+ All Categories
Home > Documents > 31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant...

31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant...

Date post: 04-Jul-2019
Category:
Upload: vukien
View: 212 times
Download: 0 times
Share this document with a friend
4
ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition S ystems 3 Programmable Device Servers (Serial-to-Ethernet) DS-700 Series Serial-To-Ethernet Device Servers 3-3-1 3 CF Virtual COM on Windows NT 4.0, 2000/XP/2003 and High Performance Device Server Features System Specifications Incorporate Serial Devices in an Ethernet network "Virtual COM" Extend COM Ports Watchdog Timer suitable for use in harsh environments Power Reverse Polarity Protection Serial Port +/-4 kV ESD Protection Circuit RoHS Compliant with no Halogen Built-in High Performance MiniOS7 from ICP DAS 10/100 Base-TX, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator) PPDS-712-MTCP supports Modbus/TCP and Modbus/RTU PPDS-712-MTCP supports PoE (IEEE 802.3af, Class 1) Low power consumption Palm-Size with DIN-Rail Mounting Made from fire retardant materials (UL94-V0 Level) ) Male DB-9 Connector RS-232 Introduction The DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application. The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation. The DS-700 is a non-programmable device server, while the PPDS-700-MTCP is a programmable product. The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. The PPDS-700-MTCP also works as a Modbus/TCP to Modbus/RTU gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol. Serial-to-Ethernet Device Server with 1 RS-232 port DS-712 PPDS-712-MTCP Mechanical Flash ROM: 512 KB 512 KB RS-232 (TxD, RxD, RTS, CTS, GND) CPU 80186, 80 MHz or compatible DS-712 10/100 Base-TX, RJ-45 port (Auto-negotiating, SRAM Yes EEPROM 16 KB; Data retention: 40 years Built-in Flash Memory 7, 8: for COM1 auto MDI/MDI-X, LED indicator) Parity Data Bit None, Even, Odd, Mark, Space Baud Rate Watchdog Timer 1: for COM1 115200 bps max. Stop Bit Installation Dimensions Flammability DIN-Rail or Wall mounting 72 mm x 118 mm x 35 mm (W x H x D) L1 Run (Red) Fire Retardant Materials (UL94-V0 Level) L3 L2 10/100M (Orange) Link/Act (Red) Power Consumption Supply Voltage Required Protection 2.0 W +12 VDC ~ +48 VDC (non-regulated) PoE or +12 VDC ~ +48 VDC (non-regulated) Power Reverse Polarity Protection Environment Temperature Storage Operating Temperature Humidity 5 ~ 90% RH, non-condensing -40 °C ~ +80 °C -25 °C ~ +75 °C CPU Models Communication Interface COM Port Formats LED Indicators PPDS-712-MTCP Non- isolated COM1 Ethernet Power PoE - IEEE 802.3af PoE - Green 2.2 W DS-712/PPDS-712-MTCP Applications Factory, Building and Home Automation NS-208 NS-205PSE Ethernet PoE PC + VxComm PDS-700 (IP-1) 7000 #01 Power Supply COM2 COM1 COM2 COM1 ... 7000 #FF COM3 COM4 PPDS-700-MTCP (IP-n) 7000 #01 ... 7000 #FF COM254 COM255 3.3. DS-700 Serial-to Ethernet Device Servers
Transcript
Page 1: 31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet

ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

3

Programm

able Device Servers (Serial-to-Ethernet)

DS-700 Series

Serial-To-Ethernet Device Servers

3-3-1

3

CF

Virtual COM on Windows NT 4.0, 2000/XP/2003 and

High Performance Device Server

Features

System Specifications

Incorporate Serial Devices in an Ethernet network

"Virtual COM" Extend COM Ports

Watchdog Timer suitable for use in harsh environments

Power Reverse Polarity Protection Serial Port +/-4 kV ESD Protection Circuit

RoHS Compliant with no Halogen Built-in High Performance MiniOS7 from ICP DAS

10/100 Base-TX, RJ-45 Port

(Auto-negotiating, auto MDI/MDI-X, LED indicator) PPDS-712-MTCP supports Modbus/TCP and Modbus/RTU

PPDS-712-MTCP supports PoE (IEEE 802.3af, Class 1)Low power consumption

Palm-Size with DIN-Rail Mounting

Made from fire retardant materials (UL94-V0 Level) )

Male DB-9 Connector

RS-232

IntroductionThe DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application.

The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation.

The DS-700 is a non-programmable device server, while the PPDS-700-MTCP is a programmable product. The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. The PPDS-700-MTCP also works as a Modbus/TCP to Modbus/RTU gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.

Serial-to-Ethernet Device Server with 1 RS-232 port

DS-712PPDS-712-MTCP

Mechanical

Flash ROM: 512 KB 512 KB

RS-232 (TxD, RxD, RTS, CTS, GND)

CPU 80186, 80 MHz or compatible

DS-712

10/100 Base-TX, RJ-45 port (Auto-negotiating,

SRAM

Yes

EEPROM 16 KB; Data retention: 40 years Built-in

Flash Memory

7, 8: for COM1

auto MDI/MDI-X, LED indicator)

Parity

Data Bit

None, Even, Odd, Mark, Space

Baud Rate

Watchdog Timer

1: for COM1

115200 bps max.Stop Bit

InstallationDimensions Flammability

DIN-Rail or Wall mounting72 mm x 118 mm x 35 mm (W x H x D)

L1 Run (Red)

Fire Retardant Materials (UL94-V0 Level)

L3 L2

10/100M (Orange) Link/Act (Red)

Power ConsumptionSupply VoltageRequiredProtection

2.0 W

+12 VDC ~ +48 VDC

(non-regulated) PoE or +12 VDC ~ +48 VDC

(non-regulated)

Power Reverse Polarity Protection

Environment

TemperatureStorage

OperatingTemperature

Humidity 5 ~ 90% RH, non-condensing

-40 °C ~ +80 °C

-25 °C ~ +75 °C

CPUModels

Communication Interface

COM Port Formats

LED Indicators

PPDS-712-MTCP

Non-isolated COM1

Ethernet

Power

PoE - IEEE 802.3af

PoE - Green

2.2 W

DS-712/PPD

S-712-MT

CP

ApplicationsFactory, Building and Home Automation

NS-208

NS-205PSE

Ethernet

PoE

PC + VxComm

PDS-700(IP-1) 7000 #01Power Supply

COM2

COM1

COM2

COM1

...

7000 #FF

COM3

COM4

PPDS-700-MTCP(IP-n) 7000 #01

...

7000 #FF

COM254

COM255

3.3. DS-700 Serial-to Ethernet Device Servers

31 DS-712_PPDS-712-1.ai 2009/5/7 ¤W¤È 08:57:25

Page 2: 31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet

Website: http://www.icpdas.com E-mail: [email protected] 3-3-2

Industrial Communication Products

3

Programm

able Device Servers (Serial-to-Ethernet)

3

CF

Pin Assignments

09 (B)GND

E1

01 N/A02 N/A03 N/A04 N/A05 INIT*06 N/A07 N/A

PinAssignment

Terminal No.

08 (R)+Vs

Device Server with 1 RS-232 port (RoHS)DS-712 CRProgrammable Device Server with PoE, Modbus/TCP and 1 RS-232 port (RoHS)PPDS-712-MTCP CR

I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header DN-09-2F

Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1.0 m)

Ordering Information

GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply

MDR-20-24 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting

DIN-KA52F-48 48 VDC/0.52 A, 25 W Power Supply with Din-Rail MountingCA-0915 9-Pin Male-Female D-Sub Cable, 1.5 m Cable

NS-205 CR Unmanaged 5-port Industrial Ethernet Switch (RoHS)

NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)

Accessories

06 --01

0504

03

02

09 --08 CTS

07 RTS

PinAssign-ment

PinAssign-ment

Terminal No.

COM1: Male DB-9 Connector

--

GND--

TxD

RxD

Wiring3-wire RS-232 Wiring

RS-232 Master RS-232 Device

TxDRxDGND

RxDTxDGND

Dimensions (Unit: mm)

Front View Bottom View

Top View

35

7232.91

56.06

Back View

35.4056.0

118.0

Side View

2-SCREWM3

31.50

Din-Rail Mounting Bracket

39.50

35

DS-700 Series

DS-712/PPD

S-712-MT

CP

COM1(RS-232)

(R)V

s+

(B)G

ND

IN1

IN2

IN4

IN5

91

E1

IN3

IN0

IN.C

OM

23 10

N/A

N/A

RL0

NO

RL0

COM

RL1

NO

RL1

COM

RL2

NO

RL2

COM

RL3

NO

RL3

COM

RL4

NO

RL4

COM

RL5

NO

RL5

COM

0901E1

DS-712

COM1(RS-232)

(R)V

s+

(B)G

ND

IN1

IN2

IN4

IN5

91

E1

IN3

IN0

IN.C

OM

23 10

N/A

N/A

RL0

NO

RL0

COM

RL1

NO

RL1

COM

RL2

NO

RL2

COM

RL3

NO

RL3

COM

RL4

NO

RL4

COM

RL5

NO

RL5

COM

0901(PoE)E1

PPDS-712-MTCPL2

L1

L3

L2

L1

L3

32 DS-712_PPDS-712-2.ai 2009/5/7 下午 11:51:36

Page 3: 31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet

ICP DAS CO., LTD Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems

3

Programm

able Device Servers (Serial-to-Ethernet)

Serial-To-Ethernet Device Servers

3-3-3

3

CF

Virtual COM on Windows NT 4.0, 2000/XP/2003 and

High Performance Device Server

Features

System Specifications

Incorporate Serial Devices in an Ethernet network

"Virtual COM" extends PC COM ports

Watchdog Timer suitable for use in harsh environments

Power Reverse Polarity Protection Serial Port +/-4 kV ESD Protection Circuit

Self-Tuner ASIC Controller on the RS-485 Port RoHS Compliant with no Halogen

Built-in High Performance MiniOS7 from ICP DAS

10/100 Base-TX, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator)

PPDS-715-MTCP supports Modbus/TCP and Modbus/RTU

/ ,

Palm-Size with DIN-Rail Mounting

Low power consumption

Made from fire retardant materials (UL94-V0 Level)

RS-422/485

PPDS-715-MTCP supports PoE (IEEE 802.3af, Class 1)

DS-700 Series

DS-715/PPD

S-715-MT

CP

Serial-to-Ethernet Device Server with 1 RS-422/RS-485 port

DS-715PPDS-715-MTCP

Mechanical

Flash ROM: 512 KB 512 KB

CPU 80186, 80 MHz or compatible

DS-715

10/100 Base-TX, RJ-45 port (Auto-negotiating,

SRAM

Yes

EEPROM 16 KB; Data retention: 40 years

RS-422 (TxD+, TxD-, RxD+, RxD-) RS-485 (D2+,D2-)

Built-in

Flash Memory

7, 8: for COM1

auto MDI/MDI-X, LED indicator)

Parity

Data Bit

None, Even, Odd, Mark, Space

Baud Rate

Watchdog Timer

1: for COM1

115200 bps max.Stop Bit

InstallationDimensions Flammability

DIN-Rail or Wall mounting72 mm x 124 mm x 35 mm (W x H x D)

L1 Run (Red)

Fire Retardant Materials (UL94-V0 Level)

L3 L2

10/100M (Orange) Link/Act (Red)

Power ConsumptionSupply VoltageRequiredProtection

2.0 W

+12 VDC ~ +48 VDC

(non-regulated) PoE or +12 VDC ~ +48 VDC

(non-regulated)

Power Reverse Polarity Protection

Environment

TemperatureStorage

OperatingTemperature

Humidity 5 ~ 90% RH, non-condensing

-40 °C ~ +80 °C

-25 °C ~ +75 °C

CPUModels

Communication Interface

COM Port Formats

LED Indicators

PPDS-715-MTCP

Isolated (2000 Vrms) COM1

Ethernet

Power

PoE - IEEE 802.3af

PoE - Green

2.2 W

IntroductionThe DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application.

The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation.

The DS-700 is a non-programmable device server, while the PPDS-700-MTCP is a programmable product. The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. The PPDS-700-MTCP also works as a Modbus/TCP to Modbus/RTU gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.

ApplicationsFactory, Building and Home Automation

NS-208

NS-205PSE

Ethernet

PoE

PC + VxComm

PDS-700(IP-1) 7000 #01Power Supply

COM2

COM1

COM2

COM1

...

7000 #FF

COM3

COM4

PPDS-700-MTCP(IP-n) 7000 #01

...

7000 #FF

COM254

COM255

33 DS-715_PPDS-715-1.ai 2009/5/7 ¤W¤È 08:57:47

Page 4: 31 DS-712 PPDS-712-1 - ICP DAS · The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet

Website: http://www.icpdas.com E-mail: [email protected] 3-3-4

Industrial Communication Products

3

Programm

able Device Servers (Serial-to-Ethernet)

DS-700 Series

DS-715

3

CF

Dimensions (Unit: mm)

Pin Assignments

F.G.Tx+/D+Tx-/D-Rx+Rx-

09 (B)GND

E1

01 N/A02 N/A03 N/A04 N/A05 INIT*06 N/A07 N/A

PinAssignment

Terminal No.

08 (R)+Vs

Device Server with 1 Isolated RS-422/RS-485 port (RoHS)DS-715 CRProgrammable Device Server with PoE, Modbus/TCP and 1 Isolated RS-422/485 port (RoHS) PPDS-715-MTCP CR

Ordering Information

GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply

MDR-20-24 24 VDC/1 A, 24 W Power Supply with DIN-Rail MountingDIN-KA52F-48 48 VDC/0.52 A, 25 W Power Supply with Din-Rail Mounting

NS-205 CR Unmanaged 5-port Industrial Ethernet Switch (RoHS)NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)

Accessories

COM1 (RS-422/485)

Wiring

Front View Back View Bottom View

Top View

35

35.4056.0

124.0

7232.91

56.06

12.4

Din-Rail Mounting Bracket Side View

2-SCREWM3

31.50

39.50

35

(R)V

s+

(B)G

ND

IN1

IN2

IN4

IN5

91

E1

IN3

IN0

IN.C

OM

23 10

N/A

N/A

RL0

NO

RL0

COM

RL1

NO

RL1

COM

RL2

NO

RL2

COM

RL3

NO

RL3

COM

RL4

NO

RL4

COM

RL5

NO

RL5

COM

0901E1

DS-715

COM1(RS-422/485)

(R)V

s+

(B)G

ND

IN1

IN2

IN4

IN5

91

E1

IN3

IN0

IN.C

OM

23 10

N/A

N/A

RL0

NO

RL0

COM

RL1

NO

RL1

COM

RL2

NO

RL2

COM

RL3

NO

RL3

COM

RL4

NO

RL4

COM

RL5

NO

RL5

COM

0901(PoE)E1

PPDS-715-MTCP

COM1(RS-422/485)

F.G. Rx-F.G. Rx-

L2

L1

L3

L2

L1

L3

2-wireRS-485 Wiring

RS-485 Master

2-wire Only Device Twisted Pair Wiring plus Ground

Device 1 Device 3Device 2

DAT

A+(B

)

DAT

A-(A

)

GN

D

DAT

A+(B

)

DAT

A-(A

)

GN

D

DAT

A+(B

)

DAT

A-(A

)

GN

D

DATA+(B)DATA-(A)GND

4-wire RS-422 Wiring

RS-422 Master RS-422 Device

RxD+(B)RxD-(A)TxD+(B)TxD-(A)GND

TxD+(B)TxD-(A)RxD+(B)RxD-(A)GND

34 DS-715_PPDS-715-2.ai 2009/5/8 上午 12:03:33


Recommended