3240E Skid Steer

8/3/2019 3240E Skid Steer

1/50

1

INTRODUCING E-Series 3640E / 4240E

PRODUCT FEATURES AND SPECIFICATIONS


2/50

2

NEW AND IMPROVED COMPACT-SIZE SKID

LOADERS WITH EXCEPTIONAL POWER, EXCELLENT

OPERATING LOAD RATINGS, LIFTING HEIGHTS AND

PERFORMANCE, AND VERY GOOD HYDRAULIC

CAPABILITIES FOR ATTACHMENT PERFORMANCE.

INTRODUCING E-Series 3640E / 4240E


3/50

3

NEW E-Series 3640E / 4240E

New model 3640E replaces the 3635, and new model 4240E replacesthe 3935.

Tier II emissions-certified Yanmar TNV-Series diesel engines

3640E - 35 hp 3-cylinder

4240E - 46 hp 4-cylinder

Higher SAE Rated Operating Load on the 4240E

3640E remains 1,050 lbs. (476 kg) or 1,175 lbs. ( 532 kg)with optional counterweight (factory or field installed)

4240E 1,350 lbs. (612 kg) or 1,475 lbs. (669 kg) with optionalcounterweight (factory or field installed)

Higher auxiliary hydraulic flows

3640E 14.5 gpm (55 L/min)

4240E 16.5 gpm (62 L/min)

MODEL FEATURES


4/50

4


NEW FEATURES

New 4240E has 9 more horsepower and is now a 4-cylinder engine;

higher lift capacity than previous 3935.

New 3640E is lighter weight for easier transport, better performance,less tire wear and easier turning. Unit now available as narrow as 48inches wide.

Improved rear door with more robust hinges and deeper recessed

taillights for improved protection. Improved tilt cylinders with stronger design, without cushioning.

New 4240E 8-bolt axles standard (uses common tires from 4640E).

Heavier axle seals on both models; guard plates are no longer needed.

Increased strength axle housings with additional support structure tobase chassis.

New steel fuel tanks higher capacities.


5/50

5


New engine cover designed to open independently of rear door.

Improved strength All-Tach quick-attach system.

New air cleaner and hydraulic filter systems (hydraulic filter is acommon part already in service parts system).

Base units now structured without hydraulic self-leveling orfenders available as factory or field options.

Improved drive controls with reduced control efforts approximately25% less effort for less fatigue in driving and turning the loader.

New optional sound package available to reduce operator noise levels.

New standardized ignition switch and key (same as other newE-Series loaders).

New style rearview mirror option (same as other new E-Series).

NEW FEATURES


6/50

6


Common ROPS/FOPS enclosure, Level II-certified. Compact, yetgood operator space, comfort and protection.

Smooth-line appearance main chassis with eye appeal modern product graphics for good overall appearance.

Gun metal" gray color, common with all skid loader and compacttrack loader models.

Easy-to-use entry/exit handholds inside andoutside of ROPS/FOPS for safe, easy entry

and exit from the operators compartment.

New gray-colored, high-back cushion seat is

standard equipment; deluxe, gray-coloredfull-suspension seat is optional.

Seat belt adjustable and retractable.

FEATURES


7/50

7


FEATURES

Top and rear windows to prevent dirt and rain entry from top andrear areas of ROPS, and to lower operator noise levels.

New 4240E larger engine radiator and hydraulic oil cooler for

increased engine and hydraulic oil cooling.

Control options for operator preference Hands-only Gehl T-Baror Hand/foot controls.

Operator restraint bar with armrests safety for operator, plusadded comfort.

Instrumentation simple eye-level, right side instrumentation forquick monitoring. Panel is angled for better operator viewing.

Headliner and acoustic material interior standard equipment.


8/50

8


Operational lights 2 front, 2 rear, 2 tail lights.

All-Tach attachment mounting system (universal-style quick-attach).

Powerview lift arm high-strength, radial-lift design provides for

excellent side visibility. Hydraulic line protection built into lift arm

structure. Hydraloc System safety lockout system.

Zero-maintenance axles no need for adjustments or lubrication.

Manually-controlled hydrostatic drive.

Dual hydraulic lift and tilt cylinders with NitroSteel cylinder rods.

FEATURES


9/50

9


1050 lbs. (476 kg) Rated Operating Load (SAE)

[1175 lbs. (532 kg) with optional counterweight]

35 hp (26 kW) diesel engine 3-cylinder

Wheelbase 34.5 inches (876 mm)

High lift height 108 inches (2746 mm)

ROPS/FOPS Level II with comfortable seat, operator restraint bar

Auxiliary hydraulics 14.5 gpm (55 L/min) flow

KEY FEATURES / SPECIFICATIONS


10/50

10


1350 lbs. (612 kg) Rated Operating Load (SAE)[1475 lbs. (669 kg) with optional counterweight]

46 hp (34 kW) diesel engine 4-cylinder

Wheelbase 36.7 inches (932 mm)

High lift height 110 inches (2794 mm)

ROPS/FOPS Level II with

comfortable seat, operator restraint bar

Auxiliary hydraulics 16.5 gpm

(62 L/min) flow

KEY FEATURES / SPECIFICATIONS


11/50

11


FEATURES - Chassis Wheelbase: 3640E 34.5 in. (876 mm)

4240E 36.7 in. (932 mm)

Fuel tank capacity: 3640E 10.3 gal. (38.9 L)4240E 12.4 gal. (46.9 L)

Chaincase oil drain, fill and check ports.

Hydraulic oil reservoir located on left, rear section of chassis. Simplefiller cap with built-in dipstick. Steel tank within the steel chassis with

high capacity and better heat dissipation than plastic.

Stability excellent weight distribution front-to-rear.

High commonality of parts between 3640E and 4240E.

Fenders optional on both 3640E and 4240E.


12/50

12


ROPS/FOPS Enclosure /

Operator Environment

Excellent visibility Sturdy ROPS/FOPS provides protection, yet

allows a wide-open view to the attachment and surrounding work

areas. ROPS/FOPS is Level II certified for even more operator

protection in the event of objects falling onto the ROPS/ FOPS

included as standard equipment.

Optional front cab door provides wiper/washer and gas-spring

assist to open door, and a sensor to lock out lift arm and bucketfunctions when door is open. Optional sliding side windows front

sections slide rearward. Optional heater/defroster factory or field

installed. New complete cab enclosure has a single stock order

number for a complete factory-installed cab package.

Safety glass rear window for lower operator sound levels, keeps

out dirt, debris and rain; and serves as emergency rear exit.

FEATURES -


13/50

13




Handholds on outside and inside of ROPS/FOPS to assist and provide

for easier entry/exit of the operators compartment. Steel, slip-resistant

step design, located on lift arm, also protects tilt cylinder hydraulic lines.

New gray-colored, high-back, cushion seat is standard. Optional new

gray-colored, high-back full-suspension seat allows the operator to

adjust for leg room, and the suspension according to the operators

weight (same seats from other new E-Series loaders). Two-inch wide

adjustable and retractable seat belt is standard; three-inch belt is opt.

Operator restraint bar The restraint bar is an additional restraining

device (in addition to the seat belt) and a comfortable armrest. When in

the raised position, the restraint bar automatically engages the brakes,

and locks the lift arm, attachment movement, and auxiliary hydraulics.

FEATURES -


14/50

14




Precision controls Customer choice of: Gehl T-Bar hands-only,

or Hand/foot with mechanical auxiliary hydraulic controls. New

low-effort design controls speed and direction control effortsreduced by approximately 25%.

T-Bar hands-only controls are very operator-friendly and leave

plenty of room for the operators feet. This control option includesa foot throttle as standard. Auxiliary hydraulics are controlled with

operators left foot. Hand/foot controls operate with two-handles

for drive/steering control, and two foot pedals for lift and tilt

functions. Right control handle moves inward/outward for auxiliaryhydraulic control.

FEATURES -


15/50

15




Eye-level instrumentation Simple, easy-to-view/easy-to-read

instrumentation at eye level on the right side of the ROPS/FOPS

for monitoring loader system functions. Hourmeter, fuel andtemperature gauges provide for quick readings.

Warning lamp indicators for engine and hydraulic

temperature, low oil pressure and battery charge.

Panel includes:

Parking brake switch with brake indicator lamp

Switch for pre-heat for engine starting in colder

conditions

multi-position light switch

circuit breakers

FEATURES -


16/50

16




Mounting holes for optional rearview mirrors incorporated into all

ROPS/FOPS (same mirror as used in other new E-Series loaders).

Compact-size Operator's Manual and sealed manual storagecompartment.

Each loader supplied with:

Operators Manual

Parts Manual

Safety Manual

Attachments Guide

Low overall ROPS/FOPS height 70.3 inches (1786 mm) on 3640E with standard 8.50 x 15 HD tires

71.9 inches (1826 mm) on 4240E with standard 10.00 x 16.5 HD tires

FEATURES -


17/50

17

NEW E-Series 3640E / 4240E FEATURES Lift Arm

Rated Operating Loads increased: 4240E model - 1,350 lbs. (612 kg)

rating - an increase of 90 pounds over 3935 [3640E model retains

1,050 lbs. (476 kg) rating (same as 3635)].

Lift arm support device, in contrasting red color per ISO standard,

provided for easy engagement on extended hydraulic lift cylinder

when lift arm is raised for maintenance or service.

Most pivot pins on lift arm and hydraulic

cylinders have non-greaseable

bushings and utilize hardened steel

pins. Tilt cylinder rod ends and

All-Tach system have easy-

access grease fittings to ensure

continued lubrication in these areas.


18/50

18

NEW E-Series 3640E / 4240E FEATURES Lift Arm

Four-point support Dual tilt cylinders and lift arm stop blocks

mounted on front of main frame spread digging forces evenly acrossthe chassis. Bucket corner load stresses are reduced, so the lift arms

and quick-attach bracket are stressed less.

Hydraulic cylinders featuring NitroSteel black-appearance,

hardened cylinder rods. NitroSteel provides superior corrosionresistance, improved wear resistance, dent resistance and increased

service life. Dual tilt cylinders provide strong breakout forces.

Hydraulic self-leveling Optional feature on new 3640E / 4240Eloaders can be ordered as factory-installed option or field-installed

option. When raising the lift arm, a pressure and flow-sensitive valvedirects flow to the bucket cylinders, keeping the attachment level

during the lifting motion. Operators can concentrate on maneuveringand lifting for fast cycle times while maintaining the load in the bucketor on pallet forks. Leveling can be manually shutoff or adjusted tooperator preference.


19/50

19

NEW E-Series 3640E / 4240E FEATURES - Quick-Attach System

All-Tach quick-attach system permits quick interchange of

universal-type compatible attachments to increase both versatility

and productivity. The All-Tach system provides easy mounting of all

All-Tach-compatible allied attachments. The 3640E / 4240E feature

dual-lever design for engaging/disengaging the locking mechanism.

Attachments, through CEAttachments Inc., can readily be installedand used for multi-purpose compact loader duties. Many

attachments already used on larger E-Series loaders can be used on

these new models, within their capacity ratings.

Flat-faced hydraulic couplers, as found on larger E-Series models,

are the same on the new 3640E / 4240E for quick interchangeability.


20/50

20

NEW E-Series 3640E / 4240E FEATURES - Wheel Drives

4240E features new 8-bolt, heavy-duty design axles.

2.0 in. (51 mm) diameter forged steel axles and flanges. Axles areheat-treated on new model 4240E.

Axles are zero-maintenance with sealed axle bearings no need forgreasing or maintaining oil. New heavier seal design providesexcellent sealing to retain grease and avoid dirt, debris and water fromentering, without the need for guard plates.

#80K drive chains with no idlers or adjustments required. This chain-

design is ideal for this drive system application. Chains operate in acontinuous oil bath in sealed chaincases. Design features no internalchain idlers and no external adjustments.

3640E 3640E Axle 4240E Axle/Wheel


21/50

21

NEW E-Series 3640E / 4240E FEATURES - Brakes

Hydraloc brake system

Brakes are applied whenever the restraint bar is in the raised

position, operator is off the seat, or the key switch is turned off.

A manual on/off brake switch on the instrument panel also

activates the brakes.

Brakes are integral within drive motors. Wet-type, multiple-disc

SAHR (spring-applied/hydraulic release) brakes stop motor shaft

upon activation. Brake system requires zero maintenance.


22/50

22

NEW E-Series 3640E / 4240E FEATURES - Rear Service Access

Large engine cover is hinged and controlled by gas spring, to

assist lifting and holding in place, and allows easy return of door

to closed/operating position.

Rear door opens easily on its hinge on the right side, whichallows for full access to engine oil dipstick, oil filler cap, air

cleaner, battery and other routine inspection and maintenance

points. (Other maintenance is performed with ROPS/FOPS in

raised position.)

Anti-vandalism protection with ability to lock rear door andengine cover by use of a single customer-supplied padlock.A separate padlock can also be applied to secure fuel cap.

Integrated, twin rear halogen work lights and tail lights standard equipment.


23/50

23

NEW E-Series 3640E / 4240E FEATURES - Engines

Powerful, TNV-Series Yanmar diesels Tier IIemissions-certified. Engines are direct-injected, liquid-cooled designs:

3640E

3-cylinder naturally-aspirated with 35 hp(26 kW) @ 2600 rpm and 80 lb.-ft.(108 Nm) peak torque.

4240E

4-cylinder naturally-aspirated with 46 hp

(34 kW) @ 2600 rpm and 103 lb.-ft.

(140 Nm) peak torque.

Easy access to dipstick and oil fill. Initial oil and filter change required

at 50 hours; 500-hour change interval thereafter. (More frequent inmore harsh applications.)


24/50

24

NEW E-Series 3640E / 4240E FEATURES Engines / Muffler

Easy access to air cleaner dual air filter elements.

Engine pre-heat (intake manifold heater system) controlled by

rocker switch. Pre-heat system activated when ignition key turned toon position, and pre-heat switch is held on (for time perioddependent on outside temperature).

Excellent cold-weather starting characteristics. Optional engine

block heater available for extreme cold weather starting assistance.

Muffler

3640E Muffler is mounted to engine exhaust manifold and is spark-

arrestor type.

4240E Muffler is mounted to chassis and has stainless steel flexpipe from exhaust manifold to inlet pipe to allow for flexing and tominimize pipe failures. Muffler is spark-arrestor type.


25/50

25

NEW E-Series 3640E / 4240E FEATURES - Hydraulic System

Standard-flow auxiliary hydraulics with flat-faced hydraulic couplers

standard on both model loaders. Couplers are in a convenient

location on the upper, left side of the Powerviewlift arm, allowing

for quick coupling/uncoupling of attachment hydraulic hoses.

(Same couplers as used on other E-Series models.)

Hydraulic flow rate is adjusted by varying engine speed, and

maximized at full throttle. Theoretical auxiliary hydraulic flow 14.5 gpm (55 L/min) on 3640E and 16.5 gpm (62 L/min) on 4240E.

Main system hydraulic relief pressure is 2750 PSI (190 bar).

Auxiliary hydraulics controls: Left foot pedal on T-Bar hands-only

control units, and left/right actuation of right drive lever handle on

Hand/foot control units.


26/50

26

NEW E-Series 3640E / 4240E FEATURES - Hydraulic System

Direct-drive hydrostatic transmission pump mounted directly to

the engine crankshaft through a special coupler connection 100%

efficient. High-capacity, gear pump provides efficient, high

pressure flow to loader and attachment. Drive mechanism requiresno adjustment and no maintenance.

Large capacity steel hydraulic reservoir located in the left, rear of

the loader chassis. Large volume results in the oil circulating

through the system less frequently, resulting in cooler oil and

component temperatures to provide optimum performance and

longer life.

Hydraulic oil filter is located at center rear, in the enginecompartment. New filter base has built-in restriction indicator to

show when filter replacement is required.


27/50

27

NEW E-Series 3640E / 4240E FEATURES - Electrical System

High-quality ignition switch and key (same as on other E-Series).

Battery access, at right rear of loader, just inside the rear door.

Battery can be easily accessed when required. Battery disconnectswitch available as parts option.

All sealed and protected connectors.

Simple, reliable-design instrument panel is hard-wired for easy

servicing if required.

Wire harnesses include additional wiring for simple connection ofoptions when added to units in field.


28/50

28

NEW E-Series 3640E / 4240E FEATURES - Buckets

All-Tach (universal-type) quick-attach design mounting standard equipment.

Slip-resistant, steel safety tread designed for dirt/debris to fallthrough step.

Improved strength through F.E.A. (computer) design.

New 55-inch (1404 mm) and 61-inch (1539 mm) dirt/construction

buckets with high-back spill guard rear design to allow bettercontainment of material in buckets.

Select buckets feature a bolt-on replaceable cutting edge asoptional equipment. (Add-on bolt-on edges, or weld-on edges

also available through Service Parts Department. Tooth barsavailable through CEAttachments Inc.)

Bucket options available: Dirt/construction buckets withspillguards built in, utility, snow buckets.


29/50

29

NEW E-Series 3640E / 4240E FEATURES - Specifications

1 Operating load (capacity) rated for 3640E with 55 in. (1397 mm) - 10.5 ft.3 (0.3 m3) dirt/construction bucket;4240E with 61 in. (1550 mm) - 11.7 ft.3 (0.3 m3) dirt/construction bucket, in accordance with SAE J818.

2 3640E equipped with 27 x 8.50 x 15 tires; 4240E equipped with 10.00 x 16.5 tires.

Loader Specifications 3640E 4240E

Operating Weight2

4000 lbs. (1814 kg) 4600 lbs. (2087 kg)

Shipping Weight2

3515 lbs. (1594 kg) 4065 lbs. (1844 kg)

Rated Operating Load1

(capacity) 1050 lbs. (476 kg) 1350 lbs. (612 kg)

Rated Load w/Opt. Weight Kit1

1175 lbs. (532 kg) 1475 lbs. (669 kg)

Engine

Make Yanmar Yanmar

Model 3TNV88-XMS2 4TNV88-XMS2

Displacement 100 in.3

(1.64 L) 133 in.3

(2.19 L)

Power (net) 35 hp (26 kW) @ 2600 rpm 46 hp (34 kW) @ 2600 rpm

Peak Torque 80 ft.-lb. (108 Nm) 103 ft.-lb. (140 Nm)@ 1200 rpm @ 1200 rpm

Hydraulic System (theoretical)

Main Hydraulic System Pressure 2750 psi (190 bar) 2750 psi (190 bar)

Auxiliary Hydraulic Flow Rating 14.5 gpm (55 L/min) 16.5 gpm (62 L/min)


30/50

30

NEW E-Series 3640E / 4240E FEATURES - Specifications

Loader Specifications (Cont.) 3640E 4240E

Electrical

Battery 12-Volt DC, 675 CCA 12-Volt DC, 675 CCA

Starter 2.3 kW 2.5 kW

Alternator 40 amp. 40 amp.

Capacities

Chaincase (each side) 8.0 U.S. qts. (7.6 L) 8.0 U.S. qts. (7.6 L)

Crankcase 7.6 U.S. qts. (7.2 L) 9.1 U.S. qts. (8.6 L)

Fuel Tank 10.3 U.S. gal. (38.9 L) 12.4 U.S. gal. (46.9 L)

Hydraulic Reservoir 8 U.S. gal. (30.3 L) 8 U.S. gal. (30.3 L)

Sound Levels (with Deluxe Sound Kit)

Sound Pressure (Operator) 85 dB(A) 85 dB(A)

Sound Power (Environmental) 101 dB(A) 101 dB(A)


31/50

31

NEW E-Series 3640E / 4240E FEATURES - Standard Equipment

Yanmar Liquid-cooled Diesel Engine

Choice of Two Control Types: T-Bar or Hand/Foot

All-Tach Attachment System (Universal-Type) Manually Controlled Hydrostatic Drive

PowerviewLift Arm

Dual Lift/Tilt Cylinders with NitroSteel Cylinder Rods

ROPS/FOPS-Level II-Certified Overhead Guard Top and Rear Windows ROPS/FOPS

Entry/Exit Handholds

Headliner and Acoustical Material Interior

Adjustable Standard Seat Operator Restraint Bar with Armrests

Foot (T-Bar Only) and Hand Throttle


32/50

32


Eye-level, Right-side Instrument Panel:

Fuel Gauge

Engine Temperature Gauge

Hourmeter Seatbelt Indicator Lamp and Buzzer

Warning Lamps and Buzzer Engine and Hydraulic OilTemperature

Battery Charge Indicator Lamp

Low Oil Pressure Lamp and Buzzer

12-volt Accessory Plug

Dual-element Air Cleaner with Visual Indicator

Visual Hydraulic Filter Indicator

Independent Hydraulic Reservoir and Hydraulic Oil Cooler

Engine Intake Air Pre-heater Starting Assist (Manual)


33/50

33


Adjustable, Retractable Seatbelt

Lift Arm Support Device

Hydraloc System Brakes and Interlock for Starter, Lift/TiltCylinders, Auxiliary Hydraulics and Wheel Drives

Dual Front and Rear Work Lights

Removable Belly Plate and Access Cover, Front Frame Cleanout Area

Anti-Vandalism Lock Provisions

Spark-Arrestor Muffler

Front Auxiliary Hydraulics with 3/4 inch Flat-Faced Couplers

Number 80K Drive Chains

Zero Maintenance Axles

Operators Manual and Safety Manual English, Parts Manual


34/50

34

NEW E-Series 3640E / 4240E FEATURES - Optional

Horn

Deluxe Sound Package

Interior Dome Light

Lift Kit Single-point

Lift Kit Four-point

Battery Disconnect Switch

Fenders

Self-Leveling Hydraulic Lift Action

Audible Back-up Alarm Engine Block Heater

Suspension Seat

Cab Enclosure Complete:

Door

Side Windows Door Interlock

Heater-Defroster

Dome Light


35/50

35

NEW E-Series 3640E / 4240E FEATURES - Optional

Cab Door with Wiper/Washer

Sliding Side Windows/Half-glass Side Windows

Heater/Defroster - Kit

3-inch Wide Seatbelt (for where required by law) Rearview Mirror

Engine Auto-Shutdown System

Centrifugal Air Pre-Cleaner

Strobe Light

Impact-resistant Door

Rear Counterweight (also acts as bumper and hitch)

Bucket Bolt-on Cutting Edge

Diesel Engine Exhaust Purifier (parts)

Paint Non-standard and Custom Hydraulic Coupler Kit

Manual Operators Spanish

Manual Safety Spanish


36/50

36

NEW E-Series 3640E / 4240E Dimensional Specifications

10.5 ft3 (0.3 m3) - 55 in. (1404 mm)Bucket w/27 x 8.5 x 15 HD Tires

3640E inches mmA Overall Operation Height Fully Raised 139.6 3546B Height to Hinge Pin Fully Raised 108.1 2746

C Overall Height to ROPS 70.3 1786

D Ground Clearance to Chassis (BetweenWheels)

6 152

E Overall Length Bucket Down 114 2896

F Overall Length (Less Bucket) 88.9 2258

G Wheelbase 34.5 876

H Dump Reach @ Full Bucket Height 22.8 579

I Rollback at Ground Level 29o

J Dump Angle at Full Height 42o


37/50

37


10.5 ft3 (0.3 m3) - 55 in. (1404 mm)Bucket w/27 x 8.5 x 15 HD Tires

3640E inches mmK Overall Width Less Bucket 48.4 1229

L Bucket Width Overall 55.3 1404

M Clearance Circle Rear 54.1 1374

N Clearance Circle Front (Less Bucket) 44.1 1120

O Clearance Circle Front (With Bucket) 69.4 1763

P Seat to Ground Height 32.6 828Q Rollback Angle at Full Height 99

o

R Dump Height 84.5 2146

S Departure Angle 26o


38/50

38


11.7 ft3 (0.3 m3) - 61 in.(1549 mm) Bucket w/10.00

x 16.5 HD Tires

4240E inches mmA Overall Operation Height Fully Raised 141.1 3584

B Height to Hinge Pin Fully Raised 110 2794

C Overall Height to ROPS 71.9 1826

D Ground Clearance to Chassis(Between Wheels)

8.3 211

E Overall Length Bucket Down 116.2 2952

F Overall Length (Less Bucket) 91.1 2314

G Wheelbase 36.7 932

H Dump Reach @ Full Bucket Height 20.8 528

I Rollback at Ground Level 28o

J Dump Angle at Full Height 42o


39/50

39


11.7 ft3 (0.3 m3) - 61 in.(1549 mm) Bucket w/10.00

x 16.5 HD Tires

4240E inches mmK Overall Width Less Bucket 52.5/58.4 1334/1483

L Bucket Width Overall 60.6 1539

M Clearance Circle Rear 58.4 1484

N Clearance Circle Front (Less Bucket) 43.4 1102

O Clearance Circle Front (With Bucket) 69.2 1758

P Seat to Ground Height 33.6 853

Q Rollback Angle at Full Height 99o

R Dump Height 86.5 2197

S Departure Angle 29o


40/50

40

NEW E-Series 3640E / 4240E Capacities and Ratings

Operating Capacity

Description Weight 3640E 4240E

Dirt/Construction Buckets

1095 lbs.55 in./10.5 ft.3 (1397 mm/0.30 m3) 235 lbs. (107 kg)

(497 kg)

1383 lbs.(627 kg)


(340 kg)

1102 lbs.(500 kg)


(491 kg)

1370 lbs.(621 kg)

Construction with High-back Buckets

1061 lbs.55.5 in./9.5 ft.3 (1410 mm/0.27 m3) 254 lbs. (115 kg)

(481 kg)

1325 lbs.(601 kg)


(422 kg)

1214 lbs.(551 kg)


41/50

41

NEW E-Series 3640E / 4240E Capacities and Ratings

Operating Capacity

Description Weight 3640E 4240E

Utility Buckets1061 lbs.55.5 in./13.5 ft.3 (1410 mm/0.38 m3) 313 lbs. (142 kg)

(481 kg)

1325 lbs.(601 kg)


(375 kg)

1064 lbs.(483 kg)


(361 kg)

1000 lbs.(454 kg)

Earth and Foundry Bucket


(557 kg)

1469 lbs.(666 kg)

Pallet Forks

15.75 in. (400 mm) Forks with 662 lbs.

Backrest (Rating per EN474-3)

470 lbs. (213 kg)

(300 kg)

838 lbs.

(380 kg)19.68 in. (500 mm) Forks with 616 lbs.

Backrest (Rating per EN474-3)

470 lbs. (213 kg)

(279 kg)

775 lbs.(352 kg)

24 in. (670 mm) Forks with 575 lbs.

Backrest (Rating per SAE 1197)

470 lbs. (213 kg)

(261 kg)

526 lbs.(239 kg)


42/50

42

NEW E-Series 3640E / 4240E Quick Specs

LOADER MODEL

ENGINE MAKE

ENGINE MODEL

RATED HP (kW) @ 2600 rpm 35 (26) 46 (34)

DISPLACEMENT - cu. in. (L) 100 (1.6) 133 (2.2)

FUEL CAPACITY - gal. (L) 10.3 (39) 12.4 (47)OPERATING WT. - lbs. (kg) - approx. 4000 (1814) 4600 (2087)

RATED OPERATING LOAD (SAE) - lbs. (kg) 1050 (476) 1350 (612)

RATED OP. LOAD w/counterweight - lbs. (kg) 1175 (533) 1475 (669)

TIPPING CAPACITY (SAE) - lbs. (kg) 2100 (953) 2700 (1225)

BREAKOUT FORCE - lbf (kN) 2800 (12.5) 2800 (12.5)

LIFT PIN HEIGHT - in. (mm) 108.0 (2743) 110.0 (2794)

HEIGHT TO TOP OF ROPS - in. (mm) 70.3 (1786) 71.9 (1826)REACH - in. (mm)1 22.8 (579) 22.6 (574)

LENGTH W/CONST. BUCKET - in. (mm) 114 (2896) 116.2 (2951)

WIDTH -- LESS BUCKET (Flotation tire) -in. (mm) 48.4 (1229) 52.5 (1334)

WIDTH -- OVERALL WITH BUCKET - in. (mm) 55 (1397) 61 (1549)

GROUND CLEARANCE - in. (mm) 6 (152) 8.3 (211)

WHEELBASE - in. (mm) 34.5 (876) 36.7 (932)

HYDRAULIC RESERVOIR - gal. (L) 8 (30.3) 8 (30.3)

AUXILIARY HYD. OUTPUT - gpm (L/min) 14.5 (54.9) 16.5 (62.5)

AUXILIARY PRESSURE - psi (bar) 2750 (190) 2750 (190)

TRAVEL SPEED (MAX.) - mph (km/h) 6.8 (13) 6.4 (13)

DRIVE CHAIN

1 3640E - Measurements w ith 55 in. (1404 mm) Dirt/Construction bucket w ith 10.5 cu. ft. (0.3 m3) capacity.

1 4240E - Measurements w ith 61 in. (1549 mm) Dirt/Construction bucket w ith 11.7 cu. ft. (0.33 m3) capacity.

4240E

#80K

Yanmar

#80K

4 TNV 88

3640E

Yanmar

3 TNV 88


43/50

43

NEW E-Series 3640E / 4240E Reference Section


44/50

44

NEW E-Series 3640E / 4240E Quick Features

1050 lbs. (476 kg) Rated Operating 1350 lbs. (612 kg) Rated OperatingLoad (without counterweight) Load (without counterweight)

35 hp (26 kW) Yanmar Diesel Engine 46 hp (34 kW) Yanmar Diesel Engine

14.5 GPM (54.9 L/min) Auxiliary 16.5 GPM (62.5 L/min) Auxiliary

Hydraulic Output -- For Better Hydraulic Output -- For Better

Attachment Productivity Attachment ProductivityFlat-faced auxiliary couplers - (same as Flat-faced auxiliary couplers - (same asother 40E-Series) (No Hi-flow available.) other 40E-Series) (No Hi-flow available.)

No-Maintenance, Direct-Drive Coupler -- No-Maintenance, Direct-Drive Coupler --

Engine-to-Hydro Pumps Engine-to-Hydro Pumps

Two Drive/Hydraulic Control Options: Two Drive/Hydraulic Control Options:

Gehl T-Bar (Hands-Only) Controls Gehl T-Bar (Hands-Only) ControlsHand/Foot Controls Hand/Foot Controls

All-Tach Universal-Type Quick-Attach All-Tach Universal-Type Quick-AttachSystem System

MODEL 3640E

DESIGN FEATURESMODEL 4240E

DESIGN FEATURES


45/50

45

NEW E-Series 3640E / 4240E Quick Features

Ins trumentation - Eye-Level, Ins trumentation - Eye-Level,

Easy-View Fuel and Engine Easy-View Fuel and EngineTemperature Gauges, Hourmeter, Temperature Gauges, Hourmeter,and Warning Lamps and Warning Lamps

Compact Size - As Narrow as 48 in. Compact Size - As Narrow as 55 in.

Low Overall Height - 70.3 in. Low Overall Height - 71.9 in.

Large Swing-Open Rear Door, Tip-Up Large Swing-Open Rear Door, Tip-Up

Engine Cover, Tip-Back ROPS/FOPS Engine Cover, Tip-Back ROPS/FOPSwith Gas-Spring Assis t for Service Ease with Gas-Spring Ass ist for Service Ease

Roomy, Comfortable Operator's Roomy, Comfortable Operator's

Compartment and Seat. Suspension Compartment and Seat. SuspensionSeat Optional. Restraint bar w/Armrests. Seat Optional. Restraint bar w/Armrests.

Powerview

Lift Arm -- Good Side View Powerview

Lift Arm -- Good Side View

Dual, Heavy-Duty Lift and Tilt Cylinders -- Dual, Heavy-Duty Lift and Tilt Cylinders --For Strong Breakout Force. NitroSteel For Strong Breakout Force. NitroSteelCylinder Rods Cylinder Rods

Lift Height = 108 in. (2743 mm) -- For Lift Height = 110 in. (2794 mm) -- ForGood Dump and Reach Action Good Dump and Reach Action

MODEL 3640E

DESIGN FEATURESMODEL 4240E

DESIGN FEATURES


46/50

46

NEW E-Series 3640E / 4240E Maintainability Features

Rear door/engine cover access:

Air filters

Engine oil/hydraulic oil cooler

Engine oil dipstick Engine oil filler cap

Hydraulic oil filler cap/dipstick

Battery

Engine oil filter

Hydraulic oil filter Fuel filter

Under ROPS/FOPS access:

Full ROPS/FOPS tip-back for internal components access.

(ROPS/FOPS is gas-spring assisted for easier tip back andreturn.)

Ease of access for maintenance, cleaning and service.


47/50

47

NEW E-Series 3640E / 4240E Maintainability Features

Chassis:

No chain adjustments. No chain idlers. Fill, check and

drain of chaincases.

Large inspection covers for chaincases.

Access pan plates: Two plates, one front, one rear for easy

removal and easy handling, to allow access and cleanout

under engine and chassis. Front plate for access to

hydraulics; rear plate for access to engine oil drain.

Engine:

Engine requires oil changes/engine oil filter changes only

at 500-hour intervals. (Initial oil change at 50 hours.)

Direct-injection for easier starting and better cooling.


48/50

48

NEW E-Series 3640E / 4240E Serviceability Features

Instrument panel gauges and lamps are individually replaceable.

Unitized drive motor/brake assemblies.

Large chaincase covers for easier access.

Full tip-back ability of ROPS/FOPS enclosure allows for easy accessto internal hydraulic components as needed. Raising and locking oflift arm in full-height position allows for additional repair access as

necessary.

Bushed hydraulic cylinders and pivotswith hardened pins. Limited numberof pivot points require greasing.

Bushings are replaceable.

Easy access to filters.


49/50

49

NEW E-Series 3640E / 4240E Changes From Previous Series

3640E / 4240E 3635 / 3935

Yanmar TNV-Series engines - Tier II-certified Yanmar TNV-Series engines - Tier II-certified

3640E 3-cyl. - NA - 35 hp @ 2600 rpm / 80 ft.-lbs. 3635 3-cyl. - NA - 36 hp @ 3000 rpm / 77 ft.-lbs.

4240E 4-cyl. - NA - 46 hp @ 2600 rpm / 103 ft.-lbs. 3935 3-cyl. - NA - 36 hp @ 3000 rpm / 77 ft.-lbs.

500 hour oil/filter change interval (50 hr. initial) 250 hour oil/filter change interval (50 hr. initial)

Rated operating load

3640E 1050 lbs. (1175 lbs. w/weight kit) 3635 1050 lbs. (1150 lbs. w/weight kit)

4240E 1350 lbs. (1475 lbs. w/weight kit) 3935 1260 lbs. (1360 lbs. w/weight kit)

Operating weight

3640E 4000 lbs. 3635 4400 lbs.

4240E 4600 lbs. 3935 4600 lbs.Dump reach

3640E 22.6 in. 3635 22.8 in.

4240E 22.8 in. 3935 25 in.

Overall length w/ bucket

3640E 114 in. 3635 114 in.

4240E 116 in. 3935 117.9 in.Ground speed

3640E 6.8 mph 3635 7 mph

4240E 6.4 mph 3935 7 mph

(Single-speed drive only) (Single-speed drive only)


50/50

50

NEW E-Series 3640E / 4240E Changes From Previous Series

3640E / 4240E 3635 / 3935

3640/4240 Feat-Spec PPT 11/05 kpm/jh

Auxiliary hydraulic flow

3640E 14.5 gpm 3635 14.4 gpm

4240E 16.5 gpm 3935 14.4 gpm

Fuel tank capacity3640E 10.3 gal. 3635 8.5 gal.

4240E 12.4 gal. 3935 8.5 gal.

Steel tank Plastic tank

Axles3640E 6-bolt HD axle 3935 and 3695 standard 6-bolt axle

(uses same wheel/tires as 3635)4240E 8-bolt HD axle(uses same wheel/tires as 4640)

Hydraulic filtration

4-micron (Finer hydraulic oil filtration) 7-micron

Hydraulic self-leveling

Factory or field opt. Standard eq.

Fenders Factory or field opt. Standard eq.

New ignition switch/key common w/E-Series Switch/key from original 40-Series

Date post:	06-Apr-2018
Category:	Documents
Upload:	rop703406
View:	231 times
Download:	0 times

3240E Skid Steer

Documents