Business flexibility ="§==Systems===

PegaPlan.

PegaProducts PegaPlan

Tune Up your Radio Network.

Join Leading Mobile

Operators. Use Their

Tool.

With PegaPlan you can ideally engineer

the air interface of 2G, 2.5G and 3G cel-

lular networks. This great planning and

optimizing tool supports the whole life

cycle, from initial design, deployment,

densification and steady improvement

of your mobile network. In doing so, you

profit from the know-how and best prac-

tice planning processes of many of the

leading mobile operators worldwide.

An international change request board of

reputable users drafts the requirements

for PegaPlan. That way, it is ensured that

the experience and knowledge as well

as best practice of world leading mobile

operators are continually integrated into

the system and become standard. For

example, the harmonization of deploy-

ment processes and the One Company

approach of the T-Mobile Group has

been realized with the help of experts

and the planning product of their choice,

PegaPlan.

Very Practical and Well Thought Out.In many different countries and under

various conditions, PegaPlan has shown

its qualities. Just take coverage and inter-

ference calculations as a case in point:

Here, PegaPlan automatically chooses

the most suitable, variable resolution

and combination of propagation models.

Let’s say you want to predict how your

network will operate in a dense urban

business center. PegaPlan will help you

by allowing you to use a high resolution

with a sophisticated propagation model.

PegaPlan

Should you plan 3G networks with Monte Carlo

simulation techniques, PegaPlan has more

practical features for you: Like most other plan-

ning tools it comes with a Monte Carlo simulator.

Unlike most similar solutions, PegaPlan also

offers you a fast analytical model with a runtime

proportional to the number of base stations and

independent of the number of active cell phones

and the amount of traffic.

In short, PegaPlan supports the planning and

optimization of your network with some tens of

thousands of cells. On top of that, you may be-

nefit from PegaPlan’s fast estimation mode. With

this, you can evaluate the coverage and capacity

of a mobile network very quickly.

Up to Date.PegaPlan keeps pace with the rapid develop-

ment in the mobile communications industry.

As so it is not only providing support for estab-

lished technologies like GSM, GPRS/EDGE,

and WCDMA, but already extends its range into

HSDPA, WiMAX, and Flarion’s Flash-OFDM.

It also covers current PMR technologies like

TETRA. Support for UMTS TDD mode, HSUPA,

and TD-SCDMA is already on the roadmap.

Packed with Features for Your Success.PegaPlan comes with a host of features, the

most important ones are described below. There

is and will be a lot more within PegaPlan, so feel

free to contact us for more information or should

you have any special inquiries.

GIS Features.PegaPlan delivers variable and freely definable

resolution for all relevant spatial data down to

a few meters. Geodata typically used comprise

land usage, elevation, maps, roads, railway lines,

social, economical and geographical statistics.

PegaPlan also supports many important coor-

dinate systems such as WGS-84, Krassowskij,

ED-50, Airy and others. An interface to serveral

MapInfo and ESRI file formats rounds off this

category.

Propagation Modeling.PegaPlan comes complete with a propaga-

tion model library that includes all relevant

and published macro and micro cell models.

This includes a 3-D micro cell model and the

recommended macro cell model that has been

exclusively developed for PegaPlan. All models

can be tuned in each country for our customers

based on measurements. As an additional asset,

PegaPlan automatically chooses the best suited

combinations of models for coverage and inter-

ference analysis.

Measurement Module.Of course, PegaPlan enables you to import data

from measurement equipment from different

vendors. It also makes spatial comparisons with

prediction data and statistical analysis possible.

Simulation and Analysis.We do not know of a more versatile tool available

in this category. Or have you seen one that enab-

les you to carry out the following functions?

coverage, interference and handover planning

of GSM, GPRS/EDGE and UMTS/HSDPA

true multi-layer planning for dual band net-

works

joint planning of 2G and 3G networks

analysis of 3G pilot and service areas

calculation of load and blocking taking user

configurable Radio Resource Management

into account

statistical analysis and reporting of key perfor-

mance indicators

indoor and outdoor coverage analysis

PegaPlan lets you calculate all items with very

fast analytical models. Additionally, PegaPlan of-

fers a Monte Carlo simulation engine for UMTS.

Neighborhood Planning.PegaPlan features automatic neighborhood

planning for 2G, 2.5G and 3G network topolo-

gies. The neighborhood editor included in the

package lets you manually tune handover plan-

ning. In addition you can edit the handover rela-

tions in the graphical display as well.

Frequency and Code Planning plus Coordination.A patented algorithm is your key to perform

BCCH, TCH and HTCH channel and scrambling

code assignments automatically. Synthesized

and Baseband Hopping is supported. Frequency

demand analysis works with a clique analysis

and shows you the set of mutually interfering

cells needing most frequencies or codes in the

network. That way, planners get valuable hints

for optimization. Advanced algorithms are also

used for automatically assigning all kind of

codes to the cells: HSN, MAIO, NCC, BCC, TSC

and RACC. International issues are covered:

PegaPlan evaluates if cells near national borders

are subject to cross-country frequency or code

coordination according to the “Vienna agree-

ment” (HCM model implemented).

As mentioned, PegaPlan comes fully equipped

with many other functions such as statistic cal-

culations and evaluations of key performance

indicators (KPIs), it offers you report generation

and result plotting with comfortable layout edi-

tors.

Hardware Requirements. Sun Workstation or PC (Linux), MS Windows

from Spring 2007

19” monitor or larger screen

Main memory at least 512 MB

HDD of minimum 20 GB

CD-ROM / DVD Writer for software updates

and backup

Printer for ASCII outputs

Color printer or plotter for hardcopies of plan-

ning results

Alternatively, a client-server architecture with

PCs and workstation(s) file server can be inte-

grated into an existing office communication

network.

Publisher:

T-Systems Enterprise Service GmbH

Mainzer Landstrasse 50

60325 Frankfurt am Main

Germany

Responsible for content:

Systems Integration & IL TMU

Contact:

T-Systems Enterprise Service GmbH

Telco Solutions / Network IT Planning Solutions

Rabinstr. 8

53111 Bonn

Germany

e-mail: pegaplan.support@t-systems.com

Internet: www.t-systems.com, www.pegaproducts.com

01/2

007;

err

ors

and

omis

sion

s ex

cept

ed; p

aper

ble

ache

d w

ithou

t use

of c

hlor

ine