**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers specifications. 700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com 2020 Copyright Stanisci Design 2020 all rights reserved Standard base and molding package 1 ARP- Decorative Applied molding removable panel option 39 J Series Standard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom Standard Heights 30, 36, 42, 48 or custom Removable Front Option – RF N/C option Changes box depth to 14”‐ overall depth the same. There is a 5/16” reveal in front of box *On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood. Removable Panel ‐ ARP Decorative Applied molding removable panel is available as option Standard assumptions Grain will be vertical Seam on front of cabinet between hardwood and plywood is highlighted with a V bead Depth of rear box Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the same ‐ 14” if ordered with removable front Depth of hood 22.25" Depth of hood to tips of moldings 23‐3/8" Distance moldings protrude past sides 0 Height All line drawings reflect a 30” tall hood, when ordering taller hoods, the increase will occur in chimney and box section (pyramid height will remain constant for different heights Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width Baffle liner Adjustment RA or DP2 base – increase by 1” DP1 increase by 2” Available Moldings Classic, Simple or Basic Available Options ‐RF‐ Removable front ‐ARP‐ Decorative Applied Molding Removable panel ‐Sorrento pull out spice racks Available customization Yes – recommended if using aftermarket vent Jacksonville J – Series Wall Mount Range Hood V-bead
Transcript
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Removable Front Option – RF N/C optionChanges box depth to 14”‐ overall depth the same. There is a 5/16” reveal in front of box*On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Removable Panel ‐ ARP Decorative Applied molding removable panel is available as option
Standard assumptions Grain will be verticalSeam on front of cabinet between hardwood and plywood is highlighted with a V bead
Depth of rear box Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the same ‐ 14” if ordered with removable front
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐3/8"
Distance moldings protrude past sides 0
Height All line drawings reflect a 30” tall hood, when ordering taller hoods, the increase will occur in chimney and box section (pyramid height will remain constant for different heights
Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐ ‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width
Baffle liner Adjustment RA or DP2 base – increase by 1” DP1 increase by 2”
Available Moldings Classic, Simple or Basic
Available Options ‐RF‐ Removable front‐ARP‐ Decorative Applied Molding Removable panel‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
Jacksonville
J – Series Wall Mount Range Hood
V-bead
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
RF (Removable Front Option)- JRA example- Box is 14” deep rather than standard 12”- Chimney depth is 2” verses standard 3”- There is a reveal of 5/16 on front of box
Hood without Removable Face
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
