+ All Categories
Home > Documents > 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE...

290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE...

Date post: 25-May-2020
Category:
Upload: others
View: 9 times
Download: 0 times
Share this document with a friend
8
TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 WWW.TITANFCI.COM [email protected] 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control is a high quality manufacturer of Check Valves, Butterfly Valves, Pipeline Strainers, Pump Products, Fabricated Designs, and Pipeline accessories applicable to most industrial and commercial requirements. Titan Flow Control was established in the year 2000 by industry veterans with over 300 years of combined experience. We are located in the southeastern part of North Carolina and currently occupy over 70,000 ft 2 of office, warehouse, and manufacturing space. • “Y” STRAINERS • BASKET STRAINERS • DUPLEX STRAINERS • STRAINING ELEMENTS • FRP STRAINERS • TEMPORARY STRAINERS • FABRICATED STRAINERS • “T” STRAINERS • IN-LINE CHECK VALVES • SILENT CHECK VALVES • WAFER TYPE CHECK VALVES • GLOBE TYPE CHECK VALVES • SINGLE DISC CHECK VALVES • DUAL DISC CHECK VALVES • BALL VALVES • BUTTERFLY VALVES • SUCTION DIFFUSERS • TRI-FLOW VALVES • FOOT VALVES • AUTOMATIC STRAINERS • AND MUCH MORE... TELEPHONE: 910.735.0000 GO WITH THE FLOW! TITAN FLOW CONTROL, INC. YOUR PIPELINE TO THE FUTURE! PRODUCT GUIDE PG-0713 / Page 1
Transcript
Page 1: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TITAN

TITAN FLOW CONTROL

290 CORPORATE DRIVELUMBERTON, NC 28358

[email protected]

910.735.0000 TEL 910.738.3848 FAX

Titan Flow Control is a high quality manufacturer of Check

Valves, Butterfly Valves, Pipeline Strainers, Pump Products,

Fabricated Designs, and Pipeline accessories applicable to most

industrial and commercial requirements. Titan Flow Control

was established in the year 2000 by industry veterans with

over 300 years of combined experience. We are located in the

southeastern part of North Carolina and currently occupy over

70,000 ft2 of office, warehouse, and manufacturing space.

• “Y” STRAINERS

• BASKET STRAINERS

• DUPLEX STRAINERS

• STRAINING ELEMENTS

• FRP STRAINERS

• TEMPORARY STRAINERS

• FABRICATED STRAINERS

• “T” STRAINERS

• IN-LINE CHECK VALVES

• SILENT CHECK VALVES

• WAFER TYPE CHECK VALVES

• GLOBE TYPE CHECK VALVES

• SINGLE DISC CHECK VALVES

• DUAL DISC CHECK VALVES

• BALL VALVES

• BUTTERFLY VALVES

• SUCTION DIFFUSERS

• TRI-FLOW VALVES

• FOOT VALVES

• AUTOMATIC STRAINERS

• AND MUCH MORE...

TELEPHONE: 910.735.0000

GOWITHTHEFLOW!

TITAN FLOW CONTROL, INC.YOUR PIPELINE TO THE FUTURE!

PRODUCT GUIDE

PG-0713 / Page 1

Page 2: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TITAN FLOW CONTROL, INC.“Y” Type Strainers

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

Cast Iron

YS 12-CIClass 250ThreadedSizes: 1/4 ~ 3"

YS 58-CIClass 125FlangedSizes: 2 ~ 24"

Bronze & Brass

Carbon & Stainless Steel

YS 52-ABClass 250ThreadedSizes: 1/4 ~ 3"

YS 54-ABClass 150FlangedSizes: 2 ~ 12"

Need a strainer? . . .It's a no-brainer!

We routinely stock:

•Sizes1/4”through24” •PressureClasses125~2500 •Standardmaterials •Exoticmaterials •Allendconnections

If we don’t have it - we’ll help you find it!

YS 81-CSYS 81-SSClass 600ThreadedSizes: 1/4 ~ 3"

YS 82-CSYS 82-SSClass 600Socket WeldSizes: 1/4 ~ 3"

YS 63-CSYS 63-SSClass 300Butt WeldSizes: 1/2 ~ 12"

YS 65-CSYS 65-SSClass 600Butt WeldSizes: 1/2 ~ 12"

YS 83-CSYS 83-SSClass 1500ThreadedSizes: 1/2 ~ 3"

YS 84-CSYS 84-SSClass 1500Socket WeldSizes: 1/2 ~ 3"

YS 61-CSYS 61-SSClass 150FlangedSizes: 1/2 ~ 24"

YS 62-CSYS 62-SSClass 300FlangedSizes: 1/2 ~ 12"

YS 64-CSYS 64-SSClass 600FlangedSizes: 1/2 ~ 12"

YS 68-CSYS 68-SSClass 1500FlangedSizes: 2 ~ 8"

YS 69-CSYS 69-SSClass 1500Butt WeldSizes: 2 ~ 8"

YS 70-CSYS 70-SSClass 2500FlangedSizes: 2 ~ 8"

YS 71-CSYS 71-SSClass 2500Butt WeldSizes: 1 1/2 ~ 10"

Hig

h Pre

ssure

Models

Ava

ilable

Page

2 /

PG-0

713

YS 59-CIClass 250FlangedSizes: 2 ~ 12"

Available in

Additional

Materials

YS 56-BRYS 56-BZClass 125SolderSizes: 1/4 ~ 3"

YS 55-BRYS 55-BZClass 125ThreadedSizes: 1/4 ~ 3"

*BoltedCoverisstandardonsizes21/2" and3"andisoptionalonsize2".

Available in

WC6

Alloy 20316L

Lead Free!*(See note on the following page)

Page 3: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

Page

3 /

PG-0

713

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

TITAN FLOW CONTROL, INC.Basket Strainers (Simplex)

BS 25-CIClass 125ThreadedQuick-Open CoverSizes: 3/8 ~ 3"

BS 35-CSBS 35-SSClass 150/300ThreadedSizes: 3/8 ~ 3"

BS 55-CIClass 125FlangedClamp CoverSizes: 2 ~ 12"

BS 85-CSBS 85-SSClass 150FlangedSizes: 2 ~ 12"

Cast Iron

BS 25F-CIClass 125FlangedQuick-Open CoverSizes: 1 ~ 8"

BS 65-CIClass 125FlangedBolted CoverSizes: 2 ~ 12"

Carbon & Stainless Steel

Availa

ble w

ith

bolted a

nd

clam

ped c

over

Optional Cover Designs

MostBasketStrainermodelscanbeconstructedwithvariouscoverdesignsincludingbolted,clamped,andhinged.

BS 86-CSBS 86-SSClass 300FlangedSizes: 2 ~ 12"

BS 85-CSFull Rated - Clamped CoverSizes: 2 ~ 12"

BS 55-FRPClass 150FlangedSizes: 4 ~ 20"

Fiberglass & Aluminum Bronze

Availa

ble w

ith

bolted a

nd

clam

ped c

over

BS 25-CIQuick-Opening - Knob Type CoverSizes: 3/8 ~ 3"

BS 95-ABClass 150FlangedSizes: 2 ~ 12"

BS 35F-CSBS 35F-SSClass 150FlangedSizes: 1 ~ 8"

TheYS52-AB,YS54-AB, BS55-FRP, & BS95-AB, meet therequirements for Lead Free use in potablewater systems.Theleadcontentinthewettedsurfaces of these products is0.25% or less as determinedby a weighted average. Formoreinformationonleadfreerequirements, contact TitanFlowControl,Inc.

* Lead Free!*

Page 4: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TITAN FLOW CONTROL, INC.Duplex Strainers

Tri-Flow ValveTF 21-CIClass 125FlangedCast IronSizes: 2 ~ 20"

Suction DiffuserSD 22-CIClass 125FlangedCast IronSizes: 2 x 1 1/4 ~ 18 x 18"

Foot ValvesCheckValveModels

CV80-SSandCV20-BZcanalsobedesignedasFootValves

BV 25-SSMale x Female3000 WOGFull Port Sizes: 1/4 ~ 1 1/2"Reduced Port Size: 2”

BV 60-BZ600 WOGMale x FemaleFull Port DesignSizes: 1/4 ~ 2"

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

Page

4 /

PG-0

713

Blow-off ValvesBallValvescanbeprofessionallyinstalledasBlow-offValvesatourfactorybeforeshipping.

Foot ValveFV 50-DIClass 150FlangedDuctile IronSizes: 2 ~ 12"

Pump Products Ball Valves

Cast Iron

DS 595-CIClass 125FlangedCast IronSizes: 1 ~ 4"

DS 695-CIClass 125ThreadedCast IronSizes: 3/4 ~ 2 1/2"

Stainless & Carbon Steel

DS 596-CSDS 596-SSClass 150FlangedCarbon SteelStainless SteelSizes: 1 ~ 4"

DS 696-CSDS 696-CSClass 150ThreadedCarbon SteelStainless SteelSizes: 3/4 ~ 2 1/2"

Aluminum Bronze

DS 596-ABClass 150FlangedAluminum BronzeSizes: 1 ~ 4"

DS 696-ABClass 150ThreadedAluminum BronzeSizes: 3/4 ~ 2 1/2"

Page 5: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TITAN FLOW CONTROL, INC.Check Valves

Center Guided

CV 70-SSClass 150/300Flanged - Mini CheckStainless SteelSizes: 1/2 ~ 3"

Single & Dual Disc

CV 31-DIClass 150Wafer - Swing TypeDuctile IronSizes: 2 ~ 12"

CV 50-DIClass 150Flanged - Globe StyleDuctile IronSizes: 2 ~ 36"

CV 51-CS / CV 51-SSClass 150Flanged - Globe StyleCarbon & Stainless SteelSizes: 2 ~ 36"

CV 52-DICV 52-CS / CV 52-SSClass 300Flanged - Globe StyleDuctile Iron, Carbon & StainlessSizes: 2 ~ 36"

CV 90-DIClass 150/300Wafer Type - SilentDuctile IronSizes: 2 ~ 12"

CV 91-SSClass 150/300Wafer Type - SilentStainless SteelSizes: 2 ~ 12"

CV 20-BR400 WOGThreaded / In-LineBrassSizes: 1/4 ~ 2"

CV 80-SSClass 300Threaded / In-LineStainless SteelSizes: 3/8 ~ 3"

CV 12-CS / CV 12-SSClass 150Short Pattern - Wafer TypeCarbon & Stainless SteelSizes: 2 ~ 24"

CV 42-CS / CV 42-SSClass 150/300Wafer - Dual DiscCarbon & Stainless SteelSizes: 2 ~ 48"

CV 44-CS / CV 44-SSClass 300Wafer - Dual DiscCarbon & Stainless SteelSizes: 2 ~ 48"

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

Page

5 /

PG-0

713

Availa

ble w

ith

soft

and m

etal

seat

s

CV 32-CS / CV 32-SSClass 150Wafer - Swing TypeCarbon & Stainless SteelSizes: 2 ~ 12"

CV 41-DIClass 150Wafer - Dual DiscDuctile IronSizes: 2 ~ 48"

CV 46-CS / CV 46-SSCV 47-CS / CV 47-SSClass 600 & 900Wafer - Dual DiscCarbon & Stainless SteelSizes: 2 ~ 48"

Availa

ble w

ith

soft

and m

etal

seat

s

Availa

ble w

ith

soft

and m

etal

seat

s

Availa

ble w

ith

soft

and m

etal

seat

s

Availa

ble w

ith

soft

and m

etal

seat

s

Titan's Check Valves have eitherStainlessSteelorAluminumBronzetrimtomeettherequirementsforLead Free use in potable watersystems.The lead content of thewettedsurfacesofTitan'sironandsteelcheckvalvemodelsis0.25%orlessasdeterminedbyaweightedaverage.Formoreinformationonlead free requirements, contactTitanFlowControl,Inc.

*

Lead Free*

Trim on Titan Check Valves

Page 6: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

Cast & Ductile Iron

BF 75-CI200 PSIWafer TypeCast IronSizes: 2 ~ 48"

BF 76-DI200 PSILug TypeDuctile IronSizes: 2 ~ 48"

TITAN FLOW CONTROL, INC.Butterfly Valves & Actuation

Page

6 /

PG-0

713

Universal Mounting Flange

The cast-in actuator flange is universally designed in accordance with ISO 5211 standard dimensions. The mounting flange can accommodate all types of operators such as: 10-position handle kits, gear operators, electric actuators, and pneumatic actuators. For actuators, Titan FCI may provide both direct mount and bracket mount designs. Please contact Titan FCI about your specific automation requirements.

Butterfly Valve Features:• Seat is Phenolic Backed Cartridge• Sizes 2" through 12" in Stock• Valve Bodies are Epoxy Painted• Rated for 200 psi Bidirectional Service• Extended Neck provides 2" of Piping Clearance• Alignment Holes for easy Installation• Designed in Accordance with ASME/ANSI Class 125/150• When ordered with Aluminum Bronze discs, Titan Butterfly Valves meet the requirements for Lead Free use in potable water systems. The lead content in the wetted surfaces of Titan Butterfly Valves with AB discs is 0.25% or less as determined by a weighted average. For more information on lead free requirements, contact Titan Flow Control, Inc.

Mounting Options

ButterflyValvesareavailablewith10-position,actuator,gearbox,andchainwheelmounting.

StemExtensionsarealsoavailable.

Chain Wheel Gear Box

Electric Actuator Mounting

Pneumatic Actuator Mounting

Butterfly Valve ActuationTitan FCI offers a complete line of Pneumatic Actuators and Electric Actuators.

Actuator Accessories:

• Three and Four-Way Direct Mount Solenoid Valves• Pneumatic & Electro-Pneumatic Positioners• Limit Switches• Speed Controls• Manual Override• Lock Out Devices• 4-20 MA and 3-15 PSI

Pneumatic Actuatorwith Travel Indicator

Electric Actuatorfor Sizes 3" & Smaller

Electric Actuatorfor Sizes 4" & Larger

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

Lead Free *Butterfly Valve Discs Available!

Page 7: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TITAN FLOW CONTROL, INC.Fabricated Products

Fabricated Products

Fabricated “Y” Strainer

Titan FCI has the capability of designing and fabricating a variety of productsto your exact specifications . Our fabricated products include:

•“Y”Strainers •BasketStrainers•TemporaryStrainers•PlateStrainers •“T”Strainers

•DuplexStrainers •OrificePlates •SpectacleFlanges •SingleBlinds •RingSpacers

•SteamJacketedStrainers

•FiberglassReinforcedPlasticStrainers

•Andmuchmore....

Fabricated Basket Strainer Fabricated Duplex Strainer

Pleasecontactthefactor ydirect lyforanyspecialprojectsorappl icat ionsyoumayrequire .

Replacement Screens & Baskets

910.735.0000 TEL 910.738.3848 FAX [email protected] WWW.TITANFCI.COM

Page

7 /

PG-0

713

Titan FCI can manufacture straining elements for all types of strainers including:

• "Y" Strainers • "T" Strainers • Basket Strainers • Duplex Strainers

Titan FCI can manufacture straining elements in a wide variety of perforations, meshes, and materials (Type 304, Type 316, Alloy 20, Monel).

Perforated Screen Wire Mesh withPerforated Backing

Wire Mesh

Temporary Strainers

TitanFCIcanalsomanufactureTemporary/ConicalStrainers.

Temporary Strainer'Pilgrim's Hat' Type

Temporary Strainer'Witch's Hat' Type

We can also provide replacement screens and baskets for our competitor's strainers.

Just send us your prints, samples, or simply give us your requirements and let us design a straining element that is right for your application. In most cases, straining elements can be ordered by referencing Titan FCI's or any other manufacturers' strainer model number.

Page 8: 290 CORPORATE DRIVE 910.735.0000 TEL … … · TITAN TITAN FLOW CONTROL 290 CORPORATE DRIVE LUMBERTON, NC 28358 TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX Titan Flow Control

TitanFlowControl,Inc.manufacturesacompletelineofveryhighqualitypipelinestrainers,doubledisccheckvalves,globetypesilentcheckvalves,andsoftseatedbutterflyvalves.Ourproductofferingsincludebothahighqualityimportlineaswellasunitscraftedtomeetfulldomesticrequirementswheneverneeded.

Ourmanagementteamhasbeendesigningandmanufacturingindustrialstrainersforover30years.Wehavetheabilitytocustomdesignunitstoconformtoeventhemostcomplicatedpipingconfigurationsimaginable.Ourscreenfabricationshopcanquicklyprovidespecialscreensinawideselectionofbothperforatedandwiremeshmaterialsinsizesrangingfrom20through500mesh.Weofferproductsfabricatedfromnumerousalloysincludingbronze,ductileandcastiron,carbonsteel,stainlesssteel,monel,alloy20,nickelandhastelloy,aswellasmanyothers.

EveryTitanunitisfabricatedwithpremiumcomponentsfromcertifiedvendors.ThecomponentsthatgointomakingaTitanFCIvalvemustconformtoTitan’srigidstandards.Totestformeetingconformity,onarrival,everycomponentissubjectedtoandmustpassmultiple,rigorousqualityinspectionprocedures.Everycastingcarriesafoundryheatnumberforimmediateidentificationandforsubsequenttraceability.Allpartsareprecisionmachinedonthenewestandmostmodernnumericalcontrolmachinery-allmanufacturedinstrictadherencetointernationallyrecognizedstandardsandspecifications,includingANSI/ASME/API/NACEandISO.AllproductsmanufacturedbyTitanFCIare100%hydrostaticallytestedinaccordancewithapplicableANSI,API,MSSstandardsandcustomerspecifications.

TitanFCIisproudtohaveearnedoneofthehighestquality/priceratiosofanyreputablestrainer/valvecompanyintheworld.

YouwillfindthemostimpressivefactaboutaTitanFCIproductistheproductitself.Titanwillbemorethanpleasedtoprovideyouwithasampleofanyproductyourequest.

MartinGibbonsPresident

Titan Flow Control, Inc.A Letter from our President

TITAN

TITAN FLOW CONTROL

TitanFCI'snewmanufacturingfacility-rightoffofInterstate95,Exit17.

PG-0713 / Page 8

290 CORPORATE DRIVELUMBERTON, NC 28358

[email protected]

910.735.0000 TEL 910.738.3848 FAX

If you need help contacting a Titan Sales Representative,

call Titan FCI at (910)735-0000.

Your Titan Flow ControlSales Representative:


Recommended