1
EQUIPMENT AT THE TRIPOD EQUIPMENT IN THE RV OTA and hard drive connections not shown. Satellite + MoCA 650 - 3000 MHz MoCA 650 - 875 MHz Satellite Signal 950 - 2150 MHz HD TELEVISION HDMI IN OPTICAL OUT ANTENNA IN HD TELEVISION HDMI IN OPTICAL OUT ANTENNA IN SINGLE RG6 FROM SAT DISH: PROS • Only one coax needs to run from a portable sat dish back to the RV. CONS • The single coax must be RG6 rated at 3 GHz. Typical RG6 coax used today is 2 GHz. • Ordinary AB switches can NOT be used because of the high frequency 3 GHz coax required. • Because the coax used in an RV is probably not rated at 3 GHz, new cabling would need to be run (or run through an RV window). When switching back and forth between the Travler and the portable dish, the RG6 coax from each Solo Node must be connected to the TAP by hand. RG6 SINGLE COAX (rated at 3 GHz) MMTTVV-FMYYXXXXX SOLO NODE 185834 TO SERVER TO LNBFs TO CLIENT TO SERVER 10.5-28V Grounding wire size: Copper wire-8-14 AWG Copper coated steel wire-17 AWG EchoStar Technologies L.L.C. TO CLIENT SOLO NODE 185834 75 ohm Terminator RG6 SINGLE COAX (rated at 3 GHz) US: 5G6MM00BID050 FCC ID: DKNTK421 LICENSED UNDER U.S. PATENT NO. 6,233,389 125 SOLO NODE 185834 75 ohm Terminator DISH 1000, 1000.2, or 1000.4 HOPPER 1.46A JOEY MoCA MoCA MoCA SATELLITE TO HOST TO CLIENT TAP 190506 TO NODE EchoStar Technologies L.L.C. DC PASS TAP 190506 DISH OTA MODULE-USB BATWING OVER-THE-AIR TV ANTENNA USB 2.0 HARD DRIVE (self powered) MMTTVV-FMYYXXXXX SOLO NODE 185834 TO SERVER TO LNBFs TO CLIENT TO SERVER 10.5-28V Grounding wire size: Copper wire-8-14 AWG Copper coated steel wire-17 AWG EchoStar Technologies L.L.C. TO CLIENT © 2013, 2014, 2015 Tom Hughes If you did not download this document from http://rvseniormoments.com/tech-docs/dish-tv-for-rvs/, this document may be out of date. TWO TVs (HD + HD) – HOPPER + JOEY (4/16/2015) SINGLE RG6 FROM SAT DISH
