2020...MUD SCRAPERS / POLY & STEEL 13-14 PARTS & ACCESSORIES 15-17 DEALERS 19 CONTENTS WHY CHOOSE...

2020

FULL ASSEMBLY 2

QUICK CHANGE KNIVES 3-4

LIQUID & GRANULAR FERTILISER BOOT 5

WEAR SHOE/HOLDER 6

SEEDHOG SYSTEM/SPLITTER BOOTS 7-8

EXPLODED DIAGRAM 9-10

REAR CAST ARM 11

PRESS WHEELS 12

MUD SCRAPERS / POLY & STEEL 13-14

PARTS & ACCESSORIES 15-17

DEALERS 19

CONTENTS

WHY CHOOSE GROUNDHOG INDUSTRIES PRECISION FERTILISER & SEEDING PARTS?

Groundhog Industries design and manufacture precision seeding and fertiliser parts to achieve the following goals:

1. PROVIDE MORE EFFECTIVE PRODUCT DELIVERYThis is achieved by a quick change knife, a hardened steel liquid / granular fertiliser boot, incorporating plastic tubing for liquid fertiliser delivery, eliminating the need for stainless tubing and blockages caused from bending. The thickened cast side walls allow for proper placement of granular fertiliser below the seed with soil separation. In addition we offer a range of interchangeable seed placement tools for inline seeding or banding with heavy duty carbide to maintain depth and seed split.

2. REDUCE DOWNTIME WHEN:Digging: This is achieved by using a tapered quick change, cast steel knife point requiring minimal tools to change whilst in the field and under the machine.

Fertilising: A heavy duty, hardened steel, deep banding fertiliser boot. Set and forget.

Placing seed: Using our unique “SEEDHOG SYSTEM” quickly allows only the bottom ground engaging parts to be replaced by removing a roll pin.

3. REDUCE REPLACEMENT COSTThrough innovative design, Groundhog products are better value per hectare than their competitors. By using the highest grade of tungsten carbide available as well as state of the art application processes, all Groundhog products have been designed and tested to offer maximum protection from wear at the best price.

1

PRODUCT CODEITEM NUMBERS

THROUGHOUT BROCHURE:

00

2

TRASH GUARD

KNIFE HOLDER

KNIFEseed granular fertiliser

liquid fertiliserSPLITTER BOOT

PRESS WHEELSLIQUID & GRANULAR

FERTILISER BOOT

WEAR SHOE HOLDER

FULL ASSEMBLY

200-BTSU 200BARE TYNE ASSEMBLY

DOES NOT INCLUDE GROUND ENGAGING TOOLS

FEATURES • Manufactured from cast steel for superior strength.

• Highest grade of carbide available and applied using induction welding, with proven results for wear and shock loads.

• Change points quickly by removing the split pin with a hammer, no rattle gun, no lost skin loosening bolts.

DESIGN REG (KNIVES): 335055

DESIGN REG (HOLDER): 335056

KNIFE HOLDER• Takes the brunt of the load in combination

with the load pad at the rear of the knife.

• Hugs shank neatly reducing likelihood of bolts loosening.

• Bolts are counter sunk in holder to cater for tapered knife head.

• Holder employs the same length bolts as standard points.

CLEVIS PIN• never exposed to load and therefore can’t be

damaged

KNIFE• Tapered cast steel head makes it easy to insert & remove in holder.

• Rear of knife tapered to increase wear life, 13mm at the front and 18mm at rear. Both point and holder are low profile allowing minimal soil throw, good trash handling.

CROSS SECTION• Boltheads are counter sunk in the

knife holder.

QUICK CHANGE KNIVES

3

SERVICE TIP: Always take knife point out of the holder at the end of the season and give knife holder a tap with a hammer to remove any excess dirt or clay. Although the knife point is tapered this will reduce the build up of material inside the holder and make extraction easier.

Always install knife holder using anti-seize on the thread of all bolts to make it easier to remove.

New bolts are recommended for first time installation. Worn bolt heads can turn inside the hex head housing on tightening and over time bolts can stretch from over tightening and become brittle.

When inserting split pin, only bend tips of pin for easy removal. To save time remove pins using side cutters or a hammer to shear off pin. Replace with a new pin.

GR8 NYLOCK NUTS

BOLT

TRASH GUARD KIT SET

SPLIT PIN

51-GHTRASH

11-GH006

51

11

38-12X1.34NC8B 38

16-12NC8NBU 16

10-GHSPIN 10

18-12SQSW 18

12-G8 12 X3.14NC8B 129-GH005 9

13-12NCNN 13

6 INCH: B32-GH06

7 INCH: B31-GH07

8 INCH: B30-GH08

B32

B31

B30

9 INCH: B29-GH09 B29

width at rear: 18mm

width at front: 13mm

• Optional heavy duty tungsten sizes available on request

• Hard facing on request

KNIFE

width at top: 16.5mm

width at base: 23mm

• Tapered insertion point ensures Quick Change Knives don’t get stuck - even after build up of grime over time.

• Rear of knife is wider to prolong wear life.

SIZES AVAILABLE:

Install trash guard on top of knife holder. Secure using bottom bolt hole of fertiliser bracket.

STEP 4

Install liquid tube upwards into boot. Be sure to cut a length that will reach the existing plumbing.

STEP 5

Install point upwards into holder.

STEP 6

Install top bolt through the holder and tine & fully tighten Nyloc nut. Bolt heads should not turn inside holder.

STEP 7

Insert clevis pin then split pin. Split pin to be protruding holder for easy removal with side cutters.

STEP 1

Push plastic sleeve over fert tube to first bend. No sleeve is required for older powder coated steel fertiliser tube.

STEP 2

Push boot onto fertiliser tube and install bottom bolt through holder & tine. Fully tighten Nyloc nut.

STEP 3

4

INSTALLING KNIFE, KNIFE HOLDER AND FERTILISER BOOT

liquid fertiliser

granular fertiliser

Cross section of knife and fertliser boot

LIQUID & GRANULAR FERTILISER BOOT

FEATURES • Robust cast boot provides accurate placement

of liquid and granular fertiliser below the seed. This design enables the boot to be deeper in the ground and the steel side walls of the boot provide a wear resistant shield delaying the flow of soil back into the trench.

• Using plastic tube eliminates the need for expensive stainless steel tubing, the need to weld a nut to the rear of the point and prevents bending or blockages.

• The plastic tube remains undisturbed during point changes saving time and money.

• The boots design provides a protected pathway for the plastic fertiliser tube to ground level.

• Boot is compatible with stainless and powder coated granular fertiliser tubes.

Scalloped to reduce blockage

Thicker steel wall for longer life

103-PSV3

DESIGN REG: 335057

5

SERVICE TIP: Our fertiliser boot has been designed to place product deeper in and under the seed than other fertiliser boots and therefore comes into contact with the soil. Because of this we have increased the wall thickness to increase wear life. We also offer application of tungsten grit hard facing on request.

103

LIQUID FERTILISER

TUBE

PLASTIC SLEEVE

27-GH011 27

FERTILISER BOOT

Stainless steel tube requires plastic sleeve

FERTILISER BOOT WITH HARD FACING OPTIONB27-GH011 B27

72

-WS

HC

72

WEAR SH

OE HOLDER CH

AIN

WEAR SHOE HOLDER & WEAR SHOE

FEATURES • Made from two parts - Wear Shoe Holder’

and ‘Wear Shoe’.

• Most heavy duty closing tool on the market.

• Highest quality tungsten carbide used.

• The holder provides the same bolt hole pattern as a genuine closing tool.

• The wear shoe is made from cast steel and is secured using a high tensile roll pin (roll pin does not receive any load).

• Thick casting on wear shoe and large tungsten tiles on all sizes eliminates premature wear and reduces replacement costs.

624-GH030HD 24

19-GH010 19

ROLL PIN

21-GH012 21

HOLDER

72-WSHC 72

OPTIONAL WEAR SHOE HOLDER CHAIN

38-12X1.34NC8B 38

BOLT

HEAVY DUTY WEAR SHOE ATTACHMENT TO RIB WELDMENT

16-12NC8NBU 16

18-12SQSW 18

NUT

WASHER

19-A5X250 19A

INTERNAL ROLL PIN

WEAR SHOE

Wear shoe holder and chain

SEEDHOG SYSTEM / SPLITTER BOOT

7

INVERTED SPLITTER BOOT• Leading tungsten tile at a reverse angle

to help ride over obstacles.

• Alternate profile to suit heavy duty conditions

• Inverted base / rounded middle section closes the knife trench ensuring seed separation

• Compatible with 70mm press wheel, best suited to 90mm+

77B-1V80 77B

DESIGN REG: 201714877

SPLITTER BOOT V2• Leading tungsten tile at a reverse angle

to help ride over obstacles.

• Heavy duty tungsten applied to each wing

• Specific draft angle to reduce drag & friction

• Thick underside base

• Suited to 70mm-120mm press wheel

• Extra tile of tungsten added to top of each wing

77A-SB80V2 77A

DESIGN REG: 364181

INVERTED SPLITTER BOOT FITTED TO SERIES 3 MACHINE

19-GH010 19ROLL PIN

19-A5X250 19A

INTERNAL ROLL PIN

104-PSV2PLASTIC SLEEVE 100MM SERIES 2

104103-PSV3

PLASTIC SLEEVE 60MM SERIES 3 103

72

-WS

HC

72

WEAR SH

OE HOLDER CH

AIN

underside profile:

underside profile:

38

16

18

stubble

fertiliser9” or 7”

12” or 10”

3”seed

Soil profile showing Splitter Boot from rear passing through soil (left) and resulting delivery of seed and fertiliser (right)

firm soil

8

FITTING YOUR SPLITTER BOOTS

SEED TUBE ASSEMBLY

104-PSV2

VERSION 2 MACHINES VERSION 3 & 4 MACHINES

RIB WELDMENT

ADAPTER PLATE KIT SET

103-PSV3

125-APS2

94-SSTV3

GROUNDHOG REAR CAST ARM

REAR CAST ARM 103-PSV3

80-RCA

81-SST

FEATURES • System has 2 main parts holder & splitter boot.

• Splitter Boot compatible with 12” and 10” spacing’s machines.

• Suitable for Series 2, 3 & 4 machines

• Highest quality tungsten carbide used on all groundhog splitter boots.

• Places seed into the wall of the trench in the moisture zone. Helps to combat non wetting soils and seed depth problems in the knife slot where the soil may also be dry.

• No loss of seed to the bottom of the knife furrow.

• Seed is sown into uncultivated soil and the moisture zone.

• We recommend wearshoe holder chains be used in conjunction with splitter boots.

38

18

16

EXPLODED DIAGRAM

1 1-M12X90 BOLT M12 X 90 ZP

2 2-M12WF FLAT WASHER M12 ZP HARD

3 3-GHSEAL SEAL CAP ZP HOUSING DUST SEAL

4 4-GHSB SHORT BUSH SINTERED OIL IMPGD

5 5-GHLB LONG BUSH SINTERED OIL IMPGD

6 6- M12CONE NUT M12 CONELOCK

7 7-SP120 SPRING 5.6 X 42 X120

7A 7A-HDS HD SPRING

9 9-GH005 CLEVIS PIN

10 10-GHSPIN SPLIT PIN BAG OF 50

11 11-GH006 KNIFE HOLDER

12 12-G8 12 X3.14NC8B - BOLT 1/2” -13 X 3 1/4”

13 13-12NCNN NUT 1/2” UNC NYLOC

16 16-12NC8NBU NUT 1/2 UNC PLAIN NUT

17 17- M12X150 BOLT M12 X 150

18 18-12SQSW WASHER 1/2” SPRING ZP

19 19-GH010 ROLL PIN REFER PAGE 6

20 20-GH32 PLASTIC SEED BOOT - 32 ID REFER PAGE 15

21 21-GH012 WEAR SHOE HOLDER

24 24-GH030HD WEAR SHOE 30MM HD TUNGSTEN

27 27-GH011 FERTILISER BOOT REFER PAGE 5

B31 B31-GH07 7”KNIFE BUILT REFER PAGE 3&4

38 38-12X1.34NC8B BOLT 1/2” X 1 3/4” UNC

38A 38A-BOLT BOLT FOR MUD SCRAPER 46A

42 42-PSH PIN SPRING HOLDER

43 43-STOPPER GH STOPPER

44 44-RSPRING RETAINING SPRING

46A 46A-70SCRAPERV2 MUD SCRAPER 70MM REFER PAGE 11

47 47-ARMUP SIDE ARM UPPER (LONG) REFER PAGE 15

48 48-ARMLOW SIDE ARM LOWER (LONG) REFER PAGE 15

49 49-PWARM PRESS WHEEL ARM

51 51-GHTRASH TRASH GUARD

60 60-BHOUSING BUSH HOUSING

61 61- BHN BUSH HOUSING NUT

69 69-GFT GRANULAR FERT TUBE

70 70-FTB BRACKET FOR SEED OR FERT TUBE

80 80- RCA REAR CAST ARM - REFER PAGE 11

81 81-SST STAINLESS SEED TUBE RCA

87 87- PWBOLT PRESS WHEEL BOLT

88 88-PWLN LOCK NUT

103 103-PSV3 PLASTIC SLEEVE 60MM SERIES 3 REF. PAGE 10

105 105-SHK SHANK

106 106-HR70 HYDRAULIC RAM 70MM STROKE

107 107-M20CONE NUT - M20 - ZP - CONELOCK

108 108-BASP BUSH ASSY - SHANK PIVOT

109 109-CPL CHEEK PLATE LEFT

110 110-M24NLOCK NUT - M24 - ZP - NYLOCK

111 111-M20X60 BOLT M20 X 60 C10.9 ZP

112 112-WFM24 WASHER FLAT - M24 - ZP

113 113-WFM20 WASHER FLAT - M20 - ZP

114 114-PBA PIVOT BRACKET ASSY

115 115-PJCB PIN - JUMP CYL BASE

116 116-PSP PIN SHANK PIVOT

117 117-GN GREASE NIPPLE 1/4” BSW

118 118-VCR VALVE CUSHION RETURN

119 119-P25X64 PIN 25 X 64 SHANK PIVOT

120 120-CPAR CHEEK PLATE ASSY RIGHT

121 121-CPPB CLAMP PLATE - PIVOT BRACKET

122 122-PJC25X75 PIN 25X75 JUMP CYLINDER

128 128-CE CIRCLIP EXTERNAL 25 X 1.2

129 129-BSN BUSH HYDRAULIC RAM

136 136-BPW BUILT PRESS WHEEL REFER PAGE 12

THERE IS NO RELATIONSHIP BETWEEN GROUNDHOG INDUSTRIES AND AUSPLOW PTY LTD. AUSPLOW PTY LTD HAS NOT APPROVED THE USE OF GROUNDHOG INDUSTRIES PARTS ON ITS MACHINERY.

14 14-GHPWSEAL PRESS WHEEL DUST SEAL 37X7X24

15 15-PWBJ PRESS WHEEL BEARING

73 73-PWS PRESSWHEEL SPACER

84 84-PWBC1 PRESS WHEEL BEARING COVER

96 96-PWH PRESS WHEEL HUB

97 97-RR RETAINING RING

98 98-IPWS INTERNAL PRESS WHEEL SPACER

99 99-BM8X60 BOLT M8X60MM

100 100-WM8F WASHER M8FLAT

101 101-NM8CL NUT M8 CONELOCK

102 102-PWT120 PRESS WHEEL TYRE 300 X 120MM


144 144-VPW V PRESS WHEEL TYRE 320 X 90MM

REAR CAST ARM

11

FEATURES • Uses two bolt holes to attach the closing tool instead of one.

The top hole is elongated. This is an improvement on one hole and prevents closing tools becoming lose and being lost in the field.

• Bushes are contained in a bush housing to allow bushes to be removed in the field instead of in the workshop.

• Multiple styles of mud scrapers can be used.

• Reduces the cost to upgrade older machines.

1 1-M12X90 BOLT M12 X 90 ZP

2 2-M12WF FLAT WASHER M12 ZP HARD

3 3-GHSEAL SEAL CAP ZP HOUSING DUST SEAL

4 4-GHSB SHORT BUSH SINTERED OIL IMPGD

5 5-GHLB LONG BUSH SINTERED OIL IMPGD

6 6- M12CONE NUT M12 CONELOCK

16 16-12NC8NBU NUT 1/2 UNC PLAIN NUT

18 18-12SQSW WASHER 1/2” SPRING ZP

38 38-12X1.34NC8B BOLT 1/2” X 1 3/4” UNC

38A 38A-BOLT BOLT FOR MUD SCRAPER 46A

46 46-70SCRAPERV3 MUD SCRAPER 70MM S3 TINE

46A 46A-70SCRAPERV2 MUD SCRAPER 70MM S2 TINE (46A FITS TO RCA AND SEED TUBE ASSEMBLY)

46B 46B-90SCRAPERV3 MUD SCRAPER 90MM S3 TINE

47 47-ARMUP SIDE ARM UPPER (LONG)

48 48-ARMLOW SIDE ARM LOWER (LONG)

60 60-BHOUSING BUSH HOUSING

61 61- BHN BUSH HOUSING NUT

68 68-SAV2 SCRAPER ARM SERIES 2 TINE (68 FITS TO RCA AND SEED TUBE ASSEMBLY)

70 70-FTB BRACKET FOR SEED OR FERT TUBE

81 81-SST STAINLESS SEED TUBE RCA

89 89-SAV3 SCRAPER ARM SERIES 3 TINE (89 FITS TO RCA AND RIB WELDMENT)

133 133-MSBOLT BOLT M10 X 25

134 134-WFM10 WASHER FLAT M10 TO SUIT MUDSCRAPER

135 135-NNM10 NYLOC NUT M10

123 - SPK

SHANK PIVOT KIT* contains: Bush housing x1 Bush housing nut x1 Seal Cap x2 Short Bush x2 Long Bush x1 Bolt M12 x 90 ZP x1 Flat Washer M12 ZP x2 Nut M12 Conelock x1

144

14 14-GHPWSEAL PRESS WHEEL DUST SEAL 37X7X24

15 15-PWBJ PRESS WHEEL BEARING

73 73-PWS PRESSWHEEL SPACER

84 84-PWBC1 PRESS WHEEL BEARING COVER

96 96-PWH PRESS WHEEL HUB

97 97-RR RETAINING RING

98 98-IPWS INTERNAL PRESS WHEEL SPACER

99 99-BM8X60 BOLT M8X60MM

100 100-WM8F WASHER M8FLAT

101 101-NM8CL NUT M8 CONELOCK



144 144-VPW V PRESS WHEEL TYRE 320 X 90MM

12

FEATURES • Multiple profiles available to suit

your soil and crops.

• Heavy duty rubber tyres that can withstand harsh environments.

PRESS WHEELS

PRESS WHEEL TYRE 300 X 70MM

PRESS WHEEL TYRE 300 X 120MM

V PRESS WHEEL TYRE 320 X 90MM

PRESS WHEEL PROFILES

95-PWT170 95

102-PWT120 102

144-VPW 144

x6x6

x6 x6

BUILT PRESS WHEEL 300 X 70MM

136-PWB 136

BUILT PRESS WHEEL 300 X 120MM

136A-BPW120 136A

BUILT V PRESS WHEEL 320 X 90MM

136B-BPW90V 136B

MUD SCRAPERS / POLY & STEEL

x2x2x2x2

137-SAV4

140A-SP120

137

140A

18

38A

16

18

2

16

38A

TO SUITSEED TUBE ASSEMBLY

SCRAPER ARM V4 KIT SET

PLASTIC SCRAPER FOR 120MM WHEEL

141-SP90V 141

PLASTIC SCRAPER FOR 90MM V WHEEL

TO SUITRIB WELDMENT

TO SUIT REAR CAST ARM

x2x2x2x2

18

16

2

38A

x2x2x2x2

18

16

2

38A

38A

18

16

142-SP7090 142

PLASTIC SCRAPER FOR 70 & 90MM WHEELS

SCRAPER ARM V5 KIT SET

SCRAPER ARM V6 KIT SET138-SAV5

139-SAV6

138

139

143 x2

142A-SP120 142A

STEEL SCRAPER FOR 120MM WHEEL

141A-SP90V 141A

STEEL SCRAPER FOR 90MM V WHEEL

142A-SP7090 142A

STEEL SCRAPER FOR 70 & 90MM WHEELS

x2x2

6

13

x1x1x1

x1x1x1

13

14

SEED TUBE ASSEMBLY KIT V4:INCLUDES:

1 X SCRAPER ARM V4 137-SAV4

3 X BOLT FOR MUD SCRAPER 38A-BOLT

3 X WASHER 1/2” SPRING ZP 18-12SQSW

3 X NUT 1/2 UNC PLAIN NUT 16-12NC8NBU

2 X FLAT WASHER M12 ZP HARD 2-M12WF

CHOOSE 1 OPTION: SCRAPER TYPE

• SCRAPER FOR 120MM WIDE TYRE STEEL = 142A-SP120 / PLASTIC = 140A-SP120

• SCRAPER FOR 100MM WIDE V TYRE STEEL = 141A-SP90V / PLASTIC = 141-SP100V

• SCRAPER FOR 70MM & 90MM WIDE TYRE STEEL = 142A-SP7090 / PLASTIC = 142-SP7090

RIB WELDMENT KIT V5:INCLUDES:


2 X M12 X 60 ZP BOLTS 143-M12X60ZP

1 X NUT M12 CONE LOCK 6-M12CONE


2 X NUT 1/2 UNC PLAIN NUT 16-12NC8NBU







REAR CAST ARM KIT V6:INCLUDES:




3 X NUT 1/2 UNC PLAIN NU 6-12NC8NBU






FEATURES OF POLY MUD SCRAPERS• ultra-high weight polyethylene (UHMWPE)

• very high abrasion resistance

• high toughness

• crack resistant

• shock proof

• double sided scrapers for longer life

• can be manufactured to fit any profile

FEATURES OF STEEL MUD SCRAPERS• very high abrasion resistance bisalley steel

• high toughness

• crack resistant

• shock proof

• can be manufactured to fit any profile

• hard faced

MUD SCRAPER 90MM S3 TINE46B-90SCRAPERV3 46B

00

SEAL CAP ZP HOUSING DUST SEAL3-GHSEAL 3

SPLIT PIN BAG OF 5010-GHSPIN 10

SHORT BUSH SINTERED OIL IMPG.4-GHSB 4

4

LONG BUSH SINTERED OIL IMPG. HD SPRING5-GHLB 7A-HDS5 7A

SPRING 5.6 X 42 X1207-SP120 7

CLEVIS PIN9-GH005 9

PRESS WHEEL DUST SEAL 37X7X2414-GHPWSEAL 14

SIDE ARM LOWER (SHORT)SIDE ARM LOWER (LONG)

MUD SCRAPER 70MM S3 TINE48A-ARMLOWA48-ARMLOW

46-70SCRAPERV3

48A48

MUD SCRAPER 70MM S2 TINE46A-70SCRAPERV2 46A

46

SPRING45-SSPRING 45

46B

SIDE ARM UPPER (LONG) 47-ARMUP 47

SIDE ARM UPPER (SHORT)47A-ARMUPA 47A

PRODUCT CODE ITEM NUMBERS ITEMS NOT TO SCALE

PARTS & ACCESSORIES

15

5

PRESS WHEEL BEARING15-PWBJ 15

15

PRESS WHEEL BEARING COVER 84-PWBC1 84

84

PLASTIC SEED BOOT - 42 ID HOSE CLAMP 32-5020A-GH42 29A-GH5120A

20A

29A

PLASTIC SEED BOOT - 32 ID20-GH32 20

20

HOSE CLAMP 19-4429-GH44 29

OPEN END GEAR SPANNER37-GHK3093

PIN SPRING HOLDER42-PSH 4237

GH STOPPER43-STOPPER 43

RETAINING SPRING44-RSPRING 44

SCRAPER ARM V2 TINE68-SAV2 68

68

SCRAPER ARM V3 TINE89-SAV3 89

89

46A

46

POLY URETHANE STOPPER43A-PUSTOPPER 43A

43

43A

BOLT M12 X 90 Z1-M12X90 1

6MM LIQUID FERTILISER TUBE 85-LFT1

PRESS WHEEL ARM49-PWARM 49

INTERNAL PRESSWHEEL SPACER98-IPWS 98

PRESS WHEEL TYRE 300 X 120MM102-PWT120

85PLASTIC SLEEVE VERSION 3103-PSV3 103

103

PLASTIC SLEEVE VERSION 2104-PSV2 104

ROLL PIN19-GH010 19

19 19A

INTERNAL ROLL PIN19A-5X25 19A

SEED TUBE SPRING130-STS 130

104

PRESSWHEEL TYRE 300 X 70MM95-PWT70 95

AIR SEEDER HOSE 127MM X 1MTR



74-ASH 127 X 1

75-ASH 63 X 20

76-ASH 32 X 20

FERT TUBE BRACKET

STAINLESS SEED TUBE S3

STAINLESS SEED TUBE RCA

70-FTB

94-SSTV3

81-SST

70

70

94

81

94 81

BUSH HOUSING NUT61-BHN 61

BUSH HOUSING 60-BHOUSING 60

GRANULAR FERT TUBE69-GFT 72-WSHC69 72

102PRESS WHEEL TYRE 320 X 100MM144-VPW V 144

SEAL KIT HYDRAULIC RAM 70MM STROKE106A-SK70R 106A

69

WEAR SHOE HOLDER CHAIN

PRESSWHEEL SPACER73-PWS 73

PRESS WHEEL HUB96-PWH 96

TRASH GUARD INCLUDES HARDWARE51-GHTRASH 51

16

74

75

76

122-PJC25X75 122

122

BUSH ASSY - SHANK PIVOT

PIN 25 X 64 SHANK PIVOT

PIN - JUMP CYL BASE

PIN 25X75 JUMP CYLINDER

PIN SHANK PIVOT

108-BASP

119-P25X64

115-PJCB

116-PSB

108

108

119

119

115

115

116

116

HYDRAULIC RAM106-HR70 106

17

PARTS & ACCESSORIESSEEDING BAR COMPONENTSDESRCIPTION ITEM # PRODUCT CODE PART DESCRIPTION

80-8 COMPLETE STUD AXLE

200 200-8 STUD AXLE

80-8 STUB ASSLY 8/275 233 80SQ

80-8 HUB COMPONENTS

201 201-SSTUB 80 SERIES STUB 385 80SQ S1045

202 202-SEAL "SEAL 125 X 90 X 12 70 & 80 SERIES"

203 203-80SB "80 SERIES BEARING 30214 SKF (70X125X26.25)"


205 205-PSZ PIN SPLIT M6 X 60 ZINC

206 206-M8X30 "M8 X 30 SHCS T/S 70 & 80 SERIES"

207 207-M8WZ M8 WASHER LOCK RIB ZINC

208 208-NSM39 "NUT SLOTTED M39 X 2 T/S 75 & 80 SERIES"

209 209-WRS "WEAR RING 70 & 80 SERIES T/S SEAL 125 X 90 X 12"

210 210-SR "SEAL RING 80 SERIES 70.5 X 90.5 X 95 X 16.5"

211 211-WSM18 WHEEL STUD M18 X 1.5 X 65

212 212-HUBD 80-8 HUB M/C & DRILLED 8/275

213 213-DCAP "DUST CAP 70/80 SERIES BOLT ON M/C (3 SCREW)"

214 214-WNM18 "WHEEL NUT M18 X 1.5 SPHERICAL R16"

WHEEL 215 215-WHEELGB SEEDING BAR WHEEL 22.5 -11.75 GLOSS BLACK

TYRE 216 216-MTL16 SEEDING BAR TYRES - 385/65-22.5

FLOTATION TYRE 217 217-MTL18 SEEDING BAR FLOTATION TYRES 400/60-22

WHEELS / TYRES / AXLE PARTS

PIVOT KIT BOLT SET131-PKBS 131

118-VCRVALVE CUSHION RETURN

118OPAQUE AIR SEEDER HOSE 32OD, 38ID X 30 MTR78-OASH30 78

OPAQUE AIR SEEDER HOSE 32 OD, 38ID X 100MTR79-OASH100 79

HYD HOSE 3/8 X 1.55M – ¾145-HAE1550 145

HYD HOSE 3/8 X 0.9M – ¾146-HAE900 146

HYD HOSE 3/8 X 1.4M – ¾147-HAE1400 147

ELBOW148 - ELBOW 148

TEE149 - TEE 149

COULTER DISK - 18” FLAT 6 HOLE126-CD18 126

BUSH HYDRAULIC RAM129-BSN 129

SHANK PIVOT KIT123-SPK 123

18

100-10 HUB COMPONENTSITEM # PRODUCT CODE PART DESCRIPTION

301 301-SEAL 100-10 HUB COMPONENTS- SEAL 150X110X12

302 302-DCBO DUST CAP 90/100 SERIES BOLT ON NEW MODEL 131MMPCD(4SCREW)


304 304-NSM45 NUT SLOTTED M45 X 2.0

305 305-SHCST "M6 X 20 SHCS T/S 90 & 92 SERIES"

306 306-M6WL M6 WASHER LOCK RIB ZINC

307 307-WFG "1 3/4 WASHER FLAT GOLD GR8 T/S 3"" TOW BALL"

308 308-WRS WEAR RING 100&110&H240 SERIES

309 309-SR100 SEAL RING 100 SERIES

310 310-WNZ WHEEL NUT M22 X 1.5 C/W (ZINC)

311 311-WSTD WHEEL STUD M22 X 1.5 X 85

312 312-HUB 100-10 HUB M/C DRILLED 10/335

313 313-SB70100 70/100 SERIES BEARING 32213 SKF

314 314-SB100240 100/240 SERIES BEARING 32217 SKF

110-10 HUB COMPONENTS315 315-M8WLR M8 WASHER LOCK RIB ZINC

316 316-SHCS M8 X 1.25 X 20 SHCS

317 317-DCBO DUST CAP 110 SERIES BOLT ON

318 318-PSM8Z PIN SPLIT M8 X 80 ZINC

319 319-NSM45 NUT SLOTTED M45 X 2.0

320 320-WSH100 WASHER SH100 & 110-10 HUB

321 321-WRMS WEAR RING 100&110&H240 SERIES

322 322-SEAL SEAL 150 X 110 X 12

323 323-SR110 SEAL RING 110 SERIES

324 324-WNM22 WHEEL NUT M22 X 1.5 C/W (ZINC)


326 326-HUBMCD "110-10 HUB M/C & DRILLED 10/335"

327 327-110SBA "110 SERIES BEARING 33215 SKF(75X130X41)"

328 328-1100SBB "110 SERIES BEARING 33217 SKF(85X150X49)"

SEEDING BAR COMPONENTSDESRCIPTION ITEM # PRODUCT CODE PART DESCRIPTION

80-8 COMPLETE STUD AXLE

200 200-8 STUD AXLE

80-8 STUB ASSLY 8/275 233 80SQ

80-8 HUB COMPONENTS

201 201-SSTUB 80 SERIES STUB 385 80SQ S1045

202 202-SEAL "SEAL 125 X 90 X 12 70 & 80 SERIES"




206 206-M8X30 "M8 X 30 SHCS T/S 70 & 80 SERIES"

207 207-M8WZ M8 WASHER LOCK RIB ZINC

208 208-NSM39 "NUT SLOTTED M39 X 2 T/S 75 & 80 SERIES"

209 209-WRS "WEAR RING 70 & 80 SERIES T/S SEAL 125 X 90 X 12"

210 210-SR "SEAL RING 80 SERIES 70.5 X 90.5 X 95 X 16.5"


212 212-HUBD 80-8 HUB M/C & DRILLED 8/275

213 213-DCAP "DUST CAP 70/80 SERIES BOLT ON M/C (3 SCREW)"

214 214-WNM18 "WHEEL NUT M18 X 1.5 SPHERICAL R16"

WHEEL 215 215-WHEELGB SEEDING BAR WHEEL 22.5 -11.75 GLOSS BLACK

TYRE 216 216-MTL16 SEEDING BAR TYRES - 385/65-22.5

FLOTATION TYRE 217 217-MTL18 SEEDING BAR FLOTATION TYRES 400/60-22

AIRSEEDER BIN HUB COMPONENTSWHEELS / TYRES / AXLE PARTS150-12 HUB COMPONENTS

ITEM # PRODUCT CODE PART DESCRIPTION

329 329-150SHB 150 SERIES HUB M/C & DRILLED

330 330-M24NP M24 X 2 NUT PLAIN GR8

331 331-WHSG "M24 WASHER HIGH STRENGTH FRICTION GRIP"


333 333-WNM27 WHEEL NUT M27 X 2.0 C/W

334 334-SR150 SEAL RING 150 SERIES 135 X 170.5 X 180 X20.5

335 335-WR150 "WEAR RING 150 SERIEST/S SEAL 215 X 170 X 15"

336 336-M12SHCS M12 X 1.75 X 70 SHCS

337 337-150SW 150 SERIES WASHER

338 338-M8WLRZ M8 WASHER LOCK RIB ZINC

339 339-M8X25S "M8 X 25 SHCST/S 60/110/150/H240 SERIES"

340 340-NSM70 "NUT SLOTTED M70 X 2 ANDYST/S 150 SERIES"

341 341-PSM8Z PIN SPLIT M8 X 100 ZINC

342 342-DC150 "DUST CAP 150 SERIES BOLT ONM/C (6 SCREW)"

343 343-SEALS "SEAL 215 X 170 X 15 150 SERIES"

344 344-SB24 "150 SERIES BEARING 30224 SKF(120X215X43.5)"

345 345-SB21 "150 SERIES BEARING 32021 SKF(105X160X35)"

ALBANYMcIntosh & SonAlbanyPhone: (08) 9847 4255

KULINMcIntosh & SonKulinPhone: (08) 9880 2556

ESPERANCEMcIntosh & SonEsperancePhone: (08) 9071 1155

MERREDINMcIntosh & SonMerredinPhone: (08) 9041 1099

GERALDTONMcIntosh & Son GeraldtonPhone: (08) 9960 5500

MOORAMcIntosh & SonMoora Phone: (08) 9651 1488

KATANNING McIntosh & SonKatanningPhone: (08) 9821 7000

WONGAN HILLSMcIntosh & SonWongan HillsPhone: (08) 9671 1300

WUDINNACurtis’sWudinnaPhone: (08) 86 802 161

YARRAWONGAMcBurnie GroupYarrawongaPhone: (03) 5744 1111

TUMBY BAYCurtis’sTumby BayPhone: (08) 8688 2119

BEULAHBeulah MachineryCowra Phone: (02) 6341 3270

WA DEALERS

SA DEALERS

VIC DEALERS

NSW DEALERS

WARRANTY INFORMATIONAs the selection, set-up and use of tillage and seeding equipment is affected by variables beyond our control, neither the Manufacturer nor any persons employed on its behalf including dealers or agents are liable for any loss or damage, whether consequential or otherwise, resulting from the use of its products. Warranty may / may not apply where any product is used for other than its intended and recommended purpose, or is subjected to pressures, loads or conditions beyond that for which it is designed. Should a product not perform its intended or recommended function, contact Groundhog Industries.

FOR SALES CONTACT:

TEL: 08 9337 7919

PO BOX 291 SOUTH FREMANTLE 61621C ADAMS STREET, O’CONNOR 6163

EMAIL: [email protected]

WWW.GROUNDHOG.COM.AU

CUMMINSCurtis’sCumminsPhone: (08) 8676 2117

BORDERTOWNO’ConnorsBordertownPhone: (08) 8752 1311

COROWAO’ConnorsCorowa Phone: (02) 6033 1666

CONDOBOLINO’ConnorsCondobolin Phone: (02) 6895 2622

WEST WYALONGO’ConnorsWest WyalongPhone: (02) 6972 2288

FORBESO’ConnorsForbesPhone: (02) 6852 1200

GRENFELLO’ConnorsGrenfellPhone: (02) 6343 1422

BIRCHIPO’ConnorsBirchip Phone: (03) 5492 2311

HORSHAMO’ConnorsHorsham Phone: (03) 5382 1727

WARRACKNABEALO’ConnorsWarracknabealPhone: (03) 5398 1877

SHEPPARTONO’ConnorsSheppartonPhone: (03) 5821 4555

Date post:	16-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

2020...MUD SCRAPERS / POLY & STEEL 13-14 PARTS & ACCESSORIES 15-17 DEALERS 19 CONTENTS WHY CHOOSE...

Documents