rotary Mixers ✔

Shovels, Electric Rope ✔ ✔

Shovels, Hydraulic ✔ ✔

Skid Steer Loaders ✔ ✔

Skidders, Wheel ✔

Soil Compactors ✔

Telehandlers ✔

Towed Scrapers ✔

Track Loaders ✔ ✔ ✔

Track Loaders, Compact ✔ ✔

Track-Type Tractors ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Underground Articulated Trucks ✔ ✔

Underground Load/Haul/Dump ✔ ✔ ✔

Vibratory Soil Compactors ✔ ✔ ✔

Vocational Trucks ✔

Wheel Dozers ✔ ✔ ✔ ✔ ✔ ✔ ✔

Wheel Loaders ✔ ✔ ✔ ✔ ✔ ✔ ✔

Wheel Loaders, Compact ✔

Wheel Tractor Scrapers ✔ ✔ ✔ ✔ ✔

33

Notes

34

Notes

35

AEXQ0963 (02-13) © 2013 Caterpillar All Rights Reserved Printed in U.S.A.

Materials and specifi cations are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.

For more complete information on Cat products, dealer services and industry solutions, visit us on the web at www.cat.com

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Date post:	02-Jan-2019
Category:	Documents
Upload:	duongnhi
View:	213 times
Download:	0 times

2013 Product Line Brochure -...

Documents