24” Marvel Low Profile All Refrigerator ADA HeightModel # MA24RA****

• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability

• Low profile, ADA height allows for universal installation applications, both commercial and residential

• MARVEL Intuit™ Integrated Controls ensure precise temperature management from 34°F to 42°F

• MaxStore™ roller-glide clear utility bin provides maximum volume to effectively store large, bulky or loose items

• Tall item storage: Half-width interior shelf and extra door storage allows for high-clearance vertical storage

• Pristine arctic white interior easily wipes clean and efficient white LED lighting illuminates interior for better viewing

• Close Door Assist System™ gently and automatically closes door

• Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry

• Audible and visual alarms signal when door is left ajar to protect food integrity and energy use

• Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements

• Height adjustment up to 1” with leveling legs

• 4” black adjustable toe kick

• 1-year warranty

Storage Capacity

Up to (118) 12-oz cans

Storage Configuration

(1) full-width and (1) half-width cantilevered, fully adjustable white steel-framed glass shelves

(1) fixed white steel-framed glass shelf

Product Dimensions

23⅞” W x 31⅛” H x 25⅝” D (including handle)

Finish/Door Options

BlackStainless Steel White Wood Overlay(Panel Ready)

Certified to meet ENERGY STAR® requirements

Ordering Details

Solid Stainless Steel Door, Right Hinge

MA24RAS2RS

Solid Stainless Steel Door, Left Hinge

MA24RAS2LS

Smooth White Door, Right Hinge MA24RAS2RWSmooth White Door, Left Hinge MA24RAS2LWSmooth Black Door, Right Hinge MA24RAS2RBSmooth Black Door, Left Hinge MA24RAS2LBSolid Panel Overlay Door, Integrated Right Hinge

MA24RAP3RP

Solid Panel Overlay Door, Integrated Left Hinge

MA24RAP3LP

No panel installation kit required.

Width 23 ⅞"

Interior Finish White

Capacity Up to 100 12-oz cans

Shelving System Cantilever

Shelf Fronts Stainless Steel

Other Storage MaxStore™ Utility Bin

Interior Lighting 2 White LED Pods

Toe Grill Finish Black

Hinge Classic Hinge

Handle Designer

Control Type Intuit™

Temperature Range 34° - 42° F

Lock NA

Electrical Requirements 120V / 60Hz / 15A

Length of Power Cord 5'

Product Dimensions 23 ⅞" W x 31 ⅛" H x 21 ½" D

Depth to Front of Door 23 23/32"

Depth to Handle 25 21/32"

Depth with door at 90° 46 13/32"

Shipping Weight 160 lbs

Finishes SS, B, W, O

Vacation / Sabbath Mode

Yes

Agency Approvals CSA

ENERGY STAR Certified

Finishes Key

SS = Stainless SteelB = BlackW = WhiteO = Overlay

"A"

"B"

"C"24" Rough-In Dimensions

"A" "B" "C"

24" (61 cm)

31 3/8" to 32 3/8"(79.7 to 82.2 cm)

24"(61 cm)

9

"F"

211⁄2"(54.6 cm)

* Depth dimension of rough-in opening may vary depend-ing on each individual installation. To recess entire door "F" dimension plus 1" (2.5 cm) for thickness of power cord plug is required.

** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.

# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appli-ance.

APPLIES TO THE FOLLOWING MARVEL MODELSML15BC MA24BCML15RA MA24BR

MA24RAML24BCML24BRML24RA

PRODUCT DATA

MODELELECTRICAL

REQUIREMENTS #PRODUCTWEIGHT

ML15**(G) or (S) 115V/60Hz/15A 105 lbs(47.7 kg)

ML15**(P) or (F) 115V/60Hz/15A 105 lbs(47.7 kg)

ML24**(G) or (S) 115V/60Hz/15A 140 lbs(63.6 kg)

ML24**(P) or (F) 115V/60Hz/15A 140 lbs(63.6 kg)

MA24**(G) or (S) 115V/60Hz/15A 140 lbs(63.6 kg)

MA24**(P) or (F) 115V/60Hz/15A 140 lbs((63.6 kg)

"D"

"E"

"H"

"J"

"G"

PRODUCT DIMENSIONS

Figure 8

! WARNING Floor mount Anti-tip Bracket must be installed for freestand-ing applications. Not required for built in applications.

“G” “H” “J”

25 21 ⁄32”(65.2 cm)

46 13⁄32”(117.9 cm)

25 11 ⁄16”(65.2 cm)

Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stabilityThe distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.

Front SideFront

ForcedAir Fan

Evaporator Plate

Return Air Intake

Front SideFront

ForcedAir Fan

Evaporator Plate

Return Air Intake

Cabinet Dimensions

"D" "E" "F"

23 7⁄8”(60.7 cm)

31 1 ⁄8” to 32 1 ⁄8”(79.7 to 82.2 cm)

23 23⁄32”(60.2 cm)

Overlay Panels

14

! CAUTION

15⁄32"(2.9 cm)

Figure 17Right Hand Hinged Door

24" (61 cm) wide appliance

Figure 18Right Hand Hinged Door

24" (61 cm) wide appliance

OVERLAY DOOR PANEL INSTALLATION

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep

4 places

Clearance for hinge

at top and bottom

2"(5.1 cm)

311⁄16"(9.4 cm)

11⁄2"(3.8 cm)typical

1⁄4"(6 mm)Deep

Hin

ge s

ide

of d

oor

Clearance for screw head, 4 places

3011⁄32"(77.1 cm)

111⁄16"(4.3 cm)

233⁄4"(60.3 cm)

31⁄8"(7.9 cm)

Top of door

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

Table C

Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

41⁄8"(10.5 cm)

1⁄4" (6 mm)radius ispermissible

This sideto door

31⁄8"(7.9 cm)

327⁄32"(9.8 cm)

13⁄16"(3 cm)

14"(35.6 cm)

47⁄8"(12.4 cm)

For comprehensive installation instructions, please visit www.marvelrefrigeration.com

18

OVERLAY DOOR PANEL INSTALLATION

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

MODELDOOR

DESCRIPTION DIM "A"ML15RAP*RP Solid, Right Hand

3011⁄32" (77.1 cm)

ML15RAP*LP Solid, Left HandML15BCF*RP Glass, Right HandML15BCF*LP Glass, Left HandML15BCP*RP Solid, Right HandML15BCP*LP Solid, Left HandML24RAP*RP Solid, Right HandML24RAP*LP Solid, Left HandML24BRF*RP Glass, Right HandML24BRF*LP Glass, Left HandML24BRP*RP Solid, Right HandML24BRP*LP Solid, Left Hand

MA24BRF*RP Glass, Right Handwith Lock

2723⁄32" (70.4 cm)MA24BRF*LP Glass, Left Hand

with Lock

MA24RAP*RP Solid, Right Handwith Lock

MA24RAP*LP Solid, Left Handwith Lock

Table C Table D

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

18

OVERLAY DOOR PANEL INSTALLATION

Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.

MODELDOOR

DESCRIPTION DIM "A"ML15RAP*RP Solid, Right Hand

3011⁄32" (77.1 cm)

ML15RAP*LP Solid, Left HandML15BCF*RP Glass, Right HandML15BCF*LP Glass, Left HandML15BCP*RP Solid, Right HandML15BCP*LP Solid, Left HandML24RAP*RP Solid, Right HandML24RAP*LP Solid, Left HandML24BRF*RP Glass, Right HandML24BRF*LP Glass, Left HandML24BRP*RP Solid, Right HandML24BRP*LP Solid, Left Hand

MA24BRF*RP Glass, Right Handwith Lock

2723⁄32" (70.4 cm)MA24BRF*LP Glass, Left Hand

with Lock

MA24RAP*RP Solid, Right Handwith Lock

MA24RAP*LP Solid, Left Handwith Lock

Table C Table D

Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole

15

Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 12. Set the gasket aside on a flat surface.

There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack along with the door lock, which is provided on certain models.

Figure 11

Press and hold down this tab on the wire connec-tor and pull the connector apart.

Figure 12

Figure 12a

Overlay panel flush with top

of door.

Holes in gasket

retainer.

Magnetic Gasket remove starting at a corner, grasp and pull away from the door.

OVERLAY DOOR PANEL INSTALLATION

Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" for the height dimension and door styles. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22.

Overlay panel to be centered on width of door.

15

Step 2: Remove the door gasketWith the door laying on a flat surface and starting at a corner of the door remove the magnetic door gasket from the interior side of the door, see Figure 12. Set the gasket aside on a flat surface.

There are 10 holes in the gasket retainer extrusions, (3 on each side and 2 at the top and bottom which are used to fasten the panel to the front of the door. The screws are provided in the literature pack along with the door lock, which is provided on certain models.

Figure 11

Press and hold down this tab on the wire connec-tor and pull the connector apart.

Figure 12

Figure 12a

Overlay panel flush with top

of door.

Holes in gasket

retainer.

Magnetic Gasket remove starting at a corner, grasp and pull away from the door.

OVERLAY DOOR PANEL INSTALLATION

Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" for the height dimension and door styles. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22.

Overlay panel to be centered on width of door.

19

Step 5: Assemble lock partsTwo (2) lock extensions are provided with the lock. Use the longer extension for 3⁄4" thick overlay panels and the shorter one for 5⁄8" thick overlay panels. Assemble the lock extension, cam stop washer, spring washer, and set screw to the lock as shown in Figure 21 and 23.

Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.

OVERLAY DOOR PANEL INSTALLATION

17⁄32"(13.7 mm)

31/2"(89 mm)

1⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.

Hin

ge s

ide

of d

oor

Counter bore lock holeon back side.

Step 6: Install lock camAttach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-cally when installing on the lock.

SECTION A-A SCALE 1 : 1

LOCK

NUT

BRASS EXTENSION

CAM

PHILLIPS SCREW

13/16 COUNTERBORE 7/16 DEEP

1/2 HOLE

3/4 INCHWOOD PANEL

SPRING WASHER

INNERDOOR

Figure 21

Figure 22a

#10 x 1/2"screw

Figure 22

17

Figure 18Left Hand Hinged Door

24" (61 cm) wide appliance

! CAUTION

OVERLAY DOOR PANEL INSTALLATION

Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.

Figure 20Right Hand Hinged Door

24" (61 cm) wide appliance

233⁄4"(60.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

13⁄16"(3 cm)

14"(35.6 cm)

1⁄4" (6 mm)radius ispermissible

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

"A"(See Table D)

2"(5.1 cm)

311⁄16"(9.4 cm)

41⁄8"(10.5 cm)

11⁄2"(3.8 cm)typical

1⁄4"(6 mm)Deep

111⁄16"(4.3 cm)

Hin

ge s

ide

of d

oor

Top of door

Clearance for hingeat top and bottom

Clearance for hingeat top and bottom

Clearance for screw head,

4 places

Figure 17Left Hand Hinged Door

24" (61 cm) wide appliance

233⁄4"(60.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep

4 places

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

13⁄16"(3 cm)

14"(35.6 cm)

1⁄4" (6 mm)radius ispermissible

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

"A"(See Table D)

2"(5.1 cm)

311⁄16"(9.4 cm)

41⁄8"(10.5 cm)

11⁄2"(3.8 cm)typical

1⁄4"(6 mm)Deep

111⁄16"(4.3 cm)

Hin

ge s

ide

of d

oor

Top of door

Clearance for screw head, 4 places

Figure 19Right Hand Hinged Door

24" (61 cm) wide appliance

This sidefacing interior

This sidefacing interior

15⁄32"(2.9 cm)

15⁄32"(2.9 cm)

17

Figure 18Left Hand Hinged Door

24" (61 cm) wide appliance

! CAUTION

OVERLAY DOOR PANEL INSTALLATION

Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.

Figure 20Right Hand Hinged Door

24" (61 cm) wide appliance

233⁄4"(60.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

13⁄16"(3 cm)

14"(35.6 cm)

1⁄4" (6 mm)radius ispermissible

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

"A"(See Table D)

2"(5.1 cm)

311⁄16"(9.4 cm)

41⁄8"(10.5 cm)

11⁄2"(3.8 cm)typical

1⁄4"(6 mm)Deep

111⁄16"(4.3 cm)

Hin

ge s

ide

of d

oor

Top of door

Clearance for hingeat top and bottom

Clearance for hingeat top and bottom

Clearance for screw head,

4 places

Figure 17Left Hand Hinged Door

24" (61 cm) wide appliance

233⁄4"(60.3 cm)

1" (2.5 cm) diameter x 1⁄4" (6 mm) deep

4 places

47⁄8"(12.4 cm)

327⁄32"(9.8 cm)

13⁄16"(3 cm)

14"(35.6 cm)

1⁄4" (6 mm)radius ispermissible

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

31⁄8"(7.9 cm)

13⁄4"(4.4 cm)

"A"(See Table D)

2"(5.1 cm)

311⁄16"(9.4 cm)

41⁄8"(10.5 cm)

11⁄2"(3.8 cm)typical

1⁄4"(6 mm)Deep

111⁄16"(4.3 cm)

Hin

ge s

ide

of d

oor

Top of door

Clearance for screw head, 4 places

Figure 19Right Hand Hinged Door

24" (61 cm) wide appliance

This sidefacing interior

This sidefacing interior

15⁄32"(2.9 cm)

15⁄32"(2.9 cm)