Date post: | 05-Jul-2015 |
Category: |
Automotive |
Upload: | kamar-zinoun |
View: | 179 times |
Download: | 0 times |
®
www.faar-industry.com
Electronic Automotive Systems
®
2
FAAR Industry is specialized in the development of electronic embedded systems,from prototyping to low volume production programs.
FAAR Industry also supports its customers on their own developments whileproviding a range of specialized products and services.
FAAR Industry’s offer is based on three axes:
1. Tools & off-the-shelf product offer for development and prototyping :ECU, Tools, CAN and LIN interfaces, Displays
2. System offer: OEM for low volume production programs
3. Engineering services from our R&D department or on customer site
Engineering services on customer site or in our R&D department
Training & engineering support on shelf products
FAAR Industry’s offer
®
3
1. Tools & off-the-shelf products :
Electronic Control Units
Development and prototyping tool chain
CAN and LIN interfaces
Programmable displays
FAAR Industry’s offer
®
A range of ~40 ECUs references available
5 housings:
• 24 pins – S12
• 48 pins – MCP555, MPC563
• 70 pins – S12
• 112 pins – MPC 5554
• 128 pins – MPC565
HCM 0563 048 0801 - - -
Model
Number de Pins
Microprocessor
ECM: Engine Control Module - Gasoline
GCM: General Control Module
HCM: Hydraulic Control Module
PCM: Powertrain Control Module
ECUs available both in
development and production
versions
Off- the-shelf products : Electronic Control Units
4
®
5
MotoHawk®
MotoHawk is a set of Simulink libraries enabling engineers to work on the whole ECU range and develop real time control strategies:• Target definition (~40 available)
• CAN drivers and communication protocol (CCP)
• Drivers (freq, PWM, DG, AN, encoder, EST, INJ, ...)
• Diagnostic block set
• Engine synchronization
• Real time and multi task core
• ….
MotoTune®
MotoTune is a calibration tool:• SW flashing,
• Data measurement
• Calibration.
Off-the-shelf products : Development and prototyping tools
®
CAN - WirelessEasy to plug in a vehicle to communicate with ECUs
CAN – USB & LIN - USBRugged modules enabling wire communication between a PC and the ECU
Very good quality/price ratio
CAN – USB dataloggerEasy to use: “plug and play”Used although for CAN USB real time communication deviceData recorded on memory SD Card (up to 16 Go)
CAN – LIN Gateway6
Off-the-shelf products : CAN and LIN interfaces
®
7
Off-the-shelf products : EASY CAN Software
FAAR Industry provide s EASY CAN softwarewhich differentiates by its business model(License is linked to the interface) and itssimplicity.
It is an intuitive CAN network interface andanalysis tool dedicated to Kvaser CANhardware. For daily use, EASY CAN offerspowerful basic functions for beginners as wellas extensive detailed functions forexperienced users.
EASY CAN also includes advanced analysistools.
®
8
Human Machine Interface (HMI) development tool: Projektor, Qt Creator C++
LCD displays from 4” to 12”- High definition
Communication: CAN, RS232, USB
Automotive housing
Protection: IP 67 and IP 65
Processors:
Freescale I.MX35®, 532 MHz for A3/A6
Freescale i.MX6®, 800 MHz for A8
Memory:
128 Mb on A3/A6
512 Mb on A8 (possible extension to 1 Gb)
Off-the-shelf products :Embedded displays
®
9
2. System offer: OEM for low volume production programs:
Development methodology
Application examples
FAAR Industry’s offer
®
Model based design and
Multi-Target code generation
ECU target description
Implementation of existing drivers
Applicative SW specification and development
Simulation and validation of SIL & MIL models
Real time SW validation on ECU
Test and validation HIL
Production SW process (Flashing, testing and labelling)
OEM : Methodology Simulink
Stateflow
MotoHawk
RTW / Embedded coder
GHS Multi
GCC & Code Warrior
MotoHawk
Compatibility:
MotoTune, Inca,
CANape, Vision
CCP, ERI, …
MotoTune :
Flash, tune, measure,
record data measured
ControleCore:
Low layer framework
Tuned for the ECU target
V cycle
development
methodology with
MotoHawk and
automatic code
generation
10
®
11
Production program management:
Receipt of blank ECUs
Mounting HW installation
Average stock building
ECU flashing
Flashed ECU Testing
ECU Labeling
Conditioning
Shipment
OEM : Methodology
®
12
2. System offer: OEM for low volume production programs:
Development methodology
Application examples
FAAR Industry’s offer
®
13
OEM application example: Hybrid powertrain system development
Customer need: Management of indirect injection on 2 cylinders, 4-stroke-engine for hybrid application.
100% implemented with our development and code generation tool chain MotoHawk®
Control strategies development: Positive and negative torque, Electric, hybrid and thermal modes
Coupling of thermal engine and electric motor
CAN network management
Hybrid system management
13
®
14
OEM application example: Gasoline engine management for
test bench application
Customer need: Realize engine tests with open ECU
Characterization of existing components (injector, spark, vrs signal etc...)
Adding components to reduce development time (Air flow meter, wide band O2 probe)
Development of a specific encoder Development of the engine management for test
bench
Implementation of the engine control on prototype ECU
Implementation of prototype harness Engine start on test bench
Training on MotoTune calibration tool
Functional specification
SW specification
Architecture conception
Coding
Unit tests
Tests & Integration
Validation & Delivery
Prototyping
®
OEM application example: Development of an Electric Vehicle
supervisor
The system is based on our ECU: ECM– 112 pins
100% implemented with our model-based and code generation tool chain MotoHawk®
Supply of packaged engineering and expertise on customer site
Fast and reliable development: 6 months
Full customer satisfaction on all aspects : Tools/Training ECU Engineering service (development)
15
®
16
OEM application example: Transmission control development
Customer need: Drive rear axle transmission lock/unlock system with an ECU.
Customer specification improvement
Characterization of unspecified sensors
Development of the control strategy on prototype ECU
Prototype ECU delivery with a calibration interface
Sensor diagnostics implementation
Delivery of flashed and calibrated production ECUs
Simulink Stateflow
Motohawk
RTW / Embedded coder
GHS MultiTLC manage code
generation
Mototune :Flash, tune, measure, record data measuredInca, CANape, Vision
ControleCore low layer framework
Tuned for the ECU target
CCP, ERI, …
16
®
17
3. Engineering services
Engineering services:
On customer site
From our R&D department
Training & engineering support on off-the-shelf products
FAAR Industry’s offer
®
FAAR Industry provides high value added engineering services in its field ofexpertise, Electronic embedded systems, with positions such as:
Project Manager
Lead / Coordination Engineer
Customer Requirement Capture Engineer
System Engineer
Electronic Architecture Engineer
Specification, Development, test and validation Engineer
…
Engineering services
18
®
FAAR Industry provides specialized engineers’ competences. Depending oncustomer need, our engineer can intervene with MotoHawk tool chain.
“Packaged” engineering services
«Packaged » service type Advantages
On customer site The opinion and/or presence of experienced engineers to support our customers in their key technical choices and carry through their projects.
From FAAR Industry’s
R&D department
Specialized competences in embedded sytems to fulfillcustomers’ requirements
Permises and efficient tools if needed
19
®
20
FAAR Industry’s offer
2. Engineering services
Engineering services:
On customer site
From our R&D department
Training & engineering support on off-the-shelf products
®
FAAR Industry provides training sessions and technical support on the followingtools and methodology:
MotoHawk: Development and prototyping tool
MotoTune: Measurement and calibration tool
Projektor: Human to Machine Interfaces development tool for OPUS displays
Model Based Design: Development Methodology
Training and Support
21
®
22
Training and Support: Training and support Formula 1
Customer need: Development tool chain (soft & hardware) to implement Kinetic EnergyRecovery System (KERS) for 2009 season.
Set up of the development tools on site
Local team training on MotoHawk, MotoTune
Support MotoHawk, MotoTune use
Specific developments: Boot loader compatible with the
vehicle environment
Calibration interface compatible with customer’s calibration files
22
®
Customer references
23
®
www.faar-industry.com
Thank you for your attention
25
FAAR IndustryParc du Moulin de Massy
43, rue du Saule Trapu91300 Massy
Tel: 01.69.09.41.41Fax: 01.69.09.45.05
www.faar-industry.com