24
2
GAE
provides sales, engineering, installation and support services to
major utility, industrial and commercial customers throughout Indonesia.
We help you to optimize and protect existing assets while improving substation electrical system performance, reliability and safety.
• Complete engineering, manufacturing, installation & commissioning services • Substation automation controllers and equipment reduce maintenance cost • Energy management systems reduce outages through managing reliability and performance of power equipment
• Digital relays for generation, transmission and distribution, protect and monitor power equipment to ensure peak performance and
reduced down time
• Remote site monitoring and control to streamline operations and reduce substation trips • Power quality metering to protect downstream devices from surges and disruptions
We invite you to exploreour offerings…
Our solutions areyour success…
Integrated Solutions • Complete Substation Automation System • Protection and Control Relays, Meters and Switches • Network Communication for Industrial & Mission Critical Applications • Transformer Portable and On-Line Monitoring • RTU, SCADA & Energy Management System • Portable Test Instrument for Maintenance of Electric Power Equipment • Medium & Low Voltage Intelligent Switchgear & Smart Motor Control Center
Delivering innovativeand integrated Utility,Industrial and SubstationSolutions…
PT Guna Elektro (GAE) is an Authorized Distributor and Value AddedReseller based in Jakarta,Indonesia, and has been in the electrical,mechanical and telecommunication field for more than 50 years.
New concept...
3
Advanced Protection and Controlis the brain of Smart Grid
We offer a wide range of innovative solutions for Utility, Industrial and Substation customers.
• Generator Protection • Transmission Protection • Distribution Protection • IEC 61850 Process Bus • Energy Management & Metering • Recloser Control • Load Management • Microgrid Control • Synchrophasors
Protection & Control Communications
• Advanced Metering Infrastructure • Distributed Generation Trip Control • Wireless Data Acquisition • Wireless LAN Extension • Wireless Backhaul • Fiber Optic Pilot Schemes • Load Management • Wide Area Communications
Power Quality Power Sensing • Paralleling Switchgear • Fuseless Capacitor • Series Compensation Capacitor
• Current Transformers • Voltage Transformers • Power Transformers • Control & Test Switches
IEC 61850 Substation AutomationSystem Architecture
Gateway HMI (Human Machine Interface)
IEDs URPlus and UR Family simplified power management for the protection of critical assets. 650 Family Advanced Protection System and Bay Controller. Hydran M2 compact affordable all-in-oneon-line transformer-monitoring device.
Transfix 8-gas on-line transformer DGA monitoring unit MO 150 dynamic, intelligent transformer monitoring system
Bay Controller IED that provide a wide range of control and automation
.
RTU (Remote Terminal Unit) Microprocessor-controlled electronic device that interfaces objects in the physical world to a distributed control system or SCADA .
Engineering Station
EnerVista LAUNCHPAD Device setup and document management toolset.
Viewpoint Engineer Logic, IEC 61850 system configuration and real- time monitoring
Viewpoint Maintenance Security auditing, device health reporting, andfault data retrieval
Viewpoint Monitoring Easy -to-use monitoring and data recording
Integrator OPC Connectivity to automation and historian applications
Ethernet Switch Ethernet Communications for Industrial Automation, Power Utility, and Traffic Control markets
4
A secure, substation-hardened gatewaythat collects metering, status, event, and fault report data from serial or LAN based Intelligent substation devices.
HMI Software enables operators tomanage Substation and Industrial process control via a computer-based graphicaluser interface
Across allUR family…
Universal Relay Family
5
Protecting utility and industrial electrical assets while increasing uptime and reducinglife cycle costs
Convergence of multiple devices … Reducing external devices, wiring, and commissioning costs
With other products With GE Multilin UR
Multiple devices/multiple tools/multiple vendors
Communication Processor
Remote Thermal Unit
Protection Relay
Meters
Programmable Logic Controller
Auxiliary Devices
Bright LED Annunciator
Easily
Labeled LED’s
Large Bright Display
Secure Door Locking
16 User-Programmable Pushbuttons
3 User-Push buttons
RS232 Communications
Port
19’’ Chassis (4RU high)
Modular Construction … Flexibility and Easily Upgradeable
• Power Supply • Central Processor (CPU) & Comms • CT/VT Inputs • Digital Inputs/Outputs • Transducer Inputs (DCmA, RTD) • Inter Relay Communications
Modules
• Common hardware• Plug and play modules• Reduced stock of spare parts• Reduced maintenance cost
• Metering • Protection • Control
• Automation • Communications • Fault Recording
• Annunciator
• Synchrophasor
Built in
IEC 61850
UR FlexLogic … Customized Control and Operation
Across allUR family…
EnerVista . . . Easy to use, Single Location for all GE Multilin resources
Settings configuration • Communicate with multiple URs at the same time• Configure settings both on-line and off-line• Copy and paste settings • Quick connect communications
• Common look and feel for all products setup programs
Metering • Live actual and Synchrophasor measurements viewer for multiple URs • Status of all inputs and outputs
• Real-time monitoring of Phasor diagrams
Troubleshooting • Analyzing of event records (Search and sorts) • Powerful Synchrophasor and Oscillography COMTRADE viewer • Real-time data logging
• Compare relay settings with setting file
Applications . . . Covering all Protection and Control
• Generator Management (G30, G60) • Line Distance (D30, D60) • Line Current Differential (L30, L90) • Bus Differential System (B30, B90) • Transformer Management (T35, T60) • Breaker Management (C60)
• Feeder Management (F60)
• Multiple Feeder Management (F35)
• Motor Management (M60)
• Controller (C30)
• Capacitor Bank Protection & Control (C70)
• Network Stability & SynchrophasorMeasurement (N60)
6
• Drag-and-Drop logic configuration• Boolean logic operations• Executed every 2ms.• Connect logic equations directly to Outputs and LED’s
• Real-time status of internal logic and operands• Easy troubleshooting of wiring and logic problems
7
Bricks (HardFiber/Merging Unit)
Relay
CPU
Patch Panel
HardFiber IEC 61850 Process Bus Solution The Multilin HardFiber™ System can save Utilities up to 50% in total P&C installation and maintenance costs by replacing thousands of copper wires with IEC 61850digital communications over a few fiber optic cables.
Merging units…
Save up To 50% of your Protection & Control Labor...
+ Labor
• Head Office Engineering and Drafting
• Construction & Installation
• Commissioning & Testing
• On-going Maintenance
Traditional Substation Materials
• Relays
• Copper Cabling
• Terminal Blocks
• Test Switches
• Misc. Materials
=
Traditional substation designs require large amounts of skilled labor to create engineering drawings, pull and terminate miles of copper cables, and test and troubleshoot thousands of connections.
Appears to UR CPU as up to 3 CT/VT Input modules
Includes 8 fiber ports for up to 8 HardFibers
Compatible with Redundant power supply
1 communications module
1 conventional contact I/O module
Supports 6 AC redundant current/voltage banks, each with 4 channels
(A, B, C, X) 8 RTD and 8 TDR (transducer) inputs
40 contact inputs 32 SSR outputs, 16 form C outputs, 8 latching outputs
16 shared inputs, 16 shared outputs
+ Labor
• Head Office Engineering and Drafting
• Construction & Installation
• Commissioning & Testing
• On-going Maintenance
HardFiber Substation Materials
• Relays
• Cabling
• Patch Panel = The HardFiber System replaces labor-intensive processes with quick installation, off-the-shelf equipment and made-to-order cables.
8
C90Plus – Automation Logic Controller
New generation of solutions…
URPlus Solutions
• Built -on proven UR platform and application experience • Exceeding customer needs and emerging trends• One solution for protection, control, monitoring & automation • Tested for environmental & safety standards of industry & utility
Ease of use & graphical visualization• Pre -programmed single line diagrams
- Breaker control• Single keystroke for viewing information• Pre -programmed display screens
- Metering display- Voltage & current phasors- DFR display- Transient, Disturbance recorder- Fault report, SOE view- Equipment manager display- Maintenance display- Diagnostics summary- I/O status
• Monitor substation/device events using multi -language
annunciator
• 12 to 48 alarms per page, max of 8 pages
Reduce Wiring, Commissioning & Capital Costs
Replace LEDs & Separate Annunciator in Panels
URPlus powered by built-in• Sub -cycle Protection• Colored HMI • Alarm Annunciator • Power Metering • Control • Automation • Communications • Equipment Manager• Distributed I/O
Multiple Devices/ vendors/Programs
Convergence & integration
One Vendor
D90Plus – Sub-Cycle Distance Protection
UR Plus
B95 Plus Bus Protection Systems
Reduce the time and cost of field wiring for Bus Protection The Multilin™ B95Plus Bus Protection System is the ideal solution for one of the biggest challenges for large bus protection: the time and cost involved in the design, installation and commissioning of the field wiring between measurements from the switchyard and the bus relay in the control room.
Applications • Reconfigurable multi-section bus bar
with up to 24 feeders
• Retrofit and greenfield installations for power generation, transmission and distribution systems
• Reconfigurable bus bars for single bus, breaker-and-a-half and double bus with and without bus couplers
• Air -insulated and GIS stations
• Reduce field wiring costs through the use of rugged bay units (HardFiber Bricks) located in the yard.
• No configuration of bay units necessary. Simple configuration of the bus replica.
• Bricks can interface with any compliant device.
• Supports up to 16 Bricks and 24 Bus Sources.
• Protect six three-phase differential zones with one central device
Key Benefits
Applications configuration…
Merging Unit Merging Unit
9
10
Optimized Dispatch of Distributed Energy Resources
Control System Architecture And Optimization Sequence…
U90Plus Microgrid Controller
Applications • Rural micro grid optimization
optimizing use of conventional generators and renewable energy sources
• Commercial & industrial systems reliability – sustain backup generators during grid out ages by shedding loads
• Utility services enhancement - Aggregated and controlled DERs help solve utility business challenges such as reliability, and transmission congestions
• Reduce field wiring costs through the use of rugged bay units (HardFiber Bricks) located in the yard.
• No configuration of bay units necessary. Simple configuration of the bus replica.
• Bricks can interface with any compliant device.
• Supports up to 16 Bricks and 24 Bus Sources.
• Protect six three -phase differential zones with one central device
Key Benefits
Step 1 – U90Plus gathers data from all DERs and loads through wireless communications
Step 2 – U90Plus determines optimal use of DER
Step 3 – U90Plus sends control commands to each DER through a wireless radio
The Microgrid Control System automates and optimizes the use of Distributed Energy. Resources (DER) such as conventional generators, renewable-based generators,energy storage devices, and dispatchable loads. Optimization of a microgrid balances dispatchable DERs with the availability of renewable sources to minimize energy costand thus emission cost.
11
The Multilin… Protection & Control Family Overview
UR & URPlus, SR, SR 3 Series, 650 Family
Generator Protection System G60, G30, 489, G650, W650, MIG II, MIW II
Conformal coating for protection in chemically harsh and high humidity environments is available upon request
Note:
Transformer Protection T60, 745, T35, 345
Transmission Line Protection L90, L30, L60, D90Plus, D60, D30
Bus Protection B95Plus, B90, B30, MIB, HID
Distribution Feeder Protection F60, F35, 750, 760, F650, 350, MIF II, 735, 737, FM2, URC
Motor Protection M60, 469, 369, 339, MM300, MM200, MM2, SPM
Specialized Protection and Control C90Plus, C70, C60, C30, N60, U90Plus, MIV II, MIN II, RRTD, DDFR, DGT
Metering EPM 9900, EPM 9800, EPM 9650, EPM9450, EPM7100, EPM6100, EPM 7000, EPM 6000, EPM 5500, EPM 2200, EPM 2000, PQM II
URPlus UR Family
MM 300 Metering MIF II
650 Family
DGCV - Voltage Regulator Controller
Distribution Automation
D400 - DA Substation Based FDIR / FLISR Solution
Field RTU
DGCS - Switch Controller
DGCR - Recloser Controller
DGCC - Capacitor Bank Controller
Feeder Recloser Protection Systems (URC)
12
Advanced visualization technologies enable the efficient recovery of distribution systemsutilizing fault isolation, sectionalization and power system restoration capacities within ourwide range of distribution assets, controllers, and high accuracy measurement devices.Our high speed wireless capability provides peer-to-peer communications, enabling distribution utilities to make intelligent decisions, enabling fast and efficient responses to service interruptions.
The D400-DA is a substation based Fault Detection, Isolation, and Restoration system, designed for improving the reliability of distribution utility networks.
Part of a platform of Distribution Automation Controllers is designed to monitor and provide automated control of capacitor banks in a distribution network and improves operational effectiveness through a reduction of system losses
Integrated component of a Volt/VAR system, enabling utilities to optimize grid and operational efficiency is designed to monitor and control voltage regulators, maintaining voltage levels.
Part of a platform of Distribution Automation Controllers, the Multilin DGCM Field RTU provides advanced monitoring of low and medium voltage distribution feeders and is suitable for both pole top and pad mounted switch devices or transformer feeders.
Designed to provide distribution feeder protection, control, monitoring and metering in one integrated package incorporating the high end features of the F35, F650 or F60 feeder management relays.
Integrated fault detection, control, Auto-Sectionalizing functionality, and greatly improve distribution reliability
Integrated protection, control, reclosing functionality and greatly improve distribution reliability
iFIX with iPower Utility SCADA and Substation HMI
Smart Substation And Master Control...
Simplify your work process with…
EnerVistaTM EnerVistaTM is a leading software tool designed to simplify every aspect of working with GE Multilin devices and IEC 61850 ready
Device Setup & Document
Management Toolset Tool for Creating Control Logic, Simulation Testing, and Commissioning
Troubleshooting and Reporting Tools
Easy to Use Monitoring and Data Recording for Small Systems
Communications Server • OPC/DDE Server • Send device data to HMI, DCS, and SCADA systems
13
Developed for electric utilities, including rural cooperatives, municipal authorities and independent distribution utilities, iFIX with iPower is a proven SCADA solution that’s improving utilities operations globally.
14
Media Converter Switches & Hubs TB14H FT14H
CS14
Dymec Link Converter
Mobile Ethernet Switches
6KM
Power over Ethernet (PoE)
PES42P
ETSI and NEBS L3 EN50155
IEC 61850
NEMA TS-2 & TEES
Smarter
with… Industrial Network Communication
6K25e
6KQ
4K16
CP80 P62
Managed & Unmanaged Ethernet Switches
ESD42
Standards…
Compact Industrial Switches (Managed)
Compact Industrial Switches (Managed)
Modular Industrial Switches
Entry Level Hubs and Switches (Unmanaged)
Industrial Ethernet
OZD Profi G12 ATEX 1 is a Profibus FO repeater certified for use in hazardous locations
Compact Industrial Switches (Managed)
Managed RSP Switches
Power Over Ethernet
Precision Time Protocol (PTPv2)
Waterproof IP67/IP65 Industrial Switches
Industrial Wireless LAN
Fiber Interfaces Fieldbuses V.24 Digital modules
Composite Video Transmitters/ Receivers
OptoQuick devices and Hybrid components
Backbone Switches Serial to Ethernet converters
Instrument Transformers & Switches Sensors …
Current Transformers • LV Indoor/Outdoor Application up to 600 / 720V • 600 Volt Bushing Type (BCT) • MV Indoor / Outdoor 5 - 69kV (ANSI & IEC)
Voltage Transformers • LV 600 / 720 Volt • MV Indoor / Outdoor 5 – 69kV (ANSI & IEC)
Control Power Transformers • Single & Three Phase 5 – 34.5 kV
Switches • Control Switches • Test Switches • ANSI/IEC Test Block
Power Control Component
• Lockout Relays • Ground Fault Systems
• Voltage Relays • Capacitor Trip Devices
High Voltage Fuseless Capacitor Transformer
And Capacitor ...
Features • 150 – 3,600 kVAR • 2,4 – 34,5 kV • Oil or vacuum switches, motor or solenoid operated
Open Stack Rack • Lower Power Bills / Improved Power factor • Improved voltage support • Available as externally fused or fuseless • 2.4 – 765 kV • 1.2 – 600 MVAR
Pole Mounted
Series Compensation Capacitor • Fixed or Thyristor Controlled • Increase Long Distance Power Transfer, Dynamic Stability and Voltage Variation • 69 – 800 kV • up to 1,200 MVAR
15
Pole Mounted Capacitor products are pre-wired, factory assembled, and shipped ready for pole installation with single-phase capacitor units. Racks are made of welded structural aluminium and are suitable for mountingswitches and junction box and cable assembly.
Portable Test Instruments Maintenance … Testing … Commissioning …
FREJA 306/300 3/6 Current Relay Test
SVERKER 750/760 Single Phase Relay Test
Protective Relay TestSystem
GOOSER IEC 61850 Test System
SMRT1 Single Phase
Relay Test
SMRT36 Three Phase Relay Test
Primary InjectionTesting
CSU600A/600AT ODEN A/AT Max. 13000A
INGVAR Max. 5000A output
Breaker Test
B10ERipple Free
Power Supply
TM1800 MV to EHV Advance
Breaker Analyzer
EGIL Powerful economical MV Breaker Test Set
VIDAR Vacuum Bottle Tester
TM1700 New Technology of Breaker Analyzer
Micro-ohm Meter
MOM600A/200A MOM2 DLRO200/600 MJOLNER 600/200
FREJA 406 Six Current Relay Test
SDRM Applied with TM1800/1700 or EGIL
to provide Static Dynamic
Resistance Measurement
DualGroundProvide safety inBreaker Testing
16
Torkel 840/860 (Utility)
Torkel 820 (Telecom)
BGFT
Battery Ground Fault Tracer
BITE3 Battery Impedance Test
up to 2000 Ah
BITE2P
BITE2
Battery Test Unit
FRAX-101 & FRAX-150 SFRA Test for Power Transformer
Transformer Diagnostics
IDAX-300
Insulation Diagnostic Analyzer to assess moisture content in transformer,
bushing, generator and cables
MCT 1605 Multi -Tap Automatic Current
Transformer Saturation, Ratio and Polarity Test Set
TTR 300 3-Phase Transformer Turns Ratio Test Sets
TTR 100 Single - Phase Handheld TTR
IDAX-605 High-Precision Capacitance
and Dissipation Factor Measurement Instrument
BGL Battery Ground Fault Locator
OTS-AF Series 60 kV, 80 kV and 100 kV
Automatic Laboratory Oil Test Sets
17
Battery Impedance Test up to 7000 Ah
KF875 and KF-LAB MkII
Karl Fischer Moisture
in Oil Test Set
Multitrans 8 gas + moisture analyser •
• Monitors up to 3 separate single phase tanks
Transformer… Transformer On-line Monitoring
1. Hydrogen (H2), Carbon Monoxide (CO), Carbon Dioxide (CO2), Methane (CH4), Acetylene (C2H2), Ethane (C2H6), Ethylene (C2H4), Oxygen (O2), Nitrogen (N2)
Gas analyzer
Transformer ageing
Transformer faults
• 8 gas + moisture analyser • Complete Online DGA for Transformer
& Load Tap Changer • Monitors Main, Selector & Diverter tanks in one unit
• No oil cross-contamination
Taptrans
Transfix • 8 gas + moisture analyser and nitrogen
Minitrans • 3 gas + moisture • Same core technology as the successful
TRANSFIX • Oil sampling at regular interval,
increasing up to every hour when caution level reached
Transfix Plus • 8 gas + moisture analyser and nitrogen • Combines TRANSFIX and MO150 in
one enclosure • Ethernet switch for combined
communications
Diagnostic & Trending Software for Oil-filled HV Equipment. Perception Software …
Multiple Gas Transformer DGA…
Features & Benefits
• DGA & Water
• Cutting Edge Technology
• Minimal Maintenance
• Hourly Measurements
• Extensive communication/alarm options
• No membranes, No consumables, No carrier gas
• Full PERCEPTION
integration
Features & Benefits • Fully automated DGA data download • Alarm notification system • Simplified trending to advanced
diagnostics • Intuitive/configurable interface
18
GE’s Kelman DGA devices enable precise on-line monitoring of transformers using multiple fault gas1 DGA and offers detailed diagnostics accordingto IEEE/IEC standards of any incipient fault detected.
Transformer Data
Intelligent Processor • Data Acquisition • Transformer models
Vvvvv
v
Graphical User Interface, MO150 host
Intellix MO150 with Models Monitoring system …
• On-line key gases monitoring (Hydran M2)
• On-Transformer key parameters monitoring
• Control of cooling system available • On-line models and off-line models • Easy commissioning and set -up • Diagnostics & recommendations
• Various communication options • Analog/digital inputs and outputs
• Self diagnostics
• Sensor problem detection system
• Fail safe cooling control relays
• Universal switching power supply
Sensors …
• Dissolved gas H2
and CO
• Moisture content in oil and insulating
paper • Winding hot spot temperature
• Insulation aging • Tap changer position tracking
• Tap changer temperature • Cooling Status
• Cooling efficiency
Hydran M2 with Models
The method … Hydran M2 Low Level evolution
0
5
10
15
20
25
30
35
40
45
50
1-Dec 15-Dec 29-Dec 12-Jan 26-Jan 9-Feb 23-Feb
Date
HYDR
AN 20
1i Re
adin
g P
PM
Transformer fault
19
IntellixTM GLA 100Single Gas
Transformer DGA…
Small, intuitive and easy to install fault gas levelalarm that provides a low cost warning solution toextend DGA monitoring to the smaller lower endtransformers in your fleet.
Detection and Monitoring of Key Fault Gases in oilMonitoring level of moistureOn-line Dynamic Loading modelPrognostics & Diagnostics alarm
The Hydran M2 with models is an early warning device for detection of primaryfaults at transformers and other oil-filled equipment with its on-line fault gas andmoisture sensors.
Online … IntellixTM BMT 300
• PD activity correlation versus developing key fault gases in the main tank
enabling quicker detection of potential arcing faults which can lead to
catastrophic failures
•
One diagnostic software, GE PERCEPTION, for bushing information, PD
activity and DGA data analysis resulting in centralized system transparency
•
One -source provider lowers total cost of ownership by minimizing installation, equipment serviceability and administration burden
Bushing and Partial Discharge Monitoring System
Applications Example: HV Grid Substation
Portable DGA Transformer …
Represents an invaluable tool for Asset Management and will increase the power of any DGA program.
Transport X
Applications • All sizes of transformers tanks. • Ideal for site intervention teams. • Generation to Distribution transformers.
• OLTC and any oil filled equipment.
Features & Benefits • Portable 7 gas analyzer + Moisture • Accurate, reliable results in a rugged,
easy to use unit • Touch screen LCD & Printer • Reduces reliance on lab test • No Calibration • Results on-site in minutes • Built in analysis
20
21
Temperature and Gas Sensing Solutions
SF6 Leak Detection monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Accurate, reliable and stable quantitative gas detection solutions based on Photoacoustic Spectroscopy (PAS) technology for environmental protection and greenhouse gas reduction.
LumaSHIELD GaAs-Based Winding Hot Spot Temperature Sensor for Transmission and Distribution Transformers.
BoilerSpection™ is is a revolutionary thermal imaging system with the ability to see through flames that helps coal plants run more efficiently, extract more energy from their coal, and increase productivity.
LumaSense is the leading provider of temperature and gas sensing equipment to optimize performance of boilers, furnaces, refineries, substations, transformers, industrial sensing applications.
FurnaceSpection™ designed and developed for continuous temperature measurement inside high temperature furnaces in refining, metals and glass production, the FurnaceSpection imager provides users a critical tool for improving process and reducing waste.
LumaSMART Fluoroptic-Based Winding Hot Spot temperature Sensor for Generation, Transmission and Distribution Transformers.
LumaSpection™ Automated, Continuous Thermal and Visual Imaging to Identify Thermal Abnormalities within Electrical Substations and Other Process Control Systems.
Power Generation
Transmission &Distribution
PetrochemicalIndustry Steel Metal Plastic
Glass
Quasar Flare Stack Detection Systems are built for continuous duty monitoring of pilot flame (PM), flared gases (FM) and smoke particulate (SM) from flare stacks.
ThermalSpectionTM Critical Vessel Monitoring system from LumaSense is a turn key solution for monitoring critical vessels, such as gasifier skin temperature.
Sulfur Recovery Unit (SRU) is a Monitoring Infrared thermometry for sulfur reactors and other high temperature furnaces.
IMPAC Pyrometers are temperature measurement instruments that operate on the principle of infrared radiation, i.e. they detect infrared radiation of objects to determine the temperature.
Awakening your 6th
Sense…
Current Trends in the Condition Assessment of Electrical Equipment Analytical… Diagnostic Testing & Consulting Services
Breaker Oil Analysis
DGA, Moisture, IFT, Acid, Colour,Dielectric Breakdown Voltage,Particle Profile
Breaker SF6 Gas Analysis
Gas Decomposition/Contamination Products, Dielectric Breakdown, Moisture
Transformer Condition Assessment
DGA, Moisture, IFT, Acid, Colour, Dielectric Breakdown Voltage, Power Factor @25°C, Oxidation Inhibitor, Furan Analysis, Particle Profile
Tap Changer Activity Signature Analysis
DGA, Moisture, IFT, Acid, Colour,Dielectric Breakdown Voltage,Particle Profile
Diagnostic Standards Dissolved Gas Analysis (DGA) ASTM D-3612 Moisture Content ASTM 1533 Acid Number ASTM D-974 Interfacial Tension (IFT) ASTM D-971 Dielectric Breakdown Voltage IEC 60156 Colour ASTM D-1500 Power Factor (at 1 temperature) IEC 60247 Resistivity IEC 60247 Oxidation Inhibitor ASTM D-2668 Furan Analysis (with estimated DP) ASTM D-5837 Particle Count In-house PCBs in Oil ECD-507 Corrosive Sulphur IEC 62535 or ASTM
Service Package
Mini-Suite Package DGA, Moisture, IFT, Acid, Dielectric Breakdown Voltage, Colour and Visual
22
Collaborated with an independent analytical laboratory and consulting firm thatspecializes in diagnostic testing of oil, gas and other insulating materials used in transformers, power circuit breakers and load tap-changers. We provides testing, consulting and other analytical services for electric utilities, industrial high-voltage power users and service companies.
Protection & Control Relay Panel We do retrofitting…
Motor Control Center We offer package Solution…
The Power… Intelligent Switchgear & Motor Control Center
We offer both IEC and ANSI/NEMA product for Medium and Low Voltage Switchgear & Motor Control Center which can be packaged with GE intelligent protection & control system.
Switchgear
23
Our Program… In-Class Training Courses The skills learned through our courses will help maximize your organization’s potential by helping meld a skilled workforce with powerful products.
PWR IV/12
PT GUNA ELEKTRO Jl. Arjuna Utara 50 – Jakarta 11510, INDONESIA T 021 - 565 5020 www.GAE.co.id F 021 - 565 5030 [email protected] Power Div is ion
What Will I Learn From This Course?
Motor Protection Principles & Relaying…
This course addresses the training requirements of electrical maintenance staff responsible for MM300, 239, 269 Plus, 369, M60 and SR469 Motor Management Relays. Through a combination of lectures and practical Lab exercises, the class will learn how to correctly configure, monitor and troubleshoot these GE Multilin motor protection relays.
Transmission Line Protection Principles & Relaying…
This course begins with an overview of basic Transmission Line terminology, Distance theory, Distance schemes in addition to Differential Line protection. Through a combination of lectures and practical Lab exercises, the class will learn how to correctly configure the D60 and ALPS Distance relays the L90 Line Current Differential and L60 Line Phase Comparison.
Distribution Protection Principles & Relaying…
This course provides an understanding of GE Multilin Feeder and Transformer protective relay installation, operation and troubleshooting procedures. The course covers both the SR750/SR760 Feeder Management Relay and the SR745 Transformer Management Relay. Feeder and Transformer protection theory will be presented, followed by installation, configuration and Protection element testing using the relay’s built in simulation software. Practical Lab exercises reinforce material covered in the class lectures.
This course provides an understanding of the fundamentals of digital Power System relaying specifically tailored to Industrial facilities. The class will cover basic Power System theory, Feeder, Busbar, Transformer Motor and Generator protection principles. Device demonstrations will be performed by the instructor following selected protection sections.
Power System Protection For Industrial Facilities…
This course begins with an overview of basic Generator theory and the associated protection requirements. Through a combination of lectures and practical Lab exercises, the class will learn how to correctly install and configure GE Multilin’s Generator Protection Relays.
Generator Protection Principles & Relaying…
Power System Protection For Utilities…
This course provides a comprehensive understanding of the principles of digital Power System relaying, specifically tailored to Utilities. The class will cover the major components of a Power System, basic Power System theory, Feeder, Busbar, Transformer and Transmission Line protection principles.
