On behalf of the entitled parties we are auctioning online against highest bid the well-maintained textile dyeing, printing and finishing machines of the company
SATI GRUPO TEXTIL, S.A.
Carretera de Ribes s/n km 3,5
08530 La Garriga (Barcelona)
Spain
Thursday, 26th of June 2014
Start: 10:00 a.m.
Viewing:
Thursday, 19th of June 2014 from 9.00 a.m. –17.00 p.m.
Online bidding is possible immediately!
www.netbid.com
ONLINEAUCTION
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Preparation
1 1 industrial vacuum cleaner, make: Industrias Fapp, type: AP- 315, serial no. 3155
2 1 electr. fabric roll forklift truck, make: Carrelli, type: TRS, (2002), serial no. 38932, max. lifting capacity 1,500/3,000 kg,
battery charging unit, covering defective
3 1 electr. fabric roll forklift truck, make: Carrelli, type: TRS/1, (2004), serial no. 04F04695, lifting capacity 2,000/4,000 kg,
battery charging unit
4 1 electr. commissioning lift truck, make: Crown, hour meter reading 3,048, battery charging unit
5 1 forklift reach truck (CAR-04), make: BT, type: BTOPT 1000, (1985), serial no. 161829, max. lifting capacity 1,000 kg, max.
lifting height 5,670 mm, battery charging unit
6 1 personnel working cage, f. forklift operation
7 1 re-rolling machine (TU 3), make: Samit, (1999), serial no. 1311, max. fabric width 3,000 mm, lifting structure w. electr. chain
hoist, bale crosshead, feeding station w. pneum. tilting unit, pneum. bale gripper, transfer belt, bogie sewing machine, make: Merrow, brushing machine w. 2 brushing units, lint extraction system, web straightening system, make: Bianco, type: Guida Compact CE, (1999), serial no. 990054, J-Box, fabric delivery f. rolls or laid fabric
8 1 fabric winder, make: Asisa, type: D-SIN-COMP, (1997), serial no. 1965
9 8 bale trolleys, dim. approx. 1,000 x 3,000 mm
10 1 storage system (fabric rolls), base area 3,000 x 17,000 mm, post height approx. 7,000 mm, posts embedded in concrete,
(requires cutting-off on ground level), 1 batch steel cores f. roll, approx. 20 units
11 1 forklift reach truck, make: Baumann, type: E 4 S 30/12/40, (1983), serial no. 3E9096, max. lifting capacity 3,000 kg, load
center 600 mm, dead weight 5,450 kg, hour meter reading 02462, forklift reach truck f. large fabric rolls, battery charging unit
12 1 hydr. fabric winder
13 1 hydr. fabric winder
14 1 hydr. fabric winder
15 1 hydr. fabric winder
16 1 hydr. fabric winder
17 1 continuous washing and bleaching machine (TRK), make: Küsters, (1998/99), max. fabric width 3,400 mm, consisting of:
non-stop unwinding unit, metal detector, 2-roller padding unit, make: ARIOLI, type: 22.11-1800, (1987), max. web width 2,000 mm, Chrom/Racolan, steaming tower, H approx. 6,000 mm, medium: steam, heat recovery system, 2 washing units, type: 836.61, vacuum dehumification, make: RKR, 3 washing units, type: 834.43, 2-roller padding unit, bleach tank (Flex-Nip), type: 272.18, with dosification system for 6 bleaching chemicals, make Contidos, type SA6, steam setting unit, type: 843.56, padding unit, type: 225.67, vacuum dehumification module, make: Evac, acid neutralization unit, padding unit, type: 222.56-3200, cylinder dryer, make: Wumag, 2 pillar units w. 8 drying cylinders each, volume approx. 1,640 l, max. temperature range 158 °C, heating medium: steam, fabric web storage, fabric cooling system, winding unit, web edge control, make: EL, plant control system, switchgears, air-conditioned
18 1 stenter frame (RA 6), make: Babcock, type: 5001, (1998), serial no. 3700, max. fabric width 3,400 mm, transportation vertical
needle chain/clip, 7 fields, direct gas heating, total length approx. 21,000 mm, fabric web storage, 2-roller padding unit, make: Küsters, type: 22.53-3400, (1998), autom. straightening system, make: Mahlo, type: Orthomat GRVMC- 12, (2005), web straightening system, make: E+L, type: LG 0611, 2 ultrasonic cutter heads, make: Ceus Textil, 2 cooling rollers, cooling medium: water, winding system, double-sided
19 1 industrial vacuum cleaner, make: Grizzly, serial no. 66285, power 1,200 W/230 V
20 2 stainless steel transport tanks, stainless steel, capacity approx. 350 l, mobile, drain on side, plastic transport tank, capacity
approx. 600 l
21 1 gallery storage platform, steel/painted black, floor space approx. 3,000 x 28,000 mm
22 1 batch screen printing cylinders, L 3,300 mm, suited f. fabric screen printing machine, make: Reggiani
23 1 gallery storage platform, steel, painted, floor space approx. 3,000 x 11,000 mm
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Chemical storage
24 6 tank storage frames, steel, different designs, total weight approx. 550 kg, storage shelf
25 1 storage tank (caustic soda), stainless steel, capacity approx. 2,000 l, 7 pneum. valve
26 2 storage tanks, stainless steel, capacity approx. 2,000 l per unit, electr. stirrer, drain on lower side
27 1 storage tank, stainless steel, capacity 4,000 l, electr. stirrer, drain on lower side, electr. feed pump, pneum. valve
28 1 double diaphragm pump, make
29 1 double diaphragm pump, make: Versa-Matic, mobile substructure
30 1 underfloor scale, make: Cely, type: B-59, min. weighing range 600 g/max. 150,000 g, (2012), weighing platform w. roller
conveyor
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
31 1 wall dissolver
32 1 cabinet for hazardous substances, make MPR, Typ Asecos 90
33 2 radial pumps
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Changing room
34 3 changing room lockers, metal, each with 4 doors, cabinet with safe compartments, metal, 10 doors, plastic rubbish bin,
capacity approx. 200 l
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Gallery storage
35 8 linear m. storage shelf, steel, zinc-coated, plugged design, post height approx. 2,000 mm, contents: machine spare parts and
accessories, cabinet, wood, contents
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Fabric inspection II
36 1 electr. forklift truck, make: FZ, type: FB 10 P-50 SE-300 P, serial no. 213910236, max. lifting capacity 1,000 kg, max. lifting
height 3,000 mm, hour meter reading 17215, battery charging unit, 1 batch fork extensions
37 1 doubling unit (GOBL 2), make: Tecnoteam, type: D 02 U, serial no. 190304, fabric width 3,400 to 1,700 mm, speed 0 - 60
m/min., hour meter reading 01430, portable sewing machine, make: Siruba, type: AA-6
38 1 pallet truck, max. lifting capacity 2,000 kg
39 1 bale foil packaging machine, make: MT, max. bale length approx. 2,000 mm, autom. stacking unit
40 1 overlock seaming machine, make: Merrow, type: 60 D 3 B, serial no. 142984, mobile substructure
41 1 ultrasonic edge trimming machine (VELAS), max. web width 1,550 mm, anti-static system, 2 ultrasonic generators, make:
Ceus, type: US 500
42 1 hydraulic bale lifter
43 1 fabric inspection machine, max. fabric width 1,800 mm, mobile substructure
44 1 fabric inspection machine, max. fabric width 3,400 mm
45 1 fabric inspection machine (EKA 2), make: Testa, type: 111 YBT EK 2 P, (2000), serial no. 3378, machine no. 321, max.
fabric width 3,400 mm, with batching unit, 2 hot air blower, make: Leister, for edge processing, label printer, make: Incas, hour meter reading 009936
46 1 fabric inspection machine (EKA 1), make: Testa, type: 111 LBT EK 2 + /ATRIANGOLO, (1998), serial no. 3272, machine no.
264, max. fabric width 3,400 mm, batching unit, 2 hot air blowers, make: Leister, for edge processing, label printer, make: Incas, hour meter reading 010243
47 1 gallery storage platform, steel, floor space approx. 6,500 x 35,000 mm, platform height approx. 4,000 mm, fall protection,
staircase, floor covering, sheet steel, safety door, drive:, electr. motor, clear width 3,000 mm
48 1 pressurized-air tank, steel, upright design, capacity approx. 500 l
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Fabric inspection I
49 1 fabric inspection machine (R 5), make: Testa, type: 111 GBF, (2000), serial no. 3376, max. fabric width 3,400 mm, label
printer, make: Incas, control system, hour meter reading 016503
50 1 fabric inspection machine (R 1), make: Testa, type: 111 GBFM, (2000), serial no. 3377, max. fabric width 3,400 mm, label
printer, make: Incas, control system, hour meter reading 010122
51 1 fabric inspection machine (R 7), make: EMIT, model B 3 M, series VP, serial no. 890702, max. fabric width 3,400 mm, inkjet
printer, control PC, hour meter reading 04012
52 1 bridge crane, make: Vicinay, max. lifting capacity 1,000 kg, 2 rails, clear width 2,000 mm, ground operation, base area support
frame 2,000 x 4,000 mm, height approx. 4,000 mm
53 1 hydr. fabric winder, make: Asisa, type: E-C, (1983), serial no. 2507
54 1 fabric inspection machine (R 9), make: Testa, type: 111 BF, (1998), serial no. 3270, max. fabric width 3,400 mm, label
printer, make: Incas, control system, hour meter reading 017006
55 1 fabric inspection machine (R 2), max. fabric width 1,800 mm, hydraulic batch winder, make: Asisa, PC
56 1 fabric inspection machine (R 8), make: Testa, type: 111 BF, (1998), serial no. 3271, max. fabric width 3,400 mm, label
printer, make: Incas, control system, hour meter reading 019269
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Changing room / Fabric inspections - Ladies
57 14 changing room lockers, metal, each with 2 doors
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Passage fabric inspection 1/2
58 1 autom. high-speed gate, make: Ferrosol, (2007), serial no. 2237, clearance W/H 3,500 x 4,000 mm
59 1 autom. high-speed gate, make: Ferrosol, (2007), serial no. 2236, clearance W/H 3,500 x 4,000 mm
60 1 autom. high-speed gate, make: Ferrosol, (2007), serial no. 1622, clearance W/H 3,500 x 3,500 mm
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Print shop II
61 1 rotary screen printing machine (ROTR 2), make: Reggiani, type: Renoir Futura, (1995), 12 printing units, magnetic, max.
web width 3,200 mm, hour meter reading 20266, non-stop feeder, make: Corino, type: Entrata Stampa, (2007), serial no. 08B/07, capacity 100 m, web edge control, make: Mahlo, type: Orthomat, dryer, 3 stations, indirect thermal oil heating, total length 14,000 mm, control system, make: Siemens, type: S 5, air-conditioned switchgear
62 1 industrial vacuum cleaner, make: Grizzly
63 1 tumbler (TUMB 1), make: Jaume Anglada Vinas, type: TDR-3,2 D-F, (1999), serial no. 990015, connected load 120 kW/400 V,
max. fabric width 3,200 mm, 2 burners, make: Weishaupt, direct heating w. natural gas, autom. straightening system, make: Corino, 2-roller padding unit, lint extraction system, hour meter reading 22069, control system, equipment: 6
64 1 washing unit f. screen printing rollers and doctor blades (LAVML 1), make: FIMAT , type: SWM.C 343500, (1997), serial
no. 012263001, stainless steel design, max. roller length approx. 3,400 mm, water reservoir, capacity approx. 1,200 l
65 1 gallery storage platform, steel, painted, base area 4,000 x 7,500 mm, post height approx. 3,500 mm, storage gallery f. rotary
screen printing rollers, 5 linear m. pallet shelf, steel, zinc-coated, plugged design, post height approx. 2,500 mm
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Fabric printing I
66 1 central ink mixing plant (COCESTAMP), make: ias, type: Vario Mixer R 97 Compact, (1997), serial no. 3129, hour meter
reading 01326, control PC, autom. continuous scale, make: Mettler, dye dosing station, dye mixing station, 9 feed tanks, stainless steel, capacity 1,300 / 950 l, mixing tank, stainless steel, capacity approx. 500 l, stirring unit, extraction hood, vacuum filter, vacuum pump, dissolver cleaning unit, digital floor scale, make: Cely, type: B-51, min. weighing range 700 g, max. weighing range 150,000 g, weighing bridge w. roller conveyor
67 1 coating unit (RE 1), max. fabric width 3,200 mm, consisting of: inspection machine, head unit, make: Stork, type: RSF
processor, (1984), with air knives / about cylinder, fabric infeed, cylinder coating machine, make: Stork, stenter frame, make: Famatex, (1984), serial no. 641692, transport type: vertical needle chain, 3 stations, tunnel length 10,000 mm, indirect thermal oil heating, hour meter reading/stenter frame 01773, 3 pneumatic drum feed pumps f. highly viscous dyes, 3 coating knives for head unit Stork
68 1 calender, make: Asisa, type: calandra, (1984), serial no. 2622, max. fabric width 3,100 mm, 2-roller calender, rubber/chrome
69 1 double diaphragm pump, subframe, mobile
70 1 screen printing machine (PL), make: Buser, type: 1680/18000, (1974), serial no. 587, max. web width 1,680 mm, table length
18,000 mm, 13 ink doctor blade stations, drying tunnel, make: Buser, type: F 1680, (1974), machine no. 587, thermal oil heating, storage shelf, 1 batch accessory parts f. screen printing machine
71 1 batch screen printing frames, different sizes and designs, approx. 500 units
72 1 rotary screen printing machine (ROTR 1), make: Stork, type: RD 4, (1973), serial no. 104730, 12 printing units, magnetic,
max. web width 1,650 mm, web edge control, make: EL, type: AWF 10, dryer, 3 stations, material flow on 3 levels, length 11,000 mm, indirect steam heating, fabric delivery, hour meter reading 03577
73 1 batch screen printing cylinders, length 1,800 mm, different designs, approx. 750 units
74 18 linear m. storage shelf, post height approx. 4,500 mm, double-sided, plugged design, shelf depth approx. 1,600 mm,
wooden shelf levels boards
75 1 steaming unit (dye setting), make: Stork-Brabant, type: HS 200, (1980), serial no. 501316, max. fabric width 3,200 mm,
overhead conveyor system, capacity 200 linear m. dye fabric, indirect steam heating, hour meter reading 7837, control system, make: AEG
76 1 calender, make: Küsters, type: 212.50-3200, (1977), serial no. 10294976, max. fabric width 3,300 mm, 2-roller calender,
chrome/Racolan, indirect thermal oil heating, hour meter reading / motor 1 1746, hour meter reading / pressure cylinder 60701, metal detector, make: EL, fabric delivery w. fabric winder and dancer
77 1 sanforizing machine, make: Tepa, type: 31000, (1997), serial no. 31161, max. fabric width 3,300 mm, indirect steam heating,
mini stenter frame, web straightening device, make: Bianco, type: guida compact CE, (1997), serial no. 970252, hour meter reading 03921, crane system, consisting of: 2 crane rails, 2 manual chain hoists
78 1 printing roller washing unit, stainless steel, suited f. screen printing/coating machines, make: Stork, items 67 + 72
79 1 doctor blade washing unit, make: Buser, stainless steel, suited f. screen printing machine, make: Buser, item 70
80 1 hydr. fabric winder, serial no. 709921
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Changing room/Fabric printing I
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
81 2 cabinets w. safe compartments, 10/14 doors
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Chemical storage
82 1 analogue beam balance, make: Sauter, max. weighing range 10 kg, aluminium design
83 40 linear m. storage shelf, steel, zinc-coated, post height 2,000 - 2,300 mm, shelf boards, wood, different designs
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dye laboratory
84 1 matching cabin
85 1 laboratory stirrer, make: Heidolph, type: RZR 1, serial no. 16530, tripod
86 1 stencil production machine, make: Johannes Zimmer, type: MINI MDF 337, (1988), serial no. 86043
87 1 warming cabinet, make: Selecta, type: 140 D, serial no. 120390, power 3,000 W/400 V
88 1 tool cabinet, metal, dim. approx. 950 x 1,950 mm, 2 doors
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Section Sailcloths
89 1 high-speed gate, make: Ferrosol, type: Fero-Roll 200, serial no. 1731, clearance W/H 2,200 x 3,000 mm, gate control
90 1 drum washing unit, make: Tepa, stainless steel design
91 1 drum washing unit, make: Tepa, type: LAB, (1985), serial no. 32-107, stainless steel design
92 1 calender (CA 3), make: Küsters, type: 212,50-1600, (1987), serial no. 110-20306-01, max. fabric width 1,600 mm, 2 cylinders,
chrome/Racolan, cooling cylinder, metal detector, make: EL, type: MDA 0101, edge monitoring unit, control system, make: Küsters, 2 spare rollers, Racolan
93 4 manual chain hoists, make: Vicinay, max. lifting capacity 3,200 kg per unit, 2 crane rails
94 1 crashing machine (MARR 1), make: Kristall, type: Conticrash-E, (2000), serial no. 0454301, hour meter reading 01308, 7
fabric transport boxes, dim. approx. 1,000 x 1,000 x 1,000 mm
95 1 top dyeing machine, make: Stork, max. fabric width 2,000 mm, subframe, mobile
96 1 wall-mounted slewing crane, make: Vicinay, type: ABK 0- 505-U, max. lifting capacity 500 kg, jib 3,000 mm, ground operation
97 1 warping machine, make: Torres, (2001), consisting of: fabric infeed w. yarn cutter, make: Lamperti, max. web width 3,200
mm, (2001), serial no. 16, metal detector, make: Controllor, warping machine, make: Torres (TMT), type: GCA/118, (1985), serial no. 1526, max. web width 3,200 mm, hour meter reading 10604, fabric delivery, laying unit
98 1 textile hot cutting unit, make: HD Ingeneering Ltd, max. fabric width approx. 2,200 mm, 12 cutters
99 1 ironing press, make: Eurostir, type: E 150 M, serial no. 1154, subframe, mobile
100 4 storage shelves, steel, painted, L/W/H per unit: 3,000 x 1,500 x 2,300 mm
101 1 raising machine (ESM 1), make: Lamperti, type: SMB / A, (2001), serial no. 75/03, max. fabric width 3,000 mm, automatic
material detection, 2 raising rollers, front/backside processing, brushing unit, silicone brush, control system, make: ESA, type: VT 585 W
102 1 central lint extraction system, consisting of: radial fans, lint filter, make: Talleres Mector, type: Filtro-Compactador, (2003),
serial no. 153, exhaust air filter, duct system
103 28 linear m. storage shelf, steel, zinc-coated, post height approx. 3,000 mm (without contents)
104 3 storage shelves, steel, painted, L/W/H approx. 3,000 x 1,500 x 2,200 mm per unit, shelf boards, wood
105 1 Diesel forklift truck (CAR-09), make: Toyota, type: 5 FD 45, serial no. 20446, load capacity 4,000 kg, max. lifting height 3,000
mm, dead weight 5,960 kg, hour meter reading 08118
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Changing room I / Sail cloth production
106 1 batch lockers, each with 2 doors, approx. 22 units
107 1 batch lockers, metal, each with 2 doors, approx. 26 units, 1 batch benches
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dyeing shop
108 5 cabinets w. safe compartments, 3x 10 doors, 2x 2 doors
109 1 beam dyeing apparatus, make: Noseda, type: TS 11100, (1987), man. no. 4318, serial no. CO2434/87, capacity 4,000 l, max.
temperature range 143 °C, max. pressure 5 bar, pre-mixing station f. next process step, horizontal pump arrangement, automatic dosing unit f. additives, frequency converter, flow meter, switchgear, stainless steel, hour meter reading 009484, make: EAS, special machine
110 1 beam dyeing apparatus (AU 11), make: Noseda, type: TS 11100, (1987), man. no. 4319, serial no. CO2435/87, capacity
4,000 l, temperature range 143 °C, max. pressure 5 bar, hour meter reading 017620, control system, make: EAS
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
111 1 beam dyeing apparatus (AU 12), make: Ilmatec, type: CT/8-600, (1992), serial no. 175, man. no. 2239, capacity 1.5 m³, max.
temperature range 140 °C, max. pressure 4 bar, electr. flow meter, dosing pump, differential pressure compensation, hour meter reading 037255, switchgear, stainless steel, frequency converter, flow meter, control system, make: EAS
112 1 beam dyeing apparatus (AU 13), make: Ilmatec, type: CT/C-600, serial no. 176, man. no. 2239, capacity 1.5 m³, max.
temperature range 140 °C, max. pressure 4 bar, hour meter reading 037105, control system, make: EAS
113 1 jet dyeing plant, make: Ilmatic, type: Univerflow- 250/96, (1996), serial no. 204, man. no. 2634, capacity 3.3 m³, max.
temperature range 140 °C, max. pressure 3.5 bar, exchangeable injectors, dosing pump, hour meter reading 018578, frequency converter, flow meter, control system, make: EAS
114 1 beam dyeing apparatus, make: Ilmatec, (2006), man. no. 4107, capacity 3,325 l, max. temperature range 150 °C, max.
pressure 4 bar, feed tank f. next dyeing step, electr. flow meter, make: ABB, electr. dosing unit, autom. self-cleaning unit, special equipment w. custom design - loading machine/water filling level, switchgear, stainless steel, hour meter reading 012987, frequency converter, flow meter, control system, make: EAS
115 1 dry cleaning machine (RI 1), make: Rimar, type: SF Spezial, (1994), serial no. 05/094, max. fabric width 3,600 mm, control
system, conditioning machine for PCE
116 1 rail-mounted sewing machine, make: Merrow, type: GO D 3 B, serial no. 142609, rail length 3,000 mm
117 1 double diaphragm pump, pneumatic drive, mobile substructure
118 1 beam dyeing apparatus (AU8), make: Noseda, (1977), serial no. 4110, capacity approx. 4,000 l, max. pressure 5 bar, feed
tank f. quick media exchange in case of product change, hour meter reading 023985, control system, make: EAS
119 1 beam dyeing apparatus (AU7) , make: Noseda, (1970), serial no. 3845, capacity 2,500 l, max. pressure 6 bar, dosing unit,
electr. flow meter, inlet for special dyes, heatable feed tank, steam, hour meter reading 037766, control system, make: EAS
120 1 jet dyeing apparatus (JET 2), make: Ilmatec, type: Univerflow-400, (1997), serial no. 2704, machine no. 207, capacity 5 m³,
max. temperature 140 °C, max. pressure 3.5 bar, dosing unit, frequency converter, flow meter, one sealing cap is missing
121 1 beam dyeing apparatus (AU 6), make: Noseda, type: TSA D 1400/3500, (1999), serial no. 4713, machine no. 99/300038/CO,
capacity 5,000 l, max. temperature 143°C, max. pressure 7 bar, differential pressure measuring system, dosing unit, fluxometer, feed tank f. mixing of special dyes, 2 dyeing cylinder, water consumption reduction system, frequency converter, flow meter, hour meter reading 015339, switchgear, stainless steel, control system, make: EAS
122 1 beam dyeing apparatus (AU 5), make: Noseda, type: 5, (1963), serial no. 3412, max. pressure 5 bar, capacity 2,500 l, hour
meter reading 037686, control system, make: EAS
123 1 beam dyeing apparatus, make: Noseda, type: 6, (1966), serial no. 3584, capacity 2,500 l, max. pressure 5 bar, differential
pressure compensation, dosing unit, electr. flow mixing unit, feed tank for special dyes, heating, heating medium: steam, frequency converter, flow meter, frequency converter, flow meter, hour meter reading 030427, control system, make: EAS
124 1 beam dyeing apparatus (AU3), make: Noseda, (1973), serial no. 3936, capacity 4,000 l, max. pressure 6 bar, electr. flow
mixing unit, differential pressure compensation, hour meter reading 008321, switchgear, stainless steel, control system, make: EAS
125 1 beam dyeing apparatus (AU2), make: Noseda, (1971), serial no. 3846, capacity 4,000 l, max. pressure 6 bar, feed tank for
special dyes, hour meter reading 030341, control system, make: EAS
126 1 beam dyeing apparatus (AU), make: Noseda, (1971), serial no. 3847, capacity 4,000 l, max. pressure 6 bar, electr. flow
meter, make: ABB, dosing unit, computer-controlled salt dosing system, feed tank for special dyes, hour meter reading 030673, frequency converter, switchgear, air-conditioned, control system, make: EAS
127 1 ISAKA jet dyeing apparatus, make: Noseda, type: CUT SR 1L, (2006), serial no. 5086, capacity 100 kg, max. temperature
143 °C, max. pressure 5 bar, injector incomplete, hour meter reading 004753, switchgear, stainless steel, control system, make: EAS
128 1 beam dyeing apparatus , make: Cabsa, type: ROYHH2/6/35, (1988), serial no. 693, capacity 600/400 l, max. temperature
range 140°C, max. pressure 5 bar
129 4 cabinets w. safe compartments, 3 units w. 1 door, 1 unit w. 2 doors
130 1 HT jet dyeing apparatus (ET3), make: MCS, type: Multiflow XJ HT , (2001), serial no. C/4528, capacity approx. 500 kg, max.
temperature 141°C, max. pressure 2.76 bar, 3 injectors, 1 rope, emergency water tank, capacity 3,000 l, electr. flow meter, feed tank f. quick product change f. preparation of next dyeing process, lint screen, switchgear, stainless steel, frequency converter, hour meter reading 026618, control system, make: EAS
131 1 jigger (JI2), make: ASISA, capacity approx. 2,000 l, dyeing weight approx. 800 kg, hour meter reading 004011, control system,
make: EAS
132 1 jigger (JI 1), serial no. 16021, max. fabric width 3400 mm, capacity 800 kg, hour meter reading 03437, control system, make:
VH
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
133 1 beam dyeing apparatus, make: Noseda, (1967), serial no. 3656, capacity 250 l, max. pressure 5 bar, dyeing weight 25 kg
134 1 HT jigger (JI 5), max. fabric width 1800 mm, capacity 1,000 l, max. temperature 135°C, max. dyeing weight 500 kg, hour meter
reading 07379, control system, make: Asisa, machine needs repair
135 1 jigger (JI 6), make: Asisa, (1988), capacity 3,000 l, dyeing weight 1,500 kg, max. beam length 3,300 mm, hour meter reading
003648, switchgear, stainless steel, control system, make: EAS
136 1 fabric rope opener (OBCO), make: EL Erhardt & Leimer, type: SDM 1501, (1995), max. fabric width 3,400 mm, wringing
head, centering unit, stainless steel design, hour meter reading 003088, fabric delivery, laying unit
137 1 crane unit, consisting of: 1 electr. chain hoists, make: Vicinay, max. lifting capacity 4,000 kg, length of load spreader 5,000
mm, crane rail
138 1 horizontal yarn dyeing apparatus, make: Loris Bellini, type: RBNO 1800/2000, (2001), serial no. IN2000252, capacity bath
7,080 l, capacity 400 - 650 kg yarn, indirect steam heating, max. temperature 160°C, pressure 5 bar, hot discharge f. polyester dyeing, hour meter reading 021170, switchgear, stainless steel, control system, make: EAS, 3 bobbin carriers w. 48 stations per unit, 3 resting frames
139 1 horizontal yarn dyeing apparatus (TFIL35), make: Loris Bellini, type: RBNO 1800/2000, (1999), serial no. IN10499, capacity
bath 7,080 l, capacity 400 - 650 kg yarn, indirect steam heating, max. temperature 160°C, pressure 5 bar, hot discharge f. polyester dyeing, hour meter reading 027693, switchgear, stainless steel, control system, make: EAS, 3 bobbin carriers w. 48 stations per unit, 3 resting frames, synchronous operation w. yarn dyeing apparatus (item 140) possible
140 1 yarn dyeing apparatus (TFIL34), make: Loris Bellini, type: RBNO 1800/2000, (1999), serial no. IN10599, capacity bath 7,080
l, capacity 400 - 650 kg yarn, indirect steam heating, max. temperature 160°C, pressure 5 bar, hot discharge >100°C f. polyester dyeing, hour meter reading 026865, switchgear, stainless steel, control system, make: EAS, 3 bobbin carriers w. 48 stations per unit, 2 resting frames, scissor lifting table, synchronous operation w. yarn dyeing apparatus (item 139) possible
141 1 digital platform scale, make: CELY, type: B-60, (2012), min. weighing range 600 g, max. weighing range 15 kg
142 1 electr. high-lift truck , make: Armanni, type: Euro Alfa small , (1995), serial no. 12367, max. lifting capacity 500 kg, max. lifting
height 1,600 mm
143 1 rail trolley, stainless steel, for bobbin carriers
144 1 tool cabinet, metal, 2 doors, 950 x 1,950 mm
145 1 vertical yarn dyeing apparatus, make: Loris Bellini, type: RBNV 550/1320, (2007), indirect steam heating, hour meter reading
013069, 2 yarn carriers, mixing station, switchgear, stainless steel design, control system, make: EAS
146 1 vertical yarn dyeing apparatus (TFIL 38), make: Noseda, type: TFAS1020/2000, (2004), serial no. 14980, module B & F,
category IV, indirect steam heating, max. temperature 170°C, max. pressure 7 bar, capacity 700 - 1,200 l, electr. flow meter, dosing unit, emergency water tank, capacity 1,000 l, hour meter reading 21701, switchgear, stainless steel design, control system, make: EAS, 3 yarn carriers
147 1 vertical yarn dyeing apparatus (TFIL 37), make: Noseda, type: TFAS1020/2000, (2002), serial no. 127300053/CO, module B
& F, category IV, indirect steam heating, max. temperature 170°C, max. pressure 7 bar, capacity 700 - 1,200 l, electr. flow meter, dosing unit, emergency water tank, capacity 1,000 l, hour meter reading 21769, switchgear, stainless steel design, control system, make: EAS, 3 yarn carriers
148 1 rewinding machine (AB), make: CEMSA SERRA, type: 9,15 Y TIN, (1976), serial no. 1.797
149 1 rewinding machine
08530 la 08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dyeing shop
150 1 yarn drying chamber (SGA1), make: Galvanin, type: ERSP, (1997), serial no. 921, L/W/H 3,000/3,000/2,000 mm, heating
medium: steam, hour meter reading 15003, control system, make: Galvanin, capacity 4 yarn trolleys, 8 yarn drying trolleys
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dyeing shop
151 1 yarn drying chamber (SGA1), make: Galvanin, type: ERSP, (1998), serial no. 1013, L/W/H 3,000/3,000/2,000 mm, indirect
steam heating, hour meter reading 26363, control system, make: Galvanin, capacity 4 yarn trolleys, 8 yarn drying trolleys
152 1 yarn carrier handling system, make: Dalmec, type: PMF, (2006), serial no. 0630860, max. lifting capacity 15 kg
153 1 electr. chain hoist, make: Vicinay, type: ABK36, max. lifting capacity 1,600 kg, crane rails, length approx. 5,000 mm, ground
operation
154 1 electr. winch, make: Vicinay, max. lifting capacity 2,500 kg, crane rail, length approx. 5,000 mm, ground operation
155 1 yarn centrifuge, make: Loris Bellini, type: HCVC 6/1320, (1999), serial no. IN10699, max. speed 1,000 rpm, pillar weight 29
kg, max. thread setting (dry) 0.5 kg/dm³, retainer for 6 yarn carriers, hour meter reading 19058, control system, make: Bellini, manipulator, make: Dalmec, max. load capacity 80 kg, platform structure
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
156 1 yarn centrifuge, make: Benguerel, type: H-9, (1973), serial no. 636, ref. 956, Ø 1,350 x 600 mm, 75CVA, 748 rpm
157 1 electr. hand-guided lift truck, make: FAC, type: SBE/1610, (2001), serial no. 34817, max. lifting capacity 1,000 kg, max.
lifting height 1,600 mm
158 1 hydr. fabric winder, make: Asisa, type: DESCOMP, (1983), serial no. 2491
159 1 hydr. fabric winder, make: Asisa, type: DES-COMP
160 1 winding machine (MAEN1), make: Tapalsa, type: 115-B, (1998), serial no. 4394, max. fabric width 3,600 mm (2 x 1,600 mm),
web straightening system, make: Corino, vacuum demoisturizing unit, make: TVE, vacuum pump, hour meter reading 28411
161 1 hydr. fabric winder, make: Asisa
162 1 hydr. fabric winder, make: Asisa
163 1 dyeing cylinder transportation system, make: Vicinay, 2 crane trolleys, max. lifting capacity 3,200 kg per unit, ground
operation, 1 x radio remote control, 1 x digital crane scale, 2 rail turnouts, total rail length approx. 70,000 mm, 2 lifting beams, make: Bandatex, max. lifting capacity 3,200 kg per unit, length approx. 4,000 mm per unit, 6 fixtures, adjustable suspension points
164 1 Diesel forklift truck, make: Toyota, type: 5FD45, serial no. 20368, rated lifting capacity 4,000 kg, dead weight 460 kg, max.
lifting height 4,500 mm, hour meter reading 11241, semi-cabin
165 1 dyeing padding unit (FU 7), make: Küsters, type: 212/1800, max. fabric width 1,800 mm, infrared dryer, make: Asisa, direct
gas heating, dosing unit, make: Sedo, for alkaline dyes
166 1 dyeing padding unit, make: Küsters, type: 105/4200, (1963), serial no. 8485/63, max. fabric width 4,400 mm, hour meter
reading 04404
167 1 hydr. fabric winder, make: Asisa
169 1 embossing calender (CA 1), make: Küsters, type: 212.50/1800, (1976), serial no. 10.257.755, max. web width 1,800 mm,
thermal oil heating, metal detector, available equipment, 2 x embossing cylinder (1 x Moiré), nylon counter-pressure rollers, hour meter reading 11385
170 1 electr. winch, max. lifting capacity 2,000 kg, spreader, length approx. 2,000 mm, ground operation
171 1 fabric winder station, length approx. 4,500 mm, 4 hydraulic fabric winders, make: Danfoss
172 1 fabric winder station, length approx. 4,500 mm, 4 hydraul. fabric winders, make: Danfoss
173 1 fabric winder station, length approx. 4,500 mm, 1 hydraulic unit, 4 hydraul. fabric winders, make: Sauer Danfoss
174 1 stenter frame, make: Famatex, type: Compact MP, (1971), serial no. 703150, max. fabric width 3,400 mm, type of
transportation - vertical needle chain/clip, 7 fields, indirect thermal oil heating, total length approx. 22,000 mm, brushing station w. dedusting unit, make: Reggiani, web straightening system, make: Bianco, type: Compact MP, (1992), serial no. 920188, padding unit, make: Küsters, type: 222.53-3400, (1971), serial no. 10003 900, infrared drying unit, make: INDUTHERM, Model Infrawave-Q, type: 4x12 DG, (2005), serial no. 51562/1, connected load 1,440 kW, direct heating w. natural gas, autom. straightening system, make: Mahlo, type: Orthomat FMC-7a RFMC 76aN, (1986), ultrasonic edge cutting system, make: CEUS, fabric delivery, make: Samit, type: RS85
175 1 hydr. fabric winder, make: Asisa, type: EC, (1985), serial no. 2820
176 1 stenter frame (9), make: Babcock, type: 5301, (1999), serial no. 99140-001, max. fabric width 3,400 mm, type of transportation
- vertical needle chain/clip, 7 fields, direct heating w. natural gas, non-stop feeder, web stretcher, padding unit, make: Küsters, type: 222.53-3400, (2000), serial no. 106-75839-01 (fixing/colouring), web straightening system, make: Mahlo, type: RFMC-10P, (1999), serial no. 22/636P/20569, steaming station, indirect steam heating, ultrasonic edge cutting unit, make: Ceus, 2 cutter heads, 2 ultrasonic generators, make: Ceus, 2 x winder w. anti-static system, make: Mahlo, laying unit, air-conditioned switchgears, control system, make: Babcock
177 1 unwinding unit (self-constructed), max. fabric width 2,400 mm
178 1 hydr. fabric winder, make: Asisa, (1978), serial no. 1738
179 1 electr. fabric roll forklift truck, make: STP, max. lifting capacity 1,100 kg, battery charging unit
180 1 electr. fabric roll forklift truck, make: FAC, type: TRS, (2000), serial no. 31176, max. lifting capacity 1,500/3,000 kg, battery
charging unit
181 1 commissioning lift truck
182 1 telescopic working platform (CAR-10), make: Genie, type: PLI 24, serial no. 3192-3514-F, max. lifting capacity 300 lbs, max.
lifting height 24 ft.
183 1 electr. fabric roll forklift truck, make: FAC, type: Trainatore, (2004), serial no. 04F00309, max. lifting capacity 1,100/3,000
kg, battery charging unit
184 1 floor cleaning machine, make: Floorpool, type: amber66, (2006), serial no. 002033, battery charging unit
185 1 pallet truck, make: Lifter, type: GS, (2001), serial no. 563437, max. lifting capacity 2,000 kg
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
186 1 industrial vacuum cleaner, connected load 3.0 kW
187 1 pallet truck, max. lifting capacity 2,500 kg
188 1 storage tanks, stainless steel, capacity approx. 450 l, sealing cover, mobile
189 1 workbench, make: Küsters, metal, length approx. 2,000 mm, 3 cabinets, metal, 2 x 4 doors 1 x 1 door, console cabinet, metal
190 1 transport tank, stainless steel, capacity 300 l, mobile
191 1 tipping trough, metal, capacity 1,700 m³, forklift fixture, tipping system
192 1 tipping trough, metal, capacity 1,700 m³, forklift fixture, tipping system
193 1 tipping trough, metal, capacity 1,700 m³, forklift fixture, tipping system
194 1 transport tank, stainless steel, capacity 300 l
195 1 transport tank, stainless steel, capacity 300 l
196 1 hydr. fabric winder, make: WEDA
197 2 plastic transport tanks, capacity approx. 600 l
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dye preparation - Dyeing shop
198 1 paternoster, make: Ugolini, type: Magazino Hot MR ZRD 11, (2002), serial no. 1370, max. load per bay 800 kg, 10 bays, bay
length approx. 4,600 mm, designed f. powdered dyestuff, w. extraction system, digital counting scale, control system
199 4 dye mixing tanks, stainless steel, capacity 140 l per unit, 3 x steam-heated, 4 x stirrer, 4 x control system
200 8 dye mixing tanks, stainless steel, capacity 6 x 140 l, 2 x 250 l, 8 x steam-heated, 8 stirring units, 8 x control system
201 7 dye mixing tanks, stainless steel, capacity 2 x 140 l, 5 x 250 l, 7 x steam-heated, 6 stirring units, control system
202 5 dye mixing tanks, stainless steel, capacity 3 x 210 l, 2 x 380 l, 3 x stirrer, control system
203 1 barrel stirrer
204 1 digital platform scale, make: Celi, type: B-56, (2011), min. weighing range 1,200 g, max. weighing range 160 kg
205 1 mixing tanks, stainless steel, capacity 780 l, electr. stirrer
206 1 mixing tanks, stainless steel, capacity 410 l, electr. stirrer
207 1 double diaphragm pump
208 1 cabinet, metal, 2 doors, 950 x 1,950 mm
209 12 linear m. storage shelf, metal, painted, plugged and screwed design, wooden shelf levels boards, post height 2,000 - 2,300
mm, contents, console cabinet
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Dye laboratory
210 1 colour analyzer, make: Datacolor, type: Spectraflash 600, control system and control PC missing (software)
211 1 autom. laboratory dosing device, make: Salce, type: Dosatrice Volumetrica SBM 120/24, (2004), serial no. CE0241, control
PC, monitor
212 1 washing machine, make: Fagor
213 1 laboratory dyeing apparatus, make: SHM/ Datacolor, type: Ahiba Nuance Top Speed II/B, (2005), serial no. 06321, max.
temperature range 140 °C, 15 stations
214 1 laboratory dyeing apparatus, make: Salvis, type: Nuance, serial no. 93295, max. temperature range 140 °C, 2,060 Watt, 12
stations
215 1 laboratory dyeing apparatus, make: Salvis, type: Nuance, serial no. 45116, max. temperature range 140 °C, 2,060 Watt, 12
stations
216 1 vacuum pump, make: Yunk, with tripod
217 1 dyestuff flow rate analyzer, make: COMEUREG, type: Teintolab
218 1 laboratory yarn dyeing apparatus, make: Sati, (1995), w. soda dosing device, make: K-Tron. Soda, type: K-MVK20, (1995),
control system, make: EAS
219 3 laboratory yarn dyeing apparatuses, make: Sati, capacity: 1 x max. 5 yarn bobbins, 2 x 1 yarn bobbin, control system, make:
EAS, all 3 dyeing units are sharing one switchgear, but separate control systems
220 1 laboratory yarn dyeing apparatus, make: Noseda, type: Tieffe-L-S
221 1 matching cabin, make: VeryVide, type: CAC150, hour meter reading 57875
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Matching room
222 1 tumble dryer, make: Elektrolux
223 1 laboratory fridge, make: Ralpe, capacity approx. 140 l, household fridge, make: Balay, capacity approx. 140 l
224 1 laboratory padding machine, make: Tepa, roller width 500 mm
225 1 warming cabinet
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
226 1 yarn spooling frame
227 1 yarn spooling frame
228 1 yarn reel
229 1 circular knitting machine
230 1 room equipment, consisting of: 38 suspended file cabinets, 3 - 4 drawers, batch wall shelves, 1 batch cabinets, and more
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Assembly/packaging
231 1 foil packaging machine (SULD 1), make: GP, (1992), max. web width 1,000 mm
232 1 laboratory scale
233 1 lead weight sewing machine, make: Remoldi, type: Vega II, working platform, max. working width 4,000 mm
234 1 pneumat. portable sewing machine, make: Siruba, type: AA-3, serial no. 1309045
235 1 industrial sewing machine, make: Merrow, type: TO-Y3, serial no. 208137
236 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 234106, submounted table
237 1 industrial sewing machine, type: 70- D3B, serial no. 183218
238 1 industrial sewing machine, make: Merrow, type: 70- Y3B, subframe
239 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 234349, submounted table
240 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 196367, submounted table
241 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 222910
242 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 238254, submounted table
243 1 industrial sewing machine, make: Merrow, type: 70- Y3B, serial no. 205151, submounted table
244 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 191528
245 1 post bed sewing machine, make: SIRUBA, type: AA-6
246 1 industrial sewing machine, submounted table
247 1 industrial sewing machine, make: Merrow, type: 70- D3B, serial no. 195107
248 1 portable sack sewing machine, make: SIRUBA, type: AA- 6
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Sewing shop
249 1 industrial sewing machine, make: Union Special, type: 53400 AK
250 1 industrial sewing machine, make: Treasure, type: BS- 101
251 1 automatic industrial sewing machine, make: Brother, type: LZ2- B853-3, serial no. F6605645
252 1 industrial sewing machine, make: Dürkopp, type: 11- 10103
254 1 industrial sewing machine, make: Cornely
255 1 industrial sewing machine, make: Omnitex
257 1 industrial sewing machine, make: Brother, type: MA4- B551-063-5, serial no. E0549262
258 1 industrial sewing machine, make: Remoldi, type: Vega, serial no. F27-98-10D-01, feeding table
259 1 industrial sewing machine, make: Union Special, type: 53400K, special sewing table, working platform
260 1 industrial sewing machine, make: Remoldi, type: Vega, special sewing table, working platform
261 1 drinking water dispenser, make: Canaletas, type: T- 6PLV, filter system
262 1 ironing unit, make: Reverberi, (1991), consisting of: ironing table, heated, length approx. 1,200 mm, steam generator, type:
GL5, smoothing iron, storage table
263 1 laying table, wood/metal, 2,000 x 3,500 mm
264 1 laying table, wood/metal, 2,000 x 3,600 mm
265 1 unwinding machine, roll width 3,000 mm, mobile substructure
266 1 room content, consisting of: 7 linear m. storage shelf, metal, different designs, cabinet, wood, 2 doors, content: yarns,
suspension file cabinet, 2 cabinets w. safe compartments, metal, 4 doors
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Raw material storage
267 1 electr. bale truck, make: Jungheinrich, max. lifting capacity approx. 1,000 kg, hour meter reading 07850, battery charging unit
268 1 reactive current compensation unit, make: Circutor, type: 8df-144
269 1 scissor-type lifting platform, platform size 2,000 x 4,000 mm, lifting height 1,050 mm, access ramp, hydraulic unit, barrier
control, safety equipment
270 1 storage shelf system, consisting of: 460 linear m. pallet shelf, steel , painted, post height mostly 4,500 mm, clear width 2,000
mm, compartment depth 700 mm, 2 different weight classes, wooden shelf levels boards, constructed as combined shelf unit with 3,300 mm compartment depth, 1 batch collision protection elements, shelf parts dismantled
271 1 shelf serving ladder, 14 steps, mobile
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
272 1 forklift reach truck (15), make: Daewoo, type: B14RJB, (2003), serial no. C7-00074, max. lifting capacity 1,400 kg, post type
FFT4500, max. lifting height 4,500 mm, hour meter reading 11381, battery charging unit
273 1 forklift reach truck, make: 4/ON, max. lifting capacity approx. 1,000 kg, max. lifting height 5,750 mm, hour meter reading
01987, spike, battery charging unit
08530 la Garriga - Barcelona, Carretera de Ribes km 3,5 / Chemical dosing
274 1 central mixing and dosing station (chemicals), make: Laver, type: DOSCHEM/40/27, serial no. 1195, 14 storage tanks,
stainless steel, each with 2 chambers, capacity 1,000 l per unit, 1 storage tanks, stainless steel, 1 chamber, capacity 1,000 l, piping, control PC, monitor, system software, operativeness not known
275 1 central mixing and dosing station (chemicals), make: EAS, consisting of: 13 storage tanks, plastic/, capacity approx. 1.200 l
per unit, in transport pallet, dosing pumps, main feed pump, flow meter, control system, make: EAS, control PC, system software
276 1 GFRP storage tank, capacity approx. 800 l, sealing cover, drain on side
277 1 plastic storage tank, capacity approx. 950 l
278 1 double diaphragm pump, make: VM
279 1 displacement system pump, make: Vogt Extrusion Pump, type: S
280 1 mobile aluminium scaffold, make: Zerges, consisting of: 2 self level boards, 4 frames, 1 batch diagonal elements, wheel set
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Spare part storage - Heating room
281 1 room content, consisting of: 6 linear m. storage shelf, contents: pumps, fittings, valves, locker, metal, 4 doors, and more
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Workshop - Thermal heating room
282 1 workshop equipment, consisting of: long belt grinding machine, welding table, workbench cabinet, tool boards, lever knifes,
hand-held tools
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Heating room - Thermo oil
283 1 thermo oil heating boiler, make: Konus, type: 100/2, (1971), serial no. 1619, max. temperature 320°C, stack, steel, heating
control not operative
284 1 workshop crane, make: Alvarez
285 1 thermo oil heating plant, make: Noxman, type: CL2200, serial no. 10600, max. temperature range 350 °C, power 2.2 mio.
kW/h, exhaust gas stack, burner, make: Weishaupt, type: G10/1-D Serie progresiva, heating medium: natural gas, power 3,950 Watt, control system, make: Noxman
286 1 workshop crane, make: Hermed, max. lifting capacity 3,000 kg
287 1 foil welding device, make: Rovebloc, type: S8D, (1977), power 800 Watt
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Steam generator room 1
288 1 steam generator, make: Calor y Caldereria S.A., type: Normaltec- Q, max. steam output 10,000 kg/h, max. pressure 8 kg/cm²,
burner, make: Weishaupt, type: G70/2-A Serie Progresiva, (1992), burner no. 3760852, power 10,900 kW, medium: natural gas, exhaust gas stack, 2 circulation pumps, piping
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Steam generator room 2
289 1 HP steam generator, make: LOOS, type: ECO1, (2009), max. admiss. pressure (PS) 31 bar g, test pressure 56 bar g, max.
admiss. temperature (TS) 238 °C, thermal output (QN) 441 kW, total volume (V) 142 l, man. no. 1049485, man. identification LI LD, burner, make: Weishaupt, type: G70/2-A Destino, (2009), serial no. 5898055, power min. 1,000 KW, max. 10,500 kW, pressure min. 100 mbar, max. 4,000 mbar, medium: natural gas, insulated exhaust gas stack, pressure compensation tank, make: LOOS, economizer, water conditioning unit, make: BAM SPT, (1997), control system, make: Siemens, type: S7
290 1 aluminium leaning ladder, make: Zerges, 3 parts, 33 steps
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Spare part storage - Steam generation
291 1 spare part storage equipment, consisting of: 11 linear m. storage shelf, content: machine spare and accessory parts for
stenter frames, Famatex and Babcock, and other equipment
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Yarn assembly room
292 1 air humification system, make: Air Mecon, medium: water steam
293 1 manual hydraulic press, make: Larzep, self-constructed
294 1 pallet truck, max. lifting capacity 2,000 kg
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
295 1 electr. hand-guided lift truck, make: FAC, type: K9/SBM/P/30, (1999), serial no. 30330, max. lifting capacity 3,000 kg, battery
charging unit
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Compressor room
296 1 central pressurized air system, make: CompAir, consisting of: screw compressor, type: L90-09A, (2002), serial no.
349021/0332, total weight 2,380 kg, integrated compressor unit, type: 2723, volumetric flow 14.5 m³/min, intake pressure 1.0 bar, stage pressure 9 bar, max. speed 3,000 rpm, control system, type: Delcos 3000, pressurized air refrigeration dryer, make: MTA, oil/water separator, make: Beko, type: 6, compressor control unit, make: Sogimair
297 1 screw compressor, make: Compair/Demag, type: Regatta 140 A, (1998), serial no. 3480067647, total weight 2,235 kg,
integrated compressor unit, type: 1013, volumetric flow 13.8 m³/min, final pressure 7.5 bar, max. speed range 3,000 rpm, compressed air tank, make: Sogimair, type: R.1.5/10, max. pressure 10 bar, (1998)
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Yarn storage - Weaver's shop
298 1 dyestuff conditioning unit (autoclave), make: Ets Lagarde, type: L, serial no. 98, indirect steam heating
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Water conditioning
299 1 process water de-carbonization plant, make: Enfecsa, consisting of: 2 reaction tanks, capacity approx. 2,500 l per unit,
radial pump, make: KW, type: N2-50/160B, dosing control, make: Heyl, type: Testomat ECO, with online connection, degasser
300 1 process water de-carbonization plant, make: Moiman, (1987), consisting of: 2 water filter depot, capacity 3.06 m³ per unit,
circulation pumpe,1 x GFRP storage tank, make: Tremosa
301 1 double diaphragm pump, make: VM , mobile substructure
302 1 compressed-air dryer, make: MTA
303 2 aluminium folding ladder, 1 x 7 steps, 1 x 2 parts, 18 steps
304 2 circulation pumps, 1x make: KBA, type: M2-32/160H, 1 x make: Sera Seybert Rahir, type: R411.1
305 1 combined heat/power generation plant, make: Sulzer Infra, (1993), consisting of: gas compressor (CR1), make: MAN GHH,
type: CU128, power 1,560 Nm³/h, degasser (D1), rated capacity 10 t/h, economizer (E-1), make: GRGEA, capacity 4.5/8.9 t/h, thermo oil generator (H-1), make: GEA, type: KLS- 682, capacity 133,850 kg/h, steam generator (H-2), make: GEA Deltak, type: 3L6-287, capacity 4,500/8,900 kg/h, max. final pressure 8 bar, turbine air filter (F-1), electr. pump, make: Ebara Emica, type: WKL-40, capacity 12 m³/h, condensate pump (P-2-A/B), make: Ebara Emica, type: ENDRM40/200, capacity 12 m³/h, electr. pump (P-3/A/B) for thermo oil, make: Mecanica Prim, type: FN-830 R2N, capacity 185 m³/h, electr. gear pump (P-4), make: Elia, type: R3R-35, capacity 3.5 m³/h, air noise silencer (S-1) for turbine feed air, air noise silencer (S-2) for turbine circulation air, air noise silencer (S-3) for turbine exhaust air, air noise silencer (s-4) for bypass turbine exhaust gas, cooling water tank (T-1), capacity 8,000 l, steam expansion tank (T-2), capacity 10,000 l, turbo set for natural gas (TR-1), make: Solar Taurus, rated electr. power 4,220 KW, valve for gas bypass (V-1), make: Stejasa, control room, medium voltage transformer, make: ABB, type: 630/36/25 B2SI-PA, (1992), serial no. 259,968, power 630 kVA, medium voltage transformer, make: ABB, (1992), serial no. 259.967, power 6.300 KVA, hour meter reading/gas compressor 51531, gas turbine missing
306 2 transport tanks, stainless steel, capacity approx. 800 l, mobile
307 aluminium pipes, approx. 200 units, Ø approx. 80 mm, length 3,000 mm per pipe, stored in 4 trolleys
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / QA laboratory
308 1 peeling tester, make: SDL
309 1 steam sterilizer, make: H&P , type: Varioclav 400E, max. admiss. pressure 4.5/-1 bar, max. temperature 150 °C, capacity 80 l
310 1 colour light stability testing device, make: Hereos, type: Xenotest 150S, hour meter reading 54653
311 1 sample washing machine, make: Roaches, type: Washtec
312 1 hydrostatic testing device, make: SDL
313 1 heating oven, make: Hereos, type: UT5050E, serial no. 8702241, rated temperature 250°C
314 1 matching cabin, self-constructed
316 1 laboratory testing device, make: SDL, type: C1195
317 1 laboratory AC system, make: Daikin Bonambient, type: SRYP190AYE
318 1 room equipment - QA room, consisting of: laboratory furniture, submounted cabinet row, suspended file cabinets, metal, each
with 4 drawers, storage table, shelves and other equipment
319 1 room equipment - QA office, consisting of: 2 angular desk combinations, 2 file cabinet combinations, 4 file shelves, Resopal,
approx. 1,000 x 2,000 mm each , shelf, length 3,000 mm, metal
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Electrician's workshop
320 3 folding ladders, 2 x aluminium, 8 resp. 14 steps, 1 x wood, 6 steps
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
321 1 room equipment - electrician's workshop, consisting of: 11 linear m. storage shelf, content: materials for electric
installations, spare parts for electric installations, power and control cables, electric motors, 2 tool cabinets, metal, 2 doors, content: 2 tool trolleys, double grinding stand, make: Letag, and many other items
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Open air ground
322 25 rolls of fabric (A frames), length 2,000 mm
323 25 rolls of fabric (A frames), length 2,000 mm
324 25 rolls of fabric (A frames), length 2,000 mm
325 25 rolls of fabric (A frames), length 2,000 mm
326 25 rolls of fabric (A frames), length 2,000 mm
327 25 rolls of fabric (A frames), length 3,400 mm
328 25 rolls of fabric (A frames), length 3,400 mm
329 25 rolls of fabric (A frames), length 3,400 mm
330 25 rolls of fabric (A frames), length 3,400 mm
331 25 rolls of fabric (A frames), length 3,400 mm
332 1 Diesel forklift truck, make: Tailift, type: FD25, (1999), serial no. 3073355, dead weight 3,800 kg, max. lifting capacity 2,500
kg, max. lifting height approx. 4,500 mm, hour meter reading 06331
333 1 brushing machine, make: Bianco, max. web width 3,400 mm, dismantled
334 1 storage tank, make: claflued, type: 12H2O2, (1999), serial no. 215, stainless steel, capacity 12,000 l, single-wall design, level
indicator, centrifugal pump
335 1 soda storage tank, make: Calfluid, type: 35SCSA, (1999), serial no. 214, steel/black, insulated, capacity 35,500 l, circulation
pump, mechan. level indicator
336 1 vacuum fan
337 3 double diaphragm pumps
339 1 stainless steel water tank, make: Calfluid, capacity approx. 500 l, electr. level indicator
340 1 stainless steel storage tank, make: Argelich Termes, type: SRP 500, (1976), serial no. 2402, capacity 9,000 l, elevated, drain
on lower side, centrifugal pump, stirring unit, heating, indirect steam heating
341 1 stainless steel storage tank, make: Pompatravani, level indicator, centrifugal pump, capacity 10,000 l, insulated, elevated
342 3 centrifugal pumps, make: ZEDARS, type: D-70, pump control system
343 3 circulation pumps, make: INBEAT, type: M1-IK, pump control system, stainless steel piping, pipe Ø of pressure line 200 mm,
length approx. 40,000 mm
344 1 water depot, stainless steel, capacity 80,000 l, insulated, height 11,000 mm, electr. level indicator, single-wall design, internal
heating coil, indirect steam heating, Ø 3,000 mm, piping, stainless steel, different designs approx. 200,000 mm
345 1 crane unit, make: Vicinay, electric winch, max. lifting capacity 1,000 kg, crane rail, steel, length approx. 30,000 mm, support
frame, spreader
346 1 stainless steel storage tank, capacity approx. 9,000 l, electr. stirrer, internal heating coil, heating medium: steam
347 1 stainless steel drop-in tank, capacity 250 l, electr. stirrer, heating medium: steam, circulation pump
348 1 storage tank , stainless steel, capacity 11,400 l, circulation pump, mechan. level indicator
349 1 chamber filter press, make: Tefsa, type: EHR- 1300/16, serial no. 772PT-19250, 30 filter chambers, each 1,300 x 1,300 mm,
control system, pump for solid matter, make: Mouvux, type: AX40 NR, (2000), piping
350 1 polyelectrolyte dissolution unit, make: Sodiscientifica, type: Automix Max 40/C 2000, (2000), serial no. 52710
351 4 waste water sedimentation tanks, stainless steel, capacity approx. 8 m³ per unit, elevated, each unit w. stirrer, piping
353 2 dosing pumps
354 2 dosing pumps
355 1 displacement system pump, make: CMX, type: KN- 60M, serial no. 945296, connected load 5.5 kW
356 1 radial pump, make: Robusch, type: RN150-500 TM, serial no. 2-03843, electric motor, connected load 122 kW
357 1 water filter, make: ODOBEZ, stainless steel
358 1 radial pump, make: Robusch, type: RN 150-500 TM, serial no. 01-00869, capacity 330 m³/h, connected load/motor 110 kW,
piping, pump control system
359 1 pillar jib crane, make: Vicinay, max. lifting capacity, 0.5 t, jib 3,000 mm, pillar height approx. 2,500 mm
360 1 radial pump, make: Robusch, type: RON-125-32-TM, connected load/electric motor 15.0 kW, pump control system
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
361 1 radial pump, make: Robusch, type: RON-125-32-TM, connected load/electric motor 15.0 kW, pump control system, frequency
converter
362 1 radial pump, make: Itur, type: NL-125/250B, serial no. 6010590, capacity 200 m³/h, pump lift 20,000 mm, connected
load/electric motor 18.5 kW, pump control system
363 1 radial pump, make: Itur, type: NL-125/250B, capacity 200 m³/h, pump lift 20,000 mm, connected load/electric motor 18.5 kW,
pump control system
364 1 pressure pump
365 1 circulation pump
366 1 scissor-type lifting platform, make: Skyjag, type: 4626, (1992), serial no. 70326, max. load capacity 850 lbs, max. lifting
height 26 ft., w. electr. drive
367 1 pallet winder, make: Colibri, (2002), serial no. 920242
368 20 yarn transport pallets, steel
369 1 electr. hacksaw, make: Sabi, type: 14, feeder roller conveyor
370 1 double pillar hydraulic press, manual hydraulic unit
371 1 double-sided cantilever shelf, content: profile material
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Open air ground / Behind water treatment
372 1 waste water filter, make: E.V.I. Plant, (2002)
373 1 GFRP storage tank, make: PV, (2008), tank no. 109, capacity 40,000 l, manhole, pneum. valve, double diaphragm pump
374 1 GFRP storage tank
375 1 pallet shelf, steel, zinc-coated, post height approx. 3,000 mm, length approx. 5,000 mm, corrugated sheet roof
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Open air ground / Medical examination
376 1 stretcher, leather/chrome
377 1 office equipment
378 1 office equipment
379 1 eyesight testing device
380 1 audiometry device, make: AMPLAD, type: 150, consisting of audiometer, type: amplaid 151, sound protection booth, batch
accessory parts
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Open air ground / Storage area
381 1 storage tank, (2008), steel, capacity approx. 30,000l, horizontal design, expansion tank, circulation pump, make: Seven Seas,
type: 80-160, (2008), discharge 100 m³, connected load 18.5 kW, circulation pump, make: Seven Seas, type: BOP 160/150, (2006), discharge 35 m³, connected load 7.5 kW
382 3 water treatment plant, make: deisa, consisting of: sand filter with storage tank, biolog. treatment basin, 3 reaction and storage
tanks, piping, pneumatic-controlled valves, circulation pumps, control system
383 1 assembly machine, make: JENSEN, type: cutting & rolling, (2001), serial no. 44-2012, max. fabric width 3,200 mm, 1 batch
transport equipment, packaging material, labels
384 1 electric hand-guided lift truck, make: FAC, type: B/1610, (2003), serial no. 03F42604, max. lifting capacity 1,000 kg
385 1 electric hand-guided lift truck, make: FAC, type: B/1610, (2004), serial no. 04F00526, max. lifting capacity 1,000 kg
386 1 assembly and packaging unit, make: TECNOTERM, type: LT, serial no. 050256
387 1 electric hand-guided lift truck, make: CARELLI
388 1 hand-guided lift truck, make: POLYTRACTOR
389 1 electr. forklift truck, make: Clark, type: OTM 12 S, (1995), serial no. GEF7096, rated lifting capacity 1,250 kg, max. lifting
height 3,300 mm, hour meter reading 6190
390 1 assembly machine, make: JENSEN, type: cutting & rolling, (2000), serial no. 44-2004, max. fabric width 3,200 mm, control
system defective
391 1 electric hand-guided lift truck, make: FAC, type: SBM/VT, (2006), serial no. 06F03029, rated lifting capacity 1,400 kg, max.
lifting height 1,600 mm, equipped with bale spike
392 1 forklift truck with weighing unit, make: DINAKSA, type: 2002 , max. weighing range 2,000 kg
08530 la Garriga - Barcelona, Carretera de Ribes, km 3,5 / Canteen
393 1 refrigerated salad bar, stainless steel
394 1 self-service bar, stainless steel w. heated food bath
NetBid S.L.u Auction Coordination: tel. 00 (49) 40 355059 -190 / fax -169 Local inspection coordination: tel. 00 (34) 661 411 469
395 2 linear m. table, stainless steel, length approx. 2,000 mm, 2 levels
396 1 Bain Mary, 2 food containers, on mobile structure
397 1 cooling table, stainless steel
398 1 bar counter, make: INFRICLO, stainless steel, length approx. 3,000 mm, substructure, 3 cooling compartments, cooling unit
399 1 coffee bar, make: INFRICLO, stainless steel, 2 drawers, integrated shelf
400 1 espresso machine, make: IBERITAL, 3 brewing units, filter holder machine, coffee grinders, make: Ascaso, coffee powder
dispenser
401 1 hood-type dish washer, make: Fagor, type: FI-80, stainless steel pre-washing sink
402 2 linear m. stainless steel table, length approx. 2,000 mm, 3 levels
403 1 cold storage cell, base area approx. 15 m³
404 1 refrigerator, make: CELAYA, stainless steel, 6 doors
405 1 table, stainless steel, length approx. 2,000 mm
406 1 food preparation table, stainless steel, substructure, 3 cooling compartments, cooling unit
407 1 salamander, make: GAYC, type: G.N.1
408 1 electr. roasting tray, make: foc, submounted kneading trough
409 1 professional gas stove, make: Fagor, 4 flames, kneading trough
410 1 double deep fryer, make: ELFRAMO, w. electric heating
411 1 extractor hood, stainless steel, autom. extinguishing system
412 1 food preparation table, stainless steel/steel, length approx. 1,400 mm