23537 Rotating Equipment Catalog

Sealing Solutions

Industrial Lubricants & MRO Chemicals

ARC Efficiency & Protective Coatings

ROTATING EQUIPMENT SOLUTIONSP R O D U C T C ATA LO G

SEALING SOLUTIONS FOR ROTATING EQUIPMENT

Providing Complete Solutions Through Innovation and Superior ServiceUnparalleled in the IndustryAt Chesterton, we place strong emphasis on working together as partners to provide real solutions. Our high service levels are delivered by combining both industry and product knowledge with experience to implement Best Available Techniques. Our wide geographical reach and local service capabilities enable us to be responsive to your needs.

Reliability through InnovationTo be a full service provider takes a wide array of high quality, engineered sealing products that address your needs. Innovative, high performance products are the core of Chestertons offerings as a premier sealing solution provider. Some of our standard offerings are:

Improving Productivity with High Impact ProgramsIn todays global economy, our clients are faced with increased profitability pressures. Chesterton can assist users in achieving their productivity goals by improving asset reliability and lowering the total cost of ownership. Our programs are easily customized for each plant to:

Q Improve equipment availabilityQ Increase process throughputQ Lower total cost of ownership

Q Split SealsQ Cartridge SealsQ Gas SealsQ Component SealsQ Pump Packing

Q Bearing and Gearbox Protection

Q Rotary SealsQ Environmental Controls

Delivering Results for IndustryMeeting industry needs requires a thorough knowledge and understanding of the key drivers specific to a plant. Chestertons depth of experience allows us to deliver results such as:

Q Increased equipment reliabilityQ Reduced water consumption Q Reduced environmental emissionsQ Increased energy efficiency

TA B L E O F CO N T E N T S

Sealing Solutions for Rotating Equipment Mechanical Seals .......................................................................06 Split Seals ....................................................................................06 Environmental Controllers ....................................................07 Gas Seals ......................................................................................08 Cassette Seals ............................................................................09 Cartridge Seals ..........................................................................10 Slurry Seals ..................................................................................11 Pump Packing .............................................................................12 Plant-Wide Packing ..................................................................12 Slurry Packing ............................................................................13 SuperSet Enhanced Packing Sets ....................................17 Bearing and Gearbox Protection ......................................19 Rotary Seals .................................................................................20

ARC Efficency & Protective Coatings Erosion Resistant Coatings for Metals ...............................23 Coatings for Corrosion, Erosion,

and Chemical Attack for Metal ............................................24 Thin Film Coatings for Concrete ..........................................26

Abrasion Resistant Coatings for Metals .............................. 27

Industrial Lubricants and MRO Chemicals Lubricants and Greases ..........................................................28 Liquid Lubricants ......................................................................29 Greases .........................................................................................29 Lubricant Dispensers...............................................................30 Thread Lubricants/Anti-seize ...............................................31 Maintenance Specialties .......................................................32 Penetrating Oils.........................................................................32 Thread Sealing ...........................................................................32 Flange Sealing ...........................................................................33 Cleaners and Degreasers ......................................................33 Water-based Alkaline Cleaners ............................................33 Water-based Acid Cleaners ...................................................35 Solvent-based Cleaners..........................................................35 Contact Cleaners ......................................................................35 Corrosion Control .....................................................................36 Corrosion Control .....................................................................36 NSF Registered Products .......................................................37

Whether advanced shaft sealing, gearbox protection or protective coatings, Chesterton provides the total solution for improved pump reliability.

Polymer Labyrinth SealLabyrinth seal for pumps,

motors, and gearboxes

Advance Lubrication Technology

Chestertons QBT technology. Extends bearing life. Resists

wear, load and corrosion.

Machinable Composite Rebuild and protect

worn shafts

Protective Coating for Concrete & MetalsProtect pump base plate,

frame and pump base

Other ARC Efficency & Protective Coatings Products

Other Maintenance and Repair Products

Anti-seize Prevent rust and seizure bolts

and prevent fretting and corrosion while securing bearings

Cold Galvanizing Compound Micronized particles of pure

zinc protects against Galvanic Corrosion. Use on bolting, weld

seams and supports.

Thread SealingHigh performance PTFE

tapes and paste

GasketingMake any size gasket

with Moldable Polymer Gasketing

Chesterton Solutionsfor Rotating Equipment

Advance Lubrication Advance Lubrication

Automatic Microprocessor Controlled Dispensing System

Delivers precise volumes of lubricant. Simple to

use and install.

Bearing Protection Protect the bearing housing

with high performance bearing seal

Cartridge SealsUpgrade seal performance with Single Cassette Seals

or S20 Dual

Split SealsSuperior performance with easy installation

Pump PackingReduce maintenance cost

and sleeve wear

SuperSetUpgrade to the enhanced packing system to extend

equipment life

Environmental ControlsEliminate abrasive particles

in the stuffing box and extend seal and packing life

Restriction Bushings Protect the stuffing box

and reduce the flush rate

Stuffing Box SealingHigh reliability stuffing box

sealing solutions for high viscosity fluids and powders

Protective Coatings for Metals

Rebuild, restore and coatimpeller vanes and volute

E i t l C t l

with easy installation

C t id S l

P P ki

Mec

hani

cal S

eals

66

Support Products

442C

Operating Conditions Materials Sizes 25 mm to 120 mm Faces CB, CER, RSC (1.000" to 4.750")

Pressure* 710 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM to 30 bar g (450 psig)

Temperature 120C (250F) Metals 1.4401 (316SS)

Speed 20 m/s (4000 fpm) Springs Elgiloy

ATEX Category I, Group 2 Approved, Fits ISO-3069, ACS Approved

* Seal pressure capabilities are dependent on the fluid sealed, temperature, speed, and seal face combinations.

Cartridge Split Mechanical SealThe 442C Cartridge Split Mechanical Seal is the latest innovation in split seal technology, combining superior performance with the ease-of-installation of a cartridge split seal.

Q Simple cartridge installationwithout equipment disassembly

Q Innovative design with superior performance

Q Fits the majority of rotating equipmentQ Easy field repair

442MSplit Mixer SealThe mixer version of the standard split seal that accommodates large radial and axial shaft motion associated with mixers, agitators, reactors, and blenders.

442PRSplit Pumping Ring SealThe high-capacity pumping ring provides for maximum heat removal and reliability in hot water services such as heater drain and boiler feed pumps.

C

oggy,

l.

Q Simpmplele ccarartrtridge insnssttaalllatatioonwithout equipment disasseembly


Elgiloy is a registered trademark of Elgiloy Specialty Metals.

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t

7Mec

hani

cal S

eals

SpiralTracEnvironmental ControllersWhen used with Chesterton mechanical seals, SpiralTrac Environmental Controllers greatly enhance seal reliability by effective removal of solids and improved cooling of the stuffing box.

Q Extends seal reliability in most rotating equipment applications

Q Reduces cost of flushing in abrasive applications

Q Fits all rotating equipment

Versions F (Split) Greatly reduced flush

N Reduced/No flush in no fibrous fluids

D Reduced/No flush in fibrous fluids

P (Split) Packing version

C With drain for crystallizing media

Configurations Available

Split Adapter Standard Packing

2

1

3

4

SpiralTrac 1 Air Vented from cavity when pump is stationary (eliminates

crystalization, coking overheating due to air)

2 Circulation Driven around seal (excellent face cooling)

3 Exchange In and out of cavity (heat removed from cavity)

4 Particulate Immediately removed from cavity through the exit

groove, flush or no flush

Air Vent

Optional Flush

Available Materials 1.444001 ((3116SS)

416 SS

PTFE Glass Filled

PTFE Carbon Graphite Filled

Bronze Ti/EN 3.7035 AWC800 Red Polymer Monel K400 / EN 2.4360

7

Monel is a registered trademark of Special Metals Corporation.

Sealing Solutions for Rotating Equipment

4400Dual Concentric Gas SealAdvanced technology made simple in a gas seal design. The 4400 is a seal for all purposes and provides for an easy gas seal upgrade option. It is an ideal choice for upgrading under-performing, liquid lubricated seals to high performance, non-contacting operation.

Q Delivers low cost-of-ownership for a broad range of applications

Q Advanced technology that is easy to install and operate

Q Exclusive In-Gland Control System eliminates the need and expense of an external gas panel

Operating Conditions Materials Sizes 25 mm to 90 mm Faces CB, SSC (1.00" to 3.625")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, to 20 bar g (300 psig) FEPM, ChemLast

Temperature -55C to 300C Metals 1.4401 (316SS) (-67F to 570F)

Speed 25 m/s (5000 fpm) Springs 2.4819 (Alloy C-276)

Fits ISO-3069-C

Compact Design for Greater Equipment FitThe 4400 has been designed to fit popular process equipment including ANSI and API process pumps, top entry mixers, blowers, and compressors without equipment modification. Besides the obvious fitting and installation benefits, this also makes Chesterton gas-sealing technology available for a wider range of applications. Costly equipment modification is avoided.

Competitor A

Competitor B

Chesterton 4400

8


n.easy

Q Delivers low cost-of-ownership for a broad range of applications

d d h l h i

ast

S)

EQUIPMENTSe

alin

g So

lutio

ns fo

r Rot

atin

g Eq

uipm

ent


S10

S20

150

Operating Conditions MaterialsSizes 25 mm to 120 mm Faces CB, SSC, TC (1.00" to 4.75")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM, ChemLast to 31 bar g (450 psig), 17 bar g (250 psig) inboard differential

Temperature -55C to 300C (-67F to 570F) Metals 1.4401 (316SS)


Fits ISO-3069, ASME B73.1, B73.2

Operating Conditions MaterialsSizes 25 mm to 120 mm Faces CB, SSC, TC (1.00" to 4.75")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM, ChemLast to 31 bar g (450 psig)




Q High performance sealing

Q One optimized sealing concept for plant-wide standardization

Q Easy to maintain

Q Advanced sealing performance

Q One optimized sealing concept for plant-wide standardization

Q Easy to maintain

High Performance Dual Cassette SealA unique modular cassette that combines advanced seal technology with flexibility in maintenance and repair.

General Purpose Cartridge Single Seal Designed for baseline applications and for upgrading packed or component-sealed equipmentthis seal is a value leader in its class.

High Performance Single Cassette SealA unique modular cassette that combines advanced seal technology with flexibility in maintenance and repair.

MECHANICAL SEALS

Operating Conditions MaterialsSizes 25 mm to 120 mm Faces CB, SSC (1.00" to 4.75")




Fits ISO-3069, ASME B73.1, B73.2, ACS Approved

Q Simple upgrade to reduce plant maintenance costs

Q Reliable cartridge design that increases seal life

9

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t

10

280

Operating Conditions Materials Sizes 25 mm to 120 mm Faces CB, SSC, TC (1.00" to 4.75")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM, ChemLast to 40 bar g (600 psig), 17 bar g (250 psig) outboard



Fits ISO-3069, ASME B73.1, B73.2, ATEX Category I, Group 2 approved

*Extended motion capability available in 280M version.

Q High-reliability sealing

Q Maximum solids handling capability

Q Superior performance for demanding applications

Q Motion tolerant for mixer applications*

Heavy Duty Cartridge Dual SealA dual seal design for severe duty and greatest reliability in difficult applicationsincluding mixers and agitators*.

250

Operating Conditions Materials

Sizes 25 mm to 120 mm Faces CB, SSC (1.00" to 4.75")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM, ChemLast to 20 bar g (300 psig), 10 bar g (150 psig) outboard




Q Provides sealing security that conventional single seals cannot match

Q Reliable cartridge design that increases seal life

General Purpose Cartridge Dual Seal Designed for cost-effective upgrading from packing and under-performing single sealsthis seal is a value leader in its class, further increasing plant reliability.

Operating Conditions Materials Sizes 25 mm to 120 mm Faces CB, SSC, TC (1.00" to 4.75")

Pressure 711 mm or 28" Hg Vacuum Elastomers FKM, EPDM, FEPM, ChemLast to 40 bar g (600 psig) outboard




180

Q Maximum performance for demanding, high-torque applications

Q Reliable sealing of slurries

Q Suited for the broadest range of applications

Heavy Duty Single SealA compact chassis designed with ease of use and no modification. Advanced design features yielding next step single seal technology.

h l b l l


11

170

Operating Conditions Materials Sizes 25 mm to 228 mm Faces SSC, TC (1.00" to 9.00")


Temperature -55C to 300C (-67F to 570F) Metals 1.4401 (316SS)*


*Duplex stainless steel available as an option.

Slurry Cartridge Single SealEngineered to operate in harsh, heavy consistency slurry environments and to eliminate costly external seal flushes in the majority of applications.

170 ISO is an off-the-shelf product that fits directly to ISO-3069-H and ISO-3069-C seal chambers.

Q Runs longer in heavy abrasive slurries without the need for flush or quench water

Q Reliable design that deals with real life slurry pumping conditions

Q Easy to maintain

Intelli-Flow HT

Operating Conditions

Pressure 20 bar g (300 psig)

Temperature 125C (250F)

Temperature set point 80C (176F)

Connections 1/4 NPT

Materials 1.4401 (316SS)

Water SaverFeatures a thermally activated valve that automatically drains hot barrier fluid (only when necessary) to keep dual seals running cool and reliable. Valve opening temperature preset to work with S20 Seals.

Q Clean in place

Q Maintenance-free

Q Easy to install

Q 95% water savings compared to open barrier fluid supply

Q ClCleaeann inin pplalacece


Q Reduces flush water consumption

Q Increases equipment MTBR

Q Reduces shaft sleeve wear

SuperSet

Versions Applications 1730 SuperSet General service in slurries and clean fluids

1400R SuperSet Worn equipment, high-speed and high- temperature applications

1760 SuperSet Highly aggressive chemical environments

Enhanced Packing SetsChesterton performance packing sets, in combination with the patented SpiralTrac Environmental Controller, reduce flush water consumption and increase equipment service life.

Technical Data Materials Graphite coated PTFE yarn with break-in lubricants

Applications Black liquor pumps, chemical pumps, agitators

Pressure 17 bar g (250 psig) Temperature 260C (550F)

Speed 18 m/s (3600 fpm) pH 0 to 14

1760Chemical PackingStrong and dense PTFE fiber packing for chemical applications with the heat dissipating properties of graphite.

Q Dense braid ensures excellent leakage control and prevents solid embedment

Q Excellent chemical resistance

Q High shaft speed

Technical Data Materials White expanded PTFE yarn with a special filler

Applications Bleach pumps, chemical pumps, agitators

Pressure 20 bar g (300 psig) Temperature Min -40C (-40F), Max 260C (500F)

Speed 10 m/s (2000 fpm) pH 0 to 14 except for Fluorine (F2), ClF3 and related compounds, and molten alkali metals

1765White Chemical PackingNon-staining chemical packing ideally suited for bleach pumps and other rotary applications.

Q Non-staining

Q Superior chemical resistance

Q Low friction for improved speed capability

Q Longer packing life

12


PLANT-WIDE PACKING

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t

Technical Data Materials Expanded graphite PTFE filaments

Applications Wide range of applications


Speed 18 m/s (3600 fpm) pH 0 to 14 with exception of strong oxidizers in the 0 to 2 pH range

Applicable Standards and Approvals: BAM

1830Advanced Expanded Graphite PTFE PackingEconomical packing developed to meet strict specifications in pumps, agitators, mixers, and other rotating equipment.


Q Low friction, less heat generation and non- abrasiveness saves shafts and shaft sleeves

Q Easy installation and removal

Q Low leakage and long life

Excellent chemical resistance

Technical Data Materials Carbon reinforced expanded graphite PTFE

Applications Slurry pumps, mineral handling slurries, tailing pumps


Speed 18 m/s (3600 fpm) pH 0 to 14 with exception of strong oxidizers in the 0-2 pH range

1830-SSPSlurry PackingDesigned with a hybrid yarn combining advanced, expanded graphite PTFE yarn with carbon yarn reinforcement.

Q Developed to meet rigid demands of slurry sealing applications


Q Low friction, less heat generation, non-abrasive, saves shafts and shaft sleeves

Technical Data Materials Carbon fibre reinforced flexible graphite packing

Applications Process pumps, boiler feed pumps, block valves, refiners, agitators, mixers

Pressure 14 bar g (200 psig) rotating Temperature Min -240C (-400F)

applications Max 650C (1200F) steam

275 bar g (200 psig) valves Max 455C (850F) oxidizing atmosphere

Speed 20 m/s (4000 fpm) pH 0 to 14 except oleum, fuming nitric acid, and aqua regia

Applicable Standards and Approvals: BAM

1400RCarbon Reinforced Graphite PackingCombines the unique sealing properties of flexible graphite with the high strength of carbon fiber.

Q Flushless packing

Q High shaft speed capability

Q Passive molybdate corrosion inhibitor

Q For use in valves and pumps

13


1740Anti Extrusion AramidAn interbraid packing using Kevlar yarn and lubricated with PTFE and other lubricants to offer combined resistance to pressure, temperature, chemicals, and wear.

Technical Data Temperature Limit 260C (500F)

Pressure Limit 20 bar g (300 psig)

Shaft Speed 10 m/s (2000 fpm)

Chemical Resistance pH 4 to 11

Q Excellent extrusion resistance in abrasive applications

Q Non-staining, non-contaminating

Q Non-asbestos, multi-service packing

370Lubricated CarbonUnique carbon and graphite construction provides plant-wide utility off a single spool.

Technical Data Temperature Limit 315C (600F) steam



Chemical Resistance pH 0 to 14 except oleum, fuming nitric acid, aqua regia and fluorine

Q High-temperature

Q Fast break-in

Q Controls leakage with minimal friction

Q Reduced leakage and flushing

14





Chemical Resistance pH 1 to 13 Virtually unaffected by non-oxidizing acids, dilute bases, organic solvent Should not be used in concentrated or hot sulfuric (> 60%), or nitric acids (>10%), or strong bases

1727Multi-LonA synthetic packing designed to deliver performance equal to synthetics but with the pliability of asbestos.

Q High chemical resistance

Q Long-wearing

Q Non-staining

Q Non-hardening

Q Non-abrasive

Kevlar is a registered trademark of E.I du Ponte de Nemours and Company

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t


Pressure Limit



412-WMulti-ServiceA synthetic coating yarn with a specially formulated break-in lubricant to prevent failure at start-up and maintain continuous lubrication throughout the break-in process.

Q Pure white packing

Q Superior tensile strength

Q Holds twice the PTFE blocking agent of traditional fibers

CMS2000Flushless Packing SystemAn advanced stuffing box leakage control sealant made of high purity, reinforced fiber available in graphite, white, and food grade (FP) non-staining formulations.

Technical Data Temperature Limit 205C (400F), White 205C (400F), Black 205C (400F), FP

Pressure Limit

Shaft Speed 10 m/s (2000 fpm), White 8 m/s (1600 fpm), Black 6 m/s (1200 fpm), FP

Chemical Resistance pH 1 to 13, White not recommended for oxidizers, fluorine, chlorine trifluoride and related compounds, and molten alkali metals.

pH 4 to 13, Black not recommended for oxidizing agents.

pH 0 to 14, FP

Q Eliminates flush and reduces leakage to insignificant levels

Q Will not score shaft sleeves

Q Effective with worn, fretted sleeves

Q Never disassemble to repack again

InnerLubeSynthetic/PTFECombines Chestertons synthetic coating yarn and patented InnerLube construction. Offers increased lubrication at start-up and continues to disperse lubrication during operation, resulting in lower operating temperatures and reduced shaft and sleeve wear.

Technical Data Temperature Limit 260 (500F)

Pressure Limit



Q Increased lubrication

Q Lower operating temperatures

Q Non-staining, chemically resistant

15






1725AHigh Performance Food GradeA white, non-staining, ePTFE packing for use in food processing equipment including pumps, agitators, and mixers.

Q Meets USDA Requirements for minimal food contact

Q Meets FDA Requirements 21 CFR 178.3297, 21 CFR 177.2800, 21 CFR 177.1550

Q Completely inert to most materials

Q Handles high shaft speeds

16


Technical Data Temperature Limit Maximum 650C (1200F) steam service Minimum 240C (400F)

Pressure Limit 260 bar g (3800 psig)* valves 28 bar g (400 psig) pumps


Chemical Resistance pH 0 to 14 except oleum, fuming nitric acid, and aqua regia

GraphMaxStructurally Reinforced Graphite PackingDramatically improves the packings resistance to extrusion and blow out one of the limitations with traditional flexible graphite tape packings.

Q Exclusive construction for plant-wide use in pumps and valves

Q Maintains structural integrity for easy removal

Q Carbon fiber reinforced graphite strands provide maximum extrusion resistance and high- pressure capability

*For higher pressure limits consult Chesterton Engineering.

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t



Shaft Speed 10 m/s (2000 fpm) 15 m/s (3000 fpm) when used as a bottom anti-extrusion ring with 1400R

Chemical Resistance pH 0 to 14 except with strong oxidizers

477-1TCarbon/PTFEA tough, yet pliable, continuous filament carbon yarn packing impregnated throughout with PTFE to provide a non-contaminating, non-staining carbon yarn packing.

Q Non-contaminating, non-staining carbon yarn packing

Q Unique inorganic blocking agent stops gas/liquid penetration

Q Molybdenum-based corrosion inhibitor prevents stem pitting

17

SpiralTrac is a trademark of EnviroSeal Engineering Products Ltd.


1730General Service PackingDurable performance packing that is easy to install and will not score shafts.

Technical Data Materials Thermoset fibers with lubricants and blocking agents

Applications Water pumps, paper stock pumps, slurries, agitators, mixers


Speed 10 m/s (2000 fpm) pH 1 to 13

Q Easy and fast break in

Q Abrasion resistant, while non-scoring

Q Good chemical resistance

Q Good temperature resistance

d f t br k i

18


PLSPolymer Labyrinth SealUnitized, Non-Contacting Seal for Bearing Protection

Q High-performance, non-contact design, eliminates fretting caused by lip seals

Q Keeps lubrication in and seals out external contamination

Q Unitized design and durable non-sparking material provide easy, reliable installation

Q Available in a variety of configurations to meet plant-wide equipment needs

Q Same day shipment availability, minimizing downtime and associated costs

Q Standard sizes available for popular equipment, custom sizes available upon request

Q IP56 (third party certification) designed to be resistant to dust and water

PRODUCT PROFILES:

SPECIFICATIONS

Material(designation)

Size Rangemm (inch)

TemperatureC (F)

Speed*m/s (ft/min)

Eccentricitymm (inch)

Polymer Labyrinth Seal (EU) AWC800

25 to 152 (1 to 6)

-40 to 93(-40 to 200)

30.5 (6000)

0.75(0.030)

*Contact engineering for speeds beyond these limits

ATING EQUIPMENT

al

Q High-performance, non-conntact design,

The Chesterton patent-pending Polymer Labyrinth Seal (PLS) is a non-contact bearing seal designed to provide protection for pumps, motors, gearboxes, and other rotating equipment in splash applications. The unique design eliminates fretting caused by conventional lip seals and helps to increase bearing and gearbox life by extending the mean time between equipment repairs.

This unitized labyrinth seal uses Chestertons exclusive polymer to create a non-contacting 3-piece seal design that includes a rotor, a stator, and a built-in valve with no wearing parts. While in operation, centrifugal force and gravity ensure lubricant is contained within the labyrinth and flows back into the bearing housing, while outside contaminants are excluded and redirected back to atmosphere.

The unique design also incorporates a built-in valve that is activated by shaft rotation which engages during shutdown periods to create a positive seal during idle time, blocking ingress of external contaminants from entering the housing.

Chestertons Polymer Labyrinth Seal is manufactured from an advanced, durable, maintenance-friendly thermoset polymer compatible with common bearing and gear oils that offers a cost-effective alternative solution to other material options. Each seal is custom manufactured to the exact equipment size needed to maximize performance.

PLS1 PLS2 PLS3

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t

BEARING AND GEARBOX PROTECTION

30KBearing and Gearbox Protection Advanced sealing protection technology keeps the lubricant in and the dirt out for long-term sealing.

30K 30KW 30KSW 30KB 30KBW

SPECIFICATIONS

Performance depends on concurrent conditions including shaft hardness, shaft surface roughness, material, lubrication, temperature, and pressure.

PRODUCT PROFILES: Applicable standards: ISO3760/ISO3761

Material Size Range Temperature Speed Pressure Recommended use Mating (combination) mm (inch) C (F) m/s (ft/min) MPa (psi) surface (adapters/sealer rings) (Rockwell C)

AWC100 (PTFE) Excellent dry Polyimide Excellent low viscosity 45 No water and steam

AWC300 (PTFE) Excellent high viscosity 55 Molybdenum & glass Good dry and good in water

AWC400 (PTFE) Excellent in water 55 Carbon & graphite Good dry and low viscosity

Excellent dry Good in water and steam 45 No petroleum liquids

AWC510 (PTFE) Mineral (FDA listed)

20 to 600 -20 to 149 Up to 20 0,07 (0.787 to 24) (-30 to 300) (4000) (10)

Q New designs and materials proven to outperform conventional lip seals

Q High performance PTFE compounds offer advanced wear and abrasion resistance

Q Unique design provides lower friction and decreased shaft wear

Q High performance lip seals prevent contaminants from entering housing

33KSplit Bearing and Gearbox Protection Unitized split seal for bearing and gearbox protection.

SPECIFICATIONS

Material Size Range* Temperature Speed Pressure Recommended use Mating (adapters/sealer rings) mm (inch) C (F) m/s (ft/min) MPa (psi) surface (Rockwell C)

AWC800 Adapters (EU)

AWC100 (PTFE) 25 to 610 85 12,7 0,007 Excellent dry 45 Polyimide (1 to 24) (185) (2500) (1) Excellent low viscosity

AWC300 (PTFE) 25 to 610 85 12,7 0,007 Excellent high viscosity 55 Molybdenum & glass (1 to 24) (185) (2500) (1) Good dry and good in water

AWC400 (PTFE) 25 to 610 85 12,7 0,007 Excellent in water 55 Carbon & graphite (1 to 24) (185) (2500) (1) Good dry and low viscosity

AWC860 Adapters (EU)

AWC100 (PTFE) 25 to 457 121 12,7 0,07 Excellent dry 45 Polyimide (1 to 18) (250) (2500) (1) Excellent low viscosity

AWC300 (PTFE) 25 to 457 121 12,7 0,07 Excellent high viscosity 55 Molybdenum & glass (1 to 18) (250) (2500) (1) Good dry and good in water

AWC400 (PTFE) 25 to 457 121 12,7 0,07 Excellent in water 55 Carbon & graphite (1 to 18) (250) (2500) (1) Good dry and low viscosity

Performance depends on concurrent conditions including shaft hardness, shaft surface roughness, material, lubrication, temperature, and pressure.

Applicable standards: ISO3760/ISO3761

Q Split design eliminates the need for equipment disassembly

Q New design and materials proven to outperform conventional lip seals

Q Patented design combines high performance PTFE and polymer materials

Q Filled PTFE materials provide high wear and abrasion resistance

19


20


Material Size Range Temperature Pressure Speed (designation) mm (inch) C (F) MPa (psi) m/s (ft/min)

AWC700 (FKM) 6 to 152 (1/4 to 6) -30 to 200 (-20 to 400) 34,5 (5000) 1,5 (300)

AWC800 (EU) 6 to 1400 (1/4 to 55) -50 to 85 (-60 to 185) 103,5 (15000) 1 (200)

AWC830 (EU) 6 to 254 (1/4 to 10) -35 to 75 (-30 to 165) 52,0 (7500) 0,9 (185)

AWC850 (EU) 6 to 254 (1/4 to 10) -50 to 104 (-60 to 220) 103,5 (15000) 0,9 (185)

AWC860 (EU) 6 to 508 (1/4 to 20) -50 to 120 (-60 to 250) 103,5 (15000) 1,25 (250)

R22KN5Split Rotary Seal High performance, proven design for slow rotating applications exposed to large shaft run-out.

SPECIFICATIONS

R22KN5

PRODUCT PROFILE:

Q Flexible dynamic lip design for large shaft run-out compensation

Q Split configuration simplifies installation

Q Robust static lip design allows stack set arrangement and provides stability

Q Excellent abrasion-resistance, withstands demanding environments

Depending on the seal height and cross section, the split joint can be interlock arrow cut or butt cut.

* Please contact your Chesterton representative for larger sizes.

Material Size Range Temperature pH range (designation) mm (inch) C (F)

AWC520 (PTFE) 25 to 600 (1 to 24) Up to 200 (400) 0 to 14

AWC800 (EU) 25 to 1400 (1 to 55) Up to 100 (185) 4 to 10

14KRestriction Bushing A robust restriction bushing for rotating equipment.

Applicable standards: ISO 3069

R14K R14KRB2P R14KRBS R14KPF

SPECIFICATIONS

PRODUCT PROFILES:

Q Split design simplifies installation

Q Prevents particles from entering the stuffing box, extending packing and seal life

Q Tapered lip design controls fluid bypass

Q Designed for pumps and other rotating equipment such as agitators, mixers, and refiners

Seal

ing

Solu

tions

for R

otat

ing

Equi

pmen

t

21

AWC100 (PTFE) Polyimide

45

Dynamic 0,2 to 0,4 (8 to 16)

Static 0 ,4 to 0,8 (16 to 32)

Material* (combination)

(adapters/sealer rings)

Shaft Size** mm (inch)

Tempera-ture

C (F)

Speed m/s (ft/min)

Mating surface (Rock-well C)

Recommended use***

AWC300 (PTFE) Molybdenum &

glass 55

AWC400 (PTFE) Carbon & graphite 55

AWC510 Mineral (FDA listed)

25 to 200 (1 to 8)

-20 to 150 (-30 to 300)

Up to 5 (984)

Up tow 1 (150)

45

Excellent dry Good in water or steam Chocolate and syrups No petroleum liquids

Excellent in water or steam Good dry and low viscosity

Powders, asphalt, clay, slurries

Excellent dry Excellent low viscosity

(2 000 cp)

Good in dry, water, or steam

Pressure MPa (psi)

Surface finish m Ra

( inch)

30KCSeal for Viscous Fluids and Powders High performance, proven cartridge design for sealing powders and viscous fluids.

SPECIFICATIONSQ Outperforms conventional

packing, sealing viscosity fluids, and dry powders

Q Decreases downtime, easy-to-install, versatile cartridge design

Q Improves performance of compression packing, distinct PTFE materials

Q Custom-designed cartridges made to equipment dimensions

* Fluoroelastomer O-Rings provided (FDA listed with AWC510).

** Please contact your Chesterton representative for larger sizes.

*** Run-out to 0,15 mm (0,05").


ARC Concrete Coating Systems repair, rebuild, and protect all concrete structures from abrasive, corrosive, and chemically aggressive environments.

Q Provide long-term protection

Q Avoid costly structural rebuild

Q Reduce safety and environmental hazards

Q Simplify maintenance procedures

Q Cut downtime

ARC Metal Coating Systems repair, rebuild, and pro-tect all types of industrial process equipment and structures from abrasive, corrosive, and chemically aggressive environments.

Q Provide long-term protection

Q Extend equipment life

Q Cut downtime

Q Reduce the need for spare parts

Q Simplify maintenance procedures

ARC Coatings are in use every day, around the world, in numerous industries protecting process equipment against abrasive wear and metal loss under corrosive and abrasive flow conditions. Your pumps, fans, screws, agitators, and associated structures are valuable assets and protecting them while maintaining their reliable operation, is critical to your plants overall operational efficiency. Our 100% solids, low VOC coatings utilize advanced high molecular weight polymers. We then blend in ceramic and glass reinforcements to handle temperature up to 150C (350F) with pH ranges of .1-12.5 in mild to severe abrasive flow conditions.

ARC Metal Coating Systems (MCS) repair rebuild and protect all types of rotating equipment.

ARC Concrete Coating Systems (CCS) protect concrete equipment supports and base plates.

Asset Protection for Rotating and Associated Equipment

ARC EFFICIENCY AND PROTECTIVE COATINGS

ARC 855

Two-coat system Easily applied by brush or rollerMinimum thickness of 250 m (10 mils) per coat

Fans and housings Pump casings and impellers Screws

Product Characteristics Applications

EROSION RESISTANT COATINGS FOR METALS

Technical Data Dry Temperature (Min/Max) -29C (-20F) to 120C (250F)

Wet Temperature (Min/Max) -29C (-20F) to 65C (150F)

Tensile Adhesion - kg/cm2 - MPa (psi) 352.7 kg/cm2 (34.6 MPa) 5,020 psi

Salt Fog >10000 hrs

Available Sizes 1 kg, 4,5 kg, 15 l (25,6 kg)

ARC 858Abrasion Resistant Faring CoatingAn advanced, trowelable ceramic coating for the repair and resurfacing of all metal surfaces subjected to erosion, corrosion, and chemical attack.

Applied by trowel or spatulaNormally applied at a thickness of 1,5 mm (60 mils) or more

Pump casings and impellersFans and housingsPipe elbowsScrews




Tensile Adhesion - kg/cm2 - MPa (psi) 478.5 kg/cm2 (47 MPa) 6810 psi

Available Sizes 250 g, 940 ml, 1 kg, 4,5 kg, 15 l (24,8 kg)

Abrasion Resistant Surface CoatingAn advanced liquid, ceramic coating that is formulated to protect equipment from aggressive chemical attack, corrosion, and erosion.

Q Improves fluid flow efficiency

Q Extends equipment life

Q Cuts downtime

Q Reduces the need for spare parts

Q Rebuilds damaged equipment

Q Repairs and smoothes pitted surfaces

Q Able to be top coated with other ARC Coatings

23

ARC Effi

ciency & Protective Coatings

COATINGS FOR CORROSION, EROSION, AND CHEMICAL ATTACK FOR METALS

ARC HT-T, HT-SHT-TSpark-Testable, High-Temperature, Abrasion Control Compound. HT-SSpark-Testable, High-Temperature, Abrasion Control Liquid.An advanced ceramic coating that is formulated to protect equipment from corrosion and erosion in elevated temperature immersion of aqueous solutions.

HT-T Applied by trowel at a nominal thickness of 900 to 1150 m (35 to 45 mils) by trowel or plastic applicator

HT-S Easily applied by spray, brush, or roller Minimum thickness of 250 m (10 mils)

per coat

Hydrocyclones Pump volutes and impellersCondensate pumpsOffshore equipment


ARC S1/S1HBGeneral Purpose, Sprayable, Corrosion Protection Coating An advanced, liquid coating formulated to protect metal surfaces from corrosion and chemical attack.

ARC S1 Two-coat system Easily applied by spray, brush, or rollerMinimum thickness of 250 m (10 mils) per coat ARC S1HBHigh Build SystemEasily applied by spray, brush, or roller at a thickness of 1 to 2 mm (40 to 80 mils) per

coat. May be applied to concrete.

Cooling water systemsPipeline coatings Service water systems




Tensile Adhesion (metal) - kg/cm2 - MPa (psi) Greater than 140 - 14 (2000)

Salt Fog >10000 hrs

Available Sizes S1 - 4 l, 16 l

S1HB - 60 l, 600 l

Technical Data Dry Temperature HT-T (Min/Max) -29C (-20F) to 150C (302F)

Wet Temperature HT-T (Min/Max) -29C (-20F) to 110C (230F)

Dry Temperature HT-S (Min/Max) -29C (-20F) to 175C (347F)

Wet Temperature HT-S (Min/Max) -29C (-20F) to 150C (302F)

Tensile Adhesion - kg/cm2 - MPa (psi) Greater than 140 - 14 (2000)

Available Sizes 4 l, 16 l


Q Spark testable for pinhole- free verification

Q Reduces downtime

Q Cures in service

Q Low permeability provides long-term protection

Q Spark testable for pinhole-free verification

Q Sprayable viscosity for rapid installation

24

ARC EFFICIENCY AND PROTECTIVE COATINGSA

RC E

ffici

ency

& P

rote

ctiv

e Co

atin

gs

ARC S2Ceramic-Reinforced, Sprayable, Erosion-Resistant CoatingAn advanced, liquid ceramic reinforced coating for the protection of all metal surfaces subject to erosive, corrosive, and severe fluid flow conditions.

Two-coat system Easily applied by spray, brush, or rollerMinimum thickness of 250 m (10 mils) per coat

Fans and housings Cooling water systemsBase PlatesPump and valve assemblies Pipe coatings




Tensile Adhesion - kg/cm2 - MPa (psi) Greater than 140 - 14 (2000)

Salt Fog >20000 hrs

Available Sizes 1125 ml (cartridge), 2 kg, 12 kg, 15 l (22,9 kg)

ARC S4+100% Solids, Mineral-Reinforced, Epoxy Novolac, Acid Resistant CoatingAn advanced, liquid polymer coating formulated to protect equipment from extreme chemical attack and corrosion.

Two-coat system Easily applied by spray, brush, or rollerMinimum thickness of 375 m (15 mils) per coat

Fans and housingsAcid Transfer PumpBase PlatesReactor Agitators




Tensile Adhesion - kg/cm2 - MPa (psi) 330 kg/cm2 (32.4 MPa)4700 psi

Salt Fog >10000 hrs

Available Sizes 1125 ml (cartridge), 4 l, 16 l

Q Provides long-term protection

Q Low permeability for immersion conditions



Q Improves fluid flow efficiency




25

ARC Effi


ARC

Effi

cien

cy &

Pro

tect

ive

Coat

ings

ARC EFFICIENCY AND PROTECTIVE COATINGS

26

ARC CS2General Purpose, Thin Film, Novolac Blend, Epoxy CoatingThin film, advanced coatings that are formulated to protect concrete surfaces, CS2 is used for mild chemical attack.

Easily applied by notched squeegee, brush roller, or spray equipment Can be applied to damp concrete High gloss surfaceNon-Shrinking, no solvents, 100% solids Minimum thickness of 250 to 375 m (10 to 15 mils) per coat Colors: Grey

Base platesPump basesEqiupment bases




Compression Strength - kg/cm2 - MPa (psi) 680 - (9650)

Tensile Adhesion to Concrete - kg/cm2 - MPa (psi) >28 kg/cm2 (2.8 MPa) 400 psi

Available Sizes 161

Q Provides long term protection

Q Avoids costly structural rebuild

Q Reduces safety hazard caused by damaged concrete

ARC CS4Highly Chemically Resistant, 100% Novolac Resin, Epoxy Coating Thin film, advanced coatings that are formulated to protect concrete surfaces, CS4 is used for harsh chemical attack.

Easily applied by notched squeegee, brush roller, or spray equipment Can be applied to damp concrete High gloss surfaceNon-Shrinking, no solvents, 100% solids Minimum thickness of 250 to 375 m (10 to 15 mils) per coat Colors: Red

Base platesPump basesEqiupment bases


Q Provides long term protection

Q Avoids costly structural rebuild

Q Reduces safety hazard caused by damaged concrete



Compression Strength - kg/cm2 - MPa (psi) 970 - (13750)

Tensile Adhesion to Concrete - kg/cm2 - MPa (psi) >28 kg/cm2 (2.8 MPa) 400 psi

Available Sizes 161

THIN FILM COATINGS FOR CONCRETE

ARC Effi


ARC 890/897

High volumetric ceramic particle loadingApplied by trowel or plastic applicator tool 890 - Applied at a nominal thickness of

6 mm (1/4 in) or more897 - Applied at a nominal thickness of

3 mm (1/8 in) or more

Separators and cyclonesHoppers/chutes Coal pulverizersHydro pulpers Agitators


ABRASION RESISTANT COATINGS FOR METALS



Tensile Adhesion - kg/cm2 - MPa (psi) 238 kg/cm22 (23 MPa) 3390 psi

Available Sizes ARC 890: 2 kg, 6 kg, 15 l (34,6 kg) ARC 897: 1 kg, 6 kg, 15 l (33 kg)

890 Severe Slurry Wear Coating 897Moderate Slurry Wear CoatingAdvanced, ceramic-reinforced coating for the repair and protection of all metal surfaces subjected to moderate to severe abrasion.


Q Simplifies maintenance procedures


Q Improves safety by reducing hotwork

ARC I BX1 Impact and Wear Resistant Epoxy CoatingI BX1 is a urethane modified amine cured epoxy coating, highly reinforced with ceramic beads and flakes for resistance to severe sliding abrasion where impact forces or rapid vibration is a concern.

High volumetric ceramic particle loadingApplied by trowel or plastic applicator toolApplied at a nominal thickness of 6 mm (1/4 in) or more

Slurry pumpsPipes and pipe elbowsAgitatorsID/FD format




Tensile Adhesion - kg/cm2 - MPa (psi) 238 kg/cm2 (23 MPa) 3390 psi

Available Sizes 20 kg, 12 x 20 kg

Q High impact resistance


Q Simplifies maintenance procedures


Q Improves safety by reducing hotwork

Slurry pumps Pipe elbowsID/FD fansScrews

27

Performance and Productivity

State-of-the-art technologies, environmentally acceptable alternatives and strict quality processes contribute to fulfilling the customers expectations:

Q Increased productivity Q Lowered costs Q Reduced disposal and labor costs

In partnership with our worldwide distribution channels and factory-trained local specialists, Chesterton offers superior value, outstanding customer service, technical support, and delivery.

In these pages, you will find an overview of our products. For in-depth, individual product information, ask your local Chesterton Specialist.

Chesterton offers products and total system solutions for production process, facility, and maintenance needs.

Q Lubricants and greases Q Maintenance specialties

Q Cleaners and degreasers Q Metalworking fluids and

corrosion control

INDUSTRIAL LUBRICANTS AND MRO CHEMICALSIn

dust

rial

Lub

rica

nts

and

MRO

Che

mic

als

635 SXCHigh-performance, corrosion-inhibited grease with outstanding extreme pressure capabilities and excellent water washout resistance. 635 is synthetic based and offers superior high-temperature stability and resistance to steam and corrosive chemicals. Temperature limit -40C (-40F) to 240C (464F)

High load carrying capabilityHigh-temperature stabilitySuperior water washout resistanceExcellent corrosion protectionAvailable Container Sizes: 400 g, 18 kg, 55 kg, 180 kg

High water, temperature environment plants including: Pulp and paper mills Mining operations Steel, aluminum, and metal processing Marine Power Water and wastewater


Q Extends bearing life

Q Reduces downtimes

Q Increases productivity

Q Reduces grease consumption

610/610MT Plus/610HT Synthetic Lubricating FluidHigh-Temperature ServicePremium quality, 100% synthetic fluid that cleans as it lubricates over a wide temperature range of -25C to 270C (-13F to 518F).

Low evaporation Low carbonizing High detergencyself-cleaningE.P. additives increase load carrying ability Available Container Sizes: Aerosol (610 only), 3,8 l (610/610HT only), 20 l, 208 l

Equipment operating at elevated temperaturesRefrigerated areasSevere environments Oven and high-temperature chainsBearingsGearboxes


610 Primary Viscosities - ISO VG 68 - 610, ISO VG 220 - 610MT Plus, ISO VG 460+ - 610HT

NSF Registered636FG is a Food Grade version of 610MT Plus.

Q Reduces lubricant consumption

Q Reduced equipment cleaning and downtime

Q Reduces energy consumption

Q Increases equipment life

LIQUID LUBRICANTS

29

GREASES

615 HTG NLGI #1, HTG NLGI #2High-performance, corrosion-inhibited grease with outstanding extreme pressure capabilities and excellent water washout resistance. Temperature limit -40C (-40F) to 204C (400F)

Superior water resistanceExcellent corrosion protectionCompatible with most popular greasesExceptional shear resistanceAnti-oxidants prevent hardeningQBT Quiet Bearing TechnologyAvailable Container Sizes: 400 g, 18 kg, 55 kg, 181 kg

High water, temperature environment plants including: Pulp and paper mills Mining operations Steel, aluminum, and metal processing Marine Power Water and wastewater


NSF Registered

Q Extends bearing life

Q Reduces downtimes

Q Increases productivity

Q Reduces grease consumption

Industrial Lubricants and MRO

Chemicals

30

INDUSTRIAL LUBRICANTS AND MRO CHEMICALS

Lubri-Cup EMAutomatic single-point lubricator dispenses Chesterton grease to critical areas, eliminating over-and under-greasing.

Microprocessor-controlled, pulse delivery system Programmableoperates up to 12 monthsReplaceable service packsLubricates up to 8 bearingsup to 6 m (19 ft) awaySealed microprocessor

All Industries Including: Pulp and paper mills Mining operations Metal fabrication Steel mills Marine


Lubri-Cup EM Battery operatedLubri-Cup EM SP Machine synchronized and externally powered (DC power and AC power)

Q Reliable lubrication system

Q User-friendly

Q Cost-effective

Lubri-Cup OL 500 OilerAutomatic lubricator dispenses Chesterton oils to chains and other critical areas.

Microprocessor-controlled, pulse delivery system Programmableoperates up to 12 monthsRefillableLubricates up to 4 pointsSealed microprocessor

All Industries Including: Pulp and paper mills Saw mills Mining operations Steel mills Food, pharmaceutical, beverage industries General industry


Lubri-Cup 500cc oiler Battery operatedLubri-Cup 500cc oiler Machine synchronized and externally powered (DC power)Lubri-Cup 500cc oiler Machine synchronized and externally powered (AC power)

Versions Available

Q Environmentally-friendly, refillable container

Q User-friendly with a large LCD

Q Cost-effective

Lubri-Cup 250cc/VG MiniAutomatic single-point lubricator dispenses Chesterton grease to critical areas, eliminating over- and under-greasing.

A compact, convenient and sturdy design that is simple to install and operatePreset dispensing rates1, 3, 6, 9, 12 monthsRemote operationup to 0,3 m (1 ft)Electrochemical operation (Nitrogen gas)Sealed microprocessorAbility to turn on and off

All Industries Including: Mining and ore processing Power Pulp and paper Water and wastewater Steel and metal processing


Q Cost-effective

Q Transparent container for lubricant inspection

Q Reliable lubrication system

Lubri-Cup VG Mini 120cc

Lubri-Cup VG Mini 250cc

bri C pLubVG Lub

LUBRICANT DISPENSERS

Versions Available

Indu

stri

al L

ubri

cant

s an

d M

RO C

hem

ical

s

31

Q Lubricates for assembly and disassembly

Q Protects against corrosion

Q No need for torque tension recalculation

725Nickel Anti-Seize CompoundA high-performance, nickel based anti-seize. Combines the extreme pressure, corrosion resistant anti-seize abilities of colloidal nickel in an oil suspension that can withstand temperatures up to 1425C (2597F).

Ultra fine particlesGuards against galling and corrosionProtects against self-weldingWithstands extreme pressureUp to 1425C (2 597F)Available Container Sizes: 250 g, 500 g, Aerosol, 20 l

Covers all industriesMechanical assembly of: bolts, studs, flanges, press fits, valve stems, pump sleeves, screws, bushings, gaskets, bearings


785 & 785 FGParting LubricantThe new generation anti-seize compound contains a blend of ultrafine, inorganic solid lubricants in a non-carbonizing, ashless synthetic carrier. Withstands severe temperature and pressure conditions.

783ACR783 combines high performance industrial anti-seize performance with extreme corrosion protection and water washout resistance. 783 is ideal where the primary cause of bolt seizure is corrosion.

Eases disassembly up to 1204C (2200F)Fills in microscopic voidsNo toxic-heavy metalsFor extreme pressures up to 4730 kg/cm2 (67570 psi)Available Container Sizes: 785: 200 g, 250 g, 500 g, Aerosol, 24 kg 785FG: 200 g, 500 g

Covers all industriesBoltsScrewsStudsPipe threadsPress fitsPump sleevesNote: FG designates a Food Grade Product


Eases disassembly up to 900C (1652F)Fills in microscopic voidsNo toxic heavy metalsFor extreme pressure up to 8928 kg/cm2 (127000 psi)Safer than traditional metallic based anti-seizesAvailable Container Sizes: 250 g, 500 g, 24 kg

Covers all industriesBoltsScrewsStudsPipe threadsPress fitsPump sleeves


Meets MIL-A-907DNSF Registered772 Premium Anti-SeizeNuclear certifiable

NSF Registered


Q Protects against corrosion

Q No need for torque tension recalculation

Q Extreme corrosion protection and water washout resistance


THREAD LUBRICANTS/ANTI-SEIZE


Chemicals

32


706RustsolvoHigh-quality, fast acting, penetrating oil that reaches inaccessible areas and frees frozen nuts, bolts, and fittings without damaging the base metal.

723 & 723 FGSprasolvoFast acting, penetrating oil in a convenient, non-flammable propellant aerosol can. Excellent for hard to reach areas where rust, tar, grease, and dirt may prevent easy removal of nuts, bolts, and fittings.

Safe on plastic and painted surfacesContains no glycols, alcohols, DMSO (dimethyl sulfoxide) or chlorinated solventsPleasant odorCreeps into microscopic spacesAvailable Container Sizes: 1 l, 20 l, 208 l

Use on all corroded or seized threaded assemblies in the harshest industrial

environments


Pinpoint spraySafe on plastic and painted surfacesContains no acids or chlorinated solventsCreeps into microscopic spacesAvailable Container Sizes: Aerosol

Use on all corroded or seized threaded assemblies in the harshest industrial environmentsNote: FG designates a Food Grade Product


NSF Registered723FGConforms to FDA standard21CFR 172.884, 178.3620, 178.3650

NSF Registered

Q Single functionoptimizes performance

Q Fast acting

Q Safe to use

Q Single functionoptimizes performance

Q Fast acting

Q Safe to use

PENETRATING OILS

800

-240C (-400F) to 260C (500F)Seals tightly and opens easilyNon-aging, non-hardeningChemically resistantRequires fewer wrapsResists tearing and breakageWont clog lines

Liquids: Steam, water, salt water, air, fuels, refrigerants, acids, alkalis, all solventsGases: Hydrogen, ammonia, oxygen, propane, butane, nitrogenOther: Pneumatic and hydraulic fittings up to 690 bar (10 000 psi)


UL listed. Meets MIL-T-27730A. NSF Registered. DVGW approval No. 96.01e907. Acceptable for oxygen use

GoldEnd TapeHeavy-duty, high density, tear resistant, moldable, dry PTFE sealant tape for use on metal or plastic threads, pipes, or bolts.

Q Seals with 1 to 2 wrapsvirtually all chemicals

Q Adjustable by 90, no leakage

Q No waste

THREAD SEALING

Indu

stri

al L

ubri

cant

s an

d M

RO C

hem

ical

s

33

Moldable Polymer GasketingTwo-part, extrudable gasketing material allows for the creation of ultra-thin gaskets in any size, any shape. Never sticks to surfaces.

Resistance to oils, water, chemicals, and solventsNever sticks to surfacesFills voids and scratches, up to 6 mm (1/4 inch) deepRemains elasticTemperatures up to 260C (500F)Steam to 6,8 kg/cm2 (100 psi) and 170C (338F)

For sealing complex mechanical assembliesGear boxes, inspection covers, bearing housings, fittings, oil sumps and reservoirs, turbine casings, electrical boxes, vacuum systems


NSF Registered. Conforms to FDA standard 21CFR 175.300 and 177.2600. Caution: Not for use in contact with concentrated acids or hot concentrated caustics

Q Economical

Q Creates gaskets any size and shape

Q Ease of applicationspeeds up maintenance

860FLANGE SEALING

803Industrial and Marine Solvent IIA powerful, non-solvent based degreaser. Its advanced surfactant technology offers maximum efficiency in soil removal, especially applications where solvent use is required.

Cleaning dust, dirt, carbon black, petroleum based oilsPhosphate-free, no EDTA or toxic solventsNo irritating fumesCompatible with pressure washers and steam cleanersAvailable Container Sizes: 3,8 l, 20 l, 208 l, 1000 l

Covers all industries Cleaning production equipment, facilities, floors, walls and steel structures


NSF RegisteredCaution: Should not be used on aluminum or metals sensitive to high alkalinity. When using on painted surfaces, test small area for compatibility.

Q Cost-effectivehighly concentrateddilute with water to use

Q Strong, fast acting

Q Improves worker safety

Q Biodegradable

WATERBASED ALKALINE CLEANERS

360Phosphate-Free CleanerEspecially effective on animal fats and vegetable oils for the food industry. A versatile, industrial cleaner for environmentally sensitive areas.

Product Characteristics ApplicationsHighly effective on animal fat and vegetable oil High stable foamSolvent-freeAvailable Container Sizes: 20 l, 208 l, 1000 l

Food, pharmaceutical, and beverage industryMeat and poultry plantsBottling, canning, packaging machinesWastewater treatmentFloors, pump stationsSludge and fungi removalMarineDecks, hulls, bilgesIndustrialFloors, walls, tiles, concreteMachines

NSF RegisteredCaution: Do not use on aluminum




Q Environmentally friendlybiodegradable


Chemicals

34


820KPCBalances powerful performance with environmental compliance and worker safetythe ideal choice for process degreasing.

Product Characteristics ApplicationsEffective on: Oil depositsSoot and exhaust residueLubricants and metal working fluidsAnimal and vegetable fatsLow residueNo phosphates, harsh alkalis or EDTAAvailable Container Sizes: 20 l, 208 l, 1000 l

Ideal for manual, dip tank, and ultrasonic cleaningEffective for dip tank cleaning when heated to 82C (180F)


Q Strong, fast acting, yet moderate pH


Q Environmentally friendlybiodegradable

NSF Registered

218 HDPHeavy-duty, concentrated, virtually non-foaming, liquid alkaline degreaser. Designed with the environment in mind, yet it handles tough degreasing applications.

Excellent rinsabilityCorrosion inhibitedNo silicones, toxic solvents, phosphates, or EDTADye and fragrance-freeAvailable Container Sizes: 20 l, 208 l, 1000 l

Spray booth washersFloor scrubbersHigh pressure washersSteam cleaning equipmentCan be used in food plantsNote: Chestertons 218 HDP can be used

up to 82C (180F)


NSF Registered


Q Long lifetime in washing equipment

Q Improves worker safety no hazardous powder dust

Q Environmentally friendly biodegradable235

SSCPowerful cleaner removes oily and greasy deposits, waxes, loose paint, and heavy soils. Specially formulated for steam cleaning equipment.

Additives retard scale build-up and clogging of steam cleaning equipmentContains strong alkalis, emulsifiers, and surfactantsNo irritating fumesAvailable Container Sizes: 20 l, 208 l

GeneralConcreteMasonryEquipment (all types)


NSF RegisteredCaution: Should not be used on aluminum or metals sensitive to high alkalinity. When using on painted surfaces, test small area for compatibility.



Q Improves worker safety by removing slippery surfaces

Q Biodegradable

Indu

stri

al L

ubri

cant

s an

d M

RO C

hem

ical

s

35

274Industrial DegreaserA hard surface degreaser for industrial and marine environments.

NSF Registered

SOLVENT-BASED CLEANERS

Product Characteristics ApplicationsDissolves petroleum oil, grease, tar and other inorganic soilsLow odor, aromatic contentDoes not attack metal, most paints, and plasticsFast, penetrating actionAvailable Container Sizes: Aerosol, 3,8 l, 20 l, 208 l

Maintenance shopsDip tanksHard surfacesMachined partsRecirculating and agitated parts washers

Q Cost-effective

Q Low evaporation, long life-time, reduced consumption

Q Improve worker safety

Q High flash point

338Super Rust RemoverRemoves rust from ferrous metals, corrosion from aluminum, brightens copper, brass, stainless steel, and zincquickly and safely.

346Descaler and Chemical CleanerStrong, acid based, multi-use liquid, formulated with metal protecting inhibitor for a wide range of applications.

Removes metal oxide layerBrightens non-ferrous metalsLeaves metal paint readyRinses clean with waterShort term corrosion protection Available Container Sizes: 20 l, 208 l

GeneralMetal prefinishing of machined parts and metalworkMaintenanceRestores rusted inventories, nuts/boltsThreaded assemblies, internal corrosionShafts, cast housings


Dissolves rust and scale while protecting base surfaceConcentrated hydrochloric base and additivesAvailable Container Sizes: 20 l, 208 l

Steam boiler tubesCondenser water systemsWater circulating equipmentEtches concrete


WATER-BASED ACID CLEANERS

NSF RegisteredCaution: Not effective on grease, oil, and common soil. Not for use on aluminum, painted enamel, stainless steel, or decorative metals.


Q Inhibited to protect base metals

Q Biodegradable


Q Saves on labor, maintenance costs, and fuel consumption in heat transfer equipment

Q Inhibited to protect base metals

Q Biodegradable


Chemicals

36


740Heavy Duty Rust GuardThis long-term, corrosion preventative coating provides heavy-duty metal protection for all areas constantly exposed to humidity and corrosive fumeswithout critical surface preparation.

Self-healing, if scratchedTransparent brownAvailable Container Sizes: Aerosol, 3,8 l, 20 l, 208 l

Metal toolsParts in processParts in storagePumpsIndoor structural steelNote: Product can be easily removed with

Chestertons 276 Electronic Component Cleaner or 274 Industrial Degreaser


Conforms to MIL-C-16173D, Grade 1 and 4

Q Provides up to two years corrosion protection under sheltered outdoor conditions

Q Does not peel or flake

Q Excellent resistance to acid, alkali, and salt air fumes

775Moisture ShieldAn efficient, clear, moisture-displacing and anti-corrosion protective film that protects metal parts and equipment for months.

Transparent filmExcellent corrosion protectionPenetrates fine tolerancesHigh dielectric strengthProtects new metal from corrosionAvailable Container Sizes: Aerosol, 20 l, 208 l

Parts in process, transit, or storageElectrical systemsMarine industryDrying out of wet electrical partsNote: Where long term protection is desired use

Chestertons 740 Heavy Duty Rust Guard


Conforms to MIL-C-16173D corrosion preventative, Grade 3

Q Short term corrosion protection

Q Easily removable with Chestertons water-based or solvent-based cleaners

CORROSION CONTROL

Indu

stri

al L

ubri

cant

s an

d M

RO C

hem

ical

s

37

NSF Registered Products, A.W. Chesterton CompanyThis table provides general guidelines. For the most current listings and full descriptions of the category codes please visit www.NSF.org/usda/psnclistings.asp.

218 HDP 133943 A1235 SSC 133964 A4273 Electric Motor Cleaner 133975 K2273 Electric Motor Cleaner (aerosol) 133976 K2274 Industrial Degreaser 133955 C1, K1, K2274 Industrial Degreaser (aerosol) 133949 C1, K1, K2 276 Electronic Component Cleaner (aerosol) 133973 K2276 Electronic Component Cleaner (bulk) 133974 K2277 Metal Surface Degreaser (aerosol) 134008 C1, K1277 Metal Surface Degreaser (bulk) 134007 C1, K1279 PCS 134012 K2292 Precision Degreasing Solvent 134003 K1, K2, K3292 Precision Degreasing Solvent (aerosol) 134004 K1, K2, K3294 CSD 143867 C1, K1, K3 346 Descaler and Chemical Cleaner 133962 A33500 Valvelon 134013 P1360 Phosphate-Free Cleaner 133961 A1, A4390 Cutting Oil (aerosol) 134947 H2, P1395 Tapping Lubricant 133935 H2438 PTFE Coating (aerosol) 133950 H2601 Chain Drive Pin and Bushing 133927 H2 Lubricant (aerosol) 601 Chain Drive Pin and Bushing 133979 H2 Lubricant (bulk) 610 Synthetic Lubricating Fluid (aerosol) 133972 H2610 Synthetic Lubricating Fluid (bulk) 133971 H2615 High Temperature Grease 133940 H2615 HTG #1 133941 H2622 White Grease 133929 H1625 CXF Corrosion Resistant, 138414 H1 Extreme Pressure Food Grade Grease 629 High Temperature White Grease 133936 H1630 SXCF 142462 H1 630 SXCF Synthetic Extreme Pressure 138415 H1 Corrosion Resistant Food Grade Grease

636 FG SLF220 147202 H1 651 Detergent Lubricating Oil (aerosol) 133928 H2651 Detergent Lubricating Oil (bulk) 133946 H2652 Pneumatic Lubricant and Conditioner 133944 H2660 Silicone Lubricant (aerosol) 133970 H1660 Silicone Lubricant (bulk) 133932 H1662 FG Barrier Fluid 22 143837 H1 690 FG Lubricant (aerosol) 133933 H1690 FG Lubricant (bulk) 133969 H1706 Rustsolvo 133942 H2710 Anti-Seize Compound (bulk) 133958 H2715 Spraflex 133938 H2715 Spraflex (aerosol) 133934 H2715 Spraflex Gold 133930 H2715 Spraflex Gold (aerosol) 133931 H2723 FG Sprasolvo 134006 H1723 Sprasolvo 133939 H2725 Nickel Anti-Seize Compound 133959 H2730 Spragrip 133947 P1775 Moisture Shield (aerosol) 134015 H2785 FG Parting Lubricant 132237 H1785 Parting Lubricant 133960 H2787 Sliding Paste 133956 H2800 GoldEnd Tape 134016 H1, P1801 Industrial and Marine Solvent 133965 A1, A4, A8803 Industrial and Marine Solvent II 133966 A1860 Moldable Polymer Gasketing 134017 P1 (cartridge) 860 Moldable Polymer Gasketing 134018 P1 Curing Agent 900 GoldEnd Paste 133957 H2, P1KPC 820 133963 A1


Chemicals

Chemraz is a registered trademark of Greene, Tweed & Company.Elgiloy is a registered trademark of Elgiloy Specialty Metals.Grafoil is a registered trademark of GrafTech International Holdings Inc.Kevlar is a registered trademark of E.I du Ponte de Nemours and CompanyHastelloy is a registered trademark of Haynes International, Inc.Inconel is a registered trademark of Special Metals Corporation.Kalrez and Viton are registered trademarks of DuPont Performance Elastomers.Monel is a registered trademark of American Special Metals, Corporation.NSF is a registered trademark of NSF International.SpiralTrac is a trademark of EnviroSeal Engineering Products Ltd.

CHESTERTON GoldEnd, Multi-Lon, Rustsolvo, Spraflex, Spragrip, Sprasolvo, and Valvelon are registered trademarks of A.W. Chesterton Company.180, 280, 442C, ChemLast, GraphMax, InnerLube, Intelli-Flow, Lubri-Cup, QBT, Self-Centering Lock Ring, and SuperSet are trademarks of A.W. Chesterton Company.

All statements in this catalog pertaining to pressure, chemical compatibility, temperature, and service ratings are based on general service experience. Because of the wide variety of applications of our products, the broad range of products available, and the wide range of equipment conditions encountered, together with the unpredictable human factors involved in the installation of these products by the ultimate user, you should not follow recommendations shown without specific prior service experience or consultation with an authorized Chesterton representative.

Specific data on materials, construction methods, installation, and troubleshooting procedures are subject to change without notice.

Performance is closely associated with the process operating conditions and equipment conditions. Technical data reflects results of laboratory tests and is intended to indicate general characteristics only. A.W. CHESTERTON COMPANY DISCLAIMS ALL WARRANTIES EXPRESSED, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE. LIABILITY, IF ANY, IS LIMITED TO PRODUCT REPLACEMENT ONLY.

Global Solutions, Local Service

Since its founding in 1884, the A.W. Chesterton Company has successfully met the critical needs of its diverse customer base. Today, as always, customers count on Chesterton solutions to increase equipment reliability, optimize energy consumption, and provide local technical support and service wherever they are in the world.

Chestertons global capabilities include:

Q Servicing plants in over 100 countries

Q Global manufacturing operations

Q More than 500 Service Centers and Sales Offices worldwide

Q Over 1200 trained local Service Specialists and Technicians

Visit our website at www.chesterton.com

Distributed by:

A.W. Chesterton Company860 Salem StreetGroveland, MA 01834 USA

Telephone: 781-438-7000Fax: 978-469-6528 www.chesterton.com

Form No. EN23537Rotary Equipment Catalog EnglishPrinted in USA 10/14

2014 A.W. Chesterton Company

Registered trademark owned and licensed by A.W. Chesterton Company in USA and other countries, unless otherwise noted.

Chesterton ISO certificates available on www.chesterton.com/corporate/isoTechnical data reflects results of laboratory tests and is intended to indicate general characteristics only. A.W. Chesterton Company disclaims all warranties express, or implied, including warranties of merchantability and fitness for a particular purpose. Liability, if any, is limited to product replacement only. Any images contained herein are for general illustrative or aesthetic purposes only and are not intended to convey any instructional, safety, handling or usage information or advice respecting any product or equipment. Please refer to relevant Safety Data Sheets, Product Data Sheets, and/or Product Labels for safe use, storage, handling, and disposal of products, or consult with your local Chesterton sales representative.

Date post:	08-Jan-2016
Category:	Documents
Upload:	hufuents-1
View:	37 times
Download:	3 times

23537 Rotating Equipment Catalog

Documents