Please note: Please note: If you have obtained this packet from anyone other than me, Paul

Johnson, or my website (www.pjsqualitybacklinks.com) or the Warrior Forum, you have

received a stolen copy. Anyone who violates the copyright on my product will be prosecuted

to the fullest extent of the law. To report any abuse, please contact me here:

http://www.pjsqualitybacklinks.com/index.php?page=contact

June’s 2010 - 120 Backlink Packet

First I would like to thank you for subscribing to Paul’s Quality Backlinks; I assure you that you will really enjoy this

service and the quality of the backlinks I provide. Also, before you start link building, there’s some important

information you should know regarding backlinks.

You may have heard from people that do not have complete knowledge about Search Engine algorithms, say that

leaving your link on an “inner page” that has a low or 0 Page Rank inside of a high Page Rank domain will do your

link no good. This is completely false.

I have several websites ranking very high on the first page of Google (five of which, are number one) out of

hundreds of thousands of competing sites. The demo site (http://howtomakeadiapercakehq.com) that I use for

these links, is sitting on the first page of Google, on the 1st

spot out of over 338,000 sites for the keyword “how to

make a diaper cake”, this site also carries a Page Rank of 4. I have done all this by using this same method of linking

in inner pages of high PR authority sites. These links are simply amazing, and they will do wonders for your

keywords & sites. Imagine if you only have to complete with 250,000 or less competing sites, you will be able to

dominate your competition!

Matt Cutts, the head of Google’s webspam team was asked about above statement, but he couldn’t give a straight

answer due to the question being too close to Google’s algorithm. You will find part of the interview below.

“Stephan Spencer: OK. So, I guess, a follow on to that would be: a .edu and .gov link, and so forth, has, typically,

a more pristine link neighborhood, so it is not just about the PageRank, right? The link neighborhood comes into

play.

Matt Cutts: That is a little bit of a "secret sauce" question, so I am not going to go into how much we do trust

that sort of stuff.

Stephan Spencer: OK. I am going to slap my wrist now. Ouch, ouch!

Matt Cutts: [laughing]”

For the entire interview: http://www.stephanspencer.com/search-engines/matt-cutts-interview

Note: If you’re not already subscribed to Angela V. Edwards monthly backlink packets, I highly urge you to do so

now. Angela is a long time member of the Warrior Forum, and she has a program that provides you with 30 new

High Page Rank (PR.4 – PR. 9) backlinks at the cost of only $5 per month, with your first packet being free. We are

not in any way competing with each other, but rather working as a team to provide you with the largest amount of

the highest quality backlinks you can obtain every month. With both of our programs combined, you will get the

maximum search engine results that you can get without spending hundreds or even thousands of dollars a month.

Click here for Angela’s program: http://www.easybacklinkbuilder.com/

If you need your links done for a low cost, click on the link below for more

information.

Backlink Service: http://paulsqualitybacklinks.com/Paul-&-Angela%27s-Backlink-Service.html

Previous Packets

Click here for all pervious packets: http://paulsqualitybacklinks.com/pervious-packets.html

Amazing New Product!!

I am excited to introduce the new product that Sean Donahoe just released. I still can't believe how

awesome it is, this backlink booster is so powerful that it literally boost the power of your backlinks by

over 1000%, the potential is still making my head spin with possibilities.

Here’s the video that explains the program

http://themanicmarketer.com/product/backlink-booster/pj

http://ph.contiki.com/ - Page Rank 7

First you will want to register

Registration Link: http://ph.contiki.com/people/new

After you have registered, you will need to click “My Profile” link

Next, click on “My Photo Album” link

Now, click on “Add more photos”

Once you have uploaded a photo, use your HTML code in the “Add captions to your photos”

section.

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

After you save your changes, you will be taken to the public view of your anchor text links

http://www2.turnto10.com/ - Page Rank 6

First you will want to register

Registration Link: http://users.turnto10.com/register/

After you have registered, you will need to click “My Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your links

http://www.ecotonejournal.com/ - Page Rank 5

First you will want to sign up

Sign up Link: http://www.ecotonejournal.com/index.php/members/login/

After you have registered, you will need to go to this URL:

http://www.ecotonejournal.com/index.php/member/memberlist

Next, click on “Your Control Panel” link

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.globalmapperforum.com/forums/ - Page Rank 5

First you will want to register

Registration link: http://www.globalmapperforum.com/forums/register.php

Once you have registered, click on “Profile” link

Next, you will need to click on the “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.forexpros.com/ - Page Rank 5

First you will need to click on the tab that says “Forums”

Now you will need to register a new account

Once you have registered, click on “Profile” link

Next, you will need to click on the “Edit Your Details” link

Then put your Website URL on the “Home Page URL” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://plugcomputer.org/ - Page Rank 6

First you will need to click on “go to forum” link

Now you will need to register a new account. Click on the “key” icon.

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://softery.com/ - Page Rank 6

First you will need to click on the tab that says “Forum”

Now you will need to register a new account.

Once you have registered, click on “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your “Profile” link again

Here’s the public view of your anchor text links (Note: you need to log off first to see your links)

http://www.caseyfamilyservices.org/ - Page Rank 6

First you will want to register

Registration Link: http://www.caseyfamilyservices.org/index.php/member/register/

After you have registered, you will need to go to

http://www.caseyfamilyservices.org/index.php/member/login/

Now you will need to go to and click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.hometheaterforum.com/ - Page Rank 5

First you will want to join

Join us: http://www.hometheaterforum.com/join

Once you have registered, click on your username

Next, go to “Your Forum Signature” and click on “Edit Signature Text”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

Once you saved your changes, you will be taken to the public view of your links

http://www.alexandrashouse.com/ - Page Rank 4

First you will need to click on the tab that says “Community”

Now you will need to register a new account

After you have registered, you will need to click “Profile” link

Next, click on “Signature”

To create your anchor text, use your BBC code in the “Signature” section.

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on “Profile”

Here’s the public view of your anchor text links

http://www.elementsvillage.com/forums/ - Page Rank 4

First you will want to register

Registration Link: http://www.elementsvillage.com/forums/register.php

Once you have registered, click on “Profile” link

Then click on “Edit Your Details” link

Then put your Website URL on the “Home Page URL” section

To see the public view of your anchor text, click on the link that says “Your Profile”

Here’s the public view of your anchor text links

http://www.hometheaterfocus.com/ - Page Rank 4

First you will need to click on the tab that says “News Blog”

Now you will need to register a new account.

Once you have registered, click on your username

To create your anchor text, use your HTML code in the “Signature” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://majorityrights.com/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now you will need to register a new account.

Now you will need to go to and click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Your Public Profile”

Here’s the public view of your anchor text links

http://www.crofting.org/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now you will need to register a new account.

Now you will need to go to and click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “Your Public Profile”

Here’s the public view of your anchor text links

http://linuxdriverproject.org/foswiki/bin/view - Page Rank 5

First you will want to register

Registration link: http://linuxdriverproject.org/foswiki/bin/view/System/UserRegistration

Once you have registered, click on your username

Next, click on “edit”

To create your anchor text, use your HTML code in the “Comment” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your links

http://www2.tricities.com/ - Page Rank 6

First you will want to register

Registration Link: http://users.tricities.com/register/

After you have registered, you will need to click “My Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your links

http://www.sxswbaby.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.sxswbaby.com/index.php/member/register/

After you have registered, you will need to click “Your Control Panel” link

Then click on “Edit Profile” link

To create your anchor text, use your BBC code in the “Bio” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.contrexx.com/forum/ - Page Rank 4

First you will want to register

Registration link: http://www.contrexx.com/forum/register.php

Once you have registered, click on “Profile” link

Next, you will need to click on the “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.bizsugar.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.bizsugar.com/register

Once you have registered, click on “My Profile” link

Next, click on “Modify” button

Then put your Website URL on the “HomePage” section

To see the public view of your anchor text links, just click on your username

Here’s the public view of your anchor text links

http://www.adventuredevelopers.com/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now you will need to register a new account.

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://chessok.com/ - Page Rank 4

First you will need to click on the tab that says “ChessOK Forum”

Now you will need to register a new account.

Once you have registered, click on “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your “Profile” link again

Here’s the public view of your anchor text links (Note: you need to log off first to see your links)

http://www.ifightdragons.com/ - Page Rank 5

First you will want to join

After you have signed up, put your mouse over your username, you will see a drop down menu

pull up, click on the link that says “edit profile

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click put your mouse over your username, you will

see a drop down menu pull up, click on the link that says “view profile”

Here’s the public view of your anchor text links

http://www.connectmaldives.com/ - Page Rank 4

First you will want to register

Registration link: http://www.connectmaldives.com/index.php?do=/public/signup/

After you have registered, click on “Settings”

Next, click on “Profile Settings”

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “My Page” tab

Here’s the public view of your anchor text links

http://www.cheftalk.com/ - Page Rank 5

First you willwant to join

Join us: http://www.cheftalk.com/join

Once you have registered, click on your username

Next, go to “Your Forum Signature” and click on “Edit Signature Text”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

Once you saved your changes, you will be taken to the public view of your links

http://wireless.com.pt/forum/ - Page Rank 4

First you will want to register

Registration Link: http://wireless.com.pt/forum/index.php?action=register

After you have registered, click on “profile” link

Next, click on the link that says “Forum Profile Information”

To create your anchor text, use your BBC code in the “Signature” section. You can also

put your URL in the section that says “Website URL” and place your keyword in the “Website

title” box. Your title will become your anchor text keyword

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on the links that says “summary”

Here’s the public view of your anchor text links

http://www.kapanga.net/IP/home.cfm - Page Rank 4

First you will need to click on the tab that says “Community

Now, you will need to register a new account

Once you have registered, click on “Profile” link

Next, click on “Personality”

To create your anchor text, use your BBC code in the “Signature” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your “Profile” link again

Here’s the public view of your anchor text links (Note: you need to log off first to see your links)

http://forums.bleachexile.com/ - Page Rank 4

First you will want to register

Registration link: http://forums.bleachexile.com/register.php

After you have registered, you will need to click “Profile” link

Next, you will need to click on the “Edit Signature” link

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

To see the public view of your anchor text links, just click on “Your Profile”

Here’s the public view of your anchor text links

http://liwa-project.eu/ - Page Rank 6

First you will need to click on the tab that says “Please login”

Then click on “Member Registration” link

Now you will need to go to and click on “Your Control Panel”

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.2bo4.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.2bo4.com/member/register/

Once you have registered, click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your BBC code in the “Bio” section

BBC Code: [url=http://www.yourdomain.com]Your Keyword[/url]

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://us.toluna.com/ - Page Rank 4

First you will want to register

Registration link: http://uk.toluna.com/Register.aspx

After you have registered, put your mouse over the “You” tab, you will see a drop down menu,

click on “Your public profile”

To create your anchor text, use your HTML code in the “Public Messages” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your links

http://www.thumpertalk.com/ - Page Rank 4

First you will want to join

Join link: http://www.thumpertalk.com/join

After you have joined, click on your username

Next, click on “Edit Signature Text”

You are given a WYSIWYG editor to create your anchor text links in the “Signature” section

Once you saved your changes, you will be taken to the public view of your links

http://forums.comingsoon.net/ - Page Rank 5

First you will want to register

Registration link: http://forums.comingsoon.net/register.php

After you have registered, you will need to click “Profile” link

You are given a WYSIWYG editor to create your anchor text links in the “Visitor Messages”

section

Once you saved your changes, you will be taken to the public view of your links

http://nasworegon.org/ - Page Rank 5

First you will want to register

Registration Link: http://nasworegon.org/member/register

After you have registered, you will need to go to http://nasworegon.org/member/login

Now you will need to go to and click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://prologika.com/ - Page Rank 4

First you will need to click on “Forums” link

Now you will need to register a new account. Click on “Join”

After you have registered, click on “Edit” link

You are given a WYSIWYG editor to create your anchor text links in the “Bio” section

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.campusrxbio.com/ - Page Rank 6

First you will want to register

Registration Link: http://www.campusrxbio.com/index.php/member/register

After you have registered, you will need to go to

http://www.campusrxbio.com/index.php/member/login

Now you will need to go to and click on “Your Control Panel”

Next, click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://priyo.com/ - Page Rank 4

First you will want to register

Registration Link: http://priyo.com/user/register

After you have registered, you will need to click “Edit” link

Next, click on “Personal Information” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on “View”

Here’s the public view of your anchor text links

http://www2.timesdispatch.com/ - Page Rank 6

First you will want to register

Registration Link: http://users.timesdispatch.com/register/

After you have registered, you will need to click “My Profile” link

To create your anchor text, use your HTML code in the “About Me” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

Once you saved your changes, you will be taken to the public view of your links

http://www.squawkradio.com/ - Page Rank 4

First you will want to register

Registration Link: http://www.squawkradio.com/index.php/member/register/

After you have registered, click on “Your Control Panel” link

Then click on “Edit Profile” link

To create your anchor text, use your HTML code in the “Bio” section

HTML code: <a href="http://www.yourdomain.com">Your Keyword</a>

To see the public view of your anchor text, click on your username

Here’s the public view of your anchor text links

http://www.construction-resource.com/ - Page Rank 4

First you will need to click on the tab that says “Forums”

Now you will need to register a new account

Once you have registered, click on “Profile” link

Then click on your username

You are given a WYSIWYG editor to create your anchor text links in the “Visitor Messages”

section

Once you saved your changes, you will be taken to the public view of your links

http://www.faqpal.com/ - Page Rank 5

First you will want to register

Registration Link: http://www.faqpal.com/register

Once you have registered, click on “Profile”

Next, click on “Modify” button

Then put your Website URL on the “HomePage” section

To see the public view of your anchor text links, just click on “Profile” link again

Then click on “Personal Info” link

Here’s the public view of your anchor text links

http://www.klc.org.pk/board/ - Page Rank 5

First you will want to register

Registration Link: http://www.klc.org.pk/board/index.php?action=register

Once you have registered, click on “Profile” link

Next, click on the link that says “Forum Profile Information”