WWW.POSNERS.COM 3 CALL 1-888-POSNERS
WWW.POSNERS.COM 4 CALL 1-888-POSNERS
Cast Iron Balls 6 Cast Steel Shoes 52Post Caps 7 Steel Weld Tabs 53Cast Iron Collars 8 Welded Steel Pipe Caps 55Cast Iron Plugs 8 Base Plates 55Cast Iron Spears & Finials 9 Forged Steel, Cast Iron Tubing Rings 56Plastic Spears & Finials 14 Weldable Steel Elbow 57Cast Iron Rosettes and Medallions 15 Screws 58Wrought Iron Castings 16 Pipe Flanges 59Cast Iron Castings 17 Steel Spheres 60Cast Iron Ornamental Castings 19 Fored Steel Baskets 60Wrought Iron Stamped Leaves 21 Hinges 61Steel Rosettes 22 Hasps 66Cast Iron Corinthian 23 Lock Boxes 67Wrought Iron Bars 24 Door Locks & Accessories 68Wrought Iron Newel Post 24 Deadbolt Locks 68Balusters 26 Rolling Hardware 69Handrail 31 Aluminum Storm Door Castings 70Handrail Brackets 35 Aluminum Picket Castings 72Cast Iron Rail Ends 36 Aluminum Post Balls 77Speed Rail 39 Aluminum Handrail Brackets 77Speed Rail Accessories 48 Aluminum End Caps 78Bar Hammered Square 49 Aluminum Post Caps 78Pressed Picket 49 Aluminum Hinges 79Cast Iron Shoes 50 Aluminum Shoes 79
Table of Contents
WWW.POSNERS.COM 5 CALL 1-888-POSNERS
Notes
Cast Iron Post BallItem # Height Base Ball Diameter
PI224-1 2-3/4” 1” 1-5/16”PI224-125 2-1/2” 1-1/4” 1-1/2”PI224-150 2-3/16” 1-1/2” 1-1/2”
Cast Iron Post BallItem # Fits Over Height Base Ball Diameter
PI116 1” 2-1/4” 1-1/4” 7/8”PI114 1-1/4” 2-1/2” 1-1/2” 1-1/8”PI112 1-1/2” 2-3/4” 1-3/4” 1-3/8”PI118 2” 3-3/4” 2-3/8” 1-3/4”PI121 2-1/2” 4-1/8” 3” 2”PI120 3” 5” 3-1/2” 2-1/2”PI119 4” 5-1/2” 4-1/2” 3”PI126 6” 7-1/2” 6-1/2” 4”
WWW.POSNERS.COM 6 CALL 1-888-POSNERS
Cast Iron Post BallItem # Height Base Ball Diameter
PI9536 3-1/8” 1-3/4” 2-1/4”PI9537 4” 2-1/4” 2-7/8”PI224-150 5-1/4” 2-7/8” 3/11/16”
Cast Iron Post Balls
Cast Iron Post CapsItem # Fits Over Height
PI142 1-1/2” 1-1/8”PI143 2” 1-1/8”PI147 2-1/2” 1-3/8”PI144 3” 1-1/2”PI145 4” 1-3/8”PI149 6” 1-3/4”
Plastic Tubing PlugsItem # Size Gauge
PI35-12-6 1/2” 16PI34-34-1 3/4” 11PI20-075-16 3/4” 16PI20-125-11 1-1/4” 11PI20-125-16 1-1/4” 16PI20-100-11 1” 11PI20-100-16 1” 16PI20-150-11 1-1/2” 11PI20-150-14 1-1/2” 14PI20-200-11 2” 11PI20-200-14 2” 14
WWW.POSNERS.COM 7 CALL 1-888-POSNERS
Steel Pressed Post CapsItem # Fits Over Height
PI151 1” 1/2”PI152 1-1/4” 1”PI153 1-1/2” 3/4”PI154 2” 1”PI155 2-1/2” 1”PI156 3” 1-1/16”PI157* 4” 1-5/8”
Post Caps
*Available in galvanized steel
Cast Iron CollarItem # Fits Over Height Diameter
PI8518 1/2” Square 1-3/4” 1-7/8”
Cast Iron Square CollarsItem # Fits Over Height Width
PI251-1/2 1/2” Square 1-3/4” 1-1/2PI251-5/8 5/8” Square 1-3/4” 1-3/4”PI251-3/4 3/4” Square 1-3/4” 1-7/8”PI251-1 1” Square 2-1/2” 2-1/2”
Cast Iron Collars
Cast Iron Plugs
Cast Iron PlugItem # Fits Height (In.)PI413 1” Square Tubing 13/16
WWW.POSNERS.COM 8 CALL 1-888-POSNERS
Cast Iron Spears & Finials
Cast Iron Spear PineappleItem # Fits Over Width Height
PI810 1” Square 1-1/2” 3”PI812 1/2” Square 1” 2”PI834 3/4” Square 1-3/8” 2-1/2”
Cast Iron PineappleItem # Base Height
PI657 1-3/4” Round 4-1/4”
Cast Iron Spear UrnItem # Height Width
PI219 3-7/8” 1-1/4”
Cast Iron PineappleItem # Base Height
PI657-L 4” Round 8-1/2”
WWW.POSNERS.COM 9 CALL 1-888-POSNERS
Cast Iron Spears & Finials
Quad Finial with Square BaseItem # Fits Over Height Base WidthPI2171/2 1/2” Square 4-1/4” 1”PI2175/8 5/8” Square 4-1/4” 1”
Budded Fleur-de-list FinialItem # Fits Over Height Width Base WidthPI2271/2 1/2” Square 4-7/8” 3-1/8” 1”PI2275/8 5/8” Square 4-7/8” 3” 1”
Cast Iron Spear UrnItem # Height Width
PI8-X 3” 1” Square
WWW.POSNERS.COM 10 CALL 1-888-POSNERS
* Special order
Banana PeelItem # Fits Over Height Width Base WidthPI2181/2 1/2” Square 4-1/2” 2-3/8” 1”PI2185/8* 5/8” Square 4” 2-3/8” 1”PI2183/4* 3/4” Square 4” 2-3/8” 1-1/8”
Cast Iron FinialItem # Fits Over Height Width DiameterPI6914 1/2” Round 4-1/8” 1-3/4” 13/16”
Cast Iron FinialItem # Fits Over Height Width Base WidthPI649-H 5/8” Square 4-1/2” 2-1/4” 1-1/4”PI649-Y 3/4” Square 5-1/2” 2-3/4” 1-1/4”PI649-Z 1” Square 7-7/8 2-1/8 1-3/4
Cast Iron Spears & Finials
WWW.POSNERS.COM 11 CALL 1-888-POSNERS
Emerging Fleur-de-lis FinialItem # Fits Over Height Width Base WidthPI2151/2 1/2” Square 4-1/4” 1-7/8” 1”PI2155/8 5/8” Square 4” 2” 1”PI2153/4 3/4” Square 4” 2” 1-1/8”
Cast Iron SpearItem # Fits Over Height Width Base WidthPI671-3/4 3/4” 5-1/8” 1-5/8” 1-3/8”PI671-1 1” 8” 2-1/4” 1-5/8”
Cast Iron Spears & Finials
Quad Finial with Square BaseItem # Fits Over Height Width Base WidthPI9-H 5/8” Square 4-5/8” 1-1/4” 1-3/16PI9-Y 3/4” Square 5-3/4” 1-7/8” 1-1/4PI9-Z 1” Square 4-5/8” 1-1/2” 1-3/4”
WWW.POSNERS.COM 12 CALL 1-888-POSNERS
* Special order
* Special order
Quad Finial with BallItem # Fits Over Height Width Base WidthPI217WB1/2 1/2” Square 4-1/4” 1” 1”PI217WB5/8 5/8” Square 4-1/4” 1” 1”PI217WB3/4 3/4” Square 4-1/4” 1-1/8” 1-3/8”
Cast Iron Spears & Finials
Fleur-de-lis Finial with Round BaseItem # Fits Over Height Width Base Width RoundPI853-H 5/8” 5-1/2” 3” 1-3/4PI835* 1/2” 4-5/8” 2-1/2” 1”PI835-34* 3/4” 6-5/8” 3-3/4” 2”
Traditional Fleur-de-lis SpearItem # Fits Over Height Width BasePI8832-5/8 5/8” 5-1/4” 3-1/4” 1-1/8”*PI8832-12 1/2” 5-1/4” 3-1/8” 1-1/16”*PI8832-34 3/4” 5-1/4” 3-1/8” 1-1/4”
WWW.POSNERS.COM 13 CALL 1-888-POSNERS
Plastic Triad FinialItem # Fits Over Height
PI200-1/2 1/2” Square 4-1/2”
Cast Iron Spears & Finials
Cast Iron SpearItem # Fits Over Height
PI260-1/2 1/2” 4-3/4”
Plastic Finials
WWW.POSNERS.COM 14 CALL 1-888-POSNERS
Wrought Iron RosettesItem # Diameter Thickness Notes
PI17-1 9-3/16” 5/16” Double faced
Cast Iron RosettesItem # Diameter Thickness Notes
PI681 3-3/4” 7/16” Single faced
Cast Iron RosettesItem # Diameter Thickness Notes
PI9052 2-5/8” 1/4” Single faced
Cast Iron Rosettes & Medallions
WWW.POSNERS.COM 15 CALL 1-888-POSNERS
C-ScrollsItem # Height WidthPI634-8 6-5/16” 8-7/8”PI80-A10 5-1/2” 3-3/4”PI80-A9 4-1/16” 2-3/4”PI84-7 8-7/8” 5-15/16”
S-ScrollsItem # Height WidthPI80-A1 1/2” 1/4PI80-A11 5-7/8” 2-9/16”PI80-A12 7-1/2” 2-3/4”
Wrought Iron Castings
C-Scroll with LeavesItem # Height Width
92-B-4 9-7/8” 6-5/16”
WWW.POSNERS.COM 16 CALL 1-888-POSNERS
*Available in aluminum
Cast Iron Castilian Gate TopperItem # Width HeightPI680-CI 22-1/2” 10-5/8”
Cast Iron Bird of Paradise DesignItem # Height Width
PICL82* 23” 8-1/2”
Cast Iron Bird of Paradise DesignItem # Height Width
PICL81 15-1/4” 8-3/8”
Cast Iron Castings
Wrought Iron Castings
WWW.POSNERS.COM 17 CALL 1-888-POSNERS
Cast Iron CastingsItem # Height WidthPI1014-CI 15-1/2” 14-3/4”
Cast Iron Rose DesignItem # Height Width PI7124-CI 28-1/2” 8-1/2”
WWW.POSNERS.COM 18 CALL 1-888-POSNERS
Cast Iron Castings
WWW.POSNERS.COM 19 CALL 1-888-POSNERS
Cast Iron CastingItem # Fits Height Width
PI6711 1/2” Pickets 13-1/2” 7-1/4”
Cast Iron CastingItem # Fits Height Width
PI6701 1/2” Pickets 14-1/8” 6-1/2”
Cast Iron CastingItem # Fits Height Width
PI6702 1/2” Pickets 14-7/8” 7-5/8”
Cast Iron Ornamental Castings
WWW.POSNERS.COM 20 CALL 1-888-POSNERS
Cast Iron CastingItem # Fits Height Width
PI6717 1/2” Pickets 17-7/8” 7-1/2”
Cast Iron CastingItem # Fits Height Width
PI6714 1/2” Pickets 17-7/8” 7-1/2”
Cast Iron CastingItem # Fits Height Width
PI6716 1/2” Pickets 13-1/4” 6-3/4”
Cast Iron Ornamental Castings
Metal Art Stamped LeafItem # Height Width
PI136-3 2-3/4” 6-1/4”
Metal Art Stamped LeafItem # Height Width External Diameter
PI138-13 7-5/8” 7-1/2” 2-3/8”
Wrought Iron Stamped Leaves
Metal Art Stamped LeafItem # Height Width
PI136-4 2-3/4” 6-1/4”
WWW.POSNERS.COM 21 CALL 1-888-POSNERS
Stamped Steel RosetteItem # Diameter Thickness Notes
PI5956 2-5/8” .020” Single faced
Forged Steel RosetteItem # Fits Over Diameter Height
PI13-02016051 3/4” Round 4-15/16" 3/16”
Steel Rosettes
WWW.POSNERS.COM 22 CALL 1-888-POSNERS
Cast Iron PostItem # Height Top Width Base Width
PI6000-CI 27-5/8” 5-1/4” 6-1/2”
Cast Iron Post CapItem # Height WidthPI657P 7” 3-3/8”
Cast IronCorinthian
WWW.POSNERS.COM 23 CALL 1-888-POSNERS
Wrought Iron Hammered NewelItem # Fits Height Notes
PI112-7 1” Square 47” Sphere Hammered
Wrought Iron Bars
Twisted SquareItem # Fits Length
PI11-12T 1/2” Square 20”PI11-58365 5/8” Square 35-1/2”PI11-1242 1/2” Square 42”
Wrought Iron Newel Post
WWW.POSNERS.COM 24 CALL 1-888-POSNERS
Wrought Iron Twisted NewelsItem # Height Fits Notes
PI113-1 43-1/4” 3/4” Basket TwistPI113-2 43-1/4” 1-3/16” Basket Twist
Wrought Iron Twisted NewelItem # Height Fits Notes
PI113-5 43-1/4” 3/4” Stamped Twist
Wrought Iron Newel Post
WWW.POSNERS.COM 25 CALL 1-888-POSNERS
Wrought Iron Hammered BalusterItem # Picket Width Height
PI109-3 3/4” 1-1/8” 39-1/2”
Wrought Iron Tubular BalusterItem # Height External Diameter Diameter
PI148-1 35-7/16” 1-1/8” 1-3/16”
Balusters
WWW.POSNERS.COM 26 CALL 1-888-POSNERS
Wrought Iron Tubular BalusterItem # Diameter Height Notes
PI148-2 1-3/16” 35-7/16” Double Bushing Design
Balusters
WWW.POSNERS.COM 27 CALL 1-888-POSNERS
Wrought Iron Twisted BalusterItem # Fits Height NotesPI48-1 1/2” Square 35-7/16” Double Basket
Wrought Iron Twisted BalusterItem # Fits Height NotesPI48-2 1/2” Square 35-7/16” Single Basket
Wrought Iron Twisted BalusterItem # Fits Height WidthPI50-5 1/2” Square 35-7/16” 1-3/16”
Balusters
Wrought Iron Twisted BalusterItem # Fits Height NotesPI50-7 1/2” Square 35-7/16” Samped scroll, features a
two-twist design
Wrought Iron Twisted BalusterItem # Fits Height WidthPI50-8 1/2” Square 35-7/16” 5-1/2”
Wrought Iron Twisted BalusterItem # Fits Height NotesPI50-6 1/2” Square 35-7/16” Double Twist
WWW.POSNERS.COM 28 CALL 1-888-POSNERS
Wrought Iron Art Deco BalusterItem # Fits Height Notes
PI70-D1 9/16” Square 35-7/17” Wavy Design
Wrought Iron Hammered BalusterItem # Diameter Height NotesPI98-1 1” Picket 39-3/8” Taper Design
Wrought Iron Balcony PicketItem # Fits Height Width
PI64-H10 9/16” Square 35-7/16” 1-3/16”
Balusters
WWW.POSNERS.COM 29 CALL 1-888-POSNERS
Wrought Iron Scroll BalusterItem # Height Width Notes
PI52-1* 34-1/4” 13-3/4” Leaf Design
Balusters
Wrought Iron Ornate ScrollItem # Height Width Notes
PI541-2* 35-7/16” 13-1/2” S-Scroll Design
Wrought Iron Ornate ScrollItem # Height Width NotesPI62-1 28-3/8” 9-1/4” S-Scroll Design
*Complementary C-Scroll item # PI634-8 (page 16)
*Complementary Stamped Leaf item # PI136-3 and # PI136-4 (page 21)
WWW.POSNERS.COM 30 CALL 1-888-POSNERS
Top Rail MouldingItem # Length NotesTB100 20’ Fits 1” channel or 1/2”
squareTB150 19’ Fits 1-1/4” or 1-1/2”
channel
Handrail
Molded Steel HandrailItem # Length Width ThicknessPI114-2 8’ 2-1/4” 5/8”
Forged Steel Etched Vine Design HandrailItem # Length Width ThicknessPI114-5 8’ 1-9/16” 5/16”
Forged Steel Scallop Edge HandrailItem # Length Width ThicknessPI114-8 8’ 1-9/16” 5/16”PI114-9 10’ 1-3/16” 5/16”
WWW.POSNERS.COM 31 CALL 1-888-POSNERS
Handrail
Forged Steel Lamb’s ToungeItem # Height Width
PI115-2 11-7/16” 2-1/4”
Forged Steel Vine Design VoluteItem # Height Width
PI116-10* 10-13/16” 1-9/16”
Forged Steel VoluteItem # Height Width
PI812-12 6-5/16” 11-1/4”
*Lambs Tongue for item # PI114-5 (page 33)
WWW.POSNERS.COM 32 CALL 1-888-POSNERS
Handrail
Channel LateralItem # Fits Height Width Iron Type
PI1CL-L 1” x 1/2” Channel 5-7/8” 6” Cast IronPI1CL-R 1” x 1/2” Channel 5-7/8” 6” Cast Iron
Molded LateralItem # Fits Height Width Iron Type
PI1LS-L 1” x 1/2” Channel 6-3/8” 6-7/8” Cast Iron
PI1LS-R 1” x 1/2” Channel 6-3/8” 6-7/8” Cast Iron
WWW.POSNERS.COM 33 CALL 1-888-POSNERS
Handrail
Channel LateralItem # Fits Height Width Iron Type
PI401-R 1-3/4” Cap Rail 10-1/2” 12-1/4” Malleable IronPI401-L 1-3/4” Cap Rail 10-1/2” 12-1/4” Malleable Iron
Molded LateralItem # Fits Height Width Iron Type
PI400-R 1-3/4” Cap Rail 10” 12” Malleable IronPI400-L 1-3/4” Cap Rail 10” 12” Malleable Iron
WWW.POSNERS.COM 34 CALL 1-888-POSNERS
Cast Iron Round Handrail BracketsItem # Height Width Hole Size NotesPI93R 2-3/4” 2-1/2” 3/8” For Round
Tubing, Extends 2-1/4” from wall
Cast Iron Flat Handrail BracketsItem # Height Width Hole Size NotesPI3-A 2-3/4” 2-1/2” 3/8” Extends 2-1/2”
from wall
Handrail Brackets
Steel Handrail BracketsItem # Height Width Hole Size NotesPI3-S 3-1/4” 2-3/4” 3/8” Extends 3” from
wall
WWW.POSNERS.COM 35 CALL 1-888-POSNERS
Cast Iron FlangeItem # Height Width FitsPI654 1-1/32” 2-5/16” 1-5/8” & 1-3/4”
Molded or Tubular Handrail
Cast Iron BracketItem # Height Width FitsPI653 15/16” 1-1/2” 1” x 1/2”
Cast Iron Rail Ends
WWW.POSNERS.COM 36 CALL 1-888-POSNERS
Molded Volute Rail EndItem # Fits Length Height
PI201 1-3/4” Cap Rail 4” 2-5/8”PI201XL 2-1/4” Cap Rail 4-3/4” 2-5/8”
Molded Lambs Tounge Rail EndItem # Fits Length
PI6928 1-3/4” Cap Rail 5-1/2”PI6928XL 2-1/4” Cap Rail 5-3/8”
All Purpose Lambs Tounge Rail EndItem # Fits Length
PI5-LT 1-3/4” Cap Rail 5-3/4”
All Purpose Lambs Tounge Rail EndItem # Fits LengthPI5-A 1” x 1/2” x 1/8
Channel4-1/2”
Cast Iron Rail Ends
WWW.POSNERS.COM 37 CALL 1-888-POSNERS
Cast Iron Rail Ends
All Purpose Lambs Tounge Rail EndItem # Fits Length
PI199XL 2-1/4” Cap Rail 5”
WWW.POSNERS.COM 38 CALL 1-888-POSNERS
Speed Rail
WWW.POSNERS.COM 39 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
07060 1-1/4” #5E Tee-E
Speed RailItem # Size Notes
08040 1-1/2” #5 Tee
Speed RailItem # Size Notes
08230 1-1/2” #17 Adjustable Elbow
Speed RailItem # Size Notes
08330 1-1/2” #19 Adjustble Cross
Speed Rail
WWW.POSNERS.COM 40 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Hole Size Notes
27090 1-1/4” (4) 7/16” #42 Round Base Flange
Speed RailItem # Size Hole Size Notes
27130 1-1/4” (4) 7/16” #45 Square Base Flange
Speed RailItem # Size Slot Size Notes
27140 1-1/4” 9/16” x 13/16” #46 Base Flange28140 1-1/2” 9/16” x 13/16” #46 Base Flange
Speed RailItem # Size Slot Size Notes
27150 1-1/4” 9/16” x 13/16” #46 Adjustable Flange
Speed Rail
WWW.POSNERS.COM 41 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Hole Size Notes
27280 1-1/4” (3) 7/16” #50 Wall Mount Flange
Speed RailItem # Size Hole Size Notes
27360 1-1/4” (2) 3/8” #55 Offset Support Bracket
Speed RailItem # Size Hole Size Notes
28050 1-1/2” (3) 7/16” #41 Adjustable Flange (Wall Mount Only)
Speed RailItem # Size Notes
H07020 1-1/4” #3 Elbow8020 1-1/2” #3 Elbow
Speed Rail
WWW.POSNERS.COM 42 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
7030 1-1/4” #3AE Adjustable Elbow
Speed RailItem # Size Notes
7040 1-1/4” #5 Tee8040 1-1/2” #5 Tee
Speed RailItem # Size Notes
7090 1-1/4” #7 Cross8090 1-1/2” #7 Cross
Speed RailItem # Size Notes
H07080 1-1/4” #6 Angle Tee(45 Degrees)
Speed Rail
WWW.POSNERS.COM 43 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
7120 1-1/4” #9 Side Outlet8120 1-1/2” #9 Side Outlet
Speed RailItem # Size Notes
7150 1-1/4” #11E Side Outlet Tee-E
Speed RailItem # Size Notes
7160 1-1/4” #12 Short Barrel Cross
Speed RailItem # Size Notes
7170 1-1/4” #13 Side Outlet Cross
Speed Rail
WWW.POSNERS.COM 44 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
H07230 1-1/4” #17 Adjustable Elbow
Speed RailItem # Size Notes
7270 1-1/4” #17F Adjustable Elbow
Speed RailItem # Size Notes
7330 1-1/4” #19 Adjustable Cross Assembly
Speed RailItem # Size Notes
7370 1-1/4” #21-45 Adjustable Cross (30-45 Degrees)
Speed Rail
WWW.POSNERS.COM 45 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
7400 1-1/4” #23 Adjustable Tee or Cross
Speed RailItem # Size Notes
7630 1-1/4” #70 External Coupling
8630 1-1/2” #70 ExternalCoupling
Speed RailItem # Size Notes
8110 1-1/2” #5 ExtendedBarrel Tee
Speed RailItem # Size Notes
H07140 1-1/4” #11 Side OutletTee
8140 1-1/2” #11 Side OutletTee
Speed Rail
WWW.POSNERS.COM 46 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
8240 1-1/2” #17E Adjustable Elbow
Speed RailItem # Size Notes
H07100 1-1/4” #7E Cross-E
Speed RailItem # Size Notes
H07220 1-1/4” #16 Bolt-On Tee
Speed RailItem # Size Notes
H07250 1-1/4” #17EM Adjust-able Elbow
Speed Rail
WWW.POSNERS.COM 47 CALL 1-888-POSNERS
Photos by Hollaender
Speed RailItem # Size Notes
H07420 1-1/4” #25 Side OutletAdjustable Elbow or Tee
Speed RailItem # Size Notes
H07900 1-1/4” #84AL Handrail Return
H07910 1-1/4” #84AR Handrail Return
Speed RailAccessories
Speed Rail PlugItem # Size Notes
7610 1-1/4” #62 Mach. Plug Sch. 40 (OD PIPE)
H07600 1-1/4” #60 Mach. Plug Sch. 40 (OD FITTING)
Speed Rail PlugItem # Size Notes
H07640 1-1/4” #70E Internal Coupling (Friction Fit)
WWW.POSNERS.COM 48 CALL 1-888-POSNERS
Photos by Hollaender
Bar Hammered Square
Wrought Iron Bar Hammered SquareItem # SizePI118-1 1/2” x 20’
Pressed Picket
Pressed Picket BareItem # Height WidthPI58-72PP 72” 5/8”
WWW.POSNERS.COM 49 CALL 1-888-POSNERS
Cast Iron ShoesItem # Fits Over Height Width w/ Ears Depth
PI70-EE 9/16” 13/16” 1-1/16” 2-3/8”PI70-MM 1” 1-3/8” 1-5/8” 3-5/8”
Cast Iron ShoesItem # Fits Over Height Width
PI70-AA 1/2” PI70-AA-34 3/4”
Cast Iron ShoeItem # Fits Over Height Width Depth
PI70-LL 1” 1-3/8” 1-13/16” 2-13/16”
Cast Iron Shoes
Cast Iron ShoeItem # Fits Over Height Width Depth
PI70-DD 1” 1-7/8” 2” 2”
WWW.POSNERS.COM 50 CALL 1-888-POSNERS
* Special order
Cast Iron Shoes
Cast Iron ShoesItem # Fits Fits Height Width
PICSH100 1” Sq. Tubing 3” Base Plate 1-7/8 3-3/8PICSH150 1-1/2” Sq. TubingPICSH200* 2” Sq. Tubing
Cast Iron Shoe - Flanged ShoeItem # Fits Collar Base Top
PI70-CC 1” Sq. Tubing 2” Deep 3-1/4” x 3-1/4” 1-5/16” x 1-5/16”
Cast Iron Shoe - Flanged ShoeItem # Fits Collar Base Top
PI70-CC 1-1/2” Sq. Tubing 2” Deep 3-3/4” x 3-3/4” 1-7/8” x 1-7/8”
Cast Iron Shoe CoverItem # Fits Width Height
PI70-CC 2” Square, 4” Base Plate 4-5/8” 2”
WWW.POSNERS.COM 51 CALL 1-888-POSNERS
Stamped Steel Flat Square FlangeItem # Fits Over Height WidthPI70-100-S 1” 3/4” 4”PI70-125-S 1-1/4” 3/4” 4”PI70-150-S 1-1/2” 3/4” 4”PI70-200-S 2” 3/4” 5-1/4”
Cast Steel Shoes
Cut Steel Three Tier Square ShoesItem # Fits Over Height WidthPI819-8 1/2” Square 5/16” 1-1/2”PI819-2S 1” Square 3/4” 3”
WWW.POSNERS.COM 52 CALL 1-888-POSNERS
Steel Weld Tabs
Steel Weld TabsItem # Height Width Thickness Hole Dia
PIWT-107 2-7/8” 2-5/8” 3/16” 3/8”
Steel Weld TabsItem # Height Width (In.) Thickness (In.) Hole Diameter
PIWT-103 2 1/8 1 3/8”PIWT-106 3-3/8” 2” 1/8” 3/8”
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-102 2-3/8” 1” 1/8” 3/8”
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-101 1-1/2” 1” 1/8” 3/8”
WWW.POSNERS.COM 53 CALL 1-888-POSNERS
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-104 1-1/2” 1” 1/8” 3/8”PIWT-104S 1-1/2” 1-1/2” 3/16” 3/8”
Steel Weld Tabs
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-107 3-1/2” 1-1/2” 3/16” 3/8”
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-108 3-1/4” 1” 1/8” 3/8”
Steel Weld TabsItem # Height Width Thickness Hole Diameter
PIWT-105 2-3/4” 2-5/8” 1/8” 3/8”
WWW.POSNERS.COM 54 CALL 1-888-POSNERS
Welded Steel Pipe Caps
Steel Weld CapsItem # Outer Diameter Height Fits Thickness
PI3218-C 1” 5/8” 1” 10 GagePI3219-C 1-1/4” 7/8” 1-1/4” 10 GagePI3220-C 1-1/2” 7/8” 1-1/2” 10 GagePI3221-C 2” 1-1/4” 2” 10 GagePI3222-C 2.875” 1-1/4” 2-1/2” 10 Gage
PI3225-350 4” 1-1/2” 3-1/2” 10 GagePI3225-4 4-1/2” 1-5/8” 4” 10 GagePI3225-6 6-5/8” 2-1/2” 6” 10 GagePI3225-8 8-5/8” 4” 8” 10 Gage
Base Plates
Steel Base PlatesItem # Size Thickness Hole Diameter
PIWT-113 3” Square 3/16” 3/8”PIWT-114 4” Square 3/16” 3/8”PIWT-116 6” Square 1/4” 7/16”PIWT-118 8” Square 1/4” 7/16”
WWW.POSNERS.COM 55 CALL 1-888-POSNERS
Forged Steel, Cast Iron Tubing Rings
Square TubingItem # Diameter
PI60-350 3-1/2”PI60-400 4”PI60-450 4-1/2”PI60-500 5”PI60-600 6”PI62-1000 10”
Round Bar Cast Iron RingItem # Diameter
PI81-229 3”
Forged Steel Round Bar RingItem # Diameter
PI13-31013-356 5”
WWW.POSNERS.COM 56 CALL 1-888-POSNERS
Elbow Welds - SteelInside Diameter 90 Degrees 45 Degrees 30 Degrees
3/4” PI075-90
1 PI100-90 PI100-45
1-1/4 PI125-90* PI125-45 PI125-30
1-1/2 PI150-90* PI150-45
2 PI200-90 PI200-45
3 PI250-90
4 PI400-90*
90 degree angle
45 degree angle
Weldable Steel Elbows
*Available in aluminum
WWW.POSNERS.COM 57 CALL 1-888-POSNERS
Screws
One-Way Lag Screws
Item # Height Width
LOW25N150 1/4” 1-1/2”
LOW31N150 5/16” 1-1/2”
LOW31N2 5/16” 2”
LOW31N3 5/16” 3”
LOW31N4 5/16” 4”
WWW.POSNERS.COM 58 CALL 1-888-POSNERS
Steel Pipe Flanges
Item # Pipe Size
PI628 1-1/4”
PI636 1-1/2”
PI644 2”
Welding Connectors
Item # Pipe Size
PI1013 1”
PI1023 1-1/4”
PI1033 1-1/2”
PI1043 2”
Pipe Flanges
WWW.POSNERS.COM 59 CALL 1-888-POSNERS
WWW.POSNERS.COM 60 CALL 1-888-POSNERS
Forged Steel Basket with Plain Square Bar FilamentsItem # Height Width Fits
PI159-3 4-15/16” 2-3/8” 1/2”
Forged Steel Baskets
Hot-Stamped Steel Smooth TextureItem # Diameter
PI116-F2 1”PI116-F3 1-3/16”PI116-F4 1-9/16”PI116-F5 1-15/16”
Hollow Steel SpheresItem # Diameter
PI80-2-S 2”PI80-3-S 3”PI80-4-S 4”PI80-5-S 5”PI80-6-S 6”
Steel Spheres
Hinges
Stainless Steel Piano HingesItem # Width Length
STS311-100 1” 72”
STS311-150 1-1/2” 72”
STS314-1/4 2” 72”
PH3SS 3” 72”
Aluminum Piano HingesItem # Width Length
065024-72 1-1/2” 72”
075032-72 2” 72”
PHA3X72* 3” 72”
*With 1/4” Pin
Steel Piano HingesItem # Width Length
314-150 1-1/2” 72”
314-200 2” 72”
314-250 2-1/2” 72”
314-300 3” 72”
WWW.POSNERS.COM 61 CALL 1-888-POSNERS
Hinges
Aluminum Butt HingesItem # Width Length Thickness
1808C-AL 3” 3” 0.090
1808E-AL 4” 4” 0.120
Steel Butt HingesItem # Width Length Thickness Notes
850-200 2” 2” 0.083 Standard
850-300 3” 3” 0.125 Heavy Duty
850-300S 3” 3” 0.092 Standard
850-350 3-1/2” 3-1/2” 0.097 Standard
850-400 4” 4” 0.178 Heavy Duty
850-400S 4” 4” 0.097 Standard
850-500 5” 5” 0.198 Heavy Duty
850-600 6” 6” .0198 Heavy Duty
Stainless Steel Butt HingesItem # Width Length Gauge
1808C-SS 3” 3” 11
1808E-SS 4” 4” 11
1808F-SS 5” 5” 11
WWW.POSNERS.COM 62 CALL 1-888-POSNERS
Hinges
Bat Wing HingesItem # Hole Size Height Length Width Notes
PI55BW-F 1/2” 1-1/16” 1-1/2” 1” Female
PI55BW-M 1/2” 1-1/6” 1-1/2” 1” Male
Decorative HingesItem # Size Hole Size Notes
PI55DH 2-5/8” x 7” 1/4” With Brass Bushings
Female Male
WWW.POSNERS.COM 63 CALL 1-888-POSNERS
Hinges
WWW.POSNERS.COM 64 CALL 1-888-POSNERS
Full Mortise HingesItem # Width Length
F179-350 3-1/2” 3-1/2”F179-400 4” 4”F179-450 4-1/2” 4-1/2”FBB179-5450* 5” 4-1/2”
*Stainless Steel
Steel Barrel HingesItem # Width Length
PI55-3 5/8” 3”PI55-5 1” 5”PI55-7 1-1/4” 7”
Adjustable Barrel HingesItem # Width Length
PI55-75-ADJ 3/4” Steel J-Bolt 2-1/4”
3” Barrel Hinge 5” and 7” Barrel Hinge
Hinges
WWW.POSNERS.COM 65 CALL 1-888-POSNERS
Spring HingesItem # Width Length
2060-350* 3-1/2” 3-1/2”2060-400** 4” 4”2060-450 4-1/2” 4-1/2”
*Available in Stainless Steel**Avaailable in Brass
T-HingesItem # Size Notes
908-400 4” Heavy 908-60 6” Heavy908-800 8” Heavy
Strap HingeItem # Size Notes
900-200 2” Light902-400 4” Heavy900-600 6” Light902-600 6” Heavy902-800 8” Heavy902-1200 12” Heavy
Hasps
WWW.POSNERS.COM 66 CALL 1-888-POSNERS
Rotating Post Safety HaspItem # Size
911-250 2-1/2”911-350 3-1/2”911-450 4-1/2”911-600 6”
Extra Heavy Hasps - Stainless SteelItem # Size
SP941-750 7-1/2”
Adjustable Staple Safety HaspItem # Size
915-600 6”
Lock Boxes
*Available in aluminum
WWW.POSNERS.COM 67 CALL 1-888-POSNERS
Double Hole Lock BoxesItem # Back Set Width Hole Width
PI15-276 2-3/8” 1-5/16” 2-1/8”PI15-250 2-3/8” 1” 2-1/8”
PI13-215 2-3/8” 1-1/2” 2-1/8”
Single Hole Lock BoxesItem # Back Set Width Hole Width
PI15-176* 2-3/8” 1-5/16” 2-1/8”PI15-150* 2-3/8” 1” 2-1/8”
Door Locks & Accessories
WWW.POSNERS.COM 68 CALL 1-888-POSNERS
‘E-Z’ Set LocksetItem # Notes
PIT6113 Passage, Polished Brass
‘E-Z’ Set LocksetItem # Notes
PIT6333 Keyed Entry
Deadbolt Locks
Polished Brass Deadbolt LocksItem # Notes
PIDC-3 Double Cylinder Door Lock w/Concealed ScrewsPIEVD2113 ‘E-Z’ Set Double Cylinder Deadbolt LockPIEVS1113 ‘E-Z’ Set Single Cylinder Deadbolt Lock
WWW.POSNERS.COM 69 CALL 1-888-POSNERS
Rolling Hardware
Gate Spring RollerItem # Height Notes
PI50-9 16-3/4” 3” Swivel Caster w/ Bearing, Heavy Duty Spring
Rubber RollerItem # Size Wheel Diameter
PI65-300 3” 2-3/8”
Aluminum Casting with Steel Weld TabsItem # Height Width
PIM3 33-1/8” 10”
Aluminum Storm Door Castings
Aluminum Casting with Steel Weld TabsItem # Height Width
PIM6 33-1/4” 7-1/2”
WWW.POSNERS.COM 70 CALL 1-888-POSNERS
Cast Aluminum Door Frieze with Steel Weld TabsItem # Height WidthPIM-13 5-1/4” 30-7/8”
Aluminum Storm Door Castings
Aluminum Casting with Steel Weld TabsItem # Height WidthPIM1 33-1/8” 8-1/8”
WWW.POSNERS.COM 71 CALL 1-888-POSNERS
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI12 1/2” Pickets 12-5/8” 6-3/8”
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI1 1/2” Pickets 14” 6-3/8”
Aluminum Picket Castings
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI196 1/2” Pickets 6” 7-1/2”
WWW.POSNERS.COM 72 CALL 1-888-POSNERS
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI03-068 1/2” Pickets 13-7/8” 7-1/2”
Contemporary Design with Steel Weld TabsItem # Height Width
PI03-023 15-3/4” 7-5/8”
Contemporary Design with Steel Weld TabsItem # Height Width Thickness
PI03-700 22-1/8” 9-1/2” 3/8”
WWW.POSNERS.COM 73 CALL 1-888-POSNERS
Aluminum Picket Castings
WWW.POSNERS.COM 74 CALL 1-888-POSNERS
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI03-039 1/2” Pickets 18-1/2” 6-3/4”
Aluminum Picket Casting - Grape Accents with Steel Weld TabsItem # Fits Height WidthPI23 1/2” Pickets 15-1/4” 7”
Aluminum Picket Casting - Rose Accents with Steel Weld TabsItem # Fits Height WidthPI22 1/2” Pickets 15-1/2” 6-5/16”
Aluminum Picket Castings
WWW.POSNERS.COM 75 CALL 1-888-POSNERS
Aluminum Picket Casting - Oak Accents with Steel Weld TabsItem # Height Width
PI21 15” 7-1/2”
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI3 1/2” 12-7/8” 6-3/4”
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height Width
PI03-038 1/2” 18” 6-1/2”
Aluminum Picket Castings
Aluminum Picket Castings
WWW.POSNERS.COM 76 CALL 1-888-POSNERS
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI8 1/2” Pickets 4” 4”
Aluminum Picket Casting with Steel Weld TabsItem # Fits Height WidthPI2 1/2” Pickets 16-1/2” 7-1/8”
Aluminum Handrail Brackets
Cast Aluminum Handrail BracketsItem # Width Notes
PI3A-A 2-3/4” For Square TubingPI93R-A 2-3/4” For Round Tubing
Die Cast AluminumItem # Fits Over Height Ball DiameterPI118-A 2” Tubing 3-3/4” 3-3/4”PI120-A 3” Tubing 4-1/2” 2”
Aluminum Post Balls
WWW.POSNERS.COM 77 CALL 1-888-POSNERS
Aluminum Die CastsItem # Size
PI3239-CA 1-1/4”PI3240-CA 1-1/2”
Aluminum End Caps
Square Newel Post CapsItem # Fits Over
PI142-A 1-1/2”PI143-A 2”PI144-A 3”PI145-A 4”
WWW.POSNERS.COM 78 CALL 1-888-POSNERS
Aluminum Post Caps
Aluminum Butt HingesItem # Open Width Length Gauge
1808C-AL 3” 3” 11
1808E-AL 4” 4” 11
Aluminum Hinges
WWW.POSNERS.COM 79 CALL 1-888-POSNERS
Aluminum ShoesItem # Fits Over Height WidthPI70-A10 1” 2-7/8” 3/4”
Aluminum ShoesItem # Fits Over NotesPI70-MM-A 1” Tubing Straight I.W.
Aluminum Shoes
WWW.POSNERS.COM 80 CALL 1-888-POSNERS
WWW.POSNERS.COM 81 CALL 1-888-POSNERS
CORPORATE HEADQUARTERS PO Box 5778
Capitol Heights MD 20791 (301) 350-1000 Phone
(301) 350-1051 Fax Credit Application
4600-J Wedgewood Blvd. 44180 Airport View Dr. 810 Cromwell Park Dr. 4003-C Westfax Drive 1190 International Pkwy. Frederick MD 21703 Hollywood MD 20636 Glen Burnie MD 21061 Chantilly, VA 20151 Fredericksburg VA 22406 Phone (301) 668-4450 Phone (301) 373-6390 Phone (410) 768-0300 Phone (703) 631-3313 Phone (540) 658-2754 Fax (301) 668-4454 Fax (301) 373-6394 Fax (410) 768-0301 Fax (703) 631-0175 Fax (540) 286-1122
Business Information
Business Name:_________________________________________ Line of Credit Requested: _________________
Phone: (_______) ______________________________ Fax: (_______) __________________________________
Physical Address: __________________________________ City: __________________ Zip Code: ___________
Mailing Address: ___________________________________ City: __________________ Zip Code: ___________
D/B/A: _____________________________________________ Federal Tax ID: ___________________________
Tax Exempt Numbers: Maryland___________________ Virginia_________________ DC ___________________ **Please attach copy of Exempt Certificates for MD, VA & DC if exempt in these states**
Type of Business: __________________ Date Established: _________________ Years in Business: ___________
Credit Information
Mortgage Holder/ Landlord: ____________________________________ Phone: (_____) ____________________
Address: __________________________________________ City: __________________ Zip Code: ___________
Ownership: Sole Proprietorship Partnership LLC Corporation
Principal: ____________________________________________________________________________________ (Name) (Title) (SS #) Principal: ____________________________________________________________________________________ (Name) (Title) (SS #)
Trade References
Name: _____________________________________ Phone: (_____) ____________ Fax: (_____) ____________
Name: _____________________________________ Phone: (_____) ____________ Fax: (_____) ____________
Name: _____________________________________ Phone: (_____) ___________ Fax: (_____) ____________
Bank References
Bank Name: ________________________________ Phone: (______) _____________ Fax: (_____) ____________
Address: _______________________________________ City: ____________________ Zip Code: ____________
Account No: _____________________________________ Contact: _____________________________________
Has this company or any of its principals ever filed bankruptcy? YES NO
If “Yes,” Please Explain: ________________________________________________________________________
Agreement In Consideration for the extension of credit, said business promises to pay for all purchases within the terms agreed and agrees to pay a service charge per month of 2% on all past due balances. In the event any third parties are employed to collect any outstanding balances owed by said business the undersigned agrees to pay reasonable collection costs, including attorney fees, whether or not litigation has commenced, and all costs of litigation incurred. All deliveries will be subject to a fuel charge and an additional freight charge as applicable. The undersigned represents that he/she has the authority to execute the credit agreement on behalf of the business identified. Print Name: _________________________________________ Title:_____________________________________
Signature:___________________________________________ Date:_____________________________________
CREDIT DEPARTMENT USE ONLY
Line of Credit: Approved/ Denied Amount: ______________ Date: __________ Salesperson: Initials ______ Number ____
Comments:______________________________________________________________________________________________
Have you seen our latest Steel Catalog?
Ask our team for a copy today!