C:My documents\salesofficeandrew\Ford Falcon FG
Revision 1 – 17/08/10.
This is an Uncontrolled document.
270133.7
L.P. GAS CYLINDER
INSTALLATION INSTRUCTIONS
FORD FALCON UTILITY
FG SERIES
(TRAY & STYLE-SIDE)
This Automotive LP Gas cylinder must be installed in the vehicle in strict accordance with the latest
requirements of AS/NZS1425. Any modifications to the cylinder will render the warranty null and void.
GENERAL CYLINDER SPECIFICATIONS:
DIAMETERS : 330MM LENGTH: 813MM
CAPACITY : 62L (Water) L.P GAS CAPACITY : 50L
VALVE ORIENTATION : 30 degrees.
Modifications: Exhaust relocation required.
This cylinder is designed to be mounted underneath the vehicle in the current position of the exhaust
muffler.
1. Remove the exhaust muffler and tail pipe 2. If the vehicle is a style-side utility, remove
assembly to create space for the tank. the plastic tub.
C:My documents\salesofficeandrew\Ford Falcon FG
Revision 1 – 17/08/10.
This is an Uncontrolled document.
3. The cylinder is designed to be mounted 4. If the vehicle contains a tray back, use the
to the crossrails underneath the vehicle. cross rails shown for mounting.
Jack the cylinder into position, ensuring
the valves are facing outwards toward the
driver-side and the brackets line up with
the cross rails. Mark the hole locations and
drill 11mm dia holes through the cross rail.
5. If the vehicle is style-side (tub) use a 6. Bolt the cylinder into position making
hole saw to cut an opening in the top sure the cylinder and stoneguard is not
large enough to fit the backing plates and touching the vehicle at any point.
bolts into the cross rails.
6. Refit the exhaust in accordance with
AS/NZ 1425.