Date post: | 22-Jan-2018 |
Category: |
Engineering |
Upload: | eng-ahmed-bakaal |
View: | 186 times |
Download: | 14 times |
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
1 ACTIX User Manual
PPaarrtt ““33””
AAccttiixx AAnnaallyyzzeerr aanndd SSppoottlliigghhtt
BY
AAAhhhmmmeeeddd OOOmmmaaarrr AAAbbbddd EEElll---BBBaaadddeeeaaa MMMooohhhaaammmeeeddd
RRRFFF eeennngggiiinnneeeeeerrr
AAAhhhmmmeeedddooommmaaarrr___888777@@@yyyaaahhhoooooo...cccooommm
+++222 ––– 000111000000888444333000999111999
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
2 ACTIX User Manual
Actix Facts 1. Founded 1991
2. Global software & solution provider
3. Serving 508 mobile industry customers
4. More than 10,000 installed licences
Outlines - Actix Software Installation.
S/W setup.
Workspace Creation.
Cell Ref creation.
- Actix Analyzer.
2G analysis.
3G analysis.
KPIs report generation.
- Actix Spotlight.
Radio Network Analysis.
Event-Based Troubleshooting.
Reporting.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
3 ACTIX User Manual
Firstly ……. How can we install Actix ?
………………………………………………. Finish
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
4 ACTIX User Manual
After starting Analyzer, choose how you want to proceed by selecting an engineering process.
We will start with “Analyzer Classic” then “Spotlight” So…..Select Analyzer “Classic” and enjoy…
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
5 ACTIX User Manual
After Actix setup we need to create workspace .. View >> Display new map
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
6 ACTIX User Manual
Loading cell file… Unfortunately Actix isn’t compatible with TEMS cell file, It accept “Cell Ref ” . How can we create “Cell Ref ”? Open TEMS cell file and delete the first raw
Save the file as “ Text (Tab delimited)”
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
7 ACTIX User Manual
Actix >> Cells >> Network Explorer
Import from new template
Open the text file
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
8 ACTIX User Manual
Write templete name >> next
GSM_Cells >> Sector_ID >> Select CI
Repeat for each of the fields in the GSM_Cell node and GSM_Site node then press finish…
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
9 ACTIX User Manual
Repeat the same procedures to create 3G Cell Ref.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
10 ACTIX User Manual
Load “Egypt map” as shown below
Enjoy
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
11 ACTIX User Manual
How can you load cell ref ? Tools >> Preferences >> CellRefs >>File Location >> Open it
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
12 ACTIX User Manual
Now we are ready for log files analysis... 2G Log Files analysis Load 2G log files
After loading log files we should merge them to be one log file Tools >> Create Superstream
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
13 ACTIX User Manual
Select MS1 and change name to be “2G DT” Note: MS1>2G , MS2 > 3G
Open 2G interfaces that help you for log files analysis Right click on log files >> Display From >> GSM interfaces as shown below ….one by one
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
14 ACTIX User Manual
2G analyzer interface:
Plot Rxlev 2G DT >> Down Link Measurements >> ServRxLevSub >> Drag to the map
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
15 ACTIX User Manual
Modify ranges and adjust colors :
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
16 ACTIX User Manual
Plot Rx qual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
17 ACTIX User Manual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
18 ACTIX User Manual
Plot serving CI 2G DT >> Serving Cell Parameters >> ServCI >> right click: Display on map
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
19 ACTIX User Manual
Plot Events 2G DT >> TEMS >> TEMSEventHandoverOk >> Drag to map
If you want to run log files:
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
20 ACTIX User Manual
3G Log Files analysis Create 3G DT super stream by merging log files (MS2)
Create 3G analyzer interface
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
21 ACTIX User Manual
Plot RSCP 3G DT >> 3GUMTS >> Down Link Measurements >> Uu_ActiveSet_RSCP >> Uu_ActiveSet_RSCP_0
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
22 ACTIX User Manual
Plot Ec/No 3G DT >> 3GUMTS >> Down Link Measurements >> Uu_ActiveSet_Ec/No >> Uu_ActiveSet_Ec/No_0
Plot Active set count (Number of cells in Active set list)
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
23 ACTIX User Manual
3G DT >> 3GUMTS >> Down Link Measurements >> Uu_ActiveSet_Count
Plot serving cells (Scrambling codes): 3G DT >> 3GUMTS >> Down Link Measurements >> Uu_ActiveSet_SC >> Uu_ActiveSet_SC_0
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
24 ACTIX User Manual
Plot RSCP footprint of specific cell (CS) 3G DT >> 3GUMTS >> Pilot Measurements >> CPICH_AllSets_UE_RSCP_For_SC >> select your SC
Plot 3G Events 3G DT >> TEMS >> TEMS Event
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
25 ACTIX User Manual
HSDPA Throughput analysis 3G UMTS >> Down Link Measurements >>3G HSDPA >> Uu_HSDPA_Throughput_MAC >> Display on Workbook
Excell sheet will be opened as shown.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
26 ACTIX User Manual
Using Pivot chart, create the below graph
How can we export log files to Tab file or Kml file? Actix make it very easy
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
27 ACTIX User Manual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
28 ACTIX User Manual
By Actix we can plot DT directions
It’s very easy to convert DT results to Histogram using Actix!!
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
29 ACTIX User Manual
How Can We Generate KPIs Report By Actix? From Analysis..
UMTS Drive Test Analysis
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
30 ACTIX User Manual
The O/P will be...
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
31 ACTIX User Manual
UMTS Call Statistics
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
32 ACTIX User Manual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
33 ACTIX User Manual
The O/P will be...
UMTS Call Setup Analysis
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
34 ACTIX User Manual
The O/P will be...
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
35 ACTIX User Manual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
36 ACTIX User Manual
New engineering process >> Spotlight
Create new project
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
37 ACTIX User Manual
Select cell ref
Add log files
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
38 ACTIX User Manual
GSM Spotlight Report
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
39 ACTIX User Manual
The below is the O/P report …
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
40 ACTIX User Manual
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
41 ACTIX User Manual
Event Explorer
The Event Explorer provides a detailed analysis of critical failure events such as Call Drops and Call Setup Failures.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
42 ACTIX User Manual
Ex: We need to analyze the below dropped call
Nice……the below is the dropped call analysis it’s very easy way …
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
43 ACTIX User Manual
Using Filters
Really …..It’s very good feature…..It enable us to filter on bad quality spots
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
44 ACTIX User Manual
Attributes
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
45 ACTIX User Manual
Radio Network Analysis Spotlight contains the following Radio Network Analysis:
- Coverage Analysis. - Allows you to perform wide area coverage-based analyses in GSM, it determines the coverage
footprint of cells and identifies - Overshoot against coverage design boundaries.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
46 ACTIX User Manual
The page operates in two modes: Best Server and Where Seen. Changing the mode affects the Rxlev attribute that is displayed on the map. In Best Server mode, the Rxlev when the selected cell was the best server is displayed (note that in this mode, Raquel can be seen). In Where Seen mode, the Rxlev whenever the cell was measured is displayed.
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
47 ACTIX User Manual
Quality Tab:
Distance Tab:
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
48 ACTIX User Manual
The Visualization tab:
There is a good feature for detecting cross sectors. It indicates % of samples >180 degree beam width.
Ex:
Drive Test From A to Z
By: Ahmed Omar Abd El-Badea
49 ACTIX User Manual
Also, we can use Filters and attributes as shown before…….