2016 - 2017 Kolpin Product Catalog

SINCE 1943.SINCE 1943.SINCE 1943.SINCE 1943.SINCE 1943.2016

CATALOG

2017PRODUCT

In 1943, an avid outdoorsman followed his instincts and opened a small sewn-goods operation in central Wisconsin.

A hunter, archer, a sportsman, Howard Kolpin began his company as a means to make products he could use while pursuing his favorite pastimes.

Today this tradition lives on through Kolpin’s dedicated team of avid sportsman. Whether we are developing a new, innovative idea such as the Kolpin High Rise Snow Plow, or taking an existing product and simply making it better, as we have with the Kolpin Stronghold Gun Boot, we are committed to earning your trust and confi dence through the highest quality products and service.

As a true sportsman we understand your dedication to carrying on and passing on outdoor traditions. Our passion to make your outdoor traditions more enjoyable stems from a true passion and respect for this great lifestyle.

Thanks for choosing Kolpin as your trusted partner in your outdoor journey.

KOLPIN STRONGHOLD™ SERIES Pgs. 4-7

GUN BOOTS & MOUNTS Pgs. 8-12

SAW BOOT/PRESS & FUEL PACKS Pgs. 13-14

RHINO GRIPS® Pgs. 15-20

GUN CARRIERS & GEAR SYSTEM Pgs. 21-23

AUDIO & LED LIGHTS Pgs. 24-25

SOFT LUGGAGE Pgs. 26-28

HARD LUGGAGE Pgs. 29-33

BASKET RACKS & UTV STORAGE Pgs. 34-37

PLOW SYSTEMS & ACCESSORIES Pgs. 38-45

WINCH SYSTEMS Pgs. 46-50

DIRT WORKS & HITCHES Pgs. 50-56

ACCESSORIES Pgs. 57-62

UTV ROOFS Pgs. 63

MORE INFORMATION ON OUR PRODUCTS AT: KOLPIN.EU

UTV Compatible

ATV Compatible

Pickup Truck Compatible

Utility Gear Rail Compatible

Made in the USA

WWW.KOLPIN.EU 3

4 WWW.KOLPIN.EU

1) CHOOSE YOUR GUN BOOT

GUN BOOT® SYSTEMS® SYSTEMS®

2) CHOOSE YOUR MOUNTBUILD YOUR PERFECT SETUP

IN TWO EASY STEPS

WWW.KOLPIN.EU 5 WWW.KOLPIN.EU PB

6 WWW.KOLPIN.EU

KOLPIN STRONGHOLD™ GUN BOOT » Features the largest and most protective interior space of all Kolpin Gun Boot cases » Secures virtually all models of firearms up to 52” (132cm) in length along with bi-pods and optics » For use with Kolpin Stronghold Auto Latch Mount System (KOL20710) to attach to any Off Road Vehicle (sold sepa-rately) » Single handed lid opening for quick access along with locking capability

KOL20705 Impact model » Includes a removable, shock absorbing foam Impact liner KOL20700 Transport model » Includes a separate premium fully zippered soft carrying gun case that fits within the hard case instead of the stan-dard Impact liner » Premium case has 2 separated storage compartments for additional gear to support hunting and shooting » Spacious interior includes customizable foam inserts to limit firearm movement providing the ultimate in protec-tion, fit & convenience

NEW

Mount sold separately

KOLPIN STRONGHOLD™ GUN BOOT » Features the largest and most protective interior space of all

Kolpin Gun Boot® cases » Secures virtually all models of firearms up to 52” in length

along with bi-pods and optics » For use with Kolpin Stronghold Auto Latch Mount System

(KOL20710) to attach to any Off Road Vehicle (sold separately)

» Single handed lid opening for quick access along with lock-ing capability

KOL20705 Impact™ modelIncludes a removable, shock absorbing foam Impact™ liner

KOL20700 Transport™ model » Includes a separate premium fully zippered soft carrying gun

case that fits within the hard case instead of the standard Impact™ liner

» Premium case has 2 separated storage compartments for additional gear to support hunting and shooting

» Spacious interior includes customizable foam inserts to limit firearm movement providing the ultimate in protection, fit & convenience


» Single handed lid opening for quick access along with lock-ing capability

»

»

WWW.KOLPIN.EU

NEWNEW

KOLPIN STRONGHOLD™KOLPIN STRONGHOLD™KOLPIN STRONGHOLD SERIES™ SERIES™


WWW.KOLPIN.EU 7 WWW.KOLPIN.EU PB

KOLPIN STRONGHOLD™ ICE AUGER BOOT » Features a durable protective shell that you expect from the Kolpin Strong-hold Boot line » Universal Tubular design secures stan-dard length 8” (20cm) and 10” (25cm) Gas and Electric Augers » For use with the Kolpin Stronghold Auto Latch Mount System to attach to any Off Road vehicle (sold separately) » Integrated tie down locations for addi-tional securing durable straps securely hold the auger while allowing quick access in the cold » Integrated handle for easy transportKOL20730

KOLPIN STRONGHOLD™ ICE ROD BOOT » Features a durable protective shell that you expect from the Kolpin Strong-hold Boot line » Compact design secures up to 6 rod combos up to 36” (91cm) in length » For use with the Kolpin Stronghold Auto Latch Mount System to attach to any Off Road vehicle (sold separately) » Integrated tie down locations for addi-tional securing durable latches allow quick access in the cold along with locking capability » Includes a removable, shock absorb-ing foam Impact liner KOL20735

KOLPIN STRONGHOLD AUTO LATCH MOUNT » For use with the Kolpin Strong-hold line of products » Auto-latching design pro-vides quick and secure Kolpin Strongholdproduct attachment to your ORV » Bracket is made from rugged high impact, reinforced nylon and coated steel » Precision angle adjustment for a custom fit » Universally fits most ATV tu-bular racks and UTV beds or to any flat (drillable) surface » Compatible with Polaris com-posite ATV racks / UTV bed rails using the Polaris Lock & Ride System with (2) KXP Plungers (sold separately)KOL20710

NEW

The Universal mount attaches to any ATV or UTV and can be used with any products from the Kolpin Stronghold Series

KOLPIN STRONGHOLD™ ICE AUGER BOOT

» Features a durable protective shell that you expect from the Kolpin Strong-hold™ Boot line

» Universal Tubular design secures stan-dard length 8” and 10” Gas and Electric Augers

» For use with the Kolpin Stronghold™ Auto Latch Mount System to attach to any Off Road vehicle (sold separately)

» Integrated tie down locations for addi-tional securing durable straps securely hold the auger while allowing quick access in the cold

» Integrated handle for easy transport

KOL20730

KOLPIN STRONGHOLD™ ICE ROD BOOT

» Features a durable protective shell that you expect from the Kolpin Strong-hold™ Boot line

» Compact design secures up to 6 rod combos up to 36” in length

» For use with the Kolpin Stronghold™ Auto Latch Mount System to attach to any Off Road vehicle (sold separately)

» Integrated tie down locations for addi-tional securing durable latches allow quick access in the cold along with locking capability

» Includes a removable, shock absorb-ing foam Impact™ liner

KOL20735

KOLPIN STRONGHOLD™ PISTOL BOOT

» Features a durable protective shell that you expect from the Kolpin Stronghold™ Boot line

» Secures virtually all handguns up to 16” in length along with bi-pods and optics

» For use with the Kolpin Stronghold™ Auto Latch Mount System to attach to any Off Road Vehicle

» Single handed lid opening for quick access along with locking capability

» Includes a removable, shock absorbing foam Impact™ liner

KOL20720

KOLPIN STRONGHOLD AUTO LATCH MOUNT

» For use with the Kolpin Strong-hold™ line of products

» Auto-latching design pro-vides quick and secure Kolpin Stronghold™ product attach-ment to your ORV

» Bracket is made from rugged high impact, reinforced nylon and coated steel

» Precision angle adjustment for a custom fit

» Universally fits most ATV tu-bular racks and UTV beds or to any flat (drillable) surface

» Compatible with Polaris® com-posite ATV racks / UTV bed rails using the Polaris® Lock & Ride® System with (2) KXP Plungers (sold separately)

KOL20710

KOLPIN STRONGHOLD AUTO LATCH MOUNT

The Universal mount attaches to any ATV or UTV and can be used with any products from the Kolpin Stronghold™ Series

KOLPIN STRONGHOLD™ICE ROD BOOT » Features a durable protective shell that you expect from the Kolpin Strong-hold Boot line» Compact design secures up to 6 rod combos up to 36” (91cm) in length» For use with the Kolpin StrongholdAuto Latch Mount System to attach to any Off Road vehicle (sold separately)» Integrated tie down locations for addi-tional securing durable latches allow quick access in the cold along with locking capability» Includes a removable, shock absorb-ing foam Impact liner KOL20735

NEWNEW

Boot line

Auto Latch Mount System to attach to any Off Road Vehicle

ONE MOUNT.

MULTIPLE ATTACHMENTS.

LIMITLESS CONVENIENCE.

NEWNEW

ONE MOUNT. MULTIPLE ATTACHMENTS. LIMITLESS CONVENIENCE.

KOLPIN STRONGHOLD™

NEWNEW NEWNEW

WWW.KOLPIN.EU 7

8 WWW.KOLPIN.EU

Impact Liner in Gun Boot

Mossy Oak® Breakup™

BOOTTECTOR®

BRACKET » Fits Kolpin® Gun Boot® IV, Gun

Boot® 6.0 & Saw Boot cases only (sold separately)

» Compact design provides more room on ATV rack

» Lightweight & extremely durable » Mounts to nearly all ATV racks » Adjusts without the use of any

tools » Offers precision gun angle adjust-

ability » Compatible with the Kolpin® Utili-

ty Gear Rail System (KOL26400)

KOL20035

GUN BOOT® LOOP BRACKET

» Fits Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only (sold separately)

» Universal fit mounting system will ac-commodate nearly all ATV racks

» All-metal constructed loop bracket » Bracket can be adjusted to multiple

angle positions between 0° & 45° » Rubber coated ring holds your Gun

Boot® securely » Locking pin prevents additional move-

ment & vibration when bouncing over rugged terrain

» Compact design provides more room on ATV racks

» Can also be mounted to the bed rail of a UTV or to any flat (drillable) surface

KOL20032

UNIVERSAL GUN BOOT®

/SAW BOOT BRACKET » Fits Kolpin® Gun Boot® IV, 4.3, 6.0 cas-

es and Saw Boot only (sold separately) » Universal bracket fits most ATV tubular

steel racks or UTV frames up to 2” (51,cm) diameter (Also fits square tubing)

» All metal constructed loop bracket » Bracket can be adjusted to multiple

angle positions between 0° and 45° » Rubber coated ring holds your Gun

Boot® case securely » Bracket design lets you utilize your

entire ATV rack

KOL20200

GUN BOOT® IV » Most popular & versatile Gun Boot® case for over 10

years » Provides ample room for 50mm scopes & even rifles

with slings attached or shotguns up to 51” (130cm) in length

» Ergonomically designed handle & molded attach-ment points for a sling

» Designed to accommodate left & right hand bolt action rifles & shotguns

» Utilizes all existing Gun Boot® IV brackets (sold separately)

» Compatible with the Utility Gear Rail System (KOL26400 - see pgs. 22-23)

Impact™ model (KOL20051, KOL20061, KOL20071) » Includes a removable 2 piece velcro, shock absorbing foam &

nylon Impact™ liner that provides superior interior protection

GUN BOOT® IVKOL20061 Mossy Oak® BUKOL20071 Realtree® APKOL20051 Black Impact™

KOL20050 Black Impact™ (5-pack)

GUN BOOT ® IV® IV® IV

Black

Mossy Oak

Realtree® AP

IMPACT II LINER GUN BOOT IVKOL24042

WWW.KOLPIN.EU 9

GUN BOOT®: ADDITIONAL ACCESSORIES

GUN BOOT® IV ONE PIECE BRACKET » Fits Kolpin® Gun Boot® IV & Gun Boot® 6.0 cases only » Mounts quickly to either side of your tubular ATV rack » Metal wire pin lock keeps Gun Boot® case in place

to prevent vibration & movement » Pre-set angle design is a perfect fit for intermediate

& smaller sized ATV’s » Gun Boot® IV & Gun Boot® 6 case sold separately

KOL20029

GUN BOOT® POUCH » Constructed of water resistant, durable 600 denier nylon » Holds 1 box of rifle or shot gun shells for fast and easy

access » Pocket dimensions: 2”D x 5”H x 6”W

(5,1cm D x 12,7cm H x 15,2cm W) » Easy installation, no tools required » Velcro® Closure with safety flap for complete protection » Elastic material stretches to fit Gun Boot® IV, 4.3 or

Gun Boot 5

KOL89520 BlackKOL89521 Realtree® AP

GUN BOOT® POUCH» Constructed of water resistant, durable 600 denier nylon

KOL20053 Bracket

GUN BOOT® 4.3 » Includes Gun Boot® IV case convenience with Gun Boot® III

case type mount » Includes Gun Boot® case and bracket » Removable, 2 piece shock absorbing foam and nylon Im-

pact™ liner included » Designed to accommodate left and right hand bolt action

rifles and shotguns » Provides ample room for 50mm scopes and even rifles with

slings attached or shotguns up to 51” (130cm) in length » Compact design of this bracket provides for universal fit-

ment to most ATV racks or UTV roll bars » Ergonomically designed handle and molded attachment

points for a sling » Protects your gun and optics on the trail » Installs quickly and easily » All mounting hardware included » Made in the USA

KOL20053 with Bracket

GUN BOOT®GUN BOOT®GUN BOOT 4.3» Includes Gun Boot® IV case convenience with Gun Boot® IV case convenience with Gun Boot® ® III ® III ®

GUN BOOT

GUN BOOT GUN BOOT ® 4.3 4.3® 4.3®

WWW.KOLPIN.EU 9

GUN BOOTGUN BOOT®® IV: IV: ® IV: ®® IV: ®ADDITIONAL MOUNTSADDITIONAL MOUNTS

10 WWW.KOLPIN.EU

GUN BOOT ® 5.0® 5.0®

The universal fit built in bracket adjusts without

the use of any tools.

ATV Bracket

GUN BOOT® 5.0 » Gun Boot® case & mounting system all in one! » Universal built-in bracket mounts directly to your ATV rack » Bracket allows for multiple angle adjustments » Ergonomically designed handle & molded attachment

points for a sling » Designed to accommodate left & right hand bolt action

rifles & shotguns » Provides ample room for firearms up to 51” (130 cm) in

length, for 50mm scopes, & even rifles with slings attached.

» Impact™ model (KOL20095) » Includes a removable Velcro, shock absorbing foam & ny-

lon Impact™ liner that provides superior interior protection

Transport™ model (KOL20090) » Includes a separate soft carrying gun case that fits within

the hard case instead of the standard Impact™ liner » Constructed of a durable Cordura exterior with full length

zipper access » Spacious interior of two layers of dense closed cell foam

providing the ultimate in protection, fit & convenience

KOL20095 Impact™ KOL20090 Transport™

KXP GUN BOOT® 5.0 » Gun Boot® 5.0 case & mounting system all in one! » Complete system includes - universal built-in bracket that

mounts directly to your Polaris® ATV rack / UTV Bed Rail » Designed to accommodate left & right hand bolt action

rifles & shotguns » Bracket allows for multiple angle adjustments » Custom design base plate incorporates built-in KXP mount-

ing system » Compatible with Polaris® composite ATV racks / UTV Bed

Rails using the Polaris® Lock & Ride® System » Includes a separate soft carrying gun case that fits within

the hard case instead of the standard Impact™ liner. » Constructed of a durable Cordura exterior with full length

zipper access

KOL20096 Transport™ (POLARIS ATV)

INLET FOR GUN BOOT® 5.0 » Inlet for Gun Boot

® 5.0

(KOL20090, KOL20095 & KOL20096)

KOL20055RB

PIN FOR GUN BOOT® 5.0

» Pin for Gun Boot®

5.0 (KOL20090, KOL20095 & KOL20096)

KOL66351

KOL20055RB

WWW.KOLPIN.EU 11

KOL20025 Impact™

GUN BOOT® 6.0 » Features one of the largest interior volumes of all Kolpin® Gun Boot® cases » Extra room for pistol grip type weapons & small bi-pods » Easily fits firearms up to 51” (130cm) in total length » Provides ample room for up to 60mm scopes » Hatchback design allows easy access » Snap close cover with locking capability » Ergonomically designed handle & molded attachment points for a sling » Designed to accommodate left & right hand bolt action rifles & shotguns » Utilizes all existing Gun Boot® IV brackets (sold separately) in order to mount to your ATV or UTV » Not compatible with our UTV specific mounts (KOL20036 & KOL20129) » Compatible with the Utility Gear Rail System (KOL20035 or KOL26510 required)

KOL20025 Impact™ model » Includes a removable velcro, shock absorbing foam & nylon Impact™ liner that provides superior interior protection

KOL20020 Transport™ model » Includes a separate fully zippered soft carrying gun

case that fits within the hard case instead of the stan-dard Impact™ liner

» Exterior Constructed of durable condura with full length zipper access

» Spacious interior includes two layers of dense closed cell foam providing the ultimate in protection, fit & convenience

GUN BOOT GUN BOOT ® 6.0® 6.0®

KOL20020 Transport™

12 WWW.KOLPIN.EU

KXP BOOTTECTOR® BRACKET

» Fits Kolpin® Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only

» Compact design provides more room on the ATV/UTV

» Lightweight & extremely durable » Adjusts without the use of any tools » Offers precision gun angle adjust-

ability » Custom design base plate incorpo-

rates built-in KXP mounting system » Compatible with Polaris® composite

ATV/UTV racks using the Polaris® Lock & Ride® System

KOL20350 POLARIS ATVKOL20351 POLARIS UTV

KXP GUN BOOT® IV OR 6.0 LOOP BRACKET

» Fits Kolpin® Gun Boot® IV, Gun Boot® 6.0 & Saw Boot cases only

» All-metal constructed loop bracket » Bracket can be adjusted to multiple angle

positions between 0° & 45° » Rubber coated ring holds your Gun Boot®

case securely » Locking pin prevents additional move-

ment & vibration when bouncing over rugged terrain

» Compact design provides more room on ATV racks

» Custom design base plate incorporates built-in KXP mounting system

» Compatible with Polaris® composite ATV racks using the Polaris® Lock & Ride® System

KOL20033 POLARIS ATV

UNIVERSAL GUN BOOT®

/SAW BOOT BRACKET » Fits Kolpin® Gun Boot® IV, 4.3,

6.0 cases and Saw Boot only (sold separately)

» Universal bracket fits most ATV tubular steel racks or UTV frames up to 2” (5,1cm) diameter (Also fits square tubing)

» All metal constructed loop bracket

» Bracket can be adjusted to mul-tiple angle positions between 0° and 45°

» Rubber coated ring holds your Gun Boot® case securely

» Bracket design lets you utilize your entire ATV rack

KOL20200

KXP BOOTTECTOR®

GUN BOOT® 6.0: CHOOSE YOUR MOUNT® 6.0: CHOOSE YOUR MOUNT®

WWW.KOLPIN.EU 13

SAW BOOT » Secure & protect your chain saw when traversing

over rough terrain » Fits up to a 20” (50,8cm) bar » Fits in standard Kolpin® Gun Boot® brackets -

Simply remove your Gun Boot® case & install your Saw Boot

» Designed to be used with Universal Gun Boot® IV Bracket (KOL20032 - sold separately), Boottector® Bracket (KOL20035 - sold separate-ly), or Universal Gun Boot® / Saw Boot Bracket (KOL20200 - sold separately)

» Saw can be quickly secured/removed with a bun-gee tie down

» Included heat shielding allows for carrying a hot saw

» Universal fit for most ATV racks

KOL20600

UNIVERSAL FIT SAW PRESS® II BRACKET » Transport your chain saw securely & safely on any ATV » Heavy duty, black powder-coated metal bracket is designed to

attach any model chain saw to an ATV » Rubber pads provide cushion & tight fit » Hinged design for quick removal » Holds saw in vertical position or 45˚ in either direction » Accommodates any brand chain saw with up to 20” (50,8cm) bar » Fits most ATV’s with tubular racks

KOL20044

SAW BOOTSAW BOOT

TOOL PRESS BRACKET » Heavy duty metal brackets for long-handled tools like axes,

shovels etc.. » Thick rubber lining clamps handles , locks securely » Holds short handled tools

in vertical positions

KOL20045

SAW BOOT / PRESSSAW BOOT / PRESS

14 WWW.KOLPIN.EU

UNIVERSAL FUEL PACK BRACKET

» Universal bracket fits most ATV tubular steel racks or UTV frames up to 2” (5,1cm)

» Also fits square tubing, great appli-cation for pontoon boat rails

» Constructed of steel with glass infused nylon plastic fuel pack mounting

» 1/4-turn action knob allows for quick and easy removal of the fuel pack from bracket

» Bracket design lets you utilize your entire ATV rack

» Quick and secure re-attachment » Mount the large, 4 gal. Kolpin Fuel

Pack vertically on your ATV rack by using (2) Fuel Pack Brackets

KOL89445

ATV DOUBLE FUEL PACK JR BRACKET

» Constructed of steel with glass infused nylon plastic turn knob with a brass threaded insert

» 1/4-turn knob allows for quick & easy removal of the fuel pack from bracket

» Designed to hold (2) Kolpin Fuel Pack Jr. Does NOT work with 4 Gallon Fuel Pack

» Mountable to any tubular ATV rack

» Uses minimal rack spaceKOL89465

KXP FUEL PACK BRACKET » Constructed of steel with glass infused

nylon plastic turn knob with a brass threaded insert

» ¼-turn action knob allows for quick and easy removal of the fuel pack from bracket

» Designed to work with Fuel Pack Jrs. Does NOT work with 4 gallon Fuel Pack

» Quick and secure reattachment » Uses minimal rack space » Custom design base plate incorporates

built-in KXP mounting system » Compatible with Polaris® composite ATV

racks / UTV Bed rails using the Polaris® Lock & Ride® System

» Does NOT fit Touring, X-2 or RZR Models

KOL89485 Polaris ATVKOL89495 Polaris UTV

FUEL PACK - 4 GALLON » New and improved seal constructed of Viton™

» CARB and EPA compliant » Low profile design makes it easy to stack

multiple fuel packs » Puncture and crush resistant » Mount to your ATV, UTV, garage wall, camper,

boat and more » Includes 1” wide Velcro straps letting you

stack additional gear on top » Dimensions: 34 1/2 “ W X 3” D X 13 ¼” H

(87,6cm W x 7,6cm D x 33,7cm H)

KOL89135

PACK MOUNT » Durable constructions pro-

vides superior strength » Versatile mounting system

allows brackets to be attached to any box or flat drillable surface

» (2) are required to mount the 4-gallon fuel pack

» Compatible with the Kolpin Utility Gear Rail System (KOL26400)

KOL89435

ATV FUEL PACK BRACKET

» Designed to vertically mount the packs off your ATV rack, leaving plenty of room for your other gear

» Constructed of steel with glass infused nylon plastic turn knob with a brass thread-ed insert

» Mounting the 4 gallon fuel pack will require (2) two fuel pack brackets

KOL89475

KOL89485 - ATV

KOL89495 - UTV

FUEL PACK - 4 GALLON

PACK MOUNTDurable constructions pro-vides superior strengthVersatile mounting system allows brackets to be attached to any box or flat

(2) are required to mount the 4-gallon fuel pack FUEL PACK - 4 GALLON

Durable constructions pro-

TPG SPOUT ASSY(GREEN)

» Replacement for KOL89135 & KOL89185

KOL89080

KOL89135

FUEL PACKSFUEL PACKS

WWW.KOLPIN.EU 15

RHINO GRIPSTHE MOST VERSATILE WAY TO SECURE YOUR GEAR.

WWW.KOLPIN.EU 15

16 WWW.KOLPIN.EU

WHAT’S A RHINO GRIP?ONE OF THE BEST WAYS TO TRANSPORT AND STORE YOUR GEAR. OUR PURPOSE-BUILT LINE CAN SECURELY ATTACH TO YOUR ORV, GARAGE WALL, TRUCK AND MUCH MORE.

KXP SYSTEMUTV MOUNT ATV MOUNT KXP SYSTEM

ONE OF THE BEST WAYS TO TRANSPORT AND STORE YOUR GEAR. OUR PURPOSE-BUILT LINE CAN SECURELY ATTACH TO ONE OF THE BEST WAYS TO TRANSPORT AND STORE YOUR GEAR. OUR PURPOSE-BUILT LINE CAN SECURELY ATTACH TO

KXP MODEL Compatible with the Lock & Ride® System. This system was specifically designed to attached securely so you can transport your valuable gear with confidence.

SECURE The outside notches allow you to secure your gear in place by wrapping a rubber strap around the outside of the grip.

PROTECTS The flexible and thick rubber material will securely grip your gear without scratching it.

ADJUSTABLE BASE The adjustable base of our original Rhino grip allows you to mount gear to the racking on your ATV, UTV, or any flat drillable surface.

WWW.KOLPIN.EU 17

RHINO GRIPS®RHINO GRIPS®RHINO GRIPSNEW

RHINO GRIP® PRO » The toughest Rhino Grip yet » Durable cast aluminum construction with

protective rubber over-molding for a carrying solution that delivers maximum functionality and unparalleled strength

» Heavy-duty design carries guns, bows, fishing poles, ice augers, shovels, rakes, farm tools, etc.

» Precision tilt angle and rotation adjustment for a custom fitment without tools

» Universally mounts to any tubular bar including UTV roll cages & ATV racks from 7/8” (2,2cm) to 2” (5,1cm) in diameter or any flat drillable surface

» Includes durable rubber securing straps » Sold as a pair

KOL21560 (Pair)

®

NEWNEW

Universally mounts to any tubular bar including UTV roll cages & ATV racks from 7/8” (2,2cm) to 2” (5,1cm)

KOL21500 - SINGLEKOL21520 - SUCTION CUP

KOL21525 - WINDOW/WALL

KOL87010R - RUBBER STRAPSKOL87010R - RUBBER STRAPSKOL87010R - RUBBER STRAPSKOL87010R - RUBBER STRAPS

RHINO GRIP®

All Rhino Grips include: » Durable, flexible grips that cushion & protect while providing a

custom fit » Sold as a pair (2), includes rubber securing straps » Utilize Rhino grips in any vehicle. They are designed to fit trucks,

SUV’s, UTV’s, RV’s, trailers » Fits all tubular ATV racks - drilling required to mount on composite

racks

KOL21500 SingleKOL21505 DoubleKOL21520 Window Mount Suction CupKOL21525 Window/Wall Mount Adhesive StripKOL87010R Replacement Rubber Straps (Pair)

KOL21500 - SINGLEKOL21500 - SINGLE

KOL21505 - DOUBLE

18 WWW.KOLPIN.EU

KOL21540

RATCHETING RHINO GRIP®

» Soft cross pattern rubber grips provide increased cushioning & gripping power for items in a variety of shapes & sizes

» Heavy duty design carries guns, bows, fishing poles, shovels, rakes, farm tools, etc.

» Kwik Clip design for on/off rotational in field adjustments » Quick release button opens the grip quickly for easy access to

gear » Ratcheting design allows for securing items from 1 - 4 inch

(2,5 - 5,1 cm) diameter » Dimensions: 9” h x 4” (22,9cm H x 10,2cm) when opened,

1” (2,5cm) when closed

KOL21540

KOL21540 KOL21540

KXP PLUNGER » Ergonomically designed handle

with brass insert » Expanding plunger provides a

solid attachment for accessories » Easy installation - no tools required » Quick on/off - change accessories

by rotating the power twist handle » Compatible with Polaris® composite

ATV racks /UTV bed rails using the Polaris® Lock & Ride® System

» KOL98500 ATV - 1” Dia. x 1 1/2” (2,5cm D x 3,8cm)

» KOL98510 UTV - 1.25” Dia. x 4 1/4” (3,2cm D x 10,8cm)


KXP PLUNGER

KWIK CLIPS » Replacement small kwik

clips for Kolpin Rhino Grips for use with the following grips: KOL21510KOL21515KOL21530KOL21535

KOL71509

BASE MOUNT » Replacement Plastic

Mounting Base - Clip Style for use with:KOL21510KOL21515KOL21535

KOL71514

LARGE KWIK » Replacement Mounting

Clip - large for use with:KOL21515KOL21540

KOL71540

BASE MOUNT » Replacement Mounting

Base for:KOL21540KOL21515

KOL71541

RHINO GRIPS®RHINO GRIPS®RHINO GRIPS

WWW.KOLPIN.EU 19

KOL21515 - DOUBLE

KOL21530 - BAR MOUNT

KOL21535 - UTV MOUNT

KOL21510 - SINGLE

KOL21535 - UTV MOUNT

RHINO GRIPS XL » First fully adjustable grip that

does not require tools » Rotates 360˚ » Tilts 0˚ - 180˚ in 45˚ increments » Larger heavy duty mounting

base fits tubing 3/4” (1,9cm) - 2” (5,1cm) diameter

» Kwik clip design for on/off rota-tional in field adjustments

» XL Single (KOL21510) is 8” (20,3cm) tall from the base

» UTV Mount (KOL21535) mounts directly to your UTV roll bar

» Heavy-duty base provides mul-tiple mounting orientations for UTV roll bars from 7/8” (2,2cm) - 2” (5,1cm) diameter

»

KOL21510 XL SingleKOL21515 XL DoubleKOL21530 XL Bar MountKOL21535 UTV MountKOL87010R Replacement Rubber Straps (Pair)

RHINO GRIPS® ARE AVAILABLE IN UTV MOUNT, WALL MOUNT AND BAR MOUNT

STYLES

The Kolpin® KXP Accessories are compatible with Polaris® composite racks and/or bed rails using the Polaris® Lock & Ride® system.

The Kolpin® X-Pansion system (KXP) uses our unique expansion plunger - Simply attach, tighten with NO tools, & ride. Spe-cially designed mounting plates line up your Kolpin® accessory perfectly with existing OEM rack mounts. The Kolpin® KXP system provides secure accessory positioning with quick & easy changeover.

Now you can attach all of your accessories with the twist of a wrist. Items like your Gun Boot® cases, including the Kolpin® Gun Boot® 6.0 case, quickly mount our handy 4 gallon Fuel Pack for extra fuel on a trail ride... or use our versatile Rhino Grip holders to carry utility tools... whatever your use requires, we have you covered. Purchase extra KXP plungers to attach Kolpin® molded boxes or even your own accessories - the possibilities are endless.

POLARIS® and LOCK & RIDE® are registered trademarks of Polaris Industries Inc.

KOL98500 - ATV

KOL98510 - UTV

KXP PLUNGER » Ergonomically designed handle

with brass insert » Expanding plunger provides a

solid attachment for accessories » Easy installation - no tools required » Quick on/off - change accessories

by rotating the power twist handle » Compatible with Polaris® composite


» KOL98500 ATV - 1” Dia. x 1 1/2” (2,5cm D x 3,8cm)

» KOL98510 UTV - 1.25” Dia. x 4 1/4” (3,2cm D x 10,8cm)


KOLPIN EXPANSION SYSTEM

are endless.

POLARIS® and LOCK & RIDE® and LOCK & RIDE® ® are registered trademarks ® are registered trademarks ®

of Polaris Industries Inc.

KOL98500 - ATV

KXP PLUNGER» Ergonomically designed handle

KOL98500 - ATVKOL98500 - ATV

20 WWW.KOLPIN.EU

KOL21541 - ATV

KOL21542 - UTV

KXP RATCHETING RHINO GRIP®

» Soft cross pattern rubber grips provide increased cushion-ing & gripping power for items in a variety of shapes & sizes

» Heavy duty design carries guns, bows, fishing poles, ice augers, shovels, rakes, farm tools, etc.

» Kwik Clip design for on/off rotational in field adjustments » Quick release button opens the grip quickly for easy access

to gear » Ratcheting design allows for securing items from 1” (2,5cm)

- 4” (10,1cm) diameter » Custom design base plate incorporates built-in KXP mount-

ing system » Compatible with Polaris® composite ATV/UTV bed rails us-

ing the Polaris® Lock & Ride® System

KOL21541 Polaris ATV (Pair)KOL21542 Polaris UTV (Pair)


KXP RHINO GRIP® XL » Available in single or double styles » Durable, flexible grips cushion & protect while providing a

custom fit » Rotates 360˚ & tilts 0˚ - 180˚ in 45˚ increments » Kwik clip design for on/off rotational in field adjustments » Custom design base plate incorporates built-in KXP mounting

system » Compatible with Polaris® composite ATV racks /UTV bed rails

2005 - newer using the Polaris® Lock & Ride® System

KOL21511 Polaris ATV (Pair)KOL21512 Polaris UTV (Pair)

KXP RHINO GRIP XL DOUBLEKOL21516 Polaris ATV (Pair)KOL21517 Polaris UTV (Pair)KOL87010R Replacement Rubber Straps (Pair)

KOL21512 - UTV

KOL21516 - ATV

KOL21517 - UTV

KOL21511 - ATV

RHINO GRIPS®RHINO GRIPS®RHINO GRIPS

WWW.KOLPIN.EU 21

UTV GUN RACK RUBBER STRAPS » Replacement rubber straps for the Kolpin® UTV Gun Rack

(KOL20073) » Dimensions: 8 1/4” (21cm) long

KOL70732 Pair

ADJUSTABLE Adjustable height and angling allows you maximize space and comfort.

ADJUSTABLE Adjustable height and angling allows you maximize space and comfort.

UTV GUN RACK » In cab gun rack mounts to the floor

or cargo bed of your UTV or truck for easy access to your firearms

» Safely & securely hold either a shot-gun or scoped rifle

» Constructed with a heavy-duty overmolded butt section to securely hold the stock of your firearm

» Over molded v-blocks with tough rubber straps provide firearm & barrel support

» Fits UTV’s with flat floor such as 2009-Current Polaris Ranger

» Gun Rack mount adapter riser (KOL20074) required for Polaris 2008 & earlier & Yamaha 2007 & earlier utility vehicles with center transmission hump

» Other specific adapter plates available » Will accommodate a firearm in a protective gun sock » Adjustable height from 27 1/2” (70cm) to 35 1/2” (90cm) » Fully adjustable, angling up to 45˚ in either direction » Base Dimensions: 5.25” (13,3cm) W x 6” (15cm) front to

back

KOL20073

TERYX ADAPTERPLATE

» Riser plate adapts UTV Gun Rack (KOL20073) to Kawasa-ki Teryx

KOL20076

RISER MOUNT » Riser plate adapts UTV Gun Rack

(KOL20073) for clearance on machines with raised transmission tunnel

» Dimensions: 4” (10,2cm) W x 10 3/4” (27,3cm) hole to hole

» Will not fit the 2008-Current Yamaha Rhi-no model with factory center console

» Fits models with center transmission hump such as 2004-2007 Yamaha Rhino, 2008 & earlier Polaris Ranger

» Does NOT fit 2013 Polaris® XP 900

KOL20074

(KOL20073) for clearance on machines

Will not fit the 2008-Current Yamaha Rhi-

hump such as 2004-2007 Yamaha Rhino,

GUN CARRIERS

22 WWW.KOLPIN.EU

UTILITY GEAR RAIL SYSTEM » Stationary rail system mounts behind driver & passenger on UTV roll bar » Fits parallel upright roll cages only. Cut-to-fit design » Universal mounting options for many Kolpin® accessories » Accommodates Kolpin® Gear Grips®, Rhino Grips, Gun Boot® IV, 5.0 & 6.0

cases, Boottector® Bracket, & ATV/UTV Basket. » Injection molded mounts accommodate tubing sizes from 1.25” (3,2cm) - 2”

(5,1cm) » Rail is made with heavy-duty 7 gauge extruded anodized black aluminum » Includes one versatile Gear Rail Bracket (KOL26500)

KOL26400 Universal (54 1/2” / 138,4cm)

GEAR SYSTEMS

WWW.KOLPIN.EU 23

GEAR RAIL DOUBLE GUN BOOT® MOUNT

» Everything you need to mount (2) Gun Boot® cases (sold separately) to the Utility Gear Rail System (KOL26400)

» Includes (1) c-clamp, (2) metal Gun Boot® mount-ing plates, (2) Boottector® Gun Mounts, & all necessary hardware

» Separate purchase of Utility Gear Rail System (KOL26400) required

» Accommodates Gun Boot® IV & 6.0 cases (not included)

** To accommodate multiple accessories, such as a 4 gallon fuel pack, additional Gear Rail System Brackets (KOL26500) can be purchased separately

KOL26510

GEAR RAIL SYSTEM ACCESSORY BRACKET

» Mount additional accessories to the Kolpin® Utility Gear Rail System with this accessory bracket

» Includes c-clamp & metal mounting brackets » Can be utilized - U-Shaped • Vertical • Hori-

zontal

KOL26500

KOL26500

KOL26510

KOLPINTECHThe Kolpin® Utility Gear Rail System is de-signed to fit parallel upright roll cages only

Cut-to-fit design.

One of the many ways the Utility Gear Rail System works for you......

UTV GEAR TRANSPORTSYSTEM

» Compatible with Kolpin® Gear Grips®, Boottec-tor® Bracket, Gun Boot® 5.0, Fuel Pack Jr..

» Accommodates round roll bars varying in diame-ter from 31.75 mm to 50.8 mm

KOL26200

24 WWW.KOLPIN.EU

UTV SPEAKER CUBEEach speaker has:

» One Jensen 6.0” (15cm) / 100WMarine Grade Speaker

» Mounting Brackets & Hardware » 10.0’ Long Pre-Wired Lead » Clamp fits 1 3/4” (4,4cm) x 1 7/8”

(4,8cm) diameter tubing » Sold as a pair » Dimensions: 9” 22,8cm) L x 11.5” (29,2cm) W x 7” (17,8cm) H

KOL3510 Pair

UNIVERSAL UTV STEREO WITH DUAL SPEAKER

» Universal UTV mount stereo console with dual speaker tower

» Weather resistant & durable design » Fits tubing 1 3/4” (4,4cm) x 1 7/8” (4,8cm) diameter

Stereo Features: » Jensen JMS2212 Marine Grade Waterproof

AM/FM/USB/iPod/iPhone ready » 200 Watts (50w x 4) » USB input supports MP3 & WMA digital music formats » Sirius Satellite ready (separate software is required) » Zero memory Current draw » Wired Remote capable (JWR200) » Dimensions 5 1/8” (13cm) x 3 3/4” (9,5cm)

Speaker Features: » Two Jensen 6.0” (15cm) / 100W Marine Grade Speakers » Mounting Brackets & Hardware » 10.0’ (300cm) Long Pre-Wired Lead”

**Extra speakers sold separately

KOL3500ATV FRONT STEREO BOX

» Heavy duty, Rotomolded, construction » 1.5 cu ft (85 Liters) of weather-resistant storage » Clear polycarbonate windscreen for protection » Mounts to most tubular or composite racks

Face Plate Features: » Jensen MSR 2010 weatherproof, wired remote with display » Single line dot matrix display with blue backlight » Selectable US/Euro frequency tuner » Sirius Ready

(requires additional software) » UV resistant front panel » Corrosion resistant

KOL4435

UTV DUAL SPEAKER » Two Jensen 6.0” (15cm) / 100W Marine Grade Speakers

in stylish housing » Mounting Brackets & Hardware » 10.0’ (300cm) Long Pre-Wired Lead » Clamp fits 1 3/4” (4,4cm) x 1 7/8” (4,8cm) diameter tubing » Standard with Kolpin® KOL3500 Universal Stereo package » Dimensions: 18” (48cm) l x 11.5” (29cm) w x 7” (18cm) h

KOL3505

WWW.KOLPIN.EU

»

»

Face Plate Features: »

»

»

»

»

»

KOL4435

AUDIO

WWW.KOLPIN.EU 25

DUALLY LIGHTS » 4 LED per light in a compact package » Unlimited use for trucks, ATV’s, UTV’s, trailers,

toy haulers, RV’s, boats, etc. » 1080 Lumens, less than 1 Amp draw » No warm up, instant on/off » No hot spots, vibration or bouncing beams » Waterproof / Off-road use only » Works great for backup applications » Switch, wire harness and base mounts included

KOL97994 SINGLE FLOODKOL97995 SINGLE SPOTKOL97996 DOUBLE FLOOD (each)KOL97997 DOUBLE SPOT (each)

BULLITT LED LIGHT » Single 10 W Cree LED produces 900 Lumens » Draws less than 1 Amp » IP68 dust and water intrusion rated » Cast aluminum housing » 50,000 hour life span » Wire harness included » Single M6 Mounting Stud » Dimensions: 2.25” (5,7cm) diameter

KOL97993

Unlimited use for trucks, ATV’s, UTV’s, trailers,

Switch, wire harness and base mounts included

WWW.KOLPIN.EU 25

DUALLY DOUBLE (SPOT PATTERN)

» Small 3 inch - 3 inch light can fit anywhere » Plug and play wiring harness with switch » 100 percentage optically clear lens » 1.1 amperes, 15 watts and 1300 lumens » 4 LED light in a compact package

KOL9791130” COMBO LIGHT BAR

» 93% Optical Efficiency » Shockproof / Waterproof » 50,000+ Hour Life Span » Easy Two Wire Installation » Flood reflectors on the outside of the light

and spot reflectors on the inside half of the light

» Optimize both functional light spread and light distance for increased visibility

» Comes complete with wiring harness and switch

KOL97930

2” CLAMP KIT » 3 Piece adjustable clamp system » Mount your new light bar to any

size tubing from 1 inch - 2 inches » Allows you to mount your light bar

at any angle » Easy Installation

KOL97970

30” COMBO LIGHT BAR93% Optical Efficiency

LED LIGHTS

26 WWW.KOLPIN.EU

Cooler with Matrix™ grid tohold beverages & containers

Cooler bag detaches for easy transport

Cooler with Matrix™Cooler with Matrix™Cooler with Matrix grid to™ grid to™

hold beverages & containers

Mossy Oak® Breakup™

Realtree® APBlack

Black

MATRIX™ SEAT BAG » Constructed of 600D nylon with exclusive Hydro Shield™

coating and UV protection coating » Padded, back rest style seat for added comfort » Features multi-piece, detachable gear bags with center

Matrix cooler » Center Matrix cooler section keeps up to a 12-pack of

beverages cold with room for additional goodies. » Patented water bottle holder zips out only when you need it » Exterior shock cord provides addition storage for items

like gloves and jackets » Includes two removable gear bags with gusseted wet/dry

compartments & water bottle pockets » Web reinforced buckles attachments secure to any ATV

rack » 2.02 cubic feet (57 Liters) of accessible storage » Overall Dimensions 32” (81cm) x 22” (56cm) x 11” (28cm) » Side Pod Dimensions: 16” (41cm) x 6” (15cm) x 8” (20cm)

KOL91150 Mossy Oak® Breakup™

KOL91155 Black

TRAILTEC GEAR BAG » Low profile, zipperless design » UV protection coating » Use on front or rear rack of your ATV » Two metal cam buckles allows for quick/secure attachment » Reflective material to enhance visibility & safety » Dimensions: 13” (33cm) L x 28” (71cm) W x 9.5” (24cm) H,

2 cubic feet (57 Liters) of storage


REAR SEAT BAG » Constructed of durable nylon » Zipperless design » Quickly attaches to ATV rear rack using adjustable straps

& quick release buckles » Includes padded seat for comfort & relaxation » Overall Dimensions: 34.5” (88cm) L x 19” (48cm) W x 10.5”

(27cm) H » Side Pod Dimensions: 18” (46cm) x 8” (20cm) x 7.5” (19cm),

1.75 cubic feet (50 Liters) of storage


SOFT LUGGAGE

WWW.KOLPIN.EU 27

Realtree® AP

Black

TRAILTEC CARGO BAG » Zipperless design » Adjustable interior divider allows for gear organization and

added protection » Form-fitted rain/dust cover included » Semi-ridged construction allows bag to maintain shape and

provides extra protection for your cargo » Two metal cam buckles for quick/secure attachment » Fully lined interior is light gray in color for high visibility » Reflective material enhances visibility to provide a safer

riding experience » Licensed Realtree® AP pattern with 300 hour UV protective

coating applied » Dimensions: 15’’ (38cm) L x 36’’ (91cm) W x 14.5’’ (37cm) H » 4.5 cubic feet (127 Liters) of storage


TRAILTEC DELUXE CARGO BAG » Our largest available cargo bag » Zipperless design, UV Protection coating » Removable, roll-top cooler & accessory pods » Easily fits up to 3 adult sized helmets with cooler removed » Form-fitted rain/dust cover included » Semi-ridged construction allows bag to maintain shape and

provides extra protection for your cargo, one removable cen-ter cargo divider

» Two metal cam buckles allow for quick/secure attachment » Reflective material enhances visibility & safety » Overall Dimensions: 22.5” (57cm) L x 36” (91cm) W x 14.5”

(37cm) H » Side Pods: 7.5” (19cm) L x 9” (23cm) W x 11” (28cm) H » Back Rest: 17” (43cm) W » 4.96 cubic feet (140 Liters) of storage


Realtree® AP

Black

28 WWW.KOLPIN.EU

TANK BAGAdd additional storage space and convenient, waterproof map access to your ATV without interfering with your ride. Durable pockets constructed of 600 denier nylon with Hydro Shield™ coating keep your necessities within your reach and Mud Guard™ zippers and zipper flaps prevent de-bris from entering the bag when on the trail. Improved design features shock cord tie downs for secure fit to tank and Rhino Armor™ reinforcement in high wear areas for extra durability and protection. Patented water bottle holder zips out only when you need it.

» 35 cubic feet (0,99m³) of accessible storage » Dimensions of each pocket are:

8” x 10” x 4” (203,2 x 254 x 101,6mm)

KOL92140 Mossy Oak® New Breakup™

TERRAIN-TEC DUFFLE BAG » Secure to any ATV with 1 ½” (3,8cm) webbing and extra

large, web reinforced buckles » Included rain/dust cover for additional protection from the

elements » Oversize, 4” (10,2cm) wheels for heavy load capacity and

easy navigation » Hidden, telescoping aluminum handle and integrated,

ergonomical hand holds for easy transport on the tarmac or trail.

» Travel approved » Dimensions: 30” l x 16” w x 16” h (762 x 406 x 406mm) » 4.44 cubic ft (0,13m³) of accessible storage imensions of

each pocket are: 8” x 10” x 4” (203,2 x 254 x 101,6mm)

KOL92176 Realtree® AP™

TERRAIN-TEC ROLLER BAG » Secure to any ATV with web reinforced buckles » Included rain/dust cover for additional protection from the

elements » Industry standard wheels for heavy load capacity and easy

navigation » Ultra smooth, lockable zippers » 2 position, telescoping aluminum handle

and integrated, ergonomical padded hand holds for easy transport on the tarmac or trail.

» Travel approved » Dimensions: 13” l x 20” w x 7” h

(330,2mm x 508mm x 177,8mm) » 1 cubic ft (0,03m³) of accessible storage


SOFT LUGGAGE

WWW.KOLPIN.EU 29

FRONT TRAIL BOX » Contoured design allows for minimum sight reduction

while riding » Double wall lid construction for added rigidity » Comes with a rubber sealing gasket between the lid and

the mainbody to keep dust and water out.

» Separate heavy duty keyed lockable center latch » Dimensions: 30.25” (77cm) L x 13.5” (34cm) W x 8.8”

(22cm) H » If mounting on a 2005-Current Polaris® ATV with Lock &

Ride® front rack, use our KOL93103 Accessory Mount Kit. Mount kit includes (2) mounting brackets & (4) KOL98500 KXP ATV Plungers & all hardware

KOL93101 Front Trail BoxKOL93103 KXP Polaris® Mounting Kit

REAR TRAIL BOX » Contoured design allows for maximum use of rack space » Large storage area that fits up to 2 XL helmets with extra storage room » Double wall lid construction for added rigidity allows for extra weight of

the optional accessory rack (KOL93202 - sold separately) » Comes with a rubber sealing gasket between the lid and the main body

to keep dust and water out. » Separate heavy duty keyed lockable center latch » 5 cubic feet of accessible storage » Dimensions: 37” (94cm) L x 17.3” (44cm) W x 13.6” (35cm) H » Fits most machines including the BRP Outlander Max » If mounting on a 2005-newer Polaris® ATV, use our KOL93203 Accessory Mount Kit.

Mount kit includes (2) mounting brackets & (2) KOL98500 KXP ATV Plungers, (1) Kwik Cinch Straps & all hardware

KOL93201 Rear Trail BoxKOL93203 KXP Polaris® Mounting Kit

KOL93103

KOL93203

KOL93101

KOL93201

KOL4420

ATV BUCKET STORAGETwo storage boxes for the price of one! Unique design allows for carrying the front box (included), rear storage box that can ac-commodate two 5-gallon buckets, or any combination of the three. That’s over 3 cu ft of storage space for all your gear, plus the ability to haul two 5-gallon buckets!Heavy duty, rotomolded, and uv-stabilized LLDPE (linear low-den-sity polyethylene) construction stands up to any chore or task. Conveniently includes a comfortable backrest, two drink holders, and side storage compartments that provide nearly 1.0 cubic feet of weather resistant storage with secure draw-tight latches. Mounts to most tubular or composite racks using four U-bolts and sealing washers OR for even more convenient attachment, utilize our Kwik-Cinch System (KOL98400).

» Dimensions: 48.25” l x 25.375” w x 14.38” h(1225mm x 644,4mm x 365,25mm)

KOL4420 Including Front Box

HARD LUGGAGE

30 WWW.KOLPIN.EU

ACCESSORY RACK » Designed to be used with Kolpin® Rear Trail Box

(KOL93201 - sold separately) » Heavy duty 1/2” (1,3cm) tubular steel construction » Threaded tubular ends allow for easy mounting on molded

box lids » Holds up to 150 lbs (max. 68 kg) » Base dimensions: 26 5/8” (68cm) L x 9 3/8” (24cm) W

KOL93202

ATV REAR HELMET BOX » Perfect ATV rear helmet box with easy storage access » Accommodates up to two adult helmets

or other large items » Mounts to most tubular racks using

four U-bolts & sealing washers » Opens in the rear with access to arm

cavities » Key lockable latches » 3.5 cubic feet (99 Liters) of

weather-resistant storage » Dimensions:

36.75” (93cm) L x 27.88” (71cm) W x 17” (43cm) H

KOL4438

LEGACY ATV STORAGE BOX WITH BACKREST

» The perfect ATV storage box with easy storage access

» Accommodates up to two adult helmets or other large items

» Easily mounts to tubular racks using four U-bolts and sealing washers

» Includes comfortable padded backrest and seat cushion

» Lockable latch » Dimensions: 33.5” (85cm) L x 27” (69cm) W x

10.5” (27cm) H

KOL4447

HARD LUGGAGE

Two key lockable latches

WWW.KOLPIN.EU 31 WWW.KOLPIN.EU 31

The Kolpin® X-Pansion system (KXP) uses our unique expansion plunger - Simply attach, tighten with NO tools, & ride! Specially designed mounting plates line up your Kolpin® accessory perfectly with existing OEM rack mounts. The Kolpin® KXP system provides secure accessory positioning with quick & easy changeover.

Now you can attach all of our Gun Boot® cases, including the newest Kolpin® Gun Boot® 6.0 case - all with a twist of the wrist. Quickly mount storage boxes or use our versatile Rhino Grip holders to carry utility tools... whatever your use requires, we have you covered!!! Purchase extra KXP plungers to attach Kolpin® molded boxes or even your own accessories - the possibilities are endless!POLARIS® and LOCK & RIDE® are registered trademarks of Polaris Industries Inc.

KOL98500 - ATV

KOL98510 - UTV

KXP PLUNGER » Ergonomically designed handle with

brass insert » Expanding plunger provides a solid

attachment for accessories » Available in two different sizes (ATV

& UTV) » Easy installation - no tools required » Quick on/off - change accessories by

rotating the power twist handle » Compatible with Polaris® composite


» ATV: 1” (2,5cm) D x 1 1/2” (3,8cm) » UTV: 1.25” (3,2cm) D x 4 1/4” (10,8cm)




OUTFITTER BOX » Largest hard-sided storage box offered by Kolpin®

» Easily accommodates 4 adult sized helmets & more » Lid has molded-in tray & double wall construction for extra

storage capacity & rigidity » Comes with a rubber sealing gasket between the lid and

the main body to keep dust and water out » Includes Kwik-Cinch straps for quick on/off attachment &

metal Accessory Rack for increased load carrying capacity » Fits most ATV tubular & composite racks » Dimensions: 42.5” (108cm) L x 21.5” (55cm) W x 16.75”

(43cm) H » Front to back base footprint - 13” (33cm) in the center be-

tween the rear of the seat to the rear of the rack, 19” (48cm)on the outside

» Seperate heavy duty keyed lockable center latch

KOL93450

DON’T FORGET TO BRING THE SHOVEL! See Pg. 16-20 for Kolpin Rhino Grips

WWW.KOLPIN.EU 31

32 WWW.KOLPIN.EU

NAVIGATOR BOX » Conveniently sized storage box » Rotomolded construction with snap closure » Rear hinged lid won’t warp or dent » Molded in rear step design allows box to be

mounted with no rack modifications » Mounts to most tubular racks using four

U-bolts & sealing washers » 4.3 cubic feet (122 Liters) of accessible storage » Dimensions: 36” (91cm) L x 19” (48cm) W x 14” (36cm) H » Front to back base footprint - 14” (36cm)

KOL93405

SCOUT BOX » Low-profile front or rear box » Rotomolded construction with snap closure » 2.5 cubic feet (71 Liters) of accessible storage » Dimensions:

34” (86cm) L x 14” (36cm) W x 9” (23cm) H » Mounts to most tubular racks using four U-bolts

& sealing washers

KOL93400

BUCKET HUGGER™ II » Molded design cradles up to (2) 5 gallon buckets » Removable, snap closure lid provides additional

security when transporting gear » Great for hauling all your gear when hunting, ice

fishing, landscaping or just hitting the trails » Mounting hardware included » Dimensions:

27” (69cm) L x 14.5” (37cm) W x 8.5” (22cm) H

KOL91750

NAVIGATOR AND SCOUT BOX » Economical rotomolded storage boxes » Single wall construction - Approximately .125” thick (0,32cm) » Molded in hinges » Pin lock latch can be replaced with a padlock for security

(not included)

KOLPINTECH

HARD LUGGAGE

WWW.KOLPIN.EU 33

ATV REAR LOUNGER » Heavy-duty molded construction » 2” thick padded seat and backrest for

comfort » Weather-resistant storage (sealing

washers included) » 2 heavy-duty, rubber and metal latches

secure the rear storage compartment » Drink holders and accessory holder

are built in the side.

KOL4445

CARGO TRAYFRONT / REAR

» Molded side handles » Holds up to two 20 liter buckets,

tools and gun grips » Polypropylene double walled con-

struction » Reinforcment on bottom and body

provides extra durability » Dimensions: 36” l x 18” w x 10” h

(914,4mm x 457,2mm x 254mm)

KOL91710

KWIK CINCH SYSTEM

» Kwik Cinch System eliminates the cum-bersome mounting procedures of using traditional hardware to attach hard storage accessories to your rack.

» Just attach the two galvanized steel plates to your storage accessory - se-cure the heavy duty nylon straps with PVC coated hooks to the attachment plate and your rack - cinch with the Cam-lock buckle to quickly secure

» No tools needed for on/off attachment of your storage accessory

» We recommend the use of (6) Kwik Cinch straps and attachment plates for use with ATV loungers*, seat boxes* and larger utility boxes.

KOL98400

PLASTIC HINGEPIN BUSHING

» For: KOL93201

KOL57-0010

SEAT CUSHION & BACKREST

» Available in black

KOL93206

CAM LOCK » For:

KOL93101 KOL93201KOL93450

KOL70459

RUBBER BUNGEES » For:

KOL4404KOL4407KOL4408KOL4410KOL4411KOL4420KOL4421

KOL70498

SPRING LOADEDLOCKABLE LATCH

» For: KOL4438

KOL70499

CAM LOCK DUST COVER

» For: KOL93101 KOL93201KOL93450

KOL70458

34 WWW.KOLPIN.EU

CONVERTIBLE REAR DROP RACK » 3 racks for the price of 1 » Convertible welded basket can be used with the rear rack extension

in either the dropped or raised position » Can be used separately for contained storage on your

ATV’s front rack » Designed to fit tubular steel ATV racks » Constructed of 1 ½ “ (3,8cm) diameter tubing for

perimeter support » Universal fit design » 1 ¼” (3,2cm) space before drop allows fitment to machines with

vertical rear rack loops » Welded basket dimensions:

38” (97cm) L x 13” (33cm) W x 7 ½” (19cm) H » Total assembled dimensions:

40 ½” (103cm) x 27 ¼” (69cm) x 10” (25cm), 28 lbs (13kg). » NOT recommended with Polaris ATV’s due to having to drill into composite rack

KOL53350

FRONT GEAR BASKET » Easily add extra front or rear storage to your ATV » Transport up to three 5 gallon buckets, tools, &

more » Universal fit to any front or rear tubular rack. » Designed to fit tubular steel ATV racks » Dimensions are 38” (97cm) L x 13” (33cm) W x 7 ½”

(19cm) H, weight 16 lbs (7kg). » NOT recommended with Polaris ATV’s

due to having to drill into composite rack

KOL53360

REAR DROP RACK » Black powder coated steel construction

offers the strength of traditional metal baskets » Drop basket includes fold down tailgate & cable

supports » Inside drop area dimensions are 12” (30cm) x 37 ½”

(95cm) with an 8” (20cm) drop » 1 1/4” (3,2cm) space 16” (41cm) before drop allows

fitment on machines with vertical rear rack loops » Designed to fit tubular steel ATV racks » Drop Basket (not tailgate) can hold up to 200 lbs

(90kg). » Dimensions: 43” (109cm) x 31” (79cm) x 10” (25cm),

51lbs (23kg). » NOT recommended with Polaris ATV’s


KOL53300

BASKET RACKS

WWW.KOLPIN.EU 35

FRONT RACK EXTENDER » Tubular steel construction » Durable, black wrinkle powder-coat paint » Provides multiple cargo tie-down points » 6.5” (16,5cm) tall to provide secure cargo

capacity to front rack » Universal fit for tubular steel ATV racks (does not fit Polaris

Sportsman Models) » Usable width is 28.5” (72cm) - 35.25” (90cm)

KOL53601

ATV TRIPLE BUCKET HOLDER » Durable powder-coat paint » Storage capacity for (3) 5 gallon buckets » Mounts behind rear rack allowing for additional storage

on rack » Universal fit for tubular steel ATV racks (does not fit

Polaris® Sportsman models)

KOL53650

ATV ICE AUGER HOLDER » Securely holds standard size ice augers in v-shaped lockers

and straps » Auger holder attaches to tubular ATV rack, either perpen-

dicular to vehicle or parallel to vehicle for narrow portages or pathways

» Easily attaches to front or rear ATV racks with thumbscrews and U-bolts

» No tools required to remove from ATV

KOL26100

FLAT BASKET » 1 1/2” (3,8cm) steel tubing for perimeter support » Bolt together design allows for

standard UPS shipping » Powder coated matte black finish » Welded expanded metal mesh

to contain small items » Mounts to front or rear of ATV » Designed to fit tubular steel ATV racks » Flat design increases rack space » Built-in tie down points » 1 ¼” (3,2cm) space at 16” (41cm) allows fitment to machines

with vertical rack loops » Assembled dimensions: 40” (102cm) L x 33” (84cm) W x 6”

(15cm) H » NOT recommended with Polaris ATV’s


KOL53400

KOL53601 - Front

36 WWW.KOLPIN.EU

KXP SADDLE STORAGE GEN 2

» Easy installation to Polaris® Ranger bed rails using the Polaris® Lock & Ride® locations

» (2) Kolpin KXP plungers included » Lockable latch » Provides 1.1 cubic feet (31 Liters) of

weather resistant storage » Dimensions: 22” (56cm) L x 12.25”

(31cm) W x 12.50” (32cm) H

KOL4413 Polaris UTV

UNIVERSAL SADDLE STORAGE GEN 2

» Easy attachment to any UTV dump box edge with a flat mounting surface

» Lockable latch » Provides 1.1 cubic feet (31 Liters) of

weather resistant storage » Dimensions: 22” (56cm) L x 12.25”

(31cm) W x 12.50” (32cm) H

KOL4412 - Single

SADDLE STORAGE BOX » Easy installation to inside bed rails of

most utility vehicles » Provides 1.375 cubic feet (39 Liters) of

weather resistant storage » Dimensions: 26.875” (68cm) L x 4.875”

(12cm) W x 14.75” (37cm) H

KOL4408 - Single

KEEP YOUR GUNS PROTECTED! See Pg. 11 for Gun Boot 6.0

UTV STORAGE

WWW.KOLPIN.EU 37

BENCH CENTER CONSOLE

» Easily access necessary gear » Two cup holders » Overall Dimensions:

21” (53cm) L x 10” (25cm) W x 8” (20cm) H

KOL4470

The Kolpin® X-Pansion system (KXP) uses our unique expansion plunger - Simply attach, tighten with NO tools, & ride! Specially designed mounting plates line up your Kolpin® accessory perfectly with existing OEM rack mounts. The Kolpin® KXP system provides secure accessory positioning with quick & easy changeover.

Now you can attach all of our Gun Boot® cases, including the newest Kolpin® Gun Boot® 6.0 case - all with a twist of the wrist. Quickly mount storage boxes or use our versatile Rhino Grip holders to carry utility tools... whatever your use requires, we have you covered!!! Purchase extra KXP plungers to attach Kolpin® molded boxes or even your own accessories - the possi-bilities are endless!POLARIS® and LOCK & RIDE® are registered trademarks of Polaris Industries Inc.


RHINO CROSSOVER TOOL BOX

» Constructed of heavy duty, Roto-molded, & uv-stabilized LLDPE (linear low-density polyethylene)

» Provides weather resistant storage for your valuable tools & gear

» Lockable gull wing doors can be eas-ily accessed from either side of your utility bed

» Scissors-type locking strut hold lids open for convenient access

» Fits all Rhino Models » Bed Dimensions: 43.75” min x 54”

max

KOL1479

OVERHEAD CONSOLE WITH MIRROR

» Provides additional overhead storage » UTV rear mirror included » Rear mirror features a convex lens

providing high visibility over roughterrain

» Rear mirror is easily adjustable » Universal clamps attach to roll bars

even with a roof installed » Fits 1 3/4” (4,45cm) roll bars only » Dimensions: 9.25”l x 5.5”w x 6”h

(23,5 l x 14,0 w x 15,2 h cm)

KOL4480

38 WWW.KOLPIN.EU

STAY WARM OUT THERE See Pg. 41 for Heated Grips

X-FACTOR™ “PLOW IN A BOX”The Kolpin X-Factor™ Plow System comes with everything you need to start plowing with your ATV today. Easy to assemble & install on your ATV, this durable ATV plow will have you pushing Mother Nature around.

» Industry first complete bolt together plow system in a box » Light duty, 3-piece steel & tube steel frame that will withstand years of plowing use » Strong square tubed push frame, easy on / easy off design » X-Factor™ Plow System comes complete with everything you need to start plowing

today » Forward ATV plow mount fits most ATV frames from 2002-current models » Rugged 52” (132cm) 14 gauge steel blade with double layer of steel at center X » 5 position blade angle » Dual trip springs & height adjustable HD skid shoes protect plow & ATV » Double sided steel wear bar that can be turned over to double the life » Easy to assemble, One year limited warranty » Requires Winch, Manual or Electric Lift system (Not Included)

KOL10-0520

PLOW SYSTEMS

WWW.KOLPIN.EU 39

DRIFTER PLOW » ATV Drifter Plow System complete with blade, heavy-duty push

tube and mount » Features Patent Pending Forward Plow Mount (US Patent

8,505,973) and fits most ATV frames from 2002-Current » Rugged 52” Poly Blade with Patented RibCore construction

(US Patent 7,685,748 B1) » Easy on / easy off push tube attachment » Strong square push tube » 5 position blade angle adjustment » Double sided steel wear bar that can be turned over to double

the life » Easy to assemble » One year limited warranty » NOT recommended for Can-Am models. See application chart

on website for model specific fitments » Requires winch, manual or electric lift system (Not Included)

KOL10-0550

40 WWW.KOLPIN.EU

PLOW SYSTEMS

66” BLADE HIGH RISE PLOW SYSTEMThe 25” lift-height combined with the mid-mount assembly also allows to trailer the ATV without having to take the plow off.Saving time, space and extra work in transit.

» OEM quality and features » Retro fit capability with Cycle Country products » One blade and frame for all vehicle makes » Quick install time (± 15 minutes) » Control of a mid-mount with the lift height of a front mount. » 17” high steel blade is stamped and welded for structural

rigidity

KOL31-0066



rigidity

KOL31-0072

PUSH TUBE HIGH RISE PLOW SYSTEMThe mid-mount system keeps your vehicle on solid ground, with increased traction and proper weight distribution. This elimi-nates the cuss-filled outbursts known to accompany the slipping and flipping common with front-mount systems.

» Perfect weight distrbution » 25” lift height » Dual pivot for max lift hieght » Ships partially assembled » ± 15 minutes install

KOL33-0000



rigidity

KOL31-0052



rigidity

KOL31-0060

WWW.KOLPIN.EU 41

Mossy Oak® New Breakup™

Black

PLOW ACCESSORIES

HEATED GRIP » Keep your hands warm

during those cold winter activities - plowing, hunt-ing, etc.

» Handlebar mounted dial switch

» Comfortable rubber grips » Plug & play connectors

KOL50-0360

PLOW MARKER KIT » Increases visibility of plow edges for added safety » Easily bolts to sides of plow blades » Steel markers have 45° bend base » Poly markers have 90° bend base

KOL10-0140 Pair (Steel)KOL10-0145 Pair (Poly)

BLADE FLAP » Universal Rubber Blade Flap

fits plow blades with widths 42” (107cm) - 72” (183cm)

» Keeps snow from flying into your face

» Available in any size from 42” (107cm) to 72” (183cm)

KOL10-0190

GEARTECTOR® MITTS » Extra large, reinforced opening for easy access to

handlebars » Plush lining to keep your hands warm » Simple locking draw cord to securely seal to handlebars » Durable Rhino plate front panel for abrasion resistance » Roomy interior allows complete access to all controls

KOL92180 Mossy Oak® Breakup™

KOL92185 Black

FORWARD MOUNT HARDWARE PACK

» For: KOL10-0550

KOLHK-124

BLADE HARD-WARE PACK

» For: KOL10-0520

KOLHK-125

SKID SHOEX-FACTOR

KOL105319

WEAR BAR X-FACTOR » 3 pieces needed

KOL105320

HEATED GRIP » Protect your hands from the cold » 4 level temperature settings » Fits any 7/8” (2,2cm) standard handlebars on ATV or snowmobiles » Easy to install with pre-wired electrical connectors » Handlebar or tank mounted electronic control unit with LED display » To assist in installation use contact cleaner or a type of lubrication

KOL96155KOL96156 Replacement Switch

42 WWW.KOLPIN.EU

ATV APPLICATION CHART MID MOUNTS

CAN-AM

MODEL YEAR KIT NO. 52” STEEL HIGH RISEKOL31-0052

60” STEEL HIGH RISEKOL31-0060

400 Outlander 2006-2014 KOL15-7561 Yes Yes450/500 Outlander L 2015 KOL15-7580 Yes Yes500 Quest 2003 KOL15-7511 Yes Yes500 Renegade 2008-2011 KOL15-7561 Yes Yes500 Traxter 1999-2005 KOL15-7511 Yes Yes500 Outlander 2007-2012 KOL15-7561 Yes Yes500 Outlander 2013-2014 KOL15-7570 Yes Yes650 Quest 2002-2004 KOL15-7511 Yes Yes650 Traxter 2005 KOL15-7511 Yes Yes650 Outlander 2006-2012 KOL15-7561 Yes Yes650 Outlander 2013-2014 KOL15-7570 Yes Yes800/800R Outlander (all) 2006-2011 KOL15-7561 Yes Yes800 Renegade 2007-2011 KOL15-7561 Yes Yes800R Outlander Max 2012 KOL15-7561 Yes Yes800R Outlander 2012-2014 KOL15-7570 Yes Yes1000 Outlander 2012-2014 KOL15-7570 Yes YesAll OUTLANDER & MAX models 2015 KOL15-7580 Yes Yes

HONDA



TRX 250 Recon 1998-2012 KOL15-1521 YES YESTRX 300 1993-2000 KOL15-1510 YES YESTRX 350 Rancher 2000-2003 KOL15-1550 YES YESTRX 350 2004-2006 KOL15-1591 YES YESTRX 400 Foreman < 2002 KOL15-1580 YES YESTRX 400 Rancher 2004-2007 KOL15-1591 YES YESTRX 420 Rancher 2007-2013 KOL15-1620 YES YESTRX 420 Rancher (AT) 2009-2014 KOL15-1620 YES YESTRX 420 Rancher (NON AT) 2014 KOL15-1630 YES YESTRX 420 Rancher (all) 2015-2016 KOL15-1630 YES YESTRX 450 Foreman 1998-2004 KOL15-1580 YES YESTRX 500 Rubicon < 2004 KOL15-1560 YES YESTRX 500 Foreman 2005-2011 KOL15-1600 YES YESTRX 500 Rubicon 2005-2014 KOL15-1600 YES YESTRX 500 Rubicon 2015-2016 KOL15-1630 YES YESTRX 500 Foreman 2012-2013 KOL15-1610 YES YESTRX 500 Foreman 2014-2016 KOL15-1630 YES YESTRX 650 Rincon 2003-2005 KOL15-1570 YES YESTRX 680 Rincon 2006-2016 KOL15-1570 YES YES

WWW.KOLPIN.EU 43

KAWASAKI



250 Bayou 2x4 2002-2008 KOL15-2560 YES YES300 Bayou 4x4 2003 KOL15-2510 YES YES300 Prairie < 2002 KOL15-2550 YES YES360 Prairie 2002-2012 KOL15-2590 YES YES650 Brute Force 4x4 2005-2011 KOL15-2570 YES YES650 Brute Force 4x4i 2006-2009 KOL15-2610 YES YES650 Prairie 4x4 2002-2003 KOL15-2570 YES YES700 Twin Prairie 4x4 2004-2006 KOL15-2570 YES YES700 KFX 2004-2009 KOL15-2600 YES YES750 Brute Force 4x4i 2005-2016 KOL15-2610 YES YES

WWW.KOLPIN.EU

750 Brute Force 4x4i 2005-2016 KOL15-2610 YES YES

POLARIS



250 4x4 / 4x6 1989-2001 KOL15-3520 YES YES250 Xplorer 4x4 2002 KOL15-3562 YES YES300 4x2 / 4x4 1996-1999 KOL15-3530 YES YES300 Hawkeye / Sportsman 2006-2008 KOL15-3640 YES YES325 Magnum < 2001 KOL15-3570 YES YES330 Magnum / ATP 2003-2005 KOL15-3591 YES YES330 Sportsman ETX 2015 KOL15-3591 YES YES335 Sportsman < 2000 KOL15-3550 YES YES350 2x4 / 4x4 / 6x6 < 1993 KOL15-3520 YES YES400 2x4 / 4x4 1994-1997 KOL15-3520 YES YES400 Scrambler 1998-2002 KOL15-3541 YES YES400 Sportsman 2001 KOL15-3550 YES YES400 Sportsman 2002-2005 KOL15-3591 YES YES400 Sportsman H.O. 2008-2010 KOL15-3640 YES YES400 Sportsman H.O. 2011-2014 KOL15-3591 YES YES425 Magnum 4x4 / 4x6 < 1998 KOL15-3520 YES YES445 Diesel 1999 KOL15-3550 YES YES450 Sportsman 2006-2007 KOL15-3591 YES YES500 Magnum 1999-2001 KOL15-3570 YES YES500 Scrambler 1998-2005 KOL15-3541 YES YES500 Sportsman 6x6 2000-2002 KOL15-3562 YES YES500 Sportsman H.O. / EFI 2003-2013 KOL15-3591 YES YES550 Sportsman (all) 2009-2014 KOL15-3670 YES YES570 Sportsman (all) 2014-2015 KOL15-3591 YES YESACE (all) 2014-2015 KOL15-3680 YES YES600 Sportsman 2003-2004 KOL15-3591 YES YES700 Sportsman 2002-2007 KOL15-3591 YES YES700 Sportsman X2 2008 KOL15-3660 YES YES800 Sportsman (excl. 6x6) 2005-2014 KOL15-3591 YES YES800 Sportsman X2 2007-2009 KOL15-3660 YES YES850 Sportsman (all) 2009-2015 KOL15-3670 YES YES1000 XP Sportsman (All) 2015 KOL15-3670 YES YES

44 WWW.KOLPIN.EU

ATV APPLICATION CHART MID MOUNTS

SUZUKI



250 2x4 1997-2001 KOL15-4521 Yes Yes250 Ozark 2x4 2002-2006 KOL15-4570 Yes Yes280 King Quad < 1998 KOL15-4521 Yes Yes300 King Quad 1999-2001 KOL15-4521 Yes Yes400 Eiger 2002-2004 KOL15-4550 Yes Yes400 Eiger 2005-2007 KOL15-4581 Yes Yes400 King Quad 2008-2013 KOL15-4581 Yes Yes450 King Quad 2008-2010 KOL15-4590 Yes Yes500 King Quad 2009-2016 KOL15-4590 Yes Yes500 Quad Runner < 2002 KOL15-4550 Yes Yes500 Vinson 2002-2007 KOL15-4550 Yes Yes700 Twin Peak 2004 KOL15-2570 Yes Yes700 King Quad 2005-2007 KOL15-4590 Yes Yes750 King Quad 2008-2016 KOL15-4590 Yes Yes

YAMAHA



350 Bruin 2004-2006 KOL15-5590 Yes Yes350 Raptor 2005-2006 KOL15-5531 Yes Yes350 Wolverine < 2005 KOL15-5531 Yes Yes350 Grizzly 2007-2014 KOL15-5590 Yes Yes400 Big Bear 2000-2012 KOL15-5531 Yes Yes400 Kodiak 2003-2006 KOL15-5590 Yes Yes450 Grizzly (450 EPS) 2007-2014 KOL15-5590 Yes Yes450 Kodiak 2003-2006 KOL15-5590 Yes Yes450 Wolverine 2006-2009 KOL15-5630 Yes Yes550 Grizzly 2009-2015 KOL15-5640 Yes Yes600 Grizzly < 2001 KOL15-5520 Yes Yes660 Grizzly 2002-2008 KOL15-5640 Yes Yes700 Grizzly 2007-2016 KOL15-5640 Yes Yes700 Kodiak 2016 KOL15-5640 Yes Yes

WWW.KOLPIN.EU 45

UTV APPLICATION CHART MID MOUNTS

HONDA



500 Pioneer ALL KOL34-1050 Yes Yes700 Pioneer ALL KOL34-1070 Yes Yes1000 Pioneer ALL KOL34-1010 Yes Yes

KAWASAKI



Pro FX / T ALL KOL34-2010 Yes YesTyrex KOL34-2020 Yes Yes

POLARIS



Ranger Full Size 2013 > KOL34-3010 Yes YesRanger Mid Size 2010 > KOL34-3020 Yes YesGeneral ALL KOL34-3040 Yes YesRZR KOL34-3030 Yes Yes

YAMAHA



Wolverine UTV ALL KOL34-5010 Yes YesViking ALL KOL34-5020 Yes Yes

BRP



Commander ALL KOL34-7010 Yes YesDefender ALL KOL34-7020 Yes Yes

46 WWW.KOLPIN.EU

WINCH SYSTEM

KOLPIN WINCH » Center-spool design » Internal gearing specifically designed for

plowing » All steel, 3-stage planetary gear train for

reliability/smooth operation » Weather resistant sealed drums and motor » Ergonomic dial for free spooling-to-clutch

engagement » Automatic mechanical cable drum brake » Pre-wound with 50’ (15 meters) steel cable or

synthetic rope » Heavy duty load relay protects motor » Heavy duty 6 gauge wiring » Color-coded quick connect wiring harness » Premium handlebar mount controls with

wiring harness » 4-way roller fairlead, mounting plate and

hardware included

KOL25-9250 2500# WinchKOL25-9350 3500# WinchKOL25-9355 3500# Winch w/Syn. RopeKOL25-9450 4500# Winch

KOL25-9250

KOL25-9450

KOL25-9355

KOL25-9350

WWW.KOLPIN.EU 47

» Heavy duty, durable construction and fully sealed for maximum longevity

» Designed for vehicle recovery and/or plow lifting

» Automatic brake and sealed contactor for smooth, reliable performance

» UTV/ATV model specific winch mounts required

» Limited Lifetime Warranty

2500 LB WINCH » Rated Line Pull: 2500 lbs. (1134 kg) » Gear Ration: 136:1 » Gear Train: 3 Stage Planetary Gear » Motor: 12V DC, 1.2Hp (0.9 kw) Permanent magnet. (Sealed) » Drum Size: 2” X 2.9” (50.8 mm X 73.66 mm) » Mounting Bolt Pattern: 3.0” X 4.88” (76.2 mm X 124 mm) » Clutch: Free-spooling, Cam Activated » Cable: 50 ft (15 m) X 3/16 (4,8mm)

Fairlead: Roller » Rated Line Pull: 2500 lbs (1134 kg) » Dimensions: 13.3” X 4.5” X 4.7” (33,8 x 11,4 x 11,9 cm) » Weight: 18.2 lbs. (8,3 kg)

KOL85025 Steel CableKOL85026 Synthetic Cable

ARCTIC CAT

MODEL YEAR KIT NO.400 4x4 2005-2014 OEM Equipped450 4x4 2010-2012 OEM Equipped500 4x4 2005-2009 OEM Equipped500 4x4 2015-2016 OEM Equipped550 4x4 2009-2016 OEM Equipped650 4x4 2005-2011 OEM Equipped700 4x4 2006-2016 OEM Equipped700 4x4 Diesel 2007-2012 OEM Equipped1000 4x4 2008-2016 OEM EquippedProwler 550 2006-2011 OEM EquippedProwler 700 2006-2011 OEM EquippedProwler 1000 2009-2016 OEM EquippedWildcat Trial 2014-2015 OEM Equipped

CAN-AM

MODEL YEAR KIT NO.330 Outlander 2004-2005 KOL25-7060400 Outlander 2003-2014 KOL25-7060450/500/570 Outlander L 2015-2016 OEM Equipped500 Outlander 2007-2012 KOL25-7060500 Outlander 2013-2014 OEM Equipped570 Outlander 2016 OEM Equipped650 Outlander 2008-2012 KOL25-7060650 Outlander 2013-2016 OEM Equipped800/800R Outlander 2006-2011 KOL25-7060800R Outlander Max 2012 KOL25-7060800R/850 Outlander 2012-2016 OEM Equipped1000 Outlander 2012-2016 OEM Equipped800 Commander 2011-2014 KOL25-7070800/1000 Renegade 2012-2013 KOL1009201000 Commander 2011-2016 KOL25-7070Commander 2010-2014 KOL100840Maverick (all) 2013-2016 KOL25-7080Outlander G1 Mount 2002-2013 KOL100525Defender (all) ALL OEM Equipped

WINCH MOUNT APPLICATION CHART

48 WWW.KOLPIN.EU

WINCH MOUNT APPLICATION CHART

HONDA

MODEL YEAR KIT NO.TRX 300 1993-2000 KOL25-1042TRX 350 Rancher 2000-2003 KOL25-1080TRX 350 Rancher 2004-2006 KOL25-1081TRX 350 Rancher 2000-2006 KOL100505TRX 400 Foreman < 2002 KOL25-1061TRX 400 Rancher 2004-2007 KOL25-1081TRX 400 Rancher 2004-2007 KOL100505TRX 420 Rancher (all) 2007-2013 KOL25-1210TRX 420 Rancher (all) 2007-2013 KOL100705TRX 420 Rancher (AT-IRS) 2009-2014 KOL25-1210TRX 420 Rancher (non AT-IRS) 2014 KOL25-1240

TRX 420 Rancher (all) 2015-2017 KOL25-1240TRX 450 Foreman 1998-2004 KOL25-1061TRX 450 Foreman 1998-2004 KOL100545TRX 500 Rubicon 2003-2004 KOL25-1090TRX 500 Rubicon 2005-2006 KOL25-1161TRX 500 Rubicon 2007-2014 KOL25-1200TRX 500 Rubicon 2007-2014 KOL100585TRX 500 Rubicon (all) 2015-2016 KOL25-1240TRX 500 Foreman 2007-2011 KOL25-1200TRX 500 Foreman 2007-2011 KOL100585TRX 500 Foreman 2012-2013 KOL25-1220TRX 500 Foreman (all) 2014-2016 KOL25-1240TRX 650 Rincon 2003-2005 KOL25-1190TRX 650 Rincon 2003-2005 KOL100540TRX 680 Rincon 2006-2017 KOL25-1190TRX 680 Rincon 2006-2017 KOL100540Big Red MUV 700 2009-2013 KOL25-1180Pioneer 500 ALL KOL25-1250Pioneer 700 (all) ALL KOL25-1230Pioneer 1000 (all) ALL KOL25-1260

JOHN DEERE

MODEL YEAR KIT NO.XUV 625i/825i/825i S4 2012-2016 KOL25-8810XUV 855D/855D S4 2012-2016 KOL25-8810

KAWASAKI

MODEL YEAR KIT NO.360 Prairie 2002-2005 KOL25-2150360 Prairie 2006-2013 KOL25-2290650 Brute Force 4x4i 2006-2009 KOL25-2310650 Brute Force 4x4i 2010-2013 KOL25-2310650 Prairie 4x4 2002-2003 KOL25-2131700 Twin Prairie 4x4 2004-2006 KOL25-2131750 Brute Force 4x4i 2005-2016 KOL25-2310Mule 600/610/610 XC 2007-2016 KOL25-2240Mule 600/610/610 XC 2007-2016 KOL100575Mule 3010/Diesel 2005-2008 OEM EquippedMule 4000/4010 2009-2012 KOL25-2330Mule 4000/4010 2009-2012 KOL100845Mule 4010 Trans/Diesel 2013-2016 KOL25-2340Teryx 750 2008-2012 KOL25-2320Teryx 750 2008-2012 KOL100700Teryx4 750 2012 KOL25-2320Tyrex 800 / Tyrex4 800 2013-2016 KOL25-2320Mule PRO-FXT/FX 2015-2016 KOL25-2350Mule PRO-DXT/DX 2015-2016 KOL25-2350

POLARIS

MODEL YEAR KIT NO.300 Xplorer 4x4 < 1998 KOL25-3043300 Sportsman 2008 KOL25-3280325 Magnum 2000-2002 KOL25-3043330 Magnum & ATP 2003-2005 KOL25-3043330 Sportsman ETX 2015 KOL25-3350335 Sportsman 1999-2000 KOL25-3043400 Sportsman 2001-2003 KOL25-3043400 Sportsman 2004 KOL25-3190400 Sportsman H.O. 2008-2010 KOL25-3280400 Sportsman H.O. 2011-2014 KOL25-3330400 Xplorer 4x4 1995-2001 KOL25-3043425 Xpedition 4x4 2000-2002 KOL25-3043445 Diesel 1999 KOL25-3043450 Sportsman 2006 KOL25-3200450 Sportsman 2007 KOL25-3260450 Sportsman (all) 2016 KOL25-3350500 Magnum 1999-2002 KOL25-3043500 Sportsman 6x6 2000-2003 KOL25-3043

WWW.KOLPIN.EU 49

POLARIS (CONTINUED)

MODEL YEAR KIT NO.500 Sportsman H.O. & EFI 2003 KOL25-3043500 Sportsman 2004 KOL25-3190500 Sportsman H.O. & EFI 2005-2007 KOL25-3200500 Sportsman (all) 2011-2013 KOL25-3330500 Sportsman H.O. & EFI 2008-2010 KOL25-3260500 Sportsman X2 2006-2010 KOL25-3260550 Sportsman (all) 2009-2014 KOL25-3320570 Sportsman (all) 2014-2016 KOL25-3350570 Sportsman 6x6 2017 KOL25-3350600 Sportsman 2004 KOL25-3190700 Sportsman 2004 KOL25-3190700 Sportsman 2005-2007 KOL25-3200700 Sportsman X2 2008 KOL25-3260800 Sportsman 2005-2006 KOL25-3200800 Sportsman 2007-2010 KOL25-3260800 Sportsman X2 2007-2009 KOL25-3260800 Sportsman 2011-2014 KOL25-3330850 Scrambler (all) 2013-2016 KOL25-3350850 Sportsman (all) 2009-2016 KOL25-33501000 Scrambler (all) 2014-2016 KOL25-33501000 XP Sportsman (all) 2015-2016 KOL25-3350ACE (all) 2014-2016 KOL25-3350Ranger EV/LSV (mid-size) 2010-2014 KOL25-3310Ranger 2009-2013 KOL100764Ranger STD 2005-2009 KOL100563KRanger (full-size) 2009-2013 KOL100760Ranger 400 4x4 2010-2012 KOL25-3310Ranger 400 4x4 (mid-size) 2010-2012 KOL100820Ranger 400 4x4 2010-2012 KOL100824Ranger 500 4x4/Crew 2005-2008 KOL25-3221Ranger 500 4x4 2010 KOL25-3300Ranger 500 4x4 2010 KOL100824Ranger 500 4x4 (mid-size) 2011-2014 KOL25-3310Ranger 500 4x4 (mid-size) 2011-2014 KOL100820Ranger 570 4x4 (mid-size) 2014-2015 KOL25-3310Ranger 570 4x4 (full-size) 2016 KOL25-3310Ranger 570/Crew (full-size) 2015-2016 KOL25-3340Ranger 700 4x4/Crew 2006-2008 KOL25-3221Ranger 700 4x4 2009 KOL25-3300Ranger 800 (mid-size) 2013-2015 KOL25-3310Ranger 800 (mid-size) 2013-2015 KOL100820Ranger 800 2010-2014 KOL100824

POLARIS (CONTINUED)

MODEL YEAR KIT NO.Ranger 800/Crew (full-size) 2010-2014 KOL25-3300Ranger 800 6x6 2010-2016 KOL25-3300Ranger 900 Diesel/Crew 2011-2014 KOL25-3300Ranger XP 900 (all) 2013-2016 KOL25-3340Ranger 900 Diesel HST 2014-2016 KOL25-3340Ranger 1000 Diesel/Crew 2014-2016 KOL25-3340General ALL KOL25-3360RZR 570 (all) 2012-2016 KOL25-3270RZR 800 (all) 2008-2014 KOL25-3270RZR 900 XP 2011-2013 KOL100765RZR 900 (all) 2015-2016 KOL25-3360RZR XP 1000 (all) ALL KOL25-3360G2 UTV Mount ALL KOL100630G4 Mount ALL KOL100430

YAMAHA

MODEL YEAR KIT NO.550 Grizzly 2009-2014 KOL25-5250660 Grizzly 2002-2008 KOL25-5171700 Grizzly 2007-2015 KOL25-5250700 Grizzly 2016 KOL25-5290700 Kodiak (all) 2016 KOL25-5290Rhino 450 2006-2009 KOL25-5260Rhino 660 2004-2007 KOL25-5260Rhino 700 2009-2013 KOL25-5260Viking 700 (all) ALL KOL25-5270Wolverine (all) ALL KOL25-5280

SUZUKI

MODEL YEAR KIT NO.400 King Quad (all) 2008-2016 KOL25-4210450 King Quad 2007-2010 KOL25-4100500 King Quad (all) 2009-2016 KOL25-4100700 Twin Peak 2004 KOL25-2131700 King Quad 2005-2007 KOL25-4100750 King Quad (all) 2008-2016 KOL25-4100

50 WWW.KOLPIN.EU

WINCH SPARES

ROLLER FAIRLEAD » For KOL85025 & KOL85026

KOL85069

HOOK » For:

KOL85025KOL85026

KOL85060

SYNTHETIC ROPE COVER

» For: KOL85026

KOLHK-125

MINI ROCKERSWITCH

» For: KOL85025KOL85026

KOL85066

HAND HELD SWITCH » For KOL85025 and KOL85026

KOLHK-125

Choose your 2” (5,1cm) Receiver Hitch & Suspension lockout (pg. 46-47)

Step 1 Add the 3-point hitch & tool bar (pg. 48)Step 2 Choose your Implement(s)

(pg. 49-51)Step 3

321

Kolpin® provides the largest assortment of the quality tools you need to put your ATV or UTV to work. Whether you’re establishing a wildlife food plot or just maintaining your property, Kolpin® has the right accessory for the job. Our complete line of durable, heavy duty Category “0” agricultural implements includes disc plow, cultivator, landscape rake, chisel plow, rear blades/scrapers & a growing line of hitches.

KOLPINTECH YOUR COMPLETE SOURCE OF ATV & UTV IMPLEMENTS - EASY AS 1 - 2 - 3

DIRTWORKS ®

WWW.KOLPIN.EU 51

DIRTWORKS ®

KOL85200

KOL85210

SUSPENSION LOCKOUT » Eliminate rear suspension sag

when under load » Highly recommended for use with the Kolpin®

DirtWorks® 3-Point hitch system or for any heavy load » Can be used for pulling a boat, trailer, ice house or

even during ATV pulls » Fits most ATV’s with independent rear suspension » KOL85210 fits Can Am Models 2012 and earlier with

Trailing Arm Suspension Only

KOL85200 Universal IRSKOL85210 Can AmKOLSLUSA Universal Swingarm

KOLSLUSA

UTV 2” (5,1CM) RECEIVER HITCH

KOL90100 Honda Foreman Universal model

KOL90260 Ranger RZR All Ranger RZR models

» Heavy-duty 2” receiver hitch for UTV’s

KOL90100

YAMAHA RHINO HITCH KITThe Kolpin Universal UTV Frame Support Kit provides added frame stability, support and transfers the torque load from the hitch to the frame for use with our DirtWorks 3-Point Hitch System.

KOLHKRHINO

WWW.KOLPIN.EU 51

52 WWW.KOLPIN.EU

KOL85150 KOL85180KOL85155

KOL85610 KOL85630KOL85620 KOL85640KOL85610 KOL85620 KOL85630 KOL85640

DIRTWORKS ®

52 WWW.KOLPIN.EU

KOL85610 KOL85620 KOL85630 KOL85640

MULTI HITCH & 2" (5,1CM) UTV RECEIVER HITCH

KOL85610 3-Way 1 1/4” (3,2cm) Multi Hitch

Heavy-duty drawbar fits 1 1/4” (3,2cm) factory receiver hitches

KOL85620 3-Way 2” (51,cm) Multi Hitch

Heavy-duty drawbar fits 2” (5,1cm) factory receiver hitches

KOL85630 Bolt on 3 Way Hitch(Light Duty)

For 3/4” (1,9cm) shaft trailer ball (sold separately)

KOL85640 Bolt on ATV Receiver Hitch (Light Duty)

Fits most ATV’s with factory hitch, For 3/4” (1,9cm) shaft trailer ball, Light Duty use only, not for use with DirtWorks®

» Kolpin® offers a full selection of receiver hitch options

» Long lasting powder coat finish for ground engaging & heavy towing capabilities

» For off-road use only

KOL85150 KOL85180KOL85155KOL85155

ATV 2" (5,1CM) SWINGARM RECEIVER HITCH

KOL85150 Honda Foreman Fits most Honda Foreman and Rubicon Models (Twin Shocks)*

KOL85155 Honda Fits most Honda Rancher Models (Single Shock)* also fits 2012 Rubicon Foreman (Single Shock)*

KOL85180 Suzuki (Eiger/Vinson) Fits most Suzuki ATV Models with straight axle*

» Heavy duty Class 1 frame mount-ed 2” (5,1cm) receiver hitch


» 200 lb. (91kg) max tongue weight


ATV 2" (5,1CM) IRS RECEIVER

KOL85100 Universal Fits most ATV models with Independent Rear Suspension

KOL85110 Can Am Outlander Can Am ATV Models with trailing arm suspension

KOL85145 Honda Rancher AT Honda Rancher AT Independent Suspension Models

KOL85170 Polaris X2/Touring Polaris X2 and Touring models

KOL85185 Polaris Sportsman 2011 - current Polaris Sportsman New Chassis 400/500/HO/800

KOL85190 Polaris Sportsman XP 2009 ONLY Polaris Sportsman XP Models

KOL85195 Polaris Sportsman XP 2010-2013 Polaris Sportsman XP Models / (Not Touring Models)

» 2” (5,1cm) IRS Receiver Hitches are frame mounted


» Kolpin® - The heaviest duty hitches on the market!


KOL85100 KOL85110 KOL85145 KOL85170 KOL85195KOL85190KOL85185

WWW.KOLPIN.EU 53

WHSO3HD

HD 3-POINT HITCH SYSTEM » Category “0” 3-point hitch with a 20” (51cm) tool bar width

& 5/8” (1,6cm) diameter pins » Heavy-duty 1 1/2” (3,8cm) square tubing mainframe for

use on ATV’s or UTV’s » Fits any 2” (5,1cm) automotive style receiver hitch » Convenient rocker switch can be mounted to your

handle bars » 12v electric actuator lift system with 20 amp maximum

Current draw » 250 lbs. (114 kg) lift capacity at the tool bar with

300 lbs. (137 kg) down pressure capacity » 15” (38cm) vertical lift at the tool bar » Fully adjustable lift arms & top link » Additional frame support kit may be required,

please check out our suspension locks & frame support kits

» Requires Accessory Tool Bar (sold separately)

KOLWHS03HD

ACCESSORY TOOL BAR » 48” (122cm) Tool Bar for ATV’s or UTV’s, 60” (152cm) Tool Bar UTV’s » Category “0”, 5/8” (1,6cm) hitch pins with 20” (51cm) spacing » Heavy-duty, black powder coated tool bar » Allows a quick change from one implement to another » Required to use with any DirtWorks® Implements, designed to slide

into, or plug into the tool bar for use with the 3-Point Hitch

KOLATB48 48” (122cm) WIDTH (ATV)KOLATB60 60” (152cm) WIDTH (UTV)

ACCESSORY TOOL BARACCESSORY TOOL BAR»

»

ACTUATOR FOR HD 3-POINT HITCH SYSTEM

KOL11038

54 WWW.KOLPIN.EU

DIRTWORKS ®

LANDSCAPE RAKE » Clear trails, groom horse corrals, rake the beach or maintain your

gravel driveway » Five position angling provides more customized results » (21) 1 5/16” (3,3cm) hardened landscape rake tines » Requires either the 48” (122cm) or 60” (152cm) Accessory Tool Bar

& 3-Point Hitch System (sold separately) » 60” (152cm) width

KOLLSR60

CHISEL PLOW/SCARIFIER » 2 applications in one – use as a Blade Scarifier OR as a Chisel

Plow » Hardened steel teeth loosen hard packed surfaces such as

driveways, sand trails, or can be used to cut into hard, solid sod » Adjustable blade height for specific ground type & extra clear-

ance during transportation » (6) ½” (1,3cm) heavy-duty, hardened steel plow teeth » Requires either the 48” (122cm) or 60” (152cm) Tool Bar &

3-Point Hitch System (sold separately)

KOL86100

** Helpful Hint: We recommend the use of an additional tool bar for speedy changeover of the Chisel Plow/Scarifier when utilizing other DirtWorks® implements

DISC PLOW » Our best selling implement is also the most versatile -

It cuts.. It digs.. It slices.. It dices.. » Two individual gangs of (4) discs easily attach to the Dirt-

Works® accessory tool bar » Five adjustable cutting angles accommodate different soil

types & conditions » Live axle & sealed ball bearing design » 54” (137cm) width, Disc dimensions: 14” (36cm) » Requires the 48” (122cm) or 60” (152cm) Accessory Tool

Bar & 3-Point Hitch System (sold separately) » Price includes 2 Parts (Hardware & Discs)

KOLDP8

WWW.KOLPIN.EU 55

KOLWHS03TABH

LIGHT-DUTY HITCHOur Kolpin Quad Receiver Hitch provides three mounting options; ball, clevis and tow hook mount. This hitch mounts to your receiver hitch tube and is perfect for light weight trailer and towing applica-tions. Not recommended for use with the Kolpin DirtWorks 3-Point Hitch System.

» Quickly and easily mounts to most ATV’s equipped with a factory hitch, please review our fit list for model specifics.

KOL97120

TOW BAR BALL » 50mm outside diameter

KOL96097

REAR BLADE » Easy one pin mounting » Five position angling » 13” (33cm) blade height with a replace-

able & reversible wear bar for long life » Requires either the 48” or 60” Accessory

Tool Bar (sold separately) » Incorporated flange plates allow our

popular Box Scraper attachment (sold separately) to be bolted on to quickly convert the blade to a box scraper

KOLFRB60 60” Rear Blade

KOL97120

KOL85500

GARDEN TRACTOR 2” RECEIVER HITCH

» John Deere X500 » Heavy Duty 2” receiver hitch for your garden tractor

KOL85500

3-POINT TRAILERThis innovative trailer design provides an alternative for the Dirt-Works 3-Point Hitch System when using with machines 350cc or less. The trailer accessory is also perfect for vehicles that do not have a heavy duty receiver hitch available. The 3-Point Trailer does not include the 3-Point Hitch System.

» 18” pneumatic tires » Secures with a clevis pin mount » Requires 3-Point Hitch System and

Accessory Tool Bar (Sold Separately) » 2 Boxes (KOLWHS03TA and

KOLWHS03TA2)

KOLWHS03TA (Excluding BALL HITCH)KOLWHS03TABH BALL HITCH

56 WWW.KOLPIN.EUWWW.KOLPIN.EU

CULTIVATOR SET » Great implement for the initial preparation of hard packed

soil » Cultivator tines break up compacted ground providing

deeper penetration & more aeration when preparing your seed bed

» Agricultural grade Danish “S” tines feature reversible sweeps

» Includes six each of the “S” tines with 1 1/2” (3,8cm) sweeps

» Requires either the 48” (122cm) or 60” (152cm) Tool Bar & 3-Point hitch system (sold separately)

KOLCT036

48” (122CM) REAR BLADE » Easy one pin mounting » Five position angling » 13” (33cm) blade height with a replaceable & reversible

wear bar for long life » Requires the 48” (122cm) Accessory Tool Bar

(sold separately) » Incorporated flange plates allow our popular Box Scraper

attachment (sold separately) to be bolted on to quickly convert the blade to a box scraper

KOLFRB48

4’ (122CM) LIGHT DUTY DRAG HARROW » Attaches quickly to your ATV, UTV or garden tractor to help loosen

compacted dirt » Ideal for leveling dirt/gravel, seeding food plots, prepping for sod,

or even dragging ball fields » Made from heavy-duty, powder coated steel framing & galvanized

mesh » Light weight for easy handling & storage » 4’ (122cm) W x 5’ (152cm) L = 20 square feet (1,9 square meters)

KOL86840

** Helpful Hint: We recommend the use of a separate tool bar for mounting convenience of the cultivator set if you are utilizing other DirtWorks® implements

DIRTWORKS ®

WWW.KOLPIN.EU 57

NEW

UTV REAR/SIDE MIRROR » Rear and/or side mounting options » Easy to adjust with the quick-pivot design » Clamp design allows overhead mounting in

your UTV with a roof installed » The wide angle, convex lens provides high

visibility » Over-molded grips help to reduce vibration » Accommodates up to 1.75” (4,4cm) tubing » Dimensions: 10” (25cm) x 3” (7,6cm)

KOL98300

KXP ATV MIRROR » Fully adjustable 4” (10cm) mirror » Safely view who is behind you » Easy installation - no tools required » Quick on/off - by rotating the power twist

handle » Compatible with Polaris® composite ATV

racks using the Polaris® Lock & Ride® System

KOL97205 Polaris ATV

ATV MIRROR » Easily mount to handle bars or

front tubular racks (hardware included)

» Fully adjustable 4” (10cm) mirror

» Kwik clip allows for easy posi-tioning & removal

» Safely view who is behind you » Accommodates 5/8” (1,6cm) to

1” (2,5cm) diameter tubing » Can be mounted on the left or

right hand side of the rack

KOL97200

HAND GUARD WITH MIRROR

» Constructed of durable molded polyurethane with Kolpin’s trademark Rhino Rib® reinforcement for added protection

» Features round, 3” (7,6cm) fish-eye rear view mirror

» Universal fit design mounts directly to mostATV handlebars

» Does NOT fit Can-Am ATV’s with hand guards or Kawasaki Brute Force Mod-els with plastic handlebar fascia

» Includes (2) hand guards with mirror & hardware

» Fits 7/8” (2,2cm) Handlebars only

KOL97300

THROTTLE MASTER » Eliminate fatigued or sore thumbs » More precise throttle control » Easy universal bolt on design » Unique design allows blade length to be

adjusted for individual preference » Available in standard or heated version » Heated version features off, hi-low

temperature settings

KOL98005 Standard

HANDY THROTTLE™

» The Handy Throttle™ eliminates thumb fatigue to prolong your ride without changing the mechanical function of the factory thumb throttle

» Handy Throttle™ can be used on ATV’s, watercraft and snowmobiles that have a standard 7/8” handle bar and a thumb throttle

» Fast, easy installation » Made of high quality, UV resistant

reinforced plastic that withstands extreme temperatures

KOL98020

ACCESSORIES

58 WWW.KOLPIN.EU

NEW

ACCESSORIES

UTV SIDE MIRROR » Package includes a set of two mirrors

(Passenger and driver side) » Convex mirror provides wide viewing

range and image stabilization » Shatter-proof tempered glass » Ball Socket Joint for unlimited viewing

angles » Mirror Dimensions:

4.125” (10,5cm) x 7.75” (19,7cm) » Includes all clamps and hardware to fit

1 5/8” (4,1cm) - 2” (5,1cm) round tubing » Fits almost all UTV’s available » Will NOT fit Polaris RANGER profile

Tubing (use KOL98317)

KOL98315 (Pair)

RANGER UTV SIDE MIRROR

» Package includes a set of two mirrors (Passenger and driver side)

» Convex mirror provides wide viewing range and image stabilization

» Shatter-proof tempered glass » Ball Socket Joint for unlimited viewing


4.125” (10,5cm) x 7.75” (19,7cm) » Includes metal clamps to fit Polaris

Ranger Pro-Fit profile tubing » Works with cab systems (Polaris Pro-

Fit Cab and Kolpin Cab)

KOL98317 (Pair)

UTV REAR MIRROR » Convex mirror provides wide viewing

range and image stabilization » Shatter-proof tempered glass » Ball Socket Joint for unlimited viewing


4.5” (11,4cm) x 8” (20,3cm) » Includes clamp and hardware to fit

most 1.375” (3,5cm) - 2” (5,1cm) tubing » For specific model fitment, please visit

kolpin.eu

KOL98310

NEWNEW

WWW.KOLPIN.EU 59

ROCK BLOCKER » Fits Compact, Mid-Size, Full-Size Vehicles and Dually Pickup

Trucks » Adjustable height and width for perfect fit-up. Width adjusts

66” (168cm) to 94” (239cm) » Protect your ATV, Snowmobiles, Motorcycles, Vehicles and

other towables » Secures to a 2” (5,1cm) ball mount » Flaps are 24” (61cm) x 24” (61cm) x 3/8” (1cm) thick rubber » Easy Installation

KOL85300

LOCK-IT RITE TRAILER SYSTEM » Secure an ATV or UTV to your trailer for safe transport » Faster and stronger than straps alone » Prevents forward, backward, and side movement » When not in use, simply remove the upright arm, leaving

only the base plate attached to the floor of your trailer » Takes up minimal floor space » Comes with bolts for wood or steel trailer beds

KOLLGD-TRL-16

ATV BIKINI » Protect your feet and legs from mud and water » One size fits all style utility ATVs » Made of durable neoprene fabric » Easy to clean » Easy installation » Sold as a pair

KOL91890

ALL TERRAIN GLOVES » Versatile form-fitting glove designed for work or recreation » Padded, double stitch palm pads » Airprene knuckle for riding comfort » Secure wrist closure

KOL96500 MediumKOL96501 LargeKOL96502 X-Large

60 WWW.KOLPIN.EU

FLAT PACK » Includes all of the tools a rider will

need to fix up to 10 flats » Tools are secured inside a compact,

easy-to-use pump » Easily straps to ATV racks or

stores inside gear box » Dimensions:

9 1/2” (24,1cm) L x 3” (7,6cm) Diameter

KOL89500

TIRE REPAIR KIT » Everything you need to repair & inflate

multiple ATV tires » Packed conveniently in a handy storage

pouch » Includes: (3) CO2 cartridges (1 to 2

cartridges will fill most ATV tires), Reg-ulator/adapter tool, 4” (10cm) tire seals

» Tire roughing tool plus installation tool

KOL89510

ATV/UTV TOOL KIT » Easy to carry for trailside repairs » Compact durable carry case » Metric tools » 18 Piece Kit includes:

- Fabric Case with Zipper - 8” (20,3cm) Adjustable Wrench, - 14 mm Combination Wrenches- 5” (12,7cm)Locking Pliers- Spark Plug Socket 13/16” (2,1cm)- Spark Plug Socket 5/8” (1,6cm)- Spark Plug Handle- Multi Function Screw Driver- Electrical Tape- 3,4,5 & 6mm Hex Key Wrench- Nylon Zip Tie- Square- Cotton Weave Rag,- Air Pressure Gauge

KOL89515

SEAT COVER » Designed to fit small & Mid-Size ATV’s up to 400cc » Rugged 600D nylon for long wear & protection of your ATV seat » Available in Black or Mossy Oak® Breakup™

» Dimensions: 13” (33cm) front, 15 1/2” (39cm) back, 26” (66cm) length » Does NOT work on Sportsman 500

KOL93645 BlackKOL93640 Mossy Oak® Breakup™

GEL-TECH™ SEAT COVER » Fits most ATV’s » Gel padding & ergonomic design pro-

vides maximum cushioning & tem-perature control for exceptional riding comfort

» Easy to install with Velcro straps » Dimensions: 14” (36cm) front, 21” (53cm)

back, 30” (76cm) length

KOL91855 BlackKOL91865 Mossy Oak® Breakup™

ACCESSORIES

WWW.KOLPIN.EU 61

HONDA & UNIVERSAL BOLT-ON ADAPTER

» Bolts on over OEM spark arrester using existing bolts

» 3 bolt design includes gasket. » 53520: Fits Honda TRX 250, 300, 350,

400, 450 & Universal for other flat or concave OEM Muffler Outlets

» Includes gasket & self-tapping screws » 3 1/4” (8,3cm) diameter flange

1 1/4” (3,2cm) OD tailpipe

KOL53520

STEALTH EXHAUST SYSTEM 2.0 WITH HEAT SHIELD

» Designed to be used in conjunction with your stock system

» Reduces ATV & UTV exhaust noise by up to 5-7 decibels with no loss in performance

» Universal design fits most ATV’s or UTV’s with a four-stroke engine

» High flow/low restriction muffler uses baffled design - no packing to burn out

» No need for cumbersome welding or vehicle modifications (in most cases)

» Honda Models require an additional adapter (not included)

» **Some machines may require adapters or fabrication

» Does NOT fit John Deere XUV 550/850, Yamaha Viking, Honda Pioneer or 2014 - Current Polaris Rangers due to larger exhausts

» Dimensions: 12.25” (31cm) L x 4.5” (11cm) diameter

KOL53570 Black

CARGO SPYDERSecure your gear with this completely adjust-able shock cord storage system. The adjust-able design easily accommodates various cargo sizes & shapes, providing a secure fit.

» Ideal for ATV, scooter, motorcycle & other vehicle use

» Shock cord diameter .28 in (0,7cm) » Shock cord length 27.6 in (70cm) » By diagonal shock cord length 49.2 in

(125cm)

KOL95175

FIRE EXTINGUISHER BRACKET

» Fits all 1.25 (3,2cm) - 2” (5,1cm) roll bars

» Heavy-duty bracket » Holds most household or shop

fire extinguishers » Fire extinguisher not included » Fire extinguisher is required to be

carried on UTV’s in some states

KOL26600

ATV COVER » Light duty storage cover with reinforced

tie-down grommets » Available in Black only » Standard size fits most ATV’s 400cc &

smaller » Standard Dimensions: 85” (216cm) L x

35” (89cm) W x 32” (81cm) H » XXL Dimensions: 95” (241cm) L x

50” (127cm) W x 50” (127cm) H*** Special note: cover must be removed for trailering

KOL95110 StandardKOL95104 XXL

FIRE EXTINGUISHER

62 WWW.KOLPIN.EU

ACCESSORIES

I/O LensGray Lens

LOW PRESSURE TYRE GAUGE » Keeps ATV tyres at optimum pressure » Rubber shock absorbing boot to prevent damage

in the field » White dial face with black numerals » 360° swivel-angle chuck » 0-30 PSI range

KOL96810

CROSSOVER SPORT GLASSES » Kolycarbonate lenses exceed ANSI Z87.1

standards & provide impact resistance from trail debris » Fitted foam helps to keep out dust & debris » Superior peripheral vision vs traditional goggles » Removable/Adjustable goggle strap » Gray, anti-Fog treated lenses designed for bright outdoor con-

ditions » Indoor/Outdoor, anti-Fog treated lenses designed

for moving between indoor & outdoor lighting » Ideal for: ATV/UTV, Shooting/Hunting, General Safety, Outdoors

KOL96010 I/O LensKOL96020 Gray Lens

HEATED GRIP » Protect your hands from the

cold » 4 level temperature settings » Fits any 7/8” (2,2cm) standard

handlebars on ATV or snowmo-biles

» Easy to install with pre-wired electrical connectors

» Handlebar or tank mounted electronic control unit with LED display

» To assist in installation use contact cleaner or a type of lubrication

KOL96155KOL96156 Replacement Switch

ATV TYRE CHAIN DIAMOND » 52” L x 14,5” W

(130x36cm) » Fits tyre sizes:

22x11-822x10-820x10-922x10-922x10-1022x11-922x11-1023.5x8-1124x8-11

KOL96865

» 54” L x 14,5” W(137x36cm)

» Fits tyre sizes:23x10-1024x9-1124x10-1124x11-1023x10-1225x8-12

KOL96866

» 56” L x 17” W(142x41cm)

» Fits tyre sizes:25x12-925x11-1025x12-1025x10-12

KOL96867

» 69” L x 18” W(175x46cm)

» Fits tyre sizes:27x9-1227x11-1227x10-12

KOL96868

» 59” L x 18” W(166x46cm)

» Fits tyre sizes:27x12-1228x10-1228x12-1230x10-12

KOL96869

HEATED GRIP » Keep your hands warm during those cold winter

activities - plowing, hunting, etc. » Handlebar mounted dial switch » Comfortable rubber grips » Plug & play connectors

KOL50-0360

WWW.KOLPIN.EU 63

UTV ROOFSKOL4450 - Universal Roof Medium

BIMINI TOPSKOL4476 Can-Am Commander/Maverick 2011-2016

KOL4472 Polaris RANGER XP900 2013-2016

KOL4474 Polaris RZR 570/800/900 2008-2015

KOL4485 Polaris ACE, ACE 570, ACE 900

KOL4481 Yamaha Rhino 2004-2013

KOL4471 Yamaha Viking

UNIVERSAL UTV ROOF » Overlapping, 3-piece design offers stability & easy mounting

to fit the most popular brands of utility vehicles » Easy installation requires drilling of the roof » All mounting hardware included » Provides excellent sun shade & rain cover » Roofs are 4” (10cm) narrower in front than the rear » Does not fit any crew cab models

» Adjustable side width:49” (125cm) - 55” (140cm) front53” (135cm) - 59” (150cm) rear

» Fits most machines including Rhino, Teryx, 2009-up Ranger 400/500/800

» Dimension: Front to Back 36” (91cm) outside, 32” (81cm) inside, Center 22” (56cm) wide

KOL4450

BIMINI TOPS » Constructed of durable, UV protect-

ed, 600 denier nylon » Easy installation, no tools required » Water resistant » Must be removed when trailering » Available in Black

KOL4474 KOL4476 KOL4485

RHINO BACK PANEL » Constructed of black rotational-mold-

ed, foam-filled plastic construction for durability and long life.

» Designed to integrate with Rhino Slim Line Roof.

» Custom-designed mounting hardware.

KOL1452

Disclaimer: Kolpin reserves the right to make changes in our products without notice as the need arises. At the time of printing, we believe all specifications and applications are correct but are subject to change. For the latest information on application charts or instruction manuals, please check our website at www.kolpin.eu. You can also e-mail our customer service directly at [email protected] or call us at +31 412 693 577

All of our application and fitment charts for Kolpin products can be found online at: www.kolpin.eu

Limited Warranty: Kolpin Powersports is proud of the craftsmanship and materials used in producing our high-quality ATV and UTV products. Kolpin Powersports warrants our products to be free from de-fects due to materials or workmanship for a period of ONE (1) year to the original purchaser with proof of purchase. This warranty covers products found to be defective under normal use and conditions. Kolpin Powersports will, at our discretion, either repair or replace any defective product covered by this warranty. This warranty does not include reimbursement for labor or related costs in the event of component failure.

Schuurman BVGriekenweg 165342 PZ Ossthe Netherlands

Tel.: +31 412 693 577Fax: +31 412 693 588

[email protected]©2016 www.kolpin.eu

SINCE 1943.SINCE 1943.SINCE 1943.SINCE 1943.

Date post:	02-Aug-2016
Category:	Documents
Upload:	schuurman-bv
View:	229 times
Download:	13 times

2016 - 2017 Kolpin Product Catalog

Documents