Mongoose®
THE MONGOOSE ROADWAY AND AREA LIGHTING
LUMINAIRE OFFERS PARAMOUNT VERSATILITY OF
APPLICATIONS WITH ADVANCED OPTICAL SYSTEMS
AND AN AESTHETICALLY PLEASING DESIGN. THE
ABILITY TO CONFIGURE THE MONGOOSE OPTICS,TILT, AND MOUNTING METHOD TO MEET SPECIFIC
APPLICATIONS ENABLES IT TO BE USED IN DIVERSE
APPLICATIONS RANGING FROM INTERSTATES TO
PARKING LOTS.
30 HOLOPHANE® | DESIGNER SERIES | Mongoose
HOLOPHANE®
Features and Benefits
O Up to 14 optical configurations provides
a vast range of lighting distributions
O Variable tilts between 0° and 45° on four
mounting options offers unparalleled solutions
for a multitude of lighting requirements
O Full cutoff through semi-cutoff distributions
providing optical flexibility where required
O Superior product features increases safety,
and provides economical and energy efficiency
HOLOPHANE® | DESIGNER SERIES | Mongoose 31
| OUTDOOR LIGHTING
Drop Glass Optics(with tenon mount)
Flat Glass Optics(2 units in a line)
Flat Glass Optics(Architectural Arm)
Typical Applications
O Municipalities
O Commercial Developments
O Residential Streets
O Parking Lots
O Airports
O Institutional
O Power Plants
O Highways
O Railways
O Correctional Facilities
Flat Glass Optics(with horizontal arm mount)
HOLOPHANE®
Attractive Optical Design Optimum Energy Efficiency
Energy Efficient architectural Appeal
The Mongoose luminaire offers advanced optical light control in an aestheticallypleasing design to complement any landscape architecture. It has been designedto offer 14 advanced optical systems ensuring superior performance that offersenergy efficiency, ease of maintenance and safety.
O Architectural AppearanceThe Mongoose luminaire was designed to provide an attractive alternative totraditional shoebox and cobrahead luminaires. The 21st century design allowsoptimum performance in a sleek design. Whether illuminating an autodealership, a parking lot, or a parkway, the Mongoose luminaire can be built toprovide the look you need and the illumination that you require!
O Energy Efficiency and EconomicsState of the art materials, coupled with 14 advanced optical systems, ensureoptimal performance for any application. Large area lighting, forward throw,flood lighting, roadway, offset, sports, and high mast lighting are optimizedwith Mongoose luminaires. Spacing of up to ten times the mounting height arepossible with the advanced optical systems. Fewer poles, less energyconsumption, and improved light distribution result in lower life-cycle cost.First cost and maintenance costs are reduced as fewer vehicles and personnelare required and lane closures are minimized.
O SafetyThe Mongoose luminaire offers an unparalleled variety of optical choices tomaximize safe driving at the lowest cost. Increased illumination on verticalsurfaces enhances visibility. Because poles can be set back up to 50 feet, thevisual field is maximized and allows recognition of hazards earlier than typicalroadway applications. The larger “clear zone” increases driver andmaintenance personnel safety. Pole top mounting of luminaire reduces glareassociated with traditional systems and pole knockdowns.
Advanced Optical Light Control
The Mongoose luminaire provides the bestcombination of vertical and horizontal illumination.Unparalleled uniformity eliminates hot spots on theroad. At the heart of the Mongoose luminaire is arevolutionary optical system, which allows for longspacings, wide roadway coverage, and low glare.
The unique design of the Mongoose forward throwreflector allows significantly enhanced performanceover traditional designs. The vertical lamp orientationminimizes hot spots while allowing maximum spacing.A revolutionary stepped reflector virtually eliminates
spill light behind thepole.
A generous opticalchamber in theMongoose luminairepermits the use ofvertical lamporientation,maximizing spacingwith optimumuniformity. Theunique square
pattern ensures that light travels between poles, whichreduces dark areas common to horizontal lamp units.
Segmented or parabolic hydro-formed optical systemsput the light where it is desired. With the extensiveoptical choices available, spill light is eliminated anduniformity in the target area is maximized. For lightpollution concerns, the flat glass and clear drop glassoptions eliminate uplight while providing maximumspacings.
| OUTDOOR LIGHTING
Optics Low and High Tilt
Ease of Maintenance
Mechanical Features
The Mongoose luminaire is available in a choice of twotilts – “low tilt” or “high tilt” for flexibility in specifyingthe luminaire based upon your particular application requirements.
Low Tilt (0° to 18°)
Low tilt Mongoose luminaires can be tilted between 0° and 18°and provide full cutoff, cutoff, and semi-cutoff distributions.For areas with night skies concerns, low tilt provides a solutionto light trespass issues. Mongoose luminaires with low tilt aremost frequently used in areas that are typically lit by cobraheador shoebox fixtures.
• May be set back up to 20 feet from road for optimal performance• Two or four lane coverage• Choice of three refractors – flat glass, clear drop glass, and
prismatic refractor • Optics for full cutoff, cutoff, and semi-cutoff distributions • 100 – 400W HPS and MH• Narrow and wide distribution patterns
High Tilt (27° to 45°)
High tilt Mongoose luminaires can be tilted between 27° and45°. Mongoose luminaires with high tilt are offset luminairesthat are typically mounted up to 1.5 mounting heights off theroadway. In addition, offset luminaires are also extensively usedin institutional, correctional, and industrial applications forperimeter and security lighting.
• May be set back 15 to 50 feet from roadway for optimalperformance
• Up to six lane coverage• Choice of two refractors - clear drop glass and prismatic refractor • 100 – 400W HPS and MH• Narrow and wide distribution patterns
Maintenance is simplified as all systemsare interchangeable. A commonelectrical assembly allows electricalcomponents to be replaced in less thanone minute without the use of tools.Installation and maintenance are alsoeased due to the fixture mounting on topof the pole opposed to an arm extendedover the roadway.
HOLOPHANE® | DESIGNER SERIES | Mongoose 33
Applications
IDEALLY SUITABLE FOR MUNICIPAL BOULEVARDS
IN A MODERN URBAN SETTING, THE LIGHTING
SYSTEM PERFORMS WELL AT OVERALL HEIGHTS
BETWEEN 20 AND 30 FEET. FURTHERMORE,EFFECTIVELY ILLUMINATE AND ENHANCE
COMMERCIAL PLAZAS, CAMPUSES, WATERFRONTS
AND OUTDOOR RETAIL CENTERS.
34 HOLOPHANE® | DESIGNER SERIES | Mongoose
HOLOPHANE®
HOLOPHANE® | DESIGNER SERIES | Mongoose 35
| OUTDOOR LIGHTING
Heavy Duty Die Cast Ballast provides ease of maintenance and energy savings
36 HOLOPHANE® | DESIGNER SERIES | Mongoose
HOLOPHANE®
A Variety of Glass and Tilt Options
Heavy Duty Die Cast Ballast
A Variety of Mounting Options
Quick Disconnect
Variety of Pole Choices
A Variety of Glass and Tilt Options offers 14 optical light distributions
A Variety of Mounting Options offers versatile design choices
Quick Disconnectprovides ease ofmaintenance
Variety of Pole Choicesfit any site architecture
HOLOPHANE® | DESIGNER SERIES | Mongoose 37
| OUTDOOR LIGHTING
Narrow Roadway Wide Roadway Forward Throw Square Offset-Narrow Offset-Medium Offset-Wide
Watts/Lamp
FlatGlassLNF
ClearDropLNC
PrismaticRefractor
LNR
FlatGlassLWF
ClearDropLWC
PrismaticRefractor
LWR
FlatGlassLFF
ClearDropLFC
FlatGlassLSF
ClearDropLSC
ClearDropHNC
PrismaticRefractor
HNR
ClearDropHDC
PrismaticRefractor
HDR
ClearDropHWC
PrismaticRefractor
HWR
100 HPS 49293I, M, FCO
51853II, M, CO
49498I, M, CO
49416III, M, FCO
51851III, M, CO
49499II, M, CO
150 HPS 49274I, M, FCO
51850II, M, CO
49506I, M, CO
49419III, M, FCO
51854III, M, CO
494513II, M, CO
51431IV, VS, FCO
51444IV, S, NCO
51151IV, M, SCO
49739IV, L, NCO
49738IV, L, NCO
101210III, M, NCO
101290III, L, NCO
49922IV, L, NCO
49923IV, L, NCO
175 MH 49488I, M, FCO
51876I, M, CO
49418I, M, CO
49449II, M, FCO
51875II, M, CO
51449IV, VS, FCO
51443IV, M, NCO
51048III, S, FCO
51039IV, S,NCO
49747III, M, NCO
49745IV, L, NCO
101292II, M, NCO
101291III, M, NCO
49983IV, L, NCO
49984IV, L, NCO
250 HPS 49260II, M, FCO
51562II, M, CO
49427II, M, CO
49395III, M, FCO
51844III, M, CO
49524II, M, CO
51437IV, VS, FCO
51440IV, S, SCO
51135IV, M, SCO
49736III, M, NCO
49734IV, M, NCO
50379III, M, NCO
50380III, M, NCO
49986IV, M, NCO
49985III, M, NCO
250 MH 49296I, M, FCO
51868II, M, CO
49420III, M, FCO
51849III, M, CO
51452IV, VS, FCO
51442IV, S, NCO
51046III, S, FCO
51041IV, VS, SCO
49757IV, L, NCO
49758IV, L, NCO
101299III, M, NCO
101298III, M, NCO
50000IV, L, NCO
49999IV, L, NCO
400 HPS 49257II, M, FCO
51561II, M, CO
49482II, M, CO
49396III, M, FCO
51843III, M, CO
49484II, M, CO
51419IV, VS, FCO
51417IV, S, SCO
51132IV, M, SCO
49730IV, M, NCO
49732III, M, NCO
50347III, M, NCO
50346III, M, NCO
49899IV, M, NCO
49900IV, L, NCO
400 MH 50281II, S, FCO
52307II, M, CO
50278II, M, CO
50276II, M, FCO
52306II, M, CO
50279II, M, CO
51031IV, VS, NCO
49291II, M, NCO
49530II, M, NCO
101300III, L, NCO
101302III, M, NCO
49982III, M, NCO
49981III, M, NCO
400 MHCompact
51448IV, VS, FCO
51441IV, S, NCO
51055III, S, FCO
House Side
Street Side
5
2.5
1.51.5
1
0.5
0.25 House Side
Street Side5
2.5
1.5
1
0.5
0.25 House Side
Street Side
5
2.5
1.5
1
0.5
0.25
Forward Throw Narrow Throw Wide Distribution
1 unit
2 units @ 180°
3 units @ 120°
3 Units @ 90°
3 units in a line 4 units in a line
4 @ 90°
Pole Configurations and Material InformationHolophane offers a full selection of pole shapes, sizes and styles to satisfy any arrangement ormix required to complete the execution of a design. With choices in steel, aluminum, round,square, decorative bases and pole top shapes, and complementary mounting arms thattransition the pole shape to the luminaire, the designer is enabled to balance the luminaire/polecombination with the architecture of the surrounding area. For complete pole informationand catalog structure, please visit our website www.holophane.com or refer to theHolophane Outdoor Buyers Guide.
Ordering InformationPoles
Distributions
38 HOLOPHANE® | DESIGNER SERIES | Mongoose
HOLOPHANE®
387mm(15.23”)
932mm (36.8”)
387mm(15.23”)
424mm(16.7”)
Maximum Weight: 25 kg. (55 lbs.)
Maximum EPA: 0.8
Luminaire shall be Holophane Mongoose®, Catalog No. G _________.It shall consist of mounting, optical, support and electrical systems aswell as finish cover and will provide certain performancecharacteristics as follows:
Mechanical Construction:
The housing, door and fitter shall be die cast aluminum. They shallundergo a six stage cleaning and pretreatment process and over-coated with an electrostatically applied 2 to 4 mil coat of TGICpolyester powder paint cured at 425°F. The finish shall withstand a160 inch-pound impact measured with a standard Gardner impacttester. It shall have passed a 1000 hour salt spray test as specified byASTM B-117. It shall exhibit no cracking or loss of adhesion from a180° bend over a 1/8” mandrel diameter per ASTM D522. All externalhardware shall be corrosion resistant. Housing access shall not requiretools. The fitter shall be built in and accommodate a standard 2 inchtenon or arm. Units can be tilted between 0° and 18° or 27° and 45°.Electrical connection shall be inside the fitter assembly and not requirefixture entry. A terminal block located inside the fitter shall beprovided if specified.
Quick Disconnect Electrical Assembly:The fixture door shall contain all ballast components and be hingedfor fast tool-free removal and replacement. Complete replacementshall take less than 60 seconds.
Ballast:Shall be copper wound, high power factor type as specified. It shallreliably start the lamp in ambient temperatures to minus 40°F. Theplug-in HPS starter shall be totally encapsulated with a material thatelectrically and thermally insulates all components from lamp andballast heat. A protected starter, if specified, shall sense an inoperativelamp and shut down automatically to prevent continuous pulsing andthermal damage to itself and the ballast secondary winding. TheMongoose luminaire is UL/CUL listed for 40°C ambient. (347V, 400WHPS restricted to 25°C ambient.)
Optical and Socket Assembly: The reflector shall consist of high purity (#3002 alloy) aluminum ofminimum 0.08” thick sheet. Flat lens shall be 1/8” fully temperedglass. Pressed prismatic or clear drop lens shall be manufactured ofborosilicate glass. The reflector and lens optical assembly shall bedesigned to provide the IESNA pattern specified. The socket shall bepulse rated, nickel-plated and lamp grip porcelain enclosed. It shallprevent undue lamp vibration and withdrawal.
ANSI Lamp Label:A self-adhesive label shall be provided which identifies the lamp typeand size. It shall meet ANSI C-136 standards.
Warranty:The electrical assembly shall be fully warranted for a period of 6 yearsand the housing for a period of 2 years from the date of manufacture.
Dimensional Details
Performance Specifications
HOLOPHANE® | DESIGNER SERIES | Mongoose 39
| OUTDOOR LIGHTING
Preferred Selections:
Most Frequently Ordered Catalog Numbers
G1
LUMINAIRE
G
400PM2
WATTAGE
175PM250PM400PM
MA3
VOLTAGE
MA
L4
TILT RANGE
L
WF5
OPTICS
FCWF
A6
MOUNTING
AH
G7
FINISH
GK
R8
OPTIONS
PR
Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected)
STEP 1: LUMINAIRE
G Mongoose
STEP 2: SOURCE AND WATTAGE
HIGH PRESSURE SODIUMMogul Base15AHP 150W/55V HPS100HP 100W HPS200HP 200W HPS250HP 250W HPS400HP 400W HPSEnergy Saving25LHP 250W HPS40LHP 400W HPS
METAL HALIDEMogul Base175MH 1 175W MH250MH 1 250W MH400MH 1 400W MHEnergy Saving40LMH 1 400W HPS
PULSE START METAL HALIDE175PM 2 175W MH250PM 2 250W MH400PM 2 400W MHEnergy Saving40LPM 2 400W HPS1 Not available for shipment in US after
Dec. 31, 2008, due to EISA legislation2 Meets US Federal EISA legislation
STEP 3: VOLTAGE
08 1 208V, Isolated secondary12 120V20 208V24 240V27 277V34 347V40 1 240V, Isolated secondary48 480VMT Multivolt, 120-277VVT Varitap, 120-347VMultivolt 120, 208, 240 & 277VMA Factory wired for 120V onlyMB Factory wired for 208V onlyMC Factory wired for 240V onlyMD Factory wired for 277V only1 Must be handled through TSG
STEP 4: TILT RANGE
L Low tilt, 0 - 18°H High tilt, 27 - 45°
STEP 5: OPTICS
Medium RoadwayDC 2 Clear drop glassDR 2 Prismatic refractorForward ThrowFC 1,4 Clear drop glassFF 1,4 Flat glassNarrow RoadwayNC 3 Clear drop glassNF 1 Flat glass NR Prismatic refractorFloodND 2 Narrow WD 2 WideSquare DistributionSC 1 Clear drop glassSF 1,4 Flat glass for 175,
250 and 400W MHWide RoadwayWC Clear drop glass3
WF 1 Flat glassWR Prismatic refractor1 Available with “L” tilt range only2 Available with “H” tilt range only3 “L” Comes with shallow glass optic4 400MH must use compact lamp
STEP 6: MOUNTING
A Architectural armH Horizontal armT Yoke mountV Vertical tenon
STEP 7: FINISH
K BlackG GrayN GreenW WhiteZ Bronze
*Colors are just a representation. Customcolors are available upon request
STEP 8: OPTIONS
Factory Installed.See page 63 for a complete list of options and product availability
STEP 8: ACCESSORIES
Ships Separately.See page 63 for a complete list of accessories and productavailability
62 HOLOPHANE® | DESIGNER SERIES | Section?
HOLOPHANE®
GlasWerks IISeries
MetroVueSeries
PechinaSeries
Luminaire GB, GE, GM, GN,GP, GR, GS, GY
EA, EY, EYPP
Shapes The product has multiple contemporary shapes available for a variety of architecturaldesign options
Housing Heavy duty, cast aluminum ballast housing.
Electrical UL/CUL labeled for wet locations, suitable for ambient temperatures up to 40ºC. IP66Rated
Optics A variety of optics choices provide a wide range of lighting distributions
Mounting A variety of pole and arm mountings are available
Finish A wide variety of color choices are available. Custom colors are available upon request
F1 Single fusing for 120, 240, 277 and 347V units
F2 Double fusing for 208, 240 and 480V units
DS Deep skirt for cutoff requirement, 30” diameter.
SS Shallow skirt for cutoff requirement, 30” diameter.
H NEMA twist-off photocontrol receptacle
NEMA XXXXX NEMA label. Insert source and wattage for “XXXX” in catalog number
P Protected starter for HPS units. Not available with 08 and 40 voltages
PI Plug-in starter for HPS units.
PS Protected starter for HPS units
PG Plug-in protected starter for HPS units
PCTWSTL120 DTL twist-off photocontrol for 120 volt. Shipped in carton with unit. Must beused with photocontrol receptacle
PCTWSTL12202427 DTL twist-off photocontrol for 120-277 volt. Shipped in carton with unit.Must be used with photocontrol receptacle.
PCTWSTL480 DTL twist-off photocontrol for 480 volt. Shipped in carton with unit. Mustbe used with photocontrol receptacle.
PCTWSTSHRTCAP Shorting cap
PRButton style photocontrol. Available with 120, 208, 240, 277 and 347V only.Limited to 175W and below. Not available with “R” or “PCTWSTL” photocontrols.
R NEMA twist-off photocontrol receptacle
T Both NEMA twist-off photocontrol receptacle and plug-in protected starter
F1 Single fusing for 120, 240, 277 and 347V units
F2 Double fusing for 208, 240 and 480V units
IG-5 Plug-in replacement starter for HPS units
IG-6 Plug-in replacement protected starter for HPS units
IG-7 Plug-in replacement protected starter kit for
LAMP Appropriate lamp shipped
PECHINAHSSXX External house side shield. Insert color for “XX” in catalog number
Standard Features, Options and Accessories
—
Standard - Standard product features
Option - Product options are factory installed
Accessory - Product accessory ships separately
Not Available
S
A
OContact your local sales rep for the most current option and accessory compatibility.
HOLOPHANE® | DESIGNER SERIES | Options and Accessories 63
| OUTDOOR LIGHTING
MongooseSeries
PoleStarSeries MirroStar Somerset Crestwood
Luminaire G PT MS SMSTCW2A,CW3A
Shapes The product has multiple contemporary shapes available for a variety ofarchitectural design options
Housing Heavy duty, cast aluminum ballast housing.
Electrical UL/CUL labeled for wet locations, suitable for ambient temperatures up to40ºC. IP66 Rated
Optics A variety of optics choices provide a wide range of lighting distributions
Mounting A variety of pole and arm mountings are available
Finish A wide variety of color choices are available. Custom colors are availableupon request
F1 Single fusing for 120, 240, 277 and 347V units
F2 Double fusing for 208, 240 and 480V units
B Terminal block and NEMA decal. Not available with “C” option
C NEMA decal. Not available with “B” option
T Spade termination for ballast leads. Available with “MT”, “MA”,“MB”, “MC”, “MD” and “VT” voltages only
3 3” to 2” Tenon adapter, same color as fixture. Available with “V” mounting only
6 6’ Pigtail
HS House side shield for “A”, “C”, “F” and “S” optics only
PS Protected starter for HPS units (P is cat. number for Mongoose)
TB Terminal block
R NEMA twist-off photocontrol receptacle
BKT-5-G Galvanized wood pole bracket
BR-1091-XX 3” to 2” Tenon adapter bracket. Insert color K–black, V–green, W–white or Z–bronze for “XX” in catalog number”
F1 Single fusing for 120, 240, 277 and 347V units
F2 Double fusing for 208, 240 and 480V units
LAMP Appropriate lamp shipped
PTHS House side shield for enclosed optics, A, C, F, and S only
SDXX House side shield for open optic. Insert color K–black, V–green, W–white or Z–bronze for “XX” in catalog number
WBXX Wall bracket for structural mounting. Insert color K–black, V–green, W–white or Z–bronze for “XX” in catalog number
PS-55 Protected starter for HPS units (100-150W)
PS-100 Protected starter for HPS units (250-400W)
—
Standard - Standard product features
Option - Product options are factory installed
Accessory - Product accessory ships separately
Not Available
S
A
OContact your local sales rep for the most current option and accessory compatibility.