2016-17 EQUIPMENT AND INSTRUMENT CATALOGUE … · 2016-17 EQUIPMENT AND INSTRUMENT CATALOGUE The...

www.vetquip.com.au

2016-17 EQUIPMENT AND INSTRUMENT CATALOGUE

The Right Choice in Veterinary Equipment

VetQuip sales and service centre to better serve you...

NSW Head Office, Unit 5, 6 Gladstone Road, Castle Hill, Sydney, NSW 21541300 888 42702 9899 [email protected]

All prices in this brochure are listed in Australian Dollars exclude GST

VETQUIP CENTRE

We accept

For all export order enquiries please contact our NSW office or [email protected]

1300 888 [email protected]

EXPORT DIVISION

VetQuip Veterinary ORTHOPAEDIC

VetQuip Veterinary Surgical INSTRUMENTS

VetQuip is committed to providing the Australian Veterinary industry with quality

products and services. Through our relationship with manufacturers and our

dedication to sourcing globally recognised leading brands, VetQuip continues to

supply the latest instruments and equipment at competitive prices.

VetQuip Veterinary EQUIPMENT 2–97

111–144

98–110

VetQuip 2016-17 Catalogue

VETERINARY EQUIPMENT

ABBOTT ANIMAL HEALTH ........................................................... 3–4

ANAESTHESIA ...............................................................................5–22

MONITORING..............................................................................23–34

WELCH ALLYN .............................................................................35–39

STETHOSCOPES ............................................................................... 40

MILA ...............................................................................................41–47

DIAGNOSTICS/CONSUMABLES .............................................48–56

DENTAL .........................................................................................57–64

SUBURBAN CAGES ....................................................................65–69

CAGE ACCESSORIES ..................................................................70–71

TOTAL PEN SYSTEM ........................................................................ 72

OPERATING TABLES & ACCESSORIES ..................................73–77

STAINLESS STEEL PRODUCTS ................................................78–82

ELECTROSURGICAL ................................................................... 83-84

IV FLUID THERAPY .....................................................................85–87

GOWNS AND SCRUBS .................................................................... 87

SURGICAL DRAPES AND WRAPS ................................................. 88

SURGICAL ACCESSORIES ............................................................... 89

AUTOCLAVES ...............................................................................90–92

SURGICAL LIGHTING ................................................................93–97

VetQuip Veterinary EQUIPMENT

3Please call for latest pricing. Prices and specifications are subject to change without prior notice

VETERINARY EQUIPMENT VETERINARY EQUIPMENT

VetQuip Veterinary EQUIPMENT VetQuip are the exclusive Australian Distributors for Abbott Animal Health.

For more information and a full list of products call the VetQuip Sales Team on 1300 888 427

AlphaTRAKBlood Glucose Monitoring SystemHelping you and your clients manage pet diabetes

ACCURACY MADE EASY Veterinary specific

Updated test strip design

Sample tabs make it easy to wick blood into the strip

Results within seconds

Small sample size, only requires 0.3 uL of Blood.

ABB32115-01 Alpha TRAK2 starter kit ABB32109-46 Alpha TRAK2 test strips 50Pkt ABB32111-46 Alpha TRAK2 control solution ABB32113-46 Alpha TRAK2 lancets 100pkt



ANAESTHESIA

Merlin Small Animal VentilatorThe Merlin ventilator can be used on small animals, from rodents to large dogs. The Merlin is able to precisely control ventilation parameters, to ensure your patient is as safe as can be during mechanical ventilation. The Merlin doesn’t require a compressed gas supply to operate, so is quiet and smooth.

The Merlin is controlled by a state-of-the-art microcontroller, enabling you to set the independent ventilation parameters that you want without compromise. A further added feature, is the inspiratory assist control that will tune the ventilator to your patient during recovery, to assist weaning off the ventilator. On the front of the unit is a large easily readable display, that shows all of your selected parameters. These parameters are continuously updated reflecting every adjustment made.

The Merlin is truly innovative in being the first veterinary ventilator to calculate and display the compliance of the patient being ventilated.

SPECIFICATIONS Capacity: 1ml to 40mls in 1ml increments

40mls to 120 mls in 5ml increments 120mls to 800mls in 10ml increments

Flow rates: 0.1 to 3.5L/min in 0.1L increments 3.5 to 25.0 L/min in 0.5L increments

Inspiratory/expiratory times: 0.5 to 9.0 seconds in 0.1 second increments

Pressure settings: 1 to 57 cm H2O pressure in 1 cm H2O increments

Inspiratory assist setting: -1 to –10 cm H2O pressure in 1cm H2O increments

Valves: electrically operated solenoid valves Stainless steel and silicon construction

LCD Module: backlit 80-character 4-line display

Alarm mode: audible – 2kHz buzzer visual – flashing red LED and screen message

Gas connections: front fixing 22mm O/D, 15mm I/D stainless steel ports

Power failure mode: all valves open. Manual IPPV can be performed

Suitable for use in rebreathing and non-rebreathing circuits

FEATURES Precise, reliable control over all ventilation parameters.

Pressure cycled, time cycled or volume cycled IPPV.

Patient disconnect and over-pressure alarms

80-character screen and high definition LED’s, give full parameter information: tidal volume, minute volume, inspiratory and expiratory airway pressure, i:e ratio, patient compliance, respiratory rate, inspiratory time, expiratory time, maximum allowed airway pressure, assist effort.

Purpose designed, stainless steel and silicon valves for precise flow control.

Standard 22mm/15mm fittings

Suitable for anaesthesia or ICU

Mains powered with fail-safe operation

Assist mode

VetQuip is committed to providing the Australian Veterinary industry with quality products and services. Through our relationship with manufacturers and our dedication to sourcing globally recognised leading brands, VetQuip continues to supply the latest equipment at competitive prices.

COMMITTED TO QUALITY

VQ3022

VQ3022

6 Phone 1300 888 427 or 02 9899 6666 Fax 02 9899 4911 E-mail [email protected]


ANAESTHESIA

Anaesthesia Ventilator TH-1(A)FEATURES

Independent Anasethesia Ventilator, with IPPV, SIMV and Manual mode With necessary monitoring and alarm function, to make sure the operation safety Gas supply: O2, medical Air With international connector, can be matched wirh carious brands of anaesthesia machines

SPECIFICATIONS Respiration Mode IPPV, SIMV, Manual Display 5.5’ SNT screen Waveform P-t, V-t Tidal Volume 50ml~1600ml Respiratory Frequency 1 to 65 BPM I:E Ratio 8:1 ~ 1:8 Monitor Parameters: Tidal Volume, Minute Ventilation, Airway Pressure

VQ3019

Vetronic SAV03 Small Animal VentilatorThe SAV03 is a mains-powered, pressure cycled ventilator, designed by vets for use on intubated animals up to 60kg. Using the incoming gas from your anaesthetic machine, the SAV03 controls the gas delivered to the patient in the inspiratory phase, until a set airway pressure is reached, at which point the patient is allowed to exhale. A user-defined delay then elapses, before inspiration begins again and the cycle repeats. By using pressure cycled ventilation, it is easy to ventilate even very small animals safely. The peak airway pressure can be adjusted to control the depth of respiration. This airway pressure is shown on a clear bright digital display, together with valve status indicators for instant visual feedback on the state of your patient. The SAV03 can be safely used in mammals, birds and reptiles for procedures lasting from minutes to hours.

FEATURES Simple yet versatile to use Small unobtrusive unit Works on a range of species Independent control of

inspiratory and expiratory parameters

For animals from a few grams to over 60kg Fits neatly on the operating table or anaesthetic

machine Will work with any standard anaesthetic machine Has standard 15mm connectors for ET tubes Clear digital display and status indicators Working range from 1 to 40 cm H2O pressure Mains powered with automatic fail-safe mode

VQ3021-3

Vetronic SAV04The SAV04 is our new version of the SAV03 and has the following features:

Battery back-up for emergency or mobile use Clear and bright visual display Measurement and display of Inspiratory time and

Respiratory Rate Automatic valve unit calibration Overpressure Alarm Apnoea Alarm Microprocessor controlled Select-and-commit entry, to avoid false changes Extremely rugged design Adjustable feet for preferred tilt and viewing angle Runs from 9 Volt wall charger PC connection for Data logging, Firmware upgrades and

External control Same intuitive interface as the SAV03

VQ3021-4



ANAESTHESIA

Modular Anaesthetic MachineThe Modular Anaesthetic machine is VetQuip’s top of the range unit, it incorporates a precision Anaesthetic machine on top of our quality Anaesthetic trolley. The Modular machine uses our precision 0-8L flow meter with a calibrated rotameter, high flow flush valve and Professional large canister absorber that holds a massive 1Kg of soda lime for those long cases. Thinking of upgrading your Anaesthetic machine, then this is the unit that will offer top of the range specifications, professional quality build and that added feature of a rugged aluminium storage trolley.

FEATURES “Quick change” Soda Lime canister /

single hand operation Soda Lime canister holds 1kg -60 to 60cm H2O manometer gauge Integral Uni-directional valves with

ceramic valve disc’s

Ventilator mode optional Fully adjustable scavenge valve Swinging arm style re-breathing bag

mount Monitor Self with Silicon Spill Rail Made from Aircraft grade Aluminium

VQ3006(a) (excludes vaporiser)

VetQuip Anaesthetic Machines

On 5 Star Base with Monitor Shelf (excludes vaporiser and regulator)

This range of anaesthetic machines, have been designed and assembled in Australia. Every attention has been paid to detail and all components are of the highest quality. We believe this machine offers you all the features you require, within the price range you demand. Powder coated platform with adjustable height support pole, with a polished trolley base and anti-spill rail.

FEATURES Out of circuit circle system Polycarbonate circle absorber featuring on/off scavenger valve Precision oxygen flowmeter 0 - 8Lpm with graduated scale, ideal for low flow

anaesthesia High volume 02 flush button at 80Lpm New “quick circuit” vaporiser outlet system, change from circle system to

Ayres T piece or bains circuit.

VQ3000(a)

Pole Mounted O2 Cylinder Holder (optional)Holds ‘D’ size cylindersVQ3025

VQ3000(a)



Wall Mount Compact Model Anaesthesia SystemBlue anodised aluminium U-style frame, practical and portable.

FEATURES Out of circuit circle system Polycarbonate circle absorber featuring on/off scavenger valve Precision Oxygen flowmeter 0 - 8Lpm with graduated scale, ideal

for low flow anaesthesia 0 to 8 Lpm, logarithmic scale. High volume 0 flush button at 80Lpm

VQ3005 (excludes vaporiser and regulator)

VetQuip now offer custom built anaesthesia machines and components

ANAESTHESIA

Compact Model (excludes vaporiser and regulator)

Blue anodised aluminium U-style frame, practical and portable.Including Precision O2 flowmeter and flush valve.

VQ3015(a)

VQ3015(a)width 450mm, height 450mm, depth 250mm

Research Compact Model (excludes vaporiser and regulator)

Same frame and components as the compact model, but with a precision flowmeter 0-1lpm. Supplied with specialist rodent circuit.

VQ3014-G(a)

Research Anaesthesia Machine 3 Way Delivery Manifold Built to customer specifications. Please enquire about a custom solution, built to suit your needs.



ANAESTHESIA

VetQuip “PRO” Anaesthesia systemFEATURES

New slim line design, with monitor shelf. Powder coated, impact resistant chassis. Directional handle Balanced, polished alloy 5 star base, with platform height adjustment. Out of circuit circle system Polycarbonate circle absorber featuring on/off scavenger valve Precision oxygen flowmeter High volume 02 flush button at 80Lpm New “quick circuit” vaporiser outlet system, change from circle system to Ayres T piece

or bains circuit.

VQ3009(a) (excludes vaporiser, monitor and regulator)

Pole Mounted O2 Cylinder Holder (optional)Holds ‘D’ size cylindersVQ3025

Anaesthesia Circuit Pressure Manometer (optional)Manometer with T piece adaptor, measures the pressure of the gases within the anaesthetic system (expressed in centimetres of water), which in turn reflects the pressure of gas in the animal’s airway and lungs.VQ3450(a)

VQ3009(a)

For extremely competitive prices and exceptional service contact VetQuip on 1300 888 427

Our experienced biomedical technicians service and repair an extensive range of medical

equipment. VetQuip’s commitment to quality and customer care is established throughout all

departments within the company. Professional, friendly and helpful staff, are always available to

discuss your requirements and to provide answers to your technical questions.

Ohmeda Blease Penlon DragerThe Right Choice in Veterinary Equipment The Right Choice in Veterinary Equipment The Right Choice in Veterinary Equipment The Right Choice in Veterinary Equipment

Vaporiser ServicingVetQuip’s vaporiser service centre offers full service for all models of:

Conversions to Isoflurane and Sevoflurane now available for a wide range of vaporisers.

All Vetquip Anaesthetic machines come complete with Nexus F Circuit and Ayres T Piece and 2 L rebreathing bag so all you need is a Vaporiser and It is ready to use.



Reconditioned Vaporisers

Penlon Delta SevofluraneNew Penlon Delta Sevoflurane vaporisers (10 year service life) cage or selectatec mount VQ1334

New Penlon Delta Isoflurane vaporisers (10 year service life) cage or selectatec mount VQ1335

Penlon Delta Isoflurane

Blease B Series Isoflurane (reconditioned) selectatec/key fill vaporiser. Blease B Series is designed to provide constant output throughout complete flow range from 200ml/ per min to 15L/per min.

225ml Anaesthetic agent capacity Highly accurate for low flow

anaesthesia delivery

VQ1337-BT

VQ1334

Reconditioned Penlon Delta Isoflurane vaporiser, selectatec mount, key fill.

VQ1336

Penlon Delta Isoflurane Vaporiser

Blease B Series Isoflurane Vaporiser

ANAESTHESIA

Mallard 2800C Large Animal Anaesthesia Machine with Ventilator FEATURES

Microprocessor based electronic control system incorporates the features of current intensive care ventilators with microprocessor technology

Optional MRI compatibility L.E.D display of selected respiratory variables Inverted 18ltr bellows, ascending during exhalation as used in Human anaesthesia ventilators Patient may breathe spontaneously from the bellows Optional paediatric through adult application possible with separate paediatric bellows of

2.2ltr capacity allowing it to accommodate much larger and smaller patients than conventional large animal anaesthesia ventilators.

Flow rate adjustable from 0-600ltrs per minute with expanded range of flow rate selectively Incorporates the most advanced techniques from human mechanical ventilation Extremely quiet in operation Designed to interface with Mallard Medical Model 2850TB Absorber Circuits Newly designed stand for convenient location of all components including multiple vaporizers.

Stand includes GCX mounting rail for convenient location of physiological monitors Multiple electrical outlets with surge protection Balanced stand accommodates positioning and ease of movement Quick Change Soda Lime Canister Servicing is extremely minimal and easy. May be conducted within the Medical facility by

qualified technicians. The bellows are cleaned in place, no need to remove bellows for cleaning.

VQ3011 please call for latest pricing



New Vaporisers

Penlon Delta Isoflurane Vaporiser

Vetquip Tec 3 Isoflurane Vaporiser

Holds 125mls Agent

0-5% Output

Selectatec or Cage Mount

ANAESTHESIA

TEC 3 Vaporiser Mounts

Compatibility BlockConverts cage mount anaesthesia machines to selectatec enabling you to fit a late model vaporiserVQ3090(a)

Selectatec Conversion BlockVQ1360

Cage Mount AdaptorVQ1370

Convert your Tec 3 vaporiser mounting system from selectatec to cage mount, or vice versa.

Key Fill Bottle AdaptorIsoflurane key filler must be used with appropriate anaesthetic agent

VQ3100

Precision Flowmeter0 - 8Lpm with precise low flow gradations

VQ3120(a)

Vaporiser Inlet Fitting VQ1900

Vaporiser Outlet Fitting VQ1910

Pressure ManometerManometer with T Piece Adaptor measures the pressure of the gases within the anaesthetic system (expressed in centimetres of water), which in turn reflects the pressure of gas in the animal’s airway and lungs.

VQ3450(a)

VQ3120(a)VQ3100

VQ3450(a)

VQ1900

Key Filler

2 year warranty

VQ1499

BEWARE OF IMITATIONSPrecise, constant Isoflurane

delivery from a quality vaporiser. Includes: Brass

sump, Brass heatsink, Diva disc lined rotary valve.

Individually calibrated to guarantee performance.



VQ3169(a)

Active Scavenge SystemDue to workplace safety being such a key issue for vets today, this active scavenge system is a necessity. This unit will effectively and silently remove potentially dangerous anaesthetic waste gas from your surgery area. The control box can be situated either on the wall or on your anaesthetic machine trolley. Complete with scavenge hose and stainless steel wall adaptor plate. Mains powered.

VQ3169(a) Quiet operation

Additional Stainless Steel Wall PlateVQ3168(a)

Aldasorber Medical Filter

This large absorber canister, absorbs up to 200 grams of waste anaesthetic gas.

VQ3220

VetQuip Clean Air Filter

The Clean Air Filter, effectively eliminates excess halogenated anaesthetic gases preventing patient inhalation in the operating-room. Each Clean Air canister offers an average useful life, of 12 to 15 hours. Clean Air can remove no fewer than 50 grams of waste gases and then can be conveniently discarded. Not for use with flammable gases.

VQ3222

ANAESTHESIA

Silicone Oxygen HoseSilicone hose to connect vaporiser outlet fitting to sodalime canister

VQ3182 4.8mm ID x 450mm VQ3180 6.4mm ID x 450mm

Silicone oxygen hose can be supplied in longer lengths

Scavenge TubePink corrugated scavenge tube, 22mm diameter.

VQ3190 Per Metre



ANAESTHESIA

VQ3370 500ml VQ3380 1ltr VQ3390 2ltr VQ3400 3ltr

VQ3410 ½ltr VQ3415 1ltr VQ3420 2ltr VQ3422 3ltr VQ3421 ½ltr with tap

Anti-static black rebreathing bags

VQ3425-1 1ltr VQ3425-2 2ltr VQ3425-3 3ltr VQ3425-4 4ltr VQ3425-5 5ltr VQ3425-6 6ltr 22mm neck22mm neck22mm neck

Latex free autoclavable rebreathing bags

Green neoprene latex free rebreathing bags

Soda Lime CanisterSmall animal, soda lime canister with scavenge valve. This soda lime canister is made from strong polycarbonate. Canister features internal inspiratory/expiratory and scavenge valves.VQ3150

Soda Lime Canister Mounting AdaptorAnodised aluminium mounting adaptor VQ3160

Soda Lime Canister Scavenge Tube AdaptorStrong polycarbonate scavenge tube adaptor/reducer 30/22mmVQ3170

Soda Lime Canister System

Rebreathing Bags

VQ3150

VQ3170VQ3160

VetQuip Mini Veterinary AbsorberFor quite a while customers have been asking us for a high quality replacement of our Soda Lime canister but not as big as a Precision canister, and here it is!

FEATURES Quality Anodised Aluminium manifold Unit Polycarbonate Soda container Large manometer valve doubles as a circuit leak tester Precision CNC made flapper valve unit Low pressure APL valve unit to scavenge Quick Allen key soda change

Call us for mounting options to suit your machine

VQ 3158



VetQuip Precision Veterinary AbsorberFEATURES

“Quick change” soda lime canister / single hand operation Soda lime canister holds 1kg -60 to 60cm H2O manometer gauge Integral uni-directional valves with stainless valve disc Ventilator mode optional Fully adjustable scavenge valve Swinging arm style re-breathing bag mount

VQ3159-P(a)

MDI ‘KAB’ Circular Soda Lime CanisterSmall animal circular soda lime canister manufactured from polycarbonate incorporating internal inspiratory/expiratory and scavenge valves

VQ3153

Standard circuit connections

Oxygen Therapy SystemOxygen therapy system, 0-15Lpm flowmeter, bottle humidifier, 2 mtr oxygen hose with hand wheel and oxygen delivery tubing.

VQ3097(a)

Cage Mounting BracketCage mounting bracket for oxygen therapy system

VQ3097-B(a)

TM11 HumidifierThe TM11 Humidifier is a bubble through humidifier designed to humidify dry gases (ie. Medical Oxygen)

Pressure relief valve/alarm which operates if the therapy tubing or downstream accessories become obstructed

Rugged construction for reliability and durability for years of constant use

Couples directly to flowmeters

Water Capacity 200ml at Max fill level

Pressure relief valve 35-100kPa @ 20 l/min

TM11 HumidifierVQ3095

TM11 Replacement JarVQ3096

VQ3095

VQ3097(a) VQ3097-B

ANAESTHESIA



ANAESTHESIA

COLOUR CHANGE UPON DESICCATION Unlike other CO2 absorbents, SodaSorb®LF permanently changes colour upon desiccation. Desiccation impairs carbon dioxide absorption and may cause extreme and hazardous heat conditions, leading to the production of carbon monoxide. SodaSorb®LF absorbent will not heat up to extreme temperatures even if it desiccates, and it inhibits production of carbon monoxide.

GRADIENTS OF COLOUR CHANGE Sodasorb®LF is designed to gradually change colour. This provides an indication of degrees of exhaustion, as opposed to the old method in which the height of the colour change alone indicated exhaustion. This gradual colour change gives the clinician more information about the status of the absorbent. Unlike traditional carbon dioxide absorbents, the colour change is permanent. In summary, our colour change upon desiccation and our gradients of colour change provide the Veterinarian with more information about the status of the absorbent than its competitors.

BETTER FOR THE ENVIRONMENT The new formulation in Sodasorb®LF absorbent, consists of materials that have a lower pH than conventional absorbents. For this reason, once the product has been utilised, it disposes more easily in the environment, by converting to naturally occurring minerals. Unlike most absorbents, Sodasorb®LF absorbent reduces potential harm to the environment and helps to ensure there is no risk of prolonged damage to animal or plant life.

FEATURES Formulation prevents generation of compound A and carbon monoxide Permanent color change when absorbent is exhausted Indication of desiccation Same absorption efficiency as regular Sodasorb®

Sodasorb®LF has very low levels of strong base

BENEFITS Provides a safer operating environment; ensures well-being of patients and staff. Unique feature, providing cost savings and easier (more accurate) change-outs. Eases concerns of potential hazards in O.R. that can promote dangerous byproducts Maintain the confidence you’ve always had with regular Sodasorb®

Friendlier to the environment

VQ3145 4.2kg No other CO2 absorbant provides this indication

Sodasorb® LFFresh Sodasorb® LF pellets are white. When carbonated (“exhausted”) they turn violet permanently. When desiccated (“moisture-free”) they also turn blue-purple! Sodasorb® LF promotes the safest operating environment, by matching the absorbent capabilities with the risk profile of Low Flow Anesthesia. The formulation of Sodasorb® LF consists of materials that have a lower pH, so it disposes more easily and converts to naturally occurring minerals, resulting in lower environmental impact. Sodasorb® LF performs as well as traditional absorbents in Low Flow Anesthesia and can improve efficiency over 2nd generation absorbents.


Latest design cabinet allows easy access to oxygen generator equipment

Control Panel with main switch, time meter, pressure gauge and operating mode control

Includes compressed-air piston compressor (oil-free), with air intake filter (99,999%)

Radial Ventilator and Oxygen Booster to max. 5.5 bar

Temperature Alarm Monitor with Automatic Switching

Oxygen PSA Module

PRODUCT FEATURES:

IMT-POC 010 (10 Lpm constant)

IMT-POC 020 (20 Lpm constant)

OXYGEN GENERATOR

BENEFITS:Constant quality control is ensured by measuring oxygen purity. All measured values are recorded and saved using our user-friendly INMATEC touch control panel and can be monitored remotely from anywhere in the world with internet access.The effectiveness of the new technology promises savings from the very first minute.Low-maintenance valve technology and compact design are further benefitsin addition to the constant availability of pure oxygen.in addition to the constant availability of pure oxygen.

PSA-TECHNOLOGY:IMT-PO oxygen generators guarantee oxygen production on site. First, standard IMT-PO oxygen generators guarantee oxygen production on site. First, standard inlet filtration removes impurities, such as moisture, oil vapours, particles and hydrocarbons. In the next step, zeolite, a synthetic crystalline aluminium silicate, adsorbs the nitrogen and carbon dioxide molecules from the previously cleaned compressed air in the two molecular sieve beds. The free oxygen molecules flow unhindered into the product tank. In order to ensure a constant oxygen flow, the two sieves alternate between adsorption mode and regeneration mode. The oxygen produced in this way can now be used in a wide variety of applications.produced in this way can now be used in a wide variety of applications.

INMATEC OnTouch oxygen technology enables oxygen to be supplied in a purity of up to 99.5% and quantities of 0.5 / 2,000 Nm³/h.

IMT-PO OnTouch


ANAESTHESIA

Meet the AirSep NewLife Intensity 10

FEATURES Higher outlet pressure for delivering up to 10LPM of continuous flow oxygen Added failsafe integrated O2 concentration alarm. No more tanks to refill No more oxygen tank deliveries Enables the use of standard accessories and long tubing runs without a drop-off in flow Low flowmeter blocks for pediatric and other low-flow applications are available The AirSep NewLife 10 can deliver oxygen to two users at a time

Available with single outlet or Double outlet.

VQ3087-S(a) VQ3087-D(a)

The AirSep NewLife Intensity 10 provides you with high pressure and maximum flow from a simple floor-standing oxygen concentrator. The NewLife is able to handle the most challenging oxygen applications and is even able to accommodate two patient set-ups, which are easily achieved with this system.



ANAESTHESIA

VetQuip Anaesthesia CartThe VetQuip Anaesthesia Cart is designed with a vast array of functions and technology to complement all aspects of an anesthesia department

SPECIFICATIONS Stainless steel tray with ABS plastic

surround top 10 x multi-bin containers One centralised lock for all drawers

VQ3007

Automatic Change-Over Manifold SystemThe M120 range of manifolds is a compact gas supply system for installations, requiring uninterrupted low to medium flows of gas, at constant pressure. The manifold is constructed from chrome plated brass and is for use with non-corrosive gases.

The manifold consists of two banks of cylinders, one on each side of the pressure control assembly. The position of the lever determines which bank of cylinders is “in use” and which is “in reserve”. The manifold draws gas from the “in use” cylinder bank.

VQ3085

5 Aluminium powder coated drawers 4 noiseless casters and 2 with brakes High-quality structural aluminium columns Dimensions: 675mm (w) x 475mm (d) x

920mm (h)



EZI – Flow FlowmetersProvides an accuracy of +/- 5% (of full scale reading) and is pressure compensated to ensure that the flowmeter maintains its accuracy, independent of varying gas supply pressures. Flow limiting output orifice and fail safe shroud protects the patient from excessive flows in the event of excessive gas pressures.

Dual taper needle valve, prevents damage to the seat. Gas specific inlet fitting, to prevent connection to wrong gas type. Colour coded inlet fittings, outlet fittings, and control knobs, for quick recognition of the gas used by the flowmeter. Incorporates durable impact resistant polycarbonate outer and metering tubes The flowtube design provides clear readability, with large bold print lines and numbers providing 180º visibility.

RATED AIR FLOW : 0-15 l/min. Inlet Pressure: 400kPaVQ3091

RATED AIR FLOW : 0-2.5 l/min. Inlet Pressure: 400kpaVQ3092

ANAESTHESIA

For information on our entire range, competitive pricing and exceptional service contact VetQuip today on 1300 888 427

Regulators

Flowmeters



Gas pipelines

Accessories



VetQuip Medical Gas SuppliesVetquip now offers a full range of Comweld Medical equipment including:



ANAESTHESIA

Oxygen FlowmeterFeaturing a durable polycarbonate hood and metering tube, this high quality flowmeter represents exceptional value.

Flow range of 0-15 l/min Back-pressure compensated High-quality stainless steel ball float

providing unparalleled accuracy Needle valves in the flowmeter body

provide precise flow control

VQ3116

Medical Oxygen Regulator Pin IndexCylinder pressure scale 0-30000 KPA

VQ3040

Medical nitrous and air regulators also available

Encapsulated Seat Technology (EST) ensures superior performance, accuracy and resistance to ‘surging’. Large diameter diaphragm, gives a performance that is normally only found in double stage regulators

Triple filter system, increases the regulator performance by preventing foreign particles from getting in contact with the high pressure gas, or the regulator seat.

No tools are required to routinely disconnect the regulator from the cylinder valve

A safety relief valve is built into the regulator to protect staff and patients in the event of high pressure failures

Tamper resistant design to ensure only qualified personnel can access the regulator

Colour coded pressure gauges and identification labels for quick recognition of the gas used by the regulator

Gas specific inlet fittings and outlet fittings to prevent fitting to the wrong gas type

Series O Oxygen Regulators

Pin IndexMax. Outlet Pressure: 400kPaMax. Rated Inlet Pressure: 20,000kPa@15ºC

VQ3099

Bodok Regulator Seal

VQ3030

Tool Air 700KPA Fitting Suits Synthes Air ToolsVQ3036

Wall Plate Single for Oxygen OutletAlso for single surf gang box. VQ3034-1P(a)

3 hole Utility Plate Oxy/Scav/AC Power

VQ3034-3UP(a)



Multipoint Terminal Wall Outlets

VQ3031 Oxygen - White VQ3031-1 Medical Air - Black VQ3031-2 Nitrous Oxide - Blue VQ3031-3 Direct Suction - Yellow VQ3031-4 Surgical Tools - Aqua VQ3031-5 Direct Scavenge - Beige

The Multipoint 3 ranges of terminal wall outlets continue the tradition for high quality, performance and reliability of the Multipoint name.

High quality performance and reliability Unique gas specific diameter indexing system, prevents

incorrect assembly of units on installation or when dismantled for maintenance.

Minimum parts for simplicity and lower maintenance costs Highly visible colour coded name plates, make it easy to

identify the gas or suction service. Suits various installation requirements – wall, pendant, column

or duct mounting. Connection Mode: screw type/single action Outlet Connection: S.I.S sleeve

(Australian Standard)

ANAESTHESIA

Wall Suction Vacuum Outlet

Outlet With tap and bronze filter

VQ3072

Outlet with GaugeWith gauge, tap and bronze filter.

VQ3074

Wall Scavenge Handwheel Hose AdaptorFor 22mm scavenge tubing

VQ3075(a)

Oxygen 3 Way Hose AdaptorVQ3044

Oxygen HoseOxygen hose to connect regulator with flowmeter

VQ3059 Oxygen hose (white) per mtr VQ3060 Hand wheel kit BIO-OTK 11-13 oxygen line crimp clamp VQ3061(a) 2 mtr oxygen hose and 2 hand wheels VQ3062(a) 4 mtr oxygen hose and 2 hand wheels

VQ3044

VQ3061

BIO-OTK

VQ3060

VetQuip sell an extensive range of anaesthesia accessories including rebreathing bags, sodalime canisters, breathing circuits, medical regulator/O2 delivery hose, new and reconditioned vaporisers.

ACCESSORIES



ANAESTHESIA

Circle Breathing CircuitY-hose circle breathing circuit, 1.6mtr limbs.VQ3320 Paediatric 15mm VQ3340 Adult 22mm Standard corrugated tubing

Nexus F CircuitCoaxial rebreathing circuit. 4.5kg - 80kg patient range, 1.5mtr in length. Supplied complete with antibacterial filter.VQ3360

Supplied with antibacterial filter

Nexped CircuitPaediatric coaxial rebreathing circuit 1.5mtr in length. Supplied complete with antibacterial filter.VQ3347 Supplied with antibacterial filter

Minimum Deadspace Bains CircuitCoaxial circuit with ultra APL valve, 1.6mtr in length.VQ3319(a) Supplied with rebreathing bag

Bains CircuitCoaxial circuit with ultra APL valve, 1.6mtr in length.VQ3310 Supplied with rebreathing bag

Mini Bains CircuitDesigned with small animal anaesthesia in mind offering minimal dead spaceVQ3300

Combination coaxial circuit

Ayres T PiecePaediatric circuit with ultra APL valveVQ3350 Standard 22mm bag neck

Rodent CircuitUnique circuit with low dead space and fresh gas/scavenger chamber. Supplied with size 0 face mask, 2m of fresh gas delivery hose and 3m scavenger tubing.VQ3315(a)

Anaesthetic CircuitsVetQuip supply a wide range of anaesthetic circuits and replacement rebreathing bags

VQ3340



ET Tube RackStainless steel construction and designed to hang on cage wallVQ3583

Anaesthetic Face MaskClear face mask with a rubber diaphragm ensuring a snug fitVQ3600 size 0 5cm 15mm OD (connector) VQ3600-1 size 1 6.0cm 15mm OD (connector) VQ3600-2 size 2 6.5cm 22mm OD (connector) VQ3600-3 size 3 9cm 22mm OD (connector) VQ3600-4 size 4 11cm 22mm OD (connector) VQ3600-5 size 5 14cm 22mm OD (connector)

Mila Silicone ET TubesNew Mila silicone cuffed ET tubesMETC20 ID:2mm OD:4mm 14cm METC30 ID:3mm OD:4.7mm 16cm METC40 ID:4.0mm OD:6.0mm 18cm METC50 ID:5.0mm OD:7.3mm 20cm METC955 ID:9:0mm OD:12mm 55cm METC1055 ID:10mm OD:14.3mm 55cm METC1155 ID:11cm OD:15.7mm 55cm METC1255 ID:12cm OD:17mm 55cm

Vet-TubeRange of cuffed PVC endotracheal tubes supplied with adaptorVQ3500 3.0mm PVC VQ3505 3.5mm PVC VQ3510 4.0mm PVC VQ3515 4.5mm PVC VQ3520 5.0mm PVC VQ3525 5.5mm PVC VQ3530 6.0mm PVC VQ3535 6.5mm PVC

VQ3540 7.0mm PVC VQ3545 7.5mm PVC VQ3550 8.0mm PVC VQ3555 8.5mm PVC VQ3560 9.0mm PVC VQ3565 9.5mm PVC VQ3570 10.0mm PVC VQ3580 11.0mm PVC

Extra Long ET TubesNew extra long PVC ET tubeVQ3581 12 mm 55cm VQ3582 13 mm 55cm

ANAESTHESIA



FEATURES 10.4” touch screen display Veterinary specific operating

system software Nellcor OXI Max SpO2 5 lead ECG

STANDARD CONFIGURATIONNellcor SpO2, Printer, Dual Temp, NIBP, PR, 5lead ECG.

OPTIONAL EXTRAS Wall and mobile mounting options available

MONITORING

VetQuip C80V

VetQuip C50V

VetQuip C30V

FEATURES 12.1” Touch screen display Veterinary specific operating

system software Nellcor OXI Max SpO2 2 channels of invasive blood pressure 5 lead ECG Arrhythmia and S-T segment analysis

STANDARD CONFIGURATIONNellcor SpO2, Printer, Dual IVBP, PR, Dual Temp, NIBP, 5lead ECG.

OPTIONAL EXTRAS Optional anaesthesia gas module Wall and mobile mounting options available

FEATURES 4.3” Touch screen display Veterinary specific operating

system software Lithium Ion Battery Touch Screen Nellcor OXIMax SpO2 NIBP

Resperonics EtCO2 add anytime (software and plug)

Lithium Ion 4 hr back up battery Thermal printer 9 waveform display, trends. Standard display and big font

display options Interfaces: SD card, USB, VGA.

Arrhythmia and S-T segment analysis Resperonics EtCO2 add anytime

(software and plug) Lithium Ion 4 hr back up battery Thermal printer Interfaces: SD card, USB, VGA.

VQ5595-C80V

VQ5595-C50V

VQ5595-C30V

OPTIONAL EXTRAS 5 lead ECG Temperature Resperonics ETC02 add anytime

Cardell® Touch Multiparameter Monitor

FEATURES 10.5“ touch screen makes patient set up faster

and easier, or use the traditional-style buttons located below the screen.

Redesigned menus and improved controls allow for intuitive navigation

Smaller and lighter form, allows for easy transportation without sacrificing visibility.

World Class Cardell® BP, Nellcor™ SpO2, and upgrade to CO2 monitoring at any time, by adding a Respironics sidestream or mainstream CO2 module.

Phasein Multigas available Enhanced ECG data export capabilities USB port for downloading patient data Customisable alarm settings for up to three users Optional integrated 3-channel graphical printer 2-year warranty

Accuracy and reliability at your fingertips

MONITORING



Midmark has designed the precision and consistency you expect from the Cardell® name into a fast, light and intuitive touch screen vital signs monitor.Above all, an anesthesia monitor should be safe, reliable and user-friendly. The Cardell® Touch is highly advanced, yet easy to use. With veterinary-specific algorithms and exclusive Cardell® Blood Pressure Technology, the Touch is the latest innovation from the most trusted name in veterinary vital signs monitoring.

VQ5582-TOUCH1

Cutting edge CO2 technology

MONITORING



As the recognised global leader in main and side stream capnography, Respironics has been providing innovative and cost effective solutions for over 20 years. The CAPNOSTAT sensor and the LoFlo sensor are the ideal capnography solutions for your monitoring needs.

Respironics Capnostat Mainstream CO2 sensor

PRODUCT FEATURES Preferred choice for intubated patients Rugged, solid state with no moving parts. Lightweight and compact design Fast, accurate on airway measurement. No calibration required

Lightweight. Rugged. Reliable.Respironics Capnostat 5 Mainstream EtCO2 module VQ5582-9500-M

Respironics Mainstream Neonatal/Paediatric Airway adapter (for use with ET Tubes 4mm or less) VQ5593-CAP ea

Respironics Mainstream Paediatric/Adult Airway adapter (for use with ET Tubes 4mm or greater) VQ5593-CAA ea

Respironics LoFlo Sidestream CO2 sensor

PRODUCT FEATURES Ideal for intubated patients Proprietary sample cell protects internal NDIR components

from contamination Common connector allows easy exchange between

mainstream and sidestream monitoring Robust and long life pump reduces periodic maintenance No calibration required

Respironics Lo Flo Sidestream, Paediatric/Adult Airway adapter circuit For use with ET Tubes 4mm or greater (6ml deadspace) VQ5593-SL ea

Respironics Lo Flo Sidestream, Infant/Neonatal Airway adapter circuit For use with ET Tubes 4mm or less (1ml deadspace) VQ5593-SLI ea

Respironics Sensor Cable Holding Clips VQ5593-C clip (pack of 5)

Respironics Lo Flo Sidestream Module Holder VQ5593-MB ea

Flexible. Compact. Durable.

Respironics Lo Flo Sidestream, EtCO2 module VQ5582-9500-S

Protective boot for Mainstream EtCO2 Module

VQ5593-P-MC

Easy to Use - Just connect Breathe Safe between the endotracheal tube and your anesthesia machine and you are set to go. At just 1.25 inches in diameter and 1 inch high, this unit is tiny. It is mounted on a convenient elbow adaptor and weighs only 1.4 ounces.Breathe Safe’s sophisticated analysis algorithm, will recognise and beep to indicate a breath from a 1 pound kitten or a 200 pound St. Bernard. If your patient fails to breathe for 30 seconds, Breathe Safe will sound a distinctive apnea alert for 15 seconds.

Auto Turn-On - Just attach to patient. The first breath will turn Breathe-Safe on automatically.

Auto Shut-Off - When patient is disconnected, Breathe-Safe will wait 30 seconds, then beep for 15 seconds before turning off. It’s best to put Breathe-Safe in a drawer or enclosed space so that moving room air will not trigger its sensitive circuitry.

Breathe Safe uses a high density long life lithium battery to provide up to 10 years of service, resulting in no battery changes and no maintenance.

VQ5495

12 month warranty

Breathe Safe III Anaesthetic Apnea Monitor

FEATURES High resolution 2.4” color LCD display Two selectable working modes: spot check and continuous monitoring Adjustable audible and visual alarms Real time data transfer by infrared technology Lithium Batteries to support up to 36 hour continuous working.

Supplied with Main Unit, Sensor, Charging stand and Power Cable, and Protective boot

VQ5563

Apalert RM5 - Veterinary Respiration Monitor

Replacement Components Replacement components for Apalert respiration monitors

VQ5501 Standard Sensor Tip Only VQ5504(a) Standard Sensor Tip and Cable VQ3597 Endo Tube Swivel Connector VQ5506 Apalert Charger

Apalert RM5 respiration monitor is robust and reliable with sensitivity adjustable (down to 1kg patients) apnea period to trigger alarm, adjustable from 10 to 60 seconds.

VQ5500 Hands free alarm reset

Mindray PM-60Vet

MONITORING



FEATURES Measures EtCO2, respiration rate. About the size of a smartphone New, high definition, bright colour screen. Choose between mainstream or sidestream CO2 Diagnostic CO2 Audible/visual physiological and technical alarms User adjustable alarm limits Pre-set alarm limits for cats, dogs and horses. Three-hour graphical trend review Up to 99 patient Ids Power charger/cradle included

VetQuip Procap

The VetQuip Procap puts the ultimate “anaesthesia disaster early warning system” into the palm of your hand

MainstreamSensor

SidestreamSensorVQ5593-NT1D-S

VQ5593-NT1D-M

Respironics cutting edge CO2 technology

Handheld capnography monitorThe VetQuip Procap is compact and portable, with a crisp high-definition colour screen and the choice between mainstream and sidestream CO2. It’s designed to provide immediate clinical feedback of actual expired CO2. The VetQuip Procap helps provide critical information during anaesthesia, such as anaesthetic depth, cardiac output and perfusion.

VQ5593-P-M VQ5593-P-S

MONITORING



Contact VetQuip now on 1300 888 427

Our experienced biomedical technicians, service and repair an extensive range of medical equipment including respiration monitors, fluid pumps, pulse oximeters, ECG machines and much more.

VetQuip’s commitment to quality and customer care is established

throughout all departments within the company. Professional, friendly

and helpful staff are always available to discuss your requirements and to

provide answers to your technical questions.

Multiparameter monitors

Fluid pumps

Pulse oximeters

ECG machines

Anaesthetic machines

Electrosurgical equipment

Diagnostic products

Orthopaedic equipment









Biomed Service Centre

MONITORING

FEATURES AND BENEFITS “Sleep Mode” easily configures system to perform bedside studies 2 second averaging in sleep mode “Home Mode” allows for safe and accurate monitoring and trending at home RadNet® and RadLink® interface capability for multi-patient remote monitoring Perfusion Index (PI) indicates arterial pulse signal strength and may be used as a diagnostic tool during low perfusion3 Low Signal IQ® (SIQ) indicator highlights conditions of low signal quality FastSat™ tracks rapid changes in arterial O2 with high fidelity unlike any other pulse oximeter APOD™ (Adaptive Probe Off Detection) offers the best probe off detection of Masimo’s three

sensitivity modes - APOD, Normal and MAX sensitivity. Adjustable averaging 2 to 16 seconds Nurse call interface Up to 7 hours of internal battery life when fully charged 72 hours of trending memory Available in horizontal and vertical configurations Compatible with Philips Vuelink device interface module

Bench Mount Mains Powered (with battery back up) Pulse Oximeter with Veterinary Y Sensor and Clip

VQ5585 (a)

The accuracy and reliability of Masimo SET pulse oximetry in a compact device, perfect for spot-check and triage. Masimo SET® technology is scientifically and clinically proven to provide accurate pulse oximetry measurements during motion and low perfusion. Lightweight, convenient handheld device, with a long battery life (over 30 hours on 4 x AA batteries). FastStart™ allows for rapid measurement at start-up. Perfusion Index (PI) indicates arterial pulse signal strength. Signal I.Q.® (SIQ) bar for signal identification and quality indication during motion and low signal to noise situations. Audible and visual alarms for Sensor Off & Low Battery. Optional protective boot cover with built in table-top stand (included).

FEATURES Signal I.Q.® (SIQ) bar is used for signal identification and quality indication during motion and

low signal to noise situations. The LED rises and falls with the pulse, its height indicating signal quality. When signal IQ is very low and the SpO2 and pulse rate values may be suspect, the LED turns red.

The Alarm Status Indicator flashes when an alarm condition is present Perfusion Index (PI) indicates arterial pulse signal strength. The LED bar is highest and green

when the quality of the perfused site is best. When PI is poor the LED bar is low and turns red.

Pulse Oximeter with Veterinary Y sensor and Clip

VQ5585-4(a)

Compact design. Unmatched clinical performance. Featuring Masimo SET® pulse oximetry, proven accurate during motion and low perfusion in more than 100 independent and objective studies. The accuracy of Masimo SET pulse oximetry has been shown to reduce false alarms by 95% without missing true clinical events. Simple, easy to use interface for quick setup and alarm management with one touch programming. Large LED color display is easy to read at a distance. Compact, lightweight design is ideal for acute and alternate care settings including long term care facilities, homecare and sleep labs.

Masimo Rad-8

Masimo Rad-5V



Masimo SpO2 Veterinary range now available from VetQuip.

Call 1300 888 427 for the full range of Masimo monitors.

VetQuip SpO2 probe “ Palco” with Vetclip/Y sensor VQ5568-1

VetQuip SpO2 probe Generic “Nellcor” (Oximax) Y sensor - 91cm VQ5568-5

Nellcor SpO2 probe “ Original” “Oximax” with Y sensor - 123cm VQ5568-7

Nellcor SpO2 probe “Datex” with Y sensor VQ5568-D

VetQuip SpO2 probe “Ohmeda” with Y Sensor VQ5568-O

Veterinary SpO2 ProbesVetQuip stock a complete range of replacement SpO2 probes and leads call 1300 888 427 for details

A full range of SpO2 monitor break out and connector cables are available

VetQuip SpO2 Prob “BCI” with Y Sensor VQ5568-BCI

VetQuip SpO2 Probe “Nonin” with Y Sensor VQ5568-N

VetQuip Extension Cable “Nellcor’ VQ5568-2

VetQuip Y Clip Only for SpO2 Generic probe “DYS” VQ5568-5Y

Nellcor Clip only (Large) for Original (Oximax) SPO2 SensorVQ5568-7YL

Nellcor Clip only (small) for Original (Oximax) SPO2 SensorVQ5568-7YS

VQ5568-7

VQ5568-7Y

VQ5568-5Y

MONITORING



Contact 1300 888 427 for further details

VetQuip sell an extensive range of replacement invasive blood pressure leads and transducers, Sp02 leads, probes and clips.

VetQuip can custom build Sp02 probes to specific research needs.

Monitoring Accessories

VQ5568-5

MONITORING

FEATURES AND BENEFITS

Reliable Simple to use Accurate Silent, fast and portable

Looking for a reliable, simple and silent BP Monitor for cats and dogs? Look no further than the new SunTech Vet20.

The new portable SunTech Vet20 quickly and easily provides reliable BP measurements on awake companion animals, ensuring a simpler assessment process for veterinarians and their staff members.

Utilising SunTech’s trusted Advantage VET BP technology, the SunTech Vet20 quietly performs motion-tolerant, oscillometric BP measurements, delivering more accurate results with a greater success rate than other devices.

Users are able to get started using the device immediately as the intuitive touch screen interface includes all of the necessary features for reviewing and analysing BP data, yet little to no staff training is required. Alarms can be silenced to avoid frightening the animal and saved measurement data is always retained when the device is powered off.

SunTech Vet20

WHAT OUR USERS SAY

“We appreciate the ease of use that comes with the SunTech Vet20. It gives fast, reliable readings—without hassle—and this is important for our busy workflow. We don’t have time for error messages—we need results we can count on.”

Dr. Elisa Sumakeris DVM, CareFirst Animal Hospital Grace Park

“Much better than the other BP devices we use. Reads better than other BP devices on moving animals.”Olivia S. CST, CareFirst Animal Hospital Oberlin



Protective Boot now available

VQ5676

MONITORING



VQ5667-N(a) Petmap Plus - NIBP only VQ5667-N/S(a) Petmap Plus - NIBP/Sp02VQ5667-N1 Petmap Plus - Esophageal/Rectal Extension Cable VQ5667-N2 Petmap Plus - Esophageal Temp ProbeVQ5667-N3 Petmap Plus - Rectal Temp probeVQ5667-N4 Petmap Plus - Sp02 sensor VQ5667-N5 Petmap Plus - Pole MountVQ5667-N6 Petmap Plus - International Adapter PlugVQ5667-N7 Petmap Plus - Mains ChargerVQ5667-N8 Petmap Plus - Small NIBP Extension HoseVQ5667-N9 Petmap Plus - Large NIBP Extension HoseVQ5667-NC Petmap Plus - Monitor Impact Cover

FEATURES Proven petMAP technology with PPO (PetMAP Proprietary Optimisations) 02 saturation with pleth display Temperature monitor using standard probe Easy to use “no menu” touch screen display Real-time display of oscillometric “envelope” Selectable BP cycle times in OR mode Tabular display of readings and NSV in clinic Graphic display of last 45 readings in OR SO memory card records all BP/02/temp readings Built in NiMH batteries and wall charger Optional pole or table mount

SPECIFICATIONS Blood Pressure Range: 30 -260 mmHg Heart Rate Range: 40 -240 bpm (both BP and Sp02) Sp02 accuracy claims: +/- 3% v. (Bio-Tech Index2 Sp02 simulator) Temp accuracy claims: +/- .2° C (in physiologic range) Dimensions: 6.0”H x 3.2”W x 1.25”0 Weight: 16.4 oz (with NiMH batteries) Battery: Std: NiMH four AA, optional: alkaline Weight: 0.17kg

PetMAP+Exam room and OR BP/Sp02/TEMP monitoring with one handheld device. Comes with cover, cuffs and extension leads.

supplied with

patient cover, cuffs

& extension hoses

PetMAP’s latest handheld monitoring device

and availability

petMAP graphic II is a small lightweight & portable blood pressure measurement device designed for vet use. It is capable of measuring blood pressure (systolic, diastolic & mean arterial pressures) & heart rate. The measured values are displayed & trended graphically & numerically on the device. Data trended on the petMAP gII can optionally be saved on an SD memory card via the devices integrated SD memory card slot.

A user interacts with petMAP gII using its touch screen, just like many smart phones. The user can set alarms for systolic blood pressure & can set a BP cycle time for automatic reminders to start another BP measurement.

PETMAP GRAPHIC II PROVIDES: Proven petMAP technology with PPO (petMAP Proprietary Optimization)

Species & cuff site settings to improve accuracy Easy to use “no menu” touch screen display Real-time display of ocillometric “envelope” Selectable BP cycle times for measurement reminders Tabular display of readings Graphic display of last 45 readings & NSV SD memory card to recall all BP/HR values & “power off” image Optional pole mount, cover & AC adaptor

SPECIFICATIONS Blood pressure range:

Systolic 40-265mmHg MAP 30-200 mmHg Diastolic 25-195 mmHg

Heart rate range: 40 -240 BPM Power: 4 x Alkaline (Installed) Dimensions: (5.9” H x 3.1” W x 1.2” D) Weight: 453 grams (including Batteries)

The next generation petMAP graphic for allyour BP/HR measurement needs.

MONITORING

VQ5667-G2(a)

petMAP Graphic II

VQ5667-N5 Petmap - Pole Mount

VQ5667-NC Petmap - Monitor Impact Cover



PetMAP Graphic II

Optional Accessories

MONITORING



PetMAP Blood Pressure CritterCuffs

PetMAP Blood Pressure Ramsey Cuffs

Vet-Dop 2 Doppler Blood Pressure System

*Seven selected sizes included with PetMAPTM

The Vet-Dop2 is an updated version of the original and proven Vet-Dop, with rechargeable battery in a smaller, lighter package. Vet-Dop2 is designed for veterinarians to listen to arterial and venous blood flow sounds in small animals. When used with a sphygmomanometer and an animal blood pressure cuff of the correct size, systolic blood pressure can be determined. The Vet-Dop2 works well on all small animals, including exotics.

The Vet-Dop combines state of the art microelectronics with a sensitive, focussed transducer, to produce a user-friendly doppler designed especially for veterinary applications.

Maximum sensitivity and low background noise reduce the time required to perform routine blood pressure measurements and ensure accurate results every time. Initial and on-going staff training, is always available with the video DVD included.

VQ5668-2* 2.0cm VQ5668-2.5* 2.5cm VQ5668-3* 3.0cm VQ5668-3.5* 3.5cm VQ5668-4* 4.0cm

VQ5668-10 10.0cm VQ5668-13 13.0cm

The Doppler preferred by experts Durable ultrasound transducer Minimal background noise Battery life over 50 hours One year parts and labour warranty

KEY FEATURES Easy to use Advanced, low noise microelectronics. Durable, focussed transducer. One year parts and labour warranty

INCLUDED ACCESSORIES Certified sphygmomanometer Set of five animal cuffs, with size gauge. Stereo audio headphones Ultrasound gel Hypertension and doppler application DVD Padded storage pouch

VQ5660(a)

VQ5668-4.5* 4.5cm VQ5668-5.5* 5.5cm VQ5668-6.5 6.5cm VQ5668-8 8cm

*Included in PetMAP System

The preferred modality for the awake animal

CM300 3 Channel ECG FEATURES

High resolution LCD screen 320 x 240, vivid waveform display 12 leads ECG simultaneous acquisition Built-in high resolution thermal paper LED status indicator Complete digital filtering, resisting baseline drift. Automatic ECG measurement and interpretation 3 printing modes (auto, manual and rhythm) selectable 1/2/3 channel ECG waveform and rhythm leads record out 150 ECG’s in internal memory Optional network capability Data import/output via USB

PHYSICAL SPECIFICATIONS Weight: 3.0kg Dimension: 320mm x 275mm x 66mm

Light weight and portable

VQ5595-CM300 CM300 3 Channel ECG VQ5595-CM300-P Paper (per roll)

MONITORING

ContigelContigel is a highly conductive gel for use during ECG recording to aid in conducting the ECG waveform, this high quality highly conductive gel is applied to the patient electrode, it is also water soluble, neutral pH and easy to clean up after.

Use Contigel to take the hassle out of ECG recording.

VQ5595-GEL

NEED PLANT & EQUIPMENT FINANCE?

TM

in

Whether you are setting up a new business, plan to expand or update your existing one, a Morris Finance New Business Specialists will devise a customised plan to meet your needs.




VetQuip offer the full range of Welch Allyn veterinary products. Our biomedical service centre also carries a full range of spare parts.For all your Welch Allyn service requirements call 1300 888 427

W/A Digital MacroView Veterinary OtoscopeThe Welch Allyn Digital MacroView Veterinary Otoscope is a simple, affordable tool that lets you see, explain and save digital images of the ear. Offering you clear, live and still images of the ear canal and tympanic membrane, the Digital MacroView Veterinary Otoscope is a valuable tool for the treatment and management of your patients’ ears. Easy to learn and use, the Digital MacroView is a plug and play system requiring no additional software puchases.

W23960

Get a wider, deeper, clearer view of the ear with, a MacroView. Using advanced technology in an innovative design the MacroView veterinary otoscope gives you large, sharp, nearly full view of the tympanic membrane, even in large dogs. An easy to focus eyepiece, enables you to get crystal clear views of the ear canal at any point.

Approximately 27% greater magnification than with traditional otoscopes Approximately 35% greater field of view than with traditional otoscopes True grip for secure fastening of ear specula and an ejection feature for easy removal Built-in throat illuminator MacroView attaches to any Welch Allyn 3.5v power source (supplied separately) Supplied with 4mm, 5mm and 7mm specula, with improved taper for deep ear viewing.

W23862 More detail and better clarity with MacroView

W/A MacroView Otoscope

WELCH ALLYN



W/A Diagnostic Set Operating3.5v operating otoscope head with 3 polypropylene specula, sizes 4, 5 and 7mm. 3.5v coaxial ophthalmoscope head and rechargeable handle in a hard case. Charger included.W96276-V

W/A Diagnostic Set Pneumatic3.5v pneumatic otoscope head with 3 polypropylene specula, sizes 4, 5 and 7mm. 3.5v coaxial ophthalmoscope head and rechargeable handle in a hard case. Charger included.W96226-V

W/A Pneumatic Otoscope Head3.5v pneumatic otoscope head, with 3 polypropylene specula, sizes 4, 5 and 7mm.W20260

W/A Operating Otoscope Head3.5v operating otoscope head, with 3 polypropylene specula, sizes 4, 5 and 7mm.W21760 Open system for convenience during procedures

W/A Standard Ophthalmoscope Head3.5v standard ophthalmoscope head,

6 apertures for general and specialist use. 28 lenses - 25 to +40 diopters for better resolution.

W11710

W/A Coaxial Ophthalmoscope Head3.5v coaxial ophthalmoscope head includes all the features of the standard head with 30% more light output, shadow free spot,

crossed linear polarising filter and 18 possible aperture combinations.

W11720

Coaxial Opthalmascope with LED GlobeW11720-L

W/A PanOptic OphthalmoscopePanOptic ophthalmoscope head with 3 spot sizes: micro, small and large with add-on magnifying lens.W11820

W/A PanOptic Patient Eye CupsPack of 5 reusable eye cups W11870

W/A PanOptic with LED globeW11820-L

Compatible with W/A 3.5v handles

WELCH ALLYN



W/A Dual Desk Charger SetDual desk charger stand with two standard rechargeable handles and transformerW71716 Does not include heads

Contact VetQuip now on 1300 888 427

VetQuip is an authorised Welch Allyn service centre. Our experienced biomedical technicians can service and repair an extensive range of Welch Allyn medical equipment.

Welch Allyn Service

W/A Lithium-ion HandleReplacement 3.5v lithium-ion complete handleW71910

W/A Lithium-ion BatteryReplacement 3.5v lithium-ion battery onlyW71960

W/A Lithium-ion HeadReplacement 3.5v lithium-ion handle head onlyW719005-503

W/A Lithium-ion Set3.5v lithium-ion power handle features ‘smarter’ lithium-ion battery technology. The lithium-ion handle powers any 3.5v instrument head for 100 minutes, twice as long as the conventional handles.W71906

Supplied with charging stand and transformer

W/A Lithium-ion Dual Desk Charger SetDual desk charger stand with two lithium-ion handles and transformerW71736 Does not include heads

W/A Dual Charging StandDouble charging stand, for 3.5v standard rechargeable handle and lithium-ion power handle.W71146

W/A Single Charging StandSingle charging stand, for 3.5v lithium-ion power handle only.W71946

WELCH ALLYN



W/A Standard 3.5v HandleReplacement rechargeable handle for use with desk chargersW71670 Supplied complete with battery

W/A Professional PenLiteHalogen penlite, for true tissue colour and long lasting illumination.W76600 Uses standard AA batteries

W/A Indirect Viewing Lens20 diopter all-glass, indirect convex viewing lens, allows for less distortion and provides a larger field of view of the fundus.W12300

W/A Convertible Rechargeable HandleRechargeable handle for use with all 3.5v headsW71066-C Supplied complete with battery, transformer & battery converter allowing use of “C” size Alkaline batteries.

W/A Transformer/ChargerTransformer/charger for rechargeable handlesW71036

W/A Transilluminators 3.5v halogen transilluminators. Optional cobalt blue filter.

Cobalt Blue Filter W41102

Curved All Purpose W43300

Finnoff Ocular W41100

W/A Replacement Lamps

W02600-U W03000-U W03100-U WO3100-LED

W02600-U

W03400-U

W03000-U

W03800-U

W03100-U

W03900-U

W04700-U

W06500-U

W04800-U

W07600-U

W04900-U

W08500-U

W03400-U W03800-U W03900-U

W04700-U W04800-U W04900-U

W06500-U W07600-U W08500-U

WELCH ALLYN



W/A Rechargeable BatteriesNickel-cadmium battery for use with rechargeable handle

for use with: #71670, #71000, #71020. BlackW72200

for use with: #71000-A, #71202-A, # 71000-C, #71020-C. Orange.W72300

Other model batteries available on request

Call 1300 888 427 for assistance and pricing

VetQuip stock a full range of Welch Allyn LED lamps. You can now replace your standard halogen lamp with an LED lamp which has 30 x more lamp life, lasts 3 x longer on a fully charged battery handle and comes with a 7 year guarantee.

Welch Allyn LED Lamps

W/A TR-2 SphygmomanometerWelch Allyn TR-2 single lead aneroid sphygmomanometer. The trigger release air valve is positioned for optimal left or right handed use, and allows for easy fingertip control of cuff deflation, crucial for accurate measurements.

FEATURES Large easy to read dial face Trigger deflation valve for smooth one finger control Balanced palm design for comfortable use, over repeated measurements.

W/A BP CuffsWelch Allyn single lead blood pressure cuffs. Secure velcro fastening.W5082-1(a) #1 3.3-5.6cm range W5082-2(a) #2 4.2-7.1cm range W5082-3(a) #3 5.4-9.1cm range W5082-4(a) #4 6.9-11.7cm range W5082-5(a) #5 8.9-15cm range

W/A Polypropylene Specula Specula for use with pneumatic and operating otoscopes, able to be autoclaved and cleaned with standard germicides.W22002 2mm W22003 3mm W22064 4mm

Specula sizes listed are the internal diameter

W22065 5mm W22067 7mm W22069 9mm

2mm 3mm 4mm 5mm 7mm 9mm

Smooth trigger release

W5098-27

STETHOSCOPES

The Harvey Elite offers updated styling along with the superior comfort and auscultation capabilities that cardiologists have come to rely on. It is equipped with dual-bore, latex-free tubing, that creates two uninterrupted sound channels and works with the optimally weighted, rugged and stainless steel chest pieces. In addition, the Elite’s diaphragm is designed to accentuate important sounds - all this enables you to hear cardiac, pulmonary and vascular sounds.

Harvey™ Elite® Stethoscope

W5079-125 Black W5079-270 Burgundy W5079-271 Navy

Full-range cardiology/pulmonology stethoscope Double-head (bell and flat diaphragm) stainless steel chest piece with nonchill rim Pediatric chest pieces available Rotatable stainless steel binaurals and interchangeable comfort sealing ear tips Triple-leaf binaural spring encased in polyurethane

allows size adjustment while preventing breakage Choice of tubing length Latex free 10-year warranty

The professional Stethoscope is for the user who demands the best in auscultation and comfort. The Professional’s superior acoustics, mean accurate auscultation of heart, lung and blood pressure sounds.

Stainless steel double-head (bell and flat diaphragm) chest piece with nonchill rim Rotatable in binaurals and interchangeable comfort sealing ear tips Latex-free 5-year warranty

W5079-135 Black W5079-137 Navy W5079-139 Burgundy

Welch Allyn Professional Stethoscope

Replacement Stethoscope Ear PiecesW5079-366 (soft black)



www.vetquip.com.aufor detailed product information, specials and to view the complete range of products

VetQuip Online

Replacement Stethoscope Ear PiecesW5079-366 (soft black)

MILA International is an innovative company which has developed veterinary medical products otherwise commercially unavailable.The MILA range offers specific products for both equine and small animal.For all your MILA requirements call 1300 888 427

MILA Product Range

MilacathExtended use, kink resistant polyurethane catheter. Indwelling duration up to 21+ days. Catheter-over-needle for easy insertion.

M1211 12ga x 5.25” (13cm) M1403 14ga x 3.5” (9cm) M1411 14ga x 5.25” (13cm) M1603 16ga x 3.0” (7.5cm) M1611 16ga x 5.25” (13cm) M1811 18ga x 2.5”(6.25cm) M2011 20ga x 2.5” (6.25cm)

Long Term Catheter

Short Term Catheters Teflon catheter over needleM1006 10ga Short Term Catheter M1212 12ga Short Term Catheter M1402 14Ga Short Term Catheter

Long Term CatheterNon-reactive Polyurethane, can be left indwelling for 3-4 weeks. Used for pressure monitoring, blood sampling and administration of drugs or fluids. Normally closed valve, helps prevent loss of catheter due to accidental disconnection. Antimicrobial catheters, are coated on both internal and external surfaces, with silver sulfadiazine, for the immune suppressed patient. Silver Sulfadiazine coating provides a precautionary protective enhancement.

Double Lumen M1500 Milacath l/term D/Lumen M1600 MilaCath L/Term D/Lumen 5Fg M1620 MilaCath L/Term D/Lumen 7Fg M1630 MilaCath L/Term D/Lumen 7Fg M1640 MilaCath L/Term D/Lumen 5Fg

Triple Lumen M1700 Triple Lumen Cath Kit 5.5F x M1720 Triple Lumen Cath Kit 7F x 15 M1760 Triple Lumen Cath Kit 7F x 60 M8095 Safety Inj Cap -Needleless

M1006

M1402



Extension TubesExtension tubes, feature bi-directional valve for infusion and sampling, small bore or high flow tubing, double or single T sets with swivel luer lock.

High Flow T Extension SetM8572 13ga x 17.8cm

High Flow Extension SetM8590 13ga x 17.8cm

Small Bore T SetM8570 30ga x 17.8cm

Small Bore Extension SetM8585 16ga x 17.8cm

Eye Lavage KitSubpalpebral Eye Lavage Kit allows application of eye medication, away from the site. Single stick insertion method with soft non-irritating disc and tubing. Set includes luer lock adapter and suture devices. Use with the Elastometric Admin Pump, Balloon Infusor, or Infu-DiskTM for continuous infusion. 12ga trocar, 36” catheter.

M6612

Joint Infusion KitProvides continuous localised infusion of antibiotics directly into the affected joint. 100ml administration pump (0.85ml/hr), crush resistant indwelling catheter, peel away introducer 6fg x 2.5” (6.25cm).

M9100

Easily slides onto any size of tube or tubingM175490CLP

Tubing Clamp

Tethered cap attaches to the catheter, or extension hub, to cover the injection site.

M8090 Each

Tethered Cap

M8080 Each

Injection Cap



MILA For MILA product information please phone our sales and support line on 1300 888 427

MILA



Blood Collection SetHigh flow collection set that attaches directly to venous catheter. Set includes 6ft tubing, injection site, drip chamber and swivel luer lock. M175484 High flow tubing

Trans - Tracheal Wash KitCatheter-over-needle insertion method. The semi-rigid flushing catheter has a stylet and luer adapter.

10ga Introducer, 12ga Flushing CatheterMTW1228 12ga x 28” (70cm)

14ga Introducer, 16ga Flushing CatheterMTW1628 16ga x 28” (70cm) Suitable for large dogs and neonate foals

Endoscopic Aspiration Catheter2 and 3 stage sampling catheter enabling sterile specimen retrieval via endoscope

High Flow Fluid Transfer SetIdeal for uterine flush. Includes high flow spike, high flow tubing, clamp and graduated adaptor for 20-40fg tubes. 30cm in length.M175490 High flow tubing

Lance-A-LotAspiration and injection needle. 17ga, with female luer lock. Ideal for lancing and injecting ethmoid haemotomas and uterine cysts. 2.5mm x 190cm.MLAN190

Guttural Pouch Catheter KitNon-irritating polyurethane catheter for extended treatment of the guttural pouch. Kit includes polyurethane catheter with coils, bendable introducer and attachable luer lock adapter.M9500 Catheter kit 12ga x 135cm M9510 Catheter only M9520 Introducer only

Endoscopic Delivery CatheterSingle lumen catheter, with female luer lock adaptor for medication delivery and sampling at any endoscope accessible site.

MEDC190 2.5mm x 190cm

MEMAC800 2.5mm x 190cm MEMAC700 2.0mm x 190cm MEMAC700L 2.0mm x 250cm

MEMAC700

MILA



MFCT4

Balloon Infusor30ml balloon infusor. Use with MVB101.MVB101

Broncho-Alveolar Lavage Catheter (BAL)Open end silicone fluid administration catheter for the lavage of selected segments of the lung fields. Distal balloon can be inflated to prevent retrograde fluid flow. 50cc balloon volume. Proximal two-way fitting allows simultaneous connection for both irrigation and aspiration.

P.E.G. Kit - Percutaneous Endoscopic Gastrostomy KitRadiopaque polyurethane material is non-irritating. Collapsible bumper to facilitate insertion and removal. Right angle fixation device that holds tube securely. Kit includes introduction needle, guidewire, 36 inch peg tube, right angle fixation device, and Y-adapter.

Fluid/Blood Delivery Set 6ft tubing, drip chamber with filter, pressure vent, injection site, swivel luer lock.M175496

EquiSet Fastflow Large bore, non-vented Y-set with luer lock adaptors. 30fg x 300cm.M8V0002

Clear Cuff Pressure Infusor High performance pressure infusor. Provides easy view of fluid bag and fluid level. Special built-in hook allows fluid bag to be replaced without removing pressure infusor from hanging device.M175500 Clear Cuff Press Inf Bag 1000ml

M7100 Supplied with Flow Control Tube with Y port

Flow Control TubeUse with balloon infusor MVB101MFCT2 10ml/2 hour MFCT4 10ml/4 hour

MBAL240 Broncho Alveolar Lavage Catheter

MPEG16 16fr PEG Kit

MPEG20 20fr PEG Kit

Fluid Collect, Delivery & Drain Systems Elastometric Admin Pump4 layer balloon pump. 100ml capacity, delivers 0.5ml/hr.

M175500

MPEG16

MILA



Chest Tube – Guidewire InsertionSingle lumen polyurethane catheter can be used for drainage of pyothorax, hemothorax, pneumothorax and peritoneal lavage. Insertion is using the catheter over guidewire technique. Normally closed valve with luer adapters prevents air from entering chest. Additional suture wing for secure adjustment and attachment, multiple drainage holes. 14Ga x 20cm (8in).MCT1410

Esophagostomy Feeding TubesME1413 Feline feeding tube – 14Fr adjustable to 13in ME1430 Canine Feeding Tube 14Fr adjustable to 30in ME1450 Small Animal Feeding Tube – 14Fr adjustable to 50in ME1830 Small Animal Feeding Tube - 18Fr adjustable to 30in

Chest Tube Adapter with Stopcock Assembled to include a three-way stopcock, clamp, and graduated Christmas tree adapter for various tubes.M175420 Chest Tube Drain Adaptor 16Fr x 25cm (10in) M175425 Chest Tube Drain Adaptor 20Fr x 25cm (10in)

Centesis Valve/Chest Tube Adapter Unique valve allows aspiration and evacuation with a syringe. Luer lock adapter for needles and christmas tree adapter for 18-35Fr chest tubes. NO STOPCOCK NEEDED!!M175450 Centesis Valve Drain Adapter 12.5cm (5in) M175460 Centesis Valve Drain Adapter 40cm (16in) M175470 Centesis Valve Drain Adapter with In-Line Injection site

Small Animal/Tomcat CatheterNon-irritating polyurethane material that is rigid for easy insertion. Softens indwelling, finished tip, luer lock and moveable suture wing to allow length adjustment.MUC306 3.5Fr x adjustable to 15cm MUC506 5Fr x adjustable to 15cm

Heimlich ValveOne way valve with barbed adaptersMH2900 Heimlich Valve

Nasogastric Feeding TubeMarked non-irritating radiopaque polyurethane with stylet. Y adaptor for feeding, medication and flushing. 14Fr and 18Fr are length adjustable. 14Fr and 18Fr include nose piece with suture grooves.

MNG843MNG522S 5fg MNG636 6fg MNG622 6fr x 55cm MNG843 8f x 108cm MNG855 8Fr x 5.5”

MNG1036 10fg x 90cm MNG1036W 10Fgx 90cm Weighted MNG1243 12fg x 108cm MNG1450 14fr x 125cm MNG18100 18fr x 250cm

ME1430

M175420

M175460



MILA

Foley CathetersRadiopaque silicone foley catheter with balloon cuff and wire stylet.

MUC624 6Fr x (60cm) 2cc balloon MUC636 6Fr x (90cm) 2cc balloon MUC836 8Fr x (93cm) 2cc balloon MUC1018 10Fr x (18cm) MUC1036 10Fr x (93cm) MUC1221 12Fr x 55cm MUC149 14fg x 23cm MUC1621 16Fr x (55cm) MUC2459 24Fr x (150cm) Smaller sizes available

Collection Bag1000cc collection bag with female luer lock and twist drainMUC1000

Diffusion/wound CatheterFor delivery of pain medication or antibiotics directly to a wound. 16ga x 30cm polyurethane catheter with micro ports in the distal end to evenly disperse fluid over 4 inches, 6 inches, or 9 inches.

Can be placed directly into wound site or using a peel-away introducer.

Use with MILA administration pumps, a syringe, mini pump, or IV pump for continuous infusion from 0.5ml/hr to 5.0ml/hr.

MDIFF4 Diffusion/Wound Catheter 4” (10cm)

MDIFF6 Diffusion/Wound Catheter 6” (15cm)

MDIFF7 Diffusion/Wound Catheter 7.5” (19cm)

MDIFF9 Diffusion/Wound Catheter 9” (22.5cm)

The new Long Line Kit, is an improvement to the IntraCath/VenoCath set. The polyurethane catheter material, makes this catheter durable and suitable for extended use. The new Long Line Kit is safer, as total removal of the introducer eliminates needle guard. Catheter can be customised for each patient, by cutting to the needed length. Secure female luer lock is placed onto catheter after insertion into vessel. The moveable wing provides a method for secure attachment to patient. Kit includes adjustable catheter, introducer needle, introducer catheter-over-needle, moveable suture wing, and female luer lock adapter.

MLL1990 19ga x adjustable to 90cm

MLL1945 19ga x adjustable to 45cm

Long Line Kit

Fluid Control DialFrom 10ml/hr up to 250ml/hrM175480

3-Way Stopcock3-way high flow stopcockM2400 3-Way Stopcock (10pkt)

0.2 Micron FilterWith male and female luer lockM2420 0.2 Micron Filter (10pkt)



Double Christmas Tree Style ConnectorDual End 4-12mm

M2300 Double Christmas Tree Style Connector (10pkt)

Christmas Tree with Female Luer ConnectorAdapter accepts 20-40Fr catheter

M2350 Christmas Tree Female Luer (10pkt)

Jejunostomy TubesMust be placed through either a 16Fr or 20Fr PEG tube. Continuous nutritional support, via a Jejunostomy Tube, positioned in duodenum or jejunum. Tube can be placed by fluoroscopy or endoscopy. Silicone plug and capped stylet, prevents the escape of air during placement. Sealed twoomey adapter permits evacuation of stomach, from side port and placement of J-tube through top port.MJ1036 10FGx36in MJ636 Tube 6FGx36in MJ836 Tube 8FGx36in

Mila Grenade Continuous Suction BulbLow pressure design, provides continuous gentle suction and minimises tissue trauma. Volume marking, provides easy measurement. Non-reflux valve. Flat bottom design, for easy positioning and clip for secure attachment.

MG200 200cc

MG200

MG100 100cc

Two options – Introducer, drain, and adapter or introducer, drain, adapter and 100cc suction bulb. 90cm (36in) round silicone material. Radiopaque line. Multiple perforations over 25cm (10in) of distal end.

Multipurpose Drains

MDK1090

MDK1090 Drain Kit 10FG

MDK890 Drain Kit 8fg

M9203 20g Cath

M9206 20g Cath

Mila Pain Management KitPain management kit. Kits include catheter, tuohy introducer, introducer needle, loss of resistance syringe, filter, luer lock catheter clamp, suture wing, blade, and drape.

MILA

Pigtail Self-Retaining Drainage Catheter (Bonanno Type)Direct puncture drainage catheterKit includes blade, needle assembly, pigtail catheter, drainage adapter tube, suture wing and tethered cap.

MPT12 12g MPT14 14g

DIAGNOSTICS/CONSUMABLES

At Vetquip we are constantly being asked technical questions for all equipment and microscopes are one of the common subjects, in answer to the question above the answer is Yes and in response to the Veterinary community requests we have decided to release 2 new microscopes.

The iScope is our premium microscope with a Rackless stage, Kohler LED Illumination and top of the range E-Plan objectives offering you crisp viewing, The B-Series is an everyday workhorse with semi-plan objectives, both have a 5 year limited warranty.

All Euromex microscopes can be specially ordered with an optional PID control heated stage for reproduction use.Euromex is exclusively distributed through Vetquip, for any microscope repairs please contact VetQuip on 1300 88 427 for your service needs.

ObjectivesMost common microscope objectives come in three different types: achromatic, semi plan and plan.

Achromatic objectives

Semi plan objectives

Plan objectives

Microscopes, is there a difference?



SPECIFICATIONS: Eyepiece: Wide field WF10X (18mm)Objective: Achromatic 4 X/0.10 Achromatic 10 X/0.25 Achromatic 40 X/0.65 (spring) Achromatic 100 X/1.25 (spring, oil)Nosepiece: Quadruple (backward ball bearing inner locating)Stage: Double layer mechanical (Size: 125mm X 115mm, Move range: 70mm X 30mm)

Binocular MicroscopeQuality electric illuminated research binocular microscope with micrometer adjustable stage. Mains powered.

VQ5599

Supplied with 100 x oil immersion lense

Usually contain a pair of lenses and correct for colour and have a flat field correction for above 65% of the image. If there are aberrations they occur in the outer 35% of the image.

Contain three or more (achromatic) lens elements and have an 80% flat field. Semi plan objectives have an improved resolution.

Correct even better for colour and spherical aberration than semi plan objectives. Plan objectives have a 95% flat field and produce the best image quality.

Vetquip Stock replacement lenses and objectives for all Microscopes.Please call for pricing.



SPECIFICATIONS: Eyepieces: EWF10x/22 mmObjective: Plan PLi 4x/0.10, 10x/0.25, S40x/0.65, S100x/1.25 oil-immersion DIN IOS objectives. All optical parts are anti-fungus treatedNosepiece: Revolving quintuple reversed nosepiece on ball bearingsStage: 216 mm x 150 mm rackless stage equipped with integrated 79 x 52 mm mechanical stageHead: Trinocular with Siedentopf 30° inclined tubes. Interpupillary distance 47-76 mm with diopter adjustment on both eyepieces (Video Scope Ready)Stand: Heavy alloy stand is enameled with a stove-hardened off-white and black lacquer. Focus control by means of coaxial coarse and fine adjustment knobs; fine adjustment knob is graduated for 0.002 mm per intervalCondenser: In height adjustable Abbe N.A. 1.25 condenser with opening for optional slidersFocusing adjustment:iCare Sensor: The unique iCare Sensor is developed to avoid unnecessary loss of energy. The illumination of the microscope automatically switches off when the microscopist steps away from his positionCSS - Cable Storage System: Illumination & Power Supply:

Packing: Delivered with power cord, 500 mA 250V spare fuse and dust cover

SPECIFICATIONS: Eyepiece: DIN widefield eyepieces WF10x/18Objective: Semi-plan achromatic DIN-objectives SMP 4x

N.A.0.10, SMP 10x N.A.0.25,SMP S40x N.A.0.65 and SMP S100x N.A.1.25, oil-immersion. The 40x and 100x objectives are spring-mounted. All optical parts are coated

Nosepiece: Revolving inward facing nosepiece, ball-bearing mechanism, for 4 objectivesStage: Large mechanical stage, 120 x 135 mm, ball-bearing mechanism, with X and Y adjustment 75 x 35 mm. Double nonius, readable in 0.1 mm. Detachable slide holderTube: Binocular head with 30° inclined tube, fully rotatable over 360°. Tube length 160 mm. Interpupillary distance adjustable between 55 and 75 mm. One eyepiece with diopter AdjustmentStand: Heavy alloy stand is enameled with a stove-hardened off-white and black lacquer. Focus control by means of coaxial coarse and fine adjustment knobs; fine adjustment knob is graduated for 0.002 mm per intervalCondenser: Abbe condenser N.A. 1.25 in centrable holder, with iris diaphragm and filterholder with neutral filter and blue filter. Vertical adjustment by means of control knobIllumination: Built-in halogen 6 volt 20 watt illuminator with neutral filter. Light intensity adjustable with thyristor control. Built-in 110 volt or 220 volt transformerPacking: Packed with manual, dust cover, power cord, filters, 5ml immersion oil for S100x objective and allen wrench. Packed in styrofoam case.

Euromex iScope

Novex B-series

CMEX 3


3.0 Mpix CMOS color USB 2.0 camera 1/2” sensor, 2048 x 1538 pixels ADC 10 bits, color depth 24 bits

Diascopic intensity adjustable 3W NeoLED™ Köhler illumination with internal 100-240V power supply

The Cable Storage System of the iScope allows the user to practically insert the power cable into the backside of the instrument, which enables easy storage

Coaxial coarse and fine adjustments, 2 µm precision, 20 mm travel range. Rack-stop for protection of slides and objectives. Friction adjustment

VQ5597-ISCOPE

Video ScopeReady

A leading European microscope manufacturers since 1966 and all microscopes have a 5 year warranty.

Low signal/noise ratio USB 2.0 interface

VQ5597-CAM

VQ5597-NOVEXB

The attractively priced Novex B series microscopes are high quality, robust biological microscopes for educational purposes and scientific research




Blood Separation Prepared microtubes are quick and easy to use – quality serum or plasma from up to 1.3 mL of whole blood with a spin time of only 30-90 seconds. Exclusive PlasmaRotor produces gel-separated plasma from 3 mL of blood in two minutes.

Urine Sediment Unique micro-method correlates with standard procedure. Only 1.5 mL of urine needed; precalibrated conical tube with flip cap makes filling and decanting easy. 45 second spin time.

Microhematocrits Whisper-quiet, two-minute spin, for 12 tubes at a time. Choose glass, or easy to read SafeCrit plastic tubes, plain or heparinised. Inexpensive hand-held reader or illuminating digital reading station available.

StatSpin® VT Multipurpose Veterinary CentrifugeBlood, urine, hematocrits and other routine spins in two minutes or less. Here’s the one centrifuge system that’s designed specifically for the in clinic testing needs, of today’s veterinarian.

FAST - Separates in a fraction of the time required by other centrifuges quality serum or plasma in 30-90 seconds!

QUIET - Operates without vibration and with virtually no noise or heat build-up.

VERSATILE - Instantly adaptable to blood separations, urine sediments, microhematocrits and other routine applications.

SAFE - Cover interlock system, UL Listed (US/Canada), meets international safety standards.

EASY TO USE - Self-diagnostics reduce chance of operator error.

ECONOMICAL - Priced right, for the in-practice lab … pays for itself quickly.

SPECIFICATIONSCycle select Quick spin: 30 seconds (15,800 rpm) Normal: 90 seconds (15,800 rpm) Hard spin: 150 seconds (15,800 rpm) Urine sediment: 45 seconds (9,800 rpm) Microhematocrit: 120 seconds (15,800 rpm)Max. speed 15,800 rpmMax force 13,700 xgAccel time Approximately 6 secondsDecel time Less than 15 secondsRegulatory UL, cUL and CE markedWarranty 1 YearPower 100 to 240V, 50/60HzDimensions 15.2 x 16.8 x 21.8cm (1.7kg)

Supplied with VQ5578-RT12 Tube Rotor

VQ5578




VQ5578-RH12-1

12-place Microhematocrit Rotor

Includes transparent screw-on lid (without circular reader)

RotorsLightweight, precision fabricated rotors are pre-balanced to ensure reliable high speed performance in the StatSpin VT. Critical tube balancing is not required – users need only “eyeball” samples for safe operation, saving both time and effort. Rotors simply snap into place and can be removed instantly, without tools.

VQ5578-RT12

2 x 1.5 mL Rotor

For prepared microtubes, urine tube and LipoClear tubes

VQ5578-RM02

2 x 0.8 mL Rotor

For BD Microtainers

VQ5578-RH12

12-place Microhematocrit Rotor

Includes transparent screw-on lid and circular tube reader

VQ5579-TU15 Precalibrated urine tube, 1.5 mL, 50/pk

VQ5579-HT9H Glass hct. tubes, heparin, 100/vial

VQ5579-HT9U Glass hct. tubes, untreated, 100/vial

VQ5579-HP8H SafeCrit® plastic hct. tubes, untreated, 100/vial

VQ5579-HS24 Sealant pads, single.

Supplies

Universal CentrifugeBrushless Motor, RoHS and Multi-voltage 100 – 240V

FEATURES User-friendly design with RoHS compliant. Universal multi-voltage available from 100V – 240V ERROR detection including rotor imbalance

detection and alarm Electronic interlocking lid safety device Versatile rotors for selection, interchangeable Automatic braking system at the end of run Emergency STOP Microprocessor-based control system Stainless steel interior chamber A transparent viewfinder on top to monitor the

rotor spinning Unless covered with lid, the motor can’t spin Ideal for PRP separation too

TECHNICAL SPECIFICATIONS Dimension: 320mm (l) x 410mm (w) x 330mm (h) Motor driving: Brushless Speed (rpm): 1000 - 15,000rpm adjustable

VQ5631-036H

Additional Rotors:

VQ5631-2 24 x .75mm 12000/14490 (max rpm/RCF)

VQ5631-3 24 x 1.5ml 7200/4640 (max rpm/RCF)

VQ5631-4 12 x 10ml or 15ml 5700/4180 (max rpm/RCF)

VQ5631-624 x 5ml5000/2865(max rpm/RCF)




Contact VetQuip on 1300 888 427

VetQuip are pleased to announce our new on-site Biomedical service and maintenance program. VetQuip have invested in brand new testing equipment which allows us to come to you, rather than you having to send your equipment into us - saving you time and the frustration of being without your equipment.

Every Veterinary Practice has a responsibility to its patients to make sure that the veterinary devices they use are fully maintained. This can save you money in unwanted breakdowns, extend the lifespan of your equipment, as well as ensuring you comply with Occupational Health & Safety Standards.

Computerised Autoclave Calibration Test & Service

Anaesthetic Machine Service and Leak Test

Fluid Pump Pressure, Flow Rate & Calibration Service

Electrical Safety Testing (Test & Tag)





On-site Biomedical Service

Centrifuge ConsumablesSafecrit Plastic Heparinised Capillary Tube 75mm x 100VQ5579-UH75

Safecrit Plastic Plain Capillary Tube 75mm x 100VQ5579-UP75

Haematrocrit ReaderVQ5631-1

VQ5631-1

Tono-Pen AVIA® VET™ Veterinary TonometerReichert introduces the new Tono-Pen AVIA VET. Designed with the veterinary care professional in-mind, the ergonomically designed Tono-Pen AVIA VET, does not require daily calibration, has a long life and is easy to replace the battery and can be used in any position. With over 40 breeds of dogs and cats possessing the predisposition to glaucoma, the Reichert Tono-Pen AVIA VET provides simplicity for monitoring this condition.

20 years of clinical knowledge went into the development of the AVIA VET Rapid, accurate and objective IOP measurement. Functions in any position Portable and extremely light weight Large, easy-to-read LCD display. Right or left handed operation Long life, lithium-ion battery. Durable carrying case, to protect your Tono-Pen, during out of office visits.

VQ5603

Tono-Pen Replacement AVIA BatteryVQ5603-4

Tono-Pen Tip Covers VQ5603-T 50pack



VetAssist Patient Warming and Cooling SystemOur NEW VetAssist system, circulates water via the flexible patient heating/cooling pad. Conductive temperature therapy, helps prevent hypothermia and heat loss during surgery.Postoperative recovery is improved, while patients are kept at an optimum temperature. The flexible design of the heating/cooling pads, allows the clinician to use the pads in surgical cradles, or positioners. Side wrapping patients in cages, is no problem. Robust construction ensures the pads can be used in all areas of the clinic, surgery, recovery, and cage areas. One touch operation, with a range of 8 – 42ºC with constant LED display of current patient temperature ensures your surgery and recoveries are effortless.

VetAssist Patient Warming/Cooling SystemSYSTEM INCLUDES

Digital controller with LED display 70cm x 100cm flexible patient

heating/cooling pad (reusable)

VQ7498

40cm x 60cm (Small Patient) Flexible Patient Heating/Cooling Pad (reusable)VQ7498-1

70cm x 100cm Flexible Patient Heating/Cooling Pad (reusable)VQ7498-2

Stainless Controller Stand with 5 Star Mobile BaseVQ7498-T (a)


Reichert Vet360-Chek Digital RefractometerAll-in-one dependable, automatic, digital, clinical refractometer for veterinary practice.

COMPACT, POWERFUL, DEPENDABLE, ACCURATEThe Reichert Vet360-Chek is a multi-scale clinical refractometer, specifically designed for veterinary use. Unlike other models, this refractometer was designed with multi-scales, developed using the appropriate chemistry data for large and small animals. Using digital technology, the measurements are accurate and precise.

FOUR MEASUREMENT SCALES CAN BE QUICKLY ACCESSED WITH THE SIMPLE PUSH OF A BUTTON:

Canine Urine Specific Gravity (USG) Feline Urine Specific Gravity (USG) Large Animal Urine Specific Gravity (USG) Serum protein concentration for all animals

REICHERT VET360-CHEK KEY FEATURES: 4 measurement scales All measurements are automatically temperature compensated which

produces accurate readings 5-digit, full view LCD screen Results displayed in seconds Over 10,000 measurements powered by 2 x AAA batteries Compact, fits in a pocket and provided with a detachable neck lanyard.

VQ5600-RD Reichert Vet360-Chek digital refractometer




Reichert Rhino VET360 RefractometerReichert’s Rhino VET360 Refractometer quickly and accurately determines urine specific gravity and protein concentration in plasma, serum and peritoneal fluid. The Rhino VET360 uses automatic temperature compensation to provide accurate readings regardless of ambient temperature. The unit automatically corrects all readings back to the standard reference temperature of 20°C, providing greater accuracy.

FEATURES Shockproof - constructed of Xenoy® polycarbonate materials and double cemented

glass optics, that make it an ultra rugged and impact resistant design. Water resistant and dust proof – IP67 rated. Leak-proof design eliminates the

possibility of condensation, or sample contamination on the optics. Automatic temperature compensation, provides accurate readings without

correction tables, or temperature measurement. Clear, precise scales. Test takes only seconds to complete Portable - no batteries or power cord required

VQ5600-R

Veterinary specific, water resistant, dustproof and shock resistant.

Refractometer Provides quick and accurate indication of vital fluid levels

TRIPLE SCALE READS: Urine specific gravity Total serum protein Refractive index

VQ5600 Triple scale with automatic temperature compensation (ATC)

Suction UnitThe SP30 suction pump is easy to use and clean, it features an ergonomic and compact design that permits access to the main functions and controls which are always clearly visible.

The vacuum regulation knob allows adjusting the values according to requirements. Supplied with 1 x disposable handle.

Suction TubeDisposable 3 mtr Suction Tube supplied sterileVQ7502T

Suction TipDisposable Yankauer Suction Tip supplied sterileVQ7502-D

Suction Pump JarReplacement Suction Pump SP30 jar 1Ltr

VQ7500-1

SPECIFICATIONS 2000cc graduated collection tank Safety valve to protect any possible overflow

of liquids from collection tank 5/16” nominal I.D large bore tubing

Quality Italian Made

VQ7500(a) Stainless suction handles available separately



Provides quick and accurate indication of vital fluid levels

Medipaw X Protective BootsThe Medipaw X has all the features of the original model except the bottom is a light and flexible yet durable rubberized cup sole for patients with long term splints, difficult gaits, and for those ambulating on difficult terrains.

FEATURES Facilitates compliance Results in fewer rewraps Reduced complications from wet bandages Saves resources Color-coded sizing Upper drawstring closure Adjustable elastic secure Velcro straps Waterproof/ breathable nylon shell Machine washable/ hang dry Seam-sealed Scuff guard Durable, non-skid rubber bottom

Extra Small VQ5383-XS 5cm x 10.8cm

Extra Small 2VQ5383-XS2 6.2cm x 13.5cm

ShortyVQ5383-SH 5.5cm x 6cm

Small VQ5383-S 10.8cm x 17.78cm

Medium VQ5383-M 19.05cm x 29.21cm

Large VQ5383-L 22.86cm x 45.18cm

Extra Large VQ5383-XL 26.67 x 58.52cm


VetQuip PetScan II

The PetScan II requires little space but has excellent performanceIt can read transponders of type FDX B (ISO standard), type FDX A (Destron, AVID, AEG), HDX (Texas Tiris) and EM4102.

Scanning distance: up to 20cm. To avoid any handwriting mistakes, when transmitting the identification number read by PetScan, two types of transmission are available.

Transmission via an RS 232-type wire link or radio transmission, using Bluetooth technology. This function is compatible with most PCs or PDAs having Bluetooth origin, or via a USB Bluetooth key.

Dimensions: L:155mm, W:80mm, thickness:33mm. Weight: 140g.

VQ5538




Codos ClippersRechargeable Codos clipper, model CP-6800, ideal to have on hand for minor trimming (0.8mm cut).

VQ3704

Supplied with blade, multi-length cutting attachments, oil and brush.

Not suitable for Grooming.

Replacement Blade0.8mm cut ceramic blade

VQ3705

Oscillating Electric Plaster Saw

Saw BladeReplacement Fein Saw Blade for oscillating plaster saw

VQ9405-1(a)

VetQuip Fein German manufactured Oscillating Electric Plaster Saw. Complete set consisting of 1 saw-blade and spanner.

VQ9405(a) Remove your fibreglass casts with ease

TruCut® Biopsy NeedleTruCut® Biopsy Needles are designed for manual capture of high quality tissue sample with minimal trauma to the patient.

FEATURES 20mm specimen notch Scalpel-sharp surgical steel cutting edge Removable stylet, allows multiple sampling. Thin-wall needle yields larger core sample Centimeter markings assist in needle placement

High quality tissue sampling

VET3410 18g x 7.0cm

VET3412 14g x 15cm

Jamshidi® Bone Marrow NeedleThe Jamshidi® bone marrow biopsy needle, features a light-weight handle with built-in comfort knob, enabling the practitioner to apply significant pressure, without discomfort. The needles are packaged with an adaptor, to accommodate luer lock syringes.

Tapered distal tipVET3400 13g x 5cm

VET3404 8g x 10cm

VET3402 11g x 10cm

VET3411 18g x 15cm

VET3414 14g x 7.0cm



Replacement Blade0.8mm cut ceramic blade

VQ3705

Air Dental Machine

What is Magnetostrictive Dental scaler?

Magnetostrictive scaling offers far superior scaling compared to traditional methods utilising a circular scaling motion that reduces enamel scratching yet has enough power to remove the most stubborn calculus.

The Vetquip Magnetostrictive scaler has its own water supply and pump to deliver enough water to lubricate and clean debris away but not be a nuisance when performing dentals.

VetQuip is pleased to release our exclusive “VetPro Carbon” Air Dental machine, using an VetQuip exclusive DCI dental machine and other quality US manufactured components like MTI dental oil-less low speed motor. This machine is only fitted with top quality components to guarantee continuous hassle free dentals at a realistic price.

OIL FREE COMPRESSOR - The VetPro Carbon uses a low noise oil free compressor that has been designed exclusively for dental use, oil free means no messy oil changes and requiring minimal regular maintenance. The pancake reservoir uses an ergonomic design taking advantage of all space of the Carbon Fibre mobile base.

RELIABLE COMPONENTS - The VetQuip Carbon has been exclusively designed for the Veterinary industry, through your feedback we have listened and put together what we think are the best components available like Carbon Fibre base and compressor cover, Ergonomic DCI dental unit and frame, highest quality low & H.S. motors and Twister Prophy heads to stop animal hair getting caught during polishing.

FEATURES Accessories standard to us but optional to others MTI oil-less low speed motor. High Speed handpiece with integrated LED generator. 2 water bottles. Suction handpiece. Twister Prophy heads. 21L oil-less air compressor

DENTAL

VQ9041(A) Vetquip Premium Air Dental machine including compressor

VQ9242 Vetquip Dental Air Compressor only

Vetquip Dental Air Compressor listed above and pictured on the Air Dental Machine can also be sold separately.

VQ9042

Magnetostrictive Dental Scaler



DENTAL

SPECIFICATIONSAir displacement: 115L/MINMax pressure: 8BarTank: 25ltrSize: 45cm x 45cm x 59cmWeight: 25kg

VetQuip DA5001Dental Air Compressor

The VetQuip DA5001 Dental Air Compressor is a quiet (53dB(A) noise level), oil-free compressor.

VQ9243

Bonart Art-M3IIThe Bonart Art-M4 System is a 30KHz stand-alone system. Up to a maximum power setting of 50, with auto tune system, that locks the frequency and stabilises the power setting.

The well-equipped feature called “AGC” (Auto Gain Control) stabilises the power setting and prevents stalling, during scaling operation.

System comes with a built in LCD digital screen, that displays the mode and power setting and allows the user to choose from scaling, perio and endo mode, with one turn of the knob, and an easy to access water control knob, at the front end of the hand piece cable.

SYSTEM INCLUDES 1 x Water Bottle 2 x Inserts

VQ9044(a)

Replacement Bonart Piezo Handpiece

VQ9016

Cavitron Insert 30Mhz replacement Cavitron. Insert with standard tip. VQ9212

Cavitron Insert25Mhz replacement cavitron insert with standard tipVQ9210

SP1 Dual Scaler/ Polisher

VQ9020(a) Supplied with accessories and water container

25Khz cavitron scaler, 0 - 35,000rpm micromotor combination.

PACKAGE INCLUDES Contra angle Prophy cups Water tank Cutting burrs Prophy paste Cavitron insert

Cavitron Scaler HandpieceReplacement cavitron scaler handpiece and cableVQ9023-1



For replacement scaler tips for piezo/cavitron and air scalers contact VetQuip.

SCALER TIPSScaler/Micromotor Package DealPiezo ultrasonic scaler and micromotor package - outstanding value for money

Take advantage of this excellent dental package deal!

Marathon 3 MicromotorA powerful micromotor for sectioning and/or polishing teethIncludes: Prophy cups, Prophy paste, Contra angle, Cutting burrs.

FEATURES 0 - 35,000rpm Excellent torque Variable foot speeds On/Off foot control Forward and reverse switch

VQ9030(a)

Replacement Micromotor HandpieceReplace your worn out handpiece instead of buying a whole new micromotorVQ9040 Marathon Micromotor VQ9020-1 Bonart SP1 Micromotor VQ9040VQ9030(a)

DENTAL

FEATURES Titanium alloy handpiece construction Piezo ceramic components ensure cool operating

temperature with high efficiency at all times Broadband auto frequency adjusting Electric-magnetic water control valve

VQ9015

Supplied with 5 tips and water container

Piezo Ultrasonic ScalerNew powerful 30KHz piezo ultrasonic scaler, features the latest technology with top quality components.



DENTAL

FG Carbide BurrsFriction grip carbide burrs. Supplied in packs of 5.

Diamond Disc and Mandrel22mm double sided diamond disc

VQ9186 (a) HP VQ9187 (a) RA

Prophy Cups

Vet-PasteProphy Paste Spearmint flavour Medium grit 200gm

VQ9233

Snap OnVQ9232 x 144

Latch TypeVQ9230 x 36

Screw OnVQ9231 x 144

RA Carbide Burrs Twist & Go CupsRight angle (latch fitting) carbide burrs. Supplied in packs of 5.

VQ 9170 (2 Round) VQ 9171 (4 Round) VQ 9172 (6 Round) VQ 9173 (35 Inverted cone) VQ 9174 (701 Crosscut taper fissure)

FG Type Fitting

RA Type Fitting

VQ 9175 (½ Round)

VQ 9176 (2 Round)

VQ 9177 (4 Round)

VQ 9178 (6 Round)

VQ 9179 (35 Inverted cone)

VQ 9180 (330 Pear shape)

VQ 9181 (333 Pear shape)

VQ 9182 (557 Crosscut fissure)

VQ 9183 (700 Crosscut taper fissure)



Disposable Prophy heads suitable for low speed air driven handpiece.

VQ9192-F Firm (Pack of 100)

VQ9192-S Soft(Pack of 100)



High Speed Sonic Air ScalerHigh speed sonic air scaler for use with air dental systems. Supplied with 3 tips.VQ9100

High Speed LED Handpiece4 hole air driven high speed handpiece with integral LED Light Generator, no need for fibreopticsVQ9121

Slow Speed Handpiece4 hole air driven slow speed handpieceVQ9160

Handpieces

Contra AngleContra angle latch headVQ9193

E-Type Contra Angle Latch HeadE-type contra angle, latch head.VQ9194

E-Type Contra Angle Head E-type contra angle, latch head only.VQ9196

E-Type Contra Angle Head Snap OnE-type contra angle, snap on, latch head only.VQ9196-1

E-Type Contra Angle Snap OnE-type contra angle, snap on prophy head.VQ9196-2

Prophy HeadProphy head, snap on.VQ9190

4Hole E-Type Slow Speed Air Handpiece4 holes slow speed air handpiece for E-Type Contra Angle. Excludes nose cone. VQ9160-1

Dental Air Water Male Connector With one way valve VQ9154-7

Dental Toggle On/off valve two wayVQ9154-4

Replacement High speed Handpiece Turbine VQ9150

Replacement High speed Handpiece Turbine Push Button VQ9121-T

Replacement NSK High speed Handpiece Turbine VQ9125

High Speed Handpiece Burr Changer VQ9140

Dental Compressor Air Regulator With filterVQ9154-6

Midwest 4-hole Hose Connector and Nut VQ9154-2

Replacement 4-hole dental hose is available on request

Dental Air Water Female Connector With one way valve VQ9154-8

DENTAL



call VetQuip today on 1300 888 427

Vetquip now offers a full range of NSK dental Heads and Handpieces For NSK Dental sales service and parts

DENTAL

NSK Dental Heads and Handpieces

Root Elevator, Small, 2mm. 5¼”D-SV2216-00

Root Elevator, Bein, D-SD0741-01


Extracting Forcep, English, KleinD-SD0294-03

Root Elevator, SmallD-SV2222-00



Root Fragment Forcep, WitzelD-SD0308-502



Extracting Forcep, 7” LD-SV2236-00

Extracting ForcepD-SV2245-00



DENTAL

Cutter, MolarD-SV2230-00

Cheek SpreaderD-SD0051-00A

medium, GRAY, 9cmD-SV0046-09

Mouth Gag,


Scalar, Double

Extracting Forcep, Maller Feliner, 4½”D-SD2234-00


Mouth Gag,

Cheek SpreaderD-SD0051-00B


Mouth Gag,

Rodent Mouth GagD-SV0049-00H

Mouth Gag,

ended, Jacquette, 2.3 ssD-SV2561-00

Crossley Rabbit

D-SV2204-00

Root Elevator, Perio

D-SV2215-00

Root Elevator, Perio

6”D-SV2203-00

Scraper, Canine Tartar, 5¾”

D-SV2251-00

Curette, Double ended, Subgingival,

D-SV2200-00

Kidney Bowl -Size 170 x 100 x 35mmD-JH1056-17



DENTAL

Kidney Bowl -Size 250 x 140 x 40mm D-JH1057-25

Kidney Bowl -Size 275 x 150 x 45mm D-JH1058-27

Dental Explorer -Length 6 ½” Dental Exploring Measuring

ProbeD-SV2211-00

Double ended Scraper - Length 6” StainlessD-SV2201-00

Smith Baxter Mouth Gag - XsmallD-SV2560-A

Smith Baxter Mouth Gag - SmallD-SV2560-B

Smith Baxter Mouth Gag - MediumD-SV2560-C

Smith Baxter Mouth Gag - LargeD-SV2560-D

Smith Baxter Mouth Gag - XlargeD-SV2560-E

“Leaders in animal care products for over 60 years”

Suburban Cages Co. Ltd



DOOR Stainless steel door spokes,

are deburred smooth to eliminate sharp ends.

Stainless steel electro polished removable ambidextrous door, may be remounted with hinges on the right side.

Door fits snug to the cage body, to eliminate areas where an animal’s paws could be pinched.

.1875-in. (.48cm) diameter stainless steel vertical spokes, are spaced 1-in. apart and welded at every intersection to crossmembers and frame.

.3125-in. (.79cm) diameter stainless steel door frame and crossmembers, are welded together for strength.

LATCH Stainless steel latch easily disassembles for sanitising and adjusting.

.3125-in. (.79cm) diameter stainless steel latch keeper latches door securely.

Heavy 12-gauge stainless steel latch brackets.

Latch connector bar is notched for easy opening.

Heavy 12-gauge stainless steel self-latching door latch connector is designed to accommodate a padlock for greater security.

BODY 22-gauge type

304 stainless steel body, is heli-arc welded into one piece, to create the strongest cage available.

.750 in. (1.90cm) covered rear corners on top and bottom, eliminate accumulation of dirt and bacteria.

.750-in. (1.90cm) radius, bends on all sides. Back provides a smooth, easy -to-clean interior surface.

Distinctive floor design, with fluid-retaining front lip, is standard on all Regal Cages.

Bottom lip overlaps lower cage, when used in a Regal Cage arrangement.

FRAME 18-gauge stainless steel

die-formed floor support brace, keeps floor rigid for animal comfort.

18-gauge stainless steel die-formed rear support, keeps cage level.

HINGES .3125-in. (.79cm) diameter

stainless steel hinge pins, allow easy removal of door.

Heavy 12-gauge stainless steel die-formed barrel hinges, operate smoothly for the life of the cage.

HARDWARE Stainless Steel installation hardware, is the strongest

available. Vertical molding available. Vertical molding strips and 14-gauge bolt-on corner plates, mount easily with .250-20 stainless steel truss-head machine screws.



Available in 21 different sizes - more than anywhere else!

Two smaller doors, allow you to have a large cage, with less aisle space needed to open doors all the way.

14-gauge stainless steel latch, top and bottom plate latches door in two places.

Stainless steel channel, holds divider Panel in place.

There’s no center post to get in the way, when placing animals in the cage.

Self-locking door latch, secures door at top and bottoms.

Regal Cages P/N INCHES CENTIMETRESC-102100-2 18W x 18H 45.72W x 45.72H C-102101-2 24W x 18H 60.96W x 45.72H C-102102-2 18W x 24H 45.72W x 60.96H C-102103-2 24W x 24H 60.96W x 60.96H C-102104-2 30W x 24H 76.20W x 60.96H C-102105-2 36W x 24H 91.44W x 60.96H C-102124-2 48W x 24H DD* 121.92W x 60.96H DD* C-102106-2 24W x 30H 60.96W x 76.20H C-102107-2 30W x 30H 76.20W x 76.20H C-102108-2 36W x 30H 91.44W x 76.20H C-102109-2 42W x 30H 106.68W x 76.20H C-102110-2 48W x 30H 121.92W x 76.20H C-102111-2 48W x 30H DD* 121.92W x 76.20H DD*

Double Door (DD) Regal CagesDouble Door Cages, allow you to have a large cage, without a large door. Our double door cages, have no center door-latching post, for easy use and animal comfort. Large animals can be easily placed inside, without having to maneuver around a center post.

Doors have self-latching pins, that slide into top and bottom latches.

An optional stainless steel divider panel, can be used to create two smaller cages, for housing two animals.

Channel included with each Double Door Cage is attached to back of cage to stabilise divider panel.

See Regal Cage finishing accessories for divider panels.

P/N INCHES CENTIMETRES C-102113-2 30W x 36H 76.20W x 91.44H C-102114-2 36W x 36H 91.44W x 91.44H C-102115-2 42W x 36H 106.68W x 91.44H C-102116-2 48W x 36H 121.92W x 91.44H C-102117-2 48W x 36H DD* 121.92W x 91.44H DD* C-102118-2 60W x 36H DD* 152.40W x 91.44H DD* C-102119-2 72W x 36H DD* 182.88W x 91.44H DD*

To specify the height of the resting shelves above the cage floor, change the cage P/N, 8th and 9th position 0- to:

BF approximately midway in 18-in high cages

BR approximately midway in 24-in high cages

CD approximately midway in 30-in high cages

CP approximately midway in 36-in high cages

See dimension chart, for other resting shelf heights

To order cages with factory-installed resting shelf, change the cage P/N 7th position 0, to:

A Straight resting shelf

B Corner resting shelf in left back corner

C Corner resting shelf in right back corner

D Corner resting shelves in left and right back corners

*DD after the height, indicates a double door cage. All cage bodies measure 28.25-in. (71.75cm) front to back. Cages measure 30.188-in. (76.68cm) deep overall,

including latch.

SUBURBAN CAGES



P/N INCHES CENTIMETRESC-102100-2 18W x 18H 45.72W x 45.72H C-102101-2 24W x 18H 60.96W x 45.72H C-102102-2 18W x 24H 45.72W x 60.96H C-102103-2 24W x 24H 60.96W x 60.96H C-102104-2 30W x 24H 76.20W x 60.96H C-102105-2 36W x 24H 91.44W x 60.96H C-102124-2 48W x 24H DD* 121.92W x 60.96H DD* C-102106-2 24W x 30H 60.96W x 76.20H C-102107-2 30W x 30H 76.20W x 76.20H C-102108-2 36W x 30H 91.44W x 76.20H C-102109-2 42W x 30H 106.68W x 76.20H C-102110-2 48W x 30H 121.92W x 76.20H C-102111-2 48W x 30H DD* 121.92W x 76.20H DD*

SUBURBAN CAGES

Examples of Regal Cage Arrangements

4-Foot (1.22m) Wide, 3-Cage Regal Cage Arrangement

INCLUDES Top: Two 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Bottom: One 48-in.W x 30-in.H (121.92cmW x 72.20cmH) DD cage.

P/N DESCRIPTION 3000000021 Regal Cage Arrangement


INCLUDES Top: Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Bottom: One 48-in.W x 30-in.H (121.92cmW x 76.20cmH) DD cage. One 24-in.W x 30-in.H (60.96cmW x 76.20cmH) cage



INCLUDES Top: Three 24-in.W x 30-in.H (60.96cmW x 76.20cmH) cages. Bottom: Two 36-in.W x 30-in.H (91.44cmW x 76.20cmH) cages.



INCLUDES Top: Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Middle: Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Bottom: Two 36-in.W x 30-in.H (91.44cmW x 76.20cmH) cages.


Call 1300 888 427 to custom build your cages



SUBURBAN CAGES


INCLUDES Top: Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Middle: Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Bottom:Three 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages.



INCLUDES Top: Four 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Middle: Two 36-in.W x 30-in.H (91.44cmW x 76.20cmH) cages

One 24-in.W x 30-in.H (60.96cmW x 76.20cmH) cage. Bottom: Two 48-in.W x 30-in.H (121.92cmW x 76.20cmH) DD cages.



INCLUDES Top: Four 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Middle: Four 24-in.W x 24-in.H (60.96cmW x 60.96cmH) cages. Bottom: Two 48-in.W x 30-in.H (121.92cmW x 76.20cmH) DD cages.



INCLUDES Top: Six 24-in.W x 24-in.H

(60.96cmW x 60.96cmH) cages. Middle: Four 30-in.W x 30-in.H

(76.20cmW x 76.20cmH) cages One 24-in.W x 30-in.H (60.96cmW x 76.20cmH) cages.

Bottom: Three 48-in.W x 30-in.H (121.92cmW x 76.20cmH) DD cage. P/N DESCRIPTION 3000000171 Regal Cage Arrangement



C-FB2X482436 Fibreglass Cage Bank 2 level C-FB2X4824 Fibreglass Cage Bank 2 level

C-FB3X4824 Fibreglass Cage Bank 3 level

C-FB2X4836 Fibreglass Cage Bank 2 level

VetQuip Fibreglass CagesVetquip now manufacture and assemble our own in house designed Australian made front drained fibreglass cages, utilising the same quality gates as our Suburban Stainless steel cages. Fibreglass offers superior noise attenuation and less heatsinking when compared to stainless and are more pleasant to the eye when put in areas where customers can see their animals. Our unique front drain system is covered offering little chance to cross contaminate and no exposed edges to catch when moving an animal.

Available in several different configurations, optional dividers, thicker fibreglass and bolted through all stainless hinges, compare ours to the others and you will agree that we feel the best fibreglass cages are made by VetQuip. Call us with your requirements and our specialist customer service team will be glad to assist with design and costings.

SUBURBAN CAGES

1220

1765

1220

2115

1220

1455

1220

2065

1220

1095

1220

790

**All cages supplied are dividable & drain to the left**

** Drawings not to scale**

1220

1765

1220

2115

1220

1455

1220

2065

1220

1095

1220

790



1220

1765

1220

2115

1220

1455

1220

2065

1220

1095

1220

790



1220

1765

1220

2115

1220

1455

1220

2065

1220

1095

1220

790





Solid section PVCOpen grid mattingResistant to alcohol and chemicalsIdeal for cages and Anti Fatigue MatsSold per metre

C-12380/914 (914mm wide x 1mtr) C-12380/670 (640mm wide x 1mtr)

Available in blue and black.

VetQuip Cage Mat

Clipboards

ICU Patient Warming Pad

Holds information, about the animal in your care, yet lifts off quickly and easily to use as a writing surface to update the chart. Clip holds chart securely to keep all pertinent information at hand and easily accessible. Made of durable, easy to sanitise stainless steel.

A safe reliable heating pad which senses temperature beneath the patient and maintains the temperature you set. Pad and controller made from high strength carbon fibre. Dimensions 650mm (L) x 440mm(W) x 20mm(H)

Adjustable Temperature from 12° - 41°c

VQ5595(a)

P/N DIMENSIONS: INCHES CENTIMETERS

C-CH001-S 9W x 6H 22.86W x 15.24HC-CH002-L 9W x 12H 22.86W x 30.48H

Clipboard with BinBin/clipboard combination, lifts on and off easily, lets you keep medicines, special foods or patient’s personal belongings, leash, collar, etc. and dispensing schedule right on patient’s cage. Helps to remind you when the next dose is due. Made of durable, easy to sanitise stainless steel.

P/N IN HEIGHT (W) OVERALL DIMENSIONS INCHES CENTIMETERS

C-CH004-S 4.188H 10.64H x 6W x 9H x 3D 15.24W x 22.86H x 7.62DC-CH003-L 5.188H 13.18H x 9W x 12H x 3D 22.86W x 30.48H x 7.62D

SUBURBAN CAGES - ACCESSORIES



SUBURBAN CAGES - ACCESSORIES

Transforms Regal Cage into a respiratory therapy cage

ALLOWS FOR THE FOLLOWING THERAPIES: Oxygen Oxygen with moisture Oxygen with moisture and medication Compressed air with moisture Compressed air with moisture and medication

.

Clear door, allows for patient observation and features rubber gasket seal, which is open at the corners to create a positive atmosphere, yet allows for venting. A continuous-flow nebuliser, mounted on door, delivers a regulated flow of the preferred therapy. Ice compartment mounted on door, holds ice to cool therapy liquid, if needed. Thermometer/hygrometer, mounted on door interior, indicates temperature and humidity of cage. Door mounts hinged left onto front of cage, in place of the regular door; uses regular hinges and latches to close securely with .25-in. (.64cm) inner diameter x .062-in. (.16cm) thick tubing. Only available for single-door cages.

Therapy Doors

Clear polycarbonate panel, resists scratches and discoloration

P/N FITS CAGE SIZE: INCHES CENTIMETERS C-DR2424 24W x 24H 60.96W x 60.96H C-DR2430 24W x 30H 60.96W x 76.20H C-DR3030 30W x 30H 76.20W x 76.20H C-DR3630 36W x 30H 91.44W x 76.20H C-DR4830 48W x 30H 121.92W x 76.20H

ADDITIONAL PARTS: 212126 Nebulisers with Supply Hose

Thermometer/hygrometer monitors temperature and humidity

Melted ice used for cooling oxygen is drained from compartment through convenient valve



TOTAL PEN SYSTEMS

Total Animal Pen SystemsSTAINLESS STEEL RAISED-FLOOR SYSTEMSOur raised-floor Pen System, allows fluids and debris to fall through to the facility floor to keep the animals in your care drier and more comfortable. Expanded metal floor sections have bright plastisol coating to make debris more visible and encourage kennel staff to keep pens cleaner, more sanitary. Full length, floor support Brackets or rings built into partition and end panels keep floor sections completely stable at all times. This system uses six components to create a totally free-standing Pen system: Swinging Gates, Left Partition Panels, Right Partition Panels, End Panels, Back Panels and Coated floor panel.

FLOOR SECTIONSIf you use facility walls for one or both ends of your Pen system, End Panels may be eliminated and you will need to order Wall-mount Floor support Brackets or Rings.

Swinging Gate Stainless steel Raised-Floor left/right End Panel with Floor support Brackets Also available with Floor-support Rings Stainless steel Back Panel Back Panels may be ordered with guillotine doors to create a more versatile Pen system Removable plastisol-coated floor sections

LOWER SECTION OF END/PARTITION AND BACK PANELS ARE AVAILABLE IN FOUR STYLES Single-wall stainless steel Double-wall stainless steel Fiberglass reinforced plastic in a choice of colours Water-resistant laminate in a choice of colours

Swinging Gates for Total Pen SystemsOur exclusive features ensure your Total Animal Pen System Gates, will operate smoothly for years to come. Fully welded design prevents fluids from seeping into frame, to make our Pen Systems, the most sanitary pens you can buy. GRILL - Grill is fully circumference welded to the tubular frame, at all contact points, to eliminate shifting, racking and rattling, and prevent fluids from entering the frame. Vertical spokes are made of .2375-in. (.603cm) diameter stainless steel. Crossmembers are made of .312-in. (.792cm) diameter stainless steel. Stainless steel vertical spokes and crossmembers, are welded together at every intersection.

FRAME - Gate jamb and frame, are made of 18-gauge-1.25-in. (3.17cm) square type 304 stainless steel tubing, with uniform, non-glare finish. All corners are weldnut welded to the inside of the tubing, to allow you to disassemble and reassemble pens without loss of structural integrity. Mitered corners and heli-arc welded joints on gate jamb and frame seal out fluids and debris. Gate features a uniform, non-glare, easy-to-clean finish.

HINGES - Stainless steel .3125-in. diameter (.79cm) hinge pins, remove easily for simple maintenance, if necessary. Durable heavy 12-gauge stainless steel barrel hinges, are welded to the swinging gate jamb and frame for smooth operation.

LATCH - Heavy 12-gauge stainless steel latch brackets, are adjustable for smooth, secure operation. Heavy 12-gauge stainless steel latch connector, secures the gate at 2.31-in. (78.74cm). More secure than gates, with only one latch in the center. Latch connector disassembles easily, for cleaning and adjustments. Latch connector, is designed to accommodate a padlock for extra safety.



OPERATING TABLE & ACCESSORIES

Over Instrument TableUse this table to keep surgical instruments, supplies, even monitoring equipment conveniently close at hand during procedures. Manufactured entirely of durable type 304 stainless steel, our Over Instrument Table features a mobile telescoping base for versatility. Our conveniently-designed crank operates from either side of the Table to raise top height from 39-in. to 62-in. (99.06cm to 157.48cm). Table top surface measures a full 40-in. long x 23-in. wide (101.60cm long x 58.42cm wide) to hold an assortment of supplies. The raised back rail keeps equipment from sliding off accidentally. Rolls smoothly on 3” (7.62cm) diameter non-marking casters to allow you to move the Table into position easily. Two casters have brakes for safety.

P/N DIMENSIONS: INCHES CENTIMETERS 108431-23 40W x 39 to 62H x 23D 101.60W x 99.06 to 157.48H x58.42D

Over Instrument Table can be raised and lowered to adjust to the height of your operating table

Crank operates from either side of the Table for convenience. Removes and stores under Table surface when not in use.

33-in. (83.82cm) wide clearance between legs allows Table to easily straddle operating tables

Access-A-Rail Operating Table SystemANOTHER SSCI EXCLUSIVE - THE ACCESS-A-RAIL TIE-DOWN SYSTEMAccess-A-Rail operating table accessorising rails makes surgery so much easier. Wrap-around rails accommodate cam cleat tie downs and a selection of accessories, specially designed, to keep surgical supplies close at hand. Unique design, even allows most accessories to remain level, when the table is tilted.

Choose from our wide selection of accessories, shown on the following pages to make your operating table fully functional for your needs.

Access-A-Rails are included with all SSCI Operating Tables. Accessories are sold separately on the following pages.




Access-A-Rail AccessoriesAdjustable Height Cam Cleat Tie-downs Designed to give you greater positioning flexibility. Includes adjustable-height stainless steel arms, with cleats to attach to Access-A-Rails and two Cam Cleat Tie-downs for positioning patients. Package of two.

VQ5622-2 13237-00-AAAAAA

Over-the-Table Restrainer AssemblyStainless steel supports attach to Access-A-Rails and hold a stainless steel rail, that spans the width of your Operating Table to give you upper restraint capability when needed. Supports and upper rail adjusts in height for exceptional flexibility. Includes four rail cleats. To use as shown here, order two additional Cam Cleat Tie-downs.

VQ5622-1 13242-00-AAAAAA

Cam Cleat Tie-downsOrder additional Cam Cleat tie-downs to get even more versatile positioning capability from your Access-A-Rail Operating Table System and accessories. Package of two Cam Cleats.

VQ5622-3 13236-00-AAAAAA

Stainless Steel Rail ExtensionA Rail Extension allows you to place Tie-downs or other accessories slightly away from the table and give you better access to the surgical site. Includes cleat for attaching to Access-A-Rails.

VQ5622-4 13232-00-CHAAAA

STATIONARY INSTRUMENT TABLE Remains parallel to Operating Table Top, and is designed for procedures that do not require tilting the Table Top.

PIVOTING INSTRUMENT TABLE Has a specially designed cleat to keep table parallel to the floor even when Operating Table Top is tilted. Both styles adjust in height, for convenience. Tray removes easily, for organising supplies before procedures and for cleaning. For greater convenience, order additional trays below.

STATIONARY IV POLE Remains parallel to Operating Table Top, and is designed for procedures that do not require tilting the Table Top.

PIVOTING IV POLE Has a specially designed cleat to keep the pole perpendicular to the floor even when Operating Table Top is tilted. Both styles adjust in height for optimum delivery of IV solutions.

Stainless Steel Adjustable Height Instrument TablesAttach an Instrument Table directly to your Access-A-Rail Operating Table System to keep supplies close at hand and free up floor space around the Operating Table.

Stainless Steel Adjustable Height IV PolesTwo-hanger IV Poles attach directly to your Access-A-Rail Operating Table System to free up floor space around the Operating Table.

Stationary IV Pole C-13238-00-AAAAAAPivoting IV Pole C-13239-00-AAAAAA

C-13240-00-AAAAAA

C-13241-00-AAAAAA

C-13238-00-AAAAAA

C-13239-00- AAAAAA

Stationary Instrument Table C-13240-00-AAAAAAPivoting Instrument Table C-13241-00-AAAAAA



C-13239-00- AAAAAA

Suburban Flat Top Operating Table The Suburban Surgical Operating Table is available in flat top or V top styles. Durable stainless steel manual tilt mechanism with quick lock/release handle lets you change the table top angle from horizontal to almost vertical with a 360º rotation.

Convenient pump-action foot pedals, let you change the table height quickly and easily. Locking handle ensures the table stays at the right height. Suburban table tops feature an Access-A-Rails tie down system, to assist in the positioning of animals during surgical procedures.

Dimensions: 1482.7mm (L) x 568mm (W) x 850mm - 1155.7mm(H)

VQ5622 360º rotation with adjustable height and tilt

Cantilever table for use with C-Arm and radiographic surgery. Electric height adjustment from 80 - 110 cm Longitudinal 15° electric tilting Lateral 20° electric tilting X-ray translucent plate 140 x 50 cm Suitable for small animal arthroscopy Moveable on castors, lockable rubber legs. Load capacity: 120kg OP-rails 4 pieces quick-release tie-down cleats Joystick control box Battery or mains power Made in Austria Optional accessories include: quick release tie-down cleat, infusion pole,

adjustable side supports, narcotic bow, leg support with tie-down cleat.

VQ5634

PannoMed Aeron Operating Table

Suburban V-Top Operating Table Convenient pump-action foot pedals, activate the hydraulic lifting mechanism to smoothly raise and lower the table. Table top also may be rotated a full 360º. Mounting bracket/tilt mechanism is made entirely of stainless steel, for unsurpassed strength and durability. Table top may be locked in any position from horizontal to near vertical.

Dimensions: 1473.2mm (L) x 473.7mm (W) x 889mm - 1193.8mm (H)

VQ5621





Pannomed Electric Lift Operating TableStainless steel recess top with drain

Length. 130cm x 60cm wide Lift range. 72cm to 102cm Full tilt table top Max weight., 120kg Manufactured in Austria.

VQ5635-BLUEVQ5635-RED

Necropsy TableThe specialist Necropsy Table is a large, heavy duty table, designed for use with large animal up to 2,500 kilograms.

1600mm wide x 2700mm long work surface available with a low profile 28mm raised perimeter edge, or a higher profile 75mm perimeter edge. 450mm wide x 900mm long recessed access area in the middle of one

side of the work top The work surface, is sloped to a 1,200mm opening on one side of the

table, for drainage, to a floor drain. 330mm or 380mm low height and 1100mm or 1150mm raised height

(depending on perimeter profile) 240V

Necropsy Table

Hand held controls are standard, foot pedal controls optional.

Autopsy TableThe specialist Autopsy Table is a large mobile table for large size animals, up to 600 Kilograms, with a work surface that is sloped to a 75mm threaded draining connection.

2 x swivel casters, 2 x fixed castes and 1 x floor lock. Hand held controls standard, foot pedal controls optional. 240V

Dimensions: 1050mm (W) x 2100mm (L) x 40mm high perimeter lip

Autopsy Table

Low height of 300mm and maximum height of 1200mm




Suburban Vet Mate Lift Table

Scissor Lift TableVersatile multi-purpose scissor lift table. Carries up to 300kg with a stowaway handle. Pedal action hydraulic height adjustment lift, two locking wheels and controlled drop. The stainless steel top 50cm x 120cm, is available as flat top, or recessed around the edges, making it suitable for use as a surgery table.

Dimensions: 1200mm (L) x 500mm (W) x up to 900mm (H) – Hi Lift up to 1300mm (H)

A must for every Veterinary Hospital. Protects patients and your staff, by safely lifting and transporting patients throughout the facility.

Recess Top High Lift Flat Top VQ5629(a) VQ5628-1(a)

Flat Top Hi Lift Recess Top VQ5628(a) VQ5629-1(a)

Recessed top model features tie downs for securing limbs during surgery, drain and mounting for bucket.

Adjustable to give you the optimal working height for your needs and for easier maneuvering and storage

Adjustable tie-down system lets you safely position animals

Stainless Steel Examination Treatment Top with fluid retention lip

FRAME Fully-welded chassis and frame channel, are heavy gauge tubular stainless steel.

Stainless steel ball bearings, roll through the channel frame.

Bronze bushings at all pivot points, ensures long wear.

LIFT MECHANISM Powerful actuator lifts up to 90kg smoothly, from 33cm to 96.5cm high.

Rechargeable power pack with plug-in cord and charger, gives you lifting capacity when and where you need it.

Foot operated chassis mounted UP/DOWN lift mechanism is located at the base of the table and can be mounted on either the end or side

5-in. Corrosion resistant locking casters for easier movement throughout your facility

C-12761-01 Suburban Vet Mate Lift Table OVERALL SIZE LOWEST HEIGHT MAXIMUM HEIGHT

136 cm H x 57cm W 33cm 96.5cm

Full Stainless Steel Construction

Plumbing SetPlumbing set for Slimline Prep & Treatment or Multi-purpose Wash and Treatment tables, include mixer, wand system and large bore drain.

VQ5626-2(a)

Slimline Prep and Treatment TableThis table slopes back to the sink end and drains into a standard drain outlet. A two piece removable grille, fits onto the tub, so the animal stays dry and clean, when liquid is in abundance. Tie down cleats are located around the underside of the perimeter. Completed in a satin finish.

Dimensions: 1670mm (L) x 580mm (W) x 900mm (H)

VQ5626-1



Multi-purpose Wash and Treatment TableAll the features of our slimline table with the added advantage of a 350mm tub at one end. Sloped tub sides, lead to a perforated washing platform measuring 185mm long x 380mm wide. Completed in a satin finish.


VQ5626

STAINLESS STEEL PRODUCTS

Surgical Scrub SinksA clean surgical scrub area is an essential part of sanitary, bacteria-free procedures. We make it easy for you to scrub up with quality Australian Made 304 grade stainless steel Scrub Sinks.

VQ5626-SSINK Single Stainless Steel Scrub Sink

D1 – 600mm D2 – 565mm D3 – 300mm

VQ5626-DSSINK Double Stainless Steel Scrub Sink

D1 – 1100mm D2 – 1065mm D3 – 550mm

Surgical Scrub Sinks A clean surgical scrub area is an essential part of sanitary, bacteria-free procedures. We make it easy for you to scrub up with quality Australian Made 304 grade stainless steel Scrub Sinks.

Complete Tubs including Wall Mount Brackets made from 304 Stainless Steel

VQ5626-SSINK Single Stainless Steel Scrub Sink D1 – 600mm D2 – 565mm D3 – 300mm VQ5626-DSSINK Double Stainless Steel Scrub Sink D1 – 1100mm D2 – 1065mm D3 – 550mm



To start designing your work area today call Vetquip on 1300 888 427

To give your work areas a fully-coordinated, professional appearance, simply combine a grouping of our Treatment and Prep-Procedure Tables, Stainless Steel Shallow & Deep tubs into a highly-functional Prep-Procedure/Treatment Center.

Design Your Own Modular Work Space

Wall Mounted Consult TableStable, robust, heavy duty stainless steel consult/examination table. Recessed top.


VQ5615 Flat packed for shipping

Consult TableStable, robust, heavy duty stainless steel consult/examination table.

VQ5616 1200mm (L) x 600(W) x 800(H) - Shipped Flat packed. Low Support Rail.

VQ5616-E 1100mm(L) x 600(W) x 800(H) - Shipped as welded unit.

No lower support rail.

Slip Resistant MatSlip resistant mat for consult/exam table (not pictured)

VQ5616-1

Cage Mount I.V Pole and Pump MountSturdy, height adjustable ramshead stainless steel I.V pole.

VQ5565-1

VQ5616

I.V PoleSturdy, height adjustable ramshead stainless steel I.V pole. Alloy 5 star base with castors.

VQ5565(a)


VQ5616-E




Cat Weigh Scale0-20kg with 10gm resolution. Stainless steel tray. NB: Power supply with 9V backup battery. Dimensions: 505mm (L) x 300mm (W) x 65mm (H)

VQ5619

Detachable display indicator

Platform Weigh Scale0-150kg with a 100gm resolution. Twin strain beam for greater accuracy. Average hold button, to stop fluctuating results. Heavy duty steel tube frame, with fully welded stainless steel cover and adjustable feet. Wall mounted display.

Dimensions: 90cm (L) x 55cm (W) x 8cm (H)

VQ5620 Supplied with rubber mat

concept > design > manufacture > installation

Extending on VetQuip’s expertise in university and vet clinic fit-outs, we are now able to offer custom-built stainless steel benchtops , trolleys, autopsy tables, and custom-made stainless steel items to your specifications.

Custom Stainless Steel Products



Instrument Trolleys Stainless steel construction Safety folds to all edges Reinforced shelves 75mm castors


VQ5623

Stainless steel construction Safety folds to all edges Reinforced shelves 75mm castors


VQ5624

Stainless steel construction Safety folds to all edges Reinforced shelves 75mm castors


VQ5625

Stainless steel construction Safety folds to all edges Reinforced shelves 75mm castors With rails


VQ5623-1



VQ5624-1



VQ5625-1

Stainless steel construction 1 x 125mm deep drawer Safety folds to all edges Reinforced shelves 75mm castors With rails


VQ5623-2



VQ5624-2





Instrument Trolleys Stainless steel construction 1 x 125mm deep drawer Safety folds to all edges Reinforced shelves 75mm castors With rails


VQ5625-2

Mayo Table 3 Leg

Stainless steel construction Height range 820mm -

1120mm Tray size 560mm x 410mm Three leg base 75mm castors

VQ5627

Stainless steel construction 2 x 125mm deep half drawers Safety folds to all edges Reinforced shelves 75mm castors With rails


VQ5625-4



VQ5624-3



VQ5623-3

Mayo Table 4 Leg

Stainless steel construction Height range 820mm -

1120mm Tray size 560mm x 410mm Four leg base 75mm castors

VQ5627-1

Stainless steel construction 4 x drawers Safety folds to all edges Reinforced shelves 75mm castors With rails


VQ5624-4



VQ5625-3



OBS-50The OBS-50 is a small but powerful ESU generator Hyfrecator. This 30Wunit has a variable power control that is adjusted using either the front panel or the power control on the pencil. Suitable for eye lash removal, Dermatological and small coagulation procedures. This unit is a must have for any vet clinic.

ELECTROSURGICAL

FEATURES Max output Power: 30W Control the power by using the power adjustment button of the

ESU pencil so as to control output power and the operation time is shortened.

Dual microprocessors (one is to control function & the second is to terminate activation if a hazard or safety issue is detected.

Memory Function: Set up the requested function parameter after turn-off. At the next startup the previous setting parameter will be displayed.

From 10W to 30W, the output of each watts can be manipulated precisely. And below 10W, the adjustment is done at the 0.1W amplitude by up and down, all of micro surgery is effected by this machine.

Stimulate the argon system (or activating the spray coagulation.) Can be used with disposable electrosurgical pad. Output Mode: Mono-polar Coagulation: (30W. Load: 1000Ω) Bipolar CoaguIation 1: ( 30W, Load: 200Ω)

Scope of Application: Dermatology, Plastic Surgery, Proctology. Gynecology. Ophthalmology, Urology, Otolaryngology. Dental/Oral Surger

TECHNICAL PARAMETER Operating ambient temperature 5°C~40°C Relative humidity range 80% Pressure range 86.0 ~ 106 .0kPa Power Supply 220/110V, 50/6OHz Operating Frequency 45OkHz±5OkHz

TRANSPORTATION DATA Size: 22.5cm (L) *19.5cm (W) *l2cm (H) (ESU Generator size); 33 (L) *25 (W) *26.5cm (H) (outer carton) Weight: 2.5kg (Net Weight) ;4 kg (Gross Weight)

STANDARD MATCHING ACCESSORIES Instruction for Use: 1pc Power Cord: 1pc Individual Pedal Switch: 1pc Reusable Bipolar Forceps+Cable: 1pc Reusable Power Control Pencil: 1pc Reusable SS Pad+Cable: 1pc Disposable ESU Pad (Solid): 2pcs Reusable Cable for Disposable Pad: 1pcs Disposable Shard Short Blade: 20pcs Disposable Blunt Short Blade: 20pcs Wall Mount Kit: 1pc

VQ5681



ELECTROSURGICAL

INCLUDES: 1 x reusable hand-control pen

with electrode 1 x bipolar coagulation forcep 1 x connecting cable for bipolar

coagulation forcep 1 x patient return cable and plate

VQ5683(a)

All VetQuip Diathermy Accessories are Valleylab Compatible.

VetQuip EB03 High Frequency Electrosurgical Unit

SPECIFICATIONS MAX. OPEN CREST POWER LOAD VOLTAGE/VP-P FACTORPure cut 1800V 1.5 350W 500ΩBlend cut1 2700V 1.9 300W 500ΩBlend cut2 2400V 2.2 200W 500ΩBlend Cut 3 2900V 3.2 150W 500ΩSoft coagulation 3800V 4.0 100W 500ΩPoint coagulation 4600V 3.9 100W 100ΩBipolar coagulation 240V - 50W 100Ω

Weight (net): 18 KgDimensions: 395mm (w) x 205mm (h) x 510mm (d)Rated voltage: 220 V ± 10%, 50 Hz

MULTIFUNCTION - EB 03 has 5 kinds of working modes: pure cut, blend cut-1 (normal coagulation), blend cut-2 (enhanced coagulation), monopolar coagulation (forced coagulation) and bipolar coagulation, which are suitable for surgery operations such as general surgery, tumour cutting, chest surgery, orthopaedics, gynecology, neurosurgery, dermatology etc.

STRONG POWER - The maximum power of pure cut, can reach 350W. Any kind of hard tissue can be cut easily, for an easy operation.

MICROPROCESSOR CONTROL - Innovative and advanced microprocessor control system, adjusts each sub-system precisely. The power output is very stable. The minimum increment of power output is 1W.

COMPLETELY ISOLATED OUTPUT DESIGN - The current directly returns to the generator in a closed-circuit path, which reduces the risk of patient burns at the return electrode site.

AUTOMATIC POWER INSPECTION SYSTEM - The microprocessor measures the output power and the returned power in every 50 microseconds. As soon as an imbalance is detected, the unit will cut off all output power automatically.

RETURN ELECTRODE INSPECTION SYSTEM - The unit measures the contacting area between patients’ skin and return electrode, and is displayed on the control panel. As soon as the contacting area is dropped to a low dangerous level, the power output will be cut off at once and the visual & acoustic alarm will be activated.

EFFECTIVE FORCED COAGULATION - In the mode of monopolar coagulation (forced coagulation), the unit will output a high voltage output. This produces a good coagulation, especially in the case of large area bleeding.

TUVP (TRANSURE THRALL VAPORISATION OF THE PROSTATE) - Consistent quality of vaporisation with safe hemostasis and uniform coagulation depth.

BIPOLAR FORCEPS COAGULATION - When the bipolar forceps are working, the system measures the tissue resistance automatically in real time. As soon as coagulation starts, the output power will decrease according to the change of tissue resistance, till it is coagulated completely.

LED DISPLAY, SOFT TOUCH PANEL - Different working modes are labeled in different areas and colours to avoid malfunction.

EB03/Valleylab Disposable Diathermy Pencil Disposable hand-control pen with electrode. 10 Pack

VQ5675-D

Bipolar Cable for 10cm ForcepsVQ5682-C

EB03/Valleylab Autoclaveable Diathermy Patient Return CableVQ5679

Autoclaveable/Reusable Patient Return PlateReplacement patient return plate

VQ5680

EB03/Valleylab Bipolar Forcep

Replacement bipolar forcep. 15cm

VQ5683-T

EB03/Valleylab Autoclaveable Diathermy Pencil Replacement reusable hand control pen with electrode

VQ5675

Bipolar Forcep 10cm

VQ5682-T



VetQuip EB03 High Frequency Electrosurgical Unit The Niki V4 volumetric infusion pump uses standard VetQuip Niki I.V giving sets. This

compact, lightweight, programmable infusion pump is suitable for delivery of fluids, including total parenteral nutrition (TPN) and intravenous fluid therapy.

BENEFITS: Small, lightweight and compact. Macro and micro infusion capability Rechargeable internal battery Up to 10 programme settings

VQ5570(a)

Niki V4 uses standard VetQuip Niki I.V giving sets

Niki V4

Niki Cage ClipVQ5570-12

Vet ProVet Pro offers a comprehensive range of features designed to maximise safe, economic and simple administration of infusion. Vet Pro enables 6 programmes: continuous, 25 steps, TPN, intermittent, PCA and sinusoidal.

FEATURES Light, compact and robust. Macro and micro infusion capability Rechargeable li-ion battery Up to 25 programme settings

VQ5567(a)

Vet Pro uses uses standard VetQuip Niki I.V giving sets

VetQuip Niki I.V/Vet Pro Infusion Set170cm long. Latex free injection site. Male luer slip adaptor. 10dr/ml.

VQ5555 each Outer box of 50

VetQuip Niki and VetPro I.V pumps are calibrated to these I.V sets

VetQuip I.V Extension SetStandard bore tubing 1 mtr in length, female luer lock/male luer slip (patient end) fittings, Y site injection port.

VQ5553 eachOuter box of 50

VetQuip XL Niki I.V/Vet Pro Infusion Set3 metre long. Latex free dual injection sites. Male luer slip adaptor. 10dr/ml.

VQ5554 each Outer box of 50

IV FLUID THERAPY



IV FLUID THERAPY

HIGHLIGHTS Pole mount and ambulatory functionality with the same pump Highly accurate (± 3%) Broad range of infusion (0.1 – 1200 ml per hour with 0.1 ml

intervals up to 99ml) The smallest and lightest in its class. (H/W/D)142 x 78 x 40 mm.

About 600 gms with internal battery

SAFETY False bolus protection – Pump eliminates risk of giving a false

bolus when a downstream occlusion is detected by automatically reversing flow to release pressure caused by the occlusion.

2 Types of air-in-line protection – pump monitors both single air bubble sizes and the cumulative amount of bubbles in the line (air-in-line protection can be de-activated if necessary).

3 Level Access Security Codes prevent unauthorised personnel changing settings.

Connectivity to PC enabling 24 hour patient history (including charts) and 1000 event log download plus configuration of protocols and settings by computer.

VetQuip Bodyguard 1212 channel multi protocol infusion pump. Quality, reliability and lightweight frame are all combined in the BodyGuard 121.

FEATURES Easy to use programs minimise training time. Power source – The ONLY pump with

interchangeable disposable and rechargeable battery compartment. Uses rechargeable li-ion battery, disposable batteries (six AAA batteries) or pole mountable wall charger.

Piston pump mechanism ensures superior accuracy and linearity of infusion even at low delivery rates.

PROGRAMMING OPTIONS: Continuous | TPN |Bolus.

VQ5573

SPECIFICATIONSI.V. tubing size: 3.0 - 5.0mmFlow rate range: 50-500ml/HrPower requirement: 240V AC 60 HzWeight w/power cord: 1.4 lbsi-Warm dimension: 7 1./2” x 3 1/2” x 2 1/4”Suggested operating temp: 20 -25ºC

Not suitable for flow rates less than 50ml/Hr.Heating method dry heat exchange.Backup overheating protection Power interrupted at 113ºF with visual and audio alarm.Equipment classification IPX I.

i-Warm™ Fluid WarmerNew! Economical Fluid Warmer with temperature display for standard I.V. Sets.

FEATURES Portable and lightweight Convenient hanging belt to hang on I.V. pole Current temperature displayed in Fahrenheit or Celsius Temperature overheating protection Indicators for warming (orange), power (green),

and overheating (red).

BENEFITS Reduces prep time, to warm fluid. Can monitor temperature, second to second. Reduces patients’ discomfort due to cold fluid Compatible with standard I.V. sets Quickly brings the temperature of the fluid up to the patient’s

VQ5535-5



IV FLUID THERAPY

Splash Resistant Surgical GownFull front and sleeves made of re-useable barrier fabric. Overlap back made of 50/50 poly/cotton fabric for wearer comfort. Double needle construction. Tie closures. 100% polyester cuff.

G-LRGSG1/2Asep Large (Blue ½ asep surgical gown)G-MEDSG1/2Asep Medium (Blue ½ asep surgical gown)G-SMLSG1/2Asep Small (Blue ½ asep surgical gown)

Theatre GownThis theatre gown is made out of poly/cotton fabric, primarily designed for operations not involving blood-splash.

G-LRGSGPL Large (Blue surgical gown)G-MEDSGPL Medium (Blue surgical gown)G-SMLSGPL Small (Blue surgical gown)

GownsSURGICAL GOWNS & SCRUBS

FEATURES Suitable for 5ml, 10ml, 20ml, 30ml and

50ml syringes. Precise pressure monitoring system

displays real time, dynamic changes in the syringe line pressure.

Reliable pushrod combination, ensures safe operation of the syringe & avoids potential dangers.

Clamp, on rear of unit for attaching to pole. Portable design makes it convenient &

sturdy IPX4 waterproof design

Anitek M200A Syringe PumpThe Anitek M200A syringe pump is a fixed capacity pump, which delivers drugs in a specific time, without being effected by resistance inside the infusion tube. Equipped with a micro-propulsion system, it can achieve a wide speed regulation range, through the control circuit. When any syringe size (5ml, 10ml, 20ml, 30ml and 50ml) is loaded onto the pump, the identification system can automatically identify the specification of the loaded syringe. At this moment, the user only has to set the required speed and press the ON/OFF button to start the pump.

SPECIFICATIONSOverall 308mm(L) x 144mm(W) dimension: x 156mm(H)

Net weight: 2.2Kg

Speed: 50ml syringe: 0.1ml/h~1200ml/h (0.1ml/h each level)

30ml syringe: 0.1ml/h~600ml/h (0.1ml/h each level)




Accuracy: ±3%

Fast infusion: 1200ml/h (50ml syringe) 600ml/h (30ml syringe) 400ml/h (20ml syringe) 300ml/h (10ml syringe) 100ml/h (5ml syringe)

Total amount: 0.1ml~9999.9ml (0.1ml each level)

Alarm: Residual alarm, completed injection alarm, tube blockage alarm, unclamped cylinder alarm, improperly installed putter alarm, out-of-limit speed alarm, alarm of infusion equivalent to limited amount, disconnected power line alarm, battery power depletion alarm, system error alarm, neglected operation alarm.

Power supply: AC220V, 50Hz; in-built battery DC11.1V rechargeable lithium battery; the fully charged battery can sustain the pump operation for more than 3 hours at the speed of 5ml/h (specified by EN 60601-2-24:1998 standard).

VQ5494

VQ5494-S M200 Syringe Work Station



SURGICAL DRAPES & WRAPS

Surgical DrapesNew range of surgical drapes and wraps now in stock. These drapes are made from a hard wearing 65% polyester, 35% cotton fabric and feature a 10cm overlay border around the fenestration area. Colour: forest green.

Customised drapes and wraps are available on request

Surgical Wraps

60cm x 60cm VQ5408

60cm (w) x 90cm (l) VQ5409

80cm x 80cm VQ5410

100cm x 100cm VQ5411

Cat Spey60cm x 60cm/2.5cm (w) x 5cm (l)

VQ5401

Eye Surgery 60cm x 60cm/oval 3cm (w) x 8cm (l)

VQ5402

Castration Drape80cm x 80cm/8cm (w) x 8cm (l)

VQ5403

Bitch Spey60cm (w) x 90cm (l)/3.5cm (w) x 10cm (l)

VQ5404

Large Drapes90cm (w) x 120cm (l)/5cm (w) x 15cm (l)

VQ5405

90cm (w) x 120cm (l)/5cm (w) x 25cm (l)

VQ5406

120cm (w) x 120cm (l)/8cm (w) x 30cm (l)

VQ5407



Pawsitioner® Veterinary Radiographic and Surgical Positioning AidesThe Pawsitioner® is a radiotransparent positioning cradle designed to secure patients for surgery or diagnostic imag ing. Engineered and patented by a practicing veterinarian, it will enhance the safety and effi ciency of any small animal hospital. The Pawsitioner® eliminates the need for tie downs and makes it easy to prepare patients outside the operating room, without the hassle of re-positioning in surgery. It also allows hands-free radiography for many of the common views (in most cases with minimal sedation).

PORTABILITY - Patients can be transported safely and easily, from prep area to surgery and back to the wards, with the Pawsitioner®. Because of the limb restraints and anchors, acci dents while carrying a patient will be minimised.

WIDE RANGE OF SIZES - The Pawsitioner® is available in five sizes, capable of containing anything from an eight pound kitten, to a 150 pound dog.

VERSATILITY - Without repositioning, the patient can be placed on its back, or either side for V-D, left lateral or right lateral thoracic, or abdominal views.

PRACTICALITY - The Pawsitioner® is made of high-density polyethylene, which is virtually stain-proof and chemically in ert.The rotomolded positioning cradles, are non-porous and can be easily cleaned with a disinfectant such as chlorhexi dine. The straps can be machine washed, in either cold or warm water and machine dried. Because our products nest into a small space, they can be stored virtually anywhere.

Tohamed Skin StaplerThe affordable solution for perfect wound closure

Automatic stapler release, allows fast wound closure and reduces operation time.

Ergonomic design for extra control, just like a well balanced surgical instrument.

Specially polished staples made of stainless steel, perfect manufacturing technologies for perfect wound closure.

Economical staple counter, indicates number of staples remaining. This device is available in 3 different contents of staples (35, 20, 10). The skin staple remover is stainless steel, making it reliable

and sterilisable.

VQ3593-35 35 Staples

Staple Remover - Reusable

VQ3593-R

Made in Germany

Large Set of 5 Pawsitioner AidesVQ5382-5

Small Set of 3 Pawsitioner AidesVQ5382-3

DURABILITY - Our largest Pawsitioner® can hold dogs up to 120 pounds. High-density polyethylene is very resistant to impact and is un-breakable un der everyday clinical use.

ONE YEAR LIMITED WARRANTY - Guaranteed against defects in workmanship under normal use, for one year. We will either repair or replace the part. All Pawsi tioner® products are manufactured and assembled in the United States.

PEACE OF MIND - Let’s face it; there is really no such thing as a safe level of exposure to radiation. You owe it to your staff, to provide them with every opportunity to protect themselves, from unnecessary exposure. Addi-tionally, you will greatly enhance the efficiency of your hospital, by using our products.

SKULL VIEWS - Because of the numerous locations of Velcro® anchors and numerous straps, almost any view of the skull can be achieved with the Pawsitioner®. Rostral-Caudal views of the skull are easy and so are open mouth views. All of this without any personnel, in the same room!

SIZE 5 SIZE 4 SIZE 3 SIZE 2 SIZE 1148cm 120cm 96cm 76cm 60cm32–55kg 20–32kg 11–20kg 6.8–11kg 3.5–6.8kg

SURGICAL ACCESSORIES



SPECIFICATIONSMin. countertop area: 45.2 x 53.3cmChamber: diameter 28cm, depth 45.7cm, usable volume 24.6LTrays: Two large – 22.9cm x 38cm x 2.9cm Two small – 16.8cm x 38 cm x 2.9cmUnit weight: 44.9kgWater reservoir capacity: 5.3 LitresOverall length w/plug: 60.5cm Width: 45.2cm Overall height w/printer: 45.2cm

Midmark M11 UltraClave® Automatic SteriliserLet the Midmark M11 UltraClave do the work for you. Simply load it, set it and forget it. Select the cycle and the time automatically sets for you. Press “start” and the Midmark M11 fills with the correct amount of water. Once the sterilisation process is complete, the door opens automatically and quietly.

PULSE-AIR REMOVAL TECHNOLOGY - The M11’s steam-flush pressure-pulse air removal system is so efficient, that it can pass the air removal tests required on more complex vacuum steam autoclave systems. Thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilisation needs.

CONVENIENCE AT A GLANCE - The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilisation mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Temperature & pressure are not displayed during dry mode.

SAFETY FEATURES - If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilisation will not continue until you have attended to the unit.

EASE OF DRAINING & FILLING - For ease of draining and filling, the M11’s reservoir fill port and drain tube are in the front of the unit, not on top or in back.

VQ5581-11

Huge 24.6 litre chamber

FEATURES Steam-flush pressure-pulse air removal system that is so efficient it can pass the

air removal tests required on more complex vacuum steam steriliser systems Pre-programmed controls and easy

to view LCD display Convenient self-program controls provide

instrument processing flexibility Automatic-opening door ensures fast

instrument drying Front fill and drain tube provide easy access for

maintenance and water level monitoring

The Midmark M9 UltraClave® is specifically designed to meet your needs.The intuitive display and simple prompts, help you to easily select the cycle you need, whether it is for unwrapped items, pouches, packs or handpieces. Once the sterilization process is complete, the patented automatic-opening door quietly opens to dissipate steam, providing fast and efficient instrument drying. Simply load it, set it and forget it!

Midmark M9 UltraClave® Automatic Steriliser

SPECIFICATIONSMinimum countertop area: 38.9cm x 45.4cmChamber: Diameter 22.9cm, depth 38.1cm, usable volume 13.4LTrays: Two large 18.6 cm x 30.5 cm x 2.2 cm Two small – 14.3 cm x 30.5 cm x 2.2 cmUnit weight: 33.1 kgShipping weight: 36.7 kgWater reservoir capacity: 4.1LitresOverall length w/plug: 51.8cm Width: 38.9cm Overall height w/printer: 40.1cm

VQ5581-9

AUTOCLAVES



B23 B Class Autoclave

B60 B Class Autoclave

AUTOCLAVES

VQ5588

VQ5589

SPECIFICATIONS Measurements:

Overall length: 690mm Overall width: 505mm Overall height: 400mm Minimum countertop area:

560mm (D) x 505mm (W) Chamber:

Diameter: 236mm Depth: 530mm Usable volume: 23 litres

Trays 4 trays: 185mm x 440mm x 17mm Unit weight: 55kg Shipping weight: 60kg Water reservoir capacity: 4.5 litres

SPECIFICATIONS Measurements:

Overall length: 783mm Overall width: 680mm Overall height: 820mm (1600mm

with cabinet) Minimum countertop area:

800mm (D) x 680mm (W) Chamber:

Diameter: 350mm Depth: 622mm Usable volume: 59.9 litres

Trays 2 large trays: 310mm x 550mm x 25mm 2 small trays: 220mm x 550mm x 25mm Unit weight: 146kg Shipping weight: 172kg (245kg with cabinet) Water reservoir capacity: 4.5 litres

Electrical requirements:230VAC, 50/60Hz, single phase, 2400W

Safety Standards 93/42/CEE annex II, Medical Device class IIb CEI EN 61010-1 CEI EN 61010-2-40 CEI EN 61326-1

Electrical requirements:230VAC, 50/60Hz, single phase, 3300W

Safety Standards 93/42/CEE annex II, Medical Device

class IIb CEI EN 61010-1 CEI EN 61010-2-40 CEI EN 61326-1



AUTOCLAVES

Midmark Speed Clean Autoclave Cleaner A liquid concentrate in a 470ml bottle. Speedclean, autoclave cleaner. Recommended for use in Ritter (Midmark) sterilisers. Concentrated, simply dilute with distilled water, add to water reservoir and run a normal cycle. Removes hard water build-up and scale deposits.

VQ5581-1

Autoclave Packaging

Sterilisation Pouches

Gusseted Sterilisation Rolls

VQ5580-057130 Sterilisation Pouch 57 x 130 VQ5580-070260 Sterilisation Pouch 70 x 260 VQ5580-135280 Sterilisation Pouch 135 x 280 VQ5580-200360 Sterilisation Pouch 200 x 360

Autoclave Indicator Tape

Sterilisation Roll

VetQuip can now offer VetQuip branded Autoclave packaging at a reasonable price. All our pouches and rolls use high quality 60gsm Arjo paper ( made in France ) with steam sterilised indicator. Easy to use self-seal pouches and tape offer superior adhesion and seal.Call us for all your Packaging needs.

VQ5580-050 Sterilisation Roll 50mm VQ5580-100 Sterilisation Roll 100mm VQ5580-150 Sterilisation Roll 150mm VQ5580-200 Sterilisation Roll 200mm VQ5580-250 Sterilisation Roll 250mm

VQ5580-1950 Autoclave Indicator Tape 19mm VQ5580-2550 Autoclave Indicator Tape 25mm VQ5580-15100 Sterilsation Indicator Strips VQ5580-YBD Bowie Dick Test Pack

VQ5580-G100 Gusseted Sterilisation Roll 100mm x 100m VQ5580-G150 Gusseted Sterilisation Roll 150mm VQ5580-G200 Gusseted Sterilisation Roll 200mm x 100m VQ5580-G250 Gusseted Sterilisation Roll 250mm



SURGICAL LIGHTING

MediLED3The MediLED3 LED Light delivers a consistent colour temperature of 4300K with a CRI of 95, R9 95. This helps reveal the maximum perception of true tissue colours and makes the light one of the best LED lamps on the market.

Each MediLED3 light head is equipped with a turntable sterile handle which allows focus adjustment between 160mm-200mm.

A Lighting Control Knob located at the side of the light head gimbals allows the user to turn the light ON/OFF and adjust the intensity with ease. The clean and simple design of the light serves all diagnostic needs.

TECHNICAL SPECIFICATIONS Diameter of Light head (cm) 48.5cm Maximum Light Output Measured in 1m (lux), Ec 65,000lux Colour Temperature (Kelvin) 4,300K Colour Rendering Index (CRI) 95CRI Red Colour Index (R9) 95 Total Irradiance Ee (W / m2) 214.5 Radiant Power / Intensity Ee / Ec (mW / m2lux) 3.3 Light Field, d10 (cm) 18 Light Field, d50 (cm) 9.8 Pattern Size (cm) 16-20 Number of LEDs 24 Average LED Life (hours) 50,000 Power Consumption (W) 24

Mobile FloorstandVQ5511-M

Single Ceiling VQ5511-C

WallmountVQ5511-W

LIGHTINGCONTROL KNOB

TOUCH PAD CONTROL



VQ5512-C MediLED 4Single Ceiling Light -C44 MediLED 4Single CeilVQ5513 ing Light

SURGICAL LIGHTING

Printed in Taiwan, Mar. 2011 All rights reserved.Mediland Catalogue Ref. No. M2011Mar-E-01-V1

[email protected]

Mediland Enterprise CorporationNo. 75, Wenhwa 1st Rd., Kueishan Township,Taoyuan County 33382, Taiwan, R.O.C.Phone 886-3-328-9140Fax 886-3-328-8881

MediLED Duet Surgical Light

MediLED 4

MediLED 4F

MediLED 44

MediLED 44F

Configurations

NOTE: For more information, please contact your Mediland sales representative.

F: laminar airflow ceiling finish

The MediLED Duet Surgical Light with LED lighting source provides cool light, shadow-free illumination and nature white light for surgeries. Each lighthead is supported with arms systems; this will let you posi-tion the lightheads perfectly in order to maximize the surrounding space, allowing the medical staff to maneuver easily without obstructing the lighting. The compact design of MediLED Duet surgical light is a superior alternative to traditional two-headed lighting systems and is especially suitable for multiple clinical practices such as oral surgeries, dental procedures, dental implant prac-tices, plastic surgeries, ENT and general surgeries. This system is also adaptable to multi-media display and high definition cameras (optional features) which can further enhance its versatility.

Diameter of Lighthead (cm)

Maximum Light Output Measured in 1m (lux), Ec

Color Temperature (Kelvin)

Color Rendering Index (CRI)

Red Color Index (R9)

Applicable Working Distances from Lighthead

to Surgical Area (cm)

Total Irradiance Ee (W/m²)

Radiant Power/Intensity Ee/Ec (mW/m²lux)

Light Field, d10 (cm)

Light Field, d50 (cm)

Pa�ern Size (cm)

Number of LEDs

Average LED Life (hours)

Minimum Requirement for Ceiling Height (cm)

Power Consumption (W)

Lighthead Types Lighthead4Technical Data

61

100,000

4,300

95

95

330

3.3

18

9.5

18~30

36

50,000

260

36

Technical Specifications

80~140



SURGICAL LIGHTING

Burton AIM 100 LEDIntroducing Burton’s NEW AIM 100 LED, the most exciting revolution in diagnostic examination lighting.The AIM 100 LED uses the latest advances in state-of-the-art lighting technology, to achieve incredible performance, unsurpassed value and energy efficiency.

The AIM 100 LED provides 10% more illumination, than even the high performing AIM-50®. A 92 CRI rating produces very accurate color visibility, which is important for an accurate diagnosis. With 10 times greater (20,000 hours) lamp life than traditional light source products, you will save more than $1,000 in bulb replacements alone.

Additionally, the AIM 100 LED uses 55% less energy.

FEATURES109,000 Lux at 61cmColor temperature: 4300° KCRI (Color Rendering Index): 92Diameter of lighthead: 51 cm (20 in.)Light field diameter: 33 cm - 38 cm (13 in. - 15 in.)Depth of illumination: 137 cm (54 in.)Focusing: adjustable by rotating center handleNumber of LED modules: 3Light sources (LED): Light Emitting Diodes (LED)Rated life of LED lamp: 20,000 hoursMinimum ceiling height/maximum ceiling height: 2440 mm/3660 mm (8 ft./12 ft.)5-year limited warranty

Ceiling heights of more than 8’ may require an additional pole extension.

FloorstandVQ5518-LED

Wall Arm MountVQ5518-2LED

Single Ceiling VQ5518-1LED

Double CeilingVQ5518-3LED

Autoclaveable/Reusable Control HandleVQ5519-5

Aim 42” Extended Ceiling Mount Drop poleVQ5519-4



Our staff are committed to providing you personalised service and great products. Call VetQuip today on 1300 888 427

VetQuip’s Customer CommitmentVetQuip offers an extensive range of products and services to meet the specialised needs of veterinarians, universities, research facilities and zoos.

VetQuip is a veterinary distributor that specialises in supplying our customers, with an extensive range of

veterinary products from Anaesthesia, Monitoring, Lighting Orthopaedic equipment and much more.

With a comprehensive line of products, from a range of leading manufacturers, it is no wonder that

veterinarians trust VetQuip for the very best products and equipment for their practices.

If you are looking for a specialty item, specific piece of equipment or a hard to find item. Or if

you are interested in learning more about the products we have on offer, or would like to learn

more about how to use a particular product, let one of our skilled staff members help you find what

you are looking for.

All burton lights are backed with a five year factory warranty.

*conditions applySuper Exam 50® LEDThe Super Exam 50® LED delivers higher illumination in a precisely controlled beam. Longer life, lower energy consumption and versatility is where the Super Exam 50® LED really shines. The LED technology in this highly engineered optical system, delivers the precisely controlled natural white light that is so important for your examination to reach an accurate diagnosis. The exclusive K-arm technology delivers versatility and drift-free positioning. Utilising only 15 watts of power, it produces the light output equivalent to 50 watts of conventional lighting. That represents a 70% saving.

FEATURES Natural white light LED light module with 40,000 hour life High intensity of 39,000 Lux at 24” 4000 K color temperature CRI (Color Rendering Index) of 92 Universal input voltage Drift-free K-arm with 42” arm range

On Mobile Floor Stand VQ5521-2LED

Wall Mount VQ5521-3LED

SURGICAL LIGHTING

Ceiling Mount VQ5521-1LED

Table Mount VQ5521-4LED



SURGICAL LIGHTING

SPECIFICATIONSNo of LEDs: 6 White LEDsColor temperature: 5,500° KLight intensity at typical working distance: 80,000 lux (7,432 footcandles)LED life: 50,000 hoursWorking distance: 4 in (60.9 cm) to 40 in (100 cm)Spot size at working distance: 9 in (23 cm) to 11 in (28 cm)Electrical: Input: 100-240 V~, 50 Hz-60 Hz, 1.00 A maxPower cord: #18 AWG, 3-wire grounded cord set, 8’ (2.5 m) long

PHYSICAL DIMENSIONSWeight: Total wall mount: 17.90 lbs (8.12 kg) Total mobile stand: 44.85 lbs (20.34 kg) Total ceiling mount: 24.50 lbs (11.11 kg)Luminaire: Height: 13.74 in (34.9 cm) Width: 18.03 in (45.8 cm) Depth: 4.02 in (10.2 cm) Wall to luminaire center: 68.9 in (175 cm) Wall mount max. up/down: 37.4 in (95 cm)Mobile stand: Height: 68.9 in (175 cm)Mobile stand base: Length: 21.97 in (55.8 cm) Width: 22.24 in (56.5 cm) Height: 6.5 in (16.5 cm)Mobile stand max. up/down: 37.4 in (95 cm)Mobile stand to luminaire center: 37.4 in (95 cm)Ceiling to luminaire center: 68.9 in (175 cm)Ceiling mount max. up/down: 37.4 in (95 cm)Control box: Touchless on/off control with dimmingAccessory options: Disposable sheath #52630Warranty: 5-year limited

Phone VetQuip now on 1300 888 427

Replacement lamps are available for all lights featured and many other brands.

Contact our Biomedical department for lamp assistance and other servicing requirements.

Welch Allyn Green Series GS900 Procedure LightThis procedure light, featuring six LEDs, combines outstanding durability, extraordinary maneuverability, unparalleled spot quality and multiple mounting options.

FEATURES Six 5,500° K LEDs that provide a whiter,

brighter light than halogen. Less energy consumption for reduced

cost of ownership No bulb replacement for cost savings Combines outstanding durability,

extraordinary maneuverability, unparalleled spot quality and multiple mounting options.

Dimming feature Minimal heat dissipation and high

color temperature 5-year limited warranty

For further information please call 1300 888 427

Mobile StandW44906-M

Ceiling MountW44900-C

Wall MountW44900-W

Replacement Lamps

ORTHOPAEDICS

ORTHOPAEDICS VetQuip Veterinary

EVEROST ORTHOPAEDICS .........................................99–110

Lateral Stabilisation ......................................................................99-101

Tibial Tuberosity Advancement ................................................ 102-106

Internal Fixation .......................................................................... 107-110


ORTHOPAEDICS ORTHOPAEDICS

Isometric. Adjustable.Strong.From the engineers that delivered the first crimping system, snap-off bone anchors, cruciate needles,swaged-on monofilament and custom instruments.

FEATURES AND BENEFITS: Strong, Fast & Effective Placed at Isometric Sites More Uniform Tension Smooth Rotation Posts Reduced Surgery Time Less Inventory Adjustable to Desired Size Out Performs Monofilament

and Other Fibers* Many Applications Versatile Cost Effective Mechanically Tested High-Strength Minimal Elongation Available in USP #2 or #5 Possible Minimally Invasive surgery

Isometrically place OrthoZip Ti Posts

Place OrthoZip adjustable locking loop over posts

Pull on OrthoZip ends to tighten









Pull on OrthoZip ends to tightenOrthoZip Products

OrthoZip Rotax Posts Titanium posts provide smooth, stress-free surface for suture to rotate on Post heads keeps suture securely on post body Self tapping, Hex drive Available in many lengths

OrthoZip Made from UHMWPE (Ultra High Molecular Weight Polyethylene) orthopedic suture Available in USP #2 and #5 >2X the strength of standard fiber loops Blue tracer fiber for easy visability

Pre-sterile ready to use Many applications

Lateral Stabilization Very high strength with minimal elongation High grade medical certified materials

No knot, No crimp, No expensive instrumentation

OrthoZip Material

USP 2 - Single

OrthoZip Material

USP 2 - Double

OrthoZip Material

USP 5 - Single

OrthoZip Material

USP 5 - Double

Nylon 80lb Fiberwire

OrthoFiber

*Fiberwire is a registered trademark of Arthrex, OrthoFiber is a registered trademark of MWI. **Data collection for monofilament, Fiberwire & Orthofiber is from “Mechanicaltesting of orthopedic suture materials used for extra-articular stabilization of canine

Minnesota.”

Cyclic Tensioning Load Failure (N) Ultimate (Static) Load Failure (N)

cruciate ligament-deficient stifles College of Veterinary Medicine, University of


ORTHOPAEDICS

Diamond Crimping System

Tensioning Device E-CR002378

80lb Crimp Clamp - 15 pack S.CR12520

80lb Titanium Coated Crimp Clamp - 15 pack S.CR005586

40lb Crimp Clamp - 15 pack S.CR12515

40lb Titanium Coated Crimp Clamp - 15 pack S.CR005585

Extensive range of swaged-on monofilament/needles in stock

Pre-sterilised cruciate repair pack 80lb 3 x 80lb Crimp Clamps 2 x 80cm 80lb monofilament nylon

S.CRPACK80

Pre-sterilised cruciate repair pack 40lb 3 x 40lb Crimp Clamps 2 x 80cm 40lb monofilament nylon

S.CRPACK40

Diamond Crimping DeviceFEATURES & BENEFITS

Effortless perfect crimp every time Incremental, verifiable tension control Greater holding power than any other crimper Premium instrumentation with lifetime guarantees Highest grade medical materials No need for assistance during surgery Proven and tested Everost engineers are the original designers

Diamond Crimping Device E-CR005267

Everost Product RangeVetQuip is the Australasian distributor for Everost Veterinary Orthopaedics.For all orthopaedic enquiries, call the VetQuip team on 1300 888 427.



Swaged-on Cruciate Repair NeedlesS.CRLS80 80lb nylon on large cruciate needle - 6 pack S.CRMS80 80lb nylon on medium cruciate needle - 6 pack S.CRSS80 80lb nylon on small cruciate needle - 6 pack S.CRMS40 40lb nylon on medium cruciate needle - 6 pack S.CRSS40 40lb nylon on small cruciate needle - 6 pack Supplied sterile, ready for use.

Double Swaged-on Cruciate Repair NeedlesS.CRLS802 2/80lb nylon on large cruciate needle - 6 pack S.CRMS802 2/80lb nylon on medium cruciate needle - 6 pack S.CRSS802 2/80lb nylon on small cruciate needle - 6 pack S.CRMS402 2/40lb nylon on medium cruciate needle - 6 pack S.CRSS402 2/40lb nylon on small cruciate needle - 6 pack Supplied sterile, ready for use.

Swaged-on Straight NeedlesS.CRLST806 80lb nylon on large straight needle - 6 pack S.CRMST806 80lb nylon on medium straight needle - 6 pack S.CRSST406 40lb nylon on small straight needle - 6 pack

Everost NeedlesS.CRNDLSTP Straight needles - 6 pack 3 x 3” / 3 x 4” S.CRND-P Cruciate needles - 6 pack 2s, 2m, 2l S.CRNDL-S Cruciate needles - 6 pack - small S.CRNDL-M Cruciate needles - 6 pack - medium S.CRNDL-L Cruciate needles - 6 pack - large

Everost Monofilament Nylon SutureHard type monofilament nylon. Do not autoclave complete spool.

S.CR80040 40lb - 100yd spool S.CR80080 80lb - 100yd spool S.CR80100 100lb - 100yd spool

Individual lengths can be autoclaved

Everost Beaver Blade & HandleExcellent for removing the meniscus during cruciate ligament repair.

E-002544 Beaver handle - 10cm long E-002545 Beaver blades (Size 6400) - 12 pack

E-TTA003573 Bone Tunnel (4mm x 10mm) titanium E-TTA003134 Suture Button

ORTHOPAEDIC

ORTHOPAEDICS

Why use metal? Advanced biomaterials tailor-made to biodegrade.

• Clinically tested

• improved osteotomy healing scores vs. metal cages

• Engineered to provide adequate mechanical properties for safe bone healing

• Bioabsorption mimics that of natural bone healing

• Proprietary compounding of bioabsorbable materials & osteoconductive materials provides faster bone growth

• Cost comparable to titanium

• May be used in infected environments

• Radiolucent postoperative imaging

• Available in 6mm, 9mm, & 12mm sizes

• Interchangeable wings

12 Month Post Operative xorption X-ray courtesy of Matthew Barnhart DVM, MS, DACVS

855.EVEROST (383 7678) • [email protected] • www.everost.com



EVEROST ORTHOPAEDIC

Tibial Tuberosity Advancement (TTA)Xorption

Adaptta

The XORPTION line of cages, used in Tibial Tuberosity Advancements, are manufactured using a specially selected compound of proven bioabsorbable materials. Material selection for each of our bioabsorbable implants is the most critical part of the product design. Each implant is evaluated independently with special consideration given to where it will be installed, the type and amount of loads placed on the implant, the healing profile for the fixation and the number of cycles placed on the implant. To ensure the proper material selection our engineers need to fully evaluate the indication and all the above parameters. The XORPTION Cage shares many of the same benefits of the AdapTTA cage.

The Adaptta line of cages, used in Tibial Tuberosity Advancements, are manufactured using the highest grade of proven biocompatible metals. The innovative design provides adequate mechanical properties for safe and effective bone healing.

With the novel “quick clip” the surgeon is no longer constrained to a specific wing size. The Adaptta Cages allows the surgeon to pick the correct wing size for the patient and attach the wing onto the desired cage size.

ADVANTAGES OF XORPTION CAGE & QUICK CLIP: Made from high-quality bioabsorbable polymers Engineered to provide adequate mechanical properties for safe bone healing Bioabsorbable profile mimics natural bone healing No tissue reaction and easy removal if necessary Proprietary compounding of bioabsorbable materials with osteo-conductive

materials provides faster bone growth Available in 6mm, 9mm, and 12mm sizes with Interchangeable wings.

ADVANTAGES OF THE ADAPTTA WING: Interchangeable wings; choice made in surgery! 360 degree of wing freedom Available in biocomposites, titanium and stainless steel. Limited contact/less implant material Available in 8 sizes Proprietary surface finish

Why use metal? Advanced biomaterials tailor-made to biodegrade.

• Clinically tested

• improved osteotomy healing scores vs. metal cages

• Engineered to provide adequate mechanical properties for safe bone healing

• Bioabsorption mimics that of natural bone healing

• Proprietary compounding of bioabsorbable materials & osteoconductive materials provides faster bone growth

• Cost comparable to titanium

• May be used in infected environments

• Radiolucent postoperative imaging

• Available in 6mm, 9mm, & 12mm sizes

• Interchangeable wings

12 Month Post Operative xorption X-ray courtesy of Matthew Barnhart DVM, MS, DACVS

855.EVEROST (383 7678) • [email protected] • www.everost.com


ORTHOPAEDICS

TTA Forkless Plates STAINLESS STEELS.TTAXP3SS TTA Forkless SS plate 3-2 hole S.TTAXP4SS TTA Forkless SS plate 4-2 hole S.TTAXP53SS TTA Forkless SS plate 5-3 hole S.TTAXP5SS TTA Forkless SS plate 5-2 hole S.TTAXP6SS TTA Forkless SS plate 6-3 hole S.TTAXP7SS TTA Forkless SS plate 7-3 hole S.TTAXP8SS TTA Forkless SS plate 8-3 hole

TITANIUM

S.TTAXP3T TTA Forkless Ti plate 3-2 hole S.TTAXP4T TTA Forkless Ti plate 4-2 hole S.TTAXP53T TTA Forkless Ti plate 5-3 hole S.TTAXP5T TTA Forkless Ti plate 5-2 hole S.TTAXP6T TTA Forkless Ti plate 6-3 hole S.TTAXP7T TTA Forkless Ti plate 7-3 hole S.TTAXP8T TTA Forkless Ti plate 8-3 hole

CAGES WITH WINGSS.TTACC10523S TTA Cuttable Cage 10.5/23mm SSS.TTACC10523T TTA Cuttable Cage 10.5/23mm TiS.TTACC1226S TTA Cuttable Cage 12/26mm SSS.TTACC1226T TTA Cuttable Cage 12/26mm TiS.TTACC1626S TTA Cuttable Cage 16/26mm SSS.TTACC1626T TTA Cuttable Cage 16/26mm TiS.TTACC317S TTA Cuttable Cage 3/17mm SS S.TTACC317T TTA Cuttable Cage 3/17Ti

S.TTACC4517S TTA Cuttable Cage 4.5 x 17 SSS.TTACC4517T TTA Cuttable Cage 4.5x17 TiS.TTACC620S TTA Cuttable Cage 6/20mm SSS.TTACC620T TTA Cuttable Cage 6/20mm TiS.TTACC7520S TTA Cuttable Cage 7.5/20mm SSS.TTACC7520T TTA Cuttable Cage 7.5/20mm TiS.TTACC923S TTA Cuttable Cage 9/23mm SSS.TTACC923T TTA Cuttable Cage 9/23mm Ti

E-001887 TTA T Handle with Spacers E-004976 Cage Cutter Double Action E-TTA004677 TTA Starter Kit TI Complete E-TTA004678 TTA Starter Kit SS CompleteE-TTA005594 S/S Instrument Tray E-TTA005595 S/S Screw and Instrument Tray E-TTA222010 Adap TTA Wing Applicator Tool E-TTA253108 Tray, TTA Instrument E-TTA253109 Tray, TTA Implant E-TTA253110 Tray, TTA Screws E-TTAC10523A Absorbable Cage No wing 10.5x23mm E-TTAC10523S SS Cage No wing 10.5x23mmE-TTAC10523T Ti Cage No wing 10.5x23mmE-TTAC1226A Absorbable Cage No wing 12x26mm E-TTAC1226S SS Cage No wing 12x26mm E-TTAC1226T Ti Cage No wing 12x26mm E-TTAC1626S SS Cage No wing 16x26mm E-TTAC1626T Ti Cage No wing 16x26mm E-TTAC317A Absorbable Cage No wing 3x17mm E-TTAC317S SS Cage No wing 3x17mm E-TTAC317T Ti Cage No wing 3x17mm E-TTAC4518S SS Cage No wing 4.5x18mm E-TTAC4518T Ti Cage No wing 4.5x18mm

E-TTAC620A Absorbable Cage No wing 6x20mm E-TTAC620S SS Cage No wing 6x20mm E-TTAC620T Ti Cage No wing 6x20mm E-TTAC7520A Absorbable Cage No wing 7.5x20mm E-TTAC7520S SS Cage No wing 7.5x20mmE-TTAC7520T Ti Cage No wing 7.5x20mmE-TTAC923A Absorbable Cage No wing 9x23mm E-TTAC923S SS Cage No wing 9x23mm E-TTAC923T Ti Cage No wing 9x23mm E-TTAW11S Wing Only 11mm Stainless/Steel E-TTAW11T Wing Only 11mmTitanium E-TTAW13S Wing Only 13mm Stainless/Steel E-TTAW13T Wing Only 13mmTitanium E-TTAW15S Wing Only 15mm Stainless/Steel E-TTAW15T Wing Only 15mmTitanium E-TTAW17S Wing Only 17mm Stainless/Steel E-TTAW17T Wing Only 17mmTitanium E-TTAW19S Wing Only 19mm Stainless/Steel E-TTAW19T Wing Only 19mmTitanium E-TTAW9S Wing Only 9mm Stainless/Steel E-TTAW9T Wing Only 9mmTitanium

Everost TTA Instruments and Implants

EVEROST ORTHOPAEDIC



ORTHOPAEDIC

3.5mm Self Tapping Screws Stainless SteelS.TTA535010 3.5mm x 10mm Cortical Screws S.TTA535012 3.5mm x 12mm Cortical Screws S.TTA535014 3.5mm x 14mm Cortical Screws S.TTA535016 3.5mm x 16mm Cortical Screws S.TTA535018 3.5mm x 18mm Cortical Screws S.TTA535020 3.5mm x 20mm Cortical Screws S.TTA535022 3.5mm x 22mm Cortical Screws S.TTA535024 3.5mm x 24mm Cortical Screws S.TTA535026 3.5mm x 26mm Cortical Screws S.TTA535028 3.5mm x 28mm Cortical Screws S.TTA535030 3.5mm x 30mm Cortical Screws S.TTA535032 3.5mm x 32mm Cortical Screws S.TTA535034 3.5mm x 34mm Cortical Screws S.TTA535036 3.5mm x 36mm Cortical Screws S.TTA535038 3.5mm x 38mm Cortical Screws S.TTA535040 3.5mm x 40mm Cortical Screws

2.4mm Self Tapping Cortical Screws Stainless SteelS.TTA52410C 2.4 mm x 10 mm Cortical Screws S.TTA52412C 2.4 mm x 12 mm Cortical Screws S.TTA52414C 2.4 mm x 14 mm Cortical Screws S.TTA52416C 2.4 mm x 16 mm Cortical Screws S.TTA52418C 2.4 mm x 18 mm Cortical Screws S.TTA52420C 2.4 mm x 20 mm Cortical Screws S.TTA52422C 2.4 mm x 22 mm Cortical Screws S.TTA52424C 2.4 mm x 24 mm Cortical Screws S.TTA52426C 2.4 mm x 26 mm Cortical Screws S.TTA52428C 2.4 mm x 28 mm Cortical Screws S.TTA52430C 2.4 mm x 30 mm Cortical Screws S.TTA52432C 2.4 mm x 32 mm Cortical Screws S.TTA52434C 2.4 mm x 34 mm Cortical Screws S.TTA52436C 2.4 mm x 36 mm Cortical Screws S.TTA52438C 2.4 mm x 38 mm Cortical Screws S.TTA52440C 2.4 mm x 40 mm Cortical Screws

TitaniumS.TTA62410C 2.4 mm x 10 mm Cortical Screws S.TTA62412C 2.4 mm x 12 mm Cortical Screws S.TTA62414C 2.4 mm x 14 mm Cortical Screws S.TTA62416C 2.4 mm x 16 mm Cortical Screws S.TTA62418C 2.4 mm x 18 mm Cortical Screws S.TTA62420C 2.4 mm x 20 mm Cortical Screws S.TTA62422C 2.4 mm x 22 mm Cortical Screws S.TTA62424C 2.4 mm x 24 mm Cortical Screws S.TTA62426C 2.4 mm x 26 mm Cortical Screws S.TTA62428C 2.4 mm x 28 mm Cortical Screws S.TTA62430C 2.4 mm x 30 mm Cortical Screws S.TTA62432C 2.4 mm x 32 mm Cortical Screws S.TTA62434C 2.4 mm x 34 mm Cortical Screws S.TTA62436C 2.4 mm x 36 mm Cortical Screws S.TTA62438C 2.4 mm x 38 mm Cortical Screws S.TTA62440C 2.4 mm x 40 mm Cortical Screws

2.7mm Self Tapping Screws Stainless SteelS.TTA527006 2.7 mm x 6 mm Cortical Screws S.TTA527008 2.7 mm x 8 mm Cortical Screws S.TTA527010 2.7 mm x 10 mm Cortical Screws S.TTA527012 2.7 mm x 12 mm Cortical Screws S.TTA527014 2.7 mm x 14 mm Cortical Screws S.TTA527016 2.7 mm x 16 mm Cortical Screws S.TTA527018 2.7 mm x 18 mm Cortical Screws S.TTA527020 2.7 mm x 20 mm Cortical Screws S.TTA527022 2.7 mm x 22 mm Cortical Screws S.TTA527024 2.7 mm x 24mm Cortical Screws S.TTA527026 2.7 mm x 26 mm Cortical Screws S.TTA527028 2.7 mm x 28 mm Cortical Screws S.TTA527030 2.7 mm x 30 mm Cortical Screws S.TTA527032 2.7 mm x 32 mm Cortical Screws S.TTA527034 2.7 mm x 34 mm Cortical Screws S.TTA527036 2.7 mm x 36 mm Cortical Screws S.TTA527038 2.7 mm x 38 mm Cortical Screws S.TTA527040 2.7 mm x 40 mm Cortical Screws

TitaniumS.TTA62710 2.7 mm x 10 mm Cortical Screws S.TTA62712 2.7 mm x 12 mm Cortical Screws S.TTA62714 2.7 mm x 14 mm Cortical Screws S.TTA62716 2.7 mm x 16 mm Cortical Screws S.TTA62718 2.7 mm x 18 mm Cortical Screws S.TTA62720 2.7 mm x 20 mm Cortical Screws S.TTA62722 2.7 mm x 22 mm Cortical Screws S.TTA62724 2.7 mm x 24 mm Cortical Screws S.TTA62726 2.7 mm x 26 mm Cortical Screws S.TTA62728 2.7 mm x 28 mm Cortical Screws S.TTA62730 2.7 mm x 30 mm Cortical Screws S.TTA62732 2.7 mm x 32 mm Cortical Screws S.TTA62734 2.7 mm x 34 mm Cortical Screws S.TTA62736 2.7 mm x 36 mm Cortical Screws S.TTA62738 2.7 mm x 38 mm Cortical Screws S.TTA62740 2.7 mm x 40 mm Cortical Screws

TitaniumS.TTA63510 3.5 mm x 10 mm Cortical Screws S.TTA63512 3.5 mm x 12 mm Cortical Screws S.TTA63514 3.5 mm x 14 mm Cortical Screws S.TTA63516 3.5 mm x 16 mm Cortical Screws S.TTA63518 3.5 mm x 18 mm Cortical Screws S.TTA63520 3.5 mm x 20 mm Cortical Screws S.TTA63522 3.5 mm x 22 mm Cortical Screws S.TTA63524 3.5 mm x 24 mm Cortical Screws S.TTA63526 3.5 mm x 26 mm Cortical Screws S.TTA63528 3.5 mm x 28 mm Cortical Screws S.TTA63530 3.5 mm x 30 mm Cortical Screws S.TTA63532 3.5 mm x 32 mm Cortical Screws S.TTA63534 3.5 mm x 34 mm Cortical Screws S.TTA63536 3.5 mm x 36 mm Cortical Screws S.TTA63538 3.5 mm x 38 mm Cortical Screws S.TTA63540 3.5 mm x 40 mm Cortical Screws


ORTHOPAEDICS

EVEROST ORTHOPAEDIC

EVERGRAFT Osteoinductive Injectable Bone PuttyAn Everost Exclusive Bone Graft Product

KEY POINTS FOR EVEROST INJECTABLE BONE PUTTY 100% Real Bone in a putty carrier. Only Everost brings the

features of all natural bone graft in a convenient, easy to-use injectable putty carrier.

Osteoinductive Demineralized Bone Powder (aka. DBM)

Has native bone morphogenic proteins (BMPs)to stimulate new bone growth.

It is well documented that DBM contains a full complement of naturally present BMPs. These BMPs attract and activate patient stem cells to differentiate into bone-forming cells.

Osteoconductive Cancellous Bone Chips – Natures’ perfect scaffold to support bone growth

The architecture of cancellous bone (interconnected pores) facilitates migration of osteoblasts to form new bone and promote neo-osteogenesis. Fastest & most effective bone healing.

Studies have shown that allograft bone (from a donor) is as effective as autograft (patient bone) in bone healing .

Injectable - easily expressed from the syringe into any void or defect site.

Putty stays in the site even under vigorous irrigation. The DBM and cancellous chips are contained in situ.

The putty carrier washes away in the first few days, creating space for vascular ingrowth and inward migration of cells responding to the osteoinductive influence of the DB

Advantages over competing products: Consil/Velosity

Consil and Velosity are made of glass particles. The body can’t resorb glass.

Everost Injectable Bone Putty forms real new bone where glass is encapsulated by the body and forces bone to try and grow around it.

“Defects filled with mixtures containing 50% or 100% Corglaes® (bioactive glass) were less dense, contained less bone and more fibrous tissue than defects with allograft, autograft, or allograft idealized with Corglaes.”

More than just filling a bone void, Everost Injectable Bone Putty can regenerate new bone.

Advantages over not using any bone graft:

Using bone graft speeds healing.It takes many months for the body to make new bone again in an osteotomy site without a bone graft.Regarding TTA procedures… If no allograft is used, the TTA procedure relies solely on the hardware whilethe bone slowly heals. Best practice is to speed bone heal ing and fill osteotomy sites.

With no graft: “Osteotomy gap healing was considered complete (grade 4) in [only] 23 stifles (59%) at recheck. Mean follow up was 14.56 +/- 5.92 weeks.”

With Bone Allograft: “Final time to radiographic healing decreases to a mean of 9.4 weeks (range 4-20 weeks).”

E-CR004990



ORTHOPAEDIC

VQ9409-B3712 37 x 12mm TTA sagittal saw blade



VQ9409-B408 40 x 8mm TTA sagittal saw blade VQ9409-B408

VQ9409-B3712

Sagittal Saw Blades

Orthopaedic Battery Drill Kit

Autoclavable orthopaedic sagital saw kit, complete with 2 x rechargeable batteries, desk charger and storage case. Blades not included.

VQ9409-D

VQ9409-OS

Autoclavable orthopaedic drill, complete with stainless Jacobs chuck & Key, 2 x rechargeable batteries, desk charger and storage case.

Orthopaedic Battery Sagital Saw Kit



Internal Fixation/TraumaFracture TreatmentFracture treatment for animals started to take shape in the early 1940’s, but implants were never specifically designed for animals. The engineers at Everost are some of the first to concentrate on designing and manufacturing veterinary specific trauma implants. These implants fulfill the mechanical requirements and fit the patient. The Everost implants are made from the same implant quality 316LVM and Titanium that is used for production of human implants. Our modern manufacturing facilities are all FDA and/or ISO registered with very comprehensive and complete quality systems. We strictly follow all FDA, ASTM and ISO specifications when producing our implants. We guarantee you will be pleased with our implants and their quality or we will refund your purchase 100%.

KEY FEATURES: Manufactured using 316LVM and titanium Medical certified materials; proprietary surface finish Registered quality system FDA, ISO and ASTM standards strictly followed Anti-glare surface finish Custom implant design Manufactured in the USA, England & Germany.


ORTHOPAEDICS

ORTHOPAEDIC

Bosch Rechargeable TTA Orthopaedic Sagittal Saw

Includes Bosch variable speed cordless saw, bench top charger TTA sagittal blade hub, TTA sagittal 10mm saw blade, Saw blade key.

VQ9406(a)

Bosch Orthopaedic Autoclavebale Shroud

VQ9406-S

TTA Saw Blades

E-001665 30 x 6mm

E-001666 27 x 14mm

E-001667 50 x 10mm

E-001668 95 x 13mm

Bosch Rechargeable Orthopaedic Drill

Includes; Bosch drill, charger, stainless steel extension, 3/8” check and key.

VQ9408(a)

Bosch Orthopaedic Drill Autoclavebale Shroud

VQ9408-S

30.0

0

6.00 14.00

27.0

0



ORTHOPAEDIC

Instrument ContainersAutoclavable aluminium instrument containers. Great for storing or autoclaving a wide range of surgical instruments.

Small180mm (L) x 80mm (W) x 30mm (H)VQ3751 without latch

Medium260mm (L) x 120mm (W) x 60mm (H)VQ3752 without latch VQ3753 with latch

Large320mm (L) x 160mm (W) x 80mm (H)VQ3754 with latch

Silicone MatSilicone ‘finger’ mat helps to protect delicate instruments

180mm (L) x 80mm (W)VQ3751-1

Available in red or blue

Orthopaedic Drill BitsStandard ShankE-003268 1.1mm 45/22mm E-003269 1.5mm 70/22mm E-003271 2.5mm 95/50mm E-003272 2.7mm 85/50mm E-003273 3.2mm 130/50mm E-003276 4.5mm 130/50mm

Quick Coupling Synthes FitE-003277 1.1mm E-003278 1.5mm E-002252 2.0mm E-002253 2.5mm E-003279 2.7mm E-005547 3.2mm E-003281 3.5mm E-001600 4.0mm E-003282 4.5mm

Bone AnchorS.CR002399 2.7mm bone anchor (40lb) S.CR002400 3.5mm bone anchor (80lb) S.CR002401 4.5mm 2 hole bone anchor (80lb)

S.CR003524 2.7mm bone anchor titanium S.CR003525 3.5mm bone anchor titanium

Insertion shaft ‘snaps’ off leaving no sharp edges


ORTHOPAEDICS

Cerclage Wire

On autoclavable spool (1oz)

S.FF08016 16g / .048” S.FF08018 18g / .040” S.FF08020 20g / .032” S.FF08022 22g / .025” S.FF08024 24g / .020” S.FF08026 26g / .016”

Double Trocar K-wire

S.FF08035 .035” x 9” - 6 pack S.FF08045 .045” x 9” - 6 pack S.FF08054 .054” x 9” - 6 pack S.FF08062 .062” x 9” - 6 pack

Bone Pin Hand Driver

These bone pin hand drivers feature a cut-away viewing area

VQ65102(a) Mini bone pin hand driver Supplied with 5/16” Jacob’s chuck and key

I.O233500-00 Replacement 5/16” Jacob’s chuck and key

I.O233500-01 Replacement 5/16” Jacob’s key only

VQ65100 (a) Bone pin hand driver with pin extension Supplied with 3/8” Jacob’s chuck and key

I.O233501-00 Replacement 3/8” Jacob’s chuck and key

I.O233505-00 Replacement 3/8” Jacob’s key only VQ65104(a) S/S drill extension only. Jacob’s chuck and key not included.

Bone Pin Hand Drive Extension

Steinmann Bone Pins

S.FF08116 1/16” x 9” (1.6 x 228mm) S.FF08564 5/64” x 9” (2.0 x 228mm) S.FF08332 3/32” x 9” (2.4 x 228mm) S.FF08764 7/64” x 9” (2.8 x 228mm) S.FF08180 1/8” x 9” (3.2 x 228mm) S.FF08964 9/64” x 9” (3.5 x 228mm) S.FF08532 5/32” x 9” (4.0 x 228mm) S.FF08316 3/16” x 9” (4.8 x 228mm) S.FF08140 1/4” x 12” (6.0 x 300mm)

Smooth trocar/trocar pins

Trocar/Trocar Pins

S.FF08116P 1/16” x 9” (1.6 x 228mm) S.FF08564P 5/64” x 9” (2.0 x 228mm) S.FF08332P 3/32” x 9” (2.4 x 228mm) S.FF08764P 7/64” x 9” (2.8 x 228mm) S.FF08180P 1/8” x 9” (3.2 x 228mm) S.FF08964P 9/64” x 9” (3.5 x 228mm) S.FF08532P 5/32” x 9” (4.0 x 228mm) S.FF08316P 3/16” x 9” (4.8 x 228mm) S.FF08140P 1/4” x 12” (6.0 x 300mm)

Negative profile end threaded/trocar pins

End Threaded/Trocar Pins

S.FF08024

VQ65102(a)

VQ65100(a)

ORTHOPAEDIC

ORTHOPAEDICS

VetQuip Veterinary Surgical INSTRUMENTS

INSTRUMENT KITS ..................................................................112

SCALPEL HANDLES ................................................................113

SPEY HOOKS ..............................................................................113

FORCEPS ............................................................................114–117

TOWEL CLAMPS .......................................................................117

DRESSING AND TISSUE FORCEPS .....................118–119 WITH TUNGSTEN CARBIDE TIPS ................................................................129

SCISSORS ..........................................................................120–125 MICRO SCISSORS .....................................................................................124

BANDAGE SCISSORS ................................................................................124 SCISSORS WITH TUNGSTEN CARBIDE TIPS ......................................... 124-125

NEEDLE HOLDERS .......................................................126–128 NEEDLE HOLDERS WITH TUNGSTEN CARBIDE TIPS ...................................128

RETRACTORS ..................................................................130–132

ORTHOPAEDIC INSTRUMENTS ............................133–144


VETERINARY SURGICAL INSTRUMENTS

INSTRUMENT KITS

Ophthalmic Instrument KitInstruments are Quality German Manufactured & come with a 7 year fair Wear & Tear Warranty. This Kit represents just a small part of the huge range available. Kit Contains:

I-S110732-11 Iris Scissors Curved Flat 11.5cm 1I-N202051-13 Castroviejo Needle Holders 13cm 1I-F133051-12 Halsted Mosquito Forcep Curved 12cm 2I-E10440-12 Colibri Corneal Forceps 7.5cm 1I-E353405-09 Desmarres Chalazion Oval 20mm 1I-F120505-12 Micro Adson Forceps 12cm 1I-F120469-12 Adson Delicate Forceps 1:2 Teeth 12cm 1I-E353355-09 Castroviejo Suturing Forceps 1I-E343020-07 Graefe Eyelid Retractor 7cm 1I-T130976-09 Towel Clamps Schaedel 9cm 4VQ5402 Drape Eye 60x60 (Oval 3x8cm) 1

Canine Spay PackI-H100231-03 Scalpel Handle No.3 1I-S110271-17 Mayo Scissors Str 17cm 1I-S113105-18 Metz Scissors Cvd 18cm 1I-F120469-12 Adson Forceps 1:2 Teeth 1I-F130412-12 Mosq Forceps Cvd 12.5cm 2I-F133210-16 Rochester Carmalt Forceps Str 16cm 2I-SH1270565-20 Spey Hook Dog 1I-T131016-09 Backhaus Towel Clamp 9cm 4I-F303070-15 Allis Tissue Forceps 4:5 Teeth 15cm 2I-F120402-14 Tissue Forceps 1:2 Teeth 14.5cm 1I-F130431-14 Kelly Forceps Str 14cm 2I-N20077317T Needle Holder Olsen Hegar 17cm T/C 1VQ5403 Fen Drape 80cm x 80cm (8cm x 8cm Fen) 1VQ5404 Fen Drape 60cm x 90cm (3.5cm x 10cm Fen) 1VQ5410 Surgical Wrap 80cm x 80cm 1

Feline Spay PackI-H100231-03 Scalpel Handle No.3 1I-S110271-17 Mayo Scissors Str 17cm 1I-S113105-18 Metz Scissors Cvd 18cm 1I-F120469-12 Adson Forceps 1:2 Teeth 1I-F130412-12 Mosq Forceps Cvd 12.5cm 2I-F133210-16 Rochester Carmalt Forceps Str 16cm 2I-SH1270565-20 Spey Hook Cat 16cm 1I-T131016-09 Backhaus Towel Clamp 9cm 4I-F303070-15 Allis Tissue Forceps 4:5 Teeth 15cm 2I-F120402-14 Tissue Forceps 1:2 Teeth 14.5cm 1I-F130431-14 Kelly Forceps Str 14cm 2I-N20077317T Needle Holder Olsen Hegar 14cm T/C 1VQ5401 Fen Drape 60cm x 60cm (2.5cm x 5cm Fen) 1VQ5408 Surgical Wrap 60cm x 60cm 1

Instruments are Quality German Manufactured & are backed by a 7 year fair wear & tear warranty. Our Drapes are made from hard wearing 65% polyester, 35% cotton fabric & feature a 10cm overlay border around the fenestration area.

SCALPEL HANDLES

SPEY HOOKS


VETERINARY SURGICAL INSTRUMENTS VETERINARY SURGICAL INSTRUMENTS

I-H103001-00No.4Graduated in mm

StandardI-H100201-04No.4Solid

Standard I-H100231-03No.3Solid

I-H100231-04No.3Solid

Phone now on 1300 888 427 for more information and pricing

Talk to VetQuip about creating your personalised surgical instrument kits including laser engraving.

Surgical Instrument Kits

Snook Spey hookI-SH1270565-20 Dog 20cm x 5mm

I-SH1270365-20 Cat 16cm x 3mm

I-SH1270365-14 Feline Small Ball end 14cm

Halsted-Mosquito

Micro-Mosquito

Normal

Micro

FORCEPS

Bainbridge

Straight I-F133218-15 15 cm/6”

I-F133218-18 18.5 cm/7¼”

Curved I-F133219-15 15 cm/6”

I-F133219-18 18.5 cm/7¼”



I-F133050-09 9 cm/3½” I-F130407-10 10 cm/4” I-F133050-12 12 cm/4¾”

I-F133051-09 9 cm/3½” I-F130408-10 10 cm/4” I-F133051-12 12 cm/4¾”

I-F133055-09 9 cm/3½”

I-F130421-10 10 cm/4”

I-F130421-12 12 cm/4¾”

I-F130422-10 10 cm/4”

I-F130422-12 12 cm/4¾”

FORCEPS

Crile

Crile

Crile-Rankin

Crile-RankinDelicateDelicate



I-F130441-1414 cm/5½”

I-F133110-1414 cm/5½”

I-F130447-1616 cm/6¼” I-F133095-1818 cm/7”

I-F133111-1414 cm/5½”

I-F130448-1616 cm/6¼”

I-F133096-1818 cm/7”

I-F133115-1616 cm/6¼”

I-F133120-1818 cm/7”

I-F133116-1616 cm/6¼”

I-F133121-1818 cm/7”

I-F130442-1414 cm/5½”

Delicate

Rochester-Pean

Rochester-Pean

Rochester-Ochsner

Rochester-Carmalt

Straight I-F133210-16 16 cm/6¼”

I-F133210-20 20 cm/8”

Curved I-F133211-16 16 cm/6¼”

I-F133211-20 20 cm/8”

FORCEPS



Straight

Straight

Curved

Curved

I-F130511-1414 cm/5½”

I-F130511-1616 cm/6¼”

I-F133186-1414 cm/5½”

I-F133186-1616 cm/6¼”

Straight

I-F130515-1414 cm/5½”

I-F130512-1414 cm/5½”

I-F130512-1616 cm/6¼”

I-F133187-1414 cm/5½”

I-F133187-1616 cm/6¼”

I-F130511-1818 cm/7”

I-F130511-20 20 cm/8”

I-F133186-1818 cm/7”

I-F130512-1818 cm/7”

I-F130512-20 20 cm/8”

I-F133187-1818 cm/7”

Rochester-Carmalt

Straight I-F133210-16 16 cm/6¼”

I-F133210-20 20 cm/8”

Curved I-F133211-16 16 cm/6¼”

I-F133211-20 20 cm/8”

Foerster Aural Forcep

I-F143056-20 20 cm/8”

I-F143056-25 25 cm/10“

I-F363820-14 14 cm

SchaedelJones

I-T130982-05 5 cm/2”

I-T13-0982-09 9 cm/3½“

Backhaus

I-T131016-09 9 cm/3½“

I-T131016-11 11 cm/4¼“

I-T131016-13 13 cm/5”

I-T130976-09 9 cm/3½“

Fergusson

I-F133295-20 20 cm/8“

I-F133296-20 20 cm/8“

FORCEPS & TOWEL CLAMPS



Adson McIndoe

Standard StandardNarrow

Tissue

I-F120269-12 12 cm/4¾“

I-F120269-15 15 cm/6“

1:2 Teeth I-F120469-12 12 cm/4¾“

1:2 Teeth I-F120469-15 15 cm/6“

Standard I-F120271-15 15 cm/6“

1:2 Teeth

I-F120402-10 10 cm/4”

I-F120402-11 11.5 cm/4½”

I-F120402-13 13 cm/5”

I-F120402-14 14.5 cm/5½”

I-F120402-16 16 cm/6¼”

2:3 Teeth

I-F123020-13 13 cm/5”

I-F123020-16 16 cm/6¼”

4:5 Teeth

I-F123030-13 13 cm/5“

I-F123030-14 14.5 cm/5½“

I-F123030-16 16 cm/6¼“

I-F120201-10 10 cm/4”

I-F120201-11 11.5 cm/4½”

I-F120201-13 13 cm/5”

I-F120201-14 14.5 cm/5½”

I-F120201-16 16 cm/6¼”

I-F120201-18 18 cm/7”

I-F120221-11 11.5 cm/4½”

I-F120221-14 14.5 cm/5½”

DRESSING & TISSUE FORCEPS



DRESSING & TISSUE FORCEPS

Micro-Adson Adson-Brown

With platform

I-F123230-1212 cm/4¾“

7:7 Teeth

I-F120501-1212 cm/4¾“

9:9 Teeth

I-F120501-12-912 cm/4¾“

I-F120505-1212 cm/4¾“

Oehler, TCIris

I-F123235-1111.5 cm/4½“

1:2 Teeth

I-F123240-1111.5 cm/4½“

I-F123236-1111.5 cm/4½“

1:2 Teeth

I-F123241-1111.5 cm/4½“

0.5

I-F123365-14T14 cm/5½”



Standard – Curved

Standard – Straight

I-S110206-14 14.5 cm/5½“

I-S110206-16 16.5 cm/6½“

I-S110210-14 14.5 cm/5½“

I-S110210-16 16.5 cm/6½“

I-S110208-14 14.5 cm/5½“

I-S110206-20 20.0 cm/8“

I-S110201-10 10.5 cm/4¼“

I-S110201-13 13.0 cm/5“

I-S110201-14 14.5 cm/5½“

I-S110203-10 10.5 cm/4¼“

I-S110203-14 14.5 cm/5½“

I-S110203-15 15.5 cm/6“

I-S110203-16 16.5 cm/6½“

I-S110205-10 10.5 cm/4¼“

I-S110205-14 14.5 cm/5½“

I-S110205-16 16.5 cm/6½“

I-S110205-18 18.5 cm/7¼“

SCISSORS



SCISSORS

Mayo

Metzenbaum Baby Metzenbaum

Straight

I-S113060-15 15 cm/6“

I-S113060-16 16 cm/6¼”

I-S113060-19 19 cm/7½”

Curved

I-S113065-15 15 cm/6“

I-S113065-19 19 cm/7½”

Straight

I-S110349-11 11.5 cm/4½“

Straight

I-S110365-15 15 cm/6“

Curved

I-S110350-11 11.5 cm/4½“

Curved

I-S110366-15 15 cm/6“



Metzenbaum

Metzenbaum-Fino

Straight Blunt/Blunt I-S110351-14 14.5 cm/5½“

Straight Sharp/Sharp I-S110355-14 14.5 cm/5½“

Curved Blunt/Blunt I-S110356-14 14.5 cm/5½“

Curved Sharp/Blunt I-S110358-14 14.5 cm/5½“

Slender Pattern

I-S110427-14 14.5 cm/5½“

I-S110427-18 18 cm/7“

Slender Pattern

I-S110429-14 14.5 cm/5½“

Slender Pattern

I-S110428-18 18 cm/7“

I-S113100-18 18 cm/7“

I-S113100-23 23 cm/9“

I-S113105-18 18 cm/7“

I-S113105-23 23 cm/9“

SCISSORS



SCISSORS

Iris Stevens

Strabismus Littauer

Flat I-S110731-11 11.5 cm/4½“

Round I-S112030-11 11.5 cm/4½“

Curved I-S113381-11 11.5 cm/4½“

I-S110935-14 14 cm/5½”

Flat I-S110732-11 11.5 cm/4½“

Round I-S112035-11 11.5 cm/4½“

With large rings

I-S113361-10 10 cm/3¾”

Spencer

Normal I-S113395-11 11 cm/4¼”

Angled I-S113396-11 11 cm/4¼”

Straight I-S 110927-13 13 cm/5”

Normal I-S110925-09 9 cm/3½”

Angled I-S113390-09 9 cm/3½”



Bandage ScissorsWestcott

I-S113520-12 12 cm/5”

MICRO SCISSORS

Standard, TC

Straight I-S113590-16T 16 cm/6¼“

SCISSORSwith Tungsten Carbide Tips

I-S212003-14 Blue 14.5 cm/5¾“

I-S210310-18 Black 18 cm/7“

I-S212006-14 Bright Pink 14.5 cm/5¾“

I-S212010-18 Red 18 cm/7“

I-S212011-18 Blue 18 cm/7“

Iris, TC

Straight I-S111085-11T 11.5 cm/4½”

Curved I-S111086-11T 11.5 cm/4½”

Ragnell (Kilner), TC

I-S111095-12T 12 cm/4¾”



Ragnell (Kilner), TC

SCISSORSwith Tungsten Carbide Tips

Mayo, TC Mayo-Stille, TC

Metzenbaum , TC

Straight I-S113610-14T 14.5 cm/5¾“

I-S1113610-17T 17 cm/6¾“

Straight I-S113620-15T 15 cm/6“

Curved I-S113615-14T 14.5 cm/5¾“

I-S113615-17T 17 cm/6¾“

Curved I-S113625-15T 15 cm/6“

Straight I-S113655-14T 14.5 cm/5¾“

I-S113655-18T 18 cm/7“

Curved I-S113660-14T 14.5 cm/5¾“

I-S113660-18T 18 cm/7“

Goldman- Fox, TC

Straight I-S111081-13T 13 cm/5”

Curved I-S111082-13T 13 cm/5”



Derf Crile-Wood

Mayo-HegarDelicate

Mayo-Hegar

I-N200427-12 12 cm/4¾”

I-N200497-16 16 cm/6¼”

I-N200491-14 14 cm/5½”

I-N200491-24 24 cm/9½”

I-N200491-18 18 cm/7”

I-N200491-16 16 cm/6¼”

I-N200451-18 18 cm/7”

NEEDLE HOLDERS



NEEDLE HOLDERS

Mathieu Olsen-Hegar

Gillies CastroviejoWith lock

I-N200617-14 14 cm/5½”

I-N200617-17 17 cm/6¾”

I-N200565-12 12 cm/4¾”, Mini

I-N200565-14 14 cm/5½”

I-N200565-16 16 cm/6¼”

Serrated jaws I-N200570-16 16 cm/6¼”

I-N202051-13 13 cm/5¼”



Derf, TC

Mayo-Hegar, TC

Olsen-Hegar, TC

Mini profile 0.4 I-N200733-12T 12 cm/4¾”

0.5 I-N200743-14T 14 cm/5¼”

I-N200743-16T 16 cm/6¼”

I-N200743-18T 18 cm/7”

I-N200743-20T 20 cm/8”

Mini profile 0.4 I-N200773-14T 14 cm/5½”

I-N200773-16T 16 cm/6¼”

I-N200773-17T 17 cm/6½”

I-N200773-19T 19 cm/7½”

NEEDLE HOLDERSwith Tungsten Carbide Tips

VetQuip is committed to providing the Australian Veterinary industry with quality products and services. Through our relationship with manufacturers and our dedication to

sourcing globally recognised leading brands, VetQuip continues to supply

the latest instruments and equipment at competitive prices.

Committed to Quality




If you can’t find what you’re looking for please call

us on 1300 888 427

VetQuip’s manufacturer in Germany have a

huge range of General and Specialty instruments including a complete line of

Left Handed instruments.

Can’t find the Instrument you are looking for?

for detailed product information, specials and to view the complete range of products visit us at:

VetQuip Online

www.vetquip.com.au

Crile11 x 4 mm

19 x 6 mm

Skin Hook

I-R153005-11 11 cm/4¼”

Sharp I-R150201-03 16 cm/6¼”

Blunt I-R153115-16 16 cm/6¼”

Blunt I-R153116-16 16 cm/6¼”

Blunt I-R153117-16 16 cm/6¼”

Mini-Langenbeck Cushing Senn-Miller

I-R153170-16 16 cm/6¼”

12mm I-R153176-20 20 cm/8”

7 x 8.5 mm Sharp I-R150267-16 16 cm/6¼”

7 x 8.5 mm Blunt I-R150268-16 16 cm/6¼”

RETRACTORS



RETRACTORS

Buckley Jansen

WeitlanerOpening 35 mm

I-R153465-06 6 cm/2½”

Blunt I-R153481-10 10 cm/4 mm

Blunt 2:3 Teeth I-R153491-10 10.5 cm/4¼”

Sharp3:4 Teeth

I-R153495-14 14 cm/5½”

I-R153495-16 16.5 cm/6½”

I-R153495-18 18 cm/7”

I-R153495-20 20 cm/8”



I-R153815-00

Balfour 180 mm

70 mm x 35 mmLateral blade

45 mm x 80 mm1 central blade ref.15-3830-00

Single bar I-R153805-00

Double bar I-R153806-00

Balfour-Baby90 mm

24 x 20 mm

27 mm

Baby GelpiGelpi

I-R153665-09 9 cm/3½”

I-R153665-11 11.5 cm/4½”

I-R153665-16 16 cm/6¼”

I-R153665-18 18 cm/7”

RETRACTORS

I-R153660-09 9 cm/3½”



Balfour-Baby

Williger Putti

300 gm/10½ oz ø 26 mm I-O230301-01 24 cm/9½”

400 gm/14 oz ø 30 mm I-O230301-03 24 cm/9½”

340 gm/12 oz ø 28 mm I-O230301-02 24 cm/9½”

I-O233230-30 30 cm/12”

I-O233235-27 27 cm/10½”

Mead320 gm ø 26 mm Solid I-O233070-17 17 cm/6¾”

ORTHOPAEDICMallets & Bone Files



Trochlear Excision Arthroplasty

Miller-Colburn

6 mm

5 mm

6 mm

5 mm

I-O233250-17 17 cm/6½”

Double ended, plain serrations I-O230591-02 18.5 cm/7¼”

I-O233270-17 17 cm/6½”

Double ended, plain serrations I-O230591-04 18 cm/7”

ORTHOPAEDICNasal Rasp & Bone Files



Gigli

Volkmann

Handle I-O233355-00

Fig. 0000 I-O230405-40 17 cm/6¾”

Fig. 00 I-O230405-20 17 cm/6¾”

Fig. 1 I-O230405-01 17 cm/6¾”

Fig. 3 I-O230405-03 17 cm/6¾”

Fig. 000 I-O230405-30 17 cm/6¾”

Fig. 0 I-O230405-10 17 cm/6¾”

Fig. 2 I-O230405-02 17 cm/6¾”

Fine, 6 wires twisted

I-O233350-40 40 cm/16”

I-O233350-50 50 cm/20”

ORTHOPAEDICWire Saws & Bone Curettes



Wotton

Osteotomes

8 mm I-O233710-13 13.5 cm/5¼”

10 mm I-O233711-13 13.5 cm/5¼”

Gouges

12 mm I-O233722-13 13.5 cm/5¼”

14 mm I-O233723-13 13.5 cm/5¼”

12 mm I-O233712-13 13.5 cm/5¼”

14 mm I-O233713-13 13.5 cm/5¼”

Chisels

8 mm I-O233715-13 13.5 cm/5¼”

10 mm I-O233716-13 13.5 cm/5¼”

12 mm I-O233717-13 13.5 cm/5¼”

14 mm I-O233718-13 13.5 cm/5¼”

16 mm I-O233714-13 13.5 cm/5¼”

Periosteal ElevatorFerrozell handle

Ferrozell handle

6mm I-O234555-18 18 cm/7”

3mm I-O234560-18 18 cm/7”

ORTHOPAEDICBone Osteotomes, Chisels, Gouges & Elevators



Bone Lever Mini-Hohmann

Hohmann

I-O234585-14 14 cm/5½”

5 mm I-O234590-15 15 cm/6”

6 mm I-O234610-16 16 cm/6¼”

8 mm I-O234611-16 16 cm/6¼”

8 mm I-O234620-00 22 cm/8¾”

18 mm I-O234625-00 23.5 cm/9¼”

ORTHOPAEDICBone Levers



Bone Reduction Forceps

Reposition Forceps

Stepped tips I-O234755-09 9.5 cm/3¾”

I-O234800-20 20 cm/8”

I-O234830-15 15 cm/6”

I-O234760-13 13.5 cm/5½”

ORTHOPAEDICReposition & Reduction Forceps



Bone Fragment Forceps

Bone Holding Forceps

10 Teeth Serrated I-O234805-12 12.5 cm/5”

14 Teeth Serrated I-O234805-14 14 cm/5½”

I-O235005-16 16 cm/6¼”

I-O234790-00 16 cm/6½”

I-O234825-16 16 cm/6¼”

ORTHOPAEDICBone Holding & Fragment Forceps



Dingmann

Standard I-O234885-18 18.5 cm/7¼”

ORTHOPAEDICBone Holding & Reduction Forceps & Clamps

Gerster - Lowmann1 x 2 jaws

Verbrugge

Serrated jaws I-O234985-18 18 cm/7”

I-O234985-24 24 cm/9½”

KernWith ratchet

I-O234950-12 12 cm/4¾”

I-O234950-21 21 cm/8¼”

I-O234950-23 23 cm/9”

Special mini I-O235075-08 8.5 cm/3¼”

I-O235075-22 22 cm/8¾”



Friedmann Micro-FriedmannDelicate

Jansen RuskinDelicate

I-O230902-14 14 cm/5½”

I-O235175-18 18 cm/7“

I-O235177-18 18 cm/7“

Curved 2 x 6 mm bite I-O235141-15 15 cm/6“

4mm I-O235276-15 15 cm/6“

2mm I-O235280-18 17.5 cm/7“

4mm I-O235281-18 17.5 cm/7“

6mm I-O235282-18 17.5 cm/7“

2mm I-O235285-20 20 cm/8“

Straight

ORTHOPAEDICBone Rongeur Forceps



Liston Cleveland

Mc Indoe Ruskin-Liston

Straight I-O235420-14 14 cm/5½“

Curved I-O235425-14 14 cm/5½“

Straight I-O235420-19 19 cm/7½“

I-O235490-17 17.5 cm/7“

I-O235435-15 15 cm/6“

Straight I-O231051-18 18.5 cm/7¼“

Curved I-O231052-18 18.5 cm/7¼“

ORTHOPAEDICBone Cutting Forceps



Wire Twister, TC Wire Twister/ Cutter, TC

I-O230621-18T 18 cm/7“

I-O230621-20T 20 cm/8“

Holding forceps for cerclage wire, with lateral jaws to avoid wire slipping off

I-O235505-17T 17 cm/6¾“

ORTHOPAEDICWire Twisting Instruments with Tungsten Carbide Inserts

ORTHOPAEDICWire Twisters & Wire Cutting Pliers

Wire Cutting PliersWire Twister

For bending and cutting

I-O235580-15 15 cm/6“

I-O235710-17 17 cm/6½“

With side cutter

I-O235715-17 17 cm/6½“

I-O235715-12 12.5 cm/5“



I-O235785-18T 18 cm/7“

For up to1.6 mm

I-O235790-14T 14 cm/5½“

I-O235790-16T 16 cm/6¼“

I-O235790-18T 18 cm/7“

for soft wires up to ø3 mm

for hard wires up to ø2.2

I-O235801-16T 16 cm/6½“

I-O235801-18T 18 cm/7“

I-O235801-22T 22 cm/8¾“

ORTHOPAEDICWire Cutting Pliers with Tungsten Carbide Inserts

I-O235910-28 28.5 cm/11¼“

I-O23-5910-30 30.5 cm/12“

Cerclage wire passer I-O235940-00

ø 45 mm I-O235945-00

ORTHOPAEDICBone Wire Guides




OFFICE USE ONLY:

Date Received: __________________________________ Processed By: ________________________ Invoice No: ________________

ORDER FORMPHONE: 1300 888 427 OR 02 9899 6666 FAX: 02 9899 4911 E-MAIL: [email protected] VISIT: www.vetquip.com.au

CUSTOMER DETAILS: __________________________________________________________________________________________________________

__________________________________________________________________________________________________________

__________________________________________________________________________________________________________

CONTACT NAME: _______________________________________________________ PHONE: ___________________________________

PURCHASE ORDER NO: __________________ _______________________________________________________________________________________

CODE NO.: DESCRIPTION: QTY:

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

_________________ __________________________________________________________________________ ____________

COMMENTS: _________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________


PHONE 1300 888 427EMAIL [email protected] www.vetquip.com.au

Date post:	24-Mar-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

2016-17 EQUIPMENT AND INSTRUMENT CATALOGUE … · 2016-17 EQUIPMENT AND INSTRUMENT CATALOGUE The...

Documents