340AJ ARTICULATING BOOM LIFTS Platform • 0.76 m x 1.52 m low mount platform • Multiple function operation • Full proportional drive joystick control with integral thumb steer switch • Full proportional main boom and swing joystick control • Multiple speed control for lower boom, telescope and platform rotate • Selectable creep speed on drive / lift and swing functions • 1.22 m articulating jib • 180 degree powered platform rotator • Platform console machine status light panel 1 • Load sensing system • AC power cable to platform Power & Transmission • Kubata D1105(18.5KW) diesel engine • Engine distress warning /shut down system 2 • Gull wing steel turntable hoods • Swing-out engine tray • Spark arresting type muffler • Control ADE ® (Advanced Design Electronics) System • Hydrostatic drive transmission • Four wheel drive • Horn Functional Equipment & Accessories • 3 degree tilt alarm and indicator light • 9 x 20 foam filled lug tread tyres • Oscillating front axle • Lifting/tie down lugs • Hour meter • Ground control selector switch with key lock • Low fuel engine cut-out • Platform tool tray Available Options • 0.76 m x 1.22 m low mount platform • Side entry with inward swing gate • 13 mm air line to platform • 9 x 20 foam filled non marking tyres • 7 x 18 solid flex tyres • 7 x 18 solid flex non marking tyres • On-board 2,500W generator * • All motion alarm • Alarm package 3 • Light package 4 • Platform workhights • Flashing amber beacon • Plugs & Sockets • Hostile environment package 5 • Catalytic purifier muffler • Corner storage tray 1 Provides indicator lights at platform control console for system distress, low fuel, tilt light, and foot switch status. 2 Low oil pressure and high coolant temperature alarms with shut-down enabled/ disabled by analyser. 3 Includes all-motion alarm and flashing amber beacon. 4 Includes platform mounted work lights and head & tail lights. 5 Includes console cover, boom wipers and cylinder bellows. * Subject to imminent change
• 3 degree tilt alarm and indicator light• 9 x 20 foam filled lug tread tyres• Oscillating front axle• Lifting/tie down lugs• Hour meter• Ground control selector switch with key lock• Low fuel engine cut-out• Platform tool tray
Available Options
• 0.76 m x 1.22 m low mount platform• Side entry with inward swing gate• 13 mm air line to platform• 9 x 20 foam filled non marking tyres• 7 x 18 solid flex tyres• 7 x 18 solid flex non marking tyres• On-board 2,500W generator *• All motion alarm• Alarm package 3
JLG Industries, Inc.1 JLG DriveMcConnellsburg, PA 17233-9533Telephone 717-485-5161Toll-free in US 877-JLG-LIFTFax 717-485-6417www.jlg.comAn Oshkosh Corporation Company
44 ft(13.4 m)
40 ft(12.2 m)
36 ft(11.0 m)
32 ft(9.8 m)
28 ft(8.5 m)
24 ft(7.3 m)
20 ft(6.1 m)
16 ft(4.9 m)
12 ft(3.7 m)
8 ft(2.4 m)
4 ft(1.2 m)
0 ft(0 m)
-4 ft(-1.2 m)
-8 ft(-2.4 m)
8 ft(2.4 m)
12 ft(3.7 m)
16 ft(4.9 m)
24 ft(7.3 m)
20 ft(6.1 m)
-4 ft(-1.2 m)
0 ft(0 m)
4 ft(1.2 m)
Specifi cations
The JLG “1 & 5” WarrantyJLG Industries, Inc. backs its products with its exclusive“1 & 5” Warranty. We provide coverage on all products forone (1) full year, and cover all specified major structuralcomponents for five (5) years. Due to continuous productimprovements, we reserve the right to make specificationand/or equipment changes without prior notification. Thismachine meets or exceeds applicable OSHA Regulationsin 29 CFR 1910.67, 29 CFR 1926.453, ANSI A92.5-2006,and CSA Standard CAN3-B354.2-M82, as originally manufac-tured for intended applications.
Form No.: SS-340AJ-12-20010Part No.: 3131121SR061202Printed in USA
Reach SpecificationsPlatform Height 33 ft 10 in. (10.31 m)Horizontal Reach 19 ft 11 in. (6.06 m)Up and Over Height 17 ft (5.17 m)Swing 355 Degrees Non-ContinuousPlatform Capacity 500 lb (227 kg)Platform Rotator 180 Degrees° HydraulicJib Length 4 ft (1.22 m)Jib Range of Articulation 144 Degrees (+84, -60)
Dimensional DataA. Platform Size 30 x 60 in. (0.76 x 1.22 m)B. Overall Width 6 ft 4 in. (1.93 m)C. Tailswing 2 in. (5.08 cm)D. Stowed Height 6 ft 7 in. (2 m)E. Stowed Length 18 ft 2in. (5.52 m),
13 ft (3.98 m) with Jib StowedF. Wheelbase 6 ft 2 in. (1.87 cm)G. Ground Clearance 10 in. (23.7 cm)Weight* 9,700 lb (4,400 kg)Max. Ground Bearing Pressure 151 psi (10.6 kg/cm2)
Kubota D1105 24.8 hp (18.5 kW)Fuel Tank Capacity 13 gal (498.2 L)Hydraulic Reservoir 20.6 gal (77.9 L)Auxiliary Power 12V DC
* Certain options may increase weight.
Model
340AJARTICULATING BOOM LIFTS
JLG Industries, Inc.1 JLG DriveMcConnellsburg, PA 17233-9533Telephone 717-485-5161Toll-free in US 877-JLG-LIFTFax 717-485-6417www.jlg.comAn Oshkosh Corporation Company
44 ft(13.4 m)
40 ft(12.2 m)
36 ft(11.0 m)
32 ft(9.8 m)
28 ft(8.5 m)
24 ft(7.3 m)
20 ft(6.1 m)
16 ft(4.9 m)
12 ft(3.7 m)
8 ft(2.4 m)
4 ft(1.2 m)
0 ft(0 m)
-4 ft(-1.2 m)
-8 ft(-2.4 m)
8 ft(2.4 m)
12 ft(3.7 m)
16 ft(4.9 m)
24 ft(7.3 m)
20 ft(6.1 m)
-4 ft(-1.2 m)
0 ft(0 m)
4 ft(1.2 m)
Specifi cations
The JLG “1 & 5” WarrantyJLG Industries, Inc. backs its products with its exclusive“1 & 5” Warranty. We provide coverage on all products forone (1) full year, and cover all specified major structuralcomponents for five (5) years. Due to continuous productimprovements, we reserve the right to make specificationand/or equipment changes without prior notification. Thismachine meets or exceeds applicable OSHA Regulationsin 29 CFR 1910.67, 29 CFR 1926.453, ANSI A92.5-2006,and CSA Standard CAN3-B354.2-M82, as originally manufac-tured for intended applications.
Form No.: SS-340AJ-12-20010Part No.: 3131121SR061202Printed in USA
Reach SpecificationsPlatform Height 33 ft 10 in. (10.31 m)Horizontal Reach 19 ft 11 in. (6.06 m)Up and Over Height 17 ft (5.17 m)Swing 355 Degrees Non-ContinuousPlatform Capacity 500 lb (227 kg)Platform Rotator 180 Degrees° HydraulicJib Length 4 ft (1.22 m)Jib Range of Articulation 144 Degrees (+84, -60)
Dimensional DataA. Platform Size 30 x 60 in. (0.76 x 1.22 m)B. Overall Width 6 ft 4 in. (1.93 m)C. Tailswing 2 in. (5.08 cm)D. Stowed Height 6 ft 7 in. (2 m)E. Stowed Length 18 ft 2in. (5.52 m),
13 ft (3.98 m) with Jib StowedF. Wheelbase 6 ft 2 in. (1.87 cm)G. Ground Clearance 10 in. (23.7 cm)Weight* 9,700 lb (4,400 kg)Max. Ground Bearing Pressure 151 psi (10.6 kg/cm2)
Kubota D1105 24.8 hp (18.5 kW)Fuel Tank Capacity 13 gal (498.2 L)Hydraulic Reservoir 20.6 gal (77.9 L)Auxiliary Power 12V DC
* Certain options may increase weight.
Model
340AJARTICULATING BOOM LIFTS
JLG Industries, Inc.1 JLG DriveMcConnellsburg, PA 17233-9533Telephone 717-485-5161Toll-free in US 877-JLG-LIFTFax 717-485-6417www.jlg.comAn Oshkosh Corporation Company
44 ft(13.4 m)
40 ft(12.2 m)
36 ft(11.0 m)
32 ft(9.8 m)
28 ft(8.5 m)
24 ft(7.3 m)
20 ft(6.1 m)
16 ft(4.9 m)
12 ft(3.7 m)
8 ft(2.4 m)
4 ft(1.2 m)
0 ft(0 m)
-4 ft(-1.2 m)
-8 ft(-2.4 m)
8 ft(2.4 m)
12 ft(3.7 m)
16 ft(4.9 m)
24 ft(7.3 m)
20 ft(6.1 m)
-4 ft(-1.2 m)
0 ft(0 m)
4 ft(1.2 m)
Specifi cations
The JLG “1 & 5” WarrantyJLG Industries, Inc. backs its products with its exclusive“1 & 5” Warranty. We provide coverage on all products forone (1) full year, and cover all specified major structuralcomponents for five (5) years. Due to continuous productimprovements, we reserve the right to make specificationand/or equipment changes without prior notification. Thismachine meets or exceeds applicable OSHA Regulationsin 29 CFR 1910.67, 29 CFR 1926.453, ANSI A92.5-2006,and CSA Standard CAN3-B354.2-M82, as originally manufac-tured for intended applications.
Form No.: SS-340AJ-12-20010Part No.: 3131121SR061202Printed in USA
Reach SpecificationsPlatform Height 33 ft 10 in. (10.31 m)Horizontal Reach 19 ft 11 in. (6.06 m)Up and Over Height 17 ft (5.17 m)Swing 355 Degrees Non-ContinuousPlatform Capacity 500 lb (227 kg)Platform Rotator 180 Degrees° HydraulicJib Length 4 ft (1.22 m)Jib Range of Articulation 144 Degrees (+84, -60)
Dimensional DataA. Platform Size 30 x 60 in. (0.76 x 1.22 m)B. Overall Width 6 ft 4 in. (1.93 m)C. Tailswing 2 in. (5.08 cm)D. Stowed Height 6 ft 7 in. (2 m)E. Stowed Length 18 ft 2in. (5.52 m),
13 ft (3.98 m) with Jib StowedF. Wheelbase 6 ft 2 in. (1.87 cm)G. Ground Clearance 10 in. (23.7 cm)Weight* 9,700 lb (4,400 kg)Max. Ground Bearing Pressure 151 psi (10.6 kg/cm2)
Kubota D1105 24.8 hp (18.5 kW)Fuel Tank Capacity 13 gal (498.2 L)Hydraulic Reservoir 20.6 gal (77.9 L)Auxiliary Power 12V DC
* Certain options may increase weight.
Model
340AJARTICULATING BOOM LIFTS
340AJARTICULATING BOOM LIFTS
Platform Height 10.33 m
Horizontal Outreach 6.06 m
Up and Over Height 5.17 m
Swing (non continuous) 355°
Platform Capacity – Unrestricted 230 kg
Platform Rotator (Hydraulic) 180°
Jib – Overall Length 1.22 m
Jib - Range of articulation 139° (+79°/-60°)
A. Platform Size 0.76 m x 1.52 m
B. Overall Width 1.93 m
C. Tailswing (working condition) 5 cm
D. Stowed Height 2.00 m
E. Stowed Length 1 5.52 m
F. Wheelbase 1.87 m
G. Ground Clearance 0.24 m
Machine weight 2 4,400 kg
Maximum Ground Bearing Pressure 4.5kg/cm2
Drive Speed 4WD 5 km/h
Gradeability 4WD 45%
Tyres (Foam Filled) 9 x 20
Axle Oscillation 0.15 m
Turning Radius – Inside 1.52 m
Turning Radius – Outside 3.96 m
Diesel Engine Kubota D1105 18.5 kW
Fuel Tank Capacity 45 L
Hydraulic System 75 L
Auxiliary Power 12V DC
1 May be reduced to 3.98 m for storage / transport.2 Certain options or country standards may increase weight and/or dimensions.
JLG is continually researching and developing products and reserves the right to make modifications without prior notice. All data in this document is indicative.Certain options or country standards will increase weight. Specifications may change to meet country standards or with the addition of optional equipment.
