Date post: | 27-Jun-2015 |
Category: |
Science |
Upload: | stratlab-limited |
View: | 211 times |
Download: | 3 times |
www.dot-red.com
Vials and ClosuresVials and Closures
www.dot-red.com
●red®
About the BrandAbout the Brand
●red® is the new name in quality engineered and manufactured products.
●red® branded products are available to customers worldwide through a network of officially appointed dealers
●red® branded products are supported by full technical and commercial back-up
www.dot-red.com
Chromatography vialsChromatography vials
Low cost and high quality Compatible with common
autosamplers Type I Class A Clear glass Type I Class B Amber glass Full range
Screw, crimp, snap neck Deactivated, limited volume
www.dot-red.com
●red® vials are...vials are...
From a quality, established European manufacturer.
Readily available, key lines stocked in UK High specification, manufacturing
tolerances available on request. Low, controlled, impurities based on
reliable sourcing from established tubular glass manufacturers.
www.dot-red.com
2mL Crimp Vials
Key Dimension mm Tol
H1 Overall Height 32.00 0.40
H3 Crimp Neck Height 3.00 0.20
H5 Neck Height 3.00 0.50
D1 Body Diameter 11.60 0.20
D2 Outside Mouth 10.80 0.20
D3 Inside Mouth 6.00 0.15
D4 Neck Diameter 8.30 0.30
S1 Body Thickness 0.90 0.05
S2 Bottom Thickness 0.60 min
RF Bottom Concavity 0.50 max
www.dot-red.com
2mL Snap Vials
Key Dimension mm Tol
H1 Overall Height 32.00 0.40
H3 Crimp Neck Height 1.20 0.15
H5 Neck Height 3.00 0.50
D1 Body Diameter 11.60 0.20
D2 Outside Mouth 10.80 0.15
D3 Inside Mouth 6.00 0.15
D4 Neck Diameter 8.50 0.50
S1 Body Thickness 0.90 0.05
S2 Bottom Thickness 0.60 min
RF Bottom Concavity 0.50 max
www.dot-red.com
2mL Screw Vials
Key Dimension mm Tol
H1 Overall Height 32.00 0.40
H2 Shoulder Height
H3 Neck + ThreadHeight 5.60 0.50
H4 Beginning of Thread 0.90 min
H5 Neck Height 2.50 0.50
D1 Body Diameter 11.60 0.20
D2 Outside Thread 9.50 0.20
D3 Inside Mouth 6.00 0.15
D4 Neck Diameter 8.00 0.50
P1 Thread Pace 1.20
S1 Body Thickness 0.90 0.05
S2 Bottom Thickness 0.60 min
RF Bottom Concavity 0.50 max
www.dot-red.com
Natural Rubber Septa
Covers Product codes: 130270, 130241, 130323 (and cap colour variations)
A 60 durometer, Natural Rubber material designed to optimal re-sealability when punctured with minimal bleed characteristics.
Original Properties – cured 30 minutes 154°C
–Specific Gravity 1.44
–Hardness (Shore A) 65.0
– Tensile Strength 2498 psi (17.22 Mpa)
– Elongation (%) 440%
– Tear Strength, Die C Method 208 ppi
www.dot-red.com
Silicone Septa
Covers Product codes: 130275, 130242, 130328 (and cap colour variations)
A 40 durometer white, addition cured silicone rubber compound that meets ASTM D2000M3FE408
Original Properties – cured 20 minutes at 160°C postcured 4 hrs at 200°C
–Specific Gravity 1.10 +/- .03
–Hardness (Shore A) 40 +/-5
– Tensile Strength 900 psi (6.21 MPa)
– Elongation (%) 500%.
– Tear Strength, Die C Method 80 ppi
www.dot-red.com
PTFE Film
PTFE (Teflon®) is a fluorocarbon film that has excellent chemical and temperature resistance.
PTFE exhibits very low permeability to liquids, gases, moisture, and organic vapours. For septa, it is used in conjunction with all polymers and is the barrier of choice for many applications.
Colors: Natural, Red, and Other Custom Colors
– Tensile Strength at Break 5000 psi (34.5 MPa)
– Elongation (%) 375%
– Thermal Melt Point 650F (342C)
www.dot-red.com
Further InformationFurther Information
Please visit www.dot-red.com Or contact your local distributor. Distributed by:
– Stratlab Ltd.,
– Unit 1, Norwood Road, March, Cambridgeshire,
– PE15 8QD UK.
– T(intl): +44 (0)1354 657000
– F(intl): +44 (0)1354 656675