Date post: | 08-Apr-2016 |
Category: |
Documents |
Upload: | polaris-controls |
View: | 217 times |
Download: | 1 times |
2015 Catalog
High output, high impact, audiophile quality sound, featuring our proprietary coaxial line array speakers (Stix) and high impact subwoofers (Drums)
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
When The Best Sound Matters
Coaxial Line Arrays
Planar MagneticRibbon Drivers
Woofers
Night Clubs
Houses of Worship
Outdoor Venues
DJ's / Live Venues
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
The STX 6600 is a straight column Line Array featuring six high power 6.5” custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax con�guration with a uniquewaveguide for wide 110 degrees horizontal coverage.
Ultra-fast transient response and higher instantaneous peak lever for faithful signal reproduction and improved dynamic range.
The highly controlled vertical dispersion of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi �delity long throw system.
True line array performance provides dramatically increased intelligibility in highly reverberant spaces.
Single box construction with integrated �y points and internal passive crossover for lower cost installation.
Improved front to back SPL over the entire audience area, typically +/- 2db
STX 6600 Specifications
Sensitivity, 1m/2.83V
Power Handling
Recomended Amplifier Power @ 4ohms
Rated Impedance
Input Connectors
Enclosure
Mounting Options
101db
720W AES, 1100W IEC long term, 1400W IEC short term
500W-2000W (FTC) @ 4 ohms
6 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Closed box alignment, 18mm marine plywood, heavily damped and braced
(17) M10 fly points, (4) M8 points for wall mount option
System Type
Driver Components
Crossover
Maximum SPL
Coaxial, ribbon driver, line array, two-way, single sealed enclosure
(6) 6” ribbon drivers + (6) 6.5” paper/Kevlar composite mid-bass drivers
Passive, custom
70Hz - 20kHz @ -6db
128db continuous, 138db peak
SPECIFICATIONS
System Coverage 110 degree horizontal, 20 degrees vertical (asymmetrical)
10.550268
38
.00
966
FRONT VIEW
10.000255
1.69343
4.724120
1.6
9343
1.69343
4.724120
SIDE VIEW
2.7670
5.276134
5.
0012
7
1.6
9343
3.
94
100
BACK VIEW ISOMETRIC VIEW
1.69343
7.165
182
1.6
9343
4.7
2412
0
TOP VIEW
M10 (17 Plc's.)
Accessories (optional) Wall Mounting Kit(BKT-WM66) for multiple stacked arrays L Bracket Kit(BKT-L66) for flying arrays under DRM215 subwoofer(s) Coupling Brackets(BKT-CP66) Allen Products MM-060 / MM-120 for single box wall mounting
Dimensions, (H x W x D) inches (mm)Weight, net
Warranty
Height 38.03” (966 mm) Width 10.550” (268 mm) Depth 10.04” (255 mm)
60.0 lbs. (27kgs)
Limited 5-year warranty
Frequency Response¹
Input4ohms
LoopOutput
TM
SubwooferModel STX 6600
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
The STX 6620 is an articulated curved single box Line Array featuring six high power 6.5” custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax con�guration with a unique waveguide for wide 110 degree horizontal coverage.
Ultra-fast transient response and higher instantaneous peak level for faithful signal reproduction and improved dynamic range.The highly controlled vertical dispersion (asymmetrical 20 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi �delity system when more vertical coverage is required.
Couple with STX 6600 for long throws applications as well as STX 4625 for extending vertical coverage.
True line array performance provides dramatically increased intelligibility in highly reverberant spaces.
Single box construction with integrated �y points and internal passive crossover for lower cost installation Improved front to back SPL over the entire audience area, typically +/- 2db.
STX 6620 Specifications
TOP VIEW
M10 (17 Plc's.)1.693
43
7.165182
1.6
9343
4.7
2412
0
FRONT VIEW SIDE VIEW ISOMETRIC VIEW
10.550268
38
.03
966.
0
BACK VIEW
5.276134
1.6
9343
2.7670
5.00
127
3.
94
100
10.040[255]
1.693[43]
396.1]34[
4.724[120]
1.693
[43]4.724
[120]
1.69
3
[43]
Sensitivity, 1m/2.83V
Power Handling
Recomended Amplifier Power @ 4ohms
Rated Impedance
Input Connectors
Enclosure
Mounting Options
101db
720W AES, 1100W IEC long term, 1400W IEC short term
500W-2000W (FTC) @ 4 ohms
6 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Closed box alignment, 18 mm marine plywood, heavily damped and braced
(17) M10 fly points, (4) M8 points for wall mount option
System Type
Driver Components
Crossover
Maximum SPL
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
(6) 6” ribbon drivers + (6) 6.5” paper/Kevlar composite mid-bass drivers
Passive, custom
80Hz - 20kHz @ -6db
128db continuous, 138db peak
SPECIFICATIONS
System Coverage 110 degrees horizontal, 20 degrees vertical (asymmetrical)
Accessories (optional) Wall Mounting Kit(BKT-WM66) for multiple stacked arrays L Bracket Kit(BKT-L66) for flying arrays under DRM215 subwoofer(s) Coupling Brackets(BKT-CP66) Allen Products MM-060 / MM-120 for single box wall mounting
Dimensions, (H x W x D) inches (mm)Weight, net
Warranty
Height 38.03” (966 mm) Width 10.550” (268 mm) Depth 10.04” (255 mm)
60.0 lbs. (27kg)
Limited 5-year warranty
Frequency Response¹
Input4ohms
LoopOutput
TM
SubwooferModel STX 6620
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw Terminal Barrier Strip
INPUT PLATE
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
The STX 4625 is a symmetrically curved Line Array featuring four high power 6.5” custom designed neodymium woofers and four advanced design planar magnetic Ribbon drivers in a coax con�guration with a unique waveguide for wide 110 degrees horizontal coverage.
Ultra-fast transient response and higher instantaneous peak level for faithful signal reproduction and improved dynamic range.The highly controlled vertical dispersion (symmetrical 25 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi �delitysystem when more vertical coverage is required. Couple with STX 6620 for extending vertical coverage without the need for additional an ampli�er channel.
True line array performance provides dramatically increased intelligibility in highly reverberant spaces.
Single box construction with integrated �y points and internal passive crossover for lower cost installation. Improved front to back SPL over the entire audience area, typically +/- 2db
STX 4625 Specifications
FRONT VIEW SIDE VIEW BACK VIEW ISOMETRIC VIEW
1.69343
7.165
182
1.6
9343
4.7
2412
0
M10 (17 Plc's.)
TOP VIEW
1.6943
1.6943
3.8196.900
10.00255
4.72120
10.55268
4.72120
25
.50
647
07. 1
34
5.276134
1.
69 43
3.
00
76.2
Sensitivity, 1m/2.83V
Power Handling
Recomended Amplifier Power @ 4ohms
Rated Impedance
Input Connectors
Enclosure
Mounting Options
93db, 96db @ 1w/1m
480W AES, 720W IEC long term, 950W IEC short term
300W-1400W (FTC) @ 4 ohms
16 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Closed box alignment, 18mm marine plywood, heavily damped and braced
(17) M10 fly points. Coupling Brackets (BKTCP66) for use with STX6620 included
System Type
Driver Components
Crossover
Maximum SPL
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
(4) 6” ribbon drivers + (4) 6.5” paper/Kevlar composite mid-bass drivers
Passive, custom
80Hz - 20kHz @ -6db
123db continuous, 133db peak
SPECIFICATIONS
System Coverage 110 degree horizontal, 25 degrees vertical (asymmetrical)
Accessories (optional) L Bracket kit (BKT-L66) for mounting under or on DRM 215 subwoofer Dimensions, (H x W x D) inches (mm)
Weight, net
Warranty
Height 25.63” (651 mm) Width 10.55” (268 mm) Depth 10.04” (255 mm)
40 lbs. (18.0kg)
Limited 5-year warranty
Frequency Response¹
Input4ohms
LoopOutput
TM
SubwooferModel STX 4625
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
P
The STX 4625P is a portable multi use symmetrically curved Array featuring four high power 6.5” custom designed neodymium woofers and four advanced design planar magnetic Ribbon drivers in a coax con�guration with a unique waveguide for wide 110 degrees horizontal coverage.
The highly controlled vertical dispersion (symmetrical 25 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi �delity system, with minimum room interaction.
The STX4625P includes a 35mm adjustable (+/-) 18 degree top hat for pole mounting, pocket handles for easy transport and positioning and 16 M10 �y points for �ying or virtually any mounting position.
The STX 4625P and DRM115 companion subwoofer make the perfect portable system for playback or live sound in small to medium spaces.
The STX4625P when used in it’s horizontal position is perfect for front �ll and the convent 16 ohm impedance allows for four boxes per amp channel.
STX 4625P Specifications
FRONT VIEW SIDE VIEW BACK VIEW ISOMETRIC VIEW
1.69343
7.165
182
1.6
9343
4.7
2412
0
M10 (17 Plc's.)
TOP VIEW
1.6943
1.6943
3.8196.900
10.00255
4.72120
10.55268
4.72120
25
.50
647
07. 1
34
5.276134
1.
69 43
3.
00
76.2
Sensitivity, 1m/2.83V
Power Handling
Recomended Amplifier Power @ 4ohms
Rated Impedance
Input Connectors
Enclosure
Mounting Options
93db, 96db @ 1w/1m
480W AES, 720W IEC long term, 950W IEC short term
300W-1400W (FTC) @ 4 ohms
16 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Closed box alignment, 18mm marine plywood, heavily damped and braced
(16) M10 fly points. (1) M10 pull back point. 35mm adjustable (+/-) 18 degree top hat
System Type
Driver Components
Crossover
Maximum SPL
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
(4) 6” ribbon drivers + (4) 6.5” paper/Kevlar composite mid-bass drivers
Passive, custom
80Hz - 20kHz @ -6db
123db continuous, 133db peak
SPECIFICATIONS
System Coverage 110 degree horizontal, 25 degrees vertical (asymmetrical)
Accessories (optional) L Bracket kit (BKT-L66) for mounting under DRM 215 subwoofer Dimensions, (H x W x D) inches (mm)
Weight, net
Warranty
Height 25.63” (651 mm) Width 10.55” (268 mm) Depth 10.04” (255 mm)
40 lbs. (18.0kg)
Limited 5-year warranty
Frequency Response¹
Input4ohms
LoopOutput
TM
SubwooferModel STX 4625
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
Compact Low End
DRM 115
The DRM 115 Compact Subwoofer is designed for portable use (companion for the STX4625P array) as well as permanent installation uses with it's 16 integrated 10mm fly points, handles, 35mm pole socket and installed rubber feet.
The DRM115 delivers high output low frequency reinforcement when space is at a premium and uses one 15" long excursion high powered woofer with a dual layered 4" voice coil for exceptional reliability.
The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
DRM 115 Specifications
FRONT VIEWSIDE VIEW
ISOMETRIC VIEW
BACK VIEW
TOP VIEW
BOTTOM VIEW
Sensitivity, 1m/2.83V @1w/1m
Power Handling
Recomended Amplifier Power @ 4ohms
Impedance
Input Connectors
Enclosure
98db (40-200Hz)
600W (AES) continuous / 1200W (IEC) short term
800-2000W (FTC) @ 4ohms
8 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
System Type
Driver Components
Crossover
Maximum SPL
Subwoofer, vented enclosure, compact size, uniquely braced
1 x 15” low frequency driver with dual layer 4” voice coil and long excursion
Recommended HPF=35hz 24db Butwrth. LPF with STX4625P 100hz 24db Butwrth
38-300Hz @ -6db
126db SPL continuous / 132db SPL peak
SPECIFICATIONS
Dimensions, (H x W x D) inches (mm)Weight, net
Warranty
Height 22.13” (562 mm) Width 19.00” (482.5 mm) Depth 19.13” (486 mm)
66.0 lbs. (30kg)
Limited 5-year warranty
Frequency Response
Input4ohms
LoopOutput
TM
SubwooferModel DRM 118
Made in Phillppines
- - ++
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Mounting Options (16) M10 fly points, handles, rubber feet , 35mm pole socket
9.
5624
2.89
9.50241.30
19.00482.50
1.6943.03
15.61396.54
2.
3058
.42
13.1
033
2.74
19.13486.00
2.3058.42
9.56242.81
22
.13
562
1.
7043
.09
20.4
451
9.06
13.14333.63
14
.11
358.
30
15
.57
395.
50
9.50241.30
19
.13
486.
00
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
PS115/4625P
The Ultimate Portable SystemThis Portable System is ideally suited for traveling bands, DJ's and smaller venues, where portability and high quality sound reinforcement are required.
DRM 115 subwoofer utilizes one 15" long excursion, high-powered woofer wth a dual layered 4" voice coil for exceptional accuracy, speed and reliability. Designed for high impact low frequency response.
The STX 4625P is a symmetrically curved Line Array featuring four high power 6.5" custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax con�guration with a unique waveguide for wide 110 degree horizontal coverage.
Complete speci�cations for STX4625P and DRM115 can be found in the Stix & Drums 2015 Catalog
PS115/4625P Specifications
The adjustable mountingpole is adjustable in height from 31.5" to 52.5" and mounts between the top of the DRM 115 cabinet and the bottom of the STX4625P. Features include both a friction locking knob and a steel security pin.
Complete speci�cations for STX4625P and DRM115 can be found in the Stix & Drums 2015 Catalog
The STX4625P has an adjustable-angle receptacle located on the bottom of the enclosure. Vertical angle can be adjusted in 4º increments to +/- 18º.
52
.50
31.5
0 36º
FRONT VIEW SIDE VIEW SIDE VIEW
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
High Impact Mid Bass
DRM 212
The DRM 212 is designed for high impact mid bass/LF reinforcement to 60hz. Sharing the same height and depth footprint as the STX6600 and STX6620 arrays, it is the perfect companion when more SPL and mid bass punch is required.
The DRM212 uses two 12” long excursion high-powered woofers with a dual layered 4” voice coil for exceptional reliability.
The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
14.17360
10.
0425
5
1.2030.50
2.0
552
11.77299
3.
9410
0
30
.45
773.
43
7.24183.77
1.65
42
6.38162
10.04255
38.
0396
6
1.6
943
1.6
943
5.03127.79
DRM 212 Specifications
FRONT VIEW
SIDE VIEW
ISOMETRIC VIEW
BACK VIEW
TOP VIEW
BOTTOM VIEW
Sensitivity, 1m/2.83V @1w/1m
Power Handling
Recomended Amplifier Power @ 4ohms
Impedance
Input Connectors
Enclosure
101 dB (80-250)
1200 W AES continous / 2400W IEC short term
800-2000W (FTC) @ 4ohms
4 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles
System Type
Driver Components
Crossover
Maximum SPL
High Power Bass Module, Vented enclosure uniquely braced
2 x 12” low frequency driver with dual layer 4” voice coil and long excursion
Recommended HPF @ 60hz 24db Butwrth , LPF with Stix 200hz 24db LinkRil
60 Hz - 350 kHz @ -6 dB
128db Continuous / 134db Peak
SPECIFICATIONS
Frequency Response
Input4ohms
LoopOutput
TM
SubwooferModel DRM 118
Made in Phillppines
- - ++
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Mounting Options (16) M10 fly points, (1) M10 pullback point. Coupling Brackets for multiple stacked units included. (BKT-CP66).
Dimensions, (H x W x D) inches (mm)
Weight, net
Warranty
Height 38.03” (966 mm) Width 14.17” (360 mm) Depth 10.04” (255 mm)
95.0 lbs. (43.2kg)
Limited 5-year warranty
Accessories (optional) Optional coupling Bracket for articulating multiple 212’s to match array (BKT-CP21266)
Tight, Fast Low Frequency Response
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
The DRM 215 subwoofer designed for high impact low frequency reinforcement uses two 15” long excursion high-powered woofers with a dual layered 4” voice coil for exceptional reliability.
The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
DRM 215 Specifications
30.25768
40.
0099
0
FRONT VIEW
20.00508.5
14.76375
2.9575
1.6
943
8.75
222
1.6
943
35.5
990
4
SIDE VIEW
ISOMETRIC VIEW
7.
8720
0
15.12384
BACK VIEW
26.85682
1.693
43
14.
7537
5
20.0
050
8.4
2.30
58.4
TOP VIEW
9.25234.5
1.6943
11.77
299
4.03
102.
4
14.
7637
5
2.9
575
3.
9410
0
BOTTOM VIEWM10 (20 Plc's.)
Sensitivity, 1m/2.83V
Power Handling
Recomended Amplifier Power @ 4ohms
Impedance
Input Connectors
Enclosure
103db (40-150Hz)
1200W (AES) continuous / 2400W (IEC) short term
800-2000W (FTC) @ 4 ohms
4 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
System Type
Driver Components
Crossover
Maximum SPL
Subwoofer, vented enclosure, large displacement, uniquely braced
2 x 15” low frequency drivers with dual layer 4” voice coils and long excursion
Recommended HPF=30hz 24db Butwrth. LPF with Stix 120hz 24db Butwrth
32-300Hz @ -6db
131db SPL continuous / 137db SPL peak
SPECIFICATIONS
Dimensions, (H x W x D) inches (mm)Weight, net
Warranty
Height 39.00” (990 mm) Width 30.25” (768 mm) Depth 20.00” (508.4 mm)
127.6 lbs. (58kg)Limited 5-year warranty
Frequency Response
Mounting Options (16) M10 fly points, (4) M10 mounting for optional bracket. Rubber feet with mounting screws included
Input4ohms
LoopOutput
TM
SubwooferModel DRM 215
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
Accessories (optional) (BKT-L66) Optional mounting bracket for STIX arrays
Clean Extended Low Frequency Response
The DRM 118 subwoofer is designed for high impact low frequency reinforcement, it uses one 18” long excursion high-powered woofer with a dual layered inside/outside 4” voice coil for exceptional reliability and heat dissipation.
The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequencyresponse.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: [email protected] www.stixanddrums.com
DRM 118 Specifications
15.12384
18.
0745
9
FRONT VIEW
SIDE VIEW
ISOMETRIC VIEW
BACK VIEW
TOP VIEW
BOTTOM VIEW
Sensitivity, 1m/2.83V @1w/1m
Power Handling
Recomended Amplifier Power @ 4ohms
Impedance
Input Connectors
Enclosure
95db (40-150Hz)
1000W (AES) continuous / 2000W (IEC) short term
800-2000W (FTC) @ 4ohms
8 ohms
Screw terminal barrier strip and dual NL4 speakon connectors
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
System Type
Driver Components
Crossover
Maximum SPL
Subwoofer, vented enclosure, uniquely braced, large displacement
1 x 18” low frequency driver with dual layer 4” voice coil and long excursion
Recommended HPF=25hz 24db Butwrth. LPF with Stix 100hz 24db Butwrth
26-300Hz @ -6db
126db SPL continuous / 132db SPL peak
SPECIFICATIONS
Dimensions, (H x W x D) inches (mm)Weight, net
Warranty
Height 25.94” (659 mm) Width 30.25” (768 mm) Depth 23.94” (608 mm)
83.6lbs. (38kg)
Limited 5-year warranty
Frequency Response
Input4ohms
LoopOutput
TM
SubwooferModel DRM 118
Made in Phillppines
- - ++
By
Input Loop Output
NL4 Speakon Connectors
Screw terminal barrier strip
INPUT PLATE
23.
9460
8
1.6943
28.54725
1.
7243
.800
21
.03
534.
250
30.24768
1.7243.800
21.03534.250
1.
69 43
24.2
561
6
25.
9465
9
7.
0018
0.0
11.81300.00
23.94608
Mounting Options (16) M10 fly points, Rubber feet with mounting screws included for user placement