PARTS
ø19.05
ø29
Product ModelDescription Fit to Code No.
Chuck Nut
2129
2102
K-265
CHN-A
Chuck Nut for Collet Chuck (CHK)
Chuck Nut for Collet Chuck (CHA)
ø11.
811.5
ø15.
9
12.5
ø15.
2
12.5
Product ModelInside Diameter : ød Fit to
RA-151E
EMA-3020K· EMS-3060K· EMR-3008KNR-2551· NR-3060S· RAS-151ERAX-71E· RAX-271E
214610772147214821302149
KCH-02 (5.0)
KCH-02 (6.0)
KCH-02 (8.0)
KCH-03 (5.0)
KCH-03 (6.0)
KCH-03 (8.0)
ø5.0
ø6.0
ø8.0
ø5.0
ø6.0
ø8.0
Code No.
Special Metal Saw AxisDimensions of Metal Sawød (I.D) x ø30 (O.D.) mmRun-out Accuracy: Within 0.02 mm
EMA-3020K· EMS-3060K· EMR-3008KNR-2551· NR-3060S· NRR-2651RAS-151E· RAX-71E· RAX-271E
2131AGM-03Grindstone AxisRun-out Accuracy : Within 0.02 mmFor Grindstone with ø5.0 mm I.D.
50
d
d
54.5
48
ø5
EMS-3060K· NR-3060SNR-403E· NR-453E
EM20-S6000· EM25-S6000EMS-3060A· NR-3080S
EM30-S6000· EMA-3020K· EMS-3060KEMR-3008K· NR-151E· NR-2551NR-3060S· NR-403E· NR-453ERAS-151E· RAX-271E· RAX-71E
2158K-265AChuck Nut for NRAF-5080
2138EGF-19Grindstone FlangeApplicable Grindstone Dimensions ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm
Product Code No.ModelDescription Fit to
Grease for Reducer (2.5mL)
Grease for Reducer (10mL)
Grease for Reducer (100mL)
-
-
-
1547
1550
1549
ARG-011E· ARG-021E · EMA-3020KRAX-271E· RAX-71E
NRAF-5080
Special Axis · Grindstone Axis
Grease
Special Metal Saw AxisDimensions of Metal Sawød (I.D) x ø30 (O.D.) mmRun-out Accuracy: Within 0.02 mm
BRUSHLESS MOTOR & SPINDLE
FOR CNC LATHES, SPECIAL PURPOSE MACHINES
SeriesSeries
'10.
10.0
3.A
PR
-K24
3E V
er.2
*Please mention "Code Number" upon your order.
: For right hand (cw) rotation only.*
P. 2P. 1
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES”
Ultra Precision Brushless MotorOne piece type, Separate Type is available.
Excellent durability and high rigidity are obtained using a high-speedbrushless motor.
Designed for high speed milling and drilling, etc on CNC lathes andspecial purpose machines.
One Piece Type SpindleShorten total spindle length suitable for the compact sized NC orCNC Lathe, and special purpose machines.
Hardened and precision ground for high rigidity & excellentdurability.
External housing is one-piece with the spindle & the motor formachine attachments.
Separate Type SpindleFree to connect the spindle to the motor for applications
Easy to exchange for repairs
Spindle Motor
Spindle Motor
Torque Characteristics GraphOutput : Output means that the working capacity by the brushlessmotor. Output depends on Motor Speed and Torque.
Torque : Maximum Torque means the torque by the combination of thecontrol unit & the brushless motor.Stop the motor when loading themotor over the maximum torque.
Continuous Duty Area : RatingTorque means the torque by thebrushless motor continuously. Thetorque area from the rating power tothe maximum power means that thetorque by the brushless motorintermittently.
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
Motor Cord3 type motor cord is available for applications.
Quick Disconnect Cord <J Type>Features : Can be connected far from the rear end of the motorLength : 3m, 4m, 6m, 8m
Straight Connector Cord <S Type>Features : Connect straight at the rear end of the motorLength : 4m, 6m, 8m
Angle Connector Cord <A Type>Features : Connect 90˚ at the rear end of the motorLength : 4m, 6m, 8m
J Type
S Type
A Type
Angle Spindle(One Piece / Separate Type)Capable of working on cornersdifficult to work with straight typeand milling on side face.Select Head Size of 4 SeparateTypes or 2 One Piece Types.
* Inserted picture is separate type.
Straight Spindle(One Piece Type)
O.D. ø30, ø25, ø20mm is available.(Separate Type)
O.D. ø30, ø25mm Spindles are available.
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:36 AM ページ1
Grindstone Flange EGF-19
Axis for Metal Saw KCH-03
Grindstone Axis AGM-03
Axis for Metal Saw KCH-02
Axis for Metal Saw KCH-03
Grindstone Axis AGM-03
Lever Type Spindle NRR-2651
Lever Type Spindle NRR-3060
SpindleNR-2551
Automatic Tool Replacement SpindleNR50-5100 ATC
Automatic Tool Replacement SpindleNR40-5100 ATC
SpindleNR-453E / NR-403E
90º Angle SpindleRAS-151E(1/2.67)
SpindleNR-3060S
(Cord with Quick Disconnect)Brushless MotorEM25N-5000-J4
Angle Type Motor Cord is available.
Motor Cord <A type>EMCD-3000A- 4M / 6M / 8M
Motor Cord <S type>EMCD-3000- 4M / 6M / 8M
Motor Cord <J type>
EMCD-3000J-3M / 4M / 6M / 8M
(Cord with Quick Disconnect)
May be connected between the motor and the spindle as required for increased torque.
May be connected between the motor and the spindle as required for increased torque.
E3000 Control Unit
E3000 Selector UnitSingle motor can only be operated at the same time. No simultaneous operation.
�
100V~240V
100V~240V
Air Line Kit AL-0201
�Cooling-air is supplied.
Compressor5,000~50,000min-1
7,490min-1
7,490min-1
50,000min-1
(NR-453E)
40,000min-1
(NR-403E)
13,330min-1
50,000min-1
50,000min-1
60,000min-1
50,000min-1
50,000min-1
Speed ReducerARG-2504N (1/4 Reduction)
Speed ReducerARG-2516N (1/16 Reduction)
1,870min-1 (�
1)7,500min-1 (�
1)
20,000min-1
(RAX-271E)
5,000min-1
(RAX-71E)
60,000min-1
1,000~60,000min-1
Brushless MotorEM-3060JEM-3060J-2M
Chuck Nut K-265
ø0.5~ø6.0mmChuck CHK Group
ø0.8~ø3.0mmChuck CH8 Group
ø2.0~ø6.0mmChuck CHR Group
ø0.8~ø3.0mmChuck CHS Group
ø2.0~ø4.0mmChuck CHB Group
ø0.5~ø6.0mmChuck CHK Group
ø2.0~ø4.0mmChuck CHB Group
Open and Close Lever
Open and Close Lever
90º Angle SpindleRAX-271E (1/1.5)RAX-71E (1/6)
90º Angle SpindleRA-271E (1/1.5)
90º Angle SpindleRA-151E (1/2.67)
1,870min-1 (�
1)7,500min-1 (�
1)
Speed ReducerARG-011E (1/4 Reduction)
Speed ReducerARG-021E (1/16 Reduction)
5,000~60,000min-1
Brushless MotorEM-3060
1,000~32,000min-1
Brushless MotorEM-3030JEM-3030J-2M
Chuck Nut K-265
Separate Type ø30, ø25mmELECTRICSYSTEM
P. 4P. 3
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SYSTEM CHART
Brushless Motor SpindleEMS-3060K
Brushless Motor SpindleEMS-3060A
Brushless Motor SpindleEMR-3008K
90º Angle Brushless Motor SpindleEMA-3020K
90º Angle Brushless Motor SpindleEMA-3020S
Brushless Motor SpindleEM30-S6000
Brushless Motor SpindleEM25-S6000
Brushless Motor SpindleEM20-S6000
Grindstone Flange EGF-19
Grindstone Flange EGF-19
Axis for Metal Saw KCH-03
Axis for Metal Saw KCH-03
Grindstone Axis AGM-03
Grindstone Axis AGM-03
Axis for Metal Saw KCH-03
Grindstone Axis AGM-03
Axis for Metal Saw KCH-03
Grindstone Axis AGM-03
Chuck Nut K-265
Chuck Nut K-265
Chuck Nut K-265
Chuck Nut K-265
ø0.5~ø4.0mmChuck CHA Group
ø0.5~ø6.0mmChuck CHK Group
ø0.5~ø6.0mmChuck CHK Group
ø0.5~ø6.0mmChuck CHK Group
ø1.0~ø3.0mmChuck CHSS Group
ø0.5~ø6.0mmChuck CHK Group
Chuck Nut CHN-A
ø0.5~ø4.0mmChuck CHA Group
Chuck Nut CHN-A
Motor Cord <J type>
EMCD-3000J-3M / 4M / 6M / 8M
(Cord with Quick Disconnect)
Air Line Kit AL-0201
�Cooling-air is supplied.
Compressor
E3000 Selector Unit
E3000 Control Unit
Single motor can only be operated at the same time. No simultaneous operation.
�
100V~240V
100V~240V
Angle Type Motor Cord is available.
Motor Cord <S type>EMCD-3000- 4M / 6M / 8M
Motor Cord <A type>EMCD-3000A- 4M / 6M / 8M
60,000min-1
60,000min-1
8,000min-1
60,000min-1
60,000min-1
60,000min-1
21,300min-1
21,300min-1
One Piece Type ø30, ø25, ø20mmELECTRICSYSTEM
*Please refer to the concerned product introduction page about the details.Do not exceed the maximum motor speed recommendation for the spindles.Excess speed will dramatically reduce bearing life.* 1 : Maximum rotating speed at the cutting tool.*
Refer to the end of catalog
about the detailsRefer to the end of catalog
about the details
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:36 AM ページ3
ELECTRICSYSTEM 5,000~60,000min-1 350W 2.8kg
Motor Speed Max. Power
AC100~240V
Power Source
AC 1.8A
Power Consumption Weight
E3000 Control Unit
P. 6P. 5
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” CONTROL UNIT
*Please mention "Code Number" upon your order.
Dimensions : W88 x D138 x H238 mm
236
138144
271
251
6591
45
10
4.5
M4x0.7Stepped Bracket
168
246
13888
188M4x0.7Stepped Bracket
65 4586.2
4.5
10
Bottom Mounting Back Mounting
Plug Type Main Usable Area Product
For JapanFor 100V (A type)
For U.S.A.and
Canada
For 120V(B type)
Power Source Plug
Without PlugFor 200V(C type)
For EuropeFor 230V(D type)
Mounting Bracket
Air Flow Volume : 30L/min (0.25-0.3MPa)
Air Line KitAL-0201
Capable ofHorizontal Setting
AC100-240V forinternational operation
Operation Panel ExtensionCord 4m is available
Cooled-air is supplied
Refer to P.33
Operation Panel Extension Cord
OPTION
Parameter SettingCapable of setting the maximum motor speed for theallowable motor speed by the Parameter Setting
Refer to P.33OPTION
• • • • • •LOAD
External Input / OutputControl Signal Operation•External Input
Motor Rotating / StoppedError ReleasedRotating DirectionMotor Speed Setting and etc.
•External MonitorMotor CurrentErrorWarningRotating pulse and etc.
•Parameter SettingMaximum motor speed setting,Fix the motor speed etc.
Refer to Technical Data (General Catalogue) in detail
•: Continuous load area
•: Intermittent load area
•: Overload
< Standard Equipment · Accessories >
• Power Cord : 2m • Air Hose with filter • Reducer
• Air Plug (Provided) • Connector Cap (Provided)
• Bracket • Power Cord Grip • Screw • Rubber Pad
• Fuse (T6.3AL) 250V : 2pcs.
E3000Control Unit
CodeNo. 8421Plug
Type For 100V (A type)
CodeNo. 9775Plug
Type For 120V (B type)
CodeNo. 8422Plug
Type For 200V (C type)
CodeNo. 9776Plug
Type For 230V (D type)
Product
*The Control Unit {CAT.No. : 8423 (100V), 9778 (115V), 8424 (200V), 9779 (230V)} are an Optional Safety Version with an "Emergency Stop Input" and "Safety Relay".
*AC100-240V for international operation. Please check the power source plug type (p.6) and order accordingly.
E3000 Control Unit60,000min-1 Specification
350W (ø30mm Motor)Max. Power
Max.
LED Load Meter
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:37 AM ページ5
P. 8P. 7
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” MOTOR SPINDLE
*Please mention "Code Number" upon your order.
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
60,000min-1 Within 1 µm ø0.5~ø6.0mm(CHK Group)
565g350Wø30mm
Motor Speed Spindle Runout Collet Chuck WeightMax. PowerO.D.Brushless Motor Spindle
EMS-3060KELECTRICSYSTEM
ø30
0 -0.0
1
ø15.
9
164.2
16.9 136.3 11
45
46.4 Max. Tool Mounting Depth
20Recommended Clamping Area
Quick Disconnect Cord
0.3m
•Torque Characteristics
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHA-3.0) • Chuck Nut (CHN-A) • Spanner (8 x 5), (9 x 11) : 1pc. each
< Optional >
Collet Chuck (CHA Group) : ø0.5~ø4.0mm See Page 34 for details
Motor Cord : Length 3m (1778), 4m (1768), 6m (1767), 8m (1766)
•Torque Characteristics
Straight SpindleBRUSHLESS MOTOR SPINDLE (One Piece Type)
149.4
14.7 123.7 11
4514
ø30
0 -0.0
1
ø11.
8
31.4 Max. Tool Mounting Depth
Recommended Clamping AreaQuick Disconnect Cord
0.3m
60,000min-1 350WWithin 1 µm ø0.5~ø4.0mm(CHA Group)
495gø30mm
Motor Speed Max. PowerSpindle Runout Collet Chuck WeightO.D.Brushless Motor Spindle
EMS-3060AELECTRICSYSTEM
6 7 85432100
35035
30030
25025
20020
15015
10010
505
Torque
Output
Continuous Duty Area
Out
put
(W)
Torq
ue (c
N.m
)
Speed (x103 min-1)
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265) • Spanner (12 x 14) : 2pcs. • Grease for Reducer (10mL)
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Motor Cord : Length 3m (1778), 4m (1768), 6m (1767), 8m (1766)
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
•Torque Characteristics
183.5
11155.616.9
46.4 Max. Tool Mounting Depth
20
77.1
ø30
0 -0.0
1
ø15.
9
45Recommended Clamping Area
Grease Point
Quick Disconnect Cord
0.3m
Maximum rotating speed at the cutting tool
8,000 min-1
To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours.Grease injection prevents friction of the internal gears as well as heat generation. Addinggrease also prevents the degradation of the existing grease in the reducer. Please maintaina reducer grease maintenance program.
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265) • Spanner (12 x 14) : 2pcs.
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Motor Cord : Length 3m (1778), 4m (1768), 6m (1767), 8m (1766)
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
Grindstone Flange (EGF-19) : ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm
EMR-3008KCodeNo. 1757 Model
8,000min-1* 350WWithin 1 µm 650gø30mm
Max. Rotating Speed at The Cutting Tool
32,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle Max. PowerSpindle Runout WeightO.D.
14
Reduction RatioBrushless Motor Spindle
EMR-3008KELECTRICSYSTEM
When using an angle type spindle or a speed reducer, do not exceed “ the maximum motor speed ” or “ the maximum rotating speed at the reducer ” for the spindle and the reducer.
EMS-3060ACodeNo. 1755 Model
For light duty grinding
EMS-3060KCodeNo. 1756 Model
Shorten Total Spindle LengthSuitable for the compact sized NC orCNC Lathe.
Hardened and precisionground for high rigidity &excellent durability
External housing is one-piece withthe spindle & the motor formachine attachments
ø30mm60,000min-1
350WMax. Power
Max.
Outside Diameter
Spindle Runout :Within 1 µm
*Do not exceed the allowable motor speed for the spindle.
Motor Cord <J Type>
EMCD-3000J-4M
*Cord length 3M, 6M, 8M is available.
Refer to P.22OPTION
Brushless Motor SpindleEMS-3060K
32,000 min-1
Maximum allowable motor speed for the spindle1
4
Reduction Ratio
Refer to P.34
Collet Chuck CHK-3.0
OPTION
*Other collet sizes are available.
Refer to P.5
E3000 Control Unit
OPTION
Refer to P.22
OptionMotor Cord <J Type>3M, 4M, 6M, 8M
Refer to P.22
OptionMotor Cord <J Type>3M, 4M, 6M, 8M
Refer to P.22
OptionMotor Cord <J Type>3M, 4M, 6M, 8M
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:37 AM ページ7
P. 10P. 9
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” MOTOR SPINDLE
*Please mention "Code Number" upon your order.
20 36
17.4 149.5
ø15.
9
ø30
0 -0.0
1
50 Max. Tool Mounting Depth
Recommended Clamping Area
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265) • Spanner (12 x 14) : 2pcs.
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Motor Cord : Length 4m (1748), 6m (1749), 8m (1750)
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
Grindstone Flange (EGF-19) : ø19.05 (I.D.) x ø40 (O.D.) x 7 (W) mm6050403020100
0
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
•Torque Characteristics
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
•Torque Characteristics
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
•Torque Characteristics
Straight SpindleBRUSHLESS MOTOR SPINDLE (One Piece Type)
60,000min-1 Within 1 µm ø0.5~ø6.0mm(CHK Group)
575g350Wø30mm
Motor Speed Spindle Runout Collet Chuck WeightMax. PowerO.D.Brushless Motor Spindle
EM30-S6000ELECTRICSYSTEM
60,000min-1 Within 1 µm ø0.5~ø4.0mm(CHA Group)
375g250Wø25mm
Motor Speed Spindle Runout Collet Chuck WeightMax. PowerO.D.Brushless Motor Spindle
EM25-S6000ELECTRICSYSTEM
60,000min-1 Within 1 µm ø0.5~ø4.0mm(CHA Group)
230g250Wø20mm
Motor Speed Spindle Runout Collet Chuck WeightMax. PowerO.D.Brushless Motor Spindle
EM20-S6000ELECTRICSYSTEM
22 30
14.7 139.5
ø11.
8
ø25
0 -0.0
1
41 Max. Tool Mounting Depth
Recommended Clamping Area
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHA-3.0) • Chuck Nut (CHN-A) • Spanner (8 x 5), (9 x 11) : 1pc. each
< Optional >
Collet Chuck (CHA Group) : ø0.5~ø4.0mm See Page 34 for details
Motor Cord : Length 4m (1748), 6m (1749), 8m (1750)
41 Max. Tool Mounting Depth
18 34
14.7 133
ø11.
8
ø20
0 -0.0
1
Recommended Clamping Area
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHA-3.0) • Chuck Nut (CHN-A) • Spanner (8 x 5), (9 x 11) : 1pc. each
< Optional >
Collet Chuck (CHA Group) : ø0.5~ø4.0mm See Page 34 for details
Motor Cord : Length 4m (1748), 6m (1749), 8m (1750)
Brushless Motor SpindleEM30-S6000
Collet Chuck :Max. ø6.0mm
ø30, ø25, ø20mm60,000min-1
350W (ø30mm)Max. Power
Max.
Outside Diameter
Spindle Runout :Within 1 µm
*Do not exceed the allowable motor speed for the spindle.
EM30-S6000CodeNo. 1747 Model
EM25-S6000CodeNo. 1746 Model
EM20-S6000CodeNo. 1745 Model
Motor Cord <A Type>EMCD-3000A-4M
17.7 15Motor Cord <S Type>EMCD-3000-4M
34.9 13*Cord length 6M, 8M is available. *Cord length 6M, 8M is available.
Refer to P.21OPTION Refer to P.21OPTION
Refer to P.34
Collet Chuck CHK-3.0
OPTION
*Other collet sizes are available.
Motor Cord <S Type> <A Type>EMCD-3000-4M
*Cord length 6M, 8M is available.
Refer to P.21OPTION
Refer to P.5
E3000 Control Unit
OPTION
Refer to P.21
OptionMotor Cord <S Type> <A Type>4M, 6M, 8M
Refer to P.21
OptionMotor Cord <S Type> <A Type>4M, 6M, 8M
Refer to P.21
OptionMotor Cord <S Type> <A Type>4M, 6M, 8M
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:37 AM ページ9
P. 12P. 11
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” MOTOR SPINDLE
*Please mention "Code Number" upon your order.
167.4
Max.
Tool M
ounti
ng De
pth
45
11
17.4
27.8
31
141.4
76.2
58.8
ø30
50
ø15.9
ø30
0 -0.0
1
Recommended Clamping Area
0.3m
Grease Point
Quick Disconnect Cord
Maximum rotating speed at the cutting tool
21,300 min-1
157.6
31
1113 133.6
1515
36.5
6.5
30
45
ø7.9Recommended Clamping Area
ø30
0 -0.0
1
0.3mMax. T
ool Mo
unting
Depth
Quick Disconnect Cord
27
Maximum rotating speed at the cutting tool
21,300 min-1
Angle SpindleBRUSHLESS MOTOR SPINDLE (One Piece Type)
14
12
10
8
6
4
2
20 4 6 8 10 12 14 16 18 20 21.3
350
300
250
200
150
100
50
0
Continuous Duty Area
Torque Output
Out
put
(W)
Torq
ue (c
N. m
)
Speed (x103 min-1)
•Torque Characteristics
14
12
10
8
6
4
2
20 4 6 8 10 12 14 16 18 20 21.3
350
300
250
200
150
100
50
0
Continuous Duty Area
Torque Output
Out
put
(W)
Torq
ue (c
N. m
)
Speed (x103 min-1)
•Torque Characteristics
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHSS-3.0) • Spanner (7 x 5.1), (8 x 6.1) : 1pc. each
< Optional >
Collet Chuck (CHSS Group) : ø1.0~ø3.0mm See Page 34 for details
Motor Cord : Length 3m (1778), 4m (1768), 6m (1767), 8m (1766)
*Do not exceed the allowable motor speed for the spindle.
Model EMA-3020K EMA-3020S
ø30 x 76.2mm 27 x 36.5mm
ø0.5~ø6.0mm ø1.0~ø3.0mm
21,300min-1
Angle Head Size O.D.
Using Tools
Max. Rotating Speed at The Cutting Tool
Angle Spindle Select Sheet
90˚Angle Brushless Motor SpindleEMA-3020K
Collet Chuck :Max. ø6.0mm
ø30mm21,300min- 1 ( )
280WMax. Power
Max.
Outside Diameter
Shorten Total Spindle LengthSuitable for the compact sized NC orCNC Lathe.
Maximum rotating speed atthe cutting tool for EMA-3020K
Hardened andprecision groundfor high rigidity &excellent durability
External housing is one-piece withthe spindle & the motor formachine attachments
When using an angle type spindle or a speed reducer, do not exceed “ the maximum motor speed ” or “ the maximum rotating speed at the reducer ” for the spindle and the reducer.
21,300min-1 280WWithin 2 µm 760gø30mm
Max. Rotating Speed at The Cutting Tool
32,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle Max. PowerSpindle Runout WeightO.D.
11.5
Reduction Ratio
EMA-3020K
90˚AngleBrushless Motor Spindle
ELECTRICSYSTEM
EMA-3020KCodeNo. 1759 Model
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265) • Spanner (12 x 14) : 2pcs. • Grease for Reducer (10mL)
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Motor Cord : Length 3m (1778), 4m (1768), 6m (1767), 8m (1766)
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
21,300min-1 280WWithin 3 µm 605gø30mm
Max. Rotating Speed at The Cutting Tool
32,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle Max. PowerSpindle Runout WeightO.D.
11.5
Reduction Ratio
ELECTRICSYSTEM
EMA-3020SCodeNo. 1758 Model
32,000 min-1
Maximum allowable motor speed for the spindle
11.5
Reduction Ratio
32,000 min-1
Maximum allowable motor speed for the spindle
11.5
Reduction Ratio
To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours.Grease injection prevents friction of the internal gears as well as heat generation. Addinggrease also prevents the degradation of the existing grease in the reducer. Please maintaina reducer grease maintenance program.
Motor Cord <J Type>EMCD-3000J-4M
*Cord length 3M, 6M, 8M is available.
Refer to P.22OPTION
Refer to P.34
Collet Chuck CHK-3.0
OPTION
*Other collet sizes are available.
Refer to P.5
E3000 Control Unit
OPTION
90˚AngleBrushless Motor Spindle
EMA-3020S
Refer to P.22
OptionMotor Cord <J Type>3M, 4M, 6M, 8M
Refer to P.22
OptionMotor Cord <J Type>3M, 4M, 6M, 8M
0p00-p12_E3000_K243Ev2_1010 10.10.25 1:37 AM ページ11
P. 16P. 15
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SPINDLE
*Please mention "Code Number" upon your order.
76.4
193.497 96.4
RAX-271E EM-3030J
20,000min-1 Within 2 µm 580gø30mm
Max. Rotating Speed at The Cutting Tool
30,000min-1
(Allowable Rotating Speed)ø0.5~ø6.0mm
(CHK Group)
Max. Allowable Motor Speed for The Spindle Collet Chuck Spindle Runout WeightO.D.
5,000min-1 Within 2 µm 580gø30mm 30,000min-1
(Allowable Rotating Speed)ø0.5~ø6.0mm
(CHK Group)
11.5
Reduction Ratio
16
90˚Angle Spindle
RAX-271E RAX-71E
ELECTRICSYSTEM
59
17.4
Angle SpindleBRUSHLESS MOTOR & SPINDLE (Separate Type)
*Do not exceed the allowable motor speed for the spindle.
*Set the allowable motor speed for the spindle by the Parameter Setting with the E3000 Control Unit .
90˚Angle Spindle
ELECTRICSYSTEM RAS-151E
90˚Angle Spindle
ELECTRICSYSTEM
7,490min-1 Within 2 µm 325gø30mm
Max. Rotating Speed at The Cutting Tool
20,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle
ø0.5~ø6.0mm(CHK Group)
Collet Chuck Spindle Runout WeightO.D.
12.67
Reduction Ratio
13,330min-1 240gø30mm
Max. Rotating Speed at The Cutting Tool
20,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle
ø0.8~ø3.0mm(CHS Group)
Collet Chuck WeightO.D.
11.5
Reduction Ratio
105.
9
160.263.8
RAS-151E
96.4
EM-3030J
48.3
18386.6
RA-151E
96.4
EM-3030J
35.2
170.173.7
RA-271E
96.4
EM-3030J
RA-271E
90˚Angle Spindle
ELECTRICSYSTEM 7,490min-1 385gø30mm
Max. Rotating Speed at The Cutting Tool
20,000min-1
(Allowable Rotating Speed)
Max. Allowable Motor Speed for The Spindle
ø0.8~ø3.0mm(CH8 Group)
Collet Chuck WeightO.D.
12.67
Reduction Ratio
RA-151E
To extend the life expectancy of the Speed Reducer, inject grease every 70 to100 hours. Grease injection prevents friction of the internal gears as well asheat generation. Adding grease also prevents the degradation of the existinggrease in the reducer. Please maintain a reducer grease maintenance program.
Model RAX-271E RAX-71E RAS-151E RA-151E RA-271E
ø0.5~ø6.0mm ø0.8~ø3.0mm
20,000min-1 5,000min-1 7,490min-1 7,490min-1 13,330min-1
Using Tools
Max. Rotating Speed at The Cutting Tool
Angle Spindle Select Sheet
Collet Chuck : Max. ø6.0mm (Using CHK Group)
90˚Angle SpindleRAX-271E
Brushless MotorEM-3030J Refer to P.23
Collet ChuckCHK-3.0
OPTION *Other collet sizes are available.
ø30mm20,000min-1
280W (Using EM-3030J)Max. Power
Max.
Outside Diameter
Refer to P.34
Motor Cord <J Type>EMCD-3000J-4M
*Cord length 3M, 6M, 8M is available.
Refer to P.23OPTION
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0)
• Chuck Nut (K-265) • Spanner (12 x 14) : 2pcs., (22 x 27) : 1pc.
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
CodeNo. 1559 Model RAS-151E
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CH8-3.0) • Spanner (7 x 5.5), (8 x 5), (22 x 27) : 1pc. each
< Optional >
Collet Chuck (CH8 Group) : ø0.8~ø3.0mm See Page 34 for details
Metal Saw Axis (KCH-02) : For ø6.0 (I.D.) x within ø30mm (O.D.)
CodeNo. 1505 Model RA-151E
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHS-3.0) • Spanner (7 x 5.1), (8 x 5), (22 x 27) : 1pc. each
< Optional >
Collet Chuck (CHS Group) : ø0.8~ø3.0mm See Page 34 for details
CodeNo. 1506 Model RA-271E
When using an angle type spindle or a speed reducer, do not exceed “ the maximum motor speed ” or “ the maximum rotating speed at the reducer ” for the spindle and the reducer.
7516.9 14
52.3
50 Max. Tool Mounting Depth
20.2 28Recommended Clamping Area
20,000 min-1
7,490 min-1
ø15.
9
ø23
0 -0.0
1
ø30 0-0.01
Maximum allowable motor speed for the spindle
Maximum rotating speed at the cutting tool
12.67
Reduction Ratio
86.6
40.1
ø22.8
8.2
20
ø9
32 M
ax. T
ool M
ount
ing
Dep
th
20,000 min-1
7,490 min-1
ø30
0 -0.0
1
37.5
Maximum allowable motor speed for the spindle
Maximum rotating speed at the cutting tool
Recommended Clamping Area
12.67
Reduction Ratio
28.5
6.7
15
ø7.9
31 M
ax. T
ool M
ount
ing
Dep
th
ø30
0 -0.0
1
73.7
ø17.4 32.745
Recommended Clamping Area
13,330 min-1
20,000 min-1
Maximum allowable motor speed for the spindle
Maximum rotating speed at the cutting tool
11.5
Reduction Ratio
ø30
ø15.9
5917
.4
31
82
49.9
Max
. Too
l Mou
ntin
g D
epth
20
9
ø30
0 -0.0
1
35Recommended Clamping Area
Grease Point
30,000 min-1
Maximum allowable motor speed for the spindle
(RAX-271E)20,000 min-1
(RAX-71E)5,000 min-1
Maximum rotating speed at the cutting tool
1/1.51/6
(RAX-271E)(RAX-71E)
Reduction Ratio
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265)
• Spanner (12 x 14) : 2pcs., (22 x 27) : 1pc. • Grease for Reducer (10mL)
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
CodeNo. 1579 Model RAX-71E
CodeNo. 1578 Model RAX-271E
Refer to P.5
E3000 Control Unit
OPTION
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ15
P. 18P. 17
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SPINDLE
*Please mention "Code Number" upon your order.
Automatic Tool Replacement SpindleBRUSHLESS MOTOR & SPINDLE (Separate Type)
NR50-5100 ATC
202.4106 96.4
EM-3060J
NR40-5100 ATC
186.490 96.4
EM-3060J
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
• Torque Characteristics of EM-3060J
Automatic Tool Replacementwith Air ON/OFF
Collet Chuck :ø3.175mm Refer to P.34
Collet Chuck CHR-3.175
OPTION
*Other collet sizes are available.
New dust protection mechanism design exhaustsair sideways. Side exhaust discharge keeps chipsfrom being disbursed away from the machining area(NR50-5100 ATC)
ø50, ø40mm50,000min-1
350WMax. Power
Max.
Outside Diameter
Automatic Tool Replacement SpindleNR50-5100 ATC
*Do not exceed the allowable motor speed for the spindle.
Brushless MotorEM-3060J Refer to P.22
Spindle Runout :Within 1 µm(NR50-5100 ATC)
Exhaust air direction
15 55Recommended Clamping Area
10
82
6.1 90
ø40
0 -0.0
1
ø10.
8
ø24
< Standard Equipment · Accessories >
• Collet Chuck ø3.175mm (CHB-3.175)
• Spanner (6.1 x 8), (9 x 11) : 1pc. each • Bar Wrench (K-236) : 1pc.
• Air Hose with filter (K-251) : ø6mm x 2m
< Optional >
Collet Chuck (CHB Group) : ø2.0, ø3.0, ø3.175, ø4.0mm
See Page 34 for details
CodeNo. 1582 Model NR40-5100 ATC
50,000min-1
(Motor Speed)
ø3.175mm(CHB Group)
Within 2 µm 740gø40mm
Allowable Motor Speed
0.55~0.6MPa
Air for Collet Opening Collet ChuckSpindle Runout WeightO.D.
NR40-5100 ATC
< Standard Equipment · Accessories >
• Collet Chuck ø3.175mm (CHR-3.175)
• Spanner (9 x 11), (12 x 14) : 1pc. each • Bar Wrench (K-236) : 1pc.
• Air Hose with filter (K-251) : ø6mm x 2m
< Optional >
Collet Chuck (CHR Group) : ø2.0, ø3.0, ø3.175, ø4.0, ø6.0, ø6.35mm
See Page 34 for details
CodeNo. 1580 Model NR50-5100 ATC
50,000min-1
(Motor Speed)
ø3.175mm(CHR Group)
Within 1 µm 1,370gø50mm
Allowable Motor Speed
0.55~0.6MPa
Air for Collet Opening Collet ChuckSpindle Runout WeightO.D.Automatic ToolReplacement Spindle
Automatic ToolReplacement Spindle
NR50-5100 ATC
Exhaust air direction
ø50
0 -0.0
1
ø15.
8ø
36
12.5
989.6 8
70
67 Max. Tool Mounting Depth
17*for ø3.175mm tool shank
Recommended Clamping Area
ELECTRICSYSTEM
ELECTRICSYSTEM
Refer to P.5
E3000 Control Unit
OPTION
Motor Cord <J Type>EMCD-3000J-4M
*Cord length 3M, 6M, 8M is available.
Refer to P.22OPTION
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ17
P. 20P. 19
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SPINDLE
*Please mention "Code Number" upon your order.
60,000min-1
(Motor Speed)
ø3.175mm(CHB Group)
Within 1 µm 350gø26.8mmRecommendedClamping Area
Allowable Motor Speed Collet ChuckSpindle Runout WeightO.D.Lever Type Spindle
NRR-3060ELECTRICSYSTEM
Lever Type SpindleBRUSHLESS MOTOR & SPINDLE (Separate Type)
*Do not exceed the allowable motor speed for the spindle.
LOCK OPENLOCK OPEN KLOCK
OPOPEN
K
OP
NRR-3060
175.879.4 96.4
EM-3060J
Tool changing withthe Lever open &close
Lever Type SpindleNRR-3060
Collet Chuck : ø3.175mm
New dust protection mechanism design exhausts airsideways. Side exhaust discharge keeps chips frombeing disbursed away from the machining area.The bottom of the spindle is equipped with aninternal thread. This enables tool length pre-setting.*Please make the stopper by your own to adjust "Tool Mounting Depth"
ø26.8mm ( )
60,000min-1
350WMax. Power
Max.
Outside Diameter
Brushless MotorEM-3060J Refer to P.22
Spindle Runout :Within 1 µm
RecommendedClamping Area
< Standard Equipment · Accessories >
• Collet Chuck ø3.175mm (CHB-3.175)
• Spanner (6.1 x 8) : 2 pcs., (22 x 27) : 1pc.
< Optional >
Collet Chuck (CHB Group) : ø2.0, ø3.0, ø3.175, ø4.0mm
See Page 34 for details
CodeNo. 1836 Model NRR-3060
Exhaust air direction
25.4
27.1
Max
. Too
l Mou
ntin
g De
pth
5.5
79.4
ø26.8 0-0.01
ø29.8
ø30
ø 6.9
Open and Close Lever
Reco
mm
ende
d Cl
ampi
ng A
rea
33.6
30
M2 x 0.4 mm
ø 4.0
5 mm
ø A
L 3 mm
•New dust protection mechanism design exhausts airsideways. Side exhaust discharge keeps chips frombeing disbursed away from the machining area.
•The bottom of the spindle is equipped with an internalthread (M2 x 0.4mm / 3mm long). This enables toollength pre-setting.
Features:
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
• Torque Characteristics of EM-3060J
Refer to P.5
E3000 Control Unit
OPTION
Motor Cord <J Type>EMCD-3000J-4M
*Cord length 3M, 6M, 8M is available.
Refer to P.22OPTION
Refer to P.34
Collet Chuck CHB-3.175
OPTION
*Other collet sizes are available.
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ19
1744 EMCD-3000A-4M 4m
1743 EMCD-3000A-6M 6m
1742 EMCD-3000A-8M 8m
EM-3060EM30-S6000EM25-S6000EM20-S6000
• Air Hose• Connector Cap
(Provided)
17.7 15
Product Model Length Fit toStd · AccessoriesCode No.
P. 22P. 21
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” MOTOR, MOTOR CORD
*Please mention "Code Number" upon your order.
34.9 13
17.7 15ø30 0 -0
.02
93.5
Brushless Motor
EM-3060 5,000~60,000min-1350W 325gø30mmELECTRICSYSTEM
Motor SpeedMax. Power WeightO.D.
• Torque Characteristics of EM-3060
32.7180.1
93.5
EM-3060
195.393.5 47.9 53.9
NR-3060S NR-3060S
53.9
EM-3060
1748 EMCD-3000-4M 4m
1749 EMCD-3000-6M 6m
1750 EMCD-3000-8M 8m
EM-3060EM30-S6000EM25-S6000EM20-S6000
• Air Hose• Connector Cap
(Provided) 34.9 13
Motor Cord <S Type> Straight
Motor Cord is sold separately. Please select a cord from the list below.
Motor Cord EMCD-3000J-3M / 4M / 6M / 8Mon page P.22 can not used for this motor.
Product Model Length Fit toStd · AccessoriesCode No.
Straight Type
Motor Cord <A Type> Angle
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
CodeNo. 1597 Model EM-3060
90˚Angle Type
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
• Torque Characteristics of EM-3060J
60504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
150.396.4
NR-3060S
53.9
EM-3060J
1768 EMCD-3000J-4M 3.7m
1767 EMCD-3000J-6M 5.7m
1766 EMCD-3000J-8M 7.7m
EM-3060J· EM-3030JEMS-3060K· EMS-3060AEMR-3008K· EMA-3020KEMA-3020S
• Air Hose• Connector Cap
(Provided)
1778 EMCD-3000J-3M 3.0m
Product Model Length Fit toStd · AccessoriesCode No.
Motor Cord <J Type>
Brushless Motor<Cord with Quick Disconnect>
EM-3060JELECTRICSYSTEM 1,000~60,000min-1350W
360g
530gø30mm
Motor SpeedMax. Power WeightO.D.
0.3m:
2m:
Motor Cord is sold separately. Please select a cord from the list below.
EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M /8M on page P.21 can not used for this motor.
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
ø30 0 -0
.02
96.4
Quick Disconnect Cord
2m
0.3m
CodeNo. 1765 Model EM-3060J
CodeNo. 1779 Model EM-3060J-2M
Brushless Motor with 0.3m Cord
Brushless Motor with 2m Cord
*EMCD-3000J-8M (8m long) can not used for this motor.
*EMCD-3000J-8M (8m long) can not used for this motor.
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M
Refer to the following Motor Cord table
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M / 8M
Refer to the following Motor Cord tableOPTIONMotor Cord <A Type> AngleEMCD-3000A-4M / 6M / 8M
Refer to the following Motor Cord table
OPTIONMotor Cord <S Type> StraightEMCD-3000-4M / 6M / 8M
Refer to the following Motor Cord table
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ21
1,000~32,000min-1280W360g
530gø30mm
Motor SpeedMax. Power WeightO.D.
0.3m:
2m:
P. 24P. 23
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” MOTOR, MOTOR CORD, SPEED REDUCER
*Please mention "Code Number" upon your order.
3230201000
4509
4008
3507
3006
2505
2004
1503
1002
501Continuous Duty Area
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Torque
Output
• EM-3030J has a 32,000min-1 max. This motors intendeddesign is for use with NAKANISHI angle spindles such as :RAX-271E / 71E, RA-271E, RAS-151E and RA-151E. These spindles have a 20,000-30,000min-1 max. input speed.
1768 EMCD-3000J-4M 3.7m
1767 EMCD-3000J-6M 5.7m
1766 EMCD-3000J-8M 7.7m
EM-3060J· EM-3030JEMS-3060K· EMS-3060AEMR-3008K· EMA-3020KEMA-3020S
• Air Hose• Connector Cap
(Provided)
1778 EMCD-3000J-3M 3.0m
Product Model Length Fit toStd · AccessoriesCode No.
Motor Cord <J Type>
• Torque Characteristics of EM-3030J
Brushless Motor<Cord with Quick Disconnect>
EM-3030JELECTRICSYSTEM
Motor Cord is sold separately. Please select a cord from the list below.
EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M / 6M /8M on page P.21 can not used for this motor.
CodeNo. 1769 Model EM-3030J
CodeNo. 1780 Model EM-3030J-2M
Brushless Motor with 0.3m Cord
Brushless Motor with 2m Cord
ø30 0 -0
.02
96.4
Quick Disconnect Cord
2m
0.3m
*EMCD-3000J-8M (8m long) can not used for this motor.
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
*EMCD-3000J-8M (8m long) can not used for this motor.
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M
Refer to the following Motor Cord table
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M / 8M
Refer to the following Motor Cord table
325gø30mm
Max. Rotating Speed at The Cutting Tool
30,000min-1
(Motor Speed)
Max. Allowable Motor Speed for The Spindle WeightO.D.
116
Reduction Ratio
1,870min-1
CodeNo. 1508 Model ARG-021E
Speed Reducer (1/16)
ARG-021EELECTRICSYSTEM
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc. • Grease for Reducer (10mL)
242gø30mm
Max. Rotating Speed at The Cutting Tool
30,000min-1
(Motor Speed)
Max. Allowable Motor Speed for The Spindle WeightO.D.
14
Reduction Ratio
7,500min-1
70
ø30
0 -0.0
1
8Grease Point
Maximum allowable motor speed for the spindle
30,000 min-1
Maximum rotating speed at the cutting tool
1,870 min-1
Maximum allowable motor speed for the spindle
30,000 min-1
Maximum rotating speed at the cutting tool
7,500 min-1
53
ø30
0 -0.0
1
8Grease PointNR-3060S ARG-011E
96.453.9 53
EM-3030J
203.3
NR-3060S
96.453.9 70
EM-3030J
220.3
ARG-021E
CodeNo. 1507 Model ARG-011E
Speed Reducer (1/4)
ARG-011E
To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internalgears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program.
To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internalgears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program.
ELECTRICSYSTEM
14
Reduction Ratio
116
Reduction Ratio
When using an angle type spindle or a speed reducer, do not exceed “ the maximum motor speed ” or “ the maximum rotating speed at the reducer ” for the spindle and the reducer.
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc. • Grease for Reducer (10mL)
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ23
• Using Selector connected to E3000 Control Unit.
• AC100-240V for international operation
• Up to 4 motors can be connected to E3000 providing individual control of each motor.(Simultaneous motor operation is not possible)
< Standard Equipment · Accessories >
• Power Cord : 2m • Connect Control Unit to Selector Unit Cable : 60cm
• Communication Cable : 60cm • Connector Cap (Provided)
• Plug to avoid Air Flow • Bracket • Power Cord Grip
• Screw • Rubber Pad • Fuse (T1.6AL) 250V : 2pcs.
120L / min(0.35MPa / Using max. 4 motor/spindles)
1.9kg
Air Flow Volume
AC 0.15A
Power Consumption Weight
4motors
Motor
< Specifications >
Power Source : AC100-240V
Dimensions : W88 x D138 x H238mm
P. 26P. 25
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SELECTOR UNIT
*Please mention "Code Number" upon your order.
ELECTRICSYSTEM E3000
*When connecting E3000 Control Unit to E3000 Selector Unit up to 4motors can be connected to E3000 Selector Unit providing individualcontrol of each motor. (4 motors can not be run simultaneously.)
*AC100-240V for international operation. Please check the power source plug type and order accordingly.
Motor Spindle
Compressor
Sequence
E3000SelectorUnit
E3000ControlUnit
Motor Selector
ON/OFF R/L
Motor Cord
Motor Cord
Connector for communication
Air
Air
Motor Spindle
Motor Spindle
Motor Spindle
CodeNo. 8425Plug
Type For 100V (A type)
CodeNo. 9781Plug
Type For 120V (B type)
CodeNo. 8426Plug
Type For 200V (C type)
CodeNo. 9782Plug
Type For 230V (D type)
ProductE3000
Selector Unit
Automatic Control System Chart
271
251
236
148138
65454.5
86.2
10
M4x0.7 Stepped Bracket
188168
88
246
65 45 4.586.2
10
M4x0.7Stepped Bracket
Bottom Mounting Back Mounting
Plug Type Main Usable Area Product
For JapanFor 100V (A type)
For U.S.A.and
Canada
For 120V(B type)
Power Source Plug
Without PlugFor 200V(C type)
For EuropeFor 230V(D type)
Mounting Bracket
Sequential Operation of up to 4 Motor / Spindles*4 motors can not be operated simultaneously.
SelectorUnit
88
238
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ25
P. 28P. 27
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION“E3000 SERIES” SPINDLE, MOTOR, SPEED REDUCER
*Please mention "Code Number" upon your order.
NR-2551
235.547.5
ARG-2504N
76.6 111.4
EM25N-5000-J4
ø25mm SpindleBRUSHLESS MOTOR & SPINDLE (Separate Type)
504030201000
4509
4008
3507
3006
2505
2004
1503
1002
501
Out
put
( W)
Torq
ue ( c
N. m
)
Speed ( x 103 min-1)
Continuous Duty Area
Torque
Output
76.616.9
ø15.
9
34.520.2
50 Max. Tool Mounting Depth
ø25
0 -0.0
1
Recommended Clamping Area
NR-2551
18876.6 111.4
EM25N-5000-J4
Brushless Motor(Cord with Quick Disconnect)
EM25N-5000- 4 5,000~50,000min-1250W(E3000 Control Unit)
250g(w/o Cord)
ø25mmELECTRICSYSTEM
Motor SpeedMax. Power WeightO.D.
J111.4
ø25
0 -0.0
1
0.3 m 3.7 m
50,000min-1
(Motor Speed)
ø3.175mm(CHB Group)
Within 1 µm 330gø26.8mm
RecommendedClamping Area
Allowable Motor Speed Collet ChuckSpindle Runout WeightO.D.Lever Type Spindle
NRR-2651ELECTRICSYSTEM
Exhaust air direction
78
Open and Close Lever
5.5
ø6.9
25.4
ø26.8 0-0.01
30.3
Max
. Too
l Mou
ntin
g De
pth
ø25 0-0.01
Reco
mm
ende
dCl
ampi
ng A
rea
35.8
30
NRR-2651
189.478 111.4
EM25N-5000-J4
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
*Outside diameter ø25.4mm type is also available.
< Standard Equipment · Accessories >
• Collet Chuck ø3.175mm (CHB-3.175)
• Spanner (6.1 x 8), (10 x 10), (22 x 27) : 1pc. each
< Optional >
Collet Chuck (CHB Group) : ø2.0, ø3.0, ø3.175, ø4.0mm
See Page 34 for details
CodeNo. 1835 Model NRR-2651
*There is not an outside diameter ø25.4mm dimension.
< Standard Equipment · Accessories >
• Cord with Quick Disconnect • Air Coolant Hose • Reducer
• Spanner (22 x 27) : 1pc.
CodeNo. 8334 Model EM25N-5000-J4
*There is not an outside diameter ø25.4mm dimension.
64.5ø2
50 -0
.01
Maximum allowable motor speed for the spindle
30,000 min-1
Maximum rotating speed at the cutting tool
1,870 min-1
47.5
ø25
0 -0.0
1
Maximum allowable motor speed for the spindle
30,000 min-1
Maximum rotating speed at the cutting tool
7,500 min-1
CodeNo. 1822 Model ARG-2504N
NR-2551
252.564.5
ARG-2516N
76.6 111.4
EM25N-5000-J4
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
*Outside diameter ø25.4mm type is also available.
CodeNo. 1824 Model ARG-2516N
14
Reduction Ratio
116
Reduction Ratio
150gø25mm
Max. Rotating Speed at The Cutting Tool
30,000min-1
(Motor Speed)
Max. Allowable Motor Speed for The Spindle WeightO.D.
14
Reduction Ratio
7,500min-1
Speed Reducer (1/4)
ARG-2504NELECTRICSYSTEM
When using an angle type spindle or a speed reducer, do not exceed “ the maximum motor speed ” or “ the maximum rotating speed at the reducer ” for the spindle and the reducer.
Spindle < Ceramic Bearings >
NR-255150,000min-1
(Motor Speed)
ø0.5~ø6.0mm(CHK Group)
Within 1 µm 253gø25mm
Allowable Motor Speed Collet ChuckSpindle Runout WeightO.D.
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265)
• Spanner (12 x 14) : 2pcs., (22 x 27) : 1pc.
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
Metal Saw Axis (KCH-03) : For ø6.0 (I.D.) x within ø30mm (O.D.)
Grindstone Axis (AGM-03) : For grinding wheel with I.D. of ø5.0mm
CodeNo. 1819 Model NR-2551
*Outside diameter ø25.4mm type is also available.
ELECTRICSYSTEM
ø25mm50,000min-1
250W ( )Max. Power
Max.
Outside Diameter
Using E3000 Control Unit
205gø25mm
Max. Rotating Speed at The Cutting Tool
30,000min-1
(Motor Speed)
Max. Allowable Motor Speed for The Spindle WeightO.D.
116
Reduction Ratio
1,870min-1
Speed Reducer (1/16)
ARG-2516NELECTRICSYSTEM
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ27
P. 30
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION
*Please mention "Code Number" upon your order.P. 29
“For 80,000min -1” SPINDLE, MOTOR
100V~240V
100V~240V
Compressor
Air Line Kit Refer to P.33
Air Line Kit AL-982+ Reducer (ø6 - ø4 Adaptor : 1pc.)
80,000min-1
80,000min-1
20,000~80,000min-1Collet Chuck CHA Group
Collet Chuck CHK Group
Chuck Nut K-265A
Chuck Nut CHN-A
Air Bearing SpindleNRAF-5080
SpindleNR-3080S
Brushless MotorEM-3080JEM-3080J-2M
Motor Cord <J type>
EMCD-3000J- 3M / 4M / 6M / 8M
(Cord with Quick Disconnect)
E3200 Selector Unit
E3200 Control Unit
Refer to P.31
Refer to P.32*Single motor can only
be operated at the same time. No simultaneous operation.
*For NR-3080S + EM-3080J
Air Line Kit AL-0201
*For NRAF-5080 (Air Bearing) + EM-3080J
*For NRAF-5080 (Air Bearing) + EM-3080J
+ Reducer (ø6 - ø4 Adaptor : 1pc.)Air Line Kit AL-A0611
• Torque Characteristics of EM-3080J
Out
put
( W)
1
0
2
3
4
5
6
7
8
9
20 30 40 50 60 70 80
300
350
400
250
200
150
100
50
0
Output
Continuous Duty Area
Torque
Torq
ue ( c
N. m
)Speed ( x 103 min-1)
80,000min-1
(Motor Speed)
ø0.5~ø4.0mm(CHA Group)
Within 1 µm 170gø30mm
Allowable Motor Speed Collet ChuckSpindle Runout WeightO.D.Spindle < Ceramic Bearings >
NR-3080S
Separate Type ø50, ø30mmELECTRICSYSTEM
ELECTRICSYSTEM
< Standard Equipment · Accessories >
• Spanner (22 x 27) : 1pc.
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHA-3.0) • Chuck Nut (CHN-A)
• Spanner (12 x 14) : 2pcs., (22 x 27) : 1pc.
< Optional >
Collet Chuck (CHA Group) : ø0.5~ø4.0mm See Page 34 for details
Motor Cord is sold separately. Please select a cord from the list below.
EMCD-3000-4M / 6M / 8M and EMCD-3000A-4M /6M / 8M on page P.21 can not used for this motor.
*Please refer to the concerned product introduction page about the details.
CodeNo. 1783 Model NR-3080S
80,000min-1
(Motor Speed)
ø0.5~ø6.0mm(CHK Group)
Within 1 µm 810gø50mm
Allowable Motor Speed
35NL/min(0.5MPa)
Air Bearing Consumption Collet ChuckSpindle Runout WeightHousing DiameterAir Bearing Spindle
NRAF-5080ELECTRICSYSTEM
< Standard Equipment · Accessories >
• Collet Chuck ø3.0mm (CHK-3.0) • Chuck Nut (K-265A)
• Spanner (12 x 14) : 2pcs., (22 x 27) : 1pc.
• Fitting for piping (KQ2H04-M5-X2) : 1pc. • Plug (KQ2P-04) : 1pc.
• Inlet Air Hose : ø4mm x 4m, 1pc. • Bar Wrench (K-236) : 1pc.
< Optional >
Collet Chuck (CHK Group) : ø0.5~ø6.0mm See Page 34 for details
< Specifications >
Main body mount method : Flange mounting method,
M3 bolt (8 locations, 45˚ Angle, PDC57)
Bearing Type : Air static bearing
Bearing Load Capacity : Radial : 20N, Thrust : 40N
Useable Max. Diameter of Grindstone : Less than ø8mm (For ø6.0mm shank)
Hose Diameter Air Inlet · Bearing : ø4.0mm
PC
D 5
7ø6
5
ø48
16.912 21.8 25 15.58
99.282.3
ø50
-0.0
25 0
8-ø3.5 through hole8-ø6.5 head depth 3.5
22.5
45
22.5
CodeNo. 1782 Model NRAF-5080
20,000~80,000min-1350W360g
530gø30mm
Motor SpeedMax. Power WeightO.D.Brushless Motor<Cord with Quick Disconnect>
EM-3080JELECTRICSYSTEM
0.3m:
2m:
CodeNo. 1781 Model EM-3080J
CodeNo. 1788 Model EM-3080J-2M
Brushless Motor with 0.3m Cord
Brushless Motor with 2m Cord
1768 EMCD-3000J-4M 3.7m
1767 EMCD-3000J-6M 5.7m
1766 EMCD-3000J-8M 7.7m
EM-3080J• Air Hose• Connector Cap
(Provided)
1778 EMCD-3000J-3M 3.0m
Product Model Length Fit toStd · AccessoriesCode No.
Motor Cord <J Type>
129.732 97.7
EM-3080J
NR-3080S
EM-3080JNRAF-5080
164.566.8 97.7
14.7 32
31.3 Max. Tool Mounting Depth
28.33.7Recommended Clamping Area
ø30
ø11.
80 -0.0
1
2m
0.3m
ø30
-0.0
2-0
.03
97.7
Quick Disconnect Cord *EMCD-3000J-8M (8m long) can not used for this motor.
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M
Refer to the following Motor Cord table
OPTIONMotor Cord <J Type>
EMCD-3000J-3M / 4M / 6M / 8M
Refer to the following Motor Cord table
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ29
P. 31
“For 80,000min -1” CONTROL UNIT, SELECTOR UNIT
P. 32
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION
*Please mention "Code Number" upon your order.
88
238
236
138144
271
251
6591
45
10
4.5
M4x0.7Stepped Bracket
168
246
13888
188M4x0.7Stepped Bracket
65 4586.2
4.5
10
Bottom Mounting Back Mounting
Plug Type Main Usable Area Product
For JapanFor 100V (A type)
For U.S.A.and
Canada
For 120V(B type)
Power Source Plug
Without PlugFor 200V(C type)
For EuropeFor 230V(D type)
Mounting Bracket
< Specifications >
Power Source : AC100-240V
Motor Speed : 1,000-80,000min-1
Max. Output Power : 350W
Power Consumption : AC 1.8A
Air Flow Volume : 30L/min (0.25-0.3MPa)
Weight : 2.8kg
Dimensions : W88 x D138 x H238mm
< Standard Equipment · Accessories >
• Power Cord : 2m • Air Hose with filter • Reducer
• Air Plug (Provided) • Connector Cap (Provided)
• Bracket • Power Cord Grip • Screw • Rubber Pad
• Fuse (T6.3AL) 250V : 2pcs.
AC100-240V forinternational operation
External Input / Output Control Signal Operation
•External InputMotor Rotating / StoppedError ReleasedRotating DirectionMotor Speed Setting and etc.
•Parameter SettingMaximum motor speed setting,Fix the motor speed
•External MonitorMotor CurrentErrorWarningRotating pulse and etc.
• Load Meter
•: Continuous load area
•: Intermittent load area
•: Overload
• • • • • •LOAD
88
238
• Using Selector connected to E3200 Control Unit.
• AC100-240V for international operation
• Up to 4 motors can be connected to E3200 providing individual control of each motor.(Simultaneous motor operation is not possible)
< Standard Equipment · Accessories >
• Power Cord : 2m • Connect Control Unit to Selector Unit Cable : 60cm
• Communication Cable : 60cm • Connector Cap (Provided)
• Plug to avoid Air Flow • Bracket • Power Cord Grip
• Screw • Rubber Pad • Fuse (T1.6AL) 250V : 2pcs.
< Specifications >
Power Source : AC100-240V
Dimensions : W88 x D138 x H238mm
*When connecting E3200 Control Unit to E3200 Selector Unit up to 4motors can be connected to E3200 Selector Unit providing individualcontrol of each motor. (4 motors can not be run simultaneously.)
*AC100-240V for international operation. Please check the power source plug type (P.31) and order accordingly.
Motor Spindle
Compressor
Sequence
E3200SelectorUnit
E3200ControlUnit
Motor Selector
ON/OFF R/L
Motor Cord
Motor Cord
Connector for communication
Air
Air
Motor Spindle
Motor Spindle
Motor Spindle
CodeNo. 8466Plug
Type For 100V (A type)
CodeNo. 8467Plug
Type For 120V (B type)
CodeNo. 8468Plug
Type For 200V (C type)
CodeNo. 8469Plug
Type For 230V (D type)
ProductE3200
Selector Unit
Automatic Control System Chart
*AC100-240V for international operation. Please check the power source plug type and order accordingly.
CodeNo. 8442Plug
Type For 100V (A type)
CodeNo. 8443Plug
Type For 120V (B type)
CodeNo. 8444Plug
Type For 200V (C type)
CodeNo. 8445Plug
Type For 230V (D type)
ProductE3200
Control Unit
Sequential Operation of up to 4 Motor / Spindles*4 motors can not be operated simultaneously.
1,000~80,000min-1 350W 2.8kg
Motor Speed Max. Power
AC100~240V
Power Source
AC 1.8A
Power Consumption Weight
271
251
236
148138
65454.5
86.2
10
M4x0.7 Stepped Bracket
188168
88
246
65 45 4.586.2
10
M4x0.7Stepped Bracket
Bottom Mounting Back Mounting
Mounting Bracket
120L / min(0.35MPa / Using max. 4 motor/spindles)
1.9kg
Air Flow Volume
AC 0.15A
Power Consumption Weight
4motors
Motor
ELECTRICSYSTEM E3200 Selector
Unit
ELECTRICSYSTEM E3200 Control
Unit
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:46 AM ページ31
P. 34
CNC LATHES, SPECIAL PURPOSE MACHINES
AND ROBOT AUTOMATION SOLUTION
CHA-3.175
CHA-4.0
CHA-3.0
CHA-2.35
CHA-[][]
Product ModelInside Diameter : ød Fit to Code No.
-
91440914939143091492
ø3.175
ø4.0
ø0.5, ø0.6, ø0.7, ø0.8, ø0.9
ø1.0, ø1.5, ø2.0, ø2.5, ø3.5
ø1.6
ø1.1, ø1.2, ø1.3, ø1.4, ø1.7, ø1.8, ø1.9ø2.1, ø2.2, ø2.3, ø2.4, ø2.6, ø2.7, ø2.8, ø2.9ø3.1, ø3.2, ø3.3, ø3.4, ø3.6, ø3.7, ø3.8, ø3.9
ø0.5, ø0.6, ø0.7, ø0.8, ø0.9
ø1.0, ø1.5, ø2.0, ø2.5, ø3.5, ø4.5, ø4.76, ø5.5
ø1.1, ø1.2, ø1.3, ø1.4, ø1.7, ø1.8, ø1.9ø2.1, ø2.2, ø2.3, ø2.4, ø2.6, ø2.7, ø2.8, ø2.9ø3.1, ø3.2, ø3.3, ø3.4, ø3.6, ø3.7, ø3.8, ø3.9ø4.1, ø4.2, ø4.3, ø4.4, ø4.6, ø4.7, ø4.8, ø4.9ø5.1, ø5.2, ø5.3, ø5.4, ø5.6, ø5.7, ø5.8, ø5.9
ø1.6, ø5.0
ø3.0
ø2.35
CHK-2.35
CHK-3.0
CHK-3.175
CHK-4.0
CHK-6.0
CHK-6.35
CHK-[][]
ø2.35
ø3.0AA*
ø3.0
ø3.175
ø4.0
ø6.0
ø6.35
CHSS-2.35
CHSS-3.0
CHSS-3.175EMA-3020S
NR40-5100ATCNRR-3060, NRR-2651
RA-271E
EM20-S6000, EM25-S6000EMS-3060A, NR-3080SNRAF-5080
*High precision type
EM30-S6000, EMA-3020KEMS-3060K, EMR-3008KNR-151E, NR-2551NR-3060S, NR-403ENR-453E, RAS-151ERAX-271E, RAX-71E
*High precision type
ø2.35
ø3.0
ø3.175
CHSS-[][]
CHB-2.0
CHB-3.0
CHB-3.175
CHB-4.0
ø1.0, ø1.5, ø2.0, ø2.5
ø2.0
ø3.0
ø3.175
ø4.0
Collet Chuck CHA Group
Collet Chuck CHK Group
ø7.4
17d
ø7.4
15.5d 3
Collet Chuck
91592
914959149691494
CHK-3.0AA 91597
9153091593915409156091596
-
930929303093093-
92820928309289392840
CHS-2.35
CHS-3.0
CHS-3.175
CHS-1.6
CHS-[][]
ø2.35
ø3.0
ø3.175
ø1.6
ø1.0, ø2.0, ø2.5
ø0.8, ø0.9
ø1.1, ø1.2, ø1.3, ø1.4, ø1.5, ø1.7, ø1.8, ø1.9ø2.1, ø2.2, ø2.3, ø2.4, ø2.6, ø2.7, ø2.8, ø2.9
90592905309059390516
-
NR50-5100 ATC
CHR-3.0
CHR-3.175
CHR-6.35
CHR-2.0
CHR-4.0
CHR-6.0
ø3.0
ø3.175
ø6.35
ø2.0
ø4.0
ø6.0
919309199391996919209194091960
23.5d
ø10.
5
20d
ø10.
5
21d 3
ø3.175AA* CHK-3.175AA 91598ø4.0AA* CHK-4.0AA
ø3.0AA* CHA-3.0AA
ø3.175AA* CHA-3.175AA
ø4.0AA* CHA-4.0AA
91599ø6.0AA* CHK-6.0AA 91600ø6.35AA* CHK-6.35AA 91601
RA-151E
CH8-2.35
CH8-3.0
CH8-3.175
CH8-[][]
ø2.35
ø3.0
ø3.175
ø0.8, ø0.9
ø1.0, ø1.5, ø2.0, ø2.5
ø1.1, ø1.2, ø1.3, ø1.4, ø1.6, ø1.7, ø1.8, ø1.9ø2.1, ø2.2, ø2.3, ø2.4, ø2.6, ø2.7, ø2.8, ø2.9
910929103091093
-
34.4d
Collet Chuck CH8 Group
Collet Chuck CHR Group
23.5d
Collet Chuck CHSS Group
Collet Chuck CHB Group
Collet Chuck CHS Group
35d
30d
P. 33
AIR LINE KIT, PARTS
19020 20
230
155
200
3030
60
110
PF1/4
Air Line Kit
AL-0201 (For ø6mm Hose)
Air Line Kit
AL-A0611 (For ø6mm Hose)
Air Line Kit
AL-982 (For ø6mm Hose)
Product Description / Specifications Fit to
8407E3000 Control UnitE3200 Control Unit
Operation Panel Extension Cord (4m)
Code No.
Operation Panel Extension Cord
PF1/4
475445
4-ø7
430
390
ø6
ø6
2020
15 15
Exterior screwType�
The AL-0201 is a Clean air supply unit. Dust and moisture in the compressed air are eliminated by the filter in the first stage and regulator provides accurate and stable air to the control unit.
< Standard Equipment · Accessories >
• Air Filter • Air Regulator • Air Pressure Gauge
• Air ON-OFF Valve • Hose for Piping (K-275) : 2m
CodeNo. 1541 Model AL-0201
Filter Mesh 0.3 µm
< Standard Equipment · Accessories >
• Air Filter • Air Regulator • Air Pressure Gauge • Air ON-OFF Valve
• Hose for Piping (K-275) : 2m
CodeNo. 1227 Model AL-982
Filter Mesh 0.3 µm
Use AL-982 for NRAF-5080
Use AL-A0611 for NRAF-5080 with a high grade air supply
[Solenoid Operated Air Valve]
[Simple Handling Valve Control]
The AL-A0611 is a high grade air supply unit for the Air BearingSpindle. Filter Mesh 0.01µm is realized with micro mist filter.
CodeNo. 1548 Model AL-A0611
Filter Mesh 0.01 µm
< Standard Equipment · Accessories >
• Mist Separator • Micro Mist Separator • Membrane Air Dryer
• Regulator • Solenoid Valve
*Exterior screw Type (Model KK13P-02M made by SMC Corporation)
The AL-982 is a simple air supply unit. This unit supplies air to theair bearing and air turbine chambers individually.
*Please mention "Code Number" upon your order.
Model : CHA-1.0,CHA-3.0, CHA-3.0AA,CHA-3.175, CHA-3.175AA, CHA-4.0, CHA-4.0AA
Model : Besides the above
Model : Besides the above
Model : CHK-1.0, CHK-3.0, CHK-3.0AA, CHK-3.175, CHK-3.175AA, CHK-4.0, CHK-4.0AA, CHK-6.0, CHK-6.0AA, CHK-6.35, CHK-6.35AA
0p13-p34_E3000_K243Ev2_1010 10.10.25 1:47 AM ページ33