Head OfficeTel.: +968 2450 3915 Fax: +968 2450 3920
PO Box: 1827, P.C. 130, Al Athaibah, Sultanate Of Oman
Salalah ShowroomTel.: 968 2313 2915 Fax: +968 2313 2915
Shop No. 13 & 14, Near Al Mawasa ClinicSenaiyya, Salalah, Sultanate of Oman
Electrical
Instrumentation
Oil & GasLighting
2014CATALOGUE
2014 CA
TALO
GUEMechanical
ww
w.tecsintl.com
Sohar ShowroomTel.: +968 2675 3006 Fax: +968 2675 3007
PO Box: 505, P.C. 322, Falaj Al QabailSohar, Sultanate of Oman
01
02
To build market shares by diversifying in the areas of Electrical, Lighting, Instrum-entation, Mechanical and Oil & Gas products that cater to industries and localbusinesses and provide clients with cost effective solutions for all their productneeds.
5
ISO 9001:2008 CertificateQuality Policy
03
Technical Supplies International Company LLC (TECS) aims atdiversifying its business in the areas of Electrical, Instrumentation,Lighting, Mechanical (Utilities) and Oil & Gas (Mechanical)products that cater to industries and business, within theSultanate of Oman & across Middle East
Electrical Division
Electrical ProductsCable Support SystemsGI Conduits & AccessoriesFlexible ConduitsCables & WiresCable Lugs & GlandsCable TiesLow Voltage Control & Switchgear PanelLV Switchgear ComponentsMotors & VFDsAC UPS & Battery ChargersEarthing & Lightning Protection SystemsElectrical Plugs & SocketExplosion Proof ProductsElectrical Safety Products
04
0509101214151619232426283034
Page No.
Cable Support Systems
05
GRP
GRP
Cable Tray & Accessories
Cable Ladder & Accessories
06
Cable Support Systems
Cable Support Systems
07
Cable Support Systems
08
GI Conduits & Accessories
09
Conduits
Pre Galvanized
Hot Dipped Galvanized
Size 20mm to 40mm
Accessories
1, 2, 3 & 4 Way Round Junction Boxes
Saddles
GI Square Boxes
Short & long Nipples
Ball Sockets
End Plugs
Flexible Conduits
10
Flexible Conduits
11
F
F
Cables and Wires
BSEN 50525-2-31
300
PVCwires
As
12
/ BS 6328
/ Heat Reistance Cables
Cables and Wires
High Temp
Size: 1.5 sqmm to 630 sqmm
13
Rubber Flexible Cable
Instrumentation Control & Data Cables
sq mmsq mm 185
/OES-II3.3/11/33/66 kv
132/220/400 kv
Marine & VFD Cables
Cable Lugs and Glands
1. Cable Glands: Safe Area & Ex-Proof Type
2. Copper Cable Lugs
d Material: PVC, Brass, Nickel Plated Brass, Stainless Steel
14
Cable Ties
15
Generator Control / Synchronising /AMF Panels: Applications: To Controll Generator Operation / To synchronize multiple Generator sets onto a common bus / To provide automatic changeover between two or more electrical sources.
Panel assemblies in conformance with requirements of IEC 61439-1 & 2 for LV Switchgear Assemblies
Street Lighting PanelsApplications: Automatic switching ofstreet lighting.
Main Distribution Boards (MDB's)
Applications: Protection of whole Low Voltage Electrical Power Networks connected to a power source.
Panel assemblies in conformance with requirements of IEC 61439 - 1&2 for LV Switchgear Assemblies.
Authorized Panel Builders of ABB for current rating upto 4000A
Sub Main Distribution Boards (SMDB's)
Applications: Protection of Low Voltage Electrical Power Networks downstreamfrom Main LV Panels
Panel assemblies in conformance with requirements of IEC 61439-1 & 2 for LV Switchgear Assemblies
Low Voltage Control & Switchgear Panel
16
Low Voltage Control & Switchgear Panel
Automatic Power Factor CorrectionPanels (Capacitor Panels) :
Applications: Improvement of power
networks to Eliminate wastage in Electricity Consumption.
Final Distribution Boards (FDB's)
Applications: Final Distribution of Electrical Power to various loads in Consumers premises.
17
Motor Control Centre - Fixed and Drawout Type
Applications:Control of Motors through various methods.
Panel assemblies in conformance with requirements of IEC 61439-1 & 2 for LV Switchgear Assemblies
Feeder PillarsApplications: Distribution of ElectricalPower to Consumers by Utilities.
Metering PanelsApplications: Tari Metering of ElectricalPower to Consumers.
Low Voltage Control & Switchgear Panel
18
LV Switchgear Components
ABB Air Circuit BreakerType : Emax E1 to E6Operating Voltage : up to 690V ACCurrent Rating : 250A to 6300ANo. of Poles : 3 & 4Breaking Capacity : 42 kA 150 kA at 415VVersion : Fixed & WithdrawableProtection release : Microprocessor-basedrelease offering protection, measurement andcommunication functions.
ABB- MCCB Formula Series up to 630AType : Formula Series A1 to A3Operating Voltage : up to 690V ACCurrent Rating : 16 A to 630ANo. of Poles : 1, 2, 3 & 4Breaking Capacity : 10 kA 50 kA at 415VVersion : Fixed Type
ABB MCCB TmaxType : Tmax T1 to T7, Formula Series up to 630AOperating Voltage : up to 690V ACCurrent Rating : 16A to 6300ANo. of Poles : 3 & 4Breaking Capacity : 16 kA 150 kA at 415VVersion : Fixed & AdjustableProtection release : Microprocessor-based releaseoffering protection, measurement andcommunication functions.
ABB-Contactors (Block, Mini & Bar Mounted)AC Operated 3P 9A 300A AC3 Rating.AC/DC Operated 400A 1050A AC3 rating.AC Operated 4P 25A 1000A AC1 Rating.AC/DC Operated 2050A AC1 Rating.Mini Contactor Low Switching burden in bothPower and Auxiliary.Bar Mounted Contactors from 63A to 4000A in2, 3 and 4 Pole.Accessories for all above.
19
LV Switchgear Components
ABB- Thermal Overload Relay, Electronic Product & Relay
Thermal Overload Relays 0.16A 400A
Electronic Overload relays 0.16A 1250A
Electronic Timers
Measuring & Monitoring Relays
Switching Power Supplies
Safety Relays
Pluggable Relays
Analog Signal & Serial Data Converters
Special Terminal Blocks
Accessories for all the above
ABB Switch Fuse Unit, Change Over Switch &Switch Disconnector
Front Operated Switch Fuse Units
No. of Poles : 3 & 4
BS & DIN versions
SFU Current Rating : 32A - 1600A
Switch Dis-connector rating from 16A - 3150A AC23 rating.
No. of Poles : 3 & 4
Changeover Switch current rating from 16A 1600A
No. of Poles : 3 & 4
Accessories for all the above
ABB Manual Motor Starter, DOL and Star Delta Starter
MMS current rating from 16A to 3150A AC23 duty.
No. of poles : 3 & 4
DOL Starter up to 10 HP
Start Delta Starter up to 250 HP in sheet steel enclosure.
Wide Band Coil to take care of voltage fluctuation.
Accessories for all the above.
20
LV Switchgear Components
ABB Soft StarterType : PSS, PSR PSE, & PST (B)Operating Voltage : up to 690V ACCurrent Rating : 3A to 1810A Protection release : Microprocessor-based, AdvancedIntegrated Protection,Flexible bus Communication system,LCD Display, Programmable signal relays, Torque Control,option with bypass contactor.
ABB - Line Protection DeviceMain product lines:Miniature circuit breakers (MCBs)Residual current devices (RCDs), RCCBs, RCBOsSurge Protection Devices, IsolatorTimers, Twilight Switches, Photo Sensors.Modular DIN-rail componentsAccessories for connection and Installation
21
LV Switchgear Components
BW Series PVC Enclosure, IP65 from 16A to 125A, SPN, TP+N & 4POT Series Sheet Steel Enclosure, IP65 from 16A to 1600A, TP+N & 4P
ABB Weather Proof Isolator
ABB Distribution Board 4Way, 6Way, 12 Way
22
Motor & Drive Systems
Inverters That are Friendly toBoth Power Sources and Motors
MV Inverter up to 11kv
Motors
The MV Inverter can be appliedto existing high voltage motors atvariable speeds
Motors can cater to every need, includingultra-large capacity motors in the 100,000kWclass and ultra-speed motors of morethan 10,000 rpm
A broad lineup 3.3kV: 200 - 5700kVA 6.6kV:400~11400kVA (the highest class in the industry) 11kV: 660~19500kVA
Control methods can be chosen for uses to best fit the applications Sensor-less control for energy-saving uses, such as for fans and pumps, Vector control for constant torque loads, such as extrusion machines and kilns
Three-phase squirrel cage induction motor250~900 frames37 kW ~ 20,000 kW
23
AC UPS and Battery Chargers
AC UPS and Battery Chargers
MTI - UPS Systems
The products deploy advanced power electronics technology and provide an output range from 5 KVA to 650 KVA (parallel redundancy). The UPS systems are designed and manufactured to meet specialized applications and to ensure reliable protection of critical loads in hospitals, utilities, telecom and other applications.
In addition to our range of Standard UPS systems, MTI Systems designs, develops and manufactures customized equipment (rectifiers, inverters, UPSs) in partnership with Astrid according to the customers specification. These products are commonly used in power plants, petrochemical plants, oil & Gas Industries & offshore platforms
Battery Chargers
MTI Systems industrial battery chargers offer a 30 year design and incorporate digital and power electronics technologies for added efficiency and reliability. The unique SCR rectifier with a doubly wound isolation transformer provides regulated DC output and current limiting capabilities. Multi output-filtering configurations are available to match the powering requirements
Battery & Battery Racks
1. NI-CD Batteries - Clear Case The impact-resistant clear case allows the user to easily monitor plate conditions and electrolyte levels. High performance pocket plate type alkaline storage battery 25 year field-proven design No emission of corrosive fumes Strong impact-resistant clear case protects against shocks and vibrations Wide operating temperature range from 25C to +50C
24
AC UPS and Battery Chargers
2. Translucent Case Batteries
High Performance Nickel Cadmium storage battery Three battery ranges designed for different discharge range: - KH/P Range (High) 1 sec90 min - KM/P Range (Medium) 5 min5 hours - KL/P Range (Long) 110 hours 20 years field-proven design Built in accordance with IEC 60 623, EN60 623, and DIN 40 771
3. Lead Acid Batteries
The OPzS Stationary Lead Acid Batteries are designed to provide battery power for deep cycling applications in telecommunication, utility, communication and transpor-tation industries. Due to the extremely low levels of self-discharge, they are also suitable for photovoltaic applications.
Capacity range: - 12 volt blocks: 50 to 150 Ah - 6 volt blocks: 200 to 300 Ah - 2 volt cells: 100 to 3000 Ah - 3 Year full warrant
4. VRLA Batteries
MTI Systems offers several types of Valve Regulated (Sealed) Type Lead Acid Batteries:> GT High Rate Series> GT Modular Low Rate Series> GT Modular Series> GT Front Access Series
5. Battery racks with different sizes
25
Earthing & Lightning Protection Systems
Tinned Copperd
Air Terminal Rod
Copper Tape - 25x3 mm, 50x6 mm, 25x6 mm, 50x3 mm
Copper Bonded Earth Rod & Acc.
26
ClipsClamps
ClampsMarconite Bentonite
Surge Protection DeviceWith Furse we offer a full range of Electrical Surge Protection solutions to protect your critical mission equipment fromtransient overvoltages. All Furse ESP products are designed to provide simple system integration whilst achievinghighest levels of effective protection against transients.
a) Main Power Suppliesb) Data & Signal Linesc) Phone lines & Computer Network
Accessories
Spike
d
Solid Copper Earth Rod & Accessories
Earth Pit
Earthing & Lightning Protection Systems
27
Electrical Plugs and Socket
28
Electrical Plugs and Socket
29
Explosion Proof Products
Explosion Proof Light Fittings
30
LED Floodlight
LED High Bay LED High Bay LuminaireLED High Bay Fixture
LED Area Light
LED Bulkhead Fixture LED Area Light
LED Street Light - CE Approved
Explosion Proof Products
Explosion Proof Light Fittings
31
LED Bulkhead FixtureStainless Steel LED Linear
Luminaire
LED Wallpack / Bulkhead Fixture
LED High Bay
Explosion Proof Products
32
Explosion Proof Products
Glass Reinforced Polyester
Copper Free AluminiumGlass Reinforced Polyester
Plugs & Sockets
33
Material Construction
Electrical Safety Products
Locking & Signalling LV Test & Measurement LV Earthing System Personal and Collective Protection Equipment
Live Working Tools LV MV Substation Equipment Medium Voltage Equipment
Earthing Connections Tension Equipment Ex Proof Safety Equipment Short Cireuit Earthing Leads
34
PROTECTION AGAINST ARC FLASH
The following are used to determine the proper equipment for protecting against anelectric arc:
The maximum fault current value. The phase/ground rated voltage at the site of the risk. The distance between the source of the arc and the reception surface. The AC cycle number and the mono or three-phase circuit type. The location where the arc is produced (confined space).
After recording these parameters, we can estimate the level of risk and determinethe proper protective clothing and PPE to use: 8 to 100 cal/cm2 or class 1 or 2.
For more information, please contact our technical department.
Electrical Safety Products
35
Arc Flash Protection
- The arc's main manifestation is its thermal effect. The heat energy released, whichis proportional to the voltage, intensity, and fault length, can be considerable(19,000C), melting the metal and charring the insulation.
- Blast effect, caused by the very rapid release of energy in a limited volume of air(similar to an explosion).
- Light effect with high ultraviolet and infrared radiation.- Ionisation effect that can trigger an arc on nearby active sections.
In addition to these effects, particles may be projected, and the metal may melt.
When electric arc danger exists, heat-resistant clothing must be worn.The arc's characteristics are given by: The resistance value of the free arc, expressed in cal/cm2 according to NFPA
70 E, ASTM standards, and IEC 61482-1-1.or The protection class (1 or 2) with a constrained arc according to IEC 61482-1-2.
The "Arc Flash" phenomenon.
UV and IR radiation.
Arcflash.
Fragments, droplets,and molten metal.
Plasmaball.
Fire-retardant clothing in case of exposure to an electric arc, confirmingto IEC 61482-2 and the regulationNFPA 70E.
An electric arc follows a short circuit. It produces nearly instant effects with seriousconsequences without proper protection.
Electrical Safety Products
36
Arc Flash Equipment
"Arc flash" protective kits (25, 40, 55, 65 or 100 cal/cm2)
KIT-ARC-40/55-B-(*)KIT-ARC-25-B-(*) KIT-ARC-65/100-B-(*)
Reference
KIT-ARC-25-B-(*) *1
KIT-ARC-40-B-(*) *2
KIT-ARC-55-B-(*) *3
KIT-ARC-65-B-(*) *4
KIT-ARC-100-B-(*) *5
Capacity cal/cm2
25 cal/cm2
40 cal/cm2
55 cal/cm2
65 cal/cm2
100 cal/cm2
6 000
6 900
8 000
8 000
8 000
KAKI
GREY
GREY
CAMEL
CAMEL
g
MO-182/1-B
MO-11000
M-87384
M-87295
(*) Reference to be completed by the size M, L or XL.Size S to 3 XL on request.
*1 For reference KIT-ARC-25-B-(*), kaki outfit.*2 For reference KIT-ARC-40-B-(*), grey outfit.*3 For reference KIT-ARC-55-B-(*), grey outfit.*4 For reference KIT-ARC-65-B-(*), brown/camel outfit.*5 For reference KIT-ARC-100-B-(*), brown/camel outfit.
Composition
M-881968 *1M-881961 *2M-881973 *3M-881976 *4M-881979 *5
1 arc flash protective hood with an integrated
face shield 25 *1, 40 *2, 55 *3, 65 *4 or
100 *5 cal/cm2,
ASTM F2178 and NFPA 70E Standards
1 ABS helmet electrically insulated
EN397, EN 50365, ANSI Z89.1 20kV.
1 safety glasses EN 166/EN 170
1 carrying bag for face shield and helmet
1 all kit carrying bag
1 arc flash protective bib overall 25 *1, 40 *2,
55 *3, 65 *4 or 100 *5 cal/cm2,
ASTM F1506
and NFPA 70E Standards
1 arc flash protective coat 25 *1, 40 *2, 55 *3,
65 *4 or 100 *5 cal/cm2,
ASTM F1506 and NFPA 70E Standards
Color
M-87295Carrying bag forthe kit.
M-881961Arc Flash protective hoodwith face shield, 40 cal/cm2.
MO-182/1-BElectrician helmet.
MO-11000Safetyglasses.
Arc Flash Dungarees,40 cal/cm2.
Arc Flash Jacket, 40 cal/cm2.
Electrical Safety Products
37
MV Substation Equipment
Close
Life saving kits
Wall mounted kit.
In case of an electrical accident, quick response is essential:seconds gained or lost can decide the life or death of a victim.Our life saving equipment is designed to make all necessarymaterials immediately available to rescue personnel.
Life saving kits for M.V. substations
Open
Insulated cable cutter
Maxi cable : 26 mm.Section 150 mm2.
CZ-60 0.630 2 200
Reference gm
Reference Characteristics
CZ-54-R
CZ-54-RM
CZ-55-R
CZ-55-RM
With instructionsin English
With instructions in English/ArabicWith instructions
in EnglishWith instructions in
English/Arabic
21 000
21 000
21 000
21 000
g
840 x 754 x 270
840 x 754 x 270
840 x 754 x 270
840 x 754 x 270
mm
24 kV
24 kV
36 kV
36 kV
Insulated handles25 kV.
Safety instructions on theplastic board.
Voltage detector with flexible antennacontact (with autotest).
Rescue telescopicstick.
Insulating platform24 or 36 kV.
Cable cutter with insulatedhandles. Forged steelblades. Maximum opening30 mm.
Wall mountedcabinet.
Insulatingboots.
High voltage Insulating gloves,insulating boots and talcumpowder can.
Insulating platform.
Telescopic insulatingstick.
Voltage detector with autotest.Rescue hook.
Insulated cutter cable.
Pair of insulatinggloves.
Talcum powder can.
Adhesive tape(black and yellow).
Safety instructions and safetyfirst aid posters.
Pair of insulatingboots.
Electrical Safety Products
38
MV Substation Equipment
Extra safety equipment and life saving kits
For sticks and voltage detectors. Plastic.
Wall mounted supports
CI-06-D
CI-08
CI-10-D
28-30
16-20
32-36
Reference mmTop
36 max.
36 max.
58 max.
mm
Bottom
Delivered with wood screws.
Top Bottom
Rescue hook
* Delivered with small mounted supports and 4 screws.
Reference Characteristics
CS-01-C Adaptor C 350
g
345 x 335
mm
On stick equippedwith a "C" end-fitting.
Compact carrying KIT
This compact kit is designed especially to be carried in a vehicle forsafety electrical intervention.Made in two part (of moulded material: PEHD), the case is also on itsred part, an insulating platform.
Reference Characteristics with instructions in English
CZ-53-R
CZ-53-MR
CZ-53-R/2
CZ-53-MR/2
With instructions in English
With instructions in English/Arabic
With instructions in English
With instructions in English/Arabic
21 000
21 000
21 000
21 000
g
710 x 570 x 240
710 x 570 x 240
710 x 570 x 240
710 x 570 x 240
mm
25 kV
25 kV
36 kV
36 kV
Electrical Safety Products
39
MV Substation Equipment
Insulating boots and mats
Insulating boots
Reference
(*) Add sizes: 39, 40/41, 42, 43, 44, 45, 46/47, 48, 49/50.Example: MV-135-40/41.
MV-135-(*)
MV-134-(*)
Voltage
20 000 V
1 000 V
Standards
ISO EN 20345ISO EN 20347
EN 50321 - Classe 0EN 13287
ISO EN 20345ISO EN 20347
Protection against step and touch hazardous potential gradients.
Made from high qualitydielectrical rubber, veryflexible and resistant.
Anti-perforation compositesole and shell. Anti-slipsole. EN 13287.
Safety tip in technicalpolymer.
External height370 mm.
MV-135MV-134
Insulating matsIndividual models
VoltageThickness
mm
MP-42/11
MP-42/16
MP-42/66
3
3
3
26.5 kV
26.5 kV
26.5 kV
1 000 x 1 000
600 x 1 000
600 x 600
4 500
2 900
1 800
gmm
3
3
3
For placing in front of panels
VoltageThickness
mm
MP-60/03-5
MP-60/03-10
MP-100/03-5
MP-100/03-10
MP-60/05-5
MP-60/05-10
MP-100/05-5
MP-100/05-10
3
3
3
3
4
4
4
4
26.5 kV
26.5 kV
26.5 kV
26.5 kV
36 kV
36 kV
36 kV
36 kV
600 x 5 000
600 x 10 000
1 000 x 5 000
1 000 x 10 000
600 x 5 000
600 x 10 000
1 000 x 5 000
1 000 x 10 000
14 000
28 000
25 000
53 500
28 000
44 000
45 000
89 000
gmm
3
3
3
3
5
5
5
5
High quality dielectricalrubber.
Regulatory markclearly indicatingthe mat features.
High qualitydielectricalrubber.
IEC 61111EN 61111
Non-skid surface.
Non-skid surface.
Reference Class
Reference Class
Insulating mats
Adapted to High Voltage.
Reference
MP-100/10-5
MP-100/10-10
1 000 x 5 000
1 000 x 10 000
87 000
154 000
gmm
10
10
Contact us for any particular application.
Thickness mm
Electrical Safety Products
40
MV Substation Equipment
Equipment for working on pole: insulating ladders
Insulating ladders
Reference Numbers of rungs
MP-602-D
MP-603-D
MP-604-D
MP-605-D
2.41 m
2.97 m
4.09 m
4.93 m
8
10
14
17
Simple ladders
A complete range with top quality features: Insulationbetween two steps: 30,000 V (test performed afterimmersion in water for 24 hours). High mechanicalresistance to bending and twisting.Good resistance/weight ratio. High fire resistance.High resistance against bad weather and corrosiveelements.
Lateral risers in polyester/glass fiber rectangular section70 x 25 mm. Aluminium alloyrungs with square.
29 x 29 mm sectionand anti-slip coating.
EN 131
EN 131
Reference Folded DeployedNumbersof rungs
MP-514/2
MP-515/2R
2.41 m
2.97 m
4.09 m
5.21 m
2 x 8
2 x 10
13 900
17 000
2 sections extension ladders, hand operated
Reference Numbers of rungs
MP-634/2-D 2.70 / 4.66 m 9 + 9
2 sections extention ladders
Ladders come with cradle, strap and front wheels.
g
Reference Folded DeployedNumbersof rungs
MP-506/2
MP-508/2
MP-509/2
MP-510/2
3.53 m
4.66 m
5.22 m
5.78 m
6.05 m
8.30 m
9.14 m
10.26 m
2 x 12
2 x 16
2 x 18
2 x 20
22 900
35 400
39 300
43 000
2 sections extension ladders, rope and pulley operated
g
Lateral risers in polyester/glass fiber rectangularsection 70 x 25 mm. Alu-minium alloy rungs withsquare
06-PMD-2/436-PM
2/605-PM2/415-PM
Wheels.
Wheels+ cradle.
29 x 29 mm sectionand anti-slip coating.
Instrumentation Division
Instrumentation ProductsLevel and Pressure Measurement EquipmentsFlow Measurement EquipmentsTemperature Measurement EquipmentsAnalyzer SystemsFlow Metering SystemsFire & Gas Detection EquipmentsCalibration EquipmentspH and Conductivity MeasurementControl and Automation Units
41
424344454748505253
Page No.
Level and Pressure Measurement Equipment
42
Flow Measurement Equipments
Multi-point Thermocouple Restriction Orfice Plate
TM Tecnomatic SPA has been a leading manufacturer of flow measurement devices for more than48 years. TM began its activities in 1962 in the town of Cremona, located in Italys notherenindustrial area. TM Tecnomatic manufacture Orifice Plates, Restriction orifice plates, Venturi Tubes,Flow Nozzles, Multistage Restriction Orifices, Pitot tubes, Annubar & Venturi Cone Meters
V-Cone Flow Meter Venturi Meter
Venturi Meter - Flanged
43
Temperature Measurement Equipments
Thermocouples / Thermowell & RTDs
Thermocouples are temperature sensing elements mostwidely used throughout industry for temperature measurements.Complete Thermocouple unit includes:
Sensing Element (thermocouple)Insulating terminal blockTerminal connection headExtension nipple or unionThermowell or protecting tube
44
Analyzer Systems
45
Analyzer Systems
46
Flow Metering Systems
47
Fire & Gas Detection Equipment
Simtronics is a world class provider of sophisticated gas andflame detections system. These products are used worldwideto provide early detection of hazardous events.All detectors ensure below parameters:
SafetyFast Reliable detectionSIL Compatible ReliabilityDurable mechanical designLong term stability Low life cycle costLow maintenanceLong operational lifetime
Multi Flame
Multi Tox Multi Xplo
GD 10P Flammable Deteator
Open Path H2S GD 1
TLU 600 Calibration Kit
Flammable Detector Long Version
Flammable Open Path
48
Detection CapabilitiesGas Detection - Infrared, catalytic, electrochemical, semiconductor (MOS), ultrasonicFlame Detection - Combined UV/IR, 3IR, Multispectrum IRSystems - Converntional 19" rack or addressable systems for safe area or hazardous area installations.Sampling systems and custom applications Fire Suppression - Water mist, deluge, sprinkler monitor,hydrant, dual agent gas systems, foam
Fire Alarm Panel
49
Fire & Gas Detection Equipment
Calibration Equipments
Decade BoxesResistance, Capacitance, Inductance.
Process Control EquipmentPressure, Temperature, & Loop calibrators.
Voltage & Current Test InstrumentsPortable Calibrators, Simulators & Sources.
Multifunction CalibratorsPrecision calibration for wide workload coverage.
Turnkey laboratory design and supply for lean and efficient test facilities.Built to optimise and automate the calibration process.
50
Calibration Equipments
Test Benches
CalBenchA Complete Calibration Laboratory in one Test Bench
CalBench is a custom-made system for specific user requirements,integrating modules for testing applications and much more.
Calibrates
51
Oscilloscopes
Decade Boxes
Power Supplies
Clamp Meters
Temperature Indicators
R-C-L Meters
Digital/Analog Multimeters
Pressure Gauges
Pressure Transducers
Process Instruments
Voltage & Current Sources
Temperature Sensors
pH and Conductivity Measurement
pH and redox electrodesInductive and conductive conductivity sensorsDissolved oxygen measurementChlorine, chlorine dioxide, ozone, hydrogenperoxide, and peracetic acid measuringProcess fittingsPneumatic retractable assemblyTransmitters/controllers
Pressure
Flow
Liquid Analysis
Pressure transducersPressure switchesPressure measuring cellsWireless pressure transmitterDiaphragm seals and accessoriesMeasuring devices for explosive areas
Flowmeters for steam, gas, and fluidsMID flow transmittersImpeller flow sensorsDifferential pressure transducers
52
Control and Automation Units
Control
Automation
HumidityHygro and hygrothermo transducers, capacitiveHygro and hygrothermo transducers, hygrometricCO2-measuring probe
Single and multichannel controllers
Process/program controllers
Panel-mounted thermostats
Surface-mounted thermostatsContact dial thermometers as display andcontrol device
Measuring, control and automation systemDisplay devicesAutomation softwarePower unitsSystem technologyTransmittersWireless transmittersSoftware and accessories
53
Oil & Gas Division - Mechanical
Equipments, Fabricated Units and Accessories
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
Valves for Oil & Gas and Water Industry
Pipeline Services
Oil & Gas - Mechanical Products
54
55
59
64
70
Page No.
Equipments, Fabricated Units And Accessories
Hot Tapping - Split Tee
Repair Clamp
Expansion Joint
Hot Tap Tees are used in hot tapping operations , consistingof a full-encirclement fitting and a weld-neck flange. Hot Tap Tees are designed and manufactured to ensure the integrityof the piping system
FeaturesFull branch or reduced branch fittings for use in hot tappingoperations - Supplied with ASME Class 150, 300, 600 flangeswith raised face or RTJ grooves , upto 36'' size - Standard fittings meet the requirements ofASME B31.3 and ASME B31.4/B31.8 with a 0.72 design factor -All pressure containing weldsare 100% radiographed
The Pipeline Repair Clamp is an economical bolt together fittingconsisting of two half shells, designed to effect a temporary orpermanent repair to damaged or leaking pipelines. These clampscan be fitted to both surface and sub-sea pipeline. -Upto 48''size -ASTM A105, A216 WCB with ASTM A193 B7/2H Bolts
Rubber Expansion Joints are used for compensationof pipeline thermal expansion, for disalignment, forvibration isolation and reduction, for noise reductionfrom pipeline, pump and other equipment work.
Metallic Expansion Joints are useful to absorb differentialthermal expansion and vibration whilstcontaining thesystem pressure.
Fabric Expansion Joints are used in a variety of industrialuses including cement, paper & pulp, steel, automotive,air pollution and power/utility applications.
55
Equipments, Fabricated Units And Accessories
Monolithic Insulation Joints
Pipeline Pigs
Pig Signallers
Pipeline pigs are used for cleaning and inspection of pipesAvailable in variants like Foam Polly-Pigs, Steel Mandrel Pigs,Polyurethane Spheres, Solid-Cast Turbo Pigs and Spare rethane Cups & Discs
Non-intrusive pig signaler with either permanent magnetsor active transmitters mounted onto the pig to detect passage from 0.022 to 45.73 mph (0.01m/s to 20 m/s).
Intrusive pig singallers with mechanically operated signal flagswhich can be reset and are suitable for mounting on bothvertical and horizontal pipelines.
High and Low Pressure Pipeline PlugsPipeline plugs are also used for isolation and for very basicpig launching.
High pressure pipeline plugs are available from 4'' to 48'' towithstand upto 10 bars
Low pressure pipeline plugs are available from 1.5 '' to 48'' towithstand upto 10 psig
Monolithic insulating joints are used to electrically isolatesections of a pipeline to ensure full efficiency to cathodicprotection systems against corrosion. These insulation areused in gas networks of low, medium, increased - mediumor high pressure fed with gas and liquid fuels or water.-Usefulin before and after gas reducing and gauging stations, ingas and oil mining systems, on gas and liquid fuel reservoirsand systems.- Useful in underground and overhead constructions-Working pressure - Upto 420 bars- Leaktightness - 6 bar / 10 min
56
Equipments, Fabricated Units And Accessories
Strainers
Pressure Vessels
Heat Exchangers
Fabricated and cast strainers available in different materialgrades and different variants like Y-Type - Flanged Strainers Conical Strainers Basket Strainers Tee Strainer and Duplex StrainersMaterial Grade - CS, SS, DSSSizes - 1/2'' to 48''Upto 2500 Class- Ends - Screwed, Flanged
A closed container designed to hold gases or liquids at apressure substantially different from the ambient pressure.
Used as industrial compressed air receivers and domestichot water storage tanks.
Heat exchanger is used for efficient heat transfer from onemedium to another and widely used in space heating,refrigeration, air conditioning, power plants, chemical plants,petrochemical plants, petroleum refineries, natural gasprocessing, and sewage treatment.
Reactors & Separators
Reactors and separators for petrochemical plants
Chemical Injection FittingsInjection systems are used to inject a wide range ofchemicals into processes like biocides, demulsifiers,corrosion inhibitors etc.
- Allows for even distribution of the injected chemical.
- Sampling systems are used to take samples of the process fluid or medium for analysis.
57
Equipments, Fabricated Units And Accessories
Hub Connectors
Elaflex
Fire Protection Systems
- Replaces conventional ANSI or API flanges, ensures seal, and require less bolt loads.
- Useful even in high pressure systems of 60,000psi and above
-Withstands considerable bending moments/forces and axial loading under pressure without leaking
- Minimise maintenance downtime
- Uses reusable sealrings giving greater flexibility for hydro testing and commissioning
- Fittings, couplings, clamps, adaptors, Hoses, Hose Configurators
- Expanison Joints and Seals
- Nozzles
UL and FM approved systems to for active fire protection
- Sprinklers - Max working pressure of 16 bars
- DI and CI strainers upto 12'' and 175 PSI working pressure
- Flow meters for sizes upto 12 ''
- Grooved and threaded Pipes fittings for pressure rating upto 44 bars
- Pipe hangers and accessories
- Fire hydrants and hole reels
58
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
DESCRIPTION: PIPES
MATERIAL GRADE:Carbon Steel: A106 Gr B / API 5LB / A53 Grade B X42 - X52 - X60Carbon Steel (LT): A333 Gr 6 / API 5L PSL1 X52Stainless Steel: A312 Gr 304 / L , 316/ LDuplex Stainless Steel: A790 /A915 UNS S31803Super Duplex, Alloy Stainless Steel
STANDARDS: ASTM / ASME / API
SIZE RANGE: 1/2" - 72"Various Schedules Seamless / Welded / Tubing (Galvanised / Non Galvanised)
DESCRIPTION: BUTTWELD FITTINGS
MATERIAL GRADE:Carbon Steel: A234 Gr WPB, WPHY52, WPHY60, WPHY70Carbon Steel (LT): A420 Gr WPL6Stainless Steel: A403 Gr 304 / L , 316/ LDuplex Stainless Steel: A815 UNS S31803Super Duplex, Alloy Stainless Steel
STANDARDS: ASME / ANSI / MSS SP 75
PRODUCT: 45 / 90 Deg Elbow (Short / Long Radius),Reducing / Equal Tee, Eccentric / Concentric Reducer, End CapBARRED TEES, BENDS, LATERAL TEE, SIAMESE TEE
SIZE RANGE: 1/2" - 72"Various Schedules Seamless / Welded
DESCRIPTION: FLANGES
MATERIAL GRADE:Carbon Steel: A105Carbon Steel (LT): A350 Gr LF2Stainless Steel: A182 Gr F316Duplex Stainless Steel: A182 Gr F51 / F53Super Duplex, Alloy Stainless Steel
STANDARDS: ASTM / ASME / API
PRODUCT: WNRF / WNFF / Blind, Slip On SocketWeld Threaded Flanges, Lap Joint FlangeOrifice Flanges
SIZE RANGE: 1/2" - 72"Various Schedules / 150 - 2500#, 5000/10000/15000 PSI
59
DESCRIPTION: SPECTACLE BLINDS /SPACERS / SPADES
MATERIAL GRADE:Carbon Steel: A 516 Gr 60 /65 / 70Stainless Steel: A 240 TP 316Duplex Stainless Steel: A182 Gr F51 / F53 / A240 UNS S31803
STANDARDS: ASTM
SIZE RANGE: 2" - 24"Various Thickness 150 - 2500#
DESCRIPTION: GASKETS
MATERIAL GRADE:Carbon Steel: A 285 Grade CStainless Steel: A240 TP Gr F316Duplex Stainless Steel: A240 UNS S31803(Compressed Non Asbestos Fibre / EPDM / PTFE/ Neoprene)
STANDARDS: ASTM
PRODUCT: Spiral Wound Gaskets, InsulationGasket Sets, Tanged Insert Gasket, Ring Joint Gaskets,Metal Jacketed Gaskets
SIZE RANGE: 1/2" - 48"150 - 2500#
DESCRIPTION: FORGED FITTINGS
MATERIAL GRADE:Carbon Steel : A105Carbon Steel (LT) : A350 Gr LF2Stainless Steel : A182 Gr F316
STANDARDS: ASTM
PRODUCT: Threaded Fittings (Galvanised/Non Galvanised) 45 / 90 Deg Elbow ,Reducing / Equal Tee, Eccentric/Concentric Reducer, End Cap, Coupling, Bushing,Plug, Union
SIZE RANGE: 1/2" - 4"3000 - 9000#
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
60
DESCRIPTION: BRANCH FITTINGS
MATERIAL GRADE:Carbon Steel: A105Carbon Steel (LT): A350 Gr LF2Stainless Steel: A182 Gr F316Duplex Stainless Steel: A182 Gr F51 / F53Super Duplex, Alloy Stainless Stee
STANDARDS: ASTM
PRODUCTS: Sockolet, Threadolet, Weldolet,Nippoflange, NippoletLATROLE
SIZE RANGE: 1/2" - 24"Various Thickness and Pressure Class
DESCRIPTION: STUD BOLTS & NUTS
MATERIAL GRADE:A193 Gr B7M / A194 Gr 2HM, A193 Gr B7 / A194 Gr 2H,A320 L7 / A194 Gr 4, A320 Gr L7M / A194 Gr 7M, A193 Gr B8M / 8M,A182 F51, F55, ISO 898 / 1 class 8.8, B16 UNS C36000-TEMP.BS 2874 GRADE CZ 121
STANDARDS: ASTM
PRODUCT: J Bolt, U Bolt, Foundation Bolt, JackScrew, Hexagon Bolting, Structural Bolts
SIZE RANGE: Various Sizes and Lengths
DESCRIPTION: MILDSTEEL FITTINGS
MATERIAL GRADE:Carbon Steel: A234 Gr WPB,Carbon Steel (LT): A420 Gr WPL6Stainless Steel: A403 Gr 304 / L , 316/ LDuplex Stainless Steel: A815 UNS S31803
STANDARDS: ASME / ANSI
PRODUCT: 45 / 90 Deg Elbow (Short / Long Radius)Reducing / Equal Tee, Eccentric / Concentric Reducer,End Cap / BENDS
SIZE RANGE: 1/2" - 72"Various SchedulesSeamless / Welded
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
61
MATERIAL GRADE:Ductile Iron
STANDARDS: ISO / EN Standard
PRODUCTS: Full range of Fittings / Pipes
SIZE RANGE: 2" - 48"
DESCRIPTION: PLASTIC FITTNGS, VALVES, STRAINERS,EXPANSION JOINT, PIPE AND CEMENT
MATERIAL GRADE:CPVC (SCH80), SDR-11 (CPVC-SCH40), UPVC (SCH 40 & 80)
PRODUCT: PIPES, FITTINGS (TEES, ELBOWS,COUPLINGS, REDUCERS, CROSSES, WYES, ADAPTERS,CAPS, PLUGS, CLEANOUTS), SADDLES, FLANGES, VALVES(BALL, CHECK, GATE, BUTTERFLY, NEEDLE, DIAPHRAGM, Y PATTERN),STRAINERS & FILTERS (TEE STYLE, Y TYPE, TRUE UNIONY TYPE, BASKET, SUCTION), EXPANSION JOINT.
SIZE RANGE: STANDARD SIZES
MATERIAL GRADE:Groved Fittings
STANDARDS: A536
PRODUCT: Full Range of Fittings(Galvanised/Non Galvanised)
SIZE RANGE: 1" - 6"Various Thickness and Pressure class
MATERIAL GRADE:Malleable Iron Fittings
PRODUCT: Full Range of FittingsNPT, Screwed , BSPT (Galvanised/Non Galvanised)
SIZE RANGE: 1/4" - 6" 150#
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
62
Pipes I Fittings I Flanges I Gaskets I Stud Bolts
63
Valves for Oil & Gas and Water Industry
VALVE TYPE: GATE VALVESIZE RANGE: 1/2" ~ 60"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE:Carbon Steel: WCB, WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low Alloy Steel: WC6, WC9, C5,C12,F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M,CF3Duplex Stainless steel, Super Duplex Stainess Steel,Nickel Alloys, Copper alloys.
TECHNICAL SPECIFICATION: Wedge type design, Parallel slide design,Extended stem design, Pressure seal bonnet design, Extended bonnetfor cryogenic application, Gate valve with Bypass valve for highpressure service, Motor operated valve, Flanged/buttweld endthreaded/socket weld end Forged steel/Cast steel gate valve,API600/AP602/API 6A Valves.
VALVE TYPE: GLOBE VALVESIZE RANGE: 1/2" ~ 20"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE:Carbon Steel: WCB,WCC, A105Low Temperature Carbon Steel: LCB,LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Plug type design, Ball type design, Pressureseal bonnet design, Extended bonnet for cryogenic application, Motoroperated valve, Forged steel/cast steel globe valve, Flanged/buttweldend/threaded/socket weld end.
VALVE TYPE: SWING CHECK VALVESIZE RANGE: 1/2" ~ 36"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M,CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Swing check valve, Pressure seal bonnetdesign, Forged steel/Cast steel check valve, Flanged/buttweld end/threaded/socket weld end.
64
VALVE TYPE: NOZZLE CHECK VALVESIZE RANGE: 1" ~ 144"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE: Carbon Steel: WCB,WCC,A105Low Temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Wafer type, Lug type, Double flange andButtweld end type,threaded end
VALVE TYPE: BALL VALVESIZE RANGE: 1/2" ~ 56"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless Steel, Super Duplex Stainess Steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Floating ball valve design, Tunnion mountedball valve design, Extended spindle for burried application, Metal seatedball valve, soft seated ball valve, Fully weld contruction, single piece/twopiece/three piece construction.
Valves for Oil & Gas and Water Industry
VALVE TYPE: DUAL PLATE CHECK VALVESIZE RANGE: 2" ~ 144"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE:Carbon Steel: WCB,WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super Duplex Stainess Steel,Nickel Alloys, Copper Alloys.
TECHNICAL SPECIFICATION: Wafer type, Lug type, Double flange andButtweld end type
65
VALVE TYPE: CONTROL VALVESIZE RANGE: 1/2" ~ 12"CLASS RATING: 150~1500
MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless steel: CA15, CA6NM, CF8M,CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Control valves for severe duty application,Linear motion valves-Globe, Diaphram or pinch type, Rotary motionValve-Ball, Butterfly, Plug Type
VALVE TYPE: EMERGENCY SHUTDOWN VALVES(ESD VALVES)SIZE RANGE: 1/2" ~ 56"CLASS RATING: 150CL ~2500CL
MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low temperature carbon steel: LCB,LCC,LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15,CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: ESD valve with Pneumatic actuatorESD valve with Hydralic actuator ESD valve with Electro-hydraulic actuator
Valves for Oil & Gas and Water Industry
VALVE TYPE: BUTTERFLY VALVESIZE RANGE: 1/2" ~ 48"CLASS RATING: 150~1500
MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Soft seated and Metal seated contruction,Concentric, double offset, triple offset design Extended stem design,Motor operated valve
VALVE TYPE: PLUG VALVESIZE RANGE: 1/2" ~ 12"CLASS RATING: 150~1500
MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super Duplex Stainess Steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Motor operated plug valve
66
VALVE TYPE: DIAPHRAM VALVESIZE RANGE: 1/2" ~ 14"CLASS RATING: 150~1500
MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low Alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: WEIR TYPE DIAPHRAGM VALVE, STRAIGHTTHROUGH DIAPHRAGM VALVE Lining:Neoprene/Natural/Rubber/Ebonite/Glass/Teflon/EPDM/FRP, Food grade etc. Diaphragm: Natural Neoprene,Hyplon, Butyl, EPDM, PTFE with neo, EPDM PAD, Viton, Nitrile Buna-N,Food grade, etc.
VALVE TYPE: INSTRUMENTATION VALVESIZE RANGE: 1/2" ~ 2"CLASS RATING: 150~2500
MATERIAL GRADE: Carbon Steel: A105Low temperature Carbon Steel: LF2Low alloy steel: F11, F22 Etc.Stainless steel: F316, F316L, F303, F303LDuplex Stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Single block block and bleed typeDouble block and bleed type, Monoglange type, Modular type design,Sampling valve, Chemical injection valve, Needle valve, Manifold valve
Valves for Oil & Gas and Water Industry
VALVE TYPE: SAFETY RELIEF VALVESIZE RANGE: 1/2" ~ 8"CLASS RATING: 150~2500
MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: Pressure Safety Valves, Relief ValvesPressure Reducing Valves, Self acting pressure control valve.
VALVE TYPE: FOOT VALVESIZE RANGE: 1/2" ~ 8"CLASS RATING: 150~600
MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.
TECHNICAL SPECIFICATION: flanged ends/Scrwed ends
67
VALVE TYPE: BUTTERFLY VALVESIZE RANGE: 50mm~2000mmCLASS RATING: PN6~PN25 150CL~1500CL
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless Steel,Aluminium Bronze
TECHNICAL SPECIFICATION: Soft and metal seated butterfly valves forwater and sea water application. Double flange, Wafer type and Lugtype butterfly valve Valves for sewage water/drinking water application.FM/UL certified valves-fire fighting service
VALVE TYPE: GATE VALVESIZE RANGE: 50mm~2000mmCLASS RATING: PN6~PN25 150CL~900CL
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless Steel,Aluminium Bronze
TECHNICAL SPECIFICATION: Soft seated and metal seated gate valveKnife Gate valve, Soft Sealing Type , Resilient Seat, for water service.Extension Spindle design, Actuation By Gearbox with Hand wheel,Pneumatic & Electrical, Valves for sewage water/drinking waterapplication, FM/UL certified valves-fire fighting service
VALVE TYPE: Non-Return ValveSIZE RANGE: 50mm~900mmCLASS RATING: PN6~PN25 150CL~900CL
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steelAluminium Bronze
TECHNICAL SPECIFICATION: Venturi, Swing type, ball check, Tilting disccheckvalve, Soft Sealing Type , Resilient Seat for water service.Extension Spindle design, Valves for sewage water/drinking waterapplication FM/UL certified valves-fire fighting service
Valves for Oil & Gas and Water Industry
VALVE TYPE: Choke ValveSIZE RANGE: 1/2" ~ 6"CLASS RATING: 150 4500 lbs ANSI - 2000 15000 lbs API
MATERIAL GRADE: Carbon Steel: A105Low temperature carbon steel: LF2 Low alloy steel:F11,F22 Etc.Stainless steel:F316, F316L, F303, F303LDuplex stainless steel, Super Duplex Stainess Steel, Nickel alloys,Copper alloys.
TECHNICAL SPECIFICATION: Cv range: 0.05 - 650
68
VALVE TYPE: AIR VALVESSIZE RANGE: 50mm~900mmCLASS RATING: PN6~PN25
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steel
TECHNICAL SPECIFICATION: Double Orifice Triple Function Air ValvesValves for sewage water/drinking water applicationFM/UL certified valves-fire fighting service
VALVE TYPE: Pressure Reducing Control ValveSIZE RANGE: 50mm~800mmCLASS RATING: PN6~PN25
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steel
TECHNICAL SPECIFICATION: Diapharm actuated and piton actuatedcontrol valve Valves for sewage water/drinking water applicationFM/UL certified valves for fire fighting service
VALVE TYPE: FLAP VALVESIZE RANGE: 50mm~800mmCLASS RATING: PN6~PN25
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steel
TECHNICAL SPECIFICATION: Valves for sewage water/drinking waterapplication
Valves for Oil & Gas and Water Industry
VALVE TYPE: BALL VALVESIZE RANGE: 1/4 to 4 in.CLASS RATING: PN6~PN25
MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steelAluminium Bronze
TECHNICAL SPECIFICATION: Soft Sealing Type , Resilient Seat for waterservice. FM/UL certified valves-fire fighting service
69
Pipeline Services
70
Pipeline Services
TESON
71
Lighting Division
Commercial LuminaireDecorative & ArchitecturalHealth CareIndustrial
73747575
76777878
Indoor LightingZone 1 & 21 and 2 & 22
Explosion Proof
Exit LightsGreen Building
8080
Emergency
SolarLED
8181
82
Green Building
Chandeliers
Street LightingArea Lighting & Land Scape LightingPoles & High MastSports Lighting
Outdoor Lighting
72
79
Page No. Page No.
Indoor Lighting
Commercial Luminaire
Lighting of modern workspace has evolved from simple functional lighting to a more innovative andcreative approach.
Lighting can create a warm and vibrant atmosphere. Right lighting emphasizes on enhancingproductivity through quality of light rather than quantity of light alone.
73
Indoor Lighting
Decorative & Architectural
Lighting plays a substantial role to represent the aesthetics, contours and finish of each project.
Without being visible, the effects add value to the structures and provide visual appeal
74
Indoor Lighting
Health Care
Industrial
Right light increases patients sense of well being, create a warmenvironment, and supports the accomplishment of visual task
in different therapy.
75
Outdoor Lighting
Street Lighting
Street lighting is used to accentuate design and security. Streetlighting also blends with the surronding byenhancing the architectural details and hence termed as "street Furniture"
76
Outdoor Lighting
Area Lighting & Landscape Lighting
Landscape lighting is concerned with the illumination of features to exploit texture, form, and color inorder to suggest a sense of depth. Combination of light and shadow can create dramatic effects in
complete contrast to the day light scene.
77
Outdoor Lighting
Poles & High Mast
Sports Lighting
Conceptual lighting to illuminate large areas, facilitating safety & security. Appropiate material ofconstruction, design and ease of operation contribute to maintenance free installataions.
78
Sports lighting being uniqueeach time, we offercustomized solutions.
Explosion Proof
Hazardous Area Lighting
Explosion proof luminiares must meet stringent standards to ensure that the hazardous surroundingatmosphere is never exposed to ignite an explosive gas.
79
Emergency
Emergency lighting systems are used to provide safe, reliable illumination to designateareas during failure of power.
Energy efficient, day light harvesting features to utilize the natural resources and optimize powerconsumption, with reduction in Carbon emission to provide a GREEN environment
Green Building
Exit Lights
80
Green Building
LED
81
Chandeliers
Decorative, ceiling lights creating sense of pride for centuries and generatinga serene atmosphere in the spiritual buildings.
82
8497102107108111115
Mechanical Division
83
Power ToolsConstruction ToolsMetal Cutting ToolsPumpsFastenersManhole CoversMechanical Splicing Systems
Blockwork & Plaster Accessories
Tools Division
Fischer 117
125
Fixing Division
Page No.
Power Tools Tools Division
Compact Grinders
Models:W 780-115W 8-100W 8-115W 8-115 QuickW 8-125 QuickWP 8-125 Quick ProtectW 11-125 QuickWP 11-125 Quick ProtectWA 11-125 QuickWB 11-125 QuickWBA 11-125 QuickWE 14-125 Inox plusWE 14-125 QuickWE 14-150 plusWE 1450-125 RTWEA 14-125 PlusWEA 14-150 PlusWEPBA 14-125 Quick Protect
Features:Auto Cutoff Carbon BrushRobust long lasting Metabo Marathon MotorHigh overload capacityDie cast aluminium gear housingMetabo S-automatic torque limiting clutchAuto balancer for double the service life ofdiscs and minimal vibrations(2,7m/s2)Dead-man function switchMetabo "Quick" tool quick changeAdditional Metabo VibraTech (MVT) handle forvibration dampingTool-free adjustable guard; twist-proofedHigh torqueTacho Constamatic (TC) full-wave electronicsElectronic soft startOverload protectionRestart protectionMetabo disc brake: Quick stop of the grindingwheel within 2 seconds after switch-offAvailable in 110 V
84
Power Tools
Medium & Large Grinders
Models:W 17-180W 21-180W 21-230W 22-230W 23-180W 24-180WX 17-180WX 22-180WX 22-230WX 24-180WX 24-230WX 24-230 QuickWX 26-230 Quick WXLA 24-180 QuickWXLA 24-230 QuickWXLA 26-230 Quick
Features:Auto-stop carbon brushesMain handle rotatable without toolsAdditional handle adjustable according toapplication: left, right or upwardsRobust Metabo Marathon motorStarting current limitation with soft startAuto balancer for double the service life of discsand minimal vibrations(2,7m/s2)Metabo safety switch: safety lock againstunintentional startElectronic safety shutdown of the motor if thedisc jamsRestart protection: prevents unintentional start upof the machineDie cast aluminium gear housingMetabo "Quick": Quick-change toolsMetabo VibraTech (MVT): Reduction in the healthrisks caused by hand-arm vibrationReduced service expenditure thanks to Metabolonglife carbon brushesAvailable in 110 V
85
Tools Division
Power Tools
Rotary, Combination,ChippingHammers & Breakers
Models:BHE 2243BHE 22BHE 2444KHE 2443KHE 2444KHE 2650KHE 3250KHE 3251KHE 56KHE 76KHE 96
Features:Easy to hold in all working situations: threerubber-coated handles always ensure an optimalholding positionMetabo VibraTech (MVT): reduced vibration levelsVario Tacho Constamatic (VTC) full-wave electronicsThumbwheel for preselecting of speedElectronic soft start for precise spot-drillingDie cast aluminium gear housingTorque limiting clutchAuto-stop carbon brushesBrush wear indicatorAvailable in 110 V
86
Tools Division
Power Tools
Chipping Hammers & Breakers
Models:MHE 56MHE 96
Features:Metabo VibraTech (MVT): reduced vibration levelsLong, slim design for an upright working position when performing tasks at ground level.Vario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startDie cast aluminium gear housingChisel can be fixed in 16 positionsAuto-stop carbon brushesBrush wear indicator
87
Tools Division
Power Tools
Cutoff Saw Machine
Models:CS 23-3552300 Watts
Features:Powerful(2300 W) and fast cutting for profiles, pipes and rods made of steel, cast iron,aluminium and other non-ferrous metals.Spindle lock for easy disc changeQuick clamping device with variable mitre conversion from -15 up to 45Motor and gear with ball bearing and designed for high loadsSwiveling blade guardAdjustable spark guide plateAdjustable depth guideAvailable in 110 V
88
Tools Division
Power Tools
Jig Saw and Sabre Saw
Models:STE 70STE 80 QuickSTE 90 SCSSTE 100 SCSSTE 135 PlusSTE 140 PlusSTEB 70 QuickSTEB 80 Quick
Models:PSE 1200
Features:Extremely powerful jig saw with VTC electronics for fast cutsinto softwood of up to 140 mmPrecise and material-matched sawingMetabo "Quick" no-tool saw blade change function withautomatic rejectionNo-tool adjustable footplate with rest pointsMotion-activated LED light for bright illumination of thecutting areaVario-Tacho-Constamatic (VTC) full wave electronicsRestart protection: Prevents unintentionally starting themachine.Robust gear and motor design and durable die castaluminium gear housingAvailable in 110 V
89
Tools Division
Power Tools
Magnetic Drilling Machine
Models:MAG 32MAG 50MAG 28 LTX 32
Features:Powerful magnetic core drill with large lift for core andfull drillingRobust Metabo Marathon Motor for extra long service lifeVario Tacho Constamatic (VTC) full-wave electronicsWith electronics and right/left rotation for cutting threads,grinding and loweringMagnet base with high holding power for safe operationAvailable in 110 V
90
Tools Division
Power Tools
Circular Saw
Models:KS 54KS 66KS 85KS 55 FSKS 66 PlusKSE 55 Vario PlusKSE 68 Plus
Features:Metabo S-automatic torque limiting clutchQuick stop of saw blade on shutting off the machineSpindle lockSturdy aluminum die cast saw housingFully closed guide plate for secure supportVibration-damping, non-slip rubber coated handleVario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startOverload protectionExternal dust extraction is possibleAuto-stop carbon brushesAvailable in 110 V
91
Tools Division
Power Tools
Sanders & Table Saws
Belt Sanders
Disc Sanders
Models:BAE 75
Features:Powerful and loadable motor with high reserve capacityFast and easy sanding belt changeVario Tacho Constamatic (VTC) full-wave electronicsThumbwheel for preselection of belt speedSide handle for ideal machine guidanceDust extraction unit
Features:Multi-purpose machine for sanding & polishing even andcambered surfaces, wood, plastics, non-ferrous metals,sheet steel"Duo" Oscillating circuit setting for fine-finishing or heavystock removalDust-proof ball bearingSturdy aluminum die cast bearing housing Vibration damping, non-slip rubber support on the machinehousing and the handle
Models:SXE 400SXE 325 IntecSXE 425 Turbo tecSXE 450 Turbo tecFSR 2000 Intec
Table Saw
Features:Precise table saw in professional configuration - quickequipping for every applicationPowerful universal motorSturdy parallel guide/ripping fence with quick fasteningFreely height-adjustable saw blade
Models:TKHS 315C-2.0 WNBTKHS 315C-2.8 DNBTKHS 315 M-3.1 WNBTKHS 315 M-4.2 DNB
92
Tools Division
Power Tools
Special Tools For StainlessSteel (Inox)Sanders and Grinders:
Features:Robust long lasting Metabo Marathon Motor Vario TachoConstamatic (VTC) full-wave electronicsThumbwheel for preselecting of speedElectronic soft startRestart protectionFor burnishing, finishing and reconditioning stainless steeland other materials to a high glossLarge 270 wrap angle for efficient work.
Features:For burnishing, finishing and reconditioning stainless steeland other materials to a high glossSpindle lock for simple change of toolsVario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startRobust long lasting Metabo Marathon MotorRestart protectionDie cast aluminium gear housing.
Models:Burnishing MachineSE 12-115 Set
Features:The cordless expert for stainless steel with reducedrevolutions for low temperature surface processing.High torqueSlim motor housing for ideal handlingTool change without keyTool-free adjustable guard; twist-proofedRobust and wear-resistant 4-pole motorElectronic soft start
Models:Cordless Inox grinderW 18 LTX 125 INOX
Models:Tube belt sandersRBE 12-180RBE 9-60
93
Tools Division
Power Tools
Cordless Drills /Screwdrivers
Features:Metabo "Quick": Quick change of tool holder and toolbeing usedSelectable "impuls" modeVariospeed (V) electronicsQuick StopIntegrated working lightDie cast aluminium gear housingPatented AIR COOLED technology for speedy charging andlong service lifeRobust battery packs with capacity displayThe high torque attachment PowerX3 triples the power ofthe tool for extreme applications(maximum soft torque 120 Nm)
Models:BS 12 NicdBS 14.4 LiBS 14.4 LTBS 14.4 LT QuickBS 18 LIBS 18 LTBS 18 LT QuickBS 18 LTX ImpulsBS 18 LTX QuickBS 18 LTX-x3 QuickPowerMax BSPowerMax BS BasicPowerMax BS pro
94
Tools Division
Power Tools
Other Cordless ToolsCordless Angle Grinder
Cordless Die Grinder
Cordless Hedge Trimmers
Cordless Cartridge Guns
Cordless Combo Sets
Cordless Fillet weld Grinder
Cordless Worksite Radio
95
Tools Division
Power Tools
Utility ToolsPumps Models:
P 3000 GP 3300 SP 4000 SP 5500 MP 600/1600 W
Features:For pumping, pumping out, pumping empty,circulation of clear waterGround water pumpingPump housing made of special steelWeightless and Sleek Design
CompressorsModels:Basic 260Basic 265Basic Air 250 Basic Air 350Classic Air 255Mega 350 D to 715 DPower Air 350Power Air V 400
Features:Compact and mobile piston compressor forprofessional use indoors and at construction sitesParticularly low on noise and vibrationsOil-lubricated piston condenserGood cold start feature thanks to pushbutton with starting valve
Vacuum Cleaners Models:AS 1200AS 20 LASA 1202ASA 32 LASR 2025ASR 2050ASR 35 L/M Autoclean
Features:Suitable for extracting dust and solid particlesAlso suitable for absorbing non-flammable liquidsIntegrated socket with automatic start mechanismEasy and quick filter changeElectro-magnetic vibration deviceLong filter service life and large cleaning intervalsStableExtra large wheels
96
Tools Division
Tools Division
Concrete Cutting Tools
97
Construction Tools
TILES/NATURAL
STONE
Concrete Cutting Tools
98
Tools DivisionConstruction Tools
Concrete Cutting Tools
99
Tools DivisionConstruction Tools
Concrete Cutting Tools
100
Tools DivisionConstruction Tools
Concrete Cutting Tools
101
Tools DivisionConstruction Tools
Metal Cutting Tools
Applications
Cutting-off of: sheet metal, rods, profiles and pipes Particularly suitable for small cross-sections and thin sheets
Consumer Groups
Steel construction, terotechnology and shipbuilding; building construction; vehicle repair workshops; heating, plumbing and air-conditioning technology
MATERIALS, WORKPIECES
Quality
Short cutting-off times
Suitable for various materials Cutting-off to precise dimensions Unstrenuous working
Application Tips
Easy pendulum movement (oscillating) Composite materials (steel cables, cables, etc.) and nonferrous metals can also be cut without any problems
Nonferrous metals
Stone, concrete
Stainless steel Steel/cast steel
Steel/stainless steel
CUT-OFF WHEELS
102
Tools DivisionMetal Cutting Tools
Metal Cutting Tools
Type No. Shape Dimensions Specification PU Comments
223032 41 300x2,5x25,4 A46-BF 10 223033 41 350x2,8x25,4 A46-BF 10 485530 41 400x3x25,4 A46-BF 10
BASIC 41
Type No. Shape Dimensions Specification PU Comments
497931 42 100x3x16 A30-BF * 25 Universal cut-off wheels for the widest range of material cross-sections (only steel).
497933 42 115x3x22,23 A30-BF * 25 497934 42 125x3x22,23 A30-BF * 25 309581 42 178x3x22,23 A30-BF * 25 497935 42 230x3x22,23 A30-BF * 25
497936 42 100x3x16 A30-BFINOX 25 Universal cut-off wheels for stain-less and acid resistant steel.
497937 42 115x3x22,23 A30-BFINOX 25 497939 42 125x3x22,23 A30-BFINOX 25 497943 42 178x3x22,23 A30-BFINOX 25 497945 42 230x3x22,23 A30-BFINOX 25 494440 42 100x3x16 C30-BF 25 For cutting stone and concrete. 494441 42 115x3x22,23 C30-BF 25 494443 42 125x3x22,23 C30-BF 25 223029 42 178x3x22,23 C30-BF 25 223031 42 230x3x22,23 C30-BF 25
223020 42 100x2,5x16 A30-BF * 25 Cut-off wheels for cutting all types of steel materials (incl. stainless steels and cast mate-rials).
223021 42 115x2,5x22,23 A30-BF * 25
223022 42 125x2,5x22,23 A30-BF * 25
223023 42 178x3x22,23 A30-BF * 25
222044 42 230x3x22,23 A30-BF * 25
*Fe, S, Cl content 0.1%
BASIC 42
BASIC CUT-OFF WHEELS
103
Tools DivisionMetal Cutting Tools
Metal Cutting Tools
Type No. Shape Dimensions Specification PU Comments
540634 27 100x6x16 A30-BF 10 FAST CUT: Universal rough grinding wheels for use on steel; surface or edge grinding
540637 27 115x6x22,23 A30-BF 10 540639 27 125x6x22,23 A30-BF 10 540641 27 178x6x22,23 A30-BF 10
540642 27 230x6x22,23 A30-BF 10
540643 27 100x6x16 A30-BFINOX 10 FAST CUT: Universal rough grin-ding wheels for use on INOX; surface or edge grinding
540644 27 115x6x22,23 A30-BFINOX 10 540647 27 125x6x22,23 A30-BFINOX 10 540652 27 178x6x22,23 A30-BFINOX 10
540653 27 230x6x22,23 A30-BFINOX 10
222872 27 100x6x16 C30-BF 10 TOUCH: For grinding stone and concrete. 222873 27 115x6x22,23 C30-BF 10
222889 27 125x6x22,23 C30-BF 10 222043 27 178x6x22,23 C30-BF 10 222898 27 230x6x22,23 C30-BF 10
222854 27 100x6x16 A30-BF * 10 Rough grinding wheels for grinding different types of steel materials (incl. stainless steels and cast materials).
222858 27 115x6x22,23 A30-BF * 10 222860 27 125x6x22,23 A30-BF * 10 222863 27 178x6x22,23 A30-BF * 10 222865 27 230x6x22,23 A30-BF * 10
*Fe, S, Cl content 0.1%
BASIC 27
BASIC ROUGH GRINDING MACHINE
104
Tools DivisionMetal Cutting Tools
Metal Cutting Tools
Type No. Shape Dimensions Specification PU Comments
273884 27A 115x22,23 ZA40-B * 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.
273810 27A 115x22,23 ZA60-B * 10 273871 27A 115x22,23 ZA80-B * 10 273872 27A 125x22,23 ZA40-B * 10 273873 27A 125x22,23 ZA60-B * 10 273874 27A 125x22,23 ZA80-B * 10
*Fe, S, Cl content 0.1%
BASIC 27A
Type No. Shape Dimensions Specification PU Comments
320318 28A 115x22,23 ZA40-B 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.
320320 28A 115x22,23 ZA60-B 10 320322 28A 115x22,23 ZA80-B 10 320319 28A 125x22,23 ZA40-B 10 320321 28A 125x22,23 ZA60-B 10 320323 28A 125x22,23 ZA80-B 10
*Fe, S, Cl content 0.1%
BASIC 28A
Type No. Shape Dimensions Specification PU Comments
246870 28N 115x22,23 ZA40-B * 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.
246871 28N 115x22,23 ZA60-B * 10 246872 28N 115x22,23 ZA80-B * 10
BASIC 28N
BASIC FLAP DISCS
105
Tools DivisionMetal Cutting Tools
Metal Cutting Tools
Type No. Shape Dimensions Specification PU Comments
895678 11BT 110/90x55x22,2 A16-B 2 895669 11BT 110/90x55x22,2 A36-B 2
895679 11BT 110/90x55x22,2 C16-B 2 895670 11BT 110/90x55x22,2 C36-B 2 895671 11BT 110/90x55x22,2 C60-B 2
STANDARD 11BT
Type No. Shape Dimensions Specification PU Comments
895676 11ZB 110/90x55xM14 C16-B 2 895677 11ZB 110/90x55xM14 C60-B 2
STANDARD 11ZB
STANDARD CUP WHEELS
106
Tools DivisionMetal Cutting Tools
Speroni Pumps Made In Italy
Models:Domestic Range0.5HP, 1HP, 2HP
Submersible Range1 HP, 1.5HP, 2HP
Dewatering Range1HP, 2HP
Construction Range1.5HP, 2HP, 3HP
Special pressure Booster Range
Mono Block PumpsAll Ranges
Compressors-AIRMEC
50Lt,100Lt,150Lt,200Lt,500Lt
Generators Upto 10KVA
107
Tools DivisionPumps
Fasteners
108
Tools Division
Fasteners
108
Tools Division
Fasteners
109
Tools Division
Fasteners
110
Tools Division
111
Manhole Covers
Manhole Covers Tools Division
112
Manhole Covers
Manhole Covers Tools Division
113
Meter Boxes
Manhole Covers
Manhole Covers Tools Division
114
Tools DivisionManhole Cover - Fittings
Mechanical Splicing Systems
115
Tools Division
Mechanical Splicing Systems
116
Tools Division
Fischer Fixing Systems Division
Chemical Fixing
Chemical Anchor Fixng Kit
- Power Bond
- Epoxy mortar
, upto A0mm rebar
only for threaded rod application
- Vinyl elester
117
Fischer FIS SB 390 S - Super Bond
Fast setting with high bond strength forfixing threaded rod and rebars in all kindof base materials. Available in Capsule System also
Mechanical Fixings
FBS
Concrete Screw FBS THEFULLY REMOVABLE FIXINGIN CRACKED CONCRETEAND HOLLOW CORE SLABS
FDN Ceiling Nail
Cost Efficeint push through anchorfor multiple fixing of non structuraleapplications.
FNA II Nail Anchor
Installation friendly hammersetanchor for multiple fixings.
FHY Hollow Ceiling Anchor
The installation frierndly internallythreaded anchor for fixing in hollowcore concrete slabs.
118
Fischer Fixing Systems Division
Mechanical Fixings
119
Fischer Fixing Systems Division
Fischer
General Fixings
Universal Fixing UX
Nylon plug for all building materials.
Metal Frame Fixing FM The fixing for stress-free installation ofwindow and door frames with high fire resistance.
120
Fixing Systems Division
MEP Supports &Accessories
FUS 21D, FUS41D,FUS 62D
EMS 41 FEC FUS 41
FCN Clix M FCA Cantilever Arm FCN HK 41
UWS FAF FUF FFF
FSB 45 TKR FUF OC
121
Fischer Fixing Systems Division
MEP Supports &Accessories
FRSN FGRS FKS Plus FRS
FRS Triple FRSH
FRSP Clamps
FRS KFRSM M10/M12 / M16
122
Fischer Fixing Systems Division
Fire StopFire prevention is a critical consideration for those who are reponsible for creating the design,specification and construction of new buildings, with consideration in the ongoing maintenance ofoccupied premises.Effective firefighting within a building is generally achieved through a combinationof active and passive firestop systems and when used in conjunction with each other provide a balancedfire protection strategy.
Fischer FireStop systems cater to the needs of passive fire protection and conform to BS & AmericanStandards and are approved with Civil Defence of Sultanate of Oman.
123
Fischer Fixing Systems Division
124
Fixing Systems DivisionFischer
Angle Beads
The intended use of Angle Beads is to help the formation of corners and abutments which are resistant to chips, cracks and impact damage. Protecting corners & edges and giving better shape are the main purpose.
Plaster Stop Beads
Plaster Stop Beads are used for the. finishing andreinforcing of plaster edges. They provide a truestraight line and protect the plaster where it ismost vulnerable. They are available to suitvarious plaster depths.
Architrave Beads
Mainly used for decorative purposes to give achannel gap or a shadow between differentwalls .nishes (i.e., wall and ceiling or door andwindow reveals).
Architrave Beads Without Flange
Mainly used for decorative purposes to give ashadow between different walls finishes (i.e.,wall and ceiling or door and window reveals).
125
Expanded Mesh &Metal Products Blockwork & Plaster Accessories
Control Joint Beads
Designed to deal with normal initial stuccoshrinkage during the hydrating and curingstage of the portland cement stucco (generallyexterior or gypsum plaster interior) coats andminor thermal expansion and contraction.
Render Stop Beads
Major purpose is to obtain a lower edge toexternal Finishes and to protect stonework fromwater.
Corner Lath
Corner Lath is a jointless mesh, bent lengthwise inthe center and is used inside corner joints withdissimilar material base.
Expanded Metal Lath
Expanded Metal Lath is widely used as a plastering base for reinforcement against cracks. It is usedto provide a bond between dissimilar materials and at crack-prone areas adjacent to openings.It is highly recommended for reinforcing along lines of stress.
TMI plaster mesh comprises of Sheet Lath, Strip Lath and Coil Lath according to the sizes.
126
Expanded Mesh &Metal Products Blockwork & Plaster Accessories
Sheet Lath Strip Lath Coil Lath
Rib Lath
Rib Lath is a specially designed expanded metallath for the construction of suspended ceilingsand stud wall partitions. This lath has an integral stiffening ribs roll-formedduring manufacturing. The mesh areas of the lathare expanded.
The Rib Lath is easy to handle and can be cutwith handshears and bent to the required angles.
Reinforcement Mesh
Block mesh reinforcing in walls will help to combat windeffects, withstand the loading of material against the wall,control shrinkage, thermal and settlement effects andenable the wall to span across openings. TMI block meshis manufactured to customer specifications, which enablesits strength to be used with maximum efficiency.
TLB - eeT reddaL Truss Tee - BTT
CTB - renroC ssurT CLB - renroC reddaL
127
Expanded Mesh &Metal Products Blockwork & Plaster Accessories
Wall TiesTMI Wall Ties anchor plates are used to attach structural members or equipment to concrete structure.Plates and angles can also be used to frame openings in concrete walls or as shelf angles. They areused with precast or cast in place concrete
LintelTMI Steel channel Lintels provide open span supportover door and window apertures providing light weightsupport and efficient load bearing for all types of block.All TMI Lintels are manufactured using prime steelgalvanized with zinc which can be coated with blackthermoset polyester powder or black dual-coat epoxypaint which provides excellent long-term corrosionresistance.
AWSAnchor with support Two sided screw
punch anchor
ASP2Two sided slot anchor horizontal
AH-2ST
Z-plain tie bolt/screw-onZPSS
Bolt screw-on flat split-bend tie
LSSBSlot flat split-bend tie
LSSB-ST
L-plain tie slot with sleeve
LPSW-STPerforated tie special with sleeve
PTSWL-plain tie bolt/screw-on with sleeve
LPSW
LPSL-plain bolt/screw-on tie
LPTL-plain slot tieDove tail with rectangular
channel
WTRC
Dove tail with triangular channel
WTTC OCPTS Ocht channel with plain tiespecial
Ocht channel with triangular wire tie
OCTW
128
Expanded Mesh &Metal Products Blockwork & Plaster Accessories
Wall Ties
Vertical horizontal movement tie slot
VHM-ST1VM2Vertical movement tie Bolt screw-on
VHM-ST2Vertical horizontal movement tie Slot
VM1Vertical movement tie Bolt screw-on
Plain tie special PTS LPS-S
L-perforated special tie bolt/screw-on
LPS-STL-perforated special slot tie
L-bolt tie with cut endLBT
Flat two sided split-endFS2
L-slot tie with with u-cut end
LST
LPS-STCL-perforated slot special cavity tie
LPS-SCL-perforated bolt/screw-on special cavity tie
Cavity wall tie bolt/screw-on
CWT
Ceiling wall strap tieWTCW
Z wire tieZWT
Safety cavity tieSCT
Z-shape wire tieWTZ
Butterfly wire tie
WTBDouble triangle wire tie double drip
DTW-DD
L-bolt screw-on safety
LSSFL-bolt/screw-on split-endLSS
L-slot tie with split-endLSS-ST
FCWTFlat two sided split end cavity wall tie
Corrugated bolt wall tiesCGWT
Two sided split twist tieFS2F
129
Expanded Mesh &Metal Products Blockwork & Plaster Accessories
Drilling & Sawing Contracting Division
130
Coring ApplicationConcrete Grinding ApplicationDrilling, Anchoring and Rebar Fixing ApplicationWall Saw Cutting ApplicationWire Saw Cutting ApplicationProject Experience
Drilling & Sawing Contracting Division131132133134135136
Page No.
Coring on RCC Wall, Column, Slab, Floor and Beam from Dia 12mm to Dia 500 mm andany depth
Core Cutting Application:Coring Hole size - 12mm to 500mm diameter for any Reinforced concrete of thickness inhorizontal, vertical and inclined direction
131
Drilling & Sawing Contracting Division
Benefits of Diamond Cutting Technology System- Fast Cutting in Reinforced Concrete- Dust Free (Wet Cutting)- Cutting with Zero Vibration- Low Noise - Clear Edges of the Concrete- Accurate
Coring Application
Drilling & Sawing Contracting Division
Concrete Demolition Concrete Grinding Application
Concrete Scanning
132
- Grinding concrete- Removal of paint, epoxy, glue and other coatings from concrete- Preparation of concrete for Installation of new floorings / coatings- Elimination of irregularities in concrete- Repair of damaged concrete- Sealing preparation- Renovation works
Concrete Demolition Application: any thickness of the Plain Concrete and Reinforcedconcrete will be done Chipping, breaking & demolition by Electric BreakersPneumatic Breakers
Concrete Scanning: Scanning for Locating Rebars, Pipes, Conduits, Electric Cables, LiveElectric Cables, Post Tension Cables and other Objects in Concrete
Concrete Grinding Application
133
Drilling & Sawing Contracting Division
Drilling for Fischer Anchor Fixing (Mechanical and Chemical)
Drilling & Anchor Fixing Application: Drilling 6mm to 40mm and Fixing Machinical &Chemical Anchor Bolts besides all types of Rebars & Anchor bolts will be fixed inConcrete as per Fischer, Hilti and other Manufacturer's specification
Drilling, Anchoring and Rebar Fixing Application
Wall Saw Cutting Application
Wall saw Cutting for Wall, Slab, Column, Beam and Floor with 600 mm deep on RCC
Wall Saw - Concrete Cutting Application: Cutting Reinforced Concrete up to 600mmdeep in large opening for Windows, Door Openings, Beam, Column & Slab Cuttingswith Diamond Wall Saw Cutting System
134
Drilling & Sawing Contracting Division
Wall Saw Cutting Application
Wire Saw Cutting for Slab, Wall, Floor, Beam & Column with any deep on RCC Structures
Wire Saw - Cutting Application: Cutting reinforced concrete any depth for large Opening with any shape by using Diamond Wire Saw Cutting system
135
Drilling & Sawing Contracting Division
Wire Saw Cutting Application
Drilling & Sawing Contracting Division
Project Experience
Major Projects Mode of Work
Mechanical & Chemcial Anchor Fixing(for Chiller Plant ) Drilling & Core Drilling(for Chiller Plant, Sub Station & Steel StructureFixing) Concrete Demolition (at Valve Pits)
1. Salalah Airport
3. Seawage Treament PlantRebar Scanning ( for avoiding the Steel & ElectConduits) Core drilling & Concrete Demolition(for Pipe Lining up to Dia 350mm x 1 M deep)
4. Marble Granite Factory (Sohar)3M deep Coring for Cabling on RCC Foundation(for Cable Fixing through the Gang Sa Foundation)
5. Sohar PortCoring on RCC Foundation up to 1 M deep(for Crane Fxing & Moving)
6. Ghobra Flyover Drilling & Rebar Fixing with Fischer Chemical(for Extension Flyover)
Wall Saw Cutting for Pile Cutting from 600mm to800mm depth and 3.2 mtr dia Cutting for MicroTunnelling Purpose
7. Water Desalination Plant (Ghobra)
136
2. Muscat International Airport Coring Application (for Steel Structure Fixing)
Note
137
Head OfficeTel.: +968 2450 3915 Fax: +968 2450 3920
PO Box: 1827, P.C. 130, Al Athaibah, Sultanate Of Oman
Salalah ShowroomTel.: 968 2313 2915 Fax: +968 2313 2915
Shop No. 13 & 14, Near Al Mawasa ClinicSenaiyya, Salalah, Sultanate of Oman
Electrical
Instrumentation
Oil & GasLighting
2014CATALOGUE
2014 CA
TALO
GUE
Mechanical
ww
w.tecsintl.com
Sohar ShowroomTel.: +968 2675 3006 Fax: +968 2675 3007
PO Box: 505, P.C. 322, Falaj Al QabailSohar, Sultanate of Oman