Date post: | 28-Feb-2018 |
Category: |
Documents |
Upload: | mark-reyes |
View: | 221 times |
Download: | 0 times |
of 22
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
1/22
Lecture 27: Rotational Dynamics II
Objectives1. Apply Newtons 2nd law of rotation and conservation of
energy to obtain qualitative and quantitative conclusions
on the motion of a system that involves rotating about a
moving axis.2. Analyze work and power delivered to a rotating system.
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
2/22
Again: v = vcmalso v = rand a = r
Sliding (slipping only) K= mv2
Rolling (w/o slipping) K= mv2 + I2
where I depends on the shape of the object
Recall: surface with friction (rolling without slipping)
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
3/22
Newtons second law
3
=
Rotational analog of Newtons second law
= Relationship of translational and angular velocitiesand acceleration, rotating without slipping:
= = Energy relationships: K = K
translation+ K
rotation
= +
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
4/22
Sample Problem 1: Unwinding Cable
A cable is wrapped several times around a uniform solid cylinder
that can rotate about its axis. The cylinder has diameter 0.120m
and mass 50kg. The cable is pulled with a force of 9.0N. Assumingthat the cable unwinds without stretching or slipping, what is its
acceleration? Icm of solidcyl= MR2/2
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
5/22
First calculate the angular acceleration of the cylinder using
Newtons 2ndlaw: = .Torque (
z= FR) is positive as it tends to cause a
counterclockwise rotation:
Therefore the acceleration is:
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
6/22
Sample Problem 2: (Tipler)
A cue stick hits a cue ball horizontally a distance x above
the center of the ball. Find the value of x for which thecue ball will roll without slipping from the beginning.
Express your answer in terms of the radius R of the ball.
for a solid sphere: = 2
5
Cue ball possess both linear and angular acceleration (use this to
relate x with R; = )The net torque about the center of the ball with lever arm, x is:
=
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
7/22
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
8/22
For varying torque:
=
For a constant torque and finite
change in angle,
= = Unit of work:Joules (J)
Work and Power in rotational motion
Power is the rate of doing work: = Ave. Power: =
Or for Instantaneous Power: =
a tangential forceF
tanis involved
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
9/22
Sample Problem 3 (Young and Freedman):
The power output of an automobile engine is advertised to
be 200hp (1.49x105W) at 6000rpm. What is the
corresponding torque?
Using formula for power:
Convert angular velocity to rad/s
=
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
10/22
Given:
= 10.0Nm
I = 2.0kgm2
t = 8.0s0= 0; 0=0
Required: P
Sample Problem 4 (Young and Freedman):
An electric motor exerts a constant torque of 10Nm on a
grindstone mounted on its shaft. The moment of inertia of the
grindstone about the shaft of 2.0kgm2.(a) If the system starts from rest, find the work done by the
motor in 8.0s and the kinetic energy at the end of this time.
(b) What was the average power delivered by the motor?
= =10
Since: I = 2.0kgm2
, therefore:
= 5.0rad/s2
Note: motion here is only rotational.
Using the rotational version of Newtons 2ndLaw:
l d h l l
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
11/22
constant acceleration, 0= 0 and 0=0 the total angular
displacement is:
Therefore, the total work done by torque is:
Again, 0= 0 , the angular velocity and KE after 8.0s are:
The power becomes: P = W/t
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
12/22
Summary: Work, Power and Rotational Dynamics
Work with constant torque: = =
Average Power: = Instantaneous Power: =
Rotational analog of Newtons 2ndlaw:
=
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
13/22
2ndLong exam
26 October (Mon, 12:00-02:00PM)
Coverage: Ch 6 to 10 (+ dot and cross product)
Problem set for chapters 6,7 and 8 will
be emailed on FridayDeadline: Oct. 27 (Tue)
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
14/22
Seatwork :
2 points per letter
(1pt magnitude, 1pt direction)
(a) 40.0Nm
(+z)
(b) 34.6Nm
(+z)(c) 20.0Nm
(+z)
(d) 17.3Nm
(-z)(e) Zero
(f) Zero
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
15/22
15
Young and Freedman, 10.21What fraction the total kinetic energy is rotational for
the following objects rolling without slipping on a
horizontal surface?
SW13: Uniform solid cylinder ( = )
=
=
=12
2 = 1212
2 90
= 14
2 =
12 2
=+= + 2 = 2
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
16/22
16
Young and Freedman, 10.21What fraction the total kinetic energy is rotational for
the following objects rolling without slipping on a
horizontal surface?
SW14: Uniform sphere ( = )
=
=
7
=12
2 = 1225
2 90
= 15
2 =
12 2
=+= + 2 = 7 2
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
17/22
Seatwork- solve problems in your
notebooks
- write the answers only inyour bluebook
- indicate the date
October 15, 20141. Blah?
2. Blah blah!
3. Blah blah blah!
4. Blah blah blah blah!
17
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
18/22
Conversion: 1rev = 2rad Uniform disk: Icm= MR2
(1) A flywheel used for storing energy consists of a uniformdisk of mass 1.50x105kg and diameter 4.40m that rotates
at 3000rpm (314rad/s) about its center of mass. What its
kinetic energy?
(a) 1.11x109J (b) 1.79x1010J (c) 4.82x1010J
(2) A car delivers 175Nm of torque at 5000rpm. What is the
power output of the car at that engine speed?(a) 91.5KW (b) 103KW (c) 2.00kW
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
19/22
4-5) The flywheel of an engine has moment of inertia
2.50kgm2about its rotation axis. The flywheel rotates at
41.9rad/s in 8.00s starting from rest.(4) What is the angular acceleration of the flywheel?
(5) What is the torque applied on the flywheel?
(3) For a hoop lying in the -plane, which of the followingrequires more workbe done by an external agent to accelerate
the hoop from rest to an angular speed
?
a. Rotation about the -axis through the center of the hoopb. Rotation about the axis parallel to the -axis passing
through a point on the hoopsrimc. Rotation about an axis parallel to the
-axis a distance
3
from the center of the loop
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
20/22
Seatwork
- seatwork will be checked at the
end of the class
- if wrong, write the correct
answer- in checking: place the score
above the checkers name
- the checker must sign under
his/her name & student number
October 15, 20141. Blah?
2. Blah blah!
3. Blah blah blah!
4. Blah blah blah blah!
Score: 3/4Checked by:
(signed)
Albert Einstein Jr.
(2013-24601)
X Bleh!!!
20
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
21/22
Seatwork 1
(b)
7/25/2019 2ndLE Lecture 27 - R10 Rotational Dynamics (2)
22/22
Seatwork 2:
(a)