12
Offered by: www.hartandcooley.com For submittal information and other literature visit our Website. ©2010 Hart & Cooley, Inc. All rights reserved Form No. 010054 5M 7/2010 Printed in U.S.A.
Offered by:
www.hartandcooley.comFor submittal information and other literature visit our Website.
©2010 Hart & Cooley, Inc. All rights reserved Form No. 010054 5M 7/2010 Printed in U.S.A.
R E S I D E N T I A L A N D C O M M E R C I A L
Flexible Duct Systems
Edition 4
GREENGUARD® Level-4 Highly Microbial Resistant rated.
MEMBER
Order information:To order Hart & Cooley products,please contact an authorized Hart & Cooley distributor or call 800.433.6341.
When you purchase Hart & Cooley products, you also receive the full support of Hart & Cooley technical and customer service.
Technical and customer service:800.433.6341 toll-free616.656.8200 phone800.223.8461 toll-free fax616.656.6399 fax
Internet address:http: //www.hartandcooley.com
Install confidence with these other quality Hart & Cooley products available:• Registers, Grilles & Diffusers• Type B Gas Vent Systems• Special Gas Vent• Model TLC All-Fuel Chimney• Duct System Components• SMART Air and Energy Solutions
Table of Contents
1www.hartandcooley.com 800.433.6341
Tab
le of Con
tents
FLEXIBLE DUCT SYSTEMS Page
MODEL SELECTOR ..........................................................1PRODUCT INFORMATION .............................................2-3PERFORMANCE DATA .....................................................3AIR DUCTS, RESIDENTIAL SERIES ...............................4-5AIR DUCTS, COMMERCIAL SERIES ...............................5-6AIR CONNECTORS AND SLEEVES ...................................7ACCESSORIES .................................................................8AIR FRICTION CHART ...........................................................9
MODEL SELECTOR
X
JacketPackage Core InsulationR-Value
Options Diameter(inches)
Length(feet)
Jacket0 – No Jacket1 – Black
Polyethylene Jacket
2 – Metalized Polyester Jacket
3 – Heavy-Duty (4 mil.) Black Polyethylene Jacket
Package F – BoxedFB – Bagged
Core0 – No Core1 – Double-Ply
Black Polyester Core
4 – Corrugated Aluminum Core
9 – Multi-Ply Metalized/ Polyester Core
“Commercial Series”
Insulation0 – No Insulation4 – R-4.2 Insulation6 – R-6.0 Insulation8 – R-8.0 Insulation
Options CP – CompressedUCP – Uncrimped, Compressed
Disclaimer: We reserve the right to make changes in the products, product specifications, packaging and to discontinue product without notice.
F 1 1 4 8 25
How to Order: Boxed PackageBlack Polyethylene JacketDouble-Ply Black Polyester CoreR-4.2 Insulation8” Diameter25’ Length
Hart & Cooley offers flexible duct products for both residential and commercial applications, that provide the most economical solution to your air-handling needs. H&C uses Formaldehyde-Free insulation for improved indoor air quality. Available in boxes or banded bags. Custom lengths available.
POLyEThyLENE jACkET AIR DUCTS. These feature a durable, scuff-resistant black polyethylene vapor barrier that provides improved protection against damaging ultra-violet light. Installation is made easy with the reinforcing fiberglass yarn scrim, which acts as a rip-stop and helps prevent tearing. These air ducts feature an R-value of 4.2, 6.0 or 8.0 to fit any application, and also come in special configurations especially designed for manufactured homes.
METALIzED jACkET AIR DUCTS. Providing the ultimate in strength and protection, metalized polyester vapor barriers are reinforced with fiberglass scrim to provide high durability and tear resistance. The fiberglass insulation furnishes outstanding thermal protection with R-values of 4.2, 6.0 or 8.0. The metalized jacket air duct and sleeves are available with either a two-ply black polyester core (Residential Series) or high-pressure multi-ply metalized polyester laminate cores (Commercial Series) that encapsulate a high carbon steel wire helix.
ECONOMICAL AIR DUCT CONNECTORS. Designed for high pressure applications, air duct connectors utilize either a multi-ply metalized/polyester laminate encapsulating a high carbon steel wire helix or corrugated aluminum for maximum strength and durability.
UL-LISTED. Hart & Cooley flexible air ducts and air connectors have been rigorously tested by Underwriters Laboratories, Inc. in accordance with UL 181, The Standard for Safety for Factory-Made Air Ducts and Air Connectors. UL is a not-for-profit laboratory with an outstanding reputation for fire safety and performance testing. Make sure that the flexible duct you buy bears this UL mark. Our UL listing assures you that our duct cores will not promote the growth of mold.
ADC-CERTIFIED R-VALUES. All Hart & Cooley insulated flexible air ducts are certified by the Air Diffusion Council for thermal performance in accordance with the ADC Flexible Duct Performance & Installation Standards (1996). Certified R-values are essential to ensure that the product you buy meets the many regulatory energy codes. Only ADC-certified products will bear this ADC thermal certification marking.
GREENGUARD FOR ChILDREN & SChOOLS. All Hart & Cooley flexible ducts have achieved GREENGUARD for Children & Schools certification. This certification provides consumers with certified low VOC emitting products that have passed rigorous and frequent tests, which help improve indoor air quality.
GREENGUARD LEVEL 4 MICROBIAL RESISTANT. All Hart & Cooley flexible ducts are GREENGUARD Level-4 Highly Microbial Resistant rated.
ThE COLLABORATIVE FOR hIGh PERFORMANCE SChOOLS
AMERICAN SChOOLS AND hOSPITAL FACILITIES PRODUCT DIRECTORy
CODE APPROVALS. All Hart & Cooley flexible duct products meet or exceed the requirements of most federal, state, and local mechanical and energy codes. They comply with the International Mechanical Code (IMC), the Uniform Mechanical Code (UMC), NFPA 90A and 90B, HUD, and the California Bureau of Home Furnishings, to name just a few.
Product Information
2 800.433.6341 www.hartandcooley.com
Pro
duct
Inf
orm
atio
n
Flex DuctConstruction
TEN-yEAR WARRANTy.All Hart & Cooley flexible duct products are protected by the industry’s strongest warranty. Our flexible ducts are warranteed to be free of defects in material and workmanship for ten (10) years from the date of shipment. (Contact Hart & Cooley, Inc. for full details.)
RESIDENTIAL SERIES BLACk POLyESTER CORE• Rated pressure per UL 181: 12” W.C. positive,
3/4” W.C. negative (1/2” W.C. neg for 14” – 20” diameter)• Recommended operating pressure:
6” W.C. positive for 12” diameter and under 4” W.C. positive for 14” diameter and over
• Rated maximum air velocity: 5000 FPM• For residential and light commercial applications
COMMERCIAL SERIES METALIzED POLyESTER CORE • Rated pressure per UL 181: 16” W.C. positive,
1” W.C. negative (1/2” W.C. neg for 14” – 20” diameter)• Recommended operating pressure:
6” W.C. positive for 12” diameter and under 4” W.C. positive for 14” diameter and over
• Rated maximum air velocity: 6000 FPM• For residential and most commercial applications
COMMERCIAL SERIESCORRUGATED ALUMINUM CORE• Maximum rated pressure per UL 181:
12” W.C. positive for 10” diameter and under 8” W.C. positive for 12” diameter and over
3” W.C. maximum negative• Rated maximum air velocity: 5000 FPM
INSULATION R-VALUES• Certified by Underwriters Laboratories Inc. and
the Air Diffusion Council in accordance with ADC Flexible Duct Performance and Installation Standards using ASTM C-518 at installed wall thickness on flat insulation only
POLyEThyLENE jACkETS• A durable black polyethylene vapor barrier• High tensile scrim is used under the vapor barrier to
provide additional strength and tear resistance• Perm rating of 0.1 (ASTM E96 Method “A”)
METALIzED jACkETS• A metalized polyester vapor barrier is constructed
by sandwiching fiberglass scrim between layers of polyester to provide an outstanding combination of strength and tear resistance
• Perm rating of 0.04 (ASTM E96 Method “A”)
SURFACE BURNING ChARACTERISTICS (Class 1 Air Ducts)• Maximum flame spread: 25• Maximum smoke developed: 50
OPERATING TEMPERATURE RANGE• -20°F to 140°F continuous @ max. Pos. pressure• -20°F to 180°F intermittent @ 2” W.C. Pos. pressure• -20°F to 250°F intermittent @ 0.5” W.C. Pos. pressure• For corrugated aluminum cores:
-100°F to 250°F continuous @ max Pos. pressure
CODE APPROVALS, CERTIFICATIONS, AND LISTINGS• UL 181 Listed • NFPA 90A and 90B• IMC • HUD• UMC• California Bureau of Home Furnishings• Most Federal, State, and Local codes and standards
Performance Data
3www.hartandcooley.com 800.433.6341
Product Inform
ation
OUTSTANDING PERFORMANCE. All Hart & Cooley flexible duct products are performance-tested in accordance with industry standards to ensure reliability and years of service. Our core is tested (in accordance with ADC FD 72-R1) for actual installation static pressure/ temperature performance and meets the ratings specified in our catalog. Our polyester cores are also tested for microbial resistance by GEI per ASTM D6329-98. The vapor barriers are tested for permeation in accordance with ASTM test methods. Call-backs are expensive and eat away at your profits, so use flexible duct you know has been performance-tested.
INDUSTRy INVOLVEMENT. Hart & Cooley is committed to the flexible duct industry and supports it through involvement in many industry-related associations, committees, and organizations. Participation in ADC and UL’s industry advisory council for UL 181 allows Hart & Cooley to stay at the forefront of industry changes. You need a manufacturer of flexible duct who is involved in the industry to protect your interests.
MEMBER
Residential Series Flexible Air Ducts
4 800.433.6341 www.hartandcooley.com
Res
iden
tial
Ser
ies
Fle
xibl
e A
ir D
ucts
F114 / FB114 • Black polyethylene jacket• Double-ply black polyester core 12” W.C. positive, 3/4” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-4.2 • UL-listed• Boxed or bagged (FB series)• 25’ and 50’ lengths• GREENGUARD Level 4 highly microbial resistantModel Length (feet) Diameter (inches)F114 25 3 4 5 6 7 8 9 10 12 14 16 18 20FB114 25 – 4 5 6 7 8 9 10 12 14 16 18 20F114 50 – 4 5 6 7 8 9 10 12 – – – –
F116 / FB116 • Black polyethylene jacket• Double-ply black polyester core 12” W.C. positive, 3/4” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-6.0 • UL-listed• Boxed or bagged (FB series)• 25’ and 50’ lengths• GREENGUARD Level 4 highly microbial resistantModel Length (feet) Diameter (inches)F116 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB116 25 – 4 5 6 7 8 9 10 12 14 16 18 20F116 50 – – 5 6 7 8 9 10 – – – – –
F118 / FB118 • Black polyethylene jacket• Double-ply black polyester core 12” W.C. positive, 3/4” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-8.0 • UL-listed• Boxed or bagged (FB series)• 25’ and 50’ lengths• GREENGUARD Level 4 highly microbial resistant
Model Length (feet) Diameter (inches)F118 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB118 25 – 4 5 6 7 8 9 10 12 14 16 18 –F118 50 – – – 6 7 8 – – – – – – –
F314 / F318(Manufactured Home) Class 1 Air Duct• Heavy-duty 4 mil. black polyethylene jacket• Double-ply black polyester core 12” W.C. positive, 3/4” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-4.2 F314, R-8.0 F318 • UL-listed• 25’ length • Boxed• GREENGUARD Level 4 highly microbial resistant
Residential Series Flexible Air Ducts
Commercial Series Flexible Air Ducts
5www.hartandcooley.com 800.433.6341
Residential S
eries Flexible A
ir Ducts
Model Length (feet) Diameter (inches)F314 25 – 4 5 6 – 8 – 10 12 14 – – –F318 25 – – – – – – – 10 12 14 – – –
• Metalized polyester jacket reinforced with fiberglass scrim• Double-ply black polyester core 12” W.C. positive, 3/4” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-4.2 F214,FB214 / R-6.0 F216,FB216 / R-8.0 F218,FB218 • UL-listed• Boxed or bagged (FB series)• 25’ and 50’ lengths• GREENGUARD Level 4 highly microbial resistant
F214 / FB214 / F216 / FB216 / F218 / FB218
Model Length (feet) Diameter (inches)F214 25 3 4 5 6 7 8 9 10 12 14 16 18 20FB214 25 – 4 5 6 7 8 9 10 12 14 16 18 20F214 50 – 4 5 6 7 8 9 10 12 – – – –F216 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB216 25 – 4 5 6 7 8 9 10 12 14 16 18 20F216 50 – 4 5 6 7 8 9 10 – – – – –F218 25 3 4 5 6 7 8 9 10 12 14 16 18 20FB218 25 3 4 5 6 7 8 9 10 12 14 16 18 –
F144 Commercial Series• Black polyethylene jacket• Corrugated aluminum core 12” W.C. positive, 3” W.C. negative• R-4.2 • UL-listed• Available in 6’ and 71/2’ lengths
†Not UL-listed*For California Only
Model Length (feet) Diameter (inches)F144* 6 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F144* 71/2 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
• Metalized polyester jacket • Corrugated aluminum core
12” W.C. positive, 3” W.C. negative • R-6.0
• UL-listed• Available in 6’ and 71/2’ lengths
Commercial Series Flexible Air Ducts
6 800.433.6341 www.hartandcooley.com
• Metalized polyester jacket reinforced with fiberglass scrim• High pressure multi-ply metalized/polyester core, 16’’ W.C. positive, 1” W.C. negative
(1/2” W.C. neg for 14” – 20” diameter)• R-4.2 F294,FB294 / R-6.0 F296,FB296 / R-8.0 F298,FB298 • UL-listed • Boxed and bagged • 25’ length• GREENGUARD Level 4 highly microbial resistant
Com
mer
cial
Ser
ies
Fle
xibl
e A
ir D
ucts
F294 / FB294 / F296 / FB296 / F298 / FB298 Commercial Series
Model Length (feet) Diameter (inches)F294 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB294 25 – 4 5 6 7 8 9 10 12 14 16 18 20F296 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB296 25 – 4 5 6 7 8 9 10 12 14 16 18 20F298 25 – 4 5 6 7 8 9 10 12 14 16 18 20FB298 25 – 4 5 6 7 8 9 10 12 14 16 18 20
†Not UL-listed*For California Only
Model Length (feet) Diameter (inches)F246* 6 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F246* 71/2 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F194 Commercial Series • Black polyethylene jacket • UL-listed• High pressure core, 16’’ W.C. positive,
1” W.C. negative (1/2” W.C. neg for 14” – 20” diameter)• Multi-ply metalized/polyester core • R-4.2 • Boxed• 25’ length• GREENGUARD Level 4 highly microbial resistant
Model Length (feet) Diameter (inches)F194 25 – 4 5 6 7 8 9 10 12 14 16 18 20
F146 Commercial Series• Black polyethylene jacket • UL-listed• Corrugated aluminum core 12” W.C. positive, 3” W.C. negative• R-6.0 • Available in 6’ and 71/2’ lengths
†Not UL-listed*For California Only
Model Length (feet) Diameter (inches)F146* 6 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F146* 71/2 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F246 Commercial Series
F104 / F106 / F108• Black polyethylene jacket• R-4.2 F104 / R-6.0 F106 / R-8.0 F108
(R-values valid if sleeve is used on relatively sized duct)• UL-classified• 5’ length• Starter cone included in each carton
F090 Commercial Series• High pressure multi-ply metalized/polyester core,
16” W.C. positive, 1” negative. (1/2” W.C. neg for 14” – 20” diameter)
• UL and CUL listed • Bulk packaged• 25’ length • Class 1 air connector• GREENGUARD Level 4 highly microbial resistant
F010 Double-ply black polyester core, 12” W.C. positive, 3/4” negative (1/2” W.C. neg for 14” – 20” diameter)
Air Connectors and Sleeves
7www.hartandcooley.com 800.433.6341
F204 / F206 / F208 • Metalized polyester jacket • UL-classified• R-4.2 F204 / R-6.0 F206 / R-8.0 F208 (R-values valid if sleeve is used
on relatively sized duct)• 5’ length• Starter cone included in each carton
Air C
onn
ectors and S
leeves
*For California Only
F040UCP• Uncrimped,
compressed
F040• Male/Female collars,
uncompressed• UL-listed air duct
Other sizes available upon request †Not UL-listed
Model Length (feet) Diameter (inches)F090/F010 25 3 4 5 6 7 8 9 10 12 14 16 18 20
Model Length (feet) Diameter (inches)F104 5 4 5 6 7 8 9 10 12 14 16F106 5 4 4 5 7 8 9 10 12 14 16F108 5 4 5 6 7 8 9 10 12 14 16
Model Length (feet) Diameter (inches)F204 5 4 5 6 7 8 9 10 12 14 16F206 5 4 4 5 7 8 9 10 12 14 16F208 5 4 5 6 7 8 9 10 12 14 16
Model Length (feet) Diameter (inches)F246* 6 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F246* 71/2 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
Series Model Length (feet) Diameter (inches)Commercial F040* 6 – 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
Commercial F040* 71/2 – 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
Residential F040CP 8 3† 4† 5† 6† 7† 8† 9† 10† 12† 14† 16† 18† – – –Residential F040UCP 8 3† 4† 5† 6† 7† 8† 9† 10† 12† 14† 16† 18† – – –Residential F040CP 10 3† 4† 5† 6† – 8† – – – – – – – – –Residential F040UCP 20 3† 4† 5† 6† 7† 8† – – – – – – – – –
Model Length (feet) Diameter (inches)F146* 6 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
F146* 71/2 4† 5 6 7 8 9 10 12 14 16 18 20 22† 24†
AlumiFlex™ F040CP • Sturdy corrugated aluminum construction• Bulk packaged• Class 0 air connector• One end crimped, compressed
Accessories
8 800.433.6341 www.hartandcooley.com
Duct Tape• Acrylic adhesive won’t dry out• Single-ply polypropylene backing• Tears easily by hand • UL-listed and marked UL-181B-FX
SMART Flow Elbow• One size fits 4” to 16” flex duct.• Eliminates flex duct kinks and restrictions• Can be used for new and retrofit applications• UL-2043 Classified
Black Silver
Acc
esso
ries
Part No. Description Size 011371 Black 2’’ x 120 yards 011372 Silver 2’’ x 120 yards
Part No. Description Pieces per Case 630500 SMART Flow Elbow 25 636501 SMART Flow Elbow Kit 24 (2/polybag) Kit includes 2 Flow Elbows and 4 36” duct straps
IMPROVES AIRFLOW!
To order product literature, please contact Customer Service toll-free at 800.433.6341.
Air Friction Chart for Flexible Duct only
